aboutsummaryrefslogtreecommitdiffstats
path: root/package/boot/uboot-kirkwood/patches
diff options
context:
space:
mode:
authorPawel Dembicki <paweldembicki@gmail.com>2020-01-24 07:13:24 +0100
committerPetr Štetiar <ynezz@true.cz>2020-07-11 13:33:28 +0200
commitc881d7ab039022aac91a3524227df9cc5f60dd16 (patch)
treec038b52a1dc8bb58e70105d05a035372bbd15ff1 /package/boot/uboot-kirkwood/patches
parent9c99187e616ac54aed572a0eb310aadd06ac8e4b (diff)
downloadupstream-c881d7ab039022aac91a3524227df9cc5f60dd16.tar.gz
upstream-c881d7ab039022aac91a3524227df9cc5f60dd16.tar.bz2
upstream-c881d7ab039022aac91a3524227df9cc5f60dd16.zip
uboot-kirkwood: add uboot for CheckPoint L-50
This patch add u-boot for CheckPoint L-50 routers. Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
Diffstat (limited to 'package/boot/uboot-kirkwood/patches')
-rw-r--r--package/boot/uboot-kirkwood/patches/151-arm-kirkwood-add-CheckPoint-L-50-device.patch928
-rw-r--r--package/boot/uboot-kirkwood/patches/200-openwrt-config.patch26
-rw-r--r--package/boot/uboot-kirkwood/patches/701-phy-mv88e61xx-add-support-for-RGMII-TX-RX-delay.patch53
-rw-r--r--package/boot/uboot-kirkwood/patches/702-phy-mv88e61xx-add-support-for-MV88E6171.patch67
4 files changed, 1072 insertions, 2 deletions
diff --git a/package/boot/uboot-kirkwood/patches/151-arm-kirkwood-add-CheckPoint-L-50-device.patch b/package/boot/uboot-kirkwood/patches/151-arm-kirkwood-add-CheckPoint-L-50-device.patch
new file mode 100644
index 0000000000..b228be6aa6
--- /dev/null
+++ b/package/boot/uboot-kirkwood/patches/151-arm-kirkwood-add-CheckPoint-L-50-device.patch
@@ -0,0 +1,928 @@
+From 742f780f62ace452b83e2463f1f1afdda4b724ea Mon Sep 17 00:00:00 2001
+From: Pawel Dembicki <paweldembicki@gmail.com>
+Date: Sun, 26 Jan 2020 07:27:24 +0100
+Subject: [PATCH] arm: kirkwood: add CheckPoint L-50 device
+
+This patch adds support for the Check Point L-50 from 600/1100 series
+routers.
+
+Specification:
+-CPU: Marvell Kirkwood 88F6821 1200MHz
+-RAM: 512MB
+-Flash: NAND 512MB
+-WiFi: mPCIe card based on Atheros AR9287 b/g/n
+-WAN: 1 Gigabit Port (Marvell 88E1116R PHY)
+-LAN: 9 Gigabit Ports (2x Marvell 88E6171(5+4))
+-USB: 2x USB2.0
+-Express card slot
+-SD card slot
+-Serial console: RJ-45 115200 8n1
+-Unsupported DSL
+
+Known limitations:
+- In board is used two switches in chain. Second Marvell is not used
+ in u-Boot.
+
+Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
+---
+ arch/arm/dts/Makefile | 1 +
+ arch/arm/dts/kirkwood-l-50.dts | 439 +++++++++++++++++++++++++++++
+ arch/arm/mach-kirkwood/Kconfig | 4 +
+ board/checkpoint/l-50/Kconfig | 12 +
+ board/checkpoint/l-50/MAINTAINERS | 6 +
+ board/checkpoint/l-50/Makefile | 11 +
+ board/checkpoint/l-50/kwbimage.cfg | 36 +++
+ board/checkpoint/l-50/l-50.c | 172 +++++++++++
+ board/checkpoint/l-50/l-50.h | 29 ++
+ configs/l-50_defconfig | 59 ++++
+ include/configs/l-50.h | 59 ++++
+ 11 files changed, 828 insertions(+)
+ create mode 100644 arch/arm/dts/kirkwood-l-50.dts
+ create mode 100644 board/checkpoint/l-50/Kconfig
+ create mode 100644 board/checkpoint/l-50/MAINTAINERS
+ create mode 100644 board/checkpoint/l-50/Makefile
+ create mode 100644 board/checkpoint/l-50/kwbimage.cfg
+ create mode 100644 board/checkpoint/l-50/l-50.c
+ create mode 100644 board/checkpoint/l-50/l-50.h
+ create mode 100644 configs/l-50_defconfig
+ create mode 100644 include/configs/l-50.h
+
+--- a/arch/arm/dts/Makefile
++++ b/arch/arm/dts/Makefile
