trunk-47048

100 files changed, 20059 insertions, 0 deletions

diff --git a/target/linux/ixp4xx/Makefile b/target/linux/ixp4xx/Makefile
new file mode 100644
index 0000000..c1874fa
--- /dev/null
+++ b/target/linux/ixp4xx/Makefile
@@ -0,0 +1,23 @@
+#
+# Copyright (C) 2006-2011 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+include $(TOPDIR)/rules.mk
+
+ARCH:=armeb
+BOARD:=ixp4xx
+BOARDNAME:=Intel IXP4xx
+FEATURES:=squashfs
+MAINTAINER:=Imre Kaloz <kaloz@openwrt.org>
+SUBTARGETS=generic harddisk
+
+KERNEL_PATCHVER:=3.18
+
+include $(INCLUDE_DIR)/target.mk
+
+DEFAULT_PACKAGES += ixp4xx-microcode fconfig
+KERNELNAME:=zImage
+
+$(eval $(call BuildTarget))
diff --git a/target/linux/ixp4xx/base-files/lib/ixp4xx.sh b/target/linux/ixp4xx/base-files/lib/ixp4xx.sh
new file mode 100644
index 0000000..f7a6b76
--- /dev/null
+++ b/target/linux/ixp4xx/base-files/lib/ixp4xx.sh
@@ -0,0 +1,25 @@
+#!/bin/sh
+#
+# Copyright (C) 2012 OpenWrt.org
+#
+
+ixp4xx_board_name() {
+        local machine
+        local name
+
+        machine=$(awk 'BEGIN{FS="[ \t]+:[ \t]"} /Hardware/ {print $2}' /proc/cpuinfo)
+
+        case "$machine" in
+		"Gateworks Cambria"*)
+			name="cambria"
+			;;
+		"Gateworks Avila"*)
+			name="avila"
+			;;
+		*)
+			name="generic";
+			;;
+	esac
+
+	echo $name
+}
diff --git a/target/linux/ixp4xx/base-files/lib/preinit/05_set_ether_mac_ixp4xx b/target/linux/ixp4xx/base-files/lib/preinit/05_set_ether_mac_ixp4xx
new file mode 100644
index 0000000..adda197
--- /dev/null
+++ b/target/linux/ixp4xx/base-files/lib/preinit/05_set_ether_mac_ixp4xx
@@ -0,0 +1,32 @@
+#!/bin/sh
+
+set_ether_mac() {
+
+	RB_CONFIG="$(grep "RedBoot config" /proc/mtd | cut -d: -f1)"
+
+	for npe in eth0 eth1 eth2
+	do
+		if [ "$(ifconfig $npe 2>/dev/null | grep -c 00:00:00:00:00:00)" = "1" ]; then
+			ifconfig $npe hw ether $(fconfig -s -r -d /dev/$RB_CONFIG -n npe_"$npe"_esa)
+		fi
+	done
+
+	# Some developers should be shot on sight at Zcom/Netgear
+	# -- Fixup for the WG302v1, need someone with a WAG302v1 to fix that, too
+
+	if [ "$(ifconfig eth0 2>/dev/null | grep -c 00:00:00:00:00:00)" = "1" ]; then
+			ifconfig eth0 hw ether $(fconfig -s -r -d /dev/$RB_CONFIG -n zcom_npe_esa)
+	fi
+
+	# Others (*cough*, Tonze) are dumb enough to not handle mac addresses at all
+
+	if [ "$(ifconfig eth0 2>/dev/null | grep -c 00:00:00:00:00:00)" = "1" ]; then
+		ifconfig eth0 hw ether 00:11:22:33:44:55
+	fi
+	if [ "$(ifconfig eth1 2>/dev/null | grep -c 00:00:00:00:00:00)" = "1" ]; then
+		ifconfig eth1 hw ether 00:11:22:33:44:56
+	fi
+}
+
+boot_hook_add preinit_main set_ether_mac
+
diff --git a/target/linux/ixp4xx/base-files/lib/upgrade/platform.sh b/target/linux/ixp4xx/base-files/lib/upgrade/platform.sh
new file mode 100644
index 0000000..508a167
--- /dev/null
+++ b/target/linux/ixp4xx/base-files/lib/upgrade/platform.sh
@@ -0,0 +1,153 @@
+. /lib/ixp4xx.sh
+
+RAMFS_COPY_DATA="/lib/ixp4xx.sh"
+
+CI_BLKSZ=65536
+CI_LDADR=0x00800000
+
+platform_find_partitions() {
+	local first dev size erasesize name
+	while read dev size erasesize name; do
+		name=${name#'"'}; name=${name%'"'}
+		case "$name" in
+			vmlinux.bin.l7|kernel|linux|rootfs)
+				if [ -z "$first" ]; then
+					first="$name"
+				else
+					echo "$erasesize:$first:$name"
+					break
+				fi
+			;;
+		esac
+	done < /proc/mtd
+}
+
+platform_find_kernelpart() {
+	local part
+	for part in "${1%:*}" "${1#*:}"; do
+		case "$part" in
+			vmlinux.bin.l7|kernel|linux)
+				echo "$part"
+				break
+			;;
+		esac
+	done
+}
+
+platform_find_part_size() {
+	local first dev size erasesize name
+	while read dev size erasesize name; do
+		name=${name#'"'}; name=${name%'"'}
+		[ "$name" = "$1" ] && {
+			echo "$size"
+			break
+		}
+	done < /proc/mtd
+}
+
+platform_do_upgrade_combined() {
+	local partitions=$(platform_find_partitions)
+	local kernelpart=$(platform_find_kernelpart "${partitions#*:}")
+	local erase_size=$((0x${partitions%%:*})); partitions="${partitions#*:}"
+	local kern_part_size=0x$(platform_find_part_size "$kernelpart")
+	local kern_part_blocks=$(($kern_part_size / $CI_BLKSZ))
+	local kern_length=0x$(dd if="$1" bs=2 skip=1 count=4 2>/dev/null)
+	local kern_blocks=$(($kern_length / $CI_BLKSZ))
+	local root_blocks=$((0x$(dd if="$1" bs=2 skip=5 count=4 2>/dev/null) / $CI_BLKSZ))
+
+	v "platform_do_upgrade_combined"
+	v "partitions=$partitions"
+	v "kernelpart=$kernelpart"
+	v "kernel_part_size=$kern_part_size"
+	v "kernel_part_blocks=$kern_part_blocks"
+	v "kern_length=$kern_length"
+	v "erase_size=$erase_size"
+	v "kern_blocks=$kern_blocks"
+	v "root_blocks=$root_blocks"
+	v "kern_pad_blocks=$(($kern_part_blocks-$kern_blocks))"
+
+	if [ -n "$partitions" ] && [ -n "$kernelpart" ] && \
+	   [ ${kern_blocks:-0} -gt 0 ] && \
+	   [ ${root_blocks:-0} -gt 0 ] && \
+	   [ ${erase_size:-0} -gt 0 ];
+	then
+		local append=""
+		[ -f "$CONF_TAR" -a "$SAVE_CONFIG" -eq 1 ] && append="-j $CONF_TAR"
+
+		# write the kernel
+		dd if="$1" bs=$CI_BLKSZ skip=1 count=$kern_blocks 2>/dev/null | \
+			mtd -F$kernelpart:$kern_part_size:$CI_LDADR write - $kernelpart
+		# write the rootfs
+		dd if="$1" bs=$CI_BLKSZ skip=$((1+$kern_blocks)) count=$root_blocks 2>/dev/null | \
+			mtd $append write - rootfs
+	else
+		echo "invalid image"
+	fi
+}
+
+platform_check_image() {
+	local board=$(ixp4xx_board_name)
+	local magic="$(get_magic_word "$1")"
+	local partitions=$(platform_find_partitions)
+	local kernelpart=$(platform_find_kernelpart "${partitions#*:}")
+	local kern_part_size=0x$(platform_find_part_size "$kernelpart")
+	local kern_length=0x$(dd if="$1" bs=2 skip=1 count=4 2>/dev/null)
+
+	[ "$#" -gt 1 ] && return 1
+
+	case "$board" in
+	avila | cambria )
+		[ "$magic" != "4349" ] && {
+			echo "Invalid image. Use *-sysupgrade.bin files on this board"
+			return 1
+		}
+
+		kern_length_b=$(printf '%d' $kern_length)
+		kern_part_size_b=$(printf '%d' $kern_part_size)
+		if [ $kern_length_b -gt $kern_part_size_b ]; then
+			echo "Invalid image. Kernel size ($kern_length) exceeds kernel partition ($kern_part_size)"
+			return 1
+		fi
+
+		local md5_img=$(dd if="$1" bs=2 skip=9 count=16 2>/dev/null)
+		local md5_chk=$(dd if="$1" bs=$CI_BLKSZ skip=1 2>/dev/null | md5sum -); md5_chk="${md5_chk%% *}"
+		if [ -n "$md5_img" -a -n "$md5_chk" ] && [ "$md5_img" = "$md5_chk" ]; then
+			return 0
+		else
+			echo "Invalid image. Contents do not match checksum (image:$md5_img calculated:$md5_chk)"
+			return 1
+		fi
+
+		return 0
+		;;
+	esac
+
+	echo "Sysupgrade is not yet supported on $board."
+	return 1
+}
+
+platform_do_upgrade() {
+	local board=$(ixp4xx_board_name)
+
+	v "board=$board"
+	case "$board" in
+	avila | cambria )
+		platform_do_upgrade_combined "$ARGV"
+		;;
+	*)
+		default_do_upgrade "$ARGV"
+		;;
+	esac
+}
+
+disable_watchdog() {
+	v "killing watchdog"
+	killall watchdog
+	( ps | grep -v 'grep' | grep '/dev/watchdog' ) && {
+		echo 'Could not disable watchdog'
+		return 1
+	}
+}
+
+# CONFIG_WATCHDOG_NOWAYOUT=y - can't kill watchdog unless kernel cmdline has a mpcore_wdt.nowayout=0
+#append sysupgrade_pre_upgrade disable_watchdog
diff --git a/target/linux/ixp4xx/config-3.18 b/target/linux/ixp4xx/config-3.18
new file mode 100644
index 0000000..e8cbce6
--- /dev/null
+++ b/target/linux/ixp4xx/config-3.18
@@ -0,0 +1,237 @@
+CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_ARCH_ADI_COYOTE is not set
+CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
+CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
+CONFIG_ARCH_HAS_DMA_SET_COHERENT_MASK=y
+CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y
+CONFIG_ARCH_IXCDP1100=y
+CONFIG_ARCH_IXDP425=y
+CONFIG_ARCH_IXDP4XX=y
+CONFIG_ARCH_IXP4XX=y
+CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
+CONFIG_ARCH_NR_GPIO=0
+# CONFIG_ARCH_PRPMC1100 is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
+CONFIG_ARCH_SUPPORTS_BIG_ENDIAN=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_ARCH_USE_BUILTIN_BSWAP=y
+CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y
+CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
+CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
+CONFIG_ARM=y
+# CONFIG_ARM_CPU_SUSPEND is not set
+CONFIG_ARM_L1_CACHE_SHIFT=5
+CONFIG_ARM_NR_BANKS=8
+CONFIG_ARM_PATCH_PHYS_VIRT=y
+# CONFIG_ARM_THUMB is not set
+CONFIG_ATAGS=y
+CONFIG_BOUNCE=y
+# CONFIG_CACHE_L2X0 is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_CLKSRC_MMIO=y
+CONFIG_CLONE_BACKWARDS=y
+CONFIG_CMDLINE="root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200"
+CONFIG_CMDLINE_FROM_BOOTLOADER=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5T=y
+CONFIG_CPU_BIG_ENDIAN=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+CONFIG_CPU_ENDIAN_BE32=y
+# CONFIG_CPU_ENDIAN_BE8 is not set
+CONFIG_CPU_IXP43X=y
+CONFIG_CPU_IXP46X=y
+CONFIG_CPU_PABRT_LEGACY=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_USE_DOMAINS=y
+CONFIG_CPU_XSCALE=y
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_LL_INCLUDE="debug/8250.S"
+CONFIG_DEBUG_UART_8250=y
+# CONFIG_DEBUG_UART_8250_FLOW_CONTROL is not set
+CONFIG_DEBUG_UART_8250_SHIFT=2
+# CONFIG_DEBUG_UART_8250_WORD is not set
+CONFIG_DEBUG_UART_PHYS=0xc8000003
+# CONFIG_DEBUG_UART_PL01X is not set
+CONFIG_DEBUG_UART_VIRT=0xfef00003
+# CONFIG_DEBUG_USER is not set
+CONFIG_DMABOUNCE=y
+CONFIG_DNOTIFY=y
+CONFIG_EEPROM_AT24=y
+CONFIG_FRAME_POINTER=y
+CONFIG_GENERIC_ATOMIC64=y
+CONFIG_GENERIC_BUG=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_GENERIC_IDLE_POLL_SETUP=y
+CONFIG_GENERIC_IO=y
+CONFIG_GENERIC_IRQ_SHOW=y
+CONFIG_GENERIC_PCI_IOMAP=y
+CONFIG_GENERIC_SCHED_CLOCK=y
+CONFIG_GENERIC_SMP_IDLE_THREAD=y
+CONFIG_GENERIC_STRNCPY_FROM_USER=y
+CONFIG_GENERIC_STRNLEN_USER=y
+CONFIG_GPIOLIB=y
+CONFIG_GPIO_DEVRES=y
+CONFIG_GPIO_GW_I2C_PLD=y
+CONFIG_GPIO_SYSFS=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_HAS_DMA=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
+CONFIG_HAVE_ARCH_JUMP_LABEL=y
+CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_HAVE_ARCH_PFN_VALID=y
+CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
+CONFIG_HAVE_BPF_JIT=y
+CONFIG_HAVE_CC_STACKPROTECTOR=y
+CONFIG_HAVE_CONTEXT_TRACKING=y
+CONFIG_HAVE_C_RECORDMCOUNT=y
+CONFIG_HAVE_DEBUG_KMEMLEAK=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_HAVE_DMA_CONTIGUOUS=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_HAVE_IDE=y
+CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_LZ4=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_HAVE_KERNEL_LZO=y
+CONFIG_HAVE_KERNEL_XZ=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_HAVE_MEMBLOCK=y
+CONFIG_HAVE_NET_DSA=y
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_PERF_EVENTS=y
+CONFIG_HAVE_PERF_REGS=y
+CONFIG_HAVE_PERF_USER_STACK_DUMP=y
+CONFIG_HAVE_PROC_CPU=y
+CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
+CONFIG_HAVE_UID16=y
+CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
+CONFIG_HWMON=y
+CONFIG_HWMON_VID=y
+CONFIG_HW_RANDOM=y
+CONFIG_HW_RANDOM_IXP4XX=y
+CONFIG_HZ_FIXED=0
+CONFIG_HZ_PERIODIC=y
+CONFIG_I2C=y
+CONFIG_I2C_ALGOBIT=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_GPIO=y
+# CONFIG_I2C_IOP3XX is not set
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_IOMMU_HELPER=y
+CONFIG_IP_PIMSM_V1=y
+CONFIG_IP_PIMSM_V2=y
+CONFIG_IRQ_FORCED_THREADING=y
+CONFIG_IRQ_WORK=y
+# CONFIG_IWMMXT is not set
+CONFIG_IXP4XX_ETH=y
+# CONFIG_IXP4XX_INDIRECT_PCI is not set
+CONFIG_IXP4XX_NPE=y
+CONFIG_IXP4XX_QMGR=y
+CONFIG_IXP4XX_WATCHDOG=y
+CONFIG_KTIME_SCALAR=y
+CONFIG_LEDS_FSG=y
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_LATCH=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+CONFIG_MACH_AP1000=y
+CONFIG_MACH_AP42X=y
+# CONFIG_MACH_ARCOM_VULCAN is not set
+CONFIG_MACH_AVILA=y
+CONFIG_MACH_CAMBRIA=y
+CONFIG_MACH_COMPEXWP18=y
+# CONFIG_MACH_DEVIXP is not set
+CONFIG_MACH_DSMG600=y
+CONFIG_MACH_FSG=y
+CONFIG_MACH_GATEWAY7001=y
+# CONFIG_MACH_GORAMO_MLR is not set
+# CONFIG_MACH_GTWX5715 is not set
+# CONFIG_MACH_IXDP465 is not set
+CONFIG_MACH_IXDPG425=y
+# CONFIG_MACH_KIXRP435 is not set
+CONFIG_MACH_LOFT=y
+CONFIG_MACH_MI424WR=y
+# CONFIG_MACH_MIC256 is not set
+# CONFIG_MACH_MICCPT is not set
+CONFIG_MACH_NAS100D=y
+CONFIG_MACH_NSLU2=y
+CONFIG_MACH_PRONGHORN=y
+CONFIG_MACH_PRONGHORNMETRO=y
+CONFIG_MACH_SIDEWINDER=y
+CONFIG_MACH_TW2662=y
+CONFIG_MACH_TW5334=y
+CONFIG_MACH_USR8200=y
+CONFIG_MACH_WG302V1=y
+CONFIG_MACH_WG302V2=y
+CONFIG_MACH_WRT300NV2=y
+CONFIG_MDIO_BOARDINFO=y
+CONFIG_MIGHT_HAVE_PCI=y
+CONFIG_MODULES_USE_ELF_REL=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+# CONFIG_MTD_CFI_GEOMETRY is not set
+CONFIG_MTD_IXP4XX=y
+CONFIG_MTD_OTP=y
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_REDBOOT_PARTS=y
+CONFIG_NEED_DMA_MAP_STATE=y
+CONFIG_NEED_KUSER_HELPERS=y
+CONFIG_NEED_MACH_IO_H=y
+CONFIG_NEED_PER_CPU_KM=y
+CONFIG_NET_VENDOR_XSCALE=y
+CONFIG_NO_BOOTMEM=y
+CONFIG_OLD_SIGACTION=y
+CONFIG_OLD_SIGSUSPEND3=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PCI=y
+CONFIG_PERF_USE_VMALLOC=y
+CONFIG_PHYLIB=y
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_RCU_STALL_COMMON is not set
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_DS1672=y
+CONFIG_RTC_DRV_ISL1208=y
+CONFIG_RTC_DRV_PCF8563=y
+CONFIG_RTC_DRV_X1205=y
+CONFIG_SCHED_HRTICK=y
+# CONFIG_SCSI_DMA is not set
+CONFIG_SENSORS_AD7418=y
+CONFIG_SENSORS_GSC=y
+CONFIG_SENSORS_MAX6650=y
+CONFIG_SENSORS_W83781D=y
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+CONFIG_SPLIT_PTLOCK_CPUS=999999
+CONFIG_SWIOTLB=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_TICK_CPU_ACCOUNTING=y
+CONFIG_UID16=y
+CONFIG_UNCOMPRESS_INCLUDE="mach/uncompress.h"
+CONFIG_USB_EHCI_BIG_ENDIAN_DESC=y
+CONFIG_USB_EHCI_BIG_ENDIAN_MMIO=y
+CONFIG_USB_SUPPORT=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_WATCHDOG_NOWAYOUT=y
+CONFIG_XZ_DEC_ARM=y
+CONFIG_XZ_DEC_BCJ=y
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_ZBOOT_ROM_TEXT=0x0
diff --git a/target/linux/ixp4xx/config-4.1 b/target/linux/ixp4xx/config-4.1
new file mode 100644
index 0000000..f05779e
--- /dev/null
+++ b/target/linux/ixp4xx/config-4.1
@@ -0,0 +1,250 @@
+CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_ARCH_ADI_COYOTE is not set
+CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
+CONFIG_ARCH_HAS_DMA_SET_COHERENT_MASK=y
+CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
+CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
+# CONFIG_ARCH_HAS_SG_CHAIN is not set
+CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_IXCDP1100=y
+CONFIG_ARCH_IXDP425=y
+CONFIG_ARCH_IXDP4XX=y
+CONFIG_ARCH_IXP4XX=y
+CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
+CONFIG_ARCH_NR_GPIO=0
+# CONFIG_ARCH_PRPMC1100 is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
+CONFIG_ARCH_SUPPORTS_BIG_ENDIAN=y
+CONFIG_ARCH_SUPPORTS_UPROBES=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_ARCH_USE_BUILTIN_BSWAP=y
+CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y
+CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
+CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
+CONFIG_ARM=y
+# CONFIG_ARM_CPU_SUSPEND is not set
+CONFIG_ARM_L1_CACHE_SHIFT=5
+CONFIG_ARM_PATCH_PHYS_VIRT=y
+# CONFIG_ARM_THUMB is not set
+CONFIG_ATAGS=y
+CONFIG_BOUNCE=y
+# CONFIG_CACHE_L2X0 is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_CLKSRC_MMIO=y
+CONFIG_CLONE_BACKWARDS=y
+CONFIG_CMDLINE="root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200"
+CONFIG_CMDLINE_FROM_BOOTLOADER=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5T=y
+CONFIG_CPU_BIG_ENDIAN=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+CONFIG_CPU_ENDIAN_BE32=y
+# CONFIG_CPU_ENDIAN_BE8 is not set
+CONFIG_CPU_IXP43X=y
+CONFIG_CPU_IXP46X=y
+CONFIG_CPU_PABRT_LEGACY=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_USE_DOMAINS=y
+CONFIG_CPU_XSCALE=y
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_LL_INCLUDE="debug/8250.S"
+CONFIG_DEBUG_UART_8250=y
+# CONFIG_DEBUG_UART_8250_FLOW_CONTROL is not set
+CONFIG_DEBUG_UART_8250_SHIFT=2
+# CONFIG_DEBUG_UART_8250_WORD is not set
+CONFIG_DEBUG_UART_PHYS=0xc8000003
+CONFIG_DEBUG_UART_VIRT=0xfef00003
+# CONFIG_DEBUG_USER is not set
+CONFIG_DMABOUNCE=y
+CONFIG_DNOTIFY=y
+CONFIG_EEPROM_AT24=y
+CONFIG_FRAME_POINTER=y
+CONFIG_GENERIC_ALLOCATOR=y
+CONFIG_GENERIC_ATOMIC64=y
+CONFIG_GENERIC_BUG=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_IDLE_POLL_SETUP=y
+CONFIG_GENERIC_IO=y
+CONFIG_GENERIC_IRQ_SHOW=y
+CONFIG_GENERIC_IRQ_SHOW_LEVEL=y
+CONFIG_GENERIC_PCI_IOMAP=y
+CONFIG_GENERIC_SCHED_CLOCK=y
+CONFIG_GENERIC_SMP_IDLE_THREAD=y
+CONFIG_GENERIC_STRNCPY_FROM_USER=y
+CONFIG_GENERIC_STRNLEN_USER=y
+CONFIG_GPIOLIB=y
+CONFIG_GPIO_DEVRES=y
+CONFIG_GPIO_GW_I2C_PLD=y
+CONFIG_GPIO_SYSFS=y
+CONFIG_HANDLE_DOMAIN_IRQ=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_HAS_DMA=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT_MAP=y
+# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
+CONFIG_HAVE_ARCH_AUDITSYSCALL=y
+# CONFIG_HAVE_ARCH_BITREVERSE is not set
+CONFIG_HAVE_ARCH_JUMP_LABEL=y
+CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_HAVE_ARCH_PFN_VALID=y
+CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
+CONFIG_HAVE_BPF_JIT=y
+CONFIG_HAVE_CC_STACKPROTECTOR=y
+CONFIG_HAVE_CONTEXT_TRACKING=y
+CONFIG_HAVE_C_RECORDMCOUNT=y
+CONFIG_HAVE_DEBUG_KMEMLEAK=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_HAVE_DMA_CONTIGUOUS=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_HAVE_IDE=y
+CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_LZ4=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_HAVE_KERNEL_LZO=y
+CONFIG_HAVE_KERNEL_XZ=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_HAVE_MEMBLOCK=y
+CONFIG_HAVE_NET_DSA=y
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_OPTPROBES=y
+CONFIG_HAVE_PERF_EVENTS=y
+CONFIG_HAVE_PERF_REGS=y
+CONFIG_HAVE_PERF_USER_STACK_DUMP=y
+CONFIG_HAVE_PROC_CPU=y
+CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
+CONFIG_HAVE_UID16=y
+CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
+CONFIG_HWMON=y
+CONFIG_HWMON_VID=y
+CONFIG_HW_RANDOM=y
+CONFIG_HW_RANDOM_IXP4XX=y
+CONFIG_HZ_FIXED=0
+CONFIG_HZ_PERIODIC=y
+CONFIG_I2C=y
+CONFIG_I2C_ALGOBIT=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_GPIO=y
+# CONFIG_I2C_IOP3XX is not set
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_IOMMU_HELPER=y
+CONFIG_IP_PIMSM_V1=y
+CONFIG_IP_PIMSM_V2=y
+CONFIG_IRQ_FORCED_THREADING=y
+CONFIG_IRQ_WORK=y
+# CONFIG_IWMMXT is not set
+CONFIG_IXP4XX_ETH=y
+# CONFIG_IXP4XX_INDIRECT_PCI is not set
+CONFIG_IXP4XX_NPE=y
+CONFIG_IXP4XX_QMGR=y
+CONFIG_IXP4XX_WATCHDOG=y
+CONFIG_LEDS_FSG=y
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_LATCH=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_LZ4_COMPRESS is not set
+# CONFIG_LZ4_DECOMPRESS is not set
+CONFIG_MACH_AP1000=y
+CONFIG_MACH_AP42X=y
+# CONFIG_MACH_ARCOM_VULCAN is not set
+CONFIG_MACH_AVILA=y
+CONFIG_MACH_CAMBRIA=y
+CONFIG_MACH_COMPEXWP18=y
+# CONFIG_MACH_DEVIXP is not set
+CONFIG_MACH_DSMG600=y
+CONFIG_MACH_FSG=y
+CONFIG_MACH_GATEWAY7001=y
+# CONFIG_MACH_GORAMO_MLR is not set
+# CONFIG_MACH_GTWX5715 is not set
+# CONFIG_MACH_IXDP465 is not set
+CONFIG_MACH_IXDPG425=y
+# CONFIG_MACH_KIXRP435 is not set
+CONFIG_MACH_LOFT=y
+CONFIG_MACH_MI424WR=y
+# CONFIG_MACH_MIC256 is not set
+# CONFIG_MACH_MICCPT is not set
+CONFIG_MACH_NAS100D=y
+CONFIG_MACH_NSLU2=y
+CONFIG_MACH_PRONGHORN=y
+CONFIG_MACH_PRONGHORNMETRO=y
+CONFIG_MACH_SIDEWINDER=y
+CONFIG_MACH_TW2662=y
+CONFIG_MACH_TW5334=y
+CONFIG_MACH_USR8200=y
+CONFIG_MACH_WG302V1=y
+CONFIG_MACH_WG302V2=y
+CONFIG_MACH_WRT300NV2=y
+CONFIG_MDIO_BOARDINFO=y
+CONFIG_MIGHT_HAVE_PCI=y
+CONFIG_MODULES_USE_ELF_REL=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+# CONFIG_MTD_CFI_GEOMETRY is not set
+CONFIG_MTD_IXP4XX=y
+CONFIG_MTD_OTP=y
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_REDBOOT_PARTS=y
+CONFIG_NEED_DMA_MAP_STATE=y
+CONFIG_NEED_KUSER_HELPERS=y
+CONFIG_NEED_MACH_IO_H=y
+CONFIG_NEED_PER_CPU_KM=y
+CONFIG_NET_PTP_CLASSIFY=y
+CONFIG_NET_VENDOR_XSCALE=y
+CONFIG_NO_BOOTMEM=y
+CONFIG_OLD_SIGACTION=y
+CONFIG_OLD_SIGSUSPEND3=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PCI=y
+# CONFIG_PCI_DOMAINS_GENERIC is not set
+CONFIG_PERF_USE_VMALLOC=y
+CONFIG_PGTABLE_LEVELS=2
+CONFIG_PHYLIB=y
+# CONFIG_RCU_EXPEDITE_BOOT is not set
+# CONFIG_RCU_STALL_COMMON is not set
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_DS1672=y
+CONFIG_RTC_DRV_ISL1208=y
+CONFIG_RTC_DRV_PCF8563=y
+CONFIG_RTC_DRV_X1205=y
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_SCHED_HRTICK=y
+# CONFIG_SCSI_DMA is not set
+CONFIG_SENSORS_AD7418=y
+CONFIG_SENSORS_GSC=y
+CONFIG_SENSORS_MAX6650=y
+CONFIG_SENSORS_W83781D=y
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+CONFIG_SPLIT_PTLOCK_CPUS=999999
+CONFIG_SRCU=y
+CONFIG_SWIOTLB=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_TICK_CPU_ACCOUNTING=y
+CONFIG_UID16=y
+CONFIG_UNCOMPRESS_INCLUDE="mach/uncompress.h"
+CONFIG_USB_EHCI_BIG_ENDIAN_DESC=y
+CONFIG_USB_EHCI_BIG_ENDIAN_MMIO=y
+CONFIG_USB_SUPPORT=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_WATCHDOG_NOWAYOUT=y
+CONFIG_XZ_DEC_ARM=y
+CONFIG_XZ_DEC_BCJ=y
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_ZBOOT_ROM_TEXT=0x0
diff --git a/target/linux/ixp4xx/generic/profiles/100-Default.mk b/target/linux/ixp4xx/generic/profiles/100-Default.mk
new file mode 100644
index 0000000..c881c80
--- /dev/null
+++ b/target/linux/ixp4xx/generic/profiles/100-Default.mk
@@ -0,0 +1,17 @@
+#
+# Copyright (C) 2006 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+define Profile/Default
+  NAME:=Default Profile
+  PACKAGES:=kmod-ath5k
+endef
+
+define Profile/Default/Description
+	Default IXP4xx Profile
+endef
+$(eval $(call Profile,Default))
+
diff --git a/target/linux/ixp4xx/generic/profiles/105-Atheros-ath5k.mk b/target/linux/ixp4xx/generic/profiles/105-Atheros-ath5k.mk
new file mode 100644
index 0000000..8f74277
--- /dev/null
+++ b/target/linux/ixp4xx/generic/profiles/105-Atheros-ath5k.mk
@@ -0,0 +1,17 @@
+#
+# Copyright (C) 2006-2008 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+define Profile/Atheros-ath5k
+  NAME:=Atheros WiFi (atk5k)
+  PACKAGES:=kmod-ath5k
+endef
+
+define Profile/Atheros-ath5k/Description
+	Package set compatible with hardware using Atheros WiFi cards
+endef
+$(eval $(call Profile,Atheros-ath5k))
+
diff --git a/target/linux/ixp4xx/generic/profiles/200-NSLU2.mk b/target/linux/ixp4xx/generic/profiles/200-NSLU2.mk
new file mode 100644
index 0000000..93febb0
--- /dev/null
+++ b/target/linux/ixp4xx/generic/profiles/200-NSLU2.mk
@@ -0,0 +1,19 @@
+#
+# Copyright (C) 2006-2008 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+define Profile/NSLU2
+  NAME:=Linksys NSLU2
+  PACKAGES:=-wpad-mini -kmod-ath5k kmod-scsi-core \
+	kmod-usb-core kmod-usb-ohci-pci kmod-usb2-pci kmod-usb-storage \
+	kmod-fs-ext4
+endef
+
+define Profile/NSLU2/Description
+	Package set optimized for the Linksys NSLU2
+endef
+$(eval $(call Profile,NSLU2))
+
diff --git a/target/linux/ixp4xx/generic/profiles/300-NAS100d.mk b/target/linux/ixp4xx/generic/profiles/300-NAS100d.mk
new file mode 100644
index 0000000..28ac79c
--- /dev/null
+++ b/target/linux/ixp4xx/generic/profiles/300-NAS100d.mk
@@ -0,0 +1,21 @@
+#
+# Copyright (C) 2006 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+define Profile/NAS100d
+  NAME:=Iomega NAS 100d
+  PACKAGES:=kmod-ath5k \
+	kmod-scsi-core \
+	kmod-ata-core kmod-ata-artop \
+	kmod-usb-core kmod-usb2-pci kmod-usb-storage \
+	kmod-fs-ext4
+endef
+
+define Profile/NAS100d/Description
+	Package set optimized for the Iomega NAS 100d
+endef
+$(eval $(call Profile,NAS100d))
+
diff --git a/target/linux/ixp4xx/generic/profiles/400-DSMG600RevA.mk b/target/linux/ixp4xx/generic/profiles/400-DSMG600RevA.mk
new file mode 100644
index 0000000..c8b53a8
--- /dev/null
+++ b/target/linux/ixp4xx/generic/profiles/400-DSMG600RevA.mk
@@ -0,0 +1,22 @@
+#
+# Copyright (C) 2006 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+define Profile/DSMG600RevA
+  NAME:=DSM-G600 Rev A
+  PACKAGES:=kmod-via-velocity \
+	kmod-ath5k \
+	kmod-scsi-core \
+	kmod-ata-core kmod-ata-artop \
+	kmod-usb-core kmod-usb-uhci kmod-usb2-pci kmod-usb-storage \
+	kmod-fs-ext4
+endef
+
+define Profile/DSMG600RevA/Description
+	Package set optimized for the DSM-G600 Rev A
+endef
+$(eval $(call Profile,DSMG600RevA))
+
diff --git a/target/linux/ixp4xx/generic/profiles/500-USR8200.mk b/target/linux/ixp4xx/generic/profiles/500-USR8200.mk
new file mode 100644
index 0000000..02ee059
--- /dev/null
+++ b/target/linux/ixp4xx/generic/profiles/500-USR8200.mk
@@ -0,0 +1,19 @@
+#
+# Copyright (C) 2006-2008 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+define Profile/USR8200
+  NAME:=USRobotics USR8200
+  PACKAGES:=-wpad-mini kmod-scsi-core \
+	kmod-usb-core kmod-usb-uhci kmod-usb2-pci kmod-usb-storage \
+	kmod-fs-ext4 kmod-firewire kmod-firewire-ohci kmod-firewire-sbp2
+endef
+
+define Profile/USR8200/Description
+	Package set optimized for the USRobotics USR8200
+endef
+$(eval $(call Profile,USR8200))
+
diff --git a/target/linux/ixp4xx/generic/target.mk b/target/linux/ixp4xx/generic/target.mk
new file mode 100644
index 0000000..f03e2a8
--- /dev/null
+++ b/target/linux/ixp4xx/generic/target.mk
@@ -0,0 +1,9 @@
+BOARDNAME:=Generic
+
+DEFAULT_PACKAGES+= wpad-mini
+
+define Target/Description
+	Build firmware images for ixp4xx based boards that boot from internal flash
+	(e.g : Linksys NSLU2, ...)
+endef
+
diff --git a/target/linux/ixp4xx/harddisk/config-default b/target/linux/ixp4xx/harddisk/config-default
new file mode 100644
index 0000000..78e599c
--- /dev/null
+++ b/target/linux/ixp4xx/harddisk/config-default
@@ -0,0 +1,20 @@
+CONFIG_ATA=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_CMDLINE="root=/dev/sda1 noinitrd console=ttyS0,115200"
+CONFIG_EXT4_FS=y
+CONFIG_JBD=y
+CONFIG_REISERFS_FS=y
+CONFIG_SATA_VIA=y
+CONFIG_USB=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_EHCI_HCD=y
+# CONFIG_USB_EHCI_HCD_PLATFORM is not set
+CONFIG_USB_EHCI_ROOT_HUB_TT=y
+CONFIG_USB_EHCI_SPLIT_ISO=y
+CONFIG_USB_EHCI_TT_NEWSCHED=y
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_HCD_PLATFORM is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+CONFIG_USB_STORAGE=y
diff --git a/target/linux/ixp4xx/harddisk/profiles/100-FSG3.mk b/target/linux/ixp4xx/harddisk/profiles/100-FSG3.mk
new file mode 100644
index 0000000..21f5e1f
--- /dev/null
+++ b/target/linux/ixp4xx/harddisk/profiles/100-FSG3.mk
@@ -0,0 +1,20 @@
+#
+# Copyright (C) 2006 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+define Profile/FSG3
+  NAME:=Freecom FSG-3
+  PACKAGES:= \
+	kmod-ath5k \
+	kmod-usb-core kmod-usb-uhci kmod-usb2-pci kmod-usb-storage \
+	kmod-fs-ext4 kmod-fs-reiserfs
+endef
+
+define Profile/FSG3/Description
+	Package set optimized for the Freecom FSG-3
+endef
+$(eval $(call Profile,FSG3))
+
diff --git a/target/linux/ixp4xx/harddisk/target.mk b/target/linux/ixp4xx/harddisk/target.mk
new file mode 100644
index 0000000..c71065e
--- /dev/null
+++ b/target/linux/ixp4xx/harddisk/target.mk
@@ -0,0 +1,6 @@
+BOARDNAME:=Internal Hard-Disk
+
+define Target/Description
+	Build firmware images for ixp4xx based boards that boot directly from internal disk storage
+	(e.g : Freecom FSG-3, ...)
+endef
diff --git a/target/linux/ixp4xx/image/Makefile b/target/linux/ixp4xx/image/Makefile
new file mode 100644
index 0000000..bbd62f0
--- /dev/null
+++ b/target/linux/ixp4xx/image/Makefile
@@ -0,0 +1,71 @@
+# 
+# Copyright (C) 2006-2010 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+include $(TOPDIR)/rules.mk
+include $(INCLUDE_DIR)/image.mk
+
+ifdef CONFIG_PACKAGE_apex
+  define Image/Build/Linksys
+	BIN_DIR=$(BIN_DIR) $(TOPDIR)/scripts/slugimage.pl \
+		-L $(KDIR)/apex-$(2)-armeb.bin \
+		-k $(BIN_DIR)/$(IMG_PREFIX)-$(2)-zImage \
+		-r rootfs:$(BIN_DIR)/$(IMG_PREFIX)-$(1).img \
+		-p -o $(BIN_DIR)/$(IMG_PREFIX)-$(2)-$(1).bin
+	BIN_DIR=$(BIN_DIR) $(TOPDIR)/scripts/slugimage.pl \
+		-F -L $(KDIR)/apex-$(2)-16mb-armeb.bin \
+		-k $(BIN_DIR)/$(IMG_PREFIX)-$(2)-zImage \
+		-r rootfs:$(BIN_DIR)/$(IMG_PREFIX)-$(1).img \
+		-p -o $(BIN_DIR)/$(IMG_PREFIX)-$(2)-$(1)-16mb.bin
+  endef
+endif
+
+define Image/Build/Freecom
+	$(INSTALL_DIR) $(TARGET_DIR)/boot
+	# TODO: Add special CMDLINE shim for webupgrade image here
+	$(CP) $(BIN_DIR)/$(IMG_PREFIX)-$(2)-zImage $(TARGET_DIR)/zImage
+	$(TAR) cfj $(BIN_DIR)/$(IMG_PREFIX)-$(2)-$(1).img --numeric-owner --owner=0 --group=0 -C $(TARGET_DIR)/ .
+	$(STAGING_DIR_HOST)/bin/encode_crc $(BIN_DIR)/$(IMG_PREFIX)-$(2)-$(1).img $(BIN_DIR)/$(IMG_PREFIX)-$(2)-$(1)-webupgrade.img
+	rm -f $(TARGET_DIR)/zImage
+endef
+
+define Image/BuildKernel
+	cp $(KDIR)/zImage $(BIN_DIR)/$(IMG_PREFIX)-zImage
+	BIN_DIR=$(BIN_DIR) IMG_PREFIX="$(IMG_PREFIX)" $(TOPDIR)/scripts/arm-magic.sh
+endef
+
+# Build sysupgrade image
+define BuildFirmware/Generic
+	dd if=$(KDIR)/zImage of=$(KDIR)/zImage.pad bs=64k conv=sync; \
+	dd if=$(KDIR)/root.$(1) of=$(KDIR)/root.$(1).pad bs=128k conv=sync; \
+	sh $(TOPDIR)/scripts/combined-image.sh \
+		$(KDIR)/zImage.pad \
+		$(KDIR)/root.$(1).pad \
+		$(BIN_DIR)/$(IMG_PREFIX)-$(patsubst jffs2-%,jffs2,$(patsubst squashfs-%,squashfs,$(1)))-sysupgrade.bin
+endef
+
+define Image/Build
+	$(call Image/Build/$(1),$(1))
+	$(call BuildFirmware/Generic,$(1))
+endef
+
+define Image/Build/jffs2-64k
+	dd if=$(KDIR)/root.$(1) of=$(BIN_DIR)/$(IMG_PREFIX)-$(1).img bs=65536 conv=sync
+endef
+
+define Image/Build/jffs2-128k
+	dd if=$(KDIR)/root.$(1) of=$(BIN_DIR)/$(IMG_PREFIX)-$(1).img bs=131072 conv=sync
+	$(call Image/Build/Linksys,$(1),nslu2,$(1))
+	$(call Image/Build/Freecom,$(1),fsg3,$(1))
+endef
+
+define Image/Build/squashfs
+	$(call prepare_generic_squashfs,$(KDIR)/root.squashfs)
+	dd if=$(KDIR)/root.$(1) of=$(BIN_DIR)/$(IMG_PREFIX)-$(1).img bs=131072 conv=sync
+	$(call Image/Build/Linksys,$(1),nslu2,$(1))
+	$(call Image/Build/Freecom,$(1),fsg3,$(1))
+endef
+
+$(eval $(call BuildImage))
diff --git a/target/linux/ixp4xx/modules.mk b/target/linux/ixp4xx/modules.mk
new file mode 100644
index 0000000..2d6446c
--- /dev/null
+++ b/target/linux/ixp4xx/modules.mk
@@ -0,0 +1,74 @@
+#
+# Copyright (C) 2010 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+define KernelPackage/ata-ixp4xx-cf
+  SUBMENU:=$(BLOCK_MENU)
+  TITLE:=IXP4XX Compact Flash support
+  DEPENDS:=@TARGET_ixp4xx
+  KCONFIG:=CONFIG_PATA_IXP4XX_CF
+  FILES:=$(LINUX_DIR)/drivers/ata/pata_ixp4xx_cf.ko
+  AUTOLOAD:=$(call AutoLoad,41,pata_ixp4xx_cf,1)
+  $(call AddDepends/ata)
+endef
+
+define KernelPackage/ata-ixp4xx-cf/description
+ IXP4XX Compact Flash support.
+endef
+
+$(eval $(call KernelPackage,ata-ixp4xx-cf))
+
+
+define KernelPackage/ixp4xx-beeper
+  SUBMENU:=$(OTHER_MENU)
+  TITLE:=IXP4XX Beeper support
+  DEPENDS:=@TARGET_ixp4xx +kmod-input-core
+  KCONFIG:= \
+	CONFIG_INPUT_MISC=y \
+	CONFIG_INPUT_IXP4XX_BEEPER
+  FILES:=$(LINUX_DIR)/drivers/input/misc/ixp4xx-beeper.ko
+  AUTOLOAD:=$(call AutoLoad,50,ixp4xx-beeper)
+  $(call AddDepends/input)
+endef
+
+define KernelPackage/ixp4xx-beeper/description
+ IXP4XX Beeper support
+endef
+
+$(eval $(call KernelPackage,ixp4xx-beeper))
+
+
+define KernelPackage/crypto-hw-ixp4xx
+  TITLE:=Intel IXP4xx hardware crypto module
+  DEPENDS:=@TARGET_ixp4xx
+  KCONFIG:= \
+	CONFIG_CRYPTO_DEV_IXP4XX
+  FILES:=$(LINUX_DIR)/drivers/crypto/ixp4xx_crypto.ko
+  AUTOLOAD:=$(call AutoLoad,90,ixp4xx_crypto)
+  $(call AddDepends/crypto,+kmod-crypto-authenc +kmod-crypto-des)
+endef
+
+define KernelPackage/crypto-hw-ixp4xx/description
+  Kernel support for the Intel IXP4xx HW crypto engine.
+endef
+
+$(eval $(call KernelPackage,crypto-hw-ixp4xx))
+
+
+define KernelPackage/ixp4xx-eth
+  SUBMENU:=$(NETWORK_DEVICES_MENU)
+  TITLE:=IXP4xxt Ethernet Adapter kernel support
+  DEPENDS:=@TARGET_ixp4xx
+  KCONFIG:=CONFIG_IXP4XX_ETH
+  FILES:=$(LINUX_DIR)/drivers/net/ethernet/xscale/ixp4xx_eth.ko
+  AUTOLOAD:=$(call AutoLoad,50,ixp4xx_eth)
+endef
+
+define KernelPackage/ixp4xx-eth/description
+ Kernel modules for Intel IXP4xx Ethernet chipsets.
+endef
+
+$(eval $(call KernelPackage,ixp4xx-eth))
diff --git a/target/linux/ixp4xx/patches-3.18/001-arm-ixp4xx-set-cohorent_dma_mask-for-ethernet-platfo.patch b/target/linux/ixp4xx/patches-3.18/001-arm-ixp4xx-set-cohorent_dma_mask-for-ethernet-platfo.patch
new file mode 100644
index 0000000..3ca3eb7
--- /dev/null
+++ b/target/linux/ixp4xx/patches-3.18/001-arm-ixp4xx-set-cohorent_dma_mask-for-ethernet-platfo.patch
@@ -0,0 +1,136 @@
+From 7113f56b683c5123df5c20724ac813cee66fa21a Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jogo@openwrt.org>
+Date: Mon, 1 Jul 2013 16:49:05 +0200
+Subject: [PATCH 1/2] arm: ixp4xx: set cohorent_dma_mask for ethernet platform
+ devices
+
+ARM requires the cohorent_dma_mask set, so set it for the platform
+devices so that the ethernet driver has access to it.
+
+Signed-off-by: Jonas Gorski <jogo@openwrt.org>
+---
+ arch/arm/mach-ixp4xx/fsg-setup.c     |    2 ++
+ arch/arm/mach-ixp4xx/goramo_mlr.c    |    2 ++
+ arch/arm/mach-ixp4xx/ixdp425-setup.c |    3 +++
+ arch/arm/mach-ixp4xx/nas100d-setup.c |    1 +
+ arch/arm/mach-ixp4xx/nslu2-setup.c   |    1 +
+ arch/arm/mach-ixp4xx/omixp-setup.c   |    3 +++
+ arch/arm/mach-ixp4xx/vulcan-setup.c  |    2 ++
+ 7 files changed, 14 insertions(+)
+
+--- a/arch/arm/mach-ixp4xx/fsg-setup.c
++++ b/arch/arm/mach-ixp4xx/fsg-setup.c
+@@ -142,12 +142,14 @@ static struct platform_device fsg_eth[]
+ 		.id			= IXP4XX_ETH_NPEB,
+ 		.dev = {
+ 			.platform_data	= fsg_plat_eth,
++			.coherent_dma_mask = DMA_BIT_MASK(32),
+ 		},
+ 	}, {
+ 		.name			= "ixp4xx_eth",
+ 		.id			= IXP4XX_ETH_NPEC,
+ 		.dev = {
+ 			.platform_data	= fsg_plat_eth + 1,
++			.coherent_dma_mask = DMA_BIT_MASK(32),
+ 		},
+ 	}
+ };
+--- a/arch/arm/mach-ixp4xx/goramo_mlr.c
++++ b/arch/arm/mach-ixp4xx/goramo_mlr.c
+@@ -295,10 +295,12 @@ static struct platform_device device_eth
+ 		.name			= "ixp4xx_eth",
+ 		.id			= IXP4XX_ETH_NPEB,
+ 		.dev.platform_data	= eth_plat,
++		.dev.coherent_dma_mask	= DMA_BIT_MASK(32),
+ 	}, {
+ 		.name			= "ixp4xx_eth",
+ 		.id			= IXP4XX_ETH_NPEC,
+ 		.dev.platform_data	= eth_plat + 1,
++		.dev.coherent_dma_mask	= DMA_BIT_MASK(32),
+ 	}
+ };
+ 
+--- a/arch/arm/mach-ixp4xx/ixdp425-setup.c
++++ b/arch/arm/mach-ixp4xx/ixdp425-setup.c
+@@ -20,6 +20,7 @@
+ #include <linux/mtd/nand.h>
+ #include <linux/mtd/partitions.h>
+ #include <linux/delay.h>
++#include <linux/dma-mapping.h>
+ #include <linux/gpio.h>
+ #include <asm/types.h>
+ #include <asm/setup.h>
+@@ -196,10 +197,12 @@ static struct platform_device ixdp425_et
+ 		.name			= "ixp4xx_eth",
+ 		.id			= IXP4XX_ETH_NPEB,
+ 		.dev.platform_data	= ixdp425_plat_eth,
++		.dev.coherent_dma_mask	= DMA_BIT_MASK(32),
+ 	}, {
+ 		.name			= "ixp4xx_eth",
+ 		.id			= IXP4XX_ETH_NPEC,
+ 		.dev.platform_data	= ixdp425_plat_eth + 1,
++		.dev.coherent_dma_mask	= DMA_BIT_MASK(32),
+ 	}
+ };
+ 
+--- a/arch/arm/mach-ixp4xx/nas100d-setup.c
++++ b/arch/arm/mach-ixp4xx/nas100d-setup.c
+@@ -170,6 +170,7 @@ static struct platform_device nas100d_et
+ 		.name			= "ixp4xx_eth",
+ 		.id			= IXP4XX_ETH_NPEB,
+ 		.dev.platform_data	= nas100d_plat_eth,
++		.dev.coherent_dma_mask	= DMA_BIT_MASK(32),
+ 	}
+ };
+ 
+--- a/arch/arm/mach-ixp4xx/nslu2-setup.c
++++ b/arch/arm/mach-ixp4xx/nslu2-setup.c
+@@ -182,6 +182,7 @@ static struct platform_device nslu2_eth[
+ 		.name			= "ixp4xx_eth",
+ 		.id			= IXP4XX_ETH_NPEB,
+ 		.dev.platform_data	= nslu2_plat_eth,
++		.dev.coherent_dma_mask	= DMA_BIT_MASK(32),
+ 	}
+ };
+ 
+--- a/arch/arm/mach-ixp4xx/omixp-setup.c
++++ b/arch/arm/mach-ixp4xx/omixp-setup.c
+@@ -17,6 +17,7 @@
+ #include <linux/serial_8250.h>
+ #include <linux/mtd/mtd.h>
+ #include <linux/mtd/partitions.h>
++#include <linux/dma-mapping.h>
+ #include <linux/leds.h>
+ 
+ #include <asm/setup.h>
+@@ -188,10 +189,12 @@ static struct platform_device ixdp425_et
+ 		.name			= "ixp4xx_eth",
+ 		.id			= IXP4XX_ETH_NPEB,
+ 		.dev.platform_data	= ixdp425_plat_eth,
++		.dev.coherent_dma_mask	= DMA_BIT_MASK(32),
+ 	}, {
+ 		.name			= "ixp4xx_eth",
+ 		.id			= IXP4XX_ETH_NPEC,
+ 		.dev.platform_data	= ixdp425_plat_eth + 1,
++		.dev.coherent_dma_mask	= DMA_BIT_MASK(32),
+ 	},
+ };
+ 
+--- a/arch/arm/mach-ixp4xx/vulcan-setup.c
++++ b/arch/arm/mach-ixp4xx/vulcan-setup.c
+@@ -139,6 +139,7 @@ static struct platform_device vulcan_eth
+ 		.id			= IXP4XX_ETH_NPEB,
+ 		.dev = {
+ 			.platform_data	= &vulcan_plat_eth[0],
++			.coherent_dma_mask = DMA_BIT_MASK(32),
+ 		},
+ 	},
+ 	[1] = {
+@@ -146,6 +147,7 @@ static struct platform_device vulcan_eth
+ 		.id			= IXP4XX_ETH_NPEC,
+ 		.dev = {
+ 			.platform_data	= &vulcan_plat_eth[1],
++			.coherent_dma_mask = DMA_BIT_MASK(32),
+ 		},
+ 	},
+ };
diff --git a/target/linux/ixp4xx/patches-3.18/002-ixp4xx_eth-use-parent-device-for-dma-allocations.patch b/target/linux/ixp4xx/patches-3.18/002-ixp4xx_eth-use-parent-device-for-dma-allocations.patch
new file mode 100644
index 0000000..ceaf21b
--- /dev/null
+++ b/target/linux/ixp4xx/patches-3.18/002-ixp4xx_eth-use-parent-device-for-dma-allocations.patch
@@ -0,0 +1,95 @@
+From 1d67040af0144c549f4db8144d2ccc253ff8639c Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jogo@openwrt.org>
+Date: Mon, 1 Jul 2013 16:39:28 +0200
+Subject: [PATCH 2/2] net: ixp4xx_eth: use parent device for dma allocations
+
+Now that the platfomr device provides a dma_cohorent_mask, use it for
+dma operations.
+
+This fixes ethernet on ixp4xx which was broken since 3.7.
+
+Signed-off-by: Jonas Gorski <jogo@openwrt.org>
+---
+ drivers/net/ethernet/xscale/ixp4xx_eth.c |   23 ++++++++++++-----------
+ 1 file changed, 12 insertions(+), 11 deletions(-)
+
+--- a/drivers/net/ethernet/xscale/ixp4xx_eth.c
++++ b/drivers/net/ethernet/xscale/ixp4xx_eth.c
+@@ -657,10 +657,10 @@ static inline void queue_put_desc(unsign
+ static inline void dma_unmap_tx(struct port *port, struct desc *desc)
+ {
+ #ifdef __ARMEB__
+-	dma_unmap_single(&port->netdev->dev, desc->data,
++	dma_unmap_single(port->netdev->dev.parent, desc->data,
+ 			 desc->buf_len, DMA_TO_DEVICE);
+ #else
+-	dma_unmap_single(&port->netdev->dev, desc->data & ~3,
++	dma_unmap_single(port->netdev->dev.parent, desc->data & ~3,
+ 			 ALIGN((desc->data & 3) + desc->buf_len, 4),
+ 			 DMA_TO_DEVICE);
+ #endif
+@@ -727,9 +727,9 @@ static int eth_poll(struct napi_struct *
+ 
+ #ifdef __ARMEB__
+ 		if ((skb = netdev_alloc_skb(dev, RX_BUFF_SIZE))) {
+-			phys = dma_map_single(&dev->dev, skb->data,
++			phys = dma_map_single(dev->dev.parent, skb->data,
+ 					      RX_BUFF_SIZE, DMA_FROM_DEVICE);
+-			if (dma_mapping_error(&dev->dev, phys)) {
++			if (dma_mapping_error(dev->dev.parent, phys)) {
+ 				dev_kfree_skb(skb);
+ 				skb = NULL;
+ 			}
+@@ -752,10 +752,11 @@ static int eth_poll(struct napi_struct *
+ #ifdef __ARMEB__
+ 		temp = skb;
+ 		skb = port->rx_buff_tab[n];
+-		dma_unmap_single(&dev->dev, desc->data - NET_IP_ALIGN,
++		dma_unmap_single(dev->dev.parent, desc->data - NET_IP_ALIGN,
+ 				 RX_BUFF_SIZE, DMA_FROM_DEVICE);
+ #else
+-		dma_sync_single_for_cpu(&dev->dev, desc->data - NET_IP_ALIGN,
++		dma_sync_single_for_cpu(dev->dev.parent,
++					desc->data - NET_IP_ALIGN,
+ 					RX_BUFF_SIZE, DMA_FROM_DEVICE);
+ 		memcpy_swab32((u32 *)skb->data, (u32 *)port->rx_buff_tab[n],
+ 			      ALIGN(NET_IP_ALIGN + desc->pkt_len, 4) / 4);
+@@ -874,7 +875,7 @@ static int eth_xmit(struct sk_buff *skb,
+ 	memcpy_swab32(mem, (u32 *)((int)skb->data & ~3), bytes / 4);
+ #endif
+ 
+-	phys = dma_map_single(&dev->dev, mem, bytes, DMA_TO_DEVICE);
++	phys = dma_map_single(dev->dev.parent, mem, bytes, DMA_TO_DEVICE);
+ 	if (dma_mapping_error(&dev->dev, phys)) {
+ 		dev_kfree_skb(skb);
+ #ifndef __ARMEB__
+@@ -1124,7 +1125,7 @@ static int init_queues(struct port *port
+ 	int i;
+ 
+ 	if (!ports_open) {
+-		dma_pool = dma_pool_create(DRV_NAME, &port->netdev->dev,
++		dma_pool = dma_pool_create(DRV_NAME, port->netdev->dev.parent,
+ 					   POOL_ALLOC_SIZE, 32, 0);
+ 		if (!dma_pool)
+ 			return -ENOMEM;
+@@ -1152,9 +1153,9 @@ static int init_queues(struct port *port
+ 		data = buff;
+ #endif
+ 		desc->buf_len = MAX_MRU;
+-		desc->data = dma_map_single(&port->netdev->dev, data,
++		desc->data = dma_map_single(port->netdev->dev.parent, data,
+ 					    RX_BUFF_SIZE, DMA_FROM_DEVICE);
+-		if (dma_mapping_error(&port->netdev->dev, desc->data)) {
++		if (dma_mapping_error(port->netdev->dev.parent, desc->data)) {
+ 			free_buffer(buff);
+ 			return -EIO;
+ 		}
+@@ -1174,7 +1175,7 @@ static void destroy_queues(struct port *
+ 			struct desc *desc = rx_desc_ptr(port, i);
+ 			buffer_t *buff = port->rx_buff_tab[i];
+ 			if (buff) {
+-				dma_unmap_single(&port->netdev->dev,
++				dma_unmap_single(port->netdev->dev.parent,
+ 						 desc->data - NET_IP_ALIGN,
+ 						 RX_BUFF_SIZE, DMA_FROM_DEVICE);
+ 				free_buffer(buff);
diff --git a/target/linux/ixp4xx/patches-3.18/020-gateworks_i2c_pld.patch b/target/linux/ixp4xx/patches-3.18/020-gateworks_i2c_pld.patch
new file mode 100644
index 0000000..4732d16
--- /dev/null
+++ b/target/linux/ixp4xx/patches-3.18/020-gateworks_i2c_pld.patch
@@ -0,0 +1,421 @@
+--- a/drivers/gpio/Kconfig
++++ b/drivers/gpio/Kconfig
+@@ -794,6 +794,14 @@ config GPIO_RDC321X
+ 	  Support for the RDC R321x SoC GPIOs over southbridge
+ 	  PCI configuration space.
+ 
++config GPIO_GW_I2C_PLD
++	tristate "Gateworks I2C PLD GPIO Expander"
++	depends on I2C
++	help
++		Say yes here to provide access to the Gateworks I2C PLD GPIO
++		Expander. This is used at least on the GW2358-4.
++
++
+ comment "SPI GPIO expanders:"
+ 
+ config GPIO_MAX7301
+--- a/drivers/gpio/Makefile
++++ b/drivers/gpio/Makefile
+@@ -106,3 +106,4 @@ obj-$(CONFIG_GPIO_XILINX)	+= gpio-xilinx
+ obj-$(CONFIG_GPIO_XTENSA)	+= gpio-xtensa.o
+ obj-$(CONFIG_GPIO_ZEVIO)	+= gpio-zevio.o
+ obj-$(CONFIG_GPIO_ZYNQ)		+= gpio-zynq.o
++obj-$(CONFIG_GPIO_GW_I2C_PLD)	+= gw_i2c_pld.o
+--- /dev/null
++++ b/drivers/gpio/gw_i2c_pld.c
+@@ -0,0 +1,371 @@
++/*
++ * Gateworks I2C PLD GPIO expander
++ *
++ * Copyright (C) 2009 Gateworks Corporation
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
++ */
++
++#include <linux/kernel.h>
++#include <linux/slab.h>
++#include <linux/hardirq.h>
++#include <linux/i2c.h>
++#include <linux/i2c/gw_i2c_pld.h>
++#include <linux/module.h>
++#include <linux/export.h>
++#include <asm/gpio.h>
++#include <mach/hardware.h>
++
++static const struct i2c_device_id gw_i2c_pld_id[] = {
++	{ "gw_i2c_pld", 8 },
++	{ }
++};
++MODULE_DEVICE_TABLE(i2c, gw_i2c_pld_id);
++
++/*
++ * The Gateworks I2C PLD chip only expose one read and one
++ * write register.  Writing a "one" bit (to match the reset state) lets
++ * that pin be used as an input. It is an open-drain model.
++ */
++
++struct gw_i2c_pld {
++	struct gpio_chip	chip;
++	struct i2c_client	*client;
++	unsigned		out;		/* software latch */
++};
++
++/*-------------------------------------------------------------------------*/
++
++/*
++ * The Gateworks I2C PLD chip does not properly send the acknowledge bit
++ * thus we cannot use standard i2c_smbus functions. We have recreated
++ * our own here, but we still use the rt_mutex_lock to lock the i2c_bus
++ * as the device still exists on the I2C bus.
++*/
++
++#define PLD_SCL_GPIO 6
++#define PLD_SDA_GPIO 7
++
++#define SCL_LO()  gpio_line_set(PLD_SCL_GPIO, IXP4XX_GPIO_LOW)
++#define SCL_HI()  gpio_line_set(PLD_SCL_GPIO, IXP4XX_GPIO_HIGH)
++#define SCL_EN()  gpio_line_config(PLD_SCL_GPIO, IXP4XX_GPIO_OUT)
++#define SDA_LO()  gpio_line_set(PLD_SDA_GPIO, IXP4XX_GPIO_LOW)
++#define SDA_HI()  gpio_line_set(PLD_SDA_GPIO, IXP4XX_GPIO_HIGH)
++#define SDA_EN()  gpio_line_config(PLD_SDA_GPIO, IXP4XX_GPIO_OUT)
++#define SDA_DIS() gpio_line_config(PLD_SDA_GPIO, IXP4XX_GPIO_IN)
++#define SDA_IN(x) gpio_line_get(PLD_SDA_GPIO, &x);
++
++static int i2c_pld_write_byte(int address, int byte)
++{
++	int i;
++
++	address = (address << 1) & ~0x1;
++
++	SDA_HI();
++	SDA_EN();
++	SCL_EN();
++	SCL_HI();
++	SDA_LO();
++	SCL_LO();
++
++	for (i = 7; i >= 0; i--)
++	{
++		if (address & (1 << i))
++			SDA_HI();
++		else
++			SDA_LO();
++
++		SCL_HI();
++		SCL_LO();
++	}
++
++	SDA_DIS();
++	SCL_HI();
++	SDA_IN(i);
++	SCL_LO();
++	SDA_EN();
++
++	for (i = 7; i >= 0; i--)
++	{
++		if (byte & (1 << i))
++      SDA_HI();
++		else
++			SDA_LO();
++		SCL_HI();
++		SCL_LO();
++	}
++
++	SDA_DIS();
++	SCL_HI();
++	SDA_IN(i);
++	SCL_LO();
++
++	SDA_HI();
++	SDA_EN();
++
++	SDA_LO();
++	SCL_HI();
++	SDA_HI();
++	SCL_LO();
++	SCL_HI();
++
++	return 0;
++}
++
++static unsigned int i2c_pld_read_byte(int address)
++{
++	int i = 0, byte = 0;
++	int bit;
++
++	address = (address << 1) | 0x1;
++
++	SDA_HI();
++	SDA_EN();
++	SCL_EN();
++	SCL_HI();
++	SDA_LO();
++	SCL_LO();
++
++	for (i = 7; i >= 0; i--)
++	{
++		if (address & (1 << i))
++			SDA_HI();
++		else
++			SDA_LO();
++
++		SCL_HI();
++		SCL_LO();
++	}
++
++	SDA_DIS();
++	SCL_HI();
++	SDA_IN(i);
++	SCL_LO();
++	SDA_EN();
++
++	SDA_DIS();
++	for (i = 7; i >= 0; i--)
++	{
++		SCL_HI();
++		SDA_IN(bit);
++		byte |= bit << i;
++		SCL_LO();
++	}
++
++	SDA_LO();
++	SCL_HI();
++	SDA_HI();
++	SCL_LO();
++	SCL_HI();
++
++	return byte;
++}
++
++
++static int gw_i2c_pld_input8(struct gpio_chip *chip, unsigned offset)
++{
++	int ret;
++	struct gw_i2c_pld *gpio = container_of(chip, struct gw_i2c_pld, chip);
++	struct i2c_adapter *adap = gpio->client->adapter;
++
++	if (in_atomic() || irqs_disabled()) {
++		ret = rt_mutex_trylock(&adap->bus_lock);
++		if (!ret)
++			/* I2C activity is ongoing. */
++			return -EAGAIN;
++	} else {
++		rt_mutex_lock(&adap->bus_lock);
++	}
++
++	gpio->out |= (1 << offset);
++
++	ret = i2c_pld_write_byte(gpio->client->addr, gpio->out);
++
++	rt_mutex_unlock(&adap->bus_lock);
++
++	return ret;
++}
++
++static int gw_i2c_pld_get8(struct gpio_chip *chip, unsigned offset)
++{
++	int ret;
++	s32	value;
++	struct gw_i2c_pld *gpio = container_of(chip, struct gw_i2c_pld, chip);
++	struct i2c_adapter *adap = gpio->client->adapter;
++
++	if (in_atomic() || irqs_disabled()) {
++		ret = rt_mutex_trylock(&adap->bus_lock);
++		if (!ret)
++			/* I2C activity is ongoing. */
++			return -EAGAIN;
++	} else {
++		rt_mutex_lock(&adap->bus_lock);
++	}
++
++	value = i2c_pld_read_byte(gpio->client->addr);
++
++	rt_mutex_unlock(&adap->bus_lock);
++
++	return (value < 0) ? 0 : (value & (1 << offset));
++}
++
++static int gw_i2c_pld_output8(struct gpio_chip *chip, unsigned offset, int value)
++{
++	int ret;
++
++	struct gw_i2c_pld *gpio = container_of(chip, struct gw_i2c_pld, chip);
++	struct i2c_adapter *adap = gpio->client->adapter;
++
++	unsigned bit = 1 << offset;
++
++	if (in_atomic() || irqs_disabled()) {
++		ret = rt_mutex_trylock(&adap->bus_lock);
++		if (!ret)
++			/* I2C activity is ongoing. */
++			return -EAGAIN;
++	} else {
++		rt_mutex_lock(&adap->bus_lock);
++	}
++
++
++	if (value)
++		gpio->out |= bit;
++	else
++		gpio->out &= ~bit;
++
++	ret = i2c_pld_write_byte(gpio->client->addr, gpio->out);
++
++	rt_mutex_unlock(&adap->bus_lock);
++
++	return ret;
++}
++
++static void gw_i2c_pld_set8(struct gpio_chip *chip, unsigned offset, int value)
++{
++	gw_i2c_pld_output8(chip, offset, value);
++}
++
++/*-------------------------------------------------------------------------*/
++
++static int gw_i2c_pld_probe(struct i2c_client *client,
++			 const struct i2c_device_id *id)
++{
++	struct gw_i2c_pld_platform_data	*pdata;
++	struct gw_i2c_pld *gpio;
++	int status;
++
++	pdata = client->dev.platform_data;
++	if (!pdata)
++		return -ENODEV;
++
++	/* Allocate, initialize, and register this gpio_chip. */
++	gpio = kzalloc(sizeof *gpio, GFP_KERNEL);
++	if (!gpio)
++		return -ENOMEM;
++
++	gpio->chip.base = pdata->gpio_base;
++	gpio->chip.can_sleep = 1;
++	gpio->chip.dev = &client->dev;
++	gpio->chip.owner = THIS_MODULE;
++
++	gpio->chip.ngpio = pdata->nr_gpio;
++	gpio->chip.direction_input = gw_i2c_pld_input8;
++	gpio->chip.get = gw_i2c_pld_get8;
++	gpio->chip.direction_output = gw_i2c_pld_output8;
++	gpio->chip.set = gw_i2c_pld_set8;
++
++	gpio->chip.label = client->name;
++
++	gpio->client = client;
++	i2c_set_clientdata(client, gpio);
++
++	gpio->out = 0xFF;
++
++	status = gpiochip_add(&gpio->chip);
++	if (status < 0)
++		goto fail;
++
++	dev_info(&client->dev, "gpios %d..%d on a %s%s\n",
++			gpio->chip.base,
++			gpio->chip.base + gpio->chip.ngpio - 1,
++			client->name,
++			client->irq ? " (irq ignored)" : "");
++
++	/* Let platform code set up the GPIOs and their users.
++	 * Now is the first time anyone could use them.
++	 */
++	if (pdata->setup) {
++		status = pdata->setup(client,
++				gpio->chip.base, gpio->chip.ngpio,
++				pdata->context);
++		if (status < 0)
++			dev_warn(&client->dev, "setup --> %d\n", status);
++	}
++
++	return 0;
++
++fail:
++	dev_dbg(&client->dev, "probe error %d for '%s'\n",
++			status, client->name);
++	kfree(gpio);
++	return status;
++}
++
++static int gw_i2c_pld_remove(struct i2c_client *client)
++{
++	struct gw_i2c_pld_platform_data	*pdata = client->dev.platform_data;
++	struct gw_i2c_pld *gpio = i2c_get_clientdata(client);
++	int				status = 0;
++
++	if (pdata->teardown) {
++		status = pdata->teardown(client,
++				gpio->chip.base, gpio->chip.ngpio,
++				pdata->context);
++		if (status < 0) {
++			dev_err(&client->dev, "%s --> %d\n",
++					"teardown", status);
++			return status;
++		}
++	}
++
++	gpiochip_remove(&gpio->chip);
++	kfree(gpio);
++	return 0;
++}
++
++static struct i2c_driver gw_i2c_pld_driver = {
++	.driver = {
++		.name	= "gw_i2c_pld",
++		.owner	= THIS_MODULE,
++	},
++	.probe	= gw_i2c_pld_probe,
++	.remove	= gw_i2c_pld_remove,
++	.id_table = gw_i2c_pld_id,
++};
++
++static int __init gw_i2c_pld_init(void)
++{
++	return i2c_add_driver(&gw_i2c_pld_driver);
++}
++module_init(gw_i2c_pld_init);
++
++static void __exit gw_i2c_pld_exit(void)
++{
++	i2c_del_driver(&gw_i2c_pld_driver);
++}
++module_exit(gw_i2c_pld_exit);
++
++MODULE_LICENSE("GPL");
++MODULE_AUTHOR("Chris Lang");
+--- /dev/null
++++ b/include/linux/i2c/gw_i2c_pld.h
+@@ -0,0 +1,20 @@
++#ifndef __LINUX_GW_I2C_PLD_H
++#define __LINUX_GW_I2C_PLD_H
++
++/**
++ * The Gateworks I2C PLD Implements an additional 8 bits of GPIO through the PLD
++ */
++
++struct gw_i2c_pld_platform_data {
++	unsigned gpio_base;
++	unsigned nr_gpio;
++	int		(*setup)(struct i2c_client *client,
++					int gpio, unsigned ngpio,
++					void *context);
++	int		(*teardown)(struct i2c_client *client,
++					int gpio, unsigned ngpio,
++					void *context);
++	void		*context;
++};
++
++#endif /* __LINUX_GW_I2C_PLD_H */
diff --git a/target/linux/ixp4xx/patches-3.18/030-gpio_line_config.patch b/target/linux/ixp4xx/patches-3.18/030-gpio_line_config.patch
new file mode 100644
index 0000000..0e51793
--- /dev/null
+++ b/target/linux/ixp4xx/patches-3.18/030-gpio_line_config.patch
@@ -0,0 +1,73 @@
+--- a/arch/arm/mach-ixp4xx/common.c
++++ b/arch/arm/mach-ixp4xx/common.c
+@@ -93,22 +93,7 @@ void __init ixp4xx_map_io(void)
+ /*
+  * GPIO-functions
+  */
+-/*
+- * The following converted to the real HW bits the gpio_line_config
+- */
+-/* GPIO pin types */
+-#define IXP4XX_GPIO_OUT 		0x1
+-#define IXP4XX_GPIO_IN  		0x2
+-
+-/* GPIO signal types */
+-#define IXP4XX_GPIO_LOW			0
+-#define IXP4XX_GPIO_HIGH		1
+-
+-/* GPIO Clocks */
+-#define IXP4XX_GPIO_CLK_0		14
+-#define IXP4XX_GPIO_CLK_1		15
+-
+-static void gpio_line_config(u8 line, u32 direction)
++void gpio_line_config(u8 line, u32 direction)
+ {
+ 	if (direction == IXP4XX_GPIO_IN)
+ 		*IXP4XX_GPIO_GPOER |= (1 << line);
+@@ -116,17 +101,17 @@ static void gpio_line_config(u8 line, u3
+ 		*IXP4XX_GPIO_GPOER &= ~(1 << line);
+ }
+ 
+-static void gpio_line_get(u8 line, int *value)
++void gpio_line_get(u8 line, int *value)
+ {
+ 	*value = (*IXP4XX_GPIO_GPINR >> line) & 0x1;
+ }
+ 
+-static void gpio_line_set(u8 line, int value)
++void gpio_line_set(u8 line, int value)
+ {
+-	if (value == IXP4XX_GPIO_HIGH)
+-	    *IXP4XX_GPIO_GPOUTR |= (1 << line);
+-	else if (value == IXP4XX_GPIO_LOW)
++	if (value == IXP4XX_GPIO_LOW)
+ 	    *IXP4XX_GPIO_GPOUTR &= ~(1 << line);
++	else
++	    *IXP4XX_GPIO_GPOUTR |= (1 << line);
+ }
+ 
+ /*************************************************************************
+--- a/arch/arm/mach-ixp4xx/include/mach/platform.h
++++ b/arch/arm/mach-ixp4xx/include/mach/platform.h
+@@ -131,5 +131,21 @@ struct pci_sys_data;
+ extern int ixp4xx_setup(int nr, struct pci_sys_data *sys);
+ extern struct pci_ops ixp4xx_ops;
+ 
++/* GPIO pin types */
++#define IXP4XX_GPIO_OUT 		0x1
++#define IXP4XX_GPIO_IN  		0x2
++
++/* GPIO signal types */
++#define IXP4XX_GPIO_LOW			0
++#define IXP4XX_GPIO_HIGH		1
++
++/* GPIO Clocks */
++#define IXP4XX_GPIO_CLK_0		14
++#define IXP4XX_GPIO_CLK_1		15
++
++void gpio_line_config(u8 line, u32 direction);
++void gpio_line_get(u8 line, int *value);
++void gpio_line_set(u8 line, int value);
++
+ #endif // __ASSEMBLY__
+ 
diff --git a/target/linux/ixp4xx/patches-3.18/090-increase_entropy_pools.patch b/target/linux/ixp4xx/patches-3.18/090-increase_entropy_pools.patch
new file mode 100644
index 0000000..285505c
--- /dev/null
+++ b/target/linux/ixp4xx/patches-3.18/090-increase_entropy_pools.patch
@@ -0,0 +1,17 @@
+--- a/drivers/char/random.c
++++ b/drivers/char/random.c
+@@ -285,11 +285,11 @@
+ /*
+  * Configuration information
+  */
+-#define INPUT_POOL_SHIFT	12
++#define INPUT_POOL_SHIFT	13
+ #define INPUT_POOL_WORDS	(1 << (INPUT_POOL_SHIFT-5))
+-#define OUTPUT_POOL_SHIFT	10
++#define OUTPUT_POOL_SHIFT	11
+ #define OUTPUT_POOL_WORDS	(1 << (OUTPUT_POOL_SHIFT-5))
+-#define SEC_XFER_SIZE		512
++#define SEC_XFER_SIZE		1024
+ #define EXTRACT_SIZE		10
+ 
+ #define DEBUG_RANDOM_BOOT 0
diff --git a/target/linux/ixp4xx/patches-3.18/100-wg302v2_gateway7001_mac_plat_info.patch b/target/linux/ixp4xx/patches-3.18/100-wg302v2_gateway7001_mac_plat_info.patch
new file mode 100644
index 0000000..317103f
--- /dev/null
+++ b/target/linux/ixp4xx/patches-3.18/100-wg302v2_gateway7001_mac_plat_info.patch
@@ -0,0 +1,78 @@
+--- a/arch/arm/mach-ixp4xx/gateway7001-setup.c
++++ b/arch/arm/mach-ixp4xx/gateway7001-setup.c
+@@ -17,6 +17,7 @@
+ #include <linux/serial.h>
+ #include <linux/tty.h>
+ #include <linux/serial_8250.h>
++#include <linux/dma-mapping.h>
+ 
+ #include <asm/types.h>
+ #include <asm/setup.h>
+@@ -75,9 +76,37 @@ static struct platform_device gateway700
+ 	.resource	= &gateway7001_uart_resource,
+ };
+ 
++static struct eth_plat_info gateway7001_plat_eth[] = {
++	{
++		.phy		= 1,
++		.rxq		= 3,
++		.txreadyq	= 20,
++	}, {
++		.phy		= 2,
++		.rxq		= 4,
++		.txreadyq	= 21,
++	}
++};
++
++static struct platform_device gateway7001_eth[] = {
++	{
++		.name			= "ixp4xx_eth",
++		.id			= IXP4XX_ETH_NPEB,
++		.dev.platform_data	= gateway7001_plat_eth,
++		.dev.coherent_dma_mask	= DMA_BIT_MASK(32),
++	}, {
++		.name			= "ixp4xx_eth",
++		.id			= IXP4XX_ETH_NPEC,
++		.dev.platform_data	= gateway7001_plat_eth + 1,
++		.dev.coherent_dma_mask	= DMA_BIT_MASK(32),
++	}
++};
++
+ static struct platform_device *gateway7001_devices[] __initdata = {
+ 	&gateway7001_flash,
+-	&gateway7001_uart
++	&gateway7001_uart,
++	&gateway7001_eth[0],
++	&gateway7001_eth[1],
+ };
+ 
+ static void __init gateway7001_init(void)
+--- a/arch/arm/mach-ixp4xx/wg302v2-setup.c
++++ b/arch/arm/mach-ixp4xx/wg302v2-setup.c
+@@ -76,9 +76,26 @@ static struct platform_device wg302v2_ua
+ 	.resource	= &wg302v2_uart_resource,
+ };
+ 
++static struct eth_plat_info wg302v2_plat_eth[] = {
++	{
++		.phy		= 8,
++		.rxq		= 3,
++		.txreadyq	= 20,
++	}
++};
++
++static struct platform_device wg302v2_eth[] = {
++	{
++		.name			= "ixp4xx_eth",
++		.id			= IXP4XX_ETH_NPEB,
++		.dev.platform_data	= wg302v2_plat_eth,
++	}
++};
++
+ static struct platform_device *wg302v2_devices[] __initdata = {
+ 	&wg302v2_flash,
+ 	&wg302v2_uart,
++	&wg302v2_eth[0],
+ };
+ 
+ static void __init wg302v2_init(void)
diff --git a/target/linux/ixp4xx/patches-3.18/105-wg302v1_support.patch b/target/linux/ixp4xx/patches-3.18/105-wg302v1_support.patch
new file mode 100644
index 0000000..8793549
--- /dev/null
+++ b/target/linux/ixp4xx/patches-3.18/105-wg302v1_support.patch
@@ -0,0 +1,261 @@
+--- a/arch/arm/configs/ixp4xx_defconfig
++++ b/arch/arm/configs/ixp4xx_defconfig
+@@ -13,6 +13,7 @@ CONFIG_MACH_AVILA=y
+ CONFIG_MACH_LOFT=y
+ CONFIG_ARCH_ADI_COYOTE=y
+ CONFIG_MACH_GATEWAY7001=y
++CONFIG_MACH_WG302V1=y
+ CONFIG_MACH_WG302V2=y
+ CONFIG_ARCH_IXDP425=y
+ CONFIG_MACH_IXDPG425=y
+--- a/arch/arm/mach-ixp4xx/Kconfig
++++ b/arch/arm/mach-ixp4xx/Kconfig
+@@ -45,6 +45,14 @@ config MACH_GATEWAY7001
+ 	  7001 Access Point. For more information on this platform,
+ 	  see http://openwrt.org
+ 
++config MACH_WG302V1
++	bool "Netgear WG302 v1 / WAG302 v1"
++	select PCI
++	help
++	  Say 'Y' here if you want your kernel to support Netgear's
++	  WG302 v1 or WAG302 v1 Access Points. For more information
++	  on this platform, see http://openwrt.org
++
+ config MACH_WG302V2
+ 	bool "Netgear WG302 v2 / WAG302 v2"
+ 	select PCI
+--- a/arch/arm/mach-ixp4xx/Makefile
++++ b/arch/arm/mach-ixp4xx/Makefile
+@@ -15,6 +15,7 @@ obj-pci-$(CONFIG_MACH_NSLU2)		+= nslu2-p
+ obj-pci-$(CONFIG_MACH_NAS100D)		+= nas100d-pci.o
+ obj-pci-$(CONFIG_MACH_DSMG600)		+= dsmg600-pci.o
+ obj-pci-$(CONFIG_MACH_GATEWAY7001)	+= gateway7001-pci.o
++obj-pci-$(CONFIG_MACH_WG302V1)		+= wg302v1-pci.o
+ obj-pci-$(CONFIG_MACH_WG302V2)		+= wg302v2-pci.o
+ obj-pci-$(CONFIG_MACH_FSG)		+= fsg-pci.o
+ obj-pci-$(CONFIG_MACH_ARCOM_VULCAN)	+= vulcan-pci.o
+@@ -33,6 +34,7 @@ obj-$(CONFIG_MACH_NSLU2)	+= nslu2-setup.
+ obj-$(CONFIG_MACH_NAS100D)	+= nas100d-setup.o
+ obj-$(CONFIG_MACH_DSMG600)      += dsmg600-setup.o
+ obj-$(CONFIG_MACH_GATEWAY7001)	+= gateway7001-setup.o
++obj-$(CONFIG_MACH_WG302V1)	+= wg302v1-setup.o
+ obj-$(CONFIG_MACH_WG302V2)	+= wg302v2-setup.o
+ obj-$(CONFIG_MACH_FSG)		+= fsg-setup.o
+ obj-$(CONFIG_MACH_GORAMO_MLR)	+= goramo_mlr.o
+--- /dev/null
++++ b/arch/arm/mach-ixp4xx/wg302v1-pci.c
+@@ -0,0 +1,63 @@
++/*
++ * arch/arch/mach-ixp4xx/wg302v1-pci.c
++ *
++ * PCI setup routines for the Netgear WG302 v1 and WAG302 v1
++ *
++ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
++ *
++ * based on coyote-pci.c:
++ *	Copyright (C) 2002 Jungo Software Technologies.
++ *	Copyright (C) 2003 MontaVista Software, Inc.
++ *
++ * Maintainer: Imre Kaloz <kaloz@openwrt.org>
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ *
++ */
++
++#include <linux/kernel.h>
++#include <linux/pci.h>
++#include <linux/init.h>
++#include <linux/irq.h>
++
++#include <asm/mach-types.h>
++#include <mach/hardware.h>
++
++#include <asm/mach/pci.h>
++
++void __init wg302v1_pci_preinit(void)
++{
++	irq_set_irq_type(IRQ_IXP4XX_GPIO8, IRQ_TYPE_LEVEL_LOW);
++	irq_set_irq_type(IRQ_IXP4XX_GPIO10, IRQ_TYPE_LEVEL_LOW);
++
++	ixp4xx_pci_preinit();
++}
++
++static int __init wg302v1_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
++{
++	if (slot == 1)
++		return IRQ_IXP4XX_GPIO8;
++	else if (slot == 2)
++		return IRQ_IXP4XX_GPIO10;
++	else
++		return -1;
++}
++
++struct hw_pci wg302v1_pci __initdata = {
++	.nr_controllers = 1,
++	.preinit =        wg302v1_pci_preinit,
++	.ops =            &ixp4xx_ops,
++	.setup =          ixp4xx_setup,
++	.map_irq =        wg302v1_map_irq,
++};
++
++int __init wg302v1_pci_init(void)
++{
++	if (machine_is_wg302v1())
++		pci_common_init(&wg302v1_pci);
++	return 0;
++}
++
++subsys_initcall(wg302v1_pci_init);
+--- /dev/null
++++ b/arch/arm/mach-ixp4xx/wg302v1-setup.c
+@@ -0,0 +1,147 @@
++/*
++ * arch/arm/mach-ixp4xx/wg302v1-setup.c
++ *
++ * Board setup for the Netgear WG302 v1 and WAG302 v1
++ *
++ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
++ *
++ * based on coyote-setup.c:
++ *      Copyright (C) 2003-2005 MontaVista Software, Inc.
++ *
++ * Author: Imre Kaloz <kaloz@openwrt.org>
++ *
++ */
++
++#include <linux/kernel.h>
++#include <linux/init.h>
++#include <linux/device.h>
++#include <linux/serial.h>
++#include <linux/tty.h>
++#include <linux/serial_8250.h>
++#include <linux/slab.h>
++#include <linux/types.h>
++#include <linux/memory.h>
++#include <linux/dma-mapping.h>
++
++#include <asm/setup.h>
++#include <mach/hardware.h>
++#include <asm/irq.h>
++#include <asm/mach-types.h>
++#include <asm/mach/arch.h>
++#include <asm/mach/flash.h>
++
++static struct flash_platform_data wg302v1_flash_data = {
++	.map_name	= "cfi_probe",
++	.width		= 2,
++};
++
++static struct resource wg302v1_flash_resource = {
++	.flags		= IORESOURCE_MEM,
++};
++
++static struct platform_device wg302v1_flash = {
++	.name		= "IXP4XX-Flash",
++	.id		= 0,
++	.dev		= {
++		.platform_data = &wg302v1_flash_data,
++	},
++	.num_resources	= 1,
++	.resource	= &wg302v1_flash_resource,
++};
++
++static struct resource wg302v1_uart_resources[] = {
++	{
++		.start	= IXP4XX_UART1_BASE_PHYS,
++		.end	= IXP4XX_UART1_BASE_PHYS + 0x0fff,
++		.flags	= IORESOURCE_MEM,
++	},
++	{
++		.start	= IXP4XX_UART2_BASE_PHYS,
++		.end	= IXP4XX_UART2_BASE_PHYS + 0x0fff,
++		.flags	= IORESOURCE_MEM,
++	}
++};
++
++static struct plat_serial8250_port wg302v1_uart_data[] = {
++	{
++		.mapbase	= IXP4XX_UART1_BASE_PHYS,
++		.membase	= (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET,
++		.irq		= IRQ_IXP4XX_UART1,
++		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
++		.iotype		= UPIO_MEM,
++		.regshift	= 2,
++		.uartclk	= IXP4XX_UART_XTAL,
++	},
++	{
++		.mapbase	= IXP4XX_UART2_BASE_PHYS,
++		.membase	= (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
++		.irq		= IRQ_IXP4XX_UART2,
++		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
++		.iotype		= UPIO_MEM,
++		.regshift	= 2,
++		.uartclk	= IXP4XX_UART_XTAL,
++	},
++	{ },
++};
++
++static struct platform_device wg302v1_uart = {
++	.name		= "serial8250",
++	.id		= PLAT8250_DEV_PLATFORM,
++	.dev			= {
++		.platform_data	= wg302v1_uart_data,
++	},
++	.num_resources	= 2,
++	.resource	= wg302v1_uart_resources,
++};
++
++static struct eth_plat_info wg302v1_plat_eth[] = {
++	{
++		.phy		= 30,
++		.rxq		= 3,
++		.txreadyq	= 20,
++	}
++};
++
++static struct platform_device wg302v1_eth[] = {
++	{
++		.name			= "ixp4xx_eth",
++		.id			= IXP4XX_ETH_NPEB,
++		.dev.platform_data	= wg302v1_plat_eth,
++		.dev.coherent_dma_mask	= DMA_BIT_MASK(32),
++	}
++};
++
++static struct platform_device *wg302v1_devices[] __initdata = {
++	&wg302v1_flash,
++	&wg302v1_uart,
++	&wg302v1_eth[0],
++};
++
++static void __init wg302v1_init(void)
++{
++	ixp4xx_sys_init();
++
++	wg302v1_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
++	wg302v1_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + SZ_32M - 1;
++
++	*IXP4XX_EXP_CS0 |= IXP4XX_FLASH_WRITABLE;
++	*IXP4XX_EXP_CS1 = *IXP4XX_EXP_CS0;
++
++	platform_add_devices(wg302v1_devices, ARRAY_SIZE(wg302v1_devices));
++}
++
++#ifdef CONFIG_MACH_WG302V1
++MACHINE_START(WG302V1, "Netgear WG302 v1 / WAG302 v1")
++	/* Maintainer: Imre Kaloz <kaloz@openwrt.org> */
++	.fixup		= wg302v1_fixup,
++	.map_io		= ixp4xx_map_io,
++	.init_irq	= ixp4xx_init_irq,
++	.init_time	= ixp4xx_timer_init,
++	.atag_offset	= 0x0100,
++	.init_machine	= wg302v1_init,
++#if defined(CONFIG_PCI)
++	.dma_zone_size	= SZ_64M,
++#endif
++	.restart	= ixp4xx_restart,
++MACHINE_END
++#endif
diff --git a/target/linux/ixp4xx/patches-3.18/110-pronghorn_series_support.patch b/target/linux/ixp4xx/patches-3.18/110-pronghorn_series_support.patch
new file mode 100644
index 0000000..d1fdfcb
--- /dev/null
+++ b/target/linux/ixp4xx/patches-3.18/110-pronghorn_series_support.patch
@@ -0,0 +1,393 @@
+--- a/arch/arm/configs/ixp4xx_defconfig
++++ b/arch/arm/configs/ixp4xx_defconfig
+@@ -15,6 +15,8 @@ CONFIG_ARCH_ADI_COYOTE=y
+ CONFIG_MACH_GATEWAY7001=y
+ CONFIG_MACH_WG302V1=y
+ CONFIG_MACH_WG302V2=y
++CONFIG_MACH_PRONGHORN=y
++CONFIG_MACH_PRONGHORNMETRO=y
+ CONFIG_ARCH_IXDP425=y
+ CONFIG_MACH_IXDPG425=y
+ CONFIG_MACH_IXDP465=y
+--- a/arch/arm/mach-ixp4xx/Kconfig
++++ b/arch/arm/mach-ixp4xx/Kconfig
+@@ -61,6 +61,22 @@ config MACH_WG302V2
+ 	  WG302 v2 or WAG302 v2 Access Points. For more information
+ 	  on this platform, see http://openwrt.org
+ 
++config MACH_PRONGHORN
++	bool "ADI Pronghorn series"
++	select PCI
++	help
++	  Say 'Y' here if you want your kernel to support the ADI
++	  Engineering Pronghorn series. For more
++	  information on this platform, see http://www.adiengineering.com
++
++#
++# There're only minimal differences kernel-wise between the Pronghorn and
++# Pronghorn Metro boards - they use different chip selects to drive the
++# CF slot connected to the expansion bus, so we just enable them together.
++#
++config MACH_PRONGHORNMETRO
++	def_bool MACH_PRONGHORN
++
+ config ARCH_IXDP425
+ 	bool "IXDP425"
+ 	help
+--- a/arch/arm/mach-ixp4xx/Makefile
++++ b/arch/arm/mach-ixp4xx/Makefile
+@@ -19,6 +19,7 @@ obj-pci-$(CONFIG_MACH_WG302V1)		+= wg302
+ obj-pci-$(CONFIG_MACH_WG302V2)		+= wg302v2-pci.o
+ obj-pci-$(CONFIG_MACH_FSG)		+= fsg-pci.o
+ obj-pci-$(CONFIG_MACH_ARCOM_VULCAN)	+= vulcan-pci.o
++obj-pci-$(CONFIG_MACH_PRONGHORN)	+= pronghorn-pci.o
+ 
+ obj-y	+= common.o
+ 
+@@ -39,6 +40,7 @@ obj-$(CONFIG_MACH_WG302V2)	+= wg302v2-se
+ obj-$(CONFIG_MACH_FSG)		+= fsg-setup.o
+ obj-$(CONFIG_MACH_GORAMO_MLR)	+= goramo_mlr.o
+ obj-$(CONFIG_MACH_ARCOM_VULCAN)	+= vulcan-setup.o
++obj-$(CONFIG_MACH_PRONGHORN)	+= pronghorn-setup.o
+ 
+ obj-$(CONFIG_PCI)		+= $(obj-pci-$(CONFIG_PCI)) common-pci.o
+ obj-$(CONFIG_IXP4XX_QMGR)	+= ixp4xx_qmgr.o
+--- a/arch/arm/mach-ixp4xx/include/mach/uncompress.h
++++ b/arch/arm/mach-ixp4xx/include/mach/uncompress.h
+@@ -42,7 +42,8 @@ static __inline__ void __arch_decomp_set
+ 	 */
+ 	if (machine_is_adi_coyote() || machine_is_gtwx5715() ||
+ 	    machine_is_gateway7001() || machine_is_wg302v2() ||
+-	    machine_is_devixp() || machine_is_miccpt() || machine_is_mic256())
++	    machine_is_devixp() || machine_is_miccpt() || machine_is_mic256() ||
++	    machine_is_pronghorn() || machine_is_pronghorn_metro())
+ 		uart_base = (volatile u32*) IXP4XX_UART2_BASE_PHYS;
+ 	else
+ 		uart_base = (volatile u32*) IXP4XX_UART1_BASE_PHYS;
+--- /dev/null
++++ b/arch/arm/mach-ixp4xx/pronghorn-pci.c
+@@ -0,0 +1,69 @@
++/*
++ * arch/arch/mach-ixp4xx/pronghorn-pci.c
++ *
++ * PCI setup routines for ADI Engineering Pronghorn series
++ *
++ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
++ *
++ * based on coyote-pci.c:
++ *	Copyright (C) 2002 Jungo Software Technologies.
