diff options
Diffstat (limited to 'target/linux/generic/files/include/linux')
12 files changed, 922 insertions, 0 deletions
diff --git a/target/linux/generic/files/include/linux/ar8216_platform.h b/target/linux/generic/files/include/linux/ar8216_platform.h new file mode 100644 index 0000000..d70f11a --- /dev/null +++ b/target/linux/generic/files/include/linux/ar8216_platform.h @@ -0,0 +1,133 @@ +/* + * AR8216 switch driver platform data + * + * Copyright (C) 2012 Gabor Juhos <juhosg@openwrt.org> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef AR8216_PLATFORM_H +#define AR8216_PLATFORM_H + +enum ar8327_pad_mode { + AR8327_PAD_NC = 0, + AR8327_PAD_MAC2MAC_MII, + AR8327_PAD_MAC2MAC_GMII, + AR8327_PAD_MAC_SGMII, + AR8327_PAD_MAC2PHY_MII, + AR8327_PAD_MAC2PHY_GMII, + AR8327_PAD_MAC_RGMII, + AR8327_PAD_PHY_GMII, + AR8327_PAD_PHY_RGMII, + AR8327_PAD_PHY_MII, +}; + +enum ar8327_clk_delay_sel { + AR8327_CLK_DELAY_SEL0 = 0, + AR8327_CLK_DELAY_SEL1, + AR8327_CLK_DELAY_SEL2, + AR8327_CLK_DELAY_SEL3, +}; + +struct ar8327_pad_cfg { + enum ar8327_pad_mode mode; + bool rxclk_sel; + bool txclk_sel; + bool pipe_rxclk_sel; + bool txclk_delay_en; + bool rxclk_delay_en; + bool sgmii_delay_en; + enum ar8327_clk_delay_sel txclk_delay_sel; + enum ar8327_clk_delay_sel rxclk_delay_sel; + bool mac06_exchange_en; +}; + +enum ar8327_port_speed { + AR8327_PORT_SPEED_10 = 0, + AR8327_PORT_SPEED_100, + AR8327_PORT_SPEED_1000, +}; + +struct ar8327_port_cfg { + int force_link:1; + enum ar8327_port_speed speed; + int txpause:1; + int rxpause:1; + int duplex:1; +}; + +struct ar8327_sgmii_cfg { + u32 sgmii_ctrl; + bool serdes_aen; +}; + +struct ar8327_led_cfg { + u32 led_ctrl0; + u32 led_ctrl1; + u32 led_ctrl2; + u32 led_ctrl3; + bool open_drain; +}; + +enum ar8327_led_num { + AR8327_LED_PHY0_0 = 0, + AR8327_LED_PHY0_1, + AR8327_LED_PHY0_2, + AR8327_LED_PHY1_0, + AR8327_LED_PHY1_1, + AR8327_LED_PHY1_2, + AR8327_LED_PHY2_0, + AR8327_LED_PHY2_1, + AR8327_LED_PHY2_2, + AR8327_LED_PHY3_0, + AR8327_LED_PHY3_1, + AR8327_LED_PHY3_2, + AR8327_LED_PHY4_0, + AR8327_LED_PHY4_1, + AR8327_LED_PHY4_2, +}; + +enum ar8327_led_mode { + AR8327_LED_MODE_HW = 0, + AR8327_LED_MODE_SW, +}; + +struct ar8327_led_info { + const char *name; + const char *default_trigger; + bool active_low; + enum ar8327_led_num led_num; + enum ar8327_led_mode mode; +}; + +#define AR8327_LED_INFO(_led, _mode, _name) { \ + .name = (_name), \ + .led_num = AR8327_LED_ ## _led, \ + .mode = AR8327_LED_MODE_ ## _mode \ +} + +struct ar8327_platform_data { + struct ar8327_pad_cfg *pad0_cfg; + struct ar8327_pad_cfg *pad5_cfg; + struct ar8327_pad_cfg *pad6_cfg; + struct ar8327_sgmii_cfg *sgmii_cfg; + struct ar8327_port_cfg port0_cfg; + struct ar8327_port_cfg port6_cfg; + struct ar8327_led_cfg *led_cfg; + + int (*get_port_link)(unsigned port); + + unsigned num_leds; + const struct ar8327_led_info *leds; +}; + +#endif /* AR8216_PLATFORM_H */ + diff --git a/target/linux/generic/files/include/linux/ath5k_platform.h b/target/linux/generic/files/include/linux/ath5k_platform.h new file mode 100644 index 0000000..ec85224 --- /dev/null +++ b/target/linux/generic/files/include/linux/ath5k_platform.h @@ -0,0 +1,30 @@ +/* + * Copyright (c) 2008 Atheros Communications Inc. + * Copyright (c) 2009 Gabor Juhos <juhosg@openwrt.org> + * Copyright (c) 2009 Imre Kaloz <kaloz@openwrt.org> + * Copyright (c) 2010 Daniel Golle <daniel.golle@gmail.com> + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + */ + +#ifndef _LINUX_ATH5K_PLATFORM_H +#define _LINUX_ATH5K_PLATFORM_H + +#define ATH5K_PLAT_EEP_MAX_WORDS 2048 + +struct ath5k_platform_data { + u16 *eeprom_data; + u8 *macaddr; +}; + +#endif /* _LINUX_ATH5K_PLATFORM_H */ diff --git a/target/linux/generic/files/include/linux/ath9k_platform.h b/target/linux/generic/files/include/linux/ath9k_platform.h new file mode 100644 index 0000000..9fa7016 --- /dev/null +++ b/target/linux/generic/files/include/linux/ath9k_platform.h @@ -0,0 +1,49 @@ +/* + * Copyright (c) 2008 Atheros Communications Inc. + * Copyright (c) 2009 Gabor Juhos <juhosg@openwrt.org> + * Copyright (c) 2009 Imre Kaloz <kaloz@openwrt.org> + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + */ + +#ifndef _LINUX_ATH9K_PLATFORM_H +#define _LINUX_ATH9K_PLATFORM_H + +#define ATH9K_PLAT_EEP_MAX_WORDS 2048 + +struct ath9k_platform_data { + const char *eeprom_name; + + u16 eeprom_data[ATH9K_PLAT_EEP_MAX_WORDS]; + u8 *macaddr; + + int led_pin; + u32 gpio_mask; + u32 gpio_val; + + bool endian_check; + bool is_clk_25mhz; + bool tx_gain_buffalo; + bool disable_2ghz; + bool disable_5ghz; + + int (*get_mac_revision)(void); + int (*external_reset)(void); + + bool use_eeprom; + + int num_leds; + const struct gpio_led *leds; +}; + +#endif /* _LINUX_ATH9K_PLATFORM_H */ diff --git a/target/linux/generic/files/include/linux/myloader.h b/target/linux/generic/files/include/linux/myloader.h new file mode 100644 index 0000000..d89e415 --- /dev/null +++ b/target/linux/generic/files/include/linux/myloader.h @@ -0,0 +1,121 @@ +/* + * Compex's MyLoader specific definitions + * + * Copyright (C) 2006-2008 Gabor Juhos <juhosg@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + */ + +#ifndef _MYLOADER_H_ +#define _MYLOADER_H_ + +/* Myloader specific magic numbers */ +#define MYLO_MAGIC_SYS_PARAMS 0x20021107 +#define MYLO_MAGIC_PARTITIONS 0x20021103 +#define MYLO_MAGIC_BOARD_PARAMS 0x20021103 + +/* Vendor ID's (seems to be same as the PCI vendor ID's) */ +#define VENID_COMPEX 0x11F6 + +/* Devices based on the ADM5120 */ +#define DEVID_COMPEX_NP27G 0x0078 +#define DEVID_COMPEX_NP28G 0x044C +#define DEVID_COMPEX_NP28GHS 0x044E +#define DEVID_COMPEX_WP54Gv1C 0x0514 +#define DEVID_COMPEX_WP54G 0x0515 +#define DEVID_COMPEX_WP54AG 0x0546 +#define DEVID_COMPEX_WPP54AG 0x0550 +#define DEVID_COMPEX_WPP54G 0x0555 + +/* Devices based on the Atheros AR2317 */ +#define DEVID_COMPEX_NP25G 0x05E6 +#define DEVID_COMPEX_WPE53G 0x05DC + +/* Devices based on the Atheros AR71xx */ +#define DEVID_COMPEX_WP543 0x0640 +#define DEVID_COMPEX_WPE72 0x0672 + +/* Devices based on the IXP422 */ +#define DEVID_COMPEX_WP18 0x047E +#define DEVID_COMPEX_NP18A 0x0489 + +/* Other devices */ +#define DEVID_COMPEX_NP26G8M 0x03E8 +#define DEVID_COMPEX_NP26G16M 0x03E9 + +struct mylo_partition { + uint16_t flags; /* partition flags */ + uint16_t type; /* type of the partition */ + uint32_t addr; /* relative address of the partition from the + flash start */ + uint32_t size; /* size of the partition in bytes */ + uint32_t param; /* if this is the active partition, the + MyLoader load code to this address */ +}; + +#define PARTITION_FLAG_ACTIVE 0x8000 /* this is the active partition, + * MyLoader loads firmware from here */ +#define PARTITION_FLAG_ISRAM 0x2000 /* FIXME: this is a RAM partition? */ +#define PARTIIION_FLAG_RAMLOAD 0x1000 /* FIXME: load this partition into the RAM? */ +#define PARTITION_FLAG_PRELOAD 0x0800 /* the partition