aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorAnsuel Smith <ansuelsmth@gmail.com>2020-08-08 16:50:04 +0200
committerAdrian Schmutzler <freifunk@adrianschmutzler.de>2020-08-24 14:09:11 +0200
commit58d2bd88aefef1f3a37b401223fccae374af6c63 (patch)
treec748931222229e2cffd3e1721f11728a0ce524ad
parentba2ddba56b7824008fb3b544b1e1ae5d52ee39e5 (diff)
downloadupstream-58d2bd88aefef1f3a37b401223fccae374af6c63.tar.gz
upstream-58d2bd88aefef1f3a37b401223fccae374af6c63.tar.bz2
upstream-58d2bd88aefef1f3a37b401223fccae374af6c63.zip
ipq806x: replace pci patchset with upstream version
Changes: - Update patches - Update dts with new binding Tx term offset dropped and replaced with a new compatible Removed: - 0071-5-PCI-qcom-Programming-the-PCIE-iATU-for-IPQ806x Pci init does the same exact thing (was needed in older kernel version) - 0071-7-pcie-Set-PCIE-MRRS-and-MPS-to-256B Rejected upstream, can't find any reason to have this. No regression with testing it on R7800. Tested on R7800 (ipq8065), R7500 v2 ("ipq8064-v2") Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> Tested-by: Paul Blazejowski <paulb@blazebox.homeip.net> [R7800] [rebase and refresh] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
-rw-r--r--target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-ap148.dts2
-rw-r--r--target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-ap161.dts2
-rw-r--r--target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-c2600.dts2
-rw-r--r--target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-d7800.dts2
-rw-r--r--target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-eax500.dtsi2
-rw-r--r--target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-r7500.dts2
-rw-r--r--target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-r7500v2.dts2
-rw-r--r--target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-v2.0.dtsi6
-rw-r--r--target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-vr2600v.dts2
-rw-r--r--target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-wg2600hp.dts2
-rw-r--r--target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-wxr-2533dhp.dts2
-rw-r--r--target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8065-nbg6817.dts2
-rw-r--r--target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8065-r7800.dts2
-rw-r--r--target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8065.dtsi6
-rw-r--r--target/linux/ipq806x/patches-5.4/0071-2-PCI-qcom-Fixed-IPQ806x-PCIE-reset-changes.patch62
-rw-r--r--target/linux/ipq806x/patches-5.4/0071-3-PCI-qcom-Fixed-IPQ806x-PCIE-init-changes.patch124
-rw-r--r--target/linux/ipq806x/patches-5.4/0071-5-PCI-qcom-Programming-the-PCIE-iATU-for-IPQ806x.patch112
-rw-r--r--target/linux/ipq806x/patches-5.4/0071-6-PCI-qcom-Force-GEN1-support.patch59
-rw-r--r--target/linux/ipq806x/patches-5.4/0071-7-pcie-Set-PCIE-MRRS-and-MPS-to-256B.patch69
-rw-r--r--target/linux/ipq806x/patches-5.4/0071-8-pcie-qcom-Fixed-pcie_phy_clk-branch-issue.patch91
-rw-r--r--target/linux/ipq806x/patches-5.4/0071-9-pcie-qcom-change-duplicate-pci-reset-to-phy-reset.patch25
-rw-r--r--target/linux/ipq806x/patches-5.4/085-ipq8064-v1.0-dtsi-additions.patch14
-rw-r--r--target/linux/ipq806x/patches-5.4/093-1-v5.8-ipq806x-PCI-qcom-Add-missing-ipq806x-clocks-in-PCIe-driver.patch (renamed from target/linux/ipq806x/patches-5.4/0071-1-PCI-qcom-Fixed-IPQ806x-specific-clocks.patch)24
-rw-r--r--target/linux/ipq806x/patches-5.4/093-2-v5.8-ipq806x-PCI-qcom-Change-duplicate-PCI-reset-to-phy-reset.patch72
-rw-r--r--target/linux/ipq806x/patches-5.4/093-3-v5.8-ipq806x-PCI-qcom-Add-missing-reset-for-ipq806x.patch62
-rw-r--r--target/linux/ipq806x/patches-5.4/093-4-v5.8-ipq806x-PCI-qcom-Use-bulk-clk-api-and-assert-on-error.patch226
-rw-r--r--target/linux/ipq806x/patches-5.4/093-5-v5.8-ipq806x-PCI-qcom-Define-some-PARF-params-needed-for-ipq8064-SoC.patch67
-rw-r--r--target/linux/ipq806x/patches-5.4/093-6-v5.8-ipq806x-PCI-qcom-Add-support-for-tx-term-offset-for-rev-2_1_0.patch55
-rw-r--r--target/linux/ipq806x/patches-5.4/093-7-v5.8-ipq806x-PCI-qcom-Add-ipq8064-rev2-variant.patch36
-rw-r--r--target/linux/ipq806x/patches-5.4/093-8-v5.8-ipq806x-PCI-qcom-Support-pci-speed-set-for-ipq806x.patch74
30 files changed, 628 insertions, 580 deletions
diff --git a/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-ap148.dts b/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
index a28927cde7..b2fdc427e2 100644
--- a/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
+++ b/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
@@ -48,7 +48,7 @@
&pcie1 {
status = "okay";
- force_gen1 = <1>;
+ max-link-speed = <1>;
};
&nand_controller {
diff --git a/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-ap161.dts b/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-ap161.dts
index f86f61f5ca..6ba3d70808 100644
--- a/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-ap161.dts
+++ b/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-ap161.dts
@@ -56,7 +56,7 @@
&pcie1 {
status = "okay";
- force_gen1 = <1>;
+ max-link-speed = <1>;
};
&pcie2 {
diff --git a/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-c2600.dts b/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-c2600.dts
index 1f2cd247b6..2d5685558e 100644
--- a/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-c2600.dts
+++ b/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-c2600.dts
@@ -355,7 +355,7 @@
&pcie1 {
status = "okay";
- force_gen1 = <1>;
+ max-link-speed = <1>;
};
&mdio0 {
diff --git a/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-d7800.dts b/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-d7800.dts
index dc25a42403..3183ac3f9c 100644
--- a/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-d7800.dts
+++ b/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-d7800.dts
@@ -176,7 +176,7 @@
reset-gpio = <&qcom_pinmux 48 GPIO_ACTIVE_HIGH>;
pinctrl-0 = <&pcie1_pins>;
pinctrl-names = "default";
- force_gen1 = <1>;
+ max-link-speed = <1>;
};
&nand_controller {
diff --git a/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-eax500.dtsi b/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-eax500.dtsi
index c0c8372eec..3e6732e9df 100644
--- a/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-eax500.dtsi
+++ b/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-eax500.dtsi
@@ -23,7 +23,7 @@
&pcie0 {
status = "okay";
- force_gen1 = <1>;
+ max-link-speed = <1>;
};
&pcie1 {
diff --git a/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-r7500.dts b/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-r7500.dts
index 868d1e9a9a..082ae50949 100644
--- a/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-r7500.dts
+++ b/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-r7500.dts
@@ -157,7 +157,7 @@
&pcie1 {
status = "okay";
- force_gen1 = <1>;
+ max-link-speed = <1>;
};
&nand_controller {
diff --git a/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-r7500v2.dts b/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-r7500v2.dts
index 8cb6376ee7..dc912a990c 100644
--- a/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-r7500v2.dts
+++ b/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-r7500v2.dts
@@ -187,7 +187,7 @@
reset-gpio = <&qcom_pinmux 48 GPIO_ACTIVE_LOW>;
pinctrl-0 = <&pcie1_pins>;
pinctrl-names = "default";
- force_gen1 = <1>;
+ max-link-speed = <1>;
};
&nand_controller {
diff --git a/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-v2.0.dtsi b/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-v2.0.dtsi
index 350965200b..b9ee86a891 100644
--- a/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-v2.0.dtsi
+++ b/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-v2.0.dtsi
@@ -41,15 +41,15 @@
};
&pcie0 {
- phy-tx0-term-offset = <0>;
+ compatible = "qcom,pcie-ipq8064-v2";
};
&pcie1 {
- phy-tx0-term-offset = <0>;
+ compatible = "qcom,pcie-ipq8064-v2";
};
&pcie2 {
- phy-tx0-term-offset = <0>;
+ compatible = "qcom,pcie-ipq8064-v2";
};
&sata {
diff --git a/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-vr2600v.dts b/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-vr2600v.dts
index 8cc69bca88..2f46b220a8 100644
--- a/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-vr2600v.dts
+++ b/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-vr2600v.dts
@@ -278,7 +278,7 @@
&pcie1 {
status = "okay";
- force_gen1 = <1>;
+ max-link-speed = <1>;
};
&mdio0 {
diff --git a/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-wg2600hp.dts b/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-wg2600hp.dts
index 322968dfdb..8120eee142 100644
--- a/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-wg2600hp.dts
+++ b/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-wg2600hp.dts
@@ -310,7 +310,7 @@
&pcie1 {
status = "okay";
- force_gen1 = <1>;
+ max-link-speed = <1>;
};
&qcom_pinmux {
diff --git a/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-wxr-2533dhp.dts b/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-wxr-2533dhp.dts
index 812757131a..476c6bab40 100644
--- a/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-wxr-2533dhp.dts
+++ b/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-wxr-2533dhp.dts
