(6/6) bcm57xx: package

This is the bcm57xx package.  I have tested default vlan functions,
but I dont have the equipment to test more advanced setups.  The default
vlan setup seems to be working fine.  I also added the activate_gpio
parameter which will make the driver activate the switch via gpio before
probing for it.

I'm not sure which method is best for autoload.  For the wrt350n, I
need the activate_gpio parameter.  But its probably not a good idea
to add that to the autoload file.  On a system without a bcm57xx switch,
isn't it a bad idea to mess with the gpios looking for the switch? Ideally,
wouldn't it be best to load the bcm57xx module from broadcom-diag, after
it has determined which router its on?  I tried using 'request_module' from
there, but had no success.  For now, I am relying on preinit to load
the bcm57xx module with activate_gpio param, after it has failed to load
switch_robo and switch_adm.

Signed-off-by: Ben Pfountz <netprince (at) vt (dot) edu>

SVN-Revision: 11471

1 files changed, 36 insertions, 0 deletions

diff --git a/package/broadcom-57xx/src/proto/bcmdhcp.h b/package/broadcom-57xx/src/proto/bcmdhcp.h
new file mode 100644
index 0000000000..f92a69b362
--- /dev/null
+++ b/package/broadcom-57xx/src/proto/bcmdhcp.h
@@ -0,0 +1,36 @@
+/*
+ * Copyright 2007, Broadcom Corporation
+ * All Rights Reserved.                
+ *                                     
+ * This is UNPUBLISHED PROPRIETARY SOURCE CODE of Broadcom Corporation;   
+ * the contents of this file may not be disclosed to third parties, copied
+ * or duplicated in any form, in whole or in part, without the prior      
+ * written permission of Broadcom Corporation.                            
+ *
+ * Fundamental constants relating to DHCP Protocol
+ *
+ * $Id: bcmdhcp.h,v 1.1.1.1 2007/05/31 08:00:41 michael Exp $
+ */
+
+#ifndef _bcmdhcp_h_
+#define _bcmdhcp_h_
+
+/* DHCP params */
+#define DHCP_TYPE_OFFSET	0	/* DHCP type (request|reply) offset */
+#define DHCP_FLAGS_OFFSET	10	/* DHCP flags offset */
+#define DHCP_CIADDR_OFFSET	12	/* DHCP client IP address offset */
+#define DHCP_YIADDR_OFFSET	16	/* DHCP your IP address offset */
+#define DHCP_GIADDR_OFFSET	24	/* DHCP relay agent IP address offset */
+#define DHCP_CHADDR_OFFSET	28	/* DHCP client h/w address offset */
+
+#define DHCP_TYPE_REQUEST	1	/* DHCP request (discover|request) */
+#define DHCP_TYPE_REPLY		2	/* DHCP reply (offset|ack) */
+
+#define DHCP_PORT_SERVER	67	/* DHCP server UDP port */
+#define DHCP_PORT_CLIENT	68	/* DHCP client UDP port */
+
+#define DHCP_FLAG_BCAST	0x8000	/* DHCP broadcast flag */
+
+#define DHCP_FLAGS_LEN	2	/* DHCP flags field length */
+
+#endif	/* #ifndef _bcmdhcp_h_ */