aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/imx6/patches-4.1/204-net-igb-register-mii_bus-for-SerDes-w-external-phy.patch
blob: d503e911c57d41538a97f5277d60740ed5a4dfb5 (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
From 03855caf93f7332a3f320228ba1a0e7baae8a749 Mon Sep 17 00:00:00 2001
From: Tim Harvey <tharvey@gateworks.com>
Date: Thu, 15 May 2014 12:36:23 -0700
Subject: [PATCH] net: igb: register mii_bus for SerDes w/ external phy

If an i210 is configured for 1000BASE-BX link_mode and has an external phy
specified, then register an mii bus using the external phy address as
a mask.

An i210 hooked to an external standard phy will be configured with a link_mo
of SGMII in which case phy ops will be configured and used internall in the
igb driver for link status. However, in certain cases one might be using a
backplane SerDes connection to something that talks on the mdio bus but is
not a standard phy, such as a switch. In this case by registering an mdio
bus a phy driver can manage the device.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
---
 drivers/net/ethernet/intel/igb/e1000_82575.c |  15 +++
 drivers/net/ethernet/intel/igb/e1000_hw.h    |   7 ++
 drivers/net/ethernet/intel/igb/igb_main.c    | 168 ++++++++++++++++++++++++++-
 3 files changed, 185 insertions(+), 5 deletions(-)

--- a/drivers/net/ethernet/intel/igb/e1000_82575.c
+++ b/drivers/net/ethernet/intel/igb/e1000_82575.c
@@ -598,13 +598,25 @@ static s32 igb_get_invariants_82575(stru
 	switch (link_mode) {
 	case E1000_CTRL_EXT_LINK_MODE_1000BASE_KX:
 		hw->phy.media_type = e1000_media_type_internal_serdes;
+		if (igb_sgmii_uses_mdio_82575(hw)) {
+			u32 mdicnfg = rd32(E1000_MDICNFG);
+			mdicnfg &= E1000_MDICNFG_PHY_MASK;
+			hw->phy.addr = mdicnfg >> E1000_MDICNFG_PHY_SHIFT;
+			hw_dbg("1000BASE_KX w/ external MDIO device at 0x%x\n",
+			       hw->phy.addr);
+		} else {
+			hw_dbg("1000BASE_KX");
+		}
 		break;
 	case E1000_CTRL_EXT_LINK_MODE_SGMII:
 		/* Get phy control interface type set (MDIO vs. I2C)*/
 		if (igb_sgmii_uses_mdio_82575(hw)) {
 			hw->phy.media_type = e1000_media_type_copper;
 			dev_spec->sgmii_active = true;
+			hw_dbg("SGMII with external MDIO PHY");
 			break;
+		} else {
+			hw_dbg("SGMII with external I2C PHY");
 		}
 		/* fall through for I2C based SGMII */
 	case E1000_CTRL_EXT_LINK_MODE_PCIE_SERDES:
@@ -621,8 +633,11 @@ static s32 igb_get_invariants_82575(stru
 				hw->phy.media_type = e1000_media_type_copper;
 				dev_spec->sgmii_active = true;
 			}
+			hw_dbg("SERDES with external SFP");
 
 			break;
+		} else {
+			hw_dbg("SERDES");
 		}
 
 		/* do not change link mode for 100BaseFX */
--- a/drivers/net/ethernet/intel/igb/e1000_hw.h
+++ b/drivers/net/ethernet/intel/igb/e1000_hw.h
@@ -27,6 +27,7 @@
 #include <linux/delay.h>
 #include <linux/io.h>
 #include <linux/netdevice.h>
+#include <linux/phy.h>
 
 #include "e1000_regs.h"
 #include "e1000_defines.h"
@@ -543,6 +544,12 @@ struct e1000_hw {
 	struct e1000_mbx_info mbx;
 	struct e1000_host_mng_dhcp_cookie mng_cookie;
 