@@ -381,7 +381,7 @@
&pcie1 {
status = "okay";
- force_gen1 = <1>;
+ max-link-speed = <1>;
};
&qcom_pinmux {
diff --git a/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8065-nbg6817.dts b/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8065-nbg6817.dts
index dab5c4ccd5..781394f75a 100644
--- a/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8065-nbg6817.dts
+++ b/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8065-nbg6817.dts
@@ -214,7 +214,7 @@
reset-gpio = <&qcom_pinmux 48 GPIO_ACTIVE_LOW>;
pinctrl-0 = <&pcie1_pins>;
pinctrl-names = "default";
- force_gen1 = <1>;
+ max-link-speed = <1>;
};
&mdio0 {
diff --git a/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8065-r7800.dts b/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8065-r7800.dts
index 7b272b74ca..89c1a5653c 100644
--- a/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8065-r7800.dts
+++ b/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8065-r7800.dts
@@ -430,7 +430,7 @@
&pcie1 {
status = "okay";
- force_gen1 = <1>;
+ max-link-speed = <1>;
bridge@0,0 {
reg = <0x00000000 0 0 0 0>;
diff --git a/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8065.dtsi b/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8065.dtsi
index b706bfa3a7..ab67d504e6 100644
--- a/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8065.dtsi
+++ b/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8065.dtsi
@@ -46,15 +46,15 @@
};
&pcie0 {
- phy-tx0-term-offset = <0>;
+ compatible = "qcom,pcie-ipq8064-v2";
};
&pcie1 {
- phy-tx0-term-offset = <0>;
+ compatible = "qcom,pcie-ipq8064-v2";
};
&pcie2 {
- phy-tx0-term-offset = <0>;
+ compatible = "qcom,pcie-ipq8064-v2";
};
&sata {
diff --git a/target/linux/ipq806x/patches-5.4/0071-2-PCI-qcom-Fixed-IPQ806x-PCIE-reset-changes.patch b/target/linux/ipq806x/patches-5.4/0071-2-PCI-qcom-Fixed-IPQ806x-PCIE-reset-changes.patch
deleted file mode 100644
index 5bd865a42e..0000000000
--- a/target/linux/ipq806x/patches-5.4/0071-2-PCI-qcom-Fixed-IPQ806x-PCIE-reset-changes.patch
+++ /dev/null
@@ -1,62 +0,0 @@
-From 490d103232287eb51c92c49a4ef8865fd0a9d59e Mon Sep 17 00:00:00 2001
-From: Sham Muthayyan <smuthayy@codeaurora.org>
-Date: Tue, 19 Jul 2016 18:58:18 +0530
-Subject: PCI: qcom: Fixed IPQ806x PCIE reset changes
-
-Change-Id: Ia6590e960b9754b1e8b7a51f318788cd63e9e321
-Signed-off-by: Sham Muthayyan <smuthayy@codeaurora.org>
----
-
---- a/drivers/pci/controller/dwc/pcie-qcom.c
-+++ b/drivers/pci/controller/dwc/pcie-qcom.c
-@@ -92,6 +92,7 @@ struct qcom_pcie_resources_2_1_0 {
- struct reset_control *ahb_reset;
- struct reset_control *por_reset;
- struct reset_control *phy_reset;
-+ struct reset_control *ext_reset;
- struct regulator_bulk_data supplies[QCOM_PCIE_2_1_0_MAX_SUPPLY];
- };
-
-@@ -261,6 +262,10 @@ static int qcom_pcie_get_resources_2_1_0
- if (IS_ERR(res->por_reset))
- return PTR_ERR(res->por_reset);
-
-+ res->ext_reset = devm_reset_control_get(dev, "ext");
-+ if (IS_ERR(res->ext_reset))
-+ return PTR_ERR(res->ext_reset);
-+
- res->phy_reset = devm_reset_control_get_exclusive(dev, "phy");
- return PTR_ERR_OR_ZERO(res->phy_reset);
- }
-@@ -274,6 +279,7 @@ static void qcom_pcie_deinit_2_1_0(struc
- reset_control_assert(res->ahb_reset);
- reset_control_assert(res->por_reset);
- reset_control_assert(res->pci_reset);
-+ reset_control_assert(res->ext_reset);
- clk_disable_unprepare(res->iface_clk);
- clk_disable_unprepare(res->core_clk);
- clk_disable_unprepare(res->phy_clk);
-@@ -290,15 +296,21 @@ static int qcom_pcie_init_2_1_0(struct q
- u32 val;
- int ret;
-
-+ ret = reset_control_assert(res->ahb_reset);
-+ if (ret) {
-+ dev_err(dev, "cannot assert ahb reset\n");
-+ return ret;
-+ }
-+
- ret = regulator_bulk_enable(ARRAY_SIZE(res->supplies), res->supplies);
- if (ret < 0) {
- dev_err(dev, "cannot enable regulators\n");
- return ret;
- }
-
-- ret = reset_control_assert(res->ahb_reset);
-+ ret = reset_control_deassert(res->ext_reset);
- if (ret) {
-- dev_err(dev, "cannot assert ahb reset\n");
-+ dev_err(dev, "cannot assert ext reset\n");
- goto err_assert_ahb;
- }
-
diff --git a/target/linux/ipq806x/patches-5.4/0071-3-PCI-qcom-Fixed-IPQ806x-PCIE-init-changes.patch b/target/linux/ipq806x/patches-5.4/0071-3-PCI-qcom-Fixed-IPQ806x-PCIE-init-changes.patch
deleted file mode 100644
index dde8fbaa7b..0000000000
--- a/target/linux/ipq806x/patches-5.4/0071-3-PCI-qcom-Fixed-IPQ806x-PCIE-init-changes.patch
+++ /dev/null
@@ -1,124 +0,0 @@
-From eddd13215d0f2b549ebc5f0e8796d5b1231f90a0 Mon Sep 17 00:00:00 2001
-From: Sham Muthayyan <smuthayy@codeaurora.org>
-Date: Tue, 19 Jul 2016 19:58:22 +0530
-Subject: PCI: qcom: Fixed IPQ806x PCIE init changes
-
-Change-Id: Ic319b1aec27a47809284759f8fcb6a8815b7cf7e
-Signed-off-by: Sham Muthayyan <smuthayy@codeaurora.org>
----
-
---- a/drivers/pci/controller/dwc/pcie-qcom.c
-+++ b/drivers/pci/controller/dwc/pcie-qcom.c
-@@ -45,7 +45,13 @@
- #define PCIE_CAP_CPL_TIMEOUT_DISABLE 0x10
-
- #define PCIE20_PARF_PHY_CTRL 0x40
-+#define PHY_CTRL_PHY_TX0_TERM_OFFSET_MASK (0x1f << 16)
-+#define PHY_CTRL_PHY_TX0_TERM_OFFSET(x) (x << 16)
-+
- #define PCIE20_PARF_PHY_REFCLK 0x4C
-+#define REF_SSP_EN BIT(16)
-+#define REF_USE_PAD BIT(12)
-+
- #define PCIE20_PARF_DBI_BASE_ADDR 0x168
- #define PCIE20_PARF_SLV_ADDR_SPACE_SIZE 0x16C
- #define PCIE20_PARF_MHI_CLOCK_RESET_CTRL 0x174
-@@ -76,6 +82,18 @@
- #define DBI_RO_WR_EN 1
-
- #define PERST_DELAY_US 1000
-+/* PARF registers */
-+#define PCIE20_PARF_PCS_DEEMPH 0x34
-+#define PCS_DEEMPH_TX_DEEMPH_GEN1(x) (x << 16)
-+#define PCS_DEEMPH_TX_DEEMPH_GEN2_3_5DB(x) (x << 8)
-+#define PCS_DEEMPH_TX_DEEMPH_GEN2_6DB(x) (x << 0)
-+
-+#define PCIE20_PARF_PCS_SWING 0x38
-+#define PCS_SWING_TX_SWING_FULL(x) (x << 8)
-+#define PCS_SWING_TX_SWING_LOW(x) (x << 0)
-+
-+#define PCIE20_PARF_CONFIG_BITS 0x50
-+#define PHY_RX0_EQ(x) (x << 24)
-
- #define PCIE20_v3_PARF_SLV_ADDR_SPACE_SIZE 0x358
- #define SLV_ADDR_SPACE_SZ 0x10000000
-@@ -94,6 +112,7 @@ struct qcom_pcie_resources_2_1_0 {
- struct reset_control *phy_reset;
- struct reset_control *ext_reset;
- struct regulator_bulk_data supplies[QCOM_PCIE_2_1_0_MAX_SUPPLY];
-+ uint8_t phy_tx0_term_offset;
- };
-
- struct qcom_pcie_resources_1_0_0 {
-@@ -173,6 +192,16 @@ struct qcom_pcie {
-
- #define to_qcom_pcie(x) dev_get_drvdata((x)->dev)
-
-+static inline void
-+writel_masked(void __iomem *addr, u32 clear_mask, u32 set_mask)
-+{
-+ u32 val = readl(addr);
-+
-+ val &= ~clear_mask;
-+ val |= set_mask;
-+ writel(val, addr);
-+}
-+
- static void qcom_ep_reset_assert(struct qcom_pcie *pcie)
- {
- gpiod_set_value_cansleep(pcie->reset, 1);
-@@ -266,6 +295,10 @@ static int qcom_pcie_get_resources_2_1_0
- if (IS_ERR(res->ext_reset))
- return PTR_ERR(res->ext_reset);
-
-+ if (of_property_read_u8(dev->of_node, "phy-tx0-term-offset",
-+ &res->phy_tx0_term_offset))
-+ res->phy_tx0_term_offset = 0;
-+
- res->phy_reset = devm_reset_control_get_exclusive(dev, "phy");
- return PTR_ERR_OR_ZERO(res->phy_reset);
- }
-@@ -293,7 +326,6 @@ static int qcom_pcie_init_2_1_0(struct q
- struct qcom_pcie_resources_2_1_0 *res = &pcie->res.v2_1_0;
- struct dw_pcie *pci = pcie->pci;
- struct device *dev = pci->dev;
-- u32 val;
- int ret;
-
- ret = reset_control_assert(res->ahb_reset);
-@@ -350,15 +382,26 @@ static int qcom_pcie_init_2_1_0(struct q
- goto err_deassert_ahb;
- }
-
-- /* enable PCIe clocks and resets */
-- val = readl(pcie->parf + PCIE20_PARF_PHY_CTRL);
-- val &= ~BIT(0);
-- writel(val, pcie->parf + PCIE20_PARF_PHY_CTRL);
--
-- /* enable external reference clock */
-- val = readl(pcie->parf + PCIE20_PARF_PHY_REFCLK);
-- val |= BIT(16);
-- writel(val, pcie->parf + PCIE20_PARF_PHY_REFCLK);
-+ writel_masked(pcie->parf + PCIE20_PARF_PHY_CTRL, BIT(0), 0);
-+
-+ /* Set Tx termination offset */
-+ writel_masked(pcie->parf + PCIE20_PARF_PHY_CTRL,
-+ PHY_CTRL_PHY_TX0_TERM_OFFSET_MASK,
-+ PHY_CTRL_PHY_TX0_TERM_OFFSET(res->phy_tx0_term_offset));
-+
-+ /* PARF programming */
-+ writel(PCS_DEEMPH_TX_DEEMPH_GEN1(0x18) |
-+ PCS_DEEMPH_TX_DEEMPH_GEN2_3_5DB(0x18) |
-+ PCS_DEEMPH_TX_DEEMPH_GEN2_6DB(0x22),
-+ pcie->parf + PCIE20_PARF_PCS_DEEMPH);
-+ writel(PCS_SWING_TX_SWING_FULL(0x78) |
-+ PCS_SWING_TX_SWING_LOW(0x78),
-+ pcie->parf + PCIE20_PARF_PCS_SWING);
-+ writel(PHY_RX0_EQ(0x4), pcie->parf + PCIE20_PARF_CONFIG_BITS);
-+
-+ /* Enable reference clock */
-+ writel_masked(pcie->parf + PCIE20_PARF_PHY_REFCLK,
-+ REF_USE_PAD, REF_SSP_EN);
-
- ret = reset_control_deassert(res->phy_reset);
- if (ret) {
diff --git a/target/linux/ipq806x/patches-5.4/0071-5-PCI-qcom-Programming-the-PCIE-iATU-for-IPQ806x.patch b/target/linux/ipq806x/patches-5.4/0071-5-PCI-qcom-Programming-the-PCIE-iATU-for-IPQ806x.patch
deleted file mode 100644
index f6ebe0c0af..0000000000
--- a/target/linux/ipq806x/patches-5.4/0071-5-PCI-qcom-Programming-the-PCIE-iATU-for-IPQ806x.patch
+++ /dev/null
@@ -1,112 +0,0 @@
-From d27c303e828d7e42f339a459d2abfe30c51698e9 Mon Sep 17 00:00:00 2001
-From: Sham Muthayyan <smuthayy@codeaurora.org>
-Date: Tue, 26 Jul 2016 12:28:31 +0530
-Subject: PCI: qcom: Programming the PCIE iATU for IPQ806x
-
-Resolved PCIE EP detection errors caused due to missing iATU programming.
