aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/brcm2708/patches-4.1/0197-BCM270X_DT-Add-at86rf233-overlay.patch
diff options
context:
space:
mode:
authorJames <>2015-11-04 11:49:21 +0000
committerJames <>2015-11-04 11:49:21 +0000
commit716ca530e1c4515d8683c9d5be3d56b301758b66 (patch)
tree700eb5bcc1a462a5f21dcec15ce7c97ecfefa772 /target/linux/brcm2708/patches-4.1/0197-BCM270X_DT-Add-at86rf233-overlay.patch
downloadtrunk-47381-master.tar.gz
trunk-47381-master.tar.bz2
trunk-47381-master.zip
trunk-47381HEADmaster
Diffstat (limited to 'target/linux/brcm2708/patches-4.1/0197-BCM270X_DT-Add-at86rf233-overlay.patch')
-rw-r--r--target/linux/brcm2708/patches-4.1/0197-BCM270X_DT-Add-at86rf233-overlay.patch130
1 files changed, 130 insertions, 0 deletions
diff --git a/target/linux/brcm2708/patches-4.1/0197-BCM270X_DT-Add-at86rf233-overlay.patch b/target/linux/brcm2708/patches-4.1/0197-BCM270X_DT-Add-at86rf233-overlay.patch
new file mode 100644
index 0000000..3ede6a5
--- /dev/null
+++ b/target/linux/brcm2708/patches-4.1/0197-BCM270X_DT-Add-at86rf233-overlay.patch
@@ -0,0 +1,130 @@
+From 7b82355fa657220c9d5e72f0aa5228f0d76819fa Mon Sep 17 00:00:00 2001
+From: Phil Elwell <phil@raspberrypi.org>
+Date: Mon, 5 Oct 2015 10:47:45 +0100
+Subject: [PATCH 197/203] BCM270X_DT: Add at86rf233 overlay
+
+Add an overlay to support the Atmel AT86RF233 WPAN transceiver on spi0.0.
+
+See: https://github.com/raspberrypi/linux/issues/1151
+---
+ arch/arm/boot/dts/overlays/Makefile | 1 +
+ arch/arm/boot/dts/overlays/README | 21 +++++++--
+ arch/arm/boot/dts/overlays/at86rf233-overlay.dts | 54 ++++++++++++++++++++++++
+ 3 files changed, 72 insertions(+), 4 deletions(-)
+ create mode 100644 arch/arm/boot/dts/overlays/at86rf233-overlay.dts
+
+--- a/arch/arm/boot/dts/overlays/Makefile
++++ b/arch/arm/boot/dts/overlays/Makefile
+@@ -13,6 +13,7 @@ ifeq ($(CONFIG_ARCH_BCM2835),y)
+ endif
+
+ dtb-$(RPI_DT_OVERLAYS) += ads7846-overlay.dtb
++dtb-$(RPI_DT_OVERLAYS) += at86rf233-overlay.dtb
+ dtb-$(RPI_DT_OVERLAYS) += bmp085_i2c-sensor-overlay.dtb
+ dtb-$(RPI_DT_OVERLAYS) += dht11-overlay.dtb
+ dtb-$(RPI_DT_OVERLAYS) += enc28j60-overlay.dtb
+--- a/arch/arm/boot/dts/overlays/README
++++ b/arch/arm/boot/dts/overlays/README
+@@ -69,13 +69,14 @@ DT parameters:
+
+ Parameters always have default values, although in some cases (e.g. "w1-gpio")
+ it is necessary to provided multiple overlays in order to get the desired
+-behaviour. See the list of overlays below for a description of the parameters and their defaults.
++behaviour. See the list of overlays below for a description of the parameters
++and their defaults.
+
+ The Overlay and Parameter Reference
+ ===================================
+
+-N.B. When editing this file, please preserve the indentation levels to make it simple to parse
+-programmatically. NO HARD TABS.
++N.B. When editing this file, please preserve the indentation levels to make it
++simple to parse programmatically. NO HARD TABS.
+
+
+ Name: <The base DTB>
+@@ -149,7 +150,7 @@ Name: ads7846
+ Info: ADS7846 Touch controller
+ Load: dtoverlay=ads7846,<param>=<val>
+ Params: cs SPI bus Chip Select (default 1)
+- speed SPI bus speed (default 2Mhz, max 3.25MHz)
++ speed SPI bus speed (default 2MHz, max 3.25MHz)
+ penirq GPIO used for PENIRQ. REQUIRED
+ penirq_pull Set GPIO pull (default 0=none, 2=pullup)
+ swapxy Swap x and y axis
+@@ -170,6 +171,18 @@ Params: cs SPI bus
+ www.kernel.org/doc/Documentation/devicetree/bindings/input/ads7846.txt
+
+
++Name: at86rf233
++Info: Configures the Atmel AT86RF233 802.15.4 low-power WPAN transceiver,
++ connected to spi0.0
++Load: dtoverlay=at86rf233,<param>=<val>
++Params: interrupt GPIO used for INT (default 23)
++ reset GPIO used for Reset (default 24)
++ sleep GPIO used for Sleep (default 25)
++ speed SPI bus speed in Hz (default 750000)
++ trim Fine tuning of the internal capacitance
++ arrays (0=+0pF, 15=+4.5pF, default 15)
++
++
+ Name: bmp085_i2c-sensor
+ Info: Configures the BMP085/BMP180 digital barometric pressure and temperature
+ sensors from Bosch Sensortec
+--- /dev/null
++++ b/arch/arm/boot/dts/overlays/at86rf233-overlay.dts
+@@ -0,0 +1,54 @@
++/dts-v1/;
++/plugin/;
++
++/* Overlay for Atmel AT86RF233 IEEE 802.15.4 WPAN transceiver on spi0.0 */
++
++/ {
++ compatible = "brcm,bcm2835", "brcm,bcm2836", "brcm,bcm2708", "brcm,bcm2709";
++
++ fragment@0 {
++ target = <&spi0>;
++ __overlay__ {
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ status = "okay";
++
++ spidev@0{
++ status = "disabled";
++ };
++
++ lowpan0: at86rf233@0 {
++ compatible = "atmel,at86rf233";
++ reg = <0>;
++ interrupt-parent = <&gpio>;
++ interrupts = <23 4>; /* active high */
++ reset-gpio = <&gpio 24 1>;
++ sleep-gpio = <&gpio 25 1>;
++ spi-max-frequency = <7500000>;
++ xtal-trim = /bits/ 8 <0xf>;
++ };
++ };
++ };
++
++ fragment@1 {
++ target = <&gpio>;
++ __overlay__ {
++ lowpan0_pins: lowpan0_pins {
++ brcm,pins = <23 24 25>;
++ brcm,function = <0 1 1>; /* in out out */
++ };
++ };
++ };
++
++ __overrides__ {
++ interrupt = <&lowpan0>, "interrupts:0",
++ <&lowpan0_pins>, "brcm,pins:0";
++ reset = <&lowpan0>, "reset-gpio:4",
++ <&lowpan0_pins>, "brcm,pins:4";
++ sleep = <&lowpan0>, "sleep-gpio:4",
++ <&lowpan0_pins>, "brcm,pins:8";
++ speed = <&lowpan0>, "spi-max-frequency:0";
++ trim = <&lowpan0>, "xtal-trim.0";
++ };
++};