busybox: unindent busybox Config.in

This is to align with upstream change 72089cf ("config: deindent all
help texts") and to make the follow-up change syncing Config.in files
with current busybox version more reviewable

It was made with the following commands

	cd package/utils/busybox/config
	find . -name 'Config.in' | xargs sed -ir -e 's/^\t  \([^ ]\)/\t\1/'

Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>

1 files changed, 314 insertions, 314 deletions

diff --git a/package/utils/busybox/config/util-linux/Config.in b/package/utils/busybox/config/util-linux/Config.in
index 9ce25e00ef..28b66fc818 100644
--- a/package/utils/busybox/config/util-linux/Config.in
+++ b/package/utils/busybox/config/util-linux/Config.in
@@ -11,89 +11,89 @@ config BUSYBOX_CONFIG_ACPID
 	default BUSYBOX_DEFAULT_ACPID
 	select BUSYBOX_CONFIG_PLATFORM_LINUX
 	help
-	  acpid listens to ACPI events coming either in textual form from
-	  /proc/acpi/event (though it is marked deprecated it is still widely
-	  used and _is_ a standard) or in binary form from specified evdevs
-	  (just use /dev/input/event*).
+	acpid listens to ACPI events coming either in textual form from
+	/proc/acpi/event (though it is marked deprecated it is still widely
+	used and _is_ a standard) or in binary form from specified evdevs
+	(just use /dev/input/event*).
 
-	  It parses the event to retrieve ACTION and a possible PARAMETER.
-	  It then spawns /etc/acpi/<ACTION>[/<PARAMETER>] either via run-parts
-	  (if the resulting path is a directory) or directly as an executable.
+	It parses the event to retrieve ACTION and a possible PARAMETER.
+	It then spawns /etc/acpi/<ACTION>[/<PARAMETER>] either via run-parts
+	(if the resulting path is a directory) or directly as an executable.
 
-	  N.B. acpid relies on run-parts so have the latter installed.
+	N.B. acpid relies on run-parts so have the latter installed.
 
 config BUSYBOX_CONFIG_FEATURE_ACPID_COMPAT
 	bool "Accept and ignore redundant options"
 	default BUSYBOX_DEFAULT_FEATURE_ACPID_COMPAT
 	depends on BUSYBOX_CONFIG_ACPID
 	help
-	  Accept and ignore compatibility options -g -m -s -S -v.
+	Accept and ignore compatibility options -g -m -s -S -v.
 config BUSYBOX_CONFIG_BLKDISCARD
 	bool "blkdiscard"
 	default BUSYBOX_DEFAULT_BLKDISCARD
 	help
-	  blkdiscard discards sectors on a given device.
+	blkdiscard discards sectors on a given device.
 config BUSYBOX_CONFIG_BLKID
 	bool "blkid"
 	default BUSYBOX_DEFAULT_BLKID
 	select BUSYBOX_CONFIG_PLATFORM_LINUX
 	select BUSYBOX_CONFIG_VOLUMEID
 	help
-	  Lists labels and UUIDs of all filesystems.
-	  WARNING:
-	  With all submodules selected, it will add ~8k to busybox.
+	Lists labels and UUIDs of all filesystems.
+	WARNING:
+	With all submodules selected, it will add ~8k to busybox.
 
 config BUSYBOX_CONFIG_FEATURE_BLKID_TYPE
 	bool "Print filesystem type"
 	default BUSYBOX_DEFAULT_FEATURE_BLKID_TYPE
 	depends on BUSYBOX_CONFIG_BLKID
 	help
-	  Show TYPE="filesystem type"
+	Show TYPE="filesystem type"
 config BUSYBOX_CONFIG_BLOCKDEV
 	bool "blockdev"
 	default BUSYBOX_DEFAULT_BLOCKDEV
 	help
-	  Performs some ioctls with block devices.
+	Performs some ioctls with block devices.
 config BUSYBOX_CONFIG_CAL
 	bool "cal"
 	default BUSYBOX_DEFAULT_CAL
 	help
-	  cal is used to display a monthly calendar.
+	cal is used to display a monthly calendar.
 config BUSYBOX_CONFIG_CHRT
 	bool "chrt"
 	default BUSYBOX_DEFAULT_CHRT
 	help
-	  manipulate real-time attributes of a process.
-	  This requires sched_{g,s}etparam support in your libc.
+	manipulate real-time attributes of a process.
+	This requires sched_{g,s}etparam support in your libc.
 config BUSYBOX_CONFIG_DMESG
 	bool "dmesg"
 	default BUSYBOX_DEFAULT_DMESG
 	select BUSYBOX_CONFIG_PLATFORM_LINUX
 	help
-	  dmesg is used to examine or control the kernel ring buffer. When the
-	  Linux kernel prints messages to the system log, they are stored in
-	  the kernel ring buffer. You can use dmesg to print the kernel's ring
-	  buffer, clear the kernel ring buffer, change the size of the kernel
-	  ring buffer, and change the priority level at which kernel messages
-	  are also logged to the system console. Enable this option if you
-	  wish to enable the 'dmesg' utility.
+	dmesg is used to examine or control the kernel ring buffer. When the
+	Linux kernel prints messages to the system log, they are stored in
+	the kernel ring buffer. You can use dmesg to print the kernel's ring
+	buffer, clear the kernel ring buffer, change the size of the kernel
+	ring buffer, and change the priority level at which kernel messages
+	are also logged to the system console. Enable this option if you
+	wish to enable the 'dmesg' utility.
 
 config BUSYBOX_CONFIG_FEATURE_DMESG_PRETTY
 	bool "Pretty output"
 	default BUSYBOX_DEFAULT_FEATURE_DMESG_PRETTY
 	depends on BUSYBOX_CONFIG_DMESG
 	help
-	  If you wish to scrub the syslog level from the output, say 'Y' here.
-	  The syslog level is a string prefixed to every line with the form
-	  "<#>".
+	If you wish to scrub the syslog level from the output, say 'Y' here.
+	The syslog level is a string prefixed to every line with the form
+	"<#>".
 
-	  With this option you will see:
+	With this option you will see:
 	    # dmesg
 	    Linux version 2.6.17.4 .....
 	    BIOS-provided physical RAM map:
 	     BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
 
-	  Without this option you will see:
+	Without this option you will see:
 	    # dmesg
 	    <5>Linux version 2.6.17.4 .....
 	    <6>BIOS-provided physical RAM map:
@@ -103,69 +103,69 @@ config BUSYBOX_CONFIG_EJECT
 	default BUSYBOX_DEFAULT_EJECT
 	select BUSYBOX_CONFIG_PLATFORM_LINUX
 	help
-	  Used to eject cdroms. (defaults to /dev/cdrom)
+	Used to eject cdroms. (defaults to /dev/cdrom)
 
 config BUSYBOX_CONFIG_FEATURE_EJECT_SCSI
 	bool "SCSI support"
 	default BUSYBOX_DEFAULT_FEATURE_EJECT_SCSI
 	depends on BUSYBOX_CONFIG_EJECT
 	help
-	  Add the -s option to eject, this allows to eject SCSI-Devices and
-	  usb-storage devices.
+	Add the -s option to eject, this allows to eject SCSI-Devices and
+	usb-storage devices.
 config BUSYBOX_CONFIG_FALLOCATE
 	bool "fallocate"
 	default BUSYBOX_DEFAULT_FALLOCATE
 	help
-	  Preallocate space for files.
+	Preallocate space for files.
 config BUSYBOX_CONFIG_FATATTR
 	bool "fatattr"
 	default BUSYBOX_DEFAULT_FATATTR
 	select BUSYBOX_CONFIG_PLATFORM_LINUX
 	help
-	  fatattr lists or changes the file attributes on a fat file system.
+	fatattr lists or changes the file attributes on a fat file system.
 config BUSYBOX_CONFIG_FBSET
 	bool "fbset"
 	default BUSYBOX_DEFAULT_FBSET
 	select BUSYBOX_CONFIG_PLATFORM_LINUX
 	help
-	  fbset is used to show or change the settings of a Linux frame buffer
-	  device. The frame buffer device provides a simple and unique
-	  interface to access a graphics display. Enable this option
-	  if you wish to enable the 'fbset' utility.
+	fbset is used to show or change the settings of a Linux frame buffer
+	device. The frame buffer device provides a simple and unique
+	interface to access a graphics display. Enable this option
+	if you wish to enable the 'fbset' utility.
 