-
-Change-Id: Ie95c0f8cb940abc0192a8a3c4e825ddba54b72fe
-Signed-off-by: Sham Muthayyan <smuthayy@codeaurora.org>
----
-
---- a/drivers/pci/controller/dwc/pcie-qcom.c
-+++ b/drivers/pci/controller/dwc/pcie-qcom.c
-@@ -76,6 +76,30 @@
- #define PCIE20_CAP_LINK_1 (PCIE20_CAP + 0x14)
- #define PCIE_CAP_LINK1_VAL 0x2FD7F
-
-+#define PCIE20_CAP_LINKCTRLSTATUS (PCIE20_CAP + 0x10)
-+
-+#define PCIE20_AXI_MSTR_RESP_COMP_CTRL0 0x818
-+#define PCIE20_AXI_MSTR_RESP_COMP_CTRL1 0x81c
-+
-+#define PCIE20_PLR_IATU_VIEWPORT 0x900
-+#define PCIE20_PLR_IATU_REGION_OUTBOUND (0x0 << 31)
-+#define PCIE20_PLR_IATU_REGION_INDEX(x) (x << 0)
-+
-+#define PCIE20_PLR_IATU_CTRL1 0x904
-+#define PCIE20_PLR_IATU_TYPE_CFG0 (0x4 << 0)
-+#define PCIE20_PLR_IATU_TYPE_MEM (0x0 << 0)
-+
-+#define PCIE20_PLR_IATU_CTRL2 0x908
-+#define PCIE20_PLR_IATU_ENABLE BIT(31)
-+
-+#define PCIE20_PLR_IATU_LBAR 0x90C
-+#define PCIE20_PLR_IATU_UBAR 0x910
-+#define PCIE20_PLR_IATU_LAR 0x914
-+#define PCIE20_PLR_IATU_LTAR 0x918
-+#define PCIE20_PLR_IATU_UTAR 0x91c
-+
-+#define MSM_PCIE_DEV_CFG_ADDR 0x01000000
-+
- #define PCIE20_PARF_Q2A_FLUSH 0x1AC
-
- #define PCIE20_MISC_CONTROL_1_REG 0x8BC
-@@ -240,6 +264,57 @@ static void qcom_pcie_2_1_0_ltssm_enable
- writel(val, pcie->elbi + PCIE20_ELBI_SYS_CTRL);
- }
-
-+static void qcom_pcie_prog_viewport_cfg0(struct qcom_pcie *pcie, u32 busdev)
-+{
-+ struct pcie_port *pp = &pcie->pci->pp;
-+
-+ /*
-+ * program and enable address translation region 0 (device config
-+ * address space); region type config;
-+ * axi config address range to device config address range
-+ */
-+ writel(PCIE20_PLR_IATU_REGION_OUTBOUND |
-+ PCIE20_PLR_IATU_REGION_INDEX(0),
-+ pcie->pci->dbi_base + PCIE20_PLR_IATU_VIEWPORT);
-+
-+ writel(PCIE20_PLR_IATU_TYPE_CFG0, pcie->pci->dbi_base + PCIE20_PLR_IATU_CTRL1);
-+ writel(PCIE20_PLR_IATU_ENABLE, pcie->pci->dbi_base + PCIE20_PLR_IATU_CTRL2);
-+ writel(pp->cfg0_base, pcie->pci->dbi_base + PCIE20_PLR_IATU_LBAR);
-+ writel((pp->cfg0_base >> 32), pcie->pci->dbi_base + PCIE20_PLR_IATU_UBAR);
-+ writel((pp->cfg0_base + pp->cfg0_size - 1),
-+ pcie->pci->dbi_base + PCIE20_PLR_IATU_LAR);
-+ writel(busdev, pcie->pci->dbi_base + PCIE20_PLR_IATU_LTAR);
-+ writel(0, pcie->pci->dbi_base + PCIE20_PLR_IATU_UTAR);
-+}
-+
-+static void qcom_pcie_prog_viewport_mem2_outbound(struct qcom_pcie *pcie)
-+{
-+ struct pcie_port *pp = &pcie->pci->pp;
-+
-+ /*
-+ * program and enable address translation region 2 (device resource
-+ * address space); region type memory;
-+ * axi device bar address range to device bar address range
-+ */
-+ writel(PCIE20_PLR_IATU_REGION_OUTBOUND |
-+ PCIE20_PLR_IATU_REGION_INDEX(2),
-+ pcie->pci->dbi_base + PCIE20_PLR_IATU_VIEWPORT);
-+
-+ writel(PCIE20_PLR_IATU_TYPE_MEM, pcie->pci->dbi_base + PCIE20_PLR_IATU_CTRL1);
-+ writel(PCIE20_PLR_IATU_ENABLE, pcie->pci->dbi_base + PCIE20_PLR_IATU_CTRL2);
-+ writel(pp->mem_base, pcie->pci->dbi_base + PCIE20_PLR_IATU_LBAR);
-+ writel((pp->mem_base >> 32), pcie->pci->dbi_base + PCIE20_PLR_IATU_UBAR);
-+ writel(pp->mem_base + pp->mem_size - 1,
-+ pcie->pci->dbi_base + PCIE20_PLR_IATU_LAR);
-+ writel(pp->mem_bus_addr, pcie->pci->dbi_base + PCIE20_PLR_IATU_LTAR);
-+ writel(upper_32_bits(pp->mem_bus_addr),
-+ pcie->pci->dbi_base + PCIE20_PLR_IATU_UTAR);
-+
-+ /* 256B PCIE buffer setting */
-+ writel(0x1, pcie->pci->dbi_base + PCIE20_AXI_MSTR_RESP_COMP_CTRL0);
-+ writel(0x1, pcie->pci->dbi_base + PCIE20_AXI_MSTR_RESP_COMP_CTRL1);
-+}
-+
- static int qcom_pcie_get_resources_2_1_0(struct qcom_pcie *pcie)
- {
- struct qcom_pcie_resources_2_1_0 *res = &pcie->res.v2_1_0;
-@@ -437,6 +512,9 @@ static int qcom_pcie_init_2_1_0(struct q
- writel(CFG_BRIDGE_SB_INIT,
- pci->dbi_base + PCIE20_AXI_MSTR_RESP_COMP_CTRL1);
-
-+ qcom_pcie_prog_viewport_cfg0(pcie, MSM_PCIE_DEV_CFG_ADDR);
-+ qcom_pcie_prog_viewport_mem2_outbound(pcie);
-+
- return 0;
-
- err_deassert_ahb:
diff --git a/target/linux/ipq806x/patches-5.4/0071-6-PCI-qcom-Force-GEN1-support.patch b/target/linux/ipq806x/patches-5.4/0071-6-PCI-qcom-Force-GEN1-support.patch
deleted file mode 100644
index 275b7c0915..0000000000
--- a/target/linux/ipq806x/patches-5.4/0071-6-PCI-qcom-Force-GEN1-support.patch
+++ /dev/null
@@ -1,59 +0,0 @@
-From 4910cfd150342ec7b038892262923c725a9c4001 Mon Sep 17 00:00:00 2001
-From: Sham Muthayyan <smuthayy@codeaurora.org>
-Date: Wed, 7 Sep 2016 16:44:28 +0530
-Subject: PCI: qcom: Force GEN1 support
-
-Change-Id: Ica54ddb737d7b851469deab1745f54bf431bd3f0
-Signed-off-by: Sham Muthayyan <smuthayy@codeaurora.org>
----
-
---- a/drivers/pci/controller/dwc/pcie-qcom.c
-+++ b/drivers/pci/controller/dwc/pcie-qcom.c
-@@ -122,6 +122,8 @@
- #define PCIE20_v3_PARF_SLV_ADDR_SPACE_SIZE 0x358
- #define SLV_ADDR_SPACE_SZ 0x10000000
-
-+#define PCIE20_LNK_CONTROL2_LINK_STATUS2 0xA0
-+
- #define QCOM_PCIE_2_1_0_MAX_SUPPLY 3
- struct qcom_pcie_resources_2_1_0 {
- struct clk *iface_clk;
-@@ -212,6 +214,7 @@ struct qcom_pcie {
- struct phy *phy;
- struct gpio_desc *reset;
- const struct qcom_pcie_ops *ops;
-+ uint32_t force_gen1;
- };
-
- #define to_qcom_pcie(x) dev_get_drvdata((x)->dev)
-@@ -504,6 +507,11 @@ static int qcom_pcie_init_2_1_0(struct q
-
- /* wait for clock acquisition */
- usleep_range(1000, 1500);
