diff options
Diffstat (limited to 'target/linux/sunxi/patches-4.1/128-1-mtd-nand-store-timing-in-nand_chip.patch')
| -rw-r--r-- | target/linux/sunxi/patches-4.1/128-1-mtd-nand-store-timing-in-nand_chip.patch | 182 |
1 files changed, 182 insertions, 0 deletions
diff --git a/target/linux/sunxi/patches-4.1/128-1-mtd-nand-store-timing-in-nand_chip.patch b/target/linux/sunxi/patches-4.1/128-1-mtd-nand-store-timing-in-nand_chip.patch new file mode 100644 index 0000000..5867dbb --- /dev/null +++ b/target/linux/sunxi/patches-4.1/128-1-mtd-nand-store-timing-in-nand_chip.patch @@ -0,0 +1,182 @@ +--- a/drivers/mtd/nand/nand_base.c ++++ b/drivers/mtd/nand/nand_base.c +@@ -4249,6 +4249,8 @@ static inline bool is_full_id_nand(struc + static bool find_full_id_nand(struct mtd_info *mtd, struct nand_chip *chip, + struct nand_flash_dev *type, const u8 *id_data, int *busw) + { ++ int mode; ++ + if (!strncmp(type->id, id_data, type->id_len)) { + mtd->writesize = type->pagesize; + mtd->erasesize = type->erasesize; +@@ -4259,8 +4261,9 @@ static bool find_full_id_nand(struct mtd + chip->options |= type->options; + chip->ecc_strength_ds = NAND_ECC_STRENGTH(type); + chip->ecc_step_ds = NAND_ECC_STEP(type); +- chip->onfi_timing_mode_default = +- type->onfi_timing_mode_default; ++ ++ mode = type->onfi_timing_mode_default; ++ chip->sdr_timings = onfi_async_timing_mode_to_sdr_timings(mode); + + *busw = type->options & NAND_BUSWIDTH_16; + +--- a/drivers/mtd/nand/sunxi_nand.c ++++ b/drivers/mtd/nand/sunxi_nand.c +@@ -1425,7 +1425,7 @@ static int sunxi_nand_chip_init_timings( + + mode = onfi_get_async_timing_mode(&chip->nand); + if (mode == ONFI_TIMING_MODE_UNKNOWN) { +- mode = chip->nand.onfi_timing_mode_default; ++ timings = chip->nand.sdr_timings; + } else { + uint8_t feature[ONFI_SUBFEATURE_PARAM_LEN] = {}; + +@@ -1439,9 +1439,10 @@ static int sunxi_nand_chip_init_timings( + feature); + if (ret) + return ret; ++ ++ timings = onfi_async_timing_mode_to_sdr_timings(mode); + } + +- timings = onfi_async_timing_mode_to_sdr_timings(mode); + if (IS_ERR(timings)) + return PTR_ERR(timings); + +--- a/include/linux/mtd/nand.h ++++ b/include/linux/mtd/nand.h +@@ -612,6 +612,55 @@ struct nand_buffers { + uint8_t *databuf; + }; + ++/* ++ * struct nand_sdr_timings - SDR NAND chip timings ++ * ++ * This struct defines the timing requirements of a SDR NAND chip. ++ * These informations can be found in every NAND datasheets and the timings ++ * meaning are described in the ONFI specifications: ++ * www.onfi.org/~/media/ONFI/specs/onfi_3_1_spec.pdf (chapter 4.15 Timing ++ * Parameters) ++ * ++ * All these timings are expressed in picoseconds. ++ */ ++ ++struct nand_sdr_timings { ++ u32 tALH_min; ++ u32 tADL_min; ++ u32 tALS_min; ++ u32 tAR_min; ++ u32 tCEA_max; ++ u32 tCEH_min; ++ u32 tCH_min; ++ u32 tCHZ_max; ++ u32 tCLH_min; ++ u32 tCLR_min; ++ u32 tCLS_min; ++ u32 tCOH_min; ++ u32 tCS_min; ++ u32 tDH_min; ++ u32 tDS_min; ++ u32 tFEAT_max; ++ u32 tIR_min; ++ u32 tITC_max; ++ u32 tRC_min; ++ u32 tREA_max; ++ u32 tREH_min; ++ u32 tRHOH_min; ++ u32 tRHW_min; ++ u32 tRHZ_max; ++ u32 tRLOH_min; ++ u32 tRP_min; ++ u32 tRR_min; ++ u64 tRST_max; ++ u32 tWB_max; ++ u32 tWC_min; ++ u32 tWH_min; ++ u32 tWHR_min; ++ u32 tWP_min; ++ u32 tWW_min; ++}; ++ + /** + * struct nand_chip - NAND Private Flash Chip Data + * @IO_ADDR_R: [BOARDSPECIFIC] address to read the 8 I/O lines of the +@@ -676,11 +725,7 @@ struct nand_buffers { + * @ecc_step_ds: [INTERN] ECC step required by the @ecc_strength_ds, + * also from the datasheet. It is the recommended ECC step + * size, if known; if unknown, set to zero. +- * @onfi_timing_mode_default: [INTERN] default ONFI timing mode. This field is +- * either deduced from the datasheet if the NAND +- * chip is not ONFI compliant or set to 0 if it is +- * (an ONFI chip is always configured in mode 0 +- * after a NAND reset) ++ * @sdr_timings [INTERN] Pointer to default timings for SDR NAND. + * @numchips: [INTERN] number of physical chips + * @chipsize: [INTERN] the size of one chip for multichip arrays + * @pagemask: [INTERN] page number mask = number of (pages / chip) - 1 +@@ -769,7 +814,7 @@ struct nand_chip { + uint8_t bits_per_cell; + uint16_t ecc_strength_ds; + uint16_t ecc_step_ds; +- int onfi_timing_mode_default; ++ const struct nand_sdr_timings *sdr_timings; + int badblockpos; + int badblockbits; + +@@ -1156,55 +1201,6 @@ struct ofnandpart_data { + int ofnandpart_parse(struct mtd_info *master, + const struct ofnandpart_data *data); + +-/* +- * struct nand_sdr_timings - SDR NAND chip timings +- * +- * This struct defines the timing requirements of a SDR NAND chip. +- * These informations can be found in every NAND datasheets and the timings +- * meaning are described in the ONFI specifications: +- * www.onfi.org/~/media/ONFI/specs/onfi_3_1_spec.pdf (chapter 4.15 Timing +- * Parameters) +- * +- * All these timings are expressed in picoseconds. +- */ +- +-struct nand_sdr_timings { +- u32 tALH_min; +- u32 tADL_min; +- u32 tALS_min; +- u32 tAR_min; +- u32 tCEA_max; +- u32 tCEH_min; +- u32 tCH_min; +- u32 tCHZ_max; +- u32 tCLH_min; +- u32 tCLR_min; +- u32 tCLS_min; +- u32 tCOH_min; +- u32 tCS_min; +- u32 tDH_min; +- u32 tDS_min; +- u32 tFEAT_max; +- u32 tIR_min; +- u32 tITC_max; +- u32 tRC_min; +- u32 tREA_max; +- u32 tREH_min; +- u32 tRHOH_min; +- u32 tRHW_min; +- u32 tRHZ_max; +- u32 tRLOH_min; +- u32 tRP_min; +- u32 tRR_min; +- u64 tRST_max; +- u32 tWB_max; +- u32 tWC_min; +- u32 tWH_min; +- u32 tWHR_min; +- u32 tWP_min; +- u32 tWW_min; +-}; +- + /* get timing characteristics from ONFI timing mode. */ + const struct nand_sdr_timings *onfi_async_timing_mode_to_sdr_timings(int mode); + #endif /* __LINUX_MTD_NAND_H */ |