aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/sunxi/patches-3.18/271-crypto-add-ss.patch
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/sunxi/patches-3.18/271-crypto-add-ss.patch')
-rw-r--r--target/linux/sunxi/patches-3.18/271-crypto-add-ss.patch1493
1 files changed, 1493 insertions, 0 deletions
diff --git a/target/linux/sunxi/patches-3.18/271-crypto-add-ss.patch b/target/linux/sunxi/patches-3.18/271-crypto-add-ss.patch
new file mode 100644
index 0000000..0788c6f
--- /dev/null
+++ b/target/linux/sunxi/patches-3.18/271-crypto-add-ss.patch
@@ -0,0 +1,1493 @@
+--- a/drivers/crypto/Kconfig
++++ b/drivers/crypto/Kconfig
+@@ -437,4 +437,21 @@ config CRYPTO_DEV_QCE
+ hardware. To compile this driver as a module, choose M here. The
+ module will be called qcrypto.
+
++config CRYPTO_DEV_SUNXI_SS
++ tristate "Support for Allwinner Security System cryptographic accelerator"
++ depends on ARCH_SUNXI
++ select CRYPTO_MD5
++ select CRYPTO_SHA1
++ select CRYPTO_AES
++ select CRYPTO_DES
++ select CRYPTO_BLKCIPHER
++ help
++ Some Allwinner SoC have a crypto accelerator named
++ Security System. Select this if you want to use it.
++ The Security System handle AES/DES/3DES ciphers in CBC mode
++ and SHA1 and MD5 hash algorithms.
++
++ To compile this driver as a module, choose M here: the module
++ will be called sunxi-ss.
++
+ endif # CRYPTO_HW
+--- a/drivers/crypto/Makefile
++++ b/drivers/crypto/Makefile
+@@ -25,3 +25,4 @@ obj-$(CONFIG_CRYPTO_DEV_TALITOS) += tali
+ obj-$(CONFIG_CRYPTO_DEV_UX500) += ux500/
+ obj-$(CONFIG_CRYPTO_DEV_QAT) += qat/
+ obj-$(CONFIG_CRYPTO_DEV_QCE) += qce/
++obj-$(CONFIG_CRYPTO_DEV_SUNXI_SS) += sunxi-ss/
+--- /dev/null
++++ b/drivers/crypto/sunxi-ss/Makefile
+@@ -0,0 +1,2 @@
++obj-$(CONFIG_CRYPTO_DEV_SUNXI_SS) += sunxi-ss.o
++sunxi-ss-y += sunxi-ss-core.o sunxi-ss-hash.o sunxi-ss-cipher.o
+--- /dev/null
++++ b/drivers/crypto/sunxi-ss/sunxi-ss-cipher.c
+@@ -0,0 +1,489 @@
++/*
++ * sunxi-ss-cipher.c - hardware cryptographic accelerator for Allwinner A20 SoC
++ *
++ * Copyright (C) 2013-2014 Corentin LABBE <clabbe.montjoie@gmail.com>
++ *
++ * This file add support for AES cipher with 128,192,256 bits
++ * keysize in CBC mode.
++ * Add support also for DES and 3DES in CBC mode.
++ *
++ * You could find the datasheet in Documentation/arm/sunxi/README
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ */
++#include "sunxi-ss.h"
++
++extern struct sunxi_ss_ctx *ss;
++
++static int sunxi_ss_cipher(struct ablkcipher_request *areq, u32 mode)
++{
++ struct crypto_ablkcipher *tfm = crypto_ablkcipher_reqtfm(areq);
++ struct sunxi_tfm_ctx *op = crypto_ablkcipher_ctx(tfm);
++ const char *cipher_type;
++
++ if (areq->nbytes == 0)
++ return 0;
++
++ if (areq->info == NULL) {
++ dev_err(ss->dev, "ERROR: Empty IV\n");
++ return -EINVAL;
++ }
++
++ if (areq->src == NULL || areq->dst == NULL) {
++ dev_err(ss->dev, "ERROR: Some SGs are NULL\n");
++ return -EINVAL;
++ }
++
++ cipher_type = crypto_tfm_alg_name(crypto_ablkcipher_tfm(tfm));
++
++ if (strcmp("cbc(aes)", cipher_type) == 0) {
++ mode |= SS_OP_AES | SS_CBC | SS_ENABLED | op->keymode;
++ return sunxi_ss_aes_poll(areq, mode);
++ }
++
++ if (strcmp("cbc(des)", cipher_type) == 0) {
++ mode |= SS_OP_DES | SS_CBC | SS_ENABLED | op->keymode;
++ return sunxi_ss_des_poll(areq, mode);
++ }
++
++ if (strcmp("cbc(des3_ede)", cipher_type) == 0) {
++ mode |= SS_OP_3DES | SS_CBC | SS_ENABLED | op->keymode;
++ return sunxi_ss_des_poll(areq, mode);
++ }
++
++ dev_err(ss->dev, "ERROR: Cipher %s not handled\n", cipher_type);
++ return -EINVAL;
++}
++
++int sunxi_ss_cipher_encrypt(struct ablkcipher_request *areq)
++{
++ return sunxi_ss_cipher(areq, SS_ENCRYPTION);
++}
++
++int sunxi_ss_cipher_decrypt(struct ablkcipher_request *areq)
++{
++ return sunxi_ss_cipher(areq, SS_DECRYPTION);
++}
++
++int sunxi_ss_cipher_init(struct crypto_tfm *tfm)
++{
++ struct sunxi_tfm_ctx *op = crypto_tfm_ctx(tfm);
++
++ memset(op, 0, sizeof(struct sunxi_tfm_ctx));
++ return 0;
++}
++
++/*
++ * Optimized function for the case where we have only one SG,
++ * so we can use kmap_atomic
++ */
++static int sunxi_ss_aes_poll_atomic(struct ablkcipher_request *areq)
++{
++ u32 spaces;
++ struct scatterlist *in_sg = areq->src;
++ struct scatterlist *out_sg = areq->dst;
++ void *src_addr;
++ void *dst_addr;
++ unsigned int ileft = areq->nbytes;
++ unsigned int oleft = areq->nbytes;
++ unsigned int todo;
++ u32 *src32;
++ u32 *dst32;
++ u32 rx_cnt = 32;
++ u32 tx_cnt = 0;
++ int i;
++
++ src_addr = kmap_atomic(sg_page(in_sg)) + in_sg->offset;
++ if (src_addr == NULL) {
++ dev_err(ss->dev, "kmap_atomic error for src SG\n");
++ writel(0, ss->base + SS_CTL);
++ mutex_unlock(&ss->lock);
++ return -EINVAL;
++ }
