ar71xx: drop target

This target has been mostly replaced by ath79 and won't be included
in the upcoming release anymore. Finally put it to rest.

This also removes all references in packages, tools, etc. as well as
the uboot-ar71xx and vsc73x5-ucode packages.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>

1 files changed, 0 insertions, 155 deletions

diff --git a/target/linux/ar71xx/base-files/lib/upgrade/allnet.sh b/target/linux/ar71xx/base-files/lib/upgrade/allnet.sh
deleted file mode 100644
index 5295d8cfe0..0000000000
--- a/target/linux/ar71xx/base-files/lib/upgrade/allnet.sh
+++ /dev/null
@@ -1,155 +0,0 @@
-# The U-Boot loader of the some Allnet devices requires image sizes and
-# checksums to be provided in the U-Boot environment.
-# In case the check fails during boot, a failsafe-system is started to provide
-# a minimal web-interface for flashing a new firmware.
-
-# determine size of the main firmware partition
-platform_get_firmware_size() {
-	local dev size erasesize name
-	while read dev size erasesize name; do
-		name=${name#'"'}; name=${name%'"'}
-		case "$name" in
-			firmware)
-				printf "%d" "0x$size"
-				break
-			;;
-		esac
-	done < /proc/mtd
-}
-
-# get the first 4 bytes (magic) of a given file starting at offset in hex format
-get_magic_long_at() {
-	dd if="$1" skip=$(( $CI_BLKSZ / 4 * $2 )) bs=4 count=1 2>/dev/null | hexdump -v -n 4 -e '1/1 "%02x"'
-}
-
-get_filesize() {
-	wc -c "$1" | while read image_size _n ; do echo $image_size ; break; done
-}
-
-# scan through the update image pages until matching a magic
-platform_get_offset() {
-	offsetcount=0
-	magiclong="x"
-	if [ -n "$3" ]; then
-		offsetcount=$3
-	fi
-	while magiclong=$( get_magic_long_at "$1" "$offsetcount" ) && [ -n "$magiclong" ]; do
-		case "$magiclong" in
-			"2705"*)
-				# U-Boot image magic
-				if [ "$2" = "uImage" ]; then
-					echo $offsetcount
-					return
-				fi
-			;;
-			"68737173"|"73717368")
-				# SquashFS
-				if [ "$2" = "rootfs" ]; then
-					echo $offsetcount
-					return
-				fi
-			;;
-			"deadc0de"|"19852003")
-				# JFFS2 empty page
-				if [ "$2" = "rootfs-data" ]; then
-					echo $offsetcount
-					return
-				fi
-			;;
-		esac
-		offsetcount=$(( $offsetcount + 1 ))
-	done
-}
-
-platform_check_image_allnet() {
-	local fw_printenv=/usr/sbin/fw_printenv
-	[ ! -n "$fw_printenv" -o ! -x "$fw_printenv" ] && {
-		echo "Please install uboot-envtools!"
-		return 1
-	}
-
-	[ ! -r "/etc/fw_env.config" ] && {
-		echo "/etc/fw_env.config is missing"
-		return 1
-	}
-
-	local image_size=$( get_filesize "$1" )
-	local firmware_size=$( platform_get_firmware_size )
-	[ $image_size -ge $firmware_size ] &&
-	{
-		echo "upgrade image is too big (${image_size}b > ${firmware_size}b)"
-	}
-
-	local vmlinux_blockoffset=$( platform_get_offset "$1" uImage )
-	[ -z $vmlinux_blockoffset ] && {
-		echo "vmlinux-uImage not found"
-		return 1
-	}
-
-	local rootfs_blockoffset=$( platform_get_offset "$1" rootfs "$vmlinux_blockoffset" )
-	[ -z $rootfs_blockoffset ] && {
-		echo "missing rootfs"
-		return 1
-	}
-
-	local data_blockoffset=$( platform_get_offset "$1" rootfs-data "$rootfs_blockoffset" )
-	[ -z $data_blockoffset ] && {
-		echo "rootfs doesn't have JFFS2 end marker"
-		return 1
-	}
-
-	return 0
-}
-
-platform_do_upgrade_allnet() {
-	local firmware_base_addr=$( printf "%d" "$1" )
-	local vmlinux_blockoffset=$( platform_get_offset "$2" uImage )
-	if [ ! -n "$vmlinux_blockoffset" ]; then
-		echo "can't determine uImage offset"
-		return 1
-	fi
-	local rootfs_blockoffset=$( platform_get_offset "$2" rootfs $(( $vmlinux_blockoffset + 1 )) )
-	local vmlinux_offset=$(( $vmlinux_blockoffset * $CI_BLKSZ ))
-	local vmlinux_addr=$(( $firmware_base_addr + $vmlinux_offset ))
-	local vmlinux_hexaddr=0x$( printf "%08x" "$vmlinux_addr" )
-	if [ ! -n "$rootfs_blockoffset" ]; then
-		echo "can't determine rootfs offset"
-		return 1
-	fi
-	local rootfs_offset=$(( $rootfs_blockoffset * $CI_BLKSZ ))
-	local rootfs_addr=$(( $firmware_base_addr + $rootfs_offset ))
-	local rootfs_hexaddr=0x$( printf "%08x" "$rootfs_addr" )
-	local vmlinux_blockcount=$(( $rootfs_blockoffset - $vmlinux_blockoffset ))
-	local vmlinux_size=$(( $rootfs_offset - $vmlinux_offset ))
-	local vmlinux_hexsize=0x$( printf "%08x" "$vmlinux_size" )
-	local data_blockoffset=$( platform_get_offset "$2" rootfs-data $(( $rootfs_blockoffset + 1 )) )
-	if [ ! -n "$data_blockoffset" ]; then
-		echo "can't determine rootfs size"
-		return 1
-	fi
-	local data_offset=$(( $data_blockoffset * $CI_BLKSZ ))
-	local rootfs_blockcount=$(( $data_blockoffset - $rootfs_blockoffset ))
-	local rootfs_size=$(( $data_offset - $rootfs_offset ))
-	local rootfs_hexsize=0x$( printf "%08x" "$rootfs_size" )
-
-	local rootfs_md5=$( dd if="$2" bs=$CI_BLKSZ skip=$rootfs_blockoffset count=$rootfs_blockcount 2>/dev/null | md5sum -); rootfs_md5="${rootfs_md5%% *}"
-	local vmlinux_md5=$( dd if="$2" bs=$CI_BLKSZ skip=$vmlinux_blockoffset count=$vmlinux_blockcount 2>/dev/null | md5sum -); vmlinux_md5="${vmlinux_md5%% *}"
-	# this needs a recent version of uboot-envtools!
-	cat >/tmp/fw_env_upgrade <<EOF
-vmlinux_start_addr $vmlinux_hexaddr
-vmlinux_size $vmlinux_hexsize
-vmlinux_checksum $vmlinux_md5
-rootfs_start_addr $rootfs_hexaddr
-rootfs_size $rootfs_hexsize
-rootfs_checksum $rootfs_md5
-bootcmd bootm $vmlinux_hexaddr
-EOF
-
-	mkdir -p /var/lock
-	fw_setenv -s /tmp/fw_env_upgrade || {
-		echo "failed to update U-Boot environment"
-		return 1
-	}
-	shift
-	default_do_upgrade "$@"
-}