+@@ -51,6 +51,7 @@ dtb-$(CONFIG_KIRKWOOD) += \
+ kirkwood-iconnect.dtb \
+ kirkwood-is2.dtb \
+ kirkwood-km_kirkwood.dtb \
++ kirkwood-l-50.dtb \
+ kirkwood-lsxhl.dtb \
+ kirkwood-lschlv2.dtb \
+ kirkwood-net2big.dtb \
+--- /dev/null
++++ b/arch/arm/dts/kirkwood-l-50.dts
+@@ -0,0 +1,439 @@
++// SPDX-License-Identifier: GPL-2.0
++/*
++ * Check Point L-50 Board Description
++ * Copyright 2020 Pawel Dembicki <paweldembicki@gmail.com>
++ */
++
++/dts-v1/;
++
++#include "kirkwood.dtsi"
++#include "kirkwood-6281.dtsi"
++
++/ {
++ model = "Check Point L-50";
++ compatible = "checkpoint,l-50", "marvell,kirkwood-88f6281", "marvell,kirkwood";
++
++ memory {
++ device_type = "memory";
++ reg = <0x00000000 0x20000000>;
++ };
++
++ chosen {
++ bootargs = "console=ttyS0,115200n8";
++ stdout-path = &uart0;
++ };
++
++ ocp@f1000000 {
++ pinctrl: pin-controller@10000 {
++ pinctrl-0 = <&pmx_led38 &pmx_sysrst &pmx_button29>;
++ pinctrl-names = "default";
++
++ pmx_sysrst: pmx-sysrst {
++ marvell,pins = "mpp6";
++ marvell,function = "sysrst";
++ };
++
++ pmx_button29: pmx_button29 {
++ marvell,pins = "mpp29";
++ marvell,function = "gpio";
++ };
++
++ pmx_led38: pmx_led38 {
++ marvell,pins = "mpp38";
++ marvell,function = "gpio";
++ };
++
++ pmx_sdio_cd: pmx-sdio-cd {
++ marvell,pins = "mpp46";
++ marvell,function = "gpio";
++ };
++ };
++
++ serial@12000 {
++ status = "okay";
++ };
++
++ mvsdio@90000 {
++ status = "okay";
++ cd-gpios = <&gpio1 14 9>;
++ };
++
++ i2c@11000 {
++ status = "okay";
++ clock-frequency = <400000>;
++
++ gpio2: gpio-expander@20{
++ #gpio-cells = <2>;
++ #interrupt-cells = <2>;
++ compatible = "semtech,sx1505q";
++ reg = <0x20>;
++
++ gpio-controller;
++ };
++
++ /* Three GPIOs from 0x21 exp. are undescribed in dts:
++ * 1: DSL module reset (active low)
++ * 5: mPCIE reset (active low)
++ * 6: Express card reset (active low)
++ */
++ gpio3: gpio-expander@21{
++ #gpio-cells = <2>;
++ #interrupt-cells = <2>;
++ compatible = "semtech,sx1505q";
++ reg = <0x21>;
++
++ gpio-controller;
++ };
++
++ rtc@30 {
++ compatible = "s35390a";
++ reg = <0x30>;
++ };
++ };
++ };
++
++ leds {
++ compatible = "gpio-leds";
++
++ status_green {
++ label = "l-50:green:status";
++ gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
++ };
++
++ status_red {
++ label = "l-50:red:status";
++ gpios = <&gpio3 2 GPIO_ACTIVE_LOW>;
++ };
++
++ wifi {
++ label = "l-50:green:wifi";
++ gpios = <&gpio2 7 GPIO_ACTIVE_LOW>;
++ linux,default-trigger = "phy0tpt";
++ };
++
++ internet_green {
++ label = "l-50:green:internet";
++ gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
++ };
++
++ internet_red {
++ label = "l-50:red:internet";
++ gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
++ };
++
++ usb1_green {
++ label = "l-50:green:usb1";
++ gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
++ linux,default-trigger = "usbport";
++ trigger-sources = <&hub_port3>;
++ };
++
++ usb1_red {
++ label = "l-50:red:usb1";
++ gpios = <&gpio2 4 GPIO_ACTIVE_LOW>;
++ };
++
++ usb2_green {
++ label = "l-50:green:usb2";
++ gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
++ linux,default-trigger = "usbport";
++ trigger-sources = <&hub_port1>;
++ };
++
++ usb2_red {
++ label = "l-50:red:usb2";
++ gpios = <&gpio2 5 GPIO_ACTIVE_LOW>;
++ };
++ };
++
++ usb2_pwr {
++ compatible = "regulator-fixed";
++ regulator-name = "usb2_pwr";
++
++ regulator-min-microvolt = <5000000>;
++ regulator-max-microvolt = <5000000>;
