trunk-47048

53 files changed, 4299 insertions, 0 deletions

diff --git a/target/linux/mcs814x/Makefile b/target/linux/mcs814x/Makefile
new file mode 100644
index 0000000..af1548f
--- /dev/null
+++ b/target/linux/mcs814x/Makefile
@@ -0,0 +1,31 @@
+#
+# Copyright (C) 2012 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+include $(TOPDIR)/rules.mk
+
+ARCH:=arm
+BOARD:=mcs814x
+BOARDNAME:=Moschip MCS814x
+FEATURES:=usb squashfs low_mem
+CPU_TYPE:=arm926ej-s
+MAINTAINER:=Florian Fainelli <florian@openwrt.org>
+
+KERNEL_PATCHVER:=3.18
+
+DEVICE_TYPE:=other
+
+include $(INCLUDE_DIR)/target.mk
+
+DEFAULT_PACKAGES := $(filter-out ppp%,$(DEFAULT_PACKAGES)) \
+		  kmod-usb-core kmod-usb2 kmod-usb-ohci \
+		  kmod-usb-storage kmod-fs-vfat \
+		  kmod-nls-cp437 kmod-nls-iso8859-1 kmod-nls-iso8859-15 \
+		  kmod-nls-utf8 \
+		  kmod-mcs814x-wdt kmod-ledtrig-usbdev
+
+KERNELNAME:=zImage dtbs
+
+$(eval $(call BuildTarget))
diff --git a/target/linux/mcs814x/base-files/etc/config/network b/target/linux/mcs814x/base-files/etc/config/network
new file mode 100644
index 0000000..cec7b25
--- /dev/null
+++ b/target/linux/mcs814x/base-files/etc/config/network
@@ -0,0 +1,21 @@
+# Copyright (C) 2012 OpenWrt.org
+
+config interface loopback
+	option ifname	lo
+	option proto	static
+	option ipaddr	127.0.0.1
+	option netmask	255.0.0.0
+
+config interface lan
+	option ifname	eth0
+	option proto	static
+	option ipaddr	192.168.1.1
+	option netmask	255.255.255.0
+	option ip6assign 60
+
+config interface wan6
+	option ifname   eth0
+	option proto    dhcpv6
+
+config globals globals
+	option ula_prefix auto
diff --git a/target/linux/mcs814x/base-files/etc/uci-defaults/01_leds b/target/linux/mcs814x/base-files/etc/uci-defaults/01_leds
new file mode 100644
index 0000000..0c6972d
--- /dev/null
+++ b/target/linux/mcs814x/base-files/etc/uci-defaults/01_leds
@@ -0,0 +1,26 @@
+#!/bin/sh
+#
+# Copyright (C) 2012 OpenWrt.org
+#
+
+. /lib/functions/uci-defaults.sh
+. /lib/mcs814x.sh
+
+board=$(mcs814x_board_name)
+
+case "$board" in
+dlan-usb-extender)
+	ucidef_set_led_usbdev "usb" "USB" "dlan-usb-extender:green:usb" "2-1"
+	;;
+rbt-832)
+	ucidef_set_led_usbdev "usb1" "USB1" "rbt-832:red:usb0" "1-1"
+	ucidef_set_led_usbdev "usb2" "USB2" "rbt-832:red:usb1" "1-2"
+	ucidef_set_led_usbdev "usb3" "USB3" "rbt-832:red:usb2" "1-3"
+	ucidef_set_led_usbdev "usb4" "USB4" "rbt-832:red:usb3" "1-4"
+	ucidef_set_led_netdev "eth" "eth" "rbt-832:red:ethernet" "eth0"
+	;;
+esac
+
+ucidef_commit_leds
+
+exit 0
diff --git a/target/linux/mcs814x/base-files/lib/mcs814x.sh b/target/linux/mcs814x/base-files/lib/mcs814x.sh
new file mode 100644
index 0000000..e4360fd
--- /dev/null
+++ b/target/linux/mcs814x/base-files/lib/mcs814x.sh
@@ -0,0 +1,42 @@
+#!/bin/sh
+#
+# Copyright (C) 2012 OpenWrt.org
+#
+
+MCS814X_BOARD_NAME=
+MCS814X_MODEL=
+
+mcs814x_board_detect() {
+	local machine
+	local name
+
+	machine=$(cat /proc/device-tree/model)
+
+	case "$machine" in
+	*"Devolo dLAN USB Extender")
+		name="dlan-usb-extender"
+		;;
+	*"Tigal RBT-832")
+		name="rbt-832"
+		;;
+	esac
+
+	[ -z "$name" ] && name="unknown"
+
+	[ -z "$MCS814X_BOARD_NAME" ] && MCS814X_BOARD_NAME="$name"
+	[ -z "$MCS814X_MODEL" ] && MCS814X_MODEL="$machine"
+
+	[ -e "/tmp/sysinfo/" ] || mkdir -p "/tmp/sysinfo/"
+
+	echo "$MCS814X_BOARD_NAME" > /tmp/sysinfo/board_name
+	echo "$MCS814X_MODEL" > /tmp/sysinfo/model
+}
+
+mcs814x_board_name() {
+	local name
+
+	[ -f /tmp/sysinfo/board_name ] && name=$(cat /tmp/sysinfo/board_name)
+	[ -z "$name" ] && name="unknown"
+
+	echo "$name"
+}
diff --git a/target/linux/mcs814x/base-files/lib/preinit/03_preinit_do_mcs814x.sh b/target/linux/mcs814x/base-files/lib/preinit/03_preinit_do_mcs814x.sh
new file mode 100755
index 0000000..d509770
--- /dev/null
+++ b/target/linux/mcs814x/base-files/lib/preinit/03_preinit_do_mcs814x.sh
@@ -0,0 +1,9 @@
+#!/bin/sh
+
+do_mcs814x() {
+	. /lib/mcs814x.sh
+
+	mcs814x_board_detect
+}
+
+boot_hook_add preinit_main do_mcs814x
diff --git a/target/linux/mcs814x/config-3.18 b/target/linux/mcs814x/config-3.18
new file mode 100644
index 0000000..427a7c9
--- /dev/null
+++ b/target/linux/mcs814x/config-3.18
@@ -0,0 +1,237 @@
+CONFIG_ALIGNMENT_TRAP=y
+CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
+CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
+# CONFIG_ARCH_HAS_SG_CHAIN is not set
+CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_MCS814X=y
+CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
+CONFIG_ARCH_NR_GPIO=0
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
+CONFIG_ARCH_SUPPORTS_UPROBES=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_ARCH_USES_GETTIMEOFFSET=y
+CONFIG_ARCH_USE_BUILTIN_BSWAP=y
+CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y
+CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
+CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
+CONFIG_ARM=y
+CONFIG_ARM_APPENDED_DTB=y
+# CONFIG_ARM_ATAG_DTB_COMPAT is not set
+# CONFIG_ARM_CPU_SUSPEND is not set
+CONFIG_ARM_L1_CACHE_SHIFT=5
+# CONFIG_ARM_THUMB is not set
+CONFIG_BINFMT_MISC=y
+# CONFIG_CACHE_L2X0 is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_CLKDEV_LOOKUP=y
+CONFIG_CLONE_BACKWARDS=y
+CONFIG_CMDLINE="earlyprintk"
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5TJ=y
+CONFIG_CPU_ARM926T=y
+# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_CPU_ICACHE_DISABLE is not set
+CONFIG_CPU_PABRT_LEGACY=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_USE_DOMAINS=y
+CONFIG_CRC_CCITT=y
+CONFIG_CRC_ITU_T=y
+CONFIG_CRYPTO_CRC32C=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_DEBUG_LL=y
+CONFIG_DEBUG_LL_INCLUDE="debug/8250.S"
+CONFIG_DEBUG_LL_UART_NONE=y
+CONFIG_DEBUG_UART_8250=y
+# CONFIG_DEBUG_UART_8250_FLOW_CONTROL is not set
+CONFIG_DEBUG_UART_8250_SHIFT=2
+# CONFIG_DEBUG_UART_8250_WORD is not set
+CONFIG_DEBUG_UART_PHYS=0x400dc000
+# CONFIG_DEBUG_UART_PL01X is not set
+CONFIG_DEBUG_UART_VIRT=0xf00dc000
+# CONFIG_DEBUG_USER is not set
+CONFIG_DTC=y
+CONFIG_EARLY_PRINTK=y
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
+CONFIG_FIQ=y
+CONFIG_FRAME_POINTER=y
+CONFIG_GENERIC_ALLOCATOR=y
+CONFIG_GENERIC_ATOMIC64=y
+CONFIG_GENERIC_BUG=y
+CONFIG_GENERIC_IDLE_POLL_SETUP=y
+CONFIG_GENERIC_IO=y
+CONFIG_GENERIC_IRQ_CHIP=y
+CONFIG_GENERIC_IRQ_SHOW=y
+CONFIG_GENERIC_PCI_IOMAP=y
+CONFIG_GENERIC_SCHED_CLOCK=y
+CONFIG_GENERIC_SMP_IDLE_THREAD=y
+CONFIG_GENERIC_STRNCPY_FROM_USER=y
+CONFIG_GENERIC_STRNLEN_USER=y
+CONFIG_GPIOLIB=y
+CONFIG_GPIO_DEVRES=y
+CONFIG_GPIO_MCS814X=y
+CONFIG_GPIO_SYSFS=y
+CONFIG_HANDLE_DOMAIN_IRQ=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_HAS_DMA=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT_MAP=y
+# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
+CONFIG_HAVE_ARCH_AUDITSYSCALL=y
+CONFIG_HAVE_ARCH_JUMP_LABEL=y
+CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_HAVE_ARCH_PFN_VALID=y
+CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
+CONFIG_HAVE_BPF_JIT=y
+CONFIG_HAVE_CC_STACKPROTECTOR=y
+CONFIG_HAVE_CLK=y
+CONFIG_HAVE_CONTEXT_TRACKING=y
+CONFIG_HAVE_C_RECORDMCOUNT=y
+CONFIG_HAVE_DEBUG_KMEMLEAK=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_HAVE_DMA_CONTIGUOUS=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_LZ4=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_HAVE_KERNEL_LZO=y
+CONFIG_HAVE_KERNEL_XZ=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_HAVE_MEMBLOCK=y
+CONFIG_HAVE_NET_DSA=y
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_PERF_EVENTS=y
+CONFIG_HAVE_PERF_REGS=y
+CONFIG_HAVE_PERF_USER_STACK_DUMP=y
+CONFIG_HAVE_PROC_CPU=y
+CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
+CONFIG_HAVE_UID16=y
+CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
+CONFIG_HW_RANDOM=y
+CONFIG_HW_RANDOM_MCS814X=y
+CONFIG_HZ_FIXED=0
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_IOMMU_HELPER=y
+CONFIG_IRQCHIP=y
+CONFIG_IRQ_DOMAIN=y
+CONFIG_IRQ_FORCED_THREADING=y
+CONFIG_IRQ_WORK=y
+# CONFIG_ISDN is not set
+CONFIG_JFFS2_LZO=y
+CONFIG_JFFS2_RUBIN=y
+# CONFIG_JFFS2_SUMMARY is not set
+CONFIG_JFFS2_ZLIB=y
+CONFIG_KALLSYMS=y
+CONFIG_LEDS_GPIO=y
+# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
+# CONFIG_LEDS_TRIGGER_NETDEV is not set
+# CONFIG_LEDS_TRIGGER_TIMER is not set
+CONFIG_LIBCRC32C=y
+CONFIG_LIBFDT=y
+CONFIG_LZO_COMPRESS=y
+CONFIG_LZO_DECOMPRESS=y
+CONFIG_MACH_DLAN_USB_EXT=y
+CONFIG_MACH_RBT_832=y
+CONFIG_MCS8140=y
+CONFIG_MCS814X_PHY=y
+# CONFIG_MCS814X_WATCHDOG is not set
+CONFIG_MDIO_BOARDINFO=y
+CONFIG_MODULES_USE_ELF_REL=y
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_IMPA7 is not set
+CONFIG_MTD_JEDECPROBE=y
+CONFIG_MTD_PHYSMAP=y
+# CONFIG_MTD_ROOTFS_SPLIT is not set
+CONFIG_MTD_SPLIT_FIRMWARE=y
+CONFIG_MTD_SPLIT_FIRMWARE_NAME="linux"
+CONFIG_MTD_SPLIT_UIMAGE_FW=y
+CONFIG_MULTI_IRQ_HANDLER=y
+CONFIG_NEED_DMA_MAP_STATE=y
+CONFIG_NEED_KUSER_HELPERS=y
+CONFIG_NEED_PER_CPU_KM=y
+CONFIG_NET_KEY=y
+# CONFIG_NET_VENDOR_BROADCOM is not set
+# CONFIG_NET_VENDOR_FARADAY is not set
+# CONFIG_NET_VENDOR_INTEL is not set
+# CONFIG_NET_VENDOR_MARVELL is not set
+# CONFIG_NET_VENDOR_MICREL is not set
+# CONFIG_NET_VENDOR_NATSEMI is not set
+# CONFIG_NET_VENDOR_SEEQ is not set
+# CONFIG_NET_VENDOR_SMSC is not set
+# CONFIG_NET_VENDOR_STMICRO is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-15"
+CONFIG_NO_BOOTMEM=y
+CONFIG_NUPORT_ETHERNET_DRIVER=y
+CONFIG_OF=y
+CONFIG_OF_ADDRESS=y
+CONFIG_OF_EARLY_FLATTREE=y
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_GPIO=y
+CONFIG_OF_IRQ=y
+CONFIG_OF_MDIO=y
+CONFIG_OF_MTD=y
+CONFIG_OF_NET=y
+CONFIG_OF_RESERVED_MEM=y
+CONFIG_OLD_SIGACTION=y
+CONFIG_OLD_SIGSUSPEND3=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_PAGE_OFFSET=0xC0000000
+# CONFIG_PARTITION_ADVANCED is not set
+# CONFIG_PCI_SYSCALL is not set
+CONFIG_PERF_USE_VMALLOC=y
+CONFIG_PHYLIB=y
+CONFIG_PHYS_OFFSET=0x00000000
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+# CONFIG_RCU_STALL_COMMON is not set
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+# CONFIG_SCHED_HRTICK is not set
+# CONFIG_SCSI_DMA is not set
+CONFIG_SERIAL_OF_PLATFORM=y
+CONFIG_SPLIT_PTLOCK_CPUS=999999
+# CONFIG_SWAP is not set
+CONFIG_SWIOTLB=y
+# CONFIG_SYN_COOKIES is not set
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_TICK_CPU_ACCOUNTING=y
+CONFIG_UID16=y
+CONFIG_UNCOMPRESS_INCLUDE="mach/uncompress.h"
+CONFIG_USB_SUPPORT=y
+CONFIG_USE_OF=y
+CONFIG_VECTORS_BASE=0xffff0000
+# CONFIG_VFP is not set
+# CONFIG_VLAN_8021Q is not set
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_WATCHDOG_CORE=y
+CONFIG_WATCHDOG_NOWAYOUT=y
+# CONFIG_WEXT_PRIV is not set
+# CONFIG_WEXT_SPY is not set
+# CONFIG_WIRELESS_EXT is not set
+CONFIG_XFRM_ALGO=y
+CONFIG_XZ_DEC_ARM=y
+CONFIG_XZ_DEC_BCJ=y
+CONFIG_ZBOOT_ROM_BSS=0
+CONFIG_ZBOOT_ROM_TEXT=0
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZONE_DMA_FLAG=0
diff --git a/target/linux/mcs814x/files-3.18/arch/arm/boot/dts/dlan-usb-extender.dts b/target/linux/mcs814x/files-3.18/arch/arm/boot/dts/dlan-usb-extender.dts
new file mode 100644
index 0000000..59830e8
--- /dev/null
+++ b/target/linux/mcs814x/files-3.18/arch/arm/boot/dts/dlan-usb-extender.dts
@@ -0,0 +1,68 @@
+/*
+ * dlan-usb-extender.dts - Device Tree file for Devolo dLAN USB Extender
+ *
+ * Copyright (C) 2012, Florian Fainelli <florian@openwrt.org>
+ *
+ * Licensed under GPLv2
+ */
+
+/dts-v1/;
+/include/ "mcs8140.dtsi"
+
+/ {
+	model = "Devolo dLAN USB Extender";
+	compatible = "devolo,dlan-usb-extender", "moschip,mcs8140", "moschip,mcs814x";
+
+	chosen {
+		bootargs = "mem=16M console=ttyS0,57600 earlyprintk";
+	};
+
+	ahb {
+		vci {
+			eth0: ethernet@40084000 {
+				phy = <&phy0>;
+				phy-mode = "mii";
+
+				phy0: ethernet-phy@0 {
+					reg = <8>;
+				};
+			};
+
+			adc {
+				sdram: memory@0,0 {
+					reg = <0 0 0x1000000>;
+				};
+
+				nor: flash@7,0 {
+
+					partition@0 {
+						label = "ArmBoot";
+						reg = <0 0x30000>;
+					};
+					partition@30000 {
+						label = "Config1";
+						reg = <0x30000 0x10000>;
+					};
+					partition@40000 {
+						label = "Config2";
+						reg = <0x40000 0x10000>;
+					};
+					partition@50000 {
+						label = "linux";
+						reg = <0x50000 0x4C0000>;
+					};
+				};
+			};
+
+			leds {
+				compatible = "gpio-leds";
+
+				usb {
+					label = "dlan-usb-extender:green:usb";
+					gpios = <&gpio 19 0>;	// gpio 19 active high
+				};
+			};
+		};
+	};
+};
+
diff --git a/target/linux/mcs814x/files-3.18/arch/arm/boot/dts/mcs8140.dtsi b/target/linux/mcs814x/files-3.18/arch/arm/boot/dts/mcs8140.dtsi
new file mode 100644
index 0000000..b7e8eb4
--- /dev/null
+++ b/target/linux/mcs814x/files-3.18/arch/arm/boot/dts/mcs8140.dtsi
@@ -0,0 +1,189 @@
+/*
+ * mcs8140.dtsi - Device Tree Include file for Moschip MCS8140 family SoC
+ *
+ * Copyright (C) 2012, Florian Fainelli <florian@openwrt.org>
+ *
+ * Licensed under GPLv2.
