ipq807x: add Arcadyan AW1000 support

Hardware specification:
  SoC: Qualcomm IPQ8072A
  Flash: Toshiba NAND 1GiB
  RAM: 1 GiB of DDR3 466 MHz
  Ethernet: 4x 1Gbps + 1x 2.5Gbps
  WiFi1: QCN5024 2.4GHz ax 4x4
  WiFi2: QCN5054 5GHz ax 4x4
  Button: WiFi, WPS, Reset
  Modem: RG500Q-EA
  USB: 1 x USB 3.0
  Power: DC 12V 4A

Flash instructions:
  1. Download the initramfs image, rename it to
     initramfs.bin, and host it with tftp server.
  2. Interrupt U-Boot and run these commands:
     tftpboot initramfs.bin
     bootm
  3. After openwrt boots up, use scp or luci web
     to upload sysupgrade.bin to upgrade.

Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
Reviewed-by: Robert Marko <robimarko@gmail.com>

8 files changed, 393 insertions, 8 deletions

diff --git a/package/firmware/ipq-wifi/Makefile b/package/firmware/ipq-wifi/Makefile
index 8da2ac4e1f3..cbd61c5be8a 100644
--- a/package/firmware/ipq-wifi/Makefile
+++ b/package/firmware/ipq-wifi/Makefile
@@ -28,6 +28,7 @@ endef
 # <https://wireless.wiki.kernel.org/en/users/drivers/ath10k/boardfiles>
 
 ALLWIFIBOARDS:= \
+	arcadyan_aw1000 \
 	buffalo_wxr-5950ax12 \
 	compex_wpq873 \
 	dynalink_dl-wrx36 \
@@ -136,6 +137,7 @@ endef
 # Board files should follow this name structure:
 #   board-<devicename>.<qca4019|qca9888|qca9889|qca9984|qca99x0|ipq8074>
 