++
++ dst_addr = kmap_atomic(sg_page(out_sg)) + out_sg->offset;
++ if (dst_addr == NULL) {
++ dev_err(ss->dev, "kmap_atomic error for dst SG\n");
++ writel(0, ss->base + SS_CTL);
++ kunmap_atomic(src_addr);
++ mutex_unlock(&ss->lock);
++ return -EINVAL;
++ }
++
++ src32 = (u32 *)src_addr;
++ dst32 = (u32 *)dst_addr;
++ ileft = areq->nbytes / 4;
++ oleft = areq->nbytes / 4;
++ i = 0;
++ do {
++ if (ileft > 0 && rx_cnt > 0) {
++ todo = min(rx_cnt, ileft);
++ ileft -= todo;
++ do {
++ writel_relaxed(*src32++,
++ ss->base +
++ SS_RXFIFO);
++ todo--;
++ } while (todo > 0);
++ }
++ if (tx_cnt > 0) {
++ todo = min(tx_cnt, oleft);
++ oleft -= todo;
++ do {
++ *dst32++ = readl_relaxed(ss->base +
++ SS_TXFIFO);
++ todo--;
++ } while (todo > 0);
++ }
++ spaces = readl_relaxed(ss->base + SS_FCSR);
++ rx_cnt = SS_RXFIFO_SPACES(spaces);
++ tx_cnt = SS_TXFIFO_SPACES(spaces);
++ } while (oleft > 0);
++ writel(0, ss->base + SS_CTL);
++ kunmap_atomic(src_addr);
++ kunmap_atomic(dst_addr);
++ mutex_unlock(&ss->lock);
++ return 0;
++}
++
++int sunxi_ss_aes_poll(struct ablkcipher_request *areq, u32 mode)
++{
++ u32 spaces;
++ struct crypto_ablkcipher *tfm = crypto_ablkcipher_reqtfm(areq);
++ struct sunxi_tfm_ctx *op = crypto_ablkcipher_ctx(tfm);
++ unsigned int ivsize = crypto_ablkcipher_ivsize(tfm);
++ /* when activating SS, the default FIFO space is 32 */
++ u32 rx_cnt = 32;
++ u32 tx_cnt = 0;
++ u32 v;
++ int i;
++ struct scatterlist *in_sg = areq->src;
++ struct scatterlist *out_sg = areq->dst;
++ void *src_addr;
++ void *dst_addr;
++ unsigned int ileft = areq->nbytes;
++ unsigned int oleft = areq->nbytes;
++ unsigned int sgileft = areq->src->length;
++ unsigned int sgoleft = areq->dst->length;
++ unsigned int todo;
++ u32 *src32;
++ u32 *dst32;
++
++ mutex_lock(&ss->lock);
++
++ for (i = 0; i < op->keylen; i += 4)
++ writel(*(op->key + i/4), ss->base + SS_KEY0 + i);
++
++ if (areq->info != NULL) {
++ for (i = 0; i < 4 && i < ivsize / 4; i++) {
++ v = *(u32 *)(areq->info + i * 4);
++ writel(v, ss->base + SS_IV0 + i * 4);
++ }
++ }
++ writel(mode, ss->base + SS_CTL);
++
++ /* If we have only one SG, we can use kmap_atomic */
++ if (sg_next(in_sg) == NULL && sg_next(out_sg) == NULL)
++ return sunxi_ss_aes_poll_atomic(areq);
++
++ /*
++ * If we have more than one SG, we cannot use kmap_atomic since
++ * we hold the mapping too long
++ */
++ src_addr = kmap(sg_page(in_sg)) + in_sg->offset;
++ if (src_addr == NULL) {
++ dev_err(ss->dev, "KMAP error for src SG\n");
++ mutex_unlock(&ss->lock);
++ return -EINVAL;
++ }
++ dst_addr = kmap(sg_page(out_sg)) + out_sg->offset;
++ if (dst_addr == NULL) {
++ kunmap(sg_page(in_sg));
++ dev_err(ss->dev, "KMAP error for dst SG\n");
++ mutex_unlock(&ss->lock);
++ return -EINVAL;
++ }
++ src32 = (u32 *)src_addr;
++ dst32 = (u32 *)dst_addr;
++ ileft = areq->nbytes / 4;
++ oleft = areq->nbytes / 4;
++ sgileft = in_sg->length / 4;
++ sgoleft = out_sg->length / 4;
++ do {
++ spaces = readl_relaxed(ss->base + SS_FCSR);
++ rx_cnt = SS_RXFIFO_SPACES(spaces);
++ tx_cnt = SS_TXFIFO_SPACES(spaces);
++ todo = min3(rx_cnt, ileft, sgileft);
++ if (todo > 0) {
++ ileft -= todo;
++ sgileft -= todo;
++ }
++ while (todo > 0) {
++ writel_relaxed(*src32++, ss->base + SS_RXFIFO);
++ todo--;
++ }
++ if (in_sg != NULL && sgileft == 0 && ileft > 0) {
++ kunmap(sg_page(in_sg));
++ in_sg = sg_next(in_sg);
++ while (in_sg != NULL && in_sg->length == 0)
++ in_sg = sg_next(in_sg);
++ if (in_sg != NULL && ileft > 0) {
++ src_addr = kmap(sg_page(in_sg)) + in_sg->offset;
++ if (src_addr == NULL) {
++ dev_err(ss->dev, "ERROR: KMAP for src SG\n");
++ mutex_unlock(&ss->lock);
++ return -EINVAL;
++ }
++ src32 = src_addr;
++ sgileft = in_sg->length / 4;
++ }
++ }
++ /* do not test oleft since when oleft == 0 we have finished */
++ todo = min3(tx_cnt, oleft, sgoleft);
++ if (todo > 0) {
++ oleft -= todo;
++ sgoleft -= todo;
++ }
++ while (todo > 0) {
++ *dst32++ = readl_relaxed(ss->base + SS_TXFIFO);
++ todo--;
++ }
++ if (out_sg != NULL && sgoleft == 0 && oleft >= 0) {
++ kunmap(sg_page(out_sg));
++ out_sg = sg_next(out_sg);
++ while (out_sg != NULL && out_sg->length == 0)
++ out_sg = sg_next(out_sg);
++ if (out_sg != NULL && oleft > 0) {
++ dst_addr = kmap(sg_page(out_sg)) +
++ out_sg->offset;
++ if (dst_addr == NULL) {
++ dev_err(ss->dev, "KMAP error\n");
++ mutex_unlock(&ss->lock);
++ return -EINVAL;
++ }
++ dst32 = dst_addr;
++ sgoleft = out_sg->length / 4;
++ }
++ }
++ } while (oleft > 0);
++
++ writel_relaxed(0, ss->base + SS_CTL);
++ mutex_unlock(&ss->lock);
++ return 0;
++}
++
++/*
++ * Pure CPU way of doing DES/3DES with SS
++ * Since DES and 3DES SGs could be smaller than 4 bytes, I use sg_copy_to_buffer
++ * for "linearize" them.
