Add watchdog driver, prevents device from rebooting. Kernel now fully usable Add patches for various image formats Add map for MTX-1 board (same as pb1500)

SVN-Revision: 3702

5 files changed, 2850 insertions, 551 deletions

diff --git a/openwrt/target/linux/au1000-2.6/Makefile b/openwrt/target/linux/au1000-2.6/Makefile
index c361f0e5e8..35ab1034cf 100644
--- a/openwrt/target/linux/au1000-2.6/Makefile
+++ b/openwrt/target/linux/au1000-2.6/Makefile
@@ -17,9 +17,10 @@ $(LINUX_DIR)/.patched: $(LINUX_DIR)/.unpacked
 	@$(CP) config $(LINUX_DIR)/.config
 	touch $@
 
-$(LINUX_BUILD_DIR)/bzImage: $(LINUX_DIR)/vmlinux
-	$(MAKE) -C $(LINUX_DIR) V=1 CROSS_COMPILE=$(TARGET_CROSS) ARCH=$(LINUX_KARCH) PATH=$(TARGET_PATH) bzImage $(MAKE_TRACE)
+$(LINUX_BUILD_DIR)/zImage: $(LINUX_DIR)/vmlinux
+	$(MAKE) -C $(LINUX_DIR) V=1 CROSS_COMPILE=$(TARGET_CROSS) ARCH=$(LINUX_KARCH) PATH=$(TARGET_PATH) zImage.flash $(MAKE_TRACE)
 	$(CP) $(LINUX_DIR)/vmlinux $@
+	echo "toto"
 	touch $@
 
 compile: $(LINUX_DIR)/vmlinux
diff --git a/openwrt/target/linux/au1000-2.6/config b/openwrt/target/linux/au1000-2.6/config
index 37dac8ed26..bb7e267ad1 100644
--- a/openwrt/target/linux/au1000-2.6/config
+++ b/openwrt/target/linux/au1000-2.6/config
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.16.2
-# Tue Apr 11 13:27:02 2006
+# Linux kernel version: 2.6.16.7
+# Sat Apr 22 16:46:55 2006
 #
 CONFIG_MIPS=y
 
@@ -113,7 +113,7 @@ CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_64KB is not set
 CONFIG_CPU_HAS_PREFETCH=y
 # CONFIG_MIPS_MT is not set
-# CONFIG_64BIT_PHYS_ADDR is not set
+CONFIG_64BIT_PHYS_ADDR=y
 # CONFIG_CPU_ADVANCED is not set
 CONFIG_CPU_HAS_LLSC=y
 CONFIG_CPU_HAS_SYNC=y
@@ -148,19 +148,21 @@ CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 # CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
 CONFIG_SYSCTL=y
 # CONFIG_AUDIT is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_EMBEDDED=y
-# CONFIG_KALLSYMS is not set
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
-# CONFIG_ELF_CORE is not set
+CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
@@ -169,10 +171,10 @@ CONFIG_CC_ALIGN_FUNCTIONS=0
 CONFIG_CC_ALIGN_LABELS=0
 CONFIG_CC_ALIGN_LOOPS=0
 CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_SLAB is not set
+CONFIG_SLAB=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
-CONFIG_SLOB=y
+# CONFIG_SLOB is not set
 CONFIG_OBSOLETE_INTERMODULE=y
 
 #
@@ -180,11 +182,11 @@ CONFIG_OBSOLETE_INTERMODULE=y
 #
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_MODULE_FORCE_UNLOAD=y
 CONFIG_OBSOLETE_MODPARM=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
+CONFIG_KMOD=y
 
 #
 # Block layer
@@ -196,8 +198,8 @@ CONFIG_OBSOLETE_MODPARM=y
 #
 CONFIG_IOSCHED_NOOP=y
 CONFIG_IOSCHED_AS=y
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
+CONFIG_IOSCHED_DEADLINE=m
+CONFIG_IOSCHED_CFQ=m
 CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_DEADLINE is not set
 # CONFIG_DEFAULT_CFQ is not set
@@ -226,7 +228,7 @@ CONFIG_MMU=y
 # Executable file formats
 #
 CONFIG_BINFMT_ELF=y
-CONFIG_BINFMT_MISC=m
+CONFIG_BINFMT_MISC=y
 CONFIG_TRAD_SIGNALS=y
 # CONFIG_PM is not set
 
@@ -239,12 +241,12 @@ CONFIG_NET=y
 # Networking options
 #
 # CONFIG_NETDEBUG is not set
-CONFIG_PACKET=y
+CONFIG_PACKET=m
 CONFIG_PACKET_MMAP=y
-CONFIG_UNIX=y
+CONFIG_UNIX=m
 CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_NET_KEY is not set
+CONFIG_XFRM_USER=m
+CONFIG_NET_KEY=m
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
 CONFIG_IP_ADVANCED_ROUTER=y
@@ -255,33 +257,35 @@ CONFIG_IP_MULTIPLE_TABLES=y
 CONFIG_IP_ROUTE_FWMARK=y
 CONFIG_IP_ROUTE_MULTIPATH=y
 # CONFIG_IP_ROUTE_MULTIPATH_CACHED is not set
-# CONFIG_IP_ROUTE_VERBOSE is not set
-# CONFIG_IP_PNP is not set
+CONFIG_IP_ROUTE_VERBOSE=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
 CONFIG_NET_IPIP=m
 CONFIG_NET_IPGRE=m
-# CONFIG_NET_IPGRE_BROADCAST is not set
-CONFIG_IPSEC_NAT_TRAVERSAL=y
+CONFIG_NET_IPGRE_BROADCAST=y
+# CONFIG_IPSEC_NAT_TRAVERSAL is not set
 # CONFIG_IP_MROUTE is not set
 # CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
+CONFIG_SYN_COOKIES=y
+CONFIG_INET_AH=m
+CONFIG_INET_ESP=m
+CONFIG_INET_IPCOMP=m
 CONFIG_INET_TUNNEL=m
-CONFIG_INET_DIAG=m
-CONFIG_INET_TCP_DIAG=m
+# CONFIG_INET_DIAG is not set
 CONFIG_TCP_CONG_ADVANCED=y
 
 #
 # TCP congestion control
 #
-CONFIG_TCP_CONG_BIC=m
-CONFIG_TCP_CONG_CUBIC=m
+CONFIG_TCP_CONG_BIC=y
+# CONFIG_TCP_CONG_CUBIC is not set
 CONFIG_TCP_CONG_WESTWOOD=m
 CONFIG_TCP_CONG_HTCP=m
 CONFIG_TCP_CONG_HSTCP=m
 CONFIG_TCP_CONG_HYBLA=m
-CONFIG_TCP_CONG_VEGAS=y
+CONFIG_TCP_CONG_VEGAS=m
 CONFIG_TCP_CONG_SCALABLE=m
 
 #
@@ -289,136 +293,44 @@ CONFIG_TCP_CONG_SCALABLE=m
 #
 # CONFIG_IP_VS is not set
 CONFIG_IPV6=m
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_INET6_AH is not set
-# CONFIG_INET6_ESP is not set
-# CONFIG_INET6_IPCOMP is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_IPV6_TUNNEL is not set
+CONFIG_IPV6_PRIVACY=y
+CONFIG_INET6_AH=m
+CONFIG_INET6_ESP=m
+CONFIG_INET6_IPCOMP=m
+CONFIG_INET6_TUNNEL=m
+CONFIG_IPV6_TUNNEL=m
 CONFIG_NETFILTER=y
 # CONFIG_NETFILTER_DEBUG is not set
-# CONFIG_BRIDGE_NETFILTER is not set
+CONFIG_BRIDGE_NETFILTER=y
 
 #
 # Core Netfilter Configuration
 #
 # CONFIG_NETFILTER_NETLINK is not set
-CONFIG_NETFILTER_XTABLES=y
-CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
-CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
-CONFIG_NETFILTER_XT_TARGET_MARK=m
-# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
-# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
-# CONFIG_NETFILTER_XT_MATCH_CONNBYTES is not set
-CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
-CONFIG_NETFILTER_XT_MATCH_CONNTRACK=y
-# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
-CONFIG_NETFILTER_XT_MATCH_HELPER=m
-CONFIG_NETFILTER_XT_MATCH_LENGTH=m
-CONFIG_NETFILTER_XT_MATCH_LIMIT=m
-CONFIG_NETFILTER_XT_MATCH_MAC=m
-CONFIG_NETFILTER_XT_MATCH_MARK=m
-# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
-# CONFIG_NETFILTER_XT_MATCH_REALM is not set
-# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
-CONFIG_NETFILTER_XT_MATCH_STATE=y
-# CONFIG_NETFILTER_XT_MATCH_STRING is not set
-CONFIG_NETFILTER_XT_MATCH_TCPMSS=y
+# CONFIG_NETFILTER_XTABLES is not set
 
 #
 # IP: Netfilter Configuration
 #
-CONFIG_IP_NF_CONNTRACK=y
+CONFIG_IP_NF_CONNTRACK=m
 CONFIG_IP_NF_CT_ACCT=y
 CONFIG_IP_NF_CONNTRACK_MARK=y
 # CONFIG_IP_NF_CONNTRACK_EVENTS is not set
-# CONFIG_IP_NF_CT_PROTO_SCTP is not set
-CONFIG_IP_NF_FTP=y
-CONFIG_IP_NF_IRC=y
+CONFIG_IP_NF_CT_PROTO_SCTP=m
+CONFIG_IP_NF_FTP=m
+CONFIG_IP_NF_IRC=m
 # CONFIG_IP_NF_NETBIOS_NS is not set
 CONFIG_IP_NF_TFTP=m
 CONFIG_IP_NF_AMANDA=m
-CONFIG_IP_NF_PPTP=m
-CONFIG_IP_NF_SIP=m
+# CONFIG_IP_NF_PPTP is not set
+# CONFIG_IP_NF_SIP is not set
 CONFIG_IP_NF_QUEUE=m
-CONFIG_IP_NF_IPTABLES=y
-CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_LAYER7=m
-# CONFIG_IP_NF_MATCH_LAYER7_DEBUG is not set
-CONFIG_IP_NF_MATCH_MULTIPORT=m
-CONFIG_IP_NF_MATCH_IPP2P=m
-CONFIG_IP_NF_MATCH_TOS=m
-CONFIG_IP_NF_MATCH_TIME=m
-CONFIG_IP_NF_MATCH_RECENT=m
-CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_DSCP=m
-CONFIG_IP_NF_MATCH_AH_ESP=m
-CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_OWNER=m
-# CONFIG_IP_NF_MATCH_ADDRTYPE is not set
-# CONFIG_IP_NF_MATCH_HASHLIMIT is not set
-# CONFIG_IP_NF_MATCH_POLICY is not set
-CONFIG_IP_NF_FILTER=y
-CONFIG_IP_NF_TARGET_REJECT=y
-CONFIG_IP_NF_TARGET_IMQ=m
-# CONFIG_IP_NF_TARGET_LOG is not set
-CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_IP_NF_TARGET_TCPMSS=y
-CONFIG_IP_NF_NAT=y
-CONFIG_IP_NF_NAT_NEEDED=y
-CONFIG_IP_NF_TARGET_MASQUERADE=y
-CONFIG_IP_NF_TARGET_REDIRECT=y
-# CONFIG_IP_NF_TARGET_NETMAP is not set
-# CONFIG_IP_NF_TARGET_SAME is not set
-# CONFIG_IP_NF_NAT_SNMP_BASIC is not set
-CONFIG_IP_NF_NAT_IRC=y
-CONFIG_IP_NF_NAT_FTP=y
-CONFIG_IP_NF_NAT_TFTP=m
-CONFIG_IP_NF_NAT_AMANDA=m
-CONFIG_IP_NF_NAT_PPTP=m
-CONFIG_IP_NF_NAT_SIP=m
-CONFIG_IP_NF_MANGLE=y
-CONFIG_IP_NF_TARGET_TOS=m
-CONFIG_IP_NF_TARGET_ECN=m
-CONFIG_IP_NF_TARGET_DSCP=m
-CONFIG_IP_NF_TARGET_TTL=m
-# CONFIG_IP_NF_TARGET_CLUSTERIP is not set
-# CONFIG_IP_NF_RAW is not set
-# CONFIG_IP_NF_ARPTABLES is not set
-CONFIG_IP_NF_SET=m
-CONFIG_IP_NF_SET_MAX=256
-CONFIG_IP_NF_SET_HASHSIZE=1024
-CONFIG_IP_NF_SET_IPMAP=m
-CONFIG_IP_NF_SET_MACIPMAP=m
-CONFIG_IP_NF_SET_PORTMAP=m
-CONFIG_IP_NF_SET_IPHASH=m
-CONFIG_IP_NF_SET_NETHASH=m
-CONFIG_IP_NF_SET_IPTREE=m
-CONFIG_IP_NF_MATCH_SET=m
-CONFIG_IP_NF_TARGET_SET=m
+# CONFIG_IP_NF_SET is not set
 
 #
 # IPv6: Netfilter Configuration (EXPERIMENTAL)
 #
 CONFIG_IP6_NF_QUEUE=m
-CONFIG_IP6_NF_IPTABLES=m
-# CONFIG_IP6_NF_MATCH_RT is not set
-# CONFIG_IP6_NF_MATCH_OPTS is not set
-# CONFIG_IP6_NF_MATCH_FRAG is not set
-# CONFIG_IP6_NF_MATCH_HL is not set
-CONFIG_IP6_NF_MATCH_MULTIPORT=m
-CONFIG_IP6_NF_MATCH_OWNER=m
-# CONFIG_IP6_NF_MATCH_IPV6HEADER is not set
-# CONFIG_IP6_NF_MATCH_AHESP is not set
-CONFIG_IP6_NF_MATCH_EUI64=m
-# CONFIG_IP6_NF_MATCH_POLICY is not set
-CONFIG_IP6_NF_FILTER=m
-CONFIG_IP6_NF_TARGET_IMQ=m
-# CONFIG_IP6_NF_TARGET_LOG is not set
-CONFIG_IP6_NF_TARGET_REJECT=m
-CONFIG_IP6_NF_MANGLE=m
-# CONFIG_IP6_NF_TARGET_HL is not set
-# CONFIG_IP6_NF_RAW is not set
 
 #
 # Bridge: Netfilter Configuration
@@ -458,17 +370,12 @@ CONFIG_BRIDGE_EBT_ULOG=m
 # TIPC Configuration (EXPERIMENTAL)
 #
 # CONFIG_TIPC is not set
-CONFIG_ATM=m
-CONFIG_ATM_CLIP=m
-CONFIG_ATM_CLIP_NO_ICMP=y
-CONFIG_ATM_LANE=m
-CONFIG_ATM_MPOA=m
-CONFIG_ATM_BR2684=m
-CONFIG_ATM_BR2684_IPFILTER=y
-CONFIG_BRIDGE=y
-CONFIG_VLAN_8021Q=y
+# CONFIG_ATM is not set
+CONFIG_BRIDGE=m
+CONFIG_VLAN_8021Q=m
 # CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
+CONFIG_LLC=m
+CONFIG_LLC2=m
 # CONFIG_IPX is not set
 # CONFIG_ATALK is not set
 # CONFIG_X25 is not set
@@ -491,16 +398,15 @@ CONFIG_NET_SCH_CLK_JIFFIES=y
 CONFIG_NET_SCH_CBQ=m
 CONFIG_NET_SCH_HTB=m
 CONFIG_NET_SCH_HFSC=m
-CONFIG_NET_SCH_ATM=m
 CONFIG_NET_SCH_PRIO=m
 CONFIG_NET_SCH_RED=m
 CONFIG_NET_SCH_SFQ=m
-CONFIG_NET_SCH_ESFQ=m
+# CONFIG_NET_SCH_ESFQ is not set
 CONFIG_NET_SCH_TEQL=m
 CONFIG_NET_SCH_TBF=m
 CONFIG_NET_SCH_GRED=m
 CONFIG_NET_SCH_DSMARK=m
-# CONFIG_NET_SCH_NETEM is not set
+CONFIG_NET_SCH_NETEM=m
 CONFIG_NET_SCH_INGRESS=m
 
 #
@@ -513,67 +419,35 @@ CONFIG_NET_CLS_ROUTE4=m
 CONFIG_NET_CLS_ROUTE=y
 CONFIG_NET_CLS_FW=m
 CONFIG_NET_CLS_U32=m
-# CONFIG_CLS_U32_PERF is not set
-# CONFIG_CLS_U32_MARK is not set
+CONFIG_CLS_U32_PERF=y
+CONFIG_CLS_U32_MARK=y
 CONFIG_NET_CLS_RSVP=m
 CONFIG_NET_CLS_RSVP6=m
-# CONFIG_NET_EMATCH is not set
-# CONFIG_NET_CLS_ACT is not set
-CONFIG_NET_CLS_POLICE=y
+CONFIG_NET_EMATCH=y
+CONFIG_NET_EMATCH_STACK=32
+CONFIG_NET_EMATCH_CMP=m
+CONFIG_NET_EMATCH_NBYTE=m
+CONFIG_NET_EMATCH_U32=m
+CONFIG_NET_EMATCH_META=m
+CONFIG_NET_EMATCH_TEXT=m
+CONFIG_NET_CLS_ACT=y
+CONFIG_NET_ACT_POLICE=m
+CONFIG_NET_ACT_GACT=m
+CONFIG_GACT_PROB=y
+CONFIG_NET_ACT_MIRRED=m
+CONFIG_NET_ACT_PEDIT=m
+CONFIG_NET_ACT_SIMP=m
 # CONFIG_NET_CLS_IND is not set
 CONFIG_NET_ESTIMATOR=y
 
 #
 # Network testing
 #
-# CONFIG_NET_PKTGEN is not set
-CONFIG_HAMRADIO=y
-
-#
-# Packet Radio protocols
-#
-CONFIG_AX25=m
-# CONFIG_AX25_DAMA_SLAVE is not set
-# CONFIG_NETROM is not set
-# CONFIG_ROSE is not set
-
-#
-# AX.25 network device drivers
-#
-CONFIG_MKISS=m
-# CONFIG_6PACK is not set
-# CONFIG_BPQETHER is not set
-# CONFIG_BAYCOM_SER_FDX is not set
-# CONFIG_BAYCOM_SER_HDX is not set
-# CONFIG_YAM is not set
+CONFIG_NET_PKTGEN=m
+# CONFIG_HAMRADIO is not set
 # CONFIG_IRDA is not set
-CONFIG_BT=m
-CONFIG_BT_L2CAP=m
-CONFIG_BT_SCO=m
-CONFIG_BT_RFCOMM=m
-CONFIG_BT_RFCOMM_TTY=y
-CONFIG_BT_BNEP=m
-CONFIG_BT_BNEP_MC_FILTER=y
-CONFIG_BT_BNEP_PROTO_FILTER=y
-CONFIG_BT_HIDP=m
-
-#
-# Bluetooth device drivers
-#
-CONFIG_BT_HCIUSB=m
-CONFIG_BT_HCIUSB_SCO=y
-CONFIG_BT_HCIUART=m
-CONFIG_BT_HCIUART_H4=y
-CONFIG_BT_HCIUART_BCSP=y
-# CONFIG_BT_HCIBCM203X is not set
-# CONFIG_BT_HCIBPA10X is not set
-# CONFIG_BT_HCIBFUSB is not set
-# CONFIG_BT_HCIVHCI is not set
-CONFIG_IEEE80211=m
-# CONFIG_IEEE80211_DEBUG is not set
-CONFIG_IEEE80211_CRYPT_WEP=m
-CONFIG_IEEE80211_CRYPT_CCMP=m
-CONFIG_IEEE80211_CRYPT_TKIP=m
+# CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
 
