diff options
Diffstat (limited to 'cfe/cfe/include/cfe_ioctl.h')
| -rw-r--r-- | cfe/cfe/include/cfe_ioctl.h | 167 |
1 files changed, 167 insertions, 0 deletions
diff --git a/cfe/cfe/include/cfe_ioctl.h b/cfe/cfe/include/cfe_ioctl.h new file mode 100644 index 0000000..1a389f8 --- /dev/null +++ b/cfe/cfe/include/cfe_ioctl.h @@ -0,0 +1,167 @@ +/* ********************************************************************* + * Broadcom Common Firmware Environment (CFE) + * + * IOCTL definitions File: cfe_ioctl.h + * + * IOCTL function numbers and I/O data structures. + * + * Author: Mitch Lichtenberg (mpl@broadcom.com) + * + ********************************************************************* + * + * Copyright 2000,2001,2002,2003 + * Broadcom Corporation. All rights reserved. + * + * This software is furnished under license and may be used and + * copied only in accordance with the following terms and + * conditions. Subject to these conditions, you may download, + * copy, install, use, modify and distribute modified or unmodified + * copies of this software in source and/or binary form. No title + * or ownership is transferred hereby. + * + * 1) Any source code used, modified or distributed must reproduce + * and retain this copyright notice and list of conditions + * as they appear in the source file. + * + * 2) No right is granted to use any trade name, trademark, or + * logo of Broadcom Corporation. The "Broadcom Corporation" + * name may not be used to endorse or promote products derived + * from this software without the prior written permission of + * Broadcom Corporation. + * + * 3) THIS SOFTWARE IS PROVIDED "AS-IS" AND ANY EXPRESS OR + * IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED + * WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR + * PURPOSE, OR NON-INFRINGEMENT ARE DISCLAIMED. IN NO EVENT + * SHALL BROADCOM BE LIABLE FOR ANY DAMAGES WHATSOEVER, AND IN + * PARTICULAR, BROADCOM SHALL NOT BE LIABLE FOR DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE + * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR + * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY + * OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR + * TORT (INCLUDING NEGLIGENCE OR OTHERWISE), EVEN IF ADVISED OF + * THE POSSIBILITY OF SUCH DAMAGE. + ********************************************************************* */ + + +/* ********************************************************************* + * NVFAM and FLASH stuff + ********************************************************************* */ + +#define IOCTL_NVRAM_GETINFO 1 /* return nvram_info_t */ +#define IOCTL_NVRAM_ERASE 2 /* erase sector containing nvram_info_t area */ +#define IOCTL_FLASH_ERASE_SECTOR 3 /* erase an arbitrary sector */ +#define IOCTL_FLASH_ERASE_ALL 4 /* Erase the entire flash */ +#define IOCTL_FLASH_WRITE_ALL 5 /* write entire flash */ +#define IOCTL_FLASH_GETINFO 6 /* get flash device info */ +#define IOCTL_FLASH_GETSECTORS 7 /* get sector information */ +#define IOCTL_FLASH_ERASE_RANGE 8 /* erase range of bytes */ +#define IOCTL_NVRAM_UNLOCK 9 /* allow r/w beyond logical end of device */ +#define IOCTL_FLASH_PROTECT_RANGE 10 /* Protect a group of sectors */ +#define IOCTL_FLASH_UNPROTECT_RANGE 11 /* unprotect a group of sectors */ +#define IOCTL_FLASH_DATA_WIDTH_MODE 12 /* switch flash and gen bus to support 8 or 16-bit mode I/Os */ +#define IOCTL_FLASH_BURST_MODE 13 /* configure gen bus for burst mode */ + +typedef struct flash_range_s { + unsigned int range_base; + unsigned int range_length; +} flash_range_t; + +typedef struct flash_info_s { + unsigned long long flash_base; /* flash physical base address */ + unsigned int flash_size; /* available device size in bytes */ + unsigned int flash_type; /* type, from