1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
|
From 5130d7fdc237418537e377b951dd388723de1502 Mon Sep 17 00:00:00 2001
From: Phil Elwell <phil@raspberrypi.org>
Date: Mon, 22 Jun 2015 14:23:03 +0100
Subject: [PATCH 090/203] i2c-bcm2708/BCM270X_DT: Add support for I2C2
The third I2C bus (I2C2) is normally reserved for HDMI use. Careless
use of this bus can break an attached display - use with caution.
It is recommended to disable accesses by VideoCore by setting
hdmi_ignore_edid=1 or hdmi_edid_file=1 in config.txt.
The interface is disabled by default - enable using the
i2c2_iknowwhatimdoing DT parameter.
---
arch/arm/boot/dts/bcm2708-rpi-b-plus.dts | 6 ++++++
arch/arm/boot/dts/bcm2708-rpi-b.dts | 6 ++++++
arch/arm/boot/dts/bcm2708-rpi-cm.dts | 6 ++++++
arch/arm/boot/dts/bcm2708_common.dtsi | 14 ++++++++++++++
arch/arm/boot/dts/bcm2709-rpi-2-b.dts | 6 ++++++
drivers/i2c/busses/i2c-bcm2708.c | 5 ++++-
6 files changed, 42 insertions(+), 1 deletion(-)
--- a/arch/arm/boot/dts/bcm2708-rpi-b-plus.dts
+++ b/arch/arm/boot/dts/bcm2708-rpi-b-plus.dts
@@ -75,6 +75,10 @@
clock-frequency = <100000>;
};
+&i2c2 {
+ clock-frequency = <100000>;
+};
+
&i2s {
#sound-dai-cells = <0>;
pinctrl-names = "default";
@@ -103,8 +107,10 @@
spi = <&spi0>,"status";
i2c0 = <&i2c0>,"status";
i2c1 = <&i2c1>,"status";
+ i2c2_iknowwhatimdoing = <&i2c2>,"status";
i2c0_baudrate = <&i2c0>,"clock-frequency:0";
i2c1_baudrate = <&i2c1>,"clock-frequency:0";
+ i2c2_baudrate = <&i2c2>,"clock-frequency:0";
core_freq = <&clk_core>,"clock-frequency:0";
act_led_gpio = <&act_led>,"gpios:4";
--- a/arch/arm/boot/dts/bcm2708-rpi-b.dts
+++ b/arch/arm/boot/dts/bcm2708-rpi-b.dts
@@ -75,6 +75,10 @@
clock-frequency = <100000>;
};
+&i2c2 {
+ clock-frequency = <100000>;
+};
+
&i2s {
#sound-dai-cells = <0>;
pinctrl-names = "default";
@@ -97,8 +101,10 @@
spi = <&spi0>,"status";
i2c0 = <&i2c0>,"status";
i2c1 = <&i2c1>,"status";
+ i2c2_iknowwhatimdoing = <&i2c2>,"status";
i2c0_baudrate = <&i2c0>,"clock-frequency:0";
i2c1_baudrate = <&i2c1>,"clock-frequency:0";
+ i2c2_baudrate = <&i2c2>,"clock-frequency:0";
core_freq = <&clk_core>,"clock-frequency:0";
act_led_gpio = <&act_led>,"gpios:4";
--- a/arch/arm/boot/dts/bcm2708-rpi-cm.dts
+++ b/arch/arm/boot/dts/bcm2708-rpi-cm.dts
@@ -65,6 +65,10 @@
clock-frequency = <100000>;
};
+&i2c2 {
+ clock-frequency = <100000>;
+};
+
&i2s {
#sound-dai-cells = <0>;
pinctrl-names = "default";
@@ -79,8 +83,10 @@
spi = <&spi0>,"status";
i2c0 = <&i2c0>,"status";
i2c1 = <&i2c1>,"status";
+ i2c2_iknowwhatimdoing = <&i2c2>,"status";
i2c0_baudrate = <&i2c0>,"clock-frequency:0";
i2c1_baudrate = <&i2c1>,"clock-frequency:0";
+ i2c2_baudrate = <&i2c2>,"clock-frequency:0";
core_freq = <&clk_core>,"clock-frequency:0";
};
};
--- a/arch/arm/boot/dts/bcm2708_common.dtsi
+++ b/arch/arm/boot/dts/bcm2708_common.dtsi
@@ -20,6 +20,7 @@
uart1 = &uart1;
mmc = &mmc;
i2c1 = &i2c1;
+ i2c2 = &i2c2;
usb = &usb;
leds = &leds;
fb = &fb;
@@ -179,6 +180,19 @@
interrupts = <2 21>;
clocks = <&clk_i2c>;
#address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c2: i2c@7e805000 {
+ // Beware - this is shared with the HDMI module.
+ // Careless use may break (really) your display.
+ // Caveat emptor.
+ compatible = "brcm,bcm2708-i2c";
+ reg = <0x7e805000 0x1000>;
+ interrupts = <2 21>;
+ clocks = <&clk_i2c>;
+ #address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
--- a/arch/arm/boot/dts/bcm2709-rpi-2-b.dts
+++ b/arch/arm/boot/dts/bcm2709-rpi-2-b.dts
@@ -75,6 +75,10 @@
clock-frequency = <100000>;
};
+&i2c2 {
+ clock-frequency = <100000>;
+};
+
&i2s {
#sound-dai-cells = <0>;
pinctrl-names = "default";
@@ -103,8 +107,10 @@
spi = <&spi0>,"status";
i2c0 = <&i2c0>,"status";
i2c1 = <&i2c1>,"status";
+ i2c2_iknowwhatimdoing = <&i2c2>,"status";
i2c0_baudrate = <&i2c0>,"clock-frequency:0";
i2c1_baudrate = <&i2c1>,"clock-frequency:0";
+ i2c2_baudrate = <&i2c2>,"clock-frequency:0";
core_freq = <&clk_core>,"clock-frequency:0";
act_led_gpio = <&act_led>,"gpios:4";
--- a/drivers/i2c/busses/i2c-bcm2708.c
+++ b/drivers/i2c/busses/i2c-bcm2708.c
@@ -407,8 +407,11 @@ static int bcm2708_i2c_probe(struct plat
case 1:
adap->class = I2C_CLASS_DDC;
break;
+ case 2:
+ adap->class = I2C_CLASS_DDC;
+ break;
default:
- dev_err(&pdev->dev, "can only bind to BSC 0 or 1\n");
+ dev_err(&pdev->dev, "can only bind to BSC 0, 1 or 2\n");
err = -ENXIO;
goto out_free_bi;
}
|