++ gpio = <&gpio3 3 GPIO_ACTIVE_LOW>;
++ regulator-always-on;
++ };
++
++ usb1_pwr {
++ compatible = "regulator-fixed";
++ regulator-name = "usb1_pwr";
++
++ regulator-min-microvolt = <5000000>;
++ regulator-max-microvolt = <5000000>;
++ gpio = <&gpio3 4 GPIO_ACTIVE_LOW>;
++ regulator-always-on;
++ };
++
++ mpcie_pwr {
++ compatible = "regulator-fixed";
++ regulator-name = "mpcie_pwr";
++
++ regulator-min-microvolt = <3300000>;
++ regulator-max-microvolt = <3300000>;
++ gpio = <&gpio3 5 GPIO_ACTIVE_HIGH>;
++ enable-active-high;
++ regulator-always-on;
++ };
++
++ express_card_pwr {
++ compatible = "regulator-fixed";
++ regulator-name = "express_card_pwr";
++
++ regulator-min-microvolt = <3300000>;
++ regulator-max-microvolt = <3300000>;
++ gpio = <&gpio3 7 GPIO_ACTIVE_HIGH>;
++ enable-active-high;
++ regulator-always-on;
++ };
++
++ keys {
++ compatible = "gpio-keys";
++
++ factory_defaults {
++ label = "factory_defaults";
++ gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
++ linux,code = <KEY_RESTART>;
++ };
++ };
++};
++
++&mdio {
++ status = "okay";
++
++ ethphy8: ethernet-phy@8 {
++ reg = <0x08>;
++ };
++
++ switch0: switch@10 {
++ compatible = "marvell,mv88e6085";
++ #address-cells = <1>;
++ #size-cells = <0>;
++ reg = <0x10>;
++ dsa,member = <0 0>;
++
++ ports {
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ port@0 {
++ reg = <0>;
++ label = "lan5";
++ };
++
++ port@1 {
++ reg = <1>;
++ label = "lan1";
++ };
++
++ port@2 {
++ reg = <2>;
++ label = "lan6";
++ };
++
++ port@3 {
++ reg = <3>;
++ label = "lan2";
++ };
++
++ port@4 {
++ reg = <4>;
++ label = "lan7";
++ };
++
++ switch0port5: port@5 {
++ reg = <5>;
++ phy-mode = "rgmii-txid";
++ link = <&switch1port5>;
++ fixed-link {
++ speed = <1000>;
++ full-duplex;
++ };
++ };
++
++ port@6 {
++ reg = <6>;
++ label = "cpu";
++ phy-mode = "rgmii-id";
++ ethernet = <&eth1port>;
++ fixed-link {
++ speed = <1000>;
++ full-duplex;
++ };
++ };
++ };
++ };
++
++ switch@11 {
++ compatible = "marvell,mv88e6085";
++ #address-cells = <1>;
++ #size-cells = <0>;
++ reg = <0x11>;
++ dsa,member = <0 1>;
++
++ ports {
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ port@0 {
++ reg = <0>;
++ label = "lan3";
++ };
++
++ port@1 {
++ reg = <1>;
++ label = "lan8";
++ };
++
++ port@2 {
++ reg = <2>;
++ label = "lan4";
++ };
++
++ port@3 {
++ reg = <3>;
++ label = "dmz";
++ };
++
++ switch1port5: port@5 {
++ reg = <5>;
++ phy-mode = "rgmii-txid";
++ link = <&switch0port5>;
++ fixed-link {
++ speed = <1000>;
++ full-duplex;
++ };
++ };
++
++ port@6 {
++ reg = <6>;
++ label = "dsl";
++ fixed-link {
++ speed = <100>;
++ full-duplex;
++ };
++ };
++ };
++ };
++};
++
++&eth0 {
++ status = "okay";
++ ethernet0-port@0 {
++ phy-handle = <&ethphy8>;
++ };
++};
++
++&eth1 {
++ status = "okay";
++ ethernet1-port@0 {
++ speed = <1000>;
++ duplex = <1>;
++ phy-handle = <&switch0>;
++ };
++};
++
++&nand {
++ status = "okay";
++ pinctrl-0 = <&pmx_nand>;
++ pinctrl-names = "default";
++
++ partition@0 {
++ label = "u-boot";
++ reg = <0x00000000 0x000c0000>;
++ };
++
++ partition@a0000 {
++ label = "bootldr-env";
++ reg = <0x000c0000 0x00040000>;
++ };
++
++ partition@100000 {
++ label = "kernel-1";
++ reg = <0x00100000 0x00800000>;
++ };
++
++ partition@900000 {
++ label = "rootfs-1";
++ reg = <0x00900000 0x07100000>;
++ };
++
++ partition@7a00000 {
++ label = "kernel-2";
++ reg = <0x07a00000 0x00800000>;
++ };
++
++ partition@8200000 {
++ label = "rootfs-2";
