diff options
Diffstat (limited to 'target/linux/adm8668/files-3.18/arch/mips/adm8668')
12 files changed, 754 insertions, 0 deletions
diff --git a/target/linux/adm8668/files-3.18/arch/mips/adm8668/Kconfig b/target/linux/adm8668/files-3.18/arch/mips/adm8668/Kconfig new file mode 100644 index 0000000..2e7281f --- /dev/null +++ b/target/linux/adm8668/files-3.18/arch/mips/adm8668/Kconfig @@ -0,0 +1,2 @@ +config ARM_AMBA + def_bool y diff --git a/target/linux/adm8668/files-3.18/arch/mips/adm8668/Makefile b/target/linux/adm8668/files-3.18/arch/mips/adm8668/Makefile new file mode 100644 index 0000000..515c3a4 --- /dev/null +++ b/target/linux/adm8668/files-3.18/arch/mips/adm8668/Makefile @@ -0,0 +1,6 @@ +# +# something witty --neutronscott +# + +obj-y := irq.o prom.o platform.o gpio.o \ + setup.o clock.o time.o early_printk.o \ diff --git a/target/linux/adm8668/files-3.18/arch/mips/adm8668/Platform b/target/linux/adm8668/files-3.18/arch/mips/adm8668/Platform new file mode 100644 index 0000000..c70cd27 --- /dev/null +++ b/target/linux/adm8668/files-3.18/arch/mips/adm8668/Platform @@ -0,0 +1,6 @@ +# +# Infineon ADM8668 WildPass +# +platform-$(CONFIG_ADM8668) += adm8668/ +cflags-$(CONFIG_ADM8668) += -I$(srctree)/arch/mips/include/asm/mach-adm8668 +load-$(CONFIG_ADM8668) += 0xffffffff80002000 diff --git a/target/linux/adm8668/files-3.18/arch/mips/adm8668/clock.c b/target/linux/adm8668/files-3.18/arch/mips/adm8668/clock.c new file mode 100644 index 0000000..1e010fc --- /dev/null +++ b/target/linux/adm8668/files-3.18/arch/mips/adm8668/clock.c @@ -0,0 +1,76 @@ +/* + * ADM8668 minimal clock support + * + * Copyright (C) 2012, Florian Fainelli <florian@openwrt.org> + * + * Licensed under the terms of the GPLv2 + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/device.h> +#include <linux/err.h> +#include <linux/clk.h> + +#include <adm8668.h> + +struct clk { + unsigned long rate; +}; + +static struct clk uart_clk = { + .rate = 62500000, +}; + +static struct clk sys_clk; + +struct clk *clk_get(struct device *dev, const char *id) +{ + const char *lookup = id; + + if (dev) + lookup = dev_name(dev); + + if (!strcmp(lookup, "apb:uart0")) + return &uart_clk; + if (!strcmp(lookup, "sys")) + return &sys_clk; + + return ERR_PTR(-ENOENT); +} +EXPORT_SYMBOL(clk_get); + +int clk_enable(struct clk *clk) +{ + return 0; +} +EXPORT_SYMBOL(clk_enable); + +void clk_disable(struct clk *clk) +{ +} +EXPORT_SYMBOL(clk_disable); + +unsigned long clk_get_rate(struct clk *clk) +{ + return clk->rate; +} +EXPORT_SYMBOL(clk_get_rate); + +void clk_put(struct clk *clk) +{ +} +EXPORT_SYMBOL(clk_put); + +void __init adm8668_init_clocks(void) +{ + u32 adj; + + /* adjustable clock selection + * CR3 bit 14~11, 0000 -> 175MHz, 0001 -> 180MHz, etc... + */ + adj = (ADM8668_CONFIG_REG(ADM8668_CR3) >> 11) & 0xf; + sys_clk.rate = 175000000 + (adj * 5000000); + + pr_info("ADM8668 CPU clock: %lu MHz\n", sys_clk.rate / 1000000); +} diff --git a/target/linux/adm8668/files-3.18/arch/mips/adm8668/early_printk.c b/target/linux/adm8668/files-3.18/arch/mips/adm8668/early_printk.c new file mode 100644 index 0000000..03dd72a --- /dev/null +++ b/target/linux/adm8668/files-3.18/arch/mips/adm8668/early_printk.c @@ -0,0 +1,16 @@ +#include <linux/io.h> +#include <linux/amba/serial.h> +#include <adm8668.h> + +#define UART_READ(r) \ + __raw_readl((void __iomem *)(KSEG1ADDR(ADM8668_UART0_BASE) + (r))) + +#define UART_WRITE(v, r) \ + __raw_writel((v), (void __iomem *)(KSEG1ADDR(ADM8668_UART0_BASE) + (r))) + +void prom_putchar(char c) +{ + UART_WRITE(c, UART01x_DR); + while ((UART_READ(UART01x_FR) & UART01x_FR_TXFF) != 0) + ; +} diff --git a/target/linux/adm8668/files-3.18/arch/mips/adm8668/gpio.c b/target/linux/adm8668/files-3.18/arch/mips/adm8668/gpio.c new file mode 100644 index 0000000..fb39f7f --- /dev/null +++ b/target/linux/adm8668/files-3.18/arch/mips/adm8668/gpio.c @@ -0,0 +1,123 @@ +/* + * Infineon/ADMTek ADM8668 WildPass GPIO support + * + * Copyright (C) 2012 Florian Fainelli <florian@openwrt.org> + * + * Licensed under the terms of GPLv2. + * + */ +#include <linux/kernel.h> +#include <linux/gpio.h> +#include <linux/io.h> + +#include <adm8668.h> + +#define GPIO_MASK 0x3f + +#define GPIO_IN_OFS 0 +#define GPIO_OUT_OFS 6 +#define GPIO_OE_OFS 12 + +struct adm8668_gpio_chip { + void __iomem *base; + struct gpio_chip chip; +}; + +static int adm8668_gpio_dir_out(struct gpio_chip *chip, + unsigned offset, int value) +{ + struct adm8668_gpio_chip *c = + container_of(chip, struct adm8668_gpio_chip, chip); + u32 mask; + + /* clear input, set output enable and output value */ + mask = __raw_readl(c->base); + mask &= ~(1 << offset); + mask |= (1 << (offset + GPIO_OE_OFS)); + if (value) + mask |= (1 << (offset + GPIO_OUT_OFS)); + else + mask &= ~(1 << (offset + GPIO_OUT_OFS)); + __raw_writel(mask, c->base); + + return 0; +} + +static int adm8668_gpio_dir_in(struct gpio_chip *chip, + unsigned offset) +{ + struct adm8668_gpio_chip *c = + container_of(chip, struct adm8668_gpio_chip, chip); + u32 mask; + + mask = __raw_readl(c->base); + mask &= ~(((1 << (offset + GPIO_OE_OFS)) | (1 << (offset + GPIO_OUT_OFS)))); + mask |= (1 << offset); + __raw_writel(mask, c->base); + + return 0; +} + +static void adm8668_gpio_set(struct gpio_chip *chip, + unsigned offset, int value) +{ + struct adm8668_gpio_chip *c = + container_of(chip, struct adm8668_gpio_chip, chip); + u32 mask; + + mask = __raw_readl(c->base); + if (value) + mask |= (1 << (offset + GPIO_OUT_OFS)); + else + mask &= ~(1 << (offset + GPIO_OUT_OFS)); + __raw_writel(mask, c->base); +} + +static int adm8668_gpio_get(struct gpio_chip *chip, + unsigned offset) +{ + struct adm8668_gpio_chip *c = + container_of(chip, struct adm8668_gpio_chip, chip); + u32 value; + + value = __raw_readl(c->base) & GPIO_MASK; + + return value & (1 << offset); +} + +static struct adm8668_gpio_chip adm8668_gpio_cpu = { + .base = (void __iomem *)KSEG1ADDR(ADM8668_CONFIG_BASE + CRGPIO_REG), + .chip = { + .label = "adm8668-cpu-gpio", + .direction_output = adm8668_gpio_dir_out, + .direction_input = adm8668_gpio_dir_in, + .set = adm8668_gpio_set, + .get = adm8668_gpio_get, + .ngpio = 6, + }, +}; + +static struct adm8668_gpio_chip adm8668_gpio_wlan = { + .base = (void __iomem *)KSEG1ADDR(ADM8668_WLAN_BASE + GPIO_REG), + .chip = { + .label = "adm8668-wlan-gpio", + .direction_output = adm8668_gpio_dir_out, + .direction_input = adm8668_gpio_dir_in, + .set = adm8668_gpio_set, + .get = adm8668_gpio_get, + .ngpio = 6, + .base = 