-+ if (pcie->force_gen1) {
-+ writel_relaxed((readl_relaxed(
-+ pcie->pci->dbi_base + PCIE20_LNK_CONTROL2_LINK_STATUS2) | 1),
-+ pcie->pci->dbi_base + PCIE20_LNK_CONTROL2_LINK_STATUS2);
-+ }
-
-
- /* Set the Max TLP size to 2K, instead of using default of 4K */
-@@ -1340,6 +1348,8 @@ static int qcom_pcie_probe(struct platfo
- struct dw_pcie *pci;
- struct qcom_pcie *pcie;
- int ret;
-+ uint32_t force_gen1 = 0;
-+ struct device_node *np = pdev->dev.of_node;
-
- pcie = devm_kzalloc(dev, sizeof(*pcie), GFP_KERNEL);
- if (!pcie)
-@@ -1370,6 +1380,9 @@ static int qcom_pcie_probe(struct platfo
- goto err_pm_runtime_put;
- }
-
-+ of_property_read_u32(np, "force_gen1", &force_gen1);
-+ pcie->force_gen1 = force_gen1;
-+
- res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "parf");
- pcie->parf = devm_ioremap_resource(dev, res);
- if (IS_ERR(pcie->parf)) {
diff --git a/target/linux/ipq806x/patches-5.4/0071-7-pcie-Set-PCIE-MRRS-and-MPS-to-256B.patch b/target/linux/ipq806x/patches-5.4/0071-7-pcie-Set-PCIE-MRRS-and-MPS-to-256B.patch
deleted file mode 100644
index 51df248c04..0000000000
--- a/target/linux/ipq806x/patches-5.4/0071-7-pcie-Set-PCIE-MRRS-and-MPS-to-256B.patch
+++ /dev/null
@@ -1,69 +0,0 @@
-From edff8f777c6321ca89bb950a382f409c4a126e28 Mon Sep 17 00:00:00 2001
-From: Gokul Sriram Palanisamy <gpalan@codeaurora.org>
-Date: Thu, 15 Dec 2016 17:38:18 +0530
-Subject: pcie: Set PCIE MRRS and MPS to 256B
-
-Set Max Read Request Size and Max Payload Size to 256 bytes,
-per chip team recommendation.
-
-Change-Id: I097004be2ced1b3096ffc10c318aae0b2bb155e8
-Signed-off-by: Gokul Sriram Palanisamy <gpalan@codeaurora.org>
----
- drivers/pci/host/pcie-qcom.c | 37 +++++++++++++++++++++++++++++++++++++
- 1 file changed, 37 insertions(+)
-
-(limited to 'drivers/pci/host/pcie-qcom.c')
-
---- a/drivers/pci/controller/dwc/pcie-qcom.c
-+++ b/drivers/pci/controller/dwc/pcie-qcom.c
-@@ -124,6 +124,14 @@
-
- #define PCIE20_LNK_CONTROL2_LINK_STATUS2 0xA0
-
-+#define __set(v, a, b) (((v) << (b)) & GENMASK(a, b))
-+#define __mask(a, b) (((1 << ((a) + 1)) - 1) & ~((1 << (b)) - 1))
-+#define PCIE20_DEV_CAS 0x78
-+#define PCIE20_MRRS_MASK __mask(14, 12)
-+#define PCIE20_MRRS(x) __set(x, 14, 12)
-+#define PCIE20_MPS_MASK __mask(7, 5)
-+#define PCIE20_MPS(x) __set(x, 7, 5)
-+
- #define QCOM_PCIE_2_1_0_MAX_SUPPLY 3
- struct qcom_pcie_resources_2_1_0 {
- struct clk *iface_clk;
-@@ -1448,6 +1456,35 @@ err_pm_runtime_put:
- return ret;
- }
-
-+static void qcom_pcie_fixup_final(struct pci_dev *dev)
-+{
-+ int cap, err;
-+ u16 ctl, reg_val;
-+
-+ cap = pci_pcie_cap(dev);
-+ if (!cap)
-+ return;
-+
-+ err = pci_read_config_word(dev, cap + PCI_EXP_DEVCTL, &ctl);
-+
-+ if (err)
-+ return;
-+
-+ reg_val = ctl;
-+
-+ if (((reg_val & PCIE20_MRRS_MASK) >> 12) > 1)
-+ reg_val = (reg_val & ~(PCIE20_MRRS_MASK)) | PCIE20_MRRS(0x1);
-+
-+ if (((ctl & PCIE20_MPS_MASK) >> 5) > 1)
-+ reg_val = (reg_val & ~(PCIE20_MPS_MASK)) | PCIE20_MPS(0x1);
-+
-+ err = pci_write_config_word(dev, cap + PCI_EXP_DEVCTL, reg_val);
-+
-+ if (err)
-+ pr_err("pcie config write failed %d\n", err);
-+}
-+DECLARE_PCI_FIXUP_FINAL(PCI_ANY_ID, PCI_ANY_ID, qcom_pcie_fixup_final);
-+
- static const struct of_device_id qcom_pcie_match[] = {
- { .compatible = "qcom,pcie-apq8084", .data = &ops_1_0_0 },
- { .compatible = "qcom,pcie-ipq8064", .data = &ops_2_1_0 },
diff --git a/target/linux/ipq806x/patches-5.4/0071-8-pcie-qcom-Fixed-pcie_phy_clk-branch-issue.patch b/target/linux/ipq806x/patches-5.4/0071-8-pcie-qcom-Fixed-pcie_phy_clk-branch-issue.patch
deleted file mode 100644
index 7cbeb3bed7..0000000000
--- a/target/linux/ipq806x/patches-5.4/0071-8-pcie-qcom-Fixed-pcie_phy_clk-branch-issue.patch
+++ /dev/null
@@ -1,91 +0,0 @@
-From b74bab6186131eea09459eedf5d737645a3559c9 Mon Sep 17 00:00:00 2001
-From: Abhishek Sahu <absahu@codeaurora.org>
-Date: Thu, 22 Dec 2016 11:18:45 +0530
-Subject: pcie: qcom: Fixed pcie_phy_clk branch issue
-
-Following backtraces are observed in PCIe deinit operation.
-
- Hardware name: Qualcomm (Flattened Device Tree)
- (unwind_backtrace) from [] (show_stack+0x10/0x14)
- (show_stack) from [] (dump_stack+0x84/0x98)
- (dump_stack) from [] (warn_slowpath_common+0x9c/0xb8)
- (warn_slowpath_common) from [] (warn_slowpath_fmt+0x30/0x40)
- (warn_slowpath_fmt) from [] (clk_branch_wait+0x114/0x120)
- (clk_branch_wait) from [] (clk_core_disable+0xd0/0x1f4)
- (clk_core_disable) from [] (clk_disable+0x24/0x30)
- (clk_disable) from [] (qcom_pcie_deinit_v0+0x6c/0xb8)
- (qcom_pcie_deinit_v0) from [] (qcom_pcie_host_init+0xe0/0xe8)
- (qcom_pcie_host_init) from [] (dw_pcie_host_init+0x3b0/0x538)
- (dw_pcie_host_init) from [] (qcom_pcie_probe+0x20c/0x2e4)
-
-pcie_phy_clk is generated for PCIe controller itself and the
-GCC controls its branch operation. This error is coming since
-the assert operations turn off the parent clock before branch
-clock. Now this patch moves clk_disable_unprepare before assert
-operations.
-
-Similarly, during probe function, the clock branch operation
-should be done after dessert operation. Currently, it does not
-generate any error since bootloader enables the pcie_phy_clk
-but the same error is coming during probe, if bootloader
-disables pcie_phy_clk.
