aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/brcm2708/patches-4.1/0135-thermal-bcm2835-Use-firmware-API.patch
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/brcm2708/patches-4.1/0135-thermal-bcm2835-Use-firmware-API.patch')
-rw-r--r--target/linux/brcm2708/patches-4.1/0135-thermal-bcm2835-Use-firmware-API.patch281
1 files changed, 281 insertions, 0 deletions
diff --git a/target/linux/brcm2708/patches-4.1/0135-thermal-bcm2835-Use-firmware-API.patch b/target/linux/brcm2708/patches-4.1/0135-thermal-bcm2835-Use-firmware-API.patch
new file mode 100644
index 0000000..291ea48
--- /dev/null
+++ b/target/linux/brcm2708/patches-4.1/0135-thermal-bcm2835-Use-firmware-API.patch
@@ -0,0 +1,281 @@
+From fb11a46fed3871b67fcf71631910afba21e6fc22 Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Noralf=20Tr=C3=B8nnes?= <noralf@tronnes.org>
+Date: Mon, 20 Jul 2015 12:17:10 +0200
+Subject: [PATCH 135/203] thermal: bcm2835: Use firmware API
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+Use the new firmware API instead of the legacy mailbox API.
+Remove retry loop on failure to read temperature.
+Clean up code.
+
+Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
+---
+ arch/arm/boot/dts/bcm2708_common.dtsi | 1 +
+ drivers/thermal/bcm2835-thermal.c | 197 +++++++++++++---------------------
+ 2 files changed, 75 insertions(+), 123 deletions(-)
+
+--- a/arch/arm/boot/dts/bcm2708_common.dtsi
++++ b/arch/arm/boot/dts/bcm2708_common.dtsi
+@@ -230,6 +230,7 @@
+
+ thermal: thermal {
+ compatible = "brcm,bcm2835-thermal";
++ firmware = <&firmware>;
+ };
+ };
+
+--- a/drivers/thermal/bcm2835-thermal.c
++++ b/drivers/thermal/bcm2835-thermal.c
+@@ -12,161 +12,113 @@
+ * consent.
+ *****************************************************************************/
+
+-#include <linux/kernel.h>
+ #include <linux/module.h>
+-#include <linux/init.h>
+-#include <linux/platform_data/mailbox-bcm2708.h>
+ #include <linux/platform_device.h>
+-#include <linux/slab.h>
+-#include <linux/sysfs.h>
+ #include <linux/thermal.h>
++#include <soc/bcm2835/raspberrypi-firmware.h>
+
+-
+-/* --- DEFINITIONS --- */
+-#define MODULE_NAME "bcm2835_thermal"
+-
+-/*#define THERMAL_DEBUG_ENABLE*/
+-
+-#ifdef THERMAL_DEBUG_ENABLE
+-#define print_debug(fmt,...) printk(KERN_INFO "%s:%s:%d: "fmt"\n", MODULE_NAME, __func__, __LINE__, ##__VA_ARGS__)
+-#else
+-#define print_debug(fmt,...)