++ reg = <0x08200000 0x07100000>;
++ };
++
++ partition@f300000 {
++ label = "default_sw";
++ reg = <0x0f300000 0x07900000>;
++ };
++
++ partition@16c00000 {
++ label = "logs";
++ reg = <0x16c00000 0x01800000>;
++ };
++
++ partition@18400000 {
++ label = "preset_cfg";
++ reg = <0x18400000 0x00100000>;
++ };
++
++ partition@18500000 {
++ label = "adsl";
++ reg = <0x18500000 0x00100000>;
++ };
++
++ partition@18600000 {
++ label = "storage";
++ reg = <0x18600000 0x07a00000>;
++ };
++};
++
++&rtc {
++ status = "disabled";
++};
++
++&pciec {
++ status = "okay";
++};
++
++&pcie0 {
++ status = "okay";
++};
++
++&sata_phy0 {
++ status = "disabled";
++};
++
++&sata_phy1 {
++ status = "disabled";
++};
++
++&usb0 {
++ #address-cells = <1>;
++ #size-cells = <0>;
++ status = "okay";
++
++ port@1 {
++ #address-cells = <1>;
++ #size-cells = <0>;
++ reg = <1>;
++ #trigger-source-cells = <0>;
++
++ hub_port1: port@1 {
++ reg = <1>;
++ #trigger-source-cells = <0>;
++ };
++
++ hub_port3: port@3 {
++ reg = <3>;
++ #trigger-source-cells = <0>;
++ };
++ };
++};
+--- a/arch/arm/mach-kirkwood/Kconfig
++++ b/arch/arm/mach-kirkwood/Kconfig
+@@ -74,6 +74,9 @@ config TARGET_DB_88F6281_BP
+ config TARGET_NSA325
+ bool "Zyxel NSA325 board"
+
++config TARGET_L50
++ bool "Check Point L-50"
++
+ endchoice
+
+ config SYS_SOC
+@@ -102,5 +105,6 @@ source "board/zyxel/nsa325/Kconfig"
+ source "board/alliedtelesis/SBx81LIFKW/Kconfig"
+ source "board/alliedtelesis/SBx81LIFXCAT/Kconfig"
+ source "board/Marvell/db-88f6281-bp/Kconfig"
++source "board/checkpoint/l-50/Kconfig"
+
+ endif
+--- /dev/null
++++ b/board/checkpoint/l-50/Kconfig
+@@ -0,0 +1,12 @@
++if TARGET_L50
++
++config SYS_BOARD
++ default "l-50"
++
++config SYS_VENDOR
++ default "checkpoint"
++
++config SYS_CONFIG_NAME
++ default "l-50"
++
++endif
+--- /dev/null
++++ b/board/checkpoint/l-50/MAINTAINERS
+@@ -0,0 +1,6 @@
++L50 BOARD
++M: Pawel Dembicki <paweldembicki@gmail.com>
++S: Maintained
++F: board/checkpoint/l-50/
++F: include/configs/l-50.h
++F: configs/l-50_defconfig
+--- /dev/null
++++ b/board/checkpoint/l-50/Makefile
+@@ -0,0 +1,11 @@
++# SPDX-License-Identifier: GPL-2.0+
++#
++# (C) Copyright 2020
++# Pawel Dembicki <paweldembicki@gmail.com>
++#
++# Based on Kirkwood support:
++# (C) Copyright 2009
++# Marvell Semiconductor <www.marvell.com>
++# Written-by: Prafulla Wadaskar <prafulla@marvell.com>
++
++obj-y := l-50.o
+--- /dev/null
++++ b/board/checkpoint/l-50/kwbimage.cfg
+@@ -0,0 +1,36 @@
++# SPDX-License-Identifier: GPL-2.0+
++#
++# Values taken from original bootloader source.
++# Based on:
++# dramregs_seattle_400rd_A.txt from uboot_src_CP600_1100.
++
++# Boot Media configurations
++BOOT_FROM nand
++NAND_ECC_MODE default
++NAND_PAGE_SIZE 0x0800
++
++DATA 0xFFD100e0 0x1b1b1b9b
++DATA 0xFFD01400 0x43000c30
++DATA 0xFFD01404 0x39543000
++DATA 0xFFD01408 0x22125451
++DATA 0xFFD0140C 0x00000833
++DATA 0xFFD01410 0x000000cc
++DATA 0xFFD01414 0x00000000
++DATA 0xFFD01418 0x00000000
++DATA 0xFFD0141C 0x00000C52
++DATA 0xFFD01420 0x00000004
++DATA 0xFFD01424 0x0000F17F
++DATA 0xFFD01428 0x00085520
++DATA 0xFFD0147C 0x00008552
++DATA 0xFFD01504 0x0FFFFFF1
++DATA 0xFFD01508 0x10000000
++DATA 0xFFD0150C 0x0FFFFFF5
++DATA 0xFFD01514 0x00000000
++DATA 0xFFD0151C 0x00000000
++DATA 0xFFD01494 0x00120012
++DATA 0xFFD01498 0x00000000
++DATA 0xFFD0149C 0x0000E40F
++DATA 0xFFD01480 0x00000001
++DATA 0xFFD20134 0x66666666
++DATA 0xFFD20138 0x66666666
++DATA 0x0 0x0