++ *	Copyright (C) 2003 MontaVista Softwrae, Inc.
++ *
++ * Maintainer: Imre Kaloz <kaloz@openwrt.org>
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ *
++ */
++
++#include <linux/kernel.h>
++#include <linux/pci.h>
++#include <linux/init.h>
++#include <linux/irq.h>
++
++#include <asm/mach-types.h>
++#include <mach/hardware.h>
++
++#include <asm/mach/pci.h>
++
++void __init pronghorn_pci_preinit(void)
++{
++	irq_set_irq_type(IRQ_IXP4XX_GPIO4, IRQ_TYPE_LEVEL_LOW);
++	irq_set_irq_type(IRQ_IXP4XX_GPIO6, IRQ_TYPE_LEVEL_LOW);
++	irq_set_irq_type(IRQ_IXP4XX_GPIO11, IRQ_TYPE_LEVEL_LOW);
++	irq_set_irq_type(IRQ_IXP4XX_GPIO1, IRQ_TYPE_LEVEL_LOW);
++
++	ixp4xx_pci_preinit();
++}
++
++static int __init pronghorn_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
++{
++	if (slot == 13)
++		return IRQ_IXP4XX_GPIO4;
++	else if (slot == 14)
++		return IRQ_IXP4XX_GPIO6;
++	else if (slot == 15)
++		return IRQ_IXP4XX_GPIO11;
++	else if (slot == 16)
++		return IRQ_IXP4XX_GPIO1;
++	else
++		return -1;
++}
++
++struct hw_pci pronghorn_pci __initdata = {
++	.nr_controllers	= 1,
++	.preinit	= pronghorn_pci_preinit,
++	.ops		= &ixp4xx_ops,
++	.setup		= ixp4xx_setup,
++	.map_irq	= pronghorn_map_irq,
++};
++
++int __init pronghorn_pci_init(void)
++{
++	if (machine_is_pronghorn() || machine_is_pronghorn_metro())
++		pci_common_init(&pronghorn_pci);
++	return 0;
++}
++
++subsys_initcall(pronghorn_pci_init);
+--- /dev/null
++++ b/arch/arm/mach-ixp4xx/pronghorn-setup.c
+@@ -0,0 +1,252 @@
++/*
++ * arch/arm/mach-ixp4xx/pronghorn-setup.c
++ *
++ * Board setup for the ADI Engineering Pronghorn series
++ *
++ * Copyright (C) 2008 Imre Kaloz <Kaloz@openwrt.org>
++ *
++ * based on coyote-setup.c:
++ *      Copyright (C) 2003-2005 MontaVista Software, Inc.
++ *
++ * Author: Imre Kaloz <Kaloz@openwrt.org>
++ */
++
++#include <linux/kernel.h>
++#include <linux/init.h>
++#include <linux/device.h>
++#include <linux/serial.h>
++#include <linux/tty.h>
++#include <linux/serial_8250.h>
++#include <linux/slab.h>
++#include <linux/types.h>
++#include <linux/memory.h>
++#include <linux/i2c-gpio.h>
++#include <linux/leds.h>
++#include <linux/dma-mapping.h>
++
++#include <asm/setup.h>
++#include <mach/hardware.h>
++#include <asm/irq.h>
++#include <asm/mach-types.h>
++#include <asm/mach/arch.h>
++#include <asm/mach/flash.h>
++
++static struct flash_platform_data pronghorn_flash_data = {
++	.map_name	= "cfi_probe",
++	.width		= 2,
++};
++
++static struct resource pronghorn_flash_resource = {
++	.flags		= IORESOURCE_MEM,
++};
++
++static struct platform_device pronghorn_flash = {
++	.name		= "IXP4XX-Flash",
++	.id		= 0,
++	.dev		= {
++		.platform_data	= &pronghorn_flash_data,
++	},
++	.num_resources	= 1,
++	.resource	= &pronghorn_flash_resource,
++};
++
++static struct resource pronghorn_uart_resources [] = {
++	{
++		.start		= IXP4XX_UART1_BASE_PHYS,
++		.end		= IXP4XX_UART1_BASE_PHYS + 0x0fff,
++		.flags		= IORESOURCE_MEM
++	},
++	{
++		.start		= IXP4XX_UART2_BASE_PHYS,
++		.end		= IXP4XX_UART2_BASE_PHYS + 0x0fff,
++		.flags		= IORESOURCE_MEM
++	}
++};
++
++static struct plat_serial8250_port pronghorn_uart_data[] = {
++	{
++		.mapbase	= IXP4XX_UART1_BASE_PHYS,
++		.membase	= (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET,
++		.irq		= IRQ_IXP4XX_UART1,
++		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
++		.iotype		= UPIO_MEM,
++		.regshift	= 2,
++		.uartclk	= IXP4XX_UART_XTAL,
++	},
++	{
++		.mapbase	= IXP4XX_UART2_BASE_PHYS,
++		.membase	= (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
++		.irq		= IRQ_IXP4XX_UART2,
++		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
++		.iotype		= UPIO_MEM,
++		.regshift	= 2,
++		.uartclk	= IXP4XX_UART_XTAL,
++	},
++	{ },
++};
++
++static struct platform_device pronghorn_uart = {
++	.name		= "serial8250",
++	.id		= PLAT8250_DEV_PLATFORM,
++	.dev		= {
++		.platform_data	= pronghorn_uart_data,
++	},
++	.num_resources	= 2,
++	.resource	= pronghorn_uart_resources,
++};
++
++static struct i2c_gpio_platform_data pronghorn_i2c_gpio_data = {
++	.sda_pin	= 9,
++	.scl_pin	= 10,
++};
++
++static struct platform_device pronghorn_i2c_gpio = {
++	.name		= "i2c-gpio",
++	.id		= 0,
++	.dev		= {
++		.platform_data	= &pronghorn_i2c_gpio_data,
++	},
++};
++
++static struct gpio_led pronghorn_led_pin[] = {
++	{
++		.name		= "pronghorn:green:status",
++		.gpio		= 7,
++	}
++};
++
++static struct gpio_led_platform_data pronghorn_led_data = {
++	.num_leds		= 1,
++	.leds			= pronghorn_led_pin,
++};
++
++static struct platform_device pronghorn_led = {
++	.name			= "leds-gpio",
++	.id			= -1,
++	.dev.platform_data	= &pronghorn_led_data,
++};
++
++static struct resource pronghorn_pata_resources[] = {
++	{
++		.flags	= IORESOURCE_MEM
++	},
++	{
++		.flags	= IORESOURCE_MEM,
++	},
++	{
++		.name	= "intrq",
++		.start	= IRQ_IXP4XX_GPIO0,
++		.end	= IRQ_IXP4XX_GPIO0,
++		.flags	= IORESOURCE_IRQ,
++	},
++};
++
++static struct ixp4xx_pata_data pronghorn_pata_data = {
++	.cs0_bits	= 0xbfff0043,
++	.cs1_bits	= 0xbfff0043,
++};
++
++static struct platform_device pronghorn_pata = {
++	.name			= "pata_ixp4xx_cf",
++	.id			= 0,
++	.dev.platform_data      = &pronghorn_pata_data,
++	.num_resources		= ARRAY_SIZE(pronghorn_pata_resources),
++	.resource		= pronghorn_pata_resources,
++};
++
++static struct eth_plat_info pronghorn_plat_eth[] = {
++	{
++		.phy		= 0,
++		.rxq		= 3,
++		.txreadyq	= 20,
++	}, {
++		.phy		= 1,
++		.rxq		= 4,
++		.txreadyq	= 21,
++	}
++};
++
++static struct platform_device pronghorn_eth[] = {
++	{
++		.name			= "ixp4xx_eth",
++		.id			= IXP4XX_ETH_NPEB,
++		.dev.platform_data	= pronghorn_plat_eth,
++		.dev.coherent_dma_mask	= DMA_BIT_MASK(32),
++	}, {
++		.name			= "ixp4xx_eth",
++		.id			= IXP4XX_ETH_NPEC,
++		.dev.platform_data	= pronghorn_plat_eth + 1,
++		.dev.coherent_dma_mask	= DMA_BIT_MASK(32),
++	}
++};
++
++static struct platform_device *pronghorn_devices[] __initdata = {
++	&pronghorn_flash,
++	&pronghorn_uart,
++	&pronghorn_led,
++	&pronghorn_eth[0],
++	&pronghorn_eth[1],
++};
++
++static void __init pronghorn_init(void)
++{
++	ixp4xx_sys_init();
++
++	pronghorn_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
++	pronghorn_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + SZ_32M - 1;
++
++	*IXP4XX_EXP_CS0 |= IXP4XX_FLASH_WRITABLE;
++	*IXP4XX_EXP_CS1 = *IXP4XX_EXP_CS0;
++
++	platform_add_devices(pronghorn_devices, ARRAY_SIZE(pronghorn_devices));
++
++	if (machine_is_pronghorn()) {
++		pronghorn_pata_resources[0].start = IXP4XX_EXP_BUS_BASE(2);
++		pronghorn_pata_resources[0].end = IXP4XX_EXP_BUS_END(2);
++
++		pronghorn_pata_resources[1].start = IXP4XX_EXP_BUS_BASE(3);
++		pronghorn_pata_resources[1].end = IXP4XX_EXP_BUS_END(3);
++
++		pronghorn_pata_data.cs0_cfg = IXP4XX_EXP_CS2;
++		pronghorn_pata_data.cs1_cfg = IXP4XX_EXP_CS3;
++	} else {
++		pronghorn_pata_resources[0].start = IXP4XX_EXP_BUS_BASE(3);
++		pronghorn_pata_resources[0].end = IXP4XX_EXP_BUS_END(3);
++
++		pronghorn_pata_resources[1].start = IXP4XX_EXP_BUS_BASE(4);
++		pronghorn_pata_resources[1].end = IXP4XX_EXP_BUS_END(4);
++
++		pronghorn_pata_data.cs0_cfg = IXP4XX_EXP_CS3;
++		pronghorn_pata_data.cs1_cfg = IXP4XX_EXP_CS4;
++
++		platform_device_register(&pronghorn_i2c_gpio);
++	}
++
++	platform_device_register(&pronghorn_pata);
++}
++
++MACHINE_START(PRONGHORN, "ADI Engineering Pronghorn")
++	/* Maintainer: Imre Kaloz <kaloz@openwrt.org> */
++	.map_io		= ixp4xx_map_io,
++	.init_irq	= ixp4xx_init_irq,
++	.init_time	= ixp4xx_timer_init,
++	.atag_offset	= 0x0100,
++	.init_machine	= pronghorn_init,
++#if defined(CONFIG_PCI)
++	.dma_zone_size	= SZ_64M,
++#endif
++	.restart	= ixp4xx_restart,
++MACHINE_END
++
++MACHINE_START(PRONGHORNMETRO, "ADI Engineering Pronghorn Metro")
++	/* Maintainer: Imre Kaloz <kaloz@openwrt.org> */
++	.map_io		= ixp4xx_map_io,
++	.init_irq	= ixp4xx_init_irq,
++	.init_time	= ixp4xx_timer_init,
++	.atag_offset	= 0x0100,
++	.init_machine	= pronghorn_init,
++#if defined(CONFIG_PCI)
++	.dma_zone_size	= SZ_64M,
++#endif
++	.restart	= ixp4xx_restart,
++MACHINE_END
diff --git a/target/linux/ixp4xx/patches-3.18/111-pronghorn_swap_uarts.patch b/target/linux/ixp4xx/patches-3.18/111-pronghorn_swap_uarts.patch
new file mode 100644
index 0000000..ed9f7a7
--- /dev/null
+++ b/target/linux/ixp4xx/patches-3.18/111-pronghorn_swap_uarts.patch
@@ -0,0 +1,44 @@
+--- a/arch/arm/mach-ixp4xx/pronghorn-setup.c
++++ b/arch/arm/mach-ixp4xx/pronghorn-setup.c
+@@ -52,31 +52,31 @@ static struct platform_device pronghorn_
+ 
+ static struct resource pronghorn_uart_resources [] = {
+ 	{
+-		.start		= IXP4XX_UART1_BASE_PHYS,
+-		.end		= IXP4XX_UART1_BASE_PHYS + 0x0fff,
++		.start		= IXP4XX_UART2_BASE_PHYS,
++		.end		= IXP4XX_UART2_BASE_PHYS + 0x0fff,
+ 		.flags		= IORESOURCE_MEM
+ 	},
+ 	{
+-		.start		= IXP4XX_UART2_BASE_PHYS,
+-		.end		= IXP4XX_UART2_BASE_PHYS + 0x0fff,
++		.start		= IXP4XX_UART1_BASE_PHYS,
++		.end		= IXP4XX_UART1_BASE_PHYS + 0x0fff,
+ 		.flags		= IORESOURCE_MEM
+ 	}
+ };
+ 
+ static struct plat_serial8250_port pronghorn_uart_data[] = {
+ 	{
+-		.mapbase	= IXP4XX_UART1_BASE_PHYS,
+-		.membase	= (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET,
+-		.irq		= IRQ_IXP4XX_UART1,
++		.mapbase	= IXP4XX_UART2_BASE_PHYS,
++		.membase	= (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
++		.irq		= IRQ_IXP4XX_UART2,
+ 		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
+ 		.iotype		= UPIO_MEM,
+ 		.regshift	= 2,
+ 		.uartclk	= IXP4XX_UART_XTAL,
+ 	},
+ 	{
+-		.mapbase	= IXP4XX_UART2_BASE_PHYS,
+-		.membase	= (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
+-		.irq		= IRQ_IXP4XX_UART2,
++		.mapbase	= IXP4XX_UART1_BASE_PHYS,
++		.membase	= (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET,
++		.irq		= IRQ_IXP4XX_UART1,
+ 		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
+ 		.iotype		= UPIO_MEM,
+ 		.regshift	= 2,
diff --git a/target/linux/ixp4xx/patches-3.18/115-sidewinder_support.patch b/target/linux/ixp4xx/patches-3.18/115-sidewinder_support.patch
new file mode 100644
index 0000000..20adbb5
--- /dev/null
+++ b/target/linux/ixp4xx/patches-3.18/115-sidewinder_support.patch
@@ -0,0 +1,286 @@
+From 95dac4a842a3c66f69f949b48f9075e16275f77b Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jogo@openwrt.org>
+Date: Sun, 30 Jun 2013 15:48:47 +0200
+Subject: [PATCH 07/36] 115-sidewinder_support.patch
+
+---
+ arch/arm/mach-ixp4xx/Kconfig            |   10 +-
+ arch/arm/mach-ixp4xx/Makefile           |    2 +
+ arch/arm/mach-ixp4xx/sidewinder-pci.c   |   68 ++++++++++++++
+ arch/arm/mach-ixp4xx/sidewinder-setup.c |  151 +++++++++++++++++++++++++++++++
+ 4 files changed, 230 insertions(+), 1 deletion(-)
+ create mode 100644 arch/arm/mach-ixp4xx/sidewinder-pci.c
+ create mode 100644 arch/arm/mach-ixp4xx/sidewinder-setup.c
+
+--- a/arch/arm/mach-ixp4xx/Kconfig
++++ b/arch/arm/mach-ixp4xx/Kconfig
+@@ -77,6 +77,14 @@ config MACH_PRONGHORN
+ config MACH_PRONGHORNMETRO
+ 	def_bool MACH_PRONGHORN
+ 
++config MACH_SIDEWINDER
++	bool "ADI Sidewinder"
++	select PCI
++	help
++	  Say 'Y' here if you want your kernel to support the ADI 
++	  Engineering Sidewinder board. For more information on this
++	  platform, see http://www.adiengineering.com
++
+ config ARCH_IXDP425
+ 	bool "IXDP425"
+ 	help
+@@ -173,7 +181,7 @@ config MACH_ARCOM_VULCAN
+ #
+ config CPU_IXP46X
+ 	bool
+-	depends on MACH_IXDP465
++	depends on MACH_IXDP465 || MACH_SIDEWINDER
+ 	default y
+ 
+ config CPU_IXP43X
+--- a/arch/arm/mach-ixp4xx/Makefile
++++ b/arch/arm/mach-ixp4xx/Makefile
+@@ -20,6 +20,7 @@ obj-pci-$(CONFIG_MACH_WG302V2)		+= wg302
+ obj-pci-$(CONFIG_MACH_FSG)		+= fsg-pci.o
+ obj-pci-$(CONFIG_MACH_ARCOM_VULCAN)	+= vulcan-pci.o
+ obj-pci-$(CONFIG_MACH_PRONGHORN)	+= pronghorn-pci.o
++obj-pci-$(CONFIG_MACH_SIDEWINDER)	+= sidewinder-pci.o
+ 
+ obj-y	+= common.o
+ 
+@@ -41,6 +42,7 @@ obj-$(CONFIG_MACH_FSG)		+= fsg-setup.o
+ obj-$(CONFIG_MACH_GORAMO_MLR)	+= goramo_mlr.o
+ obj-$(CONFIG_MACH_ARCOM_VULCAN)	+= vulcan-setup.o
+ obj-$(CONFIG_MACH_PRONGHORN)	+= pronghorn-setup.o
++obj-$(CONFIG_MACH_SIDEWINDER)	+= sidewinder-setup.o
+ 
+ obj-$(CONFIG_PCI)		+= $(obj-pci-$(CONFIG_PCI)) common-pci.o
+ obj-$(CONFIG_IXP4XX_QMGR)	+= ixp4xx_qmgr.o
+--- /dev/null
++++ b/arch/arm/mach-ixp4xx/sidewinder-pci.c
+@@ -0,0 +1,67 @@
++/*
++ * arch/arch/mach-ixp4xx/pronghornmetro-pci.c
++ *
++ * PCI setup routines for ADI Engineering Sidewinder
++ *
++ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
++ *
++ * based on coyote-pci.c:
++ *	Copyright (C) 2002 Jungo Software Technologies.
++ *	Copyright (C) 2003 MontaVista Softwrae, Inc.
++ *
++ * Maintainer: Imre Kaloz <kaloz@openwrt.org>
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ *
++ */
++
++#include <linux/kernel.h>
++#include <linux/pci.h>
++#include <linux/init.h>
++#include <linux/irq.h>
++
++#include <asm/mach-types.h>
++#include <mach/hardware.h>
++#include <asm/irq.h>
++
++#include <asm/mach/pci.h>
++
++void __init sidewinder_pci_preinit(void)
++{
++	irq_set_irq_type(IRQ_IXP4XX_GPIO11, IRQ_TYPE_LEVEL_LOW);
++	irq_set_irq_type(IRQ_IXP4XX_GPIO10, IRQ_TYPE_LEVEL_LOW);
++	irq_set_irq_type(IRQ_IXP4XX_GPIO9, IRQ_TYPE_LEVEL_LOW);
++
++	ixp4xx_pci_preinit();
++}
++
++static int __init sidewinder_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
++{
++	if (slot == 1)
++		return IRQ_IXP4XX_GPIO11;
++	else if (slot == 2)
++		return IRQ_IXP4XX_GPIO10;
++	else if (slot == 3)
++		return IRQ_IXP4XX_GPIO9;
++	else
++		return -1;
++}
++
++struct hw_pci sidewinder_pci __initdata = {
++	.nr_controllers	= 1,
++	.preinit	= sidewinder_pci_preinit,
++	.ops		= &ixp4xx_ops,
++	.setup		= ixp4xx_setup,
++	.map_irq	= sidewinder_map_irq,
++};
++
++int __init sidewinder_pci_init(void)
++{
++	if (machine_is_sidewinder())
++		pci_common_init(&sidewinder_pci);
++	return 0;
++}
++
++subsys_initcall(sidewinder_pci_init);
+--- /dev/null
++++ b/arch/arm/mach-ixp4xx/sidewinder-setup.c
+@@ -0,0 +1,155 @@
++/*
++ * arch/arm/mach-ixp4xx/sidewinder-setup.c
++ *
++ * Board setup for the ADI Engineering Sidewinder
++ *
++ * Copyright (C) 2008 Imre Kaloz <Kaloz@openwrt.org>
++ *
++ * based on coyote-setup.c:
++ *      Copyright (C) 2003-2005 MontaVista Software, Inc.
++ *
++ * Author: Imre Kaloz <Kaloz@openwrt.org>
++ */
++
++#include <linux/kernel.h>
++#include <linux/serial.h>
++#include <linux/serial_8250.h>
++#include <linux/dma-mapping.h>
++
++#include <asm/mach-types.h>
++#include <asm/mach/arch.h>
++#include <asm/mach/flash.h>
++
++static struct flash_platform_data sidewinder_flash_data = {
++	.map_name	= "cfi_probe",
++	.width		= 2,
++};
++
++static struct resource sidewinder_flash_resource = {
++	.flags		= IORESOURCE_MEM,
++};
++
++static struct platform_device sidewinder_flash = {
++	.name		= "IXP4XX-Flash",
++	.id		= 0,
++	.dev		= {
++		.platform_data = &sidewinder_flash_data,
++	},
++	.num_resources	= 1,
++	.resource	= &sidewinder_flash_resource,
++};
++
++static struct resource sidewinder_uart_resources[] = {
++	{
++		.start	= IXP4XX_UART1_BASE_PHYS,
++		.end	= IXP4XX_UART1_BASE_PHYS + 0x0fff,
++		.flags	= IORESOURCE_MEM,
++	},
++	{
++		.start	= IXP4XX_UART2_BASE_PHYS,
++		.end	= IXP4XX_UART2_BASE_PHYS + 0x0fff,
++		.flags	= IORESOURCE_MEM,
++	}
++};
++
++static struct plat_serial8250_port sidewinder_uart_data[] = {
++	{
++		.mapbase	= IXP4XX_UART1_BASE_PHYS,
++		.membase	= (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET,
++		.irq		= IRQ_IXP4XX_UART1,
++		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
++		.iotype		= UPIO_MEM,
++		.regshift	= 2,
++		.uartclk	= IXP4XX_UART_XTAL,
++	},
++	{
++		.mapbase	= IXP4XX_UART2_BASE_PHYS,
++		.membase	= (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
++		.irq		= IRQ_IXP4XX_UART2,
++		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
++		.iotype		= UPIO_MEM,
++		.regshift	= 2,
++		.uartclk	= IXP4XX_UART_XTAL,
++	},
++	{ },
++};
++
++static struct platform_device sidewinder_uart = {
++	.name		= "serial8250",
++	.id		= PLAT8250_DEV_PLATFORM,
++	.dev		= {
++		.platform_data	= sidewinder_uart_data,
++	},
++	.num_resources	= ARRAY_SIZE(sidewinder_uart_resources),
++	.resource	= sidewinder_uart_resources,
++};
++
++static struct eth_plat_info sidewinder_plat_eth[] = {
++	{
++		.phy		= 5,
++		.rxq		= 3,
++		.txreadyq	= 20,
++	}, {
++		.phy		= IXP4XX_ETH_PHY_MAX_ADDR,
++		.phy_mask	= 0x1e,
++		.rxq		= 4,
++		.txreadyq	= 21,
++	}, {
++		.phy		= 31,
++		.rxq		= 2,
++		.txreadyq	= 19,
++	}
++};
++
++static struct platform_device sidewinder_eth[] = {
++	{
++		.name			= "ixp4xx_eth",
++		.id			= IXP4XX_ETH_NPEB,
++		.dev.platform_data	= sidewinder_plat_eth,
++		.dev.coherent_dma_mask	= DMA_BIT_MASK(32),
++	}, {
++		.name			= "ixp4xx_eth",
++		.id			= IXP4XX_ETH_NPEC,
++		.dev.platform_data	= sidewinder_plat_eth + 1,
++		.dev.coherent_dma_mask	= DMA_BIT_MASK(32),
++	}, {
++		.name			= "ixp4xx_eth",
++		.id			= IXP4XX_ETH_NPEA,
++		.dev.platform_data	= sidewinder_plat_eth + 2,
++		.dev.coherent_dma_mask	= DMA_BIT_MASK(32),
++	}
++};
++
++static struct platform_device *sidewinder_devices[] __initdata = {
++	&sidewinder_flash,
++	&sidewinder_uart,
++	&sidewinder_eth[0],
++	&sidewinder_eth[1],
++	&sidewinder_eth[2],
++};
++
++static void __init sidewinder_init(void)
++{
++	ixp4xx_sys_init();
++
++	sidewinder_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
++	sidewinder_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + SZ_64M - 1;
++
++	*IXP4XX_EXP_CS0 |= IXP4XX_FLASH_WRITABLE;
++	*IXP4XX_EXP_CS1 = *IXP4XX_EXP_CS0;
++
++	platform_add_devices(sidewinder_devices, ARRAY_SIZE(sidewinder_devices));
++}
++
++MACHINE_START(SIDEWINDER, "ADI Engineering Sidewinder")
++	/* Maintainer: Imre Kaloz <kaloz@openwrt.org> */
++	.map_io		= ixp4xx_map_io,
++	.init_irq	= ixp4xx_init_irq,
++	.init_time	= ixp4xx_timer_init,
++	.atag_offset	= 0x0100,
++	.init_machine	= sidewinder_init,
++#if defined(CONFIG_PCI)
++	.dma_zone_size	= SZ_64M,
++#endif
++	.restart	= ixp4xx_restart,
++MACHINE_END
diff --git a/target/linux/ixp4xx/patches-3.18/116-sidewinder_fis_location.patch b/target/linux/ixp4xx/patches-3.18/116-sidewinder_fis_location.patch
new file mode 100644
index 0000000..7d633f7
--- /dev/null
+++ b/target/linux/ixp4xx/patches-3.18/116-sidewinder_fis_location.patch
@@ -0,0 +1,30 @@
+--- a/drivers/mtd/redboot.c
++++ b/drivers/mtd/redboot.c
+@@ -30,6 +30,8 @@
+ #include <linux/mtd/partitions.h>
+ #include <linux/module.h>
+ 
++#include <asm/mach-types.h>
++
+ struct fis_image_desc {
+     unsigned char name[16];      // Null terminated name
+     uint32_t	  flash_base;    // Address within FLASH of image
+@@ -47,7 +49,8 @@ struct fis_list {
+ 	struct fis_list *next;
+ };
+ 
+-static int directory = CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK;
++int directory = CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK;
++
+ module_param(directory, int, 0);
+ 
+ static inline int redboot_checksum(struct fis_image_desc *img)
+@@ -75,6 +78,8 @@ static int parse_redboot_partitions(stru
+ #ifdef CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED
+ 	static char nullstring[] = "unallocated";
+ #endif
++	if (machine_is_sidewinder())
++		directory = -5;
+ 
+ 	if ( directory < 0 ) {
+ 		offset = master->size + directory * master->erasesize;
diff --git a/target/linux/ixp4xx/patches-3.18/120-compex_support.patch b/target/linux/ixp4xx/patches-3.18/120-compex_support.patch
new file mode 100644
index 0000000..2abc159
--- /dev/null
+++ b/target/linux/ixp4xx/patches-3.18/120-compex_support.patch
@@ -0,0 +1,199 @@
+From 24025a2dcf1248079dd3019fac6ed955252d277f Mon Sep 17 00:00:00 2001
+From: Imre Kaloz <kaloz@openwrt.org>
+Date: Mon, 14 Jul 2008 21:56:34 +0200
+Subject: [PATCH] Add support for the Compex WP18 / NP18A boards
+
+Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
+---
+
+--- a/arch/arm/mach-ixp4xx/Kconfig
++++ b/arch/arm/mach-ixp4xx/Kconfig
+@@ -85,6 +85,14 @@ config MACH_SIDEWINDER
+ 	  Engineering Sidewinder board. For more information on this
+ 	  platform, see http://www.adiengineering.com
+ 
++config MACH_COMPEXWP18
++	bool "Compex WP18 / NP18A"
++	select PCI
++	help
++	  Say 'Y' here if you want your kernel to support Compex' 
++	  WP18 or NP18A boards. For more information on this
++	  platform, see http://www.compex.com.sg/home/OEM/product_ap.htm
++
+ config ARCH_IXDP425
+ 	bool "IXDP425"
+ 	help
+--- a/arch/arm/mach-ixp4xx/Makefile
++++ b/arch/arm/mach-ixp4xx/Makefile
+@@ -21,6 +21,7 @@ obj-pci-$(CONFIG_MACH_FSG)		+= fsg-pci.o
+ obj-pci-$(CONFIG_MACH_ARCOM_VULCAN)	+= vulcan-pci.o
+ obj-pci-$(CONFIG_MACH_PRONGHORN)	+= pronghorn-pci.o
+ obj-pci-$(CONFIG_MACH_SIDEWINDER)	+= sidewinder-pci.o
++obj-pci-$(CONFIG_MACH_COMPEXWP18)	+= ixdp425-pci.o
+ 
+ obj-y	+= common.o
+ 
+@@ -43,6 +44,7 @@ obj-$(CONFIG_MACH_GORAMO_MLR)	+= goramo_
+ obj-$(CONFIG_MACH_ARCOM_VULCAN)	+= vulcan-setup.o
+ obj-$(CONFIG_MACH_PRONGHORN)	+= pronghorn-setup.o
+ obj-$(CONFIG_MACH_SIDEWINDER)	+= sidewinder-setup.o
++obj-$(CONFIG_MACH_COMPEXWP18)	+= compex42x-setup.o
+ 
+ obj-$(CONFIG_PCI)		+= $(obj-pci-$(CONFIG_PCI)) common-pci.o
+ obj-$(CONFIG_IXP4XX_QMGR)	+= ixp4xx_qmgr.o
+--- /dev/null
++++ b/arch/arm/mach-ixp4xx/compex42x-setup.c
+@@ -0,0 +1,141 @@
++/*
++ * arch/arm/mach-ixp4xx/compex-setup.c
++ *
++ * Compex WP18 / NP18A board-setup
++ *
++ * Copyright (C) 2008 Imre Kaloz <Kaloz@openwrt.org>
++ *
++ * based on coyote-setup.c:
++ *	Copyright (C) 2003-2005 MontaVista Software, Inc.
++ *
++ * Author: Imre Kaloz <Kaloz@openwrt.org>
++ */
++
++#include <linux/kernel.h>
++#include <linux/serial.h>
++#include <linux/serial_8250.h>
++#include <linux/dma-mapping.h>
++
++#include <asm/mach-types.h>
++#include <asm/mach/arch.h>
++#include <asm/mach/flash.h>
++
++static struct flash_platform_data compex42x_flash_data = {
++	.map_name	= "cfi_probe",
++	.width		= 2,
++};
++
++static struct resource compex42x_flash_resource = {
++	.flags		= IORESOURCE_MEM,
++};
++
++static struct platform_device compex42x_flash = {
++	.name		= "IXP4XX-Flash",
++	.id		= 0,
++	.dev		= {
++		.platform_data = &compex42x_flash_data,
++	},
++	.num_resources	= 1,
++	.resource	= &compex42x_flash_resource,
++};
++
++static struct resource compex42x_uart_resources[] = {
++	{
++		.start		= IXP4XX_UART1_BASE_PHYS,
++		.end		= IXP4XX_UART1_BASE_PHYS + 0x0fff,
++		.flags		= IORESOURCE_MEM
++	},
++	{
++		.start		= IXP4XX_UART2_BASE_PHYS,
++		.end		= IXP4XX_UART2_BASE_PHYS + 0x0fff,
++		.flags		= IORESOURCE_MEM
++	}
++};
++
++static struct plat_serial8250_port compex42x_uart_data[] = {
++	{
++		.mapbase	= IXP4XX_UART1_BASE_PHYS,
++		.membase	= (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET,
++		.irq		= IRQ_IXP4XX_UART1,
++		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
++		.iotype		= UPIO_MEM,
++		.regshift	= 2,
++		.uartclk	= IXP4XX_UART_XTAL,
++	},
++	{
++		.mapbase	= IXP4XX_UART2_BASE_PHYS,
++		.membase	= (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
++		.irq		= IRQ_IXP4XX_UART2,
++		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
++		.iotype		= UPIO_MEM,
++		.regshift	= 2,
++		.uartclk	= IXP4XX_UART_XTAL,
++	},
++	{ },
++};
++
++static struct platform_device compex42x_uart = {
++	.name			= "serial8250",
++	.id			= PLAT8250_DEV_PLATFORM,
++	.dev.platform_data	= compex42x_uart_data,
++	.num_resources		= 2,
++	.resource		= compex42x_uart_resources,
++};
++
++static struct eth_plat_info compex42x_plat_eth[] = {
++	{
++		.phy		= IXP4XX_ETH_PHY_MAX_ADDR,
++		.phy_mask	= 0xf0000,
++		.rxq		= 3,
++		.txreadyq	= 20,
++	}, {
++		.phy		= 3,
++		.rxq		= 4,
++		.txreadyq	= 21,
++	}
++};
++
++static struct platform_device compex42x_eth[] = {
++	{
++		.name			= "ixp4xx_eth",
++		.id			= IXP4XX_ETH_NPEB,
++		.dev.platform_data	= compex42x_plat_eth,
++		.dev.coherent_dma_mask	= DMA_BIT_MASK(32),
++	}, {
++		.name			= "ixp4xx_eth",
++		.id			= IXP4XX_ETH_NPEC,
++		.dev.platform_data	= compex42x_plat_eth + 1,
++		.dev.coherent_dma_mask	= DMA_BIT_MASK(32),
++	}
++};
++
++static struct platform_device *compex42x_devices[] __initdata = {
++	&compex42x_flash,
++	&compex42x_uart,
++	&compex42x_eth[0],
++	&compex42x_eth[1],
++};
++
++static void __init compex42x_init(void)
++{
++	ixp4xx_sys_init();
++
++	compex42x_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
++	compex42x_flash_resource.end =
++		IXP4XX_EXP_BUS_BASE(0) + SZ_32M - 1;
++
++	platform_add_devices(compex42x_devices, ARRAY_SIZE(compex42x_devices));
++}
++
++MACHINE_START(COMPEXWP18, "Compex WP18 / NP18A")
++	/* Maintainer: Imre Kaloz <Kaloz@openwrt.org> */
++	.map_io		= ixp4xx_map_io,
++	.init_irq	= ixp4xx_init_irq,
++	.init_time	= ixp4xx_timer_init,
++	.atag_offset	= 0x0100,
++	.init_machine	= compex42x_init,
++#if defined(CONFIG_PCI)
++	.dma_zone_size	= SZ_64M,
++#endif
++	.restart	= ixp4xx_restart,
++MACHINE_END
+--- a/arch/arm/mach-ixp4xx/ixdp425-pci.c
++++ b/arch/arm/mach-ixp4xx/ixdp425-pci.c
+@@ -69,7 +69,8 @@ struct hw_pci ixdp425_pci __initdata = {
+ int __init ixdp425_pci_init(void)
+ {
+ 	if (machine_is_ixdp425() || machine_is_ixcdp1100() ||
+-			machine_is_ixdp465() || machine_is_kixrp435())
++			machine_is_ixdp465() || machine_is_kixrp435() ||
++			machine_is_compex42x())
+ 		pci_common_init(&ixdp425_pci);
+ 	return 0;
+ }
diff --git a/target/linux/ixp4xx/patches-3.18/130-wrt300nv2_support.patch b/target/linux/ixp4xx/patches-3.18/130-wrt300nv2_support.patch
new file mode 100644
index 0000000..49359be
--- /dev/null
+++ b/target/linux/ixp4xx/patches-3.18/130-wrt300nv2_support.patch
@@ -0,0 +1,227 @@
+--- a/arch/arm/mach-ixp4xx/Kconfig
++++ b/arch/arm/mach-ixp4xx/Kconfig
+@@ -93,6 +93,14 @@ config MACH_COMPEXWP18
+ 	  WP18 or NP18A boards. For more information on this
+ 	  platform, see http://www.compex.com.sg/home/OEM/product_ap.htm
+ 
++config MACH_WRT300NV2
++	bool "Linksys WRT300N v2"
++	select PCI
++	help
++	  Say 'Y' here if you want your kernel to support Linksys'
++	  WRT300N v2 router. For more information on this
++	  platform, see http://openwrt.org
++
+ config ARCH_IXDP425
+ 	bool "IXDP425"
+ 	help
+--- a/arch/arm/mach-ixp4xx/Makefile
++++ b/arch/arm/mach-ixp4xx/Makefile
+@@ -22,6 +22,7 @@ obj-pci-$(CONFIG_MACH_ARCOM_VULCAN)	+= v
+ obj-pci-$(CONFIG_MACH_PRONGHORN)	+= pronghorn-pci.o
+ obj-pci-$(CONFIG_MACH_SIDEWINDER)	+= sidewinder-pci.o
+ obj-pci-$(CONFIG_MACH_COMPEXWP18)	+= ixdp425-pci.o
++obj-pci-$(CONFIG_MACH_WRT300NV2)		+= wrt300nv2-pci.o
+ 
+ obj-y	+= common.o
+ 
+@@ -45,6 +46,7 @@ obj-$(CONFIG_MACH_ARCOM_VULCAN)	+= vulca
+ obj-$(CONFIG_MACH_PRONGHORN)	+= pronghorn-setup.o
+ obj-$(CONFIG_MACH_SIDEWINDER)	+= sidewinder-setup.o
+ obj-$(CONFIG_MACH_COMPEXWP18)	+= compex42x-setup.o
++obj-$(CONFIG_MACH_WRT300NV2)	+= wrt300nv2-setup.o
+ 
+ obj-$(CONFIG_PCI)		+= $(obj-pci-$(CONFIG_PCI)) common-pci.o
+ obj-$(CONFIG_IXP4XX_QMGR)	+= ixp4xx_qmgr.o
+--- a/arch/arm/mach-ixp4xx/include/mach/uncompress.h
++++ b/arch/arm/mach-ixp4xx/include/mach/uncompress.h
+@@ -43,7 +43,8 @@ static __inline__ void __arch_decomp_set
+ 	if (machine_is_adi_coyote() || machine_is_gtwx5715() ||
+ 	    machine_is_gateway7001() || machine_is_wg302v2() ||
+ 	    machine_is_devixp() || machine_is_miccpt() || machine_is_mic256() ||
+-	    machine_is_pronghorn() || machine_is_pronghorn_metro())
++	    machine_is_pronghorn() || machine_is_pronghorn_metro() ||
++	    machine_is_wrt300nv2())
+ 		uart_base = (volatile u32*) IXP4XX_UART2_BASE_PHYS;
+ 	else
+ 		uart_base = (volatile u32*) IXP4XX_UART1_BASE_PHYS;
+--- /dev/null
++++ b/arch/arm/mach-ixp4xx/wrt300nv2-pci.c
+@@ -0,0 +1,64 @@
++/*
++ * arch/arch/mach-ixp4xx/wrt300nv2-pci.c
++ *
++ * PCI setup routines for Linksys WRT300N v2
++ *
++ * Copyright (C) 2007 Imre Kaloz <kaloz@openwrt.org>
++ *
++ * based on coyote-pci.c:
++ *	Copyright (C) 2002 Jungo Software Technologies.
++ *	Copyright (C) 2003 MontaVista Softwrae, Inc.
++ *
++ * Maintainer: Imre Kaloz <kaloz@openwrt.org>
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ *
++ */
++
++#include <linux/kernel.h>
++#include <linux/pci.h>
++#include <linux/init.h>
++#include <linux/irq.h>
++
++#include <asm/mach-types.h>
++#include <mach/hardware.h>
++#include <asm/irq.h>
++
++#include <asm/mach/pci.h>
++
++extern void ixp4xx_pci_preinit(void);
++extern int ixp4xx_setup(int nr, struct pci_sys_data *sys);
++extern struct pci_bus *ixp4xx_scan_bus(int nr, struct pci_sys_data *sys);
++
++void __init wrt300nv2_pci_preinit(void)
++{
++	irq_set_irq_type(IRQ_IXP4XX_GPIO8, IRQ_TYPE_LEVEL_LOW);
++
++	ixp4xx_pci_preinit();
++}
++
++static int __init wrt300nv2_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
++{
++	if (slot == 1)
++		return IRQ_IXP4XX_GPIO8;
++	else return -1;
++}
++
++struct hw_pci wrt300nv2_pci __initdata = {
++	.nr_controllers = 1,
++	.preinit	= wrt300nv2_pci_preinit,
++	.ops		= &ixp4xx_ops,
++	.setup		= ixp4xx_setup,
++	.map_irq	= wrt300nv2_map_irq,
++};
++
++int __init wrt300nv2_pci_init(void)
++{
++	if (machine_is_wrt300nv2())
++		pci_common_init(&wrt300nv2_pci);
++	return 0;
++}
++
++subsys_initcall(wrt300nv2_pci_init);
+--- /dev/null
++++ b/arch/arm/mach-ixp4xx/wrt300nv2-setup.c
+@@ -0,0 +1,110 @@
++/*
++ * arch/arm/mach-ixp4xx/wrt300nv2-setup.c
++ *
++ * Board setup for the Linksys WRT300N v2
++ *
++ * Copyright (C) 2007 Imre Kaloz <Kaloz@openwrt.org>
++ *
++ * based on coyote-setup.c:
++ *      Copyright (C) 2003-2005 MontaVista Software, Inc.
++ *
++ * Author: Imre Kaloz <Kaloz@openwrt.org>
++ */
++
++#include <linux/kernel.h>
++#include <linux/init.h>
++#include <linux/device.h>
++#include <linux/serial.h>
++#include <linux/tty.h>
++#include <linux/serial_8250.h>
++#include <linux/slab.h>
++
++#include <asm/types.h>
++#include <asm/setup.h>
++#include <asm/memory.h>
++#include <mach/hardware.h>
++#include <asm/irq.h>
++#include <asm/mach-types.h>
++#include <asm/mach/arch.h>
++#include <asm/mach/flash.h>
++
++static struct flash_platform_data wrt300nv2_flash_data = {
++	.map_name	= "cfi_probe",
++	.width		= 2,
++};
++
++static struct resource wrt300nv2_flash_resource = {
++	.flags		= IORESOURCE_MEM,
++};
++
++static struct platform_device wrt300nv2_flash = {
++	.name		= "IXP4XX-Flash",
++	.id		= 0,
++	.dev		= {
++		.platform_data = &wrt300nv2_flash_data,
++	},
++	.num_resources	= 1,
++	.resource	= &wrt300nv2_flash_resource,
++};
++
++static struct resource wrt300nv2_uart_resource = {
++	.start	= IXP4XX_UART2_BASE_PHYS,
++	.end	= IXP4XX_UART2_BASE_PHYS + 0x0fff,
++	.flags	= IORESOURCE_MEM,
++};
++
++static struct plat_serial8250_port wrt300nv2_uart_data[] = {
++	{
++		.mapbase	= IXP4XX_UART2_BASE_PHYS,
++		.membase	= (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
++		.irq		= IRQ_IXP4XX_UART2,
++		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
++		.iotype		= UPIO_MEM,
++		.regshift	= 2,
++		.uartclk	= IXP4XX_UART_XTAL,
++	},
++	{ },
++};
++
++static struct platform_device wrt300nv2_uart = {
++	.name		= "serial8250",
++	.id		= PLAT8250_DEV_PLATFORM,
++	.dev			= {
++		.platform_data	= wrt300nv2_uart_data,
++	},
++	.num_resources	= 1,
++	.resource	= &wrt300nv2_uart_resource,
++};
++
++static struct platform_device *wrt300nv2_devices[] __initdata = {
++	&wrt300nv2_flash,
++	&wrt300nv2_uart
++};
++
++static void __init wrt300nv2_init(void)
++{
++	ixp4xx_sys_init();
++
++	wrt300nv2_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
++	wrt300nv2_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + SZ_32M - 1;
++
++	*IXP4XX_EXP_CS0 |= IXP4XX_FLASH_WRITABLE;
++	*IXP4XX_EXP_CS1 = *IXP4XX_EXP_CS0;
++
++	platform_add_devices(wrt300nv2_devices, ARRAY_SIZE(wrt300nv2_devices));
++}
++
++#ifdef CONFIG_MACH_WRT300NV2
++MACHINE_START(WRT300NV2, "Linksys WRT300N v2")
++	/* Maintainer: Imre Kaloz <kaloz@openwrt.org> */
++	.map_io		= ixp4xx_map_io,
++	.init_irq	= ixp4xx_init_irq,
++	.init_time	= ixp4xx_timer_init,
++	.atag_offset	= 0x0100,
++	.init_machine	= wrt300nv2_init,
++#if defined(CONFIG_PCI)
++	.dma_zone_size	= SZ_64M,
++#endif
++	.restart	= ixp4xx_restart,
++MACHINE_END
++#endif
diff --git a/target/linux/ixp4xx/patches-3.18/131-wrt300nv2_mac_plat_info.patch b/target/linux/ixp4xx/patches-3.18/131-wrt300nv2_mac_plat_info.patch
new file mode 100644
index 0000000..5debbf1
--- /dev/null
+++ b/target/linux/ixp4xx/patches-3.18/131-wrt300nv2_mac_plat_info.patch
@@ -0,0 +1,42 @@
+--- a/arch/arm/mach-ixp4xx/wrt300nv2-setup.c
++++ b/arch/arm/mach-ixp4xx/wrt300nv2-setup.c
+@@ -76,9 +76,38 @@ static struct platform_device wrt300nv2_
+ 	.resource	= &wrt300nv2_uart_resource,
+ };
+ 
++/* Built-in 10/100 Ethernet MAC interfaces */
++static struct eth_plat_info wrt300nv2_plat_eth[] = {
++	{
++		.phy		= -1,
++		.rxq		= 3,
++		.txreadyq	= 20,
++	}, {
++		.phy		= 1,
++		.rxq		= 4,
++		.txreadyq	= 21,
++	}
++};
++
++static struct platform_device wrt300nv2_eth[] = {
++	{
++		.name			= "ixp4xx_eth",
++		.id			= IXP4XX_ETH_NPEB,
++		.dev.platform_data	= wrt300nv2_plat_eth,
++		.dev.coherent_dma_mask	= DMA_BIT_MASK(32),
++	}, {
++		.name			= "ixp4xx_eth",
++		.id			= IXP4XX_ETH_NPEC,
++		.dev.platform_data	= wrt300nv2_plat_eth + 1,
++		.dev.coherent_dma_mask	= DMA_BIT_MASK(32),
++	}
++};
++
+ static struct platform_device *wrt300nv2_devices[] __initdata = {
+ 	&wrt300nv2_flash,
+-	&wrt300nv2_uart
++	&wrt300nv2_uart,
++	&wrt300nv2_eth[0],
++	&wrt300nv2_eth[1],
+ };
+ 
+ static void __init wrt300nv2_init(void)
diff --git a/target/linux/ixp4xx/patches-3.18/132-wrt300nv2_mac_fix.patch b/target/linux/ixp4xx/patches-3.18/132-wrt300nv2_mac_fix.patch
new file mode 100644
index 0000000..99db267
--- /dev/null
+++ b/target/linux/ixp4xx/patches-3.18/132-wrt300nv2_mac_fix.patch
@@ -0,0 +1,72 @@
+--- a/arch/arm/mach-ixp4xx/wrt300nv2-setup.c
++++ b/arch/arm/mach-ixp4xx/wrt300nv2-setup.c
+@@ -3,6 +3,7 @@
+  *
+  * Board setup for the Linksys WRT300N v2
+  *
++ * Copyright (C) 2010 Alexandros C. Couloumbis <alex@ozo.com>
+  * Copyright (C) 2007 Imre Kaloz <Kaloz@openwrt.org>
+  *
+  * based on coyote-setup.c:
+@@ -18,6 +19,7 @@
+ #include <linux/tty.h>
+ #include <linux/serial_8250.h>
+ #include <linux/slab.h>
++#include <linux/etherdevice.h>
+ 
+ #include <asm/types.h>
+ #include <asm/setup.h>
+@@ -79,7 +81,8 @@ static struct platform_device wrt300nv2_
+ /* Built-in 10/100 Ethernet MAC interfaces */
+ static struct eth_plat_info wrt300nv2_plat_eth[] = {
+ 	{
+-		.phy		= -1,
++		.phy		= IXP4XX_ETH_PHY_MAX_ADDR,
++		.phy_mask	= 0x0F0000,
+ 		.rxq		= 3,
+ 		.txreadyq	= 20,
+ 	}, {
+@@ -112,6 +115,10 @@ static struct platform_device *wrt300nv2
+ 
+ static void __init wrt300nv2_init(void)
+ {
++	uint8_t __iomem *f;
++	int offset = 0;
++	int i;
++
+ 	ixp4xx_sys_init();
+ 
+ 	wrt300nv2_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
+@@ -121,6 +128,32 @@ static void __init wrt300nv2_init(void)
+ 	*IXP4XX_EXP_CS1 = *IXP4XX_EXP_CS0;
+ 
+ 	platform_add_devices(wrt300nv2_devices, ARRAY_SIZE(wrt300nv2_devices));
++
++	f = ioremap(IXP4XX_EXP_BUS_BASE(0), 0x60000);
++
++	if (f) {
++		for (i = 0; i < 6; i++) {
++#ifdef __ARMEB__
++			wrt300nv2_plat_eth[0].hwaddr[i] = readb(f + 0x5FFA0 + i);
++			if (i == 5)
++				offset = 1;
++			wrt300nv2_plat_eth[1].hwaddr[i] = (wrt300nv2_plat_eth[0].hwaddr[i] + offset);
++#else
++			wrt300nv2_plat_eth[0].hwaddr[i] = readb(f + 0x5FFA0 + (i^3));
++			if (i == 5)
++				offset = 1;
++			wrt300nv2_plat_eth[1].hwaddr[i] = (wrt300nv2_plat_eth[0].hwaddr[i] + offset);
++#endif
++		}
++		iounmap(f);
++	}
++
++	if (!(is_valid_ether_addr(wrt300nv2_plat_eth[0].hwaddr)))
++		random_ether_addr(wrt300nv2_plat_eth[0].hwaddr);
++	if (!(is_valid_ether_addr(wrt300nv2_plat_eth[1].hwaddr))) {
++		memcpy(wrt300nv2_plat_eth[1].hwaddr, wrt300nv2_plat_eth[0].hwaddr, ETH_ALEN);
++		wrt300nv2_plat_eth[1].hwaddr[5] = (wrt300nv2_plat_eth[0].hwaddr[5] + 1);
++	}
+ }
+ 
+ #ifdef CONFIG_MACH_WRT300NV2
diff --git a/target/linux/ixp4xx/patches-3.18/150-lanready_ap1000_support.patch b/target/linux/ixp4xx/patches-3.18/150-lanready_ap1000_support.patch
new file mode 100644
index 0000000..ad09efd
--- /dev/null
+++ b/target/linux/ixp4xx/patches-3.18/150-lanready_ap1000_support.patch
@@ -0,0 +1,203 @@
+--- a/arch/arm/mach-ixp4xx/Kconfig
++++ b/arch/arm/mach-ixp4xx/Kconfig
+@@ -101,6 +101,14 @@ config MACH_WRT300NV2
+ 	  WRT300N v2 router. For more information on this
+ 	  platform, see http://openwrt.org
+ 
++config MACH_AP1000
++	bool "Lanready AP-1000"
++	select PCI
++	help
++	  Say 'Y' here if you want your kernel to support Lanready's
++	  AP1000 board. For more information on this
++	  platform, see http://openwrt.org
++
+ config ARCH_IXDP425
+ 	bool "IXDP425"
+ 	help
+--- a/arch/arm/mach-ixp4xx/Makefile
++++ b/arch/arm/mach-ixp4xx/Makefile
+@@ -23,6 +23,7 @@ obj-pci-$(CONFIG_MACH_PRONGHORN)	+= pron
+ obj-pci-$(CONFIG_MACH_SIDEWINDER)	+= sidewinder-pci.o
+ obj-pci-$(CONFIG_MACH_COMPEXWP18)	+= ixdp425-pci.o
+ obj-pci-$(CONFIG_MACH_WRT300NV2)		+= wrt300nv2-pci.o
++obj-pci-$(CONFIG_MACH_AP1000)		+= ixdp425-pci.o
+ 
+ obj-y	+= common.o
+ 
+@@ -47,6 +48,7 @@ obj-$(CONFIG_MACH_PRONGHORN)	+= pronghor
+ obj-$(CONFIG_MACH_SIDEWINDER)	+= sidewinder-setup.o
+ obj-$(CONFIG_MACH_COMPEXWP18)	+= compex42x-setup.o
+ obj-$(CONFIG_MACH_WRT300NV2)	+= wrt300nv2-setup.o
++obj-$(CONFIG_MACH_AP1000)	+= ap1000-setup.o
+ 
+ obj-$(CONFIG_PCI)		+= $(obj-pci-$(CONFIG_PCI)) common-pci.o
+ obj-$(CONFIG_IXP4XX_QMGR)	+= ixp4xx_qmgr.o
+--- /dev/null
++++ b/arch/arm/mach-ixp4xx/ap1000-setup.c
+@@ -0,0 +1,154 @@
++/*
++ * arch/arm/mach-ixp4xx/ap1000-setup.c
++ *
++ * Lanready AP-1000
++ *
++ * Copyright (C) 2007 Imre Kaloz <Kaloz@openwrt.org>
++ *
++ * based on ixdp425-setup.c:
++ *	Copyright (C) 2003-2005 MontaVista Software, Inc.
++ *
++ * Author: Imre Kaloz <Kaloz@openwrt.org>
++ */
++
++#include <linux/kernel.h>
++#include <linux/init.h>
++#include <linux/device.h>
++#include <linux/serial.h>
++#include <linux/tty.h>
++#include <linux/serial_8250.h>
++#include <linux/slab.h>
++#include <linux/dma-mapping.h>
++
++#include <asm/types.h>
++#include <asm/setup.h>
++#include <asm/memory.h>
++#include <mach/hardware.h>
++#include <asm/mach-types.h>
++#include <asm/irq.h>
++#include <asm/mach/arch.h>
++#include <asm/mach/flash.h>
++
++static struct flash_platform_data ap1000_flash_data = {
++	.map_name	= "cfi_probe",
++	.width		= 2,
++};
++
++static struct resource ap1000_flash_resource = {
++	.flags		= IORESOURCE_MEM,
++};
++
++static struct platform_device ap1000_flash = {
++	.name		= "IXP4XX-Flash",
++	.id		= 0,
++	.dev		= {
++		.platform_data = &ap1000_flash_data,
++	},
++	.num_resources	= 1,
++	.resource	= &ap1000_flash_resource,
++};
++
++static struct resource ap1000_uart_resources[] = {
++	{
++		.start		= IXP4XX_UART1_BASE_PHYS,
++		.end		= IXP4XX_UART1_BASE_PHYS + 0x0fff,
++		.flags		= IORESOURCE_MEM
++	},
++	{
++		.start		= IXP4XX_UART2_BASE_PHYS,
++		.end		= IXP4XX_UART2_BASE_PHYS + 0x0fff,
++		.flags		= IORESOURCE_MEM
++	}
++};
++
++static struct plat_serial8250_port ap1000_uart_data[] = {
++	{
++		.mapbase	= IXP4XX_UART1_BASE_PHYS,
++		.membase	= (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET,
++		.irq		= IRQ_IXP4XX_UART1,
++		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
++		.iotype		= UPIO_MEM,
++		.regshift	= 2,
++		.uartclk	= IXP4XX_UART_XTAL,
++	},
++	{
++		.mapbase	= IXP4XX_UART2_BASE_PHYS,
++		.membase	= (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
++		.irq		= IRQ_IXP4XX_UART2,
++		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
++		.iotype		= UPIO_MEM,
++		.regshift	= 2,
++		.uartclk	= IXP4XX_UART_XTAL,
++	},
++	{ },
++};
++
++static struct platform_device ap1000_uart = {
++	.name			= "serial8250",
++	.id			= PLAT8250_DEV_PLATFORM,
++	.dev.platform_data	= ap1000_uart_data,
++	.num_resources		= 2,
++	.resource		= ap1000_uart_resources
++};
++
++static struct platform_device *ap1000_devices[] __initdata = {
++	&ap1000_flash,
++	&ap1000_uart
++};
++
++static char ap1000_mem_fixup[] __initdata = "mem=64M ";
++
++static void __init ap1000_fixup(struct machine_desc *desc,
++		struct tag *tags, char **cmdline, struct meminfo *mi)
++
++{
++	struct tag *t = tags;
++	char *p = *cmdline;
++
++	/* Find the end of the tags table, taking note of any cmdline tag. */
++	for (; t->hdr.size; t = tag_next(t)) {
++		if (t->hdr.tag == ATAG_CMDLINE) {
++			p = t->u.cmdline.cmdline;
++		}
++	}
++
++	/* Overwrite the end of the table with a new cmdline tag. */
++	t->hdr.tag = ATAG_CMDLINE;
++	t->hdr.size = (sizeof (struct tag_header) +
++		strlen(ap1000_mem_fixup) + strlen(p) + 1 + 4) >> 2;
++	strlcpy(t->u.cmdline.cmdline, ap1000_mem_fixup, COMMAND_LINE_SIZE);
++	strlcpy(t->u.cmdline.cmdline + strlen(ap1000_mem_fixup), p,
++		COMMAND_LINE_SIZE - strlen(ap1000_mem_fixup));
++
++	/* Terminate the table. */
++	t = tag_next(t);
++	t->hdr.tag = ATAG_NONE;
++	t->hdr.size = 0;
++}
++
++static void __init ap1000_init(void)
++{
++	ixp4xx_sys_init();
++
++	ap1000_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
++	ap1000_flash_resource.end =
++		IXP4XX_EXP_BUS_BASE(0) + ixp4xx_exp_bus_size - 1;
++
++	platform_add_devices(ap1000_devices, ARRAY_SIZE(ap1000_devices));
++}
++
++#ifdef CONFIG_MACH_AP1000
++MACHINE_START(AP1000, "Lanready AP-1000")
++	/* Maintainer: Imre Kaloz <Kaloz@openwrt.org> */
++	.fixup		= ap1000_fixup,
++	.map_io		= ixp4xx_map_io,
++	.init_irq	= ixp4xx_init_irq,
++	.init_time	= ixp4xx_timer_init,
++	.atag_offset	= 0x0100,
++	.init_machine	= ap1000_init,
++#if defined(CONFIG_PCI)
++	.dma_zone_size	= SZ_64M,
++#endif
++	.restart	= ixp4xx_restart,
++MACHINE_END
++#endif
+--- a/arch/arm/mach-ixp4xx/ixdp425-pci.c
++++ b/arch/arm/mach-ixp4xx/ixdp425-pci.c
+@@ -70,7 +70,7 @@ int __init ixdp425_pci_init(void)
+ {
+ 	if (machine_is_ixdp425() || machine_is_ixcdp1100() ||
+ 			machine_is_ixdp465() || machine_is_kixrp435() ||
+-			machine_is_compex42x())
++			machine_is_compex42x() || machine_is_ap1000())
+ 		pci_common_init(&ixdp425_pci);
+ 	return 0;
+ }
diff --git a/target/linux/ixp4xx/patches-3.18/151-lanready_ap1000_mac_plat_info.patch b/target/linux/ixp4xx/patches-3.18/151-lanready_ap1000_mac_plat_info.patch
new file mode 100644
index 0000000..2079589
--- /dev/null
+++ b/target/linux/ixp4xx/patches-3.18/151-lanready_ap1000_mac_plat_info.patch
@@ -0,0 +1,51 @@
+--- a/arch/arm/mach-ixp4xx/ap1000-setup.c
++++ b/arch/arm/mach-ixp4xx/ap1000-setup.c
+@@ -91,15 +91,45 @@ static struct platform_device ap1000_uar
+ 	.resource		= ap1000_uart_resources
+ };
+ 
++/* Built-in 10/100 Ethernet MAC interfaces */
++static struct eth_plat_info ap1000_plat_eth[] = {
++	{
++		.phy		= IXP4XX_ETH_PHY_MAX_ADDR,
++		.phy_mask	= 0x1e,
++		.rxq		= 3,
++		.txreadyq	= 20,
++	}, {
++		.phy		= 5,
++		.rxq		= 4,
++		.txreadyq	= 21,
++	}
++};
++
++static struct platform_device ap1000_eth[] = {
++	{
++		.name			= "ixp4xx_eth",
++		.id			= IXP4XX_ETH_NPEB,
++		.dev.platform_data	= ap1000_plat_eth,
++		.dev.coherent_dma_mask	= DMA_BIT_MASK(32),
++	}, {
++		.name			= "ixp4xx_eth",
++		.id			= IXP4XX_ETH_NPEC,
++		.dev.platform_data	= ap1000_plat_eth + 1,
++		.dev.coherent_dma_mask	= DMA_BIT_MASK(32),
++	}
++};
++
+ static struct platform_device *ap1000_devices[] __initdata = {
+ 	&ap1000_flash,
+-	&ap1000_uart
++	&ap1000_uart,
++	&ap1000_eth[0],
++	&ap1000_eth[1],
+ };
+ 
+ static char ap1000_mem_fixup[] __initdata = "mem=64M ";
+ 
+-static void __init ap1000_fixup(struct machine_desc *desc,
+-		struct tag *tags, char **cmdline, struct meminfo *mi)
++static void __init ap1000_fixup(struct tag *tags, char **cmdline,
++				struct meminfo *mi)
+ 
+ {
+ 	struct tag *t = tags;
diff --git a/target/linux/ixp4xx/patches-3.18/160-delayed_uart_io.patch b/target/linux/ixp4xx/patches-3.18/160-delayed_uart_io.patch
new file mode 100644
index 0000000..54dc905
--- /dev/null
+++ b/target/linux/ixp4xx/patches-3.18/160-delayed_uart_io.patch
@@ -0,0 +1,121 @@
+--- a/drivers/tty/serial/8250/8250_core.c
++++ b/drivers/tty/serial/8250/8250_core.c
+@@ -416,6 +416,20 @@ static void mem_serial_out(struct uart_p
+ 	writeb(value, p->membase + offset);
+ }
+ 
++static unsigned int memdelay_serial_in(struct uart_port *p, int offset)
++{
++	struct uart_8250_port *up = (struct uart_8250_port *)p;
++	udelay(up->port.rw_delay);
++	return mem_serial_in(p, offset);
++}
++
++static void memdelay_serial_out(struct uart_port *p, int offset, int value)
++{
++	struct uart_8250_port *up = (struct uart_8250_port *)p;
++	udelay(up->port.rw_delay);
++	mem_serial_out(p, offset, value);
++}
++
+ static void mem32_serial_out(struct uart_port *p, int offset, int value)
+ {
+ 	offset = offset << p->regshift;
+@@ -466,6 +480,11 @@ static void set_io_from_upio(struct uart
+ 		p->serial_out = mem32_serial_out;
+ 		break;
+ 
++	case UPIO_MEM_DELAY:
++		p->serial_in = memdelay_serial_in;
++		p->serial_out = memdelay_serial_out;
++		break;
++
+ #if defined(CONFIG_MIPS_ALCHEMY) || defined(CONFIG_SERIAL_8250_RT288X)
+ 	case UPIO_AU:
+ 		p->serial_in = au_serial_in;
+@@ -491,6 +510,7 @@ serial_port_out_sync(struct uart_port *p
+ 	switch (p->iotype) {
+ 	case UPIO_MEM:
+ 	case UPIO_MEM32:
++	case UPIO_MEM_DELAY:
+ 	case UPIO_AU:
+ 		p->serial_out(p, offset, value);
+ 		p->serial_in(p, UART_LCR);	/* safe, no side-effects */
+@@ -2655,6 +2675,7 @@ static int serial8250_request_std_resour
+ 	case UPIO_TSI:
+ 	case UPIO_MEM32:
+ 	case UPIO_MEM:
++	case UPIO_MEM_DELAY:
+ 		if (!port->mapbase)
+ 			break;
+ 
+@@ -2691,6 +2712,7 @@ static void serial8250_release_std_resou
+ 	case UPIO_TSI:
+ 	case UPIO_MEM32:
+ 	case UPIO_MEM:
++	case UPIO_MEM_DELAY:
+ 		if (!port->mapbase)
+ 			break;
+ 
+@@ -3424,6 +3446,7 @@ static int serial8250_probe(struct platf
+ 		uart.port.set_termios	= p->set_termios;
+ 		uart.port.pm		= p->pm;
+ 		uart.port.dev		= &dev->dev;
++		uart.port.rw_delay	= p->rw_delay;
+ 		uart.port.irqflags	|= irqflag;
+ 		ret = serial8250_register_8250_port(&uart);
+ 		if (ret < 0) {
+@@ -3580,6 +3603,7 @@ int serial8250_register_8250_port(struct
+ 		uart->port.flags        = up->port.flags | UPF_BOOT_AUTOCONF;
+ 		uart->bugs		= up->bugs;
+ 		uart->port.mapbase      = up->port.mapbase;
++		uart->port.rw_delay	= up->port.rw_delay;
+ 		uart->port.private_data = up->port.private_data;
+ 		uart->port.fifosize	= up->port.fifosize;
+ 		uart->tx_loadsz		= up->tx_loadsz;
+--- a/drivers/tty/serial/serial_core.c
++++ b/drivers/tty/serial/serial_core.c
+@@ -2090,6 +2090,7 @@ uart_report_port(struct uart_driver *drv
+ 		snprintf(address, sizeof(address),
+ 			 "I/O 0x%lx offset 0x%x", port->iobase, port->hub6);
+ 		break;
++	case UPIO_MEM_DELAY:
+ 	case UPIO_MEM:
+ 	case UPIO_MEM32:
+ 	case UPIO_AU:
+@@ -2736,6 +2737,7 @@ int uart_match_port(struct uart_port *po
+ 	case UPIO_HUB6:
+ 		return (port1->iobase == port2->iobase) &&
+ 		       (port1->hub6   == port2->hub6);
++	case UPIO_MEM_DELAY:
+ 	case UPIO_MEM:
+ 	case UPIO_MEM32:
+ 	case UPIO_AU:
+--- a/include/linux/serial_8250.h
++++ b/include/linux/serial_8250.h
+@@ -27,6 +27,7 @@ struct plat_serial8250_port {
+ 	void            *private_data;
+ 	unsigned char	regshift;	/* register shift */
+ 	unsigned char	iotype;		/* UPIO_* */
++	unsigned int rw_delay;	/* udelay for slower busses IXP4XX Expansion Bus */
+ 	unsigned char	hub6;
+ 	upf_t		flags;		/* UPF_* flags */
+ 	unsigned int	type;		/* If UPF_FIXED_TYPE */
+--- a/include/linux/serial_core.h
++++ b/include/linux/serial_core.h
+@@ -146,6 +146,7 @@ struct uart_port {
+ #define UPIO_MEM32		(3)
+ #define UPIO_AU			(4)			/* Au1x00 and RT288x type IO */
+ #define UPIO_TSI		(5)			/* Tsi108/109 type IO */
++#define UPIO_MEM_DELAY		(6)
+ 
+ 	unsigned int		read_status_mask;	/* driver specific */
+ 	unsigned int		ignore_status_mask;	/* driver specific */
+@@ -202,6 +203,7 @@ struct uart_port {
+ 	int			hw_stopped;		/* sw-assisted CTS flow state */
+ 	unsigned int		mctrl;			/* current modem ctrl settings */
+ 	unsigned int		timeout;		/* character-based timeout */
++	unsigned int		rw_delay;		/* udelay for slow busses, IXP4XX Expansion Bus */
+ 	unsigned int		type;			/* port type */
+ 	const struct uart_ops	*ops;
+ 	unsigned int		custom_divisor;
diff --git a/target/linux/ixp4xx/patches-3.18/162-wg302v1_mem_fixup.patch b/target/linux/ixp4xx/patches-3.18/162-wg302v1_mem_fixup.patch
new file mode 100644
index 0000000..75212bc
--- /dev/null
+++ b/target/linux/ixp4xx/patches-3.18/162-wg302v1_mem_fixup.patch
@@ -0,0 +1,38 @@
+--- a/arch/arm/mach-ixp4xx/wg302v1-setup.c
++++ b/arch/arm/mach-ixp4xx/wg302v1-setup.c
+@@ -117,6 +117,35 @@ static struct platform_device *wg302v1_d
+ 	&wg302v1_eth[0],
+ };
+ 
++static char wg302v1_mem_fixup[] __initdata = " mem=32M";
++
++static void __init wg302v1_fixup(struct tag *tags, char **cmdline,
++				 struct meminfo *mi)
++{
++	struct tag *t = tags;
++	char *p = *cmdline;
++	size_t fixlen, cmdlen;
++
++	/* Find the end of the tags table, taking note of any cmdline tag. */
++	for (; t->hdr.size; t = tag_next(t)) {
++		if (t->hdr.tag == ATAG_CMDLINE) {
++			p = t->u.cmdline.cmdline;
++		}
++	}
++
++	fixlen = strlen(wg302v1_mem_fixup);
++	cmdlen = strlen(p);
++	if (fixlen + cmdlen >= COMMAND_LINE_SIZE)
++		return;
++
++	/* append the fixup to the cmdline */
++	memmove(p + cmdlen, wg302v1_mem_fixup, fixlen + 1);
++
++	/* Adjust the size of the atag if there was one */
++	if (t->hdr.size)
++		t->hdr.size += fixlen;
++}
++
+ static void __init wg302v1_init(void)
+ {
+ 	ixp4xx_sys_init();
diff --git a/target/linux/ixp4xx/patches-3.18/170-ixdpg425_mac_plat_info.patch b/target/linux/ixp4xx/patches-3.18/170-ixdpg425_mac_plat_info.patch
new file mode 100644
index 0000000..f7090cd
--- /dev/null
+++ b/target/linux/ixp4xx/patches-3.18/170-ixdpg425_mac_plat_info.patch
@@ -0,0 +1,51 @@
+--- a/arch/arm/mach-ixp4xx/coyote-setup.c
++++ b/arch/arm/mach-ixp4xx/coyote-setup.c
+@@ -14,6 +14,7 @@
+ #include <linux/serial.h>
+ #include <linux/tty.h>
+ #include <linux/serial_8250.h>
++#include <linux/dma-mapping.h>
+ 
+ #include <asm/types.h>
+ #include <asm/setup.h>
+@@ -81,9 +82,39 @@ static struct platform_device coyote_uar
+ 	.resource	= &coyote_uart_resource,
+ };
+ 
++/* Built-in 10/100 Ethernet MAC interfaces */
++static struct eth_plat_info ixdpg425_plat_eth[] = {
++        {
++                .phy            = 5,
++                .rxq            = 3,
++                .txreadyq       = 20,
++        }, {
++                .phy            = 4,
++                .rxq            = 4,
++                .txreadyq       = 21,
++        }
++};
++
++static struct platform_device ixdpg425_eth[] = {
++	{
++		.name			= "ixp4xx_eth",
++		.id			= IXP4XX_ETH_NPEB,
++		.dev.platform_data	= ixdpg425_plat_eth,
++		.dev.coherent_dma_mask	= DMA_BIT_MASK(32),
++	}, {
++		.name			= "ixp4xx_eth",
++		.id			= IXP4XX_ETH_NPEC,
++		.dev.platform_data	= ixdpg425_plat_eth + 1,
++		.dev.coherent_dma_mask	= DMA_BIT_MASK(32),
++	}
++};
++
++
+ static struct platform_device *coyote_devices[] __initdata = {
+ 	&coyote_flash,
+-	&coyote_uart
++	&coyote_uart,
++	&ixdpg425_eth[0],
++	&ixdpg425_eth[1],
+ };
+ 
+ static void __init coyote_init(void)
diff --git a/target/linux/ixp4xx/patches-3.18/175-avila_hss_audio_support.patch b/target/linux/ixp4xx/patches-3.18/175-avila_hss_audio_support.patch
new file mode 100644
index 0000000..92342bf
--- /dev/null
+++ b/target/linux/ixp4xx/patches-3.18/175-avila_hss_audio_support.patch
@@ -0,0 +1,2090 @@
+--- a/sound/soc/Kconfig
++++ b/sound/soc/Kconfig
+@@ -55,6 +55,7 @@ source "sound/soc/spear/Kconfig"
+ source "sound/soc/tegra/Kconfig"
+ source "sound/soc/txx9/Kconfig"
+ source "sound/soc/ux500/Kconfig"
++source "sound/soc/gw-avila/Kconfig"
+ 
+ # Supported codecs
+ source "sound/soc/codecs/Kconfig"
+--- a/sound/soc/Makefile
++++ b/sound/soc/Makefile
+@@ -32,3 +32,4 @@ obj-$(CONFIG_SND_SOC)	+= spear/
+ obj-$(CONFIG_SND_SOC)	+= tegra/
+ obj-$(CONFIG_SND_SOC)	+= txx9/
+ obj-$(CONFIG_SND_SOC)	+= ux500/
++obj-$(CONFIG_SND_SOC)	+= gw-avila/
+--- /dev/null
++++ b/sound/soc/gw-avila/Kconfig
+@@ -0,0 +1,17 @@
++config SND_GW_AVILA_SOC_PCM
++	tristate
++
++config SND_GW_AVILA_SOC_HSS
++	tristate
++
++config SND_GW_AVILA_SOC
++	tristate "SoC Audio for the Gateworks AVILA Family"
++	depends on ARCH_IXP4XX && SND_SOC
++	select SND_GW_AVILA_SOC_PCM
++	select SND_GW_AVILA_SOC_HSS
++	select SND_SOC_TLV320AIC3X
++	help
++	  Say Y or M if you want to add support for codecs attached to
++	  the Gateworks HSS interface. You will also need
++	  to select the audio interfaces to support below.
++
+--- /dev/null
++++ b/sound/soc/gw-avila/Makefile
+@@ -0,0 +1,8 @@
++# Gateworks Avila HSS Platform Support
++snd-soc-gw-avila-objs := gw-avila.o ixp4xx_hss.o
++snd-soc-gw-avila-pcm-objs := gw-avila-pcm.o
++snd-soc-gw-avila-hss-objs := gw-avila-hss.o
++
++obj-$(CONFIG_SND_GW_AVILA_SOC) += snd-soc-gw-avila.o
++obj-$(CONFIG_SND_GW_AVILA_SOC_PCM) += snd-soc-gw-avila-pcm.o
++obj-$(CONFIG_SND_GW_AVILA_SOC_HSS) += snd-soc-gw-avila-hss.o
+--- /dev/null
++++ b/sound/soc/gw-avila/gw-avila-hss.c
+@@ -0,0 +1,103 @@
++/*
++ * gw-avila-hss.c -- HSS Audio Support for Gateworks Avila
++ *
++ * Author:	Chris Lang	<clang@gateworks.com>
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++
++#include <linux/init.h>
++#include <linux/module.h>
++#include <linux/platform_device.h>
++#include <linux/interrupt.h>
++#include <linux/wait.h>
++#include <linux/delay.h>
++
++#include <sound/core.h>
++#include <sound/pcm.h>
++#include <sound/ac97_codec.h>
++#include <sound/initval.h>
++#include <sound/soc.h>
++
++#include <asm/irq.h>
++#include <linux/mutex.h>
++#include <linux/gpio.h>
++
++#include "ixp4xx_hss.h"
++#include "gw-avila-hss.h"
++
++#define gw_avila_hss_suspend	NULL
++#define gw_avila_hss_resume	NULL
++
++struct snd_soc_dai_driver gw_avila_hss_dai = {
++	.playback = {
++		.channels_min = 2,
++		.channels_max = 2,
++		.rates = (SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_16000 |
++			SNDRV_PCM_RATE_22050 | SNDRV_PCM_RATE_32000 |
++			SNDRV_PCM_RATE_44100 | SNDRV_PCM_RATE_48000 |
++			SNDRV_PCM_RATE_88200 | SNDRV_PCM_RATE_96000 |
++			SNDRV_PCM_RATE_KNOT),
++		.formats = SNDRV_PCM_FMTBIT_S16_LE, },
++	.capture = {
++		.channels_min = 2,
++		.channels_max = 2,
++		.rates = (SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_16000 |
++			SNDRV_PCM_RATE_22050 | SNDRV_PCM_RATE_32000 |
++			SNDRV_PCM_RATE_44100 | SNDRV_PCM_RATE_48000 |
++			SNDRV_PCM_RATE_88200 | SNDRV_PCM_RATE_96000 |
++			SNDRV_PCM_RATE_KNOT),
++		.formats = SNDRV_PCM_FMTBIT_S16_LE, },
++};
++
++static const struct snd_soc_component_driver gw_avila_hss_component = {
++	.name   = "gw_avila_hss",
++};
++
++static int gw_avila_hss_probe(struct platform_device *pdev)
++{
++	int port = (pdev->id < 2) ? 0 : 1;
++	int channel = (pdev->id % 2);
++
++	hss_handle[pdev->id] = hss_init(port, channel);
++	if (!hss_handle[pdev->id]) {
++		return -ENODEV;
++	}
++
++	return snd_soc_register_component(&pdev->dev, &gw_avila_hss_component,
++					  &gw_avila_hss_dai, 1);
++}
++
++static int gw_avila_hss_remove(struct platform_device *pdev)
++{
++	snd_soc_unregister_component(&pdev->dev);
++
++	return 0;
++}
++
++static struct platform_driver gw_avila_hss_driver = {
++	.probe    = gw_avila_hss_probe,
++	.remove   = gw_avila_hss_remove,
++	.driver   = {
++		.name = "gw_avila_hss",
++		.owner  = THIS_MODULE,
++	}
++};
++
++static int __init gw_avila_hss_init(void)
++{
++	return platform_driver_register(&gw_avila_hss_driver);
++}
++module_init(gw_avila_hss_init);
++
++static void __exit gw_avila_hss_exit(void)
++{
++	platform_driver_unregister(&gw_avila_hss_driver);
++}
++module_exit(gw_avila_hss_exit);
++
++MODULE_AUTHOR("Chris Lang");
++MODULE_DESCRIPTION("HSS Audio Driver for Gateworks Avila");
++MODULE_LICENSE("GPL");
+--- /dev/null
++++ b/sound/soc/gw-avila/gw-avila-hss.h
+@@ -0,0 +1,12 @@
++/*
++ * Author: Chris Lang <clang@gateworks.com>
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++
++#ifndef _GW_AVILA_HSS_H
++#define _GW_AVILA_HSS_H
++
++#endif
+--- /dev/null
++++ b/sound/soc/gw-avila/gw-avila-pcm.c
+@@ -0,0 +1,327 @@
++/*
++ * ALSA PCM interface for the TI DAVINCI processor
++ *
++ * Author:      Chris Lang, <clang@gateworks.com>
++ * Copyright:   (C) 2009 Gateworks Corporation
++ *
++ * Based On:    davinci-evm.c, Author: Vladimir Barinov, <vbarinov@ru.mvista.com>
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++
++#include <linux/module.h>
++#include <linux/init.h>
++#include <linux/platform_device.h>
++#include <linux/slab.h>
++#include <linux/dma-mapping.h>
++
++#include <sound/core.h>
++#include <sound/pcm.h>
++#include <sound/pcm_params.h>
++#include <sound/soc.h>
++
++#include <asm/dma.h>
++
++#include "gw-avila-pcm.h"
++#include "gw-avila-hss.h"
++#include "ixp4xx_hss.h"
++
++#define GW_AVILA_PCM_DEBUG 0
++#if GW_AVILA_PCM_DEBUG
++#define DPRINTK(x...) printk(KERN_DEBUG x)
++#else
++#define DPRINTK(x...)
++#endif
++
++static struct snd_pcm_hardware gw_avila_pcm_hardware = {
++	.info = (SNDRV_PCM_INFO_INTERLEAVED | SNDRV_PCM_INFO_BLOCK_TRANSFER |
++		 SNDRV_PCM_INFO_MMAP | SNDRV_PCM_INFO_MMAP_VALID),
++/*		 SNDRV_PCM_INFO_PAUSE),*/
++	.formats = (SNDRV_PCM_FMTBIT_S16_LE),
++	.rates = (SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_16000 |
++		  SNDRV_PCM_RATE_22050 | SNDRV_PCM_RATE_32000 |
++		  SNDRV_PCM_RATE_44100 | SNDRV_PCM_RATE_48000 |
++		  SNDRV_PCM_RATE_88200 | SNDRV_PCM_RATE_96000 |
++		  SNDRV_PCM_RATE_KNOT),
++	.rate_min = 8000,
++	.rate_max = 8000,
++	.channels_min = 2,
++	.channels_max = 2,
++	.buffer_bytes_max = 64 * 1024, // All of the lines below may need to be changed
++	.period_bytes_min = 128,
++	.period_bytes_max = 4 * 1024,
++	.periods_min = 16,
++	.periods_max = 32,
++	.fifo_size = 0,
++};
++
++struct gw_avila_runtime_data {
++	spinlock_t lock;
++	int period;		/* current DMA period */
++	int master_lch;		/* Master DMA channel */
++	int slave_lch;		/* Slave DMA channel */
++	struct gw_avila_pcm_dma_params *params;	/* DMA params */
++};
++
++static void gw_avila_dma_irq(void *data)
++{
++	struct snd_pcm_substream *substream = data;
++	snd_pcm_period_elapsed(substream);
++}
++
++static int gw_avila_pcm_trigger(struct snd_pcm_substream *substream, int cmd)
++{
++	struct snd_pcm_runtime *runtime = substream->runtime;
++	struct hss_device *hdev = runtime->private_data;
++	int ret = 0;
++
++	switch (cmd) {
++	case SNDRV_PCM_TRIGGER_START:
++	case SNDRV_PCM_TRIGGER_RESUME:
++	case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
++		if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
++			hss_tx_start(hdev);
++		else
++			hss_rx_start(hdev);
++		break;
++	case SNDRV_PCM_TRIGGER_STOP:
++	case SNDRV_PCM_TRIGGER_SUSPEND:
++	case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
++		if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
++			hss_tx_stop(hdev);
++		else
++			hss_rx_stop(hdev);
++		break;
++	default:
++		ret = -EINVAL;
++		break;
++	}
++	return ret;
++}
++
++static int gw_avila_pcm_prepare(struct snd_pcm_substream *substream)
++{
++	struct snd_pcm_runtime *runtime = substream->runtime;
++	struct hss_device *hdev = runtime->private_data;
++
++	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
++		hss_set_tx_callback(hdev, gw_avila_dma_irq, substream);
++		hss_config_tx_dma(hdev, runtime->dma_area, runtime->buffer_size, runtime->period_size);
++	} else {
++		hss_set_rx_callback(hdev, gw_avila_dma_irq, substream);
++		hss_config_rx_dma(hdev, runtime->dma_area, runtime->buffer_size, runtime->period_size);
++	}
++
++	return 0;
++}
++
++static snd_pcm_uframes_t
++gw_avila_pcm_pointer(struct snd_pcm_substream *substream)
++{
++	struct snd_pcm_runtime *runtime = substream->runtime;
++	struct hss_device *hdev = runtime->private_data;
++
++	unsigned int curr = 0;
++	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
++		curr = hss_curr_offset_tx(hdev);
++	else
++		curr = hss_curr_offset_rx(hdev);
++  return curr;
++}
++
++static int gw_avila_pcm_open(struct snd_pcm_substream *substream)
++{
++	struct snd_pcm_runtime *runtime = substream->runtime;
++	struct snd_soc_pcm_runtime *rtd = substream->private_data;
++	struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
++
++	snd_soc_set_runtime_hwparams(substream, &gw_avila_pcm_hardware);
++
++	if (hss_handle[cpu_dai->id] != NULL)
++		runtime->private_data = hss_handle[cpu_dai->id];
++	else {
++		pr_err("hss_handle is NULL\n");
++		return -1;
++	}
++
++	hss_chan_open(hss_handle[cpu_dai->id]);
++
++	return 0;
++}
++
++static int gw_avila_pcm_close(struct snd_pcm_substream *substream)
++{
++	struct snd_pcm_runtime *runtime = substream->runtime;
++	struct hss_device *hdev = runtime->private_data;
++
++	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
++		memset(hdev->tx_buf, 0, runtime->buffer_size);
++	} else
++		memset(hdev->rx_buf, 0, runtime->buffer_size);
++
++	hss_chan_close(hdev);
++
++	return 0;
++}
++
++static int gw_avila_pcm_hw_params(struct snd_pcm_substream *substream,
++				 struct snd_pcm_hw_params *hw_params)
++{
++	return snd_pcm_lib_malloc_pages(substream,
++					params_buffer_bytes(hw_params));
++}
++
++static int gw_avila_pcm_hw_free(struct snd_pcm_substream *substream)
++{
++	struct snd_pcm_runtime *runtime = substream->runtime;
++
++	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
++	  memset(runtime->dma_area, 0, runtime->buffer_size);
++
++	return snd_pcm_lib_free_pages(substream);
++}
++
++static int gw_avila_pcm_mmap(struct snd_pcm_substream *substream,
++          struct vm_area_struct *vma)
++{
++	struct snd_pcm_runtime *runtime = substream->runtime;
++
++	return dma_mmap_writecombine(substream->pcm->card->dev, vma,
++						runtime->dma_area,
++						runtime->dma_addr,
++						runtime->dma_bytes);
++}
++
++struct snd_pcm_ops gw_avila_pcm_ops = {
++	.open = 	gw_avila_pcm_open,
++	.close = 	gw_avila_pcm_close,
++	.ioctl = 	snd_pcm_lib_ioctl,
++	.hw_params = 	gw_avila_pcm_hw_params,
++	.hw_free = 	gw_avila_pcm_hw_free,
++	.prepare = 	gw_avila_pcm_prepare,
++	.trigger = 	gw_avila_pcm_trigger,
++	.pointer = 	gw_avila_pcm_pointer,
++	.mmap = gw_avila_pcm_mmap,
++};
++
++static int gw_avila_pcm_preallocate_dma_buffer(struct snd_pcm *pcm, int stream)
++{
++	struct snd_pcm_substream *substream = pcm->streams[stream].substream;
++	struct snd_dma_buffer *buf = &substream->dma_buffer;
++	size_t size = gw_avila_pcm_hardware.buffer_bytes_max;
++
++	buf->dev.type = SNDRV_DMA_TYPE_DEV;
++	buf->dev.dev = pcm->card->dev;
++	buf->private_data = NULL;
++
++	buf->area = dma_alloc_coherent(pcm->card->dev, size,
++					   &buf->addr, GFP_KERNEL);
++
++	if (!buf->area) {
++		return -ENOMEM;
++	}
++
++	memset(buf->area, 0xff, size);
++
++	DPRINTK("preallocate_dma_buffer: area=%p, addr=%p, size=%d\n",
++		(void *) buf->area, (void *) buf->addr, size);
++
++	buf->bytes = size;
++
++	return 0;
++}
++
++static void gw_avila_pcm_free(struct snd_pcm *pcm)
++{
++	struct snd_pcm_substream *substream;
++	struct snd_dma_buffer *buf;
++	int stream;
++
++	for (stream = 0; stream < 2; stream++) {
++		substream = pcm->streams[stream].substream;
++		if (!substream)
++			continue;
++
++		buf = &substream->dma_buffer;
++		if (!buf->area)
++			continue;
++
++		dma_free_coherent(NULL, buf->bytes, buf->area, 0);
++		buf->area = NULL;
++	}
++}
++
++static u64 gw_avila_pcm_dmamask = 0xFFFFFFFF;
++
++static int gw_avila_pcm_new(struct snd_soc_pcm_runtime *rtd)
++{
++        struct snd_card *card = rtd->card->snd_card;
++        struct snd_pcm *pcm = rtd->pcm;
++        struct snd_soc_dai *dai = rtd->codec_dai;
++	int ret;
++
++	if (!card->dev->dma_mask)
++		card->dev->dma_mask = &gw_avila_pcm_dmamask;
++	if (!card->dev->coherent_dma_mask)
++		card->dev->coherent_dma_mask = 0xFFFFFFFF;
++
++	if (dai->driver->playback.channels_min) {
++		ret = gw_avila_pcm_preallocate_dma_buffer(pcm,
++			SNDRV_PCM_STREAM_PLAYBACK);
++		if (ret)
++			return ret;
++	}
++
++	if (dai->driver->capture.channels_min) {
++		ret = gw_avila_pcm_preallocate_dma_buffer(pcm,
++			SNDRV_PCM_STREAM_CAPTURE);
++		if (ret)
++			return ret;
++	}
++
++	return 0;
++}
++
++struct snd_soc_platform_driver gw_avila_soc_platform = {
++	.ops = 	&gw_avila_pcm_ops,
++	.pcm_new = 	gw_avila_pcm_new,
++	.pcm_free = 	gw_avila_pcm_free,
++};
++
++static int gw_avila_pcm_platform_probe(struct platform_device *pdev)
++{
++	return snd_soc_register_platform(&pdev->dev, &gw_avila_soc_platform);
++}
++
++static int gw_avila_pcm_platform_remove(struct platform_device *pdev)
++{
++	snd_soc_unregister_platform(&pdev->dev);
++	return 0;
++}
++
++static struct platform_driver gw_avila_pcm_driver = {
++	.driver = {
++		.name = "gw_avila-audio",
++		.owner = THIS_MODULE,
++	},
++	.probe = gw_avila_pcm_platform_probe,
++	.remove = gw_avila_pcm_platform_remove,
++};
++
++static int __init gw_avila_soc_platform_init(void)
++{
++	return platform_driver_register(&gw_avila_pcm_driver);
++}
++module_init(gw_avila_soc_platform_init);
++
++static void __exit gw_avila_soc_platform_exit(void)
++{
++	platform_driver_unregister(&gw_avila_pcm_driver);
++}
++module_exit(gw_avila_soc_platform_exit);
++
++MODULE_AUTHOR("Chris Lang");
++MODULE_DESCRIPTION("Gateworks Avila PCM DMA module");
++MODULE_LICENSE("GPL");
+--- /dev/null
++++ b/sound/soc/gw-avila/gw-avila-pcm.h
+@@ -0,0 +1,32 @@
++/*
++ * ALSA PCM interface for the Gateworks Avila platform
++ *
++ * Author:      Chris Lang, <clang@gateworks.com>
++ * Copyright:   (C) 2009 Gateworks Corporation
++ *
++ * Based On:    davinci-evm.c, Author: Vladimir Barinov, <vbarinov@ru.mvista.com>
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++
++#ifndef _GW_AVILA_PCM_H
++#define _GW_AVILA_PCM_H
++
++#if 0
++struct gw_avila_pcm_dma_params {
++	char *name;		/* stream identifier */
++	int channel;		/* sync dma channel ID */
++	dma_addr_t dma_addr;	/* device physical address for DMA */
++	unsigned int data_type;	/* xfer data type */
++};
++
++struct gw_avila_snd_platform_data {
++	int tx_dma_ch; // XXX Do we need this?
++	int rx_dma_ch; // XXX Do we need this
++};
++extern struct snd_soc_platform gw_avila_soc_platform[];
++#endif
++
++#endif
+--- /dev/null
++++ b/sound/soc/gw-avila/gw-avila.c
+@@ -0,0 +1,244 @@
++/*
++ * File:         sound/soc/gw-avila/gw_avila.c
++ * Author:       Chris Lang <clang@gateworks.com>
++ *
++ * Created:      Tue June 06 2008
++ * Description:  Board driver for Gateworks Avila
++ *
++ * Modified:
++ *               Copyright 2009 Gateworks Corporation
++ *
++ * Bugs:         What Bugs?