-
-Change-Id: Ib29c154d10eb64363d9cc982ce5fd8107af5627d
-Signed-off-by: Abhishek Sahu <absahu@codeaurora.org>
----
- drivers/pci/host/pcie-qcom.c | 16 +++++++---------
- 1 file changed, 7 insertions(+), 9 deletions(-)
-
---- a/drivers/pci/controller/dwc/pcie-qcom.c
-+++ b/drivers/pci/controller/dwc/pcie-qcom.c
-@@ -393,6 +393,7 @@ static void qcom_pcie_deinit_2_1_0(struc
- {
- struct qcom_pcie_resources_2_1_0 *res = &pcie->res.v2_1_0;
-
-+ clk_disable_unprepare(res->phy_clk);
- reset_control_assert(res->pci_reset);
- reset_control_assert(res->axi_reset);
- reset_control_assert(res->ahb_reset);
-@@ -401,7 +402,6 @@ static void qcom_pcie_deinit_2_1_0(struc
- reset_control_assert(res->ext_reset);
- clk_disable_unprepare(res->iface_clk);
- clk_disable_unprepare(res->core_clk);
-- clk_disable_unprepare(res->phy_clk);
- clk_disable_unprepare(res->aux_clk);
- clk_disable_unprepare(res->ref_clk);
- regulator_bulk_disable(ARRAY_SIZE(res->supplies), res->supplies);
-@@ -444,12 +444,6 @@ static int qcom_pcie_init_2_1_0(struct q
- goto err_clk_core;
- }
-
-- ret = clk_prepare_enable(res->phy_clk);
-- if (ret) {
-- dev_err(dev, "cannot prepare/enable phy clock\n");
-- goto err_clk_phy;
-- }
--
- ret = clk_prepare_enable(res->aux_clk);
- if (ret) {
- dev_err(dev, "cannot prepare/enable aux clock\n");
-@@ -513,6 +507,12 @@ static int qcom_pcie_init_2_1_0(struct q
- return ret;
- }
-
-+ ret = clk_prepare_enable(res->phy_clk);
-+ if (ret) {
-+ dev_err(dev, "cannot prepare/enable phy clock\n");
-+ goto err_deassert_ahb;
-+ }
-+
- /* wait for clock acquisition */
- usleep_range(1000, 1500);
- if (pcie->force_gen1) {
-@@ -538,8 +538,6 @@ err_deassert_ahb:
- err_clk_ref:
- clk_disable_unprepare(res->aux_clk);
- err_clk_aux:
-- clk_disable_unprepare(res->phy_clk);
--err_clk_phy:
- clk_disable_unprepare(res->core_clk);
- err_clk_core:
- clk_disable_unprepare(res->iface_clk);
diff --git a/target/linux/ipq806x/patches-5.4/0071-9-pcie-qcom-change-duplicate-pci-reset-to-phy-reset.patch b/target/linux/ipq806x/patches-5.4/0071-9-pcie-qcom-change-duplicate-pci-reset-to-phy-reset.patch
deleted file mode 100644
index 3fff78bfd4..0000000000
--- a/target/linux/ipq806x/patches-5.4/0071-9-pcie-qcom-change-duplicate-pci-reset-to-phy-reset.patch
+++ /dev/null
@@ -1,25 +0,0 @@
-From 1a9c48123bd09f75562b6a2ee0f0a7b2d533cd45 Mon Sep 17 00:00:00 2001
-From: Abhishek Sahu <absahu@codeaurora.org>
-Date: Thu, 22 Dec 2016 11:50:49 +0530
-Subject: pcie: qcom: change duplicate pci reset to phy reset
-
-The deinit issues reset_control_assert for pci twice and
-does not contain phy reset.
-
-Change-Id: Iba849963c7e5f9a2a1063f0e2e89635df70b8a99
-Signed-off-by: Abhishek Sahu <absahu@codeaurora.org>
----
- drivers/pci/host/pcie-qcom.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/pci/controller/dwc/pcie-qcom.c
-+++ b/drivers/pci/controller/dwc/pcie-qcom.c
-@@ -394,7 +394,7 @@ static void qcom_pcie_deinit_2_1_0(struc
- struct qcom_pcie_resources_2_1_0 *res = &pcie->res.v2_1_0;
-
- clk_disable_unprepare(res->phy_clk);
-- reset_control_assert(res->pci_reset);
-+ reset_control_assert(res->phy_reset);
- reset_control_assert(res->axi_reset);
- reset_control_assert(res->ahb_reset);
- reset_control_assert(res->por_reset);
diff --git a/target/linux/ipq806x/patches-5.4/085-ipq8064-v1.0-dtsi-additions.patch b/target/linux/ipq806x/patches-5.4/085-ipq8064-v1.0-dtsi-additions.patch
index 9837fb156d..58f6a46e4f 100644
--- a/target/linux/ipq806x/patches-5.4/085-ipq8064-v1.0-dtsi-additions.patch
+++ b/target/linux/ipq806x/patches-5.4/085-ipq8064-v1.0-dtsi-additions.patch
@@ -4,7 +4,7 @@ for the (local) additional contents of qcom-ipq8064.dtsi
--- a/arch/arm/boot/dts/qcom-ipq8064-v1.0.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq8064-v1.0.dtsi
-@@ -56,3 +56,19 @@
+@@ -56,3 +56,7 @@
};
};
};
@@ -12,15 +12,3 @@ for the (local) additional contents of qcom-ipq8064.dtsi
+&CPU_SPC {
+ status = "okay";
+};
-+
-+&pcie0 {
-+ phy-tx0-term-offset = <7>;
-+};
-+
-+&pcie1 {
-+ phy-tx0-term-offset = <7>;
-+};
-+
-+&pcie2 {
-+ phy-tx0-term-offset = <7>;
-+};
diff --git a/target/linux/ipq806x/patches-5.4/0071-1-PCI-qcom-Fixed-IPQ806x-specific-clocks.patch b/target/linux/ipq806x/patches-5.4/093-1-v5.8-ipq806x-PCI-qcom-Add-missing-ipq806x-clocks-in-PCIe-driver.patch
index 3a3e0a0000..7eb79cae4d 100644
--- a/target/linux/ipq806x/patches-5.4/0071-1-PCI-qcom-Fixed-IPQ806x-specific-clocks.patch
+++ b/target/linux/ipq806x/patches-5.4/093-1-v5.8-ipq806x-PCI-qcom-Add-missing-ipq806x-clocks-in-PCIe-driver.patch
@@ -1,11 +1,21 @@
-From 86655aa14304ca88a8ce8847276147dbc1a83238 Mon Sep 17 00:00:00 2001
-From: Sham Muthayyan <smuthayy@codeaurora.org>
-Date: Tue, 19 Jul 2016 18:44:49 +0530
-Subject: PCI: qcom: Fixed IPQ806x specific clocks
+From 8b6f0330b5f9a7543356bfa9e76d580f03aa2c1e Mon Sep 17 00:00:00 2001
+From: Ansuel Smith <ansuelsmth@gmail.com>
+Date: Mon, 15 Jun 2020 23:05:57 +0200
+Subject: PCI: qcom: Add missing ipq806x clocks in PCIe driver
-Change-Id: I488e1bc707d6a22b37a338f41935e3922009ba5e
+Aux and Ref clk are missing in PCIe qcom driver. Add support for this
+optional clks for ipq8064/apq8064 SoC.
+
+Link: https://lore.kernel.org/r/20200615210608.21469-2-ansuelsmth@gmail.com
+Fixes: 82a823833f4e ("PCI: qcom: Add Qualcomm PCIe controller driver")
Signed-off-by: Sham Muthayyan <smuthayy@codeaurora.org>
+Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
+Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
+Reviewed-by: Rob Herring <robh@kernel.org>
+Acked-by: Stanimir Varbanov <svarbanov@mm-sol.com>
---
+ drivers/pci/controller/dwc/pcie-qcom.c | 38 +++++++++++++++++++++++++++++-----
+ 1 file changed, 33 insertions(+), 5 deletions(-)
--- a/drivers/pci/controller/dwc/pcie-qcom.c
+++ b/drivers/pci/controller/dwc/pcie-qcom.c
@@ -22,11 +32,11 @@ Signed-off-by: Sham Muthayyan <smuthayy@codeaurora.org>
if (IS_ERR(res->phy_clk))
return PTR_ERR(res->phy_clk);
-+ res->aux_clk = devm_clk_get(dev, "aux");
++ res->aux_clk = devm_clk_get_optional(dev, "aux");
+ if (IS_ERR(res->aux_clk))
+ return PTR_ERR(res->aux_clk);
+
-+ res->ref_clk = devm_clk_get(dev, "ref");
++ res->ref_clk = devm_clk_get_optional(dev, "ref");
+ if (IS_ERR(res->ref_clk))
+ return PTR_ERR(res->ref_clk);
+
diff --git a/target/linux/ipq806x/patches-5.4/093-2-v5.8-ipq806x-PCI-qcom-Change-duplicate-PCI-reset-to-phy-reset.patch b/target/linux/ipq806x/patches-5.4/093-2-v5.8-ipq806x-PCI-qcom-Change-duplicate-PCI-reset-to-phy-reset.patch
new file mode 100644
index 0000000000..a2d44a4fb0
--- /dev/null
+++ b/target/linux/ipq806x/patches-5.4/093-2-v5.8-ipq806x-PCI-qcom-Change-duplicate-PCI-reset-to-phy-reset.patch
@@ -0,0 +1,72 @@
+From dd58318c019f10bc94db36df66af6c55d4c0cbba Mon Sep 17 00:00:00 2001
+From: Abhishek Sahu <absahu@codeaurora.org>
+Date: Mon, 15 Jun 2020 23:05:59 +0200
+Subject: PCI: qcom: Change duplicate PCI reset to phy reset
+
+The deinit issues reset_control_assert for PCI twice and does not contain
+phy reset.