data preloaded to RAM + * before decompression */ +#define PARTITION_FLAG_LZMA 0x0100 /* partition data compressed by LZMA */ +#define PARTITION_FLAG_HAVEHDR 0x0002 /* the partition data have a header */ + +#define PARTITION_TYPE_FREE 0 +#define PARTITION_TYPE_USED 1 + +#define MYLO_MAX_PARTITIONS 8 /* maximum number of partitions in the + partition table */ + +struct mylo_partition_table { + uint32_t magic; /* must be MYLO_MAGIC_PARTITIONS */ + uint32_t res0; /* unknown/unused */ + uint32_t res1; /* unknown/unused */ + uint32_t res2; /* unknown/unused */ + struct mylo_partition partitions[MYLO_MAX_PARTITIONS]; +}; + +struct mylo_partition_header { + uint32_t len; /* length of the partition data */ + uint32_t crc; /* CRC value of the partition data */ +}; + +struct mylo_system_params { + uint32_t magic; /* must be MYLO_MAGIC_SYS_PARAMS */ + uint32_t res0; + uint32_t res1; + uint32_t mylo_ver; + uint16_t vid; /* Vendor ID */ + uint16_t did; /* Device ID */ + uint16_t svid; /* Sub Vendor ID */ + uint16_t sdid; /* Sub Device ID */ + uint32_t rev; /* device revision */ + uint32_t fwhi; + uint32_t fwlo; + uint32_t tftp_addr; + uint32_t prog_start; + uint32_t flash_size; /* size of boot FLASH in bytes */ + uint32_t dram_size; /* size of onboard RAM in bytes */ +}; + +struct mylo_eth_addr { + uint8_t mac[6]; + uint8_t csum[2]; +}; + +#define MYLO_ETHADDR_COUNT 8 /* maximum number of ethernet address + in the board parameters */ + +struct mylo_board_params { + uint32_t magic; /* must be MYLO_MAGIC_BOARD_PARAMS */ + uint32_t res0; + uint32_t res1; + uint32_t res2; + struct mylo_eth_addr addr[MYLO_ETHADDR_COUNT]; +}; + +#endif /* _MYLOADER_H_*/ diff --git a/target/linux/generic/files/include/linux/platform_data/adm6996-gpio.h b/target/linux/generic/files/include/linux/platform_data/adm6996-gpio.h new file mode 100644 index 0000000..e4fcfaf --- /dev/null +++ b/target/linux/generic/files/include/linux/platform_data/adm6996-gpio.h @@ -0,0 +1,30 @@ +/* + * ADM6996 GPIO platform data + * + * Copyright (C) 2013 Hauke Mehrtens <hauke@hauke-m.de> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License v2 as published by the + * Free Software Foundation + */ + +#ifndef __PLATFORM_ADM6996_GPIO_H +#define __PLATFORM_ADM6996_GPIO_H + +#include <linux/kernel.h> + +enum adm6996_model { + ADM6996FC = 1, + ADM6996M = 2, + ADM6996L = 3, +}; + +struct adm6996_gpio_platform_data { + u8 eecs; + u8 eesk; + u8 eedi; + u8 eerc; + enum adm6996_model model; +}; + +#endif diff --git a/target/linux/generic/files/include/linux/platform_data/b53.h b/target/linux/generic/files/include/linux/platform_data/b53.h new file mode 100644 index 0000000..7842741 --- /dev/null +++ b/target/linux/generic/files/include/linux/platform_data/b53.h @@ -0,0 +1,36 @@ +/* + * B53 platform data + * + * Copyright (C) 2013 Jonas Gorski <jogo@openwrt.org> + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + */ + +#ifndef __B53_H +#define __B53_H + +#include <linux/kernel.h> + +struct b53_platform_data { + u32 chip_id; + u16 enabled_ports; + + /* allow to specify an ethX alias */ + const char *alias; + + /* only used by MMAP'd driver */ + unsigned big_endian:1; + void __iomem *regs; +}; + +#endif diff --git a/target/linux/generic/files/include/linux/platform_data/brcmfmac-sdio.h b/target/linux/generic/files/include/linux/platform_data/brcmfmac-sdio.h new file mode 100644 index 0000000..1ade657 --- /dev/null +++ b/target/linux/generic/files/include/linux/platform_data/brcmfmac-sdio.h @@ -0,0 +1,124 @@ +/* + * Copyright (c) 2013 Broadcom Corporation + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY + * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION + * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN + * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + */ + +#ifndef _LINUX_BRCMFMAC_PLATFORM_H +#define _LINUX_BRCMFMAC_PLATFORM_H + +/* + * Platform specific driver functions and data. Through the platform specific + * device data functions can be provided to help the brcmfmac driver to + * operate with the device in combination with the used platform. + * + * Use the platform data in the following (similar) way: + * + * +#include <brcmfmac_platform.h> + + +static void brcmfmac_power_on(void) +{ +} + +static void brcmfmac_power_off(void) +{ +} + +static void brcmfmac_reset(void) +{ +} + +static struct brcmfmac_sdio_platform_data brcmfmac_sdio_pdata = { + .power_on = brcmfmac_power_on, + .power_off = brcmfmac_power_off, + .reset = brcmfmac_reset +}; + +static struct platform_device brcmfmac_device = { + .name = BRCMFMAC_SDIO_PDATA_NAME, + .id = PLATFORM_DEVID_NONE, + .dev.platform_data = &brcmfmac_sdio_pdata +}; + +void __init brcmfmac_init_pdata(void) +{ + brcmfmac_sdio_pdata.oob_irq_supported = true; + brcmfmac_sdio_pdata.oob_irq_nr = gpio_to_irq(GPIO_BRCMF_SDIO_OOB); + brcmfmac_sdio_pdata.oob_irq_flags = IORESOURCE_IRQ | + IORESOURCE_IRQ_HIGHLEVEL; + platform_device_register(&brcmfmac_device); +} + * + * + * Note: the brcmfmac can be loaded as module or be statically built-in into + * the kernel. If built-in then do note that it uses module_init (and + * module_exit) routines which equal device_initcall. So if you intend to + * create a module with the platform specific data for the brcmfmac and have + * it built-in to the kernel then use a higher initcall then device_initcall + * (see init.h). If this is not done then brcmfmac will load without problems + * but will not pickup the platform data. + * + * When the driver does not "detect" platform driver data then it will continue + * without reporting anything and just assume there is no data needed. Which is + * probably true for most platforms. + * + * Explanation of the platform_data fields: + * + * drive_strength: is the preferred drive_strength to be used for the SDIO + * pins. If 0 then a default value will be used. This is the target drive + * strength, the exact drive strength which will be used depends on the + * capabilities of the device. + * + * oob_irq_supported: does the board have support for OOB interrupts. SDIO + * in-band interrupts are relatively slow and for having less overhead on + * interrupt processing an out of band interrupt can be used. If the HW + * supports this then enable this by setting this field to true and configure + * the oob related fields. + * + * oob_irq_nr, oob_irq_flags: the OOB interrupt information. The values are + * used for registering the irq using request_irq function. + * + * power_on: This function is called by the brcmfmac when the module gets + * loaded. This can be particularly useful for low power devices. The platform + * spcific routine may for example decide to power up the complete device. + * If there is no use-case for this function then provide NULL. + * + * power_off: This function is called by the brcmfmac when the module gets + * unloaded. At this point the device can be powered down or otherwise be