aboutsummaryrefslogtreecommitdiffstats
path: root/docs
diff options
context:
space:
mode:
authorFlorian Fainelli <florian@openwrt.org>2007-10-26 16:21:03 +0000
committerFlorian Fainelli <florian@openwrt.org>2007-10-26 16:21:03 +0000
commit773c31afdcd77564d10cc7b622344d0eb8884758 (patch)
treef6e28b164edf3a23aa00488efa52bbc25dfd125f /docs
parentda7afd8577368819993d7d16bc9c6191accd6274 (diff)
downloadupstream-773c31afdcd77564d10cc7b622344d0eb8884758.tar.gz
upstream-773c31afdcd77564d10cc7b622344d0eb8884758.tar.bz2
upstream-773c31afdcd77564d10cc7b622344d0eb8884758.zip
Document the IPv6 connectivity with OpenWrt.
SVN-Revision: 9452
Diffstat (limited to 'docs')
-rw-r--r--docs/network.tex46
-rw-r--r--docs/wireless.tex2
2 files changed, 47 insertions, 1 deletions
diff --git a/docs/network.tex b/docs/network.tex
index df67eed714..2c65dd2958 100644
--- a/docs/network.tex
+++ b/docs/network.tex
@@ -114,3 +114,49 @@ config switch "eth0"
option vlan1 "0 5"
option vlan2 "4 5"
\end{Verbatim}
+
+\subsubsection{Setting up IPv6 connectivity}
+
+OpenWrt supports IPv6 connectivity using PPP, Tunnel brokers or static
+assignment.
+
+If you use PPP, IPv6 will be setup using IP6CP and there is nothing to
+configure.
+
+To setup an IPv6 tunnel to a tunnel broker, you have to edit the
+\texttt{/etc/config/6tunnel} file and change the settings accordingly :
+
+\begin{Verbatim}
+config 6tunnel
+ option tnlifname 'sixbone'
+ option remoteip4 '1.0.0.1'
+ option localip4 '1.0.0.2'
+ option localip6 '2001::DEAD::BEEF::1'
+ option prefix '/64'
+\end{Verbatim}
+
+\begin{itemize}
+ \item{\texttt{'tnlifname'}:}
+ Set the interface name of the IPv6 in IPv4 tunnel
+ \item{\texttt{'remoteip4'}:}
+ IP address of the remote end to establish the 6in4 tunnel.
+ This address is given by the tunnel broker
+ \item{\texttt{'localip4'}:}
+ IP address of your router to establish the 6in4 tunnel.
+ It will usually match your WAN IP address.
+ \item{\texttt{'localip6'}:}
+ IPv6 address to setup on your tunnel side
+ This address is given by the tunnel broker
+ \item{\texttt{'prefix'}:}
+ IPv6 prefix to setup on the LAN.
+\end{itemize}
+
+IPv6 static addressing is also supported using a similar setup as
+IPv4 but with the \texttt{ip6} prefixing (when applicable).
+
+\begin{Verbatim}
+config interface "lan"
+ option ifname "eth0"
+ option proto "static"
+ option ip6addr "fe80::200:ff:fe00:0/64"
+\end{Verbatim}
diff --git a/docs/wireless.tex b/docs/wireless.tex
index 5734fc093b..7e96239722 100644
--- a/docs/wireless.tex
+++ b/docs/wireless.tex
@@ -7,7 +7,7 @@ Each wireless driver has its own configuration script in \texttt{/lib/wifi/drive
driver specific options and configurations. This script is also calling driver specific binaries like wlc for
Broadcom, or hostapd and wpa\_supplicant for atheros.
-The reason for using such architecture, is that it abstracts the driver configuration
+The reason for using such architecture, is that it abstracts the driver configuration.
\paragraph{Generic Broadcom wireless config:}