aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/adm5120/image/lzma-loader
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/adm5120/image/lzma-loader')
-rw-r--r--target/linux/adm5120/image/lzma-loader/Makefile62
-rw-r--r--target/linux/adm5120/image/lzma-loader/src/LzmaDecode.c584
-rw-r--r--target/linux/adm5120/image/lzma-loader/src/LzmaDecode.h113
-rw-r--r--target/linux/adm5120/image/lzma-loader/src/LzmaTypes.h45
-rw-r--r--target/linux/adm5120/image/lzma-loader/src/Makefile99
-rw-r--r--target/linux/adm5120/image/lzma-loader/src/README55
-rw-r--r--target/linux/adm5120/image/lzma-loader/src/board.c185
-rw-r--r--target/linux/adm5120/image/lzma-loader/src/config.h143
-rw-r--r--target/linux/adm5120/image/lzma-loader/src/decompress.c353
-rw-r--r--target/linux/adm5120/image/lzma-loader/src/head.S209
-rw-r--r--target/linux/adm5120/image/lzma-loader/src/loader.lds29
-rw-r--r--target/linux/adm5120/image/lzma-loader/src/lzma-data.lds8
-rw-r--r--target/linux/adm5120/image/lzma-loader/src/printf.c350
-rw-r--r--target/linux/adm5120/image/lzma-loader/src/printf.h18
14 files changed, 2253 insertions, 0 deletions
diff --git a/target/linux/adm5120/image/lzma-loader/Makefile b/target/linux/adm5120/image/lzma-loader/Makefile
new file mode 100644
index 0000000..36dfd09
--- /dev/null
+++ b/target/linux/adm5120/image/lzma-loader/Makefile
@@ -0,0 +1,62 @@
+#
+# Copyright (C) 2006 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+include $(TOPDIR)/rules.mk
+
+LOADER := loader.bin
+LOADER_NAME := $(basename $(notdir $(LOADER)))
+LOADER_DATA :=
+TARGET_DIR :=
+
+ifeq ($(TARGET_DIR),)
+TARGET_DIR := $(KDIR)
+endif
+
+LOADER_BIN := $(TARGET_DIR)/$(LOADER_NAME).bin
+LOADER_GZ := $(TARGET_DIR)/$(LOADER_NAME).gz
+LOADER_ELF := $(TARGET_DIR)/$(LOADER_NAME).elf
+
+LZMA_STARTUP_ORG:= 0
+LZMA_TEXT_START := 0x80300000
+
+PKG_NAME := lzma-loader
+PKG_BUILD_DIR := $(KDIR)/$(PKG_NAME)
+
+.PHONY : loader-compile loader.bin loader.elf loader.gz
+
+$(PKG_BUILD_DIR)/.prepared:
+ mkdir $(PKG_BUILD_DIR)
+ $(CP) ./src/* $(PKG_BUILD_DIR)/
+ touch $@
+
+loader-compile: $(PKG_BUILD_DIR)/.prepared
+ $(MAKE) -C $(PKG_BUILD_DIR) CROSS_COMPILE="$(TARGET_CROSS)" \
+ LZMA_STARTUP_ORG=$(LZMA_STARTUP_ORG) \
+ LZMA_TEXT_START=$(LZMA_TEXT_START) \
+ LOADER_DATA=$(LOADER_DATA) \
+ CONFIG_BOARD=$(CONFIG_BOARD) \
+ CONFIG_PASS_KARGS=$(CONFIG_PASS_KARGS) \
+ clean all
+
+loader.gz: $(PKG_BUILD_DIR)/loader.bin
+ gzip -nc9 $< > $(LOADER_GZ)
+
+loader.elf: $(PKG_BUILD_DIR)/loader.elf
+ $(CP) $< $(LOADER_ELF)
+
+loader.bin: $(PKG_BUILD_DIR)/loader.bin
+ $(CP) $< $(LOADER_BIN)
+
+download:
+prepare: $(PKG_BUILD_DIR)/.prepared
+compile: loader-compile
+
+install:
+
+clean:
+ rm -rf $(PKG_BUILD_DIR)
+
diff --git a/target/linux/adm5120/image/lzma-loader/src/LzmaDecode.c b/target/linux/adm5120/image/lzma-loader/src/LzmaDecode.c
new file mode 100644
index 0000000..cb83453
--- /dev/null
+++ b/target/linux/adm5120/image/lzma-loader/src/LzmaDecode.c
@@ -0,0 +1,584 @@
+/*
+ LzmaDecode.c
+ LZMA Decoder (optimized for Speed version)
+
+ LZMA SDK 4.40 Copyright (c) 1999-2006 Igor Pavlov (2006-05-01)
+ http://www.7-zip.org/
+
+ LZMA SDK is licensed under two licenses:
+ 1) GNU Lesser General Public License (GNU LGPL)
+ 2) Common Public License (CPL)
+ It means that you can select one of these two licenses and
+ follow rules of that license.
+
+ SPECIAL EXCEPTION:
+ Igor Pavlov, as the author of this Code, expressly permits you to
+ statically or dynamically link your Code (or bind by name) to the
+ interfaces of this file without subjecting your linked Code to the
+ terms of the CPL or GNU LGPL. Any modifications or additions
+ to this file, however, are subject to the LGPL or CPL terms.
+*/
+
+#include "LzmaDecode.h"
+
+#define kNumTopBits 24
+#define kTopValue ((UInt32)1 << kNumTopBits)
+
+#define kNumBitModelTotalBits 11
+#define kBitModelTotal (1 << kNumBitModelTotalBits)
+#define kNumMoveBits 5
+
+#define RC_READ_BYTE (*Buffer++)
+
+#define RC_INIT2 Code = 0; Range = 0xFFFFFFFF; \
+ { int i; for(i = 0; i < 5; i++) { RC_TEST; Code = (Code << 8) | RC_READ_BYTE; }}
+
+#ifdef _LZMA_IN_CB
+
+#define RC_TEST { if (Buffer == BufferLim) \
+ { SizeT size; int result = InCallback->Read(InCallback, &Buffer, &size); if (result != LZMA_RESULT_OK) return result; \
+ BufferLim = Buffer + size; if (size == 0) return LZMA_RESULT_DATA_ERROR; }}
+
+#define RC_INIT Buffer = BufferLim = 0; RC_INIT2
+
+#else
+
+#define RC_TEST { if (Buffer == BufferLim) return LZMA_RESULT_DATA_ERROR; }
+
+#define RC_INIT(buffer, bufferSize) Buffer = buffer; BufferLim = buffer + bufferSize; RC_INIT2
+
+#endif
+
+#define RC_NORMALIZE if (Range < kTopValue) { RC_TEST; Range <<= 8; Code = (Code << 8) | RC_READ_BYTE; }
+
+#define IfBit0(p) RC_NORMALIZE; bound = (Range >> kNumBitModelTotalBits) * *(p); if (Code < bound)
+#define UpdateBit0(p) Range = bound; *(p) += (kBitModelTotal - *(p)) >> kNumMoveBits;
+#define UpdateBit1(p) Range -= bound; Code -= bound; *(p) -= (*(p)) >> kNumMoveBits;
+
+#define RC_GET_BIT2(p, mi, A0, A1) IfBit0(p) \
+ { UpdateBit0(p); mi <<= 1; A0; } else \
+ { UpdateBit1(p); mi = (mi + mi) + 1; A1; }
+
+#define RC_GET_BIT(p, mi) RC_GET_BIT2(p, mi, ; , ;)
+
+#define RangeDecoderBitTreeDecode(probs, numLevels, res) \
+ { int i = numLevels; res = 1; \
+ do { CProb *p = probs + res; RC_GET_BIT(p, res) } while(--i != 0); \
+ res -= (1 << numLevels); }
+
+
+#define kNumPosBitsMax 4
+#define kNumPosStatesMax (1 << kNumPosBitsMax)
+
+#define kLenNumLowBits 3
+#define kLenNumLowSymbols (1 << kLenNumLowBits)
+#define kLenNumMidBits 3
+#define kLenNumMidSymbols (1 << kLenNumMidBits)
+#define kLenNumHighBits 8
+#define kLenNumHighSymbols (1 << kLenNumHighBits)
+
+#define LenChoice 0
+#define LenChoice2 (LenChoice + 1)
+#define LenLow (LenChoice2 + 1)
+#define LenMid (LenLow + (kNumPosStatesMax << kLenNumLowBits))
+#define LenHigh (LenMid + (kNumPosStatesMax << kLenNumMidBits))
+#define kNumLenProbs (LenHigh + kLenNumHighSymbols)
+
+
+#define kNumStates 12
+#define kNumLitStates 7
+
+#define kStartPosModelIndex 4
+#define kEndPosModelIndex 14
+#define kNumFullDistances (1 << (kEndPosModelIndex >> 1))
+
+#define kNumPosSlotBits 6
+#define kNumLenToPosStates 4
+
+#define kNumAlignBits 4
+#define kAlignTableSize (1 << kNumAlignBits)
+
+#define kMatchMinLen 2
+
+#define IsMatch 0
+#define IsRep (IsMatch + (kNumStates << kNumPosBitsMax))
+#define IsRepG0 (IsRep + kNumStates)
+#define IsRepG1 (IsRepG0 + kNumStates)
+#define IsRepG2 (IsRepG1 + kNumStates)
+#define IsRep0Long (IsRepG2 + kNumStates)
+#define PosSlot (IsRep0Long + (kNumStates << kNumPosBitsMax))
+#define SpecPos (PosSlot + (kNumLenToPosStates << kNumPosSlotBits))