6, + }, +}; + +static int __init adm8668_gpio_init(void) +{ + int ret; + + ret = gpiochip_add(&adm8668_gpio_cpu.chip); + if (ret) + return ret; + + return gpiochip_add(&adm8668_gpio_wlan.chip); +} +arch_initcall(adm8668_gpio_init); diff --git a/target/linux/adm8668/files-3.18/arch/mips/adm8668/irq.c b/target/linux/adm8668/files-3.18/arch/mips/adm8668/irq.c new file mode 100644 index 0000000..9d3b2b9 --- /dev/null +++ b/target/linux/adm8668/files-3.18/arch/mips/adm8668/irq.c @@ -0,0 +1,126 @@ +/* + * Copyright (C) 2010 Scott Nicholas <neutronscott@scottn.us> + * Copyright (C) 2012 Florian Fainelli <florian@openwrt.org> + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ + +#include <linux/init.h> +#include <linux/kernel_stat.h> +#include <linux/signal.h> +#include <linux/sched.h> +#include <linux/interrupt.h> +#include <linux/slab.h> +#include <linux/random.h> +#include <linux/pm.h> +#include <linux/irq.h> +#include <asm/mipsregs.h> +#include <asm/irq_cpu.h> +#include <asm/irq.h> +#include <adm8668.h> + +/* interrupt controller */ +#define IRQ_STATUS_REG 0x00 /* Read */ +#define IRQ_ENABLE_REG 0x08 /* Read/Write */ +#define IRQ_DISABLE_REG 0x0C /* Write */ + +#define IRQ_MASK 0xffff + +static inline void intc_write_reg(u32 val, unsigned int reg) +{ + void __iomem *base = (void __iomem *)KSEG1ADDR(ADM8668_INTC_BASE); + + __raw_writel(val, base + reg); +} + +static inline u32 intc_read_reg(unsigned int reg) +{ + void __iomem *base = (void __iomem *)KSEG1ADDR(ADM8668_INTC_BASE); + + return __raw_readl(base + reg); +} + +static void adm8668_irq_cascade(void) +{ + int irq; + u32 intsrc; + + intsrc = intc_read_reg(IRQ_STATUS_REG) & IRQ_MASK; + if (intsrc) { + irq = fls(intsrc) - 1; + do_IRQ(irq); + } else + spurious_interrupt(); +} + +/* + * System irq dispatch + */ +void plat_irq_dispatch(void) +{ + unsigned int pending; + + pending = read_c0_cause() & read_c0_status() & ST0_IM; + + /* timer interrupt, that we renumbered */ + if (pending & STATUSF_IP7) + do_IRQ(MIPS_CPU_IRQ_BASE + 7); + else if (pending & STATUSF_IP2) + adm8668_irq_cascade(); + else + spurious_interrupt(); +} + +/* + * enable 8668 irq + */ +static void enable_adm8668_irq(struct irq_data *d) +{ + intc_write_reg((1 << d->irq), IRQ_ENABLE_REG); +} + + +static void ack_adm8668_irq(struct irq_data *d) +{ + intc_write_reg((1 << d->irq), IRQ_DISABLE_REG); +} + +/* + * system irq type + */ + +static struct irq_chip adm8668_irq_type = { + .name = "adm8668", + .irq_ack = ack_adm8668_irq, + .irq_mask = ack_adm8668_irq, + .irq_unmask = enable_adm8668_irq +}; + +/* + * irq init + */ +static void __init init_adm8668_irqs(void) +{ + int i; + + /* disable all interrupts for the moment */ + intc_write_reg(IRQ_MASK, IRQ_DISABLE_REG); + + for (i = 0; i <= ADM8668_IRQ_MAX; i++) + irq_set_chip_and_handler(i, &adm8668_irq_type, + handle_level_irq); + + /* hw0 is where our interrupts are uh.. interrupted at. */ + set_c0_status(IE_IRQ0); +} + +/* + * system init + */ +void __init arch_init_irq(void) +{ + mips_cpu_irq_init(); + init_adm8668_irqs(); +} diff --git a/target/linux/adm8668/files-3.18/arch/mips/adm8668/platform.c b/target/linux/adm8668/files-3.18/arch/mips/adm8668/platform.c new file mode 100644 index 0000000..9e40691 --- /dev/null +++ b/target/linux/adm8668/files-3.18/arch/mips/adm8668/platform.c @@ -0,0 +1,196 @@ +/* + * Copyright (C) 2010 Scott Nicholas <neutronscott@scottn.us> + * Copyright (C) 2012 Florian Fainelli <florian@openwrt.org> + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ + +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/platform_device.h> +#include <linux/platform_data/tulip.h> +#include <linux/usb/ehci_pdriver.h> +#include <linux/mtd/physmap.h> +#include <linux/pci.h> +#include <linux/slab.h> +#include <linux/ioport.h> +#include <linux/amba/bus.h> +#include <linux/amba/serial.h> + +#include <asm/reboot.h> +#include <asm/time.h> +#include <asm/addrspace.h> +#include <asm/bootinfo.h> +#include <asm/io.h> +#include <adm8668.h> + +#define ADM8868_UBOOT_ENV 0x20000 +#define ADM8868_UBOOT_WAN_MAC 0x5ac +#define ADM8868_UBOOT_LAN_MAC 0x404 + +static void adm8668_uart_set_mctrl(struct amba_device *dev, + void __iomem *base, + unsigned int mcrtl) +{ +} + +static struct amba_pl010_data adm8668_uart0_data = { + .set_mctrl = adm8668_uart_set_mctrl, +}; + +static struct amba_device adm8668_uart0_device = { + .dev = { + .init_name = "apb:uart0", + .platform_data = &adm8668_uart0_data, + }, + .res = { + .start = ADM8668_UART0_BASE, + .end = ADM8668_UART0_BASE + 0xF, + .flags = IORESOURCE_MEM, + }, + .irq = { + ADM8668_UART0_IRQ, + -1 + }, + .periphid = 0x0041010, +}; + +static struct resource eth0_resources[] = { + { + .start = ADM8668_LAN_BASE, + .end = ADM8668_LAN_BASE + 256, + .flags = IORESOURCE_MEM, + }, + { + .start = ADM8668_LAN_IRQ, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct tulip_platform_data eth0_pdata = { + .chip_id = ADM8668, +}; + +static struct platform_device adm8668_eth0_device = { + .name = "tulip", + .id = 0, + .resource = eth0_resources, + .num_resources = ARRAY_SIZE(eth0_resources), + .dev.platform_data = ð0_pdata, +}; + +static struct resource eth1_resources[] = { + { + .start = ADM8668_WAN_BASE, + .end = ADM8668_WAN_BASE + 256, + .flags = IORESOURCE_MEM, + }, + { + .start = ADM8668_WAN_IRQ, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct tulip_platform_data eth1_pdata = { + .chip_id = ADM8668, +}; + +static struct platform_device adm8668_eth1_device = { + .name = "tulip", + .id = 1, + .resource = eth1_resources, + .num_resources = ARRAY_SIZE(eth1_resources), + .dev.platform_data = ð1_pdata, +}; + +static struct resource usb_resources[] = { + { + .start = ADM8668_USB_BASE, + .end = ADM8668_USB_BASE + 0x1FFFFF, + .flags = IORESOURCE_MEM, + }, + { + .start = ADM8668_USB_IRQ, + .end = ADM8668_USB_IRQ, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct usb_ehci_pdata usb_pdata = { + .caps_offset = 0x100, + .has_tt = 1, +}; + +static struct platform_device adm8668_usb_device = { + .name = "ehci-platform", + .id = -1, + .resource = usb_resources, + .num_resources = ARRAY_SIZE(usb_resources), + .dev.platform_data = &usb_pdata, +}; + +static struct platform_device *adm8668_devs[] = { + &adm8668_eth0_device, + &adm8668_eth1_device, + &adm8668_usb_device, +}; + +static void adm8668_fetch_mac(int unit) +{ + u8 *mac; + u32 offset; + struct tulip_platform_data *pdata; + + switch (unit) { + case -1: + case 0: + offset = ADM8868_UBOOT_LAN_MAC; + pdata = ð0_pdata; + break; + case 