+-#endif
+-#define print_err(fmt,...) printk(KERN_ERR "%s:%s:%d: "fmt"\n", MODULE_NAME, __func__,__LINE__, ##__VA_ARGS__)
+-
+-#define VC_TAG_GET_TEMP 0x00030006
+-#define VC_TAG_GET_MAX_TEMP 0x0003000A
+-
+-typedef enum {
+- TEMP,
+- MAX_TEMP,
+-} temp_type;
+-
+-/* --- STRUCTS --- */
+-/* tag part of the message */
+-struct vc_msg_tag {
+- uint32_t tag_id; /* the tag ID for the temperature */
+- uint32_t buffer_size; /* size of the buffer (should be 8) */
+- uint32_t request_code; /* identifies message as a request (should be 0) */
+- uint32_t id; /* extra ID field (should be 0) */
+- uint32_t val; /* returned value of the temperature */
+-};
+-
+-/* message structure to be sent to videocore */
+-struct vc_msg {
+- uint32_t msg_size; /* simply, sizeof(struct vc_msg) */
+- uint32_t request_code; /* holds various information like the success and number of bytes returned (refer to mailboxes wiki) */
+- struct vc_msg_tag tag; /* the tag structure above to make */
+- uint32_t end_tag; /* an end identifier, should be set to NULL */
+-};
+-
+-struct bcm2835_thermal_data {
+- struct thermal_zone_device *thermal_dev;
+- struct vc_msg msg;
+-};
+-
+-/* --- GLOBALS --- */
+-static struct bcm2835_thermal_data bcm2835_data;
+-
+-/* Thermal Device Operations */
+-static struct thermal_zone_device_ops ops;
+-
+-/* --- FUNCTIONS --- */
+-
+-static int bcm2835_get_temp_or_max(struct thermal_zone_device *thermal_dev, unsigned long *temp, unsigned tag_id)
++static int bcm2835_thermal_get_property(struct thermal_zone_device *tz,
++ unsigned long *temp, u32 tag)
+ {
+- int result = -1, retry = 3;
+- print_debug("IN");
++ struct rpi_firmware *fw = tz->devdata;
++ struct {
++ u32 id;
++ u32 val;
++ } packet;
++ int ret;
+
+ *temp = 0;
+- while (result != 0 && retry-- > 0) {
+- /* wipe all previous message data */
+- memset(&bcm2835_data.msg, 0, sizeof bcm2835_data.msg);
+-
+- /* prepare message */
+- bcm2835_data.msg.msg_size = sizeof bcm2835_data.msg;
+- bcm2835_data.msg.tag.buffer_size = 8;
+- bcm2835_data.msg.tag.tag_id = tag_id;
+-
+- /* send the message */
+- result = bcm_mailbox_property(&bcm2835_data.msg, sizeof bcm2835_data.msg);
+- print_debug("Got %stemperature as %u (%d,%x)\n", tag_id==VC_TAG_GET_MAX_TEMP ? "max ":"", (uint)bcm2835_data.msg.tag.val, result, bcm2835_data.msg.request_code);
+- if (!(bcm2835_data.msg.request_code & 0x80000000))
+- result = -1;
++ packet.id = 0;
++ ret = rpi_firmware_property(fw, tag, &packet, sizeof(packet));
++ if (ret) {
++ dev_err(&tz->device, "Failed to get temperature\n");
++ return ret;
+ }
+
+- /* check if it was all ok and return the rate in milli degrees C */
+- if (result == 0)
+- *temp = (uint)bcm2835_data.msg.tag.val;
+- else
+- print_err("Failed to get temperature! (%x:%d)\n", tag_id, result);
+- print_debug("OUT");
+- return result;
++ *temp = packet.val;
++ dev_dbg(&tz->device, "%stemp=%lu\n",
++ tag == RPI_FIRMWARE_GET_MAX_TEMPERATURE ? "max" : "", *temp);
++
++ return 0;
+ }
+
+-static int bcm2835_get_temp(struct thermal_zone_device *thermal_dev, unsigned long *temp)
++static int bcm2835_thermal_get_temp(struct thermal_zone_device *tz,
++ unsigned long *temp)
+ {
+- return bcm2835_get_temp_or_max(thermal_dev, temp, VC_TAG_GET_TEMP);
++ return bcm2835_thermal_get_property(tz, temp,
++ RPI_FIRMWARE_GET_TEMPERATURE);
+ }
+
+-static int bcm2835_get_max_temp(struct thermal_zone_device *thermal_dev, int trip_num, unsigned long *temp)
++static int bcm2835_thermal_get_max_temp(struct thermal_zone_device *tz,
++ int trip, unsigned long *temp)
+ {
+- return bcm2835_get_temp_or_max(thermal_dev, temp, VC_TAG_GET_MAX_TEMP);
++ /*
++ * The maximum safe temperature of the SoC.
++ * Overclock may be disabled above this temperature.
