1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
|
From 547c653b64022618250ca9c7c30151927509ae98 Mon Sep 17 00:00:00 2001
From: Arnaud Ebalard <arno@natisbad.org>
Date: Sat, 22 Nov 2014 00:46:39 +0100
Subject: arm: mvebu: define and use common Armada XP SPI pinctrl setting
This patch defines common Armada XP pinctrl settings in armada-xp.dtsi
for the supported SPI interface (MPP36-39) and use it as default
for Armada XP spi interface. That being done, it removes the now
redundant definitions in armada-xp-axpwifiap.dts.
Note: this patch has the potential to break out-of-tree users w/o
specific pinctrl settings for their spi interfaces if the default
above does not match their config (i.e. if they do not use CS0).
Acked-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Arnaud Ebalard <arno@natisbad.org>
Link: https://lkml.kernel.org/r/d404b7abd80ee5a0fd8e8d3586d33cd37740d589.1416613429.git.arno@natisbad.org
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
--- a/arch/arm/boot/dts/armada-xp-axpwifiap.dts
+++ b/arch/arm/boot/dts/armada-xp-axpwifiap.dts
@@ -100,8 +100,6 @@
spi0: spi@10600 {
status = "okay";
- pinctrl-0 = <&pmx_spi>;
- pinctrl-names = "default";
spi-flash@0 {
#address-cells = <1>;
@@ -138,11 +136,6 @@
marvell,function = "gpio";
};
- pmx_spi: pmx-spi {
- marvell,pins = "mpp36", "mpp37", "mpp38", "mpp39";
- marvell,function = "spi";
- };
-
pmx_phy_int: pmx-phy-int {
marvell,pins = "mpp32";
marvell,function = "gpio";
--- a/arch/arm/boot/dts/armada-xp.dtsi
+++ b/arch/arm/boot/dts/armada-xp.dtsi
@@ -43,6 +43,11 @@
wt-override;
};
+ spi0: spi@10600 {
+ pinctrl-0 = <&spi0_pins>;
+ pinctrl-names = "default";
+ };
+
i2c0: i2c@11000 {
compatible = "marvell,mv78230-i2c", "marvell,mv64xxx-i2c";
reg = <0x11000 0x100>;
@@ -248,6 +253,12 @@
marvell,function = "sd0";
};
+ spi0_pins: spi0-pins {
+ marvell,pins = "mpp36", "mpp37",
+ "mpp38", "mpp39";
+ marvell,function = "spi";
+ };
+
uart2_pins: uart2-pins {
marvell,pins = "mpp42", "mpp43";
marvell,function = "uart2";
|