 config BUSYBOX_CONFIG_FEATURE_FBSET_FANCY
 	bool "Enable extra options"
 	default BUSYBOX_DEFAULT_FEATURE_FBSET_FANCY
 	depends on BUSYBOX_CONFIG_FBSET
 	help
-	  This option enables extended fbset options, allowing one to set the
-	  framebuffer size, color depth, etc. interface to access a graphics
-	  display. Enable this option if you wish to enable extended fbset
-	  options.
+	This option enables extended fbset options, allowing one to set the
+	framebuffer size, color depth, etc. interface to access a graphics
+	display. Enable this option if you wish to enable extended fbset
+	options.
 
 config BUSYBOX_CONFIG_FEATURE_FBSET_READMODE
 	bool "Enable readmode support"
 	default BUSYBOX_DEFAULT_FEATURE_FBSET_READMODE
 	depends on BUSYBOX_CONFIG_FBSET
 	help
-	  This option allows fbset to read the video mode database stored by
-	  default BUSYBOX_DEFAULT_FEATURE_FBSET_READMODE /etc/fb.modes, which can be used to set frame buffer
-	  device to pre-defined video modes.
+	This option allows fbset to read the video mode database stored by
+	default BUSYBOX_DEFAULT_FEATURE_FBSET_READMODE /etc/fb.modes, which can be used to set frame buffer
+	device to pre-defined video modes.
 config BUSYBOX_CONFIG_FDFORMAT
 	bool "fdformat"
 	default BUSYBOX_DEFAULT_FDFORMAT
 	select BUSYBOX_CONFIG_PLATFORM_LINUX
 	help
-	  fdformat is used to low-level format a floppy disk.
+	fdformat is used to low-level format a floppy disk.
 config BUSYBOX_CONFIG_FDISK
 	bool "fdisk"
 	default BUSYBOX_DEFAULT_FDISK
 	select BUSYBOX_CONFIG_PLATFORM_LINUX
 	help
-	  The fdisk utility is used to divide hard disks into one or more
-	  logical disks, which are generally called partitions. This utility
-	  can be used to list and edit the set of partitions or BSD style
-	  'disk slices' that are defined on a hard drive.
+	The fdisk utility is used to divide hard disks into one or more
+	logical disks, which are generally called partitions. This utility
+	can be used to list and edit the set of partitions or BSD style
+	'disk slices' that are defined on a hard drive.
 
 config BUSYBOX_CONFIG_FDISK_SUPPORT_LARGE_DISKS
 	bool "Support over 4GB disks"
@@ -178,174 +178,174 @@ config BUSYBOX_CONFIG_FEATURE_FDISK_WRITABLE
 	default BUSYBOX_DEFAULT_FEATURE_FDISK_WRITABLE
 	depends on BUSYBOX_CONFIG_FDISK
 	help
-	  Enabling this option allows you to create or change a partition table
-	  and write those changes out to disk. If you leave this option
-	  disabled, you will only be able to view the partition table.
+	Enabling this option allows you to create or change a partition table
+	and write those changes out to disk. If you leave this option
+	disabled, you will only be able to view the partition table.
 
 config BUSYBOX_CONFIG_FEATURE_AIX_LABEL
 	bool "Support AIX disklabels"
 	default BUSYBOX_DEFAULT_FEATURE_AIX_LABEL
 	depends on BUSYBOX_CONFIG_FDISK && BUSYBOX_CONFIG_FEATURE_FDISK_WRITABLE
 	help
-	  Enabling this option allows you to create or change AIX disklabels.
-	  Most people can safely leave this option disabled.
+	Enabling this option allows you to create or change AIX disklabels.
+	Most people can safely leave this option disabled.
 
 config BUSYBOX_CONFIG_FEATURE_SGI_LABEL
 	bool "Support SGI disklabels"
 	default BUSYBOX_DEFAULT_FEATURE_SGI_LABEL
 	depends on BUSYBOX_CONFIG_FDISK && BUSYBOX_CONFIG_FEATURE_FDISK_WRITABLE
 	help
-	  Enabling this option allows you to create or change SGI disklabels.
-	  Most people can safely leave this option disabled.
+	Enabling this option allows you to create or change SGI disklabels.
+	Most people can safely leave this option disabled.
 
 config BUSYBOX_CONFIG_FEATURE_SUN_LABEL
 	bool "Support SUN disklabels"
 	default BUSYBOX_DEFAULT_FEATURE_SUN_LABEL
 	depends on BUSYBOX_CONFIG_FDISK && BUSYBOX_CONFIG_FEATURE_FDISK_WRITABLE
 	help
-	  Enabling this option allows you to create or change SUN disklabels.
-	  Most people can safely leave this option disabled.
+	Enabling this option allows you to create or change SUN disklabels.
+	Most people can safely leave this option disabled.
 
 config BUSYBOX_CONFIG_FEATURE_OSF_LABEL
 	bool "Support BSD disklabels"
 	default BUSYBOX_DEFAULT_FEATURE_OSF_LABEL
 	depends on BUSYBOX_CONFIG_FDISK && BUSYBOX_CONFIG_FEATURE_FDISK_WRITABLE
 	help
-	  Enabling this option allows you to create or change BSD disklabels
-	  and define and edit BSD disk slices.
+	Enabling this option allows you to create or change BSD disklabels
+	and define and edit BSD disk slices.
 
 config BUSYBOX_CONFIG_FEATURE_GPT_LABEL
 	bool "Support GPT disklabels"
 	default BUSYBOX_DEFAULT_FEATURE_GPT_LABEL
 	depends on BUSYBOX_CONFIG_FDISK && BUSYBOX_CONFIG_FEATURE_FDISK_WRITABLE
 	help
-	  Enabling this option allows you to view GUID Partition Table
-	  disklabels.
+	Enabling this option allows you to view GUID Partition Table
+	disklabels.
 