++ * The problem with that is that I alloc (2 x areq->nbytes) for buf_in/buf_out
++ * TODO: change this system, I need to support other mode than CBC where len
++ * is not a multiple of 4 and the hack of linearize use too much memory
++ * SGsrc -> buf_in -> SS -> buf_out -> SGdst
++ */
++int sunxi_ss_des_poll(struct ablkcipher_request *areq, u32 mode)
++{
++ u32 value, spaces;
++ size_t nb_in_sg_tx, nb_in_sg_rx;
++ size_t ir, it;
++ struct crypto_ablkcipher *tfm = crypto_ablkcipher_reqtfm(areq);
++ struct sunxi_tfm_ctx *op = crypto_ablkcipher_ctx(tfm);
++ unsigned int ivsize = crypto_ablkcipher_ivsize(tfm);
++ u32 tx_cnt = 0;
++ u32 rx_cnt = 0;
++ u32 v;
++ int i;
++ int no_chunk = 1;
++ struct scatterlist *in_sg = areq->src;
++ struct scatterlist *out_sg = areq->dst;
++
++ /*
++ * if we have only SGs with size multiple of 4,
++ * we can use the SS AES function
++ */
++ while (in_sg != NULL && no_chunk == 1) {
++ if ((in_sg->length % 4) != 0)
++ no_chunk = 0;
++ in_sg = sg_next(in_sg);
++ }
++ while (out_sg != NULL && no_chunk == 1) {
++ if ((out_sg->length % 4) != 0)
++ no_chunk = 0;
++ out_sg = sg_next(out_sg);
++ }
++
++ if (no_chunk == 1)
++ return sunxi_ss_aes_poll(areq, mode);
++
++ in_sg = areq->src;
++ out_sg = areq->dst;
++
++ nb_in_sg_rx = sg_nents(in_sg);
++ nb_in_sg_tx = sg_nents(out_sg);
++
++ /*
++ * buf_in and buf_out are allocated only one time
++ * then we keep the buffer until driver end
++ * the allocation can only grow more
++ * we do not reduce it for simplification
++ */
++ mutex_lock(&ss->bufin_lock);
++ if (ss->buf_in == NULL) {
++ ss->buf_in = kmalloc(areq->nbytes, GFP_KERNEL);
++ ss->buf_in_size = areq->nbytes;
++ } else {
++ if (areq->nbytes > ss->buf_in_size) {
++ kfree(ss->buf_in);
++ ss->buf_in = kmalloc(areq->nbytes, GFP_KERNEL);
++ ss->buf_in_size = areq->nbytes;
++ }
++ }
++ if (ss->buf_in == NULL) {
++ ss->buf_in_size = 0;
++ mutex_unlock(&ss->bufin_lock);
++ dev_err(ss->dev, "Unable to allocate pages.\n");
++ return -ENOMEM;
++ }
++ mutex_lock(&ss->bufout_lock);
++ if (ss->buf_out == NULL) {
++ ss->buf_out = kmalloc(areq->nbytes, GFP_KERNEL);
++ if (ss->buf_out == NULL) {
++ ss->buf_out_size = 0;
++ mutex_unlock(&ss->bufin_lock);
++ mutex_unlock(&ss->bufout_lock);
++ dev_err(ss->dev, "Unable to allocate pages.\n");
++ return -ENOMEM;
++ }
++ ss->buf_out_size = areq->nbytes;
++ } else {
++ if (areq->nbytes > ss->buf_out_size) {
++ kfree(ss->buf_out);
++ ss->buf_out = kmalloc(areq->nbytes, GFP_KERNEL);
++ if (ss->buf_out == NULL) {
++ ss->buf_out_size = 0;
++ mutex_unlock(&ss->bufin_lock);
++ mutex_unlock(&ss->bufout_lock);
++ dev_err(ss->dev, "Unable to allocate pages.\n");
++ return -ENOMEM;
++ }
++ ss->buf_out_size = areq->nbytes;
++ }
++ }
++
++ sg_copy_to_buffer(areq->src, nb_in_sg_rx, ss->buf_in, areq->nbytes);
++
++ ir = 0;
++ it = 0;
++ mutex_lock(&ss->lock);
++
++ for (i = 0; i < op->keylen; i += 4)
++ writel(*(op->key + i/4), ss->base + SS_KEY0 + i);
++ if (areq->info != NULL) {
++ for (i = 0; i < 4 && i < ivsize / 4; i++) {
++ v = *(u32 *)(areq->info + i * 4);
++ writel(v, ss->base + SS_IV0 + i * 4);
++ }
++ }
++ writel(mode, ss->base + SS_CTL);
++
++ do {
++ if (rx_cnt == 0 || tx_cnt == 0) {
++ spaces = readl(ss->base + SS_FCSR);
++ rx_cnt = SS_RXFIFO_SPACES(spaces);
++ tx_cnt = SS_TXFIFO_SPACES(spaces);
++ }
++ if (rx_cnt > 0 && ir < areq->nbytes) {
++ do {
++ value = *(u32 *)(ss->buf_in + ir);
++ writel(value, ss->base + SS_RXFIFO);
++ ir += 4;
++ rx_cnt--;
++ } while (rx_cnt > 0 && ir < areq->nbytes);
++ }
++ if (tx_cnt > 0 && it < areq->nbytes) {
++ do {
++ value = readl(ss->base + SS_TXFIFO);
++ *(u32 *)(ss->buf_out + it) = value;
++ it += 4;
++ tx_cnt--;
++ } while (tx_cnt > 0 && it < areq->nbytes);
++ }
++ if (ir == areq->nbytes) {
++ mutex_unlock(&ss->bufin_lock);
++ ir++;
++ }
++ } while (it < areq->nbytes);
++
++ writel(0, ss->base + SS_CTL);
++ mutex_unlock(&ss->lock);
++
++ /*
++ * a simple optimization, since we dont need the hardware for this copy
++ * we release the lock and do the copy. With that we gain 5/10% perf
++ */
++ sg_copy_from_buffer(areq->dst, nb_in_sg_tx, ss->buf_out, areq->nbytes);
++
++ mutex_unlock(&ss->bufout_lock);
++ return 0;
++}
++
++/* check and set the AES key, prepare the mode to be used */
++int sunxi_ss_aes_setkey(struct crypto_ablkcipher *tfm, const u8 *key,
++ unsigned int keylen)
++{
++ struct sunxi_tfm_ctx *op = crypto_ablkcipher_ctx(tfm);
++
++ switch (keylen) {
++ case 128 / 8:
++ op->keymode = SS_AES_128BITS;
++ break;
++ case 192 / 8:
++ op->keymode = SS_AES_192BITS;
++ break;
++ case 256 / 8:
++ op->keymode = SS_AES_256BITS;
++ break;
++ default:
++ dev_err(ss->dev, "ERROR: Invalid keylen %u\n", keylen);
++ crypto_ablkcipher_set_flags(tfm, CRYPTO_TFM_RES_BAD_KEY_LEN);
++ return -EINVAL;
++ }
++ op->keylen = keylen;
++ memcpy(op->key, key, keylen);
++ return 0;
++}
++
++/* check and set the DES key, prepare the mode to be used */
++int sunxi_ss_des_setkey(struct crypto_ablkcipher *tfm, const u8 *key,
++ unsigned int keylen)
++{
++ struct sunxi_tfm_ctx *op = crypto_ablkcipher_ctx(tfm);
++
++ if (keylen != DES_KEY_SIZE) {
++ dev_err(ss->dev, "Invalid keylen %u\n", keylen);
++ crypto_ablkcipher_set_flags(tfm, CRYPTO_TFM_RES_BAD_KEY_LEN);
++ return -EINVAL;
++ }
++ op->keylen = keylen;
++ memcpy(op->key, key, keylen);
++ return 0;
++}
++
++/* check and set the 3DES key, prepare the mode to be used */
++int sunxi_ss_des3_setkey(struct crypto_ablkcipher *tfm, const u8 *key,
++ unsigned int keylen)
++{
++ struct sunxi_tfm_ctx *op = crypto_ablkcipher_ctx(tfm);
++
++ if (keylen != 3 * DES_KEY_SIZE) {
++ dev_err(ss->dev, "Invalid keylen %u\n", keylen);
++ crypto_ablkcipher_set_flags(tfm, CRYPTO_TFM_RES_BAD_KEY_LEN);
++ return -EINVAL;
++ }
++ op->keylen = keylen;
++ memcpy(op->key, key, keylen);
++ return 0;
++}
+--- /dev/null
++++ b/drivers/crypto/sunxi-ss/sunxi-ss-core.c
+@@ -0,0 +1,318 @@
++/*
++ * sunxi-ss-core.c - hardware cryptographic accelerator for Allwinner A20 SoC
++ *
++ * Copyright (C) 2013-2014 Corentin LABBE <clabbe.montjoie@gmail.com>
++ *
++ * Core file which registers crypto algorithms supported by the SS.