+
+Link: https://lore.kernel.org/r/20200615210608.21469-4-ansuelsmth@gmail.com
+Signed-off-by: Abhishek Sahu <absahu@codeaurora.org>
+Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
+Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
+Reviewed-by: Rob Herring <robh@kernel.org>
+Acked-by: Stanimir Varbanov <svarbanov@mm-sol.com>
+---
+ drivers/pci/controller/dwc/pcie-qcom.c | 18 ++++++++----------
+ 1 file changed, 8 insertions(+), 10 deletions(-)
+
+--- a/drivers/pci/controller/dwc/pcie-qcom.c
++++ b/drivers/pci/controller/dwc/pcie-qcom.c
+@@ -269,14 +269,14 @@ static void qcom_pcie_deinit_2_1_0(struc
+ {
+ struct qcom_pcie_resources_2_1_0 *res = &pcie->res.v2_1_0;
+
++ clk_disable_unprepare(res->phy_clk);
+ reset_control_assert(res->pci_reset);
+ reset_control_assert(res->axi_reset);
+ reset_control_assert(res->ahb_reset);
+ reset_control_assert(res->por_reset);
+- reset_control_assert(res->pci_reset);
++ reset_control_assert(res->phy_reset);
+ clk_disable_unprepare(res->iface_clk);
+ clk_disable_unprepare(res->core_clk);
+- clk_disable_unprepare(res->phy_clk);
+ clk_disable_unprepare(res->aux_clk);
+ clk_disable_unprepare(res->ref_clk);
+ regulator_bulk_disable(ARRAY_SIZE(res->supplies), res->supplies);
+@@ -314,12 +314,6 @@ static int qcom_pcie_init_2_1_0(struct q
+ goto err_clk_core;
+ }
+
+- ret = clk_prepare_enable(res->phy_clk);
+- if (ret) {
+- dev_err(dev, "cannot prepare/enable phy clock\n");
+- goto err_clk_phy;
+- }
+-
+ ret = clk_prepare_enable(res->aux_clk);
+ if (ret) {
+ dev_err(dev, "cannot prepare/enable aux clock\n");
+@@ -372,6 +366,12 @@ static int qcom_pcie_init_2_1_0(struct q
+ return ret;
+ }
+
++ ret = clk_prepare_enable(res->phy_clk);
++ if (ret) {
++ dev_err(dev, "cannot prepare/enable phy clock\n");
++ goto err_deassert_ahb;
++ }
++
+ /* wait for clock acquisition */
+ usleep_range(1000, 1500);
+
+@@ -389,8 +389,6 @@ err_deassert_ahb:
+ err_clk_ref:
+ clk_disable_unprepare(res->aux_clk);
+ err_clk_aux:
+- clk_disable_unprepare(res->phy_clk);
+-err_clk_phy:
+ clk_disable_unprepare(res->core_clk);
+ err_clk_core:
+ clk_disable_unprepare(res->iface_clk);
diff --git a/target/linux/ipq806x/patches-5.4/093-3-v5.8-ipq806x-PCI-qcom-Add-missing-reset-for-ipq806x.patch b/target/linux/ipq806x/patches-5.4/093-3-v5.8-ipq806x-PCI-qcom-Add-missing-reset-for-ipq806x.patch
new file mode 100644
index 0000000000..e9595dc2a9
--- /dev/null
+++ b/target/linux/ipq806x/patches-5.4/093-3-v5.8-ipq806x-PCI-qcom-Add-missing-reset-for-ipq806x.patch
@@ -0,0 +1,62 @@
+From ee367e2cdd2202b5714982739e684543cd2cee0e Mon Sep 17 00:00:00 2001
+From: Ansuel Smith <ansuelsmth@gmail.com>
+Date: Mon, 15 Jun 2020 23:06:00 +0200
+Subject: PCI: qcom: Add missing reset for ipq806x
+
+Add missing ext reset used by ipq8064 SoC in PCIe qcom driver.
+
+Link: https://lore.kernel.org/r/20200615210608.21469-5-ansuelsmth@gmail.com
+Fixes: 82a823833f4e ("PCI: qcom: Add Qualcomm PCIe controller driver")
+Signed-off-by: Sham Muthayyan <smuthayy@codeaurora.org>
+Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
+Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
+Reviewed-by: Rob Herring <robh@kernel.org>
+Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
+Acked-by: Stanimir Varbanov <svarbanov@mm-sol.com>
+Cc: stable@vger.kernel.org # v4.5+
+---
+ drivers/pci/controller/dwc/pcie-qcom.c | 12 ++++++++++++
+ 1 file changed, 12 insertions(+)
+
+--- a/drivers/pci/controller/dwc/pcie-qcom.c
++++ b/drivers/pci/controller/dwc/pcie-qcom.c
+@@ -92,6 +92,7 @@ struct qcom_pcie_resources_2_1_0 {
+ struct reset_control *ahb_reset;
+ struct reset_control *por_reset;
+ struct reset_control *phy_reset;
++ struct reset_control *ext_reset;
+ struct regulator_bulk_data supplies[QCOM_PCIE_2_1_0_MAX_SUPPLY];
+ };
+
+@@ -261,6 +262,10 @@ static int qcom_pcie_get_resources_2_1_0
+ if (IS_ERR(res->por_reset))
+ return PTR_ERR(res->por_reset);
+
++ res->ext_reset = devm_reset_control_get_optional_exclusive(dev, "ext");
++ if (IS_ERR(res->ext_reset))
++ return PTR_ERR(res->ext_reset);
++
+ res->phy_reset = devm_reset_control_get_exclusive(dev, "phy");
+ return PTR_ERR_OR_ZERO(res->phy_reset);
+ }
+@@ -274,6 +279,7 @@ static void qcom_pcie_deinit_2_1_0(struc
+ reset_control_assert(res->axi_reset);
+ reset_control_assert(res->ahb_reset);
+ reset_control_assert(res->por_reset);
++ reset_control_assert(res->ext_reset);
+ reset_control_assert(res->phy_reset);
+ clk_disable_unprepare(res->iface_clk);
+ clk_disable_unprepare(res->core_clk);
+@@ -332,6 +338,12 @@ static int qcom_pcie_init_2_1_0(struct q
+ goto err_deassert_ahb;
+ }
+
++ ret = reset_control_deassert(res->ext_reset);
++ if (ret) {
++ dev_err(dev, "cannot deassert ext reset\n");
++ goto err_deassert_ahb;
++ }
++
+ /* enable PCIe clocks and resets */
+ val = readl(pcie->parf + PCIE20_PARF_PHY_CTRL);
+ val &= ~BIT(0);
diff --git a/target/linux/ipq806x/patches-5.4/093-4-v5.8-ipq806x-PCI-qcom-Use-bulk-clk-api-and-assert-on-error.patch b/target/linux/ipq806x/patches-5.4/093-4-v5.8-ipq806x-PCI-qcom-Use-bulk-clk-api-and-assert-on-error.patch
new file mode 100644
index 0000000000..4d2da5f768
--- /dev/null
+++ b/target/linux/ipq806x/patches-5.4/093-4-v5.8-ipq806x-PCI-qcom-Use-bulk-clk-api-and-assert-on-error.patch
@@ -0,0 +1,226 @@
+From 6a114526af4689938863bf34976c83bfd279f517 Mon Sep 17 00:00:00 2001
+From: Ansuel Smith <ansuelsmth@gmail.com>
+Date: Mon, 15 Jun 2020 23:06:02 +0200
+Subject: PCI: qcom: Use bulk clk api and assert on error
+
+Rework 2.1.0 revision to use bulk clk api and fix missing assert on
+reset_control_deassert error.
+
+Link: https://lore.kernel.org/r/20200615210608.21469-7-ansuelsmth@gmail.com
+Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
+Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
+Reviewed-by: Rob Herring <robh@kernel.org>
+Acked-by: Stanimir Varbanov <svarbanov@mm-sol.com>
+---
+ drivers/pci/controller/dwc/pcie-qcom.c | 131 ++++++++++++---------------------
+ 1 file changed, 46 insertions(+), 85 deletions(-)
+
+--- a/drivers/pci/controller/dwc/pcie-qcom.c
++++ b/drivers/pci/controller/dwc/pcie-qcom.c
+@@ -81,12 +81,9 @@
+ #define SLV_ADDR_SPACE_SZ 0x10000000
+
+ #define QCOM_PCIE_2_1_0_MAX_SUPPLY 3
++#define QCOM_PCIE_2_1_0_MAX_CLOCKS 5
+ struct qcom_pcie_resources_2_1_0 {
+- struct clk *iface_clk;
+- struct clk *core_clk;
+- struct clk *phy_clk;
+- struct clk *aux_clk;
+- struct clk *ref_clk;
++ struct clk_bulk_data clks[QCOM_PCIE_2_1_0_MAX_CLOCKS];
+ struct reset_control *pci_reset;
+ struct reset_control *axi_reset;
+ struct reset_control *ahb_reset;
+@@ -226,25 +223,21 @@ static int qcom_pcie_get_resources_2_1_0
+ if (ret)
+ return ret;
+
+- res->iface_clk = devm_clk_get(dev, "iface");
+- if (IS_ERR(res->iface_clk))
+- return PTR_ERR(res->iface_clk);
+-
+- res->core_clk = devm_clk_get(dev, "core");
+- if (IS_ERR(res->core_clk))
+- return PTR_ERR(res->core_clk);
+-
+- res->phy_clk = devm_clk_get(dev, "phy");
+- if (IS_ERR(res->phy_clk))
+- return PTR_ERR(res->phy_clk);
+-
+- res->aux_clk = devm_clk_get_optional(dev, "aux");
+- if (IS_ERR(res->aux_clk))
+- return PTR_ERR(res->aux_clk);
+-
+- res->ref_clk = devm_clk_get_optional(dev, "ref");
+- if (IS_ERR(res->ref_clk))
+- return PTR_ERR(res->ref_clk);
++ res->clks[0].id = "iface";
++ res->clks[1].id = "core";
++ res->clks[2].id = "phy";
++ res->clks[3].id = "aux";
++ res->clks[4].id = "ref";
++
++ /* iface, core, phy are required */
++ ret = devm_clk_bulk_get(dev, 3, res->clks);
++ if (ret < 0)
++ return ret;
++
++ /* aux, ref are optional */
++ ret = devm_clk_bulk_get_optional(dev, 2, res->clks + 3);
++ if (ret < 0)
++ return ret;
+
+ res->pci_reset = devm_reset_control_get_exclusive(dev, "pci");
+ if (IS_ERR(res->pci_reset))
+@@ -274,17 +267,13 @@ static void qcom_pcie_deinit_2_1_0(struc
+ {
+ struct qcom_pcie_resources_2_1_0 *res = &pcie->res.v2_1_0;
+
