diff options
Diffstat (limited to 'target/linux/lantiq/base-files/etc/uci-defaults/02_network')
| -rw-r--r-- | target/linux/lantiq/base-files/etc/uci-defaults/02_network | 211 |
1 files changed, 211 insertions, 0 deletions
diff --git a/target/linux/lantiq/base-files/etc/uci-defaults/02_network b/target/linux/lantiq/base-files/etc/uci-defaults/02_network new file mode 100644 index 0000000..b22060c --- /dev/null +++ b/target/linux/lantiq/base-files/etc/uci-defaults/02_network @@ -0,0 +1,211 @@ +#!/bin/sh +# +# Copyright (C) 2011-2012 OpenWrt.org +# + +[ -e /etc/config/network ] && exit 0 + +set_atm_wan() { + local vpi=$1 + local vci=$2 + local encaps=$3 + local payload=$4 + uci batch <<EOF +set network.atm='atm-bridge' +set network.atm.vpi='$vpi' +set network.atm.vci='$vci' +set network.atm.encaps='$encaps' +set network.atm.payload='$payload' +set network.wan='interface' +set network.wan.ifname='nas0' +set network.wan.proto='pppoe' +set network.wan.username='foo' +set network.wan.password='bar' +set network.wan.ipv6='1' +set network.wan6='interface' +set network.wan6.ifname='@wan' +set network.wan6.proto='dhcpv6' +EOF +} + +set_adsl_modem() { + local annex=$1 + local firmware=$2 + uci batch <<EOF +set network.dsl='adsl' +set network.dsl.annex='$annex' +set network.dsl.firmware='$firmware' +EOF +} + +set_vdsl_modem() { + local annex=$1 + local firmware=$2 + local tone=$3 + local xfer_mode=$4 + uci batch <<EOF +set network.dsl='vdsl' +set network.dsl.annex='$annex' +set network.dsl.firmware='$firmware' +set network.dsl.tone='$tone' +set network.dsl.xfer_mode='$xfer_mode' +EOF +} + +. /lib/functions/uci-defaults.sh +. /lib/functions/lantiq.sh + +touch /etc/config/network + +ucidef_set_interface_loopback +ucidef_set_interface_lan 'eth0' + +vpi=1 +vci=32 +annex="a" +encaps="llc" +payload="bridged" +lan_mac="" +wan_mac="" + +board=$(lantiq_board_name) + +case "$board" in +# adm6996 +ARV4510PW) + lan_mac=$(mtd_get_mac_ascii uboot_env ethaddr) + wan_mac=$(macaddr_add "$lan_mac" 1) + ucidef_set_interface_lan "eth0.1" + ucidef_add_switch "switch0" "1" "1" + ucidef_add_switch_vlan "switch0" "1" "3 2 1 0 5t" + ;; + +ARV4520PW) + ucidef_set_interface_lan "eth0.1" + ucidef_add_switch "switch0" "1" "1" + ucidef_add_switch_vlan "switch0" "1" "3 2 1 0 5t" + ;; + +ACMP252|GIGASX76X) + ucidef_set_interface_lan "eth0.1" + ucidef_add_switch "switch0" "1" "1" + ucidef_add_switch_vlan "switch0" "1" "4 3 2 1 5t" + ;; + +# ar8316 +ARV4519PW|ARV7510PW22|ARV7518PW|ARV752DPW22|ARV8539PW22) + ucidef_set_interface_lan "eth0.1" + ucidef_add_switch "switch0" "1" "1" + ucidef_add_switch_vlan "switch0" "1" "0t 2 3 4 5" + ;; + +# rtl8306g +ARV7519PW) + lan_mac=$(mtd_get_mac_binary board_config 22) + wan_mac=$(macaddr_add "$lan_mac" 