+#define Align (SpecPos + kNumFullDistances - kEndPosModelIndex)
+#define LenCoder (Align + kAlignTableSize)
+#define RepLenCoder (LenCoder + kNumLenProbs)
+#define Literal (RepLenCoder + kNumLenProbs)
+
+#if Literal != LZMA_BASE_SIZE
+StopCompilingDueBUG
+#endif
+
+int LzmaDecodeProperties(CLzmaProperties *propsRes, const unsigned char *propsData, int size)
+{
+ unsigned char prop0;
+ if (size < LZMA_PROPERTIES_SIZE)
+ return LZMA_RESULT_DATA_ERROR;
+ prop0 = propsData[0];
+ if (prop0 >= (9 * 5 * 5))
+ return LZMA_RESULT_DATA_ERROR;
+ {
+ for (propsRes->pb = 0; prop0 >= (9 * 5); propsRes->pb++, prop0 -= (9 * 5));
+ for (propsRes->lp = 0; prop0 >= 9; propsRes->lp++, prop0 -= 9);
+ propsRes->lc = prop0;
+ /*
+ unsigned char remainder = (unsigned char)(prop0 / 9);
+ propsRes->lc = prop0 % 9;
+ propsRes->pb = remainder / 5;
+ propsRes->lp = remainder % 5;
+ */
+ }
+
+ #ifdef _LZMA_OUT_READ
+ {
+ int i;
+ propsRes->DictionarySize = 0;
+ for (i = 0; i < 4; i++)
+ propsRes->DictionarySize += (UInt32)(propsData[1 + i]) << (i * 8);
+ if (propsRes->DictionarySize == 0)
+ propsRes->DictionarySize = 1;
+ }
+ #endif
+ return LZMA_RESULT_OK;
+}
+
+#define kLzmaStreamWasFinishedId (-1)
+
+int LzmaDecode(CLzmaDecoderState *vs,
+ #ifdef _LZMA_IN_CB
+ ILzmaInCallback *InCallback,
+ #else
+ const unsigned char *inStream, SizeT inSize, SizeT *inSizeProcessed,
+ #endif
+ unsigned char *outStream, SizeT outSize, SizeT *outSizeProcessed)
+{
+ CProb *p = vs->Probs;
+ SizeT nowPos = 0;
+ Byte previousByte = 0;
+ UInt32 posStateMask = (1 << (vs->Properties.pb)) - 1;
+ UInt32 literalPosMask = (1 << (vs->Properties.lp)) - 1;
+ int lc = vs->Properties.lc;
+
+ #ifdef _LZMA_OUT_READ
+
+ UInt32 Range = vs->Range;
+ UInt32 Code = vs->Code;
+ #ifdef _LZMA_IN_CB
+ const Byte *Buffer = vs->Buffer;
+ const Byte *BufferLim = vs->BufferLim;
+ #else
+ const Byte *Buffer = inStream;
+ const Byte *BufferLim = inStream + inSize;
+ #endif
+ int state = vs->State;
+ UInt32 rep0 = vs->Reps[0], rep1 = vs->Reps[1], rep2 = vs->Reps[2], rep3 = vs->Reps[3];
+ int len = vs->RemainLen;
+ UInt32 globalPos = vs->GlobalPos;
+ UInt32 distanceLimit = vs->DistanceLimit;
+
+ Byte *dictionary = vs->Dictionary;
+ UInt32 dictionarySize = vs->Properties.DictionarySize;
+ UInt32 dictionaryPos = vs->DictionaryPos;
+
+ Byte tempDictionary[4];
+
+ #ifndef _LZMA_IN_CB
+ *inSizeProcessed = 0;
+ #endif
+ *outSizeProcessed = 0;
+ if (len == kLzmaStreamWasFinishedId)
+ return LZMA_RESULT_OK;
+
+ if (dictionarySize == 0)
+ {
+ dictionary = tempDictionary;
+ dictionarySize = 1;
+ tempDictionary[0] = vs->TempDictionary[0];
+ }
+
+ if (len == kLzmaNeedInitId)
+ {
+ {
+ UInt32 numProbs = Literal + ((UInt32)LZMA_LIT_SIZE << (lc + vs->Properties.lp));
+ UInt32 i;
+ for (i = 0; i < numProbs; i++)
+ p[i] = kBitModelTotal >> 1;
+ rep0 = rep1 = rep2 = rep3 = 1;
+ state = 0;
+ globalPos = 0;
+ distanceLimit = 0;
+ dictionaryPos = 0;
+ dictionary[dictionarySize - 1] = 0;
+ #ifdef _LZMA_IN_CB
+ RC_INIT;
+ #else
+ RC_INIT(inStream, inSize);
+ #endif
+ }
+ len = 0;
+ }
+ while(len != 0 && nowPos < outSize)
+ {
+ UInt32 pos = dictionaryPos - rep0;
+ if (pos >= dictionarySize)
+ pos += dictionarySize;
+ outStream[nowPos++] = dictionary[dictionaryPos] = dictionary[pos];
+ if (++dictionaryPos == dictionarySize)
+ dictionaryPos = 0;
+ len--;
+ }
+ if (dictionaryPos == 0)
+ previousByte = dictionary[dictionarySize - 1];
+ else
+ previousByte = dictionary[dictionaryPos - 1];
+
+ #else /* if !_LZMA_OUT_READ */
+
+ int state = 0;
+ UInt32 rep0 = 1, rep1 = 1, rep2 = 1, rep3 = 1;
+ int len = 0;
+ const Byte *Buffer;
+ const Byte *BufferLim;
+ UInt32 Range;
+ UInt32 Code;
+
+ #ifndef _LZMA_IN_CB
+ *inSizeProcessed = 0;
+ #endif
+ *outSizeProcessed = 0;
+
+ {
+ UInt32 i;
+ UInt32 numProbs = Literal + ((UInt32)LZMA_LIT_SIZE << (lc + vs->Properties.lp));
+ for (i = 0; i < numProbs; i++)
+ p[i] = kBitModelTotal >> 1;
+ }
+
+ #ifdef _LZMA_IN_CB
+ RC_INIT;
+ #else
+ RC_INIT(inStream, inSize);
+ #endif
+
+ #endif /* _LZMA_OUT_READ */
+
+ while(nowPos < outSize)
+ {
+ CProb *prob;
+ UInt32 bound;
+ int posState = (int)(
+ (nowPos
+ #ifdef _LZMA_OUT_READ
+ + globalPos
+ #endif
+ )
+ & posStateMask);
+
+ prob = p + IsMatch + (state << kNumPosBitsMax) + posState;
+ IfBit0(prob)
+ {
+ int symbol = 1;
+ UpdateBit0(prob)
+ prob = p + Literal + (LZMA_LIT_SIZE *
+ (((
+ (nowPos
+ #ifdef _LZMA_OUT_READ
+ + globalPos
+ #endif
+ )
+ & literalPosMask) << lc) + (previousByte >> (8 - lc))));
+
+ if (state >= kNumLitStates)
+ {
+ int matchByte;
+ #ifdef _LZMA_OUT_READ
+ UInt32 pos = dictionaryPos - rep0;
+ if (pos >= dictionarySize)
+ pos += dictionarySize;
+ matchByte = dictionary[pos];
+ #else
+ matchByte = outStream[nowPos - rep0];
+ #endif
+ do
+ {
+ int bit;
+ CProb *probLit;
+ matchByte <<= 1;
+ bit = (matchByte & 0x100);
+ probLit = prob + 0x100 + bit + symbol;
+ RC_GET_BIT2(probLit, symbol, if (bit != 0) break, if (bit == 0) break)
+ }
+ while (symbol < 0x100);
+ }
+ while (symbol < 0x100)
+ {
+ CProb *probLit = prob + symbol;
+ RC_GET_BIT(probLit, symbol)
+ }
+ previousByte = (Byte)symbol;
+
+ outStream[nowPos++] = previousByte;
+ #ifdef _LZMA_OUT_READ
+ if (distanceLimit < dictionarySize)
+ distanceLimit++;
+
+ dictionary[dictionaryPos] = previousByte;
+ if (++dictionaryPos == dictionarySize)
+ dictionaryPos = 0;
+ #endif
+ if (state < 4) state = 0;
+ else if (state < 10) state -= 3;
+ else state -= 6;
+ }
+ else
+ {
+ UpdateBit1(prob);
+ prob = p + IsRep + state;
+ IfBit0(prob)
+ {
+ UpdateBit0(prob);
+ rep3 = rep2;
+ rep2 = rep1;
+ rep1 = rep0;
+ state = state < kNumLitStates ? 0 : 3;
+ prob = p + LenCoder;
+ }
+ else
+ {
+ UpdateBit1(prob);
+ prob = p + IsRepG0 + state;
+ IfBit0(prob)
+ {
+ UpdateBit0(prob);
+ prob = p + IsRep0Long + (state << kNumPosBitsMax) + posState;
+ IfBit0(prob)
+ {
+ #ifdef _LZMA_OUT_READ
+ UInt32 pos;
+ #endif
+ UpdateBit0(prob);
+
+ #ifdef _LZMA_OUT_READ
+ if (distanceLimit == 0)
+ #else
+ if (nowPos == 0)
+ #endif
+ return LZMA_RESULT_DATA_ERROR;
+
+ state = state < kNumLitStates ? 9 : 11;
+ #ifdef _LZMA_OUT_READ
+ pos = dictionaryPos - rep0;
+ if (pos >= dictionarySize)
+ pos += dictionarySize;
+ previousByte = dictionary[pos];
+ dictionary[dictionaryPos] = previousByte;
+ if (++dictionaryPos == dictionarySize)
+ dictionaryPos = 0;
+ #else
+ previousByte = outStream[nowPos - rep0];
+ #endif
+ outStream[nowPos++] = previousByte;
+ #ifdef _LZMA_OUT_READ
+ if (distanceLimit < dictionarySize)
+ distanceLimit++;
+ #endif
+
+ continue;
+ }
+ else
+ {
+ UpdateBit1(prob);
+ }
+ }
+ else
+ {
+ UInt32 distance;
+ UpdateBit1(prob);
+ prob = p + IsRepG1 + state;
+ IfBit0(prob)
+ {
+ UpdateBit0(prob);
+ distance = rep1;
+ }
+ else
+ {
+ UpdateBit1(prob);
