diff options
author | David Bauer <mail@david-bauer.net> | 2020-04-14 03:58:37 +0200 |
---|---|---|
committer | David Bauer <mail@david-bauer.net> | 2020-04-19 16:45:40 +0200 |
commit | 8d9c1087e4d07d625a9fef61d5dce71d850732ae (patch) | |
tree | 78f125291c0085a570dd288decce08bd2927a7f7 /package/system/uci/files | |
parent | 45e2b7763f2a846bf1a40f5fa79b4cfe4678557a (diff) | |
download | upstream-8d9c1087e4d07d625a9fef61d5dce71d850732ae.tar.gz upstream-8d9c1087e4d07d625a9fef61d5dce71d850732ae.tar.bz2 upstream-8d9c1087e4d07d625a9fef61d5dce71d850732ae.zip |
ath79: add support for AVM FRITZ!WLAN Repeater 450E
SOC: Qualcomm QCA9556 (Scorpion) 560MHz MIPS74Kc
RAM: 64MB Zentel A3R12E40CBF DDR2
FLASH: 16MiB Winbond W25Q128 SPI NOR
WLAN1: QCA9556 2.4 GHz 802.11b/g/n 3x3
INPUT: WPS button
LED: Power, WiFi, LAN, RSSI indicator
Serial: Header Next to Black metal shield
Pinout is 3.3V - RX - TX - GND (Square Pad is 3.3V)
The Serial setting is 115200-8-N-1.
Installation via EVA:
In the first seconds after Power is connected, the bootloader will
listen for FTP connections on 192.168.178.1. Firmware can be uploaded
like following:
ftp> quote USER adam2
ftp> quote PASS adam2
ftp> binary
ftp> debug
ftp> passive
ftp> quote MEDIA FLSH
ftp> put openwrt-sysupgrade.bin mtd1
Note that this procedure might take up to two minutes.
You need to powercycle the device afterwards to boot OpenWRT.
Tested-by: Andreas Ziegler <dev@andreas-ziegler.de>
Signed-off-by: David Bauer <mail@david-bauer.net>
Diffstat (limited to 'package/system/uci/files')
0 files changed, 0 insertions, 0 deletions