1) + ucidef_set_interface_lan "eth0.1" + ucidef_add_switch "switch0" "1" "1" + ucidef_add_switch_vlan "switch0" "1" "0 1 2 3 4t" + ;; + +WBMR) + ucidef_set_interface_lan "eth0.1" + ucidef_add_switch "switch0" "1" "1" + ucidef_add_switch_vlan "switch0" "1" "0t 2 3 4 5" + ;; + +VG3503J) + ucidef_set_interface_lan 'eth0' + uci set network.lan.type='none' + ;; + +DGN3500*) + ucidef_set_interface_lan "eth0.1" + ucidef_add_switch "switch0" "1" "1" + ucidef_add_switch_vlan "switch0" "1" "3 2 1 0 5t" + ;; + +GR7000) + ucidef_set_interface_wan "eth0" + uci set network.lan.ifname='' + ;; + +H201L) + ucidef_set_interface_lan "eth0.1" + ucidef_add_switch "switch0" "1" "1" + ucidef_add_switch_vlan "switch0" "1" "0 1 2 3 4t" + ;; + +#rtl8306g +P2601HNFX) + ucidef_set_interface_lan "eth0.1" + ucidef_add_switch "switch0" "1" "1" + ucidef_add_switch_vlan "switch0" "1" "0 1 2 3 5t" + ;; + +P2812HNUF*) + lan_mac=$(mtd_get_mac_ascii uboot-env ethaddr) + wan_mac=$(macaddr_add "$lan_mac" 1) + ucidef_set_interface_lan 'eth0.1' + ucidef_add_switch "switch0" "1" "1" + ucidef_add_switch_vlan "switch0" "1" "0 1 2 4 5 6t" + ;; + +TDW8970|TDW8980) + lan_mac=$(mtd_get_mac_binary boardconfig 61696) + wan_mac=$(macaddr_add "$lan_mac" 1) + ucidef_set_interface_lan 'eth0.1' + ucidef_add_switch "switch0" "1" "1" + ucidef_add_switch_vlan "switch0" "1" "0 2 4 5 6t" + ;; + +ARV7519RW22) + lan_mac=$(mtd_get_mac_binary boardconfig 22) + wan_mac=$(macaddr_add "$lan_mac" 1) + ucidef_set_interface_lan "eth0.1" + ucidef_add_switch "switch0" "1" "1" + ucidef_add_switch_vlan "switch0" "1" "0 2 3 4 5 6t" + ;; + +BTHOMEHUBV2B|BTHOMEHUBV3A) + lan_mac=$(mtd_get_mac_ascii uboot_env ethaddr) + wan_mac=$(macaddr_add "$lan_mac" 1) + ;; + +BTHOMEHUBV5A) + lan_mac=$(mtd_get_mac_binary caldata 4364) + wan_mac=$(macaddr_add "$lan_mac" 1) + ucidef_set_interface_lan 'eth0.1' + ucidef_add_switch "switch0" "1" "1" + ucidef_add_switch_vlan "switch0" "1" "0 1 2 4 6t" + ;; + +VGV7519) + lan_mac=$(mtd_get_mac_binary board_config 22) + wan_mac=$(macaddr_add "$lan_mac" 1) + ;; + +VGV7510KW22) + lan_mac=$(mtd_get_mac_binary board_config 22) + wan_mac=$(macaddr_add "$lan_mac" 1) + ucidef_set_interface_lan 'eth0.1' + ucidef_add_switch "switch0" "1" "1" + ucidef_add_switch_vlan "switch0" "1" "2 3 4 5 6t" + ;; + +esac + +[ -z "$(ls /lib/modules/`uname -r`/ltq_atm*)" ] || set_atm_wan "$vpi" "$vci" "$encaps" "$payload" + +if [ -n "$(grep "system type.*: VR9" /proc/cpuinfo)" ]; then + set_vdsl_modem "$annex" "/lib/firmware/vdsl.bin" "av" "ptm" +else + set_adsl_modem "$annex" "/lib/firmware/adsl.bin" +fi + +[ -n "$lan_mac" ] && ucidef_set_interface_macaddr lan $lan_mac +[ -n "$wan_mac" ] && ucidef_set_interface_macaddr wan $wan_mac + +uci commit network + +exit 0 |