 #
 # Device Drivers
@@ -582,21 +456,21 @@ CONFIG_IEEE80211_CRYPT_TKIP=m
 #
 # Generic Driver Options
 #
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_STANDALONE is not set
+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
 CONFIG_FW_LOADER=y
 
 #
 # Connector - unified userspace <-> kernelspace linker
 #
-CONFIG_CONNECTOR=m
+# CONFIG_CONNECTOR is not set
 
 #
 # Memory Technology Devices (MTD)
 #
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
 # CONFIG_MTD_REDBOOT_PARTS is not set
 # CONFIG_MTD_CMDLINE_PARTS is not set
@@ -628,7 +502,7 @@ CONFIG_MTD_CFI_I1=y
 CONFIG_MTD_CFI_I2=y
 # CONFIG_MTD_CFI_I4 is not set
 # CONFIG_MTD_CFI_I8 is not set
-CONFIG_MTD_CFI_INTELEXT=y
+# CONFIG_MTD_CFI_INTELEXT is not set
 CONFIG_MTD_CFI_AMDSTD=y
 CONFIG_MTD_CFI_AMDSTD_RETRY=0
 # CONFIG_MTD_CFI_STAA is not set
@@ -641,11 +515,10 @@ CONFIG_MTD_CFI_UTIL=y
 #
 # Mapping drivers for chip access
 #
-CONFIG_MTD_COMPLEX_MAPPINGS=y
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
 # CONFIG_MTD_PHYSMAP is not set
 # CONFIG_MTD_ALCHEMY is not set
 CONFIG_MTD_MTX1=y
-# CONFIG_MTD_PCI is not set
 # CONFIG_MTD_PLATRAM is not set
 
 #
@@ -697,8 +570,9 @@ CONFIG_BLK_DEV_CRYPTOLOOP=m
 CONFIG_BLK_DEV_NBD=m
 # CONFIG_BLK_DEV_SX8 is not set
 # CONFIG_BLK_DEV_UB is not set
-# CONFIG_BLK_DEV_RAM is not set
+CONFIG_BLK_DEV_RAM=m
 CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
 
@@ -712,7 +586,7 @@ CONFIG_BLK_DEV_RAM_COUNT=16
 #
 # CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=m
-CONFIG_SCSI_PROC_FS=y
+# CONFIG_SCSI_PROC_FS is not set
 
 #
 # SCSI support type (disk, tape, CD-ROM)
@@ -721,14 +595,14 @@ CONFIG_BLK_DEV_SD=m
 # CONFIG_CHR_DEV_ST is not set
 # CONFIG_CHR_DEV_OSST is not set
 # CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
+CONFIG_CHR_DEV_SG=m
 # CONFIG_CHR_DEV_SCH is not set
 
 #
 # Some SCSI devices (e.g. CD jukebox) support multiple LUNs
 #
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
+CONFIG_SCSI_MULTI_LUN=y
+CONFIG_SCSI_CONSTANTS=y
 # CONFIG_SCSI_LOGGING is not set
 
 #
@@ -798,15 +672,11 @@ CONFIG_BLK_DEV_SD=m
 # Network device support
 #
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
+# CONFIG_IFB is not set
+CONFIG_DUMMY=m
+CONFIG_BONDING=m
 # CONFIG_EQUALIZER is not set
-CONFIG_IMQ=m
-# CONFIG_IMQ_BEHAVIOR_AA is not set
-# CONFIG_IMQ_BEHAVIOR_AB is not set
-CONFIG_IMQ_BEHAVIOR_BA=y
-# CONFIG_IMQ_BEHAVIOR_BB is not set
-CONFIG_IMQ_NUM_DEVS=2
+# CONFIG_IMQ is not set
 CONFIG_TUN=m
 
 #
@@ -837,26 +707,7 @@ CONFIG_MIPS_AU1X00_ENET=y
 #
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
-CONFIG_NET_PCI=y
-# CONFIG_PCNET32 is not set
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
-# CONFIG_DGRS is not set
-# CONFIG_EEPRO100 is not set
-# CONFIG_E100 is not set
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
-# CONFIG_8139CP is not set
-# CONFIG_8139TOO is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_TLAN is not set
-# CONFIG_VIA_RHINE is not set
-# CONFIG_LAN_SAA9730 is not set
+# CONFIG_NET_PCI is not set
 
 #
 # Ethernet (1000 Mbit)
@@ -872,7 +723,6 @@ CONFIG_NET_PCI=y
 # CONFIG_SKGE is not set
 # CONFIG_SKY2 is not set
 # CONFIG_SK98LIN is not set
-# CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
 
@@ -896,20 +746,15 @@ CONFIG_NET_RADIO=y
 #
 # Obsolete Wireless cards support (pre-802.11)
 #
-# CONFIG_STRIP is not set
+CONFIG_STRIP=m
 
 #
 # Wireless 802.11b ISA/PCI cards support
 #
-CONFIG_IPW2100=m
-CONFIG_IPW2100_MONITOR=y
-# CONFIG_IPW2100_DEBUG is not set
-CONFIG_IPW2200=m
-# CONFIG_IPW2200_DEBUG is not set
 CONFIG_HERMES=m
-CONFIG_PLX_HERMES=m
-CONFIG_TMD_HERMES=m
-CONFIG_NORTEL_HERMES=m
+# CONFIG_PLX_HERMES is not set
+# CONFIG_TMD_HERMES is not set
+# CONFIG_NORTEL_HERMES is not set
 CONFIG_PCI_HERMES=m
 CONFIG_ATMEL=m
 CONFIG_PCI_ATMEL=m
@@ -918,49 +763,27 @@ CONFIG_PCI_ATMEL=m
 # Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support
 #
 CONFIG_PRISM54=m
-CONFIG_HOSTAP=m
-CONFIG_HOSTAP_FIRMWARE=y
-CONFIG_HOSTAP_FIRMWARE_NVRAM=y
-CONFIG_HOSTAP_PLX=m
-CONFIG_HOSTAP_PCI=m
+# CONFIG_HOSTAP is not set
 CONFIG_NET_WIRELESS=y
 
 #
 # Wan interfaces
 #
 # CONFIG_WAN is not set
-
-#
-# ATM drivers
-#
-CONFIG_ATM_DUMMY=m
-CONFIG_ATM_TCP=m
-# CONFIG_ATM_LANAI is not set
-# CONFIG_ATM_ENI is not set
-# CONFIG_ATM_FIRESTREAM is not set
-# CONFIG_ATM_ZATM is not set
-# CONFIG_ATM_NICSTAR is not set
-# CONFIG_ATM_IDT77252 is not set
-# CONFIG_ATM_AMBASSADOR is not set
-# CONFIG_ATM_HORIZON is not set
-# CONFIG_ATM_IA is not set
-# CONFIG_ATM_FORE200E_MAYBE is not set
-# CONFIG_ATM_HE is not set
 # CONFIG_FDDI is not set
 # CONFIG_HIPPI is not set
 CONFIG_PPP=m
-# CONFIG_PPP_MULTILINK is not set
+CONFIG_PPP_MULTILINK=y
 CONFIG_PPP_FILTER=y
 CONFIG_PPP_ASYNC=m
-# CONFIG_PPP_SYNC_TTY is not set
+CONFIG_PPP_SYNC_TTY=m
 CONFIG_PPP_DEFLATE=m
 CONFIG_PPP_BSDCOMP=m
-CONFIG_PPP_MPPE=m
+# CONFIG_PPP_MPPE is not set
 CONFIG_PPPOE=m
-CONFIG_PPPOATM=m
 # CONFIG_SLIP is not set
 # CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
+CONFIG_SHAPER=m
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
@@ -978,7 +801,7 @@ CONFIG_PPPOATM=m
 #
 # Input device support
 #
-CONFIG_INPUT=m
+CONFIG_INPUT=y
 
 #
 # Userland interfaces
@@ -986,7 +809,7 @@ CONFIG_INPUT=m
 # CONFIG_INPUT_MOUSEDEV is not set
 # CONFIG_INPUT_JOYDEV is not set
 # CONFIG_INPUT_TSDEV is not set
-CONFIG_INPUT_EVDEV=m
+# CONFIG_INPUT_EVDEV is not set
 # CONFIG_INPUT_EVBUG is not set
 
 #
@@ -1007,7 +830,9 @@ CONFIG_INPUT_EVDEV=m
 #
 # Character devices
 #
-# CONFIG_VT is not set
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -1015,10 +840,10 @@ CONFIG_INPUT_EVDEV=m
 #
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=2
-CONFIG_SERIAL_8250_RUNTIME_UARTS=2
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 # CONFIG_SERIAL_8250_EXTENDED is not set
-# CONFIG_SERIAL_8250_AU1X00 is not set
+CONFIG_SERIAL_8250_AU1X00=y
 
 #
 # Non-8250 serial port support
@@ -1038,9 +863,29 @@ CONFIG_UNIX98_PTYS=y
 #
 # Watchdog Cards
 #
-# CONFIG_WATCHDOG is not set
-# CONFIG_RTC is not set
-# CONFIG_GEN_RTC is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+CONFIG_SOFT_WATCHDOG=m
+CONFIG_MTX1_WATCHDOG=y
+
+#
+# PCI-based Watchdog Cards
+#
+CONFIG_PCIPCWATCHDOG=m
+CONFIG_WDTPCI=m
+CONFIG_WDT_501_PCI=y
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+CONFIG_RTC=m
+CONFIG_GEN_RTC=m
+CONFIG_GEN_RTC_X=y
 # CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
@@ -1090,29 +935,7 @@ CONFIG_UNIX98_PTYS=y
 #
 # Multimedia devices
 #
-CONFIG_VIDEO_DEV=m
-
-#
-# Video For Linux
-#
-
-#
-# Video Adapters
-#
-# CONFIG_VIDEO_ADV_DEBUG is not set
-# CONFIG_VIDEO_CPIA is not set
-# CONFIG_VIDEO_STRADIS is not set
-# CONFIG_VIDEO_MXB is not set
-# CONFIG_VIDEO_DPC is not set
-# CONFIG_VIDEO_HEXIUM_ORION is not set
-# CONFIG_VIDEO_HEXIUM_GEMINI is not set
-
-#
-# Radio Adapters
-#
-# CONFIG_RADIO_GEMTEK_PCI is not set
-# CONFIG_RADIO_MAXIRADIO is not set
-# CONFIG_RADIO_MAESTRO is not set
+# CONFIG_VIDEO_DEV is not set
 
 #
 # Digital Video Broadcasting Devices
@@ -1125,93 +948,15 @@ CONFIG_VIDEO_DEV=m
 # CONFIG_FB is not set
 
 #
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+
+#
 # Sound
 #
-CONFIG_SOUND=m
-
-#
-# Advanced Linux Sound Architecture
-#
-CONFIG_SND=m
-CONFIG_SND_TIMER=m
-CONFIG_SND_PCM=m
-CONFIG_SND_HWDEP=m
-CONFIG_SND_RAWMIDI=m
-# CONFIG_SND_SEQUENCER is not set
-# CONFIG_SND_MIXER_OSS is not set
-# CONFIG_SND_PCM_OSS is not set
-# CONFIG_SND_DYNAMIC_MINORS is not set
-# CONFIG_SND_SUPPORT_OLD_API is not set
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-
-#
-# Generic devices
-#
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-
-#
-# PCI devices
-#
-# CONFIG_SND_AD1889 is not set
-# CONFIG_SND_ALI5451 is not set
-# CONFIG_SND_ATIIXP is not set
-# CONFIG_SND_ATIIXP_MODEM is not set
-# CONFIG_SND_AU8810 is not set
-# CONFIG_SND_AU8820 is not set
-# CONFIG_SND_AU8830 is not set
-# CONFIG_SND_AZT3328 is not set
-# CONFIG_SND_BT87X is not set
-# CONFIG_SND_CA0106 is not set
-# CONFIG_SND_CMIPCI is not set
-# CONFIG_SND_CS4281 is not set
-# CONFIG_SND_CS46XX is not set
-# CONFIG_SND_EMU10K1 is not set
-# CONFIG_SND_EMU10K1X is not set
-# CONFIG_SND_ENS1370 is not set
-# CONFIG_SND_ENS1371 is not set
-# CONFIG_SND_ES1938 is not set
-# CONFIG_SND_ES1968 is not set
-# CONFIG_SND_FM801 is not set
-# CONFIG_SND_HDA_INTEL is not set
-# CONFIG_SND_HDSP is not set
-# CONFIG_SND_HDSPM is not set
-# CONFIG_SND_ICE1712 is not set
-# CONFIG_SND_ICE1724 is not set
-# CONFIG_SND_INTEL8X0 is not set
-# CONFIG_SND_INTEL8X0M is not set
-# CONFIG_SND_KORG1212 is not set
-# CONFIG_SND_MAESTRO3 is not set
-# CONFIG_SND_MIXART is not set
-# CONFIG_SND_NM256 is not set
-# CONFIG_SND_PCXHR is not set
-# CONFIG_SND_RME32 is not set
-# CONFIG_SND_RME96 is not set
-# CONFIG_SND_RME9652 is not set
-# CONFIG_SND_SONICVIBES is not set
-# CONFIG_SND_TRIDENT is not set
-# CONFIG_SND_VIA82XX is not set
-# CONFIG_SND_VIA82XX_MODEM is not set
-# CONFIG_SND_VX222 is not set
-# CONFIG_SND_YMFPCI is not set
-
-#
-# ALSA MIPS devices
-#
-# CONFIG_SND_AU1X00 is not set
-
-#
-# USB devices
-#
-CONFIG_SND_USB_AUDIO=m
-
-#
-# Open Sound System
-#
-# CONFIG_SOUND_PRIME is not set
+# CONFIG_SOUND is not set
 
 #
 # USB support
@@ -1232,20 +977,15 @@ CONFIG_USB_DEVICEFS=y
 #
 # USB Host Controller Drivers
 #
-CONFIG_USB_EHCI_HCD=m
-# CONFIG_USB_EHCI_SPLIT_ISO is not set
-# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
+# CONFIG_USB_EHCI_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
-CONFIG_USB_OHCI_HCD=m
-# CONFIG_USB_OHCI_BIG_ENDIAN is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-CONFIG_USB_UHCI_HCD=m
+# CONFIG_USB_OHCI_HCD is not set
+# CONFIG_USB_UHCI_HCD is not set
 # CONFIG_USB_SL811_HCD is not set
 
 #
 # USB Device Class drivers
 #
-# CONFIG_OBSOLETE_OSS_USB_DRIVER is not set
 CONFIG_USB_ACM=m
 CONFIG_USB_PRINTER=m
 
@@ -1258,15 +998,14 @@ CONFIG_USB_PRINTER=m
 #
 CONFIG_USB_STORAGE=m
 # CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
+CONFIG_USB_STORAGE_DATAFAB=y
+CONFIG_USB_STORAGE_FREECOM=y
+CONFIG_USB_STORAGE_DPCM=y
+CONFIG_USB_STORAGE_USBAT=y
+CONFIG_USB_STORAGE_SDDR09=y
+CONFIG_USB_STORAGE_SDDR55=y
+CONFIG_USB_STORAGE_JUMPSHOT=y
 # CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
 # CONFIG_USB_LIBUSUAL is not set
 
 #
@@ -1297,34 +1036,36 @@ CONFIG_USB_STORAGE=m
 #
 # USB Imaging devices
 #
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
+CONFIG_USB_MDC800=m
+CONFIG_USB_MICROTEK=m
 
 #
 # USB Multimedia devices
 #
-# CONFIG_USB_DABUSB is not set
-# CONFIG_USB_VICAM is not set
-# CONFIG_USB_DSBR is not set
-# CONFIG_USB_ET61X251 is not set
-# CONFIG_USB_IBMCAM is not set
-# CONFIG_USB_KONICAWC is not set
-# CONFIG_USB_OV511 is not set
-# CONFIG_USB_SE401 is not set
-# CONFIG_USB_SN9C102 is not set
-# CONFIG_USB_STV680 is not set
-# CONFIG_USB_PWC is not set
+CONFIG_USB_DABUSB=m
+
+#
+# Video4Linux support is needed for USB Multimedia device support
+#
 
 #
 # USB Network Adapters
 #
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_USB_ZD1201 is not set
-# CONFIG_USB_MON is not set
+CONFIG_USB_CATC=m
+CONFIG_USB_KAWETH=m
+CONFIG_USB_PEGASUS=m
+CONFIG_USB_RTL8150=m
+CONFIG_USB_USBNET=m
+CONFIG_USB_NET_AX8817X=m
+CONFIG_USB_NET_CDCETHER=m
+# CONFIG_USB_NET_GL620A is not set
+CONFIG_USB_NET_NET1080=m
+# CONFIG_USB_NET_PLUSB is not set
+# CONFIG_USB_NET_RNDIS_HOST is not set
+# CONFIG_USB_NET_CDC_SUBSET is not set
+CONFIG_USB_NET_ZAURUS=m
+CONFIG_USB_ZD1201=m
+CONFIG_USB_MON=y
 
 #
 # USB port drivers
@@ -1334,62 +1075,58 @@ CONFIG_USB_STORAGE=m
 # USB Serial Converter support
 #
 CONFIG_USB_SERIAL=m
-# CONFIG_USB_SERIAL_GENERIC is not set
-# CONFIG_USB_SERIAL_AIRPRIME is not set
+CONFIG_USB_SERIAL_GENERIC=y
+CONFIG_USB_SERIAL_AIRPRIME=m
 # CONFIG_USB_SERIAL_ANYDATA is not set
 CONFIG_USB_SERIAL_BELKIN=m
-# CONFIG_USB_SERIAL_WHITEHEAT is not set
-# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
-# CONFIG_USB_SERIAL_CP2101 is not set
-# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
-# CONFIG_USB_SERIAL_EMPEG is not set
+CONFIG_USB_SERIAL_WHITEHEAT=m
+CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
+CONFIG_USB_SERIAL_CP2101=m
+CONFIG_USB_SERIAL_CYPRESS_M8=m
+CONFIG_USB_SERIAL_EMPEG=m
 CONFIG_USB_SERIAL_FTDI_SIO=m
 CONFIG_USB_SERIAL_VISOR=m
-# CONFIG_USB_SERIAL_IPAQ is not set
-# CONFIG_USB_SERIAL_IR is not set
-# CONFIG_USB_SERIAL_EDGEPORT is not set
-# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
-# CONFIG_USB_SERIAL_GARMIN is not set
-# CONFIG_USB_SERIAL_IPW is not set
-# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
+CONFIG_USB_SERIAL_IPAQ=m
+CONFIG_USB_SERIAL_IR=m
+CONFIG_USB_SERIAL_EDGEPORT=m
+CONFIG_USB_SERIAL_EDGEPORT_TI=m
+CONFIG_USB_SERIAL_GARMIN=m
+CONFIG_USB_SERIAL_IPW=m
+CONFIG_USB_SERIAL_KEYSPAN_PDA=m
 # CONFIG_USB_SERIAL_KEYSPAN is not set
-# CONFIG_USB_SERIAL_KLSI is not set
-# CONFIG_USB_SERIAL_KOBIL_SCT is not set
-# CONFIG_USB_SERIAL_MCT_U232 is not set
+CONFIG_USB_SERIAL_KLSI=m
+CONFIG_USB_SERIAL_KOBIL_SCT=m
+CONFIG_USB_SERIAL_MCT_U232=m
 CONFIG_USB_SERIAL_PL2303=m
-# CONFIG_USB_SERIAL_HP4X is not set
-# CONFIG_USB_SERIAL_SAFE is not set
-# CONFIG_USB_SERIAL_TI is not set
-# CONFIG_USB_SERIAL_CYBERJACK is not set
-# CONFIG_USB_SERIAL_XIRCOM is not set
-# CONFIG_USB_SERIAL_OMNINET is not set
+CONFIG_USB_SERIAL_HP4X=m
+CONFIG_USB_SERIAL_SAFE=m
+CONFIG_USB_SERIAL_SAFE_PADDED=y
+CONFIG_USB_SERIAL_TI=m
+CONFIG_USB_SERIAL_CYBERJACK=m
+CONFIG_USB_SERIAL_XIRCOM=m
+CONFIG_USB_SERIAL_OMNINET=m
+CONFIG_USB_EZUSB=y
 