+--- /dev/null
++++ b/board/checkpoint/l-50/l-50.c
+@@ -0,0 +1,172 @@
++// SPDX-License-Identifier: GPL-2.0+
++/*
++ * Copyright (C) 2020
++ * Pawel Dembicki <paweldembicki@gmail.com>
++ *
++ * Based on Kirkwood support:
++ * (C) Copyright 2009
++ * Marvell Semiconductor <www.marvell.com>
++ * Written-by: Prafulla Wadaskar <prafulla@marvell.com>
++ */
++
++#include <common.h>
++#include <dm.h>
++#include <i2c.h>
++#include <miiphy.h>
++#include <netdev.h>
++#include <asm/arch/cpu.h>
++#include <asm/arch/soc.h>
++#include <asm/arch/mpp.h>
++#include <asm/arch/gpio.h>
++#include "l-50.h"
++
++DECLARE_GLOBAL_DATA_PTR;
++
++int board_early_init_f(void)
++{
++ /* Gpio configuration */
++ mvebu_config_gpio(L50_OE_VAL_LOW, L50_OE_VAL_HIGH,
++ L50_OE_LOW, L50_OE_HIGH);
++
++ /* Multi-Purpose Pins Functionality configuration */
++ static const u32 kwmpp_config[] = {
++ MPP0_NF_IO2,
++ MPP1_NF_IO3,
++ MPP2_NF_IO4,
++ MPP3_NF_IO5,
++ MPP4_NF_IO6,
++ MPP5_NF_IO7,
++ MPP6_SYSRST_OUTn,
++ MPP7_SPI_SCn,
++ MPP8_TW_SDA,
++ MPP9_TW_SCK,
++ MPP10_UART0_TXD,
++ MPP11_UART0_RXD,
++ MPP12_SD_CLK,
++ MPP13_SD_CMD,
++ MPP14_SD_D0,
++ MPP15_SD_D1,
++ MPP16_SD_D2,
++ MPP17_SD_D3,
++ MPP18_NF_IO0,
++ MPP19_NF_IO1,
++ MPP20_GE1_0,
++ MPP21_GE1_1,
++ MPP22_GE1_2,
++ MPP23_GE1_3,
++ MPP24_GE1_4,
++ MPP25_GE1_5,
++ MPP26_GE1_6,
++ MPP27_GE1_7,
++ MPP28_GPIO,
++ MPP29_GPIO,
++ MPP30_GE1_10,
++ MPP31_GE1_11,
++ MPP32_GE1_12,
++ MPP33_GE1_13,
++ MPP34_GPIO,
++ MPP35_GPIO,
++ MPP36_AUDIO_SPDIFI, /* value from stock u-boot */
++ MPP37_GPIO,
++ MPP38_GPIO,
++ MPP39_TDM_SPI_CS0,
++ MPP40_GPIO,
++ MPP41_GPIO,
++ MPP42_TDM_SPI_MOSI,
++ MPP43_TDM_CODEC_INTn,
++ MPP44_GPIO,
++ MPP45_TDM_PCLK,
++ MPP46_GPIO,
++ MPP47_TDM_DRX,
++ MPP48_GPIO,
++ MPP49_GPIO,
++ 0
++ };
++ kirkwood_mpp_conf(kwmpp_config, NULL);
++
++ return 0;
++}
++
++void board_gpio_expander_init(void)
++{
++ struct udevice *dev0, *dev1;
++ uchar data_buffer;
++ int ret;
++
++ ret = i2c_get_chip_for_busnum(0, L50_GPIO0_I2C_ADDRESS, 1, &dev0);
++ if (ret) {
++ debug("%s: Cannot find I2C GPIO expander chip 0x02%X\n",
++ __func__, L50_GPIO0_I2C_ADDRESS);
++ return;
++ }
++
++ ret = i2c_get_chip_for_busnum(0, L50_GPIO1_I2C_ADDRESS, 1, &dev1);
++ if (ret) {
++ debug("%s: Cannot find I2C GPIO expander chip 0x02%X\n",
++ __func__, L50_GPIO1_I2C_ADDRESS);
++ return;
++ }
++
++ /* Set IO as output */
++ data_buffer = 0x0;
++ dm_i2c_write(dev0, 1, &data_buffer, 1);
++ dm_i2c_write(dev1, 1, &data_buffer, 1);
++
++ /* Set all leds off, reset asserted, pwr off */
++ data_buffer = 0xbf;
++ dm_i2c_write(dev0, 0, &data_buffer, 1);
++ data_buffer = 0x1c;
++ dm_i2c_write(dev1, 0, &data_buffer, 1);
++
++ mdelay(100);
++
++ /* Set pwr on */
++ data_buffer = 0xa5;
++ dm_i2c_write(dev1, 0, &data_buffer, 1);
++
++ mdelay(100);
++
++ /* Set reset deasserted, status red led enabled*/
++ data_buffer = 0xff;
++ dm_i2c_write(dev0, 0, &data_buffer, 1);
++ data_buffer = 0xe3;
++ dm_i2c_write(dev1, 0, &data_buffer, 1);
++}
++
++int board_init(void)
++{
++ /* Boot parameters address */
++ gd->bd->bi_boot_params = mvebu_sdram_bar(0) + 0x100;
++
++ board_gpio_expander_init();
++
++ return 0;
++}
++
++#ifdef CONFIG_RESET_PHY_R
++/* Configure and initialize PHY */
++void reset_phy(void)
++{
++ u16 devadr;
++ char *name = "ethernet-controller@72000";
++
++ if (miiphy_set_current_dev(name))
++ return;
++
++ /* command to read PHY dev address */
++ if (miiphy_read(name, 0xEE, 0xEE, (u16 *)&devadr)) {