FLASH_TYPE below */ + unsigned int flash_flags; /* Various flags (FLASH_FLAG_xxx) */ +} flash_info_t; + +typedef struct flash_sector_s { + int flash_sector_idx; + int flash_sector_status; + unsigned int flash_sector_offset; + unsigned int flash_sector_size; +} flash_sector_t; + +#define FLASH_SECTOR_OK 0 +#define FLASH_SECTOR_INVALID -1 + +#define FLASH_TYPE_UNKNOWN 0 /* not sure what kind of flash */ +#define FLASH_TYPE_SRAM 1 /* not flash: it's SRAM */ +#define FLASH_TYPE_ROM 2 /* not flash: it's ROM */ +#define FLASH_TYPE_FLASH 3 /* it's flash memory of some sort */ + +#define FLASH_FLAG_NOERASE 1 /* Byte-range writes supported, + Erasing is not necessary */ + +typedef struct nvram_info_s { + int nvram_offset; /* offset of environment area */ + int nvram_size; /* size of environment area */ + int nvram_eraseflg; /* true if we need to erase first */ +} nvram_info_t; + +/* ********************************************************************* + * Ethernet stuff + ********************************************************************* */ + +#define IOCTL_ETHER_GETHWADDR 1 /* Get hardware address (6bytes) */ +#define IOCTL_ETHER_SETHWADDR 2 /* Set hardware address (6bytes) */ +#define IOCTL_ETHER_GETSPEED 3 /* Get Speed and Media (int) */ +#define IOCTL_ETHER_SETSPEED 4 /* Set Speed and Media (int) */ +#define IOCTL_ETHER_GETLINK 5 /* get link status (int) */ +#define IOCTL_ETHER_GETLOOPBACK 7 /* get loopback state */ +#define IOCTL_ETHER_SETLOOPBACK 8 /* set loopback state */ +#define IOCTL_ETHER_SETPACKETFIFO 9 /* set packet fifo mode (int) */ +#define IOCTL_ETHER_SETSTROBESIG 10 /* set strobe signal (int) */ + +#define ETHER_LOOPBACK_OFF 0 /* no loopback */ +#define ETHER_LOOPBACK_INT 1 /* Internal loopback */ +#define ETHER_LOOPBACK_EXT 2 /* External loopback (through PHY) */ + +#define ETHER_SPEED_AUTO 0 /* Auto detect */ +#define ETHER_SPEED_UNKNOWN 0 /* Speed not known (on link status) */ +#define ETHER_SPEED_10HDX 1 /* 10MB hdx and fdx */ +#define ETHER_SPEED_10FDX 2 +#define ETHER_SPEED_100HDX 3 /* 100MB hdx and fdx */ +#define ETHER_SPEED_100FDX 4 +#define ETHER_SPEED_1000HDX 5 /* 1000MB hdx and fdx */ +#define ETHER_SPEED_1000FDX 6 + +#define ETHER_FIFO_8 0 /* 8-bit packet fifo mode */ +#define ETHER_FIFO_16 1 /* 16-bit packet fifo mode */ +#define ETHER_ETHER 2 /* Standard ethernet mode */ + +#define ETHER_STROBE_GMII 0 /* GMII style strobe signal */ +#define ETHER_STROBE_ENCODED 1 /* Encoded */ +#define ETHER_STROBE_SOP 2 /* SOP flagged. Only in 8-bit mode*/ +#define ETHER_STROBE_EOP 3 /* EOP flagged. Only in 8-bit mode*/ + +/* ********************************************************************* + * Serial Ports + ********************************************************************* */ + +#define IOCTL_SERIAL_SETSPEED 1 /* get baud rate (int) */ +#define IOCTL_SERIAL_GETSPEED 2 /* set baud rate (int) */ +#define IOCTL_SERIAL_SETFLOW 3 /* Set Flow Control */ +#define IOCTL_SERIAL_GETFLOW 4 /* Get Flow Control */ + +#define SERIAL_FLOW_NONE 0 /* no flow control */ +#define SERIAL_FLOW_SOFTWARE 1 /* software flow control (not impl) */ +#define SERIAL_FLOW_HARDWARE 2 /* hardware flow control */ + +/* ********************************************************************* + * Block device stuff + ********************************************************************* */ + +#define IOCTL_BLOCK_GETBLOCKSIZE 1 /* get block size (int) */ +#define IOCTL_BLOCK_GETTOTALBLOCKS 2 /* get total bocks (long long) */ +#define IOCTL_BLOCK_GETDEVTYPE 3 /* get device type (struct) */ + +typedef struct blockdev_info_s { + unsigned long long blkdev_totalblocks; + unsigned int blkdev_blocksize; + unsigned int blkdev_devtype; +} blockdev_info_t; + +#define BLOCK_DEVTYPE_DISK 0 +#define BLOCK_DEVTYPE_CDROM 1 + |