+ prob = p + IsRepG2 + state;
+ IfBit0(prob)
+ {
+ UpdateBit0(prob);
+ distance = rep2;
+ }
+ else
+ {
+ UpdateBit1(prob);
+ distance = rep3;
+ rep3 = rep2;
+ }
+ rep2 = rep1;
+ }
+ rep1 = rep0;
+ rep0 = distance;
+ }
+ state = state < kNumLitStates ? 8 : 11;
+ prob = p + RepLenCoder;
+ }
+ {
+ int numBits, offset;
+ CProb *probLen = prob + LenChoice;
+ IfBit0(probLen)
+ {
+ UpdateBit0(probLen);
+ probLen = prob + LenLow + (posState << kLenNumLowBits);
+ offset = 0;
+ numBits = kLenNumLowBits;
+ }
+ else
+ {
+ UpdateBit1(probLen);
+ probLen = prob + LenChoice2;
+ IfBit0(probLen)
+ {
+ UpdateBit0(probLen);
+ probLen = prob + LenMid + (posState << kLenNumMidBits);
+ offset = kLenNumLowSymbols;
+ numBits = kLenNumMidBits;
+ }
+ else
+ {
+ UpdateBit1(probLen);
+ probLen = prob + LenHigh;
+ offset = kLenNumLowSymbols + kLenNumMidSymbols;
+ numBits = kLenNumHighBits;
+ }
+ }
+ RangeDecoderBitTreeDecode(probLen, numBits, len);
+ len += offset;
+ }
+
+ if (state < 4)
+ {
+ int posSlot;
+ state += kNumLitStates;
+ prob = p + PosSlot +
+ ((len < kNumLenToPosStates ? len : kNumLenToPosStates - 1) <<
+ kNumPosSlotBits);
+ RangeDecoderBitTreeDecode(prob, kNumPosSlotBits, posSlot);
+ if (posSlot >= kStartPosModelIndex)
+ {
+ int numDirectBits = ((posSlot >> 1) - 1);
+ rep0 = (2 | ((UInt32)posSlot & 1));
+ if (posSlot < kEndPosModelIndex)
+ {
+ rep0 <<= numDirectBits;
+ prob = p + SpecPos + rep0 - posSlot - 1;
+ }
+ else
+ {
+ numDirectBits -= kNumAlignBits;
+ do
+ {
+ RC_NORMALIZE
+ Range >>= 1;
+ rep0 <<= 1;
+ if (Code >= Range)
+ {
+ Code -= Range;
+ rep0 |= 1;
+ }
+ }
+ while (--numDirectBits != 0);
+ prob = p + Align;
+ rep0 <<= kNumAlignBits;
+ numDirectBits = kNumAlignBits;
+ }
+ {
+ int i = 1;
+ int mi = 1;
+ do
+ {
+ CProb *prob3 = prob + mi;
+ RC_GET_BIT2(prob3, mi, ; , rep0 |= i);
+ i <<= 1;
+ }
+ while(--numDirectBits != 0);
+ }
+ }
+ else
+ rep0 = posSlot;
+ if (++rep0 == (UInt32)(0))
+ {
+ /* it's for stream version */
+ len = kLzmaStreamWasFinishedId;
+ break;
+ }
+ }
+
+ len += kMatchMinLen;
+ #ifdef _LZMA_OUT_READ
+ if (rep0 > distanceLimit)
+ #else
+ if (rep0 > nowPos)
+ #endif
+ return LZMA_RESULT_DATA_ERROR;
+
+ #ifdef _LZMA_OUT_READ
+ if (dictionarySize - distanceLimit > (UInt32)len)
+ distanceLimit += len;
+ else
+ distanceLimit = dictionarySize;
+ #endif
+
+ do
+ {
+ #ifdef _LZMA_OUT_READ
+ UInt32 pos = dictionaryPos - rep0;
+ if (pos >= dictionarySize)
+ pos += dictionarySize;
+ previousByte = dictionary[pos];
+ dictionary[dictionaryPos] = previousByte;
+ if (++dictionaryPos == dictionarySize)
+ dictionaryPos = 0;
+ #else
+ previousByte = outStream[nowPos - rep0];
+ #endif
+ len--;
+ outStream[nowPos++] = previousByte;
+ }
+ while(len != 0 && nowPos < outSize);
+ }
+ }
+ RC_NORMALIZE;
+
+ #ifdef _LZMA_OUT_READ
+ vs->Range = Range;
+ vs->Code = Code;
+ vs->DictionaryPos = dictionaryPos;
+ vs->GlobalPos = globalPos + (UInt32)nowPos;
+ vs->DistanceLimit = distanceLimit;
+ vs->Reps[0] = rep0;
+ vs->Reps[1] = rep1;
+ vs->Reps[2] = rep2;
+ vs->Reps[3] = rep3;
+ vs->State = state;
+ vs->RemainLen = len;
+ vs->TempDictionary[0] = tempDictionary[0];
+ #endif
+
+ #ifdef _LZMA_IN_CB
+ vs->Buffer = Buffer;
+ vs->BufferLim = BufferLim;
+ #else
+ *inSizeProcessed = (SizeT)(Buffer - inStream);
+ #endif
+ *outSizeProcessed = nowPos;
+ return LZMA_RESULT_OK;
+}
diff --git a/target/linux/adm5120/image/lzma-loader/src/LzmaDecode.h b/target/linux/adm5120/image/lzma-loader/src/LzmaDecode.h
new file mode 100644
index 0000000..2870eeb
--- /dev/null
+++ b/target/linux/adm5120/image/lzma-loader/src/LzmaDecode.h
@@ -0,0 +1,113 @@
+/*
+ LzmaDecode.h
+ LZMA Decoder interface
+
+ LZMA SDK 4.40 Copyright (c) 1999-2006 Igor Pavlov (2006-05-01)
+ http://www.7-zip.org/
+
+ LZMA SDK is licensed under two licenses:
+ 1) GNU Lesser General Public License (GNU LGPL)
+ 2) Common Public License (CPL)
+ It means that you can select one of these two licenses and
+ follow rules of that license.
+
+ SPECIAL EXCEPTION:
+ Igor Pavlov, as the author of this code, expressly permits you to
+ statically or dynamically link your code (or bind by name) to the
+ interfaces of this file without subjecting your linked code to the
+ terms of the CPL or GNU LGPL. Any modifications or additions
+ to this file, however, are subject to the LGPL or CPL terms.
+*/
+
+#ifndef __LZMADECODE_H
+#define __LZMADECODE_H
+
+#include "LzmaTypes.h"
+
+/* #define _LZMA_IN_CB */
+/* Use callback for input data */
+
+/* #define _LZMA_OUT_READ */
+/* Use read function for output data */
+
+/* #define _LZMA_PROB32 */
+/* It can increase speed on some 32-bit CPUs,
+ but memory usage will be doubled in that case */
+
+/* #define _LZMA_LOC_OPT */
+/* Enable local speed optimizations inside code */
+
+#ifdef _LZMA_PROB32
+#define CProb UInt32
+#else
+#define CProb UInt16
+#endif
+
+#define LZMA_RESULT_OK 0
+#define LZMA_RESULT_DATA_ERROR 1
+
+#ifdef _LZMA_IN_CB
+typedef struct _ILzmaInCallback
+{
+ int (*Read)(void *object, const unsigned char **buffer, SizeT *bufferSize);
+} ILzmaInCallback;
+#endif
+
+#define LZMA_BASE_SIZE 1846
+#define LZMA_LIT_SIZE 768
+
+#define LZMA_PROPERTIES_SIZE 5
+
+typedef struct _CLzmaProperties
+{
+ int lc;
+ int lp;
+ int pb;
+ #ifdef _LZMA_OUT_READ
+ UInt32 DictionarySize;
+ #endif
+}CLzmaProperties;
+
+int LzmaDecodeProperties(CLzmaProperties *propsRes, const unsigned char *propsData, int size);
+
+#define LzmaGetNumProbs(Properties) (LZMA_BASE_SIZE + (LZMA_LIT_SIZE << ((Properties)->lc + (Properties)->lp)))
+
+#define kLzmaNeedInitId (-2)
+
+typedef struct _CLzmaDecoderState
+{
+ CLzmaProperties Properties;
+ CProb *Probs;
+
+ #ifdef _LZMA_IN_CB
+ const unsigned char *Buffer;
+ const unsigned char *BufferLim;
+ #endif
+
+ #ifdef _LZMA_OUT_READ
+ unsigned char *Dictionary;
+ UInt32 Range;
+ UInt32 Code;
+ UInt32 DictionaryPos;
+ UInt32 GlobalPos;
+ UInt32 DistanceLimit;
+ UInt32 Reps[4];
+ int State;
+ int RemainLen;
+ unsigned char TempDictionary[4];
+ #endif
+} CLzmaDecoderState;
+
+#ifdef _LZMA_OUT_READ
+#define LzmaDecoderInit(vs) { (vs)->RemainLen = kLzmaNeedInitId; }
+#endif
+
+int LzmaDecode(CLzmaDecoderState *vs,
+ #ifdef _LZMA_IN_CB
+ ILzmaInCallback *inCallback,
+ #else
+ const unsigned char *inStream, SizeT inSize, SizeT *inSizeProcessed,
+ #endif
+ unsigned char *outStream, SizeT outSize, SizeT *outSizeProcessed);
+
+#endif
diff --git a/target/linux/adm5120/image/lzma-loader/src/LzmaTypes.h b/target/linux/adm5120/image/lzma-loader/src/LzmaTypes.h
new file mode 100644
index 0000000..9c27290
--- /dev/null
+++ b/target/linux/adm5120/image/lzma-loader/src/LzmaTypes.h
@@ -0,0 +1,45 @@
+/*
+LzmaTypes.h
+
+Types for LZMA Decoder
+
+This file written and distributed to public domain by Igor Pavlov.