++ printf("Err..(%s) could not read PHY dev address\n", __func__);
++ return;
++ }
++
++ /*
++ * Fix PHY led configuration
++ */
++ miiphy_write(name, devadr, MV88E1116_PGADR_REG, 3);
++ miiphy_write(name, devadr, 0x10, 0x1177);
++ miiphy_write(name, devadr, 0x11, 0x4417);
++ miiphy_write(name, devadr, MV88E1116_PGADR_REG, 0);
++
++ debug("88E1116 Initialized on %s\n", name);
++}
++#endif /* CONFIG_RESET_PHY_R */
+--- /dev/null
++++ b/board/checkpoint/l-50/l-50.h
+@@ -0,0 +1,29 @@
++/* SPDX-License-Identifier: GPL-2.0+ */
++/*
++ * Copyright (C) 2020
++ * Pawel Dembicki <paweldembicki@gmail.com>
++ *
++ * Based on Kirkwood support:
++ * (C) Copyright 2009
++ * Marvell Semiconductor <www.marvell.com>
++ * Written-by: Prafulla Wadaskar <prafulla@marvell.com>
++ */
++
++#ifndef __L50_H
++#define __L50_H
++
++/* GPIO configuration */
++#define L50_OE_LOW 0x30000000
++#define L50_OE_HIGH 0x0000004c
++#define L50_OE_VAL_LOW 0x00000000
++#define L50_OE_VAL_HIGH 0x00000000
++
++/* Expander GPIO addresses */
++
++#define L50_GPIO0_I2C_ADDRESS 0x20
++#define L50_GPIO1_I2C_ADDRESS 0x21
++
++/* PHY register */
++#define MV88E1116_PGADR_REG 22
++
++#endif /* __L50_H */
+--- /dev/null
++++ b/configs/l-50_defconfig
+@@ -0,0 +1,59 @@
++CONFIG_ARM=y
++CONFIG_SYS_DCACHE_OFF=y
++CONFIG_ARCH_CPU_INIT=y
++CONFIG_KIRKWOOD=y
++CONFIG_SYS_TEXT_BASE=0x600000
++CONFIG_TARGET_L50=y
++CONFIG_ENV_SIZE=0x20000
++CONFIG_ENV_OFFSET=0xC0000
++CONFIG_ENV_SECT_SIZE=0x20000
++CONFIG_ENV_ADDR=0xC0000
++CONFIG_IDENT_STRING="\nCheck Point L-50"
++CONFIG_NR_DRAM_BANKS=2
++# CONFIG_SYS_MALLOC_F is not set
++CONFIG_BOOTDELAY=1
++CONFIG_CONSOLE_MUX=y
++CONFIG_DISPLAY_BOARDINFO=y
++CONFIG_HUSH_PARSER=y
++# CONFIG_CMD_FLASH is not set
++#CONFIG_CMD_IDE=y
++CONFIG_CMD_I2C=y
++CONFIG_CMD_NAND=y
++CONFIG_CMD_USB=y
++# CONFIG_CMD_SETEXPR is not set
++CONFIG_CMD_DHCP=y
++CONFIG_CMD_MII=y
++CONFIG_CMD_PING=y
++CONFIG_CMD_EXT2=y
++CONFIG_CMD_FAT=y
++CONFIG_CMD_JFFS2=y
++CONFIG_CMD_MTDPARTS=y
++CONFIG_MTD=y
++CONFIG_MTD_RAW_NAND=y
++CONFIG_MTDIDS_DEFAULT="nand0=orion_nand"
++CONFIG_MTDPARTS_DEFAULT="mtdparts=orion_nand:0xc0000@0x0(u-boot)ro,0x40000@0xc0000(bootldr-env),0x7900000@0x100000(ubi),0x800000@0x7a00000(kernel-2),0x7100000@0x8200000(rootfs-2),0x7900000@0xf300000(default_sw),0x1800000@0x16c00000(logs),0x100000@0x18400000(preset_cfg),0x100000@0x18500000(adsl),-@0x18600000(storage)"
++CONFIG_CMD_UBI=y
++CONFIG_ISO_PARTITION=y
++CONFIG_OF_CONTROL=y
++CONFIG_DEFAULT_DEVICE_TREE="kirkwood-l-50"
++CONFIG_ENV_IS_IN_NAND=y
++CONFIG_DM=y
++CONFIG_DM_ETH=y
++#CONFIG_MVSATA_IDE=y
++CONFIG_MMC=y
++CONFIG_MVGBE=y
++CONFIG_MII=y
++CONFIG_PHYLIB=y
++CONFIG_PHY_MARVELL=y
++CONFIG_MV88E61XX_SWITCH=y
++CONFIG_MV88E61XX_CPU_PORT=6
++CONFIG_MV88E61XX_PHY_PORTS=0x01f
++CONFIG_MV88E61XX_FIXED_PORTS=0
++#CONFIG_DM_RTC=y
++#CONFIG_RTC_MV=y
++CONFIG_SYS_NS16550=y
++CONFIG_DM_I2C=y
++CONFIG_SYS_I2C_MVTWSI=y
++CONFIG_USB=y
++CONFIG_USB_EHCI_HCD=y
++CONFIG_USB_STORAGE=y
+--- /dev/null
++++ b/include/configs/l-50.h
+@@ -0,0 +1,59 @@
++/* SPDX-License-Identifier: GPL-2.0+ */
++/*
++ * Copyright (C) 2020
++ * Pawel Dembicki <paweldembicki@gmail.com>
++ *
++ * Based on Kirkwood support:
++ * (C) Copyright 2009
++ * Marvell Semiconductor <www.marvell.com>
++ * Written-by: Prafulla Wadaskar <prafulla@marvell.com>
++ */
++
++#ifndef _CONFIG_L50_H
++#define _CONFIG_L50_H
++
++/*
++ * High Level Configuration Options (easy to change)
++ */
