1 files changed, 117 insertions, 0 deletions
diff --git a/target/linux/ramips/dts/WL-351.dts b/target/linux/ramips/dts/WL-351.dts
new file mode 100644
index 0000000..3fcb222
--- /dev/null
+++ b/target/linux/ramips/dts/WL-351.dts
@@ -0,0 +1,117 @@
+/dts-v1/;
+
+/include/ "rt3050.dtsi"
+
+/ {
+	compatible = "WL-351", "ralink,rt3052-soc";
+	model = "Sitecom WL-351 v1 002";
+
+	pinctrl {
+		state_default: pinctrl0 {
+			gpio {
+				ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
+				ralink,function = "gpio";
+			};
+		};
+	};
+
+	cfi@1f000000 {
+		compatible = "cfi-flash";
+		reg = <0x1f000000 0x800000>;
+		bank-width = <2>;
+		device-width = <2>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		partition@0 {
+			label = "u-boot";
+			reg = <0x0 0x30000>;
+			read-only;
+		};
+
+		partition@30000 {
+			label = "u-boot-env";
+			reg = <0x30000 0x10000>;
+			read-only;
+		};
+
+		factory: partition@40000 {
+			label = "factory";
+			reg = <0x40000 0x10000>;
+			read-only;
+		};
+
+		partition@50000 {
+			label = "firmware";
+			reg = <0x50000 0x3b0000>;
+		};
+	};
+
+	ethernet@10100000 {
+		mtd-mac-address = <&factory 0x4>;
+	};
+
+	esw@10110000 {
+		ralink,portmap = <0x3f>;
+		ralink,fct2 = <0x0002500c>;
+		/*
+		 * ext phy base addr 31, rx/tx clock skew 0,
+		 * turbo mii off, rgmi 3.3v off, port 5 polling off
+		 * port5: enabled, gige, full-duplex, rx/tx-flow-control
+		 * port6: enabled, gige, full-duplex, rx/tx-flow-control
+		*/
+		ralink,fpa2 = <0x1f003fff>;
+	};
+
+	wmac@10180000 {
+		ralink,mtd-eeprom = <&factory 0>;
+	};
+
+	otg@101c0000 {
+		status = "okay";
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		power {
+			label = "wl-351:amber:power";
+			gpios = <&gpio0 8 1>;
+		};
+
+		unpopulated {
+			label = "wl-351:amber:unpopulated";
+			gpios = <&gpio0 12 1>;
+		};
+
+		unpopulated2 {
+			label = "wl-351:blue:unpopulated";
+			gpios = <&gpio0 13 1>;
+		};
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		poll-interval = <20>;
+
+		reset {
+			label = "reset";
+			gpios = <&gpio0 10 1>;
+			linux,code = <0x198>;
+		};
+
+		wps {
+			label = "wps";
+			gpios = <&gpio0 0 1>;
+			linux,code = <0x211>;
+		};
+	};
+
+	rtl8366rb {
+		compatible = "rtl8366rb";
+		gpio-sda = <&gpio0 1 0>;
+		gpio-sck = <&gpio0 2 0>;
+	};
+};