+This file is part of LZMA SDK 4.40 (2006-05-01)
+*/
+
+#ifndef __LZMATYPES_H
+#define __LZMATYPES_H
+
+#ifndef _7ZIP_BYTE_DEFINED
+#define _7ZIP_BYTE_DEFINED
+typedef unsigned char Byte;
+#endif
+
+#ifndef _7ZIP_UINT16_DEFINED
+#define _7ZIP_UINT16_DEFINED
+typedef unsigned short UInt16;
+#endif
+
+#ifndef _7ZIP_UINT32_DEFINED
+#define _7ZIP_UINT32_DEFINED
+#ifdef _LZMA_UINT32_IS_ULONG
+typedef unsigned long UInt32;
+#else
+typedef unsigned int UInt32;
+#endif
+#endif
+
+/* #define _LZMA_NO_SYSTEM_SIZE_T */
+/* You can use it, if you don't want <stddef.h> */
+
+#ifndef _7ZIP_SIZET_DEFINED
+#define _7ZIP_SIZET_DEFINED
+#ifdef _LZMA_NO_SYSTEM_SIZE_T
+typedef UInt32 SizeT;
+#else
+#include <stddef.h>
+typedef size_t SizeT;
+#endif
+#endif
+
+#endif
diff --git a/target/linux/adm5120/image/lzma-loader/src/Makefile b/target/linux/adm5120/image/lzma-loader/src/Makefile
new file mode 100644
index 0000000..f23d040
--- /dev/null
+++ b/target/linux/adm5120/image/lzma-loader/src/Makefile
@@ -0,0 +1,99 @@
+#
+# Makefile for Broadcom BCM947XX boards
+#
+# Copyright 2001-2003, Broadcom Corporation
+# All Rights Reserved.
+#
+# THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
+# KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
+# SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
+# FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
+#
+# Copyright 2004 Manuel Novoa III <mjn3@codepoet.org>
+# Modified to support bzip'd kernels.
+# Of course, it would be better to integrate bunzip capability into CFE.
+#
+# Copyright 2005 Oleg I. Vdovikin <oleg@cs.msu.su>
+# Cleaned up, modified for lzma support, removed from kernel
+#
+# Copyright 2007 Gabor Juhos <juhosg at openwrt.org>
+# Modified to support user defined entry point address.
+# Added support for make targets with different names
+#
+
+LOADADDR := 0x80001000
+LZMA_TEXT_START := 0x80500000
+LZMA_STARTUP_ORG:= 0
+LOADER_DATA :=
+CONFIG_PASS_KARGS :=
+CONFIG_BOARD :=
+
+CC := $(CROSS_COMPILE)gcc
+LD := $(CROSS_COMPILE)ld
+OBJCOPY := $(CROSS_COMPILE)objcopy
+OBJDUMP := $(CROSS_COMPILE)objdump
+
+BIN_FLAGS := -O binary -R .reginfo -R .note -R .comment -R .mdebug -S
+
+CFLAGS = -D__KERNEL__ -Wall -Wstrict-prototypes -Wno-trigraphs -Os \
+ -fno-strict-aliasing -fno-common -fomit-frame-pointer -G 0 -mno-abicalls -fno-pic \
+ -ffunction-sections -pipe -mlong-calls -fno-common -ffreestanding \
+ -fhonour-copts \
+ -mabi=32 -march=mips32 -Wa,-32 -Wa,-march=mips32 -Wa,-mips32 -Wa,--trap
+CFLAGS += -DLOADADDR=$(LOADADDR) -D_LZMA_PROB32
+
+ASFLAGS = $(CFLAGS) -D__ASSEMBLY__ -DLZMA_STARTUP_ORG=$(LZMA_STARTUP_ORG)
+
+LDFLAGS = -static --gc-sections -no-warn-mismatch
+LDFLAGS += -e startup -T loader.lds -Ttext $(LZMA_TEXT_START)
+
+O_FORMAT = $(shell $(OBJDUMP) -i | head -2 | grep elf32)
+
+OBJECTS := head.o decompress.o board.o printf.o LzmaDecode.o
+
+ifneq ($(strip $(LOADER_DATA)),)
+OBJECTS += data.o
+CFLAGS += -DLZMA_WRAPPER=1
+else
+CFLAGS += -D_LZMA_IN_CB
+endif
+
+ifneq ($(strip $(CONFIG_PASS_KARGS)),)
+CFLAGS += -DCONFIG_PASS_KARGS
+endif
+
+BOARD_DEF := $(strip $(CONFIG_BOARD))
+BOARD_DEF := $(shell echo $(BOARD_DEF) | tr a-z A-Z | tr -d -)
+ifneq ($(BOARD_DEF),)
+CFLAGS += -DCONFIG_BOARD_$(BOARD_DEF)
+endif
+
+all: loader.bin
+
+# Don't build dependencies, this may die if $(CC) isn't gcc
+dep:
+
+install:
+
+%.o : %.c
+ $(CC) $(CFLAGS) -c -o $@ $<
+
+%.o : %.S
+ $(CC) $(ASFLAGS) -c -o $@ $<
+
+data.o: $(LOADER_DATA)
+ $(LD) -r -b binary --oformat $(O_FORMAT) -T lzma-data.lds -o $@ $<
+
+loader.bin: loader.elf
+ $(OBJCOPY) $(BIN_FLAGS) $< $@
+
+loader.elf: $(OBJECTS)
+ $(LD) $(LDFLAGS) -o $@ $(OBJECTS)
+
+mrproper: clean
+
+clean:
+ rm -f *.elf *.bin *.o
+
+
+
diff --git a/target/linux/adm5120/image/lzma-loader/src/README b/target/linux/adm5120/image/lzma-loader/src/README
new file mode 100644
index 0000000..16649e9
--- /dev/null
+++ b/target/linux/adm5120/image/lzma-loader/src/README
@@ -0,0 +1,55 @@
+/*
+ * LZMA compressed kernel decompressor for bcm947xx boards
+ *
+ * Copyright (C) 2005 by Oleg I. Vdovikin <oleg@cs.msu.su>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+The code is intended to decompress kernel, being compressed using lzma utility
+build using 7zip LZMA SDK. This utility is located in the LZMA_Alone directory
+
+decompressor code expects that your .trx file consist of three partitions:
+
+1) decompressor itself (this is gziped code which pmon/cfe will extract and run
+on boot-up instead of real kernel)
+2) LZMA compressed kernel (both streamed and regular modes are supported now)
+3) Root filesystem
+
+Please be sure to apply the following patch for use this new trx layout (it will
+allow using both new and old trx files for root filesystem lookup code)
+
+--- linuz/arch/mips/brcm-boards/bcm947xx/setup.c 2005-01-23 19:24:27.503322896 +0300
++++ linux/arch/mips/brcm-boards/bcm947xx/setup.c 2005-01-23 19:29:05.237100944 +0300
+@@ -221,7 +221,9 @@
+ /* Try looking at TRX header for rootfs offset */
+ if (le32_to_cpu(trx->magic) == TRX_MAGIC) {
+ bcm947xx_parts[1].offset = off;
+- if (le32_to_cpu(trx->offsets[1]) > off)
++ if (le32_to_cpu(trx->offsets[2]) > off)
++ off = le32_to_cpu(trx->offsets[2]);
++ else if (le32_to_cpu(trx->offsets[1]) > off)
+ off = le32_to_cpu(trx->offsets[1]);
+ continue;
+ }
+
+
+Revision history:
+ 0.02 Initial release
+ 0.03 Added Mineharu Takahara <mtakahar@yahoo.com> patch to pass actual
+ output size to decoder (stream mode compressed input is not
+ a requirement anymore)
+ 0.04 Reordered functions using lds script
diff --git a/target/linux/adm5120/image/lzma-loader/src/board.c b/target/linux/adm5120/image/lzma-loader/src/board.c
new file mode 100644
index 0000000..5ebdbc3
--- /dev/null
+++ b/target/linux/adm5120/image/lzma-loader/src/board.c
@@ -0,0 +1,185 @@
+/*
+ * ADM5120 specific board support for LZMA decompressor
+ *
+ * Copyright (C) 2007-2008 OpenWrt.org
+ * Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include "config.h"
+#include <stddef.h>
+
+#define READREG(r) *(volatile unsigned int *)(r)
+#define WRITEREG(r,v) *(volatile unsigned int *)(r) = v
+
+/*
+ * INTC definitions
+ */
+#define INTC_BASE 0xB2200000
+
+/* INTC registers */
+#define INTC_REG_IRQ_DISABLE 0x0C
+
+/*
+ * UART definitions
+ */
+#define UART0_BASE 0xB2600000
+#define UART1_BASE 0xB2800000
+/* UART registers */
+#define UART_REG_DATA 0x00 /* Data register */
+#define UART_REG_ECR 0x04 /* Error Clear register */
+#define UART_REG_LCRH 0x08 /* Line Control High register */
+#define UART_REG_LCRM 0x0C /* Line Control Middle register */
+#define UART_REG_LCRL 0x10 /* Line Control Low register */
+#define UART_REG_CTRL 0x14 /* Control register */
+#define UART_REG_FLAG 0x18 /* Flag register */
+
+/* Control register bits */
+#define UART_CTRL_EN ( 1 << 0 ) /* UART enable */
+
+/* Line Control High register bits */
+#define UART_LCRH_FEN ( 1 << 4 ) /* FIFO enable */
+
+/* Flag register bits */
+#define UART_FLAG_CTS ( 1 << 0 )
+#define UART_FLAG_DSR ( 1 << 1 )
+#define UART_FLAG_DCD ( 1 << 2 )
+#define UART_FLAG_BUSY ( 1 << 3 )
