diff options
| author | Christian Mehlis <christian@m3hlis.de> | 2017-02-26 12:25:57 +0100 |
|---|---|---|
| committer | John Crispin <john@phrozen.org> | 2017-03-30 09:57:22 +0200 |
| commit | dc4eae7a8cf676911b0048b1e73c6f9adeea2f06 (patch) | |
| tree | aabdb124ca654ccb242f3588231bfbdf1ca6c402 /package/network/services/odhcpd/Makefile | |
| parent | 967b6be118e3217e8d6a28df9c615d3255e7b1ae (diff) | |
| download | upstream-dc4eae7a8cf676911b0048b1e73c6f9adeea2f06.tar.gz upstream-dc4eae7a8cf676911b0048b1e73c6f9adeea2f06.tar.bz2 upstream-dc4eae7a8cf676911b0048b1e73c6f9adeea2f06.zip | |
ar71xx: Compex WPJ563 support
Specification:
- SoC: Qualcomm Atheros QCA9563 (775 MHz, MIPS 74Kc)
- RAM: 128 MiB
- Storage: 16MB NOR flash
- Wireless: Built into QCA9563 (Dragonfly), PHY modes b/g/n, 3x3 MIMO
- Ethernet: 2x1G
Tested and working:
- ethernet / switch / lan / wan
- 2.4GHz SoC wifi
- PCIe
- leds
- buzzer
Ramload:
- tftpboot 0x84000000 lede-ar71xx-generic-wpj563-16M-initramfs-uImage.bin
- bootm 0x84000000
Install:
- tftpboot 0x80500000 lede-ar71xx-generic-wpj563-16M-squashfs-sysupgrade.bin
- erase 0x9f030000 +$filesize
- erase 0x9f680000 +1
- cp.b $fileaddr 0x9f030000 $filesize
Erasing 0x9f680000 is required because uboot defines
"bootcmd=bootm 0x9f680000 || bootm 0x9f030000", so it first tries to boot
the higher address. I think the 16 mb flash are intended to be used as
8+8mb for a fallback image. In my hardware only the lower address has a
bootable image. But to make sure future hardware will boot lede too, I
erase one block, so uboot will skip this address.
Signed-off-by: Christian Mehlis <christian@m3hlis.de>
Diffstat (limited to 'package/network/services/odhcpd/Makefile')
0 files changed, 0 insertions, 0 deletions