Upgrade wpa_supplicant to 0.6.3 and add some improvements (mainly for roaming with ap_scan=1) Remove arch specific config files (they seem rather pointless) Remove the dependency on OpenSSL (use small built-in SSL functions)

SVN-Revision: 11833

1 files changed, 0 insertions, 181 deletions

diff --git a/package/wpa_supplicant/files/config.powerpc b/package/wpa_supplicant/files/config.powerpc
deleted file mode 100644
index 1d56e0615f..0000000000
--- a/package/wpa_supplicant/files/config.powerpc
+++ /dev/null
@@ -1,181 +0,0 @@
-# Example wpa_supplicant build time configuration
-#
-# This file lists the configuration options that are used when building the
-# hostapd binary. All lines starting with # are ignored. Configuration option
-# lines must be commented out complete, if they are not to be included, i.e.,
-# just setting VARIABLE=n is not disabling that variable.
-#
-# This file is included in Makefile, so variables like CFLAGS and LIBS can also
-# be modified from here. In most cases, these lines should use += in order not
-# to override previous values of the variables.
-
-
-# Uncomment following two lines and fix the paths if you have installed openssl
-# in non-default location
-#CFLAGS += -I/usr/local/openssl/include
-#LIBS += -L/usr/local/openssl/lib
-
-# Some Red Hat versions seem to include kerberos header files from OpenSSL, but
-# the kerberos files are not in the default include path. Following line can be
-# used to fix build issues on such systems (krb5.h not found).
-#CFLAGS += -I/usr/include/kerberos
-
-# Example configuration for various cross-compilation platforms
-
-#### sveasoft (e.g., for Linksys WRT54G) ######################################
-#CC=mipsel-uclibc-gcc
-#CC=/opt/brcm/hndtools-mipsel-uclibc/bin/mipsel-uclibc-gcc
-#CFLAGS += -Os
-#CPPFLAGS += -I../src/include -I../../src/router/openssl/include
-#LIBS += -L/opt/brcm/hndtools-mipsel-uclibc-0.9.19/lib -lssl
-###############################################################################
-
-#### openwrt (e.g., for Linksys WRT54G) #######################################
-#CC=mipsel-uclibc-gcc
-#CC=/opt/brcm/hndtools-mipsel-uclibc/bin/mipsel-uclibc-gcc
-#CFLAGS += -Os
-#CPPFLAGS=-I../src/include -I../openssl-0.9.7d/include \
-#	-I../WRT54GS/release/src/include
-#LIBS = -lssl
-###############################################################################
-
-
-# Driver interface for Host AP driver
-CONFIG_DRIVER_HOSTAP=y
-
-# Driver interface for Agere driver
-#CONFIG_DRIVER_HERMES=y
-# Change include directories to match with the local setup
-#CFLAGS += -I../../hcf -I../../include -I../../include/hcf
-#CFLAGS += -I../../include/wireless
-
-# Driver interface for madwifi driver
-#CONFIG_DRIVER_MADWIFI=y
-# Change include directories to match with the local setup
-#CFLAGS += -I../madwifi/wpa
-
-# Driver interface for Prism54 driver
-# (Note: Prism54 is not yet supported, i.e., this will not work as-is and is
-# for developers only)
-#CONFIG_DRIVER_PRISM54=y
-
-# Driver interface for ndiswrapper
-#CONFIG_DRIVER_NDISWRAPPER=y
-
-# Driver interface for Atmel driver
-CONFIG_DRIVER_ATMEL=y
-