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, see the file COPYING, or write
++ * to the Free Software Foundation, Inc.,
++ * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
++ */
++
++#include <linux/module.h>
++#include <linux/moduleparam.h>
++#include <linux/device.h>
++#include <asm/dma.h>
++#include <linux/platform_device.h>
++#include <sound/core.h>
++#include <sound/pcm.h>
++#include <sound/soc.h>
++#include <linux/slab.h>
++#include <linux/gpio.h>
++
++#include "ixp4xx_hss.h"
++#include "gw-avila-hss.h"
++#include "gw-avila-pcm.h"
++
++#define CODEC_FREQ 33333000
++
++static int gw_avila_board_startup(struct snd_pcm_substream *substream)
++{
++	pr_debug("%s enter\n", __func__);
++	return 0;
++}
++
++static int gw_avila_hw_params(struct snd_pcm_substream *substream,
++		struct snd_pcm_hw_params *params)
++{
++	struct snd_soc_pcm_runtime *rtd = substream->private_data;
++	struct snd_soc_dai *codec_dai = rtd->codec_dai;
++	struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
++
++	int ret = 0;
++
++	/* set codec DAI configuration */
++	if (cpu_dai->id % 2) {
++  		ret = snd_soc_dai_set_fmt(codec_dai, SND_SOC_DAIFMT_DSP_B | SND_SOC_DAIFMT_IB_NF | SND_SOC_DAIFMT_CBS_CFS);
++			snd_soc_dai_set_tdm_slot(codec_dai, 0, 0, 1, 32);
++	} else {
++	  	ret = snd_soc_dai_set_fmt(codec_dai, SND_SOC_DAIFMT_DSP_B | SND_SOC_DAIFMT_IB_NF | SND_SOC_DAIFMT_CBM_CFM);
++			snd_soc_dai_set_tdm_slot(codec_dai, 0, 0, 0, 32);
++	}
++
++	if (ret < 0)
++	    return ret;
++
++	/* set the codec system clock */
++	ret = snd_soc_dai_set_sysclk(codec_dai, 0, CODEC_FREQ, SND_SOC_CLOCK_OUT);
++	if (ret < 0)
++	    return ret;
++
++	return 0;
++}
++
++static const struct snd_soc_dapm_widget aic3x_dapm_widgets[] = {
++  SND_SOC_DAPM_HP("Headphone Jack", NULL),
++  SND_SOC_DAPM_LINE("Line Out", NULL),
++  SND_SOC_DAPM_LINE("Line In", NULL),
++};
++
++static const struct snd_soc_dapm_route audio_map[] = {
++  {"Headphone Jack", NULL, "HPLOUT"},
++  {"Headphone Jack", NULL, "HPROUT"},
++
++  /* Line Out connected to LLOUT, RLOUT */
++  {"Line Out", NULL, "LLOUT"},
++  {"Line Out", NULL, "RLOUT"},
++
++  /* Line In connected to (LINE1L | LINE2L), (LINE1R | LINE2R) */
++  {"LINE1L", NULL, "Line In"},
++  {"LINE1R", NULL, "Line In"},
++};
++
++/* Logic for a aic3x as connected on a davinci-evm */
++static int avila_aic3x_init(struct snd_soc_pcm_runtime *rtd)
++{
++	struct snd_soc_codec *codec = rtd->codec;
++	struct snd_soc_dapm_context *dapm = &codec->dapm;
++
++  /* Add davinci-evm specific widgets */
++  snd_soc_dapm_new_controls(dapm, aic3x_dapm_widgets,
++          ARRAY_SIZE(aic3x_dapm_widgets));
++
++  /* Set up davinci-evm specific audio path audio_map */
++  snd_soc_dapm_add_routes(dapm, audio_map, ARRAY_SIZE(audio_map));
++
++  /* not connected */
++  snd_soc_dapm_disable_pin(dapm, "MONO_LOUT");
++  //snd_soc_dapm_disable_pin(dapm, "HPLCOM");
++  //snd_soc_dapm_disable_pin(dapm, "HPRCOM");
++  snd_soc_dapm_disable_pin(dapm, "MIC3L");
++  snd_soc_dapm_disable_pin(dapm, "MIC3R");
++  snd_soc_dapm_disable_pin(dapm, "LINE2L");
++  snd_soc_dapm_disable_pin(dapm, "LINE2R");
++
++  /* always connected */
++	snd_soc_dapm_enable_pin(dapm, "Headphone Jack");
++  snd_soc_dapm_enable_pin(dapm, "Line Out");
++  snd_soc_dapm_enable_pin(dapm, "Line In");
++
++  snd_soc_dapm_sync(dapm);
++
++	return 0;
++}
++
++static struct snd_soc_ops gw_avila_board_ops = {
++	.startup = gw_avila_board_startup,
++	.hw_params = gw_avila_hw_params,
++};
++
++static struct snd_soc_dai_link gw_avila_board_dai[] = {
++	{
++		.name = "HSS-0",
++		.stream_name = "HSS-0",
++		.cpu_dai_name = "gw_avila_hss.0",
++		.codec_dai_name = "tlv320aic3x-hifi",
++		.codec_name = "tlv320aic3x-codec.0-001b",
++		.platform_name = "gw_avila-audio.0",
++		.init = avila_aic3x_init,
++		.ops = &gw_avila_board_ops,
++	},{
++		.name = "HSS-1",
++		.stream_name = "HSS-1",
++		.cpu_dai_name = "gw_avila_hss.1",
++		.codec_dai_name = "tlv320aic3x-hifi",
++		.codec_name = "tlv320aic3x-codec.0-001a",
++		.platform_name = "gw_avila-audio.1",
++		.init = avila_aic3x_init,
++		.ops = &gw_avila_board_ops,
++	},{
++		.name = "HSS-2",
++		.stream_name = "HSS-2",
++		.cpu_dai_name = "gw_avila_hss.2",
++		.codec_dai_name = "tlv320aic3x-hifi",
++		.codec_name = "tlv320aic3x-codec.0-0019",
++		.platform_name = "gw_avila-audio.2",
++		.init = avila_aic3x_init,
++		.ops = &gw_avila_board_ops,
++	},{
++		.name = "HSS-3",
++		.stream_name = "HSS-3",
++		.cpu_dai_name = "gw_avila_hss.3",
++		.codec_dai_name = "tlv320aic3x-hifi",
++		.codec_name = "tlv320aic3x-codec.0-0018",
++		.platform_name = "gw_avila-audio.3",
++		.init = avila_aic3x_init,
++		.ops = &gw_avila_board_ops,
++	},
++};
++
++static struct snd_soc_card gw_avila_board[] = {
++	{
++		.name = "gw_avila-board.0",
++		.owner = THIS_MODULE,
++		.dai_link = &gw_avila_board_dai[0],
++		.num_links = 1,
++	},{
++		.name = "gw_avila-board.1",
++		.owner = THIS_MODULE,
++		.dai_link = &gw_avila_board_dai[1],
++		.num_links = 1,
++	},{
++		.name = "gw_avila-board.2",
++		.owner = THIS_MODULE,
++		.dai_link = &gw_avila_board_dai[2],
++		.num_links = 1,
++	},{
++		.name = "gw_avila-board.3",
++		.owner = THIS_MODULE,
++		.dai_link = &gw_avila_board_dai[3],
++		.num_links = 1,
++	}
++};
++
++static struct platform_device *gw_avila_board_snd_device[4];
++
++static int __init gw_avila_board_init(void)
++{
++	int ret;
++	struct port *port;
++	int i;
++
++	if ((hss_port[0] = kzalloc(sizeof(*port), GFP_KERNEL)) == NULL)
++		return -ENOMEM;
++
++	if ((hss_port[1] = kzalloc(sizeof(*port), GFP_KERNEL)) == NULL)
++		return -ENOMEM;
++
++	for (i = 0; i < 4; i++) {
++		gw_avila_board_snd_device[i] = platform_device_alloc("soc-audio", i);
++		if (!gw_avila_board_snd_device[i]) {
++			return -ENOMEM;
++		}
++
++		platform_set_drvdata(gw_avila_board_snd_device[i], &gw_avila_board[i]);
++		ret = platform_device_add(gw_avila_board_snd_device[i]);
++
++		if (ret) {
++			platform_device_put(gw_avila_board_snd_device[i]);
++		}
++	}
++	return ret;
++}
++
++static void __exit gw_avila_board_exit(void)
++{
++	int i;
++	for (i = 0; i < 4; i++)
++		platform_device_unregister(gw_avila_board_snd_device[i]);
++}
++
++module_init(gw_avila_board_init);
++module_exit(gw_avila_board_exit);
++
++/* Module information */
++MODULE_AUTHOR("Chris Lang");
++MODULE_DESCRIPTION("ALSA SoC HSS Audio gw_avila board");
++MODULE_LICENSE("GPL");
+--- /dev/null
++++ b/sound/soc/gw-avila/ixp4xx_hss.c
+@@ -0,0 +1,902 @@
++/*
++ * Intel IXP4xx HSS (synchronous serial port) driver for Linux
++ *
++ * Copyright (C) 2009 Chris Lang <clang@gateworks.com>
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of version 2 of the GNU General Public License
++ * as published by the Free Software Foundation.
++ */
++
++#include <linux/module.h>
++#include <linux/bitops.h>
++#include <linux/cdev.h>
++#include <linux/dma-mapping.h>
++#include <linux/dmapool.h>
++#include <linux/fs.h>
++#include <linux/io.h>
++#include <linux/kernel.h>
++#include <linux/platform_device.h>
++#include <linux/poll.h>
++#include <linux/slab.h>
++#include <linux/delay.h>
++
++#include <mach/npe.h>
++#include <mach/qmgr.h>
++
++#include "ixp4xx_hss.h"
++
++/*****************************************************************************
++ * global variables
++ ****************************************************************************/
++
++void hss_chan_read(unsigned long data);
++static char lock_init = 0;
++static spinlock_t npe_lock;
++static struct npe *npe;
++
++static const struct {
++	int tx, txdone, rx, rxfree, chan;
++}queue_ids[2] = {{HSS0_PKT_TX0_QUEUE, HSS0_PKT_TXDONE_QUEUE, HSS0_PKT_RX_QUEUE,
++		  HSS0_PKT_RXFREE0_QUEUE, HSS0_CHL_RXTRIG_QUEUE},
++		 {HSS1_PKT_TX0_QUEUE, HSS1_PKT_TXDONE_QUEUE, HSS1_PKT_RX_QUEUE,
++		  HSS1_PKT_RXFREE0_QUEUE, HSS1_CHL_RXTRIG_QUEUE},
++};
++
++struct port *hss_port[2];
++struct hss_device *hss_handle[32];
++EXPORT_SYMBOL(hss_handle);
++
++/*****************************************************************************
++ * utility functions
++ ****************************************************************************/
++
++#ifndef __ARMEB__
++static inline void memcpy_swab32(u32 *dest, u32 *src, int cnt)
++{
++	int i;
++	for (i = 0; i < cnt; i++)
++		dest[i] = swab32(src[i]);
++}
++#endif
++
++static inline unsigned int sub_offset(unsigned int a, unsigned int b,
++				      unsigned int modulo)
++{
++	return (modulo /* make sure the result >= 0 */ + a - b) % modulo;
++}
++
++/*****************************************************************************
++ * HSS access
++ ****************************************************************************/
++
++static void hss_config_load(struct port *port)
++{
++	struct msg msg;
++
++	do {
++		memset(&msg, 0, sizeof(msg));
++		msg.cmd = PORT_CONFIG_LOAD;
++		msg.hss_port = port->id;
++		if (npe_send_message(npe, &msg, "HSS_LOAD_CONFIG"))
++			break;
++		if (npe_recv_message(npe, &msg, "HSS_LOAD_CONFIG"))
++			break;
++
++		/* HSS_LOAD_CONFIG for port #1 returns port_id = #4 */
++		if (msg.cmd != PORT_CONFIG_LOAD || msg.data32)
++			break;
++
++		/* HDLC may stop working without this */
++		npe_recv_message(npe, &msg, "FLUSH_IT");
++		return;
++	} while (0);
++
++	printk(KERN_CRIT "HSS-%i: unable to reload HSS configuration\n",
++	       port->id);
++	BUG();
++}
++
++static void hss_config_set_pcr(struct port *port)
++{
++	struct msg msg;
++
++	do {
++		memset(&msg, 0, sizeof(msg));
++		msg.cmd = PORT_CONFIG_WRITE;
++		msg.hss_port = port->id;
++		msg.index = HSS_CONFIG_TX_PCR;
++#if 0
++		msg.data32 = PCR_FRM_SYNC_RISINGEDGE | PCR_MSB_ENDIAN |
++			PCR_TX_DATA_ENABLE | PCR_TX_UNASS_HIGH_IMP | PCR_TX_V56K_HIGH_IMP | PCR_TX_FB_HIGH_IMP;
++#else
++		msg.data32 = PCR_FRM_SYNC_RISINGEDGE | PCR_MSB_ENDIAN |
++			PCR_TX_DATA_ENABLE | PCR_TX_FB_HIGH_IMP | PCR_DCLK_EDGE_RISING;
++#endif
++		if (port->frame_size % 8 == 0)
++			msg.data32 |= PCR_SOF_NO_FBIT;
++
++		if (npe_send_message(npe, &msg, "HSS_SET_TX_PCR"))
++			break;
++
++		msg.index = HSS_CONFIG_RX_PCR;
++		msg.data32 &= ~ (PCR_DCLK_EDGE_RISING | PCR_FCLK_EDGE_RISING | PCR_TX_DATA_ENABLE);
++
++		if (npe_send_message(npe, &msg, "HSS_SET_RX_PCR"))
++			break;
++		return;
++	} while (0);
++
++	printk(KERN_CRIT "HSS-%i: unable to set HSS PCR registers\n", port->id);
++	BUG();
++}
++
++static void hss_config_set_core(struct port *port)
++{
++	struct msg msg;
++
++	memset(&msg, 0, sizeof(msg));
++	msg.cmd = PORT_CONFIG_WRITE;
++	msg.hss_port = port->id;
++	msg.index = HSS_CONFIG_CORE_CR;
++#if 0
++	msg.data32 = 0 | CCR_LOOPBACK |
++		(port->id ? CCR_SECOND_HSS : 0);
++#else
++	msg.data32 = 0 |
++		(port->id ? CCR_SECOND_HSS : 0);
++#endif
++	if (npe_send_message(npe, &msg, "HSS_SET_CORE_CR")) {
++		printk(KERN_CRIT "HSS-%i: unable to set HSS core control"
++		       " register\n", port->id);
++		BUG();
++	}
++}
++
++static void hss_config_set_line(struct port *port)
++{
++	struct msg msg;
++
++	hss_config_set_pcr(port);
++	hss_config_set_core(port);
++
++	memset(&msg, 0, sizeof(msg));
++	msg.cmd = PORT_CONFIG_WRITE;
++	msg.hss_port = port->id;
++	msg.index = HSS_CONFIG_CLOCK_CR;
++	msg.data32 = CLK42X_SPEED_8192KHZ /* FIXME */;
++	if (npe_send_message(npe, &msg, "HSS_SET_CLOCK_CR")) {
++		printk(KERN_CRIT "HSS-%i: unable to set HSS clock control"
++		       " register\n", port->id);
++		BUG();
++	}
++}
++
++static void hss_config_set_rx_frame(struct port *port)
++{
++	struct msg msg;
++
++	memset(&msg, 0, sizeof(msg));
++	msg.cmd = PORT_CONFIG_WRITE;
++	msg.hss_port = port->id;
++	msg.index = HSS_CONFIG_RX_FCR;
++	msg.data16a = port->frame_sync_offset;
++	msg.data16b = port->frame_size - 1;
++	if (npe_send_message(npe, &msg, "HSS_SET_RX_FCR")) {
++		printk(KERN_CRIT "HSS-%i: unable to set HSS RX frame size"
++		       " and offset\n", port->id);
++		BUG();
++	}
++}
++
++static void hss_config_set_frame(struct port *port)
++{
++	struct msg msg;
++
++	memset(&msg, 0, sizeof(msg));
++	msg.cmd = PORT_CONFIG_WRITE;
++	msg.hss_port = port->id;
++	msg.index = HSS_CONFIG_TX_FCR;
++	msg.data16a = TX_FRAME_SYNC_OFFSET;
++	msg.data16b = port->frame_size - 1;
++	if (npe_send_message(npe, &msg, "HSS_SET_TX_FCR")) {
++		printk(KERN_CRIT "HSS-%i: unable to set HSS TX frame size"
++		       " and offset\n", port->id);
++		BUG();
++	}
++	hss_config_set_rx_frame(port);
++}
++
++static void hss_config_set_lut(struct port *port)
++{
++	struct msg msg;
++	int chan_count = 32;
++
++	memset(&msg, 0, sizeof(msg));
++	msg.cmd = PORT_CONFIG_WRITE;
++	msg.hss_port = port->id;
++
++	msg.index = HSS_CONFIG_TX_LUT;
++	msg.data32 = 0xffffffff;
++	npe_send_message(npe, &msg, "HSS_SET_TX_LUT");
++	msg.index += 4;
++	npe_send_message(npe, &msg, "HSS_SET_TX_LUT");
++	msg.data32 = 0x0;
++	msg.index += 4;
++	npe_send_message(npe, &msg, "HSS_SET_TX_LUT");
++	msg.index += 4;
++	npe_send_message(npe, &msg, "HSS_SET_TX_LUT");
++	msg.index += 4;
++	npe_send_message(npe, &msg, "HSS_SET_TX_LUT");
++	msg.index += 4;
++	npe_send_message(npe, &msg, "HSS_SET_TX_LUT");
++	msg.index += 4;
++	npe_send_message(npe, &msg, "HSS_SET_TX_LUT");
++	msg.index += 4;
++	npe_send_message(npe, &msg, "HSS_SET_TX_LUT");
++
++	msg.index = HSS_CONFIG_RX_LUT;
++	msg.data32 = 0xffffffff;
++	npe_send_message(npe, &msg, "HSS_SET_RX_LUT");
++	msg.index += 4;
++	npe_send_message(npe, &msg, "HSS_SET_RX_LUT");
++	msg.data32 = 0x0;
++	msg.index += 4;
++	npe_send_message(npe, &msg, "HSS_SET_RX_LUT");
++	msg.index += 4;
++	npe_send_message(npe, &msg, "HSS_SET_RX_LUT");
++	msg.index += 4;
++	npe_send_message(npe, &msg, "HSS_SET_RX_LUT");
++	msg.index += 4;
++	npe_send_message(npe, &msg, "HSS_SET_RX_LUT");
++	msg.index += 4;
++	npe_send_message(npe, &msg, "HSS_SET_RX_LUT");
++	msg.index += 4;
++	npe_send_message(npe, &msg, "HSS_SET_RX_LUT");
++
++	hss_config_set_frame(port);
++
++	memset(&msg, 0, sizeof(msg));
++	msg.cmd = CHAN_NUM_CHANS_WRITE;
++	msg.hss_port = port->id;
++	msg.data8a = chan_count;
++	if (npe_send_message(npe, &msg, "CHAN_NUM_CHANS_WRITE")) {
++		printk(KERN_CRIT "HSS-%i: unable to set HSS channel count\n",
++		       port->id);
++		BUG();
++	}
++}
++
++static u32 hss_config_get_status(struct port *port)
++{
++	struct msg msg;
++
++	do {
++		memset(&msg, 0, sizeof(msg));
++		msg.cmd = PORT_ERROR_READ;
++		msg.hss_port = port->id;
++		if (npe_send_message(npe, &msg, "PORT_ERROR_READ"))
++			break;
++		if (npe_recv_message(npe, &msg, "PORT_ERROR_READ"))
++			break;
++
++		return msg.data32;
++	} while (0);
++
++	printk(KERN_CRIT "HSS-%i: unable to read HSS status\n", port->id);
++	BUG();
++}
++
++static void hss_config_start_chan(struct port *port)
++{
++	struct msg msg;
++
++	port->chan_last_tx = 0;
++	port->chan_last_rx = 0;
++
++	do {
++		memset(&msg, 0, sizeof(msg));
++		msg.cmd = CHAN_RX_BUF_ADDR_WRITE;
++		msg.hss_port = port->id;
++		msg.data32 = port->chan_rx_buf_phys;
++		if (npe_send_message(npe, &msg, "CHAN_RX_BUF_ADDR_WRITE"))
++			break;
++
++		memset(&msg, 0, sizeof(msg));
++		msg.cmd = CHAN_TX_BUF_ADDR_WRITE;
++		msg.hss_port = port->id;
++		msg.data32 = port->chan_tx_pointers_phys;
++		if (npe_send_message(npe, &msg, "CHAN_TX_BUF_ADDR_WRITE"))
++			break;
++
++		memset(&msg, 0, sizeof(msg));
++		msg.cmd = CHAN_FLOW_ENABLE;
++		msg.hss_port = port->id;
++		if (npe_send_message(npe, &msg, "CHAN_FLOW_ENABLE"))
++			break;
++		port->chan_started = 1;
++		return;
++	} while (0);
++
++	printk(KERN_CRIT "HSS-%i: unable to start channelized flow\n",
++	       port->id);
++	BUG();
++}
++
++static void hss_config_stop_chan(struct port *port)
++{
++	struct msg msg;
++
++	if (!port->chan_started)
++		return;
++
++	memset(&msg, 0, sizeof(msg));
++	msg.cmd = CHAN_FLOW_DISABLE;
++	msg.hss_port = port->id;
++	if (npe_send_message(npe, &msg, "CHAN_FLOW_DISABLE")) {
++		printk(KERN_CRIT "HSS-%i: unable to stop channelized flow\n",
++		       port->id);
++		BUG();
++	}
++	hss_config_get_status(port); /* make sure it's halted */
++	port->chan_started = 0;
++}
++
++static int hss_config_load_firmware(struct port *port)
++{
++	struct msg msg;
++
++	if (port->initialized)
++		return 0;
++
++	if (!npe_running(npe)) {
++		int err;
++		if ((err = npe_load_firmware(npe, "NPE-A-HSS",
++					     port->dev)))
++			return err;
++	}
++
++	do {
++		/* HSS main configuration */
++		hss_config_set_line(port);
++
++		hss_config_set_frame(port);
++
++		/* Channelized operation settings */
++		memset(&msg, 0, sizeof(msg));
++		msg.cmd = CHAN_TX_BLK_CFG_WRITE;
++		msg.hss_port = port->id;
++		msg.data8b = (CHAN_TX_LIST_FRAMES & ~7) / 2;
++		msg.data8a = msg.data8b / 4;
++		msg.data8d = CHAN_TX_LIST_FRAMES - msg.data8b;
++		msg.data8c = msg.data8d / 4;
++		if (npe_send_message(npe, &msg, "CHAN_TX_BLK_CFG_WRITE"))
++			break;
++
++		memset(&msg, 0, sizeof(msg));
++		msg.cmd = CHAN_RX_BUF_CFG_WRITE;
++		msg.hss_port = port->id;
++		msg.data8a = CHAN_RX_TRIGGER / 8;
++		msg.data8b = CHAN_RX_FRAMES;
++		if (npe_send_message(npe, &msg, "CHAN_RX_BUF_CFG_WRITE"))
++			break;
++
++		memset(&msg, 0, sizeof(msg));
++		msg.cmd = CHAN_TX_BUF_SIZE_WRITE;
++		msg.hss_port = port->id;
++		msg.data8a = CHAN_TX_LISTS;
++		if (npe_send_message(npe, &msg, "CHAN_TX_BUF_SIZE_WRITE"))
++			break;
++
++		port->initialized = 1;
++		return 0;
++	} while (0);
++
++	printk(KERN_CRIT "HSS-%i: unable to start HSS operation\n", port->id);
++	BUG();
++}
++
++void hss_chan_irq(void *pdev)
++{
++	struct port *port = pdev;
++
++	qmgr_disable_irq(queue_ids[port->id].chan);
++
++	tasklet_hi_schedule(&port->task);
++}
++
++
++int hss_prepare_chan(struct port *port)
++{
++	int err, i, j;
++	u32 *temp;
++	u32 temp2;
++	u8 *temp3;
++
++	if (port->initialized)
++		return 0;
++
++	if ((err = hss_config_load_firmware(port)))
++		return err;
++
++	if ((err = qmgr_request_queue(queue_ids[port->id].chan,
++				      CHAN_QUEUE_LEN, 0, 0, "%s:hss", "hss")))
++		return err;
++
++	port->chan_tx_buf = dma_alloc_coherent(port->dev, chan_tx_buf_len(port), &port->chan_tx_buf_phys, GFP_DMA);
++	memset(port->chan_tx_buf, 0, chan_tx_buf_len(port));
++
++	port->chan_tx_pointers = dma_alloc_coherent(port->dev, chan_tx_buf_len(port) / CHAN_TX_LIST_FRAMES * 4, &port->chan_tx_pointers_phys, GFP_DMA);
++
++	temp3 = port->chan_tx_buf;
++	for (i = 0; i < CHAN_TX_LISTS; i++) {
++		for (j = 0; j < 8; j++) {
++			port->tx_lists[i][j] = temp3;
++			temp3 += CHAN_TX_LIST_FRAMES * 4;
++		}
++	}
++
++	temp = port->chan_tx_pointers;
++	temp2 = port->chan_tx_buf_phys;
++	for (i = 0; i < CHAN_TX_LISTS; i++)
++	{
++		for (j = 0; j < 32; j++)
++		{
++			*temp = temp2;
++			temp2 += CHAN_TX_LIST_FRAMES;
++			temp++;
++		}
++	}
++
++	port->chan_rx_buf = dma_alloc_coherent(port->dev, chan_rx_buf_len(port), &port->chan_rx_buf_phys, GFP_DMA);
++
++	for (i = 0; i < 8; i++) {
++		temp3 = port->chan_rx_buf + (i * 4 * 128);
++		for (j = 0; j < 8; j++) {
++			port->rx_frames[i][j] = temp3;
++			temp3 += CHAN_RX_TRIGGER;
++		}
++	}
++
++	qmgr_set_irq(queue_ids[port->id].chan, QUEUE_IRQ_SRC_NOT_EMPTY,
++		     hss_chan_irq, port);
++
++	return 0;
++
++}
++
++int hss_tx_start(struct hss_device *hdev)
++{
++	unsigned long flags;
++	struct port *port = hdev->port;
++
++	hdev->tx_loc = 0;
++	hdev->tx_frame = 0;
++
++	set_bit((1 << hdev->id), &port->chan_tx_bitmap);
++
++	if (!port->chan_started)
++	{
++		qmgr_enable_irq(queue_ids[port->id].chan);
++		spin_lock_irqsave(&npe_lock, flags);
++		hss_config_start_chan(port);
++		spin_unlock_irqrestore(&npe_lock, flags);
++		hss_chan_irq(port);
++	}
++
++	return 0;
++}
++EXPORT_SYMBOL(hss_tx_start);
++
++int hss_rx_start(struct hss_device *hdev)
++{
++	unsigned long flags;
++	struct port *port = hdev->port;
++
++	hdev->rx_loc = 0;
++	hdev->rx_frame = 0;
++
++	set_bit((1 << hdev->id), &port->chan_rx_bitmap);
++
++	if (!port->chan_started)
++	{
++		qmgr_enable_irq(queue_ids[port->id].chan);
++		spin_lock_irqsave(&npe_lock, flags);
++		hss_config_start_chan(port);
++		spin_unlock_irqrestore(&npe_lock, flags);
++		hss_chan_irq(port);
++	}
++
++	return 0;
++}
++EXPORT_SYMBOL(hss_rx_start);
++
++int hss_tx_stop(struct hss_device *hdev)
++{
++	struct port *port = hdev->port;
++
++	clear_bit((1 << hdev->id), &port->chan_tx_bitmap);
++
++	return 0;
++}
++EXPORT_SYMBOL(hss_tx_stop);
++
++int hss_rx_stop(struct hss_device *hdev)
++{
++	struct port *port = hdev->port;
++
++	clear_bit((1 << hdev->id), &port->chan_rx_bitmap);
++
++	return 0;
++}
++EXPORT_SYMBOL(hss_rx_stop);
++
++int hss_chan_open(struct hss_device *hdev)
++{
++	struct port *port = hdev->port;
++	int i, err = 0;
++
++	if (port->chan_open)
++		return 0;
++
++	if (port->mode == MODE_HDLC) {
++		err = -ENOSYS;
++		goto out;
++	}
++
++	if (port->mode == MODE_G704 && port->channels[0] == hdev->id) {
++		err = -EBUSY; /* channel #0 is used for G.704 signaling */
++		goto out;
++	}
++
++	for (i = MAX_CHANNELS; i > port->frame_size / 8; i--)
++		if (port->channels[i - 1] == hdev->id) {
++			err = -ECHRNG; /* frame too short */
++			goto out;
++		}
++
++	hdev->rx_loc = hdev->tx_loc = 0;
++	hdev->rx_frame = hdev->tx_frame = 0;
++
++	//clear_bit((1 << hdev->id), &port->chan_rx_bitmap);
++	//clear_bit((1 << hdev->id), &port->chan_tx_bitmap);
++
++	if (!port->initialized) {
++		hss_prepare_chan(port);
++
++		hss_config_stop_chan(port);
++		hdev->open_count++;
++		port->chan_open_count++;
++
++		hss_config_set_lut(port);
++		hss_config_load(port);
++
++	}
++	port->chan_open = 1;
++
++out:
++	return err;
++}
++EXPORT_SYMBOL(hss_chan_open);
++
++int hss_chan_close(struct hss_device *hdev)
++{
++	return 0;
++}
++EXPORT_SYMBOL(hss_chan_close);
++
++void hss_chan_read(unsigned long data)
++{
++	struct port *port = (void *)data;
++	struct hss_device *hdev;
++	u8 *hw_buf, *save_buf;
++	u8 *buf;
++	u32 v;
++  unsigned int tx_list, rx_frame;
++	int i, j, channel;
++	u8 more_work = 0;
++
++/*
++	My Data in the hardware buffer is scattered by channels into 4 trunks
++	as follows for rx
++
++					channel 0					channel 1					channel 2					channel 3
++Trunk 1	=	0			-> 	127			128		->	255			256		->	383			384		->	512
++Trunk 2 =	513		->	639			640		->	768			769		->	895			896		->	1023
++Trunk 3 =	1024	->	1151		1152	->	1207		1208	->	1407		1408	->	1535
++Trunk 4 = 1535	->	1663		1664	->	1791		1792	->	1920		1921	->	2047
++
++	I will get CHAN_RX_TRIGGER worth of bytes out of each channel on each trunk
++	with each IRQ
++
++	For TX Data, it is split into 8 lists with each list containing 16 bytes per
++	channel
++
++Trunk 1 = 0		->	16				17		->	32			33		->	48			49		->	64
++Trunk 2 = 65	->	80				81		->	96			97		->	112			113		->	128
++Trunk	3	=	129	->	144				145		->	160			161		->	176			177		->	192
++Trunk	4	=	193	->	208				209		->	224			225		->	240			241		->	256
++
++*/
++
++
++	while ((v = qmgr_get_entry(queue_ids[port->id].chan)))
++	{
++		tx_list = (v >> 8) & 0xFF;
++		rx_frame = v & 0xFF;
++
++		if (tx_list == 7)
++			tx_list = 0;
++		else
++			tx_list++;
++		for (channel = 0; channel < 8; channel++) {
++
++			hdev = port->chan_devices[channel];
++			if (!hdev)
++				continue;
++
++			if (test_bit(1 << channel, &port->chan_tx_bitmap)) {
++				buf = (u8 *)hdev->tx_buf + hdev->tx_loc;
++#if 0
++				hw_buf = (u8 *)port->chan_tx_buf;
++				hw_buf += (tx_list * CHAN_TX_LIST_FRAMES * 32);
++				hw_buf += (4 * CHAN_TX_LIST_FRAMES * channel);
++				save_buf = hw_buf;
++#else
++				save_buf = port->tx_lists[tx_list][channel];
++#endif
++				for (i = 0; i < CHAN_TX_LIST_FRAMES; i++) {
++					hw_buf = save_buf + i;
++					for (j = 0; j < 4; j++) {
++						*hw_buf = *(buf++);
++						hw_buf += CHAN_TX_LIST_FRAMES;
++					}
++
++					hdev->tx_loc += 4;
++					hdev->tx_frame++;
++					if (hdev->tx_loc >= hdev->tx_buffer_size) {
++						hdev->tx_loc = 0;
++						buf = (u8 *)hdev->tx_buf;
++					}
++				}
++			} else {
++#if 0
++				hw_buf = (u8 *)port->chan_tx_buf;
++				hw_buf += (tx_list * CHAN_TX_LIST_FRAMES * 32);
++				hw_buf += (4 * CHAN_TX_LIST_FRAMES * channel);
++#else
++				hw_buf = port->tx_lists[tx_list][channel];
++#endif
++				memset(hw_buf, 0, 64);
++			}
++
++			if (hdev->tx_frame >= hdev->tx_period_size && test_bit(1 << channel, &port->chan_tx_bitmap))
++			{
++				hdev->tx_frame %= hdev->tx_period_size;
++				if (hdev->tx_callback)
++					hdev->tx_callback(hdev->tx_data);
++				more_work = 1;
++			}
++
++			if (test_bit(1 << channel, &port->chan_rx_bitmap)) {
++				buf = (u8 *)hdev->rx_buf + hdev->rx_loc;
++#if 0
++				hw_buf = (u8 *)port->chan_rx_buf;
++				hw_buf += (4 * CHAN_RX_FRAMES * channel);
++				hw_buf += rx_frame;
++				save_buf = hw_buf;
++#else
++				save_buf = port->rx_frames[channel][rx_frame >> 4];
++#endif
++				for (i = 0; i < CHAN_RX_TRIGGER; i++) {
++					hw_buf = save_buf + i;
++					for (j = 0; j < 4; j++) {
++						*(buf++) = *hw_buf;
++						hw_buf += CHAN_RX_FRAMES;
++					}
++					hdev->rx_loc += 4;
++					hdev->rx_frame++;
++					if (hdev->rx_loc >= hdev->rx_buffer_size) {
++						hdev->rx_loc = 0;
++						buf = (u8 *)hdev->rx_buf;
++					}
++				}
++			}
++
++			if (hdev->rx_frame >= hdev->rx_period_size && test_bit(1 << channel, &port->chan_rx_bitmap))
++			{
++				hdev->rx_frame %= hdev->rx_period_size;
++				if (hdev->rx_callback)
++					hdev->rx_callback(hdev->rx_data);
++				more_work = 1;
++			}
++		}
++#if 0
++		if (more_work)
++		{
++			tasklet_hi_schedule(&port->task);
++			return;
++		}
++#endif
++	}
++
++	qmgr_enable_irq(queue_ids[port->id].chan);
++
++	return;
++
++}
++
++struct hss_device *hss_chan_create(struct port *port, unsigned int channel)
++{
++	struct hss_device *chan_dev;
++	unsigned long flags;
++
++	chan_dev = kzalloc(sizeof(struct hss_device), GFP_KERNEL);
++
++	spin_lock_irqsave(&npe_lock, flags);
++
++	chan_dev->id = channel;
++	chan_dev->port = port;
++
++	port->channels[channel] = channel;
++
++	port->chan_devices[channel] = chan_dev;
++
++	spin_unlock_irqrestore(&npe_lock, flags);
++
++	return chan_dev;
++}
++
++/*****************************************************************************
++ * initialization
++ ****************************************************************************/
++
++static struct platform_device gw_avila_hss_device_0 = {
++  .name     = "ixp4xx_hss",
++  .id       = 0,
++};
++
++static struct platform_device gw_avila_hss_device_1 = {
++  .name     = "ixp4xx_hss",
++  .id       = 1,
++};
++
++static struct platform_device *gw_avila_hss_port_0;
++static struct platform_device *gw_avila_hss_port_1;
++static u64 hss_dmamask = 0xFFFFFFFF;
++
++struct hss_device *hss_init(int id, int channel)
++{
++	struct port *port = hss_port[id];
++	struct hss_device *hdev;
++	int ret;
++
++	if (!lock_init)
++	{
++		spin_lock_init(&npe_lock);
++		lock_init = 1;
++		npe = npe_request(0);
++	}
++
++	if (!port->init) {
++		if (id == 0) {
++			gw_avila_hss_port_0 = platform_device_alloc("hss-port", 0);
++
++			platform_set_drvdata(gw_avila_hss_port_0, &gw_avila_hss_device_0);
++			port->dev = &gw_avila_hss_port_0->dev;
++
++			if (!port->dev->dma_mask)
++		    port->dev->dma_mask = &hss_dmamask;
++		  if (!port->dev->coherent_dma_mask)
++	    	port->dev->coherent_dma_mask = 0xFFFFFFFF;
++
++			ret = platform_device_add(gw_avila_hss_port_0);
++
++		  if (ret)
++	  	  platform_device_put(gw_avila_hss_port_0);
++
++			tasklet_init(&port->task, hss_chan_read, (unsigned long) port);
++		}
++		else
++		{
++			gw_avila_hss_port_1 = platform_device_alloc("hss-port", 1);
++
++			platform_set_drvdata(gw_avila_hss_port_1, &gw_avila_hss_device_1);
++			port->dev = &gw_avila_hss_port_1->dev;
++
++			if (!port->dev->dma_mask)
++		    port->dev->dma_mask = &hss_dmamask;
++		  if (!port->dev->coherent_dma_mask)
++	    	port->dev->coherent_dma_mask = 0xFFFFFFFF;
++
++			ret = platform_device_add(gw_avila_hss_port_1);
++
++		  if (ret)
++	  	  platform_device_put(gw_avila_hss_port_1);
++
++			tasklet_init(&port->task, hss_chan_read, (unsigned long) port);
++		}
++
++		port->init = 1;
++		port->id = id;
++		port->clock_type = CLOCK_EXT;
++		port->clock_rate = 8192000;
++		port->frame_size = 256; /* E1 */
++		port->mode = MODE_RAW;
++		port->next_rx_frame = 0;
++		memset(port->channels, CHANNEL_UNUSED, sizeof(port->channels));
++	}
++
++	hdev = hss_chan_create(port, channel);
++
++	return hdev;
++}
++EXPORT_SYMBOL(hss_init);
++
++int hss_set_tx_callback(struct hss_device *hdev, void (*tx_callback)(void *), void *tx_data)
++{
++  BUG_ON(tx_callback == NULL);
++  hdev->tx_callback = tx_callback;
++  hdev->tx_data = tx_data;
++
++  return 0;
++}
++EXPORT_SYMBOL(hss_set_tx_callback);
++
++int hss_set_rx_callback(struct hss_device *hdev, void (*rx_callback)(void *), void *rx_data)
++{
++  BUG_ON(rx_callback == NULL);
++  hdev->rx_callback = rx_callback;
++  hdev->rx_data = rx_data;
++
++  return 0;
++}
++EXPORT_SYMBOL(hss_set_rx_callback);
++
++int hss_config_rx_dma(struct hss_device *hdev, void *buf, size_t buffer_size, size_t period_size)
++{
++	/*
++	 * Period Size and Buffer Size are in Frames which are u32
++	 * We convert the u32 *buf to u8 in order to make channel reads
++	 * and rx_loc easier
++	 */
++
++	hdev->rx_buf = (u8 *)buf;
++	hdev->rx_buffer_size = buffer_size << 2;
++	hdev->rx_period_size = period_size;
++
++	return 0;
++}
++EXPORT_SYMBOL(hss_config_rx_dma);
++
++int hss_config_tx_dma(struct hss_device *hdev, void *buf, size_t buffer_size, size_t period_size)
++{
++	/*
++	 * Period Size and Buffer Size are in Frames which are u32
++	 * We convert the u32 *buf to u8 in order to make channel reads
++	 * and rx_loc easier
++	 */
++
++	hdev->tx_buf = (u8 *)buf;
++	hdev->tx_buffer_size = buffer_size << 2;
++	hdev->tx_period_size = period_size;
++
++	return 0;
++}
++EXPORT_SYMBOL(hss_config_tx_dma);
++
++unsigned long hss_curr_offset_rx(struct hss_device *hdev)
++{
++	return hdev->rx_loc >> 2;
++}
++EXPORT_SYMBOL(hss_curr_offset_rx);
++
++unsigned long hss_curr_offset_tx(struct hss_device *hdev)
++{
++	return hdev->tx_loc >> 2;
++}
++EXPORT_SYMBOL(hss_curr_offset_tx);
++
++MODULE_AUTHOR("Chris Lang");
++MODULE_DESCRIPTION("Intel IXP4xx HSS Audio driver");
++MODULE_LICENSE("GPL v2");
+--- /dev/null
++++ b/sound/soc/gw-avila/ixp4xx_hss.h
+@@ -0,0 +1,401 @@
++/*
++ *
++ *
++ * Copyright (C) 2009 Gateworks Corporation
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of version 2 of the GNU General Public License
++ * as published by the Free Software Foundation.
++ */
++
++#include <linux/types.h>
++#include <linux/bitops.h>
++#include <linux/dma-mapping.h>
++#include <linux/dmapool.h>
++#include <linux/fs.h>
++#include <linux/io.h>
++#include <linux/kernel.h>
++#include <linux/platform_device.h>
++#include <linux/poll.h>
++#include <mach/npe.h>
++#include <mach/qmgr.h>
++#include <linux/interrupt.h>
++
++//#include <linux/hdlc.h> XXX We aren't HDLC
++
++#define DEBUG_QUEUES		0
++#define DEBUG_DESC		0
++#define DEBUG_RX		0
++#define DEBUG_TX		0
++#define DEBUG_PKT_BYTES		0
++#define DEBUG_CLOSE		0
++#define DEBUG_FRAMER		0
++
++#define DRV_NAME		"ixp4xx_hss"
++
++#define PKT_EXTRA_FLAGS		0 /* orig 1 */
++#define TX_FRAME_SYNC_OFFSET	0 /* channelized */
++#define PKT_NUM_PIPES		1 /* 1, 2 or 4 */
++#define PKT_PIPE_FIFO_SIZEW	4 /* total 4 dwords per HSS */
++
++#define RX_DESCS		512 /* also length of all RX queues */
++#define TX_DESCS		512 /* also length of all TX queues */
++
++//#define POOL_ALLOC_SIZE		(sizeof(struct desc) * (RX_DESCS + TX_DESCS))
++#define RX_SIZE			(HDLC_MAX_MRU + 4) /* NPE needs more space */
++#define MAX_CLOSE_WAIT		1000 /* microseconds */
++#define HSS_COUNT		2
++#define MIN_FRAME_SIZE		16   /* bits */
++#define MAX_FRAME_SIZE		257  /* 256 bits + framing bit */
++#define MAX_CHANNELS		(MAX_FRAME_SIZE / 8)
++#define MAX_CHAN_DEVICES	32
++#define CHANNEL_HDLC		0xFE
++#define CHANNEL_UNUSED		0xFF
++
++#define NAPI_WEIGHT		16
++#define CHAN_RX_TRIGGER		16 /* 8 RX frames = 1 ms @ E1 */
++#define CHAN_RX_FRAMES		128
++#define CHAN_RX_TRUNKS		1
++#define MAX_CHAN_RX_BAD_SYNC	(CHAN_RX_TRIGGER / 2 /* pairs */ - 3)
++
++#define CHAN_TX_LIST_FRAMES	CHAN_RX_TRIGGER /* bytes/channel per list, 16 - 48 */
++#define CHAN_TX_LISTS		8
++#define CHAN_TX_TRUNKS CHAN_RX_TRUNKS
++#define CHAN_TX_FRAMES		(CHAN_TX_LIST_FRAMES * CHAN_TX_LISTS)
++
++#define CHAN_QUEUE_LEN		32 /* minimum possible */
++
++#define chan_rx_buf_len(port)	(port->frame_size / 8 * CHAN_RX_FRAMES * CHAN_RX_TRUNKS)
++#define chan_tx_buf_len(port) (port->frame_size / 8 * CHAN_TX_FRAMES * CHAN_TX_TRUNKS)
++
++/* Queue IDs */
++#define HSS0_CHL_RXTRIG_QUEUE	12	/* orig size = 32 dwords */
++#define HSS0_PKT_RX_QUEUE	13	/* orig size = 32 dwords */
++#define HSS0_PKT_TX0_QUEUE	14	/* orig size = 16 dwords */
++#define HSS0_PKT_TX1_QUEUE	15
++#define HSS0_PKT_TX2_QUEUE	16
++#define HSS0_PKT_TX3_QUEUE	17
++#define HSS0_PKT_RXFREE0_QUEUE	18	/* orig size = 16 dwords */
++#define HSS0_PKT_RXFREE1_QUEUE	19
++#define HSS0_PKT_RXFREE2_QUEUE	20
++#define HSS0_PKT_RXFREE3_QUEUE	21
++#define HSS0_PKT_TXDONE_QUEUE	22	/* orig size = 64 dwords */
++
++#define HSS1_CHL_RXTRIG_QUEUE	10
++#define HSS1_PKT_RX_QUEUE	0
++#define HSS1_PKT_TX0_QUEUE	5
++#define HSS1_PKT_TX1_QUEUE	6
++#define HSS1_PKT_TX2_QUEUE	7
++#define HSS1_PKT_TX3_QUEUE	8
++#define HSS1_PKT_RXFREE0_QUEUE	1
++#define HSS1_PKT_RXFREE1_QUEUE	2
++#define HSS1_PKT_RXFREE2_QUEUE	3
++#define HSS1_PKT_RXFREE3_QUEUE	4
++#define HSS1_PKT_TXDONE_QUEUE	9
++
++#define NPE_PKT_MODE_HDLC		0
++#define NPE_PKT_MODE_RAW		1
++#define NPE_PKT_MODE_56KMODE		2
++#define NPE_PKT_MODE_56KENDIAN_MSB	4
++
++/* PKT_PIPE_HDLC_CFG_WRITE flags */
++#define PKT_HDLC_IDLE_ONES		0x1 /* default = flags */
++#define PKT_HDLC_CRC_32			0x2 /* default = CRC-16 */
++#define PKT_HDLC_MSB_ENDIAN		0x4 /* default = LE */
++
++
++/* hss_config, PCRs */
++/* Frame sync sampling, default = active low */
++#define PCR_FRM_SYNC_ACTIVE_HIGH	0x40000000
++#define PCR_FRM_SYNC_FALLINGEDGE	0x80000000
++#define PCR_FRM_SYNC_RISINGEDGE		0xC0000000
++
++/* Frame sync pin: input (default) or output generated off a given clk edge */
++#define PCR_FRM_SYNC_OUTPUT_FALLING	0x20000000
++#define PCR_FRM_SYNC_OUTPUT_RISING	0x30000000
++
++/* Frame and data clock sampling on edge, default = falling */
++#define PCR_FCLK_EDGE_RISING		0x08000000
++#define PCR_DCLK_EDGE_RISING		0x04000000
++
++/* Clock direction, default = input */
++#define PCR_SYNC_CLK_DIR_OUTPUT		0x02000000
++
++/* Generate/Receive frame pulses, default = enabled */
++#define PCR_FRM_PULSE_DISABLED		0x01000000
++
++ /* Data rate is full (default) or half the configured clk speed */
++#define PCR_HALF_CLK_RATE		0x00200000
++
++/* Invert data between NPE and HSS FIFOs? (default = no) */
++#define PCR_DATA_POLARITY_INVERT	0x00100000
++
++/* TX/RX endianness, default = LSB */
++#define PCR_MSB_ENDIAN			0x00080000
++
++/* Normal (default) / open drain mode (TX only) */
++#define PCR_TX_PINS_OPEN_DRAIN		0x00040000
++
++/* No framing bit transmitted and expected on RX? (default = framing bit) */
++#define PCR_SOF_NO_FBIT			0x00020000
++
++/* Drive data pins? */
++#define PCR_TX_DATA_ENABLE		0x00010000
++
++/* Voice 56k type: drive the data pins low (default), high, high Z */
++#define PCR_TX_V56K_HIGH		0x00002000
++#define PCR_TX_V56K_HIGH_IMP		0x00004000
++
++/* Unassigned type: drive the data pins low (default), high, high Z */
++#define PCR_TX_UNASS_HIGH		0x00000800
++#define PCR_TX_UNASS_HIGH_IMP		0x00001000
++
++/* T1 @ 1.544MHz only: Fbit dictated in FIFO (default) or high Z */
++#define PCR_TX_FB_HIGH_IMP		0x00000400
++
++/* 56k data endiannes - which bit unused: high (default) or low */
++#define PCR_TX_56KE_BIT_0_UNUSED	0x00000200
++
++/* 56k data transmission type: 32/8 bit data (default) or 56K data */
++#define PCR_TX_56KS_56K_DATA		0x00000100
++
++/* hss_config, cCR */
++/* Number of packetized clients, default = 1 */
++#define CCR_NPE_HFIFO_2_HDLC		0x04000000
++#define CCR_NPE_HFIFO_3_OR_4HDLC	0x08000000
++
++/* default = no loopback */
++#define CCR_LOOPBACK			0x02000000
++
++/* HSS number, default = 0 (first) */
++#define CCR_SECOND_HSS			0x01000000
++
++
++/* hss_config, clkCR: main:10, num:10, denom:12 */
++#define CLK42X_SPEED_EXP	((0x3FF << 22) | (  2 << 12) |   15) /*65 KHz*/
++
++#define CLK42X_SPEED_512KHZ	((  130 << 22) | (  2 << 12) |   15)
++#define CLK42X_SPEED_1536KHZ	((   43 << 22) | ( 18 << 12) |   47)
++#define CLK42X_SPEED_1544KHZ	((   43 << 22) | ( 33 << 12) |  192)
++#define CLK42X_SPEED_2048KHZ	((   32 << 22) | ( 34 << 12) |   63)
++#define CLK42X_SPEED_4096KHZ	((   16 << 22) | ( 34 << 12) |  127)
++#define CLK42X_SPEED_8192KHZ	((    8 << 22) | ( 34 << 12) |  255)
++
++#define CLK46X_SPEED_512KHZ	((  130 << 22) | ( 24 << 12) |  127)
++#define CLK46X_SPEED_1536KHZ	((   43 << 22) | (152 << 12) |  383)
++#define CLK46X_SPEED_1544KHZ	((   43 << 22) | ( 66 << 12) |  385)
++#define CLK46X_SPEED_2048KHZ	((   32 << 22) | (280 << 12) |  511)
++#define CLK46X_SPEED_4096KHZ	((   16 << 22) | (280 << 12) | 1023)
++#define CLK46X_SPEED_8192KHZ	((    8 << 22) | (280 << 12) | 2047)
++
++
++/* hss_config, LUT entries */
++#define TDMMAP_UNASSIGNED	0
++#define TDMMAP_HDLC		1	/* HDLC - packetized */
++#define TDMMAP_VOICE56K		2	/* Voice56K - 7-bit channelized */
++#define TDMMAP_VOICE64K		3	/* Voice64K - 8-bit channelized */
++
++/* offsets into HSS config */
++#define HSS_CONFIG_TX_PCR	0x00 /* port configuration registers */
++#define HSS_CONFIG_RX_PCR	0x04
++#define HSS_CONFIG_CORE_CR	0x08 /* loopback control, HSS# */
++#define HSS_CONFIG_CLOCK_CR	0x0C /* clock generator control */
++#define HSS_CONFIG_TX_FCR	0x10 /* frame configuration registers */
++#define HSS_CONFIG_RX_FCR	0x14
++#define HSS_CONFIG_TX_LUT	0x18 /* channel look-up tables */
++#define HSS_CONFIG_RX_LUT	0x38
++
++
++/* NPE command codes */
++/* writes the ConfigWord value to the location specified by offset */
++#define PORT_CONFIG_WRITE		0x40
++
++/* triggers the NPE to load the contents of the configuration table */
++#define PORT_CONFIG_LOAD		0x41
++
++/* triggers the NPE to return an HssErrorReadResponse message */
++#define PORT_ERROR_READ			0x42
++
++/* reset NPE internal status and enable the HssChannelized operation */
++#define CHAN_FLOW_ENABLE		0x43
++#define CHAN_FLOW_DISABLE		0x44
++#define CHAN_IDLE_PATTERN_WRITE		0x45
++#define CHAN_NUM_CHANS_WRITE		0x46
++#define CHAN_RX_BUF_ADDR_WRITE		0x47
++#define CHAN_RX_BUF_CFG_WRITE		0x48
++#define CHAN_TX_BLK_CFG_WRITE		0x49
++#define CHAN_TX_BUF_ADDR_WRITE		0x4A
++#define CHAN_TX_BUF_SIZE_WRITE		0x4B
++#define CHAN_TSLOTSWITCH_ENABLE		0x4C
++#define CHAN_TSLOTSWITCH_DISABLE	0x4D
++
++/* downloads the gainWord value for a timeslot switching channel associated
++   with bypassNum */
++#define CHAN_TSLOTSWITCH_GCT_DOWNLOAD	0x4E
++
++/* triggers the NPE to reset internal status and enable the HssPacketized
++   operation for the flow specified by pPipe */
++#define PKT_PIPE_FLOW_ENABLE		0x50
++#define PKT_PIPE_FLOW_DISABLE		0x51
++#define PKT_NUM_PIPES_WRITE		0x52
++#define PKT_PIPE_FIFO_SIZEW_WRITE	0x53
++#define PKT_PIPE_HDLC_CFG_WRITE		0x54
++#define PKT_PIPE_IDLE_PATTERN_WRITE	0x55
++#define PKT_PIPE_RX_SIZE_WRITE		0x56
++#define PKT_PIPE_MODE_WRITE		0x57
++
++/* HDLC packet status values - desc->status */
++#define ERR_SHUTDOWN		1 /* stop or shutdown occurrance */
++#define ERR_HDLC_ALIGN		2 /* HDLC alignment error */
++#define ERR_HDLC_FCS		3 /* HDLC Frame Check Sum error */
++#define ERR_RXFREE_Q_EMPTY	4 /* RX-free queue became empty while receiving
++				     this packet (if buf_len < pkt_len) */
++#define ERR_HDLC_TOO_LONG	5 /* HDLC frame size too long */
++#define ERR_HDLC_ABORT		6 /* abort sequence received */
++#define ERR_DISCONNECTING	7 /* disconnect is in progress */
++
++#define CLOCK_EXT 0
++#define CLOCK_INT 1
++
++enum mode {MODE_HDLC = 0, MODE_RAW, MODE_G704};
++enum rx_tx_bit {
++	TX_BIT = 0,
++	RX_BIT = 1
++};
++enum chan_bit {
++	CHAN_0 = (1 << 0),
++	CHAN_1 = (1 << 1),
++	CHAN_2 = (1 << 2),
++	CHAN_3 = (1 << 3),
++	CHAN_4 = (1 << 4),
++	CHAN_5 = (1 << 5),
++	CHAN_6 = (1 << 6),
++	CHAN_7 = (1 << 7),
++	CHAN_8 = (1 << 8),
++	CHAN_9 = (1 << 9),
++	CHAN_10 = (1 << 10),
++	CHAN_11 = (1 << 11),
++	CHAN_12 = (1 << 12),
++	CHAN_13 = (1 << 13),
++	CHAN_14 = (1 << 14),
++	CHAN_15 = (1 << 15)
++};
++
++enum alignment { NOT_ALIGNED = 0, EVEN_FIRST, ODD_FIRST };
++
++#ifdef __ARMEB__
++typedef struct sk_buff buffer_t;
++#define free_buffer dev_kfree_skb
++#define free_buffer_irq dev_kfree_skb_irq
++#else
++typedef void buffer_t;
++#define free_buffer kfree
++#define free_buffer_irq kfree
++#endif
++
++struct hss_device {
++	struct port *port;
++	unsigned int open_count, excl_open;
++	unsigned long tx_loc, rx_loc; /* bytes */
++	unsigned long tx_frame, rx_frame; /* Frames */
++	u8 id, chan_count;
++	u8 log_channels[MAX_CHANNELS];
++
++  u8 *rx_buf;
++  u8 *tx_buf;
++
++	size_t rx_buffer_size;
++	size_t rx_period_size;
++	size_t tx_buffer_size;
++	size_t tx_period_size;
++
++  void (*rx_callback)(void *data);
++  void *rx_data;
++  void (*tx_callback)(void *data);
++  void *tx_data;
++  void *private_data;
++};
++
++extern struct hss_device *hss_handle[32];
++extern struct port *hss_port[2];
++
++struct port {
++	unsigned char init;
++
++	struct device *dev;
++
++	struct tasklet_struct task;
++	unsigned int id;
++	unsigned long chan_rx_bitmap;
++	unsigned long chan_tx_bitmap;
++	unsigned char chan_open;
++
++	/* the following fields must be protected by npe_lock */
++	enum mode mode;
++	unsigned int clock_type, clock_rate, loopback;
++	unsigned int frame_size, frame_sync_offset;
++	unsigned int next_rx_frame;
++
++	struct hss_device *chan_devices[MAX_CHAN_DEVICES];
++	u32 chan_tx_buf_phys, chan_rx_buf_phys;
++	u32	chan_tx_pointers_phys;
++	u32 *chan_tx_pointers;
++	u8 *chan_rx_buf;
++	u8 *chan_tx_buf;
++	u8 *tx_lists[CHAN_TX_LISTS][8];
++	u8 *rx_frames[8][CHAN_TX_LISTS];
++	unsigned int chan_open_count, hdlc_open;
++	unsigned int chan_started, initialized, just_set_offset;
++	unsigned int chan_last_rx, chan_last_tx;
++
++	/* assigned channels, may be invalid with given frame length or mode */
++	u8 channels[MAX_CHANNELS];
++	int msg_count;
++};
++
++/* NPE message structure */
++struct msg {
++#ifdef __ARMEB__
++	u8 cmd, unused, hss_port, index;
++	union {
++		struct { u8 data8a, data8b, data8c, data8d; };
++		struct { u16 data16a, data16b; };
++		struct { u32 data32; };
++	};
++#else
++	u8 index, hss_port, unused, cmd;
++	union {
++		struct { u8 data8d, data8c, data8b, data8a; };
++		struct { u16 data16b, data16a; };
++		struct { u32 data32; };
++	};
++#endif
++};
++
++#define rx_desc_phys(port, n)	((port)->desc_tab_phys +		\
++				 (n) * sizeof(struct desc))
++#define rx_desc_ptr(port, n)	(&(port)->desc_tab[n])
++
++#define tx_desc_phys(port, n)	((port)->desc_tab_phys +		\
++				 ((n) + RX_DESCS) * sizeof(struct desc))
++#define tx_desc_ptr(port, n)	(&(port)->desc_tab[(n) + RX_DESCS])
++
++int hss_prepare_chan(struct port *port);
++void hss_chan_stop(struct port *port);
++
++struct hss_device *hss_init(int id, int channel);
++int hss_chan_open(struct hss_device *hdev);
++int hss_chan_close(struct hss_device *hdev);
++
++int hss_set_tx_callback(struct hss_device *hdev, void (*tx_callback)(void *), void *tx_data);
++int hss_set_rx_callback(struct hss_device *hdev, void (*rx_callback)(void *), void *rx_data);
++int hss_tx_start(struct hss_device *hdev);
++int hss_tx_stop(struct hss_device *hdev);
++int hss_rx_start(struct hss_device *hdev);
++int hss_rx_stop(struct hss_device *hdev);
++
++int hss_config_rx_dma(struct hss_device *hdev, void *buf, size_t buffer_size, size_t period_size);
++int hss_config_tx_dma(struct hss_device *hdev, void *buf, size_t buffer_size, size_t period_size);
++unsigned long hss_curr_offset_rx(struct hss_device *hdev);
++unsigned long hss_curr_offset_tx(struct hss_device *hdev);
++
diff --git a/target/linux/ixp4xx/patches-3.18/180-tw5334_support.patch b/target/linux/ixp4xx/patches-3.18/180-tw5334_support.patch
new file mode 100644
index 0000000..b56fbb7
--- /dev/null
+++ b/target/linux/ixp4xx/patches-3.18/180-tw5334_support.patch
@@ -0,0 +1,287 @@
+--- a/arch/arm/mach-ixp4xx/Kconfig
++++ b/arch/arm/mach-ixp4xx/Kconfig
+@@ -160,6 +160,14 @@ config ARCH_PRPMC1100
+ 	  PrPCM1100 Processor Mezanine Module. For more information on
+ 	  this platform, see <file:Documentation/arm/IXP4xx>.
+ 
++config MACH_TW5334
++	bool "Titan Wireless TW-533-4"
++	select PCI
++	help
++	  Say 'Y' here if you want your kernel to support the Titan
++	  Wireless TW533-4. For more information on this platform,
++	  see http://openwrt.org
++
+ config MACH_NAS100D
+ 	bool
+ 	prompt "NAS100D"
+--- a/arch/arm/mach-ixp4xx/Makefile
++++ b/arch/arm/mach-ixp4xx/Makefile
+@@ -24,6 +24,7 @@ obj-pci-$(CONFIG_MACH_SIDEWINDER)	+= sid
+ obj-pci-$(CONFIG_MACH_COMPEXWP18)	+= ixdp425-pci.o
+ obj-pci-$(CONFIG_MACH_WRT300NV2)		+= wrt300nv2-pci.o
+ obj-pci-$(CONFIG_MACH_AP1000)		+= ixdp425-pci.o
++obj-pci-$(CONFIG_MACH_TW5334)		+= tw5334-pci.o
+ 
+ obj-y	+= common.o
+ 
+@@ -49,6 +50,7 @@ obj-$(CONFIG_MACH_SIDEWINDER)	+= sidewin
+ obj-$(CONFIG_MACH_COMPEXWP18)	+= compex42x-setup.o
+ obj-$(CONFIG_MACH_WRT300NV2)	+= wrt300nv2-setup.o
+ obj-$(CONFIG_MACH_AP1000)	+= ap1000-setup.o
++obj-$(CONFIG_MACH_TW5334)	+= tw5334-setup.o
+ 
+ obj-$(CONFIG_PCI)		+= $(obj-pci-$(CONFIG_PCI)) common-pci.o
+ obj-$(CONFIG_IXP4XX_QMGR)	+= ixp4xx_qmgr.o
+--- a/arch/arm/mach-ixp4xx/include/mach/uncompress.h
++++ b/arch/arm/mach-ixp4xx/include/mach/uncompress.h
+@@ -44,7 +44,7 @@ static __inline__ void __arch_decomp_set
+ 	    machine_is_gateway7001() || machine_is_wg302v2() ||
+ 	    machine_is_devixp() || machine_is_miccpt() || machine_is_mic256() ||
+ 	    machine_is_pronghorn() || machine_is_pronghorn_metro() ||
+-	    machine_is_wrt300nv2())
++	    machine_is_wrt300nv2() || machine_is_tw5334())
+ 		uart_base = (volatile u32*) IXP4XX_UART2_BASE_PHYS;
+ 	else
+ 		uart_base = (volatile u32*) IXP4XX_UART1_BASE_PHYS;
+--- /dev/null
++++ b/arch/arm/mach-ixp4xx/tw5334-pci.c
+@@ -0,0 +1,68 @@
++/*
++ * arch/arch/mach-ixp4xx/tw5334-pci.c
++ *
++ * PCI setup routines for the Titan Wireless TW-533-4
++ *
++ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
++ *
++ * based on coyote-pci.c:
++ *	Copyright (C) 2002 Jungo Software Technologies.
++ *	Copyright (C) 2003 MontaVista Softwrae, Inc.
++ *
++ * Maintainer: Imre Kaloz <kaloz@openwrt.org>
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ *
++ */
++
++#include <linux/kernel.h>
++#include <linux/pci.h>
++#include <linux/init.h>
++#include <linux/irq.h>
++
++#include <asm/mach-types.h>
++#include <mach/hardware.h>
++
++#include <asm/mach/pci.h>
++
++void __init tw5334_pci_preinit(void)
++{
++	irq_set_irq_type(IRQ_IXP4XX_GPIO6, IRQ_TYPE_LEVEL_LOW);
++	irq_set_irq_type(IRQ_IXP4XX_GPIO2, IRQ_TYPE_LEVEL_LOW);
++	irq_set_irq_type(IRQ_IXP4XX_GPIO1, IRQ_TYPE_LEVEL_LOW);
++	irq_set_irq_type(IRQ_IXP4XX_GPIO0, IRQ_TYPE_LEVEL_LOW);
++
++	ixp4xx_pci_preinit();
++}
++
++static int __init tw5334_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
++{
++	if (slot == 12)
++		return IRQ_IXP4XX_GPIO6;
++	else if (slot == 13)
++		return IRQ_IXP4XX_GPIO2;
++	else if (slot == 14)
++		return IRQ_IXP4XX_GPIO1;
++	else if (slot == 15)
++		return IRQ_IXP4XX_GPIO0;
++	else return -1;
++}
++
++struct hw_pci tw5334_pci __initdata = {
++	.nr_controllers = 1,
++	.preinit =        tw5334_pci_preinit,
++	.ops =            &ixp4xx_ops,
++	.setup =          ixp4xx_setup,
++	.map_irq =        tw5334_map_irq,
++};
++
++int __init tw5334_pci_init(void)
++{
++	if (machine_is_tw5334())
++		pci_common_init(&tw5334_pci);
++	return 0;
++}
++
++subsys_initcall(tw5334_pci_init);
+--- /dev/null
++++ b/arch/arm/mach-ixp4xx/tw5334-setup.c
+@@ -0,0 +1,167 @@
++/*
++ * arch/arm/mach-ixp4xx/tw5334-setup.c
++ *
++ * Board setup for the Titan Wireless TW-533-4
++ *
++ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
++ *
++ * based on coyote-setup.c:
++ *      Copyright (C) 2003-2005 MontaVista Software, Inc.
++ *
++ * Author: Imre Kaloz <Kaloz@openwrt.org>
++ */
++
++#include <linux/if_ether.h>
++#include <linux/kernel.h>
++#include <linux/init.h>
++#include <linux/device.h>
++#include <linux/serial.h>
++#include <linux/tty.h>
++#include <linux/serial_8250.h>
++#include <linux/slab.h>
++
++#include <asm/types.h>
++#include <asm/setup.h>
++#include <asm/memory.h>
++#include <mach/hardware.h>
++#include <asm/irq.h>
++#include <asm/mach-types.h>
++#include <asm/mach/arch.h>
++#include <asm/mach/flash.h>
++
++static struct flash_platform_data tw5334_flash_data = {
++	.map_name	= "cfi_probe",
++	.width		= 2,
++};
++
++static struct resource tw5334_flash_resource = {
++	.flags		= IORESOURCE_MEM,
++};
++
++static struct platform_device tw5334_flash = {
++	.name		= "IXP4XX-Flash",
++	.id		= 0,
++	.dev		= {
++		.platform_data = &tw5334_flash_data,
++	},
++	.num_resources	= 1,
++	.resource	= &tw5334_flash_resource,
++};
++
++static struct resource tw5334_uart_resource = {
++	.start	= IXP4XX_UART2_BASE_PHYS,
++	.end	= IXP4XX_UART2_BASE_PHYS + 0x0fff,
++	.flags	= IORESOURCE_MEM,
++};
++
++static struct plat_serial8250_port tw5334_uart_data[] = {
++	{
++		.mapbase	= IXP4XX_UART2_BASE_PHYS,
++		.membase	= (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
++		.irq		= IRQ_IXP4XX_UART2,
++		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
++		.iotype		= UPIO_MEM,
++		.regshift	= 2,
++		.uartclk	= IXP4XX_UART_XTAL,
++	},
++	{ },
++};
++
++static struct platform_device tw5334_uart = {
++	.name		= "serial8250",
++	.id		= PLAT8250_DEV_PLATFORM,
++	.dev			= {
++		.platform_data	= tw5334_uart_data,
++	},
++	.num_resources	= 1,
++	.resource	= &tw5334_uart_resource,
++};
++
++/* Built-in 10/100 Ethernet MAC interfaces */
++static struct eth_plat_info tw5334_plat_eth[] = {
++        {
++                .phy            = 0,
++                .rxq            = 3,
++		.txreadyq	= 20,
++        }, {
++                .phy            = 1,
++                .rxq            = 4,
++		.txreadyq	= 21,
++	}
++};
++
++static struct platform_device tw5334_eth[] = {
++        {
++                .name                   = "ixp4xx_eth",
++                .id                     = IXP4XX_ETH_NPEB,
++                .dev.platform_data      = tw5334_plat_eth,
++		.dev.coherent_dma_mask	= DMA_BIT_MASK(32),
++        }, {
++                .name                   = "ixp4xx_eth",
++                .id                     = IXP4XX_ETH_NPEC,
++                .dev.platform_data      = tw5334_plat_eth + 1,
++		.dev.coherent_dma_mask	= DMA_BIT_MASK(32),
++	}
++};
++
++static struct platform_device *tw5334_devices[] __initdata = {
++	&tw5334_flash,
++	&tw5334_uart,
++	&tw5334_eth[0],
++	&tw5334_eth[1],
++};
++
++static void __init tw5334_init(void)
++{
++	uint8_t __iomem *f;
++	int i;
++
++	ixp4xx_sys_init();
++
++	tw5334_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
++	tw5334_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + SZ_32M - 1;
++
++	*IXP4XX_EXP_CS0 |= IXP4XX_FLASH_WRITABLE;
++	*IXP4XX_EXP_CS1 = *IXP4XX_EXP_CS0;
++
++	platform_add_devices(tw5334_devices, ARRAY_SIZE(tw5334_devices));
++
++	/*
++	 * Map in a portion of the flash and read the MAC addresses.
++	 * Since it is stored in BE in the flash itself, we need to
++	 * byteswap it if we're in LE mode.
++	 */
++	f = ioremap(IXP4XX_EXP_BUS_BASE(0), 0x1000000);
++	if (f) {
++		for (i = 0; i < 6; i++) {
++#ifdef __ARMEB__
++			tw5334_plat_eth[0].hwaddr[i] = readb(f + 0xFC0422 + i);
++			tw5334_plat_eth[1].hwaddr[i] = readb(f + 0xFC043B + i);
++#else
++			tw5334_plat_eth[0].hwaddr[i] = readb(f + 0xFC0422 + (i^3));
++			tw5334_plat_eth[1].hwaddr[i] = readb(f + 0xFC043B + (i^3));
++#endif
++		}
++		iounmap(f);
++	}
++
++	printk(KERN_INFO "TW-533-4: Using MAC address %pM for port 0\n",
++		tw5334_plat_eth[0].hwaddr);
++	printk(KERN_INFO "TW-533-4: Using MAC address %pM for port 1\n",
++		tw5334_plat_eth[1].hwaddr);
++}
++
++#ifdef CONFIG_MACH_TW5334
++MACHINE_START(TW5334, "Titan Wireless TW-533-4")
++	/* Maintainer: Imre Kaloz <kaloz@openwrt.org> */
++	.map_io		= ixp4xx_map_io,
++	.init_irq	= ixp4xx_init_irq,
++	.init_time	= ixp4xx_timer_init,
++	.atag_offset	= 0x0100,
++	.init_machine	= tw5334_init,
++#if defined(CONFIG_PCI)
++	.dma_zone_size	= SZ_64M,
++#endif
++	.restart	= ixp4xx_restart,
++MACHINE_END
++#endif
diff --git a/target/linux/ixp4xx/patches-3.18/185-mi424wr_support.patch b/target/linux/ixp4xx/patches-3.18/185-mi424wr_support.patch
new file mode 100644
index 0000000..81713b3
--- /dev/null
+++ b/target/linux/ixp4xx/patches-3.18/185-mi424wr_support.patch
@@ -0,0 +1,507 @@
+--- a/arch/arm/configs/ixp4xx_defconfig
++++ b/arch/arm/configs/ixp4xx_defconfig
+@@ -26,6 +26,7 @@ CONFIG_MACH_NAS100D=y
+ CONFIG_MACH_DSMG600=y
+ CONFIG_MACH_FSG=y
+ CONFIG_MACH_GTWX5715=y
++CONFIG_MACH_MI424WR=y
+ CONFIG_IXP4XX_QMGR=y
+ CONFIG_IXP4XX_NPE=y
+ # CONFIG_ARM_THUMB is not set
+--- a/arch/arm/mach-ixp4xx/Kconfig
++++ b/arch/arm/mach-ixp4xx/Kconfig
+@@ -258,6 +258,13 @@ config MACH_MIC256
+ 	  Say 'Y' here if you want your kernel to support the MIC256
+ 	  board from OMICRON electronics GmbH.
+ 
++config MACH_MI424WR
++	bool "Actiontec MI424WR"
++	depends on ARCH_IXP4XX
++	select PCI
++	help
++		Add support for the Actiontec MI424-WR.
++
+ comment "IXP4xx Options"
+ 
+ config IXP4XX_INDIRECT_PCI
+--- a/arch/arm/mach-ixp4xx/Makefile
++++ b/arch/arm/mach-ixp4xx/Makefile
+@@ -25,6 +25,7 @@ obj-pci-$(CONFIG_MACH_COMPEXWP18)	+= ixd
+ obj-pci-$(CONFIG_MACH_WRT300NV2)		+= wrt300nv2-pci.o
+ obj-pci-$(CONFIG_MACH_AP1000)		+= ixdp425-pci.o
+ obj-pci-$(CONFIG_MACH_TW5334)		+= tw5334-pci.o
++obj-pci-$(CONFIG_MACH_MI424WR)		+= mi424wr-pci.o
+ 
+ obj-y	+= common.o
+ 
+@@ -51,6 +52,7 @@ obj-$(CONFIG_MACH_COMPEXWP18)	+= compex4
+ obj-$(CONFIG_MACH_WRT300NV2)	+= wrt300nv2-setup.o
+ obj-$(CONFIG_MACH_AP1000)	+= ap1000-setup.o
+ obj-$(CONFIG_MACH_TW5334)	+= tw5334-setup.o
++obj-$(CONFIG_MACH_MI424WR)	+= mi424wr-setup.o
+ 
+ obj-$(CONFIG_PCI)		+= $(obj-pci-$(CONFIG_PCI)) common-pci.o
+ obj-$(CONFIG_IXP4XX_QMGR)	+= ixp4xx_qmgr.o
+--- /dev/null
++++ b/arch/arm/mach-ixp4xx/mi424wr-pci.c
+@@ -0,0 +1,70 @@
++/*
++ * arch/arm/mach-ixp4xx/mi424wr-pci.c
++ *
++ * Actiontec MI424WR board-level PCI initialization
++ *
++ * Copyright (C) 2008 Jose Vasconcellos
++ *
++ * Maintainer: Jose Vasconcellos <jvasco@verizon.net>
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ *
++ */
++
++#include <linux/kernel.h>
++#include <linux/pci.h>
++#include <linux/init.h>
++#include <linux/irq.h>
++
++#include <asm/mach-types.h>
++#include <asm/mach/pci.h>
++
++/* PCI controller GPIO to IRQ pin mappings
++ * This information was obtained from Actiontec's GPL release.
++ *
++ *		INTA		INTB
++ * SLOT 13	8		6
++ * SLOT 14	7		8
++ * SLOT 15	6		7
++ */
++
++void __init mi424wr_pci_preinit(void)
++{
++	irq_set_irq_type(IRQ_IXP4XX_GPIO6, IRQ_TYPE_LEVEL_LOW);
++	irq_set_irq_type(IRQ_IXP4XX_GPIO7, IRQ_TYPE_LEVEL_LOW);
++	irq_set_irq_type(IRQ_IXP4XX_GPIO8, IRQ_TYPE_LEVEL_LOW);
++
++	ixp4xx_pci_preinit();
++}
++
++static int __init mi424wr_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
++{
++	if (slot == 13)
++		return IRQ_IXP4XX_GPIO8;
++	if (slot == 14)
++		return IRQ_IXP4XX_GPIO7;
++	if (slot == 15)
++		return IRQ_IXP4XX_GPIO6;
++
++	return -1;
++}
++
++struct hw_pci mi424wr_pci __initdata = {
++	.nr_controllers = 1,
++	.preinit	= mi424wr_pci_preinit,
++	.ops		= &ixp4xx_ops,
++	.setup		= ixp4xx_setup,
++	.map_irq	= mi424wr_map_irq,
++};
++
++int __init mi424wr_pci_init(void)
++{
++	if (machine_is_mi424wr())
++		pci_common_init(&mi424wr_pci);
++	return 0;
++}
++
++subsys_initcall(mi424wr_pci_init);
++
+--- /dev/null
++++ b/arch/arm/mach-ixp4xx/mi424wr-setup.c
+@@ -0,0 +1,387 @@
++/*
++ * arch/arm/mach-ixp4xx/mi424wr-setup.c
++ *
++ * Actiontec MI424-WR board setup
++ * Copyright (c) 2008 Jose Vasconcellos
++ *
++ * Based on Gemtek GTWX5715 by
++ * Copyright (C) 2004 George T. Joseph
++ * Derived from Coyote
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * as published by the Free Software Foundation; either version 2
++ * of the License, or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
++ *
++ */
++
++#include <linux/init.h>
++#include <linux/device.h>
++#include <linux/serial.h>
++#include <linux/serial_8250.h>
++#include <linux/types.h>
++#include <linux/memory.h>
++#include <linux/leds.h>
++#include <linux/spi/spi_gpio_old.h>
++#include <linux/dma-mapping.h>
++
++#include <asm/setup.h>
++#include <asm/system_info.h>
++#include <asm/irq.h>
++#include <asm/io.h>
++#include <asm/mach-types.h>
++#include <asm/mach/arch.h>
++#include <asm/mach/flash.h>
++
++/*
++ * GPIO 2,3,4 and 9 are hard wired to the Micrel/Kendin KS8995M Switch
++ * and operate as an SPI type interface.  The details of the interface
++ * are available on Kendin/Micrel's web site.
++ */
++
++#define MI424WR_KSSPI_SELECT		9
++#define MI424WR_KSSPI_TXD		4
++#define MI424WR_KSSPI_CLOCK		2
++#define MI424WR_KSSPI_RXD		3
++
++/*
++ * The "reset" button is wired to GPIO 10.
++ * The GPIO is brought "low" when the button is pushed.
++ */
++
++#define MI424WR_BUTTON_GPIO	10
++#define MI424WR_BUTTON_IRQ	IRQ_IXP4XX_GPIO10
++
++#define MI424WR_MOCA_WAN_LED	11
++
++/* Latch on CS1 - taken from Actiontec's 2.4 source code
++ * 
++ * default latch value
++ * 0  - power alarm led (red)           0 (off)
++ * 1  - power led (green)               0 (off)
++ * 2  - wireless led    (green)         1 (off)
++ * 3  - no internet led (red)           0 (off)
++ * 4  - internet ok led (green)         0 (off)
++ * 5  - moca LAN                        0 (off)
++ * 6  - WAN alarm led (red)		0 (off)
++ * 7  - PCI reset                       1 (not reset)
++ * 8  - IP phone 1 led (green)          1 (off)
++ * 9  - IP phone 2 led (green)          1 (off)
++ * 10 - VOIP ready led (green)          1 (off)
++ * 11 - PSTN relay 1 control            0 (PSTN)
++ * 12 - PSTN relay 1 control            0 (PSTN)
++ * 13 - N/A
++ * 14 - N/A
++ * 15 - N/A
++ */
++
++#define MI424WR_LATCH_MASK              0x04
++#define MI424WR_LATCH_DEFAULT           0x1f86
++
++#define MI424WR_LATCH_ALARM_LED         0x00
++#define MI424WR_LATCH_POWER_LED         0x01
++#define MI424WR_LATCH_WIRELESS_LED      0x02
++#define MI424WR_LATCH_INET_DOWN_LED     0x03
++#define MI424WR_LATCH_INET_OK_LED       0x04
++#define MI424WR_LATCH_MOCA_LAN_LED      0x05
++#define MI424WR_LATCH_WAN_ALARM_LED     0x06
++#define MI424WR_LATCH_PCI_RESET         0x07
++#define MI424WR_LATCH_PHONE1_LED        0x08
++#define MI424WR_LATCH_PHONE2_LED        0x09
++#define MI424WR_LATCH_VOIP_LED          0x10
++#define MI424WR_LATCH_PSTN_RELAY1       0x11
++#define MI424WR_LATCH_PSTN_RELAY2       0x12
++
++/* initialize CS1 to default timings, Intel style, 16-bit bus */
++#define MI424WR_CS1_CONFIG	0x80000002
++
++/* Define both UARTs but they are not easily accessible.
++ */
++
++static struct resource mi424wr_uart_resources[] = {
++	{
++		.start	= IXP4XX_UART1_BASE_PHYS,
++		.end	= IXP4XX_UART1_BASE_PHYS + 0x0fff,
++		.flags	= IORESOURCE_MEM,
++	},
++	{
++		.start	= IXP4XX_UART2_BASE_PHYS,
++		.end	= IXP4XX_UART2_BASE_PHYS + 0x0fff,
++		.flags	= IORESOURCE_MEM,
++	}
++};
++
++
++static struct plat_serial8250_port mi424wr_uart_platform_data[] = {
++	{
++		.mapbase	= IXP4XX_UART1_BASE_PHYS,
++		.membase	= (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET,
++		.irq		= IRQ_IXP4XX_UART1,
++		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
++		.iotype		= UPIO_MEM,
++		.regshift	= 2,
++		.uartclk	= IXP4XX_UART_XTAL,
++	},
++	{
++		.mapbase	= IXP4XX_UART2_BASE_PHYS,
++		.membase	= (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
++		.irq		= IRQ_IXP4XX_UART2,
++		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
++		.iotype		= UPIO_MEM,
++		.regshift	= 2,
++		.uartclk	= IXP4XX_UART_XTAL,
++	},
++	{ },
++};
++
++static struct platform_device mi424wr_uart_device = {
++	.name		= "serial8250",
++	.id		= PLAT8250_DEV_PLATFORM,
++	.dev.platform_data	= mi424wr_uart_platform_data,
++	.num_resources	= ARRAY_SIZE(mi424wr_uart_resources),
++	.resource	= mi424wr_uart_resources,
++};
++
++static struct flash_platform_data mi424wr_flash_data = {
++	.map_name	= "cfi_probe",
++	.width		= 2,
++};
++
++static struct resource mi424wr_flash_resource = {
++	.flags		= IORESOURCE_MEM,
++};
++
++static struct platform_device mi424wr_flash = {
++	.name		= "IXP4XX-Flash",
++	.id		= 0,
++	.dev.platform_data = &mi424wr_flash_data,
++	.num_resources	= 1,
++	.resource	= &mi424wr_flash_resource,
++};
++
++static int mi424wr_spi_boardinfo_setup(struct spi_board_info *bi,
++		struct spi_master *master, void *data)
++{
++
++	strlcpy(bi->modalias, "spi-ks8995", sizeof(bi->modalias));
++
++	bi->max_speed_hz = 5000000 /* Hz */;
++	bi->bus_num = master->bus_num;
++	bi->mode = SPI_MODE_0;
++
++	return 0;
++}
++
++static struct spi_gpio_platform_data mi424wr_spi_bus_data = {
++	.pin_cs			= MI424WR_KSSPI_SELECT,
++	.pin_clk		= MI424WR_KSSPI_CLOCK,
++	.pin_miso		= MI424WR_KSSPI_RXD,
++	.pin_mosi		= MI424WR_KSSPI_TXD,
++	.cs_activelow		= 1,
++	.no_spi_delay		= 1,
++	.boardinfo_setup	= mi424wr_spi_boardinfo_setup,
++};
++
++static struct gpio_led mi424wr_gpio_led[] = {
++	{
++		.name		= "moca-wan",	/* green led */
++		.gpio		= MI424WR_MOCA_WAN_LED,
++		.active_low	= 0,
++	}
++};
++
++static struct gpio_led_platform_data mi424wr_gpio_leds_data = {
++	.num_leds	= 1,
++	.leds		= mi424wr_gpio_led,
++};
++
++static struct platform_device mi424wr_gpio_leds = {
++	.name		= "leds-gpio",
++	.id		= -1,
++	.dev.platform_data = &mi424wr_gpio_leds_data,
++};
++
++static uint16_t latch_value = MI424WR_LATCH_DEFAULT;
++static uint16_t __iomem *iobase;
++
++static void mi424wr_latch_set_led(u8 bit, enum led_brightness value)
++{
++
++	if (((MI424WR_LATCH_MASK >> bit) & 1) ^ (value == LED_OFF))
++		latch_value &= ~(0x1 << bit);
++	else
++		latch_value |= (0x1 << bit);
++
++	__raw_writew(latch_value, iobase);
++
++}
++
++static struct latch_led mi424wr_latch_led[] = {
++	{
++		.name	= "power-alarm",
++		.bit	= MI424WR_LATCH_ALARM_LED,
++	},
++	{
++		.name	= "power-ok",
++		.bit	= MI424WR_LATCH_POWER_LED,
++	},
++	{
++		.name	= "wireless",	/* green led */
++		.bit	= MI424WR_LATCH_WIRELESS_LED,
++	},
++	{
++		.name	= "inet-down",	/* red led */
++		.bit	= MI424WR_LATCH_INET_DOWN_LED,
++	},
++	{
++		.name	= "inet-up",	/* green led */
++		.bit	= MI424WR_LATCH_INET_OK_LED,
++	},
++	{
++		.name	= "moca-lan",	/* green led */
++		.bit	= MI424WR_LATCH_MOCA_LAN_LED,
++	},
++	{
++		.name	= "wan-alarm",	/* red led */
++		.bit	= MI424WR_LATCH_WAN_ALARM_LED,
++	}
++};
++
++static struct latch_led_platform_data mi424wr_latch_leds_data = {
++	.num_leds	= ARRAY_SIZE(mi424wr_latch_led),
++	.mem		= 0x51000000,
++	.leds		= mi424wr_latch_led,
++	.set_led        = mi424wr_latch_set_led,
++};
++
++static struct platform_device mi424wr_latch_leds = {
++	.name		= "leds-latch",
++	.id		= -1,
++	.dev.platform_data = &mi424wr_latch_leds_data,
++};
++
++static struct platform_device mi424wr_spi_bus = {
++	.name		= "spi-gpio",
++	.id		= 0,
++	.dev.platform_data = &mi424wr_spi_bus_data,
++};
++
++static struct eth_plat_info mi424wr_wan_data = {
++	.phy		= 17,	/* KS8721 */
++	.rxq		= 3,
++	.txreadyq	= 20,
++};
++
++static struct eth_plat_info mi424wr_lan_data = {
++	.phy		= IXP4XX_ETH_PHY_MAX_ADDR,
++	.phy_mask	= 0x1e, /* ports 1-4 of the KS8995 switch */
++	.rxq		= 4,
++	.txreadyq	= 21,
++};
++
++static struct platform_device mi424wr_npe_devices[] = {
++	{
++		.name			= "ixp4xx_eth",
++		.id			= IXP4XX_ETH_NPEC,
++		.dev.platform_data	= &mi424wr_lan_data,
++		.dev.coherent_dma_mask	= DMA_BIT_MASK(32),
++	}, {
++		.name			= "ixp4xx_eth",
++		.id			= IXP4XX_ETH_NPEB,
++		.dev.platform_data	= &mi424wr_wan_data,
++		.dev.coherent_dma_mask	= DMA_BIT_MASK(32),
++	}
++};
++
++static struct eth_plat_info mi424wr_wanD_data = {
++	.phy		= 5,
++	.rxq		= 4,
++	.txreadyq	= 21,
++};
++
++static struct eth_plat_info mi424wr_lanD_data = {
++	.phy		= IXP4XX_ETH_PHY_MAX_ADDR,
++	.phy_mask	= 0x1e, /* ports 1-4 of the KS8995 switch */
++	.rxq		= 3,
++	.txreadyq	= 20,
++};
++
++static struct platform_device mi424wr_npeD_devices[] = {
++	{
++		.name                   = "ixp4xx_eth",
++		.id                     = IXP4XX_ETH_NPEB,
++		.dev.platform_data      = &mi424wr_lanD_data,
++		.dev.coherent_dma_mask	= DMA_BIT_MASK(32),
++	}, {
++		.name                   = "ixp4xx_eth",
++		.id                     = IXP4XX_ETH_NPEC,
++		.dev.platform_data      = &mi424wr_wanD_data,
++		.dev.coherent_dma_mask	= DMA_BIT_MASK(32),
++	}
++};
++
++static struct platform_device *mi424wr_devices[] __initdata = {
++	&mi424wr_uart_device,
++	&mi424wr_flash,
++	&mi424wr_gpio_leds,
++	&mi424wr_latch_leds,
++	&mi424wr_spi_bus,
++};
++
++static void __init mi424wr_init(void)
++{
++	ixp4xx_sys_init();
++
++	mi424wr_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
++	mi424wr_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + SZ_8M - 1;
++
++	*IXP4XX_EXP_CS0 |= IXP4XX_FLASH_WRITABLE;
++	*IXP4XX_EXP_CS1 = MI424WR_CS1_CONFIG;
++
++	/* configure button as input
++	 */
++	gpio_line_config(MI424WR_BUTTON_GPIO, IXP4XX_GPIO_IN);
++
++	/* Initialize LEDs and enables PCI bus.
++	 */
++	iobase = ioremap_nocache(IXP4XX_EXP_BUS_BASE(1), 0x1000);
++	__raw_writew(latch_value, iobase);
++
++	platform_add_devices(mi424wr_devices, ARRAY_SIZE(mi424wr_devices));
++
++	/* Need to figure out how to detect revD.
++	 * Look for a revision argument sent by redboot.
++	 */
++#define revD 4
++	if (system_rev == revD) {
++		platform_device_register(&mi424wr_npeD_devices[0]);
++		platform_device_register(&mi424wr_npeD_devices[1]);
++	} else {
++		platform_device_register(&mi424wr_npe_devices[0]);
++		platform_device_register(&mi424wr_npe_devices[1]);
++	}
++}
++
++
++MACHINE_START(MI424WR, "Actiontec MI424WR")
++	/* Maintainer: Jose Vasconcellos */
++	.map_io		= ixp4xx_map_io,
++	.init_irq	= ixp4xx_init_irq,
++	.init_time	= ixp4xx_timer_init,
++	.atag_offset	= 0x0100,
++	.init_machine	= mi424wr_init,
++#if defined(CONFIG_PCI)
++	.dma_zone_size	= SZ_64M,
++#endif
++	.restart	= ixp4xx_restart,
++MACHINE_END
++
diff --git a/target/linux/ixp4xx/patches-3.18/190-cambria_support.patch b/target/linux/ixp4xx/patches-3.18/190-cambria_support.patch
new file mode 100644
index 0000000..d6787f4
--- /dev/null
+++ b/target/linux/ixp4xx/patches-3.18/190-cambria_support.patch
@@ -0,0 +1,1131 @@
+--- a/arch/arm/mach-ixp4xx/Kconfig
++++ b/arch/arm/mach-ixp4xx/Kconfig
+@@ -21,6 +21,14 @@ config MACH_AVILA
+ 	  Avila Network Platform. For more information on this platform,
+ 	  see <file:Documentation/arm/IXP4xx>.
+ 
++config MACH_CAMBRIA
++	bool "Cambria"
++	select PCI
++	help
++	  Say 'Y' here if you want your kernel to support the Gateworks
++	  Cambria series. For more information on this platform,
++	  see <file:Documentation/arm/IXP4xx>.
++
+ config MACH_LOFT
+     bool "Loft"
+     depends on MACH_AVILA
+@@ -218,7 +226,7 @@ config CPU_IXP46X
+ 
+ config CPU_IXP43X
+ 	bool
+-	depends on MACH_KIXRP435
++	depends on MACH_KIXRP435 || MACH_CAMBRIA
+ 	default y
+ 
+ config MACH_GTWX5715
+--- a/arch/arm/mach-ixp4xx/Makefile
++++ b/arch/arm/mach-ixp4xx/Makefile
+@@ -7,6 +7,7 @@ obj-pci-n	:=
+ 
+ obj-pci-$(CONFIG_ARCH_IXDP4XX)		+= ixdp425-pci.o
+ obj-pci-$(CONFIG_MACH_AVILA)		+= avila-pci.o
++obj-pci-$(CONFIG_MACH_CAMBRIA)		+= cambria-pci.o
+ obj-pci-$(CONFIG_MACH_IXDPG425)		+= ixdpg425-pci.o
+ obj-pci-$(CONFIG_ARCH_ADI_COYOTE)	+= coyote-pci.o
+ obj-pci-$(CONFIG_MACH_GTWX5715)		+= gtwx5715-pci.o
+@@ -31,6 +32,7 @@ obj-y	+= common.o
+ 
+ obj-$(CONFIG_ARCH_IXDP4XX)	+= ixdp425-setup.o
+ obj-$(CONFIG_MACH_AVILA)	+= avila-setup.o
++obj-$(CONFIG_MACH_CAMBRIA)	+= cambria-setup.o
+ obj-$(CONFIG_MACH_IXDPG425)	+= coyote-setup.o
+ obj-$(CONFIG_ARCH_ADI_COYOTE)	+= coyote-setup.o
+ obj-$(CONFIG_MACH_GTWX5715)	+= gtwx5715-setup.o
+--- /dev/null
++++ b/arch/arm/mach-ixp4xx/cambria-pci.c
+@@ -0,0 +1,78 @@
++/*
++ * arch/arch/mach-ixp4xx/cambria-pci.c
++ *
++ * PCI setup routines for Gateworks Cambria series
++ *
++ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
++ *
++ * based on coyote-pci.c:
++ *	Copyright (C) 2002 Jungo Software Technologies.
