trunk-47381HEADmaster

1 files changed, 159 insertions, 0 deletions

diff --git a/package/network/services/hostapd/files/hostapd-mini.config b/package/network/services/hostapd/files/hostapd-mini.config
new file mode 100644
index 0000000..118d97c
--- /dev/null
+++ b/package/network/services/hostapd/files/hostapd-mini.config
@@ -0,0 +1,159 @@
+# Example hostapd build time configuration
+#
+# This file lists the configuration options that are used when building the
+# hostapd binary. All lines starting with # are ignored. Configuration option
+# lines must be commented out complete, if they are not to be included, i.e.,
+# just setting VARIABLE=n is not disabling that variable.
+#
+# This file is included in Makefile, so variables like CFLAGS and LIBS can also
+# be modified from here. In most cass, these lines should use += in order not
+# to override previous values of the variables.
+
+# Driver interface for Host AP driver
+CONFIG_DRIVER_HOSTAP=y
+
+# Driver interface for wired authenticator
+CONFIG_DRIVER_WIRED=y
+
+# Driver interface for Prism54 driver
+#CONFIG_DRIVER_PRISM54=y
+
+# Driver interface for drivers using the nl80211 kernel interface
+CONFIG_DRIVER_NL80211=y
+# driver_nl80211.c requires a rather new libnl (version 1.1) which may not be
+# shipped with your distribution yet. If that is the case, you need to build
+# newer libnl version and point the hostapd build to use it.
+#LIBNL=/usr/src/libnl
+#CFLAGS += -I$(LIBNL)/include
+#LIBS += -L$(LIBNL)/lib
+
+# Driver interface for FreeBSD net80211 layer (e.g., Atheros driver)
+#CONFIG_DRIVER_BSD=y
+#CFLAGS += -I/usr/local/include
+#LIBS += -L/usr/local/lib
+
+# Driver interface for no driver (e.g., RADIUS server only)
+#CONFIG_DRIVER_NONE=y
+
+# IEEE 802.11F/IAPP
+# CONFIG_IAPP=y
+
+# WPA2/IEEE 802.11i RSN pre-authentication
+CONFIG_RSN_PREAUTH=y
+
+# PeerKey handshake for Station to Station Link (IEEE 802.11e DLS)
+CONFIG_PEERKEY=y
+
+# IEEE 802.11w (management frame protection)
+# This version is an experimental implementation based on IEEE 802.11w/D1.0
+# draft and is subject to change since the standard has not yet been finalized.
+# Driver support is also needed for IEEE 802.11w.
+#CONFIG_IEEE80211W=y
+
+# Integrated EAP server
+#CONFIG_EAP=y
+
+# EAP-MD5 for the integrated EAP server
+#CONFIG_EAP_MD5=y
+
+# EAP-TLS for the integrated EAP server
+#CONFIG_EAP_TLS=y
+
+# EAP-MSCHAPv2 for the integrated EAP server
+#CONFIG_EAP_MSCHAPV2=y
+
+# EAP-PEAP for the integrated EAP server
+#CONFIG_EAP_PEAP=y
+
+# EAP-GTC for the integrated EAP server
+#CONFIG_EAP_GTC=y
+
+# EAP-TTLS for the integrated EAP server
+#CONFIG_EAP_TTLS=y
+
+# EAP-SIM for the integrated EAP server
+#CONFIG_EAP_SIM=y
+
+# EAP-AKA for the integrated EAP server
+#CONFIG_EAP_AKA=y
+
+# EAP-AKA' for the integrated EAP server
+# This requires CONFIG_EAP_AKA to be enabled, too.
+#CONFIG_EAP_AKA_PRIME=y
+
+# EAP-PAX for the integrated EAP server
+#CONFIG_EAP_PAX=y
+
+# EAP-PSK for the integrated EAP server (this is _not_ needed for WPA-PSK)
+#CONFIG_EAP_PSK=y
+
+# EAP-SAKE for the integrated EAP server
+#CONFIG_EAP_SAKE=y
+
+# EAP-GPSK for the integrated EAP server
+#CONFIG_EAP_GPSK=y
+# Include support for optional SHA256 cipher suite in EAP-GPSK
+#CONFIG_EAP_GPSK_SHA256=y
+
+# EAP-FAST for the integrated EAP server
+# Note: Default OpenSSL package does not include support for all the
+# functionality needed for EAP-FAST. If EAP-FAST is enabled with OpenSSL,
+# the OpenSSL library must be patched (openssl-0.9.9-session-ticket.patch)
+# to add the needed functions.
+#CONFIG_EAP_FAST=y
+
+# Wi-Fi Protected Setup (WPS)
+#CONFIG_WPS=y
+# Enable UPnP support for external WPS Registrars
+#CONFIG_WPS_UPNP=y
+
+# EAP-IKEv2
+#CONFIG_EAP_IKEV2=y
+
+# Trusted Network Connect (EAP-TNC)
+#CONFIG_EAP_TNC=y
+
+# PKCS#12 (PFX) support (used to read private key and certificate file from
+# a file that usually has extension .p12 or .pfx)
+#CONFIG_PKCS12=y
+
+# RADIUS authentication server. This provides access to the integrated EAP
+# server from external hosts using RADIUS.
+#CONFIG_RADIUS_SERVER=y
+
+# Build IPv6 support for RADIUS operations
+#CONFIG_IPV6=y
+
+# IEEE Std 802.11r-2008 (Fast BSS Transition)
+#CONFIG_IEEE80211R=y
+
+# Use the hostapd's IEEE 802.11 authentication (ACL), but without
+# the IEEE 802.11 Management capability (e.g. FreeBSD/net80211)
+#CONFIG_DRIVER_RADIUS_ACL=y
+
+# IEEE 802.11n (High Throughput) support
+CONFIG_IEEE80211N=y
+
+# IEEE 802.11ac (Very High Throughput) support
+CONFIG_IEEE80211AC=y
+
+# Remove debugging code that is printing out debug messages to stdout.
+# This can be used to reduce the size of the hostapd considerably if debugging
+# code is not needed.
+#CONFIG_NO_STDOUT_DEBUG=y
+
+# Remove support for RADIUS accounting
+CONFIG_NO_ACCOUNTING=y
+
+# Remove support for RADIUS
+CONFIG_NO_RADIUS=y
+
+# Remove support for VLANs
+#CONFIG_NO_VLAN=y
+
+CONFIG_TLS=internal
+
+CONFIG_NO_RANDOM_POOL=y
+CONFIG_NO_DUMP_STATE=y
+
+CONFIG_UBUS=y