++#define CONFIG_FEROCEON_88FR131 /* CPU Core subversion */
++#define CONFIG_KW88F6281 /* SOC Name */
++#define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */
++
++/*
++ * mv-common.h should be defined after CMD configs since it used them
++ * to enable certain macros
++ */
++#include "mv-common.h"
++
++/* Remove or override few declarations from mv-common.h */
++
++/*
++ * Ethernet Driver configuration
++ */
++#ifdef CONFIG_CMD_NET
++#define CONFIG_MVGBE_PORTS {1, 1} /* enable port 0 only */
++#define CONFIG_NETCONSOLE
++#endif
++
++#define CONFIG_MV88E61XX_CPU_PORT_RX_DELAY
++#define CONFIG_MV88E61XX_CPU_PORT_TX_DELAY
++
++/*
++ * Enable GPI0 support
++ */
++#define CONFIG_KIRKWOOD_GPIO
++
++/*
++ * Default environment variables
++ */
++#define CONFIG_BOOTCOMMAND \
++ "ubi part ubi; " \
++ "ubi read 0x800000 kernel; " \
++ "bootm 0x800000"
++
++#define CONFIG_EXTRA_ENV_SETTINGS \
++ "bootargs=console=ttyS0,115200\0" \
++ "mtdids=" CONFIG_MTDIDS_DEFAULT "\0" \
++ "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \
++ "bootargs_root=\0"
++#endif /* _CONFIG_L50_H */
diff --git a/package/boot/uboot-kirkwood/patches/200-openwrt-config.patch b/package/boot/uboot-kirkwood/patches/200-openwrt-config.patch
index c7c811cee1..83eb0f9d2c 100644
--- a/package/boot/uboot-kirkwood/patches/200-openwrt-config.patch
+++ b/package/boot/uboot-kirkwood/patches/200-openwrt-config.patch
@@ -1,8 +1,8 @@
--- a/arch/arm/mach-kirkwood/Kconfig
+++ b/arch/arm/mach-kirkwood/Kconfig
-@@ -103,4 +103,7 @@ source "board/alliedtelesis/SBx81LIFKW/K
- source "board/alliedtelesis/SBx81LIFXCAT/Kconfig"
+@@ -107,4 +107,7 @@ source "board/alliedtelesis/SBx81LIFXCAT
source "board/Marvell/db-88f6281-bp/Kconfig"
+ source "board/checkpoint/l-50/Kconfig"
+config SECOND_STAGE
+ bool "OpenWrt second stage hack"
@@ -35,6 +35,17 @@
+#include "openwrt-kirkwood-common.h"
+
#endif /* _CONFIG_ICONNECT_H */
+--- a/include/configs/l-50.h
++++ b/include/configs/l-50.h
+@@ -12,6 +12,8 @@
+ #ifndef _CONFIG_L50_H
+ #define _CONFIG_L50_H
+
++#include "openwrt-kirkwood-common.h"
++
+ /*
+ * High Level Configuration Options (easy to change)
+ */
--- /dev/null
+++ b/include/configs/openwrt-kirkwood-common.h
@@ -0,0 +1,31 @@
@@ -139,6 +150,17 @@
+CONFIG_FIT_VERBOSE=y
CONFIG_LZMA=y
+CONFIG_LZO=y
+--- a/configs/l-50_defconfig
++++ b/configs/l-50_defconfig
+@@ -57,3 +57,8 @@ CONFIG_SYS_I2C_MVTWSI=y
+ CONFIG_USB=y
+ CONFIG_USB_EHCI_HCD=y
+ CONFIG_USB_STORAGE=y
++CONFIG_CMD_BOOTZ=y
++CONFIG_FIT=y
++CONFIG_FIT_VERBOSE=y
++CONFIG_LZMA=y
++CONFIG_LZO=y
--- a/configs/nsa310_defconfig
+++ b/configs/nsa310_defconfig
@@ -43,6 +43,9 @@ CONFIG_CMD_UBI=y
diff --git a/package/boot/uboot-kirkwood/patches/701-phy-mv88e61xx-add-support-for-RGMII-TX-RX-delay.patch b/package/boot/uboot-kirkwood/patches/701-phy-mv88e61xx-add-support-for-RGMII-TX-RX-delay.patch
new file mode 100644
index 0000000000..6e358857b7
--- /dev/null
+++ b/package/boot/uboot-kirkwood/patches/701-phy-mv88e61xx-add-support-for-RGMII-TX-RX-delay.patch
@@ -0,0 +1,53 @@
+From 940e9a5828480e4185c9a276ad7f35a4069a2393 Mon Sep 17 00:00:00 2001
+From: Pawel Dembicki <paweldembicki@gmail.com>
+Date: Thu, 23 Jan 2020 22:04:15 +0100
+Subject: [PATCH 1/2] phy: mv88e61xx: add support for RGMII TX/RX delay
+
+Clock delay in RGMII is required for some boards.
+This patch introduce CONFIG_MV88E61XX_CPU_PORT_TX_DELAY and
+CONFIG_MV88E61XX_CPU_PORT_RX_DELAY defines, which are setting
+proper bits in PORT_REG_PHYS_CTRL register.