+#ifdef CONFIG_PHYLIB
+	/* Phylib and MDIO interface */
+	struct mii_bus *mii_bus;
+	struct phy_device *phy_dev;
+	phy_interface_t phy_interface;
+#endif
 	union {
 		struct e1000_dev_spec_82575	_82575;
 	} dev_spec;
--- a/drivers/net/ethernet/intel/igb/igb_main.c
+++ b/drivers/net/ethernet/intel/igb/igb_main.c
@@ -41,6 +41,7 @@
 #include <linux/if_vlan.h>
 #include <linux/pci.h>
 #include <linux/pci-aspm.h>
+#include <linux/phy.h>
 #include <linux/delay.h>
 #include <linux/interrupt.h>
 #include <linux/ip.h>
@@ -2231,6 +2232,126 @@ static s32 igb_init_i2c(struct igb_adapt
 	return status;
 }
 
+
+#ifdef CONFIG_PHYLIB
+/*
+ * MMIO/PHYdev support
+ */
+
+static int igb_enet_mdio_read(struct mii_bus *bus, int mii_id, int regnum)
+{
+	struct e1000_hw *hw = bus->priv;
+	u16 out;
+	int err;
+
+	err = igb_read_reg_gs40g(hw, mii_id, regnum, &out);
+	if (err)
+		return err;
+	return out;
+}
+
+static int igb_enet_mdio_write(struct mii_bus *bus, int mii_id, int regnum,
+                               u16 val)
+{
+	struct e1000_hw *hw = bus->priv;
+
+	return igb_write_reg_gs40g(hw, mii_id, regnum, val);
+}
+
+static int igb_enet_mdio_reset(struct mii_bus *bus)
+{
+	udelay(300);
+	return 0;
+}
+
+static void igb_enet_mii_link(struct net_device *netdev)
+{
+}
+
+/* Probe the mdio bus for phys and connect them */
+static int igb_enet_mii_probe(struct net_device *netdev)
+{
+	struct igb_adapter *adapter = netdev_priv(netdev);
+	struct e1000_hw *hw = &adapter->hw;
+	struct phy_device *phy_dev = NULL;
+	int phy_id;
+
+	/* check for attached phy */
+	for (phy_id = 0; (phy_id < PHY_MAX_ADDR); phy_id++) {
+		if (hw->mii_bus->phy_map[phy_id]) {
+			phy_dev = hw->mii_bus->phy_map[phy_id];
+			break;
+		}
+	}
+	if (!phy_dev) {
+		netdev_err(netdev, "no PHY found\n");
+		return -ENODEV;
+	}
+
+	hw->phy_interface = PHY_INTERFACE_MODE_RGMII;
+	phy_dev = phy_connect(netdev, dev_name(&phy_dev->dev),
+			      igb_enet_mii_link, hw->phy_interface);
+	if (IS_ERR(phy_dev)) {
+		netdev_err(netdev, "could not attach to PHY\n");
+		return PTR_ERR(phy_dev);
+	}
+
+	hw->phy_dev = phy_dev;
+	netdev_info(netdev, "igb PHY driver [%s] (mii_bus:phy_addr=%s)\n",
+		hw->phy_dev->drv->name, dev_name(&hw->phy_dev->dev));
+
+	return 0;
+}
+
+/* Create and register mdio bus */
+static int igb_enet_mii_init(struct pci_dev *pdev)
+{
+	struct mii_bus *mii_bus;
+	struct net_device *netdev = pci_get_drvdata(pdev);
+	struct igb_adapter *adapter = netdev_priv(netdev);
+	struct e1000_hw *hw = &adapter->hw;
+	int err;
+
+	mii_bus = mdiobus_alloc();
+	if (mii_bus == NULL) {
+		err = -ENOMEM;
+		goto err_out;
+	}
+
+	mii_bus->name = "igb_enet_mii_bus";
+	mii_bus->read = igb_enet_mdio_read;
+	mii_bus->write = igb_enet_mdio_write;
+	mii_bus->reset = igb_enet_mdio_reset;
+	snprintf(mii_bus->id, MII_BUS_ID_SIZE, "%s-%x",
+		 pci_name(pdev), hw->device_id + 1);
+	mii_bus->priv = hw;
+	mii_bus->parent = &pdev->dev;
+	mii_bus->phy_mask = ~(1 << hw->phy.addr);
+
+	err = mdiobus_register(mii_bus);
+	if (err) {
+		printk(KERN_ERR "failed to register mii_bus: %d\n", err);
+		goto err_out_free_mdiobus;
+	}
+	hw->mii_bus = mii_bus;
+
+	return 0;
+
+err_out_free_mdiobus:
+	mdiobus_free(mii_bus);
+err_out:
+	return err;
+}
+
+static void igb_enet_mii_remove(struct e1000_hw *hw)
+{
+	if (hw->mii_bus) {
+		mdiobus_unregister(hw->mii_bus);
+		mdiobus_free(hw->mii_bus);
+	}
+}
+#endif /* CONFIG_PHYLIB */
+
 /**
  *  igb_probe - Device Initialization Routine
  *  @pdev: PCI device information struct
@@ -2653,6 +2774,13 @@ static int igb_probe(struct pci_dev *pde
 		}
 	}
 	pm_runtime_put_noidle(&pdev->dev);
+
+#ifdef CONFIG_PHYLIB
+	/* create and register the mdio bus if using ext phy */
+	if (rd32(E1000_MDICNFG) & E1000_MDICNFG_EXT_MDIO)
+		igb_enet_mii_init(pdev);
+#endif
+
 	return 0;
 