+- clk_disable_unprepare(res->phy_clk);
++ clk_bulk_disable_unprepare(ARRAY_SIZE(res->clks), res->clks);
+ reset_control_assert(res->pci_reset);
+ reset_control_assert(res->axi_reset);
+ reset_control_assert(res->ahb_reset);
+ reset_control_assert(res->por_reset);
+ reset_control_assert(res->ext_reset);
+ reset_control_assert(res->phy_reset);
+- clk_disable_unprepare(res->iface_clk);
+- clk_disable_unprepare(res->core_clk);
+- clk_disable_unprepare(res->aux_clk);
+- clk_disable_unprepare(res->ref_clk);
+ regulator_bulk_disable(ARRAY_SIZE(res->supplies), res->supplies);
+ }
+
+@@ -302,36 +291,6 @@ static int qcom_pcie_init_2_1_0(struct q
+ return ret;
+ }
+
+- ret = reset_control_assert(res->ahb_reset);
+- if (ret) {
+- dev_err(dev, "cannot assert ahb reset\n");
+- goto err_assert_ahb;
+- }
+-
+- ret = clk_prepare_enable(res->iface_clk);
+- if (ret) {
+- dev_err(dev, "cannot prepare/enable iface clock\n");
+- goto err_assert_ahb;
+- }
+-
+- ret = clk_prepare_enable(res->core_clk);
+- if (ret) {
+- dev_err(dev, "cannot prepare/enable core clock\n");
+- goto err_clk_core;
+- }
+-
+- ret = clk_prepare_enable(res->aux_clk);
+- if (ret) {
+- dev_err(dev, "cannot prepare/enable aux clock\n");
+- goto err_clk_aux;
+- }
+-
+- ret = clk_prepare_enable(res->ref_clk);
+- if (ret) {
+- dev_err(dev, "cannot prepare/enable ref clock\n");
+- goto err_clk_ref;
+- }
+-
+ ret = reset_control_deassert(res->ahb_reset);
+ if (ret) {
+ dev_err(dev, "cannot deassert ahb reset\n");
+@@ -341,48 +300,46 @@ static int qcom_pcie_init_2_1_0(struct q
+ ret = reset_control_deassert(res->ext_reset);
+ if (ret) {
+ dev_err(dev, "cannot deassert ext reset\n");
+- goto err_deassert_ahb;
++ goto err_deassert_ext;
+ }
+
+- /* enable PCIe clocks and resets */
+- val = readl(pcie->parf + PCIE20_PARF_PHY_CTRL);
+- val &= ~BIT(0);
+- writel(val, pcie->parf + PCIE20_PARF_PHY_CTRL);
+-
+- /* enable external reference clock */
+- val = readl(pcie->parf + PCIE20_PARF_PHY_REFCLK);
+- val |= BIT(16);
+- writel(val, pcie->parf + PCIE20_PARF_PHY_REFCLK);
+-
+ ret = reset_control_deassert(res->phy_reset);
+ if (ret) {
+ dev_err(dev, "cannot deassert phy reset\n");
+- return ret;
++ goto err_deassert_phy;
+ }
+
+ ret = reset_control_deassert(res->pci_reset);
+ if (ret) {
+ dev_err(dev, "cannot deassert pci reset\n");
+- return ret;
++ goto err_deassert_pci;
+ }
+
+ ret = reset_control_deassert(res->por_reset);
+ if (ret) {
+ dev_err(dev, "cannot deassert por reset\n");
+- return ret;
++ goto err_deassert_por;
+ }
+
+ ret = reset_control_deassert(res->axi_reset);
+ if (ret) {
+ dev_err(dev, "cannot deassert axi reset\n");
+- return ret;
++ goto err_deassert_axi;
+ }
+
+- ret = clk_prepare_enable(res->phy_clk);
+- if (ret) {
+- dev_err(dev, "cannot prepare/enable phy clock\n");
+- goto err_deassert_ahb;
+- }
++ ret = clk_bulk_prepare_enable(ARRAY_SIZE(res->clks), res->clks);
++ if (ret)
++ goto err_clks;
++
++ /* enable PCIe clocks and resets */
++ val = readl(pcie->parf + PCIE20_PARF_PHY_CTRL);
++ val &= ~BIT(0);
++ writel(val, pcie->parf + PCIE20_PARF_PHY_CTRL);
++
++ /* enable external reference clock */
++ val = readl(pcie->parf + PCIE20_PARF_PHY_REFCLK);
++ val |= BIT(16);
++ writel(val, pcie->parf + PCIE20_PARF_PHY_REFCLK);
+
+ /* wait for clock acquisition */
+ usleep_range(1000, 1500);
+@@ -396,15 +353,19 @@ static int qcom_pcie_init_2_1_0(struct q
+
+ return 0;
+
++err_clks:
++ reset_control_assert(res->axi_reset);
++err_deassert_axi:
++ reset_control_assert(res->por_reset);
++err_deassert_por:
++ reset_control_assert(res->pci_reset);
++err_deassert_pci:
++ reset_control_assert(res->phy_reset);
++err_deassert_phy:
++ reset_control_assert(res->ext_reset);
++err_deassert_ext:
++ reset_control_assert(res->ahb_reset);
+ err_deassert_ahb:
+- clk_disable_unprepare(res->ref_clk);
+-err_clk_ref:
+- clk_disable_unprepare(res->aux_clk);
+-err_clk_aux:
+- clk_disable_unprepare(res->core_clk);
+-err_clk_core:
+- clk_disable_unprepare(res->iface_clk);
+-err_assert_ahb:
+ regulator_bulk_disable(ARRAY_SIZE(res->supplies), res->supplies);
+
+ return ret;
diff --git a/target/linux/ipq806x/patches-5.4/093-5-v5.8-ipq806x-PCI-qcom-Define-some-PARF-params-needed-for-ipq8064-SoC.patch b/target/linux/ipq806x/patches-5.4/093-5-v5.8-ipq806x-PCI-qcom-Define-some-PARF-params-needed-for-ipq8064-SoC.patch
new file mode 100644
index 0000000000..ff3f34cbf8
--- /dev/null
+++ b/target/linux/ipq806x/patches-5.4/093-5-v5.8-ipq806x-PCI-qcom-Define-some-PARF-params-needed-for-ipq8064-SoC.patch
@@ -0,0 +1,67 @@
+From 5149901e9e6deca487c01cc434a3ac4125c7b00b Mon Sep 17 00:00:00 2001
+From: Ansuel Smith <ansuelsmth@gmail.com>
+Date: Mon, 15 Jun 2020 23:06:03 +0200
+Subject: PCI: qcom: Define some PARF params needed for ipq8064 SoC
+
+Set some specific value for Tx De-Emphasis, Tx Swing and Rx equalization
+needed on some ipq8064 based device (Netgear R7800 for example). Without
+this the system locks on kernel load.
+
+Link: https://lore.kernel.org/r/20200615210608.21469-8-ansuelsmth@gmail.com
+Fixes: 82a823833f4e ("PCI: qcom: Add Qualcomm PCIe controller driver")
+Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
+Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
+Reviewed-by: Rob Herring <robh@kernel.org>
+Acked-by: Stanimir Varbanov <svarbanov@mm-sol.com>
+Cc: stable@vger.kernel.org # v4.5+
+---
+ drivers/pci/controller/dwc/pcie-qcom.c | 24 ++++++++++++++++++++++++
+ 1 file changed, 24 insertions(+)
+
+--- a/drivers/pci/controller/dwc/pcie-qcom.c
++++ b/drivers/pci/controller/dwc/pcie-qcom.c
+@@ -76,6 +76,18 @@
+ #define DBI_RO_WR_EN 1
+
+ #define PERST_DELAY_US 1000
++/* PARF registers */
++#define PCIE20_PARF_PCS_DEEMPH 0x34
++#define PCS_DEEMPH_TX_DEEMPH_GEN1(x) ((x) << 16)
++#define PCS_DEEMPH_TX_DEEMPH_GEN2_3_5DB(x) ((x) << 8)
++#define PCS_DEEMPH_TX_DEEMPH_GEN2_6DB(x) ((x) << 0)
++
++#define PCIE20_PARF_PCS_SWING 0x38
++#define PCS_SWING_TX_SWING_FULL(x) ((x) << 8)
++#define PCS_SWING_TX_SWING_LOW(x) ((x) << 0)
++
++#define PCIE20_PARF_CONFIG_BITS 0x50
++#define PHY_RX0_EQ(x) ((x) << 24)
+
+ #define PCIE20_v3_PARF_SLV_ADDR_SPACE_SIZE 0x358
+ #define SLV_ADDR_SPACE_SZ 0x10000000
+@@ -282,6 +294,7 @@ static int qcom_pcie_init_2_1_0(struct q
+ struct qcom_pcie_resources_2_1_0 *res = &pcie->res.v2_1_0;
+ struct dw_pcie *pci = pcie->pci;
+ struct device *dev = pci->dev;
++ struct device_node *node = dev->of_node;
+ u32 val;
+ int ret;
+
+@@ -336,6 +349,17 @@ static int qcom_pcie_init_2_1_0(struct q
+ val &= ~BIT(0);
+ writel(val, pcie->parf + PCIE20_PARF_PHY_CTRL);
+
++ if (of_device_is_compatible(node, "qcom,pcie-ipq8064")) {
++ writel(PCS_DEEMPH_TX_DEEMPH_GEN1(24) |
++ PCS_DEEMPH_TX_DEEMPH_GEN2_3_5DB(24) |
++ PCS_DEEMPH_TX_DEEMPH_GEN2_6DB(34),
++ pcie->parf + PCIE20_PARF_PCS_DEEMPH);
++ writel(PCS_SWING_TX_SWING_FULL(120) |
++ PCS_SWING_TX_SWING_LOW(120),
++ pcie->parf + PCIE20_PARF_PCS_SWING);
++ writel(PHY_RX0_EQ(4), pcie->parf + PCIE20_PARF_CONFIG_BITS);
++ }
++
+ /* enable external reference clock */
+ val = readl(pcie->parf + PCIE20_PARF_PHY_REFCLK);
+ val |= BIT(16);
diff --git a/target/linux/ipq806x/patches-5.4/093-6-v5.8-ipq806x-PCI-qcom-Add-support-for-tx-term-offset-for-rev-2_1_0.patch b/target/linux/ipq806x/patches-5.4/093-6-v5.8-ipq806x-PCI-qcom-Add-support-for-tx-term-offset-for-rev-2_1_0.patch
new file mode 100644
index 0000000000..911c18e69d
--- /dev/null
+++ b/target/linux/ipq806x/patches-5.4/093-6-v5.8-ipq806x-PCI-qcom-Add-support-for-tx-term-offset-for-rev-2_1_0.patch
@@ -0,0 +1,55 @@
+From de3c4bf648975ea0b1d344d811e9b0748907b47c Mon Sep 17 00:00:00 2001
+From: Ansuel Smith <ansuelsmth@gmail.com>
+Date: Mon, 15 Jun 2020 23:06:04 +0200
+Subject: PCI: qcom: Add support for tx term offset for rev 2.1.0
+
+Add tx term offset support to pcie qcom driver need in some revision of
+the ipq806x SoC. Ipq8064 needs tx term offset set to 7.