reset. + * So if an actual power_off is not supported but reset is then reset the device + * when this function gets called. This can be particularly useful for low power + * devices. If there is no use-case for this function (either power-down or + * reset) then provide NULL. + * + * reset: This function can get called if the device communication broke down. + * This functionality is particularly useful in case of SDIO type devices. It is + * possible to reset a dongle via sdio data interface, but it requires that + * this is fully functional. This function is chip/module specific and this + * function should return only after the complete reset has completed. + */ + +#define BRCMFMAC_SDIO_PDATA_NAME "brcmfmac_sdio" + +struct brcmfmac_sdio_platform_data { + unsigned int drive_strength; + bool oob_irq_supported; + unsigned int oob_irq_nr; + unsigned long oob_irq_flags; + void (*power_on)(void); + void (*power_off)(void); + void (*reset)(void); +}; + +#endif /* _LINUX_BRCMFMAC_PLATFORM_H */ diff --git a/target/linux/generic/files/include/linux/routerboot.h b/target/linux/generic/files/include/linux/routerboot.h new file mode 100644 index 0000000..3cda858 --- /dev/null +++ b/target/linux/generic/files/include/linux/routerboot.h @@ -0,0 +1,106 @@ +/* + * Mikrotik's RouterBOOT definitions + * + * Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + */ + +#ifndef _ROUTERBOOT_H +#define _ROUTERBOOT_H + +#define RB_MAC_SIZE 6 + +/* + * Magic numbers + */ +#define RB_MAGIC_HARD 0x64726148 /* "Hard" */ +#define RB_MAGIC_SOFT 0x74666F53 /* "Soft" */ +#define RB_MAGIC_DAWN 0x6E776144 /* "Dawn" */ + +#define RB_ID_TERMINATOR 0 + +/* + * ID values for Hardware settings + */ +#define RB_ID_HARD_01 1 +#define RB_ID_HARD_02 2 +#define RB_ID_FLASH_INFO 3 +#define RB_ID_MAC_ADDRESS_PACK 4 +#define RB_ID_BOARD_NAME 5 +#define RB_ID_BIOS_VERSION 6 +#define RB_ID_HARD_07 7 +#define RB_ID_SDRAM_TIMINGS 8 +#define RB_ID_DEVICE_TIMINGS 9 +#define RB_ID_SOFTWARE_ID 10 +#define RB_ID_SERIAL_NUMBER 11 +#define RB_ID_HARD_12 12 +#define RB_ID_MEMORY_SIZE 13 +#define RB_ID_MAC_ADDRESS_COUNT 14 +#define RB_ID_HW_OPTIONS 21 +#define RB_ID_WLAN_DATA 22 + +/* + * ID values for Software settings + */ +#define RB_ID_UART_SPEED 1 +#define RB_ID_BOOT_DELAY 2 +#define RB_ID_BOOT_DEVICE 3 +#define RB_ID_BOOT_KEY 4 +#define RB_ID_CPU_MODE 5 +#define RB_ID_FW_VERSION 6 +#define RB_ID_SOFT_07 7 +#define RB_ID_SOFT_08 8 +#define RB_ID_BOOT_PROTOCOL 9 +#define RB_ID_SOFT_10 10 +#define RB_ID_SOFT_11 11 + +/* + * UART_SPEED values + */ +#define RB_UART_SPEED_115200 0 +#define RB_UART_SPEED_57600 1 +#define RB_UART_SPEED_38400 2 +#define RB_UART_SPEED_19200 3 +#define RB_UART_SPEED_9600 4 +#define RB_UART_SPEED_4800 5 +#define RB_UART_SPEED_2400 6 +#define RB_UART_SPEED_1200 7 + +/* + * BOOT_DELAY values + */ +#define RB_BOOT_DELAY_0SEC 0 +#define RB_BOOT_DELAY_1SEC 1 +#define RB_BOOT_DELAY_2SEC 2 + +/* + * BOOT_DEVICE values + */ +#define RB_BOOT_DEVICE_ETHER 0 +#define RB_BOOT_DEVICE_NANDETH 1 +#define RB_BOOT_DEVICE_ETHONCE 2 +#define RB_BOOT_DEVICE_NANDONLY 3 + +/* + * BOOT_KEY values + */ +#define RB_BOOT_KEY_ANY 0 +#define RB_BOOT_KEY_DEL 1 + +/* + * CPU_MODE values + */ +#define RB_CPU_MODE_POWERSAVE 0 +#define RB_CPU_MODE_REGULAR 1 + +/* + * BOOT_PROTOCOL values + */ +#define RB_BOOT_PROTOCOL_BOOTP 0 +#define RB_BOOT_PROTOCOL_DHCP 1 + +#endif /* _ROUTERBOOT_H */ diff --git a/target/linux/generic/files/include/linux/rt2x00_platform.h