 config BUSYBOX_CONFIG_FEATURE_FDISK_ADVANCED
 	bool "Support expert mode"
 	default BUSYBOX_DEFAULT_FEATURE_FDISK_ADVANCED
 	depends on BUSYBOX_CONFIG_FDISK && BUSYBOX_CONFIG_FEATURE_FDISK_WRITABLE
 	help
-	  Enabling this option allows you to do terribly unsafe things like
-	  define arbitrary drive geometry, move the beginning of data in a
-	  partition, and similarly evil things. Unless you have a very good
-	  reason you would be wise to leave this disabled.
+	Enabling this option allows you to do terribly unsafe things like
+	define arbitrary drive geometry, move the beginning of data in a
+	partition, and similarly evil things. Unless you have a very good
+	reason you would be wise to leave this disabled.
 config BUSYBOX_CONFIG_FINDFS
 	bool "findfs"
 	default BUSYBOX_DEFAULT_FINDFS
 	select BUSYBOX_CONFIG_PLATFORM_LINUX
 	select BUSYBOX_CONFIG_VOLUMEID
 	help
-	  Prints the name of a filesystem with given label or UUID.
-	  WARNING:
-	  With all submodules selected, it will add ~8k to busybox.
+	Prints the name of a filesystem with given label or UUID.
+	WARNING:
+	With all submodules selected, it will add ~8k to busybox.
 config BUSYBOX_CONFIG_FLOCK
 	bool "flock"
 	default BUSYBOX_DEFAULT_FLOCK
 	help
-	  Manage locks from shell scripts
+	Manage locks from shell scripts
 config BUSYBOX_CONFIG_FDFLUSH
 	bool "fdflush"
 	default BUSYBOX_DEFAULT_FDFLUSH
 	select BUSYBOX_CONFIG_PLATFORM_LINUX
 	help
-	  fdflush is only needed when changing media on slightly-broken
-	  removable media drives. It is used to make Linux believe that a
-	  hardware disk-change switch has been actuated, which causes Linux to
-	  forget anything it has cached from the previous media. If you have
-	  such a slightly-broken drive, you will need to run fdflush every time
-	  you change a disk. Most people have working hardware and can safely
-	  leave this disabled.
+	fdflush is only needed when changing media on slightly-broken
+	removable media drives. It is used to make Linux believe that a
+	hardware disk-change switch has been actuated, which causes Linux to
+	forget anything it has cached from the previous media. If you have
+	such a slightly-broken drive, you will need to run fdflush every time
+	you change a disk. Most people have working hardware and can safely
+	leave this disabled.
 
 config BUSYBOX_CONFIG_FREERAMDISK
 	bool "freeramdisk"
 	default BUSYBOX_DEFAULT_FREERAMDISK
 	select BUSYBOX_CONFIG_PLATFORM_LINUX
 	help
-	  Linux allows you to create ramdisks. This utility allows you to
-	  delete them and completely free all memory that was used for the
-	  ramdisk. For example, if you boot Linux into a ramdisk and later
-	  pivot_root, you may want to free the memory that is allocated to the
-	  ramdisk. If you have no use for freeing memory from a ramdisk, leave
-	  this disabled.
+	Linux allows you to create ramdisks. This utility allows you to
+	delete them and completely free all memory that was used for the
+	ramdisk. For example, if you boot Linux into a ramdisk and later
+	pivot_root, you may want to free the memory that is allocated to the
+	ramdisk. If you have no use for freeing memory from a ramdisk, leave
+	this disabled.
 config BUSYBOX_CONFIG_FSCK_MINIX
 	bool "fsck_minix"
 	default BUSYBOX_DEFAULT_FSCK_MINIX
 	help
-	  The minix filesystem is a nice, small, compact, read-write filesystem
-	  with little overhead. It is not a journaling filesystem however and
-	  can experience corruption if it is not properly unmounted or if the
-	  power goes off in the middle of a write. This utility allows you to
-	  check for and attempt to repair any corruption that occurs to a minix
-	  filesystem.
+	The minix filesystem is a nice, small, compact, read-write filesystem
+	with little overhead. It is not a journaling filesystem however and
+	can experience corruption if it is not properly unmounted or if the
+	power goes off in the middle of a write. This utility allows you to
+	check for and attempt to repair any corruption that occurs to a minix
+	filesystem.
 config BUSYBOX_CONFIG_FSFREEZE
 	bool "fsfreeze"
 	default BUSYBOX_DEFAULT_FSFREEZE
 	select BUSYBOX_CONFIG_PLATFORM_LINUX
 	select BUSYBOX_CONFIG_LONG_OPTS
 	help
-	  Halt new accesses and flush writes on a mounted filesystem.
+	Halt new accesses and flush writes on a mounted filesystem.
 config BUSYBOX_CONFIG_FSTRIM
 	bool "fstrim"
 	default BUSYBOX_DEFAULT_FSTRIM
 	select BUSYBOX_CONFIG_PLATFORM_LINUX
 	help
-	  Discard unused blocks on a mounted filesystem.
+	Discard unused blocks on a mounted filesystem.
 config BUSYBOX_CONFIG_GETOPT
 	bool "getopt"
 	default BUSYBOX_DEFAULT_GETOPT
 	help
-	  The getopt utility is used to break up (parse) options in command
-	  lines to make it easy to write complex shell scripts that also check
-	  for legal (and illegal) options. If you want to write horribly
-	  complex shell scripts, or use some horribly complex shell script
-	  written by others, this utility may be for you. Most people will
-	  wisely leave this disabled.
+	The getopt utility is used to break up (parse) options in command
+	lines to make it easy to write complex shell scripts that also check
+	for legal (and illegal) options. If you want to write horribly
+	complex shell scripts, or use some horribly complex shell script
+	written by others, this utility may be for you. Most people will
+	wisely leave this disabled.
 
 config BUSYBOX_CONFIG_FEATURE_GETOPT_LONG
 	bool "Support option -l"
 	default BUSYBOX_DEFAULT_FEATURE_GETOPT_LONG if BUSYBOX_CONFIG_LONG_OPTS
 	depends on BUSYBOX_CONFIG_GETOPT
 	help
-	  Enable support for long options (option -l).
+	Enable support for long options (option -l).
 config BUSYBOX_CONFIG_HEXDUMP
 	bool "hexdump"
 	default BUSYBOX_DEFAULT_HEXDUMP
 	help
-	  The hexdump utility is used to display binary data in a readable
-	  way that is comparable to the output from most hex editors.
+	The hexdump utility is used to display binary data in a readable
+	way that is comparable to the output from most hex editors.
 
 config BUSYBOX_CONFIG_FEATURE_HEXDUMP_REVERSE
 	bool "Support -R, reverse of 'hexdump -Cv'"
 	default BUSYBOX_DEFAULT_FEATURE_HEXDUMP_REVERSE
 	depends on BUSYBOX_CONFIG_HEXDUMP
 	help
-	  The hexdump utility is used to display binary data in an ascii
-	  readable way. This option creates binary data from an ascii input.
-	  NB: this option is non-standard. It's unwise to use it in scripts
-	  aimed to be portable.
+	The hexdump utility is used to display binary data in an ascii
+	readable way. This option creates binary data from an ascii input.
+	NB: this option is non-standard. It's unwise to use it in scripts
+	aimed to be portable.
 
 config BUSYBOX_CONFIG_HD
 	bool "hd"
 	default BUSYBOX_DEFAULT_HD
 	help
-	  hd is an alias to hexdump -C.
+	hd is an alias to hexdump -C.
 config BUSYBOX_CONFIG_XXD
 	bool "xxd"
 	default BUSYBOX_DEFAULT_XXD
 	help
-	  The xxd utility is used to display binary data in a readable
-	  way that is comparable to the output from most hex editors.
+	The xxd utility is used to display binary data in a readable
+	way that is comparable to the output from most hex editors.
 config BUSYBOX_CONFIG_HWCLOCK
 	bool "hwclock"
 	default BUSYBOX_DEFAULT_HWCLOCK
 	select BUSYBOX_CONFIG_PLATFORM_LINUX
 	help
-	  The hwclock utility is used to read and set the hardware clock
-	  on a system. This is primarily used to set the current time on
-	  shutdown in the hardware clock, so the hardware will keep the
-	  correct time when Linux is _not_ running.
+	The hwclock utility is used to read and set the hardware clock
+	on a system. This is primarily used to set the current time on
+	shutdown in the hardware clock, so the hardware will keep the
+	correct time when Linux is _not_ running.
 
 config BUSYBOX_CONFIG_FEATURE_HWCLOCK_LONG_OPTIONS
 	bool "Support long options (--hctosys,...)"
@@ -357,265 +357,265 @@ config BUSYBOX_CONFIG_FEATURE_HWCLOCK_ADJTIME_FHS
 	default BUSYBOX_DEFAULT_FEATURE_HWCLOCK_ADJTIME_FHS  # util-linux-ng in Fedora 13 still uses /etc/adjtime
 	depends on BUSYBOX_CONFIG_HWCLOCK
 	help
-	  Starting with FHS 2.3, the adjtime state file is supposed to exist
-	  at /var/lib/hwclock/adjtime instead of /etc/adjtime. If you wish
-	  to use the FHS behavior, answer Y here, otherwise answer N for the
-	  classic /etc/adjtime path.
+	Starting with FHS 2.3, the adjtime state file is supposed to exist
+	at /var/lib/hwclock/adjtime instead of /etc/adjtime. If you wish
+	to use the FHS behavior, answer Y here, otherwise answer N for the
+	classic /etc/adjtime path.
 
