diff options
author | James <> | 2015-11-04 11:49:21 +0000 |
---|---|---|
committer | James <> | 2015-11-04 11:49:21 +0000 |
commit | 716ca530e1c4515d8683c9d5be3d56b301758b66 (patch) | |
tree | 700eb5bcc1a462a5f21dcec15ce7c97ecfefa772 /target/linux/mediatek/patches/0023-thermal-Add-Mediatek-thermal-controller-support.patch | |
download | trunk-47381-716ca530e1c4515d8683c9d5be3d56b301758b66.tar.gz trunk-47381-716ca530e1c4515d8683c9d5be3d56b301758b66.tar.bz2 trunk-47381-716ca530e1c4515d8683c9d5be3d56b301758b66.zip |
Diffstat (limited to 'target/linux/mediatek/patches/0023-thermal-Add-Mediatek-thermal-controller-support.patch')
-rw-r--r-- | target/linux/mediatek/patches/0023-thermal-Add-Mediatek-thermal-controller-support.patch | 785 |
1 files changed, 785 insertions, 0 deletions
diff --git a/target/linux/mediatek/patches/0023-thermal-Add-Mediatek-thermal-controller-support.patch b/target/linux/mediatek/patches/0023-thermal-Add-Mediatek-thermal-controller-support.patch new file mode 100644 index 0000000..827d721 --- /dev/null +++ b/target/linux/mediatek/patches/0023-thermal-Add-Mediatek-thermal-controller-support.patch @@ -0,0 +1,785 @@ +From 014330a304100782a26bc7df02778c8c386b2857 Mon Sep 17 00:00:00 2001 +From: Sascha Hauer <s.hauer@pengutronix.de> +Date: Wed, 13 May 2015 10:52:42 +0200 +Subject: [PATCH 23/76] thermal: Add Mediatek thermal controller support + +This adds support for the Mediatek thermal controller found on MT8173 +and likely other SoCs. +The controller is a bit special. It does not have its own ADC, instead +it controls the on-SoC AUXADC via AHB bus accesses. For this reason +we need the physical address of the AUXADC. Also it controls a mux +using AHB bus accesses, so we need the APMIXEDSYS physical address aswell. + +Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> +--- + drivers/thermal/Kconfig | 8 + + drivers/thermal/Makefile | 1 + + drivers/thermal/mtk_thermal.c | 728 +++++++++++++++++++++++++++++++++++++++++ + 3 files changed, 737 insertions(+) + create mode 100644 drivers/thermal/mtk_thermal.c + +diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig +index af40db0..3aa5500 100644 +--- a/drivers/thermal/Kconfig ++++ b/drivers/thermal/Kconfig +@@ -285,6 +285,14 @@ config ACPI_THERMAL_REL + tristate + depends on ACPI + ++config MTK_THERMAL ++ tristate "Temperature sensor driver for mediatek SoCs" ++ depends on ARCH_MEDIATEK || COMPILE_TEST ++ default y ++ help ++ Enable this option if you want to have support for thermal management ++ controller present in Mediatek SoCs ++ + menu "Texas Instruments thermal drivers" + source "drivers/thermal/ti-soc-thermal/Kconfig" + endmenu +diff --git a/drivers/thermal/Makefile b/drivers/thermal/Makefile +index fa0dc48..51cfab7 100644 +--- a/drivers/thermal/Makefile ++++ b/drivers/thermal/Makefile +@@ -39,3 +39,4 @@ obj-$(CONFIG_TI_SOC_THERMAL) += ti-soc-thermal/ + obj-$(CONFIG_INT340X_THERMAL) += int340x_thermal/ + obj-$(CONFIG_ST_THERMAL) += st/ + obj-$(CONFIG_TEGRA_SOCTHERM) += tegra_soctherm.o ++obj-$(CONFIG_MTK_THERMAL) += mtk_thermal.o +diff --git a/drivers/thermal/mtk_thermal.c b/drivers/thermal/mtk_thermal.c +new file mode 100644 +index 0000000..27aab12 +--- /dev/null ++++ b/drivers/thermal/mtk_thermal.c +@@ -0,0 +1,728 @@ ++/* ++ * Copyright (c) 2014 MediaTek Inc. ++ * Author: Hanyi.Wu <hanyi.wu@mediatek.com> ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ */ ++ ++#include <linux/kernel.h> ++#include <linux/module.h> ++#include <linux/dmi.h> ++#include <linux/thermal.h> ++#include <linux/platform_device.h> ++#include <linux/types.h> ++#include <linux/delay.h> ++#include <linux/slab.h> ++#include <linux/clk.h> ++#include <linux/time.h> ++#include <linux/of.h> ++#include <linux/of_irq.h> ++#include <linux/of_address.h> ++#include <linux/interrupt.h> ++#include <linux/reset.h> ++ ++/* AUXADC Registers */ ++#define AUXADC_CON0_V 0x000 ++#define AUXADC_CON1_V 0x004 ++#define AUXADC_CON1_SET_V 0x008 ++#define AUXADC_CON1_CLR_V 0x00c ++#define AUXADC_CON2_V 0x010 ++#define AUXADC_DATA(channel) (0x14 + (channel) * 4) ++#define AUXADC_MISC_V 0x094 ++ ++#define AUXADC_CON1_CHANNEL(x) (1 << (x)) ++ ++/* Thermal Controller Registers */ ++#define TEMPMONCTL0 0x000 ++#define TEMPMONCTL1 0x004 ++#define TEMPMONCTL2 0x008 ++#define TEMPMONINT 0x00c ++#define TEMPMONINTSTS 0x010 ++#define TEMPMONIDET0 0x014 ++#define TEMPMONIDET1 0x018 ++#define TEMPMONIDET2 0x01c ++#define TEMPH2NTHRE 0x024 ++#define TEMPHTHRE 0x028 ++#define TEMPCTHRE 0x02c ++#define TEMPOFFSETH 0x030 ++#define TEMPOFFSETL 0x034 ++#define TEMPMSRCTL0 0x038 ++#define TEMPMSRCTL1 0x03c ++#define TEMPAHBPOLL 0x040 ++#define TEMPAHBTO 0x044 ++#define TEMPADCPNP0 0x048 ++#define TEMPADCPNP1 0x04c ++#define TEMPADCPNP2 0x050 ++#define TEMPADCPNP3 0x0b4 ++ ++#define TEMPADCMUX 0x054 ++#define TEMPADCEXT 0x058 ++#define TEMPADCEXT1 0x05c ++#define TEMPADCEN 0x060 ++#define TEMPPNPMUXADDR 0x064 ++#define TEMPADCMUXADDR 0x068 ++#define TEMPADCEXTADDR 0x06c ++#define TEMPADCEXT1ADDR 0x070 ++#define TEMPADCENADDR 0x074 ++#define TEMPADCVALIDADDR 0x078 ++#define TEMPADCVOLTADDR 0x07c ++#define TEMPRDCTRL 0x080 ++#define TEMPADCVALIDMASK 0x084 ++#define TEMPADCVOLTAGESHIFT 0x088 ++#define TEMPADCWRITECTRL 0x08c ++#define TEMPMSR0 0x090 ++#define TEMPMSR1 0x094 ++#define TEMPMSR2 0x098 ++#define TEMPMSR3 0x0B8 ++ ++#define TEMPIMMD0 0x0a0 ++#define TEMPIMMD1 0x0a4 ++#define TEMPIMMD2 0x0a8 ++ ++#define TEMPPROTCTL 0x0c0 ++#define TEMPPROTTA 0x0c4 ++#define TEMPPROTTB 0x0c8 ++#define TEMPPROTTC 0x0cc ++ ++#define TEMPSPARE0 0x0f0 ++#define TEMPSPARE1 0x0f4 ++#define TEMPSPARE2 0x0f8 ++#define TEMPSPARE3 0x0fc ++ ++#define