+
+Cc: Chris Packham <judge.packham@gmail.com>
+Cc: Joe Hershberger <joe.hershberger@ni.com>
+Cc: Anatolij Gustschin <agust@denx.de>
+Cc: Tim Harvey <tharvey@gateworks.com>
+Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
+---
+ drivers/net/phy/mv88e61xx.c | 11 ++++++++++-
+ 1 file changed, 10 insertions(+), 1 deletion(-)
+
+diff --git a/drivers/net/phy/mv88e61xx.c b/drivers/net/phy/mv88e61xx.c
+index 5aff7ed397..889327639d 100644
+--- a/drivers/net/phy/mv88e61xx.c
++++ b/drivers/net/phy/mv88e61xx.c
+@@ -94,6 +94,8 @@
+ #define PORT_REG_STATUS_CMODE_1000BASE_X 0x9
+ #define PORT_REG_STATUS_CMODE_SGMII 0xa
+
++#define PORT_REG_PHYS_CTRL_RGMII_RX_DELAY BIT(15)
++#define PORT_REG_PHYS_CTRL_RGMII_TX_DELAY BIT(14)
+ #define PORT_REG_PHYS_CTRL_PCS_AN_EN BIT(10)
+ #define PORT_REG_PHYS_CTRL_PCS_AN_RST BIT(9)
+ #define PORT_REG_PHYS_CTRL_FC_VALUE BIT(7)
+@@ -747,9 +749,16 @@ static int mv88e61xx_fixed_port_setup(struct phy_device *phydev, u8 port)
+ PORT_REG_PHYS_CTRL_SPD1000;
+ }
+
+- if (port == CONFIG_MV88E61XX_CPU_PORT)
++ if (port == CONFIG_MV88E61XX_CPU_PORT) {
+ val |= PORT_REG_PHYS_CTRL_LINK_VALUE |
+ PORT_REG_PHYS_CTRL_LINK_FORCE;
++#if defined(CONFIG_MV88E61XX_CPU_PORT_RX_DELAY)
++ val |= PORT_REG_PHYS_CTRL_RGMII_RX_DELAY;
++#endif
++#if defined(CONFIG_MV88E61XX_CPU_PORT_TX_DELAY)
++ val |= PORT_REG_PHYS_CTRL_RGMII_TX_DELAY;
++#endif
++ }
+
+ return mv88e61xx_port_write(phydev, port, PORT_REG_PHYS_CTRL,
+ val);
+--
+2.20.1
+
diff --git a/package/boot/uboot-kirkwood/patches/702-phy-mv88e61xx-add-support-for-MV88E6171.patch b/package/boot/uboot-kirkwood/patches/702-phy-mv88e61xx-add-support-for-MV88E6171.patch
new file mode 100644
index 0000000000..c91a06cbed
--- /dev/null
+++ b/package/boot/uboot-kirkwood/patches/702-phy-mv88e61xx-add-support-for-MV88E6171.patch
@@ -0,0 +1,67 @@
+From 7ffab66a99831ce5e3037b608d73565c9d1abd20 Mon Sep 17 00:00:00 2001
+From: Pawel Dembicki <paweldembicki@gmail.com>
+Date: Thu, 23 Jan 2020 22:09:51 +0100
+Subject: [PATCH 2/2] phy: mv88e61xx: add support for MV88E6171
+
+This patch add MV88E6171 id to driver data.
+
+Tested on Checkpoint L-50 board.
+
+Cc: Chris Packham <judge.packham@gmail.com>
+Cc: Joe Hershberger <joe.hershberger@ni.com>
+Cc: Anatolij Gustschin <agust@denx.de>
+Cc: Tim Harvey <tharvey@gateworks.com>
+Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
+---
+ drivers/net/phy/mv88e61xx.c | 14 ++++++++++++++
+ 1 file changed, 14 insertions(+)
+
+diff --git a/drivers/net/phy/mv88e61xx.c b/drivers/net/phy/mv88e61xx.c
+index 889327639d..e0b648a54e 100644
+--- a/drivers/net/phy/mv88e61xx.c
++++ b/drivers/net/phy/mv88e61xx.c
+@@ -180,6 +180,7 @@
+ #define PORT_SWITCH_ID_6071 0x0710
+ #define PORT_SWITCH_ID_6096 0x0980
+ #define PORT_SWITCH_ID_6097 0x0990
++#define PORT_SWITCH_ID_6171 0x1710
+ #define PORT_SWITCH_ID_6172 0x1720
+ #define PORT_SWITCH_ID_6176 0x1760
+ #define PORT_SWITCH_ID_6220 0x2200
+@@ -997,6 +998,7 @@ static int mv88e61xx_probe(struct phy_device *phydev)
+ switch (priv->id) {
+ case PORT_SWITCH_ID_6096:
+ case PORT_SWITCH_ID_6097:
++ case PORT_SWITCH_ID_6171:
+ case PORT_SWITCH_ID_6172:
+ case PORT_SWITCH_ID_6176:
+ case PORT_SWITCH_ID_6240:
+@@ -1152,6 +1154,17 @@ static struct phy_driver mv88e61xx_driver = {
+ .shutdown = &genphy_shutdown,
+ };
+
++static struct phy_driver mv88e617x_driver = {
++ .name = "Marvell MV88E617x",
++ .uid = 0x01410e70,
++ .mask = 0xfffffff0,
++ .features = PHY_GBIT_FEATURES,
++ .probe = mv88e61xx_probe,
++ .config = mv88e61xx_phy_config,
++ .startup = mv88e61xx_phy_startup,
++ .shutdown = &genphy_shutdown,
++};
++
+ static struct phy_driver mv88e609x_driver = {
+ .name = "Marvell MV88E609x",
+ .uid = 0x1410c89,
+@@ -1177,6 +1190,7 @@ static struct phy_driver mv88e6071_driver = {
+ int phy_mv88e61xx_init(void)
+ {
+ phy_register(&mv88e61xx_driver);
++ phy_register(&mv88e617x_driver);
+ phy_register(&mv88e609x_driver);
+ phy_register(&mv88e6071_driver);
+
+--
+2.20.1
+