1: + offset = ADM8868_UBOOT_WAN_MAC; + pdata = ð1_pdata; + break; + default: + pr_err("unsupported ethernet unit: %d\n", unit); + return; + } + + mac = (u8 *)(KSEG1ADDR(ADM8668_SMEM1_BASE) + ADM8868_UBOOT_ENV + offset); + + memcpy(pdata->mac, mac, sizeof(pdata->mac)); +} + +static void adm8668_ehci_workaround(void) +{ + u32 chipid; + + chipid = ADM8668_CONFIG_REG(ADM8668_CR0); + ADM8668_CONFIG_REG(ADM8668_CR66) = 0x0C1600D9; + + if (chipid == 0x86880001) + return; + + ADM8668_CONFIG_REG(ADM8668_CR66) &= ~(3 << 20); + ADM8668_CONFIG_REG(ADM8668_CR66) |= (1 << 20); + pr_info("ADM8668: applied USB workaround\n"); +} + + +int __init adm8668_devs_register(void) +{ + int ret; + + ret = amba_device_register(&adm8668_uart0_device, &iomem_resource); + if (ret) + panic("failed to register AMBA UART"); + + adm8668_fetch_mac(0); + adm8668_fetch_mac(1); + adm8668_ehci_workaround(); + + return platform_add_devices(adm8668_devs, ARRAY_SIZE(adm8668_devs)); +} +arch_initcall(adm8668_devs_register); diff --git a/target/linux/adm8668/files-3.18/arch/mips/adm8668/prom.c b/target/linux/adm8668/files-3.18/arch/mips/adm8668/prom.c new file mode 100644 index 0000000..24b77f8 --- /dev/null +++ b/target/linux/adm8668/files-3.18/arch/mips/adm8668/prom.c @@ -0,0 +1,95 @@ +/* + * Copyright (C) 2010 Scott Nicholas <neutronscott@scottn.us> + * + * based on work of rb532 prom.c + * Copyright (C) 2003, Peter Sadik <peter.sadik@idt.com> + * Copyright (C) 2005-2006, P.Christeas <p_christ@hol.gr> + * Copyright (C) 2007, Gabor Juhos <juhosg@openwrt.org> + * Felix Fietkau <nbd@openwrt.org> + * Florian Fainelli <florian@openwrt.org> + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ + +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/console.h> +#include <linux/string.h> +#include <linux/serial_core.h> +#include <asm/bootinfo.h> +#include <adm8668.h> +#include "u-boot.h" + +register volatile struct global_data *gd asm ("k0"); + +void __init prom_free_prom_memory(void) +{ + /* No prom memory to free */ +} + +static inline int match_tag(char *arg, const char *tag) +{ + return strncmp(arg, tag, strlen(tag)) == 0; +} + +static inline unsigned long tag2ul(char *arg, const char *tag) +{ + char *num; + + num = arg + strlen(tag); + return simple_strtoul(num, 0, 10); +} + +void __init prom_setup_cmdline(void) +{ + char *cp; + int prom_argc; + char **prom_argv; + int i; + + prom_argc = fw_arg0; + prom_argv = (char **)KSEG0ADDR(fw_arg1); + + cp = &(arcs_cmdline[0]); + for (i = 1; i < prom_argc; i++) { + prom_argv[i] = (char *)KSEG0ADDR(prom_argv[i]); + + /* default bootargs has "console=/dev/ttyS0" yet console won't + * show up at all if you include the '/dev/' nowadays ... */ + if (match_tag(prom_argv[i], "console=/dev/")) { + char *ptr = prom_argv[i] + strlen("console=/dev/"); + + strcpy(cp, "console="); + cp += strlen("console="); + strcpy(cp, ptr); + cp += strlen(ptr); + *cp++ = ' '; + continue; + } + strcpy(cp, prom_argv[i]); + cp += strlen(prom_argv[i]); + *cp++ = ' '; + } + if (prom_argc > 1) + --cp; /* trailing space */ + + *cp = '\0'; +} + +void __init prom_init(void) +{ + bd_t *bd = gd->bd; + int memsize; + + memsize = bd->bi_memsize; + printk("Board info:\n"); + printk(" RAM size: %d MB\n", (int)memsize/(1024*1024)); + printk(" NOR