++ *
++ * You could find a link for the datasheet in Documentation/arm/sunxi/README
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ */
++#include <linux/clk.h>
++#include <linux/crypto.h>
++#include <linux/io.h>
++#include <linux/module.h>
++#include <linux/of.h>
++#include <linux/platform_device.h>
++#include <crypto/scatterwalk.h>
++#include <linux/scatterlist.h>
++#include <linux/interrupt.h>
++#include <linux/delay.h>
++
++#include "sunxi-ss.h"
++
++struct sunxi_ss_ctx *ss;
++
++/*
++ * General notes for whole driver:
++ *
++ * After each request the device must be disabled with a write of 0 in SS_CTL
++ *
++ * For performance reason, we use writel_relaxed/read_relaxed for all
++ * operations on RX and TX FIFO and also SS_FCSR.
++ * Excepts for the last write on TX FIFO.
++ * For all other registers, we use writel/readl.
++ * See http://permalink.gmane.org/gmane.linux.ports.arm.kernel/117644
++ * and http://permalink.gmane.org/gmane.linux.ports.arm.kernel/117640
++ */
++
++static struct ahash_alg sunxi_md5_alg = {
++ .init = sunxi_hash_init,
++ .update = sunxi_hash_update,
++ .final = sunxi_hash_final,
++ .finup = sunxi_hash_finup,
++ .digest = sunxi_hash_digest,
++ .halg = {
++ .digestsize = MD5_DIGEST_SIZE,
++ .base = {
++ .cra_name = "md5",
++ .cra_driver_name = "md5-sunxi-ss",
++ .cra_priority = 300,
++ .cra_alignmask = 3,
++ .cra_flags = CRYPTO_ALG_TYPE_AHASH | CRYPTO_ALG_ASYNC,
++ .cra_blocksize = MD5_HMAC_BLOCK_SIZE,
++ .cra_ctxsize = sizeof(struct sunxi_req_ctx),
++ .cra_module = THIS_MODULE,
++ .cra_type = &crypto_ahash_type,
++ .cra_init = sunxi_hash_crainit
++ }
++ }
++};
++
++static struct ahash_alg sunxi_sha1_alg = {
++ .init = sunxi_hash_init,
++ .update = sunxi_hash_update,
++ .final = sunxi_hash_final,
++ .finup = sunxi_hash_finup,
++ .digest = sunxi_hash_digest,
++ .halg = {
++ .digestsize = SHA1_DIGEST_SIZE,
++ .base = {
++ .cra_name = "sha1",
++ .cra_driver_name = "sha1-sunxi-ss",
++ .cra_priority = 300,
++ .cra_alignmask = 3,
++ .cra_flags = CRYPTO_ALG_TYPE_AHASH | CRYPTO_ALG_ASYNC,
++ .cra_blocksize = SHA1_BLOCK_SIZE,
++ .cra_ctxsize = sizeof(struct sunxi_req_ctx),
++ .cra_module = THIS_MODULE,
++ .cra_type = &crypto_ahash_type,
++ .cra_init = sunxi_hash_crainit
++ }
++ }
++};
++
++static struct crypto_alg sunxi_cipher_algs[] = {
++{
++ .cra_name = "cbc(aes)",
++ .cra_driver_name = "cbc-aes-sunxi-ss",
++ .cra_priority = 300,
++ .cra_blocksize = AES_BLOCK_SIZE,
++ .cra_flags = CRYPTO_ALG_TYPE_ABLKCIPHER,
++ .cra_ctxsize = sizeof(struct sunxi_tfm_ctx),
++ .cra_module = THIS_MODULE,
++ .cra_alignmask = 3,
++ .cra_type = &crypto_ablkcipher_type,
++ .cra_init = sunxi_ss_cipher_init,
++ .cra_u = {
++ .ablkcipher = {
++ .min_keysize = AES_MIN_KEY_SIZE,
++ .max_keysize = AES_MAX_KEY_SIZE,
++ .ivsize = AES_BLOCK_SIZE,
++ .setkey = sunxi_ss_aes_setkey,
++ .encrypt = sunxi_ss_cipher_encrypt,
++ .decrypt = sunxi_ss_cipher_decrypt,
++ }
++ }
++}, {
++ .cra_name = "cbc(des)",
++ .cra_driver_name = "cbc-des-sunxi-ss",
++ .cra_priority = 300,
++ .cra_blocksize = DES_BLOCK_SIZE,
++ .cra_flags = CRYPTO_ALG_TYPE_ABLKCIPHER,
++ .cra_ctxsize = sizeof(struct sunxi_req_ctx),
++ .cra_module = THIS_MODULE,
++ .cra_alignmask = 3,
++ .cra_type = &crypto_ablkcipher_type,
++ .cra_init = sunxi_ss_cipher_init,
++ .cra_u.ablkcipher = {
++ .min_keysize = DES_KEY_SIZE,
++ .max_keysize = DES_KEY_SIZE,
++ .ivsize = DES_BLOCK_SIZE,
++ .setkey = sunxi_ss_des_setkey,
++ .encrypt = sunxi_ss_cipher_encrypt,
++ .decrypt = sunxi_ss_cipher_decrypt,
++ }
++}, {
++ .cra_name = "cbc(des3_ede)",
++ .cra_driver_name = "cbc-des3-sunxi-ss",
++ .cra_priority = 300,
++ .cra_blocksize = DES3_EDE_BLOCK_SIZE,
++ .cra_flags = CRYPTO_ALG_TYPE_ABLKCIPHER,
++ .cra_ctxsize = sizeof(struct sunxi_req_ctx),
++ .cra_module = THIS_MODULE,
++ .cra_alignmask = 3,
++ .cra_type = &crypto_ablkcipher_type,
++ .cra_init = sunxi_ss_cipher_init,
++ .cra_u.ablkcipher = {
++ .min_keysize = DES3_EDE_KEY_SIZE,
++ .max_keysize = DES3_EDE_KEY_SIZE,
++ .ivsize = DES3_EDE_BLOCK_SIZE,
++ .setkey = sunxi_ss_des3_setkey,
++ .encrypt = sunxi_ss_cipher_encrypt,
++ .decrypt = sunxi_ss_cipher_decrypt,
++ }
++}
++};
++
++static int sunxi_ss_probe(struct platform_device *pdev)
++{
++ struct resource *res;
++ u32 v;
++ int err;
++ unsigned long cr;
++ const unsigned long cr_ahb = 24 * 1000 * 1000;
++ const unsigned long cr_mod = 150 * 1000 * 1000;
++
++ if (!pdev->dev.of_node)
++ return -ENODEV;
++
++ ss = devm_kzalloc(&pdev->dev, sizeof(*ss), GFP_KERNEL);
++ if (ss == NULL)
++ return -ENOMEM;
++
++ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++ ss->base = devm_ioremap_resource(&pdev->dev, res);
++ if (IS_ERR(ss->base)) {
++ dev_err(&pdev->dev, "Cannot request MMIO\n");
++ return PTR_ERR(ss->base);
++ }
++
++ ss->ssclk = devm_clk_get(&pdev->dev, "mod");
++ if (IS_ERR(ss->ssclk)) {
++ err = PTR_ERR(ss->ssclk);
++ dev_err(&pdev->dev, "Cannot get SS clock err=%d\n", err);
++ return err;
++ }
++ dev_dbg(&pdev->dev, "clock ss acquired\n");
++
++ ss->busclk = devm_clk_get(&pdev->dev, "ahb");
++ if (IS_ERR(ss->busclk)) {
++ err = PTR_ERR(ss->busclk);
++ dev_err(&pdev->dev, "Cannot get AHB SS clock err=%d\n", err);
++ return err;
++ }
++ dev_dbg(&pdev->dev, "clock ahb_ss acquired\n");
++
++ /* Enable both clocks */
++ err = clk_prepare_enable(ss->busclk);
++ if (err != 0) {
++ dev_err(&pdev->dev, "Cannot prepare_enable busclk\n");
++ return err;
++ }
++ err = clk_prepare_enable(ss->ssclk);
++ if (err != 0) {
++ dev_err(&pdev->dev, "Cannot prepare_enable ssclk\n");
++ clk_disable_unprepare(ss->busclk);
++ return err;
++ }
++
++ /*
++ * Check that clock have the correct rates gived in the datasheet
++ * Try to set the clock to the maximum allowed
++ */
++ err = clk_set_rate(ss->ssclk, cr_mod);
++ if (err != 0) {
++ dev_err(&pdev->dev, "Cannot set clock rate to ssclk\n");
++ clk_disable_unprepare(ss->ssclk);
++ clk_disable_unprepare(ss->busclk);
++ return err;
++ }
++
++ cr = clk_get_rate(ss->busclk);
++ if (cr >= cr_ahb)
++ dev_dbg(&pdev->dev, "Clock bus %lu (%lu MHz) (must be >= %lu)\n",
++ cr, cr / 1000000, cr_ahb);
++ else
++ dev_warn(&pdev->dev, "Clock bus %lu (%lu MHz) (must be >= %lu)\n",
++ cr, cr / 1000000, cr_ahb);
++
++ cr = clk_get_rate(ss->ssclk);
++ if (cr <= cr_mod)
++ if (cr < cr_mod)
++ dev_info(&pdev->dev, "Clock ss %lu (%lu MHz) (must be <= %lu)\n",
++ cr, cr / 1000000, cr_mod);
++ else
++ dev_dbg(&pdev->dev, "Clock ss %lu (%lu MHz) (must be <= %lu)\n",
++ cr, cr / 1000000, cr_mod);
++ else
++ dev_warn(&pdev->dev, "Clock ss is at %lu (%lu MHz) (must be <= %lu)\n",
++ cr, cr / 1000000, cr_mod);
++
++ /*
++ * Datasheet named it "Die Bonding ID"
++ * I expect to be a sort of Security System Revision number.
++ * Since the A80 seems to have an other version of SS
++ * this info could be useful
++ */
++ writel(SS_ENABLED, ss->base + SS_CTL);
++ v = readl(ss->base + SS_CTL);
++ v >>= 16;
++ v &= 0x07;
++ dev_info(&pdev->dev, "Die ID %d\n", v);
++ writel(0, ss->base + SS_CTL);
++
++ ss->dev = &pdev->dev;
++
++ mutex_init(&ss->lock);
++ mutex_init(&ss->bufin_lock);
++ mutex_init(&ss->bufout_lock);
++
++ err = crypto_register_ahash(&sunxi_md5_alg);
++ if (err)
++ goto error_md5;
++ err = crypto_register_ahash(&sunxi_sha1_alg);
++ if (err)
++ goto error_sha1;
++ err = crypto_register_algs(sunxi_cipher_algs,
++ ARRAY_SIZE(sunxi_cipher_algs));
++ if (err)
++ goto error_ciphers;
++
++ return 0;
++error_ciphers:
++ crypto_unregister_ahash(&sunxi_sha1_alg);
++error_sha1:
++ crypto_unregister_ahash(&sunxi_md5_alg);
++error_md5:
++ clk_disable_unprepare(ss->ssclk);
++ clk_disable_unprepare(ss->busclk);
++ return err;
++}
++
++static int __exit sunxi_ss_remove(struct platform_device *pdev)
++{
++ if (!pdev->dev.of_node)
++ return 0;
++
++ crypto_unregister_ahash(&sunxi_md5_alg);
++ crypto_unregister_ahash(&sunxi_sha1_alg);
++ crypto_unregister_algs(sunxi_cipher_algs,
++ ARRAY_SIZE(sunxi_cipher_algs));
++
++ if (ss->buf_in != NULL)
++ kfree(ss->buf_in);
++ if (ss->buf_out != NULL)
++ kfree(ss->buf_out);
++
++ writel(0, ss->base + SS_CTL);
++ clk_disable_unprepare(ss->busclk);
++ clk_disable_unprepare(ss->ssclk);
++ return 0;
++}
++
++static const struct of_device_id a20ss_crypto_of_match_table[] = {
++ { .compatible = "allwinner,sun7i-a20-crypto" },
++ {}
++};
++MODULE_DEVICE_TABLE(of, a20ss_crypto_of_match_table);
++
++static struct platform_driver sunxi_ss_driver = {
++ .probe = sunxi_ss_probe,
++ .remove = __exit_p(sunxi_ss_remove),
++ .driver = {
++ .owner = THIS_MODULE,
++ .name = "sunxi-ss",
++ .of_match_table = a20ss_crypto_of_match_table,
++ },
++};
++
++module_platform_driver(sunxi_ss_driver);
++
++MODULE_DESCRIPTION("Allwinner Security System cryptographic accelerator");
++MODULE_LICENSE("GPL");
++MODULE_AUTHOR("Corentin LABBE <clabbe.montjoie@gmail.com>");
+--- /dev/null
++++ b/drivers/crypto/sunxi-ss/sunxi-ss-hash.c
+@@ -0,0 +1,445 @@
++/*
++ * sunxi-ss-hash.c - hardware cryptographic accelerator for Allwinner A20 SoC
++ *
++ * Copyright (C) 2013-2014 Corentin LABBE <clabbe.montjoie@gmail.com>
++ *
++ * This file add support for MD5 and SHA1.
