ramips: add WHR-1166 support

Signed-off-by: John Crispin <blogic@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@41447 3c298f89-4303-0410-b956-a3cf2f4a3e73

5 files changed, 148 insertions, 2 deletions

diff --git a/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom b/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom
index 904afd1a41..3ed0fbb670 100644
--- a/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom
+++ b/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom
@@ -110,6 +110,7 @@ case "$FIRMWARE" in
 	whr-g300n | \
 	whr-300hp2 | \
 	whr-600d | \
+	whr-1166d | \
 	wl-330n | \
 	wl-330n3g | \
 	wl-351 | \
@@ -141,7 +142,7 @@ case "$FIRMWARE" in
 	cy-swr1100)
 		rt2x00_eeprom_extract "factory" 8192 512
 		;;
-	rt-n56u | whr-600d)
+	rt-n56u | whr-600d | whr-1166d)
 		rt2x00_eeprom_extract "factory" 32768 512
 		;;
 	esac
diff --git a/target/linux/ramips/base-files/etc/uci-defaults/01_leds b/target/linux/ramips/base-files/etc/uci-defaults/01_leds
index c5e380cbc6..c2f768b8a3 100755
--- a/target/linux/ramips/base-files/etc/uci-defaults/01_leds
+++ b/target/linux/ramips/base-files/etc/uci-defaults/01_leds
@@ -176,7 +176,8 @@ case $board in
 		set_wifi_led "asus:blue:wifi"
 		;;
 	whr-300hp2 |\
-	whr-600d)
+	whr-600d |\
+	whr-1166d)
 		ucidef_set_led_default "power" "power" "buffalo:green:power" "1"
 		ucidef_set_led_default "router" "router" "buffalo:green:router" "1"
 		;;
diff --git a/target/linux/ramips/base-files/lib/ramips.sh b/target/linux/ramips/base-files/lib/ramips.sh
index 5d897fc521..697599341b 100755
--- a/target/linux/ramips/base-files/lib/ramips.sh
+++ b/target/linux/ramips/base-files/lib/ramips.sh
@@ -241,6 +241,9 @@ ramips_board_detect() {
 	*"WHR-600D")
 		name="whr-600d"
 		;;
+	*"WHR-1166D")
+		name="whr-1166d"
+		;;
 	*"WHR-G300N")
 		name="whr-g300n"
 		;;
diff --git a/target/linux/ramips/dts/WHR-1166D.dts b/target/linux/ramips/dts/WHR-1166D.dts
new file mode 100644
index 0000000000..47e0b1b6ed
--- /dev/null
+++ b/target/linux/ramips/dts/WHR-1166D.dts
@@ -0,0 +1,138 @@
+/dts-v1/;
+
+/include/ "mt7620a.dtsi"
+
+/ {
+	compatible = "ralink,mt7620a-soc";
+	model = "Buffalo WHR-1166D";
+
+	palmbus@10000000 {
+		gpio2: gpio@660 {
+			status = "okay";
+		};
+
+		spi@b00 {
+			status = "okay";
+
+			m25p80@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "en25q64";
+				reg = <0 0>;
+				linux,modalias = "m25p80", "mx25l6405d";
+				spi-max-frequency = <10000000>;
+
+				partition@0 {
+					label = "u-boot";
+					reg = <0x0 0x30000>;
+					read-only;
+				};
+
+				partition@30000 {
+					label = "u-boot-env";
+					reg = <0x30000 0x10000>;
+					read-only;
+				};
+
+				factory: partition@40000 {
+					label = "factory";
+					reg = <0x40000 0x10000>;
+					read-only;
+				};
+
+				partition@50000 {
+					label = "firmware";
+					reg = <0x50000 0xeb0000>;
+				};
+
+				partition@e00000 {
+					label = "usercfg";
+					reg = <0xe00000 0x100000>;
+				};
+			};
+		};
+	};
+
+	pinctrl {
+		state_default: pinctrl0 {
+			gpio {
+				ralink,group = "i2c", "uartf", "rgmii1", "rgmii2", "wled", "nd_sd";
+				ralink,function = "gpio";
+			};
+		};
+	};
+
+	ethernet@10100000 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&ephy_pins>;
+
+		ralink,port-map = "llllw";
+	};
+
+	gsw@10110000 {
+		ralink,port4 = "ephy";
+	};
+
+	pcie@10140000 {
+		status = "okay";
+	};
+	
+	gpio-leds {
+		compatible = "gpio-leds";
+		power {
+			label = "buffalo:red:power";
+			gpios = <&gpio0 7 1>;
+		};
+		status {
+			label = "buffalo:green:status";
+			gpios = <&gpio0 8 1>;
+		};
+		power2 {
+			label = "buffalo:green:power";
+			gpios = <&gpio0 9 1>;
+		};
+		status2 {
+			label = "buffalo:orange:status";
+			gpios = <&gpio0 10 1>;
+		};
+		internet {
+			label = "buffalo:green:internet";
+			gpios = <&gpio2 17 1>;
+		};
+		router {
+			label = "buffalo:green:router";
+			gpios = <&gpio2 18 1>;
+		};
+		router2 {
+			label = "buffalo:orange:router";
+			gpios = <&gpio2 19 1>;
+		};
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		poll-interval = <20>;
+		s1 {
+			label = "reset";
+			gpios = <&gpio2 12 1>;
+			linux,code = <0x100>;
+		};
+		s2 {
+			label = "aoss";
+			gpios = <&gpio2 13 1>;
+			linux,code = <0x101>;
+		};
+		s3 {
+			label = "ap";
+			gpios = <&gpio2 14 1>;
+			linux,code = <0x102>;
+		};
+		s4 {
+			label = "bridge";
+			gpios = <&gpio2 15 1>;
+			linux,code = <0x103>;
+		};
+	};
+};
diff --git a/target/linux/ramips/image/Makefile b/target/linux/ramips/image/Makefile
index 1b342deb7a..ec3ef75de3 100644
--- a/target/linux/ramips/image/Makefile
+++ b/target/linux/ramips/image/Makefile
@@ -705,6 +705,8 @@ Image/Build/Profile/RP-N53=$(call BuildFirmware/Default8M/$(1),$(1),rp_n53,RP-N5
 whr_300hp2_mtd_size=7012352
 Image/Build/Profile/WHR300HP2=$(call BuildFirmware/CustomFlash/$(1),$(1),whr-300hp2,WHR-300HP2,$(whr_300hp2_mtd_size))
 Image/Build/Profile/WHR600D=$(call BuildFirmware/CustomFlash/$(1),$(1),whr-600d,WHR-600D,$(whr_300hp2_mtd_size))
+whr_1166d_mtd_size=15400960
+Image/Build/Profile/WHR1166D=$(call BuildFirmware/CustomFlash/$(1),$(1),whr-1166d,WHR-1166D,$(whr_1166hd_mtd_size))
 dlink810l_mtd_size=6881280
 Image/Build/Profile/DIR-810L=$(call BuildFirmware/CustomFlash/$(1),$(1),dir-810l,DIR-810L,$(dlink810l_mtd_size))
 na930_mtd_size=20971520
@@ -720,6 +722,7 @@ define Image/Build/Profile/Default
 	$(call Image/Build/Profile/DIR-810L,$(1))
 	$(call Image/Build/Profile/WHR300HP2,$(1))
 	$(call Image/Build/Profile/WHR600D,$(1))
+	$(call Image/Build/Profile/WHR1166D,$(1))
 	$(call Image/Build/Profile/NA930,$(1))
 endef
 endif