+$(eval $(call generate-ipq-wifi-package,arcadyan_aw1000,Arcadyan AW1000))
 $(eval $(call generate-ipq-wifi-package,buffalo_wxr-5950ax12,Buffalo WXR-5950AX12))
 $(eval $(call generate-ipq-wifi-package,compex_wpq873,Compex WPQ-873))
 $(eval $(call generate-ipq-wifi-package,dynalink_dl-wrx36,Dynalink DL-WRX36))
diff --git a/target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq8072-aw1000.dts b/target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq8072-aw1000.dts
new file mode 100644
index 00000000000..495ebad17a3
--- /dev/null
+++ b/target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq8072-aw1000.dts
@@ -0,0 +1,345 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/* Copyright (c) 2023, Chukun Pan <amadeus@jmu.edu.cn> */
+
+/dts-v1/;
+
+#include "ipq8074.dtsi"
+#include "ipq8074-hk-cpu.dtsi"
+#include "ipq8074-ess.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Arcadyan AW1000";
+	compatible = "arcadyan,aw1000", "qcom,ipq8074";
+
+	aliases {
+		led-boot = &led_power;
+		led-failsafe = &led_power;
+		led-running = &led_power;
+		led-upgrade = &led_power;
+		serial0 = &blsp1_uart5;
+		/*
+		 * Aliases as required by u-boot
+		 * to patch MAC addresses
+		 */
+		ethernet0 = &dp1;
+		ethernet1 = &dp2;
+		ethernet2 = &dp3;
+		ethernet3 = &dp4;
+		ethernet4 = &dp6_syn;
+		label-mac-device = &dp1;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+		bootargs-append = " root=/dev/ubiblock0_1";
+	};
+
+	gpio-export {
+		compatible = "gpio-export";
+
+		lte-pwrkey {
+			gpio-export,name = "lte_pwrkey";
+			gpio-export,output = <1>;
+			gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>;
+		};
+
+		lte-power {
+			gpio-export,name = "lte_power";
+			gpio-export,output = <1>;
+			gpios = <&tlmm 30 GPIO_ACTIVE_HIGH>;
+		};
+
+		lte-reset {
+			gpio-export,name = "lte_reset";
+			gpio-export,output = <1>;
+			gpios = <&tlmm 63 GPIO_ACTIVE_HIGH>;
+		};
+
+		usb-vbus {
+			gpio-export,name = "usb_vbus";
+			gpio-export,output = <0>;
+			gpios = <&tlmm 9 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	keys {
+		compatible = "gpio-keys";
+
+		wlan {
+			label = "wlan";
+			linux,code = <KEY_WLAN>;
+			gpios = <&tlmm 2 GPIO_ACTIVE_LOW>;
+		};
+
+		wps {
+			label = "wps";
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&tlmm 62 GPIO_ACTIVE_LOW>;
+		};
+
+		reset {
+			label = "reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&tlmm 67 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	led-spi {
+		compatible = "spi-gpio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		sck-gpios = <&tlmm 18 GPIO_ACTIVE_HIGH>;
+		mosi-gpios = <&tlmm 19 GPIO_ACTIVE_HIGH>;
+
+		led_gpio: led-gpio@0 {
+			compatible = "fairchild,74hc595";
+			reg = <0>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			registers-number = <2>;
+			spi-max-frequency = <1000000>;
+			enable-gpios = <&tlmm 20 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led_power: power {
+			label = "green:power";
+			gpios = <&led_gpio 0 GPIO_ACTIVE_HIGH>;
+		};
+
+		wifi {
+			label = "green:wifi";
+			gpios = <&led_gpio 1 GPIO_ACTIVE_HIGH>;
+		};
+
+		internet {
+			label = "green:internet";
+			gpios = <&led_gpio 2 GPIO_ACTIVE_HIGH>;
+		};
+
+		5g-red {
+			label = "red:5g";
+			gpios = <&led_gpio 3 GPIO_ACTIVE_LOW>;
+		};
+
+		5g-green {
+			label = "green:5g";
+			gpios = <&led_gpio 4 GPIO_ACTIVE_LOW>;
+		};
+
+		5g-blue {
+			label = "blue:5g";
+			gpios = <&led_gpio 5 GPIO_ACTIVE_LOW>;
+		};
+
+		signal-red {
+			label = "red:signal";
+			gpios = <&led_gpio 6 GPIO_ACTIVE_LOW>;
+		};
+
+		signal-green {
+			label = "green:signal";
+			gpios = <&led_gpio 8 GPIO_ACTIVE_LOW>;
+		};
+
+		signal-blue {
+			label = "blue:signal";
+			gpios = <&led_gpio 9 GPIO_ACTIVE_LOW>;
+		};
+
+		phone {
+			label = "green:phone";
+			gpios = <&led_gpio 11 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&tlmm {
+	mdio_pins: mdio-pins {
+		mdc {
+			pins = "gpio68";
+			function = "mdc";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+
+		mdio {
+			pins = "gpio69";
+			function = "mdio";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+	};
+};
+
+&blsp1_uart5 {
+	status = "okay";
+};
+
+&cryptobam {
+	status = "okay";
+};
+
+&crypto {
+	status = "okay";
+};
+
+&prng {
+	status = "okay";
+};
+
+&qpic_bam {
+	status = "okay";
+};
+
+&qpic_nand {
+	status = "okay";
+
+	nand@0 {
+		reg = <0>;
+		nand-ecc-strength = <8>;
+		nand-ecc-step-size = <512>;
+		nand-bus-width = <8>;
+
+		partitions {
+			compatible = "qcom,smem-part";
+		};
+	};
+};
+
+&qusb_phy_0 {
+	status = "okay";
+};
+
+&qusb_phy_1 {
+	status = "okay";
+};
+
+&ssphy_0 {
+	status = "okay";
+};
+
+&ssphy_1 {
+	status = "okay";
+};
+
+&usb_0 {
+	status = "okay";
+};
+
+&usb_1 {
+	status = "okay";
+};
+
+&mdio {
+	status = "okay";
+
+	pinctrl-0 = <&mdio_pins>;
+	pinctrl-names = "default";
+	reset-gpios = <&tlmm 37 GPIO_ACTIVE_LOW>;
+
+	qca8075_0: ethernet-phy@0 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0>;
+	};
+
+	qca8075_1: ethernet-phy@1 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <1>;
+	};
+
+	qca8075_2: ethernet-phy@2 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <2>;
+	};
+
+	qca8075_3: ethernet-phy@3 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <3>;
+	};
+
+	qca8081: ethernet-phy@28 {
+		compatible = "ethernet-phy-id004d.d101";
+		reg = <28>;
+		reset-gpios = <&tlmm 64 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&switch {
+	status = "okay";
+
+	switch_lan_bmp = <(ESS_PORT1 | ESS_PORT2 | ESS_PORT3 | ESS_PORT4)>; /* lan port bitmap */
+	switch_wan_bmp = <ESS_PORT6>; /* wan port bitmap */
+	switch_mac_mode = <MAC_MODE_QSGMII>; /* mac mode for uniphy instance0*/
+	switch_mac_mode2 = <MAC_MODE_SGMII_PLUS>; /* mac mode for uniphy instance2*/
+
+	qcom,port_phyinfo {
+		port@1 {
+			port_id = <1>;
+			phy_address = <0>;
+		};
+		port@2 {
+			port_id = <2>;
+			phy_address = <1>;
+		};
+		port@3 {
+			port_id = <3>;
+			phy_address = <2>;
+		};
+		port@4 {
+			port_id = <4>;
+			phy_address = <3>;
+		};
+		port@6 {
+			port_id = <6>;
+			phy_address = <28>;
+			port_mac_sel = "QGMAC_PORT";
+		};
+	};
+};
+
+&edma {
+	status = "okay";
+};
+
+&dp1 {
+	status = "okay";
+	phy-handle = <&qca8075_0>;
+	label = "lan1";
+};
+
+&dp2 {
+	status = "okay";
+	phy-handle = <&qca8075_1>;
+	label = "lan2";
+};
+
+&dp3 {
+	status = "okay";
+	phy-handle = <&qca8075_2>;
+	label = "lan3";
+};
+
+&dp4 {
+	status = "okay";
+	phy-handle = <&qca8075_3>;
+	label = "lan4";
+};
+
+&dp6_syn {
+	status = "okay";
+	phy-handle = <&qca8081>;
+	label = "wan";
+};
+
+&wifi {
+	status = "okay";
+
+	qcom,ath11k-calibration-variant = "Arcadyan-AW1000";
+};
diff --git a/target/linux/qualcommax/image/ipq807x.mk b/target/linux/qualcommax/image/ipq807x.mk
index 6eb8ed2ce27..ce4d62d571d 100644
--- a/target/linux/qualcommax/image/ipq807x.mk
+++ b/target/linux/qualcommax/image/ipq807x.mk
@@ -33,6 +33,20 @@ define Build/wax6xx-netgear-tar
 	rm -rf $@.tmp
 endef
 
