aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/adm5120-2.6/image/lzma-loader
diff options
context:
space:
mode:
authorGabor Juhos <juhosg@openwrt.org>2007-07-09 16:36:19 +0000
committerGabor Juhos <juhosg@openwrt.org>2007-07-09 16:36:19 +0000
commit0e1921ab3c64838dce369538c2e0fcbebaed89ac (patch)
treeb3489b4ced0782c085b077e509858ac2b7bc699b /target/linux/adm5120-2.6/image/lzma-loader
parent6fe53385914e2004145455430d0282ace3c84ddf (diff)
downloadupstream-0e1921ab3c64838dce369538c2e0fcbebaed89ac.tar.gz
upstream-0e1921ab3c64838dce369538c2e0fcbebaed89ac.tar.bz2
upstream-0e1921ab3c64838dce369538c2e0fcbebaed89ac.zip
disable image generation for boards which we still have problems with (at least if CONFIG_DEVEL is not selected)
SVN-Revision: 7902
Diffstat (limited to 'target/linux/adm5120-2.6/image/lzma-loader')
-rw-r--r--target/linux/adm5120-2.6/image/lzma-loader/src/board.c20
1 files changed, 11 insertions, 9 deletions
diff --git a/target/linux/adm5120-2.6/image/lzma-loader/src/board.c b/target/linux/adm5120-2.6/image/lzma-loader/src/board.c
index 616e7562a8..baffe04ef1 100644
--- a/target/linux/adm5120-2.6/image/lzma-loader/src/board.c
+++ b/target/linux/adm5120-2.6/image/lzma-loader/src/board.c
@@ -1,5 +1,5 @@
/*
- * ADM5120 specific board support for LZMA decompressor
+ * ADM5120 specific board support for LZMA decompressor
*
* Copyright (C) 2007 OpenWrt.org
* Copyright (C) 2007 Gabor Juhos <juhosg@freemail.hu>
@@ -24,7 +24,7 @@
#define READREG(r) *(volatile unsigned int *)(r)
#define WRITEREG(r,v) *(volatile unsigned int *)(r) = v
-/*
+/*
* INTC definitions
*/
#define INTC_BASE 0xB2200000
@@ -32,7 +32,7 @@
/* INTC registers */
#define INTC_REG_IRQ_DISABLE 0x0C
-/*
+/*
* UART definitions
*/
#define UART_BASE 0xB2600000
@@ -61,7 +61,7 @@
#define UART_FLAG_RXFF ( 1 << 6 ) /* RX FIFO full */
#define UART_FLAG_TXFE ( 1 << 7 ) /* TX FIFO empty */
-/*
+/*
* SWITCH definitions
*/
#define SWITCH_BASE 0xB2000000
@@ -96,8 +96,9 @@
static void uart_init(void)
{
+#if 0
unsigned int t;
-
+
/* disable uart */
UART_WRITE(UART_REG_CTRL, 0);
@@ -106,7 +107,7 @@ static void uart_init(void)
UART_WRITE(UART_REG_LCRM, t);
t = UART_READ(UART_REG_LCRL);
UART_WRITE(UART_REG_LCRL, t);
-
+
/* keep data, stop, and parity bits, but disable FIFO */
t = UART_READ(UART_REG_LCRH);
t &= ~(UART_LCRH_FEN);
@@ -117,6 +118,7 @@ static void uart_init(void)
/* enable uart, and disable interrupts */
UART_WRITE(UART_REG_CTRL, UART_CTRL_EN);
+#endif
}
static void uart_putc(int ch)
@@ -125,7 +127,7 @@ static void uart_putc(int ch)
UART_WRITE(UART_REG_DATA, ch);
- while ((UART_READ(UART_REG_FLAG) & UART_FLAG_TXFF) != 0);
+ while ((UART_READ(UART_REG_FLAG) & UART_FLAG_TXFE) == 0);
}
/*
@@ -150,7 +152,7 @@ static void intc_init(void)
static void switch_init(void)
{
/* disable PHYS ports */
- SWITCH_WRITE(SWITCH_REG_PORT_CONF0,
+ SWITCH_WRITE(SWITCH_REG_PORT_CONF0,
(SWITCH_PORTS_HW << PORT_CONF0_DP_SHIFT));
/* disable CPU port */
@@ -159,7 +161,7 @@ static void switch_init(void)
/* disable GPIO lines */
SWITCH_WRITE(SWITCH_REG_GPIO_CONF0, 0);
SWITCH_WRITE(SWITCH_REG_GPIO_CONF2, 0);
-
+
/* disable LED lines */
SWITCH_WRITE(SWITCH_REG_PORT0_LED, 0);
SWITCH_WRITE(SWITCH_REG_PORT1_LED, 0);