diff options
author | Adrian Schmutzler <freifunk@adrianschmutzler.de> | 2019-05-06 15:29:16 +0200 |
---|---|---|
committer | Christian Lamparter <chunkeey@gmail.com> | 2019-05-18 16:38:18 +0200 |
commit | d4b89b7170ab82530cfaf21e5f00bee7088432e2 (patch) | |
tree | d03aab5ed32694c3230857e30c6d0ebe1b84c9a2 /package/utils/usbmode/files/usbmode.hotplug | |
parent | 78ea648a3a4efef6b953b6c5958dc569e59d94df (diff) | |
download | upstream-d4b89b7170ab82530cfaf21e5f00bee7088432e2.tar.gz upstream-d4b89b7170ab82530cfaf21e5f00bee7088432e2.tar.bz2 upstream-d4b89b7170ab82530cfaf21e5f00bee7088432e2.zip |
ath79: Add support for TP-Link TL-WR1043N v5
Specifications:
- QCA9563 at 775 MHz
- 64 MB RAM Zentel A3R12E40CBF-8E
- 16 MB flash Winbond W25Q128FVSG
- 3 (non-detachable) Antennas / 450 Mbit
- 1x/4x WAN/LAN Gbps Ethernet (QCA8337)
- reset and Wi-Fi buttons
TP-Link TL-WR1043N v5 appears to be identical to the TL-WR1043ND v4,
except that the USB port has been removed and there is no longer a
removable antenna option. It also has different partitioning scheme.
The software is more in line with the Archer series in that it uses a
nested bootloader scheme.
(This has been adapted from the OpenWrt Wiki page)
<https://openwrt.org/toh/tp-link/tl-wr1043nd>
Installation on HW rev.5:
Factory firmware can be installed via the WEB interface.
Alternatively, it is also possible to use a TFTP server
for recovery purposes:
- Rename OpenWRT or original firmware to WR1043v5_tp_recovery.bin
- Set static IP of your PC to *192.168.0.66*
- Router will obtain IP 192.168.0.86 for a few seconds while
loading, when reset button pressed at power On.
And finally, there's always u-boot access through the UART.
For information visit the wiki.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
[reworked commit message]
Diffstat (limited to 'package/utils/usbmode/files/usbmode.hotplug')
0 files changed, 0 insertions, 0 deletions