-	  pathname.com/fhs/pub/fhs-2.3.html#VARLIBHWCLOCKSTATEDIRECTORYFORHWCLO
+	pathname.com/fhs/pub/fhs-2.3.html#VARLIBHWCLOCKSTATEDIRECTORYFORHWCLO
 config BUSYBOX_CONFIG_IONICE
 	bool "ionice"
 	default BUSYBOX_DEFAULT_IONICE
 	select BUSYBOX_CONFIG_PLATFORM_LINUX
 	help
-	  Set/set program io scheduling class and priority
-	  Requires kernel >= 2.6.13
+	Set/set program io scheduling class and priority
+	Requires kernel >= 2.6.13
 config BUSYBOX_CONFIG_IPCRM
 	bool "ipcrm"
 	default BUSYBOX_DEFAULT_IPCRM
 	help
-	  The ipcrm utility allows the removal of System V interprocess
-	  communication (IPC) objects and the associated data structures
-	  from the system.
+	The ipcrm utility allows the removal of System V interprocess
+	communication (IPC) objects and the associated data structures
+	from the system.
 config BUSYBOX_CONFIG_IPCS
 	bool "ipcs"
 	default BUSYBOX_DEFAULT_IPCS
 	select BUSYBOX_CONFIG_PLATFORM_LINUX
 	help
-	  The ipcs utility is used to provide information on the currently
-	  allocated System V interprocess (IPC) objects in the system.
+	The ipcs utility is used to provide information on the currently
+	allocated System V interprocess (IPC) objects in the system.
 config BUSYBOX_CONFIG_LAST
 	bool "last"
 	default BUSYBOX_DEFAULT_LAST
 	depends on BUSYBOX_CONFIG_FEATURE_WTMP
 	help
-	  'last' displays a list of the last users that logged into the system.
+	'last' displays a list of the last users that logged into the system.
 
 config BUSYBOX_CONFIG_FEATURE_LAST_FANCY
 	bool "Output extra information"
 	default BUSYBOX_DEFAULT_FEATURE_LAST_FANCY
 	depends on BUSYBOX_CONFIG_LAST
 	help
-	  'last' displays detailed information about the last users that
-	  logged into the system (mimics sysvinit last). +900 bytes.
+	'last' displays detailed information about the last users that
+	logged into the system (mimics sysvinit last). +900 bytes.
 config BUSYBOX_CONFIG_LOSETUP
 	bool "losetup"
 	default BUSYBOX_DEFAULT_LOSETUP
 	select BUSYBOX_CONFIG_PLATFORM_LINUX
 	help
-	  losetup is used to associate or detach a loop device with a regular
-	  file or block device, and to query the status of a loop device. This
-	  version does not currently support enabling data encryption.
+	losetup is used to associate or detach a loop device with a regular
+	file or block device, and to query the status of a loop device. This
+	version does not currently support enabling data encryption.
 config BUSYBOX_CONFIG_LSPCI
 	bool "lspci"
 	default BUSYBOX_DEFAULT_LSPCI
 	#select PLATFORM_LINUX
 	help
-	  lspci is a utility for displaying information about PCI buses in the
-	  system and devices connected to them.
+	lspci is a utility for displaying information about PCI buses in the
+	system and devices connected to them.
 
-	  This version uses sysfs (/sys/bus/pci/devices) only.
+	This version uses sysfs (/sys/bus/pci/devices) only.
 config BUSYBOX_CONFIG_LSUSB
 	bool "lsusb"
 	default BUSYBOX_DEFAULT_LSUSB
 	#select PLATFORM_LINUX
 	help
-	  lsusb is a utility for displaying information about USB buses in the
-	  system and devices connected to them.
+	lsusb is a utility for displaying information about USB buses in the
+	system and devices connected to them.
 
-	  This version uses sysfs (/sys/bus/usb/devices) only.
+	This version uses sysfs (/sys/bus/usb/devices) only.
 config BUSYBOX_CONFIG_MDEV
 	bool "mdev"
 	default BUSYBOX_DEFAULT_MDEV
 	select BUSYBOX_CONFIG_PLATFORM_LINUX
 	help
-	  mdev is a mini-udev implementation for dynamically creating device
-	  nodes in the /dev directory.
+	mdev is a mini-udev implementation for dynamically creating device
+	nodes in the /dev directory.
 
-	  For more information, please see docs/mdev.txt
+	For more information, please see docs/mdev.txt
 
 config BUSYBOX_CONFIG_FEATURE_MDEV_CONF
 	bool "Support /etc/mdev.conf"
 	default BUSYBOX_DEFAULT_FEATURE_MDEV_CONF
 	depends on BUSYBOX_CONFIG_MDEV
 	help
-	  Add support for the mdev config file to control ownership and
-	  permissions of the device nodes.
+	Add support for the mdev config file to control ownership and
+	permissions of the device nodes.
 
-	  For more information, please see docs/mdev.txt
+	For more information, please see docs/mdev.txt
 
 config BUSYBOX_CONFIG_FEATURE_MDEV_RENAME
 	bool "Support subdirs/symlinks"
 	default BUSYBOX_DEFAULT_FEATURE_MDEV_RENAME
 	depends on BUSYBOX_CONFIG_FEATURE_MDEV_CONF
 	help
-	  Add support for renaming devices and creating symlinks.
+	Add support for renaming devices and creating symlinks.
 
-	  For more information, please see docs/mdev.txt
+	For more information, please see docs/mdev.txt
 
 config BUSYBOX_CONFIG_FEATURE_MDEV_RENAME_REGEXP
 	bool "Support regular expressions substitutions when renaming device"
 	default BUSYBOX_DEFAULT_FEATURE_MDEV_RENAME_REGEXP
 	depends on BUSYBOX_CONFIG_FEATURE_MDEV_RENAME
 	help
-	  Add support for regular expressions substitutions when renaming
-	  device.
+	Add support for regular expressions substitutions when renaming
+	device.
 
 config BUSYBOX_CONFIG_FEATURE_MDEV_EXEC
 	bool "Support command execution at device addition/removal"
 	default BUSYBOX_DEFAULT_FEATURE_MDEV_EXEC
 	depends on BUSYBOX_CONFIG_FEATURE_MDEV_CONF
 	help
-	  This adds support for an optional field to /etc/mdev.conf for
-	  executing commands when devices are created/removed.
+	This adds support for an optional field to /etc/mdev.conf for
+	executing commands when devices are created/removed.
 
-	  For more information, please see docs/mdev.txt
+	For more information, please see docs/mdev.txt
 
 config BUSYBOX_CONFIG_FEATURE_MDEV_LOAD_FIRMWARE
 	bool "Support loading of firmwares"
 	default BUSYBOX_DEFAULT_FEATURE_MDEV_LOAD_FIRMWARE
 	depends on BUSYBOX_CONFIG_MDEV
 	help
-	  Some devices need to load firmware before they can be usable.
+	Some devices need to load firmware before they can be usable.
 