++ *
++ * You could find the datasheet in Documentation/arm/sunxi/README
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ */
++#include "sunxi-ss.h"
++
++/* This is a totaly arbitrary value */
++#define SS_TIMEOUT 100
++
++extern struct sunxi_ss_ctx *ss;
++
++int sunxi_hash_crainit(struct crypto_tfm *tfm)
++{
++ crypto_ahash_set_reqsize(__crypto_ahash_cast(tfm),
++ sizeof(struct sunxi_req_ctx));
++ return 0;
++}
++
++/* sunxi_hash_init: initialize request context */
++int sunxi_hash_init(struct ahash_request *areq)
++{
++ const char *hash_type;
++ struct sunxi_req_ctx *op = ahash_request_ctx(areq);
++
++ memset(op, 0, sizeof(struct sunxi_req_ctx));
++
++ hash_type = crypto_tfm_alg_name(areq->base.tfm);
++
++ if (strcmp(hash_type, "sha1") == 0)
++ op->mode = SS_OP_SHA1;
++ if (strcmp(hash_type, "md5") == 0)
++ op->mode = SS_OP_MD5;
++ if (op->mode == 0)
++ return -EINVAL;
++
++ return 0;
++}
++
++static u32 rx_cnt;
++
++inline void ss_writer(const u32 v)
++{
++ u32 spaces;
++
++ writel(v, ss->base + SS_RXFIFO);
++ rx_cnt--;
++ while (rx_cnt == 0) {
++ spaces = readl_relaxed(ss->base + SS_FCSR);
++ rx_cnt = SS_RXFIFO_SPACES(spaces);
++ }
++}
++
++inline void ss_writer_relaxed(const u32 v)
++{
++ u32 spaces;
++
++ writel_relaxed(v, ss->base + SS_RXFIFO);
++ rx_cnt--;
++ while (rx_cnt == 0) {
++ spaces = readl_relaxed(ss->base + SS_FCSR);
++ rx_cnt = SS_RXFIFO_SPACES(spaces);
++ }
++}
++
++/*
++ * sunxi_hash_update: update hash engine
++ *
++ * Could be used for both SHA1 and MD5
++ * Write data by step of 32bits and put then in the SS.
++ *
++ * Since we cannot leave partial data and hash state in the engine,
++ * we need to get the hash state at the end of this function.
++ * After some work, I have found that we can get the hash state every 64o
++ *
++ * So the first work is to get the number of bytes to write to SS modulo 64
++ * The extra bytes will go to two different destination:
++ * op->wait for full 32bits word
++ * op->wb (waiting bytes) for partial 32 bits word
++ * So we can have up to (64/4)-1 op->wait words and 0/1/2/3 bytes in wb
++ *
++ * So at the begin of update()
++ * if op->nwait * 4 + areq->nbytes < 64
++ * => all data writed to wait buffers and end=0
++ * if not write all nwait to the device and position end to complete to 64o
++ *
++ * example 1:
++ * update1 60o => nwait=15
++ * update2 60o => need one more word to have 64o
++ * end=4
++ * so write all data in op->wait and one word of SGs
++ * write remaining data in op->wait
++ * final state op->nwait=14
++ */
++int sunxi_hash_update(struct ahash_request *areq)
++{
++ u32 v, ivmode = 0;
++ unsigned int i = 0;
++ /*
++ * i is the total bytes read from SGs, to be compared to areq->nbytes
++ * i is important because we cannot rely on SG length since the sum of
++ * SG->length could be greater than areq->nbytes
++ */
++
++ struct sunxi_req_ctx *op = ahash_request_ctx(areq);
++ struct scatterlist *in_sg;
++ unsigned int in_i = 0; /* advancement in the current SG */
++ u64 end;
++ /*
++ * end is the position when we need to stop writing to the device,
++ * to be compared to i
++ */
++ int in_r;
++ void *src_addr;
++
++ dev_dbg(ss->dev, "%s %s bc=%llu len=%u mode=%x bw=%u ww=%u",
++ __func__, crypto_tfm_alg_name(areq->base.tfm),
++ op->byte_count, areq->nbytes, op->mode,
++ op->nbw, op->nwait);
++
++ if (areq->nbytes == 0)
++ return 0;
++
++ end = ((areq->nbytes + op->nwait * 4 + op->nbw) / 64) * 64
++ - op->nbw - op->nwait * 4;
++
++ if (end > areq->nbytes || areq->nbytes - end > 63) {
++ dev_err(ss->dev, "ERROR: Bound error %llu %u\n",
++ end, areq->nbytes);
++ return -EINVAL;
++ }
++
++ if (op->nwait > 0 && end > 0) {
++ /* a precedent update was done */
++ for (i = 0; i < op->nwait; i++) {
++ ss_writer(op->wait[i]);
++ op->byte_count += 4;
++ }
++ op->nwait = 0;
++ }
++
++ mutex_lock(&ss->lock);
++ /*
++ * if some data have been processed before,
++ * we need to restore the partial hash state
++ */
++ if (op->byte_count > 0) {
++ ivmode = SS_IV_ARBITRARY;
++ for (i = 0; i < 5; i++)
++ writel(op->hash[i], ss->base + SS_IV0 + i * 4);
++ }
++ /* Enable the device */
++ writel(op->mode | SS_ENABLED | ivmode, ss->base + SS_CTL);
++
++ rx_cnt = 0;
++ i = 0;
++
++ in_sg = areq->src;
++ src_addr = kmap(sg_page(in_sg)) + in_sg->offset;
++ if (src_addr == NULL) {
++ mutex_unlock(&ss->lock);
++ dev_err(ss->dev, "ERROR: Cannot kmap source buffer\n");
++ return -EFAULT;
++ }
++ do {
++ /*
++ * step 1, if some bytes remains from last SG,
++ * try to complete them to 4 and send that word
++ */
++ if (op->nbw > 0) {
++ while (op->nbw < 4 && i < areq->nbytes &&
++ in_i < in_sg->length) {
++ op->wb |= (*(u8 *)(src_addr + in_i))
++ << (8 * op->nbw);
++ dev_dbg(ss->dev, "%s Complete w=%d wb=%x\n",
++ __func__, op->nbw, op->wb);
++ i++;
++ in_i++;
++ op->nbw++;
++ }
++ if (op->nbw == 4) {
++ if (i <= end) {
++ ss_writer(op->wb);
++ op->byte_count += 4;
++ } else {
++ op->wait[op->nwait] = op->wb;
++ op->nwait++;
++ dev_dbg(ss->dev, "%s Keep %u bytes after %llu\n",
++ __func__, op->nwait, end);
++ }
++ op->nbw = 0;
++ op->wb = 0;
++ }
++ }
++ /* step 2, main loop, read data 4bytes at a time */
++ while (i < areq->nbytes && in_i < in_sg->length) {
++ /* how many bytes we can read, (we need 4) */
++ in_r = min(in_sg->length - in_i, areq->nbytes - i);
++ if (in_r < 4) {
++ /* Not enough data to write to the device */
++ op->wb = 0;
++ while (in_r > 0) {
++ op->wb |= (*(u8 *)(src_addr + in_i))
++ << (8 * op->nbw);
++ dev_dbg(ss->dev, "%s ending bw=%d wb=%x\n",
++ __func__, op->nbw, op->wb);
++ in_r--;
++ i++;
++ in_i++;
++ op->nbw++;
++ }
++ goto nextsg;
++ }
++ v = *(u32 *)(src_addr + in_i);
++ if (i < end) {
++ /* last write must be done without relaxed */
++ if (i + 4 >= end)
++ ss_writer(v);
++ else
++ ss_writer_relaxed(v);
++ i += 4;
++ op->byte_count += 4;
++ in_i += 4;
++ } else {
++ op->wait[op->nwait] = v;
++ i += 4;
++ in_i += 4;
++ op->nwait++;
++ dev_dbg(ss->dev, "%s Keep word ww=%u after %llu\n",
++ __func__, op->nwait, end);
++ if (op->nwait > 15) {
++ dev_err(ss->dev, "FATAL: Cannot enqueue more, bug?\n");
++ writel(0, ss->base + SS_CTL);
++ mutex_unlock(&ss->lock);
++ return -EIO;
++ }
++ }
++ }
++nextsg:
++ /* Nothing more to read in this SG */
++ if (in_i == in_sg->length) {
++ kunmap(sg_page(in_sg));
++ do {
++ in_sg = sg_next(in_sg);
++ } while (in_sg != NULL && in_sg->length == 0);
++ in_i = 0;
++ if (in_sg != NULL) {
++ src_addr = kmap(sg_page(in_sg)) + in_sg->offset;
++ if (src_addr == NULL) {
++ mutex_unlock(&ss->lock);
++ dev_err(ss->dev, "ERROR: Cannot kmap source buffer\n");
++ return -EFAULT;
++ }
++ }
++ }
++ } while (in_sg != NULL && i < areq->nbytes);
++
++ /* ask the device to finish the hashing */
++ writel(op->mode | SS_ENABLED | SS_DATA_END, ss->base + SS_CTL);
++ i = 0;
++ do {
++ v = readl(ss->base + SS_CTL);
++ i++;
++ } while (i < SS_TIMEOUT && (v & SS_DATA_END) > 0);
++ if (i >= SS_TIMEOUT) {
++ dev_err(ss->dev, "ERROR: %s hash end timeout after %d loop, CTL=%x\n",
++ __func__, i, v);
++ writel(0, ss->base + SS_CTL);
++ mutex_unlock(&ss->lock);
++ return -EIO;
++ }
++
++ /* get the partial hash */
++ if (op->mode == SS_OP_SHA1) {
++ for (i = 0; i < 5; i++)
++ op->hash[i] = readl(ss->base + SS_MD0 + i * 4);
++ } else {
++ for (i = 0; i < 4; i++)
++ op->hash[i] = readl(ss->base + SS_MD0 + i * 4);
++ }
++
++ writel(0, ss->base + SS_CTL);
++ mutex_unlock(&ss->lock);
++ return 0;
++}
++
++/*
++ * sunxi_hash_final: finalize hashing operation
++ *
++ * If we have some remaining bytes, we write them.