++ *	Copyright (C) 2003 MontaVista Softwrae, Inc.
++ *
++ * Maintainer: Imre Kaloz <kaloz@openwrt.org>
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ *
++ */
++
++#include <linux/kernel.h>
++#include <linux/pci.h>
++#include <linux/init.h>
++#include <linux/irq.h>
++
++#include <asm/mach-types.h>
++#include <mach/hardware.h>
++#include <asm/irq.h>
++
++#include <asm/mach/pci.h>
++
++extern void ixp4xx_pci_preinit(void);
++extern int ixp4xx_setup(int nr, struct pci_sys_data *sys);
++extern struct pci_bus *ixp4xx_scan_bus(int nr, struct pci_sys_data *sys);
++
++void __init cambria_pci_preinit(void)
++{
++	irq_set_irq_type(IRQ_IXP4XX_GPIO11, IRQ_TYPE_LEVEL_LOW);
++	irq_set_irq_type(IRQ_IXP4XX_GPIO10, IRQ_TYPE_LEVEL_LOW);
++	irq_set_irq_type(IRQ_IXP4XX_GPIO9, IRQ_TYPE_LEVEL_LOW);
++	irq_set_irq_type(IRQ_IXP4XX_GPIO8, IRQ_TYPE_LEVEL_LOW);
++
++	ixp4xx_pci_preinit();
++}
++
++static int __init cambria_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
++{
++	if (slot == 1)
++		return IRQ_IXP4XX_GPIO11;
++	else if (slot == 2)
++		return IRQ_IXP4XX_GPIO10;
++	else if (slot == 3)
++		return IRQ_IXP4XX_GPIO9;
++	else if (slot == 4)
++		return IRQ_IXP4XX_GPIO8;
++	else if (slot == 6)
++		return IRQ_IXP4XX_GPIO10;
++	else if (slot == 15)
++		return IRQ_IXP4XX_GPIO8;
++
++	else return -1;
++}
++
++struct hw_pci cambria_pci __initdata = {
++	.nr_controllers = 1,
++	.preinit =        cambria_pci_preinit,
++	.ops =            &ixp4xx_ops,
++	.setup =          ixp4xx_setup,
++	.map_irq =        cambria_map_irq,
++};
++
++int __init cambria_pci_init(void)
++{
++	if (machine_is_cambria())
++		pci_common_init(&cambria_pci);
++	return 0;
++}
++
++subsys_initcall(cambria_pci_init);
+--- /dev/null
++++ b/arch/arm/mach-ixp4xx/cambria-setup.c
+@@ -0,0 +1,1003 @@
++/*
++ * arch/arm/mach-ixp4xx/cambria-setup.c
++ *
++ * Board setup for the Gateworks Cambria series
++ *
++ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
++ * Copyright (C) 2012 Gateworks Corporation <support@gateworks.com>
++ *
++ * based on coyote-setup.c:
++ *      Copyright (C) 2003-2005 MontaVista Software, Inc.
++ *
++ * Author: Imre Kaloz <kaloz@openwrt.org>
++ *         Tim Harvey <tharvey@gateworks.com>
++ */
++
++#include <linux/device.h>
++#include <linux/gpio_keys.h>
++#include <linux/gpio.h>
++#include <linux/i2c.h>
++#include <linux/i2c-gpio.h>
++#include <linux/platform_data/at24.h>
++#include <linux/i2c/gw_i2c_pld.h>
++#include <linux/platform_data/pca953x.h>
++#include <linux/if_ether.h>
++#include <linux/init.h>
++#include <linux/input.h>
++#include <linux/kernel.h>
++#include <linux/leds.h>
++#include <linux/memory.h>
++#include <linux/netdevice.h>
++#include <linux/serial.h>
++#include <linux/serial_8250.h>
++#include <linux/slab.h>
++#include <linux/socket.h>
++#include <linux/types.h>
++#include <linux/tty.h>
++#include <linux/irq.h>
++#include <linux/usb/ehci_pdriver.h>
++
++#include <mach/hardware.h>
++#include <asm/irq.h>
++#include <asm/mach-types.h>
++#include <asm/mach/arch.h>
++#include <asm/mach/flash.h>
++#include <asm/setup.h>
++
++#define ARRAY_AND_SIZE(x)       (x), ARRAY_SIZE(x)
++
++struct cambria_board_info {
++	unsigned char	*model;
++	void		(*setup)(void);
++};
++
++static struct cambria_board_info *cambria_info __initdata;
++
++static struct flash_platform_data cambria_flash_data = {
++	.map_name	= "cfi_probe",
++	.width		= 2,
++};
++
++static struct resource cambria_flash_resource = {
++	.flags		= IORESOURCE_MEM,
++};
++
++static struct platform_device cambria_flash = {
++	.name		= "IXP4XX-Flash",
++	.id		= 0,
++	.dev		= {
++		.platform_data = &cambria_flash_data,
++	},
++	.num_resources	= 1,
++	.resource	= &cambria_flash_resource,
++};
++
++static struct i2c_gpio_platform_data cambria_i2c_gpio_data = {
++	.sda_pin	= 7,
++	.scl_pin	= 6,
++};
++
++static struct platform_device cambria_i2c_gpio = {
++	.name		= "i2c-gpio",
++	.id		= 0,
++	.dev = {
++		.platform_data	= &cambria_i2c_gpio_data,
++	},
++};
++
++#ifdef SFP_SERIALID
++static struct i2c_gpio_platform_data cambria_i2c_gpio_sfpa_data = {
++	.sda_pin	= 113,
++	.scl_pin	= 112,
++	.sda_is_open_drain = 0,
++	.scl_is_open_drain = 0,
++};
++
++static struct platform_device cambria_i2c_gpio_sfpa = {
++	.name		= "i2c-gpio",
++	.id		= 1,
++	.dev = {
++		.platform_data	= &cambria_i2c_gpio_sfpa_data,
++	},
++};
++
++static struct i2c_gpio_platform_data cambria_i2c_gpio_sfpb_data = {
++	.sda_pin	= 115,
++	.scl_pin	= 114,
++	.sda_is_open_drain = 0,
++	.scl_is_open_drain = 0,
++};
++
++static struct platform_device cambria_i2c_gpio_sfpb = {
++	.name		= "i2c-gpio",
++	.id		= 2,
++	.dev = {
++		.platform_data	= &cambria_i2c_gpio_sfpb_data,
++	},
++};
++#endif // #ifdef SFP_SERIALID
++
++static struct eth_plat_info cambria_npec_data = {
++	.phy		= 1,
++	.rxq		= 4,
++	.txreadyq	= 21,
++};
++
++static struct eth_plat_info cambria_npea_data = {
++	.phy		= 2,
++	.rxq		= 2,
++	.txreadyq	= 19,
++};
++
++static struct platform_device cambria_npec_device = {
++	.name			= "ixp4xx_eth",
++	.id			= IXP4XX_ETH_NPEC,
++	.dev.platform_data	= &cambria_npec_data,
++	.dev.coherent_dma_mask	= DMA_BIT_MASK(32),
++};
++
++static struct platform_device cambria_npea_device = {
++	.name			= "ixp4xx_eth",
++	.id			= IXP4XX_ETH_NPEA,
++	.dev.platform_data	= &cambria_npea_data,
++	.dev.coherent_dma_mask	= DMA_BIT_MASK(32),
++};
++
++static struct resource cambria_uart_resource = {
++	.start	= IXP4XX_UART1_BASE_PHYS,
++	.end	= IXP4XX_UART1_BASE_PHYS + 0x0fff,
++	.flags	= IORESOURCE_MEM,
++};
++
++static struct plat_serial8250_port cambria_uart_data[] = {
++	{
++		.mapbase	= IXP4XX_UART1_BASE_PHYS,
++		.membase	= (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET,
++		.irq		= IRQ_IXP4XX_UART1,
++		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
++		.iotype		= UPIO_MEM,
++		.regshift	= 2,
++		.uartclk	= IXP4XX_UART_XTAL,
++	},
++	{ },
++};
++
++static struct platform_device cambria_uart = {
++	.name		= "serial8250",
++	.id		= PLAT8250_DEV_PLATFORM,
++	.dev = {
++		.platform_data	= cambria_uart_data,
++	},
++	.num_resources	= 1,
++	.resource	= &cambria_uart_resource,
++};
++
++static struct resource cambria_optional_uart_resources[] = {
++	{
++		.start	= 0x52000000,
++		.end	= 0x52000fff,
++		.flags	= IORESOURCE_MEM
++	},
++	{
++		.start	= 0x53000000,
++		.end	= 0x53000fff,
++		.flags	= IORESOURCE_MEM
++	},
++	{
++		.start	= 0x52000000,
++		.end	= 0x52000fff,
++		.flags	= IORESOURCE_MEM
++	},
++	{
++		.start	= 0x52000000,
++		.end	= 0x52000fff,
++		.flags	= IORESOURCE_MEM
++	},
++	{
++		.start	= 0x52000000,
++		.end	= 0x52000fff,
++		.flags	= IORESOURCE_MEM
++	},
++	{
++		.start	= 0x52000000,
++		.end	= 0x52000fff,
++		.flags	= IORESOURCE_MEM
++	},
++	{
++		.start	= 0x52000000,
++		.end	= 0x52000fff,
++		.flags	= IORESOURCE_MEM
++	},
++	{
++		.start	= 0x53000000,
++		.end	= 0x53000fff,
++		.flags	= IORESOURCE_MEM
++	}
++};
++
++static struct plat_serial8250_port cambria_optional_uart_data[] = {
++	{
++		.flags		= UPF_BOOT_AUTOCONF,
++		.iotype		= UPIO_MEM_DELAY,
++		.regshift	= 0,
++		.uartclk	= 1843200,
++		.rw_delay	= 10,
++	},
++	{
++		.flags		= UPF_BOOT_AUTOCONF,
++		.iotype		= UPIO_MEM_DELAY,
++		.regshift	= 0,
++		.uartclk	= 1843200,
++		.rw_delay	= 10,
++	},
++	{
++		.flags		= UPF_BOOT_AUTOCONF,
++		.iotype		= UPIO_MEM,
++		.regshift	= 0,
++		.uartclk	= 18432000,
++	},
++	{
++		.flags		= UPF_BOOT_AUTOCONF,
++		.iotype		= UPIO_MEM,
++		.regshift	= 0,
++		.uartclk	= 18432000,
++	},
++	{
++		.flags		= UPF_BOOT_AUTOCONF,
++		.iotype		= UPIO_MEM,
++		.regshift	= 0,
++		.uartclk	= 18432000,
++	},
++	{
++		.flags		= UPF_BOOT_AUTOCONF,
++		.iotype		= UPIO_MEM,
++		.regshift	= 0,
++		.uartclk	= 18432000,
++	},
++	{
++		.flags		= UPF_BOOT_AUTOCONF,
++		.iotype		= UPIO_MEM,
++		.regshift	= 0,
++		.uartclk	= 18432000,
++	},
++  { },
++};
++
++static struct platform_device cambria_optional_uart = {
++	.name		= "serial8250",
++	.id		= PLAT8250_DEV_PLATFORM1,
++	.dev.platform_data	= cambria_optional_uart_data,
++	.num_resources	= 2,
++	.resource	= cambria_optional_uart_resources,
++};
++
++static struct resource cambria_pata_resources[] = {
++	{
++		.flags	= IORESOURCE_MEM
++	},
++	{
++		.flags	= IORESOURCE_MEM,
++	},
++	{
++		.name	= "intrq",
++		.start	= IRQ_IXP4XX_GPIO12,
++		.end	= IRQ_IXP4XX_GPIO12,
++		.flags	= IORESOURCE_IRQ,
++	},
++};
++
++static struct ixp4xx_pata_data cambria_pata_data = {
++	.cs0_bits	= 0xbfff3c03,
++	.cs1_bits	= 0xbfff3c03,
++};
++
++static struct platform_device cambria_pata = {
++	.name			= "pata_ixp4xx_cf",
++	.id			= 0,
++	.dev.platform_data      = &cambria_pata_data,
++	.num_resources		= ARRAY_SIZE(cambria_pata_resources),
++	.resource		= cambria_pata_resources,
++};
++
++static struct gpio_led cambria_gpio_leds[] = {
++	{
++		.name		= "user",
++		.gpio		= 5,
++		.active_low 	= 1,
++	},
++	{
++		.name		= "user2",
++		.gpio		= 0,
++		.active_low 	= 1,
++	},
++	{
++		.name		= "user3",
++		.gpio		= 0,
++		.active_low 	= 1,
++	},
++	{
++		.name		= "user4",
++		.gpio		= 0,
++		.active_low 	= 1,
++	}
++};
++
++static struct gpio_led_platform_data cambria_gpio_leds_data = {
++	.num_leds	= 1,
++	.leds		= cambria_gpio_leds,
++};
++
++static struct platform_device cambria_gpio_leds_device = {
++	.name		= "leds-gpio",
++	.id		= -1,
++	.dev.platform_data = &cambria_gpio_leds_data,
++};
++
++static struct resource cambria_gpio_resources[] = {
++	{
++		.name = "gpio",
++		.flags  = 0,
++	},
++};
++
++static struct gpio cambria_gpios_gw2350[] = {
++	// ARM GPIO
++#if 0 // configured from bootloader
++	{  0, GPIOF_IN,            "ARM_DIO0" },
++	{  1, GPIOF_IN,            "ARM_DIO1" },
++	{  2, GPIOF_IN,            "ARM_DIO2" },
++	{  3, GPIOF_IN,            "ARM_DIO3" },
++	{  4, GPIOF_IN,            "ARM_DIO4" },
++	{  5, GPIOF_IN,            "ARM_DIO5" },
++	{ 12, GPIOF_OUT_INIT_HIGH, "WDOGEN#" },
++#endif
++	{  8, GPIOF_IN,            "ARM_DIO8" },
++	{  9, GPIOF_IN,            "ARM_DIO9" },
++};
++
++static struct gpio cambria_gpios_gw2358[] = {
++	// ARM GPIO
++#if 0 // configured from bootloader
++	{  0, GPIOF_IN,            "*VINLOW#" },
++	{  2, GPIOF_IN,            "*GPS_PPS" },
++	{  3, GPIOF_IN,            "*GPS_IRQ#" },
++	{  4, GPIOF_IN,            "*RS485_IRQ#" },
++	{  5, GPIOF_IN,            "*SER_EN#" },
++	{ 14, GPIOF_OUT_INIT_HIGH, "*WDOGEN#" },
++#endif
++};
++
++static struct gpio cambria_gpios_gw2359[] = {
++	// ARM GPIO
++#if 0 // configured from bootloader
++	{  0, GPIOF_IN,            "*PCA_IRQ#" },
++	{  1, GPIOF_IN,            "ARM_DIO1" },
++	{  2, GPIOF_IN,            "ARM_DIO2" },
++	{  3, GPIOF_IN,            "ARM_DIO3" },
++	{  4, GPIOF_IN,            "ARM_DIO4" },
++	{  5, GPIOF_IN,            "ARM_DIO5" },
++	{  8, GPIOF_OUT_INIT_HIGH, "*WDOGEN#" },
++#endif
++	{ 11, GPIOF_OUT_INIT_HIGH, "*SER_EN"   },       // console serial enable
++	{ 12, GPIOF_IN,            "*GSC_IRQ#" },
++	{ 13, GPIOF_OUT_INIT_HIGH, "*PCIE_RST#"},
++	// GSC GPIO
++#if !(IS_ENABLED(CONFIG_KEYBOARD_GPIO_POLLED))
++	{100, GPIOF_IN,            "*USER_PB#" },
++#endif
++	{103, GPIOF_OUT_INIT_HIGH, "*5V_EN" },         // 5V aux supply enable
++	{108, GPIOF_IN,            "*SMUXDA0" },
++	{109, GPIOF_IN,            "*SMUXDA1" },
++	{110, GPIOF_IN,            "*SMUXDA2" },
++	{111, GPIOF_IN,            "*SMUXDB0" },
++	{112, GPIOF_IN,            "*SMUXDB1" },
++	{113, GPIOF_IN,            "*SMUXDB2" },
++	// PCA GPIO
++	{118, GPIOF_IN,            "*USIM2_DET#"},     // USIM2 Detect
++	{120, GPIOF_OUT_INIT_LOW,  "*USB1_PCI_SEL"},   // USB1  Select (1=PCI, 0=FP)
++	{121, GPIOF_OUT_INIT_LOW,  "*USB2_PCI_SEL"},   // USB2  Select (1=PCI, 0=FP)
++	{122, GPIOF_IN,            "*USIM1_DET#"},     // USIM1 Detect
++	{123, GPIOF_OUT_INIT_HIGH, "*COM1_DTR#" },     // J21/J10
++	{124, GPIOF_IN,            "*COM1_DSR#" },     // J21/J10
++	{127, GPIOF_IN,            "PCA_DIO0" },
++	{128, GPIOF_IN,            "PCA_DIO1" },
++	{129, GPIOF_IN,            "PCA_DIO2" },
++	{130, GPIOF_IN,            "PCA_DIO3" },
++	{131, GPIOF_IN,            "PCA_DIO4" },
++};
++
++static struct gpio cambria_gpios_gw2360[] = {
++	// ARM GPIO
++	{  0, GPIOF_IN,            "*PCA_IRQ#" },
++	{ 11, GPIOF_OUT_INIT_LOW, "*SER0_EN#" },
++	{ 12, GPIOF_IN,            "*GSC_IRQ#" },
++	{ 13, GPIOF_OUT_INIT_HIGH, "*PCIE_RST#"},
++	// GSC GPIO
++#if !(IS_ENABLED(CONFIG_KEYBOARD_GPIO_POLLED))
++	{100, GPIOF_IN,            "*USER_PB#" },
++#endif
++	{108, GPIOF_OUT_INIT_LOW,  "*ENET1_EN#" },     // ENET1 TX Enable
++	{109, GPIOF_IN,            "*ENET1_PRES#" },   // ENET1 Detect (0=SFP present)
++	{110, GPIOF_OUT_INIT_LOW,  "*ENET2_EN#" },     // ENET2 TX Enable
++	{111, GPIOF_IN,            "*ENET2_PRES#"},    // ENET2 Detect (0=SFP present)
++	// PCA GPIO
++	{116, GPIOF_OUT_INIT_HIGH, "*USIM2_LOC"},      // USIM2 Select (1=Loc, 0=Rem)
++	{117, GPIOF_IN,            "*USIM2_DET_LOC#" },// USIM2 Detect (Local Slot)
++	{118, GPIOF_IN,            "*USIM2_DET_REM#" },// USIM2 Detect (Remote Slot)
++	{120, GPIOF_OUT_INIT_LOW,  "*USB1_PCI_SEL"},   // USB1  Select (1=PCIe1, 0=J1)
++	{121, GPIOF_OUT_INIT_LOW,  "*USB2_PCI_SEL"},   // USB2  Select (1=PCIe2, 0=J1)
++	{122, GPIOF_IN,            "*USIM1_DET#"},     // USIM1 Detect
++	{127, GPIOF_IN,            "DIO0" },
++	{128, GPIOF_IN,            "DIO1" },
++	{129, GPIOF_IN,            "DIO2" },
++	{130, GPIOF_IN,            "DIO3" },
++	{131, GPIOF_IN,            "DIO4" },
++};
++
++static struct latch_led cambria_latch_leds[] = {
++	{
++		.name	= "ledA",  /* green led */
++		.bit	= 0,
++	},
++	{
++		.name	= "ledB",  /* green led */
++		.bit	= 1,
++	},
++	{
++		.name	= "ledC",  /* green led */
++		.bit	= 2,
++	},
++	{
++		.name	= "ledD",  /* green led */
++		.bit	= 3,
++	},
++	{
++		.name	= "ledE",  /* green led */
++		.bit	= 4,
++	},
++	{
++		.name	= "ledF",  /* green led */
++		.bit	= 5,
++	},
++	{
++		.name	= "ledG",  /* green led */
++		.bit	= 6,
++	},
++	{
++		.name	= "ledH",  /* green led */
++		.bit	= 7,
++	}
++};
++
++static struct latch_led_platform_data cambria_latch_leds_data = {
++	.num_leds	= 8,
++	.leds		= cambria_latch_leds,
++	.mem		= 0x53F40000,
++};
++
++static struct platform_device cambria_latch_leds_device = {
++	.name		= "leds-latch",
++	.id		= -1,
++	.dev.platform_data = &cambria_latch_leds_data,
++};
++
++static struct resource cambria_usb0_resources[] = {
++	{
++		.start	= 0xCD000000,
++		.end	= 0xCD000300,
++		.flags	= IORESOURCE_MEM,
++	},
++	{
++		.start	= 32,
++		.flags	= IORESOURCE_IRQ,
++	},
++};
++
++static struct resource cambria_usb1_resources[] = {
++	{
++		.start	= 0xCE000000,
++		.end	= 0xCE000300,
++		.flags	= IORESOURCE_MEM,
++	},
++	{
++		.start	= 33,
++		.flags	= IORESOURCE_IRQ,
++	},
++};
++
++static u64 ehci_dma_mask = ~(u32)0;
++
++static struct usb_ehci_pdata cambria_usb_pdata = {
++	.big_endian_desc = 1,
++	.big_endian_mmio = 1,
++	.has_tt = 1,
++	.caps_offset = 0x100,
++};
++
++static struct platform_device cambria_usb0_device =  {
++	.name		= "ehci-platform",
++	.id		= 0,
++	.resource	= cambria_usb0_resources,
++	.num_resources	= ARRAY_SIZE(cambria_usb0_resources),
++	.dev = {
++		.dma_mask		= &ehci_dma_mask,
++		.coherent_dma_mask	= 0xffffffff,
++		.platform_data = &cambria_usb_pdata,
++	},
++};
++
++static struct platform_device cambria_usb1_device = {
++	.name		= "ehci-platform",
++	.id		= 1,
++	.resource	= cambria_usb1_resources,
++	.num_resources	= ARRAY_SIZE(cambria_usb1_resources),
++	.dev = {
++		.dma_mask		= &ehci_dma_mask,
++		.coherent_dma_mask	= 0xffffffff,
++		.platform_data = &cambria_usb_pdata,
++	},
++};
++
++static struct gw_i2c_pld_platform_data gw_i2c_pld_data0 = {
++	.gpio_base	= 16,
++	.nr_gpio	= 8,
++};
++
++static struct gw_i2c_pld_platform_data gw_i2c_pld_data1 = {
++	.gpio_base	= 24,
++	.nr_gpio	= 2,
++};
++
++
++static struct gpio_keys_button cambria_gpio_buttons[] = {
++	{
++		.desc		= "user",
++		.type		= EV_KEY,
++		.code		= BTN_0,
++		.debounce_interval = 6,
++		.gpio		= 25,
++	}
++};
++
++static struct gpio_keys_platform_data cambria_gpio_buttons_data = {
++	.poll_interval	= 500,
++	.nbuttons	= 1,
++	.buttons	= cambria_gpio_buttons,
++};
++
++static struct platform_device cambria_gpio_buttons_device = {
++	.name			= "gpio-keys-polled",
++	.id			= -1,
++	.dev.platform_data	= &cambria_gpio_buttons_data,
++};
++
++static struct platform_device *cambria_devices[] __initdata = {
++	&cambria_i2c_gpio,
++	&cambria_flash,
++	&cambria_uart,
++};
++
++static int cambria_register_gpio(struct gpio *array, size_t num)
++{
++	int i, err, ret;
++
++	ret = 0;
++	for (i = 0; i < num; i++, array++) {
++		const char *label = array->label;
++		if (label[0] == '*')
++			label++;
++		err = gpio_request_one(array->gpio, array->flags, label);
++		if (err)
++			ret = err;
++		else {
++			err = gpio_export(array->gpio, array->label[0] != '*');
++		}
++	}
++	return ret;
++}
++
++static void __init cambria_gw23xx_setup(void)
++{
++	cambria_gpio_resources[0].start = (1 << 0) | (1 << 1) | (1 << 2) | (1 << 3) | (1 << 4) |\
++																		(1 << 5) | (1 << 8) | (1 << 9) | (1 << 12);
++	cambria_gpio_resources[0].end = cambria_gpio_resources[0].start;
++
++	platform_device_register(&cambria_npec_device);
++	platform_device_register(&cambria_npea_device);
++}
++
++static void __init cambria_gw2350_setup(void)
++{
++	*IXP4XX_EXP_CS2 = 0xBFFF3C43;
++	irq_set_irq_type(IRQ_IXP4XX_GPIO3, IRQ_TYPE_EDGE_RISING);
++	cambria_optional_uart_data[0].mapbase	= 0x52FF0000;
++	cambria_optional_uart_data[0].membase	= (void __iomem *)ioremap(0x52FF0000, 0x0fff);
++	cambria_optional_uart_data[0].irq		= IRQ_IXP4XX_GPIO3;
++
++	*IXP4XX_EXP_CS3 = 0xBFFF3C43;
++	irq_set_irq_type(IRQ_IXP4XX_GPIO4, IRQ_TYPE_EDGE_RISING);
++	cambria_optional_uart_data[1].mapbase	= 0x53FF0000;
++	cambria_optional_uart_data[1].membase	= (void __iomem *)ioremap(0x53FF0000, 0x0fff);
++	cambria_optional_uart_data[1].irq		= IRQ_IXP4XX_GPIO4;
++
++	cambria_gpio_resources[0].start = (1 << 0) | (1 << 1) | (1 << 2) | (1 << 3) | (1 << 4) |\
++																		(1 << 5) | (1 << 8) | (1 << 9) | (1 << 12);
++	cambria_gpio_resources[0].end = cambria_gpio_resources[0].start;
++
++	platform_device_register(&cambria_optional_uart);
++	platform_device_register(&cambria_npec_device);
++	platform_device_register(&cambria_npea_device);
++
++	platform_device_register(&cambria_usb0_device);
++	platform_device_register(&cambria_usb1_device);
++
++	platform_device_register(&cambria_gpio_leds_device);
++
++	/* gpio config (/sys/class/gpio) */
++	cambria_register_gpio(ARRAY_AND_SIZE(cambria_gpios_gw2350));
++}
++
++static void __init cambria_gw2358_setup(void)
++{
++	*IXP4XX_EXP_CS3 = 0xBFFF3C43; // bit0 = 16bit vs 8bit bus
++	irq_set_irq_type(IRQ_IXP4XX_GPIO3, IRQ_TYPE_EDGE_RISING);
++	cambria_optional_uart_data[0].mapbase	= 0x53FC0000;
++	cambria_optional_uart_data[0].membase	= (void __iomem *)ioremap(0x53FC0000, 0x0fff);
++	cambria_optional_uart_data[0].irq		= IRQ_IXP4XX_GPIO3;
++
++	irq_set_irq_type(IRQ_IXP4XX_GPIO4, IRQ_TYPE_EDGE_RISING);
++	cambria_optional_uart_data[1].mapbase	= 0x53F80000;
++	cambria_optional_uart_data[1].membase	= (void __iomem *)ioremap(0x53F80000, 0x0fff);
++	cambria_optional_uart_data[1].irq		= IRQ_IXP4XX_GPIO4;
++
++	cambria_gpio_resources[0].start = (1 << 14) | (1 << 16) | (1 << 17) | (1 << 18) |\
++																		(1 << 19) | (1 << 20) | (1 << 24) | (1 << 25);
++	cambria_gpio_resources[0].end = cambria_gpio_resources[0].start;
++
++	platform_device_register(&cambria_optional_uart);
++
++	platform_device_register(&cambria_npec_device);
++	platform_device_register(&cambria_npea_device);
++
++	platform_device_register(&cambria_usb0_device);
++	platform_device_register(&cambria_usb1_device);
++
++	platform_device_register(&cambria_pata);
++
++	cambria_gpio_leds[0].gpio = 24;
++	platform_device_register(&cambria_gpio_leds_device);
++
++	platform_device_register(&cambria_latch_leds_device);
++
++	platform_device_register(&cambria_gpio_buttons_device);
++
++	/* gpio config (/sys/class/gpio) */
++	cambria_register_gpio(ARRAY_AND_SIZE(cambria_gpios_gw2358));
++}
++
++static void __init cambria_gw2359_setup(void)
++{
++#if defined(CONFIG_MVSWITCH_PHY) || defined(CONFIG_MVSWITCH_PHY_MODULE)
++	/* The mvswitch driver has some hard-coded values which could
++	 * easily be turned into a platform resource if needed.  For now they
++	 * match our hardware configuration:
++	 *  MV_BASE    0x10 - phy base address
++	 *  MV_WANPORT 0 - Port0 (ENET2) is WAN (SFP module)
++	 *  MV_CPUPORT 5 - Port5 is CPU NPEA (eth1)
++	 *
++	 * The mvswitch driver registers a fixup which forces a driver match
++	 * if phy_addr matches MV_BASE
++	 *
++	 * Two static defautl VLAN's are created: WAN port in 1, and all other ports
++	 * in the other.
++	 */
++	cambria_npea_data.phy = 0x10; // mvswitch driver catches this
++#else
++	// Switch Port5 to CPU is MII<->MII (no PHY) - this disables the genphy driver
++	cambria_npea_data.phy = IXP4XX_ETH_PHY_MAX_ADDR;
++	// CPU NPE-C is in bridge bypass mode to Port4 PHY@0x14
++	cambria_npec_data.phy = 0x14;
++#endif
++	platform_device_register(&cambria_npec_device);
++	platform_device_register(&cambria_npea_device);
++
++	platform_device_register(&cambria_usb0_device);
++	platform_device_register(&cambria_usb1_device);
++
++	cambria_gpio_leds_data.num_leds = 3;
++	cambria_gpio_leds[0].name = "user1";
++	cambria_gpio_leds[0].gpio = 125; // PNLLED1#
++	cambria_gpio_leds[1].gpio = 126; // PNLLED3#
++	cambria_gpio_leds[2].gpio = 119; // PNLLED4#
++	platform_device_register(&cambria_gpio_leds_device);
++
++#if (IS_ENABLED(CONFIG_KEYBOARD_GPIO_POLLED))
++	cambria_gpio_buttons[0].gpio = 100;
++	platform_device_register(&cambria_gpio_buttons_device);
++#endif
++
++	/* gpio config (/sys/class/gpio) */
++	cambria_register_gpio(ARRAY_AND_SIZE(cambria_gpios_gw2359));
++}
++
++static void __init cambria_gw2360_setup(void)
++{
++	/* The GW2360 has 8 UARTs in addition to the 1 IXP4xxx UART.
++	 * The chip-selects are expanded via a 3-to-8 decoder and CS2
++	 * and they are 8bit devices
++	 */
++	*IXP4XX_EXP_CS2 = 0xBFFF3C43;
++	cambria_optional_uart_data[0].mapbase = 0x52000000;
++	cambria_optional_uart_data[0].membase = (void __iomem *)ioremap(0x52000000, 0x0fff);
++	cambria_optional_uart_data[0].uartclk = 18432000;
++	cambria_optional_uart_data[0].iotype  = UPIO_MEM;
++	cambria_optional_uart_data[0].irq     = IRQ_IXP4XX_GPIO2;
++	irq_set_irq_type(IRQ_IXP4XX_GPIO2, IRQ_TYPE_EDGE_RISING);
++
++	cambria_optional_uart_data[1].mapbase = 0x52000008;
++	cambria_optional_uart_data[1].membase = (void __iomem *)ioremap(0x52000008, 0x0fff);
++	cambria_optional_uart_data[1].uartclk = 18432000;
++	cambria_optional_uart_data[1].iotype  = UPIO_MEM;
++	cambria_optional_uart_data[1].irq     = IRQ_IXP4XX_GPIO3;
++	irq_set_irq_type(IRQ_IXP4XX_GPIO3, IRQ_TYPE_EDGE_RISING);
++
++	cambria_optional_uart_data[2].mapbase = 0x52000010;
++	cambria_optional_uart_data[2].membase = (void __iomem *)ioremap(0x52000010, 0x0fff);
++	cambria_optional_uart_data[2].uartclk = 18432000;
++	cambria_optional_uart_data[2].iotype  = UPIO_MEM;
++	cambria_optional_uart_data[2].irq     = IRQ_IXP4XX_GPIO4;
++	irq_set_irq_type(IRQ_IXP4XX_GPIO4, IRQ_TYPE_EDGE_RISING);
++
++	cambria_optional_uart_data[3].mapbase = 0x52000018;
++	cambria_optional_uart_data[3].membase = (void __iomem *)ioremap(0x52000018, 0x0fff);
++	cambria_optional_uart_data[3].uartclk = 18432000;
++	cambria_optional_uart_data[3].iotype  = UPIO_MEM;
++	cambria_optional_uart_data[3].irq     = IRQ_IXP4XX_GPIO5;
++	irq_set_irq_type(IRQ_IXP4XX_GPIO5, IRQ_TYPE_EDGE_RISING);
++
++	cambria_optional_uart_data[4].mapbase = 0x52000020;
++	cambria_optional_uart_data[4].membase = (void __iomem *)ioremap(0x52000020, 0x0fff);
++	cambria_optional_uart_data[4].uartclk = 18432000;
++	cambria_optional_uart_data[4].iotype  = UPIO_MEM;
++	cambria_optional_uart_data[4].irq     = IRQ_IXP4XX_GPIO8;
++	irq_set_irq_type(IRQ_IXP4XX_GPIO8, IRQ_TYPE_EDGE_RISING);
++
++	cambria_optional_uart_data[5].mapbase = 0x52000028;
++	cambria_optional_uart_data[5].membase = (void __iomem *)ioremap(0x52000028, 0x0fff);
++	cambria_optional_uart_data[5].uartclk = 18432000;
++	cambria_optional_uart_data[5].iotype  = UPIO_MEM;
++	cambria_optional_uart_data[5].irq     = IRQ_IXP4XX_GPIO9;
++	irq_set_irq_type(IRQ_IXP4XX_GPIO9, IRQ_TYPE_EDGE_RISING);
++
++	cambria_optional_uart_data[6].mapbase = 0x52000030;
++	cambria_optional_uart_data[6].membase = (void __iomem *)ioremap(0x52000030, 0x0fff);
++	cambria_optional_uart_data[6].uartclk = 18432000;
++	cambria_optional_uart_data[6].iotype  = UPIO_MEM;
++	cambria_optional_uart_data[6].irq     = IRQ_IXP4XX_GPIO10;
++	irq_set_irq_type(IRQ_IXP4XX_GPIO10, IRQ_TYPE_EDGE_RISING);
++
++	cambria_optional_uart.num_resources   = 7,
++	platform_device_register(&cambria_optional_uart);
++
++#if defined(CONFIG_MVSWITCH_PHY) || defined(CONFIG_MVSWITCH_PHY_MODULE)
++	/* The mvswitch driver has some hard-coded values which could
++	 * easily be turned into a platform resource if needed.  For now they
++	 * match our hardware configuration:
++	 *  MV_BASE    0x10 - phy base address
++	 *  MV_WANPORT 0 - Port0 (ENET2) is WAN (SFP module)
++	 *  MV_CPUPORT 5 - Port5 is CPU NPEA (eth1)
++	 *
++	 * The mvswitch driver registers a fixup which forces a driver match
++	 * if phy_addr matches MV_BASE
++	 *
++	 * Two static defautl VLAN's are created: WAN port in 1, and all other ports
++	 * in the other.
++	 */
++	cambria_npea_data.phy = 0x10; // mvswitch driver catches this
++#else
++	// Switch Port5 to CPU is MII<->MII (no PHY) - this disables the generic PHY driver
++	cambria_npea_data.phy = IXP4XX_ETH_PHY_MAX_ADDR;
++#endif
++
++	// disable genphy autonegotiation on NPE-C PHY (eth1) as its 100BaseFX
++	//cambria_npec_data.noautoneg = 1;   // disable autoneg
++	cambria_npec_data.speed_10 = 0;    // 100mbps
++	cambria_npec_data.half_duplex = 0; // full-duplex
++	platform_device_register(&cambria_npec_device);
++	platform_device_register(&cambria_npea_device);
++
++	platform_device_register(&cambria_usb0_device);
++	platform_device_register(&cambria_usb1_device);
++
++	cambria_gpio_leds_data.num_leds = 3;
++	cambria_gpio_leds[0].name = "user1";
++	cambria_gpio_leds[0].gpio = 125;
++	cambria_gpio_leds[1].gpio = 126;
++	cambria_gpio_leds[2].gpio = 119;
++	platform_device_register(&cambria_gpio_leds_device);
++
++#if (IS_ENABLED(CONFIG_KEYBOARD_GPIO_POLLED))
++	cambria_gpio_buttons[0].gpio = 100;
++	platform_device_register(&cambria_gpio_buttons_device);
++#endif
++
++#ifdef SFP_SERIALID
++	/* the SFP modules each have an i2c bus for serial ident via GSC GPIO
++	 * To use these the i2c-gpio driver must be changed to use the _cansleep
++	 * varients of gpio_get_value/gpio_set_value (I don't know why it doesn't
++	 * use that anyway as it doesn't operate in an IRQ context).
++	 * Additionally the i2c-gpio module must set the gpio to output-high prior
++	 * to changing direction to an input to enable internal Pullups
++	 */
++	platform_device_register(&cambria_i2c_gpio_sfpa);
++	platform_device_register(&cambria_i2c_gpio_sfpb);
++#endif
++
++	/* gpio config (/sys/class/gpio) */
++	cambria_register_gpio(ARRAY_AND_SIZE(cambria_gpios_gw2360));
++}
++
++static struct cambria_board_info cambria_boards[] __initdata = {
++	{
++		.model	= "GW2350",
++		.setup	= cambria_gw2350_setup,
++	}, {
++		.model	= "GW2351",
++		.setup	= cambria_gw2350_setup,
++	}, {
++		.model	= "GW2358",
++		.setup	= cambria_gw2358_setup,
++	}, {
++		.model	= "GW2359",
++		.setup	= cambria_gw2359_setup,
++	}, {
++		.model	= "GW2360",
++		.setup	= cambria_gw2360_setup,
++	}, {
++		.model	= "GW2371",
++		.setup	= cambria_gw2358_setup,
++	}
++};
++
++static struct cambria_board_info * __init cambria_find_board_info(char *model)
++{
++	int i;
++	model[6] = '\0';
++
++	for (i = 0; i < ARRAY_SIZE(cambria_boards); i++) {
++		struct cambria_board_info *info = &cambria_boards[i];
++		if (strcmp(info->model, model) == 0)
++			return info;
++	}
++
++	return NULL;
++}
++
++static struct memory_accessor *at24_mem_acc;
++
++static void at24_setup(struct memory_accessor *mem_acc, void *context)
++{
++	char mac_addr[ETH_ALEN];
++	char model[7];
++
++	at24_mem_acc = mem_acc;
++
++	/* Read MAC addresses */
++	if (at24_mem_acc->read(at24_mem_acc, mac_addr, 0x0, 6) == 6) {
++		memcpy(&cambria_npec_data.hwaddr, mac_addr, ETH_ALEN);
++	}
++	if (at24_mem_acc->read(at24_mem_acc, mac_addr, 0x6, 6) == 6) {
++		memcpy(&cambria_npea_data.hwaddr, mac_addr, ETH_ALEN);
++	}
++
++	/* Read the first 6 bytes of the model number */
++	if (at24_mem_acc->read(at24_mem_acc, model, 0x20, 6) == 6) {
++		cambria_info = cambria_find_board_info(model);
++	}
++
++}
++
++static struct at24_platform_data cambria_eeprom_info = {
++	.byte_len	= 1024,
++	.page_size	= 16,
++	.flags		= AT24_FLAG_READONLY,
++	.setup		= at24_setup,
++};
++
++static struct pca953x_platform_data cambria_pca_data = {
++	.gpio_base = 100,
++	.irq_base = -1,
++};
++
++static struct pca953x_platform_data cambria_pca2_data = {
++	.gpio_base = 116,
++	.irq_base = -1,
++};
++
++static struct i2c_board_info __initdata cambria_i2c_board_info[] = {
++	{
++		I2C_BOARD_INFO("pca9555", 0x23),
++		.platform_data = &cambria_pca_data,
++	},
++	{
++		I2C_BOARD_INFO("pca9555", 0x27),
++		.platform_data = &cambria_pca2_data,
++	},
++	{
++		I2C_BOARD_INFO("ds1672", 0x68),
++	},
++	{
++		I2C_BOARD_INFO("gsp", 0x29),
++	},
++	{
++		I2C_BOARD_INFO("ad7418", 0x28),
++	},
++	{
++		I2C_BOARD_INFO("24c08", 0x51),
++		.platform_data	= &cambria_eeprom_info
++	},
++	{
++		I2C_BOARD_INFO("gw_i2c_pld", 0x56),
++		.platform_data	= &gw_i2c_pld_data0,
++	},
++	{
++		I2C_BOARD_INFO("gw_i2c_pld", 0x57),
++		.platform_data	= &gw_i2c_pld_data1,
++	},
++};
++
++static void __init cambria_init(void)
++{
++	ixp4xx_sys_init();
++
++	cambria_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
++	cambria_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + SZ_32M - 1;
++
++	*IXP4XX_EXP_CS0 |= IXP4XX_FLASH_WRITABLE; // make sure window is writable
++	*IXP4XX_EXP_CS1 = *IXP4XX_EXP_CS0;
++
++	platform_add_devices(ARRAY_AND_SIZE(cambria_devices));
++
++	cambria_pata_resources[0].start = 0x53e00000;
++	cambria_pata_resources[0].end = 0x53e3ffff;
++
++	cambria_pata_resources[1].start = 0x53e40000;
++	cambria_pata_resources[1].end = 0x53e7ffff;
++
++	cambria_pata_data.cs0_cfg = IXP4XX_EXP_CS3;
++	cambria_pata_data.cs1_cfg = IXP4XX_EXP_CS3;
++
++	i2c_register_board_info(0, ARRAY_AND_SIZE(cambria_i2c_board_info));
++}
++
++static int __init cambria_model_setup(void)
++{
++	if (!machine_is_cambria())
++		return 0;
++
++	if (cambria_info) {
++		printk(KERN_DEBUG "Running on Gateworks Cambria %s\n",
++				cambria_info->model);
++		cambria_info->setup();
++	} else {
++		printk(KERN_INFO "Unknown/missing Cambria model number"
++				" -- defaults will be used\n");
++		cambria_gw23xx_setup();
++	}
++
++	return 0;
++}
++late_initcall(cambria_model_setup);
++
++MACHINE_START(CAMBRIA, "Gateworks Cambria series")
++	/* Maintainer: Imre Kaloz <kaloz@openwrt.org> */
++	.map_io		= ixp4xx_map_io,
++	.init_irq	= ixp4xx_init_irq,
++	.init_time	= ixp4xx_timer_init,
++	.atag_offset	= 0x0100,
++	.init_machine	= cambria_init,
++#if defined(CONFIG_PCI)
++	.dma_zone_size	= SZ_64M,
++#endif
++	.restart	= ixp4xx_restart,
++MACHINE_END
diff --git a/target/linux/ixp4xx/patches-3.18/201-npe_driver_print_license_location.patch b/target/linux/ixp4xx/patches-3.18/201-npe_driver_print_license_location.patch
new file mode 100644
index 0000000..f46b9c6
--- /dev/null
+++ b/target/linux/ixp4xx/patches-3.18/201-npe_driver_print_license_location.patch
@@ -0,0 +1,11 @@
+--- a/arch/arm/mach-ixp4xx/ixp4xx_npe.c
++++ b/arch/arm/mach-ixp4xx/ixp4xx_npe.c
+@@ -586,6 +586,8 @@ int npe_load_firmware(struct npe *npe, c
+ 	npe_reset(npe);
+ #endif
+ 
++	print_npe(KERN_INFO, npe, "firmware's license can be found in /usr/share/doc/LICENSE.IPL\n");
++
+ 	print_npe(KERN_INFO, npe, "firmware functionality 0x%X, "
+ 		  "revision 0x%X:%X\n", (image->id >> 16) & 0xFF,
+ 		  (image->id >> 8) & 0xFF, image->id & 0xFF);
diff --git a/target/linux/ixp4xx/patches-3.18/203-npe_driver_mask_phy_features.patch b/target/linux/ixp4xx/patches-3.18/203-npe_driver_mask_phy_features.patch
new file mode 100644
index 0000000..359873d
--- /dev/null
+++ b/target/linux/ixp4xx/patches-3.18/203-npe_driver_mask_phy_features.patch
@@ -0,0 +1,13 @@
+--- a/drivers/net/ethernet/xscale/ixp4xx_eth.c
++++ b/drivers/net/ethernet/xscale/ixp4xx_eth.c
+@@ -1474,6 +1474,10 @@ static int eth_init_one(struct platform_
+ 		goto err_free_mem;
+ 	}
+ 
++	/* mask with MAC supported features */
++	port->phydev->supported &= PHY_BASIC_FEATURES;
++	port->phydev->advertising = port->phydev->supported;
++
+ 	port->phydev->irq = PHY_POLL;
+ 
+ 	if ((err = register_netdev(dev)))
diff --git a/target/linux/ixp4xx/patches-3.18/205-npe_driver_separate_phy_functions.patch b/target/linux/ixp4xx/patches-3.18/205-npe_driver_separate_phy_functions.patch
new file mode 100644
index 0000000..6d1eb7b
--- /dev/null
+++ b/target/linux/ixp4xx/patches-3.18/205-npe_driver_separate_phy_functions.patch
@@ -0,0 +1,131 @@
+From e3eab80fb5d0a7d7fdb0f2f231b27161d5ec3804 Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jogo@openwrt.org>
+Date: Sun, 30 Jun 2013 15:52:53 +0200
+Subject: [PATCH 23/36] 205-npe_driver_separate_phy_functions.patch
+
+---
+ drivers/net/ethernet/xscale/ixp4xx_eth.c |   70 ++++++++++++++++++++++--------
+ 1 file changed, 51 insertions(+), 19 deletions(-)
+
+--- a/drivers/net/ethernet/xscale/ixp4xx_eth.c
++++ b/drivers/net/ethernet/xscale/ixp4xx_eth.c
+@@ -589,6 +589,51 @@ static void ixp4xx_adjust_link(struct ne
+ 	       dev->name, port->speed, port->duplex ? "full" : "half");
+ }
+ 
++static int ixp4xx_phy_connect(struct net_device *dev)
++{
++	struct port *port = netdev_priv(dev);
++	struct eth_plat_info *plat = port->plat;
++	char phy_id[MII_BUS_ID_SIZE + 3];
++
++	snprintf(phy_id, MII_BUS_ID_SIZE + 3, PHY_ID_FMT,
++		mdio_bus->id, plat->phy);
++	port->phydev = phy_connect(dev, phy_id, &ixp4xx_adjust_link,
++				   PHY_INTERFACE_MODE_MII);
++	if (IS_ERR(port->phydev)) {
++		printk(KERN_ERR "%s: Could not attach to PHY\n", dev->name);
++		return PTR_ERR(port->phydev);
++	}
++
++	/* mask with MAC supported features */
++	port->phydev->supported &= PHY_BASIC_FEATURES;
++	port->phydev->advertising = port->phydev->supported;
++
++	port->phydev->irq = PHY_POLL;
++
++	return 0;
++}
++
++static void ixp4xx_phy_disconnect(struct net_device *dev)
++{
++	struct port *port = netdev_priv(dev);
++
++	phy_disconnect(port->phydev);
++}
++
++static void ixp4xx_phy_start(struct net_device *dev)
++{
++	struct port *port = netdev_priv(dev);
++
++	port->speed = 0;	/* force "link up" message */
++	phy_start(port->phydev);
++}
++
++static void ixp4xx_phy_stop(struct net_device *dev)
++{
++	struct port *port = netdev_priv(dev);
++
++	phy_stop(port->phydev);
++}
+ 
+ static inline void debug_pkt(struct net_device *dev, const char *func,
+ 			     u8 *data, int len)
+@@ -1259,8 +1304,7 @@ static int eth_open(struct net_device *d
+ 		return err;
+ 	}
+ 
+-	port->speed = 0;	/* force "link up" message */
+-	phy_start(port->phydev);
++	ixp4xx_phy_start(dev);
+ 
+ 	for (i = 0; i < ETH_ALEN; i++)
+ 		__raw_writel(dev->dev_addr[i], &port->regs->hw_addr[i]);
+@@ -1381,7 +1425,7 @@ static int eth_close(struct net_device *
+ 		printk(KERN_CRIT "%s: unable to disable loopback\n",
+ 		       dev->name);
+ 
+-	phy_stop(port->phydev);
++	ixp4xx_phy_stop(dev);
+ 
+ 	if (!ports_open)
+ 		qmgr_disable_irq(TXDONE_QUEUE);
+@@ -1407,7 +1451,6 @@ static int eth_init_one(struct platform_
+ 	struct net_device *dev;
+ 	struct eth_plat_info *plat = dev_get_platdata(&pdev->dev);
+ 	u32 regs_phys;
+-	char phy_id[MII_BUS_ID_SIZE + 3];
+ 	int err;
+ 
+ 	if (!(dev = alloc_etherdev(sizeof(struct port))))
+@@ -1465,20 +1508,9 @@ static int eth_init_one(struct platform_
+ 	__raw_writel(DEFAULT_CORE_CNTRL, &port->regs->core_control);
+ 	udelay(50);
+ 
+-	snprintf(phy_id, MII_BUS_ID_SIZE + 3, PHY_ID_FMT,
+-		mdio_bus->id, plat->phy);
+-	port->phydev = phy_connect(dev, phy_id, &ixp4xx_adjust_link,
+-				   PHY_INTERFACE_MODE_MII);
+-	if (IS_ERR(port->phydev)) {
+-		err = PTR_ERR(port->phydev);
++	err = ixp4xx_phy_connect(dev);
++	if (err)
+ 		goto err_free_mem;
+-	}
+-
+-	/* mask with MAC supported features */
+-	port->phydev->supported &= PHY_BASIC_FEATURES;
+-	port->phydev->advertising = port->phydev->supported;
+-
+-	port->phydev->irq = PHY_POLL;
+ 
+ 	if ((err = register_netdev(dev)))
+ 		goto err_phy_dis;
+@@ -1489,7 +1521,7 @@ static int eth_init_one(struct platform_
+ 	return 0;
+ 
+ err_phy_dis:
+-	phy_disconnect(port->phydev);
++	ixp4xx_phy_disconnect(dev);
+ err_free_mem:
+ 	npe_port_tab[NPE_ID(port->id)] = NULL;
+ 	release_resource(port->mem_res);
+@@ -1506,7 +1538,7 @@ static int eth_remove_one(struct platfor
+ 	struct port *port = netdev_priv(dev);
+ 
+ 	unregister_netdev(dev);
+-	phy_disconnect(port->phydev);
++	ixp4xx_phy_disconnect(dev);
+ 	npe_port_tab[NPE_ID(port->id)] = NULL;
+ 	npe_release(port->npe);
+ 	release_resource(port->mem_res);
diff --git a/target/linux/ixp4xx/patches-3.18/206-npe_driver_add_update_link_function.patch b/target/linux/ixp4xx/patches-3.18/206-npe_driver_add_update_link_function.patch
new file mode 100644
index 0000000..f1a7707
--- /dev/null
+++ b/target/linux/ixp4xx/patches-3.18/206-npe_driver_add_update_link_function.patch
@@ -0,0 +1,98 @@
+--- a/drivers/net/ethernet/xscale/ixp4xx_eth.c
++++ b/drivers/net/ethernet/xscale/ixp4xx_eth.c
+@@ -177,7 +177,7 @@ struct port {
+ 	struct desc *desc_tab;	/* coherent */
+ 	u32 desc_tab_phys;
+ 	int id;			/* logical port ID */
+-	int speed, duplex;
++	int link, speed, duplex;
+ 	u8 firmware[4];
+ 	int hwts_tx_en;
+ 	int hwts_rx_en;
+@@ -558,37 +558,52 @@ static void ixp4xx_mdio_remove(void)
+ 	mdiobus_free(mdio_bus);
+ }
+ 
+-
+-static void ixp4xx_adjust_link(struct net_device *dev)
++static void ixp4xx_update_link(struct net_device *dev)
+ {
+ 	struct port *port = netdev_priv(dev);
+-	struct phy_device *phydev = port->phydev;
+ 
+-	if (!phydev->link) {
+-		if (port->speed) {
+-			port->speed = 0;
+-			printk(KERN_INFO "%s: link down\n", dev->name);
+-		}
++	if (!port->link) {
++		netif_carrier_off(dev);
++		printk(KERN_INFO "%s: link down\n", dev->name);
+ 		return;
+ 	}
+ 
+-	if (port->speed == phydev->speed && port->duplex == phydev->duplex)
+-		return;
+-
+-	port->speed = phydev->speed;
+-	port->duplex = phydev->duplex;
+-
+-	if (port->duplex)
++	if (port->duplex == DUPLEX_FULL)
+ 		__raw_writel(DEFAULT_TX_CNTRL0 & ~TX_CNTRL0_HALFDUPLEX,
+ 			     &port->regs->tx_control[0]);
+ 	else
+ 		__raw_writel(DEFAULT_TX_CNTRL0 | TX_CNTRL0_HALFDUPLEX,
+ 			     &port->regs->tx_control[0]);
+ 
++	netif_carrier_on(dev);
+ 	printk(KERN_INFO "%s: link up, speed %u Mb/s, %s duplex\n",
+ 	       dev->name, port->speed, port->duplex ? "full" : "half");
+ }
+ 
++static void ixp4xx_adjust_link(struct net_device *dev)
++{
++	struct port *port = netdev_priv(dev);
++	struct phy_device *phydev = port->phydev;
++	int status_change = 0;
++
++	if (phydev->link) {
++		if (port->duplex != phydev->duplex
++		    || port->speed != phydev->speed) {
++			status_change = 1;
++		}
++	}
++
++	if (phydev->link != port->link)
++		status_change = 1;
++
++	port->link = phydev->link;
++	port->speed = phydev->speed;
++	port->duplex = phydev->duplex;
++
++	if (status_change)
++		ixp4xx_update_link(dev);
++}
++
+ static int ixp4xx_phy_connect(struct net_device *dev)
+ {
+ 	struct port *port = netdev_priv(dev);
+@@ -624,7 +639,6 @@ static void ixp4xx_phy_start(struct net_
+ {
+ 	struct port *port = netdev_priv(dev);
+ 
+-	port->speed = 0;	/* force "link up" message */
+ 	phy_start(port->phydev);
+ }
+ 
+@@ -1515,6 +1529,10 @@ static int eth_init_one(struct platform_
+ 	if ((err = register_netdev(dev)))
+ 		goto err_phy_dis;
+ 
++	port->link = 0;
++	port->speed = 0;
++	port->duplex = -1;
++
+ 	printk(KERN_INFO "%s: MII PHY %i on %s\n", dev->name, plat->phy,
+ 	       npe_name(port->npe));
+ 
diff --git a/target/linux/ixp4xx/patches-3.18/207-npe_driver_multiphy_support.patch b/target/linux/ixp4xx/patches-3.18/207-npe_driver_multiphy_support.patch
new file mode 100644
index 0000000..32035ab
--- /dev/null
+++ b/target/linux/ixp4xx/patches-3.18/207-npe_driver_multiphy_support.patch
@@ -0,0 +1,154 @@
+TODO: take care of additional PHYs through the PHY abstraction layer
+
+--- a/arch/arm/mach-ixp4xx/include/mach/platform.h
++++ b/arch/arm/mach-ixp4xx/include/mach/platform.h
+@@ -74,7 +74,7 @@ extern unsigned long ixp4xx_exp_bus_size
+ /*
+  * Clock Speed Definitions.
+  */
+-#define IXP4XX_PERIPHERAL_BUS_CLOCK 	(66) /* 66Mhzi APB BUS   */ 
++#define IXP4XX_PERIPHERAL_BUS_CLOCK 	(66) /* 66Mhzi APB BUS   */
+ #define IXP4XX_UART_XTAL        	14745600
+ 
+ /*
+@@ -95,12 +95,23 @@ struct ixp4xx_pata_data {
+ #define IXP4XX_ETH_NPEB		0x10
+ #define IXP4XX_ETH_NPEC		0x20
+ 
++#define IXP4XX_ETH_PHY_MAX_ADDR	32
++
+ /* Information about built-in Ethernet MAC interfaces */
+ struct eth_plat_info {
+ 	u8 phy;		/* MII PHY ID, 0 - 31 */
+ 	u8 rxq;		/* configurable, currently 0 - 31 only */
+ 	u8 txreadyq;
+ 	u8 hwaddr[6];
++
++	u32 phy_mask;
++#if 0
++	int speed;
++	int duplex;
++#else
++	int speed_10;
++	int half_duplex;
++#endif
+ };
+ 
+ /* Information about built-in HSS (synchronous serial) interfaces */
+--- a/drivers/net/ethernet/xscale/ixp4xx_eth.c
++++ b/drivers/net/ethernet/xscale/ixp4xx_eth.c
+@@ -610,6 +610,37 @@ static int ixp4xx_phy_connect(struct net
+ 	struct eth_plat_info *plat = port->plat;
+ 	char phy_id[MII_BUS_ID_SIZE + 3];
+ 
++	if (plat->phy == IXP4XX_ETH_PHY_MAX_ADDR) {
++#if 0
++		switch (plat->speed) {
++		case SPEED_10:
++		case SPEED_100:
++			break;
++		default:
++			printk(KERN_ERR "%s: invalid speed (%d)\n",
++					dev->name, plat->speed);
++			return -EINVAL;
++		}
++
++		switch (plat->duplex) {
++		case DUPLEX_HALF:
++		case DUPLEX_FULL:
++			break;
++		default:
++			printk(KERN_ERR "%s: invalid duplex mode (%d)\n",
++					dev->name, plat->duplex);
++			return -EINVAL;
++		}
++		port->speed = plat->speed;
++		port->duplex = plat->duplex;
++#else
++		port->speed = plat->speed_10 ? SPEED_10 : SPEED_100;
++		port->duplex = plat->half_duplex ? DUPLEX_HALF : DUPLEX_FULL;
++#endif
++
++		return 0;
++	}
++
+ 	snprintf(phy_id, MII_BUS_ID_SIZE + 3, PHY_ID_FMT,
+ 		mdio_bus->id, plat->phy);
+ 	port->phydev = phy_connect(dev, phy_id, &ixp4xx_adjust_link,
+@@ -632,21 +663,32 @@ static void ixp4xx_phy_disconnect(struct
+ {
+ 	struct port *port = netdev_priv(dev);
+ 
+-	phy_disconnect(port->phydev);
++	if (port->phydev)
++		phy_disconnect(port->phydev);
+ }
+ 
+ static void ixp4xx_phy_start(struct net_device *dev)
+ {
+ 	struct port *port = netdev_priv(dev);
+ 
+-	phy_start(port->phydev);
++	if (port->phydev) {
++		phy_start(port->phydev);
++	} else {
++		port->link = 1;
++		ixp4xx_update_link(dev);
++	}
+ }
+ 
+ static void ixp4xx_phy_stop(struct net_device *dev)
+ {
+ 	struct port *port = netdev_priv(dev);
+ 
+-	phy_stop(port->phydev);
++	if (port->phydev) {
++		phy_stop(port->phydev);
++	} else {
++		port->link = 0;
++		ixp4xx_update_link(dev);
++	}
+ }
+ 
+ static inline void debug_pkt(struct net_device *dev, const char *func,
+@@ -1048,6 +1090,9 @@ static int eth_ioctl(struct net_device *
+ 			return hwtstamp_get(dev, req);
+ 	}
+ 
++	if (!port->phydev)
++		return -EOPNOTSUPP;
++
+ 	return phy_mii_ioctl(port->phydev, req, cmd);
+ }
+ 
+@@ -1068,18 +1113,30 @@ static void ixp4xx_get_drvinfo(struct ne
+ static int ixp4xx_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
+ {
+ 	struct port *port = netdev_priv(dev);
++
++	if (!port->phydev)
++		return -EOPNOTSUPP;
++
+ 	return phy_ethtool_gset(port->phydev, cmd);
+ }
+ 
+ static int ixp4xx_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
+ {
+ 	struct port *port = netdev_priv(dev);
++
++	if (!port->phydev)
++		return -EOPNOTSUPP;
++
+ 	return phy_ethtool_sset(port->phydev, cmd);
+ }
+ 
+ static int ixp4xx_nway_reset(struct net_device *dev)
+ {
+ 	struct port *port = netdev_priv(dev);
++
++	if (!port->phydev)
++		return -EOPNOTSUPP;
++
+ 	return phy_start_aneg(port->phydev);
+ }
+ 
diff --git a/target/linux/ixp4xx/patches-3.18/295-latch_led_driver.patch b/target/linux/ixp4xx/patches-3.18/295-latch_led_driver.patch
new file mode 100644
index 0000000..97d4445
--- /dev/null
+++ b/target/linux/ixp4xx/patches-3.18/295-latch_led_driver.patch
@@ -0,0 +1,201 @@
+--- a/drivers/leds/Kconfig
++++ b/drivers/leds/Kconfig
+@@ -250,6 +250,12 @@ config LEDS_LP8788
+ 	help
+ 	  This option enables support for the Keyboard LEDs on the LP8788 PMIC.
+ 
++config LEDS_LATCH
++	tristate "LED Support for Memory Latched LEDs"
++	depends on LEDS_CLASS
++	help
++		-- To Do --
++
+ config LEDS_CLEVO_MAIL
+ 	tristate "Mail LED on Clevo notebook"
+ 	depends on LEDS_CLASS
+--- a/drivers/leds/Makefile
++++ b/drivers/leds/Makefile
+@@ -21,6 +21,7 @@ obj-$(CONFIG_LEDS_SUNFIRE)		+= leds-sunf
+ obj-$(CONFIG_LEDS_PCA9532)		+= leds-pca9532.o
+ obj-$(CONFIG_LEDS_GPIO_REGISTER)	+= leds-gpio-register.o
+ obj-$(CONFIG_LEDS_GPIO)			+= leds-gpio.o
++obj-$(CONFIG_LEDS_LATCH)		+= leds-latch.o
+ obj-$(CONFIG_LEDS_LP3944)		+= leds-lp3944.o
+ obj-$(CONFIG_LEDS_LP55XX_COMMON)	+= leds-lp55xx-common.o
+ obj-$(CONFIG_LEDS_LP5521)		+= leds-lp5521.o
+--- /dev/null
++++ b/drivers/leds/leds-latch.c
+@@ -0,0 +1,152 @@
++/*
++ * LEDs driver for Memory Latched Devices
++ *
++ * Copyright (C) 2008 Gateworks Corp.
++ * Chris Lang <clang@gateworks.com>
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ *
++ */
++#include <linux/kernel.h>
++#include <linux/slab.h>
++#include <linux/init.h>
++#include <linux/platform_device.h>
++#include <linux/leds.h>
++#include <linux/workqueue.h>
++#include <asm/io.h>
++#include <linux/spinlock.h>
++#include <linux/slab.h>
++#include <linux/module.h>
++#include <linux/export.h>
++
++static unsigned int mem_keep = 0xFF;
++static spinlock_t mem_lock;
++static unsigned char *iobase;
++
++struct latch_led_data {
++	struct led_classdev cdev;
++	struct work_struct work;
++	u8 new_level;
++	u8 bit;
++	void (*set_led)(u8 bit, enum led_brightness value);
++};
++
++static void latch_set_led(u8 bit, enum led_brightness value)
++{
++	if (value == LED_OFF)
++		mem_keep |= (0x1 << bit);
++	else
++		mem_keep &= ~(0x1 << bit);
++
++	writeb(mem_keep, iobase);
++}
++
++static void latch_led_set(struct led_classdev *led_cdev,
++	enum led_brightness value)
++{
++	struct latch_led_data *led_dat =
++		container_of(led_cdev, struct latch_led_data, cdev);
++
++	raw_spin_lock(mem_lock);
++
++	led_dat->set_led(led_dat->bit, value);
++
++	raw_spin_unlock(mem_lock);
++}
++
++static int latch_led_probe(struct platform_device *pdev)
++{
++	struct latch_led_platform_data *pdata = pdev->dev.platform_data;
++	struct latch_led *cur_led;
++	struct latch_led_data *leds_data, *led_dat;
++	int i, ret = 0;
++
++	if (!pdata)
++		return -EBUSY;
++
++	leds_data = kzalloc(sizeof(struct latch_led_data) * pdata->num_leds,
++				GFP_KERNEL);
++	if (!leds_data)
++		return -ENOMEM;
++
++	for (i = 0; i < pdata->num_leds; i++) {
++		cur_led = &pdata->leds[i];
++		led_dat = &leds_data[i];
++
++		led_dat->cdev.name = cur_led->name;
++		led_dat->cdev.default_trigger = cur_led->default_trigger;
++		led_dat->cdev.brightness_set = latch_led_set;
++		led_dat->cdev.brightness = LED_OFF;
++		led_dat->bit = cur_led->bit;
++		led_dat->set_led = pdata->set_led ? pdata->set_led : latch_set_led;
++
++		ret = led_classdev_register(&pdev->dev, &led_dat->cdev);
++		if (ret < 0) {
++			goto err;
++		}
++	}
++
++	if (!pdata->set_led) {
++		iobase = ioremap_nocache(pdata->mem, 0x1000);
++		writeb(0xFF, iobase);
++	}
++	platform_set_drvdata(pdev, leds_data);
++
++	return 0;
++
++err:
++	if (i > 0) {
++		for (i = i - 1; i >= 0; i--) {
++			led_classdev_unregister(&leds_data[i].cdev);
++		}
++	}
++
++	kfree(leds_data);
++
++	return ret;
++}
++
++static int latch_led_remove(struct platform_device *pdev)
++{
++	int i;
++	struct latch_led_platform_data *pdata = pdev->dev.platform_data;
++	struct latch_led_data *leds_data;
++
++	leds_data = platform_get_drvdata(pdev);
++
++	for (i = 0; i < pdata->num_leds; i++) {
++		led_classdev_unregister(&leds_data[i].cdev);
++		cancel_work_sync(&leds_data[i].work);
++	}
++
++	kfree(leds_data);
++
++	return 0;
++}
++
++static struct platform_driver latch_led_driver = {
++	.probe		= latch_led_probe,
++	.remove		= latch_led_remove,
++	.driver		= {
++		.name	= "leds-latch",
++		.owner	= THIS_MODULE,
++	},
++};
++
++static int __init latch_led_init(void)
++{
++	return platform_driver_register(&latch_led_driver);
++}
++
++static void __exit latch_led_exit(void)
++{
++	platform_driver_unregister(&latch_led_driver);
++}
++
++module_init(latch_led_init);
++module_exit(latch_led_exit);
++
++MODULE_AUTHOR("Chris Lang <clang@gateworks.com>");
++MODULE_DESCRIPTION("Latch LED driver");
+--- a/include/linux/leds.h
++++ b/include/linux/leds.h
+@@ -297,4 +297,18 @@ static inline void ledtrig_cpu(enum cpu_
+ }
+ #endif
+ 
++/* For the leds-latch driver */
++struct latch_led {
++	const char *name;
++	char *default_trigger;
++	unsigned  bit;
++};
++
++struct latch_led_platform_data {
++	int     num_leds;
++	u32     mem;
++	struct latch_led *leds;
++	void	(*set_led)(u8 bit, enum led_brightness value);
++};
++
+ #endif		/* __LINUX_LEDS_H_INCLUDED */
diff --git a/target/linux/ixp4xx/patches-3.18/300-avila_support.patch b/target/linux/ixp4xx/patches-3.18/300-avila_support.patch
new file mode 100644
index 0000000..d2dafaa
--- /dev/null
+++ b/target/linux/ixp4xx/patches-3.18/300-avila_support.patch
@@ -0,0 +1,726 @@
+--- a/arch/arm/mach-ixp4xx/avila-pci.c
++++ b/arch/arm/mach-ixp4xx/avila-pci.c
+@@ -27,8 +27,8 @@
+ #include <mach/hardware.h>
+ #include <asm/mach-types.h>
+ 
+-#define AVILA_MAX_DEV	4
+-#define LOFT_MAX_DEV	6
++#define AVILA_MAX_DEV	6
++
+ #define IRQ_LINES	4
+ 
+ /* PCI controller GPIO to IRQ pin mappings */
+@@ -55,10 +55,8 @@ static int __init avila_map_irq(const st
+ 		IXP4XX_GPIO_IRQ(INTD)
+ 	};
+ 
+-	if (slot >= 1 &&
+-	    slot <= (machine_is_loft() ? LOFT_MAX_DEV : AVILA_MAX_DEV) &&
+-	    pin >= 1 && pin <= IRQ_LINES)
+-		return pci_irq_table[(slot + pin - 2) % 4];
++	if (slot >= 1 && slot <= AVILA_MAX_DEV && pin >= 1 && pin <= IRQ_LINES)
++		return pci_irq_table[(slot + pin - 2) % IRQ_LINES];
+ 
+ 	return -1;
+ }
+--- a/arch/arm/mach-ixp4xx/avila-setup.c
++++ b/arch/arm/mach-ixp4xx/avila-setup.c
+@@ -14,9 +14,16 @@
+ #include <linux/kernel.h>
+ #include <linux/init.h>
+ #include <linux/device.h>
++#include <linux/if_ether.h>
++#include <linux/socket.h>
++#include <linux/netdevice.h>
+ #include <linux/serial.h>
+ #include <linux/tty.h>
+ #include <linux/serial_8250.h>
++#include <linux/i2c.h>
++#include <linux/platform_data/at24.h>
++#include <linux/leds.h>
++#include <linux/platform_data/pca953x.h>
+ #include <linux/i2c-gpio.h>
+ #include <asm/types.h>
+ #include <asm/setup.h>
+@@ -26,10 +33,25 @@
+ #include <asm/irq.h>
+ #include <asm/mach/arch.h>
+ #include <asm/mach/flash.h>
++#include <linux/irq.h>
+ 
+ #define AVILA_SDA_PIN	7
+ #define AVILA_SCL_PIN	6
+ 
++/* User LEDs */
++#define AVILA_GW23XX_LED_USER_GPIO     3
++#define AVILA_GW23X7_LED_USER_GPIO     4
++
++/* gpio mask used by platform device */
++#define AVILA_GPIO_MASK        (1 << 1) | (1 << 3) | (1 << 5) | (1 << 7) | (1 << 9)
++
++struct avila_board_info {
++	unsigned char	*model;
++	void		(*setup)(void);
++};
++
++static struct avila_board_info *avila_info __initdata;
++
+ static struct flash_platform_data avila_flash_data = {
+ 	.map_name	= "cfi_probe",
+ 	.width		= 2,
+@@ -105,14 +127,69 @@ static struct platform_device avila_uart
+ 	.resource		= avila_uart_resources
+ };
+ 
+-static struct resource avila_pata_resources[] = {
++static struct resource avila_optional_uart_resources[] = {
+ 	{
+-		.flags	= IORESOURCE_MEM
+-	},
++		.start  = 0x54000000,
++		.end  = 0x54000fff,
++		.flags  = IORESOURCE_MEM
++	},{
++		.start  = 0x55000000,
++		.end  = 0x55000fff,
++		.flags  = IORESOURCE_MEM
++	},{
++		.start  = 0x56000000,
++		.end  = 0x56000fff,
++		.flags  = IORESOURCE_MEM
++	},{
++		.start  = 0x57000000,
++		.end  = 0x57000fff,
++		.flags  = IORESOURCE_MEM
++	}
++};
++
++static struct plat_serial8250_port avila_optional_uart_data[] = {
+ 	{
+-		.flags	= IORESOURCE_MEM,
++		.flags    = UPF_BOOT_AUTOCONF,
++		.iotype   = UPIO_MEM,
++		.regshift = 0,
++		.uartclk  = 18432000,
++		.rw_delay = 2,
++	},{
++		.flags    = UPF_BOOT_AUTOCONF,
++		.iotype   = UPIO_MEM,
++		.regshift = 0,
++		.uartclk  = 18432000,
++		.rw_delay = 2,
++	},{
++		.flags    = UPF_BOOT_AUTOCONF,
++		.iotype   = UPIO_MEM,
++		.regshift = 0,
++		.uartclk  = 18432000,
++		.rw_delay = 2,
++	},{
++		.flags    = UPF_BOOT_AUTOCONF,
++		.iotype   = UPIO_MEM,
++		.regshift = 0,
++		.uartclk  = 18432000,
++		.rw_delay = 2,
+ 	},
++	{ }
++};
++
++static struct platform_device avila_optional_uart = {
++  .name   = "serial8250",
++  .id   = PLAT8250_DEV_PLATFORM1,
++  .dev.platform_data  = avila_optional_uart_data,
++  .num_resources  = 4,
++  .resource = avila_optional_uart_resources,
++};
++
++static struct resource avila_pata_resources[] = {
+ 	{
++		.flags	= IORESOURCE_MEM
++	},{
++		.flags	= IORESOURCE_MEM,
++	},{
+ 		.name	= "intrq",
+ 		.start	= IRQ_IXP4XX_GPIO12,
+ 		.end	= IRQ_IXP4XX_GPIO12,
+@@ -133,21 +210,237 @@ static struct platform_device avila_pata
+ 	.resource		= avila_pata_resources,
+ };
+ 
++/* Built-in 10/100 Ethernet MAC interfaces */
++static struct eth_plat_info avila_npeb_data = {
++	.phy		= 0,
++	.rxq		= 3,
++	.txreadyq	= 20,
++};
++
++static struct eth_plat_info avila_npec_data = {
++	.phy		= 1,
++	.rxq		= 4,
++	.txreadyq	= 21,
++};
++
++static struct platform_device avila_npeb_device = {
++	.name			= "ixp4xx_eth",
++	.id			= IXP4XX_ETH_NPEB,
++	.dev.platform_data	= &avila_npeb_data,
++	.dev.coherent_dma_mask	= DMA_BIT_MASK(32),
++};
++
++static struct platform_device avila_npec_device = {
++	.name			= "ixp4xx_eth",
++	.id			= IXP4XX_ETH_NPEC,
++	.dev.platform_data	= &avila_npec_data,
++	.dev.coherent_dma_mask	= DMA_BIT_MASK(32),
++};
++
++static struct gpio_led avila_gpio_leds[] = {
++	{
++		.name		= "user",  /* green led */
++		.gpio		= AVILA_GW23XX_LED_USER_GPIO,
++		.active_low	= 1,
++	},
++	{
++		.name		= "radio1",  /* green led */
++		.gpio		= 104,
++		.active_low	= 1,
++	},
++	{
++		.name		= "radio2",  /* green led */
++		.gpio		= 105,
++		.active_low	= 1,
++	},
++	{
++		.name		= "radio3",  /* green led */
++		.gpio		= 106,
++		.active_low	= 1,
++	},
++	{
++		.name		= "radio4",  /* green led */
++		.gpio		= 107,
++		.active_low	= 1,
++	},
++
++};
++
++static struct gpio_led_platform_data avila_gpio_leds_data = {
++	.num_leds		= 1,
++	.leds			= avila_gpio_leds,
++};
++
++static struct platform_device avila_gpio_leds_device = {
++	.name			= "leds-gpio",
++	.id			= -1,
++	.dev.platform_data	= &avila_gpio_leds_data,
++};
++
++static struct latch_led avila_latch_leds[] = {
++	{
++		.name	= "led0",  /* green led */
++		.bit	= 0,
++	},
++	{
++		.name	= "led1",  /* green led */
++		.bit	= 1,
++	},
++	{
++		.name	= "led2",  /* green led */
++		.bit	= 2,
++	},
++	{
++		.name	= "led3",  /* green led */
++		.bit	= 3,
++	},
++	{
++		.name	= "led4",  /* green led */
++		.bit	= 4,
++	},
++	{
++		.name	= "led5",  /* green led */
++		.bit	= 5,
++	},
++	{
++		.name	= "led6",  /* green led */
++		.bit	= 6,
++	},
++	{
++		.name	= "led7",  /* green led */
++		.bit	= 7,
++	}
++};
++
++static struct latch_led_platform_data avila_latch_leds_data = {
++	.num_leds	= 8,
++	.leds		= avila_latch_leds,
++	.mem		= 0x51000000,
++};
++
++static struct platform_device avila_latch_leds_device = {
++	.name			= "leds-latch",
++	.id			= -1,
++	.dev.platform_data	= &avila_latch_leds_data,
++};
++
+ static struct platform_device *avila_devices[] __initdata = {
+ 	&avila_i2c_gpio,
+-	&avila_flash,
+ 	&avila_uart
+ };
+ 
+-static void __init avila_init(void)
++/*
++ * Audio Devices
++ */
++
++static struct platform_device avila_hss_device[] = {
++	{
++		.name = "gw_avila_hss",
++		.id = 0,
++	},{
++		.name = "gw_avila_hss",
++		.id = 1,
++	},{
++		.name = "gw_avila_hss",
++		.id = 2,
++	},{
++		.name = "gw_avila_hss",
++		.id = 3,
++	},
++};
++
++static struct platform_device avila_pcm_device[] = {
++	{
++		.name = "gw_avila-audio",
++		.id = 0,
++	},{
++		.name = "gw_avila-audio",
++		.id = 1,
++	},{
++		.name = "gw_avila-audio",
++		.id = 2,
++	},{
++		.name = "gw_avila-audio",
++		.id = 3,
++	}
++};
++
++static void setup_audio_devices(void) {
++	platform_device_register(&avila_hss_device[0]);
++	platform_device_register(&avila_hss_device[1]);
++	platform_device_register(&avila_hss_device[2]);
++	platform_device_register(&avila_hss_device[3]);
++
++	platform_device_register(&avila_pcm_device[0]);
++	platform_device_register(&avila_pcm_device[1]);
++	platform_device_register(&avila_pcm_device[2]);
++	platform_device_register(&avila_pcm_device[3]);
++}
++
++static void __init avila_gw23xx_setup(void)
+ {
+-	ixp4xx_sys_init();
++	platform_device_register(&avila_npeb_device);
++	platform_device_register(&avila_npec_device);
+ 
+-	avila_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
+-	avila_flash_resource.end =
+-		IXP4XX_EXP_BUS_BASE(0) + ixp4xx_exp_bus_size - 1;
++	platform_device_register(&avila_gpio_leds_device);
++}
+ 
+-	platform_add_devices(avila_devices, ARRAY_SIZE(avila_devices));
++static void __init avila_gw2342_setup(void)
++{
++	platform_device_register(&avila_npeb_device);
++	platform_device_register(&avila_npec_device);
++
++	platform_device_register(&avila_gpio_leds_device);
++
++	avila_pata_resources[0].start = IXP4XX_EXP_BUS_BASE(1);
++	avila_pata_resources[0].end = IXP4XX_EXP_BUS_END(1);
++
++	avila_pata_resources[1].start = IXP4XX_EXP_BUS_BASE(2);
++	avila_pata_resources[1].end = IXP4XX_EXP_BUS_END(2);
++
++	avila_pata_data.cs0_cfg = IXP4XX_EXP_CS1;
++	avila_pata_data.cs1_cfg = IXP4XX_EXP_CS2;
++
++	platform_device_register(&avila_pata);
++}
++
++static void __init avila_gw2345_setup(void)
++{
++	avila_npeb_data.phy = IXP4XX_ETH_PHY_MAX_ADDR;
++	avila_npeb_data.phy_mask = 0x1e; /* ports 1-4 of the KS8995 switch */
++	platform_device_register(&avila_npeb_device);
++
++	avila_npec_data.phy = 5; /* port 5 of the KS8995 switch */
++	platform_device_register(&avila_npec_device);
++
++	platform_device_register(&avila_gpio_leds_device);
++
++	avila_pata_resources[0].start = IXP4XX_EXP_BUS_BASE(1);
++	avila_pata_resources[0].end = IXP4XX_EXP_BUS_END(1);
++
++	avila_pata_resources[1].start = IXP4XX_EXP_BUS_BASE(2);
++	avila_pata_resources[1].end = IXP4XX_EXP_BUS_END(2);
++
++	avila_pata_data.cs0_cfg = IXP4XX_EXP_CS1;
++	avila_pata_data.cs1_cfg = IXP4XX_EXP_CS2;
++
++	platform_device_register(&avila_pata);
++}
++
++static void __init avila_gw2347_setup(void)
++{
++	platform_device_register(&avila_npeb_device);
++
++	avila_gpio_leds[0].gpio = AVILA_GW23X7_LED_USER_GPIO;
++	platform_device_register(&avila_gpio_leds_device);
++}
++
++static void __init avila_gw2348_setup(void)
++{
++	platform_device_register(&avila_npeb_device);
++	platform_device_register(&avila_npec_device);
++
++	platform_device_register(&avila_gpio_leds_device);
+ 
+ 	avila_pata_resources[0].start = IXP4XX_EXP_BUS_BASE(1);
+ 	avila_pata_resources[0].end = IXP4XX_EXP_BUS_END(1);
+@@ -159,8 +452,335 @@ static void __init avila_init(void)
+ 	avila_pata_data.cs1_cfg = IXP4XX_EXP_CS2;
+ 
+ 	platform_device_register(&avila_pata);
++}
++
++static void __init avila_gw2353_setup(void)
++{
++	platform_device_register(&avila_npeb_device);
++	platform_device_register(&avila_gpio_leds_device);
++}
++
++static void __init avila_gw2355_setup(void)
++{
++	avila_npeb_data.phy = IXP4XX_ETH_PHY_MAX_ADDR;
++	avila_npeb_data.phy_mask = 0x1e; /* ports 1-4 of the KS8995 switch */
++	platform_device_register(&avila_npeb_device);
++
++	avila_npec_data.phy = 16;
++	platform_device_register(&avila_npec_device);
++
++	avila_gpio_leds[0].gpio = AVILA_GW23X7_LED_USER_GPIO;
++	platform_device_register(&avila_gpio_leds_device);
++
++	*IXP4XX_EXP_CS4 |= 0xbfff3c03;
++	avila_latch_leds[0].name = "RXD";
++	avila_latch_leds[1].name = "TXD";
++	avila_latch_leds[2].name = "POL";
++	avila_latch_leds[3].name = "LNK";
++	avila_latch_leds[4].name = "ERR";
++	avila_latch_leds_data.num_leds = 5;
++	avila_latch_leds_data.mem = 0x54000000;
++	platform_device_register(&avila_latch_leds_device);
++
++	avila_pata_resources[0].start = IXP4XX_EXP_BUS_BASE(1);
++	avila_pata_resources[0].end = IXP4XX_EXP_BUS_END(1);
++
++	avila_pata_resources[1].start = IXP4XX_EXP_BUS_BASE(2);
++	avila_pata_resources[1].end = IXP4XX_EXP_BUS_END(2);
++
++	avila_pata_data.cs0_cfg = IXP4XX_EXP_CS1;
++	avila_pata_data.cs1_cfg = IXP4XX_EXP_CS2;
++
++	platform_device_register(&avila_pata);
++}
++
++static void __init avila_gw2357_setup(void)
++{
++	platform_device_register(&avila_npeb_device);
++
++	avila_gpio_leds[0].gpio = AVILA_GW23X7_LED_USER_GPIO;
++	platform_device_register(&avila_gpio_leds_device);
++
++	*IXP4XX_EXP_CS1 |= 0xbfff3c03;
++	platform_device_register(&avila_latch_leds_device);
++}
++
++static void __init avila_gw2365_setup(void)
++{
++	avila_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + SZ_32M - 1;
++
++	*IXP4XX_EXP_CS4 = 0xBFFF3C43;
++	irq_set_irq_type(IRQ_IXP4XX_GPIO0, IRQ_TYPE_EDGE_RISING);
++	avila_optional_uart_data[0].mapbase = 0x54000000;
++	avila_optional_uart_data[0].membase = (void __iomem *)ioremap(0x54000000, 0x0fff);
++	avila_optional_uart_data[0].irq   = IRQ_IXP4XX_GPIO0;
++
++	*IXP4XX_EXP_CS5 = 0xBFFF3C43;
++	irq_set_irq_type(IRQ_IXP4XX_GPIO1, IRQ_TYPE_EDGE_RISING);
++	avila_optional_uart_data[1].mapbase = 0x55000000;
++	avila_optional_uart_data[1].membase = (void __iomem *)ioremap(0x55000000, 0x0fff);
++	avila_optional_uart_data[1].irq   = IRQ_IXP4XX_GPIO1;
++
++	*IXP4XX_EXP_CS6 = 0xBFFF3C43;
++	irq_set_irq_type(IRQ_IXP4XX_GPIO2, IRQ_TYPE_EDGE_RISING);
++	avila_optional_uart_data[2].mapbase = 0x56000000;
++	avila_optional_uart_data[2].membase = (void __iomem *)ioremap(0x56000000, 0x0fff);
++	avila_optional_uart_data[2].irq   = IRQ_IXP4XX_GPIO2;
++
++	*IXP4XX_EXP_CS7 = 0xBFFF3C43;
++	irq_set_irq_type(IRQ_IXP4XX_GPIO3, IRQ_TYPE_EDGE_RISING);
++	avila_optional_uart_data[3].mapbase = 0x57000000;
++	avila_optional_uart_data[3].membase = (void __iomem *)ioremap(0x57000000, 0x0fff);
++	avila_optional_uart_data[3].irq   = IRQ_IXP4XX_GPIO3;
++
++	platform_device_register(&avila_optional_uart);
++
++	avila_npeb_data.phy = 1;
++	platform_device_register(&avila_npeb_device);
++
++	avila_npec_data.phy = 2;
++	platform_device_register(&avila_npec_device);
++
++	avila_pata_resources[0].start = IXP4XX_EXP_BUS_BASE(2);
++	avila_pata_resources[0].end = IXP4XX_EXP_BUS_END(2);
++
++	avila_pata_resources[1].start = IXP4XX_EXP_BUS_BASE(3);
++	avila_pata_resources[1].end = IXP4XX_EXP_BUS_END(3);
++
++	avila_pata_data.cs0_cfg = IXP4XX_EXP_CS2;
++	avila_pata_data.cs1_cfg = IXP4XX_EXP_CS3;
++
++	platform_device_register(&avila_pata);
++
++	avila_gpio_leds[0].gpio = 109;
++	avila_gpio_leds_data.num_leds = 5;
++	platform_device_register(&avila_gpio_leds_device);
++
++	setup_audio_devices();
++}
++
++static void __init avila_gw2369_setup(void)
++{
++	avila_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + SZ_32M - 1;
++
++	avila_npeb_data.phy = 1;
++	platform_device_register(&avila_npeb_device);
++
++	avila_npec_data.phy = 2;
++	platform_device_register(&avila_npec_device);
++
++	setup_audio_devices();
++}
++
++static void __init avila_gw2370_setup(void)
++{
++	avila_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + SZ_32M - 1;
++
++	avila_npeb_data.phy = 5;
++	platform_device_register(&avila_npeb_device);
++
++	avila_npec_data.phy = IXP4XX_ETH_PHY_MAX_ADDR;
++	avila_npec_data.phy_mask = 0x1e; /* ports 1-4 of the KS8995 switch */
++	platform_device_register(&avila_npec_device);
++
++	*IXP4XX_EXP_CS2 = 0xBFFF3C43;
++	irq_set_irq_type(IRQ_IXP4XX_GPIO2, IRQ_TYPE_EDGE_RISING);
++	avila_optional_uart_data[0].mapbase = 0x52000000;
++	avila_optional_uart_data[0].membase = (void __iomem *)ioremap(0x52000000, 0x0fff);
++	avila_optional_uart_data[0].irq   = IRQ_IXP4XX_GPIO2;
++
++	*IXP4XX_EXP_CS3 = 0xBFFF3C43;
++	irq_set_irq_type(IRQ_IXP4XX_GPIO3, IRQ_TYPE_EDGE_RISING);
++	avila_optional_uart_data[1].mapbase = 0x53000000;
++	avila_optional_uart_data[1].membase = (void __iomem *)ioremap(0x53000000, 0x0fff);
++	avila_optional_uart_data[1].irq   = IRQ_IXP4XX_GPIO3;
++
++	avila_optional_uart.num_resources = 2;
++
++	platform_device_register(&avila_optional_uart);
++
++	avila_gpio_leds[0].gpio = 101;
++	platform_device_register(&avila_gpio_leds_device);
++
++	setup_audio_devices();
++}
++
++static void __init avila_gw2375_setup(void)
++{
++	avila_npeb_data.phy = 1;
++	platform_device_register(&avila_npeb_device);
++
++	avila_npec_data.phy = 2;
++	platform_device_register(&avila_npec_device);
++
++	*IXP4XX_EXP_CS2 = 0xBFFF3C43;
++	irq_set_irq_type(IRQ_IXP4XX_GPIO10, IRQ_TYPE_EDGE_RISING);
++	avila_optional_uart_data[0].mapbase = 0x52000000;
++	avila_optional_uart_data[0].membase = (void __iomem *)ioremap(0x52000000, 0x0fff);
++	avila_optional_uart_data[0].irq   = IRQ_IXP4XX_GPIO10;
++
++	avila_optional_uart.num_resources = 1;
++
++	platform_device_register(&avila_optional_uart);
++
++	setup_audio_devices();
++}
++
++
++static struct avila_board_info avila_boards[] __initdata = {
++	{
++		.model		= "GW2342",
++		.setup		= avila_gw2342_setup,
++	}, {
++		.model		= "GW2345",
++		.setup		= avila_gw2345_setup,
++	}, {
++		.model		= "GW2347",
++		.setup		= avila_gw2347_setup,
++	}, {
++		.model		= "GW2348",
++		.setup		= avila_gw2348_setup,
++	}, {
++		.model		= "GW2353",
++		.setup		= avila_gw2353_setup,
++	}, {
++		.model		= "GW2355",
++		.setup		= avila_gw2355_setup,
++	}, {
++		.model		= "GW2357",
++		.setup		= avila_gw2357_setup,
++	}, {
++		.model		= "GW2365",
++		.setup		= avila_gw2365_setup,
++	}, {
++		.model		= "GW2369",
++		.setup		= avila_gw2369_setup,
++	}, {
++		.model		= "GW2370",
++		.setup		= avila_gw2370_setup,
++	}, {
++		.model		= "GW2373",
++		.setup		= avila_gw2369_setup,
++	}, {
++		.model		= "GW2375",
++		.setup		= avila_gw2375_setup,
++	}
++};
++
++static struct avila_board_info * __init avila_find_board_info(char *model)
++{
++	int i;
++	model[6] = '\0';
++
++	for (i = 0; i < ARRAY_SIZE(avila_boards); i++) {
++		struct avila_board_info *info = &avila_boards[i];
++		if (strcmp(info->model, model) == 0)
++			return info;
++	}
++
++	return NULL;
++}
++
++static struct memory_accessor *at24_mem_acc;
++
++static void at24_setup(struct memory_accessor *mem_acc, void *context)
++{
++	char mac_addr[ETH_ALEN];
++	char model[7];
++
++	at24_mem_acc = mem_acc;
++
++	/* Read MAC addresses */
++	if (at24_mem_acc->read(at24_mem_acc, mac_addr, 0x0, 6) == 6) {
++		memcpy(&avila_npeb_data.hwaddr, mac_addr, ETH_ALEN);
++	}
++	if (at24_mem_acc->read(at24_mem_acc, mac_addr, 0x6, 6) == 6) {
++		memcpy(&avila_npec_data.hwaddr, mac_addr, ETH_ALEN);
++	}
++
++	/* Read the first 6 bytes of the model number */
++	if (at24_mem_acc->read(at24_mem_acc, model, 0x20, 6) == 6) {
++		avila_info = avila_find_board_info(model);
++	}
++
++}
++
++static struct at24_platform_data avila_eeprom_info = {
++	.byte_len	= 1024,
++	.page_size	= 16,
++//	.flags		= AT24_FLAG_READONLY,
++	.setup		= at24_setup,
++};
++
++static struct pca953x_platform_data avila_pca_data = {
++	.gpio_base  = 100,
++};
++
++static struct i2c_board_info __initdata avila_i2c_board_info[] = {
++	{
++		I2C_BOARD_INFO("ds1672", 0x68),
++	},
++	{
++		I2C_BOARD_INFO("gsp", 0x29),
++	},
++	{
++		I2C_BOARD_INFO("pca9555", 0x23),
++		.platform_data = &avila_pca_data,
++	},
++	{
++		I2C_BOARD_INFO("ad7418", 0x28),
++	},
++	{
++		I2C_BOARD_INFO("24c08", 0x51),
++		.platform_data	= &avila_eeprom_info
++	},
++	{
++		I2C_BOARD_INFO("tlv320aic33", 0x1b),
++	},
++	{
++		I2C_BOARD_INFO("tlv320aic33", 0x1a),
++	},
++	{
++		I2C_BOARD_INFO("tlv320aic33", 0x19),
++	},
++	{
++		I2C_BOARD_INFO("tlv320aic33", 0x18),
++	},
++};
++
++static void __init avila_init(void)
++{
++	ixp4xx_sys_init();
++
++	platform_add_devices(avila_devices, ARRAY_SIZE(avila_devices));
++
++	i2c_register_board_info(0, avila_i2c_board_info,
++			ARRAY_SIZE(avila_i2c_board_info));
++}
++
++static int __init avila_model_setup(void)
++{
++	if (!machine_is_avila())
++		return 0;
++
++	/* default 16MB flash */
++	avila_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
++	avila_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + SZ_16M - 1;
++
++	if (avila_info) {
++		printk(KERN_DEBUG "Running on Gateworks Avila %s\n",
++							avila_info->model);
++		avila_info->setup();
++	} else {
++		printk(KERN_INFO "Unknown/missing Avila model number"
++						" -- defaults will be used\n");
++		avila_gw23xx_setup();
++	}
++	platform_device_register(&avila_flash);
+ 
++	return 0;
+ }
++late_initcall(avila_model_setup);
+ 
+ MACHINE_START(AVILA, "Gateworks Avila Network Platform")
+ 	/* Maintainer: Deepak Saxena <dsaxena@plexity.net> */
diff --git a/target/linux/ixp4xx/patches-3.18/304-ixp4xx_eth_jumboframe.patch b/target/linux/ixp4xx/patches-3.18/304-ixp4xx_eth_jumboframe.patch
new file mode 100644
index 0000000..b16086b
--- /dev/null
+++ b/target/linux/ixp4xx/patches-3.18/304-ixp4xx_eth_jumboframe.patch
@@ -0,0 +1,80 @@
+--- a/drivers/net/ethernet/xscale/ixp4xx_eth.c
++++ b/drivers/net/ethernet/xscale/ixp4xx_eth.c
+@@ -57,7 +57,7 @@
+ 
+ #define POOL_ALLOC_SIZE		(sizeof(struct desc) * (RX_DESCS + TX_DESCS))
+ #define REGS_SIZE		0x1000
+-#define MAX_MRU			1536 /* 0x600 */
++#define MAX_MRU			(14320 - ETH_HLEN - ETH_FCS_LEN)
+ #define RX_BUFF_SIZE		ALIGN((NET_IP_ALIGN) + MAX_MRU, 4)
+ 
+ #define NAPI_WEIGHT		16
+@@ -1315,6 +1315,32 @@ static void destroy_queues(struct port *
+ 	}
+ }
+ 
++static int eth_do_change_mtu(struct net_device *dev, int mtu)
++{
++	struct port *port;
++	struct msg msg;
++	/* adjust for ethernet headers */
++	int framesize = mtu + ETH_HLEN + ETH_FCS_LEN;
++
++	port = netdev_priv(dev);
++
++	memset(&msg, 0, sizeof(msg));
++	msg.cmd = NPE_SETMAXFRAMELENGTHS;
++	msg.eth_id = port->id;
++
++	/* max rx/tx 64 byte blocks */
++	msg.byte2 = ((framesize + 63) / 64) << 8;
++	msg.byte3 = ((framesize + 63) / 64) << 8;
++
++	msg.byte4 = msg.byte6 = framesize >> 8;
++	msg.byte5 = msg.byte7 = framesize & 0xff;
++
++	if (npe_send_recv_message(port->npe, &msg, "ETH_SET_MAX_FRAME_LENGTH"))
++		return -EIO;
++
++	return 0;
++}
++
+ static int eth_open(struct net_device *dev)
+ {
+ 	struct port *port = netdev_priv(dev);
+@@ -1366,6 +1392,8 @@ static int eth_open(struct net_device *d
+ 	if (npe_send_recv_message(port->npe, &msg, "ETH_SET_FIREWALL_MODE"))
+ 		return -EIO;
+ 
++	eth_do_change_mtu(dev, dev->mtu);
++
+ 	if ((err = request_queues(port)) != 0)
+ 		return err;
+ 
+@@ -1505,7 +1533,26 @@ static int eth_close(struct net_device *
+ 	return 0;
+ }
+ 
++static int ixp_eth_change_mtu(struct net_device *dev, int mtu)
++{
++	int ret;
++
++	if (mtu > MAX_MRU)
++		return -EINVAL;
++
++	if (dev->flags & IFF_UP) {
++		ret = eth_do_change_mtu(dev, mtu);
++		if (ret < 0)
++			return ret;
++	}
++
++	dev->mtu = mtu;
++
++	return 0;
++}
++
+ static const struct net_device_ops ixp4xx_netdev_ops = {
++	.ndo_change_mtu = ixp_eth_change_mtu,
+ 	.ndo_open = eth_open,
+ 	.ndo_stop = eth_close,
+ 	.ndo_start_xmit = eth_xmit,
diff --git a/target/linux/ixp4xx/patches-3.18/310-gtwx5717_spi_bus.patch b/target/linux/ixp4xx/patches-3.18/310-gtwx5717_spi_bus.patch
new file mode 100644
index 0000000..080b96a
--- /dev/null
+++ b/target/linux/ixp4xx/patches-3.18/310-gtwx5717_spi_bus.patch
@@ -0,0 +1,52 @@
+--- a/arch/arm/mach-ixp4xx/gtwx5715-setup.c
++++ b/arch/arm/mach-ixp4xx/gtwx5715-setup.c
+@@ -27,6 +27,7 @@
+ #include <linux/serial.h>
+ #include <linux/tty.h>
+ #include <linux/serial_8250.h>
++#include <linux/spi/spi_gpio_old.h>
+ #include <asm/types.h>
+ #include <asm/setup.h>
+ #include <asm/memory.h>
+@@ -146,9 +147,41 @@ static struct platform_device gtwx5715_f
+ 	.resource	= &gtwx5715_flash_resource,
+ };
+ 
++static int gtwx5715_spi_boardinfo_setup(struct spi_board_info *bi,
++		struct spi_master *master, void *data)
++{
++
++	strlcpy(bi->modalias, "spi-ks8995", sizeof(bi->modalias));
++
++	bi->max_speed_hz = 5000000 /* Hz */;
++	bi->bus_num = master->bus_num;
++	bi->mode = SPI_MODE_0;
++
++	return 0;
++}
++
++static struct spi_gpio_platform_data gtwx5715_spi_bus_data = {
++	.pin_cs			= GTWX5715_KSSPI_SELECT,
++	.pin_clk		= GTWX5715_KSSPI_CLOCK,
++	.pin_miso		= GTWX5715_KSSPI_RXD,
++	.pin_mosi		= GTWX5715_KSSPI_TXD,
++	.cs_activelow		= 1,
++	.no_spi_delay		= 1,
++	.boardinfo_setup	= gtwx5715_spi_boardinfo_setup,
++};
++
++static struct platform_device gtwx5715_spi_bus = {
++	.name		= "spi-gpio",
++	.id		= 0,
++	.dev		= {
++		.platform_data = &gtwx5715_spi_bus_data,
++	},
++};
++
+ static struct platform_device *gtwx5715_devices[] __initdata = {
+ 	&gtwx5715_uart_device,
+ 	&gtwx5715_flash,
++	&gtwx5715_spi_bus,
+ };
+ 
+ static void __init gtwx5715_init(void)
diff --git a/target/linux/ixp4xx/patches-3.18/311-gtwx5717_mac_plat_info.patch b/target/linux/ixp4xx/patches-3.18/311-gtwx5717_mac_plat_info.patch
new file mode 100644
index 0000000..aa7a9e0
--- /dev/null
+++ b/target/linux/ixp4xx/patches-3.18/311-gtwx5717_mac_plat_info.patch
@@ -0,0 +1,50 @@
+--- a/arch/arm/mach-ixp4xx/gtwx5715-setup.c
++++ b/arch/arm/mach-ixp4xx/gtwx5715-setup.c
+@@ -28,6 +28,7 @@
+ #include <linux/tty.h>
+ #include <linux/serial_8250.h>
+ #include <linux/spi/spi_gpio_old.h>
++#include <linux/dma-mapping.h>
+ #include <asm/types.h>
+ #include <asm/setup.h>
+ #include <asm/memory.h>
+@@ -178,10 +179,39 @@ static struct platform_device gtwx5715_s
+ 	},
+ };
+ 
++static struct eth_plat_info gtwx5715_npeb_data = {
++	.phy		= IXP4XX_ETH_PHY_MAX_ADDR,
++	.phy_mask	= 0x1e, /* ports 1-4 of the KS8995 switch */
++	.rxq		= 3,
++	.txreadyq	= 20,
++};
++
++static struct eth_plat_info gtwx5715_npec_data = {
++	.phy		= 5,	/* port 5 of the KS8995 switch */
++	.rxq		= 4,
++	.txreadyq	= 21,
++};
++
++static struct platform_device gtwx5715_npeb_device = {
++	.name			= "ixp4xx_eth",
++	.id			= IXP4XX_ETH_NPEB,
++	.dev.platform_data	= &gtwx5715_npeb_data,
++	.dev.coherent_dma_mask	= DMA_BIT_MASK(32),
++};
++
++static struct platform_device gtwx5715_npec_device = {
++	.name			= "ixp4xx_eth",
++	.id			= IXP4XX_ETH_NPEC,
++	.dev.platform_data	= &gtwx5715_npec_data,
++	.dev.coherent_dma_mask	= DMA_BIT_MASK(32),
++};
++
+ static struct platform_device *gtwx5715_devices[] __initdata = {
+ 	&gtwx5715_uart_device,
+ 	&gtwx5715_flash,
+ 	&gtwx5715_spi_bus,
++	&gtwx5715_npeb_device,
++	&gtwx5715_npec_device,
+ };
+ 
+ static void __init gtwx5715_init(void)
diff --git a/target/linux/ixp4xx/patches-3.18/312-ixp4xx_pata_optimization.patch b/target/linux/ixp4xx/patches-3.18/312-ixp4xx_pata_optimization.patch
new file mode 100644
index 0000000..59c2837
--- /dev/null
+++ b/target/linux/ixp4xx/patches-3.18/312-ixp4xx_pata_optimization.patch
@@ -0,0 +1,137 @@
+--- a/drivers/ata/pata_ixp4xx_cf.c
++++ b/drivers/ata/pata_ixp4xx_cf.c
+@@ -24,16 +24,58 @@
+ #include <scsi/scsi_host.h>
+ 
+ #define DRV_NAME	"pata_ixp4xx_cf"
+-#define DRV_VERSION	"0.2"
++#define DRV_VERSION	"0.3"
+ 
+ static int ixp4xx_set_mode(struct ata_link *link, struct ata_device **error)
+ {
++	struct ixp4xx_pata_data *data = link->ap->host->dev->platform_data;
++	unsigned int pio_mask;
+ 	struct ata_device *dev;
+ 
+ 	ata_for_each_dev(dev, link, ENABLED) {
+-		ata_dev_info(dev, "configured for PIO0\n");
+-		dev->pio_mode = XFER_PIO_0;
+-		dev->xfer_mode = XFER_PIO_0;
++		if (dev->id[ATA_ID_FIELD_VALID] & (1 << 1)) {
++			pio_mask = dev->id[ATA_ID_PIO_MODES] & 0x03;
++			if (pio_mask & (1 << 1)) {
++				pio_mask = 4;
++			} else {
++				pio_mask = 3;
++			}
++		} else {
++			pio_mask = (dev->id[ATA_ID_OLD_PIO_MODES] >> 8);
++		}
++
++		switch (pio_mask){
++			case 0:
++				ata_dev_printk(dev, KERN_INFO, "configured for PIO0\n");
++				dev->pio_mode = XFER_PIO_0;
++				dev->xfer_mode = XFER_PIO_0;
++				*data->cs0_cfg = 0x8a473c03;
++				break;
++			case 1:
++				ata_dev_printk(dev, KERN_INFO, "configured for PIO1\n");
++				dev->pio_mode = XFER_PIO_1;
++				dev->xfer_mode = XFER_PIO_1;
++				*data->cs0_cfg = 0x86433c03;
++				break;
++			case 2:
++				ata_dev_printk(dev, KERN_INFO, "configured for PIO2\n");
++				dev->pio_mode = XFER_PIO_2;
++				dev->xfer_mode = XFER_PIO_2;
++				*data->cs0_cfg = 0x82413c03;
++				break;
++			case 3:
++				ata_dev_printk(dev, KERN_INFO, "configured for PIO3\n");
++				dev->pio_mode = XFER_PIO_3;
++				dev->xfer_mode = XFER_PIO_3;
++				*data->cs0_cfg = 0x80823c03;
++				break;
++			case 4:
++				ata_dev_printk(dev, KERN_INFO, "configured for PIO4\n");
++				dev->pio_mode = XFER_PIO_4;
++				dev->xfer_mode = XFER_PIO_4;
++				*data->cs0_cfg = 0x80403c03;
++				break;
++		}
+ 		dev->xfer_shift = ATA_SHIFT_PIO;
+ 		dev->flags |= ATA_DFLAG_PIO;
+ 	}
+@@ -46,6 +88,7 @@ static unsigned int ixp4xx_mmio_data_xfe
+ 	unsigned int i;
+ 	unsigned int words = buflen >> 1;
+ 	u16 *buf16 = (u16 *) buf;
++	unsigned int pio_mask;
+ 	struct ata_port *ap = dev->link->ap;
+ 	void __iomem *mmio = ap->ioaddr.data_addr;
+ 	struct ixp4xx_pata_data *data = dev_get_platdata(ap->host->dev);
+@@ -53,8 +96,34 @@ static unsigned int ixp4xx_mmio_data_xfe
+ 	/* set the expansion bus in 16bit mode and restore
+ 	 * 8 bit mode after the transaction.