 #
 # USB Miscellaneous drivers
 #
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGETKIT is not set
-# CONFIG_USB_PHIDGETSERVO is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TEST is not set
+CONFIG_USB_EMI62=m
+CONFIG_USB_EMI26=m
+CONFIG_USB_AUERSWALD=m
+CONFIG_USB_RIO500=m
+CONFIG_USB_LEGOTOWER=m
+CONFIG_USB_LCD=m
+CONFIG_USB_LED=m
+CONFIG_USB_CYTHERM=m
+CONFIG_USB_PHIDGETKIT=m
+CONFIG_USB_PHIDGETSERVO=m
+CONFIG_USB_IDMOUSE=m
+CONFIG_USB_LD=m
+CONFIG_USB_TEST=m
 
 #
 # USB DSL modem support
 #
-CONFIG_USB_ATM=m
-CONFIG_USB_SPEEDTOUCH=m
-# CONFIG_USB_CXACRU is not set
-CONFIG_USB_UEAGLEATM=m
-# CONFIG_USB_XUSBATM is not set
 
 #
 # USB Gadget Support
@@ -1413,34 +1150,26 @@ CONFIG_USB_UEAGLEATM=m
 #
 # File systems
 #
-CONFIG_EXT2_FS=m
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT2_FS is not set
 CONFIG_EXT3_FS=m
 # CONFIG_EXT3_FS_XATTR is not set
 CONFIG_JBD=m
 # CONFIG_JBD_DEBUG is not set
-CONFIG_REISERFS_FS=m
-# CONFIG_REISERFS_CHECK is not set
-# CONFIG_REISERFS_PROC_INFO is not set
-# CONFIG_REISERFS_FS_XATTR is not set
-CONFIG_JFS_FS=m
-# CONFIG_JFS_POSIX_ACL is not set
-# CONFIG_JFS_SECURITY is not set
-# CONFIG_JFS_DEBUG is not set
-# CONFIG_JFS_STATISTICS is not set
-# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
 CONFIG_XFS_FS=m
+CONFIG_XFS_EXPORT=y
 # CONFIG_XFS_QUOTA is not set
 # CONFIG_XFS_SECURITY is not set
 # CONFIG_XFS_POSIX_ACL is not set
 # CONFIG_XFS_RT is not set
 # CONFIG_OCFS2_FS is not set
-CONFIG_MINIX_FS=m
-# CONFIG_ROMFS_FS is not set
+# CONFIG_MINIX_FS is not set
+CONFIG_ROMFS_FS=m
 CONFIG_INOTIFY=y
 # CONFIG_QUOTA is not set
-# CONFIG_DNOTIFY is not set
+CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
@@ -1455,26 +1184,28 @@ CONFIG_INOTIFY=y
 # DOS/FAT/NT Filesystems
 #
 CONFIG_FAT_FS=m
-# CONFIG_MSDOS_FS is not set
+CONFIG_MSDOS_FS=m
 CONFIG_VFAT_FS=m
 CONFIG_FAT_DEFAULT_CODEPAGE=437
 CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
+CONFIG_NTFS_FS=m
+# CONFIG_NTFS_DEBUG is not set
+CONFIG_NTFS_RW=y
 
 #
 # Pseudo filesystems
 #
 CONFIG_PROC_FS=y
-# CONFIG_PROC_KCORE is not set
+CONFIG_PROC_KCORE=y
 CONFIG_DEVFS_FS=y
 CONFIG_DEVFS_MOUNT=y
-# CONFIG_DEVFS_DEBUG is not set
+CONFIG_DEVFS_DEBUG=y
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
 # CONFIG_RELAYFS_FS is not set
-# CONFIG_CONFIGFS_FS is not set
+CONFIG_CONFIGFS_FS=y
 
 #
 # Miscellaneous filesystems
@@ -1490,15 +1221,12 @@ CONFIG_RAMFS=y
 CONFIG_JFFS2_FS=y
 CONFIG_JFFS2_FS_DEBUG=0
 CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_SUMMARY is not set
-CONFIG_JFFS2_COMPRESSION_OPTIONS=y
+CONFIG_JFFS2_SUMMARY=y
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
 CONFIG_JFFS2_ZLIB=y
 CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
-# CONFIG_JFFS2_CMODE_NONE is not set
-CONFIG_JFFS2_CMODE_PRIORITY=y
-# CONFIG_JFFS2_CMODE_SIZE is not set
-# CONFIG_CRAMFS is not set
+CONFIG_CRAMFS=m
 CONFIG_SQUASHFS=y
 # CONFIG_SQUASHFS_EMBEDDED is not set
 CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
@@ -1512,24 +1240,32 @@ CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
 #
 # Network File Systems
 #
-CONFIG_NFS_FS=m
+CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
 # CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=m
+CONFIG_NFSD=y
+CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
+CONFIG_NFSD_V4=y
+CONFIG_NFSD_TCP=y
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=y
 CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=m
-CONFIG_SUNRPC_GSS=m
-CONFIG_RPCSEC_GSS_KRB5=m
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
 # CONFIG_SMB_NLS_DEFAULT is not set
 CONFIG_CIFS=m
-# CONFIG_CIFS_STATS is not set
-# CONFIG_CIFS_XATTR is not set
+CONFIG_CIFS_STATS=y
+# CONFIG_CIFS_STATS2 is not set
+CONFIG_CIFS_XATTR=y
+CONFIG_CIFS_POSIX=y
 # CONFIG_CIFS_EXPERIMENTAL is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
@@ -1539,28 +1275,13 @@ CONFIG_CIFS=m
 #
 # Partition Types
 #
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-CONFIG_MAC_PARTITION=y
+# CONFIG_PARTITION_ADVANCED is not set
 CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
 
 #
 # Native Language Support
 #
-CONFIG_NLS=m
+CONFIG_NLS=y
 CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=m
 # CONFIG_NLS_CODEPAGE_737 is not set
@@ -1610,11 +1331,11 @@ CONFIG_NLS_UTF8=m
 # Kernel hacking
 #
 # CONFIG_PRINTK_TIME is not set
-# CONFIG_MAGIC_SYSRQ is not set
+CONFIG_MAGIC_SYSRQ=y
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_CROSSCOMPILE=y
-CONFIG_CMDLINE="root=/dev/mtdblock2 rootfstype=squashfs,jffs2 init=/etc/preinit noinitrd console=ttyS0,115200"
+CONFIG_CMDLINE=""
 
 #
 # Security options
@@ -1627,29 +1348,29 @@ CONFIG_CMDLINE="root=/dev/mtdblock2 rootfstype=squashfs,jffs2 init=/etc/preinit
 #
 CONFIG_CRYPTO=y
 CONFIG_CRYPTO_HMAC=y
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=m
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_MD5=y
 CONFIG_CRYPTO_SHA1=m
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-CONFIG_CRYPTO_DES=m
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
+CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_SERPENT=m
 CONFIG_CRYPTO_AES=m
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
+CONFIG_CRYPTO_TEA=m
 CONFIG_CRYPTO_ARC4=m
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
+CONFIG_CRYPTO_KHAZAD=m
+CONFIG_CRYPTO_ANUBIS=m
 CONFIG_CRYPTO_DEFLATE=m
 CONFIG_CRYPTO_MICHAEL_MIC=m
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_TEST is not set
+CONFIG_CRYPTO_CRC32C=m
+CONFIG_CRYPTO_TEST=m
 
