diff options
| author | Alexander Couzens <lynxis@fe80.eu> | 2021-06-01 21:09:26 +0000 |
|---|---|---|
| committer | Alexander Couzens <lynxis@fe80.eu> | 2021-07-05 17:27:13 +0200 |
| commit | 8d497b65704f62294a4bbc0e1f5aa4eb1dbf9e24 (patch) | |
| tree | c446dca5ab183ee082a3bd9e52d027baf34c745c /package/network | |
| parent | bb2a9af6f1f3a03617002d0b9ba361f97d68dc02 (diff) | |
| download | upstream-8d497b65704f62294a4bbc0e1f5aa4eb1dbf9e24.tar.gz upstream-8d497b65704f62294a4bbc0e1f5aa4eb1dbf9e24.tar.bz2 upstream-8d497b65704f62294a4bbc0e1f5aa4eb1dbf9e24.zip | |
ramips: add support for minew g1-c
The minew g1-c is a smart home gateway / BLE gateway.
A Nordic nRF52832 is available via USB UART (cp210x) to support BLE.
The LED ring is a ring of 24x ws2812b connect to a generic GPIO (unsupported).
There is a small LED which is only visible when the device is open which
will be used as LED until the ws2812b is supported.
The board has also a micro sdcard/tfcard slot (untested).
The Nordic nRF52832 exposes SWD over a 5pin header (GND, VCC, SWD, SWC, RST).
The vendor uses an older OpenWrt version, sysupgrade can be used via
serial or ssh.
CPU: MT7628AN / 580MHz
RAM: DDR2 128 MiB RAM
Flash: SPI NOR 16 MiB W25Q128
Ethernet: 1x 100 mbit (Port 0) (PoE in)
USB: USB hub, 2x external, 1x internal to USB UART
Power: via micro usb or PoE 802.11af
UART: 3.3V, 115200 8n1
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
Diffstat (limited to 'package/network')
0 files changed, 0 insertions, 0 deletions