++ */
++ return bcm2835_thermal_get_property(tz, temp,
++ RPI_FIRMWARE_GET_MAX_TEMPERATURE);
+ }
+
+-static int bcm2835_get_trip_type(struct thermal_zone_device * thermal_dev, int trip_num, enum thermal_trip_type *trip_type)
++static int bcm2835_thermal_get_trip_type(struct thermal_zone_device *tz,
++ int trip, enum thermal_trip_type *type)
+ {
+- *trip_type = THERMAL_TRIP_HOT;
++ *type = THERMAL_TRIP_HOT;
++
+ return 0;
+ }
+
+-
+-static int bcm2835_get_mode(struct thermal_zone_device *thermal_dev, enum thermal_device_mode *dev_mode)
++static int bcm2835_thermal_get_mode(struct thermal_zone_device *tz,
++ enum thermal_device_mode *mode)
+ {
+- *dev_mode = THERMAL_DEVICE_ENABLED;
++ *mode = THERMAL_DEVICE_ENABLED;
++
+ return 0;
+ }
+
++static struct thermal_zone_device_ops ops = {
++ .get_temp = bcm2835_thermal_get_temp,
++ .get_trip_temp = bcm2835_thermal_get_max_temp,
++ .get_trip_type = bcm2835_thermal_get_trip_type,
++ .get_mode = bcm2835_thermal_get_mode,
++};
+
+ static int bcm2835_thermal_probe(struct platform_device *pdev)
+ {
+- print_debug("IN");
+- print_debug("THERMAL Driver has been probed!");
+-
+- /* check that the device isn't null!*/
+- if(pdev == NULL)
+- {
+- print_debug("Platform device is empty!");
+- return -ENODEV;
++ struct device_node *fw_np;
++ struct rpi_firmware *fw;
++ struct thermal_zone_device *tz;
++
++ fw_np = of_parse_phandle(pdev->dev.of_node, "firmware", 0);
++/* Remove comment when booting without Device Tree is no longer supported
++ if (!fw_np) {
++ dev_err(&pdev->dev, "Missing firmware node\n");
++ return -ENOENT;
+ }
+-
+- if(!(bcm2835_data.thermal_dev = thermal_zone_device_register("bcm2835_thermal", 1, 0, NULL, &ops, NULL, 0, 0)))
+- {
+- print_debug("Unable to register the thermal device!");
+- return -EFAULT;
++*/
++ fw = rpi_firmware_get(fw_np);
++ if (!fw)
++ return -EPROBE_DEFER;
++
++ tz = thermal_zone_device_register("bcm2835_thermal", 1, 0, fw, &ops,
++ NULL, 0, 0);
++ if (IS_ERR(tz)) {
++ dev_err(&pdev->dev, "Failed to register the thermal device\n");
++ return PTR_ERR(tz);
+ }
++
++ platform_set_drvdata(pdev, tz);
++
+ return 0;
+ }
+
+-
+ static int bcm2835_thermal_remove(struct platform_device *pdev)
+ {
+- print_debug("IN");
+-
+- thermal_zone_device_unregister(bcm2835_data.thermal_dev);
+-
+- print_debug("OUT");
++ thermal_zone_device_unregister(platform_get_drvdata(pdev));
+
+ return 0;
+ }
+
+-static struct thermal_zone_device_ops ops = {
+- .get_temp = bcm2835_get_temp,
+- .get_trip_temp = bcm2835_get_max_temp,
+- .get_trip_type = bcm2835_get_trip_type,
+- .get_mode = bcm2835_get_mode,
+-};
+-
+ static const struct of_device_id bcm2835_thermal_of_match_table[] = {
+ { .compatible = "brcm,bcm2835-thermal", },
+ {},
+@@ -177,14 +129,13 @@ static struct platform_driver bcm2835_th
+ .probe = bcm2835_thermal_probe,
+ .remove = bcm2835_thermal_remove,
+ .driver = {
+- .name = "bcm2835_thermal",
+- .owner = THIS_MODULE,
+- .of_match_table = bcm2835_thermal_of_match_table,
+- },
++ .name = "bcm2835_thermal",
++ .of_match_table = bcm2835_thermal_of_match_table,
++ },
+ };
++module_platform_driver(bcm2835_thermal_driver);
+
+-MODULE_LICENSE("GPL");
+ MODULE_AUTHOR("Dorian Peake");
++MODULE_AUTHOR("Noralf Trønnes");
+ MODULE_DESCRIPTION("Thermal driver for bcm2835 chip");
+-
+-module_platform_driver(bcm2835_thermal_driver);
++MODULE_LICENSE("GPL");
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-19 16:35:21 +0000