++ * Then ask the SS for finalizing the hashing operation
++ */
++int sunxi_hash_final(struct ahash_request *areq)
++{
++ u32 v, ivmode = 0;
++ unsigned int i;
++ int zeros;
++ unsigned int index, padlen;
++ __be64 bits;
++ struct sunxi_req_ctx *op = ahash_request_ctx(areq);
++
++ dev_dbg(ss->dev, "%s byte=%llu len=%u mode=%x bw=%u %x h=%x ww=%u",
++ __func__, op->byte_count, areq->nbytes, op->mode,
++ op->nbw, op->wb, op->hash[0], op->nwait);
++
++ mutex_lock(&ss->lock);
++ rx_cnt = 0;
++
++ /*
++ * if we have already writed something,
++ * restore the partial hash state
++ */
++ if (op->byte_count > 0) {
++ ivmode = SS_IV_ARBITRARY;
++ for (i = 0; i < 5; i++)
++ writel(op->hash[i], ss->base + SS_IV0 + i * 4);
++ }
++ writel(op->mode | SS_ENABLED | ivmode, ss->base + SS_CTL);
++
++ /* write the remaining words of the wait buffer */
++ if (op->nwait > 0) {
++ for (i = 0; i < op->nwait; i++) {
++ v = op->wait[i];
++ ss_writer(v);
++ op->byte_count += 4;
++ dev_dbg(ss->dev, "%s write %llu i=%u %x\n",
++ __func__, op->byte_count, i, v);
++ }
++ op->nwait = 0;
++ }
++
++ /* write the remaining bytes of the nbw buffer */
++ if (op->nbw > 0) {
++ op->wb |= ((1 << 7) << (op->nbw * 8));
++ ss_writer(op->wb);
++ } else {
++ ss_writer((1 << 7));
++ }
++
++ /*
++ * number of space to pad to obtain 64o minus 8(size) minus 4 (final 1)
++ * I take the operations from other md5/sha1 implementations
++ */
++
++ /* we have already send 4 more byte of which nbw data */
++ if (op->mode == SS_OP_MD5) {
++ index = (op->byte_count + 4) & 0x3f;
++ op->byte_count += op->nbw;
++ if (index > 56)
++ zeros = (120 - index) / 4;
++ else
++ zeros = (56 - index) / 4;
++ } else {
++ op->byte_count += op->nbw;
++ index = op->byte_count & 0x3f;
++ padlen = (index < 56) ? (56 - index) : ((64+56) - index);
++ zeros = (padlen - 1) / 4;
++ }
++ for (i = 0; i < zeros; i++)
++ ss_writer(0);
++
++ /* write the length of data */
++ if (op->mode == SS_OP_SHA1) {
++ bits = cpu_to_be64(op->byte_count << 3);
++ ss_writer(bits & 0xffffffff);
++ ss_writer((bits >> 32) & 0xffffffff);
++ } else {
++ ss_writer((op->byte_count << 3) & 0xffffffff);
++ ss_writer((op->byte_count >> 29) & 0xffffffff);
++ }
++
++ /* Tell the SS to stop the hashing */
++ writel(op->mode | SS_ENABLED | SS_DATA_END, ss->base + SS_CTL);
++
++ /*
++ * Wait for SS to finish the hash.
++ * The timeout could happend only in case of bad overcloking
++ * or driver bug.
++ */
++ i = 0;
++ do {
++ v = readl(ss->base + SS_CTL);
++ i++;
++ } while (i < SS_TIMEOUT && (v & SS_DATA_END) > 0);
++ if (i >= SS_TIMEOUT) {
++ dev_err(ss->dev, "ERROR: hash end timeout %d>%d ctl=%x len=%u\n",
++ i, SS_TIMEOUT, v, areq->nbytes);
++ writel(0, ss->base + SS_CTL);
++ mutex_unlock(&ss->lock);
++ return -EIO;
++ }
++
++ /* Get the hash from the device */
++ if (op->mode == SS_OP_SHA1) {
++ for (i = 0; i < 5; i++) {
++ v = cpu_to_be32(readl(ss->base + SS_MD0 + i * 4));
++ memcpy(areq->result + i * 4, &v, 4);
++ }
++ } else {
++ for (i = 0; i < 4; i++) {
++ v = readl(ss->base + SS_MD0 + i * 4);
++ memcpy(areq->result + i * 4, &v, 4);
++ }
++ }
++ writel(0, ss->base + SS_CTL);
++ mutex_unlock(&ss->lock);
++ return 0;
++}
++
++/* sunxi_hash_finup: finalize hashing operation after an update */
++int sunxi_hash_finup(struct ahash_request *areq)
++{
++ int err;
++
++ err = sunxi_hash_update(areq);
++ if (err != 0)
++ return err;
++
++ return sunxi_hash_final(areq);
++}
++
++/* combo of init/update/final functions */
++int sunxi_hash_digest(struct ahash_request *areq)
++{
++ int err;
++
++ err = sunxi_hash_init(areq);
++ if (err != 0)
++ return err;
++
++ err = sunxi_hash_update(areq);
++ if (err != 0)
++ return err;
++
++ return sunxi_hash_final(areq);
++}
+--- /dev/null
++++ b/drivers/crypto/sunxi-ss/sunxi-ss.h
+@@ -0,0 +1,193 @@
++/*
++ * sunxi-ss.c - hardware cryptographic accelerator for Allwinner A20 SoC
++ *
++ * Copyright (C) 2013-2014 Corentin LABBE <clabbe.montjoie@gmail.com>
++ *
++ * Support AES cipher with 128,192,256 bits keysize.
++ * Support MD5 and SHA1 hash algorithms.