+#define UART_FLAG_RXFE ( 1 << 4 ) /* RX FIFO empty */
+#define UART_FLAG_TXFF ( 1 << 5 ) /* TX FIFO full */
+#define UART_FLAG_RXFF ( 1 << 6 ) /* RX FIFO full */
+#define UART_FLAG_TXFE ( 1 << 7 ) /* TX FIFO empty */
+
+/*
+ * SWITCH definitions
+ */
+#define SWITCH_BASE 0xB2000000
+
+#define SWITCH_REG_CPUP_CONF 0x0024
+#define SWITCH_REG_PORT_CONF0 0x0028
+
+#define SWITCH_REG_GPIO_CONF0 0x00B8
+#define SWITCH_REG_GPIO_CONF2 0x00BC
+
+#define SWITCH_REG_PORT0_LED 0x0100
+#define SWITCH_REG_PORT1_LED 0x0104
+#define SWITCH_REG_PORT2_LED 0x0108
+#define SWITCH_REG_PORT3_LED 0x010C
+#define SWITCH_REG_PORT4_LED 0x0110
+
+#define SWITCH_PORTS_HW 0x3F /* Hardware Ports */
+
+/* CPUP_CONF register bits */
+#define CPUP_CONF_DCPUP ( 1 << 0 ) /* Disable CPU port */
+
+/* PORT_CONF0 register bits */
+#define PORT_CONF0_DP_SHIFT 0 /* disable port shift*/
+
+
+/*
+ * UART routines
+ */
+
+#if defined(CONFIG_USE_UART0)
+# define UART_READ(r) READREG(UART0_BASE+(r))
+# define UART_WRITE(r,v) WRITEREG(UART0_BASE+(r),(v))
+#else
+# define UART_READ(r) READREG(UART1_BASE+(r))
+# define UART_WRITE(r,v) WRITEREG(UART1_BASE+(r),(v))
+#endif
+
+static void uart_init(void)
+{
+#if 0
+ unsigned int t;
+
+ /* disable uart */
+ UART_WRITE(UART_REG_CTRL, 0);
+
+ /* keep current baud rate */
+ t = UART_READ(UART_REG_LCRM);
+ UART_WRITE(UART_REG_LCRM, t);
+ t = UART_READ(UART_REG_LCRL);
+ UART_WRITE(UART_REG_LCRL, t);
+
+ /* keep data, stop, and parity bits, but disable FIFO */
+ t = UART_READ(UART_REG_LCRH);
+ t &= ~(UART_LCRH_FEN);
+ UART_WRITE(UART_REG_LCRH, t );
+
+ /* clear error bits */
+ UART_WRITE(UART_REG_ECR, 0xFF);
+
+ /* enable uart, and disable interrupts */
+ UART_WRITE(UART_REG_CTRL, UART_CTRL_EN);
+#endif
+}
+
+/*
+ * INTC routines
+ */
+
+#define INTC_READ(r) READREG(INTC_BASE+(r))
+#define INTC_WRITE(r,v) WRITEREG(INTC_BASE+(r),v)
+
+static void intc_init(void)
+{
+ INTC_WRITE(INTC_REG_IRQ_DISABLE, 0xFFFFFFFF);
+}
+
+/*
+ * SWITCH routines
+ */
+
+#define SWITCH_READ(r) READREG(SWITCH_BASE+(r))
+#define SWITCH_WRITE(r,v) WRITEREG(SWITCH_BASE+(r),v)
+
+static void switch_init(void)
+{
+ /* disable PHYS ports */
+ SWITCH_WRITE(SWITCH_REG_PORT_CONF0,
+ (SWITCH_PORTS_HW << PORT_CONF0_DP_SHIFT));
+
+ /* disable CPU port */
+ SWITCH_WRITE(SWITCH_REG_CPUP_CONF, CPUP_CONF_DCPUP);
+
+ /* disable GPIO lines */
+ SWITCH_WRITE(SWITCH_REG_GPIO_CONF0, 0);
+ SWITCH_WRITE(SWITCH_REG_GPIO_CONF2, 0);
+
+ /* disable LED lines */
+ SWITCH_WRITE(SWITCH_REG_PORT0_LED, 0);
+ SWITCH_WRITE(SWITCH_REG_PORT1_LED, 0);
+ SWITCH_WRITE(SWITCH_REG_PORT2_LED, 0);
+ SWITCH_WRITE(SWITCH_REG_PORT3_LED, 0);
+ SWITCH_WRITE(SWITCH_REG_PORT4_LED, 0);
+}
+
+void board_putc(int ch)
+{
+ while ((UART_READ(UART_REG_FLAG) & UART_FLAG_TXFE) == 0);
+
+ UART_WRITE(UART_REG_DATA, ch);
+
+ while ((UART_READ(UART_REG_FLAG) & UART_FLAG_TXFE) == 0);
+}
+
+void board_init(void)
+{
+ intc_init();
+ switch_init();
+ uart_init();
+}
diff --git a/target/linux/adm5120/image/lzma-loader/src/config.h b/target/linux/adm5120/image/lzma-loader/src/config.h
new file mode 100644
index 0000000..e5511d1
--- /dev/null
+++ b/target/linux/adm5120/image/lzma-loader/src/config.h
@@ -0,0 +1,143 @@
+#ifndef _CONFIG_H_
+#define _CONFIG_H_
+
+#define FLASH_2M (2<<20)
+#define FLASH_4M (4<<20)
+
+/*
+ * Cellvision/SparkLAN boards
+ */
+
+#if defined(CONFIG_BOARD_CAS630)
+# define CONFIG_BOARD_NAME "CAS-630"
+# define CONFIG_FLASH_SIZE FLASH_4M
+#endif
+
+#if defined(CONFIG_BOARD_CAS670)
+# define CONFIG_BOARD_NAME "CAS-670"
+# define CONFIG_FLASH_SIZE FLASH_4M
+#endif
+
+#if defined(CONFIG_BOARD_CAS700)
+# define CONFIG_BOARD_NAME "CAS-700"
+# define CONFIG_FLASH_SIZE FLASH_4M
+#endif
+
+#if defined(CONFIG_BOARD_CAS790)
+# define CONFIG_BOARD_NAME "CAS-790"
+# define CONFIG_FLASH_SIZE FLASH_4M
+#endif
+
+#if defined(CONFIG_BOARD_CAS771)
+# define CONFIG_BOARD_NAME "CAS-771"
+# define CONFIG_FLASH_SIZE FLASH_4M
+#endif
+
+#if defined(CONFIG_BOARD_CAS861)
+# define CONFIG_BOARD_NAME "CAS-861"
+# define CONFIG_FLASH_SIZE FLASH_4M
+#endif
+
+#if defined(CONFIG_BOARD_NFS101U)
+# define CONFIG_BOARD_NAME "NFS-101U"
+# define CONFIG_FLASH_SIZE FLASH_4M
+#endif
+
+#if defined(CONFIG_BOARD_NFS202U)
+# define CONFIG_BOARD_NAME "NFS-202U"
+# define CONFIG_FLASH_SIZE FLASH_4M
+#endif
+
+/*
+ * Compex boards
+ */
+#if defined(CONFIG_BOARD_WP54GWRT)
+# define CONFIG_BOARD_NAME "WP54G-WRT"
+# define CONFIG_FLASH_SIZE FLASH_4M
+#endif
+
+/*
+ * Edimax boards
+ */
+#if defined(CONFIG_BOARD_BR6104K)
+# define CONFIG_BOARD_NAME "BR-6104K"
+# define CONFIG_FLASH_SIZE FLASH_2M
+#endif
+
+#if defined(CONFIG_BOARD_BR6104KP)
+# define CONFIG_BOARD_NAME "BR-6104KP"
+# define CONFIG_FLASH_SIZE FLASH_2M
+#endif
+
+#if defined(CONFIG_BOARD_BR6104WG)
+# define CONFIG_BOARD_NAME "BR-6104WG"
+# define CONFIG_FLASH_SIZE FLASH_2M
+#endif
+
+/*
+ * Infineon boards
+ */
+#if defined(CONFIG_BOARD_EASY5120PATA)
+# define CONFIG_BOARD_NAME "EASY 5120P-ATA"
+# define CONFIG_FLASH_SIZE FLASH_4M
+#endif
+
+#if defined(CONFIG_BOARD_EASY5120RT)
+# define CONFIG_BOARD_NAME "EASY 5120-RT"
+# define CONFIG_FLASH_SIZE FLASH_4M
+#endif
+
+#if defined(CONFIG_BOARD_EASY5120WVOIP)
+# define CONFIG_BOARD_NAME "EASY 5120-WVOIP"
+# define CONFIG_FLASH_SIZE FLASH_4M
+#endif
+
+#if defined(CONFIG_BOARD_EASY83000)
+# define CONFIG_BOARD_NAME "EASY 83000"
+# define CONFIG_FLASH_SIZE FLASH_4M
+#endif
+
+/*
+ * Motorola boards
+ */
+#if defined(CONFIG_BOARD_POWERLINEMUGW)
+# define CONFIG_BOARD_NAME "Powerline MU Gateway"
+# define CONFIG_USE_UART1 1
+#endif
+
+/*
+ * OSBRiDGE boards
+ */
+#if defined(CONFIG_BOARD_5GXI)
+# define CONFIG_BOARD_NAME "OSBRiDGE 5GXi"
+#endif
+
+/*
+ * ZyXEL boards
+ */
+#if defined(CONFIG_BOARD_P334WT)
+# define CONFIG_BOARD_NAME "P-334WT"
+# define CONFIG_FLASH_SIZE FLASH_4M
+#endif
+
+#if defined(CONFIG_BOARD_P335)
+# define CONFIG_BOARD_NAME "P-335"
+# define CONFIG_FLASH_SIZE FLASH_4M
+#endif
+
+/*
+ * Default values
+ */
+#ifndef CONFIG_BOARD_NAME
+# define CONFIG_BOARD_NAME "ADM5120"
+#endif
+
+#ifndef CONFIG_FLASH_SIZE
+# define CONFIG_FLASH_SIZE FLASH_2M
+#endif
+
+#if !defined(CONFIG_USE_UART0) && !defined(CONFIG_USE_UART1)
+# define CONFIG_USE_UART0
+#endif
+
+#endif /* _CONFIG_H_ */
diff --git a/target/linux/adm5120/image/lzma-loader/src/decompress.c b/target/linux/adm5120/image/lzma-loader/src/decompress.c
new file mode 100644
index 0000000..cd4b8fa
--- /dev/null
+++ b/target/linux/adm5120/image/lzma-loader/src/decompress.c
@@ -0,0 +1,353 @@
+/*
+ *
+ * LZMA compressed kernel decompressor for ADM5120 boards
+ *
+ * Copyright (C) 2005 by Oleg I. Vdovikin <oleg@cs.msu.su>
+ * Copyright (C) 2007-2008 OpenWrt.org
+ * Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ *
+ * Please note, this was code based on the bunzip2 decompressor code
+ * by Manuel Novoa III (mjn3@codepoet.org), although the only thing left
+ * is an idea and part of original vendor code
+ *
+ *
+ * 12-Mar-2005 Mineharu Takahara <mtakahar@yahoo.com>
+ * pass actual output size to decoder (stream mode
+ * compressed input is not a requirement anymore)
+ *