-# Driver interface for Broadcom driver
-#CONFIG_DRIVER_BROADCOM=y
-# Example path for wlioctl.h; change to match your configuration
-#CFLAGS += -I/opt/WRT54GS/release/src/include
-
-# Driver interface for Intel ipw2100/2200 driver
-#CONFIG_DRIVER_IPW=y
-
-# Driver interface for generic Linux wireless extensions
-CONFIG_DRIVER_WEXT=y
-
-# Driver interface for FreeBSD net80211 layer (e.g., Atheros driver)
-#CONFIG_DRIVER_BSD=y
-#CFLAGS += -I/usr/local/include
-#LIBS += -L/usr/local/lib
-
-# Driver interface for Windows NDIS
-#CONFIG_DRIVER_NDIS=y
-#CFLAGS += -I/usr/include/w32api/ddk
-#LIBS += -L/usr/local/lib
-# For native build using mingw
-#CONFIG_NATIVE_WINDOWS=y
-# Additional directories for cross-compilation on Linux host for mingw target
-#CFLAGS += -I/opt/mingw/mingw32/include/ddk
-#LIBS += -L/opt/mingw/mingw32/lib
-#CC=mingw32-gcc
-
-# Driver interface for development testing
-#CONFIG_DRIVER_TEST=y
-
-# Driver interface for wired Ethernet drivers
-CONFIG_DRIVER_WIRED=y
-
-# Enable IEEE 802.1X Supplicant (automatically included if any EAP method is
-# included)
-CONFIG_IEEE8021X_EAPOL=y
-
-# EAP-MD5 (automatically included if EAP-TTLS is enabled)
-CONFIG_EAP_MD5=y
-
-# EAP-MSCHAPv2 (automatically included if EAP-PEAP is enabled)
-CONFIG_EAP_MSCHAPV2=y
-
-# EAP-TLS
-CONFIG_EAP_TLS=y
-
-# EAL-PEAP
-CONFIG_EAP_PEAP=y
-
-# EAP-TTLS
-CONFIG_EAP_TTLS=y
-
-# EAP-GTC
-CONFIG_EAP_GTC=y
-
-# EAP-OTP
-CONFIG_EAP_OTP=y
-
-# EAP-SIM (enable CONFIG_PCSC, if EAP-SIM is used)
-#CONFIG_EAP_SIM=y
-
-# EAP-PSK (experimental; this is _not_ needed for WPA-PSK)
-#CONFIG_EAP_PSK=y
-
-# EAP-PAX
-#CONFIG_EAP_PAX=y
-
-# LEAP
-CONFIG_EAP_LEAP=y
-
-# EAP-AKA (enable CONFIG_PCSC, if EAP-AKA is used)
-#CONFIG_EAP_AKA=y
-
-# PKCS#12 (PFX) support (used to read private key and certificate file from
-# a file that usually has extension .p12 or .pfx)
-CONFIG_PKCS12=y
-
-# Smartcard support (i.e., private key on a smartcard), e.g., with openssl
-# engine.
-CONFIG_SMARTCARD=y
-
-# PC/SC interface for smartcards (USIM, GSM SIM)
-# Enable this if EAP-SIM or EAP-AKA is included
-#CONFIG_PCSC=y
-
-# Development testing
-#CONFIG_EAPOL_TEST=y
-
-# Replace native Linux implementation of packet sockets with libdnet/libpcap.
-# This will be automatically set for non-Linux OS.
-#CONFIG_DNET_PCAP=y
-
-# Include control interface for external programs, e.g, wpa_cli
-CONFIG_CTRL_IFACE=y
-
-# Include support for GNU Readline and History Libraries in wpa_cli.
-# When building a wpa_cli binary for distribution, please note that these
-# libraries are licensed under GPL and as such, BSD license may not apply for
-# the resulting binary.
-#CONFIG_READLINE=y
-
-# Remove debugging code that is printing out debug message to stdout.
-# This can be used to reduce the size of the wpa_supplicant considerably
-# if debugging code is not needed. The size reduction can be around 35%
-# (e.g., 90 kB).
-#CONFIG_NO_STDOUT_DEBUG=y
-
-# Remove WPA support, e.g., for wired-only IEEE 802.1X supplicant, to save
-# 35-50 kB in code size.
-#CONFIG_NO_WPA=y
-
-# Select configuration backend:
-# file = text file (e.g., wpa_supplicant.conf)
-CONFIG_BACKEND=file