++ * Support DES and 3DES
++ *
++ * You could find the datasheet in Documentation/arm/sunxi/README
++ *
++ * Licensed under the GPL-2.
++ */
++
++#include <linux/clk.h>
++#include <linux/crypto.h>
++#include <linux/io.h>
++#include <linux/module.h>
++#include <linux/of.h>
++#include <linux/platform_device.h>
++#include <crypto/scatterwalk.h>
++#include <linux/scatterlist.h>
++#include <linux/interrupt.h>
++#include <linux/delay.h>
++#include <crypto/md5.h>
++#include <crypto/sha.h>
++#include <crypto/hash.h>
++#include <crypto/internal/hash.h>
++#include <crypto/aes.h>
++#include <crypto/des.h>
++#include <crypto/internal/rng.h>
++
++#define SS_CTL 0x00
++#define SS_KEY0 0x04
++#define SS_KEY1 0x08
++#define SS_KEY2 0x0C
++#define SS_KEY3 0x10
++#define SS_KEY4 0x14
++#define SS_KEY5 0x18
++#define SS_KEY6 0x1C
++#define SS_KEY7 0x20
++
++#define SS_IV0 0x24
++#define SS_IV1 0x28
++#define SS_IV2 0x2C
++#define SS_IV3 0x30
++
++#define SS_CNT0 0x34
++#define SS_CNT1 0x38
++#define SS_CNT2 0x3C
++#define SS_CNT3 0x40
++
++#define SS_FCSR 0x44
++#define SS_ICSR 0x48
++
++#define SS_MD0 0x4C
++#define SS_MD1 0x50
++#define SS_MD2 0x54
++#define SS_MD3 0x58
++#define SS_MD4 0x5C
++
++#define SS_RXFIFO 0x200
++#define SS_TXFIFO 0x204
++
++/* SS_CTL configuration values */
++
++/* PRNG generator mode - bit 15 */
++#define SS_PRNG_ONESHOT (0 << 15)
++#define SS_PRNG_CONTINUE (1 << 15)
++
++/* IV mode for hash */
++#define SS_IV_ARBITRARY (1 << 14)
++
++/* SS operation mode - bits 12-13 */
++#define SS_ECB (0 << 12)
++#define SS_CBC (1 << 12)
++#define SS_CNT (2 << 12)
++
++/* Counter width for CNT mode - bits 10-11 */
++#define SS_CNT_16BITS (0 << 10)
++#define SS_CNT_32BITS (1 << 10)
++#define SS_CNT_64BITS (2 << 10)
++
++/* Key size for AES - bits 8-9 */
++#define SS_AES_128BITS (0 << 8)
++#define SS_AES_192BITS (1 << 8)
++#define SS_AES_256BITS (2 << 8)
++
++/* Operation direction - bit 7 */
++#define SS_ENCRYPTION (0 << 7)
++#define SS_DECRYPTION (1 << 7)
++
++/* SS Method - bits 4-6 */
++#define SS_OP_AES (0 << 4)
++#define SS_OP_DES (1 << 4)
++#define SS_OP_3DES (2 << 4)
++#define SS_OP_SHA1 (3 << 4)
++#define SS_OP_MD5 (4 << 4)
++#define SS_OP_PRNG (5 << 4)
++
++/* Data end bit - bit 2 */
++#define SS_DATA_END (1 << 2)
++
++/* PRNG start bit - bit 1 */
++#define SS_PRNG_START (1 << 1)
++
++/* SS Enable bit - bit 0 */
++#define SS_DISABLED (0 << 0)
++#define SS_ENABLED (1 << 0)
++
++/* SS_FCSR configuration values */
++/* RX FIFO status - bit 30 */
++#define SS_RXFIFO_FREE (1 << 30)
++
++/* RX FIFO empty spaces - bits 24-29 */
++#define SS_RXFIFO_SPACES(val) (((val) >> 24) & 0x3f)
++
++/* TX FIFO status - bit 22 */
++#define SS_TXFIFO_AVAILABLE (1 << 22)
++
++/* TX FIFO available spaces - bits 16-21 */
++#define SS_TXFIFO_SPACES(val) (((val) >> 16) & 0x3f)
++
++#define SS_RXFIFO_EMP_INT_PENDING (1 << 10)
++#define SS_TXFIFO_AVA_INT_PENDING (1 << 8)
++#define SS_RXFIFO_EMP_INT_ENABLE (1 << 2)
++#define SS_TXFIFO_AVA_INT_ENABLE (1 << 0)
++
++/* SS_ICSR configuration values */
++#define SS_ICS_DRQ_ENABLE (1 << 4)
++
++struct sunxi_ss_ctx {
++ void __iomem *base;
++ int irq;
++ struct clk *busclk;
++ struct clk *ssclk;
++ struct device *dev;
++ struct resource *res;
++ void *buf_in; /* pointer to data to be uploaded to the device */
++ size_t buf_in_size; /* size of buf_in */
++ void *buf_out;
++ size_t buf_out_size;
++ struct mutex lock; /* control the use of the device */
++ struct mutex bufout_lock; /* control the use of buf_out*/
++ struct mutex bufin_lock; /* control the sue of buf_in*/
++};
++
++struct sunxi_tfm_ctx {
++ u32 key[AES_MAX_KEY_SIZE / 4];/* divided by sizeof(u32) */
++ u32 keylen;
++ u32 keymode;
++};
++
++struct sunxi_req_ctx {
++ u32 mode;
++ u64 byte_count; /* number of bytes "uploaded" to the device */
++ u32 wb; /* a partial word waiting to be completed and
++ uploaded to the device */
++ /* number of bytes to be uploaded in the wb word */
++ unsigned int nbw;
++ u32 hash[5];
++ u32 wait[64];
++ unsigned int nwait;
++};
++
++#define SS_SEED_LEN (192/8)
++#define SS_DATA_LEN (160/8)
++
++struct prng_context {
++ u32 seed[SS_SEED_LEN/4];
++ unsigned int slen;
++};
++
++int sunxi_hash_crainit(struct crypto_tfm *tfm);
++int sunxi_hash_init(struct ahash_request *areq);
++int sunxi_hash_update(struct ahash_request *areq);
++int sunxi_hash_final(struct ahash_request *areq);
++int sunxi_hash_finup(struct ahash_request *areq);
++int sunxi_hash_digest(struct ahash_request *areq);
++int sunxi_hash_export(struct ahash_request *areq, void *out);
++int sunxi_hash_import(struct ahash_request *areq, const void *in);
++
++int sunxi_ss_aes_poll(struct ablkcipher_request *areq, u32 mode);
++int sunxi_ss_des_poll(struct ablkcipher_request *areq, u32 mode);
++int sunxi_ss_cipher_init(struct crypto_tfm *tfm);
++int sunxi_ss_cipher_encrypt(struct ablkcipher_request *areq);
++int sunxi_ss_cipher_decrypt(struct ablkcipher_request *areq);
++int sunxi_ss_aes_setkey(struct crypto_ablkcipher *tfm, const u8 *key,
++ unsigned int keylen);
++int sunxi_ss_des_setkey(struct crypto_ablkcipher *tfm, const u8 *key,
++ unsigned int keylen);
++int sunxi_ss_des3_setkey(struct crypto_ablkcipher *tfm, const u8 *key,
++ unsigned int keylen);
generated by cgit v1.2.3 (git 2.25.1) at 2024-05-09 11:41:17 +0000