-	  These devices will request userspace look up the files in
-	  /lib/firmware/ and if it exists, send it to the kernel for
-	  loading into the hardware.
+	These devices will request userspace look up the files in
+	/lib/firmware/ and if it exists, send it to the kernel for
+	loading into the hardware.
 config BUSYBOX_CONFIG_MESG
 	bool "mesg"
 	default BUSYBOX_DEFAULT_MESG
 	help
-	  Mesg controls access to your terminal by others. It is typically
-	  used to allow or disallow other users to write to your terminal
+	Mesg controls access to your terminal by others. It is typically
+	used to allow or disallow other users to write to your terminal
 
 config BUSYBOX_CONFIG_FEATURE_MESG_ENABLE_ONLY_GROUP
 	bool "Enable writing to tty only by group, not by everybody"
 	default BUSYBOX_DEFAULT_FEATURE_MESG_ENABLE_ONLY_GROUP
 	depends on BUSYBOX_CONFIG_MESG
 	help
-	  Usually, ttys are owned by group "tty", and "write" tool is
-	  setgid to this group. This way, "mesg y" only needs to enable
-	  "write by owning group" bit in tty mode.
+	Usually, ttys are owned by group "tty", and "write" tool is
+	setgid to this group. This way, "mesg y" only needs to enable
+	"write by owning group" bit in tty mode.
 
-	  If you set this option to N, "mesg y" will enable writing
-	  by anybody at all. This is not recommended.
+	If you set this option to N, "mesg y" will enable writing
+	by anybody at all. This is not recommended.
 config BUSYBOX_CONFIG_MKE2FS
 	bool "mke2fs"
 	default BUSYBOX_DEFAULT_MKE2FS
 	select BUSYBOX_CONFIG_PLATFORM_LINUX
 	help
-	  Utility to create EXT2 filesystems.
+	Utility to create EXT2 filesystems.
 
 config BUSYBOX_CONFIG_MKFS_EXT2
 	bool "mkfs.ext2"
 	default BUSYBOX_DEFAULT_MKFS_EXT2
 	select BUSYBOX_CONFIG_PLATFORM_LINUX
 	help
-	  Alias to "mke2fs".
+	Alias to "mke2fs".
 config BUSYBOX_CONFIG_MKFS_MINIX
 	bool "mkfs_minix"
 	default BUSYBOX_DEFAULT_MKFS_MINIX
 	select BUSYBOX_CONFIG_PLATFORM_LINUX
 	help
-	  The minix filesystem is a nice, small, compact, read-write filesystem
-	  with little overhead. If you wish to be able to create minix
-	  filesystems this utility will do the job for you.
+	The minix filesystem is a nice, small, compact, read-write filesystem
+	with little overhead. If you wish to be able to create minix
+	filesystems this utility will do the job for you.
 
 config BUSYBOX_CONFIG_FEATURE_MINIX2
 	bool "Support Minix fs v2 (fsck_minix/mkfs_minix)"
 	default BUSYBOX_DEFAULT_FEATURE_MINIX2
 	depends on BUSYBOX_CONFIG_FSCK_MINIX || BUSYBOX_CONFIG_MKFS_MINIX
 	help
-	  If you wish to be able to create version 2 minix filesystems, enable
-	  this. If you enabled 'mkfs_minix' then you almost certainly want to
-	  be using the version 2 filesystem support.
+	If you wish to be able to create version 2 minix filesystems, enable
+	this. If you enabled 'mkfs_minix' then you almost certainly want to
+	be using the version 2 filesystem support.
 config BUSYBOX_CONFIG_MKFS_REISER
 	bool "mkfs_reiser"
 	default BUSYBOX_DEFAULT_MKFS_REISER
 	select BUSYBOX_CONFIG_PLATFORM_LINUX
 	help
-	  Utility to create ReiserFS filesystems.
-	  Note: this applet needs a lot of testing and polishing.
+	Utility to create ReiserFS filesystems.
+	Note: this applet needs a lot of testing and polishing.
 config BUSYBOX_CONFIG_MKDOSFS
 	bool "mkdosfs"
 	default BUSYBOX_DEFAULT_MKDOSFS
 	select BUSYBOX_CONFIG_PLATFORM_LINUX
 	help
-	  Utility to create FAT32 filesystems.
+	Utility to create FAT32 filesystems.
 
 config BUSYBOX_CONFIG_MKFS_VFAT
 	bool "mkfs.vfat"
 	default BUSYBOX_DEFAULT_MKFS_VFAT
 	select BUSYBOX_CONFIG_PLATFORM_LINUX
 	help
-	  Alias to "mkdosfs".
+	Alias to "mkdosfs".
 config BUSYBOX_CONFIG_MKSWAP
 	bool "mkswap"
 	default BUSYBOX_DEFAULT_MKSWAP
 	help
-	  The mkswap utility is used to configure a file or disk partition as
-	  Linux swap space. This allows Linux to use the entire file or
-	  partition as if it were additional RAM, which can greatly increase
-	  the capability of low-memory machines. This additional memory is
-	  much slower than real RAM, but can be very helpful at preventing your
-	  applications being killed by the Linux out of memory (OOM) killer.
-	  Once you have created swap space using 'mkswap' you need to enable
-	  the swap space using the 'swapon' utility.
+	The mkswap utility is used to configure a file or disk partition as
+	Linux swap space. This allows Linux to use the entire file or
+	partition as if it were additional RAM, which can greatly increase
+	the capability of low-memory machines. This additional memory is
+	much slower than real RAM, but can be very helpful at preventing your
+	applications being killed by the Linux out of memory (OOM) killer.
+	Once you have created swap space using 'mkswap' you need to enable
+	the swap space using the 'swapon' utility.
 
 config BUSYBOX_CONFIG_FEATURE_MKSWAP_UUID
 	bool "UUID support"
 	default BUSYBOX_DEFAULT_FEATURE_MKSWAP_UUID
 	depends on BUSYBOX_CONFIG_MKSWAP
 	help
-	  Generate swap spaces with universally unique identifiers.
+	Generate swap spaces with universally unique identifiers.
 config BUSYBOX_CONFIG_MORE
 	bool "more"
 	default BUSYBOX_DEFAULT_MORE
 	help
-	  more is a simple utility which allows you to read text one screen
-	  sized page at a time. If you want to read text that is larger than
-	  the screen, and you are using anything faster than a 300 baud modem,
-	  you will probably find this utility very helpful. If you don't have
-	  any need to reading text files, you can leave this disabled.
+	more is a simple utility which allows you to read text one screen
+	sized page at a time. If you want to read text that is larger than
+	the screen, and you are using anything faster than a 300 baud modem,
+	you will probably find this utility very helpful. If you don't have
+	any need to reading text files, you can leave this disabled.
 config BUSYBOX_CONFIG_MOUNT
 	bool "mount"
 	default BUSYBOX_DEFAULT_MOUNT
 	select BUSYBOX_CONFIG_PLATFORM_LINUX
 	help
-	  All files and filesystems in Unix are arranged into one big directory
-	  tree. The 'mount' utility is used to graft a filesystem onto a
-	  particular part of the tree. A filesystem can either live on a block
-	  device, or it can be accessible over the network, as is the case with
-	  NFS filesystems. Most people using BusyBox will also want to enable
-	  the 'mount' utility.
+	All files and filesystems in Unix are arranged into one big directory
+	tree. The 'mount' utility is used to graft a filesystem onto a
+	particular part of the tree. A filesystem can either live on a block
+	device, or it can be accessible over the network, as is the case with
+	NFS filesystems. Most people using BusyBox will also want to enable
+	the 'mount' utility.
 
 config BUSYBOX_CONFIG_FEATURE_MOUNT_FAKE
 	bool "Support option -f"
 	default BUSYBOX_DEFAULT_FEATURE_MOUNT_FAKE
 	depends on BUSYBOX_CONFIG_MOUNT
 	help
-	  Enable support for faking a file system mount.
+	Enable support for faking a file system mount.
 
