aboutsummaryrefslogtreecommitdiffstats
path: root/package
diff options
context:
space:
mode:
authorMarek Lindner <marek.lindner@kaiwoo.ai>2018-11-25 21:46:54 +0800
committerPetr Štetiar <ynezz@true.cz>2020-12-22 19:11:50 +0100
commitea5bb6bbfee06f44f714aff40c8929505face221 (patch)
treec3ae619246530a997fffbc38ffde4a2e80b357e7 /package
parent8a891bfaa01d9592ea86c6b0cbbd5c04688c09f8 (diff)
downloadupstream-ea5bb6bbfee06f44f714aff40c8929505face221.tar.gz
upstream-ea5bb6bbfee06f44f714aff40c8929505face221.tar.bz2
upstream-ea5bb6bbfee06f44f714aff40c8929505face221.zip
ipq40xx: add support for Plasma Cloud PA1200
Device specifications: * QCA IPQ4018 * 256 MB of RAM * 32 MB of SPI NOR flash (w25q256) - 2x 15 MB available; but one of the 15 MB regions is the recovery image * 2T2R 2.4 GHz - QCA4019 hw1.0 (SoC) - requires special BDF in QCA4019/hw1.0/board-2.bin with bus=ahb,bmi-chip-id=0,bmi-board-id=16,variant=PlasmaCloud-PA1200 * 2T2R 5 GHz - QCA4019 hw1.0 (SoC) - requires special BDF in QCA4019/hw1.0/board-2.bin with bus=ahb,bmi-chip-id=0,bmi-board-id=17,variant=PlasmaCloud-PA1200 * 3x GPIO-LEDs for status (cyan, purple, yellow) * 1x GPIO-button (reset) * 1x USB (xHCI) * TTL pins are on board (arrow points to VCC, then follows: GND, TX, RX) * 2x gigabit ethernet - phy@mdio4: + Label: Ethernet 1 + gmac0 (ethaddr) in original firmware + used as LAN interface - phy@mdio3: + Label: Ethernet 2 + gmac1 (eth1addr) in original firmware + 802.3af/at POE(+) + used as WAN interface * 12V/24V 1A DC Flashing instructions: The tool ap51-flash (https://github.com/ap51-flash/ap51-flash) should be used to transfer the factory image to the u-boot when the device boots up. Signed-off-by: Marek Lindner <marek.lindner@kaiwoo.ai> [sven@narfation.org: prepare commit message, rebase, use all LEDs, switch to dualboot_datachk upgrade script, use eth1 as designated WAN interface] Signed-off-by: Sven Eckelmann <sven@narfation.org>
Diffstat (limited to 'package')
-rw-r--r--package/boot/uboot-envtools/files/ipq40xx3
-rw-r--r--package/firmware/ipq-wifi/Makefile2
-rw-r--r--package/firmware/ipq-wifi/board-plasmacloud_pa1200.ipq4019bin0 -> 24324 bytes
3 files changed, 4 insertions, 1 deletions
diff --git a/package/boot/uboot-envtools/files/ipq40xx b/package/boot/uboot-envtools/files/ipq40xx
index 27aab6b286..9252c0ffac 100644
--- a/package/boot/uboot-envtools/files/ipq40xx
+++ b/package/boot/uboot-envtools/files/ipq40xx
@@ -36,7 +36,8 @@ edgecore,ecw5211 |\
glinet,gl-b1300 |\
luma,wrtq-329acn |\
openmesh,a42 |\
-openmesh,a62)
+openmesh,a62 |\
+plasmacloud,pa1200)
ubootenv_add_uci_config "/dev/mtd5" "0x0" "0x10000" "0x10000"
;;
buffalo,wtr-m2133hp)
diff --git a/package/firmware/ipq-wifi/Makefile b/package/firmware/ipq-wifi/Makefile
index 9aa6852046..e26269a710 100644
--- a/package/firmware/ipq-wifi/Makefile
+++ b/package/firmware/ipq-wifi/Makefile
@@ -42,6 +42,7 @@ ALLWIFIBOARDS:= \
linksys_mr8300-v0 \
luma_wrtq-329acn \
mobipromo_cm520-79f \
+ plasmacloud_pa1200 \
qxwlan_e2600ac
ALLWIFIPACKAGES:=$(foreach BOARD,$(ALLWIFIBOARDS),ipq-wifi-$(BOARD))
@@ -120,6 +121,7 @@ $(eval $(call generate-ipq-wifi-package,linksys_ea8300,Linksys EA8300))
$(eval $(call generate-ipq-wifi-package,linksys_mr8300-v0,Linksys MR8300))
$(eval $(call generate-ipq-wifi-package,luma_wrtq-329acn,Luma WRTQ-329ACN))
$(eval $(call generate-ipq-wifi-package,mobipromo_cm520-79f,MobiPromo CM520-79F))
+$(eval $(call generate-ipq-wifi-package,plasmacloud_pa1200,Plasma Cloud PA1200))
$(eval $(call generate-ipq-wifi-package,qxwlan_e2600ac,Qxwlan E2600AC))
$(foreach PACKAGE,$(ALLWIFIPACKAGES),$(eval $(call BuildPackage,$(PACKAGE))))
diff --git a/package/firmware/ipq-wifi/board-plasmacloud_pa1200.ipq4019 b/package/firmware/ipq-wifi/board-plasmacloud_pa1200.ipq4019
new file mode 100644
index 0000000000..99d6df8c8c
--- /dev/null
+++ b/package/firmware/ipq-wifi/board-plasmacloud_pa1200.ipq4019
Binary files differ