+ * 24-Apr-2005 Oleg I. Vdovikin
+ * reordered functions using lds script, removed forward decl
+ *
+ * 24-Mar-2007 Gabor Juhos
+ * pass original values of the a0,a1,a2,a3 registers to the kernel
+ *
+ * 19-May-2007 Gabor Juhos
+ * endiannes related cleanups
+ * add support for decompressing an embedded kernel
+ *
+ */
+
+#include <stddef.h>
+
+#include "config.h"
+#include "printf.h"
+#include "LzmaDecode.h"
+
+#define ADM5120_FLASH_START 0x1fc00000 /* Flash start */
+#define ADM5120_FLASH_END 0x1fe00000 /* Flash end */
+
+#define KSEG0 0x80000000
+#define KSEG1 0xa0000000
+
+#define KSEG1ADDR(a) ((((unsigned)(a)) & 0x1fffffffU) | KSEG1)
+
+#define Index_Invalidate_I 0x00
+#define Index_Writeback_Inv_D 0x01
+
+#define cache_unroll(base,op) \
+ __asm__ __volatile__( \
+ ".set noreorder;\n" \
+ ".set mips3;\n" \
+ "cache %1, (%0);\n" \
+ ".set mips0;\n" \
+ ".set reorder\n" \
+ : \
+ : "r" (base), \
+ "i" (op));
+
+#ifdef LZMA_DEBUG
+# define DBG(f, a...) printf(f, ## a)
+#else
+# define DBG(f, a...) do {} while (0)
+#endif
+
+static __inline__ void blast_icache(unsigned long size, unsigned long lsize)
+{
+ unsigned long start = KSEG0;
+ unsigned long end = (start + size);
+
+ while(start < end) {
+ cache_unroll(start,Index_Invalidate_I);
+ start += lsize;
+ }
+}
+
+static __inline__ void blast_dcache(unsigned long size, unsigned long lsize)
+{
+ unsigned long start = KSEG0;
+ unsigned long end = (start + size);
+
+ while(start < end) {
+ cache_unroll(start,Index_Writeback_Inv_D);
+ start += lsize;
+ }
+}
+
+#define TRX_MAGIC 0x30524448 /* "HDR0" */
+#define TRX_ALIGN 0x1000
+
+struct trx_header {
+ unsigned int magic; /* "HDR0" */
+ unsigned int len; /* Length of file including header */
+ unsigned int crc32; /* 32-bit CRC from flag_version to end of file */
+ unsigned int flag_version; /* 0:15 flags, 16:31 version */
+ unsigned int offsets[3]; /* Offsets of partitions from start of header */
+};
+
+struct env_var {
+ char *name;
+ char *value;
+};
+
+/* beyound the image end, size not known in advance */
+extern unsigned char workspace[];
+extern void board_init(void);
+
+static CLzmaDecoderState lzma_state;
+
+typedef void (*kernel_entry)(unsigned long reg_a0, unsigned long reg_a1,
+ unsigned long reg_a2, unsigned long reg_a3);
+
+static int decompress_data(CLzmaDecoderState *vs, unsigned char *outStream,
+ UInt32 outSize);
+
+#ifdef CONFIG_PASS_KARGS
+#define ENVV(n,v) {.name = (n), .value = (v)}
+struct env_var env_vars[] = {
+ ENVV("board_name", CONFIG_BOARD_NAME),
+ ENVV(NULL, NULL)
+};
+#endif
+
+static void halt(void)
+{
+ printf("\nSystem halted!\n");
+ for(;;);
+}
+
+#if (LZMA_WRAPPER)
+extern unsigned char _lzma_data_start[];
+extern unsigned char _lzma_data_end[];
+
+unsigned char *data;
+unsigned long datalen;
+
+static __inline__ unsigned char get_byte(void)
+{
+ datalen--;
+ return *data++;
+}
+
+static void decompress_init(void)
+{
+ data = _lzma_data_start;
+ datalen = _lzma_data_end - _lzma_data_start;
+}
+
+static int decompress_data(CLzmaDecoderState *vs, unsigned char *outStream,
+ SizeT outSize)
+{
+ SizeT ip, op;
+
+ return LzmaDecode(vs, data, datalen, &ip, outStream, outSize, &op);
+}
+#endif /* LZMA_WRAPPER */
+
+#if !(LZMA_WRAPPER)
+
+#define FLASH_BANK_SIZE (2<<20)
+
+static unsigned char *flash_base = (unsigned char *) KSEG1ADDR(ADM5120_FLASH_START);
+static unsigned long flash_ofs = 0;
+static unsigned long flash_max = 0;
+static unsigned long flash_ofs_mask = (FLASH_BANK_SIZE-1);
+
+static __inline__ unsigned char get_byte(void)
+{
+ return *(flash_base+flash_ofs++);
+}
+
+static int lzma_read_byte(void *object, const unsigned char **buffer,
+ SizeT *bufferSize)
+{
+ unsigned long len;
+
+ if (flash_ofs >= flash_max)
+ return LZMA_RESULT_DATA_ERROR;
+
+ len = flash_max-flash_ofs;
+
+#if (CONFIG_FLASH_SIZE > FLASH_BANK_SIZE)
+ if (flash_ofs < FLASH_BANK_SIZE) {
+ /* switch to bank 0 */
+ DBG("lzma_read_byte: switch to bank 0\n");
+
+ if (len > FLASH_BANK_SIZE-flash_ofs)
+ len = FLASH_BANK_SIZE-flash_ofs;
+ } else {
+ /* switch to bank 1 */
+ DBG("lzma_read_byte: switch to bank 1\n");
+ }
+#endif
+ DBG("lzma_read_byte: ofs=%08X, len=%08X\n", flash_ofs, len);
+
+ *buffer = flash_base+(flash_ofs & flash_ofs_mask);
+ *bufferSize = len;
+ flash_ofs += len;
+
+ return LZMA_RESULT_OK;
+}
+
+static ILzmaInCallback lzma_callback = {
+ .Read = lzma_read_byte,
+};
+
+static __inline__ unsigned int read_le32(void *buf)
+{
+ unsigned char *p = buf;
+
+ return ((unsigned int)p[0] + ((unsigned int)p[1] << 8) +
+ ((unsigned int)p[2] << 16) +((unsigned int)p[3] << 24));
+}
+
+static void decompress_init(void)
+{
+ struct trx_header *hdr = NULL;
+ unsigned long kofs,klen;
+
+ printf("Looking for TRX header... ");
+ /* look for trx header, 32-bit data access */
+ for (flash_ofs = 0; flash_ofs < FLASH_BANK_SIZE; flash_ofs += TRX_ALIGN) {
+ if (read_le32(&flash_base[flash_ofs]) == TRX_MAGIC) {
+ hdr = (struct trx_header *)&flash_base[flash_ofs];
+ break;
+ }
+ }
+
+ if (hdr == NULL) {
+ printf("not found!\n");
+ /* no compressed kernel found, halting */
+ halt();
+ }
+
+ /* compressed kernel is in the partition 0 or 1 */
+ kofs = read_le32(&hdr->offsets[1]);
+ if (kofs == 0 || kofs > 65536) {
+ klen = kofs-read_le32(&hdr->offsets[0]);
+ kofs = read_le32(&hdr->offsets[0]);
+ } else {
+ klen = read_le32(&hdr->offsets[2]);
+ if (klen > kofs)
+ klen -= kofs;
+ else
+ klen = read_le32(&hdr->len)-kofs;
+ }
+
+ printf("found at %08X, kernel:%08X len:%08X\n", flash_ofs,
+ kofs, klen);
+
+ flash_ofs += kofs;
+ flash_max = flash_ofs+klen;
+}
+
+static int decompress_data(CLzmaDecoderState *vs, unsigned char *outStream,
+ SizeT outSize)
+{
+ SizeT op;
+
+#if 0
+ vs->Buffer = data;
+ vs->BufferLim = datalen;
+#endif
+
+ return LzmaDecode(vs, &lzma_callback, outStream, outSize, &op);
+}
+#endif /* !(LZMA_WRAPPER) */
+
+/* should be the first function */
+void decompress_entry(unsigned long reg_a0, unsigned long reg_a1,
+ unsigned long reg_a2, unsigned long reg_a3,
+ unsigned long icache_size, unsigned long icache_lsize,
+ unsigned long dcache_size, unsigned long dcache_lsize)
+{
+ unsigned char props[LZMA_PROPERTIES_SIZE];
+ unsigned int i; /* temp value */
+ SizeT osize; /* uncompressed size */
+ int res;
+
+ board_init();
+
+ printf("\n\nLZMA loader for " CONFIG_BOARD_NAME
+ ", Copyright (C) 2007-2008 OpenWrt.org\n\n");
+
+ decompress_init();
+
+ /* lzma args */
+ for (i = 0; i < LZMA_PROPERTIES_SIZE; i++)
+ props[i] = get_byte();
+
+ /* skip rest of the LZMA coder property */
+ /* read the lower half of uncompressed size in the header */
+ osize = ((SizeT)get_byte()) +
+ ((SizeT)get_byte() << 8) +
+ ((SizeT)get_byte() << 16) +
+ ((SizeT)get_byte() << 24);
+
+ /* skip rest of the header (upper half of uncompressed size) */
+ for (i = 0; i < 4; i++)
+ get_byte();
+
+ res = LzmaDecodeProperties(&lzma_state.Properties, props,
+ LZMA_PROPERTIES_SIZE);
+ if (res != LZMA_RESULT_OK) {
+ printf("Incorrect LZMA stream properties!\n");
+ halt();
+ }
+
+ printf("decompressing kernel... ");
+
+ lzma_state.Probs = (CProb *)workspace;