+ 	 */
+-	*data->cs0_cfg &= ~(0x01);
+-	udelay(100);
++	if (dev->id[ATA_ID_FIELD_VALID] & (1 << 1)){
++		pio_mask = dev->id[ATA_ID_PIO_MODES] & 0x03;
++		if (pio_mask & (1 << 1)){
++			pio_mask = 4;
++		}else{
++			pio_mask = 3;
++		}
++	}else{
++		pio_mask = (dev->id[ATA_ID_OLD_PIO_MODES] >> 8);
++	}
++	switch (pio_mask){
++		case 0:
++			*data->cs0_cfg = 0xa9643c42;
++		break;
++		case 1:
++			*data->cs0_cfg = 0x85033c42;
++		break;
++		case 2:
++			*data->cs0_cfg = 0x80b23c42;
++		break;
++		case 3:
++			*data->cs0_cfg = 0x80823c42;
++		break;
++		case 4:
++			*data->cs0_cfg = 0x80403c42;
++		break;
++	}
++	udelay(5);
+ 
+ 	/* Transfer multiple of 2 bytes */
+ 	if (rw == READ)
+@@ -79,8 +148,24 @@ static unsigned int ixp4xx_mmio_data_xfe
+ 		words++;
+ 	}
+ 
+-	udelay(100);
+-	*data->cs0_cfg |= 0x01;
++	udelay(5);
++	switch (pio_mask){
++		case 0:
++			*data->cs0_cfg = 0x8a473c03;
++		break;
++		case 1:
++			*data->cs0_cfg = 0x86433c03;
++		break;
++		case 2:
++			*data->cs0_cfg = 0x82413c03;
++		break;
++		case 3:
++			*data->cs0_cfg = 0x80823c03;
++		break;
++		case 4:
++			*data->cs0_cfg = 0x80403c03;
++		break;
++	}
+ 
+ 	return words << 1;
+ }
diff --git a/target/linux/ixp4xx/patches-3.18/500-usr8200_support.patch b/target/linux/ixp4xx/patches-3.18/500-usr8200_support.patch
new file mode 100644
index 0000000..fb7f03e
--- /dev/null
+++ b/target/linux/ixp4xx/patches-3.18/500-usr8200_support.patch
@@ -0,0 +1,347 @@
+--- a/arch/arm/mach-ixp4xx/Kconfig
++++ b/arch/arm/mach-ixp4xx/Kconfig
+@@ -93,6 +93,14 @@ config MACH_SIDEWINDER
+ 	  Engineering Sidewinder board. For more information on this
+ 	  platform, see http://www.adiengineering.com
+ 
++config MACH_USR8200
++	bool "USRobotics USR8200"
++	select PCI
++	help
++	  Say 'Y' here if you want your kernel to support the USRobotics
++	  USR8200 router board. For more information on this platform, see
++	  http://openwrt.org
++
+ config MACH_COMPEXWP18
+ 	bool "Compex WP18 / NP18A"
+ 	select PCI
+--- a/arch/arm/mach-ixp4xx/Makefile
++++ b/arch/arm/mach-ixp4xx/Makefile
+@@ -27,6 +27,7 @@ obj-pci-$(CONFIG_MACH_WRT300NV2)		+= wrt
+ obj-pci-$(CONFIG_MACH_AP1000)		+= ixdp425-pci.o
+ obj-pci-$(CONFIG_MACH_TW5334)		+= tw5334-pci.o
+ obj-pci-$(CONFIG_MACH_MI424WR)		+= mi424wr-pci.o
++obj-pci-$(CONFIG_MACH_USR8200)		+= usr8200-pci.o
+ 
+ obj-y	+= common.o
+ 
+@@ -55,6 +56,7 @@ obj-$(CONFIG_MACH_WRT300NV2)	+= wrt300nv
+ obj-$(CONFIG_MACH_AP1000)	+= ap1000-setup.o
+ obj-$(CONFIG_MACH_TW5334)	+= tw5334-setup.o
+ obj-$(CONFIG_MACH_MI424WR)	+= mi424wr-setup.o
++obj-$(CONFIG_MACH_USR8200)	+= usr8200-setup.o
+ 
+ obj-$(CONFIG_PCI)		+= $(obj-pci-$(CONFIG_PCI)) common-pci.o
+ obj-$(CONFIG_IXP4XX_QMGR)	+= ixp4xx_qmgr.o
+--- a/arch/arm/mach-ixp4xx/include/mach/uncompress.h
++++ b/arch/arm/mach-ixp4xx/include/mach/uncompress.h
+@@ -44,7 +44,8 @@ static __inline__ void __arch_decomp_set
+ 	    machine_is_gateway7001() || machine_is_wg302v2() ||
+ 	    machine_is_devixp() || machine_is_miccpt() || machine_is_mic256() ||
+ 	    machine_is_pronghorn() || machine_is_pronghorn_metro() ||
+-	    machine_is_wrt300nv2() || machine_is_tw5334())
++	    machine_is_wrt300nv2() || machine_is_tw5334() ||
++	    machine_is_usr8200())
+ 		uart_base = (volatile u32*) IXP4XX_UART2_BASE_PHYS;
+ 	else
+ 		uart_base = (volatile u32*) IXP4XX_UART1_BASE_PHYS;
+--- /dev/null
++++ b/arch/arm/mach-ixp4xx/usr8200-pci.c
+@@ -0,0 +1,77 @@
++/*
++ * arch/arch/mach-ixp4xx/usr8200-pci.c
++ *
++ * PCI setup routines for USRobotics USR8200
++ *
++ * Copyright (C) 2008 Peter Denison <openwrt@marshadder.org>
++ *
++ * based on pronghorn-pci.c
++ * 	Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
++ * based on coyote-pci.c:
++ *	Copyright (C) 2002 Jungo Software Technologies.
++ *	Copyright (C) 2003 MontaVista Softwrae, Inc.
++ *
++ * Maintainer: Peter Denison <openwrt@marshadder.org>
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ *
++ */
++
++#include <linux/kernel.h>
++#include <linux/pci.h>
++#include <linux/init.h>
++#include <linux/irq.h>
++
++#include <asm/mach-types.h>
++#include <mach/hardware.h>
++
++#include <asm/mach/pci.h>
++
++void __init usr8200_pci_preinit(void)
++{
++	irq_set_irq_type(IRQ_IXP4XX_GPIO7, IRQ_TYPE_LEVEL_LOW);
++	irq_set_irq_type(IRQ_IXP4XX_GPIO8, IRQ_TYPE_LEVEL_LOW);
++	irq_set_irq_type(IRQ_IXP4XX_GPIO9, IRQ_TYPE_LEVEL_LOW);
++	irq_set_irq_type(IRQ_IXP4XX_GPIO10, IRQ_TYPE_LEVEL_LOW);
++	irq_set_irq_type(IRQ_IXP4XX_GPIO11, IRQ_TYPE_LEVEL_LOW);
++
++	ixp4xx_pci_preinit();
++}
++
++static int __init usr8200_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
++{
++	if (slot == 14)
++		return IRQ_IXP4XX_GPIO7;
++	else if (slot == 15)
++		return IRQ_IXP4XX_GPIO8;
++	else if (slot == 16) {
++		if (pin == 1)
++			return IRQ_IXP4XX_GPIO11;
++		else if (pin == 2)
++			return IRQ_IXP4XX_GPIO10;
++		else if (pin == 3)
++			return IRQ_IXP4XX_GPIO9;
++		else
++			return -1;
++	} else
++		return -1;
++}
++
++struct hw_pci usr8200_pci __initdata = {
++	.nr_controllers	= 1,
++	.preinit	= usr8200_pci_preinit,
++	.ops		= &ixp4xx_ops,
++	.setup		= ixp4xx_setup,
++	.map_irq	= usr8200_map_irq,
++};
++
++int __init usr8200_pci_init(void)
++{
++	if (machine_is_usr8200())
++		pci_common_init(&usr8200_pci);
++	return 0;
++}
++
++subsys_initcall(usr8200_pci_init);
+--- /dev/null
++++ b/arch/arm/mach-ixp4xx/usr8200-setup.c
+@@ -0,0 +1,217 @@
++/*
++ * arch/arm/mach-ixp4xx/usr8200-setup.c
++ *
++ * Board setup for the USRobotics USR8200
++ *
++ * Copyright (C) 2008 Peter Denison <openwrt@marshadder.org>
++ *
++ * based on pronghorn-setup.c:
++ * 	Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
++ * based on coyote-setup.c:
++ *      Copyright (C) 2003-2005 MontaVista Software, Inc.
++ *
++ * Author: Peter Denison <openwrt@marshadder.org>
++ */
++
++#include <linux/kernel.h>
++#include <linux/init.h>
++#include <linux/device.h>
++#include <linux/serial.h>
++#include <linux/tty.h>
++#include <linux/serial_8250.h>
++#include <linux/slab.h>
++#include <linux/types.h>
++#include <linux/memory.h>
++#include <linux/i2c-gpio.h>
++#include <linux/leds.h>
++#include <linux/dma-mapping.h>
++
++#include <asm/setup.h>
++#include <mach/hardware.h>
++#include <asm/irq.h>
++#include <asm/mach-types.h>
++#include <asm/mach/arch.h>
++#include <asm/mach/flash.h>
++
++static struct flash_platform_data usr8200_flash_data = {
++	.map_name	= "cfi_probe",
++	.width		= 2,
++};
++
++static struct resource usr8200_flash_resource = {
++	.flags		= IORESOURCE_MEM,
++};
++
++static struct platform_device usr8200_flash = {
++	.name		= "IXP4XX-Flash",
++	.id		= 0,
++	.dev		= {
++		.platform_data	= &usr8200_flash_data,
++	},
++	.num_resources	= 1,
++	.resource	= &usr8200_flash_resource,
++};
++
++static struct resource usr8200_uart_resources [] = {
++	{
++		.start		= IXP4XX_UART2_BASE_PHYS,
++		.end		= IXP4XX_UART2_BASE_PHYS + 0x0fff,
++		.flags		= IORESOURCE_MEM
++	},
++	{
++		.start		= IXP4XX_UART1_BASE_PHYS,
++		.end		= IXP4XX_UART1_BASE_PHYS + 0x0fff,
++		.flags		= IORESOURCE_MEM
++	}
++};
++
++static struct plat_serial8250_port usr8200_uart_data[] = {
++	{
++		.mapbase	= IXP4XX_UART2_BASE_PHYS,
++		.membase	= (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
++		.irq		= IRQ_IXP4XX_UART2,
++		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
++		.iotype		= UPIO_MEM,
++		.regshift	= 2,
++		.uartclk	= IXP4XX_UART_XTAL,
++	},
++	{
++		.mapbase	= IXP4XX_UART1_BASE_PHYS,
++		.membase	= (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET,
++		.irq		= IRQ_IXP4XX_UART1,
++		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
++		.iotype		= UPIO_MEM,
++		.regshift	= 2,
++		.uartclk	= IXP4XX_UART_XTAL,
++	},
++	{ },
++};
++
++static struct platform_device usr8200_uart = {
++	.name		= "serial8250",
++	.id		= PLAT8250_DEV_PLATFORM,
++	.dev		= {
++		.platform_data	= usr8200_uart_data,
++	},
++	.num_resources	= 2,
++	.resource	= usr8200_uart_resources,
++};
++
++static struct gpio_led usr8200_led_pin[] = {
++	{
++		.name		= "usr8200:usb1",
++		.gpio		= 0,
++		.active_low	= 1,
++	},
++	{
++		.name		= "usr8200:usb2",
++		.gpio		= 1,
++		.active_low	= 1,
++	},
++	{
++		.name		= "usr8200:ieee1394",
++		.gpio		= 2,
++		.active_low	= 1,
++	},
++	{
++		.name		= "usr8200:internal",
++		.gpio		= 3,
++		.active_low	= 1,
++	},
++	{
++		.name		= "usr8200:power",
++		.gpio		= 14,
++	}
++};
++
++static struct gpio_led_platform_data usr8200_led_data = {
++	.num_leds		= ARRAY_SIZE(usr8200_led_pin),
++	.leds			= usr8200_led_pin,
++};
++
++static struct platform_device usr8200_led = {
++	.name			= "leds-gpio",
++	.id			= -1,
++	.dev.platform_data	= &usr8200_led_data,
++};
++
++static struct eth_plat_info usr8200_plat_eth[] = {
++	{ /* NPEC - LAN with Marvell 88E6060 switch */
++		.phy		= IXP4XX_ETH_PHY_MAX_ADDR,
++		.phy_mask	= 0x0F0000,
++		.rxq		= 4,
++		.txreadyq	= 21,
++	}, { /* NPEB - WAN */
++		.phy		= 9,
++		.rxq		= 3,
++		.txreadyq	= 20,
++	}
++};
++
++static struct platform_device usr8200_eth[] = {
++	{
++		.name			= "ixp4xx_eth",
++		.id			= IXP4XX_ETH_NPEC,
++		.dev.platform_data	= usr8200_plat_eth,
++		.dev.coherent_dma_mask	= DMA_BIT_MASK(32),
++	}, {
++		.name			= "ixp4xx_eth",
++		.id			= IXP4XX_ETH_NPEB,
++		.dev.platform_data	= usr8200_plat_eth + 1,
++		.dev.coherent_dma_mask	= DMA_BIT_MASK(32),
++	}
++};
++
++static struct resource usr8200_rtc_resources = {
++	.flags		= IORESOURCE_MEM
++};
++
++static struct platform_device usr8200_rtc = {
++	.name		= "rtc7301",
++	.id		= 0,
++	.num_resources	= 1,
++	.resource	= &usr8200_rtc_resources,
++};
++
++static struct platform_device *usr8200_devices[] __initdata = {
++	&usr8200_flash,
++	&usr8200_uart,
++	&usr8200_led,
++	&usr8200_eth[0],
++	&usr8200_eth[1],
++	&usr8200_rtc,
++};
++
++static void __init usr8200_init(void)
++{
++	ixp4xx_sys_init();
++
++	usr8200_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
++	usr8200_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + SZ_16M - 1;
++
++	usr8200_rtc_resources.start = IXP4XX_EXP_BUS_BASE(2);
++	usr8200_rtc_resources.end = IXP4XX_EXP_BUS_BASE(2) + 0x01ff;
++
++	*IXP4XX_EXP_CS0 |= IXP4XX_FLASH_WRITABLE;
++	*IXP4XX_EXP_CS2 = 0x3fff000 | IXP4XX_EXP_BUS_SIZE(0) | IXP4XX_EXP_BUS_WR_EN |
++	                  IXP4XX_EXP_BUS_CS_EN | IXP4XX_EXP_BUS_BYTE_EN;
++	*IXP4XX_GPIO_GPCLKR = 0x01100000;
++
++	/* configure button as input */
++	gpio_line_config(12, IXP4XX_GPIO_IN);
++
++	platform_add_devices(usr8200_devices, ARRAY_SIZE(usr8200_devices));
++}
++
++MACHINE_START(USR8200, "USRobotics USR8200")
++	/* Maintainer: Peter Denison <openwrt@marshadder.org> */
++	.map_io		= ixp4xx_map_io,
++	.init_irq	= ixp4xx_init_irq,
++	.init_time	= ixp4xx_timer_init,
++	.atag_offset	= 0x0100,
++	.init_machine	= usr8200_init,
++#if defined(CONFIG_PCI)
++	.dma_zone_size	= SZ_64M,
++#endif
++	.restart	= ixp4xx_restart,
++MACHINE_END
diff --git a/target/linux/ixp4xx/patches-3.18/520-tw2662_support.patch b/target/linux/ixp4xx/patches-3.18/520-tw2662_support.patch
new file mode 100644
index 0000000..7cea61f
--- /dev/null
+++ b/target/linux/ixp4xx/patches-3.18/520-tw2662_support.patch
@@ -0,0 +1,317 @@
+--- a/arch/arm/mach-ixp4xx/Kconfig
++++ b/arch/arm/mach-ixp4xx/Kconfig
+@@ -176,6 +176,15 @@ config ARCH_PRPMC1100
+ 	  PrPCM1100 Processor Mezanine Module. For more information on
+ 	  this platform, see <file:Documentation/arm/IXP4xx>.
+ 
++config MACH_TW2662
++        bool "Titan Wireless TW-266-2"
++        select PCI
++        help
++          Say 'Y' here if you want your kernel to support the Titan
++          Wireless TW266-2. For more information on this platform,
++          see http://openwrt.org
++
++
+ config MACH_TW5334
+ 	bool "Titan Wireless TW-533-4"
+ 	select PCI
+--- a/arch/arm/mach-ixp4xx/Makefile
++++ b/arch/arm/mach-ixp4xx/Makefile
+@@ -25,6 +25,7 @@ obj-pci-$(CONFIG_MACH_SIDEWINDER)	+= sid
+ obj-pci-$(CONFIG_MACH_COMPEXWP18)	+= ixdp425-pci.o
+ obj-pci-$(CONFIG_MACH_WRT300NV2)		+= wrt300nv2-pci.o
+ obj-pci-$(CONFIG_MACH_AP1000)		+= ixdp425-pci.o
++obj-pci-$(CONFIG_MACH_TW2662)		+= tw2662-pci.o
+ obj-pci-$(CONFIG_MACH_TW5334)		+= tw5334-pci.o
+ obj-pci-$(CONFIG_MACH_MI424WR)		+= mi424wr-pci.o
+ obj-pci-$(CONFIG_MACH_USR8200)		+= usr8200-pci.o
+@@ -54,6 +55,7 @@ obj-$(CONFIG_MACH_SIDEWINDER)	+= sidewin
+ obj-$(CONFIG_MACH_COMPEXWP18)	+= compex42x-setup.o
+ obj-$(CONFIG_MACH_WRT300NV2)	+= wrt300nv2-setup.o
+ obj-$(CONFIG_MACH_AP1000)	+= ap1000-setup.o
++obj-$(CONFIG_MACH_TW2662)	+= tw2662-setup.o
+ obj-$(CONFIG_MACH_TW5334)	+= tw5334-setup.o
+ obj-$(CONFIG_MACH_MI424WR)	+= mi424wr-setup.o
+ obj-$(CONFIG_MACH_USR8200)	+= usr8200-setup.o
+--- a/arch/arm/mach-ixp4xx/include/mach/uncompress.h
++++ b/arch/arm/mach-ixp4xx/include/mach/uncompress.h
+@@ -45,7 +45,7 @@ static __inline__ void __arch_decomp_set
+ 	    machine_is_devixp() || machine_is_miccpt() || machine_is_mic256() ||
+ 	    machine_is_pronghorn() || machine_is_pronghorn_metro() ||
+ 	    machine_is_wrt300nv2() || machine_is_tw5334() ||
+-	    machine_is_usr8200())
++	    machine_is_usr8200() || machine_is_tw2662())
+ 		uart_base = (volatile u32*) IXP4XX_UART2_BASE_PHYS;
+ 	else
+ 		uart_base = (volatile u32*) IXP4XX_UART1_BASE_PHYS;
+--- /dev/null
++++ b/arch/arm/mach-ixp4xx/tw2662-pci.c
+@@ -0,0 +1,67 @@
++/*
++ * arch/arm/mach-ixp4xx/tw2662-pci.c
++ *
++ * PCI setup routines for Tiran Wireless TW-266-2 platform
++ *
++ * Copyright (C) 2002 Jungo Software Technologies.
++ * Copyright (C) 2003 MontaVista Softwrae, Inc.
++ * Copyright (C) 2010 Alexandros C. Couloumbis <alex@ozo.com>
++ * Copyright (C) 2010 Gabor Juhos <juhosg@openwrt.org>
++ *
++ * Maintainer: Deepak Saxena <dsaxena@mvista.com>
++ * Maintainer: Alexandros C. Couloumbis <alex@ozo.com>
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ *
++ */
++
++#include <linux/kernel.h>
++#include <linux/pci.h>
++#include <linux/init.h>
++#include <linux/irq.h>
++#include <asm/mach-types.h>
++#include <mach/hardware.h>
++#include <asm/irq.h>
++#include <asm/mach/pci.h>
++
++#define SLOT0_DEVID	1
++#define SLOT1_DEVID	3
++
++/* PCI controller GPIO to IRQ pin mappings */
++#define SLOT0_INTA	11
++#define SLOT1_INTA	9
++
++void __init tw2662_pci_preinit(void)
++{
++	irq_set_irq_type(IXP4XX_GPIO_IRQ(SLOT0_INTA), IRQ_TYPE_LEVEL_LOW);
++	irq_set_irq_type(IXP4XX_GPIO_IRQ(SLOT1_INTA), IRQ_TYPE_LEVEL_LOW);
++	ixp4xx_pci_preinit();
++}
++
++static int __init tw2662_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
++{
++	if (slot == SLOT0_DEVID)
++		return IXP4XX_GPIO_IRQ(SLOT0_INTA);
++	else if (slot == SLOT1_DEVID)
++		return IXP4XX_GPIO_IRQ(SLOT1_INTA);
++	else return -1;
++}
++
++struct hw_pci tw2662_pci __initdata = {
++	.nr_controllers = 1,
++	.preinit =        tw2662_pci_preinit,
++	.ops =            &ixp4xx_ops,
++	.setup =          ixp4xx_setup,
++	.map_irq =        tw2662_map_irq,
++};
++
++int __init tw2662_pci_init(void)
++{
++        if (machine_is_tw2662())
++		pci_common_init(&tw2662_pci);
++        return 0;
++}
++
++subsys_initcall(tw2662_pci_init);
+--- /dev/null
++++ b/arch/arm/mach-ixp4xx/tw2662-setup.c
+@@ -0,0 +1,197 @@
++/*
++ * arch/arm/mach-ixp4xx/tw2662-setup.c
++ *
++ * Titan Wireless TW-266-2
++ *
++ * Copyright (C) 2010 Gabor Juhos <juhosg@openwrt.org>
++ * Copyright (C) 2010 Alexandros C. Couloumbis <alex@ozo.com>
++ *
++ * based on ap1000-setup.c:
++ * 	Author: Imre Kaloz <Kaloz@openwrt.org>
++ */
++
++#include <linux/if_ether.h>
++#include <linux/kernel.h>
++#include <linux/init.h>
++#include <linux/device.h>
++#include <linux/serial.h>
++#include <linux/tty.h>
++#include <linux/serial_8250.h>
++#include <linux/slab.h>
++#include <linux/netdevice.h>
++#include <linux/etherdevice.h>
++#include <linux/platform_device.h>
++
++#include <asm/io.h>
++#include <asm/types.h>
++#include <asm/setup.h>
++#include <asm/memory.h>
++#include <mach/hardware.h>
++#include <asm/mach-types.h>
++#include <asm/irq.h>
++#include <asm/mach/arch.h>
++#include <asm/mach/flash.h>
++
++/* gpio mask used by platform device */
++#define TW2662_GPIO_MASK        (1 << 1) | (1 << 3) | (1 << 5) | (1 << 7)
++
++static struct flash_platform_data tw2662_flash_data = {
++	.map_name	= "cfi_probe",
++	.width		= 2,
++};
++
++static struct resource tw2662_flash_resource = {
++	.flags		= IORESOURCE_MEM,
++};
++
++static struct platform_device tw2662_flash = {
++	.name		= "IXP4XX-Flash",
++	.id		= 0,
++	.dev		= {
++		.platform_data = &tw2662_flash_data,
++	},
++	.num_resources	= 1,
++	.resource	= &tw2662_flash_resource,
++};
++
++static struct resource tw2662_uart_resources[] = {
++	{
++		.start		= IXP4XX_UART1_BASE_PHYS,
++		.end		= IXP4XX_UART1_BASE_PHYS + 0x0fff,
++		.flags		= IORESOURCE_MEM
++	},
++	{
++		.start		= IXP4XX_UART2_BASE_PHYS,
++		.end		= IXP4XX_UART2_BASE_PHYS + 0x0fff,
++		.flags		= IORESOURCE_MEM
++	}
++};
++
++static struct plat_serial8250_port tw2662_uart_data[] = {
++	{
++		.mapbase	= IXP4XX_UART1_BASE_PHYS,
++		.membase	= (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET,
++		.irq		= IRQ_IXP4XX_UART1,
++		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
++		.iotype		= UPIO_MEM,
++		.regshift	= 2,
++		.uartclk	= IXP4XX_UART_XTAL,
++	},
++	{
++		.mapbase	= IXP4XX_UART2_BASE_PHYS,
++		.membase	= (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
++		.irq		= IRQ_IXP4XX_UART2,
++		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
++		.iotype		= UPIO_MEM,
++		.regshift	= 2,
++		.uartclk	= IXP4XX_UART_XTAL,
++	},
++	{ },
++};
++
++static struct platform_device tw2662_uart = {
++	.name			= "serial8250",
++	.id			= PLAT8250_DEV_PLATFORM,
++	.dev.platform_data	= tw2662_uart_data,
++	.num_resources		= 2,
++	.resource		= tw2662_uart_resources
++};
++
++/* Built-in 10/100 Ethernet MAC interfaces */
++static struct eth_plat_info tw2662_plat_eth[] = {
++        {
++                .phy            = 3,
++                .rxq            = 3,
++                .txreadyq       = 20,
++        }, {
++                .phy            = 1,
++                .rxq            = 4,
++                .txreadyq       = 21,
++        }
++};
++
++static struct platform_device tw2662_eth[] = {
++	{
++		.name			= "ixp4xx_eth",
++		.id			= IXP4XX_ETH_NPEB,
++		.dev.platform_data	= tw2662_plat_eth,
++		.dev.coherent_dma_mask	= DMA_BIT_MASK(32),
++	}, {
++		.name			= "ixp4xx_eth",
++		.id			= IXP4XX_ETH_NPEC,
++		.dev.platform_data	= tw2662_plat_eth + 1,
++		.dev.coherent_dma_mask	= DMA_BIT_MASK(32),
++	}
++};
++
++
++static struct platform_device *tw2662_devices[] __initdata = {
++	&tw2662_flash,
++	&tw2662_uart,
++	&tw2662_eth[0],
++	&tw2662_eth[1],
++};
++
++static char tw2662_mem_fixup[] __initdata = "mem=64M ";
++
++static void __init tw2662_fixup(struct tag *tags, char **cmdline,
++				struct meminfo *mi)
++{
++	struct tag *t = tags;
++	char *p = *cmdline;
++
++	/* Find the end of the tags table, taking note of any cmdline tag. */
++	for (; t->hdr.size; t = tag_next(t)) {
++		if (t->hdr.tag == ATAG_CMDLINE) {
++			p = t->u.cmdline.cmdline;
++		}
++	}
++
++	/* Overwrite the end of the table with a new cmdline tag. */
++	t->hdr.tag = ATAG_CMDLINE;
++	t->hdr.size = (sizeof (struct tag_header) +
++		strlen(tw2662_mem_fixup) + strlen(p) + 1 + 4) >> 2;
++	strlcpy(t->u.cmdline.cmdline, tw2662_mem_fixup, COMMAND_LINE_SIZE);
++	strlcpy(t->u.cmdline.cmdline + strlen(tw2662_mem_fixup), p,
++		COMMAND_LINE_SIZE - strlen(tw2662_mem_fixup));
++
++	/* Terminate the table. */
++	t = tag_next(t);
++	t->hdr.tag = ATAG_NONE;
++	t->hdr.size = 0;
++}
++
++static void __init tw2662_init(void)
++{
++	ixp4xx_sys_init();
++
++	tw2662_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
++	tw2662_flash_resource.end =
++		IXP4XX_EXP_BUS_BASE(0) + ixp4xx_exp_bus_size - 1;
++
++	platform_add_devices(tw2662_devices, ARRAY_SIZE(tw2662_devices));
++
++	if (!(is_valid_ether_addr(tw2662_plat_eth[0].hwaddr)))
++		random_ether_addr(tw2662_plat_eth[0].hwaddr);
++	if (!(is_valid_ether_addr(tw2662_plat_eth[1].hwaddr))) {
++		memcpy(tw2662_plat_eth[1].hwaddr, tw2662_plat_eth[0].hwaddr, ETH_ALEN);
++		tw2662_plat_eth[1].hwaddr[5] = (tw2662_plat_eth[0].hwaddr[5] + 1);
++	}
++
++}
++
++#ifdef CONFIG_MACH_TW2662
++MACHINE_START(TW2662, "Titan Wireless TW-266-2")
++	/* Maintainer: Alexandros C. Couloumbis <alex@ozo.com> */
++	.fixup		= tw2662_fixup,
++	.map_io		= ixp4xx_map_io,
++	.init_irq	= ixp4xx_init_irq,
++	.init_time	= ixp4xx_timer_init,
++	.atag_offset	= 0x0100,
++	.init_machine	= tw2662_init,
++#if defined(CONFIG_PCI)
++	.dma_zone_size	= SZ_64M,
++#endif
++	.restart	= ixp4xx_restart,
++MACHINE_END
++#endif
diff --git a/target/linux/ixp4xx/patches-3.18/530-ap42x_support.patch b/target/linux/ixp4xx/patches-3.18/530-ap42x_support.patch
new file mode 100644
index 0000000..1afbe3d
--- /dev/null
+++ b/target/linux/ixp4xx/patches-3.18/530-ap42x_support.patch
@@ -0,0 +1,282 @@
+--- a/arch/arm/mach-ixp4xx/Kconfig
++++ b/arch/arm/mach-ixp4xx/Kconfig
+@@ -4,6 +4,14 @@ menu "Intel IXP4xx Implementation Option
+ 
+ comment "IXP4xx Platforms"
+ 
++config MACH_AP42X
++	bool "Tonze AP-422/425"
++	select PCI
++	help
++	  Say 'Y' here if you want your kernel to support Tonze's
++	  AP-422/425 boards. For more information on this platform,
++	  see http://tonze.com.tw
++
+ config MACH_NSLU2
+ 	bool
+ 	prompt "Linksys NSLU2"
+--- a/arch/arm/mach-ixp4xx/Makefile
++++ b/arch/arm/mach-ixp4xx/Makefile
+@@ -5,6 +5,7 @@
+ obj-pci-y	:=
+ obj-pci-n	:=
+ 
++obj-pci-$(CONFIG_MACH_AP42X)		+= ap42x-pci.o
+ obj-pci-$(CONFIG_ARCH_IXDP4XX)		+= ixdp425-pci.o
+ obj-pci-$(CONFIG_MACH_AVILA)		+= avila-pci.o
+ obj-pci-$(CONFIG_MACH_CAMBRIA)		+= cambria-pci.o
+@@ -32,6 +33,7 @@ obj-pci-$(CONFIG_MACH_USR8200)		+= usr82
+ 
+ obj-y	+= common.o
+ 
++obj-$(CONFIG_MACH_AP42X)	+= ap42x-setup.o
+ obj-$(CONFIG_ARCH_IXDP4XX)	+= ixdp425-setup.o
+ obj-$(CONFIG_MACH_AVILA)	+= avila-setup.o
+ obj-$(CONFIG_MACH_CAMBRIA)	+= cambria-setup.o
+--- /dev/null
++++ b/arch/arm/mach-ixp4xx/ap42x-pci.c
+@@ -0,0 +1,63 @@
++/*
++ * arch/arch/mach-ixp4xx/ap42x-pci.c
++ *
++ * PCI setup routines for Tonze AP-422/425
++ *
++ * Copyright (C) 2012 Imre Kaloz <kaloz@openwrt.org>
++ *
++ * based on coyote-pci.c:
++ *	Copyright (C) 2002 Jungo Software Technologies.
++ *	Copyright (C) 2003 MontaVista Softwrae, Inc.
++ *
++ * Maintainer: Imre Kaloz <kaloz@openwrt.org>
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ *
++ */
++
++#include <linux/kernel.h>
++#include <linux/pci.h>
++#include <linux/init.h>
++#include <linux/irq.h>
++
++#include <asm/mach-types.h>
++#include <mach/hardware.h>
++
++#include <asm/mach/pci.h>
++
++void __init ap42x_pci_preinit(void)
++{
++	irq_set_irq_type(IRQ_IXP4XX_GPIO10, IRQ_TYPE_LEVEL_LOW);
++	irq_set_irq_type(IRQ_IXP4XX_GPIO11, IRQ_TYPE_LEVEL_LOW);
++
++	ixp4xx_pci_preinit();
++}
++
++static int __init ap42x_map_irq(const struct pci_dev *dev, u8 slot,
++	u8 pin)
++{
++	if (slot == 1)
++		return IRQ_IXP4XX_GPIO11;
++	else if (slot == 2)
++		return IRQ_IXP4XX_GPIO10;
++	else return -1;
++}
++
++struct hw_pci ap42x_pci __initdata = {
++	.nr_controllers = 1,
++	.preinit	= ap42x_pci_preinit,
++	.ops		= &ixp4xx_ops,
++	.setup		= ixp4xx_setup,
++	.map_irq	= ap42x_map_irq,
++};
++
++int __init ap42x_pci_init(void)
++{
++	if (machine_is_ap42x())
++		pci_common_init(&ap42x_pci);
++	return 0;
++}
++
++subsys_initcall(ap42x_pci_init);
+--- /dev/null
++++ b/arch/arm/mach-ixp4xx/ap42x-setup.c
+@@ -0,0 +1,166 @@
++/*
++ * arch/arm/mach-ixp4xx/ap42x-setup.c
++ *
++ * Board setup for the Tonze AP-42x boards
++ *
++ * Copyright (C) 2012 Imre Kaloz <kaloz@openwrt.org>
++ *
++ * based on coyote-setup.c:
++ *      Copyright (C) 2003-2005 MontaVista Software, Inc.
++ *
++ * Author: Imre Kaloz <Kaloz@openwrt.org>
++ */
++
++#include <linux/kernel.h>
++#include <linux/init.h>
++#include <linux/device.h>
++#include <linux/serial.h>
++#include <linux/tty.h>
++#include <linux/serial_8250.h>
++#include <linux/mtd/physmap.h>
++#include <linux/dma-mapping.h>
++
++#include <asm/types.h>
++#include <asm/setup.h>
++#include <asm/memory.h>
++#include <mach/hardware.h>
++#include <asm/irq.h>
++#include <asm/mach-types.h>
++#include <asm/mach/arch.h>
++#include <asm/mach/flash.h>
++
++static struct mtd_partition ap42x_flash_partitions[] = {
++	{
++		.name		= "RedBoot",
++		.offset		= 0x00000000,
++		.size		= 0x00080000,
++	}, {
++		.name		= "linux",
++		.offset		= 0x00080000,
++		.size		= 0x00100000,
++	}, {
++		.name		= "rootfs",
++		.offset		= 0x00180000,
++		.size		= 0x00660000,
++	}, {
++		.name		= "FIS directory",
++		.offset		= 0x007f8000,
++		.size		= 0x00007000,
++	}, {
++		.name		= "RedBoot config",
++		.offset		= 0x007ff000,
++		.size		= 0x00001000,
++	},
++};
++
++static struct physmap_flash_data ap42x_flash_data = {
++	.width		= 2,
++	.parts		= ap42x_flash_partitions,
++	.nr_parts	= ARRAY_SIZE(ap42x_flash_partitions),
++};
++
++static struct resource ap42x_flash_resource = {
++	.flags		= IORESOURCE_MEM,
++	.start		= IXP4XX_EXP_BUS_BASE_PHYS,
++	.end		= IXP4XX_EXP_BUS_BASE_PHYS + SZ_8M - 1,
++};
++
++static struct platform_device ap42x_flash = {
++	.name			= "physmap-flash",
++	.id			= 0,
++	.dev		= {
++		.platform_data	= &ap42x_flash_data,
++	},
++	.num_resources		= 1,
++	.resource		= &ap42x_flash_resource,
++};
++
++static struct resource ap42x_uart_resource = {
++	.start	= IXP4XX_UART2_BASE_PHYS,
++	.end	= IXP4XX_UART2_BASE_PHYS + 0x0fff,
++	.flags	= IORESOURCE_MEM,
++};
++
++static struct plat_serial8250_port ap42x_uart_data[] = {
++	{
++		.mapbase	= IXP4XX_UART2_BASE_PHYS,
++		.membase	= (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
++		.irq		= IRQ_IXP4XX_UART2,
++		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
++		.iotype		= UPIO_MEM,
++		.regshift	= 2,
++		.uartclk	= IXP4XX_UART_XTAL,
++	},
++	{ },
++};
++
++static struct platform_device ap42x_uart = {
++	.name		= "serial8250",
++	.id		= PLAT8250_DEV_PLATFORM,
++	.dev			= {
++		.platform_data	= ap42x_uart_data,
++	},
++	.num_resources	= 1,
++	.resource	= &ap42x_uart_resource,
++};
++
++static struct eth_plat_info ap42x_plat_eth[] = {
++	{
++		.phy		= 2,
++		.rxq		= 3,
++		.txreadyq	= 20,
++	}, {
++		.phy		= 1,
++		.rxq		= 4,
++		.txreadyq	= 21,
++	}
++};
++
++static struct platform_device ap42x_eth[] = {
++	{
++		.name			= "ixp4xx_eth",
++		.id			= IXP4XX_ETH_NPEB,
++		.dev.platform_data	= ap42x_plat_eth,
++		.dev.coherent_dma_mask	= DMA_BIT_MASK(32),
++	}, {
++		.name			= "ixp4xx_eth",
++		.id			= IXP4XX_ETH_NPEC,
++		.dev.platform_data	= ap42x_plat_eth + 1,
++		.dev.coherent_dma_mask	= DMA_BIT_MASK(32),
++	}
++};
++
++static struct platform_device *ap42x_devices[] __initdata = {
++	&ap42x_flash,
++	&ap42x_uart,
++	&ap42x_eth[0],
++	&ap42x_eth[1],
++};
++
++static void __init ap42x_init(void)
++{
++	ixp4xx_sys_init();
++
++	ap42x_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
++	ap42x_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + SZ_32M - 1;
++
++	*IXP4XX_EXP_CS0 |= IXP4XX_FLASH_WRITABLE;
++	*IXP4XX_EXP_CS1 = *IXP4XX_EXP_CS0;
++
++	platform_add_devices(ap42x_devices, ARRAY_SIZE(ap42x_devices));
++}
++
++#ifdef CONFIG_MACH_AP42X
++MACHINE_START(AP42X, "Tonze AP-422/425")
++	/* Maintainer: Imre Kaloz <kaloz@openwrt.org> */
++	.map_io		= ixp4xx_map_io,
++	.init_irq	= ixp4xx_init_irq,
++	.init_time	= ixp4xx_timer_init,
++	.atag_offset	= 0x100,
++	.init_machine	= ap42x_init,
++#if defined(CONFIG_PCI)
++	.dma_zone_size	= SZ_64M,
++#endif
++	.restart	= ixp4xx_restart,
++MACHINE_END
++#endif
+--- a/arch/arm/mach-ixp4xx/include/mach/uncompress.h
++++ b/arch/arm/mach-ixp4xx/include/mach/uncompress.h
+@@ -45,7 +45,8 @@ static __inline__ void __arch_decomp_set
+ 	    machine_is_devixp() || machine_is_miccpt() || machine_is_mic256() ||
+ 	    machine_is_pronghorn() || machine_is_pronghorn_metro() ||
+ 	    machine_is_wrt300nv2() || machine_is_tw5334() ||
+-	    machine_is_usr8200() || machine_is_tw2662())
++	    machine_is_usr8200() || machine_is_tw2662() ||
++	    machine_is_ap42x())
+ 		uart_base = (volatile u32*) IXP4XX_UART2_BASE_PHYS;
+ 	else
+ 		uart_base = (volatile u32*) IXP4XX_UART1_BASE_PHYS;
diff --git a/target/linux/ixp4xx/patches-3.18/600-skb_avoid_dmabounce.patch b/target/linux/ixp4xx/patches-3.18/600-skb_avoid_dmabounce.patch
new file mode 100644
index 0000000..65b1c1f
--- /dev/null
+++ b/target/linux/ixp4xx/patches-3.18/600-skb_avoid_dmabounce.patch
@@ -0,0 +1,23 @@
+--- a/net/core/skbuff.c
++++ b/net/core/skbuff.c
+@@ -210,6 +210,9 @@ struct sk_buff *__alloc_skb(unsigned int
+ 
+ 	if (sk_memalloc_socks() && (flags & SKB_ALLOC_RX))
+ 		gfp_mask |= __GFP_MEMALLOC;
++#ifdef CONFIG_ARCH_IXP4XX
++	gfp_mask |= GFP_DMA;
++#endif
+ 
+ 	/* Get the HEAD */
+ 	skb = kmem_cache_alloc_node(cache, gfp_mask & ~__GFP_DMA, node);
+@@ -1096,6 +1099,10 @@ int pskb_expand_head(struct sk_buff *skb
+ 	if (skb_shared(skb))
+ 		BUG();
+ 
++#ifdef CONFIG_ARCH_IXP4XX
++	gfp_mask |= GFP_DMA;
++#endif
++
+ 	size = SKB_DATA_ALIGN(size);
+ 
+ 	if (skb_pfmemalloc(skb))
diff --git a/target/linux/ixp4xx/patches-3.18/900-ixp4xx-crypto-include-module.h.patch b/target/linux/ixp4xx/patches-3.18/900-ixp4xx-crypto-include-module.h.patch
new file mode 100644
index 0000000..24c93dc
--- /dev/null
+++ b/target/linux/ixp4xx/patches-3.18/900-ixp4xx-crypto-include-module.h.patch
@@ -0,0 +1,10 @@
+--- a/drivers/crypto/ixp4xx_crypto.c
++++ b/drivers/crypto/ixp4xx_crypto.c
+@@ -14,6 +14,7 @@
+ #include <linux/dmapool.h>
+ #include <linux/crypto.h>
+ #include <linux/kernel.h>
++#include <linux/module.h>
+ #include <linux/rtnetlink.h>
+ #include <linux/interrupt.h>
+ #include <linux/spinlock.h>
diff --git a/target/linux/ixp4xx/patches-3.18/910-ixp4xx-nr_irq_lines.patch b/target/linux/ixp4xx/patches-3.18/910-ixp4xx-nr_irq_lines.patch
new file mode 100644
index 0000000..06e09f4
--- /dev/null
+++ b/target/linux/ixp4xx/patches-3.18/910-ixp4xx-nr_irq_lines.patch
@@ -0,0 +1,22 @@
+--- a/arch/arm/mach-ixp4xx/ixdp425-pci.c
++++ b/arch/arm/mach-ixp4xx/ixdp425-pci.c
+@@ -53,7 +53,7 @@ static int __init ixdp425_map_irq(const
+ 	};
+ 
+ 	if (slot >= 1 && slot <= MAX_DEV && pin >= 1 && pin <= IRQ_LINES)
+-		return pci_irq_table[(slot + pin - 2) % 4];
++		return pci_irq_table[(slot + pin - 2) % IRQ_LINES];
+ 
+ 	return -1;
+ }
+--- a/arch/arm/mach-ixp4xx/miccpt-pci.c
++++ b/arch/arm/mach-ixp4xx/miccpt-pci.c
+@@ -54,7 +54,7 @@ static int __init miccpt_map_irq(const s
+ 	};
+ 
+ 	if (slot >= 1 && slot <= MAX_DEV && pin >= 1 && pin <= IRQ_LINES)
+-		return pci_irq_table[(slot + pin - 2) % 4];
++		return pci_irq_table[(slot + pin - 2) % IRQ_LINES];
+ 
+ 	return -1;
+ }
diff --git a/target/linux/ixp4xx/patches-4.1/001-arm-ixp4xx-set-cohorent_dma_mask-for-ethernet-platfo.patch b/target/linux/ixp4xx/patches-4.1/001-arm-ixp4xx-set-cohorent_dma_mask-for-ethernet-platfo.patch
new file mode 100644
index 0000000..3ca3eb7
--- /dev/null
+++ b/target/linux/ixp4xx/patches-4.1/001-arm-ixp4xx-set-cohorent_dma_mask-for-ethernet-platfo.patch
@@ -0,0 +1,136 @@
+From 7113f56b683c5123df5c20724ac813cee66fa21a Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jogo@openwrt.org>
+Date: Mon, 1 Jul 2013 16:49:05 +0200
+Subject: [PATCH 1/2] arm: ixp4xx: set cohorent_dma_mask for ethernet platform
+ devices
+
+ARM requires the cohorent_dma_mask set, so set it for the platform
+devices so that the ethernet driver has access to it.
+
+Signed-off-by: Jonas Gorski <jogo@openwrt.org>
+---
+ arch/arm/mach-ixp4xx/fsg-setup.c     |    2 ++
+ arch/arm/mach-ixp4xx/goramo_mlr.c    |    2 ++
+ arch/arm/mach-ixp4xx/ixdp425-setup.c |    3 +++
+ arch/arm/mach-ixp4xx/nas100d-setup.c |    1 +
+ arch/arm/mach-ixp4xx/nslu2-setup.c   |    1 +
+ arch/arm/mach-ixp4xx/omixp-setup.c   |    3 +++
+ arch/arm/mach-ixp4xx/vulcan-setup.c  |    2 ++
+ 7 files changed, 14 insertions(+)
+
+--- a/arch/arm/mach-ixp4xx/fsg-setup.c
++++ b/arch/arm/mach-ixp4xx/fsg-setup.c
+@@ -142,12 +142,14 @@ static struct platform_device fsg_eth[]
+ 		.id			= IXP4XX_ETH_NPEB,
+ 		.dev = {
+ 			.platform_data	= fsg_plat_eth,
++			.coherent_dma_mask = DMA_BIT_MASK(32),
+ 		},
+ 	}, {
+ 		.name			= "ixp4xx_eth",
+ 		.id			= IXP4XX_ETH_NPEC,
+ 		.dev = {
+ 			.platform_data	= fsg_plat_eth + 1,
++			.coherent_dma_mask = DMA_BIT_MASK(32),
+ 		},
+ 	}
+ };
+--- a/arch/arm/mach-ixp4xx/goramo_mlr.c
++++ b/arch/arm/mach-ixp4xx/goramo_mlr.c
+@@ -295,10 +295,12 @@ static struct platform_device device_eth
+ 		.name			= "ixp4xx_eth",
+ 		.id			= IXP4XX_ETH_NPEB,
+ 		.dev.platform_data	= eth_plat,
++		.dev.coherent_dma_mask	= DMA_BIT_MASK(32),
+ 	}, {
+ 		.name			= "ixp4xx_eth",
+ 		.id			= IXP4XX_ETH_NPEC,
+ 		.dev.platform_data	= eth_plat + 1,
++		.dev.coherent_dma_mask	= DMA_BIT_MASK(32),
+ 	}
+ };
+ 
+--- a/arch/arm/mach-ixp4xx/ixdp425-setup.c
++++ b/arch/arm/mach-ixp4xx/ixdp425-setup.c
+@@ -20,6 +20,7 @@
+ #include <linux/mtd/nand.h>
+ #include <linux/mtd/partitions.h>
+ #include <linux/delay.h>
++#include <linux/dma-mapping.h>
+ #include <linux/gpio.h>
+ #include <asm/types.h>
+ #include <asm/setup.h>
+@@ -196,10 +197,12 @@ static struct platform_device ixdp425_et
+ 		.name			= "ixp4xx_eth",
+ 		.id			= IXP4XX_ETH_NPEB,
+ 		.dev.platform_data	= ixdp425_plat_eth,
++		.dev.coherent_dma_mask	= DMA_BIT_MASK(32),
+ 	}, {
+ 		.name			= "ixp4xx_eth",
+ 		.id			= IXP4XX_ETH_NPEC,
+ 		.dev.platform_data	= ixdp425_plat_eth + 1,
++		.dev.coherent_dma_mask	= DMA_BIT_MASK(32),
+ 	}
+ };
+ 
+--- a/arch/arm/mach-ixp4xx/nas100d-setup.c
++++ b/arch/arm/mach-ixp4xx/nas100d-setup.c
+@@ -170,6 +170,7 @@ static struct platform_device nas100d_et
+ 		.name			= "ixp4xx_eth",
+ 		.id			= IXP4XX_ETH_NPEB,
+ 		.dev.platform_data	= nas100d_plat_eth,
++		.dev.coherent_dma_mask	= DMA_BIT_MASK(32),
+ 	}
+ };
+ 
+--- a/arch/arm/mach-ixp4xx/nslu2-setup.c
++++ b/arch/arm/mach-ixp4xx/nslu2-setup.c
+@@ -182,6 +182,7 @@ static struct platform_device nslu2_eth[
+ 		.name			= "ixp4xx_eth",
+ 		.id			= IXP4XX_ETH_NPEB,
+ 		.dev.platform_data	= nslu2_plat_eth,
++		.dev.coherent_dma_mask	= DMA_BIT_MASK(32),
+ 	}
+ };
+ 
+--- a/arch/arm/mach-ixp4xx/omixp-setup.c
++++ b/arch/arm/mach-ixp4xx/omixp-setup.c
+@@ -17,6 +17,7 @@
+ #include <linux/serial_8250.h>
+ #include <linux/mtd/mtd.h>
+ #include <linux/mtd/partitions.h>
++#include <linux/dma-mapping.h>
+ #include <linux/leds.h>
+ 
+ #include <asm/setup.h>
+@@ -188,10 +189,12 @@ static struct platform_device ixdp425_et
+ 		.name			= "ixp4xx_eth",
+ 		.id			= IXP4XX_ETH_NPEB,
+ 		.dev.platform_data	= ixdp425_plat_eth,
++		.dev.coherent_dma_mask	= DMA_BIT_MASK(32),
+ 	}, {
+ 		.name			= "ixp4xx_eth",
+ 		.id			= IXP4XX_ETH_NPEC,
+ 		.dev.platform_data	= ixdp425_plat_eth + 1,
++		.dev.coherent_dma_mask	= DMA_BIT_MASK(32),
+ 	},
+ };
+ 
+--- a/arch/arm/mach-ixp4xx/vulcan-setup.c
++++ b/arch/arm/mach-ixp4xx/vulcan-setup.c
+@@ -139,6 +139,7 @@ static struct platform_device vulcan_eth
+ 		.id			= IXP4XX_ETH_NPEB,
+ 		.dev = {
+ 			.platform_data	= &vulcan_plat_eth[0],
++			.coherent_dma_mask = DMA_BIT_MASK(32),
+ 		},
+ 	},
+ 	[1] = {
+@@ -146,6 +147,7 @@ static struct platform_device vulcan_eth
+ 		.id			= IXP4XX_ETH_NPEC,
+ 		.dev = {
+ 			.platform_data	= &vulcan_plat_eth[1],
++			.coherent_dma_mask = DMA_BIT_MASK(32),
+ 		},
+ 	},
+ };
diff --git a/target/linux/ixp4xx/patches-4.1/002-ixp4xx_eth-use-parent-device-for-dma-allocations.patch b/target/linux/ixp4xx/patches-4.1/002-ixp4xx_eth-use-parent-device-for-dma-allocations.patch
new file mode 100644
index 0000000..ceaf21b
--- /dev/null
+++ b/target/linux/ixp4xx/patches-4.1/002-ixp4xx_eth-use-parent-device-for-dma-allocations.patch
@@ -0,0 +1,95 @@
+From 1d67040af0144c549f4db8144d2ccc253ff8639c Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jogo@openwrt.org>
+Date: Mon, 1 Jul 2013 16:39:28 +0200
+Subject: [PATCH 2/2] net: ixp4xx_eth: use parent device for dma allocations
+
+Now that the platfomr device provides a dma_cohorent_mask, use it for
+dma operations.
+
+This fixes ethernet on ixp4xx which was broken since 3.7.
+
+Signed-off-by: Jonas Gorski <jogo@openwrt.org>
+---
+ drivers/net/ethernet/xscale/ixp4xx_eth.c |   23 ++++++++++++-----------
+ 1 file changed, 12 insertions(+), 11 deletions(-)
+
+--- a/drivers/net/ethernet/xscale/ixp4xx_eth.c
++++ b/drivers/net/ethernet/xscale/ixp4xx_eth.c
+@@ -657,10 +657,10 @@ static inline void queue_put_desc(unsign
+ static inline void dma_unmap_tx(struct port *port, struct desc *desc)
+ {
+ #ifdef __ARMEB__
+-	dma_unmap_single(&port->netdev->dev, desc->data,
++	dma_unmap_single(port->netdev->dev.parent, desc->data,
+ 			 desc->buf_len, DMA_TO_DEVICE);
+ #else
+-	dma_unmap_single(&port->netdev->dev, desc->data & ~3,
++	dma_unmap_single(port->netdev->dev.parent, desc->data & ~3,
+ 			 ALIGN((desc->data & 3) + desc->buf_len, 4),
+ 			 DMA_TO_DEVICE);
+ #endif
+@@ -727,9 +727,9 @@ static int eth_poll(struct napi_struct *
+ 
+ #ifdef __ARMEB__
+ 		if ((skb = netdev_alloc_skb(dev, RX_BUFF_SIZE))) {
+-			phys = dma_map_single(&dev->dev, skb->data,
++			phys = dma_map_single(dev->dev.parent, skb->data,
+ 					      RX_BUFF_SIZE, DMA_FROM_DEVICE);
+-			if (dma_mapping_error(&dev->dev, phys)) {
++			if (dma_mapping_error(dev->dev.parent, phys)) {
+ 				dev_kfree_skb(skb);
+ 				skb = NULL;
+ 			}
+@@ -752,10 +752,11 @@ static int eth_poll(struct napi_struct *
+ #ifdef __ARMEB__
+ 		temp = skb;
+ 		skb = port->rx_buff_tab[n];
+-		dma_unmap_single(&dev->dev, desc->data - NET_IP_ALIGN,
++		dma_unmap_single(dev->dev.parent, desc->data - NET_IP_ALIGN,
+ 				 RX_BUFF_SIZE, DMA_FROM_DEVICE);
+ #else
+-		dma_sync_single_for_cpu(&dev->dev, desc->data - NET_IP_ALIGN,
++		dma_sync_single_for_cpu(dev->dev.parent,
++					desc->data - NET_IP_ALIGN,
+ 					RX_BUFF_SIZE, DMA_FROM_DEVICE);
+ 		memcpy_swab32((u32 *)skb->data, (u32 *)port->rx_buff_tab[n],
+ 			      ALIGN(NET_IP_ALIGN + desc->pkt_len, 4) / 4);
+@@ -874,7 +875,7 @@ static int eth_xmit(struct sk_buff *skb,
+ 	memcpy_swab32(mem, (u32 *)((int)skb->data & ~3), bytes / 4);
+ #endif
+ 
+-	phys = dma_map_single(&dev->dev, mem, bytes, DMA_TO_DEVICE);
++	phys = dma_map_single(dev->dev.parent, mem, bytes, DMA_TO_DEVICE);
+ 	if (dma_mapping_error(&dev->dev, phys)) {
+ 		dev_kfree_skb(skb);
+ #ifndef __ARMEB__
+@@ -1124,7 +1125,7 @@ static int init_queues(struct port *port
+ 	int i;
+ 
+ 	if (!ports_open) {
+-		dma_pool = dma_pool_create(DRV_NAME, &port->netdev->dev,
++		dma_pool = dma_pool_create(DRV_NAME, port->netdev->dev.parent,
+ 					   POOL_ALLOC_SIZE, 32, 0);
+ 		if (!dma_pool)
+ 			return -ENOMEM;
+@@ -1152,9 +1153,9 @@ static int init_queues(struct port *port
+ 		data = buff;
+ #endif
+ 		desc->buf_len = MAX_MRU;
+-		desc->data = dma_map_single(&port->netdev->dev, data,
++		desc->data = dma_map_single(port->netdev->dev.parent, data,
+ 					    RX_BUFF_SIZE, DMA_FROM_DEVICE);
+-		if (dma_mapping_error(&port->netdev->dev, desc->data)) {
++		if (dma_mapping_error(port->netdev->dev.parent, desc->data)) {
+ 			free_buffer(buff);
+ 			return -EIO;
+ 		}
+@@ -1174,7 +1175,7 @@ static void destroy_queues(struct port *
+ 			struct desc *desc = rx_desc_ptr(port, i);
+ 			buffer_t *buff = port->rx_buff_tab[i];
+ 			if (buff) {
+-				dma_unmap_single(&port->netdev->dev,
++				dma_unmap_single(port->netdev->dev.parent,
+ 						 desc->data - NET_IP_ALIGN,
+ 						 RX_BUFF_SIZE, DMA_FROM_DEVICE);
+ 				free_buffer(buff);
diff --git a/target/linux/ixp4xx/patches-4.1/020-gateworks_i2c_pld.patch b/target/linux/ixp4xx/patches-4.1/020-gateworks_i2c_pld.patch
new file mode 100644
index 0000000..09b7f42
--- /dev/null
+++ b/target/linux/ixp4xx/patches-4.1/020-gateworks_i2c_pld.patch
@@ -0,0 +1,421 @@
+--- a/drivers/gpio/Kconfig
++++ b/drivers/gpio/Kconfig
+@@ -647,6 +647,14 @@ config GPIO_SX150X
+ 	  8 bits:  sx1508q
+ 	  16 bits: sx1509q
+ 
++config GPIO_GW_I2C_PLD
++	tristate "Gateworks I2C PLD GPIO Expander"
++	depends on I2C
++	help
++		Say yes here to provide access to the Gateworks I2C PLD GPIO
++		Expander. This is used at least on the GW2358-4.
++
++
+ endmenu
+ 
+ menu "MFD GPIO expanders"
+--- a/drivers/gpio/Makefile
++++ b/drivers/gpio/Makefile
+@@ -112,3 +112,4 @@ obj-$(CONFIG_GPIO_XILINX)	+= gpio-xilinx
+ obj-$(CONFIG_GPIO_XTENSA)	+= gpio-xtensa.o
+ obj-$(CONFIG_GPIO_ZEVIO)	+= gpio-zevio.o
+ obj-$(CONFIG_GPIO_ZYNQ)		+= gpio-zynq.o
++obj-$(CONFIG_GPIO_GW_I2C_PLD)	+= gw_i2c_pld.o
+--- /dev/null
++++ b/drivers/gpio/gw_i2c_pld.c
+@@ -0,0 +1,371 @@
++/*
++ * Gateworks I2C PLD GPIO expander
++ *
++ * Copyright (C) 2009 Gateworks Corporation
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
++ */
++
++#include <linux/kernel.h>
++#include <linux/slab.h>
++#include <linux/hardirq.h>
++#include <linux/i2c.h>
++#include <linux/i2c/gw_i2c_pld.h>
++#include <linux/module.h>
++#include <linux/export.h>
++#include <asm/gpio.h>
++#include <mach/hardware.h>
++
++static const struct i2c_device_id gw_i2c_pld_id[] = {
++	{ "gw_i2c_pld", 8 },
++	{ }
++};
++MODULE_DEVICE_TABLE(i2c, gw_i2c_pld_id);
++
++/*
++ * The Gateworks I2C PLD chip only expose one read and one
++ * write register.  Writing a "one" bit (to match the reset state) lets
++ * that pin be used as an input. It is an open-drain model.
++ */
++
++struct gw_i2c_pld {
++	struct gpio_chip	chip;
++	struct i2c_client	*client;
++	unsigned		out;		/* software latch */
++};
++
++/*-------------------------------------------------------------------------*/
++
++/*
++ * The Gateworks I2C PLD chip does not properly send the acknowledge bit
++ * thus we cannot use standard i2c_smbus functions. We have recreated
++ * our own here, but we still use the rt_mutex_lock to lock the i2c_bus
++ * as the device still exists on the I2C bus.
++*/
++
++#define PLD_SCL_GPIO 6
++#define PLD_SDA_GPIO 7
++
++#define SCL_LO()  gpio_line_set(PLD_SCL_GPIO, IXP4XX_GPIO_LOW)
++#define SCL_HI()  gpio_line_set(PLD_SCL_GPIO, IXP4XX_GPIO_HIGH)
++#define SCL_EN()  gpio_line_config(PLD_SCL_GPIO, IXP4XX_GPIO_OUT)
++#define SDA_LO()  gpio_line_set(PLD_SDA_GPIO, IXP4XX_GPIO_LOW)
++#define SDA_HI()  gpio_line_set(PLD_SDA_GPIO, IXP4XX_GPIO_HIGH)
++#define SDA_EN()  gpio_line_config(PLD_SDA_GPIO, IXP4XX_GPIO_OUT)
++#define SDA_DIS() gpio_line_config(PLD_SDA_GPIO, IXP4XX_GPIO_IN)
++#define SDA_IN(x) gpio_line_get(PLD_SDA_GPIO, &x);
++
++static int i2c_pld_write_byte(int address, int byte)
++{
++	int i;
++
++	address = (address << 1) & ~0x1;
++
++	SDA_HI();
++	SDA_EN();
++	SCL_EN();
++	SCL_HI();
++	SDA_LO();
++	SCL_LO();
++
++	for (i = 7; i >= 0; i--)
++	{
++		if (address & (1 << i))
++			SDA_HI();
++		else
++			SDA_LO();
++
++		SCL_HI();
++		SCL_LO();
++	}
++
++	SDA_DIS();
++	SCL_HI();
++	SDA_IN(i);
++	SCL_LO();
++	SDA_EN();
++
++	for (i = 7; i >= 0; i--)
++	{
++		if (byte & (1 << i))
++      SDA_HI();
++		else
++			SDA_LO();
++		SCL_HI();
++		SCL_LO();
++	}
++
++	SDA_DIS();
++	SCL_HI();
++	SDA_IN(i);
++	SCL_LO();
++
++	SDA_HI();
++	SDA_EN();
++
++	SDA_LO();
++	SCL_HI();
++	SDA_HI();
++	SCL_LO();
++	SCL_HI();
++
++	return 0;
++}
++
++static unsigned int i2c_pld_read_byte(int address)
++{
++	int i = 0, byte = 0;
++	int bit;
++
++	address = (address << 1) | 0x1;
++
++	SDA_HI();
++	SDA_EN();
++	SCL_EN();
++	SCL_HI();
++	SDA_LO();
++	SCL_LO();
++
++	for (i = 7; i >= 0; i--)
++	{
++		if (address & (1 << i))
++			SDA_HI();
++		else
++			SDA_LO();
++
++		SCL_HI();
++		SCL_LO();
++	}
++
++	SDA_DIS();
++	SCL_HI();
++	SDA_IN(i);
++	SCL_LO();
++	SDA_EN();
++
++	SDA_DIS();
++	for (i = 7; i >= 0; i--)
++	{
++		SCL_HI();
++		SDA_IN(bit);
++		byte |= bit << i;
++		SCL_LO();
++	}
++
++	SDA_LO();
++	SCL_HI();
++	SDA_HI();
++	SCL_LO();
++	SCL_HI();
++
++	return byte;
++}
++
++
++static int gw_i2c_pld_input8(struct gpio_chip *chip, unsigned offset)
++{
++	int ret;
++	struct gw_i2c_pld *gpio = container_of(chip, struct gw_i2c_pld, chip);
++	struct i2c_adapter *adap = gpio->client->adapter;
++
++	if (in_atomic() || irqs_disabled()) {
++		ret = rt_mutex_trylock(&adap->bus_lock);
++		if (!ret)
++			/* I2C activity is ongoing. */
++			return -EAGAIN;
++	} else {
++		rt_mutex_lock(&adap->bus_lock);
++	}
++
++	gpio->out |= (1 << offset);
++
++	ret = i2c_pld_write_byte(gpio->client->addr, gpio->out);
++
++	rt_mutex_unlock(&adap->bus_lock);
++
++	return ret;
++}
++
++static int gw_i2c_pld_get8(struct gpio_chip *chip, unsigned offset)
++{
++	int ret;
++	s32	value;
++	struct gw_i2c_pld *gpio = container_of(chip, struct gw_i2c_pld, chip);
++	struct i2c_adapter *adap = gpio->client->adapter;
++
++	if (in_atomic() || irqs_disabled()) {
++		ret = rt_mutex_trylock(&adap->bus_lock);
++		if (!ret)
++			/* I2C activity is ongoing. */
++			return -EAGAIN;
++	} else {
++		rt_mutex_lock(&adap->bus_lock);
++	}
++
++	value = i2c_pld_read_byte(gpio->client->addr);
++
++	rt_mutex_unlock(&adap->bus_lock);
++
++	return (value < 0) ? 0 : (value & (1 << offset));
++}
++
++static int gw_i2c_pld_output8(struct gpio_chip *chip, unsigned offset, int value)
++{
++	int ret;
++
++	struct gw_i2c_pld *gpio = container_of(chip, struct gw_i2c_pld, chip);
++	struct i2c_adapter *adap = gpio->client->adapter;
++
++	unsigned bit = 1 << offset;
++
++	if (in_atomic() || irqs_disabled()) {
++		ret = rt_mutex_trylock(&adap->bus_lock);
++		if (!ret)
++			/* I2C activity is ongoing. */
++			return -EAGAIN;
++	} else {
++		rt_mutex_lock(&adap->bus_lock);
++	}
++
++
++	if (value)
++		gpio->out |= bit;
++	else
++		gpio->out &= ~bit;
++
++	ret = i2c_pld_write_byte(gpio->client->addr, gpio->out);
++
++	rt_mutex_unlock(&adap->bus_lock);
++
++	return ret;
++}
++
++static void gw_i2c_pld_set8(struct gpio_chip *chip, unsigned offset, int value)
++{
++	gw_i2c_pld_output8(chip, offset, value);
++}
++
++/*-------------------------------------------------------------------------*/
++
++static int gw_i2c_pld_probe(struct i2c_client *client,
++			 const struct i2c_device_id *id)
++{
++	struct gw_i2c_pld_platform_data	*pdata;
++	struct gw_i2c_pld *gpio;
++	int status;
++
++	pdata = client->dev.platform_data;
++	if (!pdata)
++		return -ENODEV;
++
++	/* Allocate, initialize, and register this gpio_chip. */
++	gpio = kzalloc(sizeof *gpio, GFP_KERNEL);
++	if (!gpio)
++		return -ENOMEM;
++
++	gpio->chip.base = pdata->gpio_base;
++	gpio->chip.can_sleep = 1;
++	gpio->chip.dev = &client->dev;
++	gpio->chip.owner = THIS_MODULE;
++
++	gpio->chip.ngpio = pdata->nr_gpio;
++	gpio->chip.direction_input = gw_i2c_pld_input8;
++	gpio->chip.get = gw_i2c_pld_get8;
++	gpio->chip.direction_output = gw_i2c_pld_output8;
++	gpio->chip.set = gw_i2c_pld_set8;
++
++	gpio->chip.label = client->name;
++
++	gpio->client = client;
++	i2c_set_clientdata(client, gpio);
++
++	gpio->out = 0xFF;
++
++	status = gpiochip_add(&gpio->chip);
++	if (status < 0)
++		goto fail;
++
++	dev_info(&client->dev, "gpios %d..%d on a %s%s\n",
++			gpio->chip.base,
++			gpio->chip.base + gpio->chip.ngpio - 1,
++			client->name,
++			client->irq ? " (irq ignored)" : "");
++
++	/* Let platform code set up the GPIOs and their users.
++	 * Now is the first time anyone could use them.
++	 */
++	if (pdata->setup) {
++		status = pdata->setup(client,
++				gpio->chip.base, gpio->chip.ngpio,
++				pdata->context);
++		if (status < 0)
++			dev_warn(&client->dev, "setup --> %d\n", status);
++	}
++
++	return 0;
++
++fail:
++	dev_dbg(&client->dev, "probe error %d for '%s'\n",
++			status, client->name);
++	kfree(gpio);
++	return status;
++}
++
++static int gw_i2c_pld_remove(struct i2c_client *client)
++{
++	struct gw_i2c_pld_platform_data	*pdata = client->dev.platform_data;
++	struct gw_i2c_pld *gpio = i2c_get_clientdata(client);
++	int				status = 0;
++
++	if (pdata->teardown) {
++		status = pdata->teardown(client,
++				gpio->chip.base, gpio->chip.ngpio,
++				pdata->context);
++		if (status < 0) {
++			dev_err(&client->dev, "%s --> %d\n",
++					"teardown", status);
++			return status;
++		}
++	}
++
++	gpiochip_remove(&gpio->chip);
++	kfree(gpio);
++	return 0;
++}
++
++static struct i2c_driver gw_i2c_pld_driver = {
++	.driver = {
++		.name	= "gw_i2c_pld",
++		.owner	= THIS_MODULE,
++	},
++	.probe	= gw_i2c_pld_probe,
++	.remove	= gw_i2c_pld_remove,
++	.id_table = gw_i2c_pld_id,
++};
++
++static int __init gw_i2c_pld_init(void)
++{
++	return i2c_add_driver(&gw_i2c_pld_driver);
++}
++module_init(gw_i2c_pld_init);
++
++static void __exit gw_i2c_pld_exit(void)
++{
++	i2c_del_driver(&gw_i2c_pld_driver);
++}
++module_exit(gw_i2c_pld_exit);
++
++MODULE_LICENSE("GPL");
++MODULE_AUTHOR("Chris Lang");
+--- /dev/null
++++ b/include/linux/i2c/gw_i2c_pld.h
+@@ -0,0 +1,20 @@
++#ifndef __LINUX_GW_I2C_PLD_H
++#define __LINUX_GW_I2C_PLD_H
++
++/**
++ * The Gateworks I2C PLD Implements an additional 8 bits of GPIO through the PLD
++ */
++
++struct gw_i2c_pld_platform_data {
++	unsigned gpio_base;
++	unsigned nr_gpio;
++	int		(*setup)(struct i2c_client *client,
++					int gpio, unsigned ngpio,
++					void *context);
++	int		(*teardown)(struct i2c_client *client,
++					int gpio, unsigned ngpio,
++					void *context);
++	void		*context;
++};
++
++#endif /* __LINUX_GW_I2C_PLD_H */
diff --git a/target/linux/ixp4xx/patches-4.1/030-gpio_line_config.patch b/target/linux/ixp4xx/patches-4.1/030-gpio_line_config.patch
new file mode 100644
index 0000000..0e51793
--- /dev/null
+++ b/target/linux/ixp4xx/patches-4.1/030-gpio_line_config.patch
@@ -0,0 +1,73 @@
+--- a/arch/arm/mach-ixp4xx/common.c
++++ b/arch/arm/mach-ixp4xx/common.c
+@@ -93,22 +93,7 @@ void __init ixp4xx_map_io(void)
+ /*
+  * GPIO-functions
+  */
+-/*
+- * The following converted to the real HW bits the gpio_line_config
+- */
+-/* GPIO pin types */
+-#define IXP4XX_GPIO_OUT 		0x1
+-#define IXP4XX_GPIO_IN  		0x2
+-
+-/* GPIO signal types */
+-#define IXP4XX_GPIO_LOW			0
+-#define IXP4XX_GPIO_HIGH		1
+-
+-/* GPIO Clocks */
+-#define IXP4XX_GPIO_CLK_0		14
+-#define IXP4XX_GPIO_CLK_1		15
+-
+-static void gpio_line_config(u8 line, u32 direction)
++void gpio_line_config(u8 line, u32 direction)
+ {
+ 	if (direction == IXP4XX_GPIO_IN)
+ 		*IXP4XX_GPIO_GPOER |= (1 << line);
+@@ -116,17 +101,17 @@ static void gpio_line_config(u8 line, u3
+ 		*IXP4XX_GPIO_GPOER &= ~(1 << line);
+ }
+ 
+-static void gpio_line_get(u8 line, int *value)
++void gpio_line_get(u8 line, int *value)
+ {
+ 	*value = (*IXP4XX_GPIO_GPINR >> line) & 0x1;
+ }
+ 
+-static void gpio_line_set(u8 line, int value)
++void gpio_line_set(u8 line, int value)
+ {
+-	if (value == IXP4XX_GPIO_HIGH)
+-	    *IXP4XX_GPIO_GPOUTR |= (1 << line);
+-	else if (value == IXP4XX_GPIO_LOW)
++	if (value == IXP4XX_GPIO_LOW)
+ 	    *IXP4XX_GPIO_GPOUTR &= ~(1 << line);
++	else
++	    *IXP4XX_GPIO_GPOUTR |= (1 << line);
+ }
+ 
+ /*************************************************************************
+--- a/arch/arm/mach-ixp4xx/include/mach/platform.h
++++ b/arch/arm/mach-ixp4xx/include/mach/platform.h
+@@ -131,5 +131,21 @@ struct pci_sys_data;
+ extern int ixp4xx_setup(int nr, struct pci_sys_data *sys);
+ extern struct pci_ops ixp4xx_ops;
+ 
++/* GPIO pin types */
++#define IXP4XX_GPIO_OUT 		0x1
++#define IXP4XX_GPIO_IN  		0x2
++
++/* GPIO signal types */
++#define IXP4XX_GPIO_LOW			0
++#define IXP4XX_GPIO_HIGH		1
++
++/* GPIO Clocks */
++#define IXP4XX_GPIO_CLK_0		14
++#define IXP4XX_GPIO_CLK_1		15
++
++void gpio_line_config(u8 line, u32 direction);
++void gpio_line_get(u8 line, int *value);
++void gpio_line_set(u8 line, int value);
++
+ #endif // __ASSEMBLY__
+ 
diff --git a/target/linux/ixp4xx/patches-4.1/090-increase_entropy_pools.patch b/target/linux/ixp4xx/patches-4.1/090-increase_entropy_pools.patch
new file mode 100644
index 0000000..285505c
--- /dev/null
+++ b/target/linux/ixp4xx/patches-4.1/090-increase_entropy_pools.patch
@@ -0,0 +1,17 @@
+--- a/drivers/char/random.c
++++ b/drivers/char/random.c
+@@ -285,11 +285,11 @@
+ /*
+  * Configuration information
+  */
+-#define INPUT_POOL_SHIFT	12
++#define INPUT_POOL_SHIFT	13
+ #define INPUT_POOL_WORDS	(1 << (INPUT_POOL_SHIFT-5))
+-#define OUTPUT_POOL_SHIFT	10
++#define OUTPUT_POOL_SHIFT	11
+ #define OUTPUT_POOL_WORDS	(1 << (OUTPUT_POOL_SHIFT-5))
+-#define SEC_XFER_SIZE		512
++#define SEC_XFER_SIZE		1024
+ #define EXTRACT_SIZE		10
+ 
+ #define DEBUG_RANDOM_BOOT 0
diff --git a/target/linux/ixp4xx/patches-4.1/100-wg302v2_gateway7001_mac_plat_info.patch b/target/linux/ixp4xx/patches-4.1/100-wg302v2_gateway7001_mac_plat_info.patch
new file mode 100644
index 0000000..317103f
--- /dev/null
+++ b/target/linux/ixp4xx/patches-4.1/100-wg302v2_gateway7001_mac_plat_info.patch
@@ -0,0 +1,78 @@
+--- a/arch/arm/mach-ixp4xx/gateway7001-setup.c
++++ b/arch/arm/mach-ixp4xx/gateway7001-setup.c
+@@ -17,6 +17,7 @@
+ #include <linux/serial.h>
+ #include <linux/tty.h>
+ #include <linux/serial_8250.h>
++#include <linux/dma-mapping.h>
+ 
+ #include <asm/types.h>
+ #include <asm/setup.h>
+@@ -75,9 +76,37 @@ static struct platform_device gateway700
+ 	.resource	= &gateway7001_uart_resource,
+ };
+ 
++static struct eth_plat_info gateway7001_plat_eth[] = {
++	{
++		.phy		= 1,
++		.rxq		= 3,
++		.txreadyq	= 20,
++	}, {
++		.phy		= 2,
++		.rxq		= 4,
++		.txreadyq	= 21,
++	}
++};
++
++static struct platform_device gateway7001_eth[] = {
++	{
++		.name			= "ixp4xx_eth",
++		.id			= IXP4XX_ETH_NPEB,
++		.dev.platform_data	= gateway7001_plat_eth,
++		.dev.coherent_dma_mask	= DMA_BIT_MASK(32),
++	}, {
++		.name			= "ixp4xx_eth",
++		.id			= IXP4XX_ETH_NPEC,
++		.dev.platform_data	= gateway7001_plat_eth + 1,
++		.dev.coherent_dma_mask	= DMA_BIT_MASK(32),
++	}
++};
++
+ static struct platform_device *gateway7001_devices[] __initdata = {
+ 	&gateway7001_flash,
+-	&gateway7001_uart
++	&gateway7001_uart,
++	&gateway7001_eth[0],
++	&gateway7001_eth[1],
+ };
+ 
+ static void __init gateway7001_init(void)
+--- a/arch/arm/mach-ixp4xx/wg302v2-setup.c
++++ b/arch/arm/mach-ixp4xx/wg302v2-setup.c
+@@ -76,9 +76,26 @@ static struct platform_device wg302v2_ua
+ 	.resource	= &wg302v2_uart_resource,
+ };
+ 
++static struct eth_plat_info wg302v2_plat_eth[] = {
++	{
++		.phy		= 8,
++		.rxq		= 3,
++		.txreadyq	= 20,
++	}
++};
++
++static struct platform_device wg302v2_eth[] = {
++	{
++		.name			= "ixp4xx_eth",
++		.id			= IXP4XX_ETH_NPEB,
++		.dev.platform_data	= wg302v2_plat_eth,
++	}
++};
++
+ static struct platform_device *wg302v2_devices[] __initdata = {
+ 	&wg302v2_flash,
+ 	&wg302v2_uart,
++	&wg302v2_eth[0],
+ };
+ 
+ static void __init wg302v2_init(void)
diff --git a/target/linux/ixp4xx/patches-4.1/105-wg302v1_support.patch b/target/linux/ixp4xx/patches-4.1/105-wg302v1_support.patch
new file mode 100644
index 0000000..8793549
--- /dev/null
+++ b/target/linux/ixp4xx/patches-4.1/105-wg302v1_support.patch
@@ -0,0 +1,261 @@
+--- a/arch/arm/configs/ixp4xx_defconfig
++++ b/arch/arm/configs/ixp4xx_defconfig
+@@ -13,6 +13,7 @@ CONFIG_MACH_AVILA=y
+ CONFIG_MACH_LOFT=y
+ CONFIG_ARCH_ADI_COYOTE=y
+ CONFIG_MACH_GATEWAY7001=y
++CONFIG_MACH_WG302V1=y
+ CONFIG_MACH_WG302V2=y
+ CONFIG_ARCH_IXDP425=y
+ CONFIG_MACH_IXDPG425=y
+--- a/arch/arm/mach-ixp4xx/Kconfig
++++ b/arch/arm/mach-ixp4xx/Kconfig
+@@ -45,6 +45,14 @@ config MACH_GATEWAY7001
+ 	  7001 Access Point. For more information on this platform,
+ 	  see http://openwrt.org
+ 
++config MACH_WG302V1
++	bool "Netgear WG302 v1 / WAG302 v1"
++	select PCI
++	help
++	  Say 'Y' here if you want your kernel to support Netgear's
++	  WG302 v1 or WAG302 v1 Access Points. For more information
++	  on this platform, see http://openwrt.org
++
+ config MACH_WG302V2
+ 	bool "Netgear WG302 v2 / WAG302 v2"
+ 	select PCI
+--- a/arch/arm/mach-ixp4xx/Makefile
++++ b/arch/arm/mach-ixp4xx/Makefile
+@@ -15,6 +15,7 @@ obj-pci-$(CONFIG_MACH_NSLU2)		+= nslu2-p
+ obj-pci-$(CONFIG_MACH_NAS100D)		+= nas100d-pci.o
+ obj-pci-$(CONFIG_MACH_DSMG600)		+= dsmg600-pci.o
+ obj-pci-$(CONFIG_MACH_GATEWAY7001)	+= gateway7001-pci.o
++obj-pci-$(CONFIG_MACH_WG302V1)		+= wg302v1-pci.o
+ obj-pci-$(CONFIG_MACH_WG302V2)		+= wg302v2-pci.o
+ obj-pci-$(CONFIG_MACH_FSG)		+= fsg-pci.o
+ obj-pci-$(CONFIG_MACH_ARCOM_VULCAN)	+= vulcan-pci.o
+@@ -33,6 +34,7 @@ obj-$(CONFIG_MACH_NSLU2)	+= nslu2-setup.