start: %#lx\n", bd->bi_flashstart); + printk(" NOR size: %#lx\n", bd->bi_flashsize); + + prom_setup_cmdline(); + add_memory_region(0, memsize, BOOT_MEM_RAM); +} diff --git a/target/linux/adm8668/files-3.18/arch/mips/adm8668/setup.c b/target/linux/adm8668/files-3.18/arch/mips/adm8668/setup.c new file mode 100644 index 0000000..b33c483 --- /dev/null +++ b/target/linux/adm8668/files-3.18/arch/mips/adm8668/setup.c @@ -0,0 +1,36 @@ +#include <linux/init.h> +#include <linux/reboot.h> + +#include <asm/reboot.h> +#include <adm8668.h> + +static void adm8668_restart(char *cmd) +{ + int i; + + /* the real deal */ + for (i = 0; i < 1000; i++) + ; + ADM8668_CONFIG_REG(ADM8668_CR1) = 1; +} + +void __init plat_mem_setup(void) +{ + _machine_restart = adm8668_restart; +} + +const char *get_system_type(void) +{ + unsigned long chipid = ADM8668_CONFIG_REG(ADM8668_CR0); + int product, revision; + static char ret[32]; + + product = chipid >> 16; + revision = chipid & 0xffff; + + /* i getting fancy :\ */ + snprintf(ret, sizeof(ret), "ADM%xr%x", product, revision); + + return ret; +} + diff --git a/target/linux/adm8668/files-3.18/arch/mips/adm8668/time.c b/target/linux/adm8668/files-3.18/arch/mips/adm8668/time.c new file mode 100644 index 0000000..87bdd66 --- /dev/null +++ b/target/linux/adm8668/files-3.18/arch/mips/adm8668/time.c @@ -0,0 +1,20 @@ +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/clk.h> + +#include <asm/time.h> +#include <adm8668.h> + +void __init plat_time_init(void) +{ + struct clk *sys_clk; + + adm8668_init_clocks(); + + sys_clk = clk_get(NULL, "sys"); + if (IS_ERR(sys_clk)) + panic("unable to get system clock\n"); + + mips_hpt_frequency = clk_get_rate(sys_clk) / 2; +} + diff --git a/target/linux/adm8668/files-3.18/arch/mips/adm8668/u-boot.h b/target/linux/adm8668/files-3.18/arch/mips/adm8668/u-boot.h new file mode 100644 index 0000000..d9d2268 --- /dev/null +++ b/target/linux/adm8668/files-3.18/arch/mips/adm8668/u-boot.h @@ -0,0 +1,52 @@ +/* + * (C) Copyright 2003 + * Wolfgang Denk, DENX Software Engineering, <wd@denx.de> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef _U_BOOT_H_ +#define _U_BOOT_H_ 1 + +typedef struct bd_info { + int bi_baudrate; /* serial console baudrate */ + unsigned long bi_ip_addr; /* IP Address */ + unsigned char bi_enetaddr[6]; /* Ethernet adress */ + unsigned long bi_arch_number; /* unique id for this board */ + unsigned long bi_boot_params; /* where this board expects params */ + unsigned long bi_memstart; /* start of DRAM memory */ + unsigned long bi_memsize; /* size of DRAM memory in bytes */ + unsigned long bi_flashstart; /* start of FLASH memory */ + unsigned long bi_flashsize; /* size of FLASH memory */ + unsigned long bi_flashoffset; /* reserved area for startup monitor */ +} bd_t; + +struct global_data { + bd_t *bd; /* board data... */ + unsigned long flags; + unsigned long baudrate; + unsigned long have_console; /* serial_init() was called */ + unsigned long ram_size; /* RAM size */ + unsigned long reloc_off; /* Relocation Offset */ + unsigned long env_addr; /* Address of Environment struct */ + unsigned long env_valid; /* Checksum of Environment valid? */ + void **jt; /* jump table */ +}; + +#endif /* _U_BOOT_H_ */ |