 config BUSYBOX_CONFIG_FEATURE_MOUNT_VERBOSE
 	bool "Support option -v"
 	default BUSYBOX_DEFAULT_FEATURE_MOUNT_VERBOSE
 	depends on BUSYBOX_CONFIG_MOUNT
 	help
-	  Enable multi-level -v[vv...] verbose messages. Useful if you
-	  debug mount problems and want to see what is exactly passed
-	  to the kernel.
+	Enable multi-level -v[vv...] verbose messages. Useful if you
+	debug mount problems and want to see what is exactly passed
+	to the kernel.
 
 config BUSYBOX_CONFIG_FEATURE_MOUNT_HELPERS
 	bool "Support mount helpers"
 	default BUSYBOX_DEFAULT_FEATURE_MOUNT_HELPERS
 	depends on BUSYBOX_CONFIG_MOUNT
 	help
-	  Enable mounting of virtual file systems via external helpers.
-	  E.g. "mount obexfs#-b00.11.22.33.44.55 /mnt" will in effect call
-	  "obexfs -b00.11.22.33.44.55 /mnt"
-	  Also "mount -t sometype [-o opts] fs /mnt" will try
-	  "sometype [-o opts] fs /mnt" if simple mount syscall fails.
-	  The idea is to use such virtual filesystems in /etc/fstab.
+	Enable mounting of virtual file systems via external helpers.
+	E.g. "mount obexfs#-b00.11.22.33.44.55 /mnt" will in effect call
+	"obexfs -b00.11.22.33.44.55 /mnt"
+	Also "mount -t sometype [-o opts] fs /mnt" will try
+	"sometype [-o opts] fs /mnt" if simple mount syscall fails.
+	The idea is to use such virtual filesystems in /etc/fstab.
 
 config BUSYBOX_CONFIG_FEATURE_MOUNT_LABEL
 	bool "Support specifying devices by label or UUID"
@@ -623,245 +623,245 @@ config BUSYBOX_CONFIG_FEATURE_MOUNT_LABEL
 	depends on BUSYBOX_CONFIG_MOUNT
 	select BUSYBOX_CONFIG_VOLUMEID
 	help
-	  This allows for specifying a device by label or uuid, rather than by
-	  name. This feature utilizes the same functionality as blkid/findfs.
-	  This also enables label or uuid support for swapon.
+	This allows for specifying a device by label or uuid, rather than by
+	name. This feature utilizes the same functionality as blkid/findfs.
+	This also enables label or uuid support for swapon.
 
 config BUSYBOX_CONFIG_FEATURE_MOUNT_CIFS
 	bool "Support mounting CIFS/SMB file systems"
 	default BUSYBOX_DEFAULT_FEATURE_MOUNT_CIFS
 	depends on BUSYBOX_CONFIG_MOUNT
 	help
-	  Enable support for samba mounts.
+	Enable support for samba mounts.
 
 config BUSYBOX_CONFIG_FEATURE_MOUNT_FLAGS
 	depends on BUSYBOX_CONFIG_MOUNT
 	bool "Support lots of -o flags"
 	default BUSYBOX_DEFAULT_FEATURE_MOUNT_FLAGS
 	help
-	  Without this, mount only supports ro/rw/remount. With this, it
-	  supports nosuid, suid, dev, nodev, exec, noexec, sync, async, atime,
-	  noatime, diratime, nodiratime, loud, bind, move, shared, slave,
-	  private, unbindable, rshared, rslave, rprivate, and runbindable.
+	Without this, mount only supports ro/rw/remount. With this, it
+	supports nosuid, suid, dev, nodev, exec, noexec, sync, async, atime,
+	noatime, diratime, nodiratime, loud, bind, move, shared, slave,
+	private, unbindable, rshared, rslave, rprivate, and runbindable.
 
 config BUSYBOX_CONFIG_FEATURE_MOUNT_FSTAB
 	depends on BUSYBOX_CONFIG_MOUNT
 	bool "Support /etc/fstab and -a"
 	default BUSYBOX_DEFAULT_FEATURE_MOUNT_FSTAB
 	help
-	  Support mount all and looking for files in /etc/fstab.
+	Support mount all and looking for files in /etc/fstab.
 
 config BUSYBOX_CONFIG_FEATURE_MOUNT_OTHERTAB
 	depends on BUSYBOX_CONFIG_FEATURE_MOUNT_FSTAB
 	bool "Support -T <alt_fstab>"
 	default BUSYBOX_DEFAULT_FEATURE_MOUNT_OTHERTAB
 	help
-	  Support mount -T (specifying an alternate fstab)
+	Support mount -T (specifying an alternate fstab)
 config BUSYBOX_CONFIG_MOUNTPOINT
 	bool "mountpoint"
 	default BUSYBOX_DEFAULT_MOUNTPOINT
 	help
-	  mountpoint checks if the directory is a mountpoint.
+	mountpoint checks if the directory is a mountpoint.
 config BUSYBOX_CONFIG_NSENTER
 	bool "nsenter"
 	default BUSYBOX_DEFAULT_NSENTER
 	select BUSYBOX_CONFIG_PLATFORM_LINUX
 	help
-	  Run program with namespaces of other processes.
+	Run program with namespaces of other processes.
 
 config BUSYBOX_CONFIG_FEATURE_NSENTER_LONG_OPTS
 	bool "Enable long options"
 	default BUSYBOX_DEFAULT_FEATURE_NSENTER_LONG_OPTS
 	depends on BUSYBOX_CONFIG_NSENTER && BUSYBOX_CONFIG_LONG_OPTS
 	help
-	  Support long options for the nsenter applet. This makes
-	  the busybox implementation more compatible with upstream.
+	Support long options for the nsenter applet. This makes
+	the busybox implementation more compatible with upstream.
 config BUSYBOX_CONFIG_PIVOT_ROOT
 	bool "pivot_root"
 	default BUSYBOX_DEFAULT_PIVOT_ROOT
 	select BUSYBOX_CONFIG_PLATFORM_LINUX
 	help
-	  The pivot_root utility swaps the mount points for the root filesystem
-	  with some other mounted filesystem. This allows you to do all sorts
-	  of wild and crazy things with your Linux system and is far more
-	  powerful than 'chroot'.
+	The pivot_root utility swaps the mount points for the root filesystem
+	with some other mounted filesystem. This allows you to do all sorts
+	of wild and crazy things with your Linux system and is far more
+	powerful than 'chroot'.
 