b/target/linux/generic/files/include/linux/rt2x00_platform.h new file mode 100644 index 0000000..80483ef --- /dev/null +++ b/target/linux/generic/files/include/linux/rt2x00_platform.h @@ -0,0 +1,24 @@ +/* + * Platform data definition for the rt2x00 driver + * + * Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + */ + +#ifndef _RT2X00_PLATFORM_H +#define _RT2X00_PLATFORM_H + +struct rt2x00_platform_data { + char *eeprom_file_name; + const u8 *mac_address; + + int disable_2ghz; + int disable_5ghz; + int clk_is_20mhz; +}; + +#endif /* _RT2X00_PLATFORM_H */ diff --git a/target/linux/generic/files/include/linux/rtl8366.h b/target/linux/generic/files/include/linux/rtl8366.h new file mode 100644 index 0000000..78daed2 --- /dev/null +++ b/target/linux/generic/files/include/linux/rtl8366.h @@ -0,0 +1,40 @@ +/* + * Platform data definition for the Realtek RTL8366RB/S ethernet switch driver + * + * Copyright (C) 2009-2010 Gabor Juhos <juhosg@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#ifndef _RTL8366_H +#define _RTL8366_H + +#define RTL8366_DRIVER_NAME "rtl8366" +#define RTL8366S_DRIVER_NAME "rtl8366s" +#define RTL8366RB_DRIVER_NAME "rtl8366rb" + +enum rtl8366_type { + RTL8366_TYPE_UNKNOWN, + RTL8366_TYPE_S, + RTL8366_TYPE_RB, +}; + +struct rtl8366_initval { + unsigned reg; + u16 val; +}; + +struct rtl8366_platform_data { + unsigned gpio_sda; + unsigned gpio_sck; + void (*hw_reset)(bool active); + + unsigned num_initvals; + struct rtl8366_initval *initvals; +}; + +enum rtl8366_type rtl8366_smi_detect(struct rtl8366_platform_data *pdata); + +#endif /* _RTL8366_H */ diff --git a/target/linux/generic/files/include/linux/rtl8367.h b/target/linux/generic/files/include/linux/rtl8367.h new file mode 100644 index 0000000..855de6a --- /dev/null +++ b/target/linux/generic/files/include/linux/rtl8367.h @@ -0,0 +1,60 @@ +/* + * Platform data definition for the Realtek RTL8367 ethernet switch driver + * + * Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#ifndef _RTL8367_H +#define _RTL8367_H + +#define RTL8367_DRIVER_NAME "rtl8367" +#define RTL8367B_DRIVER_NAME "rtl8367b" + +enum rtl8367_port_speed { + RTL8367_PORT_SPEED_10 = 0, + RTL8367_PORT_SPEED_100, + RTL8367_PORT_SPEED_1000, +}; + +struct rtl8367_port_ability { + int force_mode; + int nway; + int txpause; + int rxpause; + int link; + int duplex; + enum rtl8367_port_speed speed; +}; + +enum rtl8367_extif_mode { + RTL8367_EXTIF_MODE_DISABLED = 0, + RTL8367_EXTIF_MODE_RGMII, + RTL8367_EXTIF_MODE_MII_MAC, + RTL8367_EXTIF_MODE_MII_PHY, + RTL8367_EXTIF_MODE_TMII_MAC, + RTL8367_EXTIF_MODE_TMII_PHY, + RTL8367_EXTIF_MODE_GMII, + RTL8367_EXTIF_MODE_RGMII_33V, +}; + +struct rtl8367_extif_config { + unsigned int txdelay; + unsigned int rxdelay; + enum rtl8367_extif_mode mode; + struct rtl8367_port_ability ability; +}; + +struct rtl8367_platform_data { + unsigned gpio_sda; + unsigned gpio_sck; + void (*hw_reset)(bool active); + + struct rtl8367_extif_config *extif0_cfg; + struct rtl8367_extif_config *extif1_cfg; +}; + +#endif /* _RTL8367_H */ diff --git a/target/linux/generic/files/include/linux/switch.h b/target/linux/generic/files/include/linux/switch.h new file mode 100644 index 0000000..4291364 --- /dev/null +++ b/target/linux/generic/files/include/linux/switch.h @@ -0,0 +1,169 @@ +/* + * switch.h: Switch configuration API + * + * Copyright (C) 2008 Felix Fietkau <nbd@openwrt.org> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ +#ifndef _LINUX_SWITCH_H +#define _LINUX_SWITCH_H + +#include <net/genetlink.h> +#include <uapi/linux/switch.h> + +struct switch_dev; +struct switch_op; +struct switch_val; +struct switch_attr; +struct switch_attrlist; +struct switch_led_trigger; + +int register_switch(struct switch_dev *dev, struct net_device *netdev); +void unregister_switch(struct switch_dev *dev); + +/** + * struct switch_attrlist - attribute list + * + * @n_attr: number of attributes + * @attr: pointer to the attributes array + */ +struct switch_attrlist { + int n_attr; + const struct switch_attr *attr; +}; + +enum switch_port_speed { + SWITCH_PORT_SPEED_UNKNOWN = 0, + SWITCH_PORT_SPEED_10 = 10, + SWITCH_PORT_SPEED_100 = 100, + SWITCH_PORT_SPEED_1000 = 1000, +}; + +struct switch_port_link { + bool link; + bool duplex; + bool aneg; + bool tx_flow; + bool rx_flow; + enum switch_port_speed speed; + /* in ethtool adv_t format */ + u32 eee; +}; + +struct switch_port_stats { + unsigned long tx_bytes; + unsigned long rx_bytes; +}; + +/** + * struct switch_dev_ops - switch driver operations + * + * @attr_global: global switch attribute list + * @attr_port: port attribute list + * @attr_vlan: vlan attribute list + * + * Callbacks: + * + * @get_vlan_ports: read the port list of a VLAN + * @set_vlan_ports: set the port list of a VLAN + * + * @get_port_pvid: get the primary VLAN ID of a port + * @set_port_pvid: set the primary VLAN ID of a port + * + * @apply_config: apply all changed settings to the switch + * @reset_switch: resetting the switch + */ +struct switch_dev_ops { + struct switch_attrlist attr_global, attr_port, attr_vlan; + + int (*get_vlan_ports)(struct switch_dev *dev, struct switch_val *val); + int (*set_vlan_ports)(struct switch_dev *dev, struct switch_val *val); + + int (*get_port_pvid)(struct switch_dev *dev, int port, int *val); + int (*set_port_pvid)(struct switch_dev *dev, int port, int val); + + int (*apply_config)(struct switch_dev *dev); + int (*reset_switch)(struct switch_dev *dev); + + int (*get_port_link)(struct switch_dev *dev, int port, + struct switch_port_link *link); + int (*get_port_stats)(struct switch_dev *dev, int port, + struct switch_port_stats *stats); +}; + +struct switch_dev { + struct device_node *of_node; + const struct switch_dev_ops *ops; + /* will be automatically filled */ + char devname[IFNAMSIZ]; + + const char *name; + /* NB: either alias or netdev must be set */ + const char *alias; + struct net_device *netdev; + + int ports; + int vlans; + int cpu_port; + + /* the following fields are internal for swconfig */ + int id; + struct list_head dev_list; + unsigned long def_global, def_port, def_vlan; + + struct mutex sw_mutex; + struct switch_port *portbuf; + struct switch_portmap *portmap; + + char buf[128]; + +#ifdef CONFIG_SWCONFIG_LEDS + struct switch_led_trigger *led_trigger; +#endif +}; + +struct switch_port { + u32 id; + u32 flags; +}; + +struct switch_portmap { + u32 virt; + const char *s; +}; + +struct switch_val { + const struct switch_attr *attr; + int port_vlan; + int len; + union { + const char *s; + u32 i; + struct switch_port *ports; + } value; +}; + +struct switch_attr { + int disabled; + int type; + const char *name; + const char *description; + + int (*set)(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val); + int (*get)(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val); + + /* for driver internal use */ + int id; + int ofs; + int max; +}; + +#endif /* _LINUX_SWITCH_H */ |