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+	model = "Moschip MCS8140 family SoC";
+	compatible = "moschip,mcs8140";
+	interrupt-parent = <&intc>;
+
+	aliases {
+		serial0 = &uart0;
+		eth0 = &eth0;
+	};
+
+	cpus {
+		cpu@0 {
+			compatible = "arm,arm926ejs";
+		};
+	};
+
+	ahb {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		vci {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			eth0: ethernet@40084000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				compatible = "moschip,nuport-mac";
+				reg = <0x40084000 0xd8		// mac
+					0x40080000 0x58>;	// dma channels
+				interrupts = <4 5 29>;	/* tx, rx, link */
+				nuport-mac,buffer-shifting;
+				nuport-mac,link-activity = <0>;
+			};
+
+			tso@40088000 {
+				reg = <0x40088000 0x1c>;
+				interrupts = <7>;
+			};
+
+			i2s@4008c000 {
+				compatible = "moschip,mcs814x-i2s";
+				reg = <0x4008c000 0x18>;
+				interrupts = <8>;
+			};
+
+			ipsec@40094000 {
+				compatible = "moschip,mcs814x-ipsec";
+				reg = <0x40094000 0x1d8>;
+				interrupts = <16>;
+			};
+
+			rng@4009c000 {
+				compatible = "moschip,mcs814x-rng";
+				reg = <0x4009c000 0x8>;
+			};
+
+			memc@400a8000 {
+				reg = <0x400a8000 0x58>;
+			};
+
+			list-proc@400ac0c0 {
+				reg = <0x400ac0c0 0x38>;
+				interrupts = <19 27>;		// done, error
+			};
+
+			gpio: gpio@400d0000 {
+				compatible = "moschip,mcs814x-gpio";
+				reg = <0x400d0000 0x670>;
+				interrupts = <10>;
+				#gpio-cells = <2>;
+				gpio-controller;
+				num-gpios = <20>;
+			};
+
+			eepio: gpio@400d4000 {
+				compatible = "moschip,mcs814x-gpio";
+				reg = <0x400d4000 0x470>;
+				#gpio-cells = <2>;
+				gpio-controller;
+				num-gpios = <4>;
+			};
+
+			uart0: serial@400dc000 {
+				compatible = "ns16550";
+				reg = <0x400dc000 0x20>;
+				clock-frequency = <50000000>;
+				reg-shift = <2>;
+				interrupts = <21>;
+				status = "okay";
+			};
+
+			intc: interrupt-controller@400e4000 {
+				#interrupt-cells = <1>;
+				compatible = "moschip,mcs814x-intc";
+				interrupt-controller;
+				interrupt-parent;
+				reg = <0x400e4000 0x48>;
+			};
+
+			m2m@400e8000 {
+				reg = <0x400e8000 0x24>;
+				interrupts = <17>;
+			};
+
+			eth-filters@400ec000 {
+				reg = <0x400ec000 0x80>;
+			};
+
+			timer: timer@400f800c {
+				compatible = "moschip,mcs814x-timer";
+				interrupts = <0>;
+				reg = <0x400f800c 0x8>;
+			};
+
+			watchdog@400f8014 {
+				compatible = "moschip,mcs814x-wdt";
+				reg = <0x400f8014 0x8>;
+			};
+
+			adc {
+				compatible = "simple-bus";
+				#address-cells = <2>;
+				#size-cells = <1>;
+				// 8 64MB chip-selects
+				ranges = <0 0 0x00000000 0x4000000	// sdram
+					  1 0 0x04000000 0x4000000	// sdram
+					  2 0 0x08000000 0x4000000	// reserved
+					  3 0 0x0c000000 0x4000000	// flash/localbus
+					  4 0 0x10000000 0x4000000	// flash/localbus
+					  5 0 0x14000000 0x4000000	// flash/localbus
+					  6 0 0x18000000 0x4000000	// flash/localbus
+					  7 0 0x1c000000 0x4000000>;	// flash/localbus
+
+				sdram: memory@0,0 {
+					reg = <0 0 0>;
+				};
+
+				nor: flash@7,0 {
+					reg = <7 0 0x4000000>;
+					compatible = "cfi-flash";
+					bank-width = <1>;		// 8-bit external flash
+					#address-cells = <1>;
+					#size-cells = <1>;
+                                };
+                        };
+
+			usb0: ehci@400fc000 {
+				compatible = "moschip,mcs814x-ehci", "usb-ehci";
+				reg = <0x400fc000 0x74>;
+				interrupts = <2>;
+			};
+
+			usb1: ohci@400fd000 {
+				compatible = "moschip,mcs814x-ohci", "ohci-le";
+				reg = <0x400fd000 0x74>;
+				interrupts = <11>;
+			};
+
+			usb2: ohci@400fe000 {
+				compatible = "moschip,mcs814x-ohci", "ohci-le";
+				reg = <0x400fe000 0x74>;
+				interrupts = <12>;
+			};
+
+			usb3: otg@400ff000 {
+				compatible = "moschip,msc814x-otg", "usb-otg";
+				reg = <0x400ff000 0x1000>;
+				interrupts = <13>;
+			};
+		};
+
+	};
+};
diff --git a/target/linux/mcs814x/files-3.18/arch/arm/boot/dts/rbt-832.dts b/target/linux/mcs814x/files-3.18/arch/arm/boot/dts/rbt-832.dts
new file mode 100644
index 0000000..9949c8e
--- /dev/null
+++ b/target/linux/mcs814x/files-3.18/arch/arm/boot/dts/rbt-832.dts
@@ -0,0 +1,89 @@
+/*
+ * rbt-832.dts - Device Tree file for Tigal RBT-832
+ *
+ * Copyright (C) 2012, Florian Fainelli <florian@openwrt.org>
+ *
+ * Licensed under GPLv2
+ */
+
+/dts-v1/;
+/include/ "mcs8140.dtsi"
+
+/ {
+	model = "Tigal RBT-832";
+	compatible = "tigal,rbt-832", "moschip,mcs8140", "moschip,mcs814x";
+
+	chosen {
+		bootargs = "mem=32M console=ttyS0,115200 earlyprintk";
+	};
+
+	ahb {
+		vci {
+			eth0: ethernet@40084000 {
+				nuport-mac,link-activity = <0x01>;
+				phy = <&phy0>;
+				phy-mode = "mii";
+
+				phy0: ethernet-phy@0 {
+					reg = <1>;
+				};
+			};
+
+			adc {
+				sdram: memory@0,0 {
+					reg = <0 0 0x2000000>;
+				};
+
+				nor: flash@7,0 {
+
+					partition@0 {
+						label = "ArmBoot";
+						reg = <0 0x40000>;
+					};
+					partition@30000 {
+						label = "Enviroment";
+						reg = <0x40000 0x20000>;
+					};
+					partition@50000 {
+						label = "bZimage";
+						reg = <0x60000 0x1a0000>;
+					};
+					partition@150000 {
+						label = "UserFS";
+						reg = <0x200000 0x600000>;
+					};
+				};
+			};
+
+			leds {
+				compatible = "gpio-leds";
+
+				ethernet {
+					label = "rbt-832:red:ethernet";
+					gpios = <&gpio 0 0>;	// gpio 0 active high
+				};
+
+				usb0 {
+					label = "rbt-832:red:usb0";
+					gpios = <&gpio 4 0>;	// gpio 4 active high
+				};
+
+				usb1 {
+					label = "rbt-832:red:usb1";
+					gpios = <&gpio 3 0>;	// gpio 3 active high
+				};
+
+				usb2 {
+					label = "rbt-832:red:usb2";
+					gpios = <&gpio 2 0>;	// gpio 2 active high
+				};
+
+				usb3 {
+					label = "rbt-832:red:usb3";
+					gpios = <&gpio 1 0>;	// gpio 1 active high
+				};
+			};
+		};
+	};
+};
+
diff --git a/target/linux/mcs814x/files-3.18/arch/arm/mach-mcs814x/Kconfig b/target/linux/mcs814x/files-3.18/arch/arm/mach-mcs814x/Kconfig
new file mode 100644
index 0000000..372c9b8
--- /dev/null
+++ b/target/linux/mcs814x/files-3.18/arch/arm/mach-mcs814x/Kconfig
@@ -0,0 +1,29 @@
+if ARCH_MCS814X
+
+config MCS8140
+	bool
+	select CPU_ARM926T
+
+menu "Moschip MCS8140 boards"
+
+config MACH_DLAN_USB_EXT
+	bool "Devolo dLAN USB Extender"
+	select MCS8140
+	select NEW_LEDS
+	select LEDS_CLASS
+	select LEDS_GPIO
+	help
+	  Machine support for the Devolo dLAN USB Extender
+
+config MACH_RBT_832
+	bool "Tigal RBT-832"
+	select MCS8140
+	select NEW_LEDS
+	select LEDS_CLASS
+	select LEDS_GPIO
+	help
+	  Machine support for the Tigal RBT-832 board
+
+endmenu
+
+endif
diff --git a/target/linux/mcs814x/files-3.18/arch/arm/mach-mcs814x/Makefile b/target/linux/mcs814x/files-3.18/arch/arm/mach-mcs814x/Makefile
new file mode 100644
index 0000000..68c5f4a
--- /dev/null
+++ b/target/linux/mcs814x/files-3.18/arch/arm/mach-mcs814x/Makefile
@@ -0,0 +1,5 @@
+obj-y += clock.o
+obj-y += common.o
+obj-y += irq.o
+obj-y += timer.o
+obj-y += board-mcs8140-dt.o
diff --git a/target/linux/mcs814x/files-3.18/arch/arm/mach-mcs814x/Makefile.boot b/target/linux/mcs814x/files-3.18/arch/arm/mach-mcs814x/Makefile.boot
new file mode 100644
index 0000000..b572507
--- /dev/null
+++ b/target/linux/mcs814x/files-3.18/arch/arm/mach-mcs814x/Makefile.boot
@@ -0,0 +1,4 @@
+    zreladdr-y := 0x00008000
+
+dtb-$(CONFIG_MACH_DLAN_USB_EXT) += dlan-usb-extender.dtb
+dtb-$(CONFIG_MACH_RBT_832) += rbt-832.dtb
diff --git a/target/linux/mcs814x/files-3.18/arch/arm/mach-mcs814x/board-mcs8140-dt.c b/target/linux/mcs814x/files-3.18/arch/arm/mach-mcs814x/board-mcs8140-dt.c
new file mode 100644
index 0000000..0d11450
--- /dev/null
+++ b/target/linux/mcs814x/files-3.18/arch/arm/mach-mcs814x/board-mcs8140-dt.c
@@ -0,0 +1,45 @@
+/*
+ * Setup code for Moschip MCS8140-based board using Device Tree
+ *
+ * Copyright (C) 2012, Florian Fainelli <florian@openwrt.org>
+ *
+ * Licensed under GPLv2.
+ */
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/gpio.h>
+#include <linux/irqdomain.h>
+#include <linux/of_platform.h>
+
+#include "common.h"
+
+#include <asm/setup.h>
+#include <asm/irq.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+static void __init mcs814x_dt_device_init(void)
+{
+	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
+	mcs814x_init_machine();
+}
+
+static const char *mcs8140_dt_board_compat[] __initdata = {
+	"moschip,mcs8140",
+	NULL,	/* sentinel */
+};
+
+DT_MACHINE_START(mcs8140_dt, "Moschip MCS8140 board")
+	/* Maintainer: Florian Fainelli <florian@openwrt.org> */
+	.map_io		= mcs814x_map_io,
+	.init_early	= mcs814x_clk_init,
+	.init_irq	= mcs814x_of_irq_init,
+	.init_time	= mcs814x_timer_init,
+	.init_machine	= mcs814x_dt_device_init,
+	.restart	= mcs814x_restart,
+	.dt_compat	= mcs8140_dt_board_compat,
+	.handle_irq	= mcs814x_handle_irq,
+MACHINE_END
+
diff --git a/target/linux/mcs814x/files-3.18/arch/arm/mach-mcs814x/clock.c b/target/linux/mcs814x/files-3.18/arch/arm/mach-mcs814x/clock.c
new file mode 100644
index 0000000..413bfec
--- /dev/null
+++ b/target/linux/mcs814x/files-3.18/arch/arm/mach-mcs814x/clock.c
@@ -0,0 +1,271 @@
+/*
+ * Moschip MCS814x clock routines
+ *
+ * Copyright (C) 2012, Florian Fainelli <florian@openwrt.org>
+ *
+ * Licensed under GPLv2
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/export.h>
+#include <linux/spinlock.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/clkdev.h>
+#include <linux/clk.h>
+
+#include <mach/mcs814x.h>
+
+#include "common.h"
+
+#define KHZ	1000
+#define MHZ	(KHZ * KHZ)
+
+struct clk_ops {
+	unsigned long (*get_rate)(struct clk *clk);
+	int (*set_rate)(struct clk *clk, unsigned long rate);
+	struct clk *(*get_parent)(struct clk *clk);
+	int (*enable)(struct clk *clk, int enable);
+};
+
+struct clk {
+	struct clk *parent;     	/* parent clk */
+	unsigned long rate;     	/* clock rate in Hz */
+	unsigned long divider;		/* clock divider */
+	u32 usecount;			/* reference count */
+	struct clk_ops *ops;		/* clock operation */
+	u32 enable_reg;			/* clock enable register */
+	u32 enable_mask;		/* clock enable mask */
+};
+
+static unsigned long clk_divide_parent(struct clk *clk)
+{
+	if (clk->parent && clk->divider)
+		return clk_get_rate(clk->parent) / clk->divider;
+	else
+		return 0;
+}
+
+static int clk_local_onoff_enable(struct clk *clk, int enable)
+{
+	u32 tmp;
+
+	/* no enable_reg means the clock is always enabled */
+	if (!clk->enable_reg)
+		return 0;
+
+	tmp = readl_relaxed(mcs814x_sysdbg_base + clk->enable_reg);
+	if (!enable)
+		tmp &= ~clk->enable_mask;
+	else
+		tmp |= clk->enable_mask;
+
+	writel_relaxed(tmp, mcs814x_sysdbg_base + clk->enable_reg);
+
+	return 0;
+}
+
+static struct clk_ops default_clk_ops = {
+	.get_rate	= clk_divide_parent,
+	.enable		= clk_local_onoff_enable,
+};
+
+static DEFINE_SPINLOCK(clocks_lock);
+
+static const unsigned long cpu_freq_table[] = {
+	175000,
+	300000,
+	125000,
+	137500,
+	212500,
+	250000,
+	162500,
+	187500,
+	162500,
+	150000,
+	225000,
+	237500,
+	200000,
+	262500,
+	275000,
+	287500
+};
+
+static struct clk clk_cpu;
+
+/* System clock is fixed at 50Mhz */
+static struct clk clk_sys = {
+	.rate	= 50 * MHZ,
+};
+
+static struct clk clk_sdram;
+
+static struct clk clk_timer0 = {
+	.parent	= &clk_sdram,
+	.divider = 2,
+	.ops	= &default_clk_ops,
+};
+
+static struct clk clk_timer1_2 = {
+	.parent	= &clk_sys,
+};
+
+/* Watchdog clock is system clock / 128 */
+static struct clk clk_wdt = {
+	.parent	= &clk_sys,
+	.divider = 128,
+	.ops	= &default_clk_ops,
+};
+
+static struct clk clk_emac = {
+	.ops		= &default_clk_ops,
+	.enable_reg	= SYSDBG_SYSCTL,
+	.enable_mask	= SYSCTL_EMAC,
+};
+
+static struct clk clk_ephy = {
+	.ops		= &default_clk_ops,
+	.enable_reg	= SYSDBG_PLL_CTL,
+	.enable_mask	= ~SYSCTL_EPHY,	/* active low */
+};
+
+static struct clk clk_cipher = {
+	.ops		= &default_clk_ops,
+	.enable_reg	= SYSDBG_SYSCTL,
+	.enable_mask	= SYSCTL_CIPHER,
+};
+
+#define CLK(_dev, _con, _clk)	\
+{ .dev_id = (_dev), .con_id = (_con), .clk = (_clk) },
+
+static struct clk_lookup mcs814x_chip_clks[] = {
+	CLK("cpu", NULL, &clk_cpu)
+	CLK("sys", NULL, &clk_sys)
+	CLK("sdram", NULL, &clk_sdram)
+	/* 32-bits timer0 */
+	CLK("timer0", NULL, &clk_timer0)
+	/* 16-bits timer1 */
+	CLK("timer1", NULL, &clk_timer1_2)
+	/* 64-bits timer2, same as timer 1 */
+	CLK("timer2", NULL, &clk_timer1_2)
+	CLK(NULL, "wdt", &clk_wdt)
+	CLK(NULL, "emac", &clk_emac)
+	CLK(NULL, "ephy", &clk_ephy)
+	CLK(NULL, "cipher", &clk_cipher)
+};
+
+static void local_clk_disable(struct clk *clk)
+{
+	WARN_ON(!clk->usecount);
+
+	if (clk->usecount > 0) {
+		clk->usecount--;
+
+		if ((clk->usecount == 0) && (clk->ops->enable))
+			clk->ops->enable(clk, 0);
+
+		if (clk->parent)
+			local_clk_disable(clk->parent);
+	}
+}
+
+static int local_clk_enable(struct clk *clk)
+{
+	int ret = 0;
+
+	if (clk->parent)
+		ret = local_clk_enable(clk->parent);
+
+	if (ret)
+		return ret;
+
+	if ((clk->usecount == 0) && (clk->ops->enable))
+		ret = clk->ops->enable(clk, 1);
+
+	if (!ret)
+		clk->usecount++;
+	else if (clk->parent && clk->parent->ops->enable)
+		local_clk_disable(clk->parent);
+
+	return ret;
+}
+
+int clk_enable(struct clk *clk)
+{
+	int ret;
+	unsigned long flags;
+
+	spin_lock_irqsave(&clocks_lock, flags);
+	ret = local_clk_enable(clk);
+	spin_unlock_irqrestore(&clocks_lock, flags);
+
+	return ret;
+}
+EXPORT_SYMBOL(clk_enable);
+
+void clk_disable(struct clk *clk)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&clocks_lock, flags);
+	local_clk_disable(clk);
+	spin_unlock_irqrestore(&clocks_lock, flags);
+}
+EXPORT_SYMBOL(clk_disable);
+
+unsigned long clk_get_rate(struct clk *clk)
+{
+	if (unlikely(IS_ERR_OR_NULL(clk)))
+		return 0;
+
+	if (clk->rate)
+		return clk->rate;
+
+	if (clk->ops && clk->ops->get_rate)
+		return clk->ops->get_rate(clk);
+
+	return clk_get_rate(clk->parent);
+}
+EXPORT_SYMBOL(clk_get_rate);
+
+struct clk *clk_get_parent(struct clk *clk)
+{
+	unsigned long flags;
+
+	if (unlikely(IS_ERR_OR_NULL(clk)))
+		return NULL;
+
+	if (!clk->ops || !clk->ops->get_parent)
+		return clk->parent;
+
+	spin_lock_irqsave(&clocks_lock, flags);
+	clk->parent = clk->ops->get_parent(clk);
+	spin_unlock_irqrestore(&clocks_lock, flags);
+
+	return clk->parent;
+}
+EXPORT_SYMBOL(clk_get_parent);
+
+void __init mcs814x_clk_init(void)
+{
+	u32 bs1;
+	u8 cpu_freq;
+
+	clkdev_add_table(mcs814x_chip_clks, ARRAY_SIZE(mcs814x_chip_clks));
+
+	/* read the bootstrap registers to know the exact clocking scheme */
+	bs1 = readl_relaxed(mcs814x_sysdbg_base + SYSDBG_BS1);
+	cpu_freq = (bs1 >> CPU_FREQ_SHIFT) & CPU_FREQ_MASK;
+
+	pr_info("CPU frequency: %lu (kHz)\n", cpu_freq_table[cpu_freq]);
+	clk_cpu.rate = cpu_freq * KHZ;
+
+	/* read SDRAM frequency */
+	if (bs1 & SDRAM_FREQ_BIT)
+		clk_sdram.rate = 100 * MHZ;
+	else
+		clk_sdram.rate = 133 * MHZ;
+
+	pr_info("SDRAM frequency: %lu (MHz)\n", clk_sdram.rate / MHZ);
+}
+
diff --git a/target/linux/mcs814x/files-3.18/arch/arm/mach-mcs814x/common.c b/target/linux/mcs814x/files-3.18/arch/arm/mach-mcs814x/common.c
new file mode 100644
index 0000000..3f1be1f
--- /dev/null
+++ b/target/linux/mcs814x/files-3.18/arch/arm/mach-mcs814x/common.c
@@ -0,0 +1,166 @@
+/*
+ * arch/arm/mach-mcs814x/common.c
+ *
+ * Core functions for Moschip MCS814x SoCs
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/reboot.h>
+
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <mach/mcs814x.h>
+#include <mach/cpu.h>
+#include <asm/pgtable.h>
+#include <asm/mach/map.h>
+
+void __iomem *mcs814x_sysdbg_base;
+
+static struct map_desc mcs814x_io_desc[] __initdata = {
+	{
+		.virtual	= MCS814X_IO_BASE,
+		.pfn		= __phys_to_pfn(MCS814X_IO_START),
+		.length		= MCS814X_IO_SIZE,
+		.type		= MT_DEVICE
+	},
+};
+
+struct cpu_mode {
+	const char *name;
+	int gpio_start;
+	int gpio_end;
+};
+
+static const struct cpu_mode cpu_modes[] = {
+	{
+		.name		= "I2S",
+		.gpio_start	= 4,
+		.gpio_end	= 8,
+	},
+	{
+		.name		= "UART",
+		.gpio_start	= 4,
+		.gpio_end	= 9,
+	},
+	{
+		.name		= "External MII",
+		.gpio_start	= 0,
+		.gpio_end	= 16,
+	},
+	{
+		.name		= "Normal",
+		.gpio_start	= -1,
+		.gpio_end	= -1,
+	},
+};
+
+static void mcs814x_eth_hardware_filter_set(u8 value)
+{
+	u32 reg;
+
+	reg = readl_relaxed(MCS814X_VIRT_BASE + MCS814X_DBGLED);
+	if (value)
+		reg |= 0x80;
+	else
+		reg &= ~0x80;
+	writel_relaxed(reg, MCS814X_VIRT_BASE + MCS814X_DBGLED);
+}
+
+static void mcs814x_eth_led_cfg_set(u8 cfg)
+{
+	u32 reg;
+
+	reg = readl_relaxed(mcs814x_sysdbg_base + SYSDBG_BS2);
+	reg &= ~LED_CFG_MASK;
+	reg |= cfg;
+	writel_relaxed(reg, mcs814x_sysdbg_base + SYSDBG_BS2);
+}
+
+static void mcs814x_eth_buffer_shifting_set(u8 value)
+{
+	u8 reg;
+
+	reg = readb_relaxed(mcs814x_sysdbg_base + SYSDBG_SYSCTL_MAC);
+	if (value)
+		reg |= BUF_SHIFT_BIT;
+	else
+		reg &= ~BUF_SHIFT_BIT;
+	writeb_relaxed(reg, mcs814x_sysdbg_base + SYSDBG_SYSCTL_MAC);
+}
+
+static struct of_device_id mcs814x_eth_ids[] __initdata = {
+	{ .compatible = "moschip,nuport-mac", },
+	{ /* sentinel */ },
+};
+
+/* Configure platform specific knobs based on ethernet device node
+ * properties */
+static void mcs814x_eth_init(void)
+{
+	struct device_node *np;
+	const unsigned int *intspec;
+
+	np = of_find_matching_node(NULL, mcs814x_eth_ids);
+	if (!np)
+		return;
+
+	/* hardware filter must always be enabled */
+	mcs814x_eth_hardware_filter_set(1);
+
+	intspec = of_get_property(np, "nuport-mac,buffer-shifting", NULL);
+	if (!intspec)
+		mcs814x_eth_buffer_shifting_set(0);
+	else
+		mcs814x_eth_buffer_shifting_set(1);
+
+	intspec = of_get_property(np, "nuport-mac,link-activity", NULL);
+	if (intspec)
+		mcs814x_eth_led_cfg_set(be32_to_cpup(intspec));
+
+	of_node_put(np);
+}
+
+void __init mcs814x_init_machine(void)
+{
+	u32 bs2, cpu_mode;
+	int gpio;
+
+	bs2 = readl_relaxed(mcs814x_sysdbg_base + SYSDBG_BS2);
+	cpu_mode = (bs2 >> CPU_MODE_SHIFT) & CPU_MODE_MASK;
+
+	pr_info("CPU mode: %s\n", cpu_modes[cpu_mode].name);
+
+	/* request the gpios since the pins are muxed for functionnality */
+	for (gpio = cpu_modes[cpu_mode].gpio_start;
+		gpio == cpu_modes[cpu_mode].gpio_end; gpio++) {
+		if (gpio != -1)
+			gpio_request(gpio, cpu_modes[cpu_mode].name);
+	}
+
+	mcs814x_eth_init();
+}
+
+void __init mcs814x_map_io(void)
+{
+	iotable_init(mcs814x_io_desc, ARRAY_SIZE(mcs814x_io_desc));
+
+	mcs814x_sysdbg_base = ioremap(MCS814X_IO_START + MCS814X_SYSDBG,
+					MCS814X_SYSDBG_SIZE);
+	if (!mcs814x_sysdbg_base)
+		panic("unable to remap sysdbg base");
+}
+
+void mcs814x_restart(enum reboot_mode mode, const char *cmd)
+{
+	writel_relaxed(~(1 << 31), mcs814x_sysdbg_base);
+}
diff --git a/target/linux/mcs814x/files-3.18/arch/arm/mach-mcs814x/common.h b/target/linux/mcs814x/files-3.18/arch/arm/mach-mcs814x/common.h
new file mode 100644
index 0000000..4a6c9ad
--- /dev/null
+++ b/target/linux/mcs814x/files-3.18/arch/arm/mach-mcs814x/common.h
@@ -0,0 +1,16 @@
+#ifndef __ARCH_MCS814X_COMMON_H
+#define __ARCH_MCS814X_COMMON_H
+
+#include <linux/reboot.h>
+#include <asm/mach/time.h>
+
+void mcs814x_map_io(void);
+void mcs814x_clk_init(void);
+void mcs814x_of_irq_init(void);
+void mcs814x_init_machine(void);
+void mcs814x_handle_irq(struct pt_regs *regs);
+void mcs814x_restart(enum reboot_mode mode, const char *cmd);
+void mcs814x_timer_init(void);
+extern void __iomem *mcs814x_sysdbg_base;
+
+#endif /* __ARCH_MCS814X_COMMON_H */
diff --git a/target/linux/mcs814x/files-3.18/arch/arm/mach-mcs814x/include/mach/cpu.h b/target/linux/mcs814x/files-3.18/arch/arm/mach-mcs814x/include/mach/cpu.h
new file mode 100644
index 0000000..1ef3c4a
--- /dev/null
+++ b/target/linux/mcs814x/files-3.18/arch/arm/mach-mcs814x/include/mach/cpu.h
@@ -0,0 +1,16 @@
+#ifndef __ASM_ARCH_CPU_H__
+#define __ASM_ARCH_CPU_H__
+
+#include <asm/cputype.h>
+
+#define MCS8140_ID	0x41069260	/* ARM926EJ-S */
+#define MCS814X_MASK	0xff0ffff0
+
+#ifdef CONFIG_MCS8140
+/* Moschip MCS8140 is based on an ARM926EJ-S core */
+#define soc_is_mcs8140()	((read_cpuid_id() & MCS814X_MASK) == MCS8140_ID)
+#else
+#define soc_is_mcs8140()	(0)
+#endif /* !CONFIG_MCS8140 */
+
+#endif /* __ASM_ARCH_CPU_H__ */
diff --git a/target/linux/mcs814x/files-3.18/arch/arm/mach-mcs814x/include/mach/debug-macro.S b/target/linux/mcs814x/files-3.18/arch/arm/mach-mcs814x/include/mach/debug-macro.S
new file mode 100644
index 0000000..93ecea4
--- /dev/null
+++ b/target/linux/mcs814x/files-3.18/arch/arm/mach-mcs814x/include/mach/debug-macro.S
@@ -0,0 +1,11 @@
+#include <mach/mcs814x.h>
+
+                .macro  addruart, rp, rv, tmp
+		ldr	\rp, =MCS814X_PHYS_BASE
+		ldr	\rv, =MCS814X_VIRT_BASE
+		orr	\rp, \rp, #MCS814X_UART
+		orr	\rv, \rv, #MCS814X_UART
+                .endm
+
+#define UART_SHIFT	2
+#include <asm/hardware/debug-8250.S>
diff --git a/target/linux/mcs814x/files-3.18/arch/arm/mach-mcs814x/include/mach/entry-macro.S b/target/linux/mcs814x/files-3.18/arch/arm/mach-mcs814x/include/mach/entry-macro.S
new file mode 100644
index 0000000..16d2d6d
--- /dev/null
+++ b/target/linux/mcs814x/files-3.18/arch/arm/mach-mcs814x/include/mach/entry-macro.S
@@ -0,0 +1,6 @@
+#include <mach/mcs814x.h>
+                .macro  disable_fiq
+                .endm
+
+		.macro arch_ret_to_user, tmp1, tmp2
+		.endm
diff --git a/target/linux/mcs814x/files-3.18/arch/arm/mach-mcs814x/include/mach/gpio.h b/target/linux/mcs814x/files-3.18/arch/arm/mach-mcs814x/include/mach/gpio.h
new file mode 100644
index 0000000..20240c2
--- /dev/null
+++ b/target/linux/mcs814x/files-3.18/arch/arm/mach-mcs814x/include/mach/gpio.h
@@ -0,0 +1,21 @@
+#ifndef __ASM_ARCH_GPIO_H
+#define __ASM_ARCH_GPIO_H
+
+/* new generic GPIO API */
+#include <asm-generic/gpio.h>
+
+#define gpio_get_value	__gpio_get_value
+#define gpio_set_value	__gpio_set_value
+#define gpio_cansleep	__gpio_cansleep
+
+static inline int gpio_to_irq(unsigned gpio)
+{
+	return -EINVAL;
+}
+
+static inline int irq_to_gpio(unsigned irq)
+{
+	return -EINVAL;
+}
+
+#endif
diff --git a/target/linux/mcs814x/files-3.18/arch/arm/mach-mcs814x/include/mach/hardware.h b/target/linux/mcs814x/files-3.18/arch/arm/mach-mcs814x/include/mach/hardware.h
new file mode 100644
index 0000000..529f648
--- /dev/null
+++ b/target/linux/mcs814x/files-3.18/arch/arm/mach-mcs814x/include/mach/hardware.h
@@ -0,0 +1,16 @@
+/*
+ * Copyright (C) 2003 Artec Design Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+#include "mcs814x.h"
+
+#endif
+
diff --git a/target/linux/mcs814x/files-3.18/arch/arm/mach-mcs814x/include/mach/io.h b/target/linux/mcs814x/files-3.18/arch/arm/mach-mcs814x/include/mach/io.h
new file mode 100644
index 0000000..80e56f6
--- /dev/null
+++ b/target/linux/mcs814x/files-3.18/arch/arm/mach-mcs814x/include/mach/io.h
@@ -0,0 +1,27 @@
+/*
+ * Copyright (C) 2003 Artec Design Ltd.
+ * Copyright (C) 2012, Florian Fainelli <florian@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+#define IO_SPACE_LIMIT		0xffffffff
+
+/*
+ * We don't support ins[lb]/outs[lb].  Make them fault.
+ */
+#define __raw_readsb(p, d, l)	do { *(int *)0 = 0; } while (0)
+#define __raw_readsl(p, d, l)	do { *(int *)0 = 0; } while (0)
+#define __raw_writesb(p, d, l)	do { *(int *)0 = 0; } while (0)
+#define __raw_writesl(p, d, l)	do { *(int *)0 = 0; } while (0)
+
+#define __io(a)		__typesafe_io(a)
+#define __mem_pci(a)	(a)
+
+#endif
diff --git a/target/linux/mcs814x/files-3.18/arch/arm/mach-mcs814x/include/mach/irqs.h b/target/linux/mcs814x/files-3.18/arch/arm/mach-mcs814x/include/mach/irqs.h
new file mode 100644
index 0000000..7b9e07c
--- /dev/null
+++ b/target/linux/mcs814x/files-3.18/arch/arm/mach-mcs814x/include/mach/irqs.h
@@ -0,0 +1,17 @@
+/*
+ * Copyright (C) 2003 Artec Design Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef __ASM_ARCH_IRQS_H
+#define __ASM_ARCH_IRQS_H
+
+#define FIQ_START	0
+
+#define NR_IRQS		32
+
+#endif
diff --git a/target/linux/mcs814x/files-3.18/arch/arm/mach-mcs814x/include/mach/mcs814x.h b/target/linux/mcs814x/files-3.18/arch/arm/mach-mcs814x/include/mach/mcs814x.h
new file mode 100644
index 0000000..8252d33
--- /dev/null
+++ b/target/linux/mcs814x/files-3.18/arch/arm/mach-mcs814x/include/mach/mcs814x.h
@@ -0,0 +1,53 @@
+/*
+ * Copyright (C) 2003 Artec Design Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef __ASM_ARCH_MCS814X_H
+#define __ASM_ARCH_MCS814X_H
+
+#define MCS814X_IO_BASE		0xF0000000
+#define MCS814X_IO_START	0x40000000
+#define MCS814X_IO_SIZE		0x00100000
+
+/* IRQ controller register offset */
+#define MCS814X_IRQ_ICR		0x00
+#define MCS814X_IRQ_ISR		0x04
+#define MCS814X_IRQ_MASK	0x20
+#define MCS814X_IRQ_STS0	0x40
+
+#define MCS814X_PHYS_BASE	0x40000000
+#define MCS814X_VIRT_BASE	MCS814X_IO_BASE
+
+#define MCS814X_UART    	0x000DC000
+#define MCS814X_DBGLED  	0x000EC000
+#define MCS814X_SYSDBG  	0x000F8000
+#define MCS814X_SYSDBG_SIZE	0x50
+
+/* System configuration and bootstrap registers */
+#define SYSDBG_BS1		0x00
+#define  CPU_FREQ_SHIFT		27
+#define  CPU_FREQ_MASK		0x0F
+#define  SDRAM_FREQ_BIT		(1 << 22)
+
+#define SYSDBG_BS2		0x04
+#define  LED_CFG_MASK		0x03
+#define  CPU_MODE_SHIFT		23
+#define  CPU_MODE_MASK		0x03
+
+#define SYSDBG_SYSCTL_MAC	0x1d
+#define  BUF_SHIFT_BIT		(1 << 0)
+
+#define SYSDBG_SYSCTL		0x08
+#define  SYSCTL_EMAC		(1 << 0)
+#define  SYSCTL_EPHY		(1 << 0) /* active low */
+#define  SYSCTL_CIPHER		(1 << 16)
+
+#define SYSDBG_PLL_CTL		0x3C
+
+#endif /* __ASM_ARCH_MCS814X_H */
+
diff --git a/target/linux/mcs814x/files-3.18/arch/arm/mach-mcs814x/include/mach/param.h b/target/linux/mcs814x/files-3.18/arch/arm/mach-mcs814x/include/mach/param.h
new file mode 100644
index 0000000..7ffe70b
--- /dev/null
+++ b/target/linux/mcs814x/files-3.18/arch/arm/mach-mcs814x/include/mach/param.h
@@ -0,0 +1,15 @@
+/*
+ * Copyright (C) 2003 Artec Design Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef __ASM_ARCH_PARAM_H
+#define __ASM_ARCH_PARAM_H
+
+#define HZ 100
+
+#endif
diff --git a/target/linux/mcs814x/files-3.18/arch/arm/mach-mcs814x/include/mach/system.h b/target/linux/mcs814x/files-3.18/arch/arm/mach-mcs814x/include/mach/system.h
new file mode 100644
index 0000000..cf5453d
--- /dev/null
+++ b/target/linux/mcs814x/files-3.18/arch/arm/mach-mcs814x/include/mach/system.h
@@ -0,0 +1,18 @@
+/*
+ * Copyright (C) 2003 Artec Design Ltd.
+ * Copyright (C) 2012 Florian Fainelli <florian@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H
+
+static inline void arch_idle(void)
+{
+	cpu_do_idle();
+}
+#endif
diff --git a/target/linux/mcs814x/files-3.18/arch/arm/mach-mcs814x/include/mach/timex.h b/target/linux/mcs814x/files-3.18/arch/arm/mach-mcs814x/include/mach/timex.h
new file mode 100644
index 0000000..f05c8ee
--- /dev/null
+++ b/target/linux/mcs814x/files-3.18/arch/arm/mach-mcs814x/include/mach/timex.h
@@ -0,0 +1,18 @@
+/*
+ * Copyright (C) 2003 Artec Design Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef __ASM_ARCH_TIMEX_H
+#define __ASM_ARCH_TIMEX_H
+
+/*
+ * Timex specification for MCS814X
+ */
+#define CLOCK_TICK_RATE		100
+
+#endif
diff --git a/target/linux/mcs814x/files-3.18/arch/arm/mach-mcs814x/include/mach/uncompress.h b/target/linux/mcs814x/files-3.18/arch/arm/mach-mcs814x/include/mach/uncompress.h
new file mode 100644
index 0000000..cf3ed9a
--- /dev/null
+++ b/target/linux/mcs814x/files-3.18/arch/arm/mach-mcs814x/include/mach/uncompress.h
@@ -0,0 +1,40 @@
+/*
+ * Copyright (C) 2012, Florian Fainelli <florian@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_UNCOMPRESS_H
+#define __ASM_ARCH_UNCOMPRESS_H
+
+#include <linux/serial_reg.h>
+#include <asm/io.h>
+#include <mach/mcs814x.h>
+#include <mach/cpu.h>
+
+#define UART_SHIFT	(2)
+
+/* cannot be static because the code will be inlined */
+void __iomem *uart_base;
+
+static inline void putc(int c)
+{
+	while (!(__raw_readb(uart_base + (UART_LSR << UART_SHIFT)) & UART_LSR_TEMT));
+	__raw_writeb(c, uart_base + (UART_TX << UART_SHIFT));
+}
+
+static inline void flush(void)
+{
+}
+
+static inline void arch_decomp_setup(void)
+{
+	if (soc_is_mcs8140())
+		uart_base = (void __iomem *)(MCS814X_PHYS_BASE +MCS814X_UART);
+}
+
+#define arch_decomp_wdog()
+
+#endif
diff --git a/target/linux/mcs814x/files-3.18/arch/arm/mach-mcs814x/irq.c b/target/linux/mcs814x/files-3.18/arch/arm/mach-mcs814x/irq.c
new file mode 100644
index 0000000..d1cab68
--- /dev/null
+++ b/target/linux/mcs814x/files-3.18/arch/arm/mach-mcs814x/irq.c
@@ -0,0 +1,94 @@
+/*
+ * Moschip MCS814x generic interrupt controller routines
+ *
+ * Copyright (C) 2012, Florian Fainelli <florian@openwrt.org>
+ *
+ * Licensed under the GPLv2
+ */
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/irqdomain.h>
+
+#include <asm/exception.h>
+#include <asm/mach/irq.h>
+#include <mach/mcs814x.h>
+
+static void __iomem *mcs814x_intc_base;
+static struct irq_domain *domain;
+
+static void __init mcs814x_alloc_gc(void __iomem *base, unsigned int irq_start,
+					unsigned int num)
+{
+	struct irq_chip_generic *gc;
+	struct irq_chip_type *ct;
+
+	if (irq_alloc_domain_generic_chips(domain, num, 1, "mcs814x-intc", handle_level_irq,
+                IRQ_GC_INIT_MASK_CACHE, IRQ_NOREQUEST, 0))
+		panic("unable to allocate domain generic irq chip");
+
+	gc = irq_get_domain_generic_chip(domain, irq_start);
+	if (!gc)
+		panic("unable to get generic irq chip");
+
+	gc->reg_base = base;
+	ct = gc->chip_types;
+	ct->chip.irq_ack = irq_gc_unmask_enable_reg;
+	ct->chip.irq_mask = irq_gc_mask_clr_bit;
+	ct->chip.irq_unmask = irq_gc_mask_set_bit;
+	ct->regs.mask = MCS814X_IRQ_MASK;
+	ct->regs.enable = MCS814X_IRQ_ICR;
+
+	/* Clear all interrupts */
+	writel_relaxed(0xffffffff, base + MCS814X_IRQ_ICR);
+}
+
+asmlinkage void __exception_irq_entry mcs814x_handle_irq(struct pt_regs *regs)
+{
+	u32 status, irq;
+
+	do {
+		/* read the status register */
+		status = __raw_readl(mcs814x_intc_base + MCS814X_IRQ_STS0);
+		if (!status)
+			break;
+
+		irq = ffs(status) - 1;
+		status |= (1 << irq);
+		/* clear the interrupt */
+		__raw_writel(status, mcs814x_intc_base + MCS814X_IRQ_STS0);
+		/* call the generic handler */
+		handle_domain_irq(domain, irq, regs);
+
+	} while (1);
+}
+
+static const struct of_device_id mcs814x_intc_ids[] = {
+	{ .compatible = "moschip,mcs814x-intc" },
+	{ /* sentinel */ },
+};
+
+void __init mcs814x_of_irq_init(void)
+{
+	struct device_node *np;
+
+	np = of_find_matching_node(NULL, mcs814x_intc_ids);
+	if (!np)
+		panic("unable to find compatible intc node in dtb\n");
+
+	mcs814x_intc_base = of_iomap(np, 0);
+	if (!mcs814x_intc_base)
+		panic("unable to map intc cpu registers\n");
+
+	domain = irq_domain_add_linear(np, 32, &irq_generic_chip_ops, NULL);
+	if (!domain)
+		panic("unable to add irq domain\n");
+	irq_set_default_host(domain);
+
+	of_node_put(np);
+
+	mcs814x_alloc_gc(mcs814x_intc_base, 0, 32);
+}
+
diff --git a/target/linux/mcs814x/files-3.18/arch/arm/mach-mcs814x/timer.c b/target/linux/mcs814x/files-3.18/arch/arm/mach-mcs814x/timer.c
new file mode 100644
index 0000000..31d0ba6
--- /dev/null
+++ b/target/linux/mcs814x/files-3.18/arch/arm/mach-mcs814x/timer.c
@@ -0,0 +1,132 @@
+/*
+ * Moschip MCS814x timer routines
+ *
+ * Copyright (C) 2012, Florian Fainelli <florian@openwrt.org>
+ *
+ * Licensed under GPLv2
+ */
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/time.h>
+#include <linux/timex.h>
+#include <linux/irq.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+
+#include <asm/mach/time.h>
+#include <mach/mcs814x.h>
+
+/* Timer block registers */
+#define TIMER_VAL	0x00
+#define TIMER_CTL	0x04
+#define  TIMER_CTL_EN	0x01
+#define  TIMER_CTL_DBG	0x02
+
+static u32 last_reload;
+static u32 timer_correct;
+static u32 clock_rate;
+static u32 timer_reload_value;
+static void __iomem *mcs814x_timer_base;
+
+static inline u32 ticks2usecs(u32 x)
+{
+	return x / (clock_rate / 1000000);
+}
+
+/*
+ * Returns number of ms since last clock interrupt.  Note that interrupts
+ * will have been disabled by do_gettimeoffset()
+ */
+static u32 mcs814x_gettimeoffset(void)
+{
+	u32 ticks = readl_relaxed(mcs814x_timer_base + TIMER_VAL);
+
+	if (ticks < last_reload)
+		return ticks2usecs(ticks + (u32)(0xffffffff - last_reload));
+	else
+		return ticks2usecs(ticks - last_reload);
+}
+
+
+static irqreturn_t mcs814x_timer_interrupt(int irq, void *dev_id)
+{
+	u32 count = readl_relaxed(mcs814x_timer_base + TIMER_VAL);
+
+	/* take into account delay up to this moment */
+	last_reload = count + timer_correct + timer_reload_value;
+
+	if (last_reload < timer_reload_value) {
+		last_reload = timer_reload_value;
+	} else {
+		if (timer_correct == 0)
+			timer_correct = readl_relaxed(mcs814x_timer_base + TIMER_VAL) - count;
+	}
+	writel_relaxed(last_reload, mcs814x_timer_base + TIMER_VAL);
+
+	timer_tick();
+
+	return IRQ_HANDLED;
+}
+
+static struct of_device_id mcs814x_timer_ids[] = {
+	{ .compatible = "moschip,mcs814x-timer" },
+	{ /* sentinel */ },
+};
+
+static int __init mcs814x_of_timer_init(void)
+{
+	struct device_node *np;
+	int irq;
+
+	np = of_find_matching_node(NULL, mcs814x_timer_ids);
+	if (!np)
+		panic("unable to find compatible timer node in dtb");
+
+	mcs814x_timer_base = of_iomap(np, 0);
+	if (!mcs814x_timer_base)
+		panic("unable to remap timer cpu registers");
+
+	irq = irq_of_parse_and_map(np, 0);
+	if (!irq)
+		panic("no interrupts property/mapping failed for timer");
+
+	return irq;
+}
+
+void __init mcs814x_timer_init(void)
+{
+	struct clk *clk;
+	int irq;
+
+	arch_gettimeoffset = mcs814x_gettimeoffset;
+
+	clk = clk_get_sys("timer0", NULL);
+	if (IS_ERR_OR_NULL(clk))
+		panic("unable to get timer0 clock");
+
+	clock_rate = clk_get_rate(clk);
+
+	irq = mcs814x_of_timer_init();
+
+	pr_info("Timer frequency: %d (kHz)\n", clock_rate / 1000);
+
+	timer_reload_value = 0xffffffff - (clock_rate / HZ);
+
+	/* disable timer */
+	writel_relaxed(~TIMER_CTL_EN, mcs814x_timer_base + TIMER_CTL);
+	writel_relaxed(timer_reload_value, mcs814x_timer_base + TIMER_VAL);
+	last_reload = timer_reload_value;
+
+	if (request_irq(irq, mcs814x_timer_interrupt,
+		IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
+		"mcs814x-timer", NULL))
+		panic("unable to request timer0 irq %d", irq);
+
+	/* enable timer, stop timer in debug mode */
+	writel_relaxed(TIMER_CTL_EN | TIMER_CTL_DBG,
+		mcs814x_timer_base + TIMER_CTL);
+}
diff --git a/target/linux/mcs814x/files-3.18/drivers/char/hw_random/mcs814x-rng.c b/target/linux/mcs814x/files-3.18/drivers/char/hw_random/mcs814x-rng.c
new file mode 100644
index 0000000..cb3f339
--- /dev/null
+++ b/target/linux/mcs814x/files-3.18/drivers/char/hw_random/mcs814x-rng.c
@@ -0,0 +1,121 @@
+/*
+ * RNG driver for Moschip MCS814x SoC
+ *
+ * Copyright 2012 (C), Florian Fainelli <florian@openwrt.org>
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/platform_device.h>
+#include <linux/hw_random.h>
+#include <linux/io.h>
+#include <linux/of.h>
+
+#define STAT	0x00
+#define RND	0x04
+
+struct mcs814x_rng_priv {
+	void __iomem	*regs;
+};
+
+static int mcs814x_rng_data_read(struct hwrng *rng, u32 *buffer)
+{
+	struct mcs814x_rng_priv *priv = (struct mcs814x_rng_priv *)rng->priv;
+
+	*buffer = readl_relaxed(priv->regs + RND);
+
+	return 4;
+}
+
+static int mcs814x_rng_probe(struct platform_device *pdev)
+{
+	struct resource *res;
+	struct mcs814x_rng_priv *priv;
+	struct hwrng *rng;
+	int ret;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res)
+		return -ENODEV;
+
+	priv = kzalloc(sizeof(*priv), GFP_KERNEL);
+	if (!priv) {
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	rng = kzalloc(sizeof(*rng), GFP_KERNEL);
+	if (!rng) {
+		ret = -ENOMEM;
+		goto out_priv;
+	}
+
+	platform_set_drvdata(pdev, rng);
+	rng->priv = (unsigned long)priv;
+	rng->name = pdev->name;
+	rng->data_read = mcs814x_rng_data_read;
+
+	priv->regs = devm_ioremap_resource(&pdev->dev, res);
+	if (!priv->regs) {
+		ret = -ENOMEM;
+		goto out_rng;
+	}
+
+	ret = hwrng_register(rng);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to register hwrng driver\n");
+		goto out;
+	}
+
+	dev_info(&pdev->dev, "registered\n");
+
+	return ret;
+
+out_rng:
+	platform_set_drvdata(pdev, NULL);
+	kfree(rng);
+out_priv:
+	kfree(priv);
+out:
+	return ret;
+}
+
+static int mcs814x_rng_remove(struct platform_device *pdev)
+{
+	struct hwrng *rng = platform_get_drvdata(pdev);
+	struct mcs814x_rng_priv *priv = (struct mcs814x_rng_priv *)rng->priv;
+
+	hwrng_unregister(rng);
+	kfree(priv);
+	kfree(rng);
+	platform_set_drvdata(pdev, NULL);
+
+	return 0;
+}
+
+static const struct of_device_id mcs814x_rng_ids[] = {
+	{ .compatible = "moschip,mcs814x-rng", },
+	{ /* sentinel */ },
+};
+
+static struct platform_driver mcs814x_rng_driver = {
+	.driver	= {
+		.name	= "mcs814x-rng",
+		.owner	= THIS_MODULE,
+		.of_match_table = mcs814x_rng_ids,
+	},
+	.probe	= mcs814x_rng_probe,
+	.remove	= mcs814x_rng_remove,
+};
+
+module_platform_driver(mcs814x_rng_driver);
+
+MODULE_AUTHOR("Florian Fainelli <florian@openwrt.org>");
+MODULE_DESCRIPTION("H/W Random Number Generator (RNG) for Moschip MCS814x");
+MODULE_LICENSE("GPL");
diff --git a/target/linux/mcs814x/files-3.18/drivers/gpio/gpio-mcs814x.c b/target/linux/mcs814x/files-3.18/drivers/gpio/gpio-mcs814x.c
new file mode 100644
index 0000000..c8a6509
--- /dev/null
+++ b/target/linux/mcs814x/files-3.18/drivers/gpio/gpio-mcs814x.c
@@ -0,0 +1,148 @@
+/*
+ * Moschip MCS814x GPIO support
+ *
+ * Copyright (C) 2012, Florian Fainelli <florian@openwrt.org>
+ *
+ * Licensed under the GPLv2
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+
+struct mcs814x_gpio_chip {
+	void __iomem *regs;
+	struct gpio_chip chip;
+};
+
+#define GPIO_PIN	0x00
+#define GPIO_DIR	0x04
+
+#define to_mcs814x_gpio_chip(x)	container_of(x, struct mcs814x_gpio_chip, chip)
+
+static int mcs814x_gpio_get(struct gpio_chip *chip, unsigned offset)
+{
+	struct mcs814x_gpio_chip *mcs814x = to_mcs814x_gpio_chip(chip);
+
+	return readl_relaxed(mcs814x->regs + GPIO_PIN) & (1 << offset);
+}
+
+static void mcs814x_gpio_set(struct gpio_chip *chip,
+				unsigned offset, int value)
+{
+	struct mcs814x_gpio_chip *mcs814x = to_mcs814x_gpio_chip(chip);
+	u32 mask;
+
+	mask = readl_relaxed(mcs814x->regs + GPIO_PIN);
+	if (value)
+		mask |= (1 << offset);
+	else
+		mask &= ~(1 << offset);
+	writel_relaxed(mask, mcs814x->regs + GPIO_PIN);
+}
+
+static int mcs814x_gpio_direction_output(struct gpio_chip *chip,
+					unsigned offset, int value)
+{
+	struct mcs814x_gpio_chip *mcs814x = to_mcs814x_gpio_chip(chip);
+	u32 mask;
+
+	mask = readl_relaxed(mcs814x->regs + GPIO_DIR);
+	mask &= ~(1 << offset);
+	writel_relaxed(mask, mcs814x->regs + GPIO_DIR);
+
+	return 0;
+}
+
+static int mcs814x_gpio_direction_input(struct gpio_chip *chip,
+					unsigned offset)
+{
+	struct mcs814x_gpio_chip *mcs814x = to_mcs814x_gpio_chip(chip);
+	u32 mask;
+
+	mask = readl_relaxed(mcs814x->regs + GPIO_DIR);
+	mask |= (1 << offset);
+	writel_relaxed(mask, mcs814x->regs + GPIO_DIR);
+
+	return 0;
+}
+
+static int mcs814x_gpio_probe(struct platform_device *pdev)
+{
+	struct resource *res;
+	struct mcs814x_gpio_chip *mcs814x_chip;
+	int ret;
+	const unsigned int *num_gpios;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res)
+		return -ENODEV;
+
+	num_gpios = of_get_property(pdev->dev.of_node, "num-gpios", NULL);
+	if (!num_gpios)
+		dev_err(&pdev->dev, "FIXME: no num-gpios property\n");
+
+	mcs814x_chip = kzalloc(sizeof(*mcs814x_chip), GFP_KERNEL);
+	if (!mcs814x_chip)
+		return -ENOMEM;
+
+	mcs814x_chip->regs = devm_ioremap_resource(&pdev->dev, res);
+	if (!mcs814x_chip->regs) {
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	platform_set_drvdata(pdev, mcs814x_chip);
+
+#ifdef CONFIG_OF_GPIO
+	mcs814x_chip->chip.of_node = pdev->dev.of_node;
+#endif
+
+	mcs814x_chip->chip.label = pdev->name;
+	mcs814x_chip->chip.get = mcs814x_gpio_get;
+	mcs814x_chip->chip.set = mcs814x_gpio_set;
+	mcs814x_chip->chip.direction_input = mcs814x_gpio_direction_input;
+	mcs814x_chip->chip.direction_output = mcs814x_gpio_direction_output;
+	mcs814x_chip->chip.ngpio = be32_to_cpup(num_gpios);
+	/* we want dynamic base allocation */
+	mcs814x_chip->chip.base = -1;
+
+	ret = gpiochip_add(&mcs814x_chip->chip);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to register gpiochip\n");
+		goto out;
+	}
+
+	return 0;
+
+out:
+	platform_set_drvdata(pdev, NULL);
+	kfree(mcs814x_chip);
+	return ret;
+}
+
+static struct of_device_id mcs814x_gpio_ids[] = {
+	{ .compatible = "moschip,mcs814x-gpio" },
+	{ /* sentinel */ },
+};
+
+static struct platform_driver mcs814x_gpio_driver = {
+	.driver	= {
+		.name	= "mcs814x-gpio",
+		.owner	= THIS_MODULE,
+		.of_match_table = mcs814x_gpio_ids,
+	},
+	.probe	= mcs814x_gpio_probe,
+};
+
+int __init mcs814x_gpio_init(void)
+{
+	return platform_driver_register(&mcs814x_gpio_driver);
+}
+postcore_initcall(mcs814x_gpio_init);
diff --git a/target/linux/mcs814x/files-3.18/drivers/net/ethernet/mcs8140/Kconfig b/target/linux/mcs814x/files-3.18/drivers/net/ethernet/mcs8140/Kconfig
new file mode 100644
index 0000000..8fa38a4
--- /dev/null
+++ b/target/linux/mcs814x/files-3.18/drivers/net/ethernet/mcs8140/Kconfig
@@ -0,0 +1,4 @@
+config  NUPORT_ETHERNET_DRIVER
+	tristate "MCS8140 Ethernet driver"
+	depends on ETHERNET && ARCH_MCS814X
+          help
diff --git a/target/linux/mcs814x/files-3.18/drivers/net/ethernet/mcs8140/Makefile b/target/linux/mcs814x/files-3.18/drivers/net/ethernet/mcs8140/Makefile
new file mode 100644
index 0000000..9719c51
--- /dev/null
+++ b/target/linux/mcs814x/files-3.18/drivers/net/ethernet/mcs8140/Makefile
@@ -0,0 +1,3 @@
+obj-$(CONFIG_NUPORT_ETHERNET_DRIVER)   += mcs8140.o
+
+mcs8140-objs  := nuport_mac.o 
diff --git a/target/linux/mcs814x/files-3.18/drivers/net/ethernet/mcs8140/nuport_mac.c b/target/linux/mcs814x/files-3.18/drivers/net/ethernet/mcs8140/nuport_mac.c
new file mode 100644
index 0000000..a02144e
--- /dev/null
+++ b/target/linux/mcs814x/files-3.18/drivers/net/ethernet/mcs8140/nuport_mac.c
@@ -0,0 +1,1206 @@
+/*
+ * Moschip MCS8140 Ethernet MAC driver
+ *
+ * Copyright (C) 2003, Moschip Semiconductors
+ * Copyright (C) 2012, Florian Fainelli <florian@openwrt.org>
+ *
+ * Licensed under GPLv2
+ */
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/delay.h>
+#include <linux/ethtool.h>
+#include <linux/mii.h>
+#include <linux/io.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/of.h>
+#include <linux/of_mdio.h>
+#include <linux/of_net.h>
+#include <linux/irq.h>
+#include <linux/err.h>
+#include <linux/phy.h>
+#include <linux/clk.h>
+#include <linux/dma-mapping.h>
+
+#include <asm/unaligned.h>
+#include <asm/sizes.h>
+
+/* Hardware registers */
+#define MAC_BASE_ADDR		((priv->mac_base))
+
+#define CTRL_REG		(MAC_BASE_ADDR)
+#define  MII_BUSY		(1 << 0)
+#define  MII_WRITE		(1 << 1)
+#define  RX_ENABLE		(1 << 2)
+#define  TX_ENABLE		(1 << 3)
+#define  DEFER_CHECK		(1 << 5)
+#define  STRIP_PAD		(1 << 8)
+#define  DRTRY_DISABLE		(1 << 10)
+#define  FULL_DUPLEX		(1 << 20)
+#define  HBD_DISABLE		(1 << 28)
+#define MAC_ADDR_HIGH_REG	(MAC_BASE_ADDR + 0x04)
+#define MAC_ADDR_LOW_REG	(MAC_BASE_ADDR + 0x08)
+#define MII_ADDR_REG		(MAC_BASE_ADDR + 0x14)
+#define  MII_ADDR_SHIFT		(11)
+#define  MII_REG_SHIFT		(6)
+#define MII_DATA_REG		(MAC_BASE_ADDR + 0x18)
+/* Link interrupt registers */
+#define LINK_INT_CSR		(MAC_BASE_ADDR + 0xD0)
+#define  LINK_INT_EN		(1 << 0)
+#define  LINK_PHY_ADDR_SHIFT	(1)
+#define  LINK_PHY_REG_SHIFT	(6)
+#define  LINK_BIT_UP_SHIFT	(11)
+#define  LINK_UP		(1 << 16)
+#define LINK_INT_POLL_TIME	(MAC_BASE_ADDR + 0xD4)
+#define  LINK_POLL_MASK		((1 << 20) - 1)
+
+#define DMA_CHAN_WIDTH		32
+#define DMA_RX_CHAN		0
+#define DMA_TX_CHAN		2
+
+/* Receive DMA registers */
+#define RX_DMA_BASE		((priv->dma_base) + \
+				(DMA_CHAN_WIDTH * DMA_RX_CHAN))
+#define RX_BUFFER_ADDR		(RX_DMA_BASE + 0x00)
+#define RX_MAX_BYTES		(RX_DMA_BASE + 0x04)
+#define RX_ACT_BYTES		(RX_DMA_BASE + 0x08)
+#define RX_START_DMA		(RX_DMA_BASE + 0x0C)
+#define  RX_DMA_ENABLE		(1 << 0)
+#define  RX_DMA_RESET		(1 << 1)
+#define  RX_DMA_STATUS_FIFO	(1 << 12)
+#define RX_DMA_ENH		(RX_DMA_BASE + 0x14)
+#define  RX_DMA_INT_ENABLE	(1 << 1)
+
+/* Transmit DMA registers */
+#define TX_DMA_BASE		((priv->dma_base) + \
+				(DMA_CHAN_WIDTH * DMA_TX_CHAN))
+#define TX_BUFFER_ADDR		(TX_DMA_BASE + 0x00)
+#define TX_PKT_BYTES		(TX_DMA_BASE + 0x04)
+#define TX_BYTES_SENT		(TX_DMA_BASE + 0x08)
+#define TX_START_DMA		(TX_DMA_BASE + 0x0C)
+#define  TX_DMA_ENABLE		(1 << 0)
+#define  TX_DMA_START_FRAME	(1 << 2)
+#define  TX_DMA_END_FRAME	(1 << 3)
+#define  TX_DMA_PAD_DISABLE	(1 << 8)
+#define  TX_DMA_CRC_DISABLE	(1 << 9)
+#define  TX_DMA_FIFO_FULL	(1 << 16)
+#define  TX_DMA_FIFO_EMPTY	(1 << 17)
+#define  TX_DMA_STATUS_AVAIL	(1 << 18)
+#define  TX_DMA_RESET		(1 << 24)
+#define TX_DMA_STATUS		(TX_DMA_BASE + 0x10)
+#define TX_DMA_ENH		(TX_DMA_BASE + 0x14)
+#define  TX_DMA_ENH_ENABLE	(1 << 0)
+#define  TX_DMA_INT_FIFO	(1 << 1)
+
+#define RX_ALLOC_SIZE		SZ_2K
+#define MAX_ETH_FRAME_SIZE	1536
+#define RX_SKB_TAILROOM		128
+#define RX_SKB_HEADROOM		(RX_ALLOC_SIZE  - \
+				(MAX_ETH_FRAME_SIZE + RX_SKB_TAILROOM) + 0)
+
+			/* WDT     Late COL    Lenght     COL      Type */
+#define ERROR_FILTER_MASK ((1<<14) | (1<<15) | (1<<16) | (1<<17) | (0<<18) | \
+			/* MII    Dribbling    CRC    Len/type   Control */\
+			(1<<19) | (1<<20) | (1<<21) | (0<<24) | (1<<25) | \
+			/* Unsup   Missed */\
+			(1<<26) | (0<<31))
+#define  TX_RING_SIZE  30
+#define  RX_RING_SIZE  30
+
+static inline u32 nuport_mac_readl(void __iomem *reg)
+{
+	return readl_relaxed(reg);
+}
+
+static inline u8 nuport_mac_readb(void __iomem *reg)
+{
+	return readb_relaxed(reg);
+}
+
+static inline void nuport_mac_writel(u32 value, void __iomem *reg)
+{
+	writel_relaxed(value, reg);
+}
+
+static inline void nuport_mac_writeb(u8 value, void __iomem *reg)
+{
+	writel_relaxed(value, reg);
+}
+
+/* MAC private data */
+struct nuport_mac_priv {
+	spinlock_t lock;
+
+	void __iomem	*mac_base;
+	void __iomem	*dma_base;
+
+	int		rx_irq;
+	int		tx_irq;
+	int		link_irq;
+	struct clk	*emac_clk;
+	struct clk	*ephy_clk;
+
+	/* Transmit buffers */
+	struct sk_buff *tx_skb[TX_RING_SIZE];
+	dma_addr_t tx_addr;
+	unsigned int valid_txskb[TX_RING_SIZE];
+	unsigned int cur_tx;
+	unsigned int dma_tx;
+	unsigned int tx_full;
+
+	/* Receive buffers */
+	struct sk_buff *rx_skb[RX_RING_SIZE];
+	dma_addr_t rx_addr;
+	unsigned int irq_rxskb[RX_RING_SIZE];
+	int pkt_len[RX_RING_SIZE];
+	unsigned int cur_rx;
+	unsigned int dma_rx;
+	unsigned int rx_full;
+
+	unsigned int first_pkt;
+
+	/* Private data */
+	struct napi_struct napi;
+	struct net_device	*dev;
+	struct platform_device	*pdev;
+	struct mii_bus		*mii_bus;
+	struct phy_device	*phydev;
+	struct device_node	*phy_node;
+	phy_interface_t		phy_interface;
+	int			old_link;
+	int			old_duplex;
+	u32			msg_level;
+	unsigned int		buffer_shifting_len;
+};
+
+static inline int nuport_mac_mii_busy_wait(struct nuport_mac_priv *priv)
+{
+	unsigned long curr;
+	unsigned long finish = jiffies + 3 * HZ;
+
+	do {
+		curr = jiffies;
+		if (!(nuport_mac_readl(MII_ADDR_REG) & MII_BUSY))
+			return 0;
+		cpu_relax();
+	} while (!time_after_eq(curr, finish));
+
+	return -EBUSY;
+}
+
+/* Read from PHY registers */
+static int nuport_mac_mii_read(struct mii_bus *bus,
+				int mii_id, int regnum)
+{
+	struct net_device *dev = bus->priv;
+	struct nuport_mac_priv *priv = netdev_priv(dev);
+	int ret;
+	u32 val = 0;
+
+	ret = nuport_mac_mii_busy_wait(priv);
+	if (ret)
+		return ret;
+
+	val |= (mii_id << MII_ADDR_SHIFT) | (regnum << MII_REG_SHIFT) | MII_BUSY;
+	nuport_mac_writel(val, MII_ADDR_REG);
+	ret = nuport_mac_mii_busy_wait(priv);
+	if (ret)
+		return ret;
+
+	return nuport_mac_readl(MII_DATA_REG);
+}
+
+static int nuport_mac_mii_write(struct mii_bus *bus, int mii_id,
+				int regnum, u16 value)
+{
+	struct net_device *dev = bus->priv;
+	struct nuport_mac_priv *priv = netdev_priv(dev);
+	int ret;
+	u32 val = 0;
+
+	ret = nuport_mac_mii_busy_wait(priv);
+	if (ret)
+		return ret;
+
+	val |= (mii_id << MII_ADDR_SHIFT) | (regnum << MII_REG_SHIFT);
+	val |= MII_BUSY | MII_WRITE;
+	nuport_mac_writel(value, MII_DATA_REG);
+	nuport_mac_writel(val, MII_ADDR_REG);
+
+	return nuport_mac_mii_busy_wait(priv);
+}
+
+static int nuport_mac_mii_reset(struct mii_bus *bus)
+{
+	return 0;
+}
+
+static int nuport_mac_start_tx_dma(struct nuport_mac_priv *priv,
+					struct sk_buff *skb)
+{
+	u32 reg;
+	unsigned int timeout = 2048;
+
+	while (timeout--) {
+		reg = nuport_mac_readl(TX_START_DMA);
+		if (!(reg & TX_DMA_ENABLE)) {
+			netdev_dbg(priv->dev, "dma ready\n");
+			break;
+		}
+		cpu_relax();
+	}
+
+	if (!timeout)
+		return -EBUSY;
+
+	priv->tx_addr = dma_map_single(&priv->pdev->dev, skb->data,
+			skb->len, DMA_TO_DEVICE);
+	if (dma_mapping_error(&priv->pdev->dev, priv->tx_addr))
+		return -ENOMEM;
+
+	/* enable enhanced mode */
+	nuport_mac_writel(TX_DMA_ENH_ENABLE, TX_DMA_ENH);
+	nuport_mac_writel(priv->tx_addr, TX_BUFFER_ADDR);
+	nuport_mac_writel((skb->len) - 1, TX_PKT_BYTES);
+	wmb();
+	reg = TX_DMA_ENABLE | TX_DMA_START_FRAME | TX_DMA_END_FRAME;
+	nuport_mac_writel(reg, TX_START_DMA);
+
+	return 0;
+}
+
+static void nuport_mac_reset_tx_dma(struct nuport_mac_priv *priv)
+{
+	u32 reg;
+
+	reg = nuport_mac_readl(TX_START_DMA);
+	reg |= TX_DMA_RESET;
+	nuport_mac_writel(reg, TX_START_DMA);
+}
+
+static int nuport_mac_start_rx_dma(struct nuport_mac_priv *priv,
+					struct sk_buff *skb)
+{
+	u32 reg;
+	unsigned int timeout = 2048;
+
+	while (timeout--) {
+		reg = nuport_mac_readl(RX_START_DMA);
+		if (!(reg & RX_DMA_ENABLE)) {
+			netdev_dbg(priv->dev, "dma ready\n");
+			break;
+		}
+		cpu_relax();
+	}
+
+	if (!timeout)
+		return -EBUSY;
+
+	priv->rx_addr = dma_map_single(&priv->pdev->dev, skb->data,
+				RX_ALLOC_SIZE, DMA_FROM_DEVICE);
+	if (dma_mapping_error(&priv->pdev->dev, priv->rx_addr))
+		return -ENOMEM;
+
+	nuport_mac_writel(priv->rx_addr, RX_BUFFER_ADDR);
+	wmb();
+	nuport_mac_writel(RX_DMA_ENABLE, RX_START_DMA);
+
+	return 0;
+}
+
+static void nuport_mac_reset_rx_dma(struct nuport_mac_priv *priv)
+{
+	u32 reg;
+
+	reg = nuport_mac_readl(RX_START_DMA);
+	reg |= RX_DMA_RESET;
+	nuport_mac_writel(reg, RX_START_DMA);
+}
+
+/* I suppose this might do something, but I am not sure actually */
+static void nuport_mac_disable_rx_dma(struct nuport_mac_priv *priv)
+{
+	u32 reg;
+
+	reg = nuport_mac_readl(RX_DMA_ENH);
+	reg &= ~RX_DMA_INT_ENABLE;
+	nuport_mac_writel(reg, RX_DMA_ENH);
+}
+
+static void nuport_mac_enable_rx_dma(struct nuport_mac_priv *priv)
+{
+	u32 reg;
+
+	reg = nuport_mac_readl(RX_DMA_ENH);
+	reg |= RX_DMA_INT_ENABLE;
+	nuport_mac_writel(reg, RX_DMA_ENH);
+}
+
+/* Add packets to the transmit queue */
+static int nuport_mac_start_xmit(struct sk_buff *skb, struct net_device *dev)
+{
+	unsigned long flags;
+	struct nuport_mac_priv *priv = netdev_priv(dev);
+	int ret;
+
+	if (netif_queue_stopped(dev)) {
+		netdev_warn(dev, "netif queue was stopped, restarting\n");
+		netif_start_queue(dev);
+	}
+
+	spin_lock_irqsave(&priv->lock, flags);
+	if (priv->first_pkt) {
+		ret = nuport_mac_start_tx_dma(priv, skb);
+		if (ret) {
+			netif_stop_queue(dev);
+			spin_unlock_irqrestore(&priv->lock, flags);
+			netdev_err(dev, "transmit path busy\n");
+			return NETDEV_TX_BUSY;
+		}
+		priv->first_pkt = 0;
+	}
+
+	priv->tx_skb[priv->cur_tx] = skb;
+	dev->stats.tx_bytes += skb->len;
+	dev->stats.tx_packets++;
+	priv->valid_txskb[priv->cur_tx] = 1;
+	priv->cur_tx++;
+	dev->trans_start = jiffies;
+
+	if (priv->cur_tx >= TX_RING_SIZE)
+		priv->cur_tx = 0;
+
+	spin_unlock_irqrestore(&priv->lock, flags);
+
+	if (priv->valid_txskb[priv->cur_tx]) {
+		priv->tx_full = 1;
+		netdev_err(dev, "stopping queue\n");
+		netif_stop_queue(dev);
+	}
+
+	return NETDEV_TX_OK;
+}
+
+static void nuport_mac_adjust_link(struct net_device *dev)
+{
+	struct nuport_mac_priv *priv = netdev_priv(dev);
+	struct phy_device *phydev = priv->phydev;
+	unsigned int status_changed = 0;
+	u32 reg;
+
+	BUG_ON(!phydev);
+
+	if (priv->old_link != phydev->link) {
+		status_changed = 1;
+		priv->old_link = phydev->link;
+	}
+
+	if (phydev->link && (priv->old_duplex != phydev->duplex)) {
+		reg = nuport_mac_readl(CTRL_REG);
+		if (phydev->duplex == DUPLEX_FULL)
+			reg |= DUPLEX_FULL;
+		else
+			reg &= ~DUPLEX_FULL;
+		nuport_mac_writel(reg, CTRL_REG);
+
+		status_changed = 1;
+		priv->old_duplex = phydev->duplex;
+	}
+
+	if (!status_changed)
+		return;
+
+	pr_info("%s: link %s", dev->name, phydev->link ?
+		"UP" : "DOWN");
+	if (phydev->link) {
+		pr_cont(" - %d/%s", phydev->speed,
+		phydev->duplex == DUPLEX_FULL ? "full" : "half");
+	}
+	pr_cont("\n");
+}
+
+static irqreturn_t nuport_mac_link_interrupt(int irq, void *dev_id)
+{
+	struct net_device *dev = dev_id;
+	struct nuport_mac_priv *priv = netdev_priv(dev);
+	u32 reg;
+	u8 phy_addr;
+	unsigned long flags;
+	irqreturn_t ret = IRQ_HANDLED;
+
+	spin_lock_irqsave(&priv->lock, flags);
+	reg = nuport_mac_readl(LINK_INT_CSR);
+	phy_addr = (reg >> LINK_PHY_ADDR_SHIFT) & (PHY_MAX_ADDR - 1);
+
+	if (phy_addr != priv->phydev->addr) {
+		netdev_err(dev, "spurious PHY irq (phy: %d)\n", phy_addr);
+		ret = IRQ_NONE;
+		goto out;
+	}
+
+	priv->phydev->link = (reg & LINK_UP);
+	nuport_mac_adjust_link(dev);
+
+out:
+	spin_unlock_irqrestore(&priv->lock, flags);
+	return ret;
+}
+
+static irqreturn_t nuport_mac_tx_interrupt(int irq, void *dev_id)
+{
+	struct net_device *dev = (struct net_device *)dev_id;
+	struct nuport_mac_priv *priv = netdev_priv(dev);
+	struct sk_buff *skb;
+	unsigned long flags;
+	int ret;
+	u32 reg;
+
+	spin_lock_irqsave(&priv->lock, flags);
+	/* clear status word available if ready */
+	reg = nuport_mac_readl(TX_START_DMA);
+	if (reg & TX_DMA_STATUS_AVAIL) {
+		nuport_mac_writel(reg, TX_START_DMA);
+		reg = nuport_mac_readl(TX_DMA_STATUS);
+
+		if (reg & 1)
+			dev->stats.tx_errors++;
+	} else
+		netdev_dbg(dev, "no status word: %08x\n", reg);
+
+	skb = priv->tx_skb[priv->dma_tx];
+	priv->tx_skb[priv->dma_tx] = NULL;
+	priv->valid_txskb[priv->dma_tx] = 0;
+	dma_unmap_single(&priv->pdev->dev, priv->rx_addr, skb->len,
+				DMA_TO_DEVICE);
+	dev_kfree_skb_irq(skb);
+
+	priv->dma_tx++;
+	if (priv->dma_tx >= TX_RING_SIZE)
+		priv->dma_tx = 0;
+
+	if (!priv->valid_txskb[priv->dma_tx])
+		priv->first_pkt = 1;
+	else {
+		ret = nuport_mac_start_tx_dma(priv, priv->tx_skb[priv->dma_tx]);
+		if (ret)
+			netdev_err(dev, "failed to restart TX dma\n");
+	}
+
+	if (priv->tx_full) {
+		netdev_dbg(dev, "restarting transmit queue\n");
+		netif_wake_queue(dev);
+		priv->tx_full = 0;
+	}
+
+	spin_unlock_irqrestore(&priv->lock, flags);
+
+	return IRQ_HANDLED;
+}
+
+static unsigned int nuport_mac_has_work(struct nuport_mac_priv *priv)
+{
+	unsigned int i;
+
+	for (i = 0; i < RX_RING_SIZE; i++)
+		if (priv->rx_skb[i])
+			return 1;
+
+	return 0;
+}
+
+static irqreturn_t nuport_mac_rx_interrupt(int irq, void *dev_id)
+{
+	struct net_device *dev = (struct net_device *)dev_id;
+	struct nuport_mac_priv *priv = netdev_priv(dev);
+	unsigned long flags;
+	int ret;
+
+	spin_lock_irqsave(&priv->lock, flags);
+	if (!priv->rx_full) {
+		priv->pkt_len[priv->dma_rx] = nuport_mac_readl(RX_ACT_BYTES) - 4;
+		priv->irq_rxskb[priv->dma_rx] = 0;
+		priv->dma_rx++;
+
+		if (priv->dma_rx >= RX_RING_SIZE)
+			priv->dma_rx = 0;
+	} else
+		priv->rx_full = 0;
+
+	if (priv->irq_rxskb[priv->dma_rx] == 1) {
+		ret = nuport_mac_start_rx_dma(priv, priv->rx_skb[priv->dma_rx]);
+		if (ret)
+			netdev_err(dev, "failed to start rx dma\n");
+	} else {
+		priv->rx_full = 1;
+		netdev_dbg(dev, "RX ring full\n");
+	}
+
+	if (likely(nuport_mac_has_work(priv))) {
+		/* find a way to disable DMA rx irq */
+		nuport_mac_disable_rx_dma(priv);
+		napi_schedule(&priv->napi);
+	}
+	spin_unlock_irqrestore(&priv->lock, flags);
+
+	return IRQ_HANDLED;
+}
+
+/* Process received packets in tasklet */
+static int nuport_mac_rx(struct net_device *dev, int limit)
+{
+	struct nuport_mac_priv *priv = netdev_priv(dev);
+	struct sk_buff *skb;
+	int len, status;
+	int count = 0;
+
+	while (count < limit && !priv->irq_rxskb[priv->cur_rx]) {
+		skb = priv->rx_skb[priv->cur_rx];
+		len = priv->pkt_len[priv->cur_rx];
+
+		/* Remove 2 bytes added by RX buffer shifting */
+		len = len - priv->buffer_shifting_len;
+		skb->data = skb->data + priv->buffer_shifting_len;
+
+		/* Get packet status */
+		status = get_unaligned((u32 *) (skb->data + len));
+
+		dma_unmap_single(&priv->pdev->dev, priv->rx_addr, skb->len,
+				DMA_FROM_DEVICE);
+
+		/* packet filter failed */
+		if (!(status & (1 << 30))) {
+			dev_kfree_skb_irq(skb);
+			goto exit;
+		}
+
+		/* missed frame */
+		if (status & (1 << 31)) {
+			dev->stats.rx_missed_errors++;
+			dev_kfree_skb_irq(skb);
+			goto exit;
+		}
+
+		/* Not ethernet type */
+		if ((!(status & (1 << 18))) || (status & ERROR_FILTER_MASK))
+			dev->stats.rx_errors++;
+
+		if (len > MAX_ETH_FRAME_SIZE) {
+			dev_kfree_skb_irq(skb);
+			goto exit;
+		} else
+			skb_put(skb, len);
+
+		skb->protocol = eth_type_trans(skb, dev);
+		dev->stats.rx_packets++;
+
+		if (status & (1 << 29))
+			skb->pkt_type = PACKET_OTHERHOST;
+		if (status & (1 << 27))
+			skb->pkt_type = PACKET_MULTICAST;
+		if (status & (1 << 28))
+			skb->pkt_type = PACKET_BROADCAST;
+
+		skb->ip_summed = CHECKSUM_UNNECESSARY;
+
+		/* Pass the received packet to network layer */
+		status = netif_receive_skb(skb);
+		if (status != NET_RX_DROP)
+			dev->stats.rx_bytes += len - 4;	/* Without CRC */
+		else
+			dev->stats.rx_dropped++;
+
+		dev->last_rx = jiffies;
+
+exit:
+		skb = netdev_alloc_skb(dev, RX_ALLOC_SIZE);
+		if (!skb)
+			goto out;
+
+		skb_reserve(skb, RX_SKB_HEADROOM);
+		priv->rx_skb[priv->cur_rx] = skb;
+		priv->irq_rxskb[priv->cur_rx] = 1;
+		priv->cur_rx++;
+
+		if (priv->cur_rx >= RX_RING_SIZE)
+			priv->cur_rx = 0;
+		count++;
+	}
+out:
+	return count;
+}
+
+static int nuport_mac_poll(struct napi_struct *napi, int budget)
+{
+	struct nuport_mac_priv *priv =
+		container_of(napi, struct nuport_mac_priv, napi);
+	struct net_device *dev = priv->dev;
+	int work_done;
+
+	work_done = nuport_mac_rx(dev, budget);
+
+	if (work_done < budget) {
+		napi_complete(napi);
+		nuport_mac_enable_rx_dma(priv);
+	}
+
+	return work_done;
+}
+
+static void nuport_mac_init_tx_ring(struct nuport_mac_priv *priv)
+{
+	int i;
+
+	priv->cur_tx = priv->dma_tx = priv->tx_full = 0;
+	for (i = 0; i < TX_RING_SIZE; i++) {
+		priv->tx_skb[i] = NULL;
+		priv->valid_txskb[i] = 0;
+	}
+	priv->first_pkt = 1;
+}
+
+static int nuport_mac_init_rx_ring(struct net_device *dev)
+{
+	struct nuport_mac_priv *priv = netdev_priv(dev);
+	struct sk_buff *skb;
+	int i;
+
+	priv->cur_rx = priv->dma_rx = priv->rx_full = 0;
+
+	for (i = 0; i < RX_RING_SIZE; i++) {
+		skb = netdev_alloc_skb(dev, RX_ALLOC_SIZE);
+		if (!skb)
+			return -ENOMEM;
+		skb_reserve(skb, RX_SKB_HEADROOM);
+		priv->rx_skb[i] = skb;
+		priv->irq_rxskb[i] = 1;
+	}
+
+	return 0;
+}
+
+static void nuport_mac_free_rx_ring(struct nuport_mac_priv *priv)
+{
+	int i;
+
+	for (i = 0; i < RX_RING_SIZE; i++) {
+		if (!priv->rx_skb[i])
+			continue;
+
+		dev_kfree_skb(priv->rx_skb[i]);
+		priv->rx_skb[i] = NULL;
+	}
+
+	if (priv->rx_addr)
+		dma_unmap_single(&priv->pdev->dev, priv->rx_addr, RX_ALLOC_SIZE,
+				DMA_TO_DEVICE);
+}
+
+static void nuport_mac_read_mac_address(struct net_device *dev)
+{
+	struct nuport_mac_priv *priv = netdev_priv(dev);
+	int i;
+
+	for (i = 0; i < 4; i++)
+		dev->dev_addr[i] = nuport_mac_readb(MAC_ADDR_LOW_REG + i);
+	dev->dev_addr[4] = nuport_mac_readb(MAC_ADDR_HIGH_REG);
+	dev->dev_addr[5] = nuport_mac_readb(MAC_ADDR_HIGH_REG + 1);
+
+	if (!is_valid_ether_addr(dev->dev_addr)) {
+		dev_info(&priv->pdev->dev, "using random address\n");
+		random_ether_addr(dev->dev_addr);
+	}
+}
+
+static int nuport_mac_change_mac_address(struct net_device *dev, void *mac_addr)
+{
+	struct sockaddr *addr = mac_addr;
+	struct nuport_mac_priv *priv = netdev_priv(dev);
+	unsigned long *temp = (unsigned long *)dev->dev_addr;
+	u32 high, low;
+
+	if (netif_running(dev))
+		return -EBUSY;
+
+	memcpy(dev->dev_addr, addr->sa_data, ETH_ALEN);
+
+	spin_lock_irq(&priv->lock);
+
+	nuport_mac_writel(*temp, MAC_ADDR_LOW_REG);
+	temp = (unsigned long *)(dev->dev_addr + 4);
+	nuport_mac_writel(*temp, MAC_ADDR_HIGH_REG);
+
+	low = nuport_mac_readl(MAC_ADDR_LOW_REG);
+	high = nuport_mac_readl(MAC_ADDR_HIGH_REG);
+
+	spin_unlock_irq(&priv->lock);
+
+	return 0;
+}
+
+static int nuport_mac_open(struct net_device *dev)
+{
+	int ret;
+	struct nuport_mac_priv *priv = netdev_priv(dev);
+	unsigned long flags;
+	u32 reg = 0;
+
+	ret = clk_enable(priv->emac_clk);
+	if (ret) {
+		netdev_err(dev, "failed to enable EMAC clock\n");
+		return ret;
+	}
+
+	/* Set MAC into full duplex mode by default */
+	reg |= RX_ENABLE | TX_ENABLE;
+	reg |= DEFER_CHECK | STRIP_PAD | DRTRY_DISABLE;
+	reg |= FULL_DUPLEX | HBD_DISABLE;
+	nuport_mac_writel(reg, CTRL_REG);
+
+	/* set mac address in hardware in case it was not already */
+	nuport_mac_change_mac_address(dev, dev->dev_addr);
+
+	ret = request_irq(priv->link_irq, &nuport_mac_link_interrupt,
+				0, dev->name, dev);
+	if (ret) {
+		netdev_err(dev, "unable to request link interrupt\n");
+		goto out_emac_clk;
+	}
+
+	ret = request_irq(priv->tx_irq, &nuport_mac_tx_interrupt,
+				0, dev->name, dev);
+	if (ret) {
+		netdev_err(dev, "unable to request rx interrupt\n");
+		goto out_link_irq;
+	}
+
+	/* Enable link interrupt monitoring for our PHY address */
+	reg = LINK_INT_EN | (priv->phydev->addr << LINK_PHY_ADDR_SHIFT);
+	/* MII_BMSR register to be watched */
+	reg |= (1 << LINK_PHY_REG_SHIFT);
+	/* BMSR_STATUS to be watched in particular */
+	reg |= (2 << LINK_BIT_UP_SHIFT);
+
+	spin_lock_irqsave(&priv->lock, flags);
+	nuport_mac_writel(reg, LINK_INT_CSR);
+	nuport_mac_writel(LINK_POLL_MASK, LINK_INT_POLL_TIME);
+	spin_unlock_irqrestore(&priv->lock, flags);
+
+	phy_start(priv->phydev);
+
+	ret = request_irq(priv->rx_irq, &nuport_mac_rx_interrupt,
+				0, dev->name, dev);
+	if (ret) {
+		netdev_err(dev, "unable to request tx interrupt\n");
+		goto out_tx_irq;
+	}
+
+	netif_start_queue(dev);
+
+	nuport_mac_init_tx_ring(priv);
+
+	ret = nuport_mac_init_rx_ring(dev);
+	if (ret) {
+		netdev_err(dev, "rx ring init failed\n");
+		goto out_rx_skb;
+	}
+
+	nuport_mac_reset_tx_dma(priv);
+	nuport_mac_reset_rx_dma(priv);
+
+	/* Start RX DMA */
+	spin_lock_irqsave(&priv->lock, flags);
+	ret = nuport_mac_start_rx_dma(priv, priv->rx_skb[0]);
+	spin_unlock_irqrestore(&priv->lock, flags);
+
+	napi_enable(&priv->napi);
+
+	return ret;
+
+out_rx_skb:
+	nuport_mac_free_rx_ring(priv);
+	free_irq(priv->rx_irq, dev);
+out_tx_irq:
+	free_irq(priv->tx_irq, dev);
+out_link_irq:
+	free_irq(priv->link_irq, dev);
+out_emac_clk:
+	clk_disable(priv->emac_clk);
+	return ret;
+}
+
+static int nuport_mac_close(struct net_device *dev)
+{
+	u32 reg;
+	struct nuport_mac_priv *priv = netdev_priv(dev);
+
+	spin_lock_irq(&priv->lock);
+	reg = nuport_mac_readl(CTRL_REG);
+	reg &= ~(RX_ENABLE | TX_ENABLE);
+	nuport_mac_writel(reg, CTRL_REG);
+
+	napi_disable(&priv->napi);
+	netif_stop_queue(dev);
+
+	free_irq(priv->link_irq, dev);
+	/* disable PHY polling */
+	nuport_mac_writel(0, LINK_INT_CSR);
+	nuport_mac_writel(0, LINK_INT_POLL_TIME);
+	phy_stop(priv->phydev);
+
+	free_irq(priv->tx_irq, dev);
+	free_irq(priv->rx_irq, dev);
+	spin_unlock_irq(&priv->lock);
+
+	nuport_mac_free_rx_ring(priv);
+
+	clk_disable(priv->emac_clk);
+
+	return 0;
+}
+
+static void nuport_mac_tx_timeout(struct net_device *dev)
+{
+	struct nuport_mac_priv *priv = netdev_priv(dev);
+	unsigned int i;
+
+	netdev_warn(dev, "transmit timeout, attempting recovery\n");
+
+	netdev_info(dev, "TX DMA regs\n");
+	for (i = 0; i < DMA_CHAN_WIDTH; i += 4)
+		netdev_info(dev, "[%02x]: 0x%08x\n", i, nuport_mac_readl(TX_DMA_BASE + i));
+	netdev_info(dev, "RX DMA regs\n");
+	for (i = 0; i < DMA_CHAN_WIDTH; i += 4)
+		netdev_info(dev, "[%02x]: 0x%08x\n", i, nuport_mac_readl(RX_DMA_BASE + i));
+
+	nuport_mac_init_tx_ring(priv);
+	nuport_mac_reset_tx_dma(priv);
+
+	netif_wake_queue(dev);
+}
+
+static int nuport_mac_mii_probe(struct net_device *dev)
+{
+	struct nuport_mac_priv *priv = netdev_priv(dev);
+	struct phy_device *phydev = NULL;
+	int ret;
+
+	ret = clk_enable(priv->ephy_clk);
+	if (ret) {
+		netdev_err(dev, "unable to enable ePHY clk\n");
+		return ret;
+	}
+
+	phydev = phy_find_first(priv->mii_bus);
+	if (!phydev) {
+		netdev_err(dev, "no PHYs found\n");
+		ret = -ENODEV;
+		goto out;
+	}
+
+	phydev = of_phy_connect(dev, priv->phy_node,
+			nuport_mac_adjust_link, 0,
+			priv->phy_interface);
+	if (IS_ERR(phydev)) {
+		netdev_err(dev, "could not attach PHY\n");
+		ret = PTR_ERR(phydev);
+		goto out;
+	}
+
+	phydev->supported &= PHY_BASIC_FEATURES;
+	phydev->advertising = phydev->supported;
+	priv->phydev = phydev;
+	priv->old_link = 1;
+	priv->old_duplex = DUPLEX_FULL;
+
+	dev_info(&priv->pdev->dev, "attached PHY driver [%s] "
+		"(mii_bus:phy_addr=%d)\n",
+		phydev->drv->name, phydev->addr);
+
+	return 0;
+
+out:
+	/* disable the Ethernet PHY clock for the moment */
+	clk_disable(priv->ephy_clk);
+
+	return ret;
+}
+
+static void nuport_mac_ethtool_drvinfo(struct net_device *dev,
+					struct ethtool_drvinfo *info)
+{
+	strncpy(info->driver, "nuport-mac", sizeof(info->driver));
+	strncpy(info->version, "0.1", sizeof(info->version));
+	strncpy(info->fw_version, "N/A", sizeof(info->fw_version));
+	strncpy(info->bus_info, "internal", sizeof(info->bus_info));
+	info->n_stats = 0;
+	info->testinfo_len = 0;
+	info->regdump_len = 0;
+	info->eedump_len = 0;
+}
+
+static int nuport_mac_ethtool_get_settings(struct net_device *dev,
+					struct ethtool_cmd *cmd)
+{
+	struct nuport_mac_priv *priv = netdev_priv(dev);
+
+	if (priv->phydev)
+		return phy_ethtool_gset(priv->phydev, cmd);
+
+	return -EINVAL;
+}
+
+static int nuport_mac_ethtool_set_settings(struct net_device *dev,
+					struct ethtool_cmd *cmd)
+{
+	struct nuport_mac_priv *priv = netdev_priv(dev);
+
+	if (priv->phydev)
+		return phy_ethtool_sset(priv->phydev, cmd);
+
+	return -EINVAL;
+}
+
+static void nuport_mac_set_msglevel(struct net_device *dev, u32 msg_level)
+{
+	struct nuport_mac_priv *priv = netdev_priv(dev);
+
+	priv->msg_level = msg_level;
+}
+
+static u32 nuport_mac_get_msglevel(struct net_device *dev)
+{
+	struct nuport_mac_priv *priv = netdev_priv(dev);
+
+	return priv->msg_level;
+}
+
+static const struct ethtool_ops nuport_mac_ethtool_ops = {
+	.get_drvinfo		= nuport_mac_ethtool_drvinfo,
+	.get_link		= ethtool_op_get_link,
+	.get_settings		= nuport_mac_ethtool_get_settings,
+	.set_settings		= nuport_mac_ethtool_set_settings,
+	.set_msglevel		= nuport_mac_set_msglevel,
+	.get_msglevel		= nuport_mac_get_msglevel,
+};
+
+static const struct net_device_ops nuport_mac_ops = {
+	.ndo_open		= nuport_mac_open,
+	.ndo_stop		= nuport_mac_close,
+	.ndo_start_xmit		= nuport_mac_start_xmit,
+	.ndo_change_mtu		= eth_change_mtu,
+	.ndo_validate_addr	= eth_validate_addr,
+	.ndo_set_mac_address	= nuport_mac_change_mac_address,
+	.ndo_tx_timeout		= nuport_mac_tx_timeout,
+};
+
+static int __init nuport_mac_probe(struct platform_device *pdev)
+{
+	struct net_device *dev;
+	struct nuport_mac_priv *priv = NULL;
+	struct resource *regs, *dma;
+	int ret = 0;
+	int rx_irq, tx_irq, link_irq;
+	int i;
+	const unsigned int *intspec;
+
+	dev = alloc_etherdev(sizeof(struct nuport_mac_priv));
+	if (!dev) {
+		dev_err(&pdev->dev, "no memory for net_device\n");
+		return -ENOMEM;
+	}
+
+	regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	dma = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+	if (!regs || !dma) {
+		dev_err(&pdev->dev, "failed to get regs resources\n");
+		ret = -ENODEV;
+		goto out;
+	}
+
+	rx_irq = platform_get_irq(pdev, 0);
+	tx_irq = platform_get_irq(pdev, 1);
+	link_irq = platform_get_irq(pdev, 2);
+	if (rx_irq < 0 || tx_irq < 0 || link_irq < 0) {
+		ret = -ENODEV;
+		goto out;
+	}
+
+	platform_set_drvdata(pdev, dev);
+	SET_NETDEV_DEV(dev, &pdev->dev);
+	priv = netdev_priv(dev);
+	priv->pdev = pdev;
+	priv->dev = dev;
+	spin_lock_init(&priv->lock);
+
+	intspec = of_get_property(pdev->dev.of_node,
+				"nuport-mac,buffer-shifting", NULL);
+	if (!intspec)
+		priv->buffer_shifting_len = 0;
+	else
+		priv->buffer_shifting_len = 2;
+
+	priv->mac_base = devm_ioremap_resource(&pdev->dev, regs);
+	if (!priv->mac_base) {
+		dev_err(&pdev->dev, "failed to remap regs\n");
+		ret = -ENOMEM;
+		goto out_platform;
+	}
+
+	priv->dma_base = devm_ioremap_resource(&pdev->dev, dma);
+	if (!priv->dma_base) {
+		dev_err(&pdev->dev, "failed to remap dma-regs\n");
+		ret = -ENOMEM;
+		goto out_platform;
+	}
+
+	priv->emac_clk = clk_get(&pdev->dev, "emac");
+	if (IS_ERR_OR_NULL(priv->emac_clk)) {
+		dev_err(&pdev->dev, "failed to get emac clk\n");
+		ret = PTR_ERR(priv->emac_clk);
+		goto out_platform;
+	}
+
+	priv->ephy_clk = clk_get(&pdev->dev, "ephy");
+	if (IS_ERR_OR_NULL(priv->ephy_clk)) {
+		dev_err(&pdev->dev, "failed to get ephy clk\n");
+		ret = PTR_ERR(priv->ephy_clk);
+		goto out_platform;
+	}
+
+	priv->link_irq = link_irq;
+	priv->rx_irq = rx_irq;
+	priv->tx_irq = tx_irq;
+	priv->msg_level = NETIF_MSG_DRV | NETIF_MSG_PROBE | NETIF_MSG_LINK;
+	dev->netdev_ops = &nuport_mac_ops;
+	dev->ethtool_ops = &nuport_mac_ethtool_ops;
+	dev->watchdog_timeo = HZ;
+	dev->flags = IFF_BROADCAST;	/* Supports Broadcast */
+	dev->tx_queue_len = TX_RING_SIZE / 2;
+
+	netif_napi_add(dev, &priv->napi, nuport_mac_poll, 64);
+
+	priv->phy_node = of_parse_phandle(pdev->dev.of_node, "phy", 0);
+	if (!priv->phy_node) {
+		dev_err(&pdev->dev, "no associated PHY\n");
+		ret = -ENODEV;
+		goto out;
+	}
+
+	priv->phy_interface = of_get_phy_mode(pdev->dev.of_node);
+	if (priv->phy_interface < 0) {
+		dev_err(&pdev->dev, "invalid PHY mode\n");
+		ret = -EINVAL;
+		goto out;
+	}
+
+	priv->mii_bus = mdiobus_alloc();
+	if (!priv->mii_bus) {
+		dev_err(&pdev->dev, "mii bus allocation failed\n");
+		goto out;
+	}
+
+	priv->mii_bus->priv = dev;
+	priv->mii_bus->read = nuport_mac_mii_read;
+	priv->mii_bus->write = nuport_mac_mii_write;
+	priv->mii_bus->reset = nuport_mac_mii_reset;
+	priv->mii_bus->name = "nuport-mac-mii";
+	priv->mii_bus->phy_mask = (1 << 0);
+	snprintf(priv->mii_bus->id, MII_BUS_ID_SIZE, "%s", pdev->name);
+	priv->mii_bus->irq = kzalloc(PHY_MAX_ADDR * sizeof(int), GFP_KERNEL);
+	if (!priv->mii_bus->irq) {
+		dev_err(&pdev->dev, "failed to allocate mii_bus irqs\n");
+		ret = -ENOMEM;
+		goto out_mdio;
+	}
+
+	/* We support PHY interrupts routed back to the MAC */
+	for (i = 0; i < PHY_MAX_ADDR; i++)
+		priv->mii_bus->irq[i] = PHY_IGNORE_INTERRUPT;
+
+	ret = of_mdiobus_register(priv->mii_bus, pdev->dev.of_node);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to register mii_bus\n");
+		goto out_mdio_irq;
+	}
+
+	ret = nuport_mac_mii_probe(dev);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to probe MII bus\n");
+		goto out_mdio_unregister;
+	}
+
+	ret = register_netdev(dev);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to register net_device\n");
+		goto out_mdio_probe;
+	}
+
+	/* read existing mac address */
+	nuport_mac_read_mac_address(dev);
+
+	dev_info(&pdev->dev, "registered (MAC: %pM)\n", dev->dev_addr);
+
+	return ret;
+
+out_mdio_probe:
+	phy_disconnect(priv->phydev);
+out_mdio_unregister:
+	mdiobus_unregister(priv->mii_bus);
+out_mdio_irq:
+	kfree(priv->mii_bus->irq);
+out_mdio:
+	mdiobus_free(priv->mii_bus);
+out_platform:
+	platform_set_drvdata(pdev, NULL);
+out:
+	clk_put(priv->ephy_clk);
+	clk_put(priv->emac_clk);
+	free_netdev(dev);
+	platform_set_drvdata(pdev, NULL);
+	return ret;
+}
+
+static int nuport_mac_remove(struct platform_device *pdev)
+{
+	struct net_device *dev = platform_get_drvdata(pdev);
+	struct nuport_mac_priv *priv = netdev_priv(dev);
+
+	unregister_netdev(dev);
+	phy_disconnect(priv->phydev);
+	mdiobus_unregister(priv->mii_bus);
+	kfree(priv->mii_bus->irq);
+	mdiobus_free(priv->mii_bus);
+	clk_put(priv->ephy_clk);
+	clk_put(priv->emac_clk);
+	free_netdev(dev);
+
+	platform_set_drvdata(pdev, NULL);
+
+	return 0;
+}
+
+static struct of_device_id nuport_eth_ids[] __initdata = {
+	{.compatible = "moschip,nuport-mac",},
+	{ /* sentinel */ },
+};
+
+static struct platform_driver nuport_eth_driver = {
+	.driver = {
+		.name = "nuport-mac",
+		.owner = THIS_MODULE,
+		.of_match_table = nuport_eth_ids,
+	},
+	.probe	= nuport_mac_probe,
+	.remove	= nuport_mac_remove,
+};
+
+module_platform_driver(nuport_eth_driver);
+
+MODULE_AUTHOR("Moschip Semiconductors Ltd.");
+MODULE_DESCRIPTION("Moschip MCS8140 Ethernet MAC driver");
+MODULE_LICENSE("GPL");
diff --git a/target/linux/mcs814x/files-3.18/drivers/net/phy/mcs814x.c b/target/linux/mcs814x/files-3.18/drivers/net/phy/mcs814x.c
new file mode 100644
index 0000000..e92176e
--- /dev/null
+++ b/target/linux/mcs814x/files-3.18/drivers/net/phy/mcs814x.c
@@ -0,0 +1,64 @@
+/*
+ * Driver for Moschip MCS814x internal PHY
+ *
+ * Copyright (c) 2012 Florian Fainelli <florian@openwrt.org>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ */
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/errno.h>
+#include <linux/unistd.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/spinlock.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/mii.h>
+#include <linux/ethtool.h>
+#include <linux/phy.h>
+
+MODULE_DESCRIPTION("Moschip MCS814x PHY driver");
+MODULE_AUTHOR("Florian Fainelli <florian@openwrt.org>");
+MODULE_LICENSE("GPL");
+
+/* Nothing special about this PHY but its OUI (O) */
+static struct phy_driver mcs8140_driver = {
+	.phy_id		= 0,
+	.name		= "Moschip MCS8140",
+	.phy_id_mask	= 0x02,
+	.features	= PHY_BASIC_FEATURES,
+	.config_aneg	= &genphy_config_aneg,
+	.read_status	= &genphy_read_status,
+	.suspend	= genphy_suspend,
+	.resume		= genphy_resume,
+	.driver		= { .owner = THIS_MODULE,},
+};
+
+static int __init mcs814x_phy_init(void)
+{
+	return phy_driver_register(&mcs8140_driver);
+}
+
+static void __exit mcs814x_phy_exit(void)
+{
+	phy_driver_unregister(&mcs8140_driver);
+}
+
+module_init(mcs814x_phy_init);
+module_exit(mcs814x_phy_exit);
+
+static struct mdio_device_id __maybe_unused mcs814x_phy_tbl[] = {
+	{ 0x0, 0x0ffffff0 },
+	{ }
+};
+
+MODULE_DEVICE_TABLE(mdio, mcs814x_phy_tbl);
diff --git a/target/linux/mcs814x/files-3.18/drivers/usb/host/ehci-mcs814x.c b/target/linux/mcs814x/files-3.18/drivers/usb/host/ehci-mcs814x.c
new file mode 100644
index 0000000..23928f2
--- /dev/null
+++ b/target/linux/mcs814x/files-3.18/drivers/usb/host/ehci-mcs814x.c
@@ -0,0 +1,163 @@
+/*
+ * MCS814X EHCI Host Controller Driver
+ *
+ * Based on "ehci-fsl.c" by Randy Vinson <rvinson@mvista.com>
+ *
+ * 2007 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/of.h>
+
+#define MCS814X_EHCI_CAPS_OFFSET	0x68
+
+static int mcs814x_ehci_init(struct usb_hcd *hcd)
+{
+	struct ehci_hcd *ehci = hcd_to_ehci(hcd);
+	int retval = 0;
+
+	ehci->caps = hcd->regs + MCS814X_EHCI_CAPS_OFFSET;
+	ehci->regs = hcd->regs
+		+ HC_LENGTH(ehci, ehci_readl(ehci, &ehci->caps->hc_capbase));
+	ehci->hcs_params = ehci_readl(ehci, &ehci->caps->hcs_params);
+	ehci_reset(ehci);
+
+	retval = ehci_init(hcd);
+	if (retval) {
+		pr_err("ehci_init failed\n");
+		return retval;
+	}
+
+	return retval;
+}
+
+static const struct hc_driver mcs814x_ehci_hc_driver = {
+	.description		= hcd_name,
+	.product_desc		= "MCS814X EHCI Host Controller",
+	.hcd_priv_size		= sizeof(struct ehci_hcd),
+	.irq			= ehci_irq,
+	.flags			= HCD_MEMORY | HCD_USB2,
+	.reset			= mcs814x_ehci_init,
+	.start			= ehci_run,
+	.stop			= ehci_stop,
+	.shutdown		= ehci_shutdown,
+	.urb_enqueue		= ehci_urb_enqueue,
+	.urb_dequeue		= ehci_urb_dequeue,
+	.endpoint_disable	= ehci_endpoint_disable,
+	.get_frame_number	= ehci_get_frame,
+	.hub_status_data	= ehci_hub_status_data,
+	.hub_control		= ehci_hub_control,
+#if defined(CONFIG_PM)
+	.bus_suspend		= ehci_bus_suspend,
+	.bus_resume		= ehci_bus_resume,
+#endif
+	.relinquish_port	= ehci_relinquish_port,
+	.port_handed_over	= ehci_port_handed_over,
+
+	.clear_tt_buffer_complete	= ehci_clear_tt_buffer_complete,
+};
+
+static int mcs814x_ehci_probe(struct platform_device *pdev)
+{
+	struct usb_hcd *hcd;
+	const struct hc_driver *driver = &mcs814x_ehci_hc_driver;
+	struct resource *res;
+	int irq;
+	int retval;
+
+	if (usb_disabled())
+		return -ENODEV;
+
+	res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+	if (!res) {
+		dev_err(&pdev->dev,
+			"Found HC with no IRQ. Check %s setup!\n",
+			dev_name(&pdev->dev));
+		return -ENODEV;
+	}
+	irq = res->start;
+
+	pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
+	pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask;
+
+	hcd = usb_create_hcd(driver, &pdev->dev, dev_name(&pdev->dev));
+	if (!hcd) {
+		retval = -ENOMEM;
+		goto fail_create_hcd;
+	}
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		dev_err(&pdev->dev,
+			"Found HC with no register addr. Check %s setup!\n",
+			dev_name(&pdev->dev));
+		retval = -ENODEV;
+		goto fail_request_resource;
+	}
+	hcd->rsrc_start = res->start;
+	hcd->rsrc_len = resource_size(res);
+
+	if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len,
+				driver->description)) {
+		dev_dbg(&pdev->dev, "controller already in use\n");
+		retval = -EBUSY;
+		goto fail_request_resource;
+	}
+
+	hcd->regs = ioremap_nocache(hcd->rsrc_start, hcd->rsrc_len);
+	if (hcd->regs == NULL) {
+		dev_dbg(&pdev->dev, "error mapping memory\n");
+		retval = -EFAULT;
+		goto fail_ioremap;
+	}
+
+	retval = usb_add_hcd(hcd, irq, IRQF_SHARED);
+	if (retval)
+		goto fail_add_hcd;
+
+	dev_info(&pdev->dev, "added MCS814X EHCI driver\n");
+
+	return retval;
+
+fail_add_hcd:
+	iounmap(hcd->regs);
+fail_ioremap:
+	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
+fail_request_resource:
+	usb_put_hcd(hcd);
+fail_create_hcd:
+	dev_err(&pdev->dev, "init %s fail, %d\n", dev_name(&pdev->dev), retval);
+	return retval;
+}
+
+static int mcs814x_ehci_remove(struct platform_device *pdev)
+{
+	struct usb_hcd *hcd = platform_get_drvdata(pdev);
+
+	usb_remove_hcd(hcd);
+	iounmap(hcd->regs);
+	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
+	usb_put_hcd(hcd);
+
+	return 0;
+}
+
+MODULE_ALIAS("platform:mcs814x-ehci");
+
+static const struct of_device_id mcs814x_ehci_id[] = {
+	{ .compatible = "moschip,mcs814x-ehci" },
+	{ .compatible = "usb-ehci" },
+	{ /* sentinel */ },
+};
+
+static struct platform_driver mcs814x_ehci_driver = {
+	.probe = mcs814x_ehci_probe,
+	.remove = mcs814x_ehci_remove,
+	.driver = {
+		.name = "mcs814x-ehci",
+		.of_match_table = mcs814x_ehci_id,
+	},
+};
diff --git a/target/linux/mcs814x/files-3.18/drivers/usb/host/ohci-mcs814x.c b/target/linux/mcs814x/files-3.18/drivers/usb/host/ohci-mcs814x.c
new file mode 100644
index 0000000..161176b
--- /dev/null
+++ b/target/linux/mcs814x/files-3.18/drivers/usb/host/ohci-mcs814x.c
@@ -0,0 +1,202 @@
+/*
+ * OHCI HCD (Host Controller Driver) for USB.
+ *
+ * (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
+ * (C) Copyright 2000-2002 David Brownell <dbrownell@users.sourceforge.net>
+ * (C) Copyright 2002 Hewlett-Packard Company
+ *
+ * Bus Glue for Moschip MCS814x.
+ *
+ * Written by Christopher Hoover <ch@hpl.hp.com>
+ * Based on fragments of previous driver by Russell King et al.
+ *
+ * Modified for LH7A404 from ohci-sa1111.c
+ *  by Durgesh Pattamatta <pattamattad@sharpsec.com>
+ *
+ * Modified for pxa27x from ohci-lh7a404.c
+ *  by Nick Bane <nick@cecomputing.co.uk> 26-8-2004
+ *
+ * Modified for mcs814x from ohci-mcs814x.c
+ *  by Lennert Buytenhek <buytenh@wantstofly.org> 28-2-2006
+ *  Based on an earlier driver by Ray Lehtiniemi
+ *
+ * This file is licenced under the GPL.
+ */
+
+#include <linux/device.h>
+#include <linux/signal.h>
+#include <linux/platform_device.h>
+#include <linux/of.h>
+
+static int usb_hcd_mcs814x_probe(const struct hc_driver *driver,
+			 struct platform_device *pdev)
+{
+	int retval;
+	struct usb_hcd *hcd;
+
+	if (pdev->resource[1].flags != IORESOURCE_IRQ) {
+		pr_debug("resource[1] is not IORESOURCE_IRQ");
+		return -ENOMEM;
+	}
+
+	pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
+	pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask;
+
+	hcd = usb_create_hcd(driver, &pdev->dev, "mcs814x");
+	if (hcd == NULL)
+		return -ENOMEM;
+
+	hcd->rsrc_start = pdev->resource[0].start;
+	hcd->rsrc_len = pdev->resource[0].end - pdev->resource[0].start + 1;
+	if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) {
+		usb_put_hcd(hcd);
+		retval = -EBUSY;
+		goto err1;
+	}
+
+	hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len);
+	if (hcd->regs == NULL) {
+		pr_debug("ioremap failed");
+		retval = -ENOMEM;
+		goto err2;
+	}
+
+	ohci_hcd_init(hcd_to_ohci(hcd));
+
+	retval = usb_add_hcd(hcd, pdev->resource[1].start, IRQF_DISABLED);
+	if (retval == 0)
+		return retval;
+
+	iounmap(hcd->regs);
+err2:
+	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
+err1:
+	usb_put_hcd(hcd);
+
+	return retval;
+}
+
+static void usb_hcd_mcs814x_remove(struct usb_hcd *hcd,
+			struct platform_device *pdev)
+{
+	usb_remove_hcd(hcd);
+	iounmap(hcd->regs);
+	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
+	usb_put_hcd(hcd);
+}
+
+static int ohci_mcs814x_start(struct usb_hcd *hcd)
+{
+	struct ohci_hcd *ohci = hcd_to_ohci(hcd);
+	int ret;
+
+	ret = ohci_init(ohci);
+	if (ret < 0)
+		return ret;
+
+	ret = ohci_run(ohci);
+	if (ret < 0) {
+		ohci_err(ohci, "can't start %s", hcd->self.bus_name);
+		ohci_stop(hcd);
+		return ret;
+	}
+
+	return 0;
+}
+
+static struct hc_driver ohci_mcs814x_hc_driver = {
+	.description		= hcd_name,
+	.product_desc		= "MCS814X OHCI",
+	.hcd_priv_size		= sizeof(struct ohci_hcd),
+	.irq			= ohci_irq,
+	.flags			= HCD_USB11 | HCD_MEMORY,
+	.start			= ohci_mcs814x_start,
+	.stop			= ohci_stop,
+	.shutdown		= ohci_shutdown,
+	.urb_enqueue		= ohci_urb_enqueue,
+	.urb_dequeue		= ohci_urb_dequeue,
+	.endpoint_disable	= ohci_endpoint_disable,
+	.get_frame_number	= ohci_get_frame,
+	.hub_status_data	= ohci_hub_status_data,
+	.hub_control		= ohci_hub_control,
+#ifdef CONFIG_PM
+	.bus_suspend		= ohci_bus_suspend,
+	.bus_resume		= ohci_bus_resume,
+#endif
+	.start_port_reset	= ohci_start_port_reset,
+};
+
+extern int usb_disabled(void);
+
+static int ohci_hcd_mcs814x_drv_probe(struct platform_device *pdev)
+{
+	int ret;
+
+	ret = -ENODEV;
+	if (!usb_disabled())
+		ret = usb_hcd_mcs814x_probe(&ohci_mcs814x_hc_driver, pdev);
+
+	return ret;
+}
+
+static int ohci_hcd_mcs814x_drv_remove(struct platform_device *pdev)
+{
+	struct usb_hcd *hcd = platform_get_drvdata(pdev);
+
+	usb_hcd_mcs814x_remove(hcd, pdev);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int ohci_hcd_mcs814x_drv_suspend(struct platform_device *pdev, pm_message_t state)
+{
+	struct usb_hcd *hcd = platform_get_drvdata(pdev);
+	struct ohci_hcd *ohci = hcd_to_ohci(hcd);
+
+	if (time_before(jiffies, ohci->next_statechange))
+		msleep(5);
+	ohci->next_statechange = jiffies;
+
+	hcd->state = HC_STATE_SUSPENDED;
+
+	return 0;
+}
+
+static int ohci_hcd_mcs814x_drv_resume(struct platform_device *pdev)
+{
+	struct usb_hcd *hcd = platform_get_drvdata(pdev);
+	struct ohci_hcd *ohci = hcd_to_ohci(hcd);
+	int status;
+
+	if (time_before(jiffies, ohci->next_statechange))
+		msleep(5);
+	ohci->next_statechange = jiffies;
+
+	ohci_finish_controller_resume(hcd);
+	return 0;
+}
+#endif
+
+static const struct of_device_id mcs814x_ohci_id[] = {
+	{ .compatible = "moschip,mcs814x-ohci" },
+	{ .compatible = "ohci-le" },
+	{ /* sentinel */ },
+};
+
+static struct platform_driver ohci_hcd_mcs814x_driver = {
+	.probe		= ohci_hcd_mcs814x_drv_probe,
+	.remove		= ohci_hcd_mcs814x_drv_remove,
+	.shutdown	= usb_hcd_platform_shutdown,
+#ifdef CONFIG_PM
+	.suspend	= ohci_hcd_mcs814x_drv_suspend,
+	.resume		= ohci_hcd_mcs814x_drv_resume,
+#endif
+	.driver		= {
+		.name	= "mcs814x-ohci",
+		.owner	= THIS_MODULE,
+		.of_match_table = mcs814x_ohci_id,
+	},
+};
+
+MODULE_ALIAS("platform:mcs814x-ohci");
diff --git a/target/linux/mcs814x/files-3.18/drivers/watchdog/mcs814x_wdt.c b/target/linux/mcs814x/files-3.18/drivers/watchdog/mcs814x_wdt.c
new file mode 100644
index 0000000..7bcded5
--- /dev/null
+++ b/target/linux/mcs814x/files-3.18/drivers/watchdog/mcs814x_wdt.c
@@ -0,0 +1,207 @@
+/*
+ * Moschip MCS814x Watchdog driver
+ *
+ * Copyright (C) 2012, Florian Fainelli <florian@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/miscdevice.h>
+#include <linux/watchdog.h>
+#include <linux/io.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/of.h>
+
+#define WDT_COUNT	0x00
+#define WDT_CTRL	0x04
+#define  WDT_CTRL_EN	0x1
+
+/* watchdog frequency */
+#define WDT_MAX_VALUE	(0xffffffff)
+
+struct mcs814x_wdt {
+	void __iomem		*regs;
+	spinlock_t		lock;
+	struct watchdog_device	wdt_dev;
+	struct clk		*clk;
+};
+
+static int mcs814x_wdt_start(struct watchdog_device *dev)
+{
+	struct mcs814x_wdt *wdt = watchdog_get_drvdata(dev);
+	u32 reg;
+
+	spin_lock(&wdt->lock);
+	reg = readl_relaxed(wdt->regs + WDT_CTRL);
+	reg |= WDT_CTRL_EN;
+	writel_relaxed(reg, wdt->regs + WDT_CTRL);
+	spin_unlock(&wdt->lock);
+
+	return 0;
+}
+
+static int mcs814x_wdt_stop(struct watchdog_device *dev)
+{
+	struct mcs814x_wdt *wdt = watchdog_get_drvdata(dev);
+	u32 reg;
+
+	spin_lock(&wdt->lock);
+	reg = readl_relaxed(wdt->regs + WDT_CTRL);
+	reg &= ~WDT_CTRL_EN;
+	writel_relaxed(reg, wdt->regs + WDT_CTRL);
+	spin_unlock(&wdt->lock);
+
+	return 0;
+}
+
+static int mcs814x_wdt_set_timeout(struct watchdog_device *dev,
+				unsigned int new_timeout)
+{
+	struct mcs814x_wdt *wdt = watchdog_get_drvdata(dev);
+
+	spin_lock(&wdt->lock);
+	/* watchdog counts upward and rollover (0xfffffff -> 0)
+	 * triggers the reboot
+	 */
+	writel_relaxed(WDT_MAX_VALUE - (new_timeout * clk_get_rate(wdt->clk)),
+		wdt->regs + WDT_COUNT);
+	spin_unlock(&wdt->lock);
+
+	return 0;
+}
+
+static int mcs814x_wdt_ping(struct watchdog_device *dev)
+{
+	/* restart the watchdog */
+	mcs814x_wdt_stop(dev);
+	mcs814x_wdt_set_timeout(dev, dev->timeout);
+	mcs814x_wdt_start(dev);
+
+	return 0;
+}
+
+static const struct watchdog_info mcs814x_wdt_ident = {
+	.options	= WDIOF_CARDRESET | WDIOF_SETTIMEOUT |
+			  WDIOF_MAGICCLOSE | WDIOF_KEEPALIVEPING,
+	.identity	= "MCS814x Watchdog",
+};
+
+static struct watchdog_ops mcs814x_wdt_ops = {
+	.owner		= THIS_MODULE,
+	.start		= mcs814x_wdt_start,
+	.stop		= mcs814x_wdt_stop,
+	.set_timeout	= mcs814x_wdt_set_timeout,
+	.ping		= mcs814x_wdt_ping,
+};
+
+static int mcs814x_wdt_probe(struct platform_device *pdev)
+{
+	struct resource *res;
+	struct mcs814x_wdt *wdt;
+	int ret;
+	struct clk *clk;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res)
+		return -ENODEV;
+
+	clk = clk_get(NULL, "wdt");
+	if (IS_ERR_OR_NULL(clk)) {
+		dev_err(&pdev->dev, "failed to get watchdog clock\n");
+		return PTR_ERR(clk);
+	}
+
+	wdt = kzalloc(sizeof(*wdt), GFP_KERNEL);
+	if (!wdt) {
+		ret = -ENOMEM;
+		goto out_clk;
+	}
+
+	spin_lock_init(&wdt->lock);
+	wdt->clk = clk;
+	wdt->wdt_dev.info = &mcs814x_wdt_ident;
+	wdt->wdt_dev.ops = &mcs814x_wdt_ops;
+	wdt->wdt_dev.min_timeout = 1;
+	/* approximately 10995 secs */
+	wdt->wdt_dev.max_timeout = (WDT_MAX_VALUE / clk_get_rate(clk));
+
+	platform_set_drvdata(pdev, wdt);
+
+	/* only ioremap registers, because the register is shared */
+	wdt->regs = devm_ioremap(&pdev->dev, res->start, resource_size(res));
+	if (!wdt->regs) {
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	watchdog_set_drvdata(&wdt->wdt_dev, wdt);
+
+	ret = watchdog_register_device(&wdt->wdt_dev);
+	if (ret) {
+		dev_err(&pdev->dev, "cannot register watchdog: %d\n", ret);
+		goto out;
+	}
+
+	dev_info(&pdev->dev, "registered\n");
+	return 0;
+
+out:
+	platform_set_drvdata(pdev, NULL);
+	kfree(wdt);
+out_clk:
+	clk_put(clk);
+	return ret;
+}
+
+static int mcs814x_wdt_remove(struct platform_device *pdev)
+{
+	struct mcs814x_wdt *wdt = platform_get_drvdata(pdev);
+
+	clk_put(wdt->clk);
+	watchdog_unregister_device(&wdt->wdt_dev);
+	watchdog_set_drvdata(&wdt->wdt_dev, NULL);
+	kfree(wdt);
+	platform_set_drvdata(pdev, NULL);
+
+	return 0;
+}
+
+static const struct of_device_id mcs814x_wdt_ids[] = {
+	{ .compatible = "moschip,mcs814x-wdt", },
+	{ /* sentinel */ },
+};
+
+static struct platform_driver mcs814x_wdt_driver = {
+	.driver	= {
+		.name	= "mcs814x-wdt",
+		.owner	= THIS_MODULE,
+		.of_match_table = mcs814x_wdt_ids,
+	},
+	.probe		= mcs814x_wdt_probe,
+	.remove		= mcs814x_wdt_remove,
+};
+
+module_platform_driver(mcs814x_wdt_driver);
+
+MODULE_AUTHOR("Florian Fainelli <florian@openwrt.org>");
+MODULE_DESCRIPTION("Moschip MCS814x Watchdog driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
+MODULE_ALIAS("platform:mcs814x-wdt");
diff --git a/target/linux/mcs814x/image/Makefile b/target/linux/mcs814x/image/Makefile
new file mode 100644
index 0000000..3afd660
--- /dev/null
+++ b/target/linux/mcs814x/image/Makefile
@@ -0,0 +1,60 @@
+#
+# Copyright (C) 2012 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+JFFS2_BLOCKSIZE = 128k
+
+include $(TOPDIR)/rules.mk
+include $(INCLUDE_DIR)/image.mk
+
+TARGET_DTBS := rbt-832 dlan-usb-extender
+
+DTBS_DIR:=dts/
+
+LOADADDR:=0x00008000
+
+UIMAGE:=$(BIN_DIR)/$(IMG_PREFIX)-uImage
+
+define Image/Build/MkuImage
+	mkimage -A arm -O linux -T kernel -a $(LOADADDR) -C none -e $(LOADADDR) \
+	-n 'ARM OpenWrt Linux-$(LINUX_VERSION)' -d $(1) $(2);
+endef
+
+define Image/Build/DTB
+	cp $(KDIR)/zImage$(2) $(KDIR)/zImage-$(1);
+	cat $(LINUX_DIR)/arch/$(ARCH)/boot/$(DTBS_DIR)$(1).dtb >> $(KDIR)/zImage$(2)-$(1);
+	$(call Image/Build/MkuImage,$(KDIR)/zImage$(2)-$(1),$(KDIR)/uImage$(2)-$(1))
+	cp $(KDIR)/uImage$(2)-$(1) $(UIMAGE)$(2)-$(1);
+endef
+
+define Image/Build/Profile/dLAN_USB_Extender
+	dd if=$(KDIR)/uImage-dlan-usb-extender bs=64k conv=sync of=$(KDIR)/$(IMG_PREFIX)-dlan-usb-extender-upgrade-$(1).bin
+	cat $(KDIR)/root.$(1) >> $(KDIR)/$(IMG_PREFIX)-dlan-usb-extender-upgrade-$(1).bin
+	cp $(KDIR)/$(IMG_PREFIX)-dlan-usb-extender-upgrade-$(1).bin $(BIN_DIR)/
+endef
+
+define Image/BuildKernel
+	$(foreach dtb,$(TARGET_DTBS),$(call Image/Build/DTB,$(dtb)))
+endef
+
+define Image/Build/Initramfs
+	$(foreach dtb,$(TARGET_DTBS),$(call Image/Build/DTB,$(dtb),-initramfs))
+endef
+
+define Image/Build/squashfs
+	$(STAGING_DIR_HOST)/bin/padjffs2 $(KDIR)/root.squashfs 128
+endef
+
+define Image/Build
+	$(call Image/Build/$(1))
+	dd if=$(KDIR)/root.$(1) of=$(BIN_DIR)/$(IMG_PREFIX)-root.$(1) bs=128k conv=sync
+	$(call Image/Build/Profile/$(PROFILE),$(1))
+ifneq ($(CONFIG_TARGET_ROOTFS_INITRAMFS),)
+	$(call Image/Build/Initramfs)
+endif
+endef
+
+$(eval $(call BuildImage))
diff --git a/target/linux/mcs814x/modules.mk b/target/linux/mcs814x/modules.mk
new file mode 100644
index 0000000..c29ca86
--- /dev/null
+++ b/target/linux/mcs814x/modules.mk
@@ -0,0 +1,20 @@
+#
+# Copyright (C) 2012 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+
+define KernelPackage/mcs814x-wdt
+  SUBMENU:=$(OTHER_MENU)
+  DEPENDS:=@TARGET_mcs814x
+  TITLE:=MCS814x watchdog driver
+  KCONFIG:=CONFIG_MCS814X_WATCHDOG
+  FILES:=$(LINUX_DIR)/drivers/$(WATCHDOG_DIR)/mcs814x_wdt.ko
+  AUTOLOAD:=$(call AutoLoad,50,mcs814x_wdt)
+endef
+
+define KernelPackage/mcs814x-wdt/description
+  Kernel module for the Moschip MCS814x watchdog timer.
+endef
+
+$(eval $(call KernelPackage,mcs814x-wdt))
diff --git a/target/linux/mcs814x/patches-3.18/001-platform.patch b/target/linux/mcs814x/patches-3.18/001-platform.patch
new file mode 100644
index 0000000..221209f
--- /dev/null
+++ b/target/linux/mcs814x/patches-3.18/001-platform.patch
@@ -0,0 +1,64 @@
+--- a/arch/arm/Kconfig
++++ b/arch/arm/Kconfig
+@@ -267,7 +267,8 @@ config PHYS_OFFSET
+ 			ARCH_INTEGRATOR || \
+ 			ARCH_IOP13XX || \
+ 			ARCH_KS8695 || \
+-			(ARCH_REALVIEW && !REALVIEW_HIGH_PHYS_OFFSET)
++			(ARCH_REALVIEW && !REALVIEW_HIGH_PHYS_OFFSET) || \
++			ARCH_MCS814X
+ 	default 0x10000000 if ARCH_OMAP1 || ARCH_RPC
+ 	default 0x20000000 if ARCH_S5PV210
+ 	default 0x70000000 if REALVIEW_HIGH_PHYS_OFFSET
+@@ -786,6 +787,21 @@ config ARCH_OMAP1
+ 	help
+ 	  Support for older TI OMAP1 (omap7xx, omap15xx or omap16xx)
+ 
++config ARCH_MCS814X
++	bool "Moschip MCS814x"
++	select FIQ
++	select GENERIC_IRQ_CHIP
++	select GENERIC_GPIO
++	select ARCH_REQUIRE_GPIOLIB
++	select CLKDEV_LOOKUP
++	select ARCH_USES_GETTIMEOFFSET
++	select USB_ARCH_HAS_OHCI
++	select USB_ARCH_HAS_EHCI
++	select MULTI_IRQ_HANDLER
++	help
++	  Support for Moschip MCS814x SoCs (MCS8140).
++
++
+ endchoice
+ 
+ menu "Multiple platform selection"
+@@ -927,6 +943,8 @@ source "arch/arm/mach-picoxcell/Kconfig"
+ source "arch/arm/mach-pxa/Kconfig"
+ source "arch/arm/plat-pxa/Kconfig"
+ 
++source "arch/arm/mach-mcs814x/Kconfig"
++
+ source "arch/arm/mach-mmp/Kconfig"
+ 
+ source "arch/arm/mach-qcom/Kconfig"
+--- a/arch/arm/Makefile
++++ b/arch/arm/Makefile
+@@ -172,6 +172,7 @@ machine-$(CONFIG_ARCH_IXP4XX)		+= ixp4xx
+ machine-$(CONFIG_ARCH_KEYSTONE)		+= keystone
+ machine-$(CONFIG_ARCH_KS8695)		+= ks8695
+ machine-$(CONFIG_ARCH_LPC32XX)		+= lpc32xx
++machine-$(CONFIG_ARCH_MCS814X)		+= mcs814x
+ machine-$(CONFIG_ARCH_MESON)		+= meson
+ machine-$(CONFIG_ARCH_MMP)		+= mmp
+ machine-$(CONFIG_ARCH_MOXART)		+= moxart
+--- a/arch/arm/boot/dts/Makefile
++++ b/arch/arm/boot/dts/Makefile
+@@ -163,6 +163,8 @@ dtb-$(CONFIG_MACH_KIRKWOOD) += kirkwood-
+ 	kirkwood-ts419-6282.dtb
+ dtb-$(CONFIG_ARCH_LPC32XX) += ea3250.dtb phy3250.dtb
+ dtb-$(CONFIG_ARCH_MARCO) += marco-evb.dtb
++dtb-$(CONFIG_ARCH_MCS814X) += dlan-usb-extender.dtb \
++	rbt-832.dtb
+ dtb-$(CONFIG_MACH_MESON6) += meson6-atv1200.dtb
+ dtb-$(CONFIG_ARCH_MOXART) += moxart-uc7112lx.dtb
+ dtb-$(CONFIG_ARCH_MXC) += \
diff --git a/target/linux/mcs814x/patches-3.18/003-ethernet.patch b/target/linux/mcs814x/patches-3.18/003-ethernet.patch
new file mode 100644
index 0000000..3ee8cd6
--- /dev/null
+++ b/target/linux/mcs814x/patches-3.18/003-ethernet.patch
@@ -0,0 +1,16 @@
+--- a/drivers/net/ethernet/Kconfig
++++ b/drivers/net/ethernet/Kconfig
+@@ -186,4 +186,6 @@ source "drivers/net/ethernet/wiznet/Kcon
+ source "drivers/net/ethernet/xilinx/Kconfig"
+ source "drivers/net/ethernet/xircom/Kconfig"
+ 
++source "drivers/net/ethernet/mcs8140/Kconfig"
++
+ endif # ETHERNET
+--- a/drivers/net/ethernet/Makefile
++++ b/drivers/net/ethernet/Makefile
+@@ -84,3 +84,4 @@ obj-$(CONFIG_NET_VENDOR_VIA) += via/
+ obj-$(CONFIG_NET_VENDOR_WIZNET) += wiznet/
+ obj-$(CONFIG_NET_VENDOR_XILINX) += xilinx/
+ obj-$(CONFIG_NET_VENDOR_XIRCOM) += xircom/
++obj-$(CONFIG_NUPORT_ETHERNET_DRIVER) += mcs8140/
diff --git a/target/linux/mcs814x/patches-3.18/004-usb.patch b/target/linux/mcs814x/patches-3.18/004-usb.patch
new file mode 100644
index 0000000..d69ec21
--- /dev/null
+++ b/target/linux/mcs814x/patches-3.18/004-usb.patch
@@ -0,0 +1,28 @@
+--- a/drivers/usb/host/ehci-hcd.c
++++ b/drivers/usb/host/ehci-hcd.c
+@@ -1298,6 +1298,11 @@ MODULE_LICENSE ("GPL");
+ #define	PLATFORM_DRIVER		ehci_hcd_sead3_driver
+ #endif
+ 
++#ifdef CONFIG_ARCH_MCS814X
++#include "ehci-mcs814x.c"
++#define PLATFORM_DRIVER		mcs814x_ehci_driver
++#endif
++
+ static int __init ehci_hcd_init(void)
+ {
+ 	int retval = 0;
+--- a/drivers/usb/host/ohci-hcd.c
++++ b/drivers/usb/host/ohci-hcd.c
+@@ -1259,6 +1259,11 @@ MODULE_LICENSE ("GPL");
+ #define PLATFORM_DRIVER		ohci_hcd_tilegx_driver
+ #endif
+ 
++#ifdef CONFIG_ARCH_MCS814X
++#include "ohci-mcs814x.c"
++#define PLATFORM_DRIVER		ohci_hcd_mcs814x_driver
++#endif
++
+ static int __init ohci_hcd_mod_init(void)
+ {
+ 	int retval = 0;
diff --git a/target/linux/mcs814x/patches-3.18/005-mcs814x_rng.patch b/target/linux/mcs814x/patches-3.18/005-mcs814x_rng.patch
new file mode 100644
index 0000000..4af3d86
--- /dev/null
+++ b/target/linux/mcs814x/patches-3.18/005-mcs814x_rng.patch
@@ -0,0 +1,31 @@
+--- a/drivers/char/hw_random/Kconfig
++++ b/drivers/char/hw_random/Kconfig
+@@ -229,6 +229,18 @@ config HW_RANDOM_TX4939
+ 
+ 	  If unsure, say Y.
+ 
++config HW_RANDOM_MCS814X
++	tristate "Moschip MCS814x Random Number Generator"
++	depends on HW_RANDOM && ARCH_MCS814X
++	---help---
++	  This driver provides kernel-side support for the Random Number
++	  Generator hardware found on Moschip MCS814x processors.
++
++	  To compile this driver as a module, choose M here: the
++	  module will be called mcs814x-rng.
++
++	  If unusure, say Y.
++
+ config HW_RANDOM_MXC_RNGA
+ 	tristate "Freescale i.MX RNGA Random Number Generator"
+ 	depends on ARCH_HAS_RNGA
+--- a/drivers/char/hw_random/Makefile
++++ b/drivers/char/hw_random/Makefile
+@@ -19,6 +19,7 @@ obj-$(CONFIG_HW_RANDOM_OMAP3_ROM) += oma
+ obj-$(CONFIG_HW_RANDOM_PASEMI) += pasemi-rng.o
+ obj-$(CONFIG_HW_RANDOM_VIRTIO) += virtio-rng.o
+ obj-$(CONFIG_HW_RANDOM_TX4939) += tx4939-rng.o
++obj-$(CONFIG_HW_RANDOM_MCS814X) += mcs814x-rng.o
+ obj-$(CONFIG_HW_RANDOM_MXC_RNGA) += mxc-rnga.o
+ obj-$(CONFIG_HW_RANDOM_OCTEON) += octeon-rng.o
+ obj-$(CONFIG_HW_RANDOM_NOMADIK) += nomadik-rng.o
diff --git a/target/linux/mcs814x/patches-3.18/006-mcs814x_wdt.patch b/target/linux/mcs814x/patches-3.18/006-mcs814x_wdt.patch
new file mode 100644
index 0000000..72481f6
--- /dev/null
+++ b/target/linux/mcs814x/patches-3.18/006-mcs814x_wdt.patch
@@ -0,0 +1,25 @@
+--- a/drivers/watchdog/Kconfig
++++ b/drivers/watchdog/Kconfig
+@@ -505,6 +505,12 @@ config MESON_WATCHDOG
+ 	  To compile this driver as a module, choose M here: the
+ 	  module will be called meson_wdt.
+ 
++config MCS814X_WATCHDOG
++	tristate "Moschip MCS814x watchdog"
++	depends on WATCHDOG_CORE && ARCH_MCS814X
++	help
++	  Support for the Moschip MCS814x SoCs on-chip watchdog timer.
++
+ # AVR32 Architecture
+ 
+ config AT32AP700X_WDT
+--- a/drivers/watchdog/Makefile
++++ b/drivers/watchdog/Makefile
+@@ -63,6 +63,7 @@ obj-$(CONFIG_QCOM_WDT) += qcom-wdt.o
+ obj-$(CONFIG_BCM_KONA_WDT) += bcm_kona_wdt.o
+ obj-$(CONFIG_TEGRA_WATCHDOG) += tegra_wdt.o
+ obj-$(CONFIG_MESON_WATCHDOG) += meson_wdt.o
++obj-$(CONFIG_MCS814X_WATCHDOG) += mcs814x_wdt.o
+ 
+ # AVR32 Architecture
+ obj-$(CONFIG_AT32AP700X_WDT) += at32ap700x_wdt.o
diff --git a/target/linux/mcs814x/patches-3.18/008-mcs814x_gpio.patch b/target/linux/mcs814x/patches-3.18/008-mcs814x_gpio.patch
new file mode 100644
index 0000000..92c85a7
--- /dev/null
+++ b/target/linux/mcs814x/patches-3.18/008-mcs814x_gpio.patch
@@ -0,0 +1,25 @@
+--- a/drivers/gpio/Kconfig
++++ b/drivers/gpio/Kconfig
+@@ -819,6 +819,12 @@ config GPIO_MC33880
+ 	  SPI driver for Freescale MC33880 high-side/low-side switch.
+ 	  This provides GPIO interface supporting inputs and outputs.
+ 
++config GPIO_MCS814X
++	tristate "Moschip MCS814x GPIO support"
++	depends on ARCH_MCS814X
++	help
++	   GPIO driver for Moschip MCS814x SoC gpio controllers.
++
+ config GPIO_74X164
+ 	tristate "74x164 serial-in/parallel-out 8-bits shift register"
+ 	depends on SPI_MASTER && OF
+--- a/drivers/gpio/Makefile
++++ b/drivers/gpio/Makefile
+@@ -49,6 +49,7 @@ obj-$(CONFIG_GPIO_MAX732X)	+= gpio-max73
+ obj-$(CONFIG_GPIO_MC33880)	+= gpio-mc33880.o
+ obj-$(CONFIG_GPIO_MC9S08DZ60)	+= gpio-mc9s08dz60.o
+ obj-$(CONFIG_GPIO_MCP23S08)	+= gpio-mcp23s08.o
++obj-$(CONFIG_GPIO_MCS814X)	+= gpio-mcs814x.o
+ obj-$(CONFIG_GPIO_ML_IOH)	+= gpio-ml-ioh.o
+ obj-$(CONFIG_GPIO_MM_LANTIQ)	+= gpio-mm-lantiq.o
+ obj-$(CONFIG_GPIO_MOXART)	+= gpio-moxart.o
diff --git a/target/linux/mcs814x/patches-3.18/011-mcs814x_internal_phy.patch b/target/linux/mcs814x/patches-3.18/011-mcs814x_internal_phy.patch
new file mode 100644
index 0000000..20d5add
--- /dev/null
+++ b/target/linux/mcs814x/patches-3.18/011-mcs814x_internal_phy.patch
@@ -0,0 +1,20 @@
+--- a/drivers/net/phy/Kconfig
++++ b/drivers/net/phy/Kconfig
+@@ -164,6 +164,10 @@ config RTL8306_PHY
+ 	tristate "Driver for Realtek RTL8306S switches"
+ 	select SWCONFIG
+ 
++config MCS814X_PHY
++	tristate "Driver for the Moschip MCS814x internal PHY"
++	depends on ARCH_MCS814X
++
+ config FIXED_PHY
+ 	bool "Driver for MDIO Bus/PHY emulation with fixed speed/link PHYs"
+ 	depends on PHYLIB=y
+--- a/drivers/net/phy/Makefile
++++ b/drivers/net/phy/Makefile
+@@ -51,3 +51,4 @@ obj-$(CONFIG_MDIO_SUN4I)	+= mdio-sun4i.o
+ obj-$(CONFIG_MDIO_MOXART)	+= mdio-moxart.o
+ obj-$(CONFIG_AMD_XGBE_PHY)	+= amd-xgbe-phy.o
+ obj-$(CONFIG_MDIO_BCM_UNIMAC)	+= mdio-bcm-unimac.o
++obj-$(CONFIG_MCS814X_PHY)	+= mcs814x.o
diff --git a/target/linux/mcs814x/patches-3.18/012-mtd-cfi_cmdset_0002-force-word-write.patch b/target/linux/mcs814x/patches-3.18/012-mtd-cfi_cmdset_0002-force-word-write.patch
new file mode 100644
index 0000000..10593ce
--- /dev/null
+++ b/target/linux/mcs814x/patches-3.18/012-mtd-cfi_cmdset_0002-force-word-write.patch
@@ -0,0 +1,14 @@
+--- a/drivers/mtd/chips/cfi_cmdset_0002.c
++++ b/drivers/mtd/chips/cfi_cmdset_0002.c
+@@ -40,9 +40,9 @@
+ #include <linux/mtd/xip.h>
+ 
+ #define AMD_BOOTLOC_BUG
+-#define FORCE_WORD_WRITE 0
++#define FORCE_WORD_WRITE 1
+ 
+-#define MAX_WORD_RETRIES 3
++#define MAX_WORD_RETRIES 10
+ 
+ #define SST49LF004B	        0x0060
+ #define SST49LF040B	        0x0050
diff --git a/target/linux/mcs814x/patches-3.18/013-ohci_workarounds.patch b/target/linux/mcs814x/patches-3.18/013-ohci_workarounds.patch
new file mode 100644
index 0000000..8697f03
--- /dev/null
+++ b/target/linux/mcs814x/patches-3.18/013-ohci_workarounds.patch
@@ -0,0 +1,64 @@
+--- a/drivers/usb/host/ohci.h
++++ b/drivers/usb/host/ohci.h
+@@ -122,7 +122,7 @@ struct td {
+ 	/* PSW is only for ISO.  Only 1 PSW entry is used, but on
+ 	 * big-endian PPC hardware that's the second entry.
+ 	 */
+-#define MAXPSW	2
++#define MAXPSW	8
+ 	__hc16		hwPSW [MAXPSW];
+ 
+ 	/* rest are purely for the driver's use */
+--- a/drivers/usb/host/ohci-hcd.c
++++ b/drivers/usb/host/ohci-hcd.c
+@@ -441,6 +441,7 @@ static int ohci_init (struct ohci_hcd *o
+ {
+ 	int ret;
+ 	struct usb_hcd *hcd = ohci_to_hcd(ohci);
++	u32 hcca_area;
+ 
+ 	/* Accept arbitrarily long scatter-gather lists */
+ 	hcd->self.sg_tablesize = ~0;
+@@ -501,11 +502,13 @@ static int ohci_init (struct ohci_hcd *o
+ 			(unsigned long) ohci);
+ 	set_timer_slack(&ohci->io_watchdog, msecs_to_jiffies(20));
+ 
+-	ohci->hcca = dma_alloc_coherent (hcd->self.controller,
+-			sizeof(*ohci->hcca), &ohci->hcca_dma, GFP_KERNEL);
++	hcca_area = ohci_readl(ohci, &ohci->regs->hcca);
++	ohci->hcca = ioremap_nocache(hcca_area, sizeof *ohci->hcca);
+ 	if (!ohci->hcca)
+ 		return -ENOMEM;
+ 
++	ohci->hcca_dma = hcca_area;
++
+ 	if ((ret = ohci_mem_init (ohci)) < 0)
+ 		ohci_stop (hcd);
+ 	else {
+@@ -523,6 +526,7 @@ static int ohci_init (struct ohci_hcd *o
+  */
+ static int ohci_run (struct ohci_hcd *ohci)
+ {
++	int			i = 0;
+ 	u32			mask, val;
+ 	int			first = ohci->fminterval == 0;
+ 	struct usb_hcd		*hcd = ohci_to_hcd(ohci);
+@@ -573,6 +577,8 @@ static int ohci_run (struct ohci_hcd *oh
+ 	msleep(val);
+ 
+ 	memset (ohci->hcca, 0, sizeof (struct ohci_hcca));
++	for (i = 0; i < NUM_INTS; i++)
++		ohci->hcca->int_table[i] = 0;
+ 
+ 	/* 2msec timelimit here means no irqs/preempt */
+ 	spin_lock_irq (&ohci->lock);
+@@ -984,9 +990,6 @@ static void ohci_stop (struct usb_hcd *h
+ 	remove_debug_files (ohci);
+ 	ohci_mem_cleanup (ohci);
+ 	if (ohci->hcca) {
+-		dma_free_coherent (hcd->self.controller,
+-				sizeof *ohci->hcca,
+-				ohci->hcca, ohci->hcca_dma);
+ 		ohci->hcca = NULL;
+ 		ohci->hcca_dma = 0;
+ 	}
diff --git a/target/linux/mcs814x/patches-3.18/014-debuguart.patch b/target/linux/mcs814x/patches-3.18/014-debuguart.patch
new file mode 100644
index 0000000..5f1b67f
--- /dev/null
+++ b/target/linux/mcs814x/patches-3.18/014-debuguart.patch
@@ -0,0 +1,41 @@
+--- a/arch/arm/mach-mcs814x/include/mach/debug-macro.S
++++ /dev/null
+@@ -1,11 +0,0 @@
+-#include <mach/mcs814x.h>
+-
+-                .macro  addruart, rp, rv, tmp
+-		ldr	\rp, =MCS814X_PHYS_BASE
+-		ldr	\rv, =MCS814X_VIRT_BASE
+-		orr	\rp, \rp, #MCS814X_UART
+-		orr	\rv, \rv, #MCS814X_UART
+-                .endm
+-
+-#define UART_SHIFT	2
+-#include <asm/hardware/debug-8250.S>
+--- a/arch/arm/Kconfig.debug
++++ b/arch/arm/Kconfig.debug
+@@ -1089,7 +1089,7 @@ config DEBUG_UART_8250
+ 		(FOOTBRIDGE && !DEBUG_DC21285_PORT) || \
+ 		ARCH_GEMINI || ARCH_IOP13XX || ARCH_IOP32X || \
+ 		ARCH_IOP33X || ARCH_IXP4XX || \
+-		ARCH_LPC32XX || ARCH_MV78XX0 || ARCH_ORION5X || ARCH_RPC
++		ARCH_LPC32XX || ARCH_MCS814X || ARCH_MV78XX0 || ARCH_ORION5X || ARCH_RPC
+ 
+ # Compatibility options for BCM63xx
+ config DEBUG_UART_BCM63XX
+@@ -1124,6 +1124,7 @@ config DEBUG_UART_PHYS
+ 	default 0x3e000000 if DEBUG_BCM_KONA_UART
+ 	default 0x4000e400 if DEBUG_LL_UART_EFM32
+ 	default 0x40090000 if ARCH_LPC32XX
++	default 0x400dc000 if ARCH_MCS814X
+ 	default 0x40100000 if DEBUG_PXA_UART1
+ 	default 0x42000000 if ARCH_GEMINI
+ 	default 0x50000000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART0 || \
+@@ -1178,6 +1179,7 @@ config DEBUG_UART_VIRT
+ 	default 0xe0010fe0 if ARCH_RPC
+ 	default 0xe1000000 if DEBUG_MSM_UART
+ 	default 0xf0000be0 if ARCH_EBSA110
++	default 0xf00dc000 if ARCH_MCS814X
+ 	default 0xf01fb000 if DEBUG_NOMADIK_UART
+ 	default 0xf0201000 if DEBUG_BCM2835
+ 	default 0xf1000300 if DEBUG_BCM_5301X
diff --git a/target/linux/mcs814x/profiles/000-Generic.mk b/target/linux/mcs814x/profiles/000-Generic.mk
new file mode 100644
index 0000000..a6d0f30
--- /dev/null
+++ b/target/linux/mcs814x/profiles/000-Generic.mk
@@ -0,0 +1,16 @@
+#
+# Copyright (C) 2012 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+define Profile/Generic
+  NAME:=Generic profile
+endef
+
+define Profile/Generic/Description
+   Default profile for Moschip MCS814x targets
+endef
+$(eval $(call Profile,Generic))
+
diff --git a/target/linux/mcs814x/profiles/100-dLAN-USB-Extender.mk b/target/linux/mcs814x/profiles/100-dLAN-USB-Extender.mk
new file mode 100644
index 0000000..168bfa1
--- /dev/null
+++ b/target/linux/mcs814x/profiles/100-dLAN-USB-Extender.mk
@@ -0,0 +1,25 @@
+#
+# Copyright (C) 2012 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+define Profile/dLAN_USB_Extender
+  NAME:=Devolo dLAN USB Extender
+  PACKAGES:=kmod-usb-serial kmod-usb-serial-ftdi
+endef
+
+define Profile/dLAN_USB_Extender/Description
+	Package set specifically tuned for the Devolo dLAN USB Extender device.
+
+	Binary packages are required to enable the power line portion of the
+	device, these packages can be found in the following package feed:
+
+	src-git dlan https://github.com/ffainelli/dlan-usb-extender-3rd-party.git
+
+	Instructions are available here:
+	http://ffainelli.github.io/dlan-usb-extender-3rd-party/
+endef
+$(eval $(call Profile,dLAN_USB_Extender))
+