+
+Link: https://lore.kernel.org/r/20200615210608.21469-9-ansuelsmth@gmail.com
+Fixes: 82a823833f4e ("PCI: qcom: Add Qualcomm PCIe controller driver")
+Signed-off-by: Sham Muthayyan <smuthayy@codeaurora.org>
+Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
+Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
+Acked-by: Stanimir Varbanov <svarbanov@mm-sol.com>
+Cc: stable@vger.kernel.org # v4.5+
+---
+ drivers/pci/controller/dwc/pcie-qcom.c | 17 ++++++++++++++++-
+ 1 file changed, 16 insertions(+), 1 deletion(-)
+
+--- a/drivers/pci/controller/dwc/pcie-qcom.c
++++ b/drivers/pci/controller/dwc/pcie-qcom.c
+@@ -45,7 +45,13 @@
+ #define PCIE_CAP_CPL_TIMEOUT_DISABLE 0x10
+
+ #define PCIE20_PARF_PHY_CTRL 0x40
++#define PHY_CTRL_PHY_TX0_TERM_OFFSET_MASK GENMASK(20, 16)
++#define PHY_CTRL_PHY_TX0_TERM_OFFSET(x) ((x) << 16)
++
+ #define PCIE20_PARF_PHY_REFCLK 0x4C
++#define PHY_REFCLK_SSP_EN BIT(16)
++#define PHY_REFCLK_USE_PAD BIT(12)
++
+ #define PCIE20_PARF_DBI_BASE_ADDR 0x168
+ #define PCIE20_PARF_SLV_ADDR_SPACE_SIZE 0x16C
+ #define PCIE20_PARF_MHI_CLOCK_RESET_CTRL 0x174
+@@ -360,9 +366,18 @@ static int qcom_pcie_init_2_1_0(struct q
+ writel(PHY_RX0_EQ(4), pcie->parf + PCIE20_PARF_CONFIG_BITS);
+ }
+
++ if (of_device_is_compatible(node, "qcom,pcie-ipq8064")) {
++ /* set TX termination offset */
++ val = readl(pcie->parf + PCIE20_PARF_PHY_CTRL);
++ val &= ~PHY_CTRL_PHY_TX0_TERM_OFFSET_MASK;
++ val |= PHY_CTRL_PHY_TX0_TERM_OFFSET(7);
++ writel(val, pcie->parf + PCIE20_PARF_PHY_CTRL);
++ }
++
+ /* enable external reference clock */
+ val = readl(pcie->parf + PCIE20_PARF_PHY_REFCLK);
+- val |= BIT(16);
++ val &= ~PHY_REFCLK_USE_PAD;
++ val |= PHY_REFCLK_SSP_EN;
+ writel(val, pcie->parf + PCIE20_PARF_PHY_REFCLK);
+
+ /* wait for clock acquisition */
diff --git a/target/linux/ipq806x/patches-5.4/093-7-v5.8-ipq806x-PCI-qcom-Add-ipq8064-rev2-variant.patch b/target/linux/ipq806x/patches-5.4/093-7-v5.8-ipq806x-PCI-qcom-Add-ipq8064-rev2-variant.patch
new file mode 100644
index 0000000000..4e8fa41f35
--- /dev/null
+++ b/target/linux/ipq806x/patches-5.4/093-7-v5.8-ipq806x-PCI-qcom-Add-ipq8064-rev2-variant.patch
@@ -0,0 +1,36 @@
+From 8df093fe2ae1717389df0dcdc620c02cc35abb21 Mon Sep 17 00:00:00 2001
+From: Ansuel Smith <ansuelsmth@gmail.com>
+Date: Mon, 15 Jun 2020 23:06:05 +0200
+Subject: PCI: qcom: Add ipq8064 rev2 variant
+
+Ipq8064-v2 have tx term offset set to 0. Introduce this variant to permit
+different offset based on the revision.
+
+Link: https://lore.kernel.org/r/20200615210608.21469-10-ansuelsmth@gmail.com
+Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
+Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
+Acked-by: Stanimir Varbanov <svarbanov@mm-sol.com>
+---
+ drivers/pci/controller/dwc/pcie-qcom.c | 4 +++-
+ 1 file changed, 3 insertions(+), 1 deletion(-)
+
+--- a/drivers/pci/controller/dwc/pcie-qcom.c
++++ b/drivers/pci/controller/dwc/pcie-qcom.c
+@@ -355,7 +355,8 @@ static int qcom_pcie_init_2_1_0(struct q
+ val &= ~BIT(0);
+ writel(val, pcie->parf + PCIE20_PARF_PHY_CTRL);
+
+- if (of_device_is_compatible(node, "qcom,pcie-ipq8064")) {
++ if (of_device_is_compatible(node, "qcom,pcie-ipq8064") ||
++ of_device_is_compatible(node, "qcom,pcie-ipq8064-v2")) {
+ writel(PCS_DEEMPH_TX_DEEMPH_GEN1(24) |
+ PCS_DEEMPH_TX_DEEMPH_GEN2_3_5DB(24) |
+ PCS_DEEMPH_TX_DEEMPH_GEN2_6DB(34),
+@@ -1315,6 +1316,7 @@ err_pm_runtime_put:
+ static const struct of_device_id qcom_pcie_match[] = {
+ { .compatible = "qcom,pcie-apq8084", .data = &ops_1_0_0 },
+ { .compatible = "qcom,pcie-ipq8064", .data = &ops_2_1_0 },
++ { .compatible = "qcom,pcie-ipq8064-v2", .data = &ops_2_1_0 },
+ { .compatible = "qcom,pcie-apq8064", .data = &ops_2_1_0 },
+ { .compatible = "qcom,pcie-msm8996", .data = &ops_2_3_2 },
+ { .compatible = "qcom,pcie-ipq8074", .data = &ops_2_3_3 },
diff --git a/target/linux/ipq806x/patches-5.4/093-8-v5.8-ipq806x-PCI-qcom-Support-pci-speed-set-for-ipq806x.patch b/target/linux/ipq806x/patches-5.4/093-8-v5.8-ipq806x-PCI-qcom-Support-pci-speed-set-for-ipq806x.patch
new file mode 100644
index 0000000000..9f60f14619
--- /dev/null
+++ b/target/linux/ipq806x/patches-5.4/093-8-v5.8-ipq806x-PCI-qcom-Support-pci-speed-set-for-ipq806x.patch
@@ -0,0 +1,74 @@
+From 51ed2c2b60265006bde7531d10993cf24def0aee Mon Sep 17 00:00:00 2001
+From: Sham Muthayyan <smuthayy@codeaurora.org>
+Date: Mon, 15 Jun 2020 23:06:07 +0200
+Subject: PCI: qcom: Support pci speed set for ipq806x
+
+Some SoC based on ipq8064/5 needs to be limited to pci GEN1 speed due to
+some hardware limitations. Add support for speed setting defined by the
+max-link-speed binding. If not defined the max speed is set to GEN2 by
+default.
+
+Link: https://lore.kernel.org/r/20200615210608.21469-12-ansuelsmth@gmail.com
+Signed-off-by: Sham Muthayyan <smuthayy@codeaurora.org>
+Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
+Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
+Reviewed-by: Rob Herring <robh@kernel.org>
+Acked-by: Stanimir Varbanov <svarbanov@mm-sol.com>
+---
+
+Backported with light changes:
+* One include is missing in kernel 5.4
+
+ drivers/pci/controller/dwc/pcie-qcom.c | 13 +++++++++++++
+ 1 file changed, 13 insertions(+)
+
+--- a/drivers/pci/controller/dwc/pcie-qcom.c
++++ b/drivers/pci/controller/dwc/pcie-qcom.c
+@@ -27,6 +27,7 @@
+ #include <linux/slab.h>
+ #include <linux/types.h>
+
++#include "../../pci.h"
+ #include "pcie-designware.h"
+
+ #define PCIE20_PARF_SYS_CTRL 0x00
+@@ -98,6 +99,8 @@
+ #define PCIE20_v3_PARF_SLV_ADDR_SPACE_SIZE 0x358
+ #define SLV_ADDR_SPACE_SZ 0x10000000
+
++#define PCIE20_LNK_CONTROL2_LINK_STATUS2 0xa0
++
+ #define QCOM_PCIE_2_1_0_MAX_SUPPLY 3
+ #define QCOM_PCIE_2_1_0_MAX_CLOCKS 5
+ struct qcom_pcie_resources_2_1_0 {
+@@ -184,6 +187,7 @@ struct qcom_pcie {
+ struct phy *phy;
+ struct gpio_desc *reset;
+ const struct qcom_pcie_ops *ops;
++ int gen;
+ };
+
+ #define to_qcom_pcie(x) dev_get_drvdata((x)->dev)
+@@ -384,6 +388,11 @@ static int qcom_pcie_init_2_1_0(struct q
+ /* wait for clock acquisition */
+ usleep_range(1000, 1500);
+
++ if (pcie->gen == 1) {
++ val = readl(pci->dbi_base + PCIE20_LNK_CONTROL2_LINK_STATUS2);
++ val |= PCI_EXP_LNKSTA_CLS_2_5GB;
++ writel(val, pci->dbi_base + PCIE20_LNK_CONTROL2_LINK_STATUS2);
++ }
+
+ /* Set the Max TLP size to 2K, instead of using default of 4K */
+ writel(CFG_REMOTE_RD_REQ_BRIDGE_SIZE_2K,
+@@ -1248,6 +1257,10 @@ static int qcom_pcie_probe(struct platfo
+ goto err_pm_runtime_put;
+ }
+
++ pcie->gen = of_pci_get_max_link_speed(pdev->dev.of_node);
++ if (pcie->gen < 0)
++ pcie->gen = 2;
++
+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "parf");
+ pcie->parf = devm_ioremap_resource(dev, res);
+ if (IS_ERR(pcie->parf)) {