 #
 # Hardware crypto devices
@@ -1659,8 +1380,12 @@ CONFIG_CRYPTO_MICHAEL_MIC=m
 # Library routines
 #
 CONFIG_CRC_CCITT=m
-CONFIG_CRC16=m
+CONFIG_CRC16=y
 CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
+CONFIG_LIBCRC32C=m
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_TEXTSEARCH_BM=m
+CONFIG_TEXTSEARCH_FSM=m
diff --git a/openwrt/target/linux/au1000-2.6/patches/002-mtx1_flash_map.patch b/openwrt/target/linux/au1000-2.6/patches/002-mtx1_flash_map.patch
new file mode 100644
index 0000000000..9a6b05b146
--- /dev/null
+++ b/openwrt/target/linux/au1000-2.6/patches/002-mtx1_flash_map.patch
@@ -0,0 +1,16 @@
+diff -urN linux-2.6.16.7/drivers/mtd/maps/alchemy-flash.c linux-2.6.16.7.new/drivers/mtd/maps/alchemy-flash.c
+--- linux-2.6.16.7/drivers/mtd/maps/alchemy-flash.c	2006-04-17 23:53:25.000000000 +0200
++++ linux-2.6.16.7.new/drivers/mtd/maps/alchemy-flash.c	2006-04-20 19:16:26.000000000 +0200
+@@ -105,6 +105,12 @@
+ #define USE_LOCAL_ACCESSORS /* why? */
+ #endif
+ 
++#ifdef CONFIG_MIPS_MTX1
++#define BOARD_MAP_NAME "MTX-1 Flash"
++#define BOARD_FLASH_SIZE 0x04000000 /* 64MB */
++#define BOARD_FLASH_WIDTH 4 /* 32-bits */
++#endif
++
+ static struct map_info alchemy_map = {
+ 	.name =	BOARD_MAP_NAME,
+ };
diff --git a/openwrt/target/linux/au1000-2.6/patches/003-zImage.patch b/openwrt/target/linux/au1000-2.6/patches/003-zImage.patch
new file mode 100644
index 0000000000..6c2230f8c9
--- /dev/null
+++ b/openwrt/target/linux/au1000-2.6/patches/003-zImage.patch
@@ -0,0 +1,2272 @@
+diff -urN linux-2.6.16.7/arch/mips/Makefile linux-2.6.16.7.new/arch/mips/Makefile
+--- linux-2.6.16.7/arch/mips/Makefile	2006-04-17 23:53:25.000000000 +0200
++++ linux-2.6.16.7.new/arch/mips/Makefile	2006-04-20 19:27:22.000000000 +0200
+@@ -840,6 +840,12 @@
+ vmlinux.srec: $(vmlinux-32)
+ 	+@$(call makeboot,$@)
+ 
++zImage: vmlinux
++	+@$(call makeboot,$@)
++
++zImage.flash: vmlinux
++	+@$(call makeboot,$@)
++
+ CLEAN_FILES += vmlinux.ecoff \
+ 	       vmlinux.srec \
+ 	       vmlinux.rm200.tmp \
+@@ -848,6 +854,7 @@
+ archclean:
+ 	@$(MAKE) $(clean)=arch/mips/boot
+ 	@$(MAKE) $(clean)=arch/mips/lasat
++	@$(MAKE) $(clean)=arch/mips/boot/compressed
+ 
+ CLEAN_FILES += vmlinux.32 \
+ 	       vmlinux.64 \
+diff -urN linux-2.6.16.7/arch/mips/Makefile.orig linux-2.6.16.7.new/arch/mips/Makefile.orig
+--- linux-2.6.16.7/arch/mips/Makefile.orig	1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.16.7.new/arch/mips/Makefile.orig	2006-04-20 19:27:12.000000000 +0200
+@@ -0,0 +1,858 @@
++#
++# This file is subject to the terms and conditions of the GNU General Public
++# License.  See the file "COPYING" in the main directory of this archive
++# for more details.
++#
++# Copyright (C) 1994, 95, 96, 2003 by Ralf Baechle
++# DECStation modifications by Paul M. Antoine, 1996
++# Copyright (C) 2002, 2003, 2004  Maciej W. Rozycki
++#
++# This file is included by the global makefile so that you can add your own
++# architecture-specific flags and dependencies. Remember to do have actions
++# for "archclean" cleaning up for this architecture.
++#
++
++as-option = $(shell if $(CC) $(CFLAGS) $(1) -Wa,-Z -c -o /dev/null \
++	     -xassembler /dev/null > /dev/null 2>&1; then echo "$(1)"; \
++	     else echo "$(2)"; fi ;)
++
++cflags-y :=
++
++#
++# Select the object file format to substitute into the linker script.
++#
++ifdef CONFIG_CPU_LITTLE_ENDIAN
++32bit-tool-prefix	= mipsel-linux-
++64bit-tool-prefix	= mips64el-linux-
++32bit-bfd		= elf32-tradlittlemips
++64bit-bfd		= elf64-tradlittlemips
++32bit-emul		= elf32ltsmip
++64bit-emul		= elf64ltsmip
++else
++32bit-tool-prefix	= mips-linux-
++64bit-tool-prefix	= mips64-linux-
++32bit-bfd		= elf32-tradbigmips
++64bit-bfd		= elf64-tradbigmips
++32bit-emul		= elf32btsmip
++64bit-emul		= elf64btsmip
++endif
++
++ifdef CONFIG_32BIT
++gcc-abi			= 32
++tool-prefix		= $(32bit-tool-prefix)
++UTS_MACHINE		:= mips
++endif
++ifdef CONFIG_64BIT
++gcc-abi			= 64
++tool-prefix		= $(64bit-tool-prefix)
++UTS_MACHINE		:= mips64
++endif
++
++ifdef CONFIG_CROSSCOMPILE
++CROSS_COMPILE		:= $(tool-prefix)
++endif
++
++CHECKFLAGS-y				+= -D__linux__ -D__mips__ \
++					   -D_MIPS_SZINT=32 \
++					   -D_ABIO32=1 \
++					   -D_ABIN32=2 \
++					   -D_ABI64=3
++CHECKFLAGS-$(CONFIG_32BIT)		+= -D_MIPS_SIM=_ABIO32 \
++					   -D_MIPS_SZLONG=32 \
++					   -D_MIPS_SZPTR=32 \
++					   -D__PTRDIFF_TYPE__=int
++CHECKFLAGS-$(CONFIG_64BIT)		+= -m64 -D_MIPS_SIM=_ABI64 \
++					   -D_MIPS_SZLONG=64 \
++					   -D_MIPS_SZPTR=64 \
++					   -D__PTRDIFF_TYPE__="long int"
++CHECKFLAGS-$(CONFIG_CPU_BIG_ENDIAN)	+= -D__MIPSEB__
++CHECKFLAGS-$(CONFIG_CPU_LITTLE_ENDIAN)	+= -D__MIPSEL__
++
++CHECKFLAGS				= $(CHECKFLAGS-y)
++
++ifdef CONFIG_BUILD_ELF64
++gas-abi			= 64
++ld-emul			= $(64bit-emul)
++vmlinux-32		= vmlinux.32
++vmlinux-64		= vmlinux
++else
++gas-abi			= 32
++ld-emul			= $(32bit-emul)
++vmlinux-32		= vmlinux
++vmlinux-64		= vmlinux.64
++
++cflags-$(CONFIG_64BIT)	+= $(call cc-option,-mno-explicit-relocs)
++endif
++
++#
++# GCC uses -G 0 -mabicalls -fpic as default.  We don't want PIC in the kernel
++# code since it only slows down the whole thing.  At some point we might make
++# use of global pointer optimizations but their use of $28 conflicts with
++# the current pointer optimization.
++#
++# The DECStation requires an ECOFF kernel for remote booting, other MIPS
++# machines may also.  Since BFD is incredibly buggy with respect to
++# crossformat linking we rely on the elf2ecoff tool for format conversion.
++#
++cflags-y			+= -G 0 -mno-abicalls -fno-pic -pipe
++cflags-y			+= -msoft-float
++LDFLAGS_vmlinux			+= -G 0 -static -n -nostdlib
++MODFLAGS			+= -mlong-calls
++
++#
++# We explicitly add the endianness specifier if needed, this allows
++# to compile kernels with a toolchain for the other endianness. We
++# carefully avoid to add it redundantly because gcc 3.3/3.4 complains
++# when fed the toolchain default!
++#
++cflags-$(CONFIG_CPU_BIG_ENDIAN)		+= $(shell $(CC) -dumpmachine |grep -q 'mips.*el-.*' && echo -EB)
++cflags-$(CONFIG_CPU_LITTLE_ENDIAN)	+= $(shell $(CC) -dumpmachine |grep -q 'mips.*el-.*' || echo -EL)
++
++cflags-$(CONFIG_SB1XXX_CORELIS)	+= $(call cc-option,-mno-sched-prolog) \
++				   -fno-omit-frame-pointer
++
++#
++# Use: $(call set_gccflags,<cpu0>,<isa0>,<cpu1>,<isa1>,<isa2>)
++#
++# <cpu0>,<isa0> -- preferred CPU and ISA designations (may require
++#                  recent tools)
++# <cpu1>,<isa1> -- fallback CPU and ISA designations (have to work
++#                  with up to the oldest supported tools)
++# <isa2>        -- an ISA designation used as an ABI selector for
++#                  gcc versions that do not support "-mabi=32"
++#                  (depending on the CPU type, either "mips1" or
++#                  "mips2")
++#
++set_gccflags = $(shell \
++while :; do \
++	cpu=$(1); isa=-$(2); \
++	for gcc_opt in -march= -mcpu=; do \
++		$(CC) $$gcc_opt$$cpu $$isa -S -o /dev/null \
++			-xc /dev/null > /dev/null 2>&1 && \
++			break 2; \
++	done; \
++	cpu=$(3); isa=-$(4); \
++	for gcc_opt in -march= -mcpu=; do \
++		$(CC) $$gcc_opt$$cpu $$isa -S -o /dev/null \
++			-xc /dev/null > /dev/null 2>&1 && \
++			break 2; \
++	done; \
++	break; \
++done; \
++gcc_abi=-mabi=$(gcc-abi); gcc_cpu=$$cpu; \
++if $(CC) $$gcc_abi -S -o /dev/null -xc /dev/null > /dev/null 2>&1; then \
++	gcc_isa=$$isa; \
++else \
++	gcc_abi=; gcc_isa=-$(5); \
++fi; \
++gas_abi=-Wa,-$(gcc-abi); gas_cpu=$$cpu; gas_isa=-Wa,$$isa; \
++while :; do \
++	for gas_opt in -Wa,-march= -Wa,-mcpu=; do \
++		$(CC) $$gas_abi $$gas_opt$$cpu $$gas_isa -Wa,-Z -c \
++			-o /dev/null -xassembler /dev/null > /dev/null 2>&1 && \
++			break 2; \
++	done; \
++	gas_abi=; gas_opt=; gas_cpu=; gas_isa=; \
++	break; \
++done; \
++if test "$(gcc-abi)" != "$(gas-abi)"; then \
++	gas_abi="-Wa,-$(gas-abi) -Wa,-mgp$(gcc-abi)"; \
++fi; \
++if test "$$gcc_opt" = -march= && test -n "$$gcc_abi"; then \
++	$(CC) $$gcc_abi $$gcc_opt$$gcc_cpu -S -o /dev/null \
++		-xc /dev/null > /dev/null 2>&1 && \
++		gcc_isa=; \
++fi; \
++echo $$gcc_abi $$gcc_opt$$gcc_cpu $$gcc_isa $$gas_abi $$gas_opt$$gas_cpu $$gas_isa)
++
++#
++# CPU-dependent compiler/assembler options for optimization.
++#
++cflags-$(CONFIG_CPU_R3000)	+= \
++			$(call set_gccflags,r3000,mips1,r3000,mips1,mips1)
++CHECKFLAGS-$(CONFIG_CPU_R3000)	+= -D_MIPS_ISA=_MIPS_ISA_MIPS1
++
++cflags-$(CONFIG_CPU_TX39XX)	+= \
++			$(call set_gccflags,r3900,mips1,r3000,mips1,mips1)
++CHECKFLAGS-$(CONFIG_CPU_TX39XX)	+= -D_MIPS_ISA=_MIPS_ISA_MIPS1
++
++cflags-$(CONFIG_CPU_R6000)	+= \
++			$(call set_gccflags,r6000,mips2,r6000,mips2,mips2) \
++			-Wa,--trap
++CHECKFLAGS-$(CONFIG_CPU_R6000)	+= -D_MIPS_ISA=_MIPS_ISA_MIPS2
++
++cflags-$(CONFIG_CPU_R4300)	+= \
++			$(call set_gccflags,r4300,mips3,r4300,mips3,mips2) \
++			-Wa,--trap
++CHECKFLAGS-$(CONFIG_CPU_R4300)	+= -D_MIPS_ISA=_MIPS_ISA_MIPS3
++
++cflags-$(CONFIG_CPU_VR41XX)	+= \
++			$(call set_gccflags,r4100,mips3,r4600,mips3,mips2) \
++			-Wa,--trap
++CHECKFLAGS-$(CONFIG_CPU_VR41XX)	+= -D_MIPS_ISA=_MIPS_ISA_MIPS3
++
++cflags-$(CONFIG_CPU_R4X00)	+= \
++			$(call set_gccflags,r4600,mips3,r4600,mips3,mips2) \
++			-Wa,--trap
++CHECKFLAGS-$(CONFIG_CPU_R4X00)	+= -D_MIPS_ISA=_MIPS_ISA_MIPS3
++
++cflags-$(CONFIG_CPU_TX49XX)	+= \
++			$(call set_gccflags,r4600,mips3,r4600,mips3,mips2)  \
++			-Wa,--trap
++CHECKFLAGS-$(CONFIG_CPU_TX49XX)	+= -D_MIPS_ISA=_MIPS_ISA_MIPS3
++
++cflags-$(CONFIG_CPU_MIPS32_R1)	+= \
++			$(call set_gccflags,mips32,mips32,r4600,mips3,mips2) \
++			-Wa,--trap
++CHECKFLAGS-$(CONFIG_CPU_MIPS32_R1)	+= -D_MIPS_ISA=_MIPS_ISA_MIPS32
++
++cflags-$(CONFIG_CPU_MIPS32_R2)	+= \
++			$(call set_gccflags,mips32r2,mips32r2,r4600,mips3,mips2) \
++			-Wa,--trap
++CHECKFLAGS-$(CONFIG_CPU_MIPS32_R2)	+= -D_MIPS_ISA=_MIPS_ISA_MIPS32
++
++cflags-$(CONFIG_CPU_MIPS64_R1)	+= \
++			$(call set_gccflags,mips64,mips64,r4600,mips3,mips2) \
++			-Wa,--trap
++CHECKFLAGS-$(CONFIG_CPU_MIPS64_R1)	+= -D_MIPS_ISA=_MIPS_ISA_MIPS64
++
++cflags-$(CONFIG_CPU_MIPS64_R2)	+= \
++			$(call set_gccflags,mips64r2,mips64r2,r4600,mips3,mips2) \
++			-Wa,--trap
++CHECKFLAGS-$(CONFIG_CPU_MIPS64_R2)	+= -D_MIPS_ISA=_MIPS_ISA_MIPS64
++
++cflags-$(CONFIG_CPU_R5000)	+= \
++			$(call set_gccflags,r5000,mips4,r5000,mips4,mips2) \
++			-Wa,--trap
++CHECKFLAGS-$(CONFIG_CPU_R5000)	+= -D_MIPS_ISA=_MIPS_ISA_MIPS4
++
++cflags-$(CONFIG_CPU_R5432)	+= \
++			$(call set_gccflags,r5400,mips4,r5000,mips4,mips2) \
++			-Wa,--trap
++CHECKFLAGS-$(CONFIG_CPU_R5432)	+= -D_MIPS_ISA=_MIPS_ISA_MIPS4
++
++cflags-$(CONFIG_CPU_NEVADA)	+= \
++			$(call set_gccflags,rm5200,mips4,r5000,mips4,mips2) \
++			-Wa,--trap
++CHECKFLAGS-$(CONFIG_CPU_NEVADA)	+= -D_MIPS_ISA=_MIPS_ISA_MIPS4
++
++cflags-$(CONFIG_CPU_RM7000)	+= \
++			$(call set_gccflags,rm7000,mips4,r5000,mips4,mips2) \
++			-Wa,--trap
++CHECKFLAGS-$(CONFIG_CPU_RM7000)	+= -D_MIPS_ISA=_MIPS_ISA_MIPS4
++
++cflags-$(CONFIG_CPU_RM9000)	+= \
++			$(call set_gccflags,rm9000,mips4,r5000,mips4,mips2) \
++			-Wa,--trap
++CHECKFLAGS-$(CONFIG_CPU_RM9000)	+= -D_MIPS_ISA=_MIPS_ISA_MIPS4
++
++
++cflags-$(CONFIG_CPU_SB1)	+= \
++			$(call set_gccflags,sb1,mips64,r5000,mips4,mips2) \
++			-Wa,--trap
++CHECKFLAGS-$(CONFIG_CPU_SB1)	+= -D_MIPS_ISA=_MIPS_ISA_MIPS64
++
++cflags-$(CONFIG_CPU_R8000)	+= \
++			$(call set_gccflags,r8000,mips4,r8000,mips4,mips2) \
++			-Wa,--trap
++CHECKFLAGS-$(CONFIG_CPU_R8000)	+= -D_MIPS_ISA=_MIPS_ISA_MIPS4
++
++cflags-$(CONFIG_CPU_R10000)	+= \
++			$(call set_gccflags,r10000,mips4,r8000,mips4,mips2) \
++			-Wa,--trap
++CHECKFLAGS-$(CONFIG_CPU_R10000)	+= -D_MIPS_ISA=_MIPS_ISA_MIPS4
++
++ifdef CONFIG_CPU_SB1
++ifdef CONFIG_SB1_PASS_1_WORKAROUNDS
++MODFLAGS	+= -msb1-pass1-workarounds
++endif
++endif
++
++#
++# Firmware support
++#
++libs-$(CONFIG_ARC)		+= arch/mips/arc/
++libs-$(CONFIG_SIBYTE_CFE)	+= arch/mips/sibyte/cfe/
++
++#
++# Board-dependent options and extra files
++#
++
++#
++# Acer PICA 61, Mips Magnum 4000 and Olivetti M700.
++#
++core-$(CONFIG_MACH_JAZZ)	+= arch/mips/jazz/
++cflags-$(CONFIG_MACH_JAZZ)	+= -Iinclude/asm-mips/mach-jazz
++load-$(CONFIG_MACH_JAZZ)	+= 0xffffffff80080000
++
++#
++# Common Alchemy Au1x00 stuff
++#
++core-$(CONFIG_SOC_AU1X00)	+= arch/mips/au1000/common/
++cflags-$(CONFIG_SOC_AU1X00)	+= -Iinclude/asm-mips/mach-au1x00
++
++#
++# AMD Alchemy Pb1000 eval board
++#
++libs-$(CONFIG_MIPS_PB1000)	+= arch/mips/au1000/pb1000/
++cflags-$(CONFIG_MIPS_PB1000)	+= -Iinclude/asm-mips/mach-pb1x00
++load-$(CONFIG_MIPS_PB1000)	+= 0xffffffff80100000
++
++#
++# AMD Alchemy Pb1100 eval board
++#
++libs-$(CONFIG_MIPS_PB1100)	+= arch/mips/au1000/pb1100/
++cflags-$(CONFIG_MIPS_PB1100)	+= -Iinclude/asm-mips/mach-pb1x00
++load-$(CONFIG_MIPS_PB1100)	+= 0xffffffff80100000
++
++#
++# AMD Alchemy Pb1500 eval board
++#
++libs-$(CONFIG_MIPS_PB1500)	+= arch/mips/au1000/pb1500/
++cflags-$(CONFIG_MIPS_PB1500)	+= -Iinclude/asm-mips/mach-pb1x00
++load-$(CONFIG_MIPS_PB1500)	+= 0xffffffff80100000
++
++#
++# AMD Alchemy Pb1550 eval board
++#
++libs-$(CONFIG_MIPS_PB1550)	+= arch/mips/au1000/pb1550/
++cflags-$(CONFIG_MIPS_PB1550)	+= -Iinclude/asm-mips/mach-pb1x00
++load-$(CONFIG_MIPS_PB1550)	+= 0xffffffff80100000
++
++#
++# AMD Alchemy Pb1200 eval board
++#
++libs-$(CONFIG_MIPS_PB1200)	+= arch/mips/au1000/pb1200/
++cflags-$(CONFIG_MIPS_PB1200)	+= -Iinclude/asm-mips/mach-pb1x00
++load-$(CONFIG_MIPS_PB1200)	+= 0xffffffff80100000
++
++#
++# AMD Alchemy Db1000 eval board
++#
++libs-$(CONFIG_MIPS_DB1000)	+= arch/mips/au1000/db1x00/
++cflags-$(CONFIG_MIPS_DB1000)	+= -Iinclude/asm-mips/mach-db1x00
++load-$(CONFIG_MIPS_DB1000)	+= 0xffffffff80100000
++
++#
++# AMD Alchemy Db1100 eval board
++#
++libs-$(CONFIG_MIPS_DB1100)	+= arch/mips/au1000/db1x00/
++cflags-$(CONFIG_MIPS_DB1100)	+= -Iinclude/asm-mips/mach-db1x00
++load-$(CONFIG_MIPS_DB1100)	+= 0xffffffff80100000
++
++#
++# AMD Alchemy Db1500 eval board
++#
++libs-$(CONFIG_MIPS_DB1500)	+= arch/mips/au1000/db1x00/
++cflags-$(CONFIG_MIPS_DB1500)	+= -Iinclude/asm-mips/mach-db1x00
++load-$(CONFIG_MIPS_DB1500)	+= 0xffffffff80100000
++
++#
++# AMD Alchemy Db1550 eval board
++#
++libs-$(CONFIG_MIPS_DB1550)	+= arch/mips/au1000/db1x00/
++cflags-$(CONFIG_MIPS_DB1550)	+= -Iinclude/asm-mips/mach-db1x00
++load-$(CONFIG_MIPS_DB1550)	+= 0xffffffff80100000
++
++#
++# AMD Alchemy Db1200 eval board
++#
++libs-$(CONFIG_MIPS_DB1200)	+= arch/mips/au1000/pb1200/
++cflags-$(CONFIG_MIPS_DB1200)	+= -Iinclude/asm-mips/mach-db1x00
++load-$(CONFIG_MIPS_DB1200)	+= 0xffffffff80100000
++
++#
++# AMD Alchemy Bosporus eval board
++#
++libs-$(CONFIG_MIPS_BOSPORUS)	+= arch/mips/au1000/db1x00/
++cflags-$(CONFIG_MIPS_BOSPORUS)	+= -Iinclude/asm-mips/mach-db1x00
++load-$(CONFIG_MIPS_BOSPORUS)	+= 0xffffffff80100000
++
++#
++# AMD Alchemy Mirage eval board
++#
++libs-$(CONFIG_MIPS_MIRAGE)	+= arch/mips/au1000/db1x00/
++cflags-$(CONFIG_MIPS_MIRAGE)	+= -Iinclude/asm-mips/mach-db1x00
++load-$(CONFIG_MIPS_MIRAGE)	+= 0xffffffff80100000
++
++#
++# 4G-Systems eval board
++#
++libs-$(CONFIG_MIPS_MTX1)	+= arch/mips/au1000/mtx-1/
++load-$(CONFIG_MIPS_MTX1)	+= 0xffffffff80100000
++
++#
++# MyCable eval board
++#
++libs-$(CONFIG_MIPS_XXS1500)	+= arch/mips/au1000/xxs1500/
++load-$(CONFIG_MIPS_XXS1500)	+= 0xffffffff80100000
++
++#
++# Cobalt Server
++#
++core-$(CONFIG_MIPS_COBALT)	+= arch/mips/cobalt/
++cflags-$(CONFIG_MIPS_COBALT)	+= -Iinclude/asm-mips/mach-cobalt
++load-$(CONFIG_MIPS_COBALT)	+= 0xffffffff80080000
++
++#
++# DECstation family
++#
++core-$(CONFIG_MACH_DECSTATION)	+= arch/mips/dec/
++cflags-$(CONFIG_MACH_DECSTATION)+= -Iinclude/asm-mips/mach-dec
++libs-$(CONFIG_MACH_DECSTATION)	+= arch/mips/dec/prom/
++load-$(CONFIG_MACH_DECSTATION)	+= 0xffffffff80040000
++CLEAN_FILES			+= drivers/tc/lk201-map.c
++
++#
++# Galileo EV64120 Board
++#
++core-$(CONFIG_MIPS_EV64120)	+= arch/mips/gt64120/ev64120/
++core-$(CONFIG_MIPS_EV64120)	+= arch/mips/gt64120/common/