PTPCORESEL 0x400 ++#define THERMINTST 0x404 ++#define PTPODINTST 0x408 ++#define THSTAGE0ST 0x40c ++#define THSTAGE1ST 0x410 ++#define THSTAGE2ST 0x414 ++#define THAHBST0 0x418 ++#define THAHBST1 0x41c /* Only for DE debug */ ++#define PTPSPARE0 0x420 ++#define PTPSPARE1 0x424 ++#define PTPSPARE2 0x428 ++#define PTPSPARE3 0x42c ++#define THSLPEVEB 0x430 ++ ++#define TEMPMONINT_COLD(sp) ((1 << 0) << ((sp) * 5)) ++#define TEMPMONINT_HOT(sp) ((1 << 1) << ((sp) * 5)) ++#define TEMPMONINT_LOW_OFS(sp) ((1 << 2) << ((sp) * 5)) ++#define TEMPMONINT_HIGH_OFS(sp) ((1 << 3) << ((sp) * 5)) ++#define TEMPMONINT_HOT_TO_NORM(sp) ((1 << 4) << ((sp) * 5)) ++#define TEMPMONINT_TIMEOUT (1 << 15) ++#define TEMPMONINT_IMMEDIATE_SENSE(sp) (1 << (16 + (sp))) ++#define TEMPMONINT_FILTER_SENSE(sp) (1 << (19 + (sp))) ++ ++#define TEMPADCWRITECTRL_ADC_PNP_WRITE (1 << 0) ++#define TEMPADCWRITECTRL_ADC_MUX_WRITE (1 << 1) ++#define TEMPADCWRITECTRL_ADC_EXTRA_WRITE (1 << 2) ++#define TEMPADCWRITECTRL_ADC_EXTRA1_WRITE (1 << 3) ++ ++#define TEMPADCVALIDMASK_VALID_HIGH (1 << 5) ++#define TEMPADCVALIDMASK_VALID_POS(bit) (bit) ++ ++#define TEMPPROTCTL_AVERAGE (0 << 16) ++#define TEMPPROTCTL_MAXIMUM (1 << 16) ++#define TEMPPROTCTL_SELECTED (2 << 16) ++ ++#define MT8173_THERMAL_ZONE_CA57 0 ++#define MT8173_THERMAL_ZONE_CA53 1 ++#define MT8173_THERMAL_ZONE_GPU 2 ++#define MT8173_THERMAL_ZONE_CORE 3 ++ ++#define MT8173_TS1 0 ++#define MT8173_TS2 1 ++#define MT8173_TS3 2 ++#define MT8173_TS4 3 ++#define MT8173_TSABB 4 ++ ++/* AUXADC channel 11 is used for the temperature sensors */ ++#define MT8173_TEMP_AUXADC_CHANNEL 11 ++ ++/* The total number of temperature sensors in the MT8173 */ ++#define MT8173_NUM_SENSORS 5 ++ ++/* The number of banks in the MT8173 */ ++#define MT8173_NUM_BANKS 4 ++ ++/* The number of sensing points per bank */ ++#define MT8173_NUM_SENSING_POINTS 4 ++ ++#define THERMAL_NAME "mtk-thermal" ++ ++struct mtk_thermal; ++ ++struct mtk_thermal_bank { ++ struct mtk_thermal *mt; ++ struct thermal_zone_device *tz; ++ int id; ++}; ++ ++struct mtk_thermal { ++ struct device *dev; ++ void __iomem *thermal_base; ++ void __iomem *auxadc_base; ++ ++ u64 auxadc_phys_base; ++ u64 apmixed_phys_base; ++ struct reset_control *reset; ++ struct clk *clk_peri_therm; ++ struct clk *clk_auxadc; ++ ++ struct mtk_thermal_bank banks[MT8173_NUM_BANKS]; ++ ++ struct mutex lock; ++ ++ /* Calibration values */ ++ s32 adc_ge; ++ s32 adc_oe; ++ s32 degc_cali; ++ s32 o_slope; ++ s32 vts; ++}; ++ ++struct mtk_thermal_bank_cfg { ++ unsigned int enable_mask; ++ unsigned int sensors[4]; ++}; ++ ++static int sensor_mux_values[MT8173_NUM_SENSORS] = { 0, 1, 2, 3, 16 }; ++ ++/* ++ * The MT8173 thermal controller has four banks. Each bank can read up to ++ * four temperature sensors simultaneously. The MT8173 has a total of 5 ++ * temperature