diff options
author | Django Armstrong <iamdjango@hotmail.com> | 2019-01-20 16:46:42 +0000 |
---|---|---|
committer | Mathias Kresin <dev@kresin.me> | 2019-01-26 21:46:33 +0100 |
commit | 1c2f7b511514d43d8a826b26e09817b2750a2bf4 (patch) | |
tree | 1d704f9637e879606be61a01a7a3b494e5668ff8 /package/system | |
parent | 2a4e756085ad88969dbab32961119fe65e3b46b3 (diff) | |
download | upstream-1c2f7b511514d43d8a826b26e09817b2750a2bf4.tar.gz upstream-1c2f7b511514d43d8a826b26e09817b2750a2bf4.tar.bz2 upstream-1c2f7b511514d43d8a826b26e09817b2750a2bf4.zip |
ath79: add support for Devolo WiFi Pro 1750e
Hardware
--------
CPU: Qualcomm Atheros QCA9558
RAM: 128M DDR2
FLASH: 16MiB
ETH: 1x Atheros AR8035 (PoE in)
1x Atheros AR8033
WiFi2: QCA9558 3T3R (SiGE SE2565T 2.4 GHz power amp x3)
WiFi5: QCA9880 3T3R (Skyworks 5003L1 5 GHz power amp x3)
BTN: 1x Reset
1x WPS
1x USB eject
LED: 1x LED blue
1x LED red
BEEP: 1x GPIO attached piezo beeper
UART: 3.3V GND TX RX (115200-N-8) (3.3V is pin closest to rear ports)
Dupont 4 pin header
Rear RJ45 serial port non-functional
USB: 1x v2.0
Installation
------------
Make sure you set a password for the root user as prompted on first
setup!
1. Upload OpenWRT sysupgrade image via SSH to the device.
Use /tmp as the destination folder on the device.
User is root, password previously set in the web interface.
2. Install OpenWRT with
> sysupgrade -n -F /tmp/<openwrt-image-name>
Signed-off-by: Django Armstrong <iamdjango@hotmail.com>
Diffstat (limited to 'package/system')
0 files changed, 0 insertions, 0 deletions