+define Device/arcadyan_aw1000
+	$(call Device/FitImage)
+	$(call Device/UbiFit)
+	DEVICE_VENDOR := Arcadyan
+	DEVICE_MODEL := AW1000
+	BLOCKSIZE := 256k
+	PAGESIZE := 4096
+	DEVICE_DTS_CONFIG := config@hk09
+	SOC := ipq8072
+	DEVICE_PACKAGES := ipq-wifi-arcadyan_aw1000 kmod-spi-gpio \
+		kmod-gpio-nxp-74hc164 kmod-usb-serial-option uqmi
+endef
+TARGET_DEVICES += arcadyan_aw1000
+
 define Device/buffalo_wxr-5950ax12
 	$(call Device/FitImage)
 	DEVICE_VENDOR := Buffalo
diff --git a/target/linux/qualcommax/ipq807x/base-files/etc/board.d/01_leds b/target/linux/qualcommax/ipq807x/base-files/etc/board.d/01_leds
index fb14a667cb0..5e478d75eec 100644
--- a/target/linux/qualcommax/ipq807x/base-files/etc/board.d/01_leds
+++ b/target/linux/qualcommax/ipq807x/base-files/etc/board.d/01_leds
@@ -6,6 +6,10 @@ board_config_update
 board=$(board_name)
 
 case "$board" in
+arcadyan,aw1000)
+	ucidef_set_led_netdev "5g" "5G" "green:5g" "wwan0"
+	ucidef_set_led_netdev "wan" "WAN" "green:internet" "wan"
+	;;
 edgecore,eap102)
 	ucidef_set_led_netdev "wan" "WAN" "green:wanpoe" "wan"
 	;;
diff --git a/target/linux/qualcommax/ipq807x/base-files/etc/board.d/02_network b/target/linux/qualcommax/ipq807x/base-files/etc/board.d/02_network
index 82f16519aaf..cb70b272833 100644
--- a/target/linux/qualcommax/ipq807x/base-files/etc/board.d/02_network
+++ b/target/linux/qualcommax/ipq807x/base-files/etc/board.d/02_network
@@ -11,6 +11,7 @@ ipq807x_setup_interfaces()
 	local board="$1"
 