-	  Note: This is for initrd in linux 2.4. Under initramfs (introduced
-	  in linux 2.6) use switch_root instead.
+	Note: This is for initrd in linux 2.4. Under initramfs (introduced
+	in linux 2.6) use switch_root instead.
 config BUSYBOX_CONFIG_RDATE
 	bool "rdate"
 	default BUSYBOX_DEFAULT_RDATE
 	help
-	  The rdate utility allows you to synchronize the date and time of your
-	  system clock with the date and time of a remote networked system using
-	  the RFC868 protocol, which is built into the inetd daemon on most
-	  systems.
+	The rdate utility allows you to synchronize the date and time of your
+	system clock with the date and time of a remote networked system using
+	the RFC868 protocol, which is built into the inetd daemon on most
+	systems.
 config BUSYBOX_CONFIG_RDEV
 	bool "rdev"
 	default BUSYBOX_DEFAULT_RDEV
 	help
-	  Print the device node associated with the filesystem mounted at '/'.
+	Print the device node associated with the filesystem mounted at '/'.
 config BUSYBOX_CONFIG_READPROFILE
 	bool "readprofile"
 	default BUSYBOX_DEFAULT_READPROFILE
 	#select PLATFORM_LINUX
 	help
-	  This allows you to parse /proc/profile for basic profiling.
+	This allows you to parse /proc/profile for basic profiling.
 config BUSYBOX_CONFIG_RENICE
 	bool "renice"
 	default BUSYBOX_DEFAULT_RENICE
 	help
-	  Renice alters the scheduling priority of one or more running
-	  processes.
+	Renice alters the scheduling priority of one or more running
+	processes.
 config BUSYBOX_CONFIG_REV
 	bool "rev"
 	default BUSYBOX_DEFAULT_REV
 	help
-	  Reverse lines of a file or files.
+	Reverse lines of a file or files.
 config BUSYBOX_CONFIG_RTCWAKE
 	bool "rtcwake"
 	default BUSYBOX_DEFAULT_RTCWAKE
 	select BUSYBOX_CONFIG_PLATFORM_LINUX
 	help
-	  Enter a system sleep state until specified wakeup time.
+	Enter a system sleep state until specified wakeup time.
 config BUSYBOX_CONFIG_SCRIPT
 	bool "script"
 	default BUSYBOX_DEFAULT_SCRIPT
 	help
-	  The script makes typescript of terminal session.
+	The script makes typescript of terminal session.
 config BUSYBOX_CONFIG_SCRIPTREPLAY
 	bool "scriptreplay"
 	default BUSYBOX_DEFAULT_SCRIPTREPLAY
 	help
-	  This program replays a typescript, using timing information
-	  given by script -t.
+	This program replays a typescript, using timing information
+	given by script -t.
 config BUSYBOX_CONFIG_SETARCH
 	bool "setarch"
 	default BUSYBOX_DEFAULT_SETARCH
 	select BUSYBOX_CONFIG_PLATFORM_LINUX
 	help
-	  The linux32 utility is used to create a 32bit environment for the
-	  specified program (usually a shell). It only makes sense to have
-	  this util on a system that supports both 64bit and 32bit userland
-	  (like amd64/x86, ppc64/ppc, sparc64/sparc, etc...).
+	The linux32 utility is used to create a 32bit environment for the
+	specified program (usually a shell). It only makes sense to have
+	this util on a system that supports both 64bit and 32bit userland
+	(like amd64/x86, ppc64/ppc, sparc64/sparc, etc...).
 
 config BUSYBOX_CONFIG_LINUX32
 	bool "linux32"
 	default BUSYBOX_DEFAULT_LINUX32
 	select BUSYBOX_CONFIG_PLATFORM_LINUX
 	help
-	  Alias to "setarch linux32".
+	Alias to "setarch linux32".
 
 config BUSYBOX_CONFIG_LINUX64
 	bool "linux64"
 	default BUSYBOX_DEFAULT_LINUX64
 	select BUSYBOX_CONFIG_PLATFORM_LINUX
 	help
-	  Alias to "setarch linux64".
+	Alias to "setarch linux64".
 config BUSYBOX_CONFIG_SETPRIV
 	bool "setpriv"
 	default BUSYBOX_DEFAULT_SETPRIV
 	select BUSYBOX_CONFIG_PLATFORM_LINUX
 	select BUSYBOX_CONFIG_LONG_OPTS
 	help
-	  Run a program with different Linux privilege settings.
-	  Requires kernel >= 3.5
+	Run a program with different Linux privilege settings.
+	Requires kernel >= 3.5
 config BUSYBOX_CONFIG_SETSID
 	bool "setsid"
 	default BUSYBOX_DEFAULT_SETSID
 	help
-	  setsid runs a program in a new session
+	setsid runs a program in a new session
 config BUSYBOX_CONFIG_SWAPON
 	bool "swapon"
 	default BUSYBOX_DEFAULT_SWAPON
 	select BUSYBOX_CONFIG_PLATFORM_LINUX
 	help
-	  This option enables the 'swapon' utility.
-	  Once you have created some swap space using 'mkswap', you also need
-	  to enable your swap space with the 'swapon' utility. The 'swapoff'
-	  utility is used, typically at system shutdown, to disable any swap
-	  space. If you are not using any swap space, you can leave this
-	  option disabled.
+	This option enables the 'swapon' utility.
+	Once you have created some swap space using 'mkswap', you also need
+	to enable your swap space with the 'swapon' utility. The 'swapoff'
+	utility is used, typically at system shutdown, to disable any swap
+	space. If you are not using any swap space, you can leave this
+	option disabled.
 
 config BUSYBOX_CONFIG_FEATURE_SWAPON_DISCARD
 	bool "Support discard option -d"
 	default BUSYBOX_DEFAULT_FEATURE_SWAPON_DISCARD
 	depends on BUSYBOX_CONFIG_SWAPON
 	help
-	  Enable support for discarding swap area blocks at swapon and/or as
-	  the kernel frees them. This option enables both the -d option on
-	  'swapon' and the 'discard' option for swap entries in /etc/fstab.
+	Enable support for discarding swap area blocks at swapon and/or as
+	the kernel frees them. This option enables both the -d option on
+	'swapon' and the 'discard' option for swap entries in /etc/fstab.
 
 config BUSYBOX_CONFIG_FEATURE_SWAPON_PRI
 	bool "Support priority option -p"
 	default BUSYBOX_DEFAULT_FEATURE_SWAPON_PRI
 	depends on BUSYBOX_CONFIG_SWAPON
 	help
-	  Enable support for setting swap device priority in swapon.
+	Enable support for setting swap device priority in swapon.
 
 config BUSYBOX_CONFIG_SWAPOFF
 	bool "swapoff"
 	default BUSYBOX_DEFAULT_SWAPOFF
 	select BUSYBOX_CONFIG_PLATFORM_LINUX
 	help
-	  This option enables the 'swapoff' utility.
+	This option enables the 'swapoff' utility.
 config BUSYBOX_CONFIG_SWITCH_ROOT
 	bool "switch_root"
 	default BUSYBOX_DEFAULT_SWITCH_ROOT
 	select BUSYBOX_CONFIG_PLATFORM_LINUX
 	help
-	  The switch_root utility is used from initramfs to select a new
-	  root device. Under initramfs, you have to use this instead of
-	  pivot_root. (Stop reading here if you don't care why.)
+	The switch_root utility is used from initramfs to select a new
+	root device. Under initramfs, you have to use this instead of
+	pivot_root. (Stop reading here if you don't care why.)
 
-	  Booting with initramfs extracts a gzipped cpio archive into rootfs
-	  (which is a variant of ramfs/tmpfs). Because rootfs can't be moved
-	  or unmounted*, pivot_root will not work from initramfs. Instead,
-	  switch_root deletes everything out of rootfs (including itself),
-	  does a mount --move that overmounts rootfs with the new root, and
-	  then execs the specified init program.
+	Booting with initramfs extracts a gzipped cpio archive into rootfs
+	(which is a variant of ramfs/tmpfs). Because rootfs can't be moved
+	or unmounted*, pivot_root will not work from initramfs. Instead,
+	switch_root deletes everything out of rootfs (including itself),
+	does a mount --move that overmounts rootfs with the new root, and
+	then execs the specified init program.
 
