diff options
Diffstat (limited to 'target/linux/brcm2708/patches-4.1/0036-BCM2708-Add-I2S-support-to-board-file.patch')
| -rw-r--r-- | target/linux/brcm2708/patches-4.1/0036-BCM2708-Add-I2S-support-to-board-file.patch | 87 |
1 files changed, 87 insertions, 0 deletions
diff --git a/target/linux/brcm2708/patches-4.1/0036-BCM2708-Add-I2S-support-to-board-file.patch b/target/linux/brcm2708/patches-4.1/0036-BCM2708-Add-I2S-support-to-board-file.patch new file mode 100644 index 0000000..223b6a0 --- /dev/null +++ b/target/linux/brcm2708/patches-4.1/0036-BCM2708-Add-I2S-support-to-board-file.patch @@ -0,0 +1,87 @@ +From 272e93911327e40ec57facd1fbc37e98b06c8c79 Mon Sep 17 00:00:00 2001 +From: Florian Meier <florian.meier@koalo.de> +Date: Fri, 22 Nov 2013 19:04:54 +0100 +Subject: [PATCH 036/203] BCM2708: Add I2S support to board file + +Adds the required initializations for I2S +to the board file of mach-bcm2708. + +Signed-off-by: Florian Meier <florian.meier@koalo.de> + +bcm2708-i2s: Enable MMAP support via a DT property and overlay + +The i2s driver used to claim to support MMAP, but that feature was disabled +when some problems were found. Add the ability to enable this feature +through Device Tree, using the i2s-mmap overlay. + +See: #1004 +--- + arch/arm/mach-bcm2708/bcm2708.c | 26 ++++++++++++++++++++++++++ + sound/soc/bcm/bcm2708-i2s.c | 7 ++++++- + 2 files changed, 32 insertions(+), 1 deletion(-) + +--- a/arch/arm/mach-bcm2708/bcm2708.c ++++ b/arch/arm/mach-bcm2708/bcm2708.c +@@ -616,6 +616,28 @@ static struct platform_device bcm2835_th + .name = "bcm2835_thermal", + }; + ++#if defined(CONFIG_SND_BCM2708_SOC_I2S) || defined(CONFIG_SND_BCM2708_SOC_I2S_MODULE) ++static struct resource bcm2708_i2s_resources[] = { ++ { ++ .start = I2S_BASE, ++ .end = I2S_BASE + 0x20, ++ .flags = IORESOURCE_MEM, ++ }, ++ { ++ .start = PCM_CLOCK_BASE, ++ .end = PCM_CLOCK_BASE + 0x02, ++ .flags = IORESOURCE_MEM, ++ } ++}; ++ ++static struct platform_device bcm2708_i2s_device = { ++ .name = "bcm2708-i2s", ++ .id = 0, ++ .num_resources = ARRAY_SIZE(bcm2708_i2s_resources), ++ .resource = bcm2708_i2s_resources, ++}; ++#endif ++ + int __init bcm_register_device(struct platform_device *pdev) + { + int ret; +@@ -780,6 +802,10 @@ void __init bcm2708_init(void) + + bcm_register_device_dt(&bcm2835_thermal_device); + ++#if defined(CONFIG_SND_BCM2708_SOC_I2S) || defined(CONFIG_SND_BCM2708_SOC_I2S_MODULE) ++ bcm_register_device_dt(&bcm2708_i2s_device); ++#endif ++ + if (!use_dt) { + for (i = 0; i < ARRAY_SIZE(amba_devs); i++) { + struct amba_device *d = amba_devs[i]; +--- a/sound/soc/bcm/bcm2708-i2s.c ++++ b/sound/soc/bcm/bcm2708-i2s.c +@@ -874,7 +874,7 @@ static const struct snd_soc_component_dr + .name = "bcm2708-i2s-comp", + }; + +-static const struct snd_pcm_hardware bcm2708_pcm_hardware = { ++static struct snd_pcm_hardware bcm2708_pcm_hardware = { + .info = SNDRV_PCM_INFO_INTERLEAVED | + SNDRV_PCM_INFO_JOINT_DUPLEX, + .formats = SNDRV_PCM_FMTBIT_S16_LE | +@@ -902,6 +902,11 @@ static int bcm2708_i2s_probe(struct plat + struct regmap *regmap[2]; + struct resource *mem[2]; + ++ if (of_property_read_bool(pdev->dev.of_node, "brcm,enable-mmap")) ++ bcm2708_pcm_hardware.info |= ++ SNDRV_PCM_INFO_MMAP | ++ SNDRV_PCM_INFO_MMAP_VALID; ++ + /* Request both ioareas */ + for (i = 0; i <= 1; i++) { + void __iomem *base; |