+ obj-$(CONFIG_MACH_NAS100D)	+= nas100d-setup.o
+ obj-$(CONFIG_MACH_DSMG600)      += dsmg600-setup.o
+ obj-$(CONFIG_MACH_GATEWAY7001)	+= gateway7001-setup.o
++obj-$(CONFIG_MACH_WG302V1)	+= wg302v1-setup.o
+ obj-$(CONFIG_MACH_WG302V2)	+= wg302v2-setup.o
+ obj-$(CONFIG_MACH_FSG)		+= fsg-setup.o
+ obj-$(CONFIG_MACH_GORAMO_MLR)	+= goramo_mlr.o
+--- /dev/null
++++ b/arch/arm/mach-ixp4xx/wg302v1-pci.c
+@@ -0,0 +1,63 @@
++/*
++ * arch/arch/mach-ixp4xx/wg302v1-pci.c
++ *
++ * PCI setup routines for the Netgear WG302 v1 and WAG302 v1
++ *
++ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
++ *
++ * based on coyote-pci.c:
++ *	Copyright (C) 2002 Jungo Software Technologies.
++ *	Copyright (C) 2003 MontaVista Software, Inc.
++ *
++ * Maintainer: Imre Kaloz <kaloz@openwrt.org>
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ *
++ */
++
++#include <linux/kernel.h>
++#include <linux/pci.h>
++#include <linux/init.h>
++#include <linux/irq.h>
++
++#include <asm/mach-types.h>
++#include <mach/hardware.h>
++
++#include <asm/mach/pci.h>
++
++void __init wg302v1_pci_preinit(void)
++{
++	irq_set_irq_type(IRQ_IXP4XX_GPIO8, IRQ_TYPE_LEVEL_LOW);
++	irq_set_irq_type(IRQ_IXP4XX_GPIO10, IRQ_TYPE_LEVEL_LOW);
++
++	ixp4xx_pci_preinit();
++}
++
++static int __init wg302v1_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
++{
++	if (slot == 1)
++		return IRQ_IXP4XX_GPIO8;
++	else if (slot == 2)
++		return IRQ_IXP4XX_GPIO10;
++	else
++		return -1;
++}
++
++struct hw_pci wg302v1_pci __initdata = {
++	.nr_controllers = 1,
++	.preinit =        wg302v1_pci_preinit,
++	.ops =            &ixp4xx_ops,
++	.setup =          ixp4xx_setup,
++	.map_irq =        wg302v1_map_irq,
++};
++
++int __init wg302v1_pci_init(void)
++{
++	if (machine_is_wg302v1())
++		pci_common_init(&wg302v1_pci);
++	return 0;
++}
++
++subsys_initcall(wg302v1_pci_init);
+--- /dev/null
++++ b/arch/arm/mach-ixp4xx/wg302v1-setup.c
+@@ -0,0 +1,147 @@
++/*
++ * arch/arm/mach-ixp4xx/wg302v1-setup.c
++ *
++ * Board setup for the Netgear WG302 v1 and WAG302 v1
++ *
++ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
++ *
++ * based on coyote-setup.c:
++ *      Copyright (C) 2003-2005 MontaVista Software, Inc.
++ *
++ * Author: Imre Kaloz <kaloz@openwrt.org>
++ *
++ */
++
++#include <linux/kernel.h>
++#include <linux/init.h>
++#include <linux/device.h>
++#include <linux/serial.h>
++#include <linux/tty.h>
++#include <linux/serial_8250.h>
++#include <linux/slab.h>
++#include <linux/types.h>
++#include <linux/memory.h>
++#include <linux/dma-mapping.h>
++
++#include <asm/setup.h>
++#include <mach/hardware.h>
++#include <asm/irq.h>
++#include <asm/mach-types.h>
++#include <asm/mach/arch.h>
++#include <asm/mach/flash.h>
++
++static struct flash_platform_data wg302v1_flash_data = {
++	.map_name	= "cfi_probe",
++	.width		= 2,
++};
++
++static struct resource wg302v1_flash_resource = {
++	.flags		= IORESOURCE_MEM,
++};
++
++static struct platform_device wg302v1_flash = {
++	.name		= "IXP4XX-Flash",
++	.id		= 0,
++	.dev		= {
++		.platform_data = &wg302v1_flash_data,
++	},
++	.num_resources	= 1,
++	.resource	= &wg302v1_flash_resource,
++};
++
++static struct resource wg302v1_uart_resources[] = {
++	{
++		.start	= IXP4XX_UART1_BASE_PHYS,
++		.end	= IXP4XX_UART1_BASE_PHYS + 0x0fff,
++		.flags	= IORESOURCE_MEM,
++	},
++	{
++		.start	= IXP4XX_UART2_BASE_PHYS,
++		.end	= IXP4XX_UART2_BASE_PHYS + 0x0fff,
++		.flags	= IORESOURCE_MEM,
++	}
++};
++
++static struct plat_serial8250_port wg302v1_uart_data[] = {
++	{
++		.mapbase	= IXP4XX_UART1_BASE_PHYS,
++		.membase	= (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET,
++		.irq		= IRQ_IXP4XX_UART1,
++		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
++		.iotype		= UPIO_MEM,
++		.regshift	= 2,
++		.uartclk	= IXP4XX_UART_XTAL,
++	},
++	{
++		.mapbase	= IXP4XX_UART2_BASE_PHYS,
++		.membase	= (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
++		.irq		= IRQ_IXP4XX_UART2,
++		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
++		.iotype		= UPIO_MEM,
++		.regshift	= 2,
++		.uartclk	= IXP4XX_UART_XTAL,
++	},
++	{ },
++};
++
++static struct platform_device wg302v1_uart = {
++	.name		= "serial8250",
++	.id		= PLAT8250_DEV_PLATFORM,
++	.dev			= {
++		.platform_data	= wg302v1_uart_data,
++	},
++	.num_resources	= 2,
++	.resource	= wg302v1_uart_resources,
++};
++
++static struct eth_plat_info wg302v1_plat_eth[] = {
++	{
++		.phy		= 30,
++		.rxq		= 3,
++		.txreadyq	= 20,
++	}
++};
++
++static struct platform_device wg302v1_eth[] = {
++	{
++		.name			= "ixp4xx_eth",
++		.id			= IXP4XX_ETH_NPEB,
++		.dev.platform_data	= wg302v1_plat_eth,
++		.dev.coherent_dma_mask	= DMA_BIT_MASK(32),
++	}
++};
++
++static struct platform_device *wg302v1_devices[] __initdata = {
++	&wg302v1_flash,
++	&wg302v1_uart,
++	&wg302v1_eth[0],
++};
++
++static void __init wg302v1_init(void)
++{
++	ixp4xx_sys_init();
++
++	wg302v1_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
++	wg302v1_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + SZ_32M - 1;
++
++	*IXP4XX_EXP_CS0 |= IXP4XX_FLASH_WRITABLE;
++	*IXP4XX_EXP_CS1 = *IXP4XX_EXP_CS0;
++
++	platform_add_devices(wg302v1_devices, ARRAY_SIZE(wg302v1_devices));
++}
++
++#ifdef CONFIG_MACH_WG302V1
++MACHINE_START(WG302V1, "Netgear WG302 v1 / WAG302 v1")
++	/* Maintainer: Imre Kaloz <kaloz@openwrt.org> */
++	.fixup		= wg302v1_fixup,
++	.map_io		= ixp4xx_map_io,
++	.init_irq	= ixp4xx_init_irq,
++	.init_time	= ixp4xx_timer_init,
++	.atag_offset	= 0x0100,
++	.init_machine	= wg302v1_init,
++#if defined(CONFIG_PCI)
++	.dma_zone_size	= SZ_64M,
++#endif
++	.restart	= ixp4xx_restart,
++MACHINE_END
++#endif
diff --git a/target/linux/ixp4xx/patches-4.1/110-pronghorn_series_support.patch b/target/linux/ixp4xx/patches-4.1/110-pronghorn_series_support.patch
new file mode 100644
index 0000000..d1fdfcb
--- /dev/null
+++ b/target/linux/ixp4xx/patches-4.1/110-pronghorn_series_support.patch
@@ -0,0 +1,393 @@
+--- a/arch/arm/configs/ixp4xx_defconfig
++++ b/arch/arm/configs/ixp4xx_defconfig
+@@ -15,6 +15,8 @@ CONFIG_ARCH_ADI_COYOTE=y
+ CONFIG_MACH_GATEWAY7001=y
+ CONFIG_MACH_WG302V1=y
+ CONFIG_MACH_WG302V2=y
++CONFIG_MACH_PRONGHORN=y
++CONFIG_MACH_PRONGHORNMETRO=y
+ CONFIG_ARCH_IXDP425=y
+ CONFIG_MACH_IXDPG425=y
+ CONFIG_MACH_IXDP465=y
+--- a/arch/arm/mach-ixp4xx/Kconfig
++++ b/arch/arm/mach-ixp4xx/Kconfig
+@@ -61,6 +61,22 @@ config MACH_WG302V2
+ 	  WG302 v2 or WAG302 v2 Access Points. For more information
+ 	  on this platform, see http://openwrt.org
+ 
++config MACH_PRONGHORN
++	bool "ADI Pronghorn series"
++	select PCI
++	help
++	  Say 'Y' here if you want your kernel to support the ADI
++	  Engineering Pronghorn series. For more
++	  information on this platform, see http://www.adiengineering.com
++
++#
++# There're only minimal differences kernel-wise between the Pronghorn and
++# Pronghorn Metro boards - they use different chip selects to drive the
++# CF slot connected to the expansion bus, so we just enable them together.
++#
++config MACH_PRONGHORNMETRO
++	def_bool MACH_PRONGHORN
++
+ config ARCH_IXDP425
+ 	bool "IXDP425"
+ 	help
+--- a/arch/arm/mach-ixp4xx/Makefile
++++ b/arch/arm/mach-ixp4xx/Makefile
+@@ -19,6 +19,7 @@ obj-pci-$(CONFIG_MACH_WG302V1)		+= wg302
+ obj-pci-$(CONFIG_MACH_WG302V2)		+= wg302v2-pci.o
+ obj-pci-$(CONFIG_MACH_FSG)		+= fsg-pci.o
+ obj-pci-$(CONFIG_MACH_ARCOM_VULCAN)	+= vulcan-pci.o
++obj-pci-$(CONFIG_MACH_PRONGHORN)	+= pronghorn-pci.o
+ 
+ obj-y	+= common.o
+ 
+@@ -39,6 +40,7 @@ obj-$(CONFIG_MACH_WG302V2)	+= wg302v2-se
+ obj-$(CONFIG_MACH_FSG)		+= fsg-setup.o
+ obj-$(CONFIG_MACH_GORAMO_MLR)	+= goramo_mlr.o
+ obj-$(CONFIG_MACH_ARCOM_VULCAN)	+= vulcan-setup.o
++obj-$(CONFIG_MACH_PRONGHORN)	+= pronghorn-setup.o
+ 
+ obj-$(CONFIG_PCI)		+= $(obj-pci-$(CONFIG_PCI)) common-pci.o
+ obj-$(CONFIG_IXP4XX_QMGR)	+= ixp4xx_qmgr.o
+--- a/arch/arm/mach-ixp4xx/include/mach/uncompress.h
++++ b/arch/arm/mach-ixp4xx/include/mach/uncompress.h
+@@ -42,7 +42,8 @@ static __inline__ void __arch_decomp_set
+ 	 */
+ 	if (machine_is_adi_coyote() || machine_is_gtwx5715() ||
+ 	    machine_is_gateway7001() || machine_is_wg302v2() ||
+-	    machine_is_devixp() || machine_is_miccpt() || machine_is_mic256())
++	    machine_is_devixp() || machine_is_miccpt() || machine_is_mic256() ||
++	    machine_is_pronghorn() || machine_is_pronghorn_metro())
+ 		uart_base = (volatile u32*) IXP4XX_UART2_BASE_PHYS;
+ 	else
+ 		uart_base = (volatile u32*) IXP4XX_UART1_BASE_PHYS;
+--- /dev/null
++++ b/arch/arm/mach-ixp4xx/pronghorn-pci.c
+@@ -0,0 +1,69 @@
++/*
++ * arch/arch/mach-ixp4xx/pronghorn-pci.c
++ *
++ * PCI setup routines for ADI Engineering Pronghorn series
++ *
++ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
++ *
++ * based on coyote-pci.c:
++ *	Copyright (C) 2002 Jungo Software Technologies.
++ *	Copyright (C) 2003 MontaVista Softwrae, Inc.
++ *
++ * Maintainer: Imre Kaloz <kaloz@openwrt.org>
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ *
++ */
++
++#include <linux/kernel.h>
++#include <linux/pci.h>
++#include <linux/init.h>
++#include <linux/irq.h>
++
++#include <asm/mach-types.h>
++#include <mach/hardware.h>
++
++#include <asm/mach/pci.h>
++
++void __init pronghorn_pci_preinit(void)
++{
++	irq_set_irq_type(IRQ_IXP4XX_GPIO4, IRQ_TYPE_LEVEL_LOW);
++	irq_set_irq_type(IRQ_IXP4XX_GPIO6, IRQ_TYPE_LEVEL_LOW);
++	irq_set_irq_type(IRQ_IXP4XX_GPIO11, IRQ_TYPE_LEVEL_LOW);
++	irq_set_irq_type(IRQ_IXP4XX_GPIO1, IRQ_TYPE_LEVEL_LOW);
++
++	ixp4xx_pci_preinit();
++}
++
++static int __init pronghorn_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
++{
++	if (slot == 13)
++		return IRQ_IXP4XX_GPIO4;
++	else if (slot == 14)
++		return IRQ_IXP4XX_GPIO6;
++	else if (slot == 15)
++		return IRQ_IXP4XX_GPIO11;
++	else if (slot == 16)
++		return IRQ_IXP4XX_GPIO1;
++	else
++		return -1;
++}
++
++struct hw_pci pronghorn_pci __initdata = {
++	.nr_controllers	= 1,
++	.preinit	= pronghorn_pci_preinit,
++	.ops		= &ixp4xx_ops,
++	.setup		= ixp4xx_setup,
++	.map_irq	= pronghorn_map_irq,
++};
++
++int __init pronghorn_pci_init(void)
++{
++	if (machine_is_pronghorn() || machine_is_pronghorn_metro())
++		pci_common_init(&pronghorn_pci);
++	return 0;
++}
++
++subsys_initcall(pronghorn_pci_init);
+--- /dev/null
++++ b/arch/arm/mach-ixp4xx/pronghorn-setup.c
+@@ -0,0 +1,252 @@
++/*
++ * arch/arm/mach-ixp4xx/pronghorn-setup.c
++ *
++ * Board setup for the ADI Engineering Pronghorn series
++ *
++ * Copyright (C) 2008 Imre Kaloz <Kaloz@openwrt.org>
++ *
++ * based on coyote-setup.c:
++ *      Copyright (C) 2003-2005 MontaVista Software, Inc.
++ *
++ * Author: Imre Kaloz <Kaloz@openwrt.org>
++ */
++
++#include <linux/kernel.h>
++#include <linux/init.h>
++#include <linux/device.h>
++#include <linux/serial.h>
++#include <linux/tty.h>
++#include <linux/serial_8250.h>
++#include <linux/slab.h>
++#include <linux/types.h>
++#include <linux/memory.h>
++#include <linux/i2c-gpio.h>
++#include <linux/leds.h>
++#include <linux/dma-mapping.h>
++
++#include <asm/setup.h>
++#include <mach/hardware.h>
++#include <asm/irq.h>
++#include <asm/mach-types.h>
++#include <asm/mach/arch.h>
++#include <asm/mach/flash.h>
++
++static struct flash_platform_data pronghorn_flash_data = {
++	.map_name	= "cfi_probe",
++	.width		= 2,
++};
++
++static struct resource pronghorn_flash_resource = {
++	.flags		= IORESOURCE_MEM,
++};
++
++static struct platform_device pronghorn_flash = {
++	.name		= "IXP4XX-Flash",
++	.id		= 0,
++	.dev		= {
++		.platform_data	= &pronghorn_flash_data,
++	},
++	.num_resources	= 1,
++	.resource	= &pronghorn_flash_resource,
++};
++
++static struct resource pronghorn_uart_resources [] = {
++	{
++		.start		= IXP4XX_UART1_BASE_PHYS,
++		.end		= IXP4XX_UART1_BASE_PHYS + 0x0fff,
++		.flags		= IORESOURCE_MEM
++	},
++	{
++		.start		= IXP4XX_UART2_BASE_PHYS,
++		.end		= IXP4XX_UART2_BASE_PHYS + 0x0fff,
++		.flags		= IORESOURCE_MEM
++	}
++};
++
++static struct plat_serial8250_port pronghorn_uart_data[] = {
++	{
++		.mapbase	= IXP4XX_UART1_BASE_PHYS,
++		.membase	= (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET,
++		.irq		= IRQ_IXP4XX_UART1,
++		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
++		.iotype		= UPIO_MEM,
++		.regshift	= 2,
++		.uartclk	= IXP4XX_UART_XTAL,
++	},
++	{
++		.mapbase	= IXP4XX_UART2_BASE_PHYS,
++		.membase	= (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
++		.irq		= IRQ_IXP4XX_UART2,
++		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
++		.iotype		= UPIO_MEM,
++		.regshift	= 2,
++		.uartclk	= IXP4XX_UART_XTAL,
++	},
++	{ },
++};
++
++static struct platform_device pronghorn_uart = {
++	.name		= "serial8250",
++	.id		= PLAT8250_DEV_PLATFORM,
++	.dev		= {
++		.platform_data	= pronghorn_uart_data,
++	},
++	.num_resources	= 2,
++	.resource	= pronghorn_uart_resources,
++};
++
++static struct i2c_gpio_platform_data pronghorn_i2c_gpio_data = {
++	.sda_pin	= 9,
++	.scl_pin	= 10,
++};
++
++static struct platform_device pronghorn_i2c_gpio = {
++	.name		= "i2c-gpio",
++	.id		= 0,
++	.dev		= {
++		.platform_data	= &pronghorn_i2c_gpio_data,
++	},
++};
++
++static struct gpio_led pronghorn_led_pin[] = {
++	{
++		.name		= "pronghorn:green:status",
++		.gpio		= 7,
++	}
++};
++
++static struct gpio_led_platform_data pronghorn_led_data = {
++	.num_leds		= 1,
++	.leds			= pronghorn_led_pin,
++};
++
++static struct platform_device pronghorn_led = {
++	.name			= "leds-gpio",
++	.id			= -1,
++	.dev.platform_data	= &pronghorn_led_data,
++};
++
++static struct resource pronghorn_pata_resources[] = {
++	{
++		.flags	= IORESOURCE_MEM
++	},
++	{
++		.flags	= IORESOURCE_MEM,
++	},
++	{
++		.name	= "intrq",
++		.start	= IRQ_IXP4XX_GPIO0,
++		.end	= IRQ_IXP4XX_GPIO0,
++		.flags	= IORESOURCE_IRQ,
++	},
++};
++
++static struct ixp4xx_pata_data pronghorn_pata_data = {
++	.cs0_bits	= 0xbfff0043,
++	.cs1_bits	= 0xbfff0043,
++};
++
++static struct platform_device pronghorn_pata = {
++	.name			= "pata_ixp4xx_cf",
++	.id			= 0,
++	.dev.platform_data      = &pronghorn_pata_data,
++	.num_resources		= ARRAY_SIZE(pronghorn_pata_resources),
++	.resource		= pronghorn_pata_resources,
++};
++
++static struct eth_plat_info pronghorn_plat_eth[] = {
++	{
++		.phy		= 0,
++		.rxq		= 3,
++		.txreadyq	= 20,
++	}, {
++		.phy		= 1,
++		.rxq		= 4,
++		.txreadyq	= 21,
++	}
++};
++
++static struct platform_device pronghorn_eth[] = {
++	{
++		.name			= "ixp4xx_eth",
++		.id			= IXP4XX_ETH_NPEB,
++		.dev.platform_data	= pronghorn_plat_eth,
++		.dev.coherent_dma_mask	= DMA_BIT_MASK(32),
++	}, {
++		.name			= "ixp4xx_eth",
++		.id			= IXP4XX_ETH_NPEC,
++		.dev.platform_data	= pronghorn_plat_eth + 1,
++		.dev.coherent_dma_mask	= DMA_BIT_MASK(32),
++	}
++};
++
++static struct platform_device *pronghorn_devices[] __initdata = {
++	&pronghorn_flash,
++	&pronghorn_uart,
++	&pronghorn_led,
++	&pronghorn_eth[0],
++	&pronghorn_eth[1],
++};
++
++static void __init pronghorn_init(void)
++{
++	ixp4xx_sys_init();
++
++	pronghorn_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
++	pronghorn_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + SZ_32M - 1;
++
++	*IXP4XX_EXP_CS0 |= IXP4XX_FLASH_WRITABLE;
++	*IXP4XX_EXP_CS1 = *IXP4XX_EXP_CS0;
++
++	platform_add_devices(pronghorn_devices, ARRAY_SIZE(pronghorn_devices));
++
++	if (machine_is_pronghorn()) {
++		pronghorn_pata_resources[0].start = IXP4XX_EXP_BUS_BASE(2);
++		pronghorn_pata_resources[0].end = IXP4XX_EXP_BUS_END(2);
++
++		pronghorn_pata_resources[1].start = IXP4XX_EXP_BUS_BASE(3);
++		pronghorn_pata_resources[1].end = IXP4XX_EXP_BUS_END(3);
++
++		pronghorn_pata_data.cs0_cfg = IXP4XX_EXP_CS2;
++		pronghorn_pata_data.cs1_cfg = IXP4XX_EXP_CS3;
++	} else {
++		pronghorn_pata_resources[0].start = IXP4XX_EXP_BUS_BASE(3);
++		pronghorn_pata_resources[0].end = IXP4XX_EXP_BUS_END(3);
++
++		pronghorn_pata_resources[1].start = IXP4XX_EXP_BUS_BASE(4);
++		pronghorn_pata_resources[1].end = IXP4XX_EXP_BUS_END(4);
++
++		pronghorn_pata_data.cs0_cfg = IXP4XX_EXP_CS3;
++		pronghorn_pata_data.cs1_cfg = IXP4XX_EXP_CS4;
++
++		platform_device_register(&pronghorn_i2c_gpio);
++	}
++
++	platform_device_register(&pronghorn_pata);
++}
++
++MACHINE_START(PRONGHORN, "ADI Engineering Pronghorn")
++	/* Maintainer: Imre Kaloz <kaloz@openwrt.org> */
++	.map_io		= ixp4xx_map_io,
++	.init_irq	= ixp4xx_init_irq,
++	.init_time	= ixp4xx_timer_init,
++	.atag_offset	= 0x0100,
++	.init_machine	= pronghorn_init,
++#if defined(CONFIG_PCI)
++	.dma_zone_size	= SZ_64M,
++#endif
++	.restart	= ixp4xx_restart,
++MACHINE_END
++
++MACHINE_START(PRONGHORNMETRO, "ADI Engineering Pronghorn Metro")
++	/* Maintainer: Imre Kaloz <kaloz@openwrt.org> */
++	.map_io		= ixp4xx_map_io,
++	.init_irq	= ixp4xx_init_irq,
++	.init_time	= ixp4xx_timer_init,
++	.atag_offset	= 0x0100,
++	.init_machine	= pronghorn_init,
++#if defined(CONFIG_PCI)
++	.dma_zone_size	= SZ_64M,
++#endif
++	.restart	= ixp4xx_restart,
++MACHINE_END
diff --git a/target/linux/ixp4xx/patches-4.1/111-pronghorn_swap_uarts.patch b/target/linux/ixp4xx/patches-4.1/111-pronghorn_swap_uarts.patch
new file mode 100644
index 0000000..ed9f7a7
--- /dev/null
+++ b/target/linux/ixp4xx/patches-4.1/111-pronghorn_swap_uarts.patch
@@ -0,0 +1,44 @@
+--- a/arch/arm/mach-ixp4xx/pronghorn-setup.c
++++ b/arch/arm/mach-ixp4xx/pronghorn-setup.c
+@@ -52,31 +52,31 @@ static struct platform_device pronghorn_
+ 
+ static struct resource pronghorn_uart_resources [] = {
+ 	{
+-		.start		= IXP4XX_UART1_BASE_PHYS,
+-		.end		= IXP4XX_UART1_BASE_PHYS + 0x0fff,
++		.start		= IXP4XX_UART2_BASE_PHYS,
++		.end		= IXP4XX_UART2_BASE_PHYS + 0x0fff,
+ 		.flags		= IORESOURCE_MEM
+ 	},
+ 	{
+-		.start		= IXP4XX_UART2_BASE_PHYS,
+-		.end		= IXP4XX_UART2_BASE_PHYS + 0x0fff,
++		.start		= IXP4XX_UART1_BASE_PHYS,
++		.end		= IXP4XX_UART1_BASE_PHYS + 0x0fff,
+ 		.flags		= IORESOURCE_MEM
+ 	}
+ };
+ 
+ static struct plat_serial8250_port pronghorn_uart_data[] = {
+ 	{
+-		.mapbase	= IXP4XX_UART1_BASE_PHYS,
+-		.membase	= (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET,
+-		.irq		= IRQ_IXP4XX_UART1,
++		.mapbase	= IXP4XX_UART2_BASE_PHYS,
++		.membase	= (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
++		.irq		= IRQ_IXP4XX_UART2,
+ 		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
+ 		.iotype		= UPIO_MEM,
+ 		.regshift	= 2,
+ 		.uartclk	= IXP4XX_UART_XTAL,
+ 	},
+ 	{
+-		.mapbase	= IXP4XX_UART2_BASE_PHYS,
+-		.membase	= (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
+-		.irq		= IRQ_IXP4XX_UART2,
++		.mapbase	= IXP4XX_UART1_BASE_PHYS,
++		.membase	= (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET,
++		.irq		= IRQ_IXP4XX_UART1,
+ 		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
+ 		.iotype		= UPIO_MEM,
+ 		.regshift	= 2,
diff --git a/target/linux/ixp4xx/patches-4.1/115-sidewinder_support.patch b/target/linux/ixp4xx/patches-4.1/115-sidewinder_support.patch
new file mode 100644
index 0000000..20adbb5
--- /dev/null
+++ b/target/linux/ixp4xx/patches-4.1/115-sidewinder_support.patch
@@ -0,0 +1,286 @@
+From 95dac4a842a3c66f69f949b48f9075e16275f77b Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jogo@openwrt.org>
+Date: Sun, 30 Jun 2013 15:48:47 +0200
+Subject: [PATCH 07/36] 115-sidewinder_support.patch
+
+---
+ arch/arm/mach-ixp4xx/Kconfig            |   10 +-
+ arch/arm/mach-ixp4xx/Makefile           |    2 +
+ arch/arm/mach-ixp4xx/sidewinder-pci.c   |   68 ++++++++++++++
+ arch/arm/mach-ixp4xx/sidewinder-setup.c |  151 +++++++++++++++++++++++++++++++
+ 4 files changed, 230 insertions(+), 1 deletion(-)
+ create mode 100644 arch/arm/mach-ixp4xx/sidewinder-pci.c
+ create mode 100644 arch/arm/mach-ixp4xx/sidewinder-setup.c
+
+--- a/arch/arm/mach-ixp4xx/Kconfig
++++ b/arch/arm/mach-ixp4xx/Kconfig
+@@ -77,6 +77,14 @@ config MACH_PRONGHORN
+ config MACH_PRONGHORNMETRO
+ 	def_bool MACH_PRONGHORN
+ 
++config MACH_SIDEWINDER
++	bool "ADI Sidewinder"
++	select PCI
++	help
++	  Say 'Y' here if you want your kernel to support the ADI 
++	  Engineering Sidewinder board. For more information on this
++	  platform, see http://www.adiengineering.com
++
+ config ARCH_IXDP425
+ 	bool "IXDP425"
+ 	help
+@@ -173,7 +181,7 @@ config MACH_ARCOM_VULCAN
+ #
+ config CPU_IXP46X
+ 	bool
+-	depends on MACH_IXDP465
++	depends on MACH_IXDP465 || MACH_SIDEWINDER
+ 	default y
+ 
+ config CPU_IXP43X
+--- a/arch/arm/mach-ixp4xx/Makefile
++++ b/arch/arm/mach-ixp4xx/Makefile
+@@ -20,6 +20,7 @@ obj-pci-$(CONFIG_MACH_WG302V2)		+= wg302
+ obj-pci-$(CONFIG_MACH_FSG)		+= fsg-pci.o
+ obj-pci-$(CONFIG_MACH_ARCOM_VULCAN)	+= vulcan-pci.o
+ obj-pci-$(CONFIG_MACH_PRONGHORN)	+= pronghorn-pci.o
++obj-pci-$(CONFIG_MACH_SIDEWINDER)	+= sidewinder-pci.o
+ 
+ obj-y	+= common.o
+ 
+@@ -41,6 +42,7 @@ obj-$(CONFIG_MACH_FSG)		+= fsg-setup.o
+ obj-$(CONFIG_MACH_GORAMO_MLR)	+= goramo_mlr.o
+ obj-$(CONFIG_MACH_ARCOM_VULCAN)	+= vulcan-setup.o
+ obj-$(CONFIG_MACH_PRONGHORN)	+= pronghorn-setup.o
++obj-$(CONFIG_MACH_SIDEWINDER)	+= sidewinder-setup.o
+ 
+ obj-$(CONFIG_PCI)		+= $(obj-pci-$(CONFIG_PCI)) common-pci.o
+ obj-$(CONFIG_IXP4XX_QMGR)	+= ixp4xx_qmgr.o
+--- /dev/null
++++ b/arch/arm/mach-ixp4xx/sidewinder-pci.c
+@@ -0,0 +1,67 @@
++/*
++ * arch/arch/mach-ixp4xx/pronghornmetro-pci.c
++ *
++ * PCI setup routines for ADI Engineering Sidewinder
++ *
++ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
++ *
++ * based on coyote-pci.c:
++ *	Copyright (C) 2002 Jungo Software Technologies.
++ *	Copyright (C) 2003 MontaVista Softwrae, Inc.
++ *
++ * Maintainer: Imre Kaloz <kaloz@openwrt.org>
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ *
++ */
++
++#include <linux/kernel.h>
++#include <linux/pci.h>
++#include <linux/init.h>
++#include <linux/irq.h>
++
++#include <asm/mach-types.h>
++#include <mach/hardware.h>
++#include <asm/irq.h>
++
++#include <asm/mach/pci.h>
++
++void __init sidewinder_pci_preinit(void)
++{
++	irq_set_irq_type(IRQ_IXP4XX_GPIO11, IRQ_TYPE_LEVEL_LOW);
++	irq_set_irq_type(IRQ_IXP4XX_GPIO10, IRQ_TYPE_LEVEL_LOW);
++	irq_set_irq_type(IRQ_IXP4XX_GPIO9, IRQ_TYPE_LEVEL_LOW);
++
++	ixp4xx_pci_preinit();
++}
++
++static int __init sidewinder_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
++{
++	if (slot == 1)
++		return IRQ_IXP4XX_GPIO11;
++	else if (slot == 2)
++		return IRQ_IXP4XX_GPIO10;
++	else if (slot == 3)
++		return IRQ_IXP4XX_GPIO9;
++	else
++		return -1;
++}
++
++struct hw_pci sidewinder_pci __initdata = {
++	.nr_controllers	= 1,
++	.preinit	= sidewinder_pci_preinit,
++	.ops		= &ixp4xx_ops,
++	.setup		= ixp4xx_setup,
++	.map_irq	= sidewinder_map_irq,
++};
++
++int __init sidewinder_pci_init(void)
++{
++	if (machine_is_sidewinder())
++		pci_common_init(&sidewinder_pci);
++	return 0;
++}
++
++subsys_initcall(sidewinder_pci_init);
+--- /dev/null
++++ b/arch/arm/mach-ixp4xx/sidewinder-setup.c
+@@ -0,0 +1,155 @@
++/*
++ * arch/arm/mach-ixp4xx/sidewinder-setup.c
++ *
++ * Board setup for the ADI Engineering Sidewinder
++ *
++ * Copyright (C) 2008 Imre Kaloz <Kaloz@openwrt.org>
++ *
++ * based on coyote-setup.c:
++ *      Copyright (C) 2003-2005 MontaVista Software, Inc.
++ *
++ * Author: Imre Kaloz <Kaloz@openwrt.org>
++ */
++
++#include <linux/kernel.h>
++#include <linux/serial.h>
++#include <linux/serial_8250.h>
++#include <linux/dma-mapping.h>
++
++#include <asm/mach-types.h>
++#include <asm/mach/arch.h>
++#include <asm/mach/flash.h>
++
++static struct flash_platform_data sidewinder_flash_data = {
++	.map_name	= "cfi_probe",
++	.width		= 2,
++};
++
++static struct resource sidewinder_flash_resource = {
++	.flags		= IORESOURCE_MEM,
++};
++
++static struct platform_device sidewinder_flash = {
++	.name		= "IXP4XX-Flash",
++	.id		= 0,
++	.dev		= {
++		.platform_data = &sidewinder_flash_data,
++	},
++	.num_resources	= 1,
++	.resource	= &sidewinder_flash_resource,
++};
++
++static struct resource sidewinder_uart_resources[] = {
++	{
++		.start	= IXP4XX_UART1_BASE_PHYS,
++		.end	= IXP4XX_UART1_BASE_PHYS + 0x0fff,
++		.flags	= IORESOURCE_MEM,
++	},
++	{
++		.start	= IXP4XX_UART2_BASE_PHYS,
++		.end	= IXP4XX_UART2_BASE_PHYS + 0x0fff,
++		.flags	= IORESOURCE_MEM,
++	}
++};
++
++static struct plat_serial8250_port sidewinder_uart_data[] = {
++	{
++		.mapbase	= IXP4XX_UART1_BASE_PHYS,
++		.membase	= (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET,
++		.irq		= IRQ_IXP4XX_UART1,
++		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
++		.iotype		= UPIO_MEM,
++		.regshift	= 2,
++		.uartclk	= IXP4XX_UART_XTAL,
++	},
++	{
++		.mapbase	= IXP4XX_UART2_BASE_PHYS,
++		.membase	= (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
++		.irq		= IRQ_IXP4XX_UART2,
++		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
++		.iotype		= UPIO_MEM,
++		.regshift	= 2,
++		.uartclk	= IXP4XX_UART_XTAL,
++	},
++	{ },
++};
++
++static struct platform_device sidewinder_uart = {
++	.name		= "serial8250",
++	.id		= PLAT8250_DEV_PLATFORM,
++	.dev		= {
++		.platform_data	= sidewinder_uart_data,
++	},
++	.num_resources	= ARRAY_SIZE(sidewinder_uart_resources),
++	.resource	= sidewinder_uart_resources,
++};
++
++static struct eth_plat_info sidewinder_plat_eth[] = {
++	{
++		.phy		= 5,
++		.rxq		= 3,
++		.txreadyq	= 20,
++	}, {
++		.phy		= IXP4XX_ETH_PHY_MAX_ADDR,
++		.phy_mask	= 0x1e,
++		.rxq		= 4,
++		.txreadyq	= 21,
++	}, {
++		.phy		= 31,
++		.rxq		= 2,
++		.txreadyq	= 19,
++	}
++};
++
++static struct platform_device sidewinder_eth[] = {
++	{
++		.name			= "ixp4xx_eth",
++		.id			= IXP4XX_ETH_NPEB,
++		.dev.platform_data	= sidewinder_plat_eth,
++		.dev.coherent_dma_mask	= DMA_BIT_MASK(32),
++	}, {
++		.name			= "ixp4xx_eth",
++		.id			= IXP4XX_ETH_NPEC,
++		.dev.platform_data	= sidewinder_plat_eth + 1,
++		.dev.coherent_dma_mask	= DMA_BIT_MASK(32),
++	}, {
++		.name			= "ixp4xx_eth",
++		.id			= IXP4XX_ETH_NPEA,
++		.dev.platform_data	= sidewinder_plat_eth + 2,
++		.dev.coherent_dma_mask	= DMA_BIT_MASK(32),
++	}
++};
++
++static struct platform_device *sidewinder_devices[] __initdata = {
++	&sidewinder_flash,
++	&sidewinder_uart,
++	&sidewinder_eth[0],
++	&sidewinder_eth[1],
++	&sidewinder_eth[2],
++};
++
++static void __init sidewinder_init(void)
++{
++	ixp4xx_sys_init();
++
++	sidewinder_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
++	sidewinder_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + SZ_64M - 1;
++
++	*IXP4XX_EXP_CS0 |= IXP4XX_FLASH_WRITABLE;
++	*IXP4XX_EXP_CS1 = *IXP4XX_EXP_CS0;
++
++	platform_add_devices(sidewinder_devices, ARRAY_SIZE(sidewinder_devices));
++}
++
++MACHINE_START(SIDEWINDER, "ADI Engineering Sidewinder")
++	/* Maintainer: Imre Kaloz <kaloz@openwrt.org> */
++	.map_io		= ixp4xx_map_io,
++	.init_irq	= ixp4xx_init_irq,
++	.init_time	= ixp4xx_timer_init,
++	.atag_offset	= 0x0100,
++	.init_machine	= sidewinder_init,
++#if defined(CONFIG_PCI)
++	.dma_zone_size	= SZ_64M,
++#endif
++	.restart	= ixp4xx_restart,
++MACHINE_END
diff --git a/target/linux/ixp4xx/patches-4.1/116-sidewinder_fis_location.patch b/target/linux/ixp4xx/patches-4.1/116-sidewinder_fis_location.patch
new file mode 100644
index 0000000..7d633f7
--- /dev/null
+++ b/target/linux/ixp4xx/patches-4.1/116-sidewinder_fis_location.patch
@@ -0,0 +1,30 @@
+--- a/drivers/mtd/redboot.c
++++ b/drivers/mtd/redboot.c
+@@ -30,6 +30,8 @@
+ #include <linux/mtd/partitions.h>
+ #include <linux/module.h>
+ 
++#include <asm/mach-types.h>
++
+ struct fis_image_desc {
+     unsigned char name[16];      // Null terminated name
+     uint32_t	  flash_base;    // Address within FLASH of image
+@@ -47,7 +49,8 @@ struct fis_list {
+ 	struct fis_list *next;
+ };
+ 
+-static int directory = CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK;
++int directory = CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK;
++
+ module_param(directory, int, 0);
+ 
+ static inline int redboot_checksum(struct fis_image_desc *img)
+@@ -75,6 +78,8 @@ static int parse_redboot_partitions(stru
+ #ifdef CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED
+ 	static char nullstring[] = "unallocated";
+ #endif
++	if (machine_is_sidewinder())
++		directory = -5;
+ 
+ 	if ( directory < 0 ) {
+ 		offset = master->size + directory * master->erasesize;
diff --git a/target/linux/ixp4xx/patches-4.1/120-compex_support.patch b/target/linux/ixp4xx/patches-4.1/120-compex_support.patch
new file mode 100644
index 0000000..2abc159
--- /dev/null
+++ b/target/linux/ixp4xx/patches-4.1/120-compex_support.patch
@@ -0,0 +1,199 @@
+From 24025a2dcf1248079dd3019fac6ed955252d277f Mon Sep 17 00:00:00 2001
+From: Imre Kaloz <kaloz@openwrt.org>
+Date: Mon, 14 Jul 2008 21:56:34 +0200
+Subject: [PATCH] Add support for the Compex WP18 / NP18A boards
+
+Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
+---
+
+--- a/arch/arm/mach-ixp4xx/Kconfig
++++ b/arch/arm/mach-ixp4xx/Kconfig
+@@ -85,6 +85,14 @@ config MACH_SIDEWINDER
+ 	  Engineering Sidewinder board. For more information on this
+ 	  platform, see http://www.adiengineering.com
+ 
++config MACH_COMPEXWP18
++	bool "Compex WP18 / NP18A"
++	select PCI
++	help
++	  Say 'Y' here if you want your kernel to support Compex' 
++	  WP18 or NP18A boards. For more information on this
++	  platform, see http://www.compex.com.sg/home/OEM/product_ap.htm
++
+ config ARCH_IXDP425
+ 	bool "IXDP425"
+ 	help
+--- a/arch/arm/mach-ixp4xx/Makefile
++++ b/arch/arm/mach-ixp4xx/Makefile
+@@ -21,6 +21,7 @@ obj-pci-$(CONFIG_MACH_FSG)		+= fsg-pci.o
+ obj-pci-$(CONFIG_MACH_ARCOM_VULCAN)	+= vulcan-pci.o
+ obj-pci-$(CONFIG_MACH_PRONGHORN)	+= pronghorn-pci.o
+ obj-pci-$(CONFIG_MACH_SIDEWINDER)	+= sidewinder-pci.o
++obj-pci-$(CONFIG_MACH_COMPEXWP18)	+= ixdp425-pci.o
+ 
+ obj-y	+= common.o
+ 
+@@ -43,6 +44,7 @@ obj-$(CONFIG_MACH_GORAMO_MLR)	+= goramo_
+ obj-$(CONFIG_MACH_ARCOM_VULCAN)	+= vulcan-setup.o
+ obj-$(CONFIG_MACH_PRONGHORN)	+= pronghorn-setup.o
+ obj-$(CONFIG_MACH_SIDEWINDER)	+= sidewinder-setup.o
++obj-$(CONFIG_MACH_COMPEXWP18)	+= compex42x-setup.o
+ 
+ obj-$(CONFIG_PCI)		+= $(obj-pci-$(CONFIG_PCI)) common-pci.o
+ obj-$(CONFIG_IXP4XX_QMGR)	+= ixp4xx_qmgr.o
+--- /dev/null
++++ b/arch/arm/mach-ixp4xx/compex42x-setup.c
+@@ -0,0 +1,141 @@
++/*
++ * arch/arm/mach-ixp4xx/compex-setup.c
++ *
++ * Compex WP18 / NP18A board-setup
++ *
++ * Copyright (C) 2008 Imre Kaloz <Kaloz@openwrt.org>
++ *
++ * based on coyote-setup.c:
++ *	Copyright (C) 2003-2005 MontaVista Software, Inc.
++ *
++ * Author: Imre Kaloz <Kaloz@openwrt.org>
++ */
++
++#include <linux/kernel.h>
++#include <linux/serial.h>
++#include <linux/serial_8250.h>
++#include <linux/dma-mapping.h>
++
++#include <asm/mach-types.h>
++#include <asm/mach/arch.h>
++#include <asm/mach/flash.h>
++
++static struct flash_platform_data compex42x_flash_data = {
++	.map_name	= "cfi_probe",
++	.width		= 2,
++};
++
++static struct resource compex42x_flash_resource = {
++	.flags		= IORESOURCE_MEM,
++};
++
++static struct platform_device compex42x_flash = {
++	.name		= "IXP4XX-Flash",
++	.id		= 0,
++	.dev		= {
++		.platform_data = &compex42x_flash_data,
++	},
++	.num_resources	= 1,
++	.resource	= &compex42x_flash_resource,
++};
++
++static struct resource compex42x_uart_resources[] = {
++	{
++		.start		= IXP4XX_UART1_BASE_PHYS,
++		.end		= IXP4XX_UART1_BASE_PHYS + 0x0fff,
++		.flags		= IORESOURCE_MEM
++	},
++	{
++		.start		= IXP4XX_UART2_BASE_PHYS,
++		.end		= IXP4XX_UART2_BASE_PHYS + 0x0fff,
++		.flags		= IORESOURCE_MEM
++	}
++};
++
++static struct plat_serial8250_port compex42x_uart_data[] = {
++	{
++		.mapbase	= IXP4XX_UART1_BASE_PHYS,
++		.membase	= (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET,
++		.irq		= IRQ_IXP4XX_UART1,
++		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
++		.iotype		= UPIO_MEM,
++		.regshift	= 2,
++		.uartclk	= IXP4XX_UART_XTAL,
++	},
++	{
++		.mapbase	= IXP4XX_UART2_BASE_PHYS,
++		.membase	= (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
++		.irq		= IRQ_IXP4XX_UART2,
++		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
++		.iotype		= UPIO_MEM,
++		.regshift	= 2,
++		.uartclk	= IXP4XX_UART_XTAL,
++	},
++	{ },
++};
++
++static struct platform_device compex42x_uart = {
++	.name			= "serial8250",
++	.id			= PLAT8250_DEV_PLATFORM,
++	.dev.platform_data	= compex42x_uart_data,
++	.num_resources		= 2,
++	.resource		= compex42x_uart_resources,
++};
++
++static struct eth_plat_info compex42x_plat_eth[] = {
++	{
++		.phy		= IXP4XX_ETH_PHY_MAX_ADDR,
++		.phy_mask	= 0xf0000,
++		.rxq		= 3,
++		.txreadyq	= 20,
++	}, {
++		.phy		= 3,
++		.rxq		= 4,
++		.txreadyq	= 21,
++	}
++};
++
++static struct platform_device compex42x_eth[] = {
++	{
++		.name			= "ixp4xx_eth",
++		.id			= IXP4XX_ETH_NPEB,
++		.dev.platform_data	= compex42x_plat_eth,
++		.dev.coherent_dma_mask	= DMA_BIT_MASK(32),
++	}, {
++		.name			= "ixp4xx_eth",
++		.id			= IXP4XX_ETH_NPEC,
++		.dev.platform_data	= compex42x_plat_eth + 1,
++		.dev.coherent_dma_mask	= DMA_BIT_MASK(32),
++	}
++};
++
++static struct platform_device *compex42x_devices[] __initdata = {
++	&compex42x_flash,
++	&compex42x_uart,
++	&compex42x_eth[0],
++	&compex42x_eth[1],
++};
++
++static void __init compex42x_init(void)
++{
++	ixp4xx_sys_init();
++
++	compex42x_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
++	compex42x_flash_resource.end =
++		IXP4XX_EXP_BUS_BASE(0) + SZ_32M - 1;
++
++	platform_add_devices(compex42x_devices, ARRAY_SIZE(compex42x_devices));
++}
++
++MACHINE_START(COMPEXWP18, "Compex WP18 / NP18A")
++	/* Maintainer: Imre Kaloz <Kaloz@openwrt.org> */
++	.map_io		= ixp4xx_map_io,
++	.init_irq	= ixp4xx_init_irq,
++	.init_time	= ixp4xx_timer_init,
++	.atag_offset	= 0x0100,
++	.init_machine	= compex42x_init,
++#if defined(CONFIG_PCI)
++	.dma_zone_size	= SZ_64M,
++#endif
++	.restart	= ixp4xx_restart,
++MACHINE_END
+--- a/arch/arm/mach-ixp4xx/ixdp425-pci.c
++++ b/arch/arm/mach-ixp4xx/ixdp425-pci.c
+@@ -69,7 +69,8 @@ struct hw_pci ixdp425_pci __initdata = {
+ int __init ixdp425_pci_init(void)
+ {
+ 	if (machine_is_ixdp425() || machine_is_ixcdp1100() ||
+-			machine_is_ixdp465() || machine_is_kixrp435())
++			machine_is_ixdp465() || machine_is_kixrp435() ||
++			machine_is_compex42x())
+ 		pci_common_init(&ixdp425_pci);
+ 	return 0;
+ }
diff --git a/target/linux/ixp4xx/patches-4.1/130-wrt300nv2_support.patch b/target/linux/ixp4xx/patches-4.1/130-wrt300nv2_support.patch
new file mode 100644
index 0000000..49359be
--- /dev/null
+++ b/target/linux/ixp4xx/patches-4.1/130-wrt300nv2_support.patch
@@ -0,0 +1,227 @@
+--- a/arch/arm/mach-ixp4xx/Kconfig
++++ b/arch/arm/mach-ixp4xx/Kconfig
+@@ -93,6 +93,14 @@ config MACH_COMPEXWP18
+ 	  WP18 or NP18A boards. For more information on this
+ 	  platform, see http://www.compex.com.sg/home/OEM/product_ap.htm
+ 
++config MACH_WRT300NV2
++	bool "Linksys WRT300N v2"
++	select PCI
++	help
++	  Say 'Y' here if you want your kernel to support Linksys'
++	  WRT300N v2 router. For more information on this
++	  platform, see http://openwrt.org
++
+ config ARCH_IXDP425
+ 	bool "IXDP425"
+ 	help
+--- a/arch/arm/mach-ixp4xx/Makefile
++++ b/arch/arm/mach-ixp4xx/Makefile
+@@ -22,6 +22,7 @@ obj-pci-$(CONFIG_MACH_ARCOM_VULCAN)	+= v
+ obj-pci-$(CONFIG_MACH_PRONGHORN)	+= pronghorn-pci.o
+ obj-pci-$(CONFIG_MACH_SIDEWINDER)	+= sidewinder-pci.o
+ obj-pci-$(CONFIG_MACH_COMPEXWP18)	+= ixdp425-pci.o
++obj-pci-$(CONFIG_MACH_WRT300NV2)		+= wrt300nv2-pci.o
+ 
+ obj-y	+= common.o
+ 
+@@ -45,6 +46,7 @@ obj-$(CONFIG_MACH_ARCOM_VULCAN)	+= vulca
+ obj-$(CONFIG_MACH_PRONGHORN)	+= pronghorn-setup.o
+ obj-$(CONFIG_MACH_SIDEWINDER)	+= sidewinder-setup.o
+ obj-$(CONFIG_MACH_COMPEXWP18)	+= compex42x-setup.o
++obj-$(CONFIG_MACH_WRT300NV2)	+= wrt300nv2-setup.o
+ 
+ obj-$(CONFIG_PCI)		+= $(obj-pci-$(CONFIG_PCI)) common-pci.o
+ obj-$(CONFIG_IXP4XX_QMGR)	+= ixp4xx_qmgr.o
+--- a/arch/arm/mach-ixp4xx/include/mach/uncompress.h
++++ b/arch/arm/mach-ixp4xx/include/mach/uncompress.h
+@@ -43,7 +43,8 @@ static __inline__ void __arch_decomp_set
+ 	if (machine_is_adi_coyote() || machine_is_gtwx5715() ||
+ 	    machine_is_gateway7001() || machine_is_wg302v2() ||
+ 	    machine_is_devixp() || machine_is_miccpt() || machine_is_mic256() ||
+-	    machine_is_pronghorn() || machine_is_pronghorn_metro())
++	    machine_is_pronghorn() || machine_is_pronghorn_metro() ||
++	    machine_is_wrt300nv2())
+ 		uart_base = (volatile u32*) IXP4XX_UART2_BASE_PHYS;
+ 	else
+ 		uart_base = (volatile u32*) IXP4XX_UART1_BASE_PHYS;
+--- /dev/null
++++ b/arch/arm/mach-ixp4xx/wrt300nv2-pci.c
+@@ -0,0 +1,64 @@
++/*
++ * arch/arch/mach-ixp4xx/wrt300nv2-pci.c
++ *
++ * PCI setup routines for Linksys WRT300N v2
++ *
++ * Copyright (C) 2007 Imre Kaloz <kaloz@openwrt.org>
++ *
++ * based on coyote-pci.c:
++ *	Copyright (C) 2002 Jungo Software Technologies.
++ *	Copyright (C) 2003 MontaVista Softwrae, Inc.
++ *
++ * Maintainer: Imre Kaloz <kaloz@openwrt.org>
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ *
++ */
++
++#include <linux/kernel.h>
++#include <linux/pci.h>
++#include <linux/init.h>
++#include <linux/irq.h>
++
++#include <asm/mach-types.h>
++#include <mach/hardware.h>
++#include <asm/irq.h>
++
++#include <asm/mach/pci.h>
++
++extern void ixp4xx_pci_preinit(void);
++extern int ixp4xx_setup(int nr, struct pci_sys_data *sys);
++extern struct pci_bus *ixp4xx_scan_bus(int nr, struct pci_sys_data *sys);
++
++void __init wrt300nv2_pci_preinit(void)
++{
++	irq_set_irq_type(IRQ_IXP4XX_GPIO8, IRQ_TYPE_LEVEL_LOW);
++
++	ixp4xx_pci_preinit();
++}
++
++static int __init wrt300nv2_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
++{
++	if (slot == 1)
++		return IRQ_IXP4XX_GPIO8;
++	else return -1;
++}
++
++struct hw_pci wrt300nv2_pci __initdata = {
++	.nr_controllers = 1,
++	.preinit	= wrt300nv2_pci_preinit,
++	.ops		= &ixp4xx_ops,
++	.setup		= ixp4xx_setup,
++	.map_irq	= wrt300nv2_map_irq,
++};
++
++int __init wrt300nv2_pci_init(void)
++{
++	if (machine_is_wrt300nv2())
++		pci_common_init(&wrt300nv2_pci);
++	return 0;
++}
++
++subsys_initcall(wrt300nv2_pci_init);
+--- /dev/null
++++ b/arch/arm/mach-ixp4xx/wrt300nv2-setup.c
+@@ -0,0 +1,110 @@
++/*
++ * arch/arm/mach-ixp4xx/wrt300nv2-setup.c
++ *
++ * Board setup for the Linksys WRT300N v2
++ *
++ * Copyright (C) 2007 Imre Kaloz <Kaloz@openwrt.org>
++ *
++ * based on coyote-setup.c:
++ *      Copyright (C) 2003-2005 MontaVista Software, Inc.
++ *
++ * Author: Imre Kaloz <Kaloz@openwrt.org>
++ */
++
++#include <linux/kernel.h>
++#include <linux/init.h>
++#include <linux/device.h>
++#include <linux/serial.h>
++#include <linux/tty.h>
++#include <linux/serial_8250.h>
++#include <linux/slab.h>
++
++#include <asm/types.h>
++#include <asm/setup.h>
++#include <asm/memory.h>
++#include <mach/hardware.h>
++#include <asm/irq.h>
++#include <asm/mach-types.h>
++#include <asm/mach/arch.h>
++#include <asm/mach/flash.h>
++
++static struct flash_platform_data wrt300nv2_flash_data = {
++	.map_name	= "cfi_probe",
++	.width		= 2,
++};
++
++static struct resource wrt300nv2_flash_resource = {
++	.flags		= IORESOURCE_MEM,
++};
++
++static struct platform_device wrt300nv2_flash = {
++	.name		= "IXP4XX-Flash",
++	.id		= 0,
++	.dev		= {
++		.platform_data = &wrt300nv2_flash_data,
++	},
++	.num_resources	= 1,
++	.resource	= &wrt300nv2_flash_resource,
++};
++
++static struct resource wrt300nv2_uart_resource = {
++	.start	= IXP4XX_UART2_BASE_PHYS,
++	.end	= IXP4XX_UART2_BASE_PHYS + 0x0fff,
++	.flags	= IORESOURCE_MEM,
++};
++
++static struct plat_serial8250_port wrt300nv2_uart_data[] = {
++	{
++		.mapbase	= IXP4XX_UART2_BASE_PHYS,
++		.membase	= (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
++		.irq		= IRQ_IXP4XX_UART2,
++		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
++		.iotype		= UPIO_MEM,
++		.regshift	= 2,
++		.uartclk	= IXP4XX_UART_XTAL,
++	},
++	{ },
++};
++
++static struct platform_device wrt300nv2_uart = {
++	.name		= "serial8250",
++	.id		= PLAT8250_DEV_PLATFORM,
++	.dev			= {
++		.platform_data	= wrt300nv2_uart_data,
++	},
++	.num_resources	= 1,
++	.resource	= &wrt300nv2_uart_resource,
++};
++
++static struct platform_device *wrt300nv2_devices[] __initdata = {
++	&wrt300nv2_flash,
++	&wrt300nv2_uart
++};
++
++static void __init wrt300nv2_init(void)
++{
++	ixp4xx_sys_init();
++
++	wrt300nv2_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
++	wrt300nv2_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + SZ_32M - 1;
++
++	*IXP4XX_EXP_CS0 |= IXP4XX_FLASH_WRITABLE;
++	*IXP4XX_EXP_CS1 = *IXP4XX_EXP_CS0;
++
++	platform_add_devices(wrt300nv2_devices, ARRAY_SIZE(wrt300nv2_devices));
++}
++
++#ifdef CONFIG_MACH_WRT300NV2
++MACHINE_START(WRT300NV2, "Linksys WRT300N v2")
++	/* Maintainer: Imre Kaloz <kaloz@openwrt.org> */
++	.map_io		= ixp4xx_map_io,
++	.init_irq	= ixp4xx_init_irq,
++	.init_time	= ixp4xx_timer_init,
++	.atag_offset	= 0x0100,
++	.init_machine	= wrt300nv2_init,
++#if defined(CONFIG_PCI)
++	.dma_zone_size	= SZ_64M,
++#endif
++	.restart	= ixp4xx_restart,
++MACHINE_END
++#endif
diff --git a/target/linux/ixp4xx/patches-4.1/131-wrt300nv2_mac_plat_info.patch b/target/linux/ixp4xx/patches-4.1/131-wrt300nv2_mac_plat_info.patch
new file mode 100644
index 0000000..5debbf1
--- /dev/null
+++ b/target/linux/ixp4xx/patches-4.1/131-wrt300nv2_mac_plat_info.patch
@@ -0,0 +1,42 @@
+--- a/arch/arm/mach-ixp4xx/wrt300nv2-setup.c
++++ b/arch/arm/mach-ixp4xx/wrt300nv2-setup.c
+@@ -76,9 +76,38 @@ static struct platform_device wrt300nv2_
+ 	.resource	= &wrt300nv2_uart_resource,
+ };
+ 
++/* Built-in 10/100 Ethernet MAC interfaces */
++static struct eth_plat_info wrt300nv2_plat_eth[] = {
++	{
++		.phy		= -1,
++		.rxq		= 3,
++		.txreadyq	= 20,
++	}, {
++		.phy		= 1,
++		.rxq		= 4,
++		.txreadyq	= 21,
++	}
++};
++
++static struct platform_device wrt300nv2_eth[] = {
++	{
++		.name			= "ixp4xx_eth",
++		.id			= IXP4XX_ETH_NPEB,
++		.dev.platform_data	= wrt300nv2_plat_eth,
++		.dev.coherent_dma_mask	= DMA_BIT_MASK(32),
++	}, {
++		.name			= "ixp4xx_eth",
++		.id			= IXP4XX_ETH_NPEC,
++		.dev.platform_data	= wrt300nv2_plat_eth + 1,
++		.dev.coherent_dma_mask	= DMA_BIT_MASK(32),
++	}
++};
++
+ static struct platform_device *wrt300nv2_devices[] __initdata = {
+ 	&wrt300nv2_flash,
+-	&wrt300nv2_uart
++	&wrt300nv2_uart,
++	&wrt300nv2_eth[0],
++	&wrt300nv2_eth[1],
+ };
+ 
+ static void __init wrt300nv2_init(void)
diff --git a/target/linux/ixp4xx/patches-4.1/132-wrt300nv2_mac_fix.patch b/target/linux/ixp4xx/patches-4.1/132-wrt300nv2_mac_fix.patch
new file mode 100644
index 0000000..99db267
--- /dev/null
+++ b/target/linux/ixp4xx/patches-4.1/132-wrt300nv2_mac_fix.patch
@@ -0,0 +1,72 @@
+--- a/arch/arm/mach-ixp4xx/wrt300nv2-setup.c
++++ b/arch/arm/mach-ixp4xx/wrt300nv2-setup.c
+@@ -3,6 +3,7 @@
+  *
+  * Board setup for the Linksys WRT300N v2
+  *
++ * Copyright (C) 2010 Alexandros C. Couloumbis <alex@ozo.com>
+  * Copyright (C) 2007 Imre Kaloz <Kaloz@openwrt.org>
+  *
+  * based on coyote-setup.c:
+@@ -18,6 +19,7 @@
+ #include <linux/tty.h>
+ #include <linux/serial_8250.h>
+ #include <linux/slab.h>
++#include <linux/etherdevice.h>
+ 
+ #include <asm/types.h>
+ #include <asm/setup.h>
+@@ -79,7 +81,8 @@ static struct platform_device wrt300nv2_
+ /* Built-in 10/100 Ethernet MAC interfaces */
+ static struct eth_plat_info wrt300nv2_plat_eth[] = {
+ 	{
+-		.phy		= -1,
++		.phy		= IXP4XX_ETH_PHY_MAX_ADDR,
++		.phy_mask	= 0x0F0000,
+ 		.rxq		= 3,
+ 		.txreadyq	= 20,
+ 	}, {
+@@ -112,6 +115,10 @@ static struct platform_device *wrt300nv2
+ 
+ static void __init wrt300nv2_init(void)
+ {
++	uint8_t __iomem *f;
++	int offset = 0;
++	int i;
++
+ 	ixp4xx_sys_init();
+ 
+ 	wrt300nv2_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
+@@ -121,6 +128,32 @@ static void __init wrt300nv2_init(void)
+ 	*IXP4XX_EXP_CS1 = *IXP4XX_EXP_CS0;
+ 
+ 	platform_add_devices(wrt300nv2_devices, ARRAY_SIZE(wrt300nv2_devices));
++
++	f = ioremap(IXP4XX_EXP_BUS_BASE(0), 0x60000);
++
++	if (f) {
++		for (i = 0; i < 6; i++) {
++#ifdef __ARMEB__
++			wrt300nv2_plat_eth[0].hwaddr[i] = readb(f + 0x5FFA0 + i);
++			if (i == 5)
++				offset = 1;
++			wrt300nv2_plat_eth[1].hwaddr[i] = (wrt300nv2_plat_eth[0].hwaddr[i] + offset);
++#else
++			wrt300nv2_plat_eth[0].hwaddr[i] = readb(f + 0x5FFA0 + (i^3));
++			if (i == 5)
++				offset = 1;
++			wrt300nv2_plat_eth[1].hwaddr[i] = (wrt300nv2_plat_eth[0].hwaddr[i] + offset);
++#endif
++		}
++		iounmap(f);
++	}
++
++	if (!(is_valid_ether_addr(wrt300nv2_plat_eth[0].hwaddr)))
++		random_ether_addr(wrt300nv2_plat_eth[0].hwaddr);
++	if (!(is_valid_ether_addr(wrt300nv2_plat_eth[1].hwaddr))) {
++		memcpy(wrt300nv2_plat_eth[1].hwaddr, wrt300nv2_plat_eth[0].hwaddr, ETH_ALEN);
++		wrt300nv2_plat_eth[1].hwaddr[5] = (wrt300nv2_plat_eth[0].hwaddr[5] + 1);
++	}
+ }
+ 
+ #ifdef CONFIG_MACH_WRT300NV2
diff --git a/target/linux/ixp4xx/patches-4.1/150-lanready_ap1000_support.patch b/target/linux/ixp4xx/patches-4.1/150-lanready_ap1000_support.patch
new file mode 100644
index 0000000..ad09efd
--- /dev/null
+++ b/target/linux/ixp4xx/patches-4.1/150-lanready_ap1000_support.patch
@@ -0,0 +1,203 @@
+--- a/arch/arm/mach-ixp4xx/Kconfig
++++ b/arch/arm/mach-ixp4xx/Kconfig
+@@ -101,6 +101,14 @@ config MACH_WRT300NV2
+ 	  WRT300N v2 router. For more information on this
+ 	  platform, see http://openwrt.org
+ 
++config MACH_AP1000
++	bool "Lanready AP-1000"
++	select PCI
++	help
++	  Say 'Y' here if you want your kernel to support Lanready's
++	  AP1000 board. For more information on this
++	  platform, see http://openwrt.org
++
+ config ARCH_IXDP425
+ 	bool "IXDP425"
+ 	help
+--- a/arch/arm/mach-ixp4xx/Makefile
++++ b/arch/arm/mach-ixp4xx/Makefile
+@@ -23,6 +23,7 @@ obj-pci-$(CONFIG_MACH_PRONGHORN)	+= pron
+ obj-pci-$(CONFIG_MACH_SIDEWINDER)	+= sidewinder-pci.o
+ obj-pci-$(CONFIG_MACH_COMPEXWP18)	+= ixdp425-pci.o
+ obj-pci-$(CONFIG_MACH_WRT300NV2)		+= wrt300nv2-pci.o
++obj-pci-$(CONFIG_MACH_AP1000)		+= ixdp425-pci.o
+ 
+ obj-y	+= common.o
+ 
+@@ -47,6 +48,7 @@ obj-$(CONFIG_MACH_PRONGHORN)	+= pronghor
+ obj-$(CONFIG_MACH_SIDEWINDER)	+= sidewinder-setup.o
+ obj-$(CONFIG_MACH_COMPEXWP18)	+= compex42x-setup.o
+ obj-$(CONFIG_MACH_WRT300NV2)	+= wrt300nv2-setup.o
++obj-$(CONFIG_MACH_AP1000)	+= ap1000-setup.o
+ 
+ obj-$(CONFIG_PCI)		+= $(obj-pci-$(CONFIG_PCI)) common-pci.o
+ obj-$(CONFIG_IXP4XX_QMGR)	+= ixp4xx_qmgr.o
+--- /dev/null
++++ b/arch/arm/mach-ixp4xx/ap1000-setup.c
+@@ -0,0 +1,154 @@
++/*
++ * arch/arm/mach-ixp4xx/ap1000-setup.c
++ *
++ * Lanready AP-1000
++ *
++ * Copyright (C) 2007 Imre Kaloz <Kaloz@openwrt.org>
++ *
++ * based on ixdp425-setup.c:
++ *	Copyright (C) 2003-2005 MontaVista Software, Inc.
++ *
++ * Author: Imre Kaloz <Kaloz@openwrt.org>
++ */
++
++#include <linux/kernel.h>
++#include <linux/init.h>
++#include <linux/device.h>
++#include <linux/serial.h>
++#include <linux/tty.h>
++#include <linux/serial_8250.h>
++#include <linux/slab.h>
++#include <linux/dma-mapping.h>
++
++#include <asm/types.h>
++#include <asm/setup.h>
++#include <asm/memory.h>
++#include <mach/hardware.h>
++#include <asm/mach-types.h>
++#include <asm/irq.h>
++#include <asm/mach/arch.h>
++#include <asm/mach/flash.h>
++
++static struct flash_platform_data ap1000_flash_data = {
++	.map_name	= "cfi_probe",
++	.width		= 2,
++};
++
++static struct resource ap1000_flash_resource = {
++	.flags		= IORESOURCE_MEM,
++};
++
++static struct platform_device ap1000_flash = {
++	.name		= "IXP4XX-Flash",
++	.id		= 0,
++	.dev		= {
++		.platform_data = &ap1000_flash_data,
++	},
++	.num_resources	= 1,
++	.resource	= &ap1000_flash_resource,
++};
++
++static struct resource ap1000_uart_resources[] = {
++	{
++		.start		= IXP4XX_UART1_BASE_PHYS,
++		.end		= IXP4XX_UART1_BASE_PHYS + 0x0fff,
++		.flags		= IORESOURCE_MEM
++	},
++	{
++		.start		= IXP4XX_UART2_BASE_PHYS,
++		.end		= IXP4XX_UART2_BASE_PHYS + 0x0fff,
++		.flags		= IORESOURCE_MEM
++	}
++};
++
++static struct plat_serial8250_port ap1000_uart_data[] = {
++	{
++		.mapbase	= IXP4XX_UART1_BASE_PHYS,
++		.membase	= (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET,
++		.irq		= IRQ_IXP4XX_UART1,
++		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
++		.iotype		= UPIO_MEM,
++		.regshift	= 2,
++		.uartclk	= IXP4XX_UART_XTAL,
++	},
++	{
++		.mapbase	= IXP4XX_UART2_BASE_PHYS,
++		.membase	= (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
++		.irq		= IRQ_IXP4XX_UART2,
++		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
++		.iotype		= UPIO_MEM,
++		.regshift	= 2,
++		.uartclk	= IXP4XX_UART_XTAL,
++	},
++	{ },
++};
++
++static struct platform_device ap1000_uart = {
++	.name			= "serial8250",
++	.id			= PLAT8250_DEV_PLATFORM,
++	.dev.platform_data	= ap1000_uart_data,
++	.num_resources		= 2,
++	.resource		= ap1000_uart_resources
++};
++
++static struct platform_device *ap1000_devices[] __initdata = {
++	&ap1000_flash,
++	&ap1000_uart
++};
++
++static char ap1000_mem_fixup[] __initdata = "mem=64M ";
++
++static void __init ap1000_fixup(struct machine_desc *desc,
++		struct tag *tags, char **cmdline, struct meminfo *mi)
++
++{
++	struct tag *t = tags;
++	char *p = *cmdline;
++
++	/* Find the end of the tags table, taking note of any cmdline tag. */
++	for (; t->hdr.size; t = tag_next(t)) {
++		if (t->hdr.tag == ATAG_CMDLINE) {
++			p = t->u.cmdline.cmdline;
++		}
++	}
++
++	/* Overwrite the end of the table with a new cmdline tag. */
++	t->hdr.tag = ATAG_CMDLINE;
++	t->hdr.size = (sizeof (struct tag_header) +
++		strlen(ap1000_mem_fixup) + strlen(p) + 1 + 4) >> 2;
++	strlcpy(t->u.cmdline.cmdline, ap1000_mem_fixup, COMMAND_LINE_SIZE);
++	strlcpy(t->u.cmdline.cmdline + strlen(ap1000_mem_fixup), p,
++		COMMAND_LINE_SIZE - strlen(ap1000_mem_fixup));
++
++	/* Terminate the table. */
++	t = tag_next(t);
++	t->hdr.tag = ATAG_NONE;
++	t->hdr.size = 0;
++}
++
++static void __init ap1000_init(void)
++{
++	ixp4xx_sys_init();
++
++	ap1000_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
++	ap1000_flash_resource.end =
++		IXP4XX_EXP_BUS_BASE(0) + ixp4xx_exp_bus_size - 1;
++
++	platform_add_devices(ap1000_devices, ARRAY_SIZE(ap1000_devices));
++}
++
++#ifdef CONFIG_MACH_AP1000
++MACHINE_START(AP1000, "Lanready AP-1000")
++	/* Maintainer: Imre Kaloz <Kaloz@openwrt.org> */
++	.fixup		= ap1000_fixup,
++	.map_io		= ixp4xx_map_io,
++	.init_irq	= ixp4xx_init_irq,
++	.init_time	= ixp4xx_timer_init,
++	.atag_offset	= 0x0100,
++	.init_machine	= ap1000_init,
++#if defined(CONFIG_PCI)
++	.dma_zone_size	= SZ_64M,
++#endif
++	.restart	= ixp4xx_restart,
++MACHINE_END
++#endif
+--- a/arch/arm/mach-ixp4xx/ixdp425-pci.c
++++ b/arch/arm/mach-ixp4xx/ixdp425-pci.c
+@@ -70,7 +70,7 @@ int __init ixdp425_pci_init(void)
+ {
+ 	if (machine_is_ixdp425() || machine_is_ixcdp1100() ||
+ 			machine_is_ixdp465() || machine_is_kixrp435() ||
+-			machine_is_compex42x())
++			machine_is_compex42x() || machine_is_ap1000())
+ 		pci_common_init(&ixdp425_pci);
+ 	return 0;
+ }
diff --git a/target/linux/ixp4xx/patches-4.1/151-lanready_ap1000_mac_plat_info.patch b/target/linux/ixp4xx/patches-4.1/151-lanready_ap1000_mac_plat_info.patch
new file mode 100644
index 0000000..2079589
--- /dev/null
+++ b/target/linux/ixp4xx/patches-4.1/151-lanready_ap1000_mac_plat_info.patch
@@ -0,0 +1,51 @@
+--- a/arch/arm/mach-ixp4xx/ap1000-setup.c
++++ b/arch/arm/mach-ixp4xx/ap1000-setup.c
+@@ -91,15 +91,45 @@ static struct platform_device ap1000_uar
+ 	.resource		= ap1000_uart_resources
+ };
+ 
++/* Built-in 10/100 Ethernet MAC interfaces */
++static struct eth_plat_info ap1000_plat_eth[] = {
++	{
++		.phy		= IXP4XX_ETH_PHY_MAX_ADDR,
++		.phy_mask	= 0x1e,
++		.rxq		= 3,
++		.txreadyq	= 20,
++	}, {
++		.phy		= 5,
++		.rxq		= 4,
++		.txreadyq	= 21,
++	}
++};
++
++static struct platform_device ap1000_eth[] = {
++	{
++		.name			= "ixp4xx_eth",
++		.id			= IXP4XX_ETH_NPEB,
++		.dev.platform_data	= ap1000_plat_eth,
++		.dev.coherent_dma_mask	= DMA_BIT_MASK(32),
++	}, {
++		.name			= "ixp4xx_eth",
++		.id			= IXP4XX_ETH_NPEC,
++		.dev.platform_data	= ap1000_plat_eth + 1,
++		.dev.coherent_dma_mask	= DMA_BIT_MASK(32),
++	}
++};
++
+ static struct platform_device *ap1000_devices[] __initdata = {
+ 	&ap1000_flash,
+-	&ap1000_uart
++	&ap1000_uart,
++	&ap1000_eth[0],
++	&ap1000_eth[1],
+ };
+ 
+ static char ap1000_mem_fixup[] __initdata = "mem=64M ";
+ 
+-static void __init ap1000_fixup(struct machine_desc *desc,
+-		struct tag *tags, char **cmdline, struct meminfo *mi)
++static void __init ap1000_fixup(struct tag *tags, char **cmdline,
++				struct meminfo *mi)
+ 
+ {
+ 	struct tag *t = tags;
diff --git a/target/linux/ixp4xx/patches-4.1/160-delayed_uart_io.patch b/target/linux/ixp4xx/patches-4.1/160-delayed_uart_io.patch
new file mode 100644
index 0000000..e44740d
--- /dev/null
+++ b/target/linux/ixp4xx/patches-4.1/160-delayed_uart_io.patch
@@ -0,0 +1,131 @@
+--- a/drivers/tty/serial/8250/8250_core.c
++++ b/drivers/tty/serial/8250/8250_core.c
+@@ -438,6 +438,20 @@ static void mem_serial_out(struct uart_p
+ 	writeb(value, p->membase + offset);
+ }
+ 
++static unsigned int memdelay_serial_in(struct uart_port *p, int offset)
++{
++	struct uart_8250_port *up = (struct uart_8250_port *)p;
++	udelay(up->port.rw_delay);
++	return mem_serial_in(p, offset);
++}
++
++static void memdelay_serial_out(struct uart_port *p, int offset, int value)
++{
++	struct uart_8250_port *up = (struct uart_8250_port *)p;
++	udelay(up->port.rw_delay);
++	mem_serial_out(p, offset, value);
++}
++
+ static void mem32_serial_out(struct uart_port *p, int offset, int value)
+ {
+ 	offset = offset << p->regshift;
+@@ -505,6 +519,11 @@ static void set_io_from_upio(struct uart
+ 		p->serial_out = mem32be_serial_out;
+ 		break;
+ 
++	case UPIO_MEM_DELAY:
++		p->serial_in = memdelay_serial_in;
++		p->serial_out = memdelay_serial_out;
++		break;
++
+ #if defined(CONFIG_MIPS_ALCHEMY) || defined(CONFIG_SERIAL_8250_RT288X)
+ 	case UPIO_AU:
+ 		p->serial_in = au_serial_in;
+@@ -531,6 +550,7 @@ serial_port_out_sync(struct uart_port *p
+ 	case UPIO_MEM:
+ 	case UPIO_MEM32:
+ 	case UPIO_MEM32BE:
++	case UPIO_MEM_DELAY:
+ 	case UPIO_AU:
+ 		p->serial_out(p, offset, value);
+ 		p->serial_in(p, UART_LCR);	/* safe, no side-effects */
+@@ -2768,6 +2788,7 @@ static int serial8250_request_std_resour
+ 	case UPIO_MEM32:
+ 	case UPIO_MEM32BE:
+ 	case UPIO_MEM:
++	case UPIO_MEM_DELAY:
+ 		if (!port->mapbase)
+ 			break;
+ 
+@@ -2805,6 +2826,7 @@ static void serial8250_release_std_resou
+ 	case UPIO_MEM32:
+ 	case UPIO_MEM32BE:
+ 	case UPIO_MEM:
++	case UPIO_MEM_DELAY:
+ 		if (!port->mapbase)
+ 			break;
+ 
+@@ -3693,6 +3715,7 @@ static int serial8250_probe(struct platf
+ 		uart.port.set_termios	= p->set_termios;
+ 		uart.port.pm		= p->pm;
+ 		uart.port.dev		= &dev->dev;
++		uart.port.rw_delay	= p->rw_delay;
+ 		uart.port.irqflags	|= irqflag;
+ 		ret = serial8250_register_8250_port(&uart);
+ 		if (ret < 0) {
+@@ -3849,6 +3872,7 @@ int serial8250_register_8250_port(struct
+ 		uart->bugs		= up->bugs;
+ 		uart->port.mapbase      = up->port.mapbase;
+ 		uart->port.mapsize      = up->port.mapsize;
++		uart->port.rw_delay	= up->port.rw_delay;
+ 		uart->port.private_data = up->port.private_data;
+ 		uart->port.fifosize	= up->port.fifosize;
+ 		uart->tx_loadsz		= up->tx_loadsz;
+--- a/drivers/tty/serial/serial_core.c
++++ b/drivers/tty/serial/serial_core.c
+@@ -2177,6 +2177,7 @@ uart_report_port(struct uart_driver *drv
+ 		snprintf(address, sizeof(address),
+ 			 "I/O 0x%lx offset 0x%x", port->iobase, port->hub6);
+ 		break;
++	case UPIO_MEM_DELAY:
+ 	case UPIO_MEM:
+ 	case UPIO_MEM32:
+ 	case UPIO_MEM32BE:
+@@ -2824,6 +2825,7 @@ int uart_match_port(struct uart_port *po
+ 	case UPIO_HUB6:
+ 		return (port1->iobase == port2->iobase) &&
+ 		       (port1->hub6   == port2->hub6);
++	case UPIO_MEM_DELAY:
+ 	case UPIO_MEM:
+ 	case UPIO_MEM32:
+ 	case UPIO_MEM32BE:
+--- a/include/linux/serial_8250.h
++++ b/include/linux/serial_8250.h
+@@ -27,6 +27,7 @@ struct plat_serial8250_port {
+ 	void            *private_data;
+ 	unsigned char	regshift;	/* register shift */
+ 	unsigned char	iotype;		/* UPIO_* */
++	unsigned int rw_delay;	/* udelay for slower busses IXP4XX Expansion Bus */
+ 	unsigned char	hub6;
+ 	upf_t		flags;		/* UPF_* flags */
+ 	unsigned int	type;		/* If UPF_FIXED_TYPE */
+--- a/include/linux/serial_core.h
++++ b/include/linux/serial_core.h
+@@ -150,6 +150,7 @@ struct uart_port {
+ #define UPIO_AU			(SERIAL_IO_AU)		/* Au1x00 and RT288x type IO */
+ #define UPIO_TSI		(SERIAL_IO_TSI)		/* Tsi108/109 type IO */
+ #define UPIO_MEM32BE		(SERIAL_IO_MEM32BE)	/* 32b big endian */
++#define UPIO_MEM_DELAY		(SERIAL_IO_MEM_DELAY)
+ 
+ 	unsigned int		read_status_mask;	/* driver specific */
+ 	unsigned int		ignore_status_mask;	/* driver specific */
+@@ -231,6 +232,7 @@ struct uart_port {
+ 	int			hw_stopped;		/* sw-assisted CTS flow state */
+ 	unsigned int		mctrl;			/* current modem ctrl settings */
+ 	unsigned int		timeout;		/* character-based timeout */
++	unsigned int		rw_delay;		/* udelay for slow busses, IXP4XX Expansion Bus */
+ 	unsigned int		type;			/* port type */
+ 	const struct uart_ops	*ops;
+ 	unsigned int		custom_divisor;
+--- a/include/uapi/linux/serial.h
++++ b/include/uapi/linux/serial.h
+@@ -69,6 +69,7 @@ struct serial_struct {
+ #define SERIAL_IO_AU	  4
+ #define SERIAL_IO_TSI	  5
+ #define SERIAL_IO_MEM32BE 6
++#define SERIAL_IO_MEM_DELAY 7
+ 
+ #define UART_CLEAR_FIFO		0x01
+ #define UART_USE_FIFO		0x02
diff --git a/target/linux/ixp4xx/patches-4.1/162-wg302v1_mem_fixup.patch b/target/linux/ixp4xx/patches-4.1/162-wg302v1_mem_fixup.patch
new file mode 100644
index 0000000..75212bc
--- /dev/null
+++ b/target/linux/ixp4xx/patches-4.1/162-wg302v1_mem_fixup.patch
@@ -0,0 +1,38 @@
+--- a/arch/arm/mach-ixp4xx/wg302v1-setup.c
++++ b/arch/arm/mach-ixp4xx/wg302v1-setup.c
+@@ -117,6 +117,35 @@ static struct platform_device *wg302v1_d
+ 	&wg302v1_eth[0],
+ };
+ 
++static char wg302v1_mem_fixup[] __initdata = " mem=32M";
++
++static void __init wg302v1_fixup(struct tag *tags, char **cmdline,
++				 struct meminfo *mi)
++{
++	struct tag *t = tags;
++	char *p = *cmdline;
++	size_t fixlen, cmdlen;
++
++	/* Find the end of the tags table, taking note of any cmdline tag. */
++	for (; t->hdr.size; t = tag_next(t)) {
++		if (t->hdr.tag == ATAG_CMDLINE) {
++			p = t->u.cmdline.cmdline;
++		}
++	}
++
++	fixlen = strlen(wg302v1_mem_fixup);
++	cmdlen = strlen(p);
++	if (fixlen + cmdlen >= COMMAND_LINE_SIZE)
++		return;
++
++	/* append the fixup to the cmdline */
++	memmove(p + cmdlen, wg302v1_mem_fixup, fixlen + 1);
++
++	/* Adjust the size of the atag if there was one */
++	if (t->hdr.size)
++		t->hdr.size += fixlen;
++}
++
+ static void __init wg302v1_init(void)
+ {
+ 	ixp4xx_sys_init();
diff --git a/target/linux/ixp4xx/patches-4.1/170-ixdpg425_mac_plat_info.patch b/target/linux/ixp4xx/patches-4.1/170-ixdpg425_mac_plat_info.patch
new file mode 100644
index 0000000..f7090cd
--- /dev/null
+++ b/target/linux/ixp4xx/patches-4.1/170-ixdpg425_mac_plat_info.patch
@@ -0,0 +1,51 @@
+--- a/arch/arm/mach-ixp4xx/coyote-setup.c
++++ b/arch/arm/mach-ixp4xx/coyote-setup.c
+@@ -14,6 +14,7 @@
+ #include <linux/serial.h>
+ #include <linux/tty.h>
+ #include <linux/serial_8250.h>
++#include <linux/dma-mapping.h>
+ 
+ #include <asm/types.h>
+ #include <asm/setup.h>
+@@ -81,9 +82,39 @@ static struct platform_device coyote_uar
+ 	.resource	= &coyote_uart_resource,
+ };
+ 
++/* Built-in 10/100 Ethernet MAC interfaces */
++static struct eth_plat_info ixdpg425_plat_eth[] = {
++        {
++                .phy            = 5,
++                .rxq            = 3,
++                .txreadyq       = 20,
++        }, {
++                .phy            = 4,
++                .rxq            = 4,
++                .txreadyq       = 21,
++        }
++};
++
++static struct platform_device ixdpg425_eth[] = {
++	{
++		.name			= "ixp4xx_eth",
++		.id			= IXP4XX_ETH_NPEB,
++		.dev.platform_data	= ixdpg425_plat_eth,
++		.dev.coherent_dma_mask	= DMA_BIT_MASK(32),
++	}, {
++		.name			= "ixp4xx_eth",
++		.id			= IXP4XX_ETH_NPEC,
++		.dev.platform_data	= ixdpg425_plat_eth + 1,
++		.dev.coherent_dma_mask	= DMA_BIT_MASK(32),
++	}
++};
++
++
+ static struct platform_device *coyote_devices[] __initdata = {
+ 	&coyote_flash,
+-	&coyote_uart
++	&coyote_uart,
++	&ixdpg425_eth[0],
++	&ixdpg425_eth[1],
+ };
+ 
+ static void __init coyote_init(void)
diff --git a/target/linux/ixp4xx/patches-4.1/175-avila_hss_audio_support.patch b/target/linux/ixp4xx/patches-4.1/175-avila_hss_audio_support.patch
new file mode 100644
index 0000000..4bffe42
--- /dev/null
+++ b/target/linux/ixp4xx/patches-4.1/175-avila_hss_audio_support.patch
@@ -0,0 +1,2090 @@
+--- a/sound/soc/Kconfig
++++ b/sound/soc/Kconfig
+@@ -57,6 +57,7 @@ source "sound/soc/tegra/Kconfig"
+ source "sound/soc/txx9/Kconfig"
+ source "sound/soc/ux500/Kconfig"
+ source "sound/soc/xtensa/Kconfig"
++source "sound/soc/gw-avila/Kconfig"
+ 
+ # Supported codecs
+ source "sound/soc/codecs/Kconfig"
+--- a/sound/soc/Makefile
++++ b/sound/soc/Makefile
+@@ -38,3 +38,4 @@ obj-$(CONFIG_SND_SOC)	+= tegra/
+ obj-$(CONFIG_SND_SOC)	+= txx9/
+ obj-$(CONFIG_SND_SOC)	+= ux500/
+ obj-$(CONFIG_SND_SOC)	+= xtensa/
++obj-$(CONFIG_SND_SOC)	+= gw-avila/
+--- /dev/null
++++ b/sound/soc/gw-avila/Kconfig
+@@ -0,0 +1,17 @@
++config SND_GW_AVILA_SOC_PCM
++	tristate
++
++config SND_GW_AVILA_SOC_HSS
++	tristate
++
++config SND_GW_AVILA_SOC
++	tristate "SoC Audio for the Gateworks AVILA Family"
++	depends on ARCH_IXP4XX && SND_SOC
++	select SND_GW_AVILA_SOC_PCM
++	select SND_GW_AVILA_SOC_HSS
++	select SND_SOC_TLV320AIC3X
++	help
++	  Say Y or M if you want to add support for codecs attached to
++	  the Gateworks HSS interface. You will also need
++	  to select the audio interfaces to support below.
++
+--- /dev/null
++++ b/sound/soc/gw-avila/Makefile
+@@ -0,0 +1,8 @@
++# Gateworks Avila HSS Platform Support
++snd-soc-gw-avila-objs := gw-avila.o ixp4xx_hss.o
++snd-soc-gw-avila-pcm-objs := gw-avila-pcm.o
++snd-soc-gw-avila-hss-objs := gw-avila-hss.o
++
++obj-$(CONFIG_SND_GW_AVILA_SOC) += snd-soc-gw-avila.o
++obj-$(CONFIG_SND_GW_AVILA_SOC_PCM) += snd-soc-gw-avila-pcm.o
++obj-$(CONFIG_SND_GW_AVILA_SOC_HSS) += snd-soc-gw-avila-hss.o
+--- /dev/null
++++ b/sound/soc/gw-avila/gw-avila-hss.c
+@@ -0,0 +1,103 @@
++/*
++ * gw-avila-hss.c -- HSS Audio Support for Gateworks Avila
++ *
++ * Author:	Chris Lang	<clang@gateworks.com>
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++
++#include <linux/init.h>
++#include <linux/module.h>
++#include <linux/platform_device.h>
++#include <linux/interrupt.h>
++#include <linux/wait.h>
++#include <linux/delay.h>
++
++#include <sound/core.h>
++#include <sound/pcm.h>
++#include <sound/ac97_codec.h>
++#include <sound/initval.h>
++#include <sound/soc.h>
++
++#include <asm/irq.h>
++#include <linux/mutex.h>
++#include <linux/gpio.h>
++
++#include "ixp4xx_hss.h"
++#include "gw-avila-hss.h"
++
++#define gw_avila_hss_suspend	NULL
++#define gw_avila_hss_resume	NULL
++
++struct snd_soc_dai_driver gw_avila_hss_dai = {
++	.playback = {
++		.channels_min = 2,
++		.channels_max = 2,
++		.rates = (SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_16000 |
++			SNDRV_PCM_RATE_22050 | SNDRV_PCM_RATE_32000 |
++			SNDRV_PCM_RATE_44100 | SNDRV_PCM_RATE_48000 |
++			SNDRV_PCM_RATE_88200 | SNDRV_PCM_RATE_96000 |
++			SNDRV_PCM_RATE_KNOT),
++		.formats = SNDRV_PCM_FMTBIT_S16_LE, },
++	.capture = {
++		.channels_min = 2,
++		.channels_max = 2,
++		.rates = (SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_16000 |
++			SNDRV_PCM_RATE_22050 | SNDRV_PCM_RATE_32000 |
++			SNDRV_PCM_RATE_44100 | SNDRV_PCM_RATE_48000 |
++			SNDRV_PCM_RATE_88200 | SNDRV_PCM_RATE_96000 |
++			SNDRV_PCM_RATE_KNOT),
++		.formats = SNDRV_PCM_FMTBIT_S16_LE, },
++};
++
++static const struct snd_soc_component_driver gw_avila_hss_component = {
++	.name   = "gw_avila_hss",
++};
++
++static int gw_avila_hss_probe(struct platform_device *pdev)
++{
++	int port = (pdev->id < 2) ? 0 : 1;
++	int channel = (pdev->id % 2);
++
++	hss_handle[pdev->id] = hss_init(port, channel);
++	if (!hss_handle[pdev->id]) {
++		return -ENODEV;
++	}
++
++	return snd_soc_register_component(&pdev->dev, &gw_avila_hss_component,
++					  &gw_avila_hss_dai, 1);
++}
++
++static int gw_avila_hss_remove(struct platform_device *pdev)
++{
++	snd_soc_unregister_component(&pdev->dev);
++
++	return 0;
++}
++
++static struct platform_driver gw_avila_hss_driver = {
++	.probe    = gw_avila_hss_probe,
++	.remove   = gw_avila_hss_remove,
++	.driver   = {
++		.name = "gw_avila_hss",
++		.owner  = THIS_MODULE,
++	}
++};
++
++static int __init gw_avila_hss_init(void)
++{
++	return platform_driver_register(&gw_avila_hss_driver);
++}
++module_init(gw_avila_hss_init);
++
++static void __exit gw_avila_hss_exit(void)
++{
++	platform_driver_unregister(&gw_avila_hss_driver);
++}
++module_exit(gw_avila_hss_exit);
++
++MODULE_AUTHOR("Chris Lang");
++MODULE_DESCRIPTION("HSS Audio Driver for Gateworks Avila");
++MODULE_LICENSE("GPL");
+--- /dev/null
++++ b/sound/soc/gw-avila/gw-avila-hss.h
+@@ -0,0 +1,12 @@
++/*
++ * Author: Chris Lang <clang@gateworks.com>
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++
++#ifndef _GW_AVILA_HSS_H
++#define _GW_AVILA_HSS_H
++
++#endif
+--- /dev/null
++++ b/sound/soc/gw-avila/gw-avila-pcm.c
+@@ -0,0 +1,327 @@
++/*
++ * ALSA PCM interface for the TI DAVINCI processor
++ *
++ * Author:      Chris Lang, <clang@gateworks.com>
++ * Copyright:   (C) 2009 Gateworks Corporation
++ *
++ * Based On:    davinci-evm.c, Author: Vladimir Barinov, <vbarinov@ru.mvista.com>
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++
++#include <linux/module.h>
++#include <linux/init.h>
++#include <linux/platform_device.h>
++#include <linux/slab.h>
++#include <linux/dma-mapping.h>
++
++#include <sound/core.h>
++#include <sound/pcm.h>
++#include <sound/pcm_params.h>
++#include <sound/soc.h>
++
++#include <asm/dma.h>
++
++#include "gw-avila-pcm.h"
++#include "gw-avila-hss.h"
++#include "ixp4xx_hss.h"
++
++#define GW_AVILA_PCM_DEBUG 0
++#if GW_AVILA_PCM_DEBUG
++#define DPRINTK(x...) printk(KERN_DEBUG x)
++#else
++#define DPRINTK(x...)