-	  * Because the Linux kernel uses rootfs internally as the starting
-	  and ending point for searching through the kernel's doubly linked
-	  list of active mount points. That's why.
+	* Because the Linux kernel uses rootfs internally as the starting
+	and ending point for searching through the kernel's doubly linked
+	list of active mount points. That's why.
 config BUSYBOX_CONFIG_TASKSET
 	bool "taskset"
 	default BUSYBOX_DEFAULT_TASKSET
 	help
-	  Retrieve or set a processes's CPU affinity.
-	  This requires sched_{g,s}etaffinity support in your libc.
+	Retrieve or set a processes's CPU affinity.
+	This requires sched_{g,s}etaffinity support in your libc.
 
 config BUSYBOX_CONFIG_FEATURE_TASKSET_FANCY
 	bool "Fancy output"
 	default BUSYBOX_DEFAULT_FEATURE_TASKSET_FANCY
 	depends on BUSYBOX_CONFIG_TASKSET
 	help
-	  Needed for machines with more than 32-64 CPUs:
-	  affinity parameter 0xHHHHHHHHHHHHHHHHHHHH can be arbitrarily long
-	  in this case. Otherwise, it is limited to sizeof(long).
+	Needed for machines with more than 32-64 CPUs:
+	affinity parameter 0xHHHHHHHHHHHHHHHHHHHH can be arbitrarily long
+	in this case. Otherwise, it is limited to sizeof(long).
 config BUSYBOX_CONFIG_UEVENT
 	bool "uevent"
 	default BUSYBOX_DEFAULT_UEVENT
 	select BUSYBOX_CONFIG_PLATFORM_LINUX
 	help
-	  uevent is a netlink listener for kernel uevent notifications
-	  sent via netlink. It is usually used for dynamic device creation.
+	uevent is a netlink listener for kernel uevent notifications
+	sent via netlink. It is usually used for dynamic device creation.
 config BUSYBOX_CONFIG_UMOUNT
 	bool "umount"
 	default BUSYBOX_DEFAULT_UMOUNT
 	select BUSYBOX_CONFIG_PLATFORM_LINUX
 	help
-	  When you want to remove a mounted filesystem from its current mount
-	  point, for example when you are shutting down the system, the
-	  'umount' utility is the tool to use. If you enabled the 'mount'
-	  utility, you almost certainly also want to enable 'umount'.
+	When you want to remove a mounted filesystem from its current mount
+	point, for example when you are shutting down the system, the
+	'umount' utility is the tool to use. If you enabled the 'mount'
+	utility, you almost certainly also want to enable 'umount'.
 
 config BUSYBOX_CONFIG_FEATURE_UMOUNT_ALL
 	bool "Support option -a"
 	default BUSYBOX_DEFAULT_FEATURE_UMOUNT_ALL
 	depends on BUSYBOX_CONFIG_UMOUNT
 	help
-	  Support -a option to unmount all currently mounted filesystems.
+	Support -a option to unmount all currently mounted filesystems.
 config BUSYBOX_CONFIG_UNSHARE
 	bool "unshare"
 	default BUSYBOX_DEFAULT_UNSHARE
@@ -869,13 +869,13 @@ config BUSYBOX_CONFIG_UNSHARE
 	select BUSYBOX_CONFIG_PLATFORM_LINUX
 	select BUSYBOX_CONFIG_LONG_OPTS
 	help
-	  Run program with some namespaces unshared from parent.
+	Run program with some namespaces unshared from parent.
 config BUSYBOX_CONFIG_WALL
 	bool "wall"
 	default BUSYBOX_DEFAULT_WALL
 	depends on BUSYBOX_CONFIG_FEATURE_UTMP
 	help
-	  Write a message to all users that are logged in.
+	Write a message to all users that are logged in.
 
 comment "Common options for mount/umount"
 	depends on BUSYBOX_CONFIG_MOUNT || BUSYBOX_CONFIG_UMOUNT
@@ -885,29 +885,29 @@ config BUSYBOX_CONFIG_FEATURE_MOUNT_LOOP
 	default BUSYBOX_DEFAULT_FEATURE_MOUNT_LOOP
 	depends on BUSYBOX_CONFIG_MOUNT || BUSYBOX_CONFIG_UMOUNT
 	help
-	  Enabling this feature allows automatic mounting of files (containing
-	  filesystem images) via the linux kernel's loopback devices.
-	  The mount command will detect you are trying to mount a file instead
-	  of a block device, and transparently associate the file with a
-	  loopback device. The umount command will also free that loopback
-	  device.
+	Enabling this feature allows automatic mounting of files (containing
+	filesystem images) via the linux kernel's loopback devices.
+	The mount command will detect you are trying to mount a file instead
+	of a block device, and transparently associate the file with a
+	loopback device. The umount command will also free that loopback
+	device.
 
-	  You can still use the 'losetup' utility (to manually associate files
-	  with loop devices) if you need to do something advanced, such as
-	  specify an offset or cryptographic options to the loopback device.
-	  (If you don't want umount to free the loop device, use "umount -D".)
+	You can still use the 'losetup' utility (to manually associate files
+	with loop devices) if you need to do something advanced, such as
+	specify an offset or cryptographic options to the loopback device.
+	(If you don't want umount to free the loop device, use "umount -D".)
 
 config BUSYBOX_CONFIG_FEATURE_MOUNT_LOOP_CREATE
 	bool "Create new loopback devices if needed"
 	default BUSYBOX_DEFAULT_FEATURE_MOUNT_LOOP_CREATE
 	depends on BUSYBOX_CONFIG_FEATURE_MOUNT_LOOP
 	help
-	  Linux kernels >= 2.6.24 support unlimited loopback devices. They are
-	  allocated for use when trying to use a loop device. The loop device
-	  must however exist.
+	Linux kernels >= 2.6.24 support unlimited loopback devices. They are
+	allocated for use when trying to use a loop device. The loop device
+	must however exist.
 
-	  This feature lets mount to try to create next /dev/loopN device
-	  if it does not find a free one.
+	This feature lets mount to try to create next /dev/loopN device
+	if it does not find a free one.
 
 config BUSYBOX_CONFIG_FEATURE_MTAB_SUPPORT
 	bool "Support old /etc/mtab file"
@@ -915,23 +915,23 @@ config BUSYBOX_CONFIG_FEATURE_MTAB_SUPPORT
 	depends on BUSYBOX_CONFIG_MOUNT || BUSYBOX_CONFIG_UMOUNT
 	select BUSYBOX_CONFIG_FEATURE_MOUNT_FAKE
 	help
-	  Historically, Unix systems kept track of the currently mounted
-	  partitions in the file "/etc/mtab". These days, the kernel exports
-	  the list of currently mounted partitions in "/proc/mounts", rendering
-	  the old mtab file obsolete. (In modern systems, /etc/mtab should be
-	  a symlink to /proc/mounts.)
-
-	  The only reason to have mount maintain an /etc/mtab file itself is if
-	  your stripped-down embedded system does not have a /proc directory.
-	  If you must use this, keep in mind it's inherently brittle (for
-	  example a mount under chroot won't update it), can't handle modern
-	  features like separate per-process filesystem namespaces, requires
-	  that your /etc directory be writable, tends to get easily confused
-	  by --bind or --move mounts, won't update if you rename a directory
-	  that contains a mount point, and so on. (In brief: avoid.)
-
-	  About the only reason to use this is if you've removed /proc from
-	  your kernel.
+	Historically, Unix systems kept track of the currently mounted
+	partitions in the file "/etc/mtab". These days, the kernel exports
+	the list of currently mounted partitions in "/proc/mounts", rendering
+	the old mtab file obsolete. (In modern systems, /etc/mtab should be
+	a symlink to /proc/mounts.)
+
+	The only reason to have mount maintain an /etc/mtab file itself is if
+	your stripped-down embedded system does not have a /proc directory.
+	If you must use this, keep in mind it's inherently brittle (for
+	example a mount under chroot won't update it), can't handle modern
+	features like separate per-process filesystem namespaces, requires
+	that your /etc directory be writable, tends to get easily confused
+	by --bind or --move mounts, won't update if you rename a directory
+	that contains a mount point, and so on. (In brief: avoid.)
+
+	About the only reason to use this is if you've removed /proc from
+	your kernel.
 
 source volume_id/Config.in