++cflags-$(CONFIG_MIPS_EV64120)	+= -Iinclude/asm-mips/mach-ev64120
++load-$(CONFIG_MIPS_EV64120)	+= 0xffffffff80100000
++
++#
++# Galileo EV96100 Board
++#
++core-$(CONFIG_MIPS_EV96100)	+= arch/mips/galileo-boards/ev96100/
++cflags-$(CONFIG_MIPS_EV96100)	+= -Iinclude/asm-mips/mach-ev96100
++load-$(CONFIG_MIPS_EV96100)	+= 0xffffffff80100000
++
++#
++# Globespan IVR eval board with QED 5231 CPU
++#
++core-$(CONFIG_ITE_BOARD_GEN)	+= arch/mips/ite-boards/generic/
++core-$(CONFIG_MIPS_IVR)		+= arch/mips/ite-boards/ivr/
++load-$(CONFIG_MIPS_IVR)		+= 0xffffffff80100000
++
++#
++# ITE 8172 eval board with QED 5231 CPU
++#
++core-$(CONFIG_MIPS_ITE8172)	+= arch/mips/ite-boards/qed-4n-s01b/
++load-$(CONFIG_MIPS_ITE8172)	+= 0xffffffff80100000
++
++#
++# For all MIPS, Inc. eval boards
++#
++core-$(CONFIG_MIPS_BOARDS_GEN)	+= arch/mips/mips-boards/generic/
++
++#
++# MIPS Atlas board
++#
++core-$(CONFIG_MIPS_ATLAS)	+= arch/mips/mips-boards/atlas/
++cflags-$(CONFIG_MIPS_ATLAS)	+= -Iinclude/asm-mips/mach-atlas
++cflags-$(CONFIG_MIPS_ATLAS)	+= -Iinclude/asm-mips/mach-mips
++load-$(CONFIG_MIPS_ATLAS)	+= 0xffffffff80100000
++
++#
++# MIPS Malta board
++#
++core-$(CONFIG_MIPS_MALTA)	+= arch/mips/mips-boards/malta/
++cflags-$(CONFIG_MIPS_MALTA)	+= -Iinclude/asm-mips/mach-mips
++load-$(CONFIG_MIPS_MALTA)	+= 0xffffffff80100000
++
++#
++# MIPS SEAD board
++#
++core-$(CONFIG_MIPS_SEAD)	+= arch/mips/mips-boards/sead/
++load-$(CONFIG_MIPS_SEAD)	+= 0xffffffff80100000
++
++#
++# MIPS SIM
++#
++core-$(CONFIG_MIPS_SIM)		+= arch/mips/mips-boards/sim/
++cflags-$(CONFIG_MIPS_SIM)	+= -Iinclude/asm-mips/mach-sim
++load-$(CONFIG_MIPS_SIM)		+= 0x80100000
++
++#
++# Momentum Ocelot board
++#
++# The Ocelot setup.o must be linked early - it does the ioremap() for the
++# mips_io_port_base.
++#
++core-$(CONFIG_MOMENCO_OCELOT)	+= arch/mips/gt64120/common/ \
++				   arch/mips/gt64120/momenco_ocelot/
++cflags-$(CONFIG_MOMENCO_OCELOT)	+= -Iinclude/asm-mips/mach-ocelot
++load-$(CONFIG_MOMENCO_OCELOT)	+= 0xffffffff80100000
++
++#
++# Momentum Ocelot-G board
++#
++# The Ocelot-G setup.o must be linked early - it does the ioremap() for the
++# mips_io_port_base.
++#
++core-$(CONFIG_MOMENCO_OCELOT_G)	+= arch/mips/momentum/ocelot_g/
++load-$(CONFIG_MOMENCO_OCELOT_G)	+= 0xffffffff80100000
++
++#
++# Momentum Ocelot-C and -CS boards
++#
++# The Ocelot-C[S] setup.o must be linked early - it does the ioremap() for the
++# mips_io_port_base.
++core-$(CONFIG_MOMENCO_OCELOT_C)	+= arch/mips/momentum/ocelot_c/
++load-$(CONFIG_MOMENCO_OCELOT_C)	+= 0xffffffff80100000
++
++#
++# PMC-Sierra Yosemite
++#
++core-$(CONFIG_PMC_YOSEMITE)	+= arch/mips/pmc-sierra/yosemite/
++cflags-$(CONFIG_PMC_YOSEMITE)	+= -Iinclude/asm-mips/mach-yosemite
++load-$(CONFIG_PMC_YOSEMITE)	+= 0xffffffff80100000
++
++# Qemu simulating MIPS32 4Kc
++#
++core-$(CONFIG_QEMU)		+= arch/mips/qemu/
++cflags-$(CONFIG_QEMU)		+= -Iinclude/asm-mips/mach-qemu
++load-$(CONFIG_QEMU)		+= 0xffffffff80010000
++
++#
++# Momentum Ocelot-3
++#
++core-$(CONFIG_MOMENCO_OCELOT_3) 	+= arch/mips/momentum/ocelot_3/
++cflags-$(CONFIG_MOMENCO_OCELOT_3)	+= -Iinclude/asm-mips/mach-ocelot3
++load-$(CONFIG_MOMENCO_OCELOT_3) 	+= 0xffffffff80100000
++
++#
++# Momentum Jaguar ATX
++#
++core-$(CONFIG_MOMENCO_JAGUAR_ATX)	+= arch/mips/momentum/jaguar_atx/
++cflags-$(CONFIG_MOMENCO_JAGUAR_ATX)	+= -Iinclude/asm-mips/mach-ja
++#ifdef CONFIG_JAGUAR_DMALOW
++#load-$(CONFIG_MOMENCO_JAGUAR_ATX)	+= 0xffffffff88000000
++#else
++load-$(CONFIG_MOMENCO_JAGUAR_ATX)	+= 0xffffffff80100000
++#endif
++
++#
++# NEC DDB
++#
++core-$(CONFIG_DDB5XXX_COMMON)	+= arch/mips/ddb5xxx/common/
++
++#
++# NEC DDB Vrc-5074
++#
++core-$(CONFIG_DDB5074)		+= arch/mips/ddb5xxx/ddb5074/
++load-$(CONFIG_DDB5074)		+= 0xffffffff80080000
++
++#
++# NEC DDB Vrc-5476
++#
++core-$(CONFIG_DDB5476)		+= arch/mips/ddb5xxx/ddb5476/
++load-$(CONFIG_DDB5476)		+= 0xffffffff80080000
++
++#
++# NEC DDB Vrc-5477
++#
++core-$(CONFIG_DDB5477)		+= arch/mips/ddb5xxx/ddb5477/
++load-$(CONFIG_DDB5477)		+= 0xffffffff80100000
++
++core-$(CONFIG_LASAT)		+= arch/mips/lasat/
++cflags-$(CONFIG_LASAT)		+= -Iinclude/asm-mips/mach-lasat
++load-$(CONFIG_LASAT)		+= 0xffffffff80000000
++
++#
++# Common VR41xx
++#
++core-$(CONFIG_MACH_VR41XX)	+= arch/mips/vr41xx/common/
++cflags-$(CONFIG_MACH_VR41XX)	+= -Iinclude/asm-mips/mach-vr41xx
++
++#
++# NEC VR4133
++#
++core-$(CONFIG_NEC_CMBVR4133)	+= arch/mips/vr41xx/nec-cmbvr4133/
++load-$(CONFIG_NEC_CMBVR4133)	+= 0xffffffff80100000
++
++#
++# ZAO Networks Capcella (VR4131)
++#
++load-$(CONFIG_ZAO_CAPCELLA)	+= 0xffffffff80000000
++
++#
++# Victor MP-C303/304 (VR4122)
++#
++load-$(CONFIG_VICTOR_MPC30X)	+= 0xffffffff80001000
++
++#
++# IBM WorkPad z50 (VR4121)
++#
++core-$(CONFIG_IBM_WORKPAD)	+= arch/mips/vr41xx/ibm-workpad/
++load-$(CONFIG_IBM_WORKPAD)	+= 0xffffffff80004000
++
++#
++# CASIO CASSIPEIA E-55/65 (VR4111)
++#
++core-$(CONFIG_CASIO_E55)	+= arch/mips/vr41xx/casio-e55/
++load-$(CONFIG_CASIO_E55)	+= 0xffffffff80004000
++
++#
++# TANBAC VR4131 multichip module(TB0225) and TANBAC VR4131DIMM(TB0229) (VR4131)
++#
++load-$(CONFIG_TANBAC_TB022X)	+= 0xffffffff80000000
++
++#
++# Common Philips PNX8550
++#
++core-$(CONFIG_SOC_PNX8550)	+= arch/mips/philips/pnx8550/common/
++cflags-$(CONFIG_SOC_PNX8550)	+= -Iinclude/asm-mips/mach-pnx8550
++
++#
++# Philips PNX8550 JBS board
++#
++libs-$(CONFIG_PNX8550_JBS)	+= arch/mips/philips/pnx8550/jbs/
++#cflags-$(CONFIG_PNX8550_JBS)	+= -Iinclude/asm-mips/mach-pnx8550
++load-$(CONFIG_PNX8550_JBS)	+= 0xffffffff80060000
++
++#
++# SGI IP22 (Indy/Indigo2)
++#
++# Set the load address to >= 0xffffffff88069000 if you want to leave space for
++# symmon, 0xffffffff80002000 for production kernels.  Note that the value must
++# be aligned to a multiple of the kernel stack size or the handling of the
++# current variable will break so for 64-bit kernels we have to raise the start
++# address by 8kb.
++#
++core-$(CONFIG_SGI_IP22)		+= arch/mips/sgi-ip22/
++cflags-$(CONFIG_SGI_IP22)	+= -Iinclude/asm-mips/mach-ip22
++ifdef CONFIG_32BIT
++load-$(CONFIG_SGI_IP22)		+= 0xffffffff88002000
++endif
++ifdef CONFIG_64BIT
++load-$(CONFIG_SGI_IP22)		+= 0xffffffff88004000
++endif
++
++#
++# SGI-IP27 (Origin200/2000)
++#
++# Set the load address to >= 0xc000000000300000 if you want to leave space for
++# symmon, 0xc00000000001c000 for production kernels.  Note that the value must
++# be 16kb aligned or the handling of the current variable will break.
++#
++ifdef CONFIG_SGI_IP27
++core-$(CONFIG_SGI_IP27)		+= arch/mips/sgi-ip27/
++cflags-$(CONFIG_SGI_IP27)	+= -Iinclude/asm-mips/mach-ip27
++ifdef CONFIG_BUILD_ELF64
++ifdef CONFIG_MAPPED_KERNEL
++load-$(CONFIG_SGI_IP27)		+= 0xc00000004001c000
++OBJCOPYFLAGS			:= --change-addresses=0x3fffffff80000000
++dataoffset-$(CONFIG_SGI_IP27)	+= 0x01000000
++else
++load-$(CONFIG_SGI_IP27)		+= 0xa80000000001c000
++OBJCOPYFLAGS			:= --change-addresses=0x57ffffff80000000
++endif
++else
++ifdef CONFIG_MAPPED_KERNEL
++load-$(CONFIG_SGI_IP27)		+= 0xffffffffc001c000
++OBJCOPYFLAGS			:= --change-addresses=0xc000000080000000
++dataoffset-$(CONFIG_SGI_IP27)	+= 0x01000000
++else
++load-$(CONFIG_SGI_IP27)		+= 0xffffffff8001c000
++OBJCOPYFLAGS			:= --change-addresses=0xa800000080000000
++endif
++endif
++endif
++
++#
++# SGI-IP32 (O2)
++#
++# Set the load address to >= 80069000 if you want to leave space for symmon,
++# 0xffffffff80004000 for production kernels.  Note that the value must be aligned to
++# a multiple of the kernel stack size or the handling of the current variable
++# will break.
++#
++core-$(CONFIG_SGI_IP32)		+= arch/mips/sgi-ip32/
++cflags-$(CONFIG_SGI_IP32)	+= -Iinclude/asm-mips/mach-ip32
++load-$(CONFIG_SGI_IP32)		+= 0xffffffff80004000
++
++#
++# Sibyte SB1250 SOC
++#
++# This is a LIB so that it links at the end, and initcalls are later
++# the sequence; but it is built as an object so that modules don't get
++# removed (as happens, even if they have __initcall/module_init)
++#
++core-$(CONFIG_SIBYTE_BCM112X)	+= arch/mips/sibyte/sb1250/
++cflags-$(CONFIG_SIBYTE_BCM112X)	+= -Iinclude/asm-mips/mach-sibyte \
++			-DSIBYTE_HDR_FEATURES=SIBYTE_HDR_FMASK_1250_112x_ALL
++
++core-$(CONFIG_SIBYTE_SB1250)	+= arch/mips/sibyte/sb1250/
++cflags-$(CONFIG_SIBYTE_SB1250)	+= -Iinclude/asm-mips/mach-sibyte \
++			-DSIBYTE_HDR_FEATURES=SIBYTE_HDR_FMASK_1250_112x_ALL
++
++core-$(CONFIG_SIBYTE_BCM1x55)	+= arch/mips/sibyte/bcm1480/
++cflags-$(CONFIG_SIBYTE_BCM1x55)	+= -Iinclude/asm-mips/mach-sibyte \
++			-DSIBYTE_HDR_FEATURES=SIBYTE_HDR_FMASK_1480_ALL
++
++core-$(CONFIG_SIBYTE_BCM1x80)	+= arch/mips/sibyte/bcm1480/
++cflags-$(CONFIG_SIBYTE_BCM1x80)	+= -Iinclude/asm-mips/mach-sibyte \
++			-DSIBYTE_HDR_FEATURES=SIBYTE_HDR_FMASK_1480_ALL
++
++#
++# Sibyte BCM91120x (Carmel) board
++# Sibyte BCM91120C (CRhine) board
++# Sibyte BCM91125C (CRhone) board
++# Sibyte BCM91125E (Rhone) board
++# Sibyte SWARM board
++# Sibyte BCM91x80 (BigSur) board
++#
++libs-$(CONFIG_SIBYTE_CARMEL)	+= arch/mips/sibyte/swarm/
++load-$(CONFIG_SIBYTE_CARMEL)	:= 0xffffffff80100000
++libs-$(CONFIG_SIBYTE_CRHINE)	+= arch/mips/sibyte/swarm/
++load-$(CONFIG_SIBYTE_CRHINE)	:= 0xffffffff80100000
++libs-$(CONFIG_SIBYTE_CRHONE)	+= arch/mips/sibyte/swarm/
++load-$(CONFIG_SIBYTE_CRHONE)	:= 0xffffffff80100000
++libs-$(CONFIG_SIBYTE_RHONE)	+= arch/mips/sibyte/swarm/
++load-$(CONFIG_SIBYTE_RHONE)	:= 0xffffffff80100000
++libs-$(CONFIG_SIBYTE_SENTOSA)	+= arch/mips/sibyte/swarm/
++load-$(CONFIG_SIBYTE_SENTOSA)	:= 0xffffffff80100000
++libs-$(CONFIG_SIBYTE_SWARM)	+= arch/mips/sibyte/swarm/
++load-$(CONFIG_SIBYTE_SWARM)	:= 0xffffffff80100000
++libs-$(CONFIG_SIBYTE_BIGSUR)	+= arch/mips/sibyte/swarm/
++load-$(CONFIG_SIBYTE_BIGSUR)	:= 0xffffffff80100000
++
++#
++# SNI RM200 PCI
++#
++core-$(CONFIG_SNI_RM200_PCI)	+= arch/mips/sni/
++cflags-$(CONFIG_SNI_RM200_PCI)	+= -Iinclude/asm-mips/mach-rm200
++load-$(CONFIG_SNI_RM200_PCI)	+= 0xffffffff80600000
++
++#
++# Toshiba JMR-TX3927 board
++#
++core-$(CONFIG_TOSHIBA_JMR3927)	+= arch/mips/jmr3927/rbhma3100/ \
++				   arch/mips/jmr3927/common/
++cflags-$(CONFIG_TOSHIBA_JMR3927) += -Iinclude/asm-mips/mach-jmr3927
++load-$(CONFIG_TOSHIBA_JMR3927)	+= 0xffffffff80050000
++
++#
++# Toshiba RBTX4927 board or
++# Toshiba RBTX4937 board
++#
++core-$(CONFIG_TOSHIBA_RBTX4927)	+= arch/mips/tx4927/toshiba_rbtx4927/
++core-$(CONFIG_TOSHIBA_RBTX4927)	+= arch/mips/tx4927/common/
++load-$(CONFIG_TOSHIBA_RBTX4927)	+= 0xffffffff80020000
++
++#
++# Toshiba RBTX4938 board
++#
++core-$(CONFIG_TOSHIBA_RBTX4938) += arch/mips/tx4938/toshiba_rbtx4938/
++core-$(CONFIG_TOSHIBA_RBTX4938) += arch/mips/tx4938/common/
++load-$(CONFIG_TOSHIBA_RBTX4938) += 0xffffffff80100000
++
++cflags-y			+= -Iinclude/asm-mips/mach-generic
++drivers-$(CONFIG_PCI)		+= arch/mips/pci/
++
++ifdef CONFIG_32BIT
++ifdef CONFIG_CPU_LITTLE_ENDIAN
++JIFFIES			= jiffies_64
++else
++JIFFIES			= jiffies_64 + 4
++endif
++else
++JIFFIES			= jiffies_64
++endif
++
++AFLAGS		+= $(cflags-y)
++CFLAGS		+= $(cflags-y)
++
++LDFLAGS			+= -m $(ld-emul)
++
++OBJCOPYFLAGS		+= --remove-section=.reginfo
++
++#
++# Choosing incompatible machines durings configuration will result in
++# error messages during linking.  Select a default linkscript if
++# none has been choosen above.
++#
++
++CPPFLAGS_vmlinux.lds := \
++	$(CFLAGS) \
++	-D"LOADADDR=$(load-y)" \
++	-D"JIFFIES=$(JIFFIES)" \
++	-D"DATAOFFSET=$(if $(dataoffset-y),$(dataoffset-y),0)"
++
++head-y := arch/mips/kernel/head.o arch/mips/kernel/init_task.o
++
++libs-y			+= arch/mips/lib/
++libs-$(CONFIG_32BIT)	+= arch/mips/lib-32/
++libs-$(CONFIG_64BIT)	+= arch/mips/lib-64/
++
++core-y			+= arch/mips/kernel/ arch/mips/mm/ arch/mips/math-emu/
++
++drivers-$(CONFIG_OPROFILE)	+= arch/mips/oprofile/
++
++ifdef CONFIG_LASAT
++rom.bin rom.sw: vmlinux
++	$(Q)$(MAKE) $(build)=arch/mips/lasat/image $@
++endif
++
++#
++# Some machines like the Indy need 32-bit ELF binaries for booting purposes.
++# Other need ECOFF, so we build a 32-bit ELF binary for them which we then
++# convert to ECOFF using elf2ecoff.
++#
++vmlinux.32: vmlinux
++	$(OBJCOPY) -O $(32bit-bfd) $(OBJCOPYFLAGS) $< $@
++
++#
++# The 64-bit ELF tools are pretty broken so at this time we generate 64-bit
++# ELF files from 32-bit files by conversion.
++#
++vmlinux.64: vmlinux
++	$(OBJCOPY) -O $(64bit-bfd) $(OBJCOPYFLAGS) $< $@
++
++makeboot =$(Q)$(MAKE) $(build)=arch/mips/boot VMLINUX=$(vmlinux-32) $(1)
++
++ifdef CONFIG_BOOT_ELF32
++all:	$(vmlinux-32)
++endif
++
++ifdef CONFIG_BOOT_ELF64
++all:	$(vmlinux-64)
++endif
++
++ifdef CONFIG_MIPS_ATLAS
++all:	vmlinux.srec
++endif
++
++ifdef CONFIG_MIPS_MALTA
++all:	vmlinux.srec
++endif
++
++ifdef CONFIG_MIPS_SEAD
++all:	vmlinux.srec
++endif
++
++ifdef CONFIG_QEMU
++all:	vmlinux.bin
++endif
++
++ifdef CONFIG_SNI_RM200_PCI
++all:	vmlinux.ecoff
++endif
++
++vmlinux.bin: $(vmlinux-32)
++	+@$(call makeboot,$@)
++
++vmlinux.ecoff vmlinux.rm200: $(vmlinux-32)
++	+@$(call makeboot,$@)
++
++vmlinux.srec: $(vmlinux-32)
++	+@$(call makeboot,$@)
++
++zImage: vmlinux
++	+@$(call makeboot,$@)
++
++CLEAN_FILES += vmlinux.ecoff \
++	       vmlinux.srec \
++	       vmlinux.rm200.tmp \
++	       vmlinux.rm200
++
++archclean:
++	@$(MAKE) $(clean)=arch/mips/boot
++	@$(MAKE) $(clean)=arch/mips/lasat
++	@$(MAKE) $(clean)=arch/mips/boot/compressed
++
++CLEAN_FILES += vmlinux.32 \
++	       vmlinux.64 \
++	       vmlinux.ecoff
+diff -urN linux-2.6.16.7/arch/mips/boot/Makefile linux-2.6.16.7.new/arch/mips/boot/Makefile
+--- linux-2.6.16.7/arch/mips/boot/Makefile	2006-04-17 23:53:25.000000000 +0200
++++ linux-2.6.16.7.new/arch/mips/boot/Makefile	2006-04-20 19:27:22.000000000 +0200
+@@ -16,6 +16,7 @@
+   E2EFLAGS =
+ endif
+ 
++
+ #
+ # Drop some uninteresting sections in the kernel.
+ # This is only relevant for ELF kernels but doesn't hurt a.out
+@@ -25,7 +26,10 @@
+ 
+ VMLINUX = vmlinux
+ 
+-all: vmlinux.ecoff vmlinux.srec addinitrd
++ZBOOT_TARGETS	= zImage zImage.flash
++bootdir-y	:= compressed
++
++all: vmlinux.ecoff vmlinux.srec addinitrd zImage
+ 
+ vmlinux.ecoff: $(obj)/elf2ecoff $(VMLINUX)
+ 	$(obj)/elf2ecoff $(VMLINUX) vmlinux.ecoff $(E2EFLAGS)
+@@ -51,3 +55,11 @@
+ 	       vmlinux.bin \
+ 	       vmlinux.ecoff \
+ 	       vmlinux.srec
++ 
++.PHONY: $(ZBOOT_TARGETS) $(bootdir-y)
++ 
++$(ZBOOT_TARGETS): $(bootdir-y)
++
++$(bootdir-y): $(addprefix $(obj)/,$(subdir-y)) \
++		$(addprefix $(obj)/,$(hostprogs-y))
++	$(Q)$(MAKE) $(build)=$(obj)/$@ $(MAKECMDGOALS)
+diff -urN linux-2.6.16.7/arch/mips/boot/Makefile.orig linux-2.6.16.7.new/arch/mips/boot/Makefile.orig
+--- linux-2.6.16.7/arch/mips/boot/Makefile.orig	1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.16.7.new/arch/mips/boot/Makefile.orig	2006-04-17 23:53:25.000000000 +0200
+@@ -0,0 +1,53 @@
++#
++# This file is subject to the terms and conditions of the GNU General Public
++# License.  See the file "COPYING" in the main directory of this archive
++# for more details.
++#
++# Copyright (C) 1995, 1998, 2001, 2002 by Ralf Baechle
++# Copyright (C) 2004  Maciej W. Rozycki
++#
++
++#
++# Some DECstations need all possible sections of an ECOFF executable
++#
++ifdef CONFIG_MACH_DECSTATION
++  E2EFLAGS = -a
++else
++  E2EFLAGS =
++endif
++
++#
++# Drop some uninteresting sections in the kernel.
++# This is only relevant for ELF kernels but doesn't hurt a.out
++#
++drop-sections	= .reginfo .mdebug .comment .note .pdr .options .MIPS.options
++strip-flags	= $(addprefix --remove-section=,$(drop-sections))
++
++VMLINUX = vmlinux
++
++all: vmlinux.ecoff vmlinux.srec addinitrd
++
++vmlinux.ecoff: $(obj)/elf2ecoff $(VMLINUX)
++	$(obj)/elf2ecoff $(VMLINUX) vmlinux.ecoff $(E2EFLAGS)
++
++$(obj)/elf2ecoff: $(obj)/elf2ecoff.c
++	$(HOSTCC) -o $@ $^
++
++vmlinux.bin: $(VMLINUX)
++	$(OBJCOPY) -O binary $(strip-flags) $(VMLINUX) $(obj)/vmlinux.bin
++
++vmlinux.srec: $(VMLINUX)