 err_register:
@@ -2796,6 +2924,10 @@ static void igb_remove(struct pci_dev *p
 	struct e1000_hw *hw = &adapter->hw;
 
 	pm_runtime_get_noresume(&pdev->dev);
+#ifdef CONFIG_PHYLIB
+	if (rd32(E1000_MDICNFG) & E1000_MDICNFG_EXT_MDIO)
+		igb_enet_mii_remove(hw);
+#endif
 #ifdef CONFIG_IGB_HWMON
 	igb_sysfs_exit(adapter);
 #endif
@@ -3101,6 +3233,12 @@ static int __igb_open(struct net_device
 	if (!resuming)
 		pm_runtime_put(&pdev->dev);
 
+#ifdef CONFIG_PHYLIB
+	/* Probe and connect to PHY if using ext phy */
+	if (rd32(E1000_MDICNFG) & E1000_MDICNFG_EXT_MDIO)
+		igb_enet_mii_probe(netdev);
+#endif
+
 	/* start the watchdog. */
 	hw->mac.get_link_status = 1;
 	schedule_work(&adapter->watchdog_task);
@@ -7097,21 +7235,41 @@ void igb_alloc_rx_buffers(struct igb_rin
 static int igb_mii_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd)
 {
 	struct igb_adapter *adapter = netdev_priv(netdev);
+	struct e1000_hw *hw = &adapter->hw;
 	struct mii_ioctl_data *data = if_mii(ifr);
 
-	if (adapter->hw.phy.media_type != e1000_media_type_copper)
+	if (adapter->hw.phy.media_type != e1000_media_type_copper &&
+	    !(rd32(E1000_MDICNFG) & E1000_MDICNFG_EXT_MDIO))
 		return -EOPNOTSUPP;
 
 	switch (cmd) {
 	case SIOCGMIIPHY:
-		data->phy_id = adapter->hw.phy.addr;
+		data->phy_id = hw->phy.addr;
 		break;
 	case SIOCGMIIREG:
-		if (igb_read_phy_reg(&adapter->hw, data->reg_num & 0x1F,
-				     &data->val_out))
-			return -EIO;
+		if (hw->mac.type == e1000_i210 || hw->mac.type == e1000_i211) {
+			if (igb_read_reg_gs40g(&adapter->hw, data->phy_id,
+					       data->reg_num & 0x1F,
+			                       &data->val_out))
+				return -EIO;
+		} else {
+			if (igb_read_phy_reg(&adapter->hw, data->reg_num & 0x1F,
+			                     &data->val_out))
+				return -EIO;
+		}
 		break;
 	case SIOCSMIIREG:
+		if (hw->mac.type == e1000_i210 || hw->mac.type == e1000_i211) {
+			if (igb_write_reg_gs40g(hw, data->phy_id,
+					        data->reg_num & 0x1F,
+					        data->val_in))
+				return -EIO;
+		} else {
+			if (igb_write_phy_reg(hw, data->reg_num & 0x1F,
+					      data->val_in))
+				return -EIO;
+		}
+		break;
 	default:
 		return -EOPNOTSUPP;
 	}