++#endif
++
++static struct snd_pcm_hardware gw_avila_pcm_hardware = {
++	.info = (SNDRV_PCM_INFO_INTERLEAVED | SNDRV_PCM_INFO_BLOCK_TRANSFER |
++		 SNDRV_PCM_INFO_MMAP | SNDRV_PCM_INFO_MMAP_VALID),
++/*		 SNDRV_PCM_INFO_PAUSE),*/
++	.formats = (SNDRV_PCM_FMTBIT_S16_LE),
++	.rates = (SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_16000 |
++		  SNDRV_PCM_RATE_22050 | SNDRV_PCM_RATE_32000 |
++		  SNDRV_PCM_RATE_44100 | SNDRV_PCM_RATE_48000 |
++		  SNDRV_PCM_RATE_88200 | SNDRV_PCM_RATE_96000 |
++		  SNDRV_PCM_RATE_KNOT),
++	.rate_min = 8000,
++	.rate_max = 8000,
++	.channels_min = 2,
++	.channels_max = 2,
++	.buffer_bytes_max = 64 * 1024, // All of the lines below may need to be changed
++	.period_bytes_min = 128,
++	.period_bytes_max = 4 * 1024,
++	.periods_min = 16,
++	.periods_max = 32,
++	.fifo_size = 0,
++};
++
++struct gw_avila_runtime_data {
++	spinlock_t lock;
++	int period;		/* current DMA period */
++	int master_lch;		/* Master DMA channel */
++	int slave_lch;		/* Slave DMA channel */
++	struct gw_avila_pcm_dma_params *params;	/* DMA params */
++};
++
++static void gw_avila_dma_irq(void *data)
++{
++	struct snd_pcm_substream *substream = data;
++	snd_pcm_period_elapsed(substream);
++}
++
++static int gw_avila_pcm_trigger(struct snd_pcm_substream *substream, int cmd)
++{
++	struct snd_pcm_runtime *runtime = substream->runtime;
++	struct hss_device *hdev = runtime->private_data;
++	int ret = 0;
++
++	switch (cmd) {
++	case SNDRV_PCM_TRIGGER_START:
++	case SNDRV_PCM_TRIGGER_RESUME:
++	case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
++		if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
++			hss_tx_start(hdev);
++		else
++			hss_rx_start(hdev);
++		break;
++	case SNDRV_PCM_TRIGGER_STOP:
++	case SNDRV_PCM_TRIGGER_SUSPEND:
++	case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
++		if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
++			hss_tx_stop(hdev);
++		else
++			hss_rx_stop(hdev);
++		break;
++	default:
++		ret = -EINVAL;
++		break;
++	}
++	return ret;
++}
++
++static int gw_avila_pcm_prepare(struct snd_pcm_substream *substream)
++{
++	struct snd_pcm_runtime *runtime = substream->runtime;
++	struct hss_device *hdev = runtime->private_data;
++
++	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
++		hss_set_tx_callback(hdev, gw_avila_dma_irq, substream);
++		hss_config_tx_dma(hdev, runtime->dma_area, runtime->buffer_size, runtime->period_size);
++	} else {
++		hss_set_rx_callback(hdev, gw_avila_dma_irq, substream);
++		hss_config_rx_dma(hdev, runtime->dma_area, runtime->buffer_size, runtime->period_size);
++	}
++
++	return 0;
++}
++
++static snd_pcm_uframes_t
++gw_avila_pcm_pointer(struct snd_pcm_substream *substream)
++{
++	struct snd_pcm_runtime *runtime = substream->runtime;
++	struct hss_device *hdev = runtime->private_data;
++
++	unsigned int curr = 0;
++	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
++		curr = hss_curr_offset_tx(hdev);
++	else
++		curr = hss_curr_offset_rx(hdev);
++  return curr;
++}
++
++static int gw_avila_pcm_open(struct snd_pcm_substream *substream)
++{
++	struct snd_pcm_runtime *runtime = substream->runtime;
++	struct snd_soc_pcm_runtime *rtd = substream->private_data;
++	struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
++
++	snd_soc_set_runtime_hwparams(substream, &gw_avila_pcm_hardware);
++
++	if (hss_handle[cpu_dai->id] != NULL)
++		runtime->private_data = hss_handle[cpu_dai->id];
++	else {
++		pr_err("hss_handle is NULL\n");
++		return -1;
++	}
++
++	hss_chan_open(hss_handle[cpu_dai->id]);
++
++	return 0;
++}
++
++static int gw_avila_pcm_close(struct snd_pcm_substream *substream)
++{
++	struct snd_pcm_runtime *runtime = substream->runtime;
++	struct hss_device *hdev = runtime->private_data;
++
++	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
++		memset(hdev->tx_buf, 0, runtime->buffer_size);
++	} else
++		memset(hdev->rx_buf, 0, runtime->buffer_size);
++
++	hss_chan_close(hdev);
++
++	return 0;
++}
++
++static int gw_avila_pcm_hw_params(struct snd_pcm_substream *substream,
++				 struct snd_pcm_hw_params *hw_params)
++{
++	return snd_pcm_lib_malloc_pages(substream,
++					params_buffer_bytes(hw_params));
++}
++
++static int gw_avila_pcm_hw_free(struct snd_pcm_substream *substream)
++{
++	struct snd_pcm_runtime *runtime = substream->runtime;
++
++	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
++	  memset(runtime->dma_area, 0, runtime->buffer_size);
++
++	return snd_pcm_lib_free_pages(substream);
++}
++
++static int gw_avila_pcm_mmap(struct snd_pcm_substream *substream,
++          struct vm_area_struct *vma)
++{
++	struct snd_pcm_runtime *runtime = substream->runtime;
++
++	return dma_mmap_writecombine(substream->pcm->card->dev, vma,
++						runtime->dma_area,
++						runtime->dma_addr,
++						runtime->dma_bytes);
++}
++
++struct snd_pcm_ops gw_avila_pcm_ops = {
++	.open = 	gw_avila_pcm_open,
++	.close = 	gw_avila_pcm_close,
++	.ioctl = 	snd_pcm_lib_ioctl,
++	.hw_params = 	gw_avila_pcm_hw_params,
++	.hw_free = 	gw_avila_pcm_hw_free,
++	.prepare = 	gw_avila_pcm_prepare,
++	.trigger = 	gw_avila_pcm_trigger,
++	.pointer = 	gw_avila_pcm_pointer,
++	.mmap = gw_avila_pcm_mmap,
++};
++
++static int gw_avila_pcm_preallocate_dma_buffer(struct snd_pcm *pcm, int stream)
++{
++	struct snd_pcm_substream *substream = pcm->streams[stream].substream;
++	struct snd_dma_buffer *buf = &substream->dma_buffer;
++	size_t size = gw_avila_pcm_hardware.buffer_bytes_max;
++
++	buf->dev.type = SNDRV_DMA_TYPE_DEV;
++	buf->dev.dev = pcm->card->dev;
++	buf->private_data = NULL;
++
++	buf->area = dma_alloc_coherent(pcm->card->dev, size,
++					   &buf->addr, GFP_KERNEL);
++
++	if (!buf->area) {
++		return -ENOMEM;
++	}
++
++	memset(buf->area, 0xff, size);
++
++	DPRINTK("preallocate_dma_buffer: area=%p, addr=%p, size=%d\n",
++		(void *) buf->area, (void *) buf->addr, size);
++
++	buf->bytes = size;
++
++	return 0;
++}
++
++static void gw_avila_pcm_free(struct snd_pcm *pcm)
++{
++	struct snd_pcm_substream *substream;
++	struct snd_dma_buffer *buf;
++	int stream;
++
++	for (stream = 0; stream < 2; stream++) {
++		substream = pcm->streams[stream].substream;
++		if (!substream)
++			continue;
++
++		buf = &substream->dma_buffer;
++		if (!buf->area)
++			continue;
++
++		dma_free_coherent(NULL, buf->bytes, buf->area, 0);
++		buf->area = NULL;
++	}
++}
++
++static u64 gw_avila_pcm_dmamask = 0xFFFFFFFF;
++
++static int gw_avila_pcm_new(struct snd_soc_pcm_runtime *rtd)
++{
++        struct snd_card *card = rtd->card->snd_card;
++        struct snd_pcm *pcm = rtd->pcm;
++        struct snd_soc_dai *dai = rtd->codec_dai;
++	int ret;
++
++	if (!card->dev->dma_mask)
++		card->dev->dma_mask = &gw_avila_pcm_dmamask;
++	if (!card->dev->coherent_dma_mask)
++		card->dev->coherent_dma_mask = 0xFFFFFFFF;
++
++	if (dai->driver->playback.channels_min) {
++		ret = gw_avila_pcm_preallocate_dma_buffer(pcm,
++			SNDRV_PCM_STREAM_PLAYBACK);
++		if (ret)
++			return ret;
++	}
++
++	if (dai->driver->capture.channels_min) {
++		ret = gw_avila_pcm_preallocate_dma_buffer(pcm,
++			SNDRV_PCM_STREAM_CAPTURE);
++		if (ret)
++			return ret;
++	}
++
++	return 0;
++}
++
++struct snd_soc_platform_driver gw_avila_soc_platform = {
++	.ops = 	&gw_avila_pcm_ops,
++	.pcm_new = 	gw_avila_pcm_new,
++	.pcm_free = 	gw_avila_pcm_free,
++};
++
++static int gw_avila_pcm_platform_probe(struct platform_device *pdev)
++{
++	return snd_soc_register_platform(&pdev->dev, &gw_avila_soc_platform);
++}
++
++static int gw_avila_pcm_platform_remove(struct platform_device *pdev)
++{
++	snd_soc_unregister_platform(&pdev->dev);
++	return 0;
++}
++
++static struct platform_driver gw_avila_pcm_driver = {
++	.driver = {
++		.name = "gw_avila-audio",
++		.owner = THIS_MODULE,
++	},
++	.probe = gw_avila_pcm_platform_probe,
++	.remove = gw_avila_pcm_platform_remove,
++};
++
++static int __init gw_avila_soc_platform_init(void)
++{
++	return platform_driver_register(&gw_avila_pcm_driver);
++}
++module_init(gw_avila_soc_platform_init);
++
++static void __exit gw_avila_soc_platform_exit(void)
++{
++	platform_driver_unregister(&gw_avila_pcm_driver);
++}
++module_exit(gw_avila_soc_platform_exit);
++
++MODULE_AUTHOR("Chris Lang");
++MODULE_DESCRIPTION("Gateworks Avila PCM DMA module");
++MODULE_LICENSE("GPL");
+--- /dev/null
++++ b/sound/soc/gw-avila/gw-avila-pcm.h
+@@ -0,0 +1,32 @@
++/*
++ * ALSA PCM interface for the Gateworks Avila platform
++ *
++ * Author:      Chris Lang, <clang@gateworks.com>
++ * Copyright:   (C) 2009 Gateworks Corporation
++ *
++ * Based On:    davinci-evm.c, Author: Vladimir Barinov, <vbarinov@ru.mvista.com>
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++
++#ifndef _GW_AVILA_PCM_H
++#define _GW_AVILA_PCM_H
++
++#if 0
++struct gw_avila_pcm_dma_params {
++	char *name;		/* stream identifier */
++	int channel;		/* sync dma channel ID */
++	dma_addr_t dma_addr;	/* device physical address for DMA */
++	unsigned int data_type;	/* xfer data type */
++};
++
++struct gw_avila_snd_platform_data {
++	int tx_dma_ch; // XXX Do we need this?
++	int rx_dma_ch; // XXX Do we need this
++};
++extern struct snd_soc_platform gw_avila_soc_platform[];
++#endif
++
++#endif
+--- /dev/null
++++ b/sound/soc/gw-avila/gw-avila.c
+@@ -0,0 +1,244 @@
++/*
++ * File:         sound/soc/gw-avila/gw_avila.c
++ * Author:       Chris Lang <clang@gateworks.com>
++ *
++ * Created:      Tue June 06 2008
++ * Description:  Board driver for Gateworks Avila
++ *
++ * Modified:
++ *               Copyright 2009 Gateworks Corporation
++ *
++ * Bugs:         What Bugs?
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, see the file COPYING, or write
++ * to the Free Software Foundation, Inc.,
++ * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
++ */
++
++#include <linux/module.h>
++#include <linux/moduleparam.h>
++#include <linux/device.h>
++#include <asm/dma.h>
++#include <linux/platform_device.h>
++#include <sound/core.h>
++#include <sound/pcm.h>
++#include <sound/soc.h>
++#include <linux/slab.h>
++#include <linux/gpio.h>
++
++#include "ixp4xx_hss.h"
++#include "gw-avila-hss.h"
++#include "gw-avila-pcm.h"
++
++#define CODEC_FREQ 33333000
++
++static int gw_avila_board_startup(struct snd_pcm_substream *substream)
++{
++	pr_debug("%s enter\n", __func__);
++	return 0;
++}
++
++static int gw_avila_hw_params(struct snd_pcm_substream *substream,
++		struct snd_pcm_hw_params *params)
++{
++	struct snd_soc_pcm_runtime *rtd = substream->private_data;
++	struct snd_soc_dai *codec_dai = rtd->codec_dai;
++	struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
++
++	int ret = 0;
++
++	/* set codec DAI configuration */
++	if (cpu_dai->id % 2) {
++  		ret = snd_soc_dai_set_fmt(codec_dai, SND_SOC_DAIFMT_DSP_B | SND_SOC_DAIFMT_IB_NF | SND_SOC_DAIFMT_CBS_CFS);
++			snd_soc_dai_set_tdm_slot(codec_dai, 0, 0, 1, 32);
++	} else {
++	  	ret = snd_soc_dai_set_fmt(codec_dai, SND_SOC_DAIFMT_DSP_B | SND_SOC_DAIFMT_IB_NF | SND_SOC_DAIFMT_CBM_CFM);
++			snd_soc_dai_set_tdm_slot(codec_dai, 0, 0, 0, 32);
++	}
++
++	if (ret < 0)
++	    return ret;
++
++	/* set the codec system clock */
++	ret = snd_soc_dai_set_sysclk(codec_dai, 0, CODEC_FREQ, SND_SOC_CLOCK_OUT);
++	if (ret < 0)
++	    return ret;
++
++	return 0;
++}
++
++static const struct snd_soc_dapm_widget aic3x_dapm_widgets[] = {
++  SND_SOC_DAPM_HP("Headphone Jack", NULL),
++  SND_SOC_DAPM_LINE("Line Out", NULL),
++  SND_SOC_DAPM_LINE("Line In", NULL),
++};
++
++static const struct snd_soc_dapm_route audio_map[] = {
++  {"Headphone Jack", NULL, "HPLOUT"},
++  {"Headphone Jack", NULL, "HPROUT"},
++
++  /* Line Out connected to LLOUT, RLOUT */
++  {"Line Out", NULL, "LLOUT"},
++  {"Line Out", NULL, "RLOUT"},
++
++  /* Line In connected to (LINE1L | LINE2L), (LINE1R | LINE2R) */
++  {"LINE1L", NULL, "Line In"},
++  {"LINE1R", NULL, "Line In"},
++};
++
++/* Logic for a aic3x as connected on a davinci-evm */
++static int avila_aic3x_init(struct snd_soc_pcm_runtime *rtd)
++{
++	struct snd_soc_codec *codec = rtd->codec;
++	struct snd_soc_dapm_context *dapm = &codec->dapm;
++
++  /* Add davinci-evm specific widgets */
++  snd_soc_dapm_new_controls(dapm, aic3x_dapm_widgets,
++          ARRAY_SIZE(aic3x_dapm_widgets));
++
++  /* Set up davinci-evm specific audio path audio_map */
++  snd_soc_dapm_add_routes(dapm, audio_map, ARRAY_SIZE(audio_map));
++
++  /* not connected */
++  snd_soc_dapm_disable_pin(dapm, "MONO_LOUT");
++  //snd_soc_dapm_disable_pin(dapm, "HPLCOM");
++  //snd_soc_dapm_disable_pin(dapm, "HPRCOM");
++  snd_soc_dapm_disable_pin(dapm, "MIC3L");
++  snd_soc_dapm_disable_pin(dapm, "MIC3R");
++  snd_soc_dapm_disable_pin(dapm, "LINE2L");
++  snd_soc_dapm_disable_pin(dapm, "LINE2R");
++
++  /* always connected */
++	snd_soc_dapm_enable_pin(dapm, "Headphone Jack");
++  snd_soc_dapm_enable_pin(dapm, "Line Out");
++  snd_soc_dapm_enable_pin(dapm, "Line In");
++
++  snd_soc_dapm_sync(dapm);
++
++	return 0;
++}
++
++static struct snd_soc_ops gw_avila_board_ops = {
++	.startup = gw_avila_board_startup,
++	.hw_params = gw_avila_hw_params,
++};
++
++static struct snd_soc_dai_link gw_avila_board_dai[] = {
++	{
++		.name = "HSS-0",
++		.stream_name = "HSS-0",
++		.cpu_dai_name = "gw_avila_hss.0",
++		.codec_dai_name = "tlv320aic3x-hifi",
++		.codec_name = "tlv320aic3x-codec.0-001b",
++		.platform_name = "gw_avila-audio.0",
++		.init = avila_aic3x_init,
++		.ops = &gw_avila_board_ops,
++	},{
++		.name = "HSS-1",
++		.stream_name = "HSS-1",
++		.cpu_dai_name = "gw_avila_hss.1",
++		.codec_dai_name = "tlv320aic3x-hifi",
++		.codec_name = "tlv320aic3x-codec.0-001a",
++		.platform_name = "gw_avila-audio.1",
++		.init = avila_aic3x_init,
++		.ops = &gw_avila_board_ops,
++	},{
++		.name = "HSS-2",
++		.stream_name = "HSS-2",
++		.cpu_dai_name = "gw_avila_hss.2",
++		.codec_dai_name = "tlv320aic3x-hifi",
++		.codec_name = "tlv320aic3x-codec.0-0019",
++		.platform_name = "gw_avila-audio.2",
++		.init = avila_aic3x_init,
++		.ops = &gw_avila_board_ops,
++	},{
++		.name = "HSS-3",
++		.stream_name = "HSS-3",
++		.cpu_dai_name = "gw_avila_hss.3",
++		.codec_dai_name = "tlv320aic3x-hifi",
++		.codec_name = "tlv320aic3x-codec.0-0018",
++		.platform_name = "gw_avila-audio.3",
++		.init = avila_aic3x_init,
++		.ops = &gw_avila_board_ops,
++	},
++};
++
++static struct snd_soc_card gw_avila_board[] = {
++	{
++		.name = "gw_avila-board.0",
++		.owner = THIS_MODULE,
++		.dai_link = &gw_avila_board_dai[0],
++		.num_links = 1,
++	},{
++		.name = "gw_avila-board.1",
++		.owner = THIS_MODULE,
++		.dai_link = &gw_avila_board_dai[1],
++		.num_links = 1,
++	},{
++		.name = "gw_avila-board.2",
++		.owner = THIS_MODULE,
++		.dai_link = &gw_avila_board_dai[2],
++		.num_links = 1,
++	},{
++		.name = "gw_avila-board.3",
++		.owner = THIS_MODULE,
++		.dai_link = &gw_avila_board_dai[3],
++		.num_links = 1,
++	}
++};
++
++static struct platform_device *gw_avila_board_snd_device[4];
++
++static int __init gw_avila_board_init(void)
++{
++	int ret;
++	struct port *port;
++	int i;
++
++	if ((hss_port[0] = kzalloc(sizeof(*port), GFP_KERNEL)) == NULL)
++		return -ENOMEM;
++
++	if ((hss_port[1] = kzalloc(sizeof(*port), GFP_KERNEL)) == NULL)
++		return -ENOMEM;
++
++	for (i = 0; i < 4; i++) {
++		gw_avila_board_snd_device[i] = platform_device_alloc("soc-audio", i);
++		if (!gw_avila_board_snd_device[i]) {
++			return -ENOMEM;
++		}
++
++		platform_set_drvdata(gw_avila_board_snd_device[i], &gw_avila_board[i]);
++		ret = platform_device_add(gw_avila_board_snd_device[i]);
++
++		if (ret) {
++			platform_device_put(gw_avila_board_snd_device[i]);
++		}
++	}
++	return ret;
++}
++
++static void __exit gw_avila_board_exit(void)
++{
++	int i;
++	for (i = 0; i < 4; i++)
++		platform_device_unregister(gw_avila_board_snd_device[i]);
++}
++
++module_init(gw_avila_board_init);
++module_exit(gw_avila_board_exit);
++
++/* Module information */
++MODULE_AUTHOR("Chris Lang");
++MODULE_DESCRIPTION("ALSA SoC HSS Audio gw_avila board");
++MODULE_LICENSE("GPL");
+--- /dev/null
++++ b/sound/soc/gw-avila/ixp4xx_hss.c
+@@ -0,0 +1,902 @@
++/*
++ * Intel IXP4xx HSS (synchronous serial port) driver for Linux
++ *
++ * Copyright (C) 2009 Chris Lang <clang@gateworks.com>
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of version 2 of the GNU General Public License
++ * as published by the Free Software Foundation.
++ */
++
++#include <linux/module.h>
++#include <linux/bitops.h>
++#include <linux/cdev.h>
++#include <linux/dma-mapping.h>
++#include <linux/dmapool.h>
++#include <linux/fs.h>
++#include <linux/io.h>
++#include <linux/kernel.h>
++#include <linux/platform_device.h>
++#include <linux/poll.h>
++#include <linux/slab.h>
++#include <linux/delay.h>
++
++#include <mach/npe.h>
++#include <mach/qmgr.h>
++
++#include "ixp4xx_hss.h"
++
++/*****************************************************************************
++ * global variables
++ ****************************************************************************/
++
++void hss_chan_read(unsigned long data);
++static char lock_init = 0;
++static spinlock_t npe_lock;
++static struct npe *npe;
++
++static const struct {
++	int tx, txdone, rx, rxfree, chan;
++}queue_ids[2] = {{HSS0_PKT_TX0_QUEUE, HSS0_PKT_TXDONE_QUEUE, HSS0_PKT_RX_QUEUE,
++		  HSS0_PKT_RXFREE0_QUEUE, HSS0_CHL_RXTRIG_QUEUE},
++		 {HSS1_PKT_TX0_QUEUE, HSS1_PKT_TXDONE_QUEUE, HSS1_PKT_RX_QUEUE,
++		  HSS1_PKT_RXFREE0_QUEUE, HSS1_CHL_RXTRIG_QUEUE},
++};
++
++struct port *hss_port[2];
++struct hss_device *hss_handle[32];
++EXPORT_SYMBOL(hss_handle);
++
++/*****************************************************************************
++ * utility functions
++ ****************************************************************************/
++
++#ifndef __ARMEB__
++static inline void memcpy_swab32(u32 *dest, u32 *src, int cnt)
++{
++	int i;
++	for (i = 0; i < cnt; i++)
++		dest[i] = swab32(src[i]);
++}
++#endif
++
++static inline unsigned int sub_offset(unsigned int a, unsigned int b,
++				      unsigned int modulo)
++{
++	return (modulo /* make sure the result >= 0 */ + a - b) % modulo;
++}
++
++/*****************************************************************************
++ * HSS access
++ ****************************************************************************/
++
++static void hss_config_load(struct port *port)
++{
++	struct msg msg;
++
++	do {
++		memset(&msg, 0, sizeof(msg));
++		msg.cmd = PORT_CONFIG_LOAD;
++		msg.hss_port = port->id;
++		if (npe_send_message(npe, &msg, "HSS_LOAD_CONFIG"))
++			break;
++		if (npe_recv_message(npe, &msg, "HSS_LOAD_CONFIG"))
++			break;
++
++		/* HSS_LOAD_CONFIG for port #1 returns port_id = #4 */
++		if (msg.cmd != PORT_CONFIG_LOAD || msg.data32)
++			break;
++
++		/* HDLC may stop working without this */
++		npe_recv_message(npe, &msg, "FLUSH_IT");
++		return;
++	} while (0);
++
++	printk(KERN_CRIT "HSS-%i: unable to reload HSS configuration\n",
++	       port->id);
++	BUG();
++}
++
++static void hss_config_set_pcr(struct port *port)
++{
++	struct msg msg;
++
++	do {
++		memset(&msg, 0, sizeof(msg));
++		msg.cmd = PORT_CONFIG_WRITE;
++		msg.hss_port = port->id;
++		msg.index = HSS_CONFIG_TX_PCR;
++#if 0
++		msg.data32 = PCR_FRM_SYNC_RISINGEDGE | PCR_MSB_ENDIAN |
++			PCR_TX_DATA_ENABLE | PCR_TX_UNASS_HIGH_IMP | PCR_TX_V56K_HIGH_IMP | PCR_TX_FB_HIGH_IMP;
++#else
++		msg.data32 = PCR_FRM_SYNC_RISINGEDGE | PCR_MSB_ENDIAN |
++			PCR_TX_DATA_ENABLE | PCR_TX_FB_HIGH_IMP | PCR_DCLK_EDGE_RISING;
++#endif
++		if (port->frame_size % 8 == 0)
++			msg.data32 |= PCR_SOF_NO_FBIT;
++
++		if (npe_send_message(npe, &msg, "HSS_SET_TX_PCR"))
++			break;
++
++		msg.index = HSS_CONFIG_RX_PCR;
++		msg.data32 &= ~ (PCR_DCLK_EDGE_RISING | PCR_FCLK_EDGE_RISING | PCR_TX_DATA_ENABLE);
++
++		if (npe_send_message(npe, &msg, "HSS_SET_RX_PCR"))
++			break;
++		return;
++	} while (0);
++
++	printk(KERN_CRIT "HSS-%i: unable to set HSS PCR registers\n", port->id);
++	BUG();
++}
++
++static void hss_config_set_core(struct port *port)
++{
++	struct msg msg;
++
++	memset(&msg, 0, sizeof(msg));
++	msg.cmd = PORT_CONFIG_WRITE;
++	msg.hss_port = port->id;
++	msg.index = HSS_CONFIG_CORE_CR;
++#if 0
++	msg.data32 = 0 | CCR_LOOPBACK |
++		(port->id ? CCR_SECOND_HSS : 0);
++#else
++	msg.data32 = 0 |
++		(port->id ? CCR_SECOND_HSS : 0);
++#endif
++	if (npe_send_message(npe, &msg, "HSS_SET_CORE_CR")) {
++		printk(KERN_CRIT "HSS-%i: unable to set HSS core control"
++		       " register\n", port->id);
++		BUG();
++	}
++}
++
++static void hss_config_set_line(struct port *port)
++{
++	struct msg msg;
++
++	hss_config_set_pcr(port);
++	hss_config_set_core(port);
++
++	memset(&msg, 0, sizeof(msg));
++	msg.cmd = PORT_CONFIG_WRITE;
++	msg.hss_port = port->id;
++	msg.index = HSS_CONFIG_CLOCK_CR;
++	msg.data32 = CLK42X_SPEED_8192KHZ /* FIXME */;
++	if (npe_send_message(npe, &msg, "HSS_SET_CLOCK_CR")) {
++		printk(KERN_CRIT "HSS-%i: unable to set HSS clock control"
++		       " register\n", port->id);
++		BUG();
++	}
++}
++
++static void hss_config_set_rx_frame(struct port *port)
++{
++	struct msg msg;
++
++	memset(&msg, 0, sizeof(msg));
++	msg.cmd = PORT_CONFIG_WRITE;
++	msg.hss_port = port->id;
++	msg.index = HSS_CONFIG_RX_FCR;
++	msg.data16a = port->frame_sync_offset;
++	msg.data16b = port->frame_size - 1;
++	if (npe_send_message(npe, &msg, "HSS_SET_RX_FCR")) {
++		printk(KERN_CRIT "HSS-%i: unable to set HSS RX frame size"
++		       " and offset\n", port->id);
++		BUG();
++	}
++}
++
++static void hss_config_set_frame(struct port *port)
++{
++	struct msg msg;
++
++	memset(&msg, 0, sizeof(msg));
++	msg.cmd = PORT_CONFIG_WRITE;
++	msg.hss_port = port->id;
++	msg.index = HSS_CONFIG_TX_FCR;
++	msg.data16a = TX_FRAME_SYNC_OFFSET;
++	msg.data16b = port->frame_size - 1;
++	if (npe_send_message(npe, &msg, "HSS_SET_TX_FCR")) {
++		printk(KERN_CRIT "HSS-%i: unable to set HSS TX frame size"
++		       " and offset\n", port->id);
++		BUG();
++	}
++	hss_config_set_rx_frame(port);
++}
++
++static void hss_config_set_lut(struct port *port)
++{
++	struct msg msg;
++	int chan_count = 32;
++
++	memset(&msg, 0, sizeof(msg));
++	msg.cmd = PORT_CONFIG_WRITE;
++	msg.hss_port = port->id;
++
++	msg.index = HSS_CONFIG_TX_LUT;
++	msg.data32 = 0xffffffff;
++	npe_send_message(npe, &msg, "HSS_SET_TX_LUT");
++	msg.index += 4;
++	npe_send_message(npe, &msg, "HSS_SET_TX_LUT");
++	msg.data32 = 0x0;
++	msg.index += 4;
++	npe_send_message(npe, &msg, "HSS_SET_TX_LUT");
++	msg.index += 4;
++	npe_send_message(npe, &msg, "HSS_SET_TX_LUT");
++	msg.index += 4;
++	npe_send_message(npe, &msg, "HSS_SET_TX_LUT");
++	msg.index += 4;
++	npe_send_message(npe, &msg, "HSS_SET_TX_LUT");
++	msg.index += 4;
++	npe_send_message(npe, &msg, "HSS_SET_TX_LUT");
++	msg.index += 4;
++	npe_send_message(npe, &msg, "HSS_SET_TX_LUT");
++
++	msg.index = HSS_CONFIG_RX_LUT;
++	msg.data32 = 0xffffffff;
++	npe_send_message(npe, &msg, "HSS_SET_RX_LUT");
++	msg.index += 4;
++	npe_send_message(npe, &msg, "HSS_SET_RX_LUT");
++	msg.data32 = 0x0;
++	msg.index += 4;
++	npe_send_message(npe, &msg, "HSS_SET_RX_LUT");
++	msg.index += 4;
++	npe_send_message(npe, &msg, "HSS_SET_RX_LUT");
++	msg.index += 4;
++	npe_send_message(npe, &msg, "HSS_SET_RX_LUT");
++	msg.index += 4;
++	npe_send_message(npe, &msg, "HSS_SET_RX_LUT");
++	msg.index += 4;
++	npe_send_message(npe, &msg, "HSS_SET_RX_LUT");
++	msg.index += 4;
++	npe_send_message(npe, &msg, "HSS_SET_RX_LUT");
++
++	hss_config_set_frame(port);
++
++	memset(&msg, 0, sizeof(msg));
++	msg.cmd = CHAN_NUM_CHANS_WRITE;
++	msg.hss_port = port->id;
++	msg.data8a = chan_count;
++	if (npe_send_message(npe, &msg, "CHAN_NUM_CHANS_WRITE")) {
++		printk(KERN_CRIT "HSS-%i: unable to set HSS channel count\n",
++		       port->id);
++		BUG();
++	}
++}
++
++static u32 hss_config_get_status(struct port *port)
++{
++	struct msg msg;
++
++	do {
++		memset(&msg, 0, sizeof(msg));
++		msg.cmd = PORT_ERROR_READ;
++		msg.hss_port = port->id;
++		if (npe_send_message(npe, &msg, "PORT_ERROR_READ"))
++			break;
++		if (npe_recv_message(npe, &msg, "PORT_ERROR_READ"))
++			break;
++
++		return msg.data32;
++	} while (0);
++
++	printk(KERN_CRIT "HSS-%i: unable to read HSS status\n", port->id);
++	BUG();
++}
++
++static void hss_config_start_chan(struct port *port)
++{
++	struct msg msg;
++
++	port->chan_last_tx = 0;
++	port->chan_last_rx = 0;
++
++	do {
++		memset(&msg, 0, sizeof(msg));
++		msg.cmd = CHAN_RX_BUF_ADDR_WRITE;
++		msg.hss_port = port->id;
++		msg.data32 = port->chan_rx_buf_phys;
++		if (npe_send_message(npe, &msg, "CHAN_RX_BUF_ADDR_WRITE"))
++			break;
++
++		memset(&msg, 0, sizeof(msg));
++		msg.cmd = CHAN_TX_BUF_ADDR_WRITE;
++		msg.hss_port = port->id;
++		msg.data32 = port->chan_tx_pointers_phys;
++		if (npe_send_message(npe, &msg, "CHAN_TX_BUF_ADDR_WRITE"))
++			break;
++
++		memset(&msg, 0, sizeof(msg));
++		msg.cmd = CHAN_FLOW_ENABLE;
++		msg.hss_port = port->id;
++		if (npe_send_message(npe, &msg, "CHAN_FLOW_ENABLE"))
++			break;
++		port->chan_started = 1;
++		return;
++	} while (0);
++
++	printk(KERN_CRIT "HSS-%i: unable to start channelized flow\n",
++	       port->id);
++	BUG();
++}
++
++static void hss_config_stop_chan(struct port *port)
++{
++	struct msg msg;
++
++	if (!port->chan_started)
++		return;
++
++	memset(&msg, 0, sizeof(msg));
++	msg.cmd = CHAN_FLOW_DISABLE;
++	msg.hss_port = port->id;
++	if (npe_send_message(npe, &msg, "CHAN_FLOW_DISABLE")) {
++		printk(KERN_CRIT "HSS-%i: unable to stop channelized flow\n",
++		       port->id);
++		BUG();
++	}
++	hss_config_get_status(port); /* make sure it's halted */
++	port->chan_started = 0;
++}
++
++static int hss_config_load_firmware(struct port *port)
++{
++	struct msg msg;
++
++	if (port->initialized)
++		return 0;
++
++	if (!npe_running(npe)) {
++		int err;
++		if ((err = npe_load_firmware(npe, "NPE-A-HSS",
++					     port->dev)))
++			return err;
++	}
++
++	do {
++		/* HSS main configuration */
++		hss_config_set_line(port);
++
++		hss_config_set_frame(port);
++
++		/* Channelized operation settings */
++		memset(&msg, 0, sizeof(msg));
++		msg.cmd = CHAN_TX_BLK_CFG_WRITE;
++		msg.hss_port = port->id;
++		msg.data8b = (CHAN_TX_LIST_FRAMES & ~7) / 2;
++		msg.data8a = msg.data8b / 4;
++		msg.data8d = CHAN_TX_LIST_FRAMES - msg.data8b;
++		msg.data8c = msg.data8d / 4;
++		if (npe_send_message(npe, &msg, "CHAN_TX_BLK_CFG_WRITE"))
++			break;
++
++		memset(&msg, 0, sizeof(msg));
++		msg.cmd = CHAN_RX_BUF_CFG_WRITE;
++		msg.hss_port = port->id;
++		msg.data8a = CHAN_RX_TRIGGER / 8;
++		msg.data8b = CHAN_RX_FRAMES;
++		if (npe_send_message(npe, &msg, "CHAN_RX_BUF_CFG_WRITE"))
++			break;
++
++		memset(&msg, 0, sizeof(msg));
++		msg.cmd = CHAN_TX_BUF_SIZE_WRITE;
++		msg.hss_port = port->id;
++		msg.data8a = CHAN_TX_LISTS;
++		if (npe_send_message(npe, &msg, "CHAN_TX_BUF_SIZE_WRITE"))
++			break;
++
++		port->initialized = 1;
++		return 0;
++	} while (0);
++
++	printk(KERN_CRIT "HSS-%i: unable to start HSS operation\n", port->id);
++	BUG();
++}
++
++void hss_chan_irq(void *pdev)
++{
++	struct port *port = pdev;
++
++	qmgr_disable_irq(queue_ids[port->id].chan);
++
++	tasklet_hi_schedule(&port->task);
++}
++
++
++int hss_prepare_chan(struct port *port)
++{
++	int err, i, j;
++	u32 *temp;
++	u32 temp2;
++	u8 *temp3;
++
++	if (port->initialized)
++		return 0;
++
++	if ((err = hss_config_load_firmware(port)))
++		return err;
++
++	if ((err = qmgr_request_queue(queue_ids[port->id].chan,
++				      CHAN_QUEUE_LEN, 0, 0, "%s:hss", "hss")))
++		return err;
++
++	port->chan_tx_buf = dma_alloc_coherent(port->dev, chan_tx_buf_len(port), &port->chan_tx_buf_phys, GFP_DMA);
++	memset(port->chan_tx_buf, 0, chan_tx_buf_len(port));
++
++	port->chan_tx_pointers = dma_alloc_coherent(port->dev, chan_tx_buf_len(port) / CHAN_TX_LIST_FRAMES * 4, &port->chan_tx_pointers_phys, GFP_DMA);
++
++	temp3 = port->chan_tx_buf;
++	for (i = 0; i < CHAN_TX_LISTS; i++) {
++		for (j = 0; j < 8; j++) {
++			port->tx_lists[i][j] = temp3;
++			temp3 += CHAN_TX_LIST_FRAMES * 4;
++		}
++	}
++
++	temp = port->chan_tx_pointers;
++	temp2 = port->chan_tx_buf_phys;
++	for (i = 0; i < CHAN_TX_LISTS; i++)
++	{
++		for (j = 0; j < 32; j++)
++		{
++			*temp = temp2;
++			temp2 += CHAN_TX_LIST_FRAMES;
++			temp++;
++		}
++	}
++
++	port->chan_rx_buf = dma_alloc_coherent(port->dev, chan_rx_buf_len(port), &port->chan_rx_buf_phys, GFP_DMA);
++
++	for (i = 0; i < 8; i++) {
++		temp3 = port->chan_rx_buf + (i * 4 * 128);
++		for (j = 0; j < 8; j++) {
++			port->rx_frames[i][j] = temp3;
++			temp3 += CHAN_RX_TRIGGER;
++		}
++	}
++
++	qmgr_set_irq(queue_ids[port->id].chan, QUEUE_IRQ_SRC_NOT_EMPTY,
++		     hss_chan_irq, port);
++
++	return 0;
++
++}
++
++int hss_tx_start(struct hss_device *hdev)
++{
++	unsigned long flags;
++	struct port *port = hdev->port;
++
++	hdev->tx_loc = 0;
++	hdev->tx_frame = 0;
++
++	set_bit((1 << hdev->id), &port->chan_tx_bitmap);
++
++	if (!port->chan_started)
++	{
++		qmgr_enable_irq(queue_ids[port->id].chan);
++		spin_lock_irqsave(&npe_lock, flags);
++		hss_config_start_chan(port);
++		spin_unlock_irqrestore(&npe_lock, flags);
++		hss_chan_irq(port);
++	}
++
++	return 0;
++}
++EXPORT_SYMBOL(hss_tx_start);
++
++int hss_rx_start(struct hss_device *hdev)
++{
++	unsigned long flags;
++	struct port *port = hdev->port;
++
++	hdev->rx_loc = 0;
++	hdev->rx_frame = 0;
++
++	set_bit((1 << hdev->id), &port->chan_rx_bitmap);
++
++	if (!port->chan_started)
++	{
++		qmgr_enable_irq(queue_ids[port->id].chan);
++		spin_lock_irqsave(&npe_lock, flags);
++		hss_config_start_chan(port);
++		spin_unlock_irqrestore(&npe_lock, flags);
++		hss_chan_irq(port);
++	}
++
++	return 0;
++}
++EXPORT_SYMBOL(hss_rx_start);
++
++int hss_tx_stop(struct hss_device *hdev)
++{
++	struct port *port = hdev->port;
++
++	clear_bit((1 << hdev->id), &port->chan_tx_bitmap);
++
++	return 0;
++}
++EXPORT_SYMBOL(hss_tx_stop);
++
++int hss_rx_stop(struct hss_device *hdev)
++{
++	struct port *port = hdev->port;
++
++	clear_bit((1 << hdev->id), &port->chan_rx_bitmap);
++
++	return 0;
++}
++EXPORT_SYMBOL(hss_rx_stop);
++
++int hss_chan_open(struct hss_device *hdev)
++{
++	struct port *port = hdev->port;
++	int i, err = 0;
++
++	if (port->chan_open)
++		return 0;
++
++	if (port->mode == MODE_HDLC) {
++		err = -ENOSYS;
++		goto out;
++	}
++
++	if (port->mode == MODE_G704 && port->channels[0] == hdev->id) {
++		err = -EBUSY; /* channel #0 is used for G.704 signaling */
++		goto out;
++	}
++
++	for (i = MAX_CHANNELS; i > port->frame_size / 8; i--)
++		if (port->channels[i - 1] == hdev->id) {
++			err = -ECHRNG; /* frame too short */
++			goto out;
++		}
++
++	hdev->rx_loc = hdev->tx_loc = 0;
++	hdev->rx_frame = hdev->tx_frame = 0;
++
++	//clear_bit((1 << hdev->id), &port->chan_rx_bitmap);
++	//clear_bit((1 << hdev->id), &port->chan_tx_bitmap);
++
++	if (!port->initialized) {
++		hss_prepare_chan(port);
++
++		hss_config_stop_chan(port);
++		hdev->open_count++;
++		port->chan_open_count++;
++
++		hss_config_set_lut(port);
++		hss_config_load(port);
++
++	}
++	port->chan_open = 1;
++
++out:
++	return err;
++}
++EXPORT_SYMBOL(hss_chan_open);
++
++int hss_chan_close(struct hss_device *hdev)
++{
++	return 0;
++}
++EXPORT_SYMBOL(hss_chan_close);
++
++void hss_chan_read(unsigned long data)
++{
++	struct port *port = (void *)data;
++	struct hss_device *hdev;
++	u8 *hw_buf, *save_buf;
++	u8 *buf;
++	u32 v;
++  unsigned int tx_list, rx_frame;
++	int i, j, channel;
++	u8 more_work = 0;
++
++/*
++	My Data in the hardware buffer is scattered by channels into 4 trunks
++	as follows for rx
++
++					channel 0					channel 1					channel 2					channel 3
++Trunk 1	=	0			-> 	127			128		->	255			256		->	383			384		->	512
++Trunk 2 =	513		->	639			640		->	768			769		->	895			896		->	1023
++Trunk 3 =	1024	->	1151		1152	->	1207		1208	->	1407		1408	->	1535
++Trunk 4 = 1535	->	1663		1664	->	1791		1792	->	1920		1921	->	2047
++
++	I will get CHAN_RX_TRIGGER worth of bytes out of each channel on each trunk
++	with each IRQ
++
++	For TX Data, it is split into 8 lists with each list containing 16 bytes per
++	channel
++
++Trunk 1 = 0		->	16				17		->	32			33		->	48			49		->	64
++Trunk 2 = 65	->	80				81		->	96			97		->	112			113		->	128
++Trunk	3	=	129	->	144				145		->	160			161		->	176			177		->	192
++Trunk	4	=	193	->	208				209		->	224			225		->	240			241		->	256
++
++*/
++
++
++	while ((v = qmgr_get_entry(queue_ids[port->id].chan)))
++	{
++		tx_list = (v >> 8) & 0xFF;
++		rx_frame = v & 0xFF;
++
++		if (tx_list == 7)
++			tx_list = 0;
++		else
++			tx_list++;
++		for (channel = 0; channel < 8; channel++) {
++
++			hdev = port->chan_devices[channel];
++			if (!hdev)
++				continue;
++
++			if (test_bit(1 << channel, &port->chan_tx_bitmap)) {
++				buf = (u8 *)hdev->tx_buf + hdev->tx_loc;
++#if 0
++				hw_buf = (u8 *)port->chan_tx_buf;
++				hw_buf += (tx_list * CHAN_TX_LIST_FRAMES * 32);
++				hw_buf += (4 * CHAN_TX_LIST_FRAMES * channel);
++				save_buf = hw_buf;
++#else
++				save_buf = port->tx_lists[tx_list][channel];
++#endif
++				for (i = 0; i < CHAN_TX_LIST_FRAMES; i++) {
++					hw_buf = save_buf + i;
++					for (j = 0; j < 4; j++) {
++						*hw_buf = *(buf++);
++						hw_buf += CHAN_TX_LIST_FRAMES;
++					}
++
++					hdev->tx_loc += 4;
++					hdev->tx_frame++;
++					if (hdev->tx_loc >= hdev->tx_buffer_size) {
++						hdev->tx_loc = 0;
++						buf = (u8 *)hdev->tx_buf;
++					}
++				}
++			} else {
++#if 0
++				hw_buf = (u8 *)port->chan_tx_buf;
++				hw_buf += (tx_list * CHAN_TX_LIST_FRAMES * 32);
++				hw_buf += (4 * CHAN_TX_LIST_FRAMES * channel);
++#else
++				hw_buf = port->tx_lists[tx_list][channel];
++#endif
++				memset(hw_buf, 0, 64);
++			}
++
++			if (hdev->tx_frame >= hdev->tx_period_size && test_bit(1 << channel, &port->chan_tx_bitmap))
++			{
++				hdev->tx_frame %= hdev->tx_period_size;
++				if (hdev->tx_callback)
++					hdev->tx_callback(hdev->tx_data);
++				more_work = 1;
++			}
++
++			if (test_bit(1 << channel, &port->chan_rx_bitmap)) {
++				buf = (u8 *)hdev->rx_buf + hdev->rx_loc;
++#if 0
++				hw_buf = (u8 *)port->chan_rx_buf;
++				hw_buf += (4 * CHAN_RX_FRAMES * channel);
++				hw_buf += rx_frame;
++				save_buf = hw_buf;
++#else
++				save_buf = port->rx_frames[channel][rx_frame >> 4];
++#endif
++				for (i = 0; i < CHAN_RX_TRIGGER; i++) {
++					hw_buf = save_buf + i;
++					for (j = 0; j < 4; j++) {
++						*(buf++) = *hw_buf;
++						hw_buf += CHAN_RX_FRAMES;
++					}
++					hdev->rx_loc += 4;
++					hdev->rx_frame++;
++					if (hdev->rx_loc >= hdev->rx_buffer_size) {
++						hdev->rx_loc = 0;
++						buf = (u8 *)hdev->rx_buf;
++					}
++				}
++			}
++
++			if (hdev->rx_frame >= hdev->rx_period_size && test_bit(1 << channel, &port->chan_rx_bitmap))
++			{
++				hdev->rx_frame %= hdev->rx_period_size;
++				if (hdev->rx_callback)
++					hdev->rx_callback(hdev->rx_data);
++				more_work = 1;
++			}
++		}
++#if 0
++		if (more_work)
++		{
++			tasklet_hi_schedule(&port->task);
++			return;
++		}
++#endif
++	}
++
++	qmgr_enable_irq(queue_ids[port->id].chan);
++
++	return;
++
++}
++
++struct hss_device *hss_chan_create(struct port *port, unsigned int channel)
++{
++	struct hss_device *chan_dev;
++	unsigned long flags;
++
++	chan_dev = kzalloc(sizeof(struct hss_device), GFP_KERNEL);
++
++	spin_lock_irqsave(&npe_lock, flags);
++
++	chan_dev->id = channel;
++	chan_dev->port = port;
++
++	port->channels[channel] = channel;
++
++	port->chan_devices[channel] = chan_dev;
++
++	spin_unlock_irqrestore(&npe_lock, flags);
++
++	return chan_dev;
++}
++
++/*****************************************************************************
++ * initialization
++ ****************************************************************************/
++
++static struct platform_device gw_avila_hss_device_0 = {
++  .name     = "ixp4xx_hss",
++  .id       = 0,
++};
++
++static struct platform_device gw_avila_hss_device_1 = {
++  .name     = "ixp4xx_hss",
++  .id       = 1,
++};
++
++static struct platform_device *gw_avila_hss_port_0;
++static struct platform_device *gw_avila_hss_port_1;
++static u64 hss_dmamask = 0xFFFFFFFF;
++
++struct hss_device *hss_init(int id, int channel)
++{
++	struct port *port = hss_port[id];
++	struct hss_device *hdev;
++	int ret;
++
++	if (!lock_init)
++	{
++		spin_lock_init(&npe_lock);
++		lock_init = 1;
++		npe = npe_request(0);
++	}
++
++	if (!port->init) {
++		if (id == 0) {
++			gw_avila_hss_port_0 = platform_device_alloc("hss-port", 0);
++
++			platform_set_drvdata(gw_avila_hss_port_0, &gw_avila_hss_device_0);
++			port->dev = &gw_avila_hss_port_0->dev;
++
++			if (!port->dev->dma_mask)
++		    port->dev->dma_mask = &hss_dmamask;
++		  if (!port->dev->coherent_dma_mask)
++	    	port->dev->coherent_dma_mask = 0xFFFFFFFF;
++
++			ret = platform_device_add(gw_avila_hss_port_0);
++
++		  if (ret)
++	  	  platform_device_put(gw_avila_hss_port_0);
++
++			tasklet_init(&port->task, hss_chan_read, (unsigned long) port);
++		}
++		else
++		{
++			gw_avila_hss_port_1 = platform_device_alloc("hss-port", 1);
++
++			platform_set_drvdata(gw_avila_hss_port_1, &gw_avila_hss_device_1);
++			port->dev = &gw_avila_hss_port_1->dev;
++
++			if (!port->dev->dma_mask)
++		    port->dev->dma_mask = &hss_dmamask;
++		  if (!port->dev->coherent_dma_mask)
++	    	port->dev->coherent_dma_mask = 0xFFFFFFFF;
++
++			ret = platform_device_add(gw_avila_hss_port_1);
++
++		  if (ret)
++	  	  platform_device_put(gw_avila_hss_port_1);
++
++			tasklet_init(&port->task, hss_chan_read, (unsigned long) port);
++		}
++
++		port->init = 1;
++		port->id = id;
++		port->clock_type = CLOCK_EXT;
++		port->clock_rate = 8192000;
++		port->frame_size = 256; /* E1 */
++		port->mode = MODE_RAW;
++		port->next_rx_frame = 0;
++		memset(port->channels, CHANNEL_UNUSED, sizeof(port->channels));
++	}
++
++	hdev = hss_chan_create(port, channel);
++
++	return hdev;
++}
++EXPORT_SYMBOL(hss_init);
++
++int hss_set_tx_callback(struct hss_device *hdev, void (*tx_callback)(void *), void *tx_data)
++{
++  BUG_ON(tx_callback == NULL);
++  hdev->tx_callback = tx_callback;
++  hdev->tx_data = tx_data;
++
++  return 0;
++}
++EXPORT_SYMBOL(hss_set_tx_callback);
++
++int hss_set_rx_callback(struct hss_device *hdev, void (*rx_callback)(void *), void *rx_data)
++{
++  BUG_ON(rx_callback == NULL);
++  hdev->rx_callback = rx_callback;
++  hdev->rx_data = rx_data;
++
++  return 0;
++}
++EXPORT_SYMBOL(hss_set_rx_callback);
++
++int hss_config_rx_dma(struct hss_device *hdev, void *buf, size_t buffer_size, size_t period_size)
++{
++	/*
++	 * Period Size and Buffer Size are in Frames which are u32
++	 * We convert the u32 *buf to u8 in order to make channel reads
++	 * and rx_loc easier
++	 */
++
++	hdev->rx_buf = (u8 *)buf;
++	hdev->rx_buffer_size = buffer_size << 2;
++	hdev->rx_period_size = period_size;
++
++	return 0;
++}
++EXPORT_SYMBOL(hss_config_rx_dma);
++
++int hss_config_tx_dma(struct hss_device *hdev, void *buf, size_t buffer_size, size_t period_size)
++{
++	/*
++	 * Period Size and Buffer Size are in Frames which are u32
++	 * We convert the u32 *buf to u8 in order to make channel reads
++	 * and rx_loc easier
++	 */
++
++	hdev->tx_buf = (u8 *)buf;
++	hdev->tx_buffer_size = buffer_size << 2;
++	hdev->tx_period_size = period_size;
++
++	return 0;
++}
++EXPORT_SYMBOL(hss_config_tx_dma);
++
++unsigned long hss_curr_offset_rx(struct hss_device *hdev)
++{
++	return hdev->rx_loc >> 2;
++}
++EXPORT_SYMBOL(hss_curr_offset_rx);
++
++unsigned long hss_curr_offset_tx(struct hss_device *hdev)
++{
++	return hdev->tx_loc >> 2;
++}
++EXPORT_SYMBOL(hss_curr_offset_tx);
++
++MODULE_AUTHOR("Chris Lang");
++MODULE_DESCRIPTION("Intel IXP4xx HSS Audio driver");
++MODULE_LICENSE("GPL v2");
+--- /dev/null
++++ b/sound/soc/gw-avila/ixp4xx_hss.h
+@@ -0,0 +1,401 @@
++/*
++ *
++ *
++ * Copyright (C) 2009 Gateworks Corporation
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of version 2 of the GNU General Public License
++ * as published by the Free Software Foundation.
++ */
++
++#include <linux/types.h>
++#include <linux/bitops.h>
++#include <linux/dma-mapping.h>
++#include <linux/dmapool.h>
++#include <linux/fs.h>
++#include <linux/io.h>
++#include <linux/kernel.h>
++#include <linux/platform_device.h>
++#include <linux/poll.h>
++#include <mach/npe.h>
++#include <mach/qmgr.h>
++#include <linux/interrupt.h>
++
++//#include <linux/hdlc.h> XXX We aren't HDLC
++
++#define DEBUG_QUEUES		0
++#define DEBUG_DESC		0
++#define DEBUG_RX		0
++#define DEBUG_TX		0
++#define DEBUG_PKT_BYTES		0
++#define DEBUG_CLOSE		0
++#define DEBUG_FRAMER		0
++
++#define DRV_NAME		"ixp4xx_hss"
++
++#define PKT_EXTRA_FLAGS		0 /* orig 1 */
++#define TX_FRAME_SYNC_OFFSET	0 /* channelized */
++#define PKT_NUM_PIPES		1 /* 1, 2 or 4 */
++#define PKT_PIPE_FIFO_SIZEW	4 /* total 4 dwords per HSS */
++
++#define RX_DESCS		512 /* also length of all RX queues */
++#define TX_DESCS		512 /* also length of all TX queues */
++
++//#define POOL_ALLOC_SIZE		(sizeof(struct desc) * (RX_DESCS + TX_DESCS))
++#define RX_SIZE			(HDLC_MAX_MRU + 4) /* NPE needs more space */
++#define MAX_CLOSE_WAIT		1000 /* microseconds */
++#define HSS_COUNT		2
++#define MIN_FRAME_SIZE		16   /* bits */
++#define MAX_FRAME_SIZE		257  /* 256 bits + framing bit */
++#define MAX_CHANNELS		(MAX_FRAME_SIZE / 8)
++#define MAX_CHAN_DEVICES	32
++#define CHANNEL_HDLC		0xFE
++#define CHANNEL_UNUSED		0xFF
++
++#define NAPI_WEIGHT		16
++#define CHAN_RX_TRIGGER		16 /* 8 RX frames = 1 ms @ E1 */
++#define CHAN_RX_FRAMES		128
++#define CHAN_RX_TRUNKS		1
++#define MAX_CHAN_RX_BAD_SYNC	(CHAN_RX_TRIGGER / 2 /* pairs */ - 3)
++
++#define CHAN_TX_LIST_FRAMES	CHAN_RX_TRIGGER /* bytes/channel per list, 16 - 48 */
++#define CHAN_TX_LISTS		8
++#define CHAN_TX_TRUNKS CHAN_RX_TRUNKS
++#define CHAN_TX_FRAMES		(CHAN_TX_LIST_FRAMES * CHAN_TX_LISTS)
++
++#define CHAN_QUEUE_LEN		32 /* minimum possible */
++
++#define chan_rx_buf_len(port)	(port->frame_size / 8 * CHAN_RX_FRAMES * CHAN_RX_TRUNKS)
++#define chan_tx_buf_len(port) (port->frame_size / 8 * CHAN_TX_FRAMES * CHAN_TX_TRUNKS)
++
++/* Queue IDs */
++#define HSS0_CHL_RXTRIG_QUEUE	12	/* orig size = 32 dwords */
++#define HSS0_PKT_RX_QUEUE	13	/* orig size = 32 dwords */
++#define HSS0_PKT_TX0_QUEUE	14	/* orig size = 16 dwords */
++#define HSS0_PKT_TX1_QUEUE	15
++#define HSS0_PKT_TX2_QUEUE	16
++#define HSS0_PKT_TX3_QUEUE	17
++#define HSS0_PKT_RXFREE0_QUEUE	18	/* orig size = 16 dwords */
++#define HSS0_PKT_RXFREE1_QUEUE	19
++#define HSS0_PKT_RXFREE2_QUEUE	20
++#define HSS0_PKT_RXFREE3_QUEUE	21
++#define HSS0_PKT_TXDONE_QUEUE	22	/* orig size = 64 dwords */
++
++#define HSS1_CHL_RXTRIG_QUEUE	10
++#define HSS1_PKT_RX_QUEUE	0
++#define HSS1_PKT_TX0_QUEUE	5
++#define HSS1_PKT_TX1_QUEUE	6
++#define HSS1_PKT_TX2_QUEUE	7
++#define HSS1_PKT_TX3_QUEUE	8
++#define HSS1_PKT_RXFREE0_QUEUE	1
++#define HSS1_PKT_RXFREE1_QUEUE	2
++#define HSS1_PKT_RXFREE2_QUEUE	3
++#define HSS1_PKT_RXFREE3_QUEUE	4
++#define HSS1_PKT_TXDONE_QUEUE	9
++
++#define NPE_PKT_MODE_HDLC		0
++#define NPE_PKT_MODE_RAW		1
++#define NPE_PKT_MODE_56KMODE		2
++#define NPE_PKT_MODE_56KENDIAN_MSB	4
++
++/* PKT_PIPE_HDLC_CFG_WRITE flags */
++#define PKT_HDLC_IDLE_ONES		0x1 /* default = flags */
++#define PKT_HDLC_CRC_32			0x2 /* default = CRC-16 */
++#define PKT_HDLC_MSB_ENDIAN		0x4 /* default = LE */
++
++
++/* hss_config, PCRs */
++/* Frame sync sampling, default = active low */
++#define PCR_FRM_SYNC_ACTIVE_HIGH	0x40000000
++#define PCR_FRM_SYNC_FALLINGEDGE	0x80000000
++#define PCR_FRM_SYNC_RISINGEDGE		0xC0000000
++
++/* Frame sync pin: input (default) or output generated off a given clk edge */
++#define PCR_FRM_SYNC_OUTPUT_FALLING	0x20000000
++#define PCR_FRM_SYNC_OUTPUT_RISING	0x30000000
++
++/* Frame and data clock sampling on edge, default = falling */
++#define PCR_FCLK_EDGE_RISING		0x08000000
++#define PCR_DCLK_EDGE_RISING		0x04000000
++
++/* Clock direction, default = input */
++#define PCR_SYNC_CLK_DIR_OUTPUT		0x02000000
++
++/* Generate/Receive frame pulses, default = enabled */
++#define PCR_FRM_PULSE_DISABLED		0x01000000
++
++ /* Data rate is full (default) or half the configured clk speed */
++#define PCR_HALF_CLK_RATE		0x00200000
++
++/* Invert data between NPE and HSS FIFOs? (default = no) */
++#define PCR_DATA_POLARITY_INVERT	0x00100000
++
++/* TX/RX endianness, default = LSB */
++#define PCR_MSB_ENDIAN			0x00080000
++
++/* Normal (default) / open drain mode (TX only) */
++#define PCR_TX_PINS_OPEN_DRAIN		0x00040000
++
++/* No framing bit transmitted and expected on RX? (default = framing bit) */
++#define PCR_SOF_NO_FBIT			0x00020000
++
++/* Drive data pins? */
++#define PCR_TX_DATA_ENABLE		0x00010000
++
++/* Voice 56k type: drive the data pins low (default), high, high Z */
++#define PCR_TX_V56K_HIGH		0x00002000
++#define PCR_TX_V56K_HIGH_IMP		0x00004000
++
++/* Unassigned type: drive the data pins low (default), high, high Z */
++#define PCR_TX_UNASS_HIGH		0x00000800
++#define PCR_TX_UNASS_HIGH_IMP		0x00001000
++
++/* T1 @ 1.544MHz only: Fbit dictated in FIFO (default) or high Z */
++#define PCR_TX_FB_HIGH_IMP		0x00000400
++
++/* 56k data endiannes - which bit unused: high (default) or low */
++#define PCR_TX_56KE_BIT_0_UNUSED	0x00000200
++
++/* 56k data transmission type: 32/8 bit data (default) or 56K data */
++#define PCR_TX_56KS_56K_DATA		0x00000100
++
++/* hss_config, cCR */
++/* Number of packetized clients, default = 1 */
++#define CCR_NPE_HFIFO_2_HDLC		0x04000000
++#define CCR_NPE_HFIFO_3_OR_4HDLC	0x08000000
++
++/* default = no loopback */
++#define CCR_LOOPBACK			0x02000000
++
++/* HSS number, default = 0 (first) */
++#define CCR_SECOND_HSS			0x01000000
++
++
++/* hss_config, clkCR: main:10, num:10, denom:12 */
++#define CLK42X_SPEED_EXP	((0x3FF << 22) | (  2 << 12) |   15) /*65 KHz*/
++
++#define CLK42X_SPEED_512KHZ	((  130 << 22) | (  2 << 12) |   15)
++#define CLK42X_SPEED_1536KHZ	((   43 << 22) | ( 18 << 12) |   47)
++#define CLK42X_SPEED_1544KHZ	((   43 << 22) | ( 33 << 12) |  192)
++#define CLK42X_SPEED_2048KHZ	((   32 << 22) | ( 34 << 12) |   63)
++#define CLK42X_SPEED_4096KHZ	((   16 << 22) | ( 34 << 12) |  127)
++#define CLK42X_SPEED_8192KHZ	((    8 << 22) | ( 34 << 12) |  255)
++
++#define CLK46X_SPEED_512KHZ	((  130 << 22) | ( 24 << 12) |  127)
++#define CLK46X_SPEED_1536KHZ	((   43 << 22) | (152 << 12) |  383)
++#define CLK46X_SPEED_1544KHZ	((   43 << 22) | ( 66 << 12) |  385)
++#define CLK46X_SPEED_2048KHZ	((   32 << 22) | (280 << 12) |  511)
++#define CLK46X_SPEED_4096KHZ	((   16 << 22) | (280 << 12) | 1023)
++#define CLK46X_SPEED_8192KHZ	((    8 << 22) | (280 << 12) | 2047)
++
++
++/* hss_config, LUT entries */
++#define TDMMAP_UNASSIGNED	0
++#define TDMMAP_HDLC		1	/* HDLC - packetized */
++#define TDMMAP_VOICE56K		2	/* Voice56K - 7-bit channelized */
++#define TDMMAP_VOICE64K		3	/* Voice64K - 8-bit channelized */
++
++/* offsets into HSS config */
++#define HSS_CONFIG_TX_PCR	0x00 /* port configuration registers */
++#define HSS_CONFIG_RX_PCR	0x04
++#define HSS_CONFIG_CORE_CR	0x08 /* loopback control, HSS# */
++#define HSS_CONFIG_CLOCK_CR	0x0C /* clock generator control */
++#define HSS_CONFIG_TX_FCR	0x10 /* frame configuration registers */
++#define HSS_CONFIG_RX_FCR	0x14
++#define HSS_CONFIG_TX_LUT	0x18 /* channel look-up tables */
++#define HSS_CONFIG_RX_LUT	0x38
++
++
++/* NPE command codes */
++/* writes the ConfigWord value to the location specified by offset */
++#define PORT_CONFIG_WRITE		0x40
++
++/* triggers the NPE to load the contents of the configuration table */
++#define PORT_CONFIG_LOAD		0x41
++
++/* triggers the NPE to return an HssErrorReadResponse message */
++#define PORT_ERROR_READ			0x42
++
++/* reset NPE internal status and enable the HssChannelized operation */
++#define CHAN_FLOW_ENABLE		0x43
++#define CHAN_FLOW_DISABLE		0x44
++#define CHAN_IDLE_PATTERN_WRITE		0x45
++#define CHAN_NUM_CHANS_WRITE		0x46
++#define CHAN_RX_BUF_ADDR_WRITE		0x47
++#define CHAN_RX_BUF_CFG_WRITE		0x48
++#define CHAN_TX_BLK_CFG_WRITE		0x49
++#define CHAN_TX_BUF_ADDR_WRITE		0x4A
++#define CHAN_TX_BUF_SIZE_WRITE		0x4B
++#define CHAN_TSLOTSWITCH_ENABLE		0x4C
++#define CHAN_TSLOTSWITCH_DISABLE	0x4D
++
++/* downloads the gainWord value for a timeslot switching channel associated
++   with bypassNum */
++#define CHAN_TSLOTSWITCH_GCT_DOWNLOAD	0x4E
++
++/* triggers the NPE to reset internal status and enable the HssPacketized
++   operation for the flow specified by pPipe */
++#define PKT_PIPE_FLOW_ENABLE		0x50
++#define PKT_PIPE_FLOW_DISABLE		0x51
++#define PKT_NUM_PIPES_WRITE		0x52
++#define PKT_PIPE_FIFO_SIZEW_WRITE	0x53
++#define PKT_PIPE_HDLC_CFG_WRITE		0x54
++#define PKT_PIPE_IDLE_PATTERN_WRITE	0x55
++#define PKT_PIPE_RX_SIZE_WRITE		0x56
++#define PKT_PIPE_MODE_WRITE		0x57
++
++/* HDLC packet status values - desc->status */
++#define ERR_SHUTDOWN		1 /* stop or shutdown occurrance */
++#define ERR_HDLC_ALIGN		2 /* HDLC alignment error */
++#define ERR_HDLC_FCS		3 /* HDLC Frame Check Sum error */
++#define ERR_RXFREE_Q_EMPTY	4 /* RX-free queue became empty while receiving
++				     this packet (if buf_len < pkt_len) */
++#define ERR_HDLC_TOO_LONG	5 /* HDLC frame size too long */
++#define ERR_HDLC_ABORT		6 /* abort sequence received */
++#define ERR_DISCONNECTING	7 /* disconnect is in progress */
++
++#define CLOCK_EXT 0
++#define CLOCK_INT 1
++
++enum mode {MODE_HDLC = 0, MODE_RAW, MODE_G704};
++enum rx_tx_bit {
++	TX_BIT = 0,
++	RX_BIT = 1
++};
++enum chan_bit {
++	CHAN_0 = (1 << 0),
++	CHAN_1 = (1 << 1),
++	CHAN_2 = (1 << 2),
++	CHAN_3 = (1 << 3),
++	CHAN_4 = (1 << 4),
++	CHAN_5 = (1 << 5),
++	CHAN_6 = (1 << 6),
++	CHAN_7 = (1 << 7),
++	CHAN_8 = (1 << 8),
++	CHAN_9 = (1 << 9),
++	CHAN_10 = (1 << 10),
++	CHAN_11 = (1 << 11),
++	CHAN_12 = (1 << 12),
++	CHAN_13 = (1 << 13),
++	CHAN_14 = (1 << 14),
++	CHAN_15 = (1 << 15)
++};
++
++enum alignment { NOT_ALIGNED = 0, EVEN_FIRST, ODD_FIRST };
++
++#ifdef __ARMEB__
++typedef struct sk_buff buffer_t;
++#define free_buffer dev_kfree_skb
++#define free_buffer_irq dev_kfree_skb_irq
++#else
++typedef void buffer_t;
++#define free_buffer kfree
++#define free_buffer_irq kfree
++#endif
++
++struct hss_device {
++	struct port *port;
++	unsigned int open_count, excl_open;
++	unsigned long tx_loc, rx_loc; /* bytes */
++	unsigned long tx_frame, rx_frame; /* Frames */
++	u8 id, chan_count;
++	u8 log_channels[MAX_CHANNELS];
++
++  u8 *rx_buf;
++  u8 *tx_buf;
++
++	size_t rx_buffer_size;
++	size_t rx_period_size;
++	size_t tx_buffer_size;
++	size_t tx_period_size;
++
++  void (*rx_callback)(void *data);
++  void *rx_data;
++  void (*tx_callback)(void *data);
++  void *tx_data;
++  void *private_data;
++};
++
++extern struct hss_device *hss_handle[32];
++extern struct port *hss_port[2];
++
++struct port {
++	unsigned char init;
++
++	struct device *dev;
++
++	struct tasklet_struct task;
++	unsigned int id;
++	unsigned long chan_rx_bitmap;
++	unsigned long chan_tx_bitmap;
++	unsigned char chan_open;
++
++	/* the following fields must be protected by npe_lock */
++	enum mode mode;
++	unsigned int clock_type, clock_rate, loopback;
++	unsigned int frame_size, frame_sync_offset;
++	unsigned int next_rx_frame;
++
++	struct hss_device *chan_devices[MAX_CHAN_DEVICES];
++	u32 chan_tx_buf_phys, chan_rx_buf_phys;
++	u32	chan_tx_pointers_phys;
++	u32 *chan_tx_pointers;
++	u8 *chan_rx_buf;
++	u8 *chan_tx_buf;
++	u8 *tx_lists[CHAN_TX_LISTS][8];
++	u8 *rx_frames[8][CHAN_TX_LISTS];
++	unsigned int chan_open_count, hdlc_open;
++	unsigned int chan_started, initialized, just_set_offset;
++	unsigned int chan_last_rx, chan_last_tx;
++
++	/* assigned channels, may be invalid with given frame length or mode */
++	u8 channels[MAX_CHANNELS];
++	int msg_count;
++};
++
++/* NPE message structure */
++struct msg {
++#ifdef __ARMEB__
++	u8 cmd, unused, hss_port, index;
++	union {
++		struct { u8 data8a, data8b, data8c, data8d; };
++		struct { u16 data16a, data16b; };
++		struct { u32 data32; };
++	};
++#else
++	u8 index, hss_port, unused, cmd;
++	union {
++		struct { u8 data8d, data8c, data8b, data8a; };
++		struct { u16 data16b, data16a; };
++		struct { u32 data32; };
++	};
++#endif
++};
++
++#define rx_desc_phys(port, n)	((port)->desc_tab_phys +		\
++				 (n) * sizeof(struct desc))
++#define rx_desc_ptr(port, n)	(&(port)->desc_tab[n])
++
++#define tx_desc_phys(port, n)	((port)->desc_tab_phys +		\
++				 ((n) + RX_DESCS) * sizeof(struct desc))
++#define tx_desc_ptr(port, n)	(&(port)->desc_tab[(n) + RX_DESCS])
++
++int hss_prepare_chan(struct port *port);
++void hss_chan_stop(struct port *port);
++
++struct hss_device *hss_init(int id, int channel);
++int hss_chan_open(struct hss_device *hdev);
++int hss_chan_close(struct hss_device *hdev);
++
++int hss_set_tx_callback(struct hss_device *hdev, void (*tx_callback)(void *), void *tx_data);
++int hss_set_rx_callback(struct hss_device *hdev, void (*rx_callback)(void *), void *rx_data);
++int hss_tx_start(struct hss_device *hdev);
++int hss_tx_stop(struct hss_device *hdev);
++int hss_rx_start(struct hss_device *hdev);
++int hss_rx_stop(struct hss_device *hdev);
++
++int hss_config_rx_dma(struct hss_device *hdev, void *buf, size_t buffer_size, size_t period_size);
++int hss_config_tx_dma(struct hss_device *hdev, void *buf, size_t buffer_size, size_t period_size);
++unsigned long hss_curr_offset_rx(struct hss_device *hdev);
++unsigned long hss_curr_offset_tx(struct hss_device *hdev);
++
diff --git a/target/linux/ixp4xx/patches-4.1/180-tw5334_support.patch b/target/linux/ixp4xx/patches-4.1/180-tw5334_support.patch
new file mode 100644
index 0000000..b56fbb7
--- /dev/null
+++ b/target/linux/ixp4xx/patches-4.1/180-tw5334_support.patch
@@ -0,0 +1,287 @@
+--- a/arch/arm/mach-ixp4xx/Kconfig
++++ b/arch/arm/mach-ixp4xx/Kconfig
+@@ -160,6 +160,14 @@ config ARCH_PRPMC1100
+ 	  PrPCM1100 Processor Mezanine Module. For more information on
+ 	  this platform, see <file:Documentation/arm/IXP4xx>.
+ 
++config MACH_TW5334
++	bool "Titan Wireless TW-533-4"
++	select PCI
++	help
++	  Say 'Y' here if you want your kernel to support the Titan
++	  Wireless TW533-4. For more information on this platform,
++	  see http://openwrt.org
++
+ config MACH_NAS100D
+ 	bool
+ 	prompt "NAS100D"
+--- a/arch/arm/mach-ixp4xx/Makefile
++++ b/arch/arm/mach-ixp4xx/Makefile
+@@ -24,6 +24,7 @@ obj-pci-$(CONFIG_MACH_SIDEWINDER)	+= sid
+ obj-pci-$(CONFIG_MACH_COMPEXWP18)	+= ixdp425-pci.o
+ obj-pci-$(CONFIG_MACH_WRT300NV2)		+= wrt300nv2-pci.o
+ obj-pci-$(CONFIG_MACH_AP1000)		+= ixdp425-pci.o
++obj-pci-$(CONFIG_MACH_TW5334)		+= tw5334-pci.o
+ 
+ obj-y	+= common.o
+ 
+@@ -49,6 +50,7 @@ obj-$(CONFIG_MACH_SIDEWINDER)	+= sidewin
+ obj-$(CONFIG_MACH_COMPEXWP18)	+= compex42x-setup.o
+ obj-$(CONFIG_MACH_WRT300NV2)	+= wrt300nv2-setup.o
+ obj-$(CONFIG_MACH_AP1000)	+= ap1000-setup.o
++obj-$(CONFIG_MACH_TW5334)	+= tw5334-setup.o
+ 
+ obj-$(CONFIG_PCI)		+= $(obj-pci-$(CONFIG_PCI)) common-pci.o
+ obj-$(CONFIG_IXP4XX_QMGR)	+= ixp4xx_qmgr.o
+--- a/arch/arm/mach-ixp4xx/include/mach/uncompress.h
++++ b/arch/arm/mach-ixp4xx/include/mach/uncompress.h
+@@ -44,7 +44,7 @@ static __inline__ void __arch_decomp_set
+ 	    machine_is_gateway7001() || machine_is_wg302v2() ||
+ 	    machine_is_devixp() || machine_is_miccpt() || machine_is_mic256() ||
+ 	    machine_is_pronghorn() || machine_is_pronghorn_metro() ||
+-	    machine_is_wrt300nv2())
++	    machine_is_wrt300nv2() || machine_is_tw5334())
+ 		uart_base = (volatile u32*) IXP4XX_UART2_BASE_PHYS;
+ 	else
+ 		uart_base = (volatile u32*) IXP4XX_UART1_BASE_PHYS;
+--- /dev/null
++++ b/arch/arm/mach-ixp4xx/tw5334-pci.c
+@@ -0,0 +1,68 @@
++/*
++ * arch/arch/mach-ixp4xx/tw5334-pci.c
++ *
++ * PCI setup routines for the Titan Wireless TW-533-4
++ *
++ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
++ *
++ * based on coyote-pci.c:
++ *	Copyright (C) 2002 Jungo Software Technologies.
++ *	Copyright (C) 2003 MontaVista Softwrae, Inc.
++ *
++ * Maintainer: Imre Kaloz <kaloz@openwrt.org>
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ *
++ */
++
++#include <linux/kernel.h>
++#include <linux/pci.h>
++#include <linux/init.h>
++#include <linux/irq.h>
++
++#include <asm/mach-types.h>
++#include <mach/hardware.h>
++
++#include <asm/mach/pci.h>
++
++void __init tw5334_pci_preinit(void)
++{
++	irq_set_irq_type(IRQ_IXP4XX_GPIO6, IRQ_TYPE_LEVEL_LOW);
++	irq_set_irq_type(IRQ_IXP4XX_GPIO2, IRQ_TYPE_LEVEL_LOW);
++	irq_set_irq_type(IRQ_IXP4XX_GPIO1, IRQ_TYPE_LEVEL_LOW);
++	irq_set_irq_type(IRQ_IXP4XX_GPIO0, IRQ_TYPE_LEVEL_LOW);
++
++	ixp4xx_pci_preinit();
++}
++
++static int __init tw5334_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
++{
++	if (slot == 12)
++		return IRQ_IXP4XX_GPIO6;
++	else if (slot == 13)
++		return IRQ_IXP4XX_GPIO2;
++	else if (slot == 14)
++		return IRQ_IXP4XX_GPIO1;
++	else if (slot == 15)
++		return IRQ_IXP4XX_GPIO0;
++	else return -1;
++}
++
++struct hw_pci tw5334_pci __initdata = {
++	.nr_controllers = 1,
++	.preinit =        tw5334_pci_preinit,
++	.ops =            &ixp4xx_ops,
++	.setup =          ixp4xx_setup,
++	.map_irq =        tw5334_map_irq,
++};
++
++int __init tw5334_pci_init(void)
++{
++	if (machine_is_tw5334())
++		pci_common_init(&tw5334_pci);
++	return 0;
++}
++
++subsys_initcall(tw5334_pci_init);
+--- /dev/null
++++ b/arch/arm/mach-ixp4xx/tw5334-setup.c
+@@ -0,0 +1,167 @@
++/*
++ * arch/arm/mach-ixp4xx/tw5334-setup.c
++ *
++ * Board setup for the Titan Wireless TW-533-4
++ *
++ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
++ *
++ * based on coyote-setup.c:
++ *      Copyright (C) 2003-2005 MontaVista Software, Inc.
++ *
++ * Author: Imre Kaloz <Kaloz@openwrt.org>
++ */
++
++#include <linux/if_ether.h>
++#include <linux/kernel.h>
++#include <linux/init.h>
++#include <linux/device.h>
++#include <linux/serial.h>
++#include <linux/tty.h>
++#include <linux/serial_8250.h>
++#include <linux/slab.h>
++
++#include <asm/types.h>
++#include <asm/setup.h>
++#include <asm/memory.h>
++#include <mach/hardware.h>
++#include <asm/irq.h>
++#include <asm/mach-types.h>
++#include <asm/mach/arch.h>
++#include <asm/mach/flash.h>
++
++static struct flash_platform_data tw5334_flash_data = {
++	.map_name	= "cfi_probe",
++	.width		= 2,
++};
++
++static struct resource tw5334_flash_resource = {
++	.flags		= IORESOURCE_MEM,
++};
++
++static struct platform_device tw5334_flash = {
++	.name		= "IXP4XX-Flash",
++	.id		= 0,
++	.dev		= {
++		.platform_data = &tw5334_flash_data,
++	},
++	.num_resources	= 1,
++	.resource	= &tw5334_flash_resource,
++};
++
++static struct resource tw5334_uart_resource = {
++	.start	= IXP4XX_UART2_BASE_PHYS,
++	.end	= IXP4XX_UART2_BASE_PHYS + 0x0fff,
++	.flags	= IORESOURCE_MEM,
++};
++
++static struct plat_serial8250_port tw5334_uart_data[] = {
++	{
++		.mapbase	= IXP4XX_UART2_BASE_PHYS,
++		.membase	= (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
++		.irq		= IRQ_IXP4XX_UART2,
++		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
++		.iotype		= UPIO_MEM,
++		.regshift	= 2,
++		.uartclk	= IXP4XX_UART_XTAL,
++	},
++	{ },
++};
++
++static struct platform_device tw5334_uart = {
++	.name		= "serial8250",
++	.id		= PLAT8250_DEV_PLATFORM,
++	.dev			= {
++		.platform_data	= tw5334_uart_data,
++	},
++	.num_resources	= 1,
++	.resource	= &tw5334_uart_resource,
++};
++
++/* Built-in 10/100 Ethernet MAC interfaces */
++static struct eth_plat_info tw5334_plat_eth[] = {
++        {
++                .phy            = 0,
++                .rxq            = 3,
++		.txreadyq	= 20,
++        }, {
++                .phy            = 1,
++                .rxq            = 4,
++		.txreadyq	= 21,
++	}
++};
++
++static struct platform_device tw5334_eth[] = {
++        {
++                .name                   = "ixp4xx_eth",
++                .id                     = IXP4XX_ETH_NPEB,
++                .dev.platform_data      = tw5334_plat_eth,
++		.dev.coherent_dma_mask	= DMA_BIT_MASK(32),
++        }, {
++                .name                   = "ixp4xx_eth",
++                .id                     = IXP4XX_ETH_NPEC,
++                .dev.platform_data      = tw5334_plat_eth + 1,
++		.dev.coherent_dma_mask	= DMA_BIT_MASK(32),
++	}
++};
++
++static struct platform_device *tw5334_devices[] __initdata = {
++	&tw5334_flash,
++	&tw5334_uart,
++	&tw5334_eth[0],
++	&tw5334_eth[1],
++};
++
++static void __init tw5334_init(void)
++{
++	uint8_t __iomem *f;
++	int i;
++
++	ixp4xx_sys_init();
++
++	tw5334_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
++	tw5334_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + SZ_32M - 1;
++
++	*IXP4XX_EXP_CS0 |= IXP4XX_FLASH_WRITABLE;
++	*IXP4XX_EXP_CS1 = *IXP4XX_EXP_CS0;
++
++	platform_add_devices(tw5334_devices, ARRAY_SIZE(tw5334_devices));
++
++	/*
++	 * Map in a portion of the flash and read the MAC addresses.
++	 * Since it is stored in BE in the flash itself, we need to
++	 * byteswap it if we're in LE mode.
++	 */
++	f = ioremap(IXP4XX_EXP_BUS_BASE(0), 0x1000000);
++	if (f) {
++		for (i = 0; i < 6; i++) {
++#ifdef __ARMEB__
++			tw5334_plat_eth[0].hwaddr[i] = readb(f + 0xFC0422 + i);
++			tw5334_plat_eth[1].hwaddr[i] = readb(f + 0xFC043B + i);
++#else
++			tw5334_plat_eth[0].hwaddr[i] = readb(f + 0xFC0422 + (i^3));
++			tw5334_plat_eth[1].hwaddr[i] = readb(f + 0xFC043B + (i^3));
++#endif
++		}
++		iounmap(f);
++	}
++
++	printk(KERN_INFO "TW-533-4: Using MAC address %pM for port 0\n",
++		tw5334_plat_eth[0].hwaddr);
++	printk(KERN_INFO "TW-533-4: Using MAC address %pM for port 1\n",
++		tw5334_plat_eth[1].hwaddr);
++}
++
++#ifdef CONFIG_MACH_TW5334
++MACHINE_START(TW5334, "Titan Wireless TW-533-4")
++	/* Maintainer: Imre Kaloz <kaloz@openwrt.org> */
++	.map_io		= ixp4xx_map_io,
++	.init_irq	= ixp4xx_init_irq,
++	.init_time	= ixp4xx_timer_init,
++	.atag_offset	= 0x0100,
++	.init_machine	= tw5334_init,
++#if defined(CONFIG_PCI)
++	.dma_zone_size	= SZ_64M,
++#endif
++	.restart	= ixp4xx_restart,
++MACHINE_END
++#endif
diff --git a/target/linux/ixp4xx/patches-4.1/185-mi424wr_support.patch b/target/linux/ixp4xx/patches-4.1/185-mi424wr_support.patch
new file mode 100644
index 0000000..81713b3
--- /dev/null
+++ b/target/linux/ixp4xx/patches-4.1/185-mi424wr_support.patch
@@ -0,0 +1,507 @@
+--- a/arch/arm/configs/ixp4xx_defconfig
++++ b/arch/arm/configs/ixp4xx_defconfig
+@@ -26,6 +26,7 @@ CONFIG_MACH_NAS100D=y
+ CONFIG_MACH_DSMG600=y
+ CONFIG_MACH_FSG=y
+ CONFIG_MACH_GTWX5715=y
++CONFIG_MACH_MI424WR=y
+ CONFIG_IXP4XX_QMGR=y
+ CONFIG_IXP4XX_NPE=y
+ # CONFIG_ARM_THUMB is not set
+--- a/arch/arm/mach-ixp4xx/Kconfig
++++ b/arch/arm/mach-ixp4xx/Kconfig
+@@ -258,6 +258,13 @@ config MACH_MIC256
+ 	  Say 'Y' here if you want your kernel to support the MIC256
+ 	  board from OMICRON electronics GmbH.
+ 
++config MACH_MI424WR
++	bool "Actiontec MI424WR"
++	depends on ARCH_IXP4XX
++	select PCI
++	help
++		Add support for the Actiontec MI424-WR.
++
+ comment "IXP4xx Options"
+ 
+ config IXP4XX_INDIRECT_PCI
+--- a/arch/arm/mach-ixp4xx/Makefile
++++ b/arch/arm/mach-ixp4xx/Makefile
+@@ -25,6 +25,7 @@ obj-pci-$(CONFIG_MACH_COMPEXWP18)	+= ixd
+ obj-pci-$(CONFIG_MACH_WRT300NV2)		+= wrt300nv2-pci.o
+ obj-pci-$(CONFIG_MACH_AP1000)		+= ixdp425-pci.o
+ obj-pci-$(CONFIG_MACH_TW5334)		+= tw5334-pci.o
++obj-pci-$(CONFIG_MACH_MI424WR)		+= mi424wr-pci.o
+ 
+ obj-y	+= common.o
+ 
+@@ -51,6 +52,7 @@ obj-$(CONFIG_MACH_COMPEXWP18)	+= compex4
+ obj-$(CONFIG_MACH_WRT300NV2)	+= wrt300nv2-setup.o
+ obj-$(CONFIG_MACH_AP1000)	+= ap1000-setup.o
+ obj-$(CONFIG_MACH_TW5334)	+= tw5334-setup.o
++obj-$(CONFIG_MACH_MI424WR)	+= mi424wr-setup.o
+ 
+ obj-$(CONFIG_PCI)		+= $(obj-pci-$(CONFIG_PCI)) common-pci.o
+ obj-$(CONFIG_IXP4XX_QMGR)	+= ixp4xx_qmgr.o
+--- /dev/null
++++ b/arch/arm/mach-ixp4xx/mi424wr-pci.c
+@@ -0,0 +1,70 @@
++/*
++ * arch/arm/mach-ixp4xx/mi424wr-pci.c
++ *
++ * Actiontec MI424WR board-level PCI initialization
++ *
++ * Copyright (C) 2008 Jose Vasconcellos
++ *
++ * Maintainer: Jose Vasconcellos <jvasco@verizon.net>
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ *
++ */
++
++#include <linux/kernel.h>
++#include <linux/pci.h>
++#include <linux/init.h>
++#include <linux/irq.h>
++
++#include <asm/mach-types.h>
++#include <asm/mach/pci.h>
++
++/* PCI controller GPIO to IRQ pin mappings
++ * This information was obtained from Actiontec's GPL release.
++ *
++ *		INTA		INTB
++ * SLOT 13	8		6
++ * SLOT 14	7		8
++ * SLOT 15	6		7
++ */
++
++void __init mi424wr_pci_preinit(void)
++{
++	irq_set_irq_type(IRQ_IXP4XX_GPIO6, IRQ_TYPE_LEVEL_LOW);
++	irq_set_irq_type(IRQ_IXP4XX_GPIO7, IRQ_TYPE_LEVEL_LOW);
++	irq_set_irq_type(IRQ_IXP4XX_GPIO8, IRQ_TYPE_LEVEL_LOW);
++
++	ixp4xx_pci_preinit();
++}
++
++static int __init mi424wr_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
++{
++	if (slot == 13)
++		return IRQ_IXP4XX_GPIO8;
++	if (slot == 14)
++		return IRQ_IXP4XX_GPIO7;
++	if (slot == 15)
++		return IRQ_IXP4XX_GPIO6;
++
++	return -1;
++}
++
++struct hw_pci mi424wr_pci __initdata = {
++	.nr_controllers = 1,
++	.preinit	= mi424wr_pci_preinit,
++	.ops		= &ixp4xx_ops,
++	.setup		= ixp4xx_setup,
++	.map_irq	= mi424wr_map_irq,
++};
++
++int __init mi424wr_pci_init(void)
++{
++	if (machine_is_mi424wr())
++		pci_common_init(&mi424wr_pci);
++	return 0;
++}
++
++subsys_initcall(mi424wr_pci_init);
++
+--- /dev/null
++++ b/arch/arm/mach-ixp4xx/mi424wr-setup.c
+@@ -0,0 +1,387 @@
++/*
++ * arch/arm/mach-ixp4xx/mi424wr-setup.c
++ *
++ * Actiontec MI424-WR board setup
++ * Copyright (c) 2008 Jose Vasconcellos
++ *
++ * Based on Gemtek GTWX5715 by
++ * Copyright (C) 2004 George T. Joseph
++ * Derived from Coyote
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * as published by the Free Software Foundation; either version 2
++ * of the License, or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
++ *
++ */
++
++#include <linux/init.h>
++#include <linux/device.h>
++#include <linux/serial.h>
++#include <linux/serial_8250.h>
++#include <linux/types.h>
++#include <linux/memory.h>
++#include <linux/leds.h>
++#include <linux/spi/spi_gpio_old.h>
++#include <linux/dma-mapping.h>
++
++#include <asm/setup.h>
++#include <asm/system_info.h>
++#include <asm/irq.h>
++#include <asm/io.h>
++#include <asm/mach-types.h>
++#include <asm/mach/arch.h>
++#include <asm/mach/flash.h>
++
++/*
++ * GPIO 2,3,4 and 9 are hard wired to the Micrel/Kendin KS8995M Switch
++ * and operate as an SPI type interface.  The details of the interface
++ * are available on Kendin/Micrel's web site.
++ */
++
++#define MI424WR_KSSPI_SELECT		9
++#define MI424WR_KSSPI_TXD		4
++#define MI424WR_KSSPI_CLOCK		2
++#define MI424WR_KSSPI_RXD		3
++
++/*
++ * The "reset" button is wired to GPIO 10.
++ * The GPIO is brought "low" when the button is pushed.
++ */
++
++#define MI424WR_BUTTON_GPIO	10
++#define MI424WR_BUTTON_IRQ	IRQ_IXP4XX_GPIO10
++
++#define MI424WR_MOCA_WAN_LED	11
++
++/* Latch on CS1 - taken from Actiontec's 2.4 source code
++ * 
++ * default latch value
++ * 0  - power alarm led (red)           0 (off)
++ * 1  - power led (green)               0 (off)
++ * 2  - wireless led    (green)         1 (off)
++ * 3  - no internet led (red)           0 (off)
++ * 4  - internet ok led (green)         0 (off)
++ * 5  - moca LAN                        0 (off)
++ * 6  - WAN alarm led (red)		0 (off)
++ * 7  - PCI reset                       1 (not reset)
++ * 8  - IP phone 1 led (green)          1 (off)
++ * 9  - IP phone 2 led (green)          1 (off)
++ * 10 - VOIP ready led (green)          1 (off)
++ * 11 - PSTN relay 1 control            0 (PSTN)
++ * 12 - PSTN relay 1 control            0 (PSTN)
++ * 13 - N/A
++ * 14 - N/A
++ * 15 - N/A
++ */
++
++#define MI424WR_LATCH_MASK              0x04
++#define MI424WR_LATCH_DEFAULT           0x1f86
++
++#define MI424WR_LATCH_ALARM_LED         0x00
++#define MI424WR_LATCH_POWER_LED         0x01
++#define MI424WR_LATCH_WIRELESS_LED      0x02
++#define MI424WR_LATCH_INET_DOWN_LED     0x03
++#define MI424WR_LATCH_INET_OK_LED       0x04
++#define MI424WR_LATCH_MOCA_LAN_LED      0x05
++#define MI424WR_LATCH_WAN_ALARM_LED     0x06
++#define MI424WR_LATCH_PCI_RESET         0x07
++#define MI424WR_LATCH_PHONE1_LED        0x08
++#define MI424WR_LATCH_PHONE2_LED        0x09
++#define MI424WR_LATCH_VOIP_LED          0x10
++#define MI424WR_LATCH_PSTN_RELAY1       0x11
++#define MI424WR_LATCH_PSTN_RELAY2       0x12
++
++/* initialize CS1 to default timings, Intel style, 16-bit bus */
++#define MI424WR_CS1_CONFIG	0x80000002
++
++/* Define both UARTs but they are not easily accessible.