++	$(OBJCOPY) -S -O srec $(strip-flags) $(VMLINUX) $(obj)/vmlinux.srec
++
++$(obj)/addinitrd: $(obj)/addinitrd.c
++	$(HOSTCC) -o $@ $^
++
++archhelp:
++	@echo	'* vmlinux.ecoff	- ECOFF boot image'
++	@echo	'* vmlinux.srec		- SREC boot image'
++
++clean-files += addinitrd \
++	       elf2ecoff \
++	       vmlinux.bin \
++	       vmlinux.ecoff \
++	       vmlinux.srec
+diff -urN linux-2.6.16.7/arch/mips/boot/compressed/Makefile linux-2.6.16.7.new/arch/mips/boot/compressed/Makefile
+--- linux-2.6.16.7/arch/mips/boot/compressed/Makefile	1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.16.7.new/arch/mips/boot/compressed/Makefile	2006-04-20 19:27:22.000000000 +0200
+@@ -0,0 +1,32 @@
++
++#
++# arch/mips/boot/compressed/Makefile
++#
++# This file is subject to the terms and conditions of the GNU General Public
++# License.  See the file "COPYING" in the main directory of this archive
++# for more details.
++#
++# Copyright (C) 1994 by Linus Torvalds
++# Adapted for PowerPC by Gary Thomas
++# modified by Cort (cort@cs.nmt.edu)
++#
++# Ported to MIPS by Pete Popov, ppopov@embeddedalley.com
++#
++
++boot		:= arch/mips/boot
++compressed	:= arch/mips/boot/compressed
++
++CFLAGS	 	+= -fno-builtin -D__BOOTER__ -I$(compressed)/include
++
++BOOT_TARGETS	= zImage zImage.flash
++
++bootdir-$(CONFIG_SOC_AU1X00)	:= au1xxx
++subdir-y			:= common lib images
++
++.PHONY: $(BOOT_TARGETS) $(bootdir-y)
++
++$(BOOT_TARGETS): $(bootdir-y)
++
++$(bootdir-y): $(addprefix $(obj)/,$(subdir-y)) \
++		$(addprefix $(obj)/,$(hostprogs-y))
++	$(Q)$(MAKE) $(build)=$(obj)/$@ $(MAKECMDGOALS)
+diff -urN linux-2.6.16.7/arch/mips/boot/compressed/au1xxx/Makefile linux-2.6.16.7.new/arch/mips/boot/compressed/au1xxx/Makefile
+--- linux-2.6.16.7/arch/mips/boot/compressed/au1xxx/Makefile	1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.16.7.new/arch/mips/boot/compressed/au1xxx/Makefile	2006-04-20 19:27:22.000000000 +0200
+@@ -0,0 +1,110 @@
++# arch/mips/boot/compressed/au1xxx/Makefile
++# 
++# Makefile for AMD Alchemy Semiconductor Au1x based boards.
++# All of the boot loader code was derived from the ppc
++# boot code.
++#
++# Copyright 2001,2002 MontaVista Software Inc.
++#
++# Author: Mark A. Greer
++#	  mgreer@mvista.com
++#
++# Copyright 2004 Embedded Alley Solutions, Inc
++# Ported and modified for mips 2.6 support by 
++# Pete Popov <ppopov@embeddedalley.com>
++#
++# This program is free software; you can redistribute  it and/or modify it
++# under  the terms of  the GNU General  Public License as published by the
++# Free Software Foundation;  either version 2 of the  License, or (at your
++# option) any later version.
++
++boot		:= arch/mips/boot
++compressed	:= $(boot)/compressed
++utils		:= $(compressed)/utils
++lib		:= $(compressed)/lib
++images		:= $(compressed)/images
++common		:= $(compressed)/common
++
++#########################################################################
++# START BOARD SPECIFIC VARIABLES
++
++# These two variables control where the zImage is stored
++# in flash and loaded in memory.  It only controls how the srec
++# file is generated, the code is the same.
++RAM_RUN_ADDR = 0x81000000
++
++ifdef CONFIG_MIPS_XXS1500
++FLASH_LOAD_ADDR = 0xBF000000
++else
++FLASH_LOAD_ADDR = 0xBFD00000
++endif
++
++# These two variables specify the free ram region
++# that can be used for temporary malloc area
++AVAIL_RAM_START=0x80500000
++AVAIL_RAM_END=0x80900000
++
++# This one must match the LOADADDR in arch/mips/Makefile!
++LOADADDR=0x80100000
++
++# WARNING WARNING WARNING
++# Note that with a LOADADDR of 0x80100000 and AVAIL_RAM_START of
++# 0x80500000, the max decompressed kernel size can be 4MB. Else we
++# start overwriting ourselve. You can change these vars as needed;
++# it would be much better if we just figured everything out on the fly.
++
++# END BOARD SPECIFIC VARIABLES
++#########################################################################
++
++OBJECTS	:= $(obj)/head.o $(common)/misc-common.o $(common)/misc-simple.o \
++	$(common)/au1k_uart.o
++LIBS := $(lib)/lib.a
++
++ENTRY := $(utils)/entry
++OFFSET := $(utils)/offset
++SIZE := $(utils)/size
++
++LD_ARGS := -T $(compressed)/ld.script -Ttext $(RAM_RUN_ADDR) -Bstatic
++
++ifdef CONFIG_CPU_LITTLE_ENDIAN
++OBJCOPY_ARGS = -O elf32-tradlittlemips
++else
++OBJCOPY_ARGS = -O elf32-tradbigmips
++endif
++
++$(obj)/head.o: $(obj)/head.S $(TOPDIR)/vmlinux
++	$(CC) -I $(TOPDIR)/include $(AFLAGS) \
++	-DKERNEL_ENTRY=$(shell sh $(ENTRY) $(NM) $(TOPDIR)/vmlinux ) \
++	-c -o $*.o $<
++
++$(common)/misc-simple.o:
++	$(CC) -I $(TOPDIR)/include $(CFLAGS) -DINITRD_OFFSET=0 -DINITRD_SIZE=0 -DZIMAGE_OFFSET=0 \
++		-DAVAIL_RAM_START=$(AVAIL_RAM_START) \
++		-DAVAIL_RAM_END=$(AVAIL_RAM_END) \
++		-DLOADADDR=$(LOADADDR) \
++		-DZIMAGE_SIZE=0 -c -o $@ $*.c
++
++$(obj)/zvmlinux: $(OBJECTS) $(LIBS) $(srctree)/$(compressed)/ld.script $(images)/vmlinux.gz $(common)/dummy.o
++	$(OBJCOPY) \
++		--add-section=.image=$(images)/vmlinux.gz \
++		--set-section-flags=.image=contents,alloc,load,readonly,data \
++		$(common)/dummy.o $(common)/image.o
++	$(LD) $(LD_ARGS) -o $@ $(OBJECTS) $(common)/image.o $(LIBS)
++	$(OBJCOPY) $(OBJCOPY_ARGS) $@ $@ -R __kcrctab -R __ksymtab_strings \
++	-R .comment -R .stab -R .stabstr -R .initrd -R .sysmap
++
++# Here we manipulate the image in order to get it the necessary
++# srecord file we need.
++zImage: $(obj)/zvmlinux
++	mv $(obj)/zvmlinux $(images)/zImage
++	$(OBJCOPY) -O srec $(images)/zImage $(images)/zImage.srec
++	$(OBJCOPY) -O binary $(images)/zImage $(images)/zImage.bin
++
++zImage.flash: zImage
++	( \
++	flash=${FLASH_LOAD_ADDR} ; \
++	ram=${RAM_RUN_ADDR} ; \
++	adjust=$$[ $$flash - $$ram ] ; \
++	$(OBJCOPY) -O srec --adjust-vma `printf '0x%08x' $$adjust` \
++		$(images)/zImage $(images)/zImage.flash.srec ; \
++	)
+diff -urN linux-2.6.16.7/arch/mips/boot/compressed/au1xxx/head.S linux-2.6.16.7.new/arch/mips/boot/compressed/au1xxx/head.S
+--- linux-2.6.16.7/arch/mips/boot/compressed/au1xxx/head.S	1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.16.7.new/arch/mips/boot/compressed/au1xxx/head.S	2006-04-20 19:27:12.000000000 +0200
+@@ -0,0 +1,119 @@
++/*
++ * arch/mips/kernel/head.S
++ *
++ * This file is subject to the terms and conditions of the GNU General Public
++ * License.  See the file "COPYING" in the main directory of this archive
++ * for more details.
++ *
++ * Copyright (C) 1994, 1995 Waldorf Electronics
++ * Written by Ralf Baechle and Andreas Busse
++ * Copyright (C) 1995 - 1999 Ralf Baechle
++ * Copyright (C) 1996 Paul M. Antoine
++ * Modified for DECStation and hence R3000 support by Paul M. Antoine
++ * Further modifications by David S. Miller and Harald Koerfgen
++ * Copyright (C) 1999 Silicon Graphics, Inc.
++ *
++ * Head.S contains the MIPS exception handler and startup code.
++ *
++ **************************************************************************
++ *  9 Nov, 2000.
++ *  Added Cache Error exception handler and SBDDP EJTAG debug exception.
++ *
++ *  Kevin Kissell, kevink@mips.com and Carsten Langgaard, carstenl@mips.com
++ *  Copyright (C) 2000 MIPS Technologies, Inc.  All rights reserved.
++ **************************************************************************
++ */
++#include <linux/config.h>
++#include <linux/threads.h>
++
++#include <asm/asm.h>
++#include <asm/cacheops.h>
++#include <asm/mipsregs.h>
++#include <asm/cachectl.h>
++#include <asm/regdef.h>
++
++#define IndexInvalidate_I       0x00
++#define IndexWriteBack_D        0x01
++
++	.set noreorder
++	.cprestore
++	LEAF(start)
++start:
++	bal	locate
++	nop
++locate:
++	subu	s8, ra, 8	/* Where we were loaded */
++	la	sp, (.stack + 8192)
++
++	move	s0, a0		/* Save boot rom start args */
++	move	s1, a1
++	move	s2, a2
++	move	s3, a3
++
++	la	a0, start	/* Where we were linked to run */
++
++	move	a1, s8
++	la	a2, _edata
++	subu	t1, a2, a0
++	srl	t1, t1, 2
++
++	/* copy text section */
++	li	t0, 0
++1:	lw	v0, 0(a1)
++	nop
++	sw	v0, 0(a0)
++	xor	t0, t0, v0
++	addu	a0, 4
++	bne	a2, a0, 1b
++	addu	a1, 4
++
++	/* Clear BSS */
++	la	a0, _edata
++	la	a2, _end
++2:	sw	zero, 0(a0)
++	bne	a2, a0, 2b
++	addu	a0, 4
++
++	/* push the D-Cache and invalidate I-Cache */
++	li	k0, 0x80000000  # start address
++	li	k1, 0x80004000  # end address (16KB I-Cache)
++	subu	k1, 128
++
++1:
++	.set mips3
++	cache	IndexWriteBack_D, 0(k0)
++	cache	IndexWriteBack_D, 32(k0)
++	cache	IndexWriteBack_D, 64(k0)
++	cache	IndexWriteBack_D, 96(k0)
++	cache	IndexInvalidate_I, 0(k0)
++	cache	IndexInvalidate_I, 32(k0)
++	cache	IndexInvalidate_I, 64(k0)
++	cache	IndexInvalidate_I, 96(k0)
++	.set mips0
++
++	bne	k0, k1, 1b
++	addu	k0, k0, 128
++	/* done */
++
++	move	a0, s8		     /* load address */
++	move	a1, t1               /* length in words */
++	move	a2, t0               /* checksum */
++	move	a3, sp
++
++	la	ra, 1f
++	la	k0, decompress_kernel
++	jr	k0
++	nop
++1:
++
++	move	a0, s0
++	move	a1, s1
++	move	a2, s2
++	move	a3, s3
++	li	k0, KERNEL_ENTRY
++	jr	k0
++	nop
++3:
++	b 3b
++	END(start)
++	.comm .stack,4096*2,4
+diff -urN linux-2.6.16.7/arch/mips/boot/compressed/common/Makefile linux-2.6.16.7.new/arch/mips/boot/compressed/common/Makefile
+--- linux-2.6.16.7/arch/mips/boot/compressed/common/Makefile	1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.16.7.new/arch/mips/boot/compressed/common/Makefile	2006-04-20 19:27:12.000000000 +0200
+@@ -0,0 +1,14 @@
++#
++# arch/mips/boot/compressed/common/Makefile
++#
++# This file is subject to the terms and conditions of the GNU General Public
++# License.  See the file "COPYING" in the main directory of this archive
++# for more details.
++#
++# Tom Rini	January 2001
++#
++# Pete Popov, 2004
++#
++
++lib-y		:= misc-common.o no_initrd.o dummy.o
++lib-$(CONFIG_SOC_AU1X00)	+= au1k_uart.o
+diff -urN linux-2.6.16.7/arch/mips/boot/compressed/common/au1k_uart.c linux-2.6.16.7.new/arch/mips/boot/compressed/common/au1k_uart.c
+--- linux-2.6.16.7/arch/mips/boot/compressed/common/au1k_uart.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.16.7.new/arch/mips/boot/compressed/common/au1k_uart.c	2006-04-20 19:27:12.000000000 +0200
+@@ -0,0 +1,103 @@
++/*
++ * BRIEF MODULE DESCRIPTION
++ *	Simple Au1000 uart routines.
++ *
++ * Copyright 2001 MontaVista Software Inc.
++ * Author: MontaVista Software, Inc.
++ *		ppopov@mvista.com or source@mvista.com
++ *
++ *  This program is free software; you can redistribute	 it and/or modify it
++ *  under  the terms of	 the GNU General  Public License as published by the
++ *  Free Software Foundation;  either version 2 of the	License, or (at your
++ *  option) any later version.
++ *
++ *  THIS  SOFTWARE  IS PROVIDED	  ``AS	IS'' AND   ANY	EXPRESS OR IMPLIED
++ *  WARRANTIES,	  INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
++ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
++ *  NO	EVENT  SHALL   THE AUTHOR  BE	 LIABLE FOR ANY	  DIRECT, INDIRECT,
++ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
++ *  NOT LIMITED	  TO, PROCUREMENT OF  SUBSTITUTE GOODS	OR SERVICES; LOSS OF
++ *  USE, DATA,	OR PROFITS; OR	BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
++ *  ANY THEORY OF LIABILITY, WHETHER IN	 CONTRACT, STRICT LIABILITY, OR TORT
++ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
++ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
++ *
++ *  You should have received a copy of the  GNU General Public License along
++ *  with this program; if not, write  to the Free Software Foundation, Inc.,
++ *  675 Mass Ave, Cambridge, MA 02139, USA.
++ */
++#include <linux/config.h>
++#include <asm/io.h>
++#include <asm/mach-au1x00/au1000.h>
++#include "ns16550.h"
++
++typedef         unsigned char uint8;
++typedef         unsigned int  uint32;
++
++#define         UART16550_BAUD_2400             2400
++#define         UART16550_BAUD_4800             4800
++#define         UART16550_BAUD_9600             9600
++#define         UART16550_BAUD_19200            19200
++#define         UART16550_BAUD_38400            38400
++#define         UART16550_BAUD_57600            57600
++#define         UART16550_BAUD_115200           115200
++
++#define         UART16550_PARITY_NONE           0
++#define         UART16550_PARITY_ODD            0x08
++#define         UART16550_PARITY_EVEN           0x18
++#define         UART16550_PARITY_MARK           0x28
++#define         UART16550_PARITY_SPACE          0x38
++
++#define         UART16550_DATA_5BIT             0x0
++#define         UART16550_DATA_6BIT             0x1
++#define         UART16550_DATA_7BIT             0x2
++#define         UART16550_DATA_8BIT             0x3
++
++#define         UART16550_STOP_1BIT             0x0
++#define         UART16550_STOP_2BIT             0x4
++
++/* It would be nice if we had a better way to do this.
++ * It could be a variable defined in one of the board specific files.
++ */
++#undef UART_BASE
++#ifdef CONFIG_COGENT_CSB250
++#define UART_BASE UART3_ADDR
++#else
++#define UART_BASE UART0_ADDR
++#endif
++
++/* memory-mapped read/write of the port */
++#define UART16550_READ(y)    (au_readl(UART_BASE + y) & 0xff)
++#define UART16550_WRITE(y,z) (au_writel(z&0xff, UART_BASE + y))
++
++/*
++ * We use uart 0, which is already initialized by
++ * yamon. 
++ */
++volatile struct NS16550 *
++serial_init(int chan)
++{
++	volatile struct NS16550 *com_port;
++	com_port = (struct NS16550 *) UART_BASE;
++	return (com_port);
++}
++
++void
++serial_putc(volatile struct NS16550 *com_port, unsigned char c)
++{
++	while ((UART16550_READ(UART_LSR)&0x40) == 0);
++	UART16550_WRITE(UART_TX, c);
++}
++
++unsigned char
++serial_getc(volatile struct NS16550 *com_port)
++{
++	while((UART16550_READ(UART_LSR) & 0x1) == 0);
++	return UART16550_READ(UART_RX);
++}
++
++int
++serial_tstc(volatile struct NS16550 *com_port)
++{
++	return((UART16550_READ(UART_LSR) & LSR_DR) != 0);
++}
+diff -urN linux-2.6.16.7/arch/mips/boot/compressed/common/dummy.c linux-2.6.16.7.new/arch/mips/boot/compressed/common/dummy.c
+--- linux-2.6.16.7/arch/mips/boot/compressed/common/dummy.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.16.7.new/arch/mips/boot/compressed/common/dummy.c	2006-04-20 19:27:12.000000000 +0200
+@@ -0,0 +1,4 @@
++int main(void)
++{
++	return 0;
++}
+diff -urN linux-2.6.16.7/arch/mips/boot/compressed/common/misc-common.c linux-2.6.16.7.new/arch/mips/boot/compressed/common/misc-common.c
+--- linux-2.6.16.7/arch/mips/boot/compressed/common/misc-common.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.16.7.new/arch/mips/boot/compressed/common/misc-common.c	2006-04-20 19:27:12.000000000 +0200
+@@ -0,0 +1,434 @@
++/*
++ * arch/mips/boot/compressed/common/misc-common.c
++ * 
++ * Misc. bootloader code (almost) all platforms can use
++ *
++ * Author: Johnnie Peters <jpeters@mvista.com>
++ * Editor: Tom Rini <trini@mvista.com>
++ *
++ * Derived from arch/ppc/boot/prep/misc.c
++ *
++ * Ported by Pete Popov <ppopov@mvista.com> to
++ * support mips board(s).  I also got rid of the vga console
++ * code.
++ *
++ * Copyright 2000-2001 MontaVista Software Inc.
++ *
++ * Ported to MIPS 2.6 by Pete Popov, <ppopov@embeddedalley.com>
++ *
++ * This program is free software; you can redistribute  it and/or modify it
++ * under  the terms of  the GNU General  Public License as published by the
++ * Free Software Foundation;  either version 2 of the  License, or (at your
++ * option) any later version.
++ *
++ * THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR   IMPLIED
++ * WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
++ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
++ * NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT,  INDIRECT,
++ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
++ * NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
++ * USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
++ * ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
++ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
++ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
++ *
++ * You should have received a copy of the  GNU General Public License along
++ * with this program; if not, write  to the Free Software Foundation, Inc.,
++ * 675 Mass Ave, Cambridge, MA 02139, USA.
++ */
++
++#include <stdarg.h>	/* for va_ bits */
++#include <linux/config.h>
++#include <linux/string.h>
++#include <linux/zlib.h>
++
++extern char *avail_ram;
++extern char *end_avail;
++extern char _end[];
++
++void puts(const char *);
++void putc(const char c);
++void puthex(unsigned long val);
++void _bcopy(char *src, char *dst, int len);
++void gunzip(void *, int, unsigned char *, int *);
++static int _cvt(unsigned long val, char *buf, long radix, char *digits);
++
++void _vprintk(void(*)(const char), const char *, va_list ap);
++
++struct NS16550 *com_port;
++
++int serial_tstc(volatile struct NS16550 *);
++unsigned char serial_getc(volatile struct NS16550 *);
++void serial_putc(volatile struct NS16550 *, unsigned char);
++
++void pause(void)
++{
++	puts("pause\n");
++}
++
++void exit(void)
++{
++	puts("exit\n");
++	while(1); 
++}
++
++int tstc(void)
++{
++	return (serial_tstc(com_port));
++}
++
++int getc(void)
++{
++	while (1) {
++		if (serial_tstc(com_port))
++			return (serial_getc(com_port));
++	}
++}
++
++void 
++putc(const char c)
++{
++	serial_putc(com_port, c);
++	if ( c == '\n' )
++		serial_putc(com_port, '\r');
++}
++
++void puts(const char *s)
++{
++	char c;
++	while ( ( c = *s++ ) != '\0' ) {
++	        serial_putc(com_port, c);
++	        if ( c == '\n' ) serial_putc(com_port, '\r');
++	}
++}
++
++void error(char *x)
++{
++	puts("\n\n");
++	puts(x);
++	puts("\n\n -- System halted");
++
++	while(1);	/* Halt */
++}
++
++static void *zalloc(unsigned size)
++{
++	void *p = avail_ram;
++
++	size = (size + 7) & -8;
++	avail_ram += size;
++	if (avail_ram > end_avail) {
++		puts("oops... out of memory\n");
++		pause();
++	}
++	return p;
++}
++
++
++#define HEAD_CRC	2
++#define EXTRA_FIELD	4
++#define ORIG_NAME	8
++#define COMMENT		0x10
++#define RESERVED	0xe0
++
++#define DEFLATED	8
++
++void gunzip(void *dst, int dstlen, unsigned char *src, int *lenp)
++{
++	z_stream s;
++	int r, i, flags;
++
++	/* skip header */
++	i = 10;
++	flags = src[3];
++	if (src[2] != Z_DEFLATED || (flags & RESERVED) != 0) {
++		puts("bad gzipped data\n");
++		exit();
++	}
++	if ((flags & EXTRA_FIELD) != 0)
++		i = 12 + src[10] + (src[11] << 8);
++	if ((flags & ORIG_NAME) != 0)
++		while (src[i++] != 0)
++			;
++	if ((flags & COMMENT) != 0)
++		while (src[i++] != 0)
++			;
++	if ((flags & HEAD_CRC) != 0)
++		i += 2;
++	if (i >= *lenp) {
++		puts("gunzip: ran out of data in header\n");
++		exit();
++	}
++
++	/* Initialize ourself. */
++	s.workspace = zalloc(zlib_inflate_workspacesize());
++	r = zlib_inflateInit2(&s, -MAX_WBITS);
++	if (r != Z_OK) {
++		puts("zlib_inflateInit2 returned "); puthex(r); puts("\n");
++		exit();
++	}
++	s.next_in = src + i;
++	s.avail_in = *lenp - i;
++	s.next_out = dst;
++	s.avail_out = dstlen;
++	r = zlib_inflate(&s, Z_FINISH);
++	if (r != Z_OK && r != Z_STREAM_END) {
++		puts("inflate returned "); puthex(r); puts("\n");
++		exit();
++	}
++	*lenp = s.next_out - (unsigned char *) dst;
++	zlib_inflateEnd(&s);
++}
++
++void
++puthex(unsigned long val)
++{
++
++	unsigned char buf[10];
++	int i;
++	for (i = 7;  i >= 0;  i--)
++	{
++		buf[i] = "0123456789ABCDEF"[val & 0x0F];
++		val >>= 4;
++	}
++	buf[8] = '\0';
++	puts(buf);
++}
++
++#define FALSE 0
++#define TRUE  1
++
++void
++_printk(char const *fmt, ...)
++{
++	va_list ap;
++
++	va_start(ap, fmt);
++	_vprintk(putc, fmt, ap);
++	va_end(ap);
++	return;
++}
++
++#define is_digit(c) ((c >= '0') && (c <= '9'))
++
++void
++_vprintk(void(*putc)(const char), const char *fmt0, va_list ap)
++{
++	char c, sign, *cp = 0;
++	int left_prec, right_prec, zero_fill, length = 0, pad, pad_on_right;
++	char buf[32];
++	long val;
++	while ((c = *fmt0++))
++	{
++		if (c == '%')
++		{
++			c = *fmt0++;
++			left_prec = right_prec = pad_on_right = 0;
++			if (c == '-')
++			{
++				c = *fmt0++;
++				pad_on_right++;
++			}
++			if (c == '0')
++			{
++				zero_fill = TRUE;
++				c = *fmt0++;
++			} else
++			{
++				zero_fill = FALSE;
++			}
++			while (is_digit(c))
++			{
++				left_prec = (left_prec * 10) + (c - '0');
++				c = *fmt0++;
++			}
++			if (c == '.')
++			{
++				c = *fmt0++;
++				zero_fill++;
++				while (is_digit(c))
++				{
++					right_prec = (right_prec * 10) + (c - '0');
++					c = *fmt0++;
++				}
++			} else
++			{
++				right_prec = left_prec;
++			}
++			sign = '\0';
++			switch (c)
++			{
++			case 'd':
++			case 'x':
++			case 'X':
++				val = va_arg(ap, long);
++				switch (c)
++				{
++				case 'd':
++					if (val < 0)
++					{
++						sign = '-';
++						val = -val;
++					}
++					length = _cvt(val, buf, 10, "0123456789");
++					break;
++				case 'x':
++					length = _cvt(val, buf, 16, "0123456789abcdef");
++					break;
++				case 'X':
++					length = _cvt(val, buf, 16, "0123456789ABCDEF");
++					break;
++				}
++				cp = buf;
++				break;
++			case 's':
++				cp = va_arg(ap, char *);
++				length = strlen(cp);
++				break;
++			case 'c':
++				c = va_arg(ap, long /*char*/);
++				(*putc)(c);
++				continue;
++			default:
++				(*putc)('?');
++			}
++			pad = left_prec - length;
++			if (sign != '\0')
++			{
++				pad--;
++			}
++			if (zero_fill)
++			{
++				c = '0';
++				if (sign != '\0')
++				{
++					(*putc)(sign);
++					sign = '\0';
++				}
++			} else
++			{
++				c = ' ';
++			}
++			if (!pad_on_right)
++			{
++				while (pad-- > 0)
++				{
++					(*putc)(c);
++				}
++			}
++			if (sign != '\0')
++			{
++				(*putc)(sign);
++			}
++			while (length-- > 0)
++			{
++				(*putc)(c = *cp++);
++				if (c == '\n')
++				{
++					(*putc)('\r');
++				}
++			}
++			if (pad_on_right)
++			{
++				while (pad-- > 0)
++				{
++					(*putc)(c);
++				}
++			}
++		} else
++		{
++			(*putc)(c);
++			if (c == '\n')
++			{
++				(*putc)('\r');
++			}
++		}
++	}
++}
++
++int
++_cvt(unsigned long val, char *buf, long radix, char *digits)
++{
++	char temp[80];
++	char *cp = temp;
++	int length = 0;
++	if (val == 0)
++	{ /* Special case */
++		*cp++ = '0';
++	} else
++		while (val)
++		{
++			*cp++ = digits[val % radix];
++			val /= radix;
++		}
++	while (cp != temp)
++	{
++		*buf++ = *--cp;
++		length++;
++	}
++	*buf = '\0';
++	return (length);
++}
++
++void
++_dump_buf_with_offset(unsigned char *p, int s, unsigned char *base)
++{
++	int i, c;
++	if ((unsigned int)s > (unsigned int)p)
++	{
++		s = (unsigned int)s - (unsigned int)p;
++	}
++	while (s > 0)
++	{
++		if (base)
++		{
++			_printk("%06X: ", (int)p - (int)base);
++		} else
++		{
++			_printk("%06X: ", p);
++		}
++		for (i = 0;  i < 16;  i++)
++		{
++			if (i < s)
++			{
++				_printk("%02X", p[i] & 0xFF);
++			} else
++			{
++				_printk("  ");
++			}
++			if ((i % 2) == 1) _printk(" ");
++			if ((i % 8) == 7) _printk(" ");
++		}
++		_printk(" |");
++		for (i = 0;  i < 16;  i++)
++		{
++			if (i < s)
++			{
++				c = p[i] & 0xFF;
++				if ((c < 0x20) || (c >= 0x7F)) c = '.';
++			} else
++			{
++				c = ' ';
++			}
++			_printk("%c", c);
++		}
++		_printk("|\n");
++		s -= 16;
++		p += 16;
++	}
++}
++
++void
++_dump_buf(unsigned char *p, int s)
++{
++	_printk("\n");
++	_dump_buf_with_offset(p, s, 0);
++}
++
++/*
++ * Local variables:
++ *  c-indent-level: 8
++ *  c-basic-offset: 8
++ *  tab-width: 8
++ * End:
++ */
+diff -urN linux-2.6.16.7/arch/mips/boot/compressed/common/misc-simple.c linux-2.6.16.7.new/arch/mips/boot/compressed/common/misc-simple.c
+--- linux-2.6.16.7/arch/mips/boot/compressed/common/misc-simple.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.16.7.new/arch/mips/boot/compressed/common/misc-simple.c	2006-04-20 19:27:22.000000000 +0200
+@@ -0,0 +1,122 @@
++/*
++ * arch/mips/zboot/common/misc-simple.c
++ *
++ * Misc. bootloader code for many machines.  This assumes you have are using
++ * a 6xx/7xx/74xx CPU in your machine.  This assumes the chunk of memory
++ * below 8MB is free.  Finally, it assumes you have a NS16550-style uart for 
++ * your serial console.  If a machine meets these requirements, it can quite
++ * likely use this code during boot.
++ * 
++ * Author: Matt Porter <mporter@mvista.com>
++ * Derived from arch/ppc/boot/prep/misc.c
++ *
++ * Copyright 2001 MontaVista Software Inc.
++ *
++ * This program is free software; you can redistribute  it and/or modify it
++ * under  the terms of  the GNU General  Public License as published by the
++ * Free Software Foundation;  either version 2 of the  License, or (at your
++ * option) any later version.
++ */
++
++#include <linux/types.h>
++#include <linux/elf.h>
++#include <linux/config.h>
++
++#include <asm/page.h>
++
++#include "linux/zlib.h"
++
++extern struct NS16550 *com_port;
++
++char *avail_ram;
++char *end_avail;
++extern char _end[];
++char *zimage_start;
++
++#ifdef CONFIG_CMDLINE
++#define CMDLINE CONFIG_CMDLINE
++#else
++#define CMDLINE ""
++#endif
++char cmd_preset[] = CMDLINE;
++char cmd_buf[256];
++char *cmd_line = cmd_buf;
++
++/* The linker tells us where the image is.
++*/
++extern unsigned char __image_begin, __image_end;
++extern unsigned char __ramdisk_begin, __ramdisk_end;
++unsigned long initrd_size;
++
++extern void puts(const char *);
++extern void putc(const char c);
++extern void puthex(unsigned long val);
++extern void *memcpy(void * __dest, __const void * __src,
++			    __kernel_size_t __n);
++extern void gunzip(void *, int, unsigned char *, int *);
++extern void udelay(long delay);
++extern int tstc(void);
++extern int getc(void);
++extern volatile struct NS16550 *serial_init(int chan);
++
++void
++decompress_kernel(unsigned long load_addr, int num_words, 
++		unsigned long cksum, unsigned long *sp)
++{
++	extern unsigned long start;
++	int	zimage_size;
++
++	com_port = (struct NS16550 *)serial_init(0);
++
++	initrd_size = (unsigned long)(&__ramdisk_end) -
++		(unsigned long)(&__ramdisk_begin);
++
++	/*
++	 * Reveal where we were loaded at and where we
++	 * were relocated to.
++	 */
++	puts("loaded at:     "); puthex(load_addr);
++	puts(" "); puthex((unsigned long)(load_addr + (4*num_words))); puts("\n");
++	if ( (unsigned long)load_addr != (unsigned long)&start )
++	{
++		puts("relocated to:  "); puthex((unsigned long)&start);
++		puts(" ");
++		puthex((unsigned long)((unsigned long)&start + (4*num_words)));
++		puts("\n");
++	}
++
++	/*
++	 * We link ourself to an arbitrary low address.  When we run, we
++	 * relocate outself to that address.  __image_being points to
++	 * the part of the image where the zImage is. -- Tom
++	 */
++	zimage_start = (char *)(unsigned long)(&__image_begin);
++	zimage_size = (unsigned long)(&__image_end) -
++			(unsigned long)(&__image_begin);
++
++	/*
++	 * The zImage and initrd will be between start and _end, so they've
++	 * already been moved once.  We're good to go now. -- Tom
++	 */
++	puts("zimage at:     "); puthex((unsigned long)zimage_start);
++	puts(" "); puthex((unsigned long)(zimage_size+zimage_start));
++	puts("\n");
++
++	if ( initrd_size ) {
++		puts("initrd at:     ");
++		puthex((unsigned long)(&__ramdisk_begin));
++		puts(" "); puthex((unsigned long)(&__ramdisk_end));puts("\n");
++	}
++
++	/* assume the chunk below 8M is free */
++	avail_ram = (char *)AVAIL_RAM_START;
++	end_avail = (char *)AVAIL_RAM_END;
++
++	/* Display standard Linux/MIPS boot prompt for kernel args */
++	puts("Uncompressing Linux at load address ");
++	puthex(LOADADDR);
++	puts("\n");
++	/* I don't like this hard coded gunzip size (fixme) */
++	gunzip((void *)LOADADDR, 0x400000, zimage_start, &zimage_size);
++	puts("Now booting the kernel\n");
++}
+diff -urN linux-2.6.16.7/arch/mips/boot/compressed/common/no_initrd.c linux-2.6.16.7.new/arch/mips/boot/compressed/common/no_initrd.c
+--- linux-2.6.16.7/arch/mips/boot/compressed/common/no_initrd.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.16.7.new/arch/mips/boot/compressed/common/no_initrd.c	2006-04-20 19:27:12.000000000 +0200
+@@ -0,0 +1,2 @@
++char initrd_data[1];
++int initrd_len = 0;
+diff -urN linux-2.6.16.7/arch/mips/boot/compressed/images/Makefile linux-2.6.16.7.new/arch/mips/boot/compressed/images/Makefile
+--- linux-2.6.16.7/arch/mips/boot/compressed/images/Makefile	1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.16.7.new/arch/mips/boot/compressed/images/Makefile	2006-04-20 19:27:12.000000000 +0200
+@@ -0,0 +1,17 @@
++
++#
++# This dir holds all of the images for MIPS machines.
++# Tom Rini	January 2001
++# Pete Popov	2004
++
++extra-y		:= vmlinux.bin vmlinux.gz
++
++OBJCOPYFLAGS_vmlinux.bin := -O binary
++$(obj)/vmlinux.bin: vmlinux FORCE
++	$(call if_changed,objcopy)
++
++$(obj)/vmlinux.gz: $(obj)/vmlinux.bin FORCE
++	$(call if_changed,gzip)
++
++# Files generated that shall be removed upon make clean
++clean-files	:= vmlinux* zImage* 
+diff -urN linux-2.6.16.7/arch/mips/boot/compressed/include/nonstdio.h linux-2.6.16.7.new/arch/mips/boot/compressed/include/nonstdio.h
+--- linux-2.6.16.7/arch/mips/boot/compressed/include/nonstdio.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.16.7.new/arch/mips/boot/compressed/include/nonstdio.h	2006-04-20 19:27:12.000000000 +0200
+@@ -0,0 +1,18 @@
++/*
++ * Copyright (C) Paul Mackerras 1997.
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * as published by the Free Software Foundation; either version
++ * 2 of the License, or (at your option) any later version.
++ */
++typedef int	FILE;
++extern FILE *stdin, *stdout;
++#define NULL	((void *)0)
++#define EOF	(-1)
++#define fopen(n, m)	NULL
++#define fflush(f)	0
++#define fclose(f)	0
++extern char *fgets();
++
++#define perror(s)	printf("%s: no files!\n", (s))
+diff -urN linux-2.6.16.7/arch/mips/boot/compressed/include/ns16550.h linux-2.6.16.7.new/arch/mips/boot/compressed/include/ns16550.h
+--- linux-2.6.16.7/arch/mips/boot/compressed/include/ns16550.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.16.7.new/arch/mips/boot/compressed/include/ns16550.h	2006-04-20 19:27:12.000000000 +0200
+@@ -0,0 +1,46 @@
++/*
++ * NS16550 Serial Port
++ */
++
++/*
++ * Figure out which file will have the definitons of COMx
++ */
++
++/* Some machines have their uart registers 16 bytes apart.  Most don't.
++ * TODO: Make this work like drivers/char/serial does - Tom */
++#if !defined(UART_REG_PAD)
++#define UART_REG_PAD(x)
++#endif
++
++struct NS16550
++ {
++  unsigned char rbr;  /* 0 */
++  UART_REG_PAD(rbr)
++  unsigned char ier;  /* 1 */
++  UART_REG_PAD(ier)
++  unsigned char fcr;  /* 2 */
++  UART_REG_PAD(fcr)
++  unsigned char lcr;  /* 3 */
++  UART_REG_PAD(lcr)
++  unsigned char mcr;  /* 4 */
++  UART_REG_PAD(mcr)
++  unsigned char lsr;  /* 5 */
++  UART_REG_PAD(lsr)
++  unsigned char msr;  /* 6 */
++  UART_REG_PAD(msr)
++  unsigned char scr;  /* 7 */
++ };
++
++#define thr rbr
++#define iir fcr
++#define dll rbr
++#define dlm ier
++
++#define LSR_DR   0x01  /* Data ready */
++#define LSR_OE   0x02  /* Overrun */
++#define LSR_PE   0x04  /* Parity error */
++#define LSR_FE   0x08  /* Framing error */
++#define LSR_BI   0x10  /* Break */
++#define LSR_THRE 0x20  /* Xmit holding register empty */
++#define LSR_TEMT 0x40  /* Xmitter empty */
++#define LSR_ERR  0x80  /* Error */
+diff -urN linux-2.6.16.7/arch/mips/boot/compressed/include/pb1000_serial.h linux-2.6.16.7.new/arch/mips/boot/compressed/include/pb1000_serial.h
+--- linux-2.6.16.7/arch/mips/boot/compressed/include/pb1000_serial.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.16.7.new/arch/mips/boot/compressed/include/pb1000_serial.h	2006-04-20 19:27:12.000000000 +0200