sensors. We use each bank to measure a certain area of the ++ * SoC. Since TS2 is located centrally in the SoC it is influenced by multiple ++ * areas, hence is used in different banks. ++ */ ++static struct mtk_thermal_bank_cfg bank_data[] = { ++ { ++ .enable_mask = 3, ++ .sensors = { MT8173_TS2, MT8173_TS3 }, ++ }, { ++ .enable_mask = 3, ++ .sensors = { MT8173_TS2, MT8173_TS4 }, ++ }, { ++ .enable_mask = 7, ++ .sensors = { MT8173_TS1, MT8173_TS2, MT8173_TSABB }, ++ }, { ++ .enable_mask = 1, ++ .sensors = { MT8173_TS2 }, ++ }, ++}; ++ ++static int tempmsr_ofs[MT8173_NUM_SENSING_POINTS] = { ++ TEMPMSR0, TEMPMSR1, TEMPMSR2, TEMPMSR3 ++}; ++ ++static int tempadcpnp_ofs[MT8173_NUM_SENSING_POINTS] = { ++ TEMPADCPNP0, TEMPADCPNP1, TEMPADCPNP2, TEMPADCPNP3 ++}; ++ ++/** ++ * raw_to_mcelsius - convert a raw ADC value to mcelsius ++ * @mt: The thermal controller ++ * @raw: raw ADC value ++ * ++ * This converts the raw ADC value to mcelsius using the SoC specific ++ * calibration constants ++ */ ++static int raw_to_mcelsius(struct mtk_thermal *mt, u32 raw) ++{ ++ s32 format_1, format_2, format_3, format_4; ++ s32 xtoomt; ++ s32 gain; ++ ++ raw &= 0xfff; ++ ++ gain = (10000 + mt->adc_ge); ++ ++ xtoomt = ((((mt->vts + 3350 - mt->adc_oe) * 10000) / 4096) * 10000) / ++ gain; ++ ++ format_1 = ((mt->degc_cali * 10) >> 1); ++ format_2 = (raw - mt->adc_oe); ++ format_3 = (((((format_2) * 10000) >> 12) * 10000) / gain) - xtoomt; ++ format_3 = format_3 * 15 / 18; ++ format_4 = ((format_3 * 100) / (165 + mt->o_slope)); ++ format_4 = format_4 - (format_4 << 1); ++ ++ return (format_1 + format_4) * 100; ++} ++ ++/** ++ * mcelsius_to_raw - convert mcelsius to raw ADC value ++ * @mt: The thermal controller ++ * @temp: The temperature in mcelsius ++ * ++ * This converts a temperature in mcelsius to a raw ADC value, needed to ++ * calculate the trigger values for interrupt generation. ++ */ ++static u32 mcelsius_to_raw(struct mtk_thermal *mt, int temp) ++{ ++ s32 format_1, format_2, format_3, format_4; ++ s32 xtoomt; ++ s32 gain; ++ ++ gain = (10000 + mt->adc_ge); ++ ++ xtoomt = ((((mt->vts + 3350 - mt->adc_oe) * 10000) / 4096) * 10000) / ++ gain; ++ ++ format_1 = temp - (mt->degc_cali * 1000 / 2); ++ format_2 = format_1 * (165 + mt->o_slope) * 18 / 15; ++ format_2 = format_2 - 2 * format_2; ++ format_3 = format_2 / 1000 + xtoomt * 10; ++ format_4 = (format_3 * 4096 / 10000 * gain) / 100000 + mt->adc_oe; ++ ++ return format_4; ++} ++ ++/** ++ * mtk_thermal_get_bank - get bank ++ * @bank: The bank ++ * ++ * The bank registers are banked, we have to select a bank in the ++ * PTPCORESEL register to access it. ++ */ ++static void mtk_thermal_get_bank(struct mtk_thermal_bank *bank) ++{ ++ struct mtk_thermal *mt = bank->mt; ++ u32 val; ++ ++ mutex_lock(&mt->lock); ++ ++ val = readl(mt->thermal_base + PTPCORESEL); ++ val &= ~0xf; ++ val |= bank->id; ++ writel(val, mt->thermal_base + PTPCORESEL); ++} ++ ++/** ++ * mtk_thermal_put_bank - release bank ++ * @bank: The bank ++ * ++ * release a bank previously taken with mtk_thermal_get_bank, ++ */ ++static void mtk_thermal_put_bank(struct mtk_thermal_bank *bank) ++{ ++ struct mtk_thermal *mt = bank->mt; ++ ++ mutex_unlock(&mt->lock); ++} ++ ++/** ++ * mtk_thermal_bank_temperature - get the temperature of a bank ++ * @bank: The bank ++ * ++ * The temperature of a bank is considered the maximum temperature of ++ * the sensors associated to the bank. ++ */ ++static int mtk_thermal_bank_temperature(struct mtk_thermal_bank *bank) ++{ ++ struct mtk_thermal *mt = bank->mt; ++ int temp, i, max; ++ u32 raw; ++ ++ temp = max = -INT_MAX; ++ ++ for (i = 0; i < 4; i++) { ++ int sensno; ++ ++ if (!(bank_data[bank->id].enable_mask & (1 << i))) ++ continue; ++ ++ raw = readl(mt->thermal_base + tempmsr_ofs[i]); ++ ++ sensno = bank_data[bank->id].sensors[i]; ++ temp = raw_to_mcelsius(mt, raw); ++ ++ if (temp > max) ++ max = temp; ++ } ++ ++ return max; ++} ++ ++static void mtk_thermal_irq_bank(struct mtk_thermal_bank *bank) ++{ ++ struct mtk_thermal *mt = bank->mt; ++ int sp; ++ u32 irqstat; ++ bool update = false; ++ ++ mtk_thermal_get_bank(bank); ++ ++ irqstat = readl(mt->thermal_base + TEMPMONINTSTS); ++ ++ mtk_thermal_put_bank(bank); ++ ++ for (sp = 0; sp < 3; sp++) { ++ if (irqstat & TEMPMONINT_LOW_OFS(sp)) { ++ update = true; ++ dev_vdbg(mt->dev, "bank %d sensor %d low offset interrupt\n", ++ bank->id, sp); ++ } ++ ++ if (irqstat & TEMPMONINT_HIGH_OFS(sp)) { ++ update = true; ++ dev_vdbg(mt->dev, "bank %d sensor %d high offset interrupt\n", ++ bank->id, sp); ++ } ++ } ++ ++ if (update) ++ thermal_zone_device_update(bank->tz); ++} ++ ++static irqreturn_t mtk_thermal_irq(int irq, void *dev_id) ++{ ++ struct mtk_thermal *mt = dev_id; ++ u32 irqstat = 0; ++ int i; ++ ++ irqstat = readl(mt->thermal_base + THERMINTST); ++ ++ dev_vdbg(mt->dev, "thermal_interrupt_handler : THERMINTST = 0x%x\n", ++ irqstat); ++ ++ for (i = 0; i < MT8173_NUM_BANKS; i++) { ++ if (!(irqstat & (1 << i))) ++ mtk_thermal_irq_bank(&mt->banks[i]); ++ } ++ ++ return IRQ_HANDLED; ++} ++ ++static int mtk_read_temp(void *data, int *temp) ++{ ++ struct mtk_thermal_bank *bank = data; ++ ++ mtk_thermal_get_bank(bank); ++ ++ *temp = mtk_thermal_bank_temperature(bank); ++ ++ mtk_thermal_put_bank(bank); ++ ++ return 0; ++} ++ ++static int mtk_set_trips(void *data, int low, int high) ++{ ++ struct mtk_thermal_bank *bank = data; ++ struct mtk_thermal *mt = bank->mt; ++ int i; ++ u32 val, enable_mask; ++ u32 raw_low, raw_high; ++ ++ raw_low = mcelsius_to_raw(mt, low); ++ raw_high = mcelsius_to_raw(mt, high); ++ ++ mtk_thermal_get_bank(bank); ++ ++ writel(0x0, mt->thermal_base + TEMPMONINT); ++ ++ writel(TEMPPROTCTL_SELECTED, mt->thermal_base + TEMPPROTCTL); ++ ++ writel(raw_low, mt->thermal_base + TEMPOFFSETL); ++ writel(raw_high, mt->thermal_base + TEMPOFFSETH); ++ ++ enable_mask = readl(mt->thermal_base + TEMPMONCTL0); ++ ++ val = 0; ++ for (i = 0; i < MT8173_NUM_SENSING_POINTS; i++) ++ if (enable_mask & (1 << i)) ++ val |= TEMPMONINT_LOW_OFS(i) | TEMPMONINT_HIGH_OFS(i); ++ ++ writel(val, mt->thermal_base + TEMPMONINT); ++ ++ mtk_thermal_put_bank(bank); ++ ++ dev_dbg(mt->dev, "new boundaries: %d (0x%04x) < x < %d (0x%04x)\n", ++ low, mcelsius_to_raw(mt, low), ++ high, mcelsius_to_raw(mt, high)); ++ ++ return 0; ++} ++ ++static const struct thermal_zone_of_device_ops mtk_thermal_ops = { ++ .get_temp = mtk_read_temp, ++ .set_trips = mtk_set_trips, ++}; ++ ++static void mtk_thermal_init_bank(struct mtk_thermal_bank *bank) ++{ ++ struct mtk_thermal *mt = bank->mt; ++ struct mtk_thermal_bank_cfg *cfg = &bank_data[bank->id]; ++ int i; ++ ++ mtk_thermal_get_bank(bank); ++ ++ /* bus clock 66M counting unit is 12 * 15.15ns * 256 = 46.540us */ ++ writel(0x0000000c, mt->thermal_base + TEMPMONCTL1); ++ ++ /* ++ * filt interval is 1 * 46.540us = 46.54us, ++ * sen interval is 429 * 46.540us = 19.96ms ++ */ ++ writel(0x000101ad, mt->thermal_base + TEMPMONCTL2); ++ ++ /* poll is set to 10u */ ++ writel(0x00000300, mt->thermal_base + TEMPAHBPOLL); ++ ++ /* temperature sampling control, 1 sample */ ++ writel(0x00000000, mt->thermal_base + TEMPMSRCTL0); ++ ++ /* exceed this polling time, IRQ would be inserted */ ++ writel(0xffffffff, mt->thermal_base + TEMPAHBTO); ++ ++ /* number of interrupts per event, 1 is enough */ ++ writel(0x0, mt->thermal_base + TEMPMONIDET0); ++ writel(0x0, mt->thermal_base + TEMPMONIDET1); ++ ++ /* ++ * The MT8173 thermal controller does not have its own ADC. Instead it ++ * uses AHB bus accesses to control the AUXADC. To do this the thermal ++ * controller has to be programmed with the physical addresses of the ++ * AUXADC registers and with the various bit positions in the AUXADC. ++ * Also the thermal controller controls a mux in the APMIXEDSYS register ++ * space. ++ */ ++ ++ /* ++ * this value will be stored to TEMPPNPMUXADDR (TEMPSPARE0) ++ * automatically by hw ++ */ ++ writel(1 << MT8173_TEMP_AUXADC_CHANNEL, mt->thermal_base + TEMPADCMUX); ++ ++ /* AHB address for auxadc mux selection */ ++ writel(mt->auxadc_phys_base + 0x00c, ++ mt->thermal_base + TEMPADCMUXADDR); ++ ++ /* AHB address for pnp sensor mux selection */ ++ writel(mt->apmixed_phys_base + 0x0604, ++ mt->thermal_base + TEMPPNPMUXADDR); ++ ++ /* AHB value for auxadc enable */ ++ writel(1 << MT8173_TEMP_AUXADC_CHANNEL, mt->thermal_base + TEMPADCEN); ++ ++ /* AHB address for auxadc enable (channel 0 immediate mode selected) */ ++ writel(mt->auxadc_phys_base + AUXADC_CON1_SET_V, ++ mt->thermal_base + TEMPADCENADDR); ++ ++ /* AHB address for auxadc valid bit */ ++ writel(mt->auxadc_phys_base + AUXADC_DATA(MT8173_TEMP_AUXADC_CHANNEL), ++ mt->thermal_base + TEMPADCVALIDADDR); ++ ++ /* AHB address for auxadc voltage output */ ++ writel(mt->auxadc_phys_base + AUXADC_DATA(MT8173_TEMP_AUXADC_CHANNEL), ++ mt->thermal_base + TEMPADCVOLTADDR); ++ ++ /* read valid & voltage are at the same register */ ++ writel(0x0, mt->thermal_base + TEMPRDCTRL); ++ ++ /* indicate where the valid bit is */ ++ writel(TEMPADCVALIDMASK_VALID_HIGH | TEMPADCVALIDMASK_VALID_POS(12), ++ mt->thermal_base + TEMPADCVALIDMASK); ++ ++ /* no shift */ ++ writel(0x0, mt->thermal_base + TEMPADCVOLTAGESHIFT); ++ ++ /* enable auxadc mux write transaction */ ++ writel(TEMPADCWRITECTRL_ADC_MUX_WRITE, ++ mt->thermal_base + TEMPADCWRITECTRL); ++ ++ for (i = 0; i < MT8173_NUM_SENSING_POINTS; i++) ++ writel(sensor_mux_values[cfg->sensors[i]], ++ mt->thermal_base + tempadcpnp_ofs[i]); ++ ++ writel(cfg->enable_mask, mt->thermal_base + TEMPMONCTL0); ++ ++ writel(TEMPADCWRITECTRL_ADC_PNP_WRITE | TEMPADCWRITECTRL_ADC_MUX_WRITE, ++ mt->thermal_base + TEMPADCWRITECTRL); ++ ++ mtk_thermal_put_bank(bank); ++} ++ ++static u64 of_get_phys_base(struct device_node *np) ++{ ++ u64 size64; ++ const __be32 *regaddr_p; ++ ++ regaddr_p = of_get_address(np, 0, &size64, NULL); ++ if (!regaddr_p) ++ return OF_BAD_ADDR; ++ ++ return of_translate_address(np, regaddr_p); ++} ++ ++static int mtk_thermal_probe(struct platform_device *pdev) ++{ ++ int ret, i; ++ struct device_node *auxadc, *apmixedsys, *np = pdev->dev.of_node; ++ int irq; ++ struct mtk_thermal *mt; ++ struct resource *res; ++ ++ mt = devm_kzalloc(&pdev->dev, sizeof(*mt), GFP_KERNEL); ++ if (!mt) ++ return -ENOMEM; ++ ++ mt->clk_peri_therm = devm_clk_get(&pdev->dev, "therm"); ++ if (IS_ERR(mt->clk_peri_therm)) ++ return PTR_ERR(mt->clk_peri_therm); ++ ++ mt->clk_auxadc = devm_clk_get(&pdev->dev, "auxadc"); ++ if (IS_ERR(mt->clk_auxadc)) ++ return PTR_ERR(mt->clk_auxadc); ++ ++ res = platform_get_resource(pdev, IORESOURCE_MEM, 0); ++ mt->thermal_base = devm_ioremap_resource(&pdev->dev, res); ++ if (IS_ERR(mt->thermal_base)) ++ return PTR_ERR(mt->thermal_base); ++ ++ mt->reset = devm_reset_control_get(&pdev->dev, "therm"); ++ if (IS_ERR(mt->reset)) { ++ ret = PTR_ERR(mt->reset); ++ dev_err(&pdev->dev, "cannot get reset: %d\n", ret); ++ return ret; ++ } ++ ++ mutex_init(&mt->lock); ++ ++ mt->dev = &pdev->dev; ++ ++ auxadc = of_parse_phandle(np, "auxadc", 0); ++ if (!auxadc) { ++ dev_err(&pdev->dev, "missing auxadc node\n"); ++ return -ENODEV; ++ } ++ ++ mt->auxadc_phys_base = of_get_phys_base(auxadc); ++ if (mt->auxadc_phys_base == OF_BAD_ADDR) { ++ dev_err(&pdev->dev, "Can't get auxadc phys address\n"); ++ return -EINVAL; ++ } ++ ++ apmixedsys = of_parse_phandle(np, "apmixedsys", 0); ++ if (!apmixedsys) { ++ dev_err(&pdev->dev, "missing apmixedsys node\n"); ++ return -ENODEV; ++ } ++ ++ mt->apmixed_phys_base = of_get_phys_base(apmixedsys); ++ if (mt->apmixed_phys_base == OF_BAD_ADDR) { ++ dev_err(&pdev->dev, "Can't get auxadc phys address\n"); ++ return -EINVAL; ++ } ++ ++ irq = platform_get_irq(pdev, 0); ++ if (!irq) { ++ dev_err(&pdev->dev, "Can't find irq\n"); ++ return -EINVAL; ++ } ++ ++ ret = devm_request_threaded_irq(&pdev->dev, irq, NULL, mtk_thermal_irq, ++ IRQF_ONESHOT, THERMAL_NAME, mt); ++ if (ret) { ++ dev_err(&pdev->dev, "Can't request irq %d: %d\n", irq, ret); ++ return ret; ++ } ++ ++ ret = clk_prepare_enable(mt->clk_auxadc); ++ if (ret) { ++ dev_err(&pdev->dev, "Can't enable auxadc clk: %d\n", ret); ++ return ret; ++ } ++ ++ reset_control_reset(mt->reset); ++ ++ ret = clk_prepare_enable(mt->clk_peri_therm); ++ if (ret) { ++ dev_err(&pdev->dev, "Can't enable peri clk: %d\n", ret); ++ goto err_enable_clk; ++ } ++ ++ /* ++ * These calibration values should finally be provided by the ++ * firmware or fuses. For now use default values. ++ */ ++ mt->adc_ge = ((512 - 512) * 10000) / 4096; ++ mt->adc_oe = 512 - 512; ++ mt->degc_cali = 40; ++ mt->o_slope = 0; ++ mt->vts = 260; ++ ++ for (i = 0; i < MT8173_NUM_BANKS; i++) { ++ struct mtk_thermal_bank *bank = &mt->banks[i]; ++ ++ bank->id = i; ++ bank->mt = mt; ++ mtk_thermal_init_bank(&mt->banks[i]); ++ } ++ ++ platform_set_drvdata(pdev, mt); ++ ++ /* ++ * This is needed after initialising the banks because otherwise ++ * the first temperature read contains bogus high temperatures which ++ * immediately cause a system shutdown. ++ */ ++ msleep(100); ++ ++ for (i = 0; i < MT8173_NUM_BANKS; i++) { ++ struct mtk_thermal_bank *bank = &mt->banks[i]; ++ ++ bank->tz = thermal_zone_of_sensor_register(&pdev->dev, i, bank, ++ &mtk_thermal_ops); ++ } ++ ++ return 0; ++ ++err_enable_clk: ++ clk_disable_unprepare(mt->clk_peri_therm); ++ ++ return ret; ++} ++ ++static int mtk_thermal_remove(struct platform_device *pdev) ++{ ++ struct mtk_thermal *mt = platform_get_drvdata(pdev); ++ int i; ++ ++ for (i = 0; i < MT8173_NUM_BANKS; i++) { ++ struct mtk_thermal_bank *bank = &mt->banks[i]; ++ ++ if (!IS_ERR(bank)) ++ thermal_zone_of_sensor_unregister(&pdev->dev, bank->tz); ++ } ++ ++ clk_disable_unprepare(mt->clk_peri_therm); ++ clk_disable_unprepare(mt->clk_auxadc); ++ ++ return 0; ++} ++ ++static const struct of_device_id mtk_thermal_of_match[] = { ++ { ++ .compatible = "mediatek,mt8173-thermal", ++ }, { ++ }, ++}; ++ ++static struct platform_driver mtk_thermal_driver = { ++ .probe = mtk_thermal_probe, ++ .remove = mtk_thermal_remove, ++ .driver = { ++ .name = THERMAL_NAME, ++ .of_match_table = mtk_thermal_of_match, ++ }, ++}; ++ ++module_platform_driver(mtk_thermal_driver); +-- +1.7.10.4 + |