++ */
++
++static struct resource mi424wr_uart_resources[] = {
++	{
++		.start	= IXP4XX_UART1_BASE_PHYS,
++		.end	= IXP4XX_UART1_BASE_PHYS + 0x0fff,
++		.flags	= IORESOURCE_MEM,
++	},
++	{
++		.start	= IXP4XX_UART2_BASE_PHYS,
++		.end	= IXP4XX_UART2_BASE_PHYS + 0x0fff,
++		.flags	= IORESOURCE_MEM,
++	}
++};
++
++
++static struct plat_serial8250_port mi424wr_uart_platform_data[] = {
++	{
++		.mapbase	= IXP4XX_UART1_BASE_PHYS,
++		.membase	= (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET,
++		.irq		= IRQ_IXP4XX_UART1,
++		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
++		.iotype		= UPIO_MEM,
++		.regshift	= 2,
++		.uartclk	= IXP4XX_UART_XTAL,
++	},
++	{
++		.mapbase	= IXP4XX_UART2_BASE_PHYS,
++		.membase	= (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
++		.irq		= IRQ_IXP4XX_UART2,
++		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
++		.iotype		= UPIO_MEM,
++		.regshift	= 2,
++		.uartclk	= IXP4XX_UART_XTAL,
++	},
++	{ },
++};
++
++static struct platform_device mi424wr_uart_device = {
++	.name		= "serial8250",
++	.id		= PLAT8250_DEV_PLATFORM,
++	.dev.platform_data	= mi424wr_uart_platform_data,
++	.num_resources	= ARRAY_SIZE(mi424wr_uart_resources),
++	.resource	= mi424wr_uart_resources,
++};
++
++static struct flash_platform_data mi424wr_flash_data = {
++	.map_name	= "cfi_probe",
++	.width		= 2,
++};
++
++static struct resource mi424wr_flash_resource = {
++	.flags		= IORESOURCE_MEM,
++};
++
++static struct platform_device mi424wr_flash = {
++	.name		= "IXP4XX-Flash",
++	.id		= 0,
++	.dev.platform_data = &mi424wr_flash_data,
++	.num_resources	= 1,
++	.resource	= &mi424wr_flash_resource,
++};
++
++static int mi424wr_spi_boardinfo_setup(struct spi_board_info *bi,
++		struct spi_master *master, void *data)
++{
++
++	strlcpy(bi->modalias, "spi-ks8995", sizeof(bi->modalias));
++
++	bi->max_speed_hz = 5000000 /* Hz */;
++	bi->bus_num = master->bus_num;
++	bi->mode = SPI_MODE_0;
++
++	return 0;
++}
++
++static struct spi_gpio_platform_data mi424wr_spi_bus_data = {
++	.pin_cs			= MI424WR_KSSPI_SELECT,
++	.pin_clk		= MI424WR_KSSPI_CLOCK,
++	.pin_miso		= MI424WR_KSSPI_RXD,
++	.pin_mosi		= MI424WR_KSSPI_TXD,
++	.cs_activelow		= 1,
++	.no_spi_delay		= 1,
++	.boardinfo_setup	= mi424wr_spi_boardinfo_setup,
++};
++
++static struct gpio_led mi424wr_gpio_led[] = {
++	{
++		.name		= "moca-wan",	/* green led */
++		.gpio		= MI424WR_MOCA_WAN_LED,
++		.active_low	= 0,
++	}
++};
++
++static struct gpio_led_platform_data mi424wr_gpio_leds_data = {
++	.num_leds	= 1,
++	.leds		= mi424wr_gpio_led,
++};
++
++static struct platform_device mi424wr_gpio_leds = {
++	.name		= "leds-gpio",
++	.id		= -1,
++	.dev.platform_data = &mi424wr_gpio_leds_data,
++};
++
++static uint16_t latch_value = MI424WR_LATCH_DEFAULT;
++static uint16_t __iomem *iobase;
++
++static void mi424wr_latch_set_led(u8 bit, enum led_brightness value)
++{
++
++	if (((MI424WR_LATCH_MASK >> bit) & 1) ^ (value == LED_OFF))
++		latch_value &= ~(0x1 << bit);
++	else
++		latch_value |= (0x1 << bit);
++
++	__raw_writew(latch_value, iobase);
++
++}
++
++static struct latch_led mi424wr_latch_led[] = {
++	{
++		.name	= "power-alarm",
++		.bit	= MI424WR_LATCH_ALARM_LED,
++	},
++	{
++		.name	= "power-ok",
++		.bit	= MI424WR_LATCH_POWER_LED,
++	},
++	{
++		.name	= "wireless",	/* green led */
++		.bit	= MI424WR_LATCH_WIRELESS_LED,
++	},
++	{
++		.name	= "inet-down",	/* red led */
++		.bit	= MI424WR_LATCH_INET_DOWN_LED,
++	},
++	{
++		.name	= "inet-up",	/* green led */
++		.bit	= MI424WR_LATCH_INET_OK_LED,
++	},
++	{
++		.name	= "moca-lan",	/* green led */
++		.bit	= MI424WR_LATCH_MOCA_LAN_LED,
++	},
++	{
++		.name	= "wan-alarm",	/* red led */
++		.bit	= MI424WR_LATCH_WAN_ALARM_LED,
++	}
++};
++
++static struct latch_led_platform_data mi424wr_latch_leds_data = {
++	.num_leds	= ARRAY_SIZE(mi424wr_latch_led),
++	.mem		= 0x51000000,
++	.leds		= mi424wr_latch_led,
++	.set_led        = mi424wr_latch_set_led,
++};
++
++static struct platform_device mi424wr_latch_leds = {
++	.name		= "leds-latch",
++	.id		= -1,
++	.dev.platform_data = &mi424wr_latch_leds_data,
++};
++
++static struct platform_device mi424wr_spi_bus = {
++	.name		= "spi-gpio",
++	.id		= 0,
++	.dev.platform_data = &mi424wr_spi_bus_data,
++};
++
++static struct eth_plat_info mi424wr_wan_data = {
++	.phy		= 17,	/* KS8721 */
++	.rxq		= 3,
++	.txreadyq	= 20,
++};
++
++static struct eth_plat_info mi424wr_lan_data = {
++	.phy		= IXP4XX_ETH_PHY_MAX_ADDR,
++	.phy_mask	= 0x1e, /* ports 1-4 of the KS8995 switch */
++	.rxq		= 4,
++	.txreadyq	= 21,
++};
++
++static struct platform_device mi424wr_npe_devices[] = {
++	{
++		.name			= "ixp4xx_eth",
++		.id			= IXP4XX_ETH_NPEC,
++		.dev.platform_data	= &mi424wr_lan_data,
++		.dev.coherent_dma_mask	= DMA_BIT_MASK(32),
++	}, {
++		.name			= "ixp4xx_eth",
++		.id			= IXP4XX_ETH_NPEB,
++		.dev.platform_data	= &mi424wr_wan_data,
++		.dev.coherent_dma_mask	= DMA_BIT_MASK(32),
++	}
++};
++
++static struct eth_plat_info mi424wr_wanD_data = {
++	.phy		= 5,
++	.rxq		= 4,
++	.txreadyq	= 21,
++};
++
++static struct eth_plat_info mi424wr_lanD_data = {
++	.phy		= IXP4XX_ETH_PHY_MAX_ADDR,
++	.phy_mask	= 0x1e, /* ports 1-4 of the KS8995 switch */
++	.rxq		= 3,
++	.txreadyq	= 20,
++};
++
++static struct platform_device mi424wr_npeD_devices[] = {
++	{
++		.name                   = "ixp4xx_eth",
++		.id                     = IXP4XX_ETH_NPEB,
++		.dev.platform_data      = &mi424wr_lanD_data,
++		.dev.coherent_dma_mask	= DMA_BIT_MASK(32),
++	}, {
++		.name                   = "ixp4xx_eth",
++		.id                     = IXP4XX_ETH_NPEC,
++		.dev.platform_data      = &mi424wr_wanD_data,
++		.dev.coherent_dma_mask	= DMA_BIT_MASK(32),
++	}
++};
++
++static struct platform_device *mi424wr_devices[] __initdata = {
++	&mi424wr_uart_device,
++	&mi424wr_flash,
++	&mi424wr_gpio_leds,
++	&mi424wr_latch_leds,
++	&mi424wr_spi_bus,
++};
++
++static void __init mi424wr_init(void)
++{
++	ixp4xx_sys_init();
++
++	mi424wr_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
++	mi424wr_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + SZ_8M - 1;
++
++	*IXP4XX_EXP_CS0 |= IXP4XX_FLASH_WRITABLE;
++	*IXP4XX_EXP_CS1 = MI424WR_CS1_CONFIG;
++
++	/* configure button as input
++	 */
++	gpio_line_config(MI424WR_BUTTON_GPIO, IXP4XX_GPIO_IN);
++
++	/* Initialize LEDs and enables PCI bus.
++	 */
++	iobase = ioremap_nocache(IXP4XX_EXP_BUS_BASE(1), 0x1000);
++	__raw_writew(latch_value, iobase);
++
++	platform_add_devices(mi424wr_devices, ARRAY_SIZE(mi424wr_devices));
++
++	/* Need to figure out how to detect revD.
++	 * Look for a revision argument sent by redboot.
++	 */
++#define revD 4
++	if (system_rev == revD) {
++		platform_device_register(&mi424wr_npeD_devices[0]);
++		platform_device_register(&mi424wr_npeD_devices[1]);
++	} else {
++		platform_device_register(&mi424wr_npe_devices[0]);
++		platform_device_register(&mi424wr_npe_devices[1]);
++	}
++}
++
++
++MACHINE_START(MI424WR, "Actiontec MI424WR")
++	/* Maintainer: Jose Vasconcellos */
++	.map_io		= ixp4xx_map_io,
++	.init_irq	= ixp4xx_init_irq,
++	.init_time	= ixp4xx_timer_init,
++	.atag_offset	= 0x0100,
++	.init_machine	= mi424wr_init,
++#if defined(CONFIG_PCI)
++	.dma_zone_size	= SZ_64M,
++#endif
++	.restart	= ixp4xx_restart,
++MACHINE_END
++
diff --git a/target/linux/ixp4xx/patches-4.1/190-cambria_support.patch b/target/linux/ixp4xx/patches-4.1/190-cambria_support.patch
new file mode 100644
index 0000000..d6787f4
--- /dev/null
+++ b/target/linux/ixp4xx/patches-4.1/190-cambria_support.patch
@@ -0,0 +1,1131 @@
+--- a/arch/arm/mach-ixp4xx/Kconfig
++++ b/arch/arm/mach-ixp4xx/Kconfig
+@@ -21,6 +21,14 @@ config MACH_AVILA
+ 	  Avila Network Platform. For more information on this platform,
+ 	  see <file:Documentation/arm/IXP4xx>.
+ 
++config MACH_CAMBRIA
++	bool "Cambria"
++	select PCI
++	help
++	  Say 'Y' here if you want your kernel to support the Gateworks
++	  Cambria series. For more information on this platform,
++	  see <file:Documentation/arm/IXP4xx>.
++
+ config MACH_LOFT
+     bool "Loft"
+     depends on MACH_AVILA
+@@ -218,7 +226,7 @@ config CPU_IXP46X
+ 
+ config CPU_IXP43X
+ 	bool
+-	depends on MACH_KIXRP435
++	depends on MACH_KIXRP435 || MACH_CAMBRIA
+ 	default y
+ 
+ config MACH_GTWX5715
+--- a/arch/arm/mach-ixp4xx/Makefile
++++ b/arch/arm/mach-ixp4xx/Makefile
+@@ -7,6 +7,7 @@ obj-pci-n	:=
+ 
+ obj-pci-$(CONFIG_ARCH_IXDP4XX)		+= ixdp425-pci.o
+ obj-pci-$(CONFIG_MACH_AVILA)		+= avila-pci.o
++obj-pci-$(CONFIG_MACH_CAMBRIA)		+= cambria-pci.o
+ obj-pci-$(CONFIG_MACH_IXDPG425)		+= ixdpg425-pci.o
+ obj-pci-$(CONFIG_ARCH_ADI_COYOTE)	+= coyote-pci.o
+ obj-pci-$(CONFIG_MACH_GTWX5715)		+= gtwx5715-pci.o
+@@ -31,6 +32,7 @@ obj-y	+= common.o
+ 
+ obj-$(CONFIG_ARCH_IXDP4XX)	+= ixdp425-setup.o
+ obj-$(CONFIG_MACH_AVILA)	+= avila-setup.o
++obj-$(CONFIG_MACH_CAMBRIA)	+= cambria-setup.o
+ obj-$(CONFIG_MACH_IXDPG425)	+= coyote-setup.o
+ obj-$(CONFIG_ARCH_ADI_COYOTE)	+= coyote-setup.o
+ obj-$(CONFIG_MACH_GTWX5715)	+= gtwx5715-setup.o
+--- /dev/null
++++ b/arch/arm/mach-ixp4xx/cambria-pci.c
+@@ -0,0 +1,78 @@
++/*
++ * arch/arch/mach-ixp4xx/cambria-pci.c
++ *
++ * PCI setup routines for Gateworks Cambria series
++ *
++ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
++ *
++ * based on coyote-pci.c:
++ *	Copyright (C) 2002 Jungo Software Technologies.
++ *	Copyright (C) 2003 MontaVista Softwrae, Inc.
++ *
++ * Maintainer: Imre Kaloz <kaloz@openwrt.org>
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ *
++ */
++
++#include <linux/kernel.h>
++#include <linux/pci.h>
++#include <linux/init.h>
++#include <linux/irq.h>
++
++#include <asm/mach-types.h>
++#include <mach/hardware.h>
++#include <asm/irq.h>
++
++#include <asm/mach/pci.h>
++
++extern void ixp4xx_pci_preinit(void);
++extern int ixp4xx_setup(int nr, struct pci_sys_data *sys);
++extern struct pci_bus *ixp4xx_scan_bus(int nr, struct pci_sys_data *sys);
++
++void __init cambria_pci_preinit(void)
++{
++	irq_set_irq_type(IRQ_IXP4XX_GPIO11, IRQ_TYPE_LEVEL_LOW);
++	irq_set_irq_type(IRQ_IXP4XX_GPIO10, IRQ_TYPE_LEVEL_LOW);
++	irq_set_irq_type(IRQ_IXP4XX_GPIO9, IRQ_TYPE_LEVEL_LOW);
++	irq_set_irq_type(IRQ_IXP4XX_GPIO8, IRQ_TYPE_LEVEL_LOW);
++
++	ixp4xx_pci_preinit();
++}
++
++static int __init cambria_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
++{
++	if (slot == 1)
++		return IRQ_IXP4XX_GPIO11;
++	else if (slot == 2)
++		return IRQ_IXP4XX_GPIO10;
++	else if (slot == 3)
++		return IRQ_IXP4XX_GPIO9;
++	else if (slot == 4)
++		return IRQ_IXP4XX_GPIO8;
++	else if (slot == 6)
++		return IRQ_IXP4XX_GPIO10;
++	else if (slot == 15)
++		return IRQ_IXP4XX_GPIO8;
++
++	else return -1;
++}
++
++struct hw_pci cambria_pci __initdata = {
++	.nr_controllers = 1,
++	.preinit =        cambria_pci_preinit,
++	.ops =            &ixp4xx_ops,
++	.setup =          ixp4xx_setup,
++	.map_irq =        cambria_map_irq,
++};
++
++int __init cambria_pci_init(void)
++{
++	if (machine_is_cambria())
++		pci_common_init(&cambria_pci);
++	return 0;
++}
++
++subsys_initcall(cambria_pci_init);
+--- /dev/null
++++ b/arch/arm/mach-ixp4xx/cambria-setup.c
+@@ -0,0 +1,1003 @@
++/*
++ * arch/arm/mach-ixp4xx/cambria-setup.c
++ *
++ * Board setup for the Gateworks Cambria series
++ *
++ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
++ * Copyright (C) 2012 Gateworks Corporation <support@gateworks.com>
++ *
++ * based on coyote-setup.c:
++ *      Copyright (C) 2003-2005 MontaVista Software, Inc.
++ *
++ * Author: Imre Kaloz <kaloz@openwrt.org>
++ *         Tim Harvey <tharvey@gateworks.com>
++ */
++
++#include <linux/device.h>
++#include <linux/gpio_keys.h>
++#include <linux/gpio.h>
++#include <linux/i2c.h>
++#include <linux/i2c-gpio.h>
++#include <linux/platform_data/at24.h>
++#include <linux/i2c/gw_i2c_pld.h>
++#include <linux/platform_data/pca953x.h>
++#include <linux/if_ether.h>
++#include <linux/init.h>
++#include <linux/input.h>
++#include <linux/kernel.h>
++#include <linux/leds.h>
++#include <linux/memory.h>
++#include <linux/netdevice.h>
++#include <linux/serial.h>
++#include <linux/serial_8250.h>
++#include <linux/slab.h>
++#include <linux/socket.h>
++#include <linux/types.h>
++#include <linux/tty.h>
++#include <linux/irq.h>
++#include <linux/usb/ehci_pdriver.h>
++
++#include <mach/hardware.h>
++#include <asm/irq.h>
++#include <asm/mach-types.h>
++#include <asm/mach/arch.h>
++#include <asm/mach/flash.h>
++#include <asm/setup.h>
++
++#define ARRAY_AND_SIZE(x)       (x), ARRAY_SIZE(x)
++
++struct cambria_board_info {
++	unsigned char	*model;
++	void		(*setup)(void);
++};
++
++static struct cambria_board_info *cambria_info __initdata;
++
++static struct flash_platform_data cambria_flash_data = {
++	.map_name	= "cfi_probe",
++	.width		= 2,
++};
++
++static struct resource cambria_flash_resource = {
++	.flags		= IORESOURCE_MEM,
++};
++
++static struct platform_device cambria_flash = {
++	.name		= "IXP4XX-Flash",
++	.id		= 0,
++	.dev		= {
++		.platform_data = &cambria_flash_data,
++	},
++	.num_resources	= 1,
++	.resource	= &cambria_flash_resource,
++};
++
++static struct i2c_gpio_platform_data cambria_i2c_gpio_data = {
++	.sda_pin	= 7,
++	.scl_pin	= 6,
++};
++
++static struct platform_device cambria_i2c_gpio = {
++	.name		= "i2c-gpio",
++	.id		= 0,
++	.dev = {
++		.platform_data	= &cambria_i2c_gpio_data,
++	},
++};
++
++#ifdef SFP_SERIALID
++static struct i2c_gpio_platform_data cambria_i2c_gpio_sfpa_data = {
++	.sda_pin	= 113,
++	.scl_pin	= 112,
++	.sda_is_open_drain = 0,
++	.scl_is_open_drain = 0,
++};
++
++static struct platform_device cambria_i2c_gpio_sfpa = {
++	.name		= "i2c-gpio",
++	.id		= 1,
++	.dev = {
++		.platform_data	= &cambria_i2c_gpio_sfpa_data,
++	},
++};
++
++static struct i2c_gpio_platform_data cambria_i2c_gpio_sfpb_data = {
++	.sda_pin	= 115,
++	.scl_pin	= 114,
++	.sda_is_open_drain = 0,
++	.scl_is_open_drain = 0,
++};
++
++static struct platform_device cambria_i2c_gpio_sfpb = {
++	.name		= "i2c-gpio",
++	.id		= 2,
++	.dev = {
++		.platform_data	= &cambria_i2c_gpio_sfpb_data,
++	},
++};
++#endif // #ifdef SFP_SERIALID
++
++static struct eth_plat_info cambria_npec_data = {
++	.phy		= 1,
++	.rxq		= 4,
++	.txreadyq	= 21,
++};
++
++static struct eth_plat_info cambria_npea_data = {
++	.phy		= 2,
++	.rxq		= 2,
++	.txreadyq	= 19,
++};
++
++static struct platform_device cambria_npec_device = {
++	.name			= "ixp4xx_eth",
++	.id			= IXP4XX_ETH_NPEC,
++	.dev.platform_data	= &cambria_npec_data,
++	.dev.coherent_dma_mask	= DMA_BIT_MASK(32),
++};
++
++static struct platform_device cambria_npea_device = {
++	.name			= "ixp4xx_eth",
++	.id			= IXP4XX_ETH_NPEA,
++	.dev.platform_data	= &cambria_npea_data,
++	.dev.coherent_dma_mask	= DMA_BIT_MASK(32),
++};
++
++static struct resource cambria_uart_resource = {
++	.start	= IXP4XX_UART1_BASE_PHYS,
++	.end	= IXP4XX_UART1_BASE_PHYS + 0x0fff,
++	.flags	= IORESOURCE_MEM,
++};
++
++static struct plat_serial8250_port cambria_uart_data[] = {
++	{
++		.mapbase	= IXP4XX_UART1_BASE_PHYS,
++		.membase	= (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET,
++		.irq		= IRQ_IXP4XX_UART1,
++		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
++		.iotype		= UPIO_MEM,
++		.regshift	= 2,
++		.uartclk	= IXP4XX_UART_XTAL,
++	},
++	{ },
++};
++
++static struct platform_device cambria_uart = {
++	.name		= "serial8250",
++	.id		= PLAT8250_DEV_PLATFORM,
++	.dev = {
++		.platform_data	= cambria_uart_data,
++	},
++	.num_resources	= 1,
++	.resource	= &cambria_uart_resource,
++};
++
++static struct resource cambria_optional_uart_resources[] = {
++	{
++		.start	= 0x52000000,
++		.end	= 0x52000fff,
++		.flags	= IORESOURCE_MEM
++	},
++	{
++		.start	= 0x53000000,
++		.end	= 0x53000fff,
++		.flags	= IORESOURCE_MEM
++	},
++	{
++		.start	= 0x52000000,
++		.end	= 0x52000fff,
++		.flags	= IORESOURCE_MEM
++	},
++	{
++		.start	= 0x52000000,
++		.end	= 0x52000fff,
++		.flags	= IORESOURCE_MEM
++	},
++	{
++		.start	= 0x52000000,
++		.end	= 0x52000fff,
++		.flags	= IORESOURCE_MEM
++	},
++	{
++		.start	= 0x52000000,
++		.end	= 0x52000fff,
++		.flags	= IORESOURCE_MEM
++	},
++	{
++		.start	= 0x52000000,
++		.end	= 0x52000fff,
++		.flags	= IORESOURCE_MEM
++	},
++	{
++		.start	= 0x53000000,
++		.end	= 0x53000fff,
++		.flags	= IORESOURCE_MEM
++	}
++};
++
++static struct plat_serial8250_port cambria_optional_uart_data[] = {
++	{
++		.flags		= UPF_BOOT_AUTOCONF,
++		.iotype		= UPIO_MEM_DELAY,
++		.regshift	= 0,
++		.uartclk	= 1843200,
++		.rw_delay	= 10,
++	},
++	{
++		.flags		= UPF_BOOT_AUTOCONF,
++		.iotype		= UPIO_MEM_DELAY,
++		.regshift	= 0,
++		.uartclk	= 1843200,
++		.rw_delay	= 10,
++	},
++	{
++		.flags		= UPF_BOOT_AUTOCONF,
++		.iotype		= UPIO_MEM,
++		.regshift	= 0,
++		.uartclk	= 18432000,
++	},
++	{
++		.flags		= UPF_BOOT_AUTOCONF,
++		.iotype		= UPIO_MEM,
++		.regshift	= 0,
++		.uartclk	= 18432000,
++	},
++	{
++		.flags		= UPF_BOOT_AUTOCONF,
++		.iotype		= UPIO_MEM,
++		.regshift	= 0,
++		.uartclk	= 18432000,
++	},
++	{
++		.flags		= UPF_BOOT_AUTOCONF,
++		.iotype		= UPIO_MEM,
++		.regshift	= 0,
++		.uartclk	= 18432000,
++	},
++	{
++		.flags		= UPF_BOOT_AUTOCONF,
++		.iotype		= UPIO_MEM,
++		.regshift	= 0,
++		.uartclk	= 18432000,
++	},
++  { },
++};
++
++static struct platform_device cambria_optional_uart = {
++	.name		= "serial8250",
++	.id		= PLAT8250_DEV_PLATFORM1,
++	.dev.platform_data	= cambria_optional_uart_data,
++	.num_resources	= 2,
++	.resource	= cambria_optional_uart_resources,
++};
++
++static struct resource cambria_pata_resources[] = {
++	{
++		.flags	= IORESOURCE_MEM
++	},
++	{
++		.flags	= IORESOURCE_MEM,
++	},
++	{
++		.name	= "intrq",
++		.start	= IRQ_IXP4XX_GPIO12,
++		.end	= IRQ_IXP4XX_GPIO12,
++		.flags	= IORESOURCE_IRQ,
++	},
++};
++
++static struct ixp4xx_pata_data cambria_pata_data = {
++	.cs0_bits	= 0xbfff3c03,
++	.cs1_bits	= 0xbfff3c03,
++};
++
++static struct platform_device cambria_pata = {
++	.name			= "pata_ixp4xx_cf",
++	.id			= 0,
++	.dev.platform_data      = &cambria_pata_data,
++	.num_resources		= ARRAY_SIZE(cambria_pata_resources),
++	.resource		= cambria_pata_resources,
++};
++
++static struct gpio_led cambria_gpio_leds[] = {
++	{
++		.name		= "user",
++		.gpio		= 5,
++		.active_low 	= 1,
++	},
++	{
++		.name		= "user2",
++		.gpio		= 0,
++		.active_low 	= 1,
++	},
++	{
++		.name		= "user3",
++		.gpio		= 0,
++		.active_low 	= 1,
++	},
++	{
++		.name		= "user4",
++		.gpio		= 0,
++		.active_low 	= 1,
++	}
++};
++
++static struct gpio_led_platform_data cambria_gpio_leds_data = {
++	.num_leds	= 1,
++	.leds		= cambria_gpio_leds,
++};
++
++static struct platform_device cambria_gpio_leds_device = {
++	.name		= "leds-gpio",
++	.id		= -1,
++	.dev.platform_data = &cambria_gpio_leds_data,
++};
++
++static struct resource cambria_gpio_resources[] = {
++	{
++		.name = "gpio",
++		.flags  = 0,
++	},
++};
++
++static struct gpio cambria_gpios_gw2350[] = {
++	// ARM GPIO
++#if 0 // configured from bootloader
++	{  0, GPIOF_IN,            "ARM_DIO0" },
++	{  1, GPIOF_IN,            "ARM_DIO1" },
++	{  2, GPIOF_IN,            "ARM_DIO2" },
++	{  3, GPIOF_IN,            "ARM_DIO3" },
++	{  4, GPIOF_IN,            "ARM_DIO4" },
++	{  5, GPIOF_IN,            "ARM_DIO5" },
++	{ 12, GPIOF_OUT_INIT_HIGH, "WDOGEN#" },
++#endif
++	{  8, GPIOF_IN,            "ARM_DIO8" },
++	{  9, GPIOF_IN,            "ARM_DIO9" },
++};
++
++static struct gpio cambria_gpios_gw2358[] = {
++	// ARM GPIO
++#if 0 // configured from bootloader
++	{  0, GPIOF_IN,            "*VINLOW#" },
++	{  2, GPIOF_IN,            "*GPS_PPS" },
++	{  3, GPIOF_IN,            "*GPS_IRQ#" },
++	{  4, GPIOF_IN,            "*RS485_IRQ#" },
++	{  5, GPIOF_IN,            "*SER_EN#" },
++	{ 14, GPIOF_OUT_INIT_HIGH, "*WDOGEN#" },
++#endif
++};
++
++static struct gpio cambria_gpios_gw2359[] = {
++	// ARM GPIO
++#if 0 // configured from bootloader
++	{  0, GPIOF_IN,            "*PCA_IRQ#" },
++	{  1, GPIOF_IN,            "ARM_DIO1" },
++	{  2, GPIOF_IN,            "ARM_DIO2" },
++	{  3, GPIOF_IN,            "ARM_DIO3" },
++	{  4, GPIOF_IN,            "ARM_DIO4" },
++	{  5, GPIOF_IN,            "ARM_DIO5" },
++	{  8, GPIOF_OUT_INIT_HIGH, "*WDOGEN#" },
++#endif
++	{ 11, GPIOF_OUT_INIT_HIGH, "*SER_EN"   },       // console serial enable
++	{ 12, GPIOF_IN,            "*GSC_IRQ#" },
++	{ 13, GPIOF_OUT_INIT_HIGH, "*PCIE_RST#"},
++	// GSC GPIO
++#if !(IS_ENABLED(CONFIG_KEYBOARD_GPIO_POLLED))
++	{100, GPIOF_IN,            "*USER_PB#" },
++#endif
++	{103, GPIOF_OUT_INIT_HIGH, "*5V_EN" },         // 5V aux supply enable
++	{108, GPIOF_IN,            "*SMUXDA0" },
++	{109, GPIOF_IN,            "*SMUXDA1" },
++	{110, GPIOF_IN,            "*SMUXDA2" },
++	{111, GPIOF_IN,            "*SMUXDB0" },
++	{112, GPIOF_IN,            "*SMUXDB1" },
++	{113, GPIOF_IN,            "*SMUXDB2" },
++	// PCA GPIO
++	{118, GPIOF_IN,            "*USIM2_DET#"},     // USIM2 Detect
++	{120, GPIOF_OUT_INIT_LOW,  "*USB1_PCI_SEL"},   // USB1  Select (1=PCI, 0=FP)
++	{121, GPIOF_OUT_INIT_LOW,  "*USB2_PCI_SEL"},   // USB2  Select (1=PCI, 0=FP)
++	{122, GPIOF_IN,            "*USIM1_DET#"},     // USIM1 Detect
++	{123, GPIOF_OUT_INIT_HIGH, "*COM1_DTR#" },     // J21/J10
++	{124, GPIOF_IN,            "*COM1_DSR#" },     // J21/J10
++	{127, GPIOF_IN,            "PCA_DIO0" },
++	{128, GPIOF_IN,            "PCA_DIO1" },
++	{129, GPIOF_IN,            "PCA_DIO2" },
++	{130, GPIOF_IN,            "PCA_DIO3" },
++	{131, GPIOF_IN,            "PCA_DIO4" },
++};
++
++static struct gpio cambria_gpios_gw2360[] = {
++	// ARM GPIO
++	{  0, GPIOF_IN,            "*PCA_IRQ#" },
++	{ 11, GPIOF_OUT_INIT_LOW, "*SER0_EN#" },
++	{ 12, GPIOF_IN,            "*GSC_IRQ#" },
++	{ 13, GPIOF_OUT_INIT_HIGH, "*PCIE_RST#"},
++	// GSC GPIO
++#if !(IS_ENABLED(CONFIG_KEYBOARD_GPIO_POLLED))
++	{100, GPIOF_IN,            "*USER_PB#" },
++#endif
++	{108, GPIOF_OUT_INIT_LOW,  "*ENET1_EN#" },     // ENET1 TX Enable
++	{109, GPIOF_IN,            "*ENET1_PRES#" },   // ENET1 Detect (0=SFP present)
++	{110, GPIOF_OUT_INIT_LOW,  "*ENET2_EN#" },     // ENET2 TX Enable
++	{111, GPIOF_IN,            "*ENET2_PRES#"},    // ENET2 Detect (0=SFP present)
++	// PCA GPIO
++	{116, GPIOF_OUT_INIT_HIGH, "*USIM2_LOC"},      // USIM2 Select (1=Loc, 0=Rem)
++	{117, GPIOF_IN,            "*USIM2_DET_LOC#" },// USIM2 Detect (Local Slot)
++	{118, GPIOF_IN,            "*USIM2_DET_REM#" },// USIM2 Detect (Remote Slot)
++	{120, GPIOF_OUT_INIT_LOW,  "*USB1_PCI_SEL"},   // USB1  Select (1=PCIe1, 0=J1)
++	{121, GPIOF_OUT_INIT_LOW,  "*USB2_PCI_SEL"},   // USB2  Select (1=PCIe2, 0=J1)
++	{122, GPIOF_IN,            "*USIM1_DET#"},     // USIM1 Detect
++	{127, GPIOF_IN,            "DIO0" },
++	{128, GPIOF_IN,            "DIO1" },
++	{129, GPIOF_IN,            "DIO2" },
++	{130, GPIOF_IN,            "DIO3" },
++	{131, GPIOF_IN,            "DIO4" },
++};
++
++static struct latch_led cambria_latch_leds[] = {
++	{
++		.name	= "ledA",  /* green led */
++		.bit	= 0,
++	},
++	{
++		.name	= "ledB",  /* green led */
++		.bit	= 1,
++	},
++	{
++		.name	= "ledC",  /* green led */
++		.bit	= 2,
++	},
++	{
++		.name	= "ledD",  /* green led */
++		.bit	= 3,
++	},
++	{
++		.name	= "ledE",  /* green led */
++		.bit	= 4,
++	},
++	{
++		.name	= "ledF",  /* green led */
++		.bit	= 5,
++	},
++	{
++		.name	= "ledG",  /* green led */
++		.bit	= 6,
++	},
++	{
++		.name	= "ledH",  /* green led */
++		.bit	= 7,
++	}
++};
++
++static struct latch_led_platform_data cambria_latch_leds_data = {
++	.num_leds	= 8,
++	.leds		= cambria_latch_leds,
++	.mem		= 0x53F40000,
++};
++
++static struct platform_device cambria_latch_leds_device = {
++	.name		= "leds-latch",
++	.id		= -1,
++	.dev.platform_data = &cambria_latch_leds_data,
++};
++
++static struct resource cambria_usb0_resources[] = {
++	{
++		.start	= 0xCD000000,
++		.end	= 0xCD000300,
++		.flags	= IORESOURCE_MEM,
++	},
++	{
++		.start	= 32,
++		.flags	= IORESOURCE_IRQ,
++	},
++};
++
++static struct resource cambria_usb1_resources[] = {
++	{
++		.start	= 0xCE000000,
++		.end	= 0xCE000300,
++		.flags	= IORESOURCE_MEM,
++	},
++	{
++		.start	= 33,
++		.flags	= IORESOURCE_IRQ,
++	},
++};
++
++static u64 ehci_dma_mask = ~(u32)0;
++
++static struct usb_ehci_pdata cambria_usb_pdata = {
++	.big_endian_desc = 1,
++	.big_endian_mmio = 1,
++	.has_tt = 1,
++	.caps_offset = 0x100,
++};
++
++static struct platform_device cambria_usb0_device =  {
++	.name		= "ehci-platform",
++	.id		= 0,
++	.resource	= cambria_usb0_resources,
++	.num_resources	= ARRAY_SIZE(cambria_usb0_resources),
++	.dev = {
++		.dma_mask		= &ehci_dma_mask,
++		.coherent_dma_mask	= 0xffffffff,
++		.platform_data = &cambria_usb_pdata,
++	},
++};
++
++static struct platform_device cambria_usb1_device = {
++	.name		= "ehci-platform",
++	.id		= 1,
++	.resource	= cambria_usb1_resources,
++	.num_resources	= ARRAY_SIZE(cambria_usb1_resources),
++	.dev = {
++		.dma_mask		= &ehci_dma_mask,
++		.coherent_dma_mask	= 0xffffffff,
++		.platform_data = &cambria_usb_pdata,
++	},
++};
++
++static struct gw_i2c_pld_platform_data gw_i2c_pld_data0 = {
++	.gpio_base	= 16,
++	.nr_gpio	= 8,
++};
++
++static struct gw_i2c_pld_platform_data gw_i2c_pld_data1 = {
++	.gpio_base	= 24,
++	.nr_gpio	= 2,
++};
++
++
++static struct gpio_keys_button cambria_gpio_buttons[] = {
++	{
++		.desc		= "user",
++		.type		= EV_KEY,
++		.code		= BTN_0,
++		.debounce_interval = 6,
++		.gpio		= 25,
++	}
++};
++
++static struct gpio_keys_platform_data cambria_gpio_buttons_data = {
++	.poll_interval	= 500,
++	.nbuttons	= 1,
++	.buttons	= cambria_gpio_buttons,
++};
++
++static struct platform_device cambria_gpio_buttons_device = {
++	.name			= "gpio-keys-polled",
++	.id			= -1,
++	.dev.platform_data	= &cambria_gpio_buttons_data,
++};
++
++static struct platform_device *cambria_devices[] __initdata = {
++	&cambria_i2c_gpio,
++	&cambria_flash,
++	&cambria_uart,
++};
++
++static int cambria_register_gpio(struct gpio *array, size_t num)
++{
++	int i, err, ret;
++
++	ret = 0;
++	for (i = 0; i < num; i++, array++) {
++		const char *label = array->label;
++		if (label[0] == '*')
++			label++;
++		err = gpio_request_one(array->gpio, array->flags, label);
++		if (err)
++			ret = err;
++		else {
++			err = gpio_export(array->gpio, array->label[0] != '*');
++		}
++	}
++	return ret;
++}
++
++static void __init cambria_gw23xx_setup(void)
++{
++	cambria_gpio_resources[0].start = (1 << 0) | (1 << 1) | (1 << 2) | (1 << 3) | (1 << 4) |\
++																		(1 << 5) | (1 << 8) | (1 << 9) | (1 << 12);
++	cambria_gpio_resources[0].end = cambria_gpio_resources[0].start;
++
++	platform_device_register(&cambria_npec_device);
++	platform_device_register(&cambria_npea_device);
++}
++
++static void __init cambria_gw2350_setup(void)
++{
++	*IXP4XX_EXP_CS2 = 0xBFFF3C43;
++	irq_set_irq_type(IRQ_IXP4XX_GPIO3, IRQ_TYPE_EDGE_RISING);
++	cambria_optional_uart_data[0].mapbase	= 0x52FF0000;
++	cambria_optional_uart_data[0].membase	= (void __iomem *)ioremap(0x52FF0000, 0x0fff);
++	cambria_optional_uart_data[0].irq		= IRQ_IXP4XX_GPIO3;
++
++	*IXP4XX_EXP_CS3 = 0xBFFF3C43;
++	irq_set_irq_type(IRQ_IXP4XX_GPIO4, IRQ_TYPE_EDGE_RISING);
++	cambria_optional_uart_data[1].mapbase	= 0x53FF0000;
++	cambria_optional_uart_data[1].membase	= (void __iomem *)ioremap(0x53FF0000, 0x0fff);
++	cambria_optional_uart_data[1].irq		= IRQ_IXP4XX_GPIO4;
++
++	cambria_gpio_resources[0].start = (1 << 0) | (1 << 1) | (1 << 2) | (1 << 3) | (1 << 4) |\
++																		(1 << 5) | (1 << 8) | (1 << 9) | (1 << 12);
++	cambria_gpio_resources[0].end = cambria_gpio_resources[0].start;
++
++	platform_device_register(&cambria_optional_uart);
++	platform_device_register(&cambria_npec_device);
++	platform_device_register(&cambria_npea_device);
++
++	platform_device_register(&cambria_usb0_device);
++	platform_device_register(&cambria_usb1_device);
++
++	platform_device_register(&cambria_gpio_leds_device);
++
++	/* gpio config (/sys/class/gpio) */
++	cambria_register_gpio(ARRAY_AND_SIZE(cambria_gpios_gw2350));
++}
++
++static void __init cambria_gw2358_setup(void)
++{
++	*IXP4XX_EXP_CS3 = 0xBFFF3C43; // bit0 = 16bit vs 8bit bus
++	irq_set_irq_type(IRQ_IXP4XX_GPIO3, IRQ_TYPE_EDGE_RISING);
++	cambria_optional_uart_data[0].mapbase	= 0x53FC0000;
++	cambria_optional_uart_data[0].membase	= (void __iomem *)ioremap(0x53FC0000, 0x0fff);
++	cambria_optional_uart_data[0].irq		= IRQ_IXP4XX_GPIO3;
++
++	irq_set_irq_type(IRQ_IXP4XX_GPIO4, IRQ_TYPE_EDGE_RISING);
++	cambria_optional_uart_data[1].mapbase	= 0x53F80000;
++	cambria_optional_uart_data[1].membase	= (void __iomem *)ioremap(0x53F80000, 0x0fff);
++	cambria_optional_uart_data[1].irq		= IRQ_IXP4XX_GPIO4;
++
++	cambria_gpio_resources[0].start = (1 << 14) | (1 << 16) | (1 << 17) | (1 << 18) |\
++																		(1 << 19) | (1 << 20) | (1 << 24) | (1 << 25);
++	cambria_gpio_resources[0].end = cambria_gpio_resources[0].start;
++
++	platform_device_register(&cambria_optional_uart);
++
++	platform_device_register(&cambria_npec_device);
++	platform_device_register(&cambria_npea_device);
++
++	platform_device_register(&cambria_usb0_device);
++	platform_device_register(&cambria_usb1_device);
++
++	platform_device_register(&cambria_pata);
++
++	cambria_gpio_leds[0].gpio = 24;
++	platform_device_register(&cambria_gpio_leds_device);
++
++	platform_device_register(&cambria_latch_leds_device);
++
++	platform_device_register(&cambria_gpio_buttons_device);
++
++	/* gpio config (/sys/class/gpio) */
++	cambria_register_gpio(ARRAY_AND_SIZE(cambria_gpios_gw2358));
++}
++
++static void __init cambria_gw2359_setup(void)
++{
++#if defined(CONFIG_MVSWITCH_PHY) || defined(CONFIG_MVSWITCH_PHY_MODULE)
++	/* The mvswitch driver has some hard-coded values which could
++	 * easily be turned into a platform resource if needed.  For now they
++	 * match our hardware configuration:
++	 *  MV_BASE    0x10 - phy base address
++	 *  MV_WANPORT 0 - Port0 (ENET2) is WAN (SFP module)
++	 *  MV_CPUPORT 5 - Port5 is CPU NPEA (eth1)
++	 *
++	 * The mvswitch driver registers a fixup which forces a driver match
++	 * if phy_addr matches MV_BASE
++	 *
++	 * Two static defautl VLAN's are created: WAN port in 1, and all other ports
++	 * in the other.
++	 */
++	cambria_npea_data.phy = 0x10; // mvswitch driver catches this
++#else
++	// Switch Port5 to CPU is MII<->MII (no PHY) - this disables the genphy driver
++	cambria_npea_data.phy = IXP4XX_ETH_PHY_MAX_ADDR;
++	// CPU NPE-C is in bridge bypass mode to Port4 PHY@0x14
++	cambria_npec_data.phy = 0x14;
++#endif
++	platform_device_register(&cambria_npec_device);
++	platform_device_register(&cambria_npea_device);
++
++	platform_device_register(&cambria_usb0_device);
++	platform_device_register(&cambria_usb1_device);
++
++	cambria_gpio_leds_data.num_leds = 3;
++	cambria_gpio_leds[0].name = "user1";
++	cambria_gpio_leds[0].gpio = 125; // PNLLED1#
++	cambria_gpio_leds[1].gpio = 126; // PNLLED3#
++	cambria_gpio_leds[2].gpio = 119; // PNLLED4#
++	platform_device_register(&cambria_gpio_leds_device);
++
++#if (IS_ENABLED(CONFIG_KEYBOARD_GPIO_POLLED))
++	cambria_gpio_buttons[0].gpio = 100;
++	platform_device_register(&cambria_gpio_buttons_device);
++#endif
++
++	/* gpio config (/sys/class/gpio) */
++	cambria_register_gpio(ARRAY_AND_SIZE(cambria_gpios_gw2359));
++}
++
++static void __init cambria_gw2360_setup(void)
++{
++	/* The GW2360 has 8 UARTs in addition to the 1 IXP4xxx UART.
++	 * The chip-selects are expanded via a 3-to-8 decoder and CS2
++	 * and they are 8bit devices
++	 */
++	*IXP4XX_EXP_CS2 = 0xBFFF3C43;
++	cambria_optional_uart_data[0].mapbase = 0x52000000;
++	cambria_optional_uart_data[0].membase = (void __iomem *)ioremap(0x52000000, 0x0fff);
++	cambria_optional_uart_data[0].uartclk = 18432000;
++	cambria_optional_uart_data[0].iotype  = UPIO_MEM;
++	cambria_optional_uart_data[0].irq     = IRQ_IXP4XX_GPIO2;
++	irq_set_irq_type(IRQ_IXP4XX_GPIO2, IRQ_TYPE_EDGE_RISING);
++
++	cambria_optional_uart_data[1].mapbase = 0x52000008;
++	cambria_optional_uart_data[1].membase = (void __iomem *)ioremap(0x52000008, 0x0fff);
++	cambria_optional_uart_data[1].uartclk = 18432000;
++	cambria_optional_uart_data[1].iotype  = UPIO_MEM;
++	cambria_optional_uart_data[1].irq     = IRQ_IXP4XX_GPIO3;
++	irq_set_irq_type(IRQ_IXP4XX_GPIO3, IRQ_TYPE_EDGE_RISING);
++
++	cambria_optional_uart_data[2].mapbase = 0x52000010;
++	cambria_optional_uart_data[2].membase = (void __iomem *)ioremap(0x52000010, 0x0fff);
++	cambria_optional_uart_data[2].uartclk = 18432000;
++	cambria_optional_uart_data[2].iotype  = UPIO_MEM;
++	cambria_optional_uart_data[2].irq     = IRQ_IXP4XX_GPIO4;
++	irq_set_irq_type(IRQ_IXP4XX_GPIO4, IRQ_TYPE_EDGE_RISING);
++
++	cambria_optional_uart_data[3].mapbase = 0x52000018;
++	cambria_optional_uart_data[3].membase = (void __iomem *)ioremap(0x52000018, 0x0fff);
++	cambria_optional_uart_data[3].uartclk = 18432000;
++	cambria_optional_uart_data[3].iotype  = UPIO_MEM;
++	cambria_optional_uart_data[3].irq     = IRQ_IXP4XX_GPIO5;
++	irq_set_irq_type(IRQ_IXP4XX_GPIO5, IRQ_TYPE_EDGE_RISING);
++
++	cambria_optional_uart_data[4].mapbase = 0x52000020;
++	cambria_optional_uart_data[4].membase = (void __iomem *)ioremap(0x52000020, 0x0fff);
++	cambria_optional_uart_data[4].uartclk = 18432000;
++	cambria_optional_uart_data[4].iotype  = UPIO_MEM;
++	cambria_optional_uart_data[4].irq     = IRQ_IXP4XX_GPIO8;
++	irq_set_irq_type(IRQ_IXP4XX_GPIO8, IRQ_TYPE_EDGE_RISING);
++
++	cambria_optional_uart_data[5].mapbase = 0x52000028;
++	cambria_optional_uart_data[5].membase = (void __iomem *)ioremap(0x52000028, 0x0fff);
++	cambria_optional_uart_data[5].uartclk = 18432000;
++	cambria_optional_uart_data[5].iotype  = UPIO_MEM;
++	cambria_optional_uart_data[5].irq     = IRQ_IXP4XX_GPIO9;
++	irq_set_irq_type(IRQ_IXP4XX_GPIO9, IRQ_TYPE_EDGE_RISING);
++
++	cambria_optional_uart_data[6].mapbase = 0x52000030;
++	cambria_optional_uart_data[6].membase = (void __iomem *)ioremap(0x52000030, 0x0fff);
++	cambria_optional_uart_data[6].uartclk = 18432000;
++	cambria_optional_uart_data[6].iotype  = UPIO_MEM;
++	cambria_optional_uart_data[6].irq     = IRQ_IXP4XX_GPIO10;
++	irq_set_irq_type(IRQ_IXP4XX_GPIO10, IRQ_TYPE_EDGE_RISING);
++
++	cambria_optional_uart.num_resources   = 7,
++	platform_device_register(&cambria_optional_uart);
++
++#if defined(CONFIG_MVSWITCH_PHY) || defined(CONFIG_MVSWITCH_PHY_MODULE)
++	/* The mvswitch driver has some hard-coded values which could
++	 * easily be turned into a platform resource if needed.  For now they
++	 * match our hardware configuration:
++	 *  MV_BASE    0x10 - phy base address
++	 *  MV_WANPORT 0 - Port0 (ENET2) is WAN (SFP module)
++	 *  MV_CPUPORT 5 - Port5 is CPU NPEA (eth1)
++	 *
++	 * The mvswitch driver registers a fixup which forces a driver match
++	 * if phy_addr matches MV_BASE
++	 *
++	 * Two static defautl VLAN's are created: WAN port in 1, and all other ports
++	 * in the other.
++	 */
++	cambria_npea_data.phy = 0x10; // mvswitch driver catches this
++#else
++	// Switch Port5 to CPU is MII<->MII (no PHY) - this disables the generic PHY driver
++	cambria_npea_data.phy = IXP4XX_ETH_PHY_MAX_ADDR;
++#endif
++
++	// disable genphy autonegotiation on NPE-C PHY (eth1) as its 100BaseFX
++	//cambria_npec_data.noautoneg = 1;   // disable autoneg
++	cambria_npec_data.speed_10 = 0;    // 100mbps
++	cambria_npec_data.half_duplex = 0; // full-duplex
++	platform_device_register(&cambria_npec_device);
++	platform_device_register(&cambria_npea_device);
++
++	platform_device_register(&cambria_usb0_device);
++	platform_device_register(&cambria_usb1_device);
++
++	cambria_gpio_leds_data.num_leds = 3;
++	cambria_gpio_leds[0].name = "user1";
++	cambria_gpio_leds[0].gpio = 125;
++	cambria_gpio_leds[1].gpio = 126;
++	cambria_gpio_leds[2].gpio = 119;
++	platform_device_register(&cambria_gpio_leds_device);
++
++#if (IS_ENABLED(CONFIG_KEYBOARD_GPIO_POLLED))
++	cambria_gpio_buttons[0].gpio = 100;
++	platform_device_register(&cambria_gpio_buttons_device);
++#endif
++
++#ifdef SFP_SERIALID
++	/* the SFP modules each have an i2c bus for serial ident via GSC GPIO
++	 * To use these the i2c-gpio driver must be changed to use the _cansleep
++	 * varients of gpio_get_value/gpio_set_value (I don't know why it doesn't
++	 * use that anyway as it doesn't operate in an IRQ context).
++	 * Additionally the i2c-gpio module must set the gpio to output-high prior
++	 * to changing direction to an input to enable internal Pullups
++	 */
++	platform_device_register(&cambria_i2c_gpio_sfpa);
++	platform_device_register(&cambria_i2c_gpio_sfpb);
++#endif
++
++	/* gpio config (/sys/class/gpio) */
++	cambria_register_gpio(ARRAY_AND_SIZE(cambria_gpios_gw2360));
++}
++
++static struct cambria_board_info cambria_boards[] __initdata = {
++	{
++		.model	= "GW2350",
++		.setup	= cambria_gw2350_setup,
++	}, {
++		.model	= "GW2351",
++		.setup	= cambria_gw2350_setup,
++	}, {
++		.model	= "GW2358",
++		.setup	= cambria_gw2358_setup,
++	}, {
++		.model	= "GW2359",
++		.setup	= cambria_gw2359_setup,
++	}, {
++		.model	= "GW2360",
++		.setup	= cambria_gw2360_setup,
++	}, {
++		.model	= "GW2371",
++		.setup	= cambria_gw2358_setup,
++	}
++};
++
++static struct cambria_board_info * __init cambria_find_board_info(char *model)
++{
++	int i;
++	model[6] = '\0';
++
++	for (i = 0; i < ARRAY_SIZE(cambria_boards); i++) {
++		struct cambria_board_info *info = &cambria_boards[i];
++		if (strcmp(info->model, model) == 0)
++			return info;
++	}
++
++	return NULL;
++}
++
++static struct memory_accessor *at24_mem_acc;
++
++static void at24_setup(struct memory_accessor *mem_acc, void *context)
++{
++	char mac_addr[ETH_ALEN];
++	char model[7];
++
++	at24_mem_acc = mem_acc;
++
++	/* Read MAC addresses */
++	if (at24_mem_acc->read(at24_mem_acc, mac_addr, 0x0, 6) == 6) {
++		memcpy(&cambria_npec_data.hwaddr, mac_addr, ETH_ALEN);
++	}
++	if (at24_mem_acc->read(at24_mem_acc, mac_addr, 0x6, 6) == 6) {
++		memcpy(&cambria_npea_data.hwaddr, mac_addr, ETH_ALEN);
++	}
++
++	/* Read the first 6 bytes of the model number */
++	if (at24_mem_acc->read(at24_mem_acc, model, 0x20, 6) == 6) {
++		cambria_info = cambria_find_board_info(model);
++	}
++
++}
++
++static struct at24_platform_data cambria_eeprom_info = {
++	.byte_len	= 1024,
++	.page_size	= 16,
++	.flags		= AT24_FLAG_READONLY,
++	.setup		= at24_setup,
++};
++
++static struct pca953x_platform_data cambria_pca_data = {
++	.gpio_base = 100,
++	.irq_base = -1,
++};
++
++static struct pca953x_platform_data cambria_pca2_data = {
++	.gpio_base = 116,
++	.irq_base = -1,
++};
++
++static struct i2c_board_info __initdata cambria_i2c_board_info[] = {
++	{
++		I2C_BOARD_INFO("pca9555", 0x23),
++		.platform_data = &cambria_pca_data,
++	},
++	{
++		I2C_BOARD_INFO("pca9555", 0x27),
++		.platform_data = &cambria_pca2_data,
++	},
++	{
++		I2C_BOARD_INFO("ds1672", 0x68),
++	},
++	{
++		I2C_BOARD_INFO("gsp", 0x29),
++	},
++	{
++		I2C_BOARD_INFO("ad7418", 0x28),
++	},
++	{
++		I2C_BOARD_INFO("24c08", 0x51),
++		.platform_data	= &cambria_eeprom_info
++	},
++	{
++		I2C_BOARD_INFO("gw_i2c_pld", 0x56),
++		.platform_data	= &gw_i2c_pld_data0,
++	},
++	{
++		I2C_BOARD_INFO("gw_i2c_pld", 0x57),
++		.platform_data	= &gw_i2c_pld_data1,
++	},
++};
++
++static void __init cambria_init(void)
++{
++	ixp4xx_sys_init();
++
++	cambria_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
++	cambria_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + SZ_32M - 1;
++
++	*IXP4XX_EXP_CS0 |= IXP4XX_FLASH_WRITABLE; // make sure window is writable
++	*IXP4XX_EXP_CS1 = *IXP4XX_EXP_CS0;
++
++	platform_add_devices(ARRAY_AND_SIZE(cambria_devices));
++
++	cambria_pata_resources[0].start = 0x53e00000;
++	cambria_pata_resources[0].end = 0x53e3ffff;
++
++	cambria_pata_resources[1].start = 0x53e40000;
++	cambria_pata_resources[1].end = 0x53e7ffff;
++
++	cambria_pata_data.cs0_cfg = IXP4XX_EXP_CS3;
++	cambria_pata_data.cs1_cfg = IXP4XX_EXP_CS3;
++
++	i2c_register_board_info(0, ARRAY_AND_SIZE(cambria_i2c_board_info));
++}
++
++static int __init cambria_model_setup(void)
++{
++	if (!machine_is_cambria())
++		return 0;
++
++	if (cambria_info) {
++		printk(KERN_DEBUG "Running on Gateworks Cambria %s\n",
++				cambria_info->model);
++		cambria_info->setup();
++	} else {
++		printk(KERN_INFO "Unknown/missing Cambria model number"
++				" -- defaults will be used\n");
++		cambria_gw23xx_setup();
++	}
++
++	return 0;
++}
++late_initcall(cambria_model_setup);
++
++MACHINE_START(CAMBRIA, "Gateworks Cambria series")
++	/* Maintainer: Imre Kaloz <kaloz@openwrt.org> */
++	.map_io		= ixp4xx_map_io,
++	.init_irq	= ixp4xx_init_irq,
++	.init_time	= ixp4xx_timer_init,
++	.atag_offset	= 0x0100,
++	.init_machine	= cambria_init,
++#if defined(CONFIG_PCI)
++	.dma_zone_size	= SZ_64M,
++#endif
++	.restart	= ixp4xx_restart,
++MACHINE_END
diff --git a/target/linux/ixp4xx/patches-4.1/201-npe_driver_print_license_location.patch b/target/linux/ixp4xx/patches-4.1/201-npe_driver_print_license_location.patch
new file mode 100644
index 0000000..f46b9c6
--- /dev/null
+++ b/target/linux/ixp4xx/patches-4.1/201-npe_driver_print_license_location.patch
@@ -0,0 +1,11 @@
+--- a/arch/arm/mach-ixp4xx/ixp4xx_npe.c
++++ b/arch/arm/mach-ixp4xx/ixp4xx_npe.c
+@@ -586,6 +586,8 @@ int npe_load_firmware(struct npe *npe, c
+ 	npe_reset(npe);
+ #endif
+ 
++	print_npe(KERN_INFO, npe, "firmware's license can be found in /usr/share/doc/LICENSE.IPL\n");
++
+ 	print_npe(KERN_INFO, npe, "firmware functionality 0x%X, "
+ 		  "revision 0x%X:%X\n", (image->id >> 16) & 0xFF,
+ 		  (image->id >> 8) & 0xFF, image->id & 0xFF);
diff --git a/target/linux/ixp4xx/patches-4.1/203-npe_driver_mask_phy_features.patch b/target/linux/ixp4xx/patches-4.1/203-npe_driver_mask_phy_features.patch
new file mode 100644
index 0000000..359873d
--- /dev/null
+++ b/target/linux/ixp4xx/patches-4.1/203-npe_driver_mask_phy_features.patch
@@ -0,0 +1,13 @@
+--- a/drivers/net/ethernet/xscale/ixp4xx_eth.c
++++ b/drivers/net/ethernet/xscale/ixp4xx_eth.c
+@@ -1474,6 +1474,10 @@ static int eth_init_one(struct platform_
+ 		goto err_free_mem;
+ 	}
+ 
++	/* mask with MAC supported features */
++	port->phydev->supported &= PHY_BASIC_FEATURES;
++	port->phydev->advertising = port->phydev->supported;
++
+ 	port->phydev->irq = PHY_POLL;
+ 
+ 	if ((err = register_netdev(dev)))
diff --git a/target/linux/ixp4xx/patches-4.1/205-npe_driver_separate_phy_functions.patch b/target/linux/ixp4xx/patches-4.1/205-npe_driver_separate_phy_functions.patch
new file mode 100644
index 0000000..6d1eb7b
--- /dev/null
+++ b/target/linux/ixp4xx/patches-4.1/205-npe_driver_separate_phy_functions.patch
@@ -0,0 +1,131 @@
+From e3eab80fb5d0a7d7fdb0f2f231b27161d5ec3804 Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jogo@openwrt.org>
+Date: Sun, 30 Jun 2013 15:52:53 +0200
+Subject: [PATCH 23/36] 205-npe_driver_separate_phy_functions.patch
+
+---
+ drivers/net/ethernet/xscale/ixp4xx_eth.c |   70 ++++++++++++++++++++++--------
+ 1 file changed, 51 insertions(+), 19 deletions(-)
+
+--- a/drivers/net/ethernet/xscale/ixp4xx_eth.c
++++ b/drivers/net/ethernet/xscale/ixp4xx_eth.c
+@@ -589,6 +589,51 @@ static void ixp4xx_adjust_link(struct ne
+ 	       dev->name, port->speed, port->duplex ? "full" : "half");
+ }
+ 
++static int ixp4xx_phy_connect(struct net_device *dev)
++{
++	struct port *port = netdev_priv(dev);
++	struct eth_plat_info *plat = port->plat;
++	char phy_id[MII_BUS_ID_SIZE + 3];
++
++	snprintf(phy_id, MII_BUS_ID_SIZE + 3, PHY_ID_FMT,
++		mdio_bus->id, plat->phy);
++	port->phydev = phy_connect(dev, phy_id, &ixp4xx_adjust_link,
++				   PHY_INTERFACE_MODE_MII);
++	if (IS_ERR(port->phydev)) {
++		printk(KERN_ERR "%s: Could not attach to PHY\n", dev->name);
++		return PTR_ERR(port->phydev);
++	}
++
++	/* mask with MAC supported features */
++	port->phydev->supported &= PHY_BASIC_FEATURES;
++	port->phydev->advertising = port->phydev->supported;
++
++	port->phydev->irq = PHY_POLL;
++
++	return 0;
++}
++
++static void ixp4xx_phy_disconnect(struct net_device *dev)
++{
++	struct port *port = netdev_priv(dev);
++
++	phy_disconnect(port->phydev);
++}
++
++static void ixp4xx_phy_start(struct net_device *dev)
++{
++	struct port *port = netdev_priv(dev);
++
++	port->speed = 0;	/* force "link up" message */
++	phy_start(port->phydev);
++}
++
++static void ixp4xx_phy_stop(struct net_device *dev)
++{
++	struct port *port = netdev_priv(dev);
++
++	phy_stop(port->phydev);
++}
+ 
+ static inline void debug_pkt(struct net_device *dev, const char *func,
+ 			     u8 *data, int len)
+@@ -1259,8 +1304,7 @@ static int eth_open(struct net_device *d
+ 		return err;
+ 	}
+ 
+-	port->speed = 0;	/* force "link up" message */
+-	phy_start(port->phydev);
++	ixp4xx_phy_start(dev);
+ 
+ 	for (i = 0; i < ETH_ALEN; i++)
+ 		__raw_writel(dev->dev_addr[i], &port->regs->hw_addr[i]);
+@@ -1381,7 +1425,7 @@ static int eth_close(struct net_device *
+ 		printk(KERN_CRIT "%s: unable to disable loopback\n",
+ 		       dev->name);
+ 
+-	phy_stop(port->phydev);
++	ixp4xx_phy_stop(dev);
+ 
+ 	if (!ports_open)
+ 		qmgr_disable_irq(TXDONE_QUEUE);
+@@ -1407,7 +1451,6 @@ static int eth_init_one(struct platform_
+ 	struct net_device *dev;
+ 	struct eth_plat_info *plat = dev_get_platdata(&pdev->dev);
+ 	u32 regs_phys;
+-	char phy_id[MII_BUS_ID_SIZE + 3];
+ 	int err;
+ 
+ 	if (!(dev = alloc_etherdev(sizeof(struct port))))
+@@ -1465,20 +1508,9 @@ static int eth_init_one(struct platform_
+ 	__raw_writel(DEFAULT_CORE_CNTRL, &port->regs->core_control);
+ 	udelay(50);
+ 
+-	snprintf(phy_id, MII_BUS_ID_SIZE + 3, PHY_ID_FMT,
+-		mdio_bus->id, plat->phy);
+-	port->phydev = phy_connect(dev, phy_id, &ixp4xx_adjust_link,
+-				   PHY_INTERFACE_MODE_MII);
+-	if (IS_ERR(port->phydev)) {
+-		err = PTR_ERR(port->phydev);
++	err = ixp4xx_phy_connect(dev);
++	if (err)
+ 		goto err_free_mem;
+-	}
+-
+-	/* mask with MAC supported features */
+-	port->phydev->supported &= PHY_BASIC_FEATURES;
+-	port->phydev->advertising = port->phydev->supported;
+-
+-	port->phydev->irq = PHY_POLL;
+ 
+ 	if ((err = register_netdev(dev)))
+ 		goto err_phy_dis;
+@@ -1489,7 +1521,7 @@ static int eth_init_one(struct platform_
+ 	return 0;
+ 
+ err_phy_dis:
+-	phy_disconnect(port->phydev);
++	ixp4xx_phy_disconnect(dev);
+ err_free_mem:
+ 	npe_port_tab[NPE_ID(port->id)] = NULL;
+ 	release_resource(port->mem_res);
+@@ -1506,7 +1538,7 @@ static int eth_remove_one(struct platfor
+ 	struct port *port = netdev_priv(dev);
+ 
+ 	unregister_netdev(dev);
+-	phy_disconnect(port->phydev);
++	ixp4xx_phy_disconnect(dev);
+ 	npe_port_tab[NPE_ID(port->id)] = NULL;
+ 	npe_release(port->npe);
+ 	release_resource(port->mem_res);
diff --git a/target/linux/ixp4xx/patches-4.1/206-npe_driver_add_update_link_function.patch b/target/linux/ixp4xx/patches-4.1/206-npe_driver_add_update_link_function.patch
new file mode 100644
index 0000000..f1a7707
--- /dev/null
+++ b/target/linux/ixp4xx/patches-4.1/206-npe_driver_add_update_link_function.patch
@@ -0,0 +1,98 @@
+--- a/drivers/net/ethernet/xscale/ixp4xx_eth.c
++++ b/drivers/net/ethernet/xscale/ixp4xx_eth.c
+@@ -177,7 +177,7 @@ struct port {
+ 	struct desc *desc_tab;	/* coherent */
+ 	u32 desc_tab_phys;
+ 	int id;			/* logical port ID */
+-	int speed, duplex;
++	int link, speed, duplex;
+ 	u8 firmware[4];
+ 	int hwts_tx_en;
+ 	int hwts_rx_en;
+@@ -558,37 +558,52 @@ static void ixp4xx_mdio_remove(void)
+ 	mdiobus_free(mdio_bus);
+ }
+ 
+-
+-static void ixp4xx_adjust_link(struct net_device *dev)
++static void ixp4xx_update_link(struct net_device *dev)
+ {
+ 	struct port *port = netdev_priv(dev);
+-	struct phy_device *phydev = port->phydev;
+ 
+-	if (!phydev->link) {
+-		if (port->speed) {
+-			port->speed = 0;
+-			printk(KERN_INFO "%s: link down\n", dev->name);
+-		}
++	if (!port->link) {
++		netif_carrier_off(dev);
++		printk(KERN_INFO "%s: link down\n", dev->name);
+ 		return;
+ 	}
+ 
+-	if (port->speed == phydev->speed && port->duplex == phydev->duplex)
+-		return;
+-
+-	port->speed = phydev->speed;
+-	port->duplex = phydev->duplex;
+-
+-	if (port->duplex)
++	if (port->duplex == DUPLEX_FULL)
+ 		__raw_writel(DEFAULT_TX_CNTRL0 & ~TX_CNTRL0_HALFDUPLEX,
+ 			     &port->regs->tx_control[0]);
+ 	else
+ 		__raw_writel(DEFAULT_TX_CNTRL0 | TX_CNTRL0_HALFDUPLEX,
+ 			     &port->regs->tx_control[0]);
+ 
++	netif_carrier_on(dev);
+ 	printk(KERN_INFO "%s: link up, speed %u Mb/s, %s duplex\n",
+ 	       dev->name, port->speed, port->duplex ? "full" : "half");
+ }
+ 
++static void ixp4xx_adjust_link(struct net_device *dev)
++{
++	struct port *port = netdev_priv(dev);
++	struct phy_device *phydev = port->phydev;
++	int status_change = 0;
++
++	if (phydev->link) {
++		if (port->duplex != phydev->duplex
++		    || port->speed != phydev->speed) {
++			status_change = 1;
++		}
++	}
++
++	if (phydev->link != port->link)
++		status_change = 1;
++
++	port->link = phydev->link;
++	port->speed = phydev->speed;
++	port->duplex = phydev->duplex;
++
++	if (status_change)
++		ixp4xx_update_link(dev);
++}
++
+ static int ixp4xx_phy_connect(struct net_device *dev)
+ {
+ 	struct port *port = netdev_priv(dev);
+@@ -624,7 +639,6 @@ static void ixp4xx_phy_start(struct net_
+ {
+ 	struct port *port = netdev_priv(dev);
+ 
+-	port->speed = 0;	/* force "link up" message */
+ 	phy_start(port->phydev);
+ }
+ 
+@@ -1515,6 +1529,10 @@ static int eth_init_one(struct platform_
+ 	if ((err = register_netdev(dev)))
+ 		goto err_phy_dis;
+ 
++	port->link = 0;
++	port->speed = 0;
++	port->duplex = -1;
++
+ 	printk(KERN_INFO "%s: MII PHY %i on %s\n", dev->name, plat->phy,
+ 	       npe_name(port->npe));
+ 
diff --git a/target/linux/ixp4xx/patches-4.1/207-npe_driver_multiphy_support.patch b/target/linux/ixp4xx/patches-4.1/207-npe_driver_multiphy_support.patch
new file mode 100644
index 0000000..32035ab
--- /dev/null
+++ b/target/linux/ixp4xx/patches-4.1/207-npe_driver_multiphy_support.patch
@@ -0,0 +1,154 @@
+TODO: take care of additional PHYs through the PHY abstraction layer
+
+--- a/arch/arm/mach-ixp4xx/include/mach/platform.h
++++ b/arch/arm/mach-ixp4xx/include/mach/platform.h
+@@ -74,7 +74,7 @@ extern unsigned long ixp4xx_exp_bus_size
+ /*
+  * Clock Speed Definitions.
+  */
+-#define IXP4XX_PERIPHERAL_BUS_CLOCK 	(66) /* 66Mhzi APB BUS   */ 
++#define IXP4XX_PERIPHERAL_BUS_CLOCK 	(66) /* 66Mhzi APB BUS   */
+ #define IXP4XX_UART_XTAL        	14745600
+ 
+ /*
+@@ -95,12 +95,23 @@ struct ixp4xx_pata_data {
+ #define IXP4XX_ETH_NPEB		0x10
+ #define IXP4XX_ETH_NPEC		0x20
+ 
++#define IXP4XX_ETH_PHY_MAX_ADDR	32
++
+ /* Information about built-in Ethernet MAC interfaces */
+ struct eth_plat_info {
+ 	u8 phy;		/* MII PHY ID, 0 - 31 */
+ 	u8 rxq;		/* configurable, currently 0 - 31 only */
+ 	u8 txreadyq;
+ 	u8 hwaddr[6];
++
++	u32 phy_mask;
++#if 0
++	int speed;
++	int duplex;
++#else
++	int speed_10;
++	int half_duplex;
++#endif
+ };
+ 
+ /* Information about built-in HSS (synchronous serial) interfaces */
+--- a/drivers/net/ethernet/xscale/ixp4xx_eth.c
++++ b/drivers/net/ethernet/xscale/ixp4xx_eth.c
+@@ -610,6 +610,37 @@ static int ixp4xx_phy_connect(struct net
+ 	struct eth_plat_info *plat = port->plat;
+ 	char phy_id[MII_BUS_ID_SIZE + 3];
+ 
++	if (plat->phy == IXP4XX_ETH_PHY_MAX_ADDR) {
++#if 0
++		switch (plat->speed) {
++		case SPEED_10:
++		case SPEED_100:
++			break;
++		default:
++			printk(KERN_ERR "%s: invalid speed (%d)\n",
++					dev->name, plat->speed);
++			return -EINVAL;
++		}
++
++		switch (plat->duplex) {
++		case DUPLEX_HALF:
++		case DUPLEX_FULL:
++			break;
++		default:
++			printk(KERN_ERR "%s: invalid duplex mode (%d)\n",
++					dev->name, plat->duplex);
++			return -EINVAL;
++		}
++		port->speed = plat->speed;
++		port->duplex = plat->duplex;
++#else
++		port->speed = plat->speed_10 ? SPEED_10 : SPEED_100;
++		port->duplex = plat->half_duplex ? DUPLEX_HALF : DUPLEX_FULL;
++#endif
++
++		return 0;
++	}
++
+ 	snprintf(phy_id, MII_BUS_ID_SIZE + 3, PHY_ID_FMT,
+ 		mdio_bus->id, plat->phy);
+ 	port->phydev = phy_connect(dev, phy_id, &ixp4xx_adjust_link,
+@@ -632,21 +663,32 @@ static void ixp4xx_phy_disconnect(struct
+ {
+ 	struct port *port = netdev_priv(dev);
+ 
+-	phy_disconnect(port->phydev);
++	if (port->phydev)
++		phy_disconnect(port->phydev);
+ }
+ 
+ static void ixp4xx_phy_start(struct net_device *dev)
+ {
+ 	struct port *port = netdev_priv(dev);
+ 
+-	phy_start(port->phydev);
++	if (port->phydev) {
++		phy_start(port->phydev);
++	} else {
++		port->link = 1;
++		ixp4xx_update_link(dev);
++	}
+ }
+ 
+ static void ixp4xx_phy_stop(struct net_device *dev)
+ {
+ 	struct port *port = netdev_priv(dev);
+ 
+-	phy_stop(port->phydev);
++	if (port->phydev) {
++		phy_stop(port->phydev);
++	} else {
++		port->link = 0;
++		ixp4xx_update_link(dev);
++	}
+ }
+ 
+ static inline void debug_pkt(struct net_device *dev, const char *func,
+@@ -1048,6 +1090,9 @@ static int eth_ioctl(struct net_device *
+ 			return hwtstamp_get(dev, req);
+ 	}
+ 
++	if (!port->phydev)
++		return -EOPNOTSUPP;
++
+ 	return phy_mii_ioctl(port->phydev, req, cmd);
+ }
+ 
+@@ -1068,18 +1113,30 @@ static void ixp4xx_get_drvinfo(struct ne
+ static int ixp4xx_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
+ {
+ 	struct port *port = netdev_priv(dev);
++
++	if (!port->phydev)
++		return -EOPNOTSUPP;
++
+ 	return phy_ethtool_gset(port->phydev, cmd);
+ }
+ 
+ static int ixp4xx_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
+ {
+ 	struct port *port = netdev_priv(dev);
++
++	if (!port->phydev)
++		return -EOPNOTSUPP;
++
+ 	return phy_ethtool_sset(port->phydev, cmd);
+ }
+ 
+ static int ixp4xx_nway_reset(struct net_device *dev)
+ {
+ 	struct port *port = netdev_priv(dev);
++
++	if (!port->phydev)
++		return -EOPNOTSUPP;
++
+ 	return phy_start_aneg(port->phydev);
+ }
+ 
diff --git a/target/linux/ixp4xx/patches-4.1/295-latch_led_driver.patch b/target/linux/ixp4xx/patches-4.1/295-latch_led_driver.patch
new file mode 100644
index 0000000..fb08143
--- /dev/null
+++ b/target/linux/ixp4xx/patches-4.1/295-latch_led_driver.patch
@@ -0,0 +1,201 @@
+--- a/drivers/leds/Kconfig
++++ b/drivers/leds/Kconfig
+@@ -271,6 +271,12 @@ config LEDS_LP8860
+ 	  on the LP8860 4 channel LED driver using the I2C communication
+ 	  bus.
+ 
++config LEDS_LATCH
++	tristate "LED Support for Memory Latched LEDs"
++	depends on LEDS_CLASS
++	help
++		-- To Do --
++
+ config LEDS_CLEVO_MAIL
+ 	tristate "Mail LED on Clevo notebook"
+ 	depends on LEDS_CLASS
+--- a/drivers/leds/Makefile
++++ b/drivers/leds/Makefile
+@@ -22,6 +22,7 @@ obj-$(CONFIG_LEDS_SUNFIRE)		+= leds-sunf
+ obj-$(CONFIG_LEDS_PCA9532)		+= leds-pca9532.o
+ obj-$(CONFIG_LEDS_GPIO_REGISTER)	+= leds-gpio-register.o
+ obj-$(CONFIG_LEDS_GPIO)			+= leds-gpio.o
++obj-$(CONFIG_LEDS_LATCH)		+= leds-latch.o
+ obj-$(CONFIG_LEDS_LP3944)		+= leds-lp3944.o
+ obj-$(CONFIG_LEDS_LP55XX_COMMON)	+= leds-lp55xx-common.o
+ obj-$(CONFIG_LEDS_LP5521)		+= leds-lp5521.o
+--- /dev/null
++++ b/drivers/leds/leds-latch.c
+@@ -0,0 +1,152 @@
++/*
++ * LEDs driver for Memory Latched Devices
++ *
++ * Copyright (C) 2008 Gateworks Corp.
++ * Chris Lang <clang@gateworks.com>
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ *
++ */
++#include <linux/kernel.h>
++#include <linux/slab.h>
++#include <linux/init.h>
++#include <linux/platform_device.h>
++#include <linux/leds.h>
++#include <linux/workqueue.h>
++#include <asm/io.h>
++#include <linux/spinlock.h>
++#include <linux/slab.h>
++#include <linux/module.h>
++#include <linux/export.h>
++
++static unsigned int mem_keep = 0xFF;
++static spinlock_t mem_lock;
++static unsigned char *iobase;
++
++struct latch_led_data {
++	struct led_classdev cdev;
++	struct work_struct work;
++	u8 new_level;
++	u8 bit;
++	void (*set_led)(u8 bit, enum led_brightness value);
++};
++
++static void latch_set_led(u8 bit, enum led_brightness value)
++{
++	if (value == LED_OFF)
++		mem_keep |= (0x1 << bit);
++	else
++		mem_keep &= ~(0x1 << bit);
++
++	writeb(mem_keep, iobase);
++}
++
++static void latch_led_set(struct led_classdev *led_cdev,
++	enum led_brightness value)
++{
++	struct latch_led_data *led_dat =
++		container_of(led_cdev, struct latch_led_data, cdev);
++
++	raw_spin_lock(mem_lock);
++
++	led_dat->set_led(led_dat->bit, value);
++
++	raw_spin_unlock(mem_lock);
++}
++
++static int latch_led_probe(struct platform_device *pdev)
++{
++	struct latch_led_platform_data *pdata = pdev->dev.platform_data;
++	struct latch_led *cur_led;
++	struct latch_led_data *leds_data, *led_dat;
++	int i, ret = 0;
++
++	if (!pdata)
++		return -EBUSY;
++
++	leds_data = kzalloc(sizeof(struct latch_led_data) * pdata->num_leds,
++				GFP_KERNEL);
++	if (!leds_data)
++		return -ENOMEM;
++
++	for (i = 0; i < pdata->num_leds; i++) {
++		cur_led = &pdata->leds[i];
++		led_dat = &leds_data[i];
++
++		led_dat->cdev.name = cur_led->name;
++		led_dat->cdev.default_trigger = cur_led->default_trigger;
++		led_dat->cdev.brightness_set = latch_led_set;
++		led_dat->cdev.brightness = LED_OFF;
++		led_dat->bit = cur_led->bit;
++		led_dat->set_led = pdata->set_led ? pdata->set_led : latch_set_led;
++
++		ret = led_classdev_register(&pdev->dev, &led_dat->cdev);
++		if (ret < 0) {
++			goto err;
++		}
++	}
++
++	if (!pdata->set_led) {
++		iobase = ioremap_nocache(pdata->mem, 0x1000);
++		writeb(0xFF, iobase);
++	}
++	platform_set_drvdata(pdev, leds_data);
++
++	return 0;
++
++err:
++	if (i > 0) {
++		for (i = i - 1; i >= 0; i--) {
++			led_classdev_unregister(&leds_data[i].cdev);
++		}
++	}
++
++	kfree(leds_data);
++
++	return ret;
++}
++
++static int latch_led_remove(struct platform_device *pdev)
++{
++	int i;
++	struct latch_led_platform_data *pdata = pdev->dev.platform_data;
++	struct latch_led_data *leds_data;
++
++	leds_data = platform_get_drvdata(pdev);
++
++	for (i = 0; i < pdata->num_leds; i++) {
++		led_classdev_unregister(&leds_data[i].cdev);
++		cancel_work_sync(&leds_data[i].work);
++	}
++
++	kfree(leds_data);
++
++	return 0;
++}
++
++static struct platform_driver latch_led_driver = {
++	.probe		= latch_led_probe,
++	.remove		= latch_led_remove,
++	.driver		= {
++		.name	= "leds-latch",
++		.owner	= THIS_MODULE,
++	},
++};
++
++static int __init latch_led_init(void)
++{
++	return platform_driver_register(&latch_led_driver);
++}
++
++static void __exit latch_led_exit(void)
++{
++	platform_driver_unregister(&latch_led_driver);
++}
++
++module_init(latch_led_init);
++module_exit(latch_led_exit);
++
++MODULE_AUTHOR("Chris Lang <clang@gateworks.com>");
++MODULE_DESCRIPTION("Latch LED driver");
+--- a/include/linux/leds.h
++++ b/include/linux/leds.h
+@@ -344,4 +344,18 @@ static inline void ledtrig_cpu(enum cpu_
+ }
+ #endif
+ 
++/* For the leds-latch driver */
++struct latch_led {
++	const char *name;
++	char *default_trigger;
++	unsigned  bit;
++};
++
++struct latch_led_platform_data {
++	int     num_leds;
++	u32     mem;
++	struct latch_led *leds;
++	void	(*set_led)(u8 bit, enum led_brightness value);
++};
++
+ #endif		/* __LINUX_LEDS_H_INCLUDED */
diff --git a/target/linux/ixp4xx/patches-4.1/300-avila_support.patch b/target/linux/ixp4xx/patches-4.1/300-avila_support.patch
new file mode 100644
index 0000000..d2dafaa
--- /dev/null
+++ b/target/linux/ixp4xx/patches-4.1/300-avila_support.patch
@@ -0,0 +1,726 @@
+--- a/arch/arm/mach-ixp4xx/avila-pci.c
++++ b/arch/arm/mach-ixp4xx/avila-pci.c
+@@ -27,8 +27,8 @@
+ #include <mach/hardware.h>
+ #include <asm/mach-types.h>
+ 
+-#define AVILA_MAX_DEV	4
+-#define LOFT_MAX_DEV	6
++#define AVILA_MAX_DEV	6
++
+ #define IRQ_LINES	4
+ 
+ /* PCI controller GPIO to IRQ pin mappings */
+@@ -55,10 +55,8 @@ static int __init avila_map_irq(const st
+ 		IXP4XX_GPIO_IRQ(INTD)
+ 	};
+ 
+-	if (slot >= 1 &&
+-	    slot <= (machine_is_loft() ? LOFT_MAX_DEV : AVILA_MAX_DEV) &&
+-	    pin >= 1 && pin <= IRQ_LINES)
+-		return pci_irq_table[(slot + pin - 2) % 4];
++	if (slot >= 1 && slot <= AVILA_MAX_DEV && pin >= 1 && pin <= IRQ_LINES)
++		return pci_irq_table[(slot + pin - 2) % IRQ_LINES];
+ 
+ 	return -1;
+ }
+--- a/arch/arm/mach-ixp4xx/avila-setup.c
++++ b/arch/arm/mach-ixp4xx/avila-setup.c
+@@ -14,9 +14,16 @@
+ #include <linux/kernel.h>
+ #include <linux/init.h>
+ #include <linux/device.h>
++#include <linux/if_ether.h>
++#include <linux/socket.h>
++#include <linux/netdevice.h>
+ #include <linux/serial.h>
+ #include <linux/tty.h>
+ #include <linux/serial_8250.h>
++#include <linux/i2c.h>
++#include <linux/platform_data/at24.h>
++#include <linux/leds.h>
++#include <linux/platform_data/pca953x.h>
+ #include <linux/i2c-gpio.h>
+ #include <asm/types.h>
+ #include <asm/setup.h>
+@@ -26,10 +33,25 @@
+ #include <asm/irq.h>
+ #include <asm/mach/arch.h>
+ #include <asm/mach/flash.h>
++#include <linux/irq.h>
+ 
+ #define AVILA_SDA_PIN	7
+ #define AVILA_SCL_PIN	6
+ 
++/* User LEDs */
++#define AVILA_GW23XX_LED_USER_GPIO     3
++#define AVILA_GW23X7_LED_USER_GPIO     4
++
++/* gpio mask used by platform device */
++#define AVILA_GPIO_MASK        (1 << 1) | (1 << 3) | (1 << 5) | (1 << 7) | (1 << 9)
++
++struct avila_board_info {
++	unsigned char	*model;
++	void		(*setup)(void);
++};
++
++static struct avila_board_info *avila_info __initdata;
++
+ static struct flash_platform_data avila_flash_data = {
+ 	.map_name	= "cfi_probe",
+ 	.width		= 2,
+@@ -105,14 +127,69 @@ static struct platform_device avila_uart
+ 	.resource		= avila_uart_resources
+ };
+ 
+-static struct resource avila_pata_resources[] = {
++static struct resource avila_optional_uart_resources[] = {
+ 	{
+-		.flags	= IORESOURCE_MEM
+-	},
++		.start  = 0x54000000,
++		.end  = 0x54000fff,
++		.flags  = IORESOURCE_MEM
++	},{
++		.start  = 0x55000000,
++		.end  = 0x55000fff,
++		.flags  = IORESOURCE_MEM
++	},{
++		.start  = 0x56000000,
++		.end  = 0x56000fff,
++		.flags  = IORESOURCE_MEM
++	},{
++		.start  = 0x57000000,
++		.end  = 0x57000fff,
++		.flags  = IORESOURCE_MEM
++	}
++};
++
++static struct plat_serial8250_port avila_optional_uart_data[] = {
+ 	{
+-		.flags	= IORESOURCE_MEM,
++		.flags    = UPF_BOOT_AUTOCONF,
++		.iotype   = UPIO_MEM,
++		.regshift = 0,
++		.uartclk  = 18432000,
++		.rw_delay = 2,
++	},{
++		.flags    = UPF_BOOT_AUTOCONF,
++		.iotype   = UPIO_MEM,
++		.regshift = 0,
++		.uartclk  = 18432000,
++		.rw_delay = 2,
++	},{
++		.flags    = UPF_BOOT_AUTOCONF,
++		.iotype   = UPIO_MEM,
++		.regshift = 0,
++		.uartclk  = 18432000,
++		.rw_delay = 2,
++	},{
++		.flags    = UPF_BOOT_AUTOCONF,
++		.iotype   = UPIO_MEM,
++		.regshift = 0,
++		.uartclk  = 18432000,
++		.rw_delay = 2,
+ 	},
++	{ }
++};
++
++static struct platform_device avila_optional_uart = {
++  .name   = "serial8250",
++  .id   = PLAT8250_DEV_PLATFORM1,
++  .dev.platform_data  = avila_optional_uart_data,
++  .num_resources  = 4,
++  .resource = avila_optional_uart_resources,
++};
++
++static struct resource avila_pata_resources[] = {
+ 	{
++		.flags	= IORESOURCE_MEM
++	},{
++		.flags	= IORESOURCE_MEM,
++	},{
+ 		.name	= "intrq",
+ 		.start	= IRQ_IXP4XX_GPIO12,
+ 		.end	= IRQ_IXP4XX_GPIO12,
+@@ -133,21 +210,237 @@ static struct platform_device avila_pata
+ 	.resource		= avila_pata_resources,
+ };
+ 
++/* Built-in 10/100 Ethernet MAC interfaces */
++static struct eth_plat_info avila_npeb_data = {
++	.phy		= 0,
++	.rxq		= 3,
++	.txreadyq	= 20,
++};
++
++static struct eth_plat_info avila_npec_data = {
++	.phy		= 1,
++	.rxq		= 4,
++	.txreadyq	= 21,
++};
++
++static struct platform_device avila_npeb_device = {
++	.name			= "ixp4xx_eth",
++	.id			= IXP4XX_ETH_NPEB,
++	.dev.platform_data	= &avila_npeb_data,
++	.dev.coherent_dma_mask	= DMA_BIT_MASK(32),
++};
++
++static struct platform_device avila_npec_device = {
++	.name			= "ixp4xx_eth",
++	.id			= IXP4XX_ETH_NPEC,
++	.dev.platform_data	= &avila_npec_data,
++	.dev.coherent_dma_mask	= DMA_BIT_MASK(32),
++};
++
++static struct gpio_led avila_gpio_leds[] = {
++	{
++		.name		= "user",  /* green led */
++		.gpio		= AVILA_GW23XX_LED_USER_GPIO,
++		.active_low	= 1,
++	},
++	{
++		.name		= "radio1",  /* green led */
++		.gpio		= 104,
++		.active_low	= 1,
++	},
++	{
++		.name		= "radio2",  /* green led */
++		.gpio		= 105,
++		.active_low	= 1,
++	},
++	{
++		.name		= "radio3",  /* green led */
++		.gpio		= 106,
++		.active_low	= 1,
++	},
++	{
++		.name		= "radio4",  /* green led */
++		.gpio		= 107,
++		.active_low	= 1,
++	},
++
++};
++
++static struct gpio_led_platform_data avila_gpio_leds_data = {
++	.num_leds		= 1,
++	.leds			= avila_gpio_leds,
++};
++
++static struct platform_device avila_gpio_leds_device = {
++	.name			= "leds-gpio",
++	.id			= -1,
++	.dev.platform_data	= &avila_gpio_leds_data,
++};
++
++static struct latch_led avila_latch_leds[] = {
++	{
++		.name	= "led0",  /* green led */
++		.bit	= 0,
++	},
++	{
++		.name	= "led1",  /* green led */
++		.bit	= 1,
++	},
++	{
++		.name	= "led2",  /* green led */
++		.bit	= 2,
++	},
++	{
++		.name	= "led3",  /* green led */
++		.bit	= 3,
++	},
++	{
++		.name	= "led4",  /* green led */
++		.bit	= 4,
++	},
++	{
++		.name	= "led5",  /* green led */
++		.bit	= 5,
++	},
++	{
++		.name	= "led6",  /* green led */
++		.bit	= 6,
++	},
++	{
++		.name	= "led7",  /* green led */
++		.bit	= 7,
++	}
++};
++
++static struct latch_led_platform_data avila_latch_leds_data = {
++	.num_leds	= 8,
++	.leds		= avila_latch_leds,
++	.mem		= 0x51000000,
++};
++
++static struct platform_device avila_latch_leds_device = {
++	.name			= "leds-latch",
++	.id			= -1,
++	.dev.platform_data	= &avila_latch_leds_data,
++};
++
+ static struct platform_device *avila_devices[] __initdata = {
+ 	&avila_i2c_gpio,
+-	&avila_flash,
+ 	&avila_uart
+ };
+ 
+-static void __init avila_init(void)
++/*
++ * Audio Devices
++ */
++
++static struct platform_device avila_hss_device[] = {
++	{
++		.name = "gw_avila_hss",
++		.id = 0,
++	},{
++		.name = "gw_avila_hss",
++		.id = 1,
++	},{
++		.name = "gw_avila_hss",
++		.id = 2,
++	},{
++		.name = "gw_avila_hss",
++		.id = 3,
++	},
++};
++
++static struct platform_device avila_pcm_device[] = {
++	{
++		.name = "gw_avila-audio",
++		.id = 0,
++	},{
++		.name = "gw_avila-audio",
++		.id = 1,
++	},{
++		.name = "gw_avila-audio",
++		.id = 2,
++	},{
++		.name = "gw_avila-audio",
++		.id = 3,
++	}
++};
++
++static void setup_audio_devices(void) {
++	platform_device_register(&avila_hss_device[0]);
++	platform_device_register(&avila_hss_device[1]);
++	platform_device_register(&avila_hss_device[2]);
++	platform_device_register(&avila_hss_device[3]);
++
++	platform_device_register(&avila_pcm_device[0]);
++	platform_device_register(&avila_pcm_device[1]);
++	platform_device_register(&avila_pcm_device[2]);
++	platform_device_register(&avila_pcm_device[3]);
++}
++
++static void __init avila_gw23xx_setup(void)
+ {
+-	ixp4xx_sys_init();
++	platform_device_register(&avila_npeb_device);
++	platform_device_register(&avila_npec_device);
+ 
+-	avila_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
+-	avila_flash_resource.end =
+-		IXP4XX_EXP_BUS_BASE(0) + ixp4xx_exp_bus_size - 1;
++	platform_device_register(&avila_gpio_leds_device);
++}
+ 
+-	platform_add_devices(avila_devices, ARRAY_SIZE(avila_devices));
++static void __init avila_gw2342_setup(void)
++{
++	platform_device_register(&avila_npeb_device);
++	platform_device_register(&avila_npec_device);
++
++	platform_device_register(&avila_gpio_leds_device);
++
++	avila_pata_resources[0].start = IXP4XX_EXP_BUS_BASE(1);
++	avila_pata_resources[0].end = IXP4XX_EXP_BUS_END(1);
++
++	avila_pata_resources[1].start = IXP4XX_EXP_BUS_BASE(2);
++	avila_pata_resources[1].end = IXP4XX_EXP_BUS_END(2);
++
++	avila_pata_data.cs0_cfg = IXP4XX_EXP_CS1;
++	avila_pata_data.cs1_cfg = IXP4XX_EXP_CS2;
++
++	platform_device_register(&avila_pata);
++}
++
++static void __init avila_gw2345_setup(void)
++{
++	avila_npeb_data.phy = IXP4XX_ETH_PHY_MAX_ADDR;
++	avila_npeb_data.phy_mask = 0x1e; /* ports 1-4 of the KS8995 switch */
++	platform_device_register(&avila_npeb_device);
++
++	avila_npec_data.phy = 5; /* port 5 of the KS8995 switch */
++	platform_device_register(&avila_npec_device);
++
++	platform_device_register(&avila_gpio_leds_device);
++
++	avila_pata_resources[0].start = IXP4XX_EXP_BUS_BASE(1);
++	avila_pata_resources[0].end = IXP4XX_EXP_BUS_END(1);
++
++	avila_pata_resources[1].start = IXP4XX_EXP_BUS_BASE(2);
++	avila_pata_resources[1].end = IXP4XX_EXP_BUS_END(2);
++
++	avