diff options
Diffstat (limited to 'target/linux/ar71xx/files/arch/mips/ath79/mach-dir-825-c1.c')
| -rw-r--r-- | target/linux/ar71xx/files/arch/mips/ath79/mach-dir-825-c1.c | 241 |
1 files changed, 241 insertions, 0 deletions
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-dir-825-c1.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-dir-825-c1.c new file mode 100644 index 0000000..9c4c1a8 --- /dev/null +++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-dir-825-c1.c @@ -0,0 +1,241 @@ +/* + * D-Link DIR-825 rev. C1 board support + * + * Copyright (C) 2013 Alexander Stadler + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/pci.h> +#include <linux/phy.h> +#include <linux/gpio.h> +#include <linux/platform_device.h> +#include <linux/ath9k_platform.h> +#include <linux/ar8216_platform.h> + +#include <asm/mach-ath79/ar71xx_regs.h> + +#include "common.h" +#include "dev-ap9x-pci.h" +#include "dev-eth.h" +#include "dev-gpio-buttons.h" +#include "dev-leds-gpio.h" +#include "dev-m25p80.h" +#include "dev-spi.h" +#include "dev-usb.h" +#include "dev-wmac.h" +#include "machtypes.h" + +#define DIR825C1_GPIO_LED_BLUE_USB 11 +#define DIR825C1_GPIO_LED_AMBER_POWER 14 +#define DIR825C1_GPIO_LED_BLUE_POWER 22 +#define DIR825C1_GPIO_LED_BLUE_WPS 15 +#define DIR825C1_GPIO_LED_AMBER_PLANET 19 +#define DIR825C1_GPIO_LED_BLUE_PLANET 18 +#define DIR825C1_GPIO_LED_WLAN_2G 13 + +#define DIR825C1_GPIO_WAN_LED_ENABLE 20 + +#define DIR825C1_GPIO_BTN_RESET 17 +#define DIR825C1_GPIO_BTN_WPS 16 + +#define DIR825C1_KEYS_POLL_INTERVAL 20 /* msecs */ +#define DIR825C1_KEYS_DEBOUNCE_INTERVAL (3 * DIR825C1_KEYS_POLL_INTERVAL) + +#define DIR825C1_MAC0_OFFSET 0x4 +#define DIR825C1_MAC1_OFFSET 0x18 +#define DIR825C1_WMAC_CALDATA_OFFSET 0x1000 +#define DIR825C1_PCIE_CALDATA_OFFSET 0x5000 + +static struct gpio_led dir825c1_leds_gpio[] __initdata = { + { + .name = "d-link:blue:usb", + .gpio = DIR825C1_GPIO_LED_BLUE_USB, + .active_low = 1, + }, + { + .name = "d-link:amber:power", + .gpio = DIR825C1_GPIO_LED_AMBER_POWER, + .active_low = 1, + }, + { + .name = "d-link:blue:power", + .gpio = DIR825C1_GPIO_LED_BLUE_POWER, + .active_low = 1, + }, + { + .name = "d-link:blue:wps", + .gpio = DIR825C1_GPIO_LED_BLUE_WPS, + .active_low = 1, + }, + { + .name = "d-link:amber:planet", + .gpio = DIR825C1_GPIO_LED_AMBER_PLANET, + .active_low = 1, + }, + { + .name = "d-link:blue:wlan2g", + .gpio = DIR825C1_GPIO_LED_WLAN_2G, + .active_low = 1, + }, +}; + +static struct gpio_led dir835a1_leds_gpio[] __initdata = { + { + .name = "d-link:amber:power", + .gpio = DIR825C1_GPIO_LED_AMBER_POWER, + .active_low = 1, + }, + { + .name = "d-link:green:power", + .gpio = DIR825C1_GPIO_LED_BLUE_POWER, + .active_low = 1, + }, + { + .name = "d-link:blue:wps", + .gpio = DIR825C1_GPIO_LED_BLUE_WPS, + .active_low = 1, + }, + { + .name = "d-link:amber:planet", + .gpio = DIR825C1_GPIO_LED_AMBER_PLANET, + .active_low = 1, + }, + { + .name = "d-link:green:planet", + .gpio = DIR825C1_GPIO_LED_BLUE_PLANET, + .active_low = 1, + }, +}; + +static struct gpio_keys_button dir825c1_gpio_keys[] __initdata = { + { + .desc = "Soft reset", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = DIR825C1_KEYS_DEBOUNCE_INTERVAL, + .gpio = DIR825C1_GPIO_BTN_RESET, + .active_low = 1, + }, + { + .desc = "WPS button", + .type = EV_KEY, + .code = KEY_WPS_BUTTON, + .debounce_interval = DIR825C1_KEYS_DEBOUNCE_INTERVAL, + .gpio = DIR825C1_GPIO_BTN_WPS, + .active_low = 1, + }, +}; + +static struct ar8327_pad_cfg dir825c1_ar8327_pad0_cfg = { + .mode = AR8327_PAD_MAC_RGMII, + .txclk_delay_en = true, + .rxclk_delay_en = true, + .txclk_delay_sel = AR8327_CLK_DELAY_SEL1, + .rxclk_delay_sel = AR8327_CLK_DELAY_SEL2, +}; + +static struct ar8327_led_cfg dir825c1_ar8327_led_cfg = { + .led_ctrl0 = 0x00000000, + .led_ctrl1 = 0xc737c737, + .led_ctrl2 = 0x00000000, + .led_ctrl3 = 0x00c30c00, + .open_drain = true, +}; + +static struct ar8327_platform_data dir825c1_ar8327_data = { + .pad0_cfg = &dir825c1_ar8327_pad0_cfg, + .port0_cfg = { + .force_link = 1, + .speed = AR8327_PORT_SPEED_1000, + .duplex = 1, + .txpause = 1, + .rxpause = 1, + }, + .led_cfg = &dir825c1_ar8327_led_cfg, +}; + +static struct mdio_board_info dir825c1_mdio0_info[] = { + { + .bus_id = "ag71xx-mdio.0", + .phy_addr = 0, + .platform_data = &dir825c1_ar8327_data, + }, +}; + +static void __init dir825c1_generic_setup(void) +{ + u8 *mac = (u8 *) KSEG1ADDR(0x1ffe0000); + u8 *art = (u8 *) KSEG1ADDR(0x1fff0000); + u8 mac0[ETH_ALEN], mac1[ETH_ALEN]; + u8 wmac0[ETH_ALEN], wmac1[ETH_ALEN]; + + ath79_parse_ascii_mac(mac + DIR825C1_MAC0_OFFSET, mac0); + ath79_parse_ascii_mac(mac + DIR825C1_MAC1_OFFSET, mac1); + + ath79_register_m25p80(NULL); + + ath79_register_gpio_keys_polled(-1, DIR825C1_KEYS_POLL_INTERVAL, + ARRAY_SIZE(dir825c1_gpio_keys), + dir825c1_gpio_keys); + + ath79_init_mac(wmac0, mac0, 0); + ath79_register_wmac(art + DIR825C1_WMAC_CALDATA_OFFSET, wmac0); + + ath79_init_mac(wmac1, mac1, 1); + ap91_pci_init(art + DIR825C1_PCIE_CALDATA_OFFSET, wmac1); + + ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_RGMII_GMAC0); + + mdiobus_register_board_info(dir825c1_mdio0_info, + ARRAY_SIZE(dir825c1_mdio0_info)); + + ath79_register_mdio(0, 0x0); + + ath79_init_mac(ath79_eth0_data.mac_addr, mac0, 0); + + /* GMAC0 is connected to an AR8327N switch */ + ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; + ath79_eth0_data.phy_mask = BIT(0); + ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev; + ath79_eth0_pll_data.pll_1000 = 0x06000000; + ath79_register_eth(0); + + ath79_register_usb(); +} + +static void __init dir825c1_setup(void) +{ + ath79_gpio_output_select(DIR825C1_GPIO_LED_BLUE_USB, + AR934X_GPIO_OUT_GPIO); + + gpio_request_one(DIR825C1_GPIO_WAN_LED_ENABLE, + GPIOF_OUT_INIT_LOW, "WAN LED enable"); + + ath79_register_leds_gpio(-1, ARRAY_SIZE(dir825c1_leds_gpio), + dir825c1_leds_gpio); + + ap9x_pci_setup_wmac_led_pin(0, 0); + + dir825c1_generic_setup(); +} + +static void __init dir835a1_setup(void) +{ + dir825c1_ar8327_data.led_cfg = NULL; + + ath79_register_leds_gpio(-1, ARRAY_SIZE(dir835a1_leds_gpio), + dir835a1_leds_gpio); + + dir825c1_generic_setup(); +} + +MIPS_MACHINE(ATH79_MACH_DIR_825_C1, "DIR-825-C1", + "D-Link DIR-825 rev. C1", + dir825c1_setup); + +MIPS_MACHINE(ATH79_MACH_DIR_835_A1, "DIR-835-A1", + "D-Link DIR-835 rev. A1", + dir835a1_setup); |