+ res = decompress_data(&lzma_state, (unsigned char *)LOADADDR, osize);
+
+ if (res != LZMA_RESULT_OK) {
+ printf("failed, ");
+ switch (res) {
+ case LZMA_RESULT_DATA_ERROR:
+ printf("data error!\n");
+ break;
+ default:
+ printf("unknown error %d!\n", res);
+ }
+ halt();
+ } else
+ printf("done!\n");
+
+ blast_dcache(dcache_size, dcache_lsize);
+ blast_icache(icache_size, icache_lsize);
+
+ printf("launching kernel...\n\n");
+
+#ifdef CONFIG_PASS_KARGS
+ reg_a0 = 0;
+ reg_a1 = 0;
+ reg_a2 = (unsigned long)env_vars;
+ reg_a3 = 0;
+#endif
+ /* Jump to load address */
+ ((kernel_entry) LOADADDR)(reg_a0, reg_a1, reg_a2, reg_a3);
+}
diff --git a/target/linux/adm5120/image/lzma-loader/src/head.S b/target/linux/adm5120/image/lzma-loader/src/head.S
new file mode 100644
index 0000000..ee8b320
--- /dev/null
+++ b/target/linux/adm5120/image/lzma-loader/src/head.S
@@ -0,0 +1,209 @@
+/* Copyright 2007 Gabor Juhos <juhosg@freemail.hu> */
+/* keep original values of the a0,a1,a2,a3 registers */
+/* modifed to support user defined entry point address */
+/* Copyright 2005 Oleg I. Vdovikin (oleg@cs.msu.su) */
+/* cache manipulation adapted from Broadcom code */
+/* idea taken from original bunzip2 decompressor code */
+/* Copyright 2004 Manuel Novoa III (mjn3@codepoet.org) */
+/* Licensed under the linux kernel's version of the GPL.*/
+
+#include <asm/asm.h>
+#include <asm/regdef.h>
+
+#define KSEG0 0x80000000
+
+#define C0_STATUS $12
+#define C0_CAUSE $13
+#define C0_CONFIG $16
+#define C0_WATCHLO $18
+#define C0_WATCHHI $19
+#define C0_TAGLO $28
+#define C0_TAGHI $29
+
+#define CONF1_DA_SHIFT 7 /* D$ associativity */
+#define CONF1_DA_MASK 0x00000380
+#define CONF1_DA_BASE 1
+#define CONF1_DL_SHIFT 10 /* D$ line size */
+#define CONF1_DL_MASK 0x00001c00
+#define CONF1_DL_BASE 2
+#define CONF1_DS_SHIFT 13 /* D$ sets/way */
+#define CONF1_DS_MASK 0x0000e000
+#define CONF1_DS_BASE 64
+#define CONF1_IA_SHIFT 16 /* I$ associativity */
+#define CONF1_IA_MASK 0x00070000
+#define CONF1_IA_BASE 1
+#define CONF1_IL_SHIFT 19 /* I$ line size */
+#define CONF1_IL_MASK 0x00380000
+#define CONF1_IL_BASE 2
+#define CONF1_IS_SHIFT 22 /* Instruction cache sets/way */
+#define CONF1_IS_MASK 0x01c00000
+#define CONF1_IS_BASE 64
+
+#define Index_Invalidate_I 0x00
+#define Index_Writeback_Inv_D 0x01
+
+ .text
+
+#if (LZMA_STARTUP_ORG)
+ .set noreorder
+
+ b startup
+ nop
+
+ .org LZMA_STARTUP_ORG
+#endif
+
+LEAF(startup)
+ .set noreorder
+ .set mips32
+
+ mtc0 zero, C0_WATCHLO # clear watch registers
+ mtc0 zero, C0_WATCHHI
+
+ mtc0 zero, C0_CAUSE # clear before writing status register
+
+ mfc0 t0, C0_STATUS # get status register
+ li t1, ~(0xFF01)
+ and t0, t1 # mask interrupts
+ mtc0 t0, C0_STATUS # set up status register
+
+ move t1, ra # save return address
+ la t0, __reloc_label # get linked address of label
+ bal __reloc_label # branch and link to label to
+ nop # get actual address
+__reloc_label:
+ subu t0, ra, t0 # get reloc_delta
+ move ra, t1 # restore return address
+
+ beqz t0, __reloc_end # if delta is 0 we are in the right place
+ nop
+
+ /* Copy our code to the right place */
+ la t1, _code_start # get linked address of _code_start
+ la t2, _code_end # get linked address of _code_end
+ addu t0, t0, t1 # calculate actual address of _code_start
+
+__reloc_copy:
+ lw t3, 0(t0)
+ sw t3, 0(t1)
+ add t1, 4
+ blt t1, t2, __reloc_copy
+ add t0, 4
+
+__reloc_end:
+
+ /* At this point we need to invalidate dcache and */
+ /* icache before jumping to new code */
+
+1: /* Get cache sizes */
+ .set mips32
+ mfc0 s0,C0_CONFIG,1
+ .set mips0
+
+ li s1,CONF1_DL_MASK
+ and s1,s0
+ beq s1,zero,nodc
+ nop
+
+ srl s1,CONF1_DL_SHIFT
+ li t0,CONF1_DL_BASE
+ sll s1,t0,s1 /* s1 has D$ cache line size */
+
+ li s2,CONF1_DA_MASK
+ and s2,s0
+ srl s2,CONF1_DA_SHIFT
+ addiu s2,CONF1_DA_BASE /* s2 now has D$ associativity */
+
+ li t0,CONF1_DS_MASK
+ and t0,s0
+ srl t0,CONF1_DS_SHIFT
+ li s3,CONF1_DS_BASE
+ sll s3,s3,t0 /* s3 has D$ sets per way */
+
+ multu s2,s3 /* sets/way * associativity */
+ mflo t0 /* total cache lines */
+
+ multu s1,t0 /* D$ linesize * lines */
+ mflo s2 /* s2 is now D$ size in bytes */
+
+ /* Initilize the D$: */
+ mtc0 zero,C0_TAGLO
+ mtc0 zero,C0_TAGHI
+
+ li t0,KSEG0 /* Just an address for the first $ line */
+ addu t1,t0,s2 /* + size of cache == end */
+
+ .set mips3
+1: cache Index_Writeback_Inv_D,0(t0)
+ .set mips0
+ bne t0,t1,1b
+ addu t0,s1
+
+nodc:
+ /* Now we get to do it all again for the I$ */
+
+ move s3,zero /* just in case there is no icache */
+ move s4,zero
+
+ li t0,CONF1_IL_MASK
+ and t0,s0
+ beq t0,zero,noic
+ nop
+
+ srl t0,CONF1_IL_SHIFT
+ li s3,CONF1_IL_BASE
+ sll s3,t0 /* s3 has I$ cache line size */
+
+ li t0,CONF1_IA_MASK
+ and t0,s0
+ srl t0,CONF1_IA_SHIFT
+ addiu s4,t0,CONF1_IA_BASE /* s4 now has I$ associativity */
+
+ li t0,CONF1_IS_MASK
+ and t0,s0
+ srl t0,CONF1_IS_SHIFT
+ li s5,CONF1_IS_BASE
+ sll s5,t0 /* s5 has I$ sets per way */
+
+ multu s4,s5 /* sets/way * associativity */
+ mflo t0 /* s4 is now total cache lines */
+
+ multu s3,t0 /* I$ linesize * lines */
+ mflo s4 /* s4 is cache size in bytes */
+
+ /* Initilize the I$: */
+ mtc0 zero,C0_TAGLO
+ mtc0 zero,C0_TAGHI
+
+ li t0,KSEG0 /* Just an address for the first $ line */
+ addu t1,t0,s4 /* + size of cache == end */
+
+ .set mips3
+1: cache Index_Invalidate_I,0(t0)
+ .set mips0
+ bne t0,t1,1b
+ addu t0,s3
+
+noic:
+ /* Setup new "C" stack */
+ la sp, _stack
+
+ addiu sp, -32 /* reserve stack for parameters */
+#if 0
+ sw a0, 0(sp)
+ sw a1, 4(sp)
+ sw a2, 8(sp)
+ sw a3, 12(sp)
+#endif
+ sw s3, 16(sp) /* icache line size */
+ sw s4, 20(sp) /* icache size */
+ sw s1, 24(sp) /* dcache line size */
+ sw s2, 28(sp) /* dcache size */
+
+ /* jump to the decompressor routine */
+ la t0, decompress_entry
+ jr t0
+ nop
+
+ .set reorder
+END(startup)
diff --git a/target/linux/adm5120/image/lzma-loader/src/loader.lds b/target/linux/adm5120/image/lzma-loader/src/loader.lds
new file mode 100644
index 0000000..bae70fb
--- /dev/null
+++ b/target/linux/adm5120/image/lzma-loader/src/loader.lds
@@ -0,0 +1,29 @@
+OUTPUT_ARCH(mips)
+SECTIONS {
+ .text : {
+ _code_start = .;
+ *(.text)
+ *(.text.*)
+ *(.rodata)
+ *(.rodata.*)
+ . = ALIGN(16);
+ *(.data.lzma)
+ }
+
+ .data : {
+ *(.data)
+ *(.data.*)
+ }
+ _code_end = .;
+
+ .bss : {
+ *(.bss)
+ *(.bss.*)
+ }
+
+ . = ALIGN(16);
+ . = . + 8192;
+ _stack = .;
+
+ workspace = .;
+}
diff --git a/target/linux/adm5120/image/lzma-loader/src/lzma-data.lds b/target/linux/adm5120/image/lzma-loader/src/lzma-data.lds
new file mode 100644
index 0000000..abf756b
--- /dev/null
+++ b/target/linux/adm5120/image/lzma-loader/src/lzma-data.lds
@@ -0,0 +1,8 @@
+OUTPUT_ARCH(mips)
+SECTIONS {
+ .data.lzma : {
+ _lzma_data_start = .;
+ *(.data)
+ _lzma_data_end = .;
+ }
+}
diff --git a/target/linux/adm5120/image/lzma-loader/src/printf.c b/target/linux/adm5120/image/lzma-loader/src/printf.c
new file mode 100644
index 0000000..7bb5a86
--- /dev/null
+++ b/target/linux/adm5120/image/lzma-loader/src/printf.c
@@ -0,0 +1,350 @@
+/*
+ * Copyright (C) 2001 MontaVista Software Inc.
+ * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ */
+
+#include "printf.h"
+
+extern void board_putc(int ch);
+
+/* this is the maximum width for a variable */
+#define LP_MAX_BUF 256
+
+/* macros */
+#define IsDigit(x) ( ((x) >= '0') && ((x) <= '9') )
+#define Ctod(x) ( (x) - '0')
+
+/* forward declaration */
+static int PrintChar(char *, char, int, int);
+static int PrintString(char *, char *, int, int);
+static int PrintNum(char *, unsigned long, int, int, int, int, char, int);
+
+/* private variable */
+static const char theFatalMsg[] = "fatal error in lp_Print!";
+
+/* -*-
+ * A low level printf() function.
+ */
+static void
+lp_Print(void (*output)(void *, char *, int),
+ void * arg,
+ char *fmt,
+ va_list ap)
+{
+
+#define OUTPUT(arg, s, l) \
+ { if (((l) < 0) || ((l) > LP_MAX_BUF)) { \
+ (*output)(arg, (char*)theFatalMsg, sizeof(theFatalMsg)-1); for(;;); \
+ } else { \
+ (*output)(arg, s, l); \
+ } \
+ }
+
+ char buf[LP_MAX_BUF];
+
+ char c;
+ char *s;
+ long int num;
+
+ int longFlag;
+ int negFlag;
+ int width;
+ int prec;
+ int ladjust;
+ char padc;
+
+ int length;
+
+ for(;;) {
+ {
+ /* scan for the next '%' */
+ char *fmtStart = fmt;
+ while ( (*fmt != '\0') && (*fmt != '%')) {
+ fmt ++;
+ }
+
+ /* flush the string found so far */
+ OUTPUT(arg, fmtStart, fmt-fmtStart);
+
+ /* are we hitting the end? */
+ if (*fmt == '\0') break;
+ }
+
+ /* we found a '%' */
+ fmt ++;
+
+ /* check for long */
+ if (*fmt == 'l') {
+ longFlag = 1;
+ fmt ++;
+ } else {
+ longFlag = 0;
+ }
+
+ /* check for other prefixes */
+ width = 0;
+ prec = -1;
+ ladjust = 0;
+ padc = ' ';
+
+ if (*fmt == '-') {
+ ladjust = 1;
+ fmt ++;
+ }
+
+ if (*fmt == '0') {
+ padc = '0';
+ fmt++;
+ }
+
+ if (IsDigit(*fmt)) {
+ while (IsDigit(*fmt)) {
+ width = 10 * width + Ctod(*fmt++);
+ }
+ }
+
+ if (*fmt == '.') {
+ fmt ++;
+ if (IsDigit(*fmt)) {
+ prec = 0;
+ while (IsDigit(*fmt)) {
+ prec = prec*10 + Ctod(*fmt++);
+ }
+ }
+ }
+
+
+ /* check format flag */
+ negFlag = 0;
+ switch (*fmt) {
+ case 'b':
+ if (longFlag) {
+ num = va_arg(ap, long int);
+ } else {
+ num = va_arg(ap, int);
+ }
+ length = PrintNum(buf, num, 2, 0, width, ladjust, padc, 0);
+ OUTPUT(arg, buf, length);
+ break;
+
+ case 'd':
+ case 'D':
+ if (longFlag) {
+ num = va_arg(ap, long int);
+ } else {
+ num = va_arg(ap, int);
+ }
+ if (num < 0) {
+ num = - num;
+ negFlag = 1;
+ }
+ length = PrintNum(buf, num, 10, negFlag, width, ladjust, padc, 0);
+ OUTPUT(arg, buf, length);
+ break;
+
+ case 'o':
+ case 'O':
+ if (longFlag) {
+ num = va_arg(ap, long int);
+ } else {
+ num = va_arg(ap, int);
+ }
+ length = PrintNum(buf, num, 8, 0, width, ladjust, padc, 0);
+ OUTPUT(arg, buf, length);
+ break;
+
+ case 'u':
+ case 'U':
+ if (longFlag) {
+ num = va_arg(ap, long int);
+ } else {
+ num = va_arg(ap, int);
+ }
+ length = PrintNum(buf, num, 10, 0, width, ladjust, padc, 0);
+ OUTPUT(arg, buf, length);
+ break;
+
+ case 'x':
+ if (longFlag) {
+ num = va_arg(ap, long int);
+ } else {
+ num = va_arg(ap, int);
+ }
+ length = PrintNum(buf, num, 16, 0, width, ladjust, padc, 0);
+ OUTPUT(arg, buf, length);
+ break;
+
+ case 'X':
+ if (longFlag) {
+ num = va_arg(ap, long int);
+ } else {
+ num = va_arg(ap, int);
+ }
+ length = PrintNum(buf, num, 16, 0, width, ladjust, padc, 1);
+ OUTPUT(arg, buf, length);
+ break;
+
+ case 'c':
+ c = (char)va_arg(ap, int);
+ length = PrintChar(buf, c, width, ladjust);
+ OUTPUT(arg, buf, length);
+ break;
+
+ case 's':
+ s = (char*)va_arg(ap, char *);
+ length = PrintString(buf, s, width, ladjust);
+ OUTPUT(arg, buf, length);
+ break;
+
+ case '\0':
+ fmt --;
+ break;
+
+ default:
+ /* output this char as it is */
+ OUTPUT(arg, fmt, 1);
+ } /* switch (*fmt) */
+
+ fmt ++;
+ } /* for(;;) */
+
+ /* special termination call */
+ OUTPUT(arg, "\0", 1);
+}
+
+
+/* --------------- local help functions --------------------- */
+static int
+PrintChar(char * buf, char c, int length, int ladjust)
+{
+ int i;
+
+ if (length < 1) length = 1;
+ if (ladjust) {
+ *buf = c;
+ for (i=1; i< length; i++) buf[i] = ' ';
+ } else {
+ for (i=0; i< length-1; i++) buf[i] = ' ';
+ buf[length - 1] = c;
+ }
+ return length;
+}
+
+static int
+PrintString(char * buf, char* s, int length, int ladjust)
+{
+ int i;
+ int len=0;
+ char* s1 = s;
+ while (*s1++) len++;
+ if (length < len) length = len;
+
+ if (ladjust) {
+ for (i=0; i< len; i++) buf[i] = s[i];
+ for (i=len; i< length; i++) buf[i] = ' ';
+ } else {
+ for (i=0; i< length-len; i++) buf[i] = ' ';
+ for (i=length-len; i < length; i++) buf[i] = s[i-length+len];
+ }
+ return length;
+}
+
+static int
+PrintNum(char * buf, unsigned long u, int base, int negFlag,
+ int length, int ladjust, char padc, int upcase)
+{
+ /* algorithm :
+ * 1. prints the number from left to right in reverse form.
+ * 2. fill the remaining spaces with padc if length is longer than
+ * the actual length
+ * TRICKY : if left adjusted, no "0" padding.
+ * if negtive, insert "0" padding between "0" and number.
+ * 3. if (!ladjust) we reverse the whole string including paddings
+ * 4. otherwise we only reverse the actual string representing the num.
+ */
+
+ int actualLength =0;
+ char *p = buf;
+ int i;
+
+ do {
+ int tmp = u %base;
+ if (tmp <= 9) {
+ *p++ = '0' + tmp;
+ } else if (upcase) {
+ *p++ = 'A' + tmp - 10;
+ } else {
+ *p++ = 'a' + tmp - 10;
+ }
+ u /= base;
+ } while (u != 0);
+
+ if (negFlag) {
+ *p++ = '-';
+ }
+
+ /* figure out actual length and adjust the maximum length */
+ actualLength = p - buf;
+ if (length < actualLength) length = actualLength;
+
+ /* add padding */
+ if (ladjust) {
+ padc = ' ';
+ }
+ if (negFlag && !ladjust && (padc == '0')) {
+ for (i = actualLength-1; i< length-1; i++) buf[i] = padc;
+ buf[length -1] = '-';
+ } else {
+ for (i = actualLength; i< length; i++) buf[i] = padc;
+ }
+
+
+ /* prepare to reverse the string */
+ {
+ int begin = 0;
+ int end;
+ if (ladjust) {
+ end = actualLength - 1;
+ } else {
+ end = length -1;
+ }
+
+ while (end > begin) {
+ char tmp = buf[begin];
+ buf[begin] = buf[end];
+ buf[end] = tmp;
+ begin ++;
+ end --;
+ }
+ }
+
+ /* adjust the string pointer */
+ return length;
+}
+
+static void printf_output(void *arg, char *s, int l)
+{
+ int i;
+
+ // special termination call
+ if ((l==1) && (s[0] == '\0')) return;
+
+ for (i=0; i< l; i++) {
+ board_putc(s[i]);
+ if (s[i] == '\n') board_putc('\r');
+ }
+}
+
+void printf(char *fmt, ...)
+{
+ va_list ap;
+ va_start(ap, fmt);
+ lp_Print(printf_output, 0, fmt, ap);
+ va_end(ap);
+}
diff --git a/target/linux/adm5120/image/lzma-loader/src/printf.h b/target/linux/adm5120/image/lzma-loader/src/printf.h
new file mode 100644
index 0000000..9b1c1df
--- /dev/null
+++ b/target/linux/adm5120/image/lzma-loader/src/printf.h
@@ -0,0 +1,18 @@
+/*
+ * Copyright (C) 2001 MontaVista Software Inc.
+ * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ */
+
+#ifndef _printf_h_
+#define _printf_h_
+
+#include <stdarg.h>
+void printf(char *fmt, ...);
+
+#endif /* _printf_h_ */
generated by cgit v1.2.3 (git 2.25.1) at 2024-04-27 10:48:49 +0000