+@@ -0,0 +1,20 @@
++/*
++ * arch/ppc/boot/include/sandpoint_serial.h
++ * 
++ * Location of the COM ports on Motorola SPS Sandpoint machines
++ *
++ * Author: Mark A. Greer
++ * 	   mgreer@mvista.com
++ *
++ * Copyright 2001 MontaVista Software Inc.
++ *
++ * This program is free software; you can redistribute  it and/or modify it
++ * under  the terms of  the GNU General  Public License as published by the
++ * Free Software Foundation;  either version 2 of the  License, or (at your
++ * option) any later version.
++ */
++
++#define COM1 0xfe0003f8
++#define COM2 0xfe0002f8
++#define COM3 0x00000000		/* No COM3 */
++#define COM4 0x00000000		/* No COM4 */
+diff -urN linux-2.6.16.7/arch/mips/boot/compressed/ld.script linux-2.6.16.7.new/arch/mips/boot/compressed/ld.script
+--- linux-2.6.16.7/arch/mips/boot/compressed/ld.script	1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.16.7.new/arch/mips/boot/compressed/ld.script	2006-04-20 19:27:12.000000000 +0200
+@@ -0,0 +1,151 @@
++OUTPUT_ARCH(mips)
++ENTRY(start)
++SECTIONS
++{
++  /* Read-only sections, merged into text segment: */
++  /* . = 0x81000000; */
++  .init          : { *(.init)		} =0
++  .text      :
++  {
++    _ftext = . ;
++    *(.text)
++    *(.rodata) *(.rodata.*)
++    *(.rodata1)
++    /* .gnu.warning sections are handled specially by elf32.em.  */
++    *(.gnu.warning)
++  } =0
++  .kstrtab : { *(.kstrtab) }
++
++  . = ALIGN(16);		/* Exception table */
++  __start___ex_table = .;
++  __ex_table : { *(__ex_table) }
++  __stop___ex_table = .;
++
++  __start___dbe_table = .;	/* Exception table for data bus errors */
++  __dbe_table : { *(__dbe_table) }
++  __stop___dbe_table = .;
++
++  __start___ksymtab = .;	/* Kernel symbol table */
++  __ksymtab : { *(__ksymtab) }
++  __stop___ksymtab = .;
++
++  _etext = .;
++
++  . = ALIGN(8192);
++  .data.init_task : { *(.data.init_task) }
++
++  /* Startup code */
++  . = ALIGN(4096);
++  __init_begin = .;
++  .text.init : { *(.text.init) }
++  .data.init : { *(.data.init) }
++  . = ALIGN(16);
++  __setup_start = .;
++  .setup.init : { *(.setup.init) }
++  __setup_end = .;
++  __initcall_start = .;
++  .initcall.init : { *(.initcall.init) }
++  __initcall_end = .;
++  . = ALIGN(4096);	/* Align double page for init_task_union */
++  __init_end = .;
++
++  . = ALIGN(4096);
++  .data.page_aligned : { *(.data.idt) }
++
++  . = ALIGN(32);
++  .data.cacheline_aligned : { *(.data.cacheline_aligned) }
++
++  .fini      : { *(.fini)    } =0
++  .reginfo : { *(.reginfo) }
++  /* Adjust the address for the data segment.  We want to adjust up to
++     the same address within the page on the next page up.  It would
++     be more correct to do this:
++       . = .;
++     The current expression does not correctly handle the case of a
++     text segment ending precisely at the end of a page; it causes the
++     data segment to skip a page.  The above expression does not have
++     this problem, but it will currently (2/95) cause BFD to allocate
++     a single segment, combining both text and data, for this case.
++     This will prevent the text segment from being shared among
++     multiple executions of the program; I think that is more
++     important than losing a page of the virtual address space (note
++     that no actual memory is lost; the page which is skipped can not
++     be referenced).  */
++  . = .;
++  .data    :
++  {
++    _fdata = . ;
++    *(.data)
++
++   /* Put the compressed image here, so bss is on the end. */
++   __image_begin = .;
++   *(.image)
++   __image_end = .;
++   /* Align the initial ramdisk image (INITRD) on page boundaries. */
++   . = ALIGN(4096);
++   __ramdisk_begin = .;
++   *(.initrd)
++   __ramdisk_end = .;
++   . = ALIGN(4096);
++
++    CONSTRUCTORS
++  }
++  .data1   : { *(.data1) }
++  _gp = . + 0x8000;
++  .lit8 : { *(.lit8) }
++  .lit4 : { *(.lit4) }
++  .ctors         : { *(.ctors)   }
++  .dtors         : { *(.dtors)   }
++  .got           : { *(.got.plt) *(.got) }
++  .dynamic       : { *(.dynamic) }
++  /* We want the small data sections together, so single-instruction offsets
++     can access them all, and initialized data all before uninitialized, so
++     we can shorten the on-disk segment size.  */
++  .sdata     : { *(.sdata) }
++  . = ALIGN(4);
++  _edata  =  .;
++  PROVIDE (edata = .);
++
++  __bss_start = .;
++  _fbss = .;
++  .sbss      : { *(.sbss) *(.scommon) }
++  .bss       :
++  {
++   *(.dynbss)
++   *(.bss)
++   *(COMMON)
++   .  = ALIGN(4);
++  _end = . ;
++  PROVIDE (end = .);
++  }
++
++  /* Sections to be discarded */
++  /DISCARD/ :
++  {
++        *(.text.exit)
++        *(.data.exit)
++        *(.exitcall.exit)
++  }
++
++  /* This is the MIPS specific mdebug section.  */
++  .mdebug : { *(.mdebug) }
++  /* These are needed for ELF backends which have not yet been
++     converted to the new style linker.  */
++  .stab 0 : { *(.stab) }
++  .stabstr 0 : { *(.stabstr) }
++  /* DWARF debug sections.
++     Symbols in the .debug DWARF section are relative to the beginning of the
++     section so we begin .debug at 0.  It's not clear yet what needs to happen
++     for the others.   */
++  .debug          0 : { *(.debug) }
++  .debug_srcinfo  0 : { *(.debug_srcinfo) }
++  .debug_aranges  0 : { *(.debug_aranges) }
++  .debug_pubnames 0 : { *(.debug_pubnames) }
++  .debug_sfnames  0 : { *(.debug_sfnames) }
++  .line           0 : { *(.line) }
++  /* These must appear regardless of  .  */
++  .gptab.sdata : { *(.gptab.data) *(.gptab.sdata) }
++  .gptab.sbss : { *(.gptab.bss) *(.gptab.sbss) }
++  .comment : { *(.comment) }
++  .note : { *(.note) }
++}
+diff -urN linux-2.6.16.7/arch/mips/boot/compressed/lib/Makefile linux-2.6.16.7.new/arch/mips/boot/compressed/lib/Makefile
+--- linux-2.6.16.7/arch/mips/boot/compressed/lib/Makefile	1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.16.7.new/arch/mips/boot/compressed/lib/Makefile	2006-04-20 19:27:12.000000000 +0200
+@@ -0,0 +1,11 @@
++
++#
++# Makefile for some libs needed by zImage.
++#
++
++lib-y := $(addprefix ../../../../../lib/zlib_inflate/, \
++	infblock.o infcodes.o inffast.o inflate.o inftrees.o infutil.o) \
++	$(addprefix ../../../../../lib/, ctype.o string.o) \
++	$(addprefix ../../../../../arch/mips/lib/, memcpy.o) \
++
++
+diff -urN linux-2.6.16.7/arch/mips/boot/compressed/utils/entry linux-2.6.16.7.new/arch/mips/boot/compressed/utils/entry
+--- linux-2.6.16.7/arch/mips/boot/compressed/utils/entry	1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.16.7.new/arch/mips/boot/compressed/utils/entry	2006-04-20 19:27:12.000000000 +0200
+@@ -0,0 +1,12 @@
++#!/bin/sh
++
++# grab the kernel_entry address from the vmlinux elf image
++entry=`$1 $2  | grep kernel_entry`
++
++fs=`echo $entry | grep ffffffff`  # check toolchain output
++
++if [ -n "$fs" ]; then
++	echo "0x"`$1 $2  | grep kernel_entry | cut -c9- | awk '{print $1}'`
++else
++	echo "0x"`$1 $2  | grep kernel_entry | cut -c1- | awk '{print $1}'`
++fi
+diff -urN linux-2.6.16.7/arch/mips/boot/compressed/utils/offset linux-2.6.16.7.new/arch/mips/boot/compressed/utils/offset
+--- linux-2.6.16.7/arch/mips/boot/compressed/utils/offset	1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.16.7.new/arch/mips/boot/compressed/utils/offset	2006-04-20 19:27:12.000000000 +0200
+@@ -0,0 +1,3 @@
++#!/bin/sh
++
++echo "0x"`$1 -h $2  | grep $3 | grep -v zvmlinux| awk '{print $6}'`
+diff -urN linux-2.6.16.7/arch/mips/boot/compressed/utils/size linux-2.6.16.7.new/arch/mips/boot/compressed/utils/size
+--- linux-2.6.16.7/arch/mips/boot/compressed/utils/size	1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.16.7.new/arch/mips/boot/compressed/utils/size	2006-04-20 19:27:12.000000000 +0200
+@@ -0,0 +1,4 @@
++#!/bin/sh
++
++OFFSET=`$1 -h $2  | grep $3 | grep -v zvmlinux | awk '{print $3}'`
++echo "0x"$OFFSET
diff --git a/openwrt/target/linux/au1000-2.6/patches/004-mtx1_watchdog.patch b/openwrt/target/linux/au1000-2.6/patches/004-mtx1_watchdog.patch
new file mode 100644
index 0000000000..3edd749bb8
--- /dev/null
+++ b/openwrt/target/linux/au1000-2.6/patches/004-mtx1_watchdog.patch
@@ -0,0 +1,285 @@
+diff -urN linux-2.6.16.7/drivers/char/watchdog/Kconfig linux-2.6.16.7.new/drivers/char/watchdog/Kconfig
+--- linux-2.6.16.7/drivers/char/watchdog/Kconfig	2006-04-17 23:53:25.000000000 +0200
++++ linux-2.6.16.7.new/drivers/char/watchdog/Kconfig	2006-04-22 16:40:32.000000000 +0200
+@@ -460,6 +460,14 @@
+ 	  timer expired and no process has written to /dev/watchdog during
+ 	  that time.
+ 
++config MTX1_WATCHDOG
++	tristate "MTX-1 Hardware Watchdog"
++	depends on WATCHDOG && MIPS_MTX1
++	help
++	  Hardware driver for the AccessCube MTX-1 watchdog. This is a
++	  watchdog timer that will reboot the machine after a 100 seconds
++	  timer expired.
++
+ # S390 Architecture
+ 
+ config ZVM_WATCHDOG
+diff -urN linux-2.6.16.7/drivers/char/watchdog/Makefile linux-2.6.16.7.new/drivers/char/watchdog/Makefile
+--- linux-2.6.16.7/drivers/char/watchdog/Makefile	2006-04-17 23:53:25.000000000 +0200
++++ linux-2.6.16.7.new/drivers/char/watchdog/Makefile	2006-04-22 16:38:31.000000000 +0200
+@@ -65,6 +65,7 @@
+ 
+ # MIPS Architecture
+ obj-$(CONFIG_INDYDOG) += indydog.o
++obj-$(CONFIG_MTX1_WATCHDOG) += mtx-1_watchdog.o
+ 
+ # S390 Architecture
+ 
+diff -urN linux-2.6.16.7/drivers/char/watchdog/mtx-1_watchdog.c linux-2.6.16.7.new/drivers/char/watchdog/mtx-1_watchdog.c
+--- linux-2.6.16.7/drivers/char/watchdog/mtx-1_watchdog.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.16.7.new/drivers/char/watchdog/mtx-1_watchdog.c	2006-04-22 16:38:49.000000000 +0200
+@@ -0,0 +1,252 @@
++/*
++ *      Driver for the MTX-1 Watchdog.
++ *
++ *      (c) Copyright 2005 4G Systems <info@4g-systems.biz>, All Rights Reserved.
++ *                              http://www.4g-systems.biz
++ *
++ *      This program is free software; you can redistribute it and/or
++ *      modify it under the terms of the GNU General Public License
++ *      as published by the Free Software Foundation; either version
++ *      2 of the License, or (at your option) any later version.
++ *
++ *      Neither Michael Stickel nor 4G Systems admit liability nor provide
++ *      warranty for any of this software. This material is provided
++ *      "AS-IS" and at no charge.
++ *
++ *      (c) Copyright 2005    4G Systems <info@4g-systems.biz>
++ *
++ *      Release 0.01.
++ *
++ *      Author: Michael Stickel  michael.stickel@4g-systems.biz
++ *
++ *
++ *      The Watchdog is configured to reset the MTX-1
++ *      if it is not triggered for 100 seconds.
++ *      It should not be triggered more often than 1.6 seconds.
++ *
++ *      A timer triggers the watchdog every 5 seconds, until
++ *      it is opened for the first time. After the first open
++ *      it MUST be triggered every 2..95 seconds.
++ */
++#include <linux/config.h>
++#include <linux/module.h>
++#include <linux/version.h>
++#include <linux/types.h>
++#include <linux/errno.h>
++#include <linux/kernel.h>
++#include <linux/sched.h>
++#include <linux/miscdevice.h>
++#include <linux/watchdog.h>
++#include <linux/slab.h>
++#include <linux/init.h>
++#include <asm/uaccess.h>
++#include <linux/fs.h>
++
++#include <asm/mach-au1x00/au1000.h>
++
++#ifndef FALSE
++# define FALSE (0)
++#endif
++
++#ifndef TRUE
++# define TRUE (!FALSE)
++#endif
++
++
++//---------[ Hardware Functions ]-----------------
++
++static void mtx1_trigger_wd (void)
++{
++	/*
++	 * toggle GPIO2_15
++	 */
++
++	u32 tmp = au_readl(GPIO2_DIR);
++	tmp = (tmp & ~(1<<15)) | ((~tmp) & (1<<15));
++	au_writel (tmp, GPIO2_DIR);
++}
++
++static void mtx1_enable_wd (void)
++{
++	au_writel (au_readl(GPIO2_DIR) | (u32)(1<<15), GPIO2_DIR);
++}
++
++static void mtx1_disable_wd (void)
++{
++	au_writel (au_readl(GPIO2_DIR) & ~((u32)(1<<15)), GPIO2_DIR);
++}
++
++
++//---------[ Timer Functions ]-----------------
++
++static struct timer_list   wd_trigger_timer;
++static char                timer_is_running = FALSE;
++
++static void wd_timer_callback (unsigned long data)
++{
++	if (timer_is_running)
++		mod_timer (&wd_trigger_timer, jiffies + 5 * HZ);
++	mtx1_trigger_wd ();
++}
++
++static void start_wd_timer (void)
++{
++	if (!timer_is_running) {
++		struct timer_list *t = &wd_trigger_timer;
++		
++		init_timer (t);
++		t->function = wd_timer_callback;
++		t->data     = (unsigned long)0L;
++		t->expires  = jiffies + 5 * HZ;   // 5 seconds.
++		add_timer (t);
++		timer_is_running = TRUE;
++	}
++}
++
++
++
++static void stop_wd_timer (void)
++{
++	if (timer_is_running) {
++		del_timer(&wd_trigger_timer);
++		timer_is_running = FALSE;
++	}
++}
++
++
++//---------[ File Functions ]-----------------
++
++static char restart_after_close;
++
++static int mtx1wd_open (struct inode *inode, struct file *file)
++{
++	if (MINOR(inode->i_rdev) != WATCHDOG_MINOR) return -ENODEV;
++	//MOD_INC_USE_COUNT;
++
++	// stop the timer, if it is running. It will not be
++	// started again, until the module is loaded again.
++	stop_wd_timer();
++
++	// sleep for 2 seconds, to ensure, that the wd is
++	// not triggered more often than every 2 seconds.
++	schedule_timeout (2 * HZ);
++
++	return 0;
++}
++
++
++static int mtx1wd_release (struct inode *inode, struct file *file) {
++	if (MINOR(inode->i_rdev)==WATCHDOG_MINOR) {
++	}
++	if (restart_after_close)
++		start_wd_timer();
++	//MOD_DEC_USE_COUNT;
++	return 0;
++}
++
++
++static ssize_t mtx1wd_write (struct file *file, const char *buf, size_t count, loff_t *ppos) {
++
++	mtx1_trigger_wd ();
++
++	if (count > 0) {
++               char buffer[10];
++               int n = (count>9)?9:count;
++
++               if (copy_from_user (&buffer, buf, n))
++                       return -EFAULT;
++               buffer[n]=0;
++
++               if (count >= 4 && strncmp("auto", buffer, 4)==0)
++                       restart_after_close = 1;
++
++               else if (count >= 6 && strncmp("manual", buffer, 6)==0)
++                       restart_after_close = 0;
++
++               return n;
++	}
++
++	return 0;
++}
++
++static ssize_t mtx1wd_read (struct file *file, char *buf, size_t count, loff_t *ppos)
++{
++       char * state = restart_after_close ? "auto\n" : "manual\n";
++       int n = strlen(state)+1;
++
++       if (file->f_pos >= n)
++               return 0;
++
++       if (count < n)
++               return -EINVAL;
++
++       if(copy_to_user(buf, state, n))
++               return -EFAULT;
++
++       file->f_pos += n;
++
++       return n;
++}
++
++static struct file_operations mtx1wd_fops = {
++	.owner = THIS_MODULE,
++	.read = mtx1wd_read,
++	.write = mtx1wd_write,
++	.open = mtx1wd_open,
++	.release = mtx1wd_release
++};
++
++
++static struct miscdevice mtx1wd_miscdev = {
++	WATCHDOG_MINOR,
++	"watchdog",
++	&mtx1wd_fops
++};
++
++
++
++//---------[ Module Functions ]-----------------
++
++
++void cleanup_module (void)
++{
++	// stop the timer, if it is running.
++	stop_wd_timer();
++
++	misc_deregister(&mtx1wd_miscdev);
++
++	mtx1_disable_wd ();
++}
++
++
++static int __init init_mtx1_watchdog(void)
++{
++	printk("MTX-1 watchdog driver\n");
++
++	misc_register(&mtx1wd_miscdev);
++	
++	restart_after_close = 0;
++
++	mtx1_enable_wd ();
++
++	//-- trigger it for the first time.
++	//-- We do not exactly know how long it has not been triggered.
++	mtx1_trigger_wd ();
++
++	// start a timer, that calls mtx1_trigger_wd every 5 seconds.
++	start_wd_timer();
++
++	return 0;
++}
++
++static void __exit exit_mtx1_watchdog(void) {
++
++        misc_deregister(&mtx1wd_miscdev);
++}
++
++module_init(init_mtx1_watchdog);
++module_exit(exit_mtx1_watchdog);
++
++MODULE_AUTHOR("Michael Stickel");
++MODULE_DESCRIPTION("Driver for the MTX-1 watchdog");
++MODULE_LICENSE("GPL");