 	case "$board" in
+	arcadyan,aw1000|\
 	buffalo,wxr-5950ax12|\
 	dynalink,dl-wrx36|\
 	xiaomi,ax9000)
diff --git a/target/linux/qualcommax/ipq807x/base-files/etc/hotplug.d/firmware/11-ath11k-caldata b/target/linux/qualcommax/ipq807x/base-files/etc/hotplug.d/firmware/11-ath11k-caldata
index 6139ff0faae..e14af795987 100644
--- a/target/linux/qualcommax/ipq807x/base-files/etc/hotplug.d/firmware/11-ath11k-caldata
+++ b/target/linux/qualcommax/ipq807x/base-files/etc/hotplug.d/firmware/11-ath11k-caldata
@@ -9,6 +9,7 @@ board=$(board_name)
 case "$FIRMWARE" in
 "ath11k/IPQ8074/hw2.0/cal-ahb-c000000.wifi.bin")
 	case "$board" in
+	arcadyan,aw1000|\
 	buffalo,wxr-5950ax12|\
 	compex,wpq873|\
 	dynalink,dl-wrx36|\
diff --git a/target/linux/qualcommax/ipq807x/base-files/etc/hotplug.d/ieee80211/11_fix_wifi_mac b/target/linux/qualcommax/ipq807x/base-files/etc/hotplug.d/ieee80211/11_fix_wifi_mac
new file mode 100644
index 00000000000..c7cacc99fe6
--- /dev/null
+++ b/target/linux/qualcommax/ipq807x/base-files/etc/hotplug.d/ieee80211/11_fix_wifi_mac
@@ -0,0 +1,17 @@
+[ "$ACTION" == "add" ] || exit 0
+
+PHYNBR=${DEVPATH##*/phy}
+
+[ -n $PHYNBR ] || exit 0
+
+. /lib/functions.sh
+. /lib/functions/system.sh
+
+board=$(board_name)
+
+case "$board" in
+	arcadyan,aw1000)
+		[ "$PHYNBR" = "0" ] && macaddr_add $(get_mac_label) 1 > /sys${DEVPATH}/macaddress
+		[ "$PHYNBR" = "1" ] && macaddr_add $(get_mac_label) 2 > /sys${DEVPATH}/macaddress
+		;;
+esac
diff --git a/target/linux/qualcommax/ipq807x/base-files/lib/upgrade/platform.sh b/target/linux/qualcommax/ipq807x/base-files/lib/upgrade/platform.sh
index cddf287b5e0..5a40d538837 100644
--- a/target/linux/qualcommax/ipq807x/base-files/lib/upgrade/platform.sh
+++ b/target/linux/qualcommax/ipq807x/base-files/lib/upgrade/platform.sh
@@ -43,14 +43,7 @@ platform_pre_upgrade() {
 
 platform_do_upgrade() {
 	case "$(board_name)" in
-	buffalo,wxr-5950ax12)
-		CI_KERN_UBIPART="rootfs"
-		CI_ROOT_UBIPART="user_property"
-		buffalo_upgrade_prepare
-		nand_do_flash_file "$1" || nand_do_upgrade_failed
-		nand_do_restore_config || nand_do_upgrade_failed
-		buffalo_upgrade_optvol
-		;;
+	arcadyan,aw1000|\
 	compex,wpq873|\
 	dynalink,dl-wrx36|\
 	edimax,cax1800|\
@@ -60,6 +53,14 @@ platform_do_upgrade() {
 	netgear,wax630)
 		nand_do_upgrade "$1"
 		;;
+	buffalo,wxr-5950ax12)
+		CI_KERN_UBIPART="rootfs"
+		CI_ROOT_UBIPART="user_property"
+		buffalo_upgrade_prepare
+		nand_do_flash_file "$1" || nand_do_upgrade_failed
+		nand_do_restore_config || nand_do_upgrade_failed
+		buffalo_upgrade_optvol
+		;;
 	edgecore,eap102)
 		active="$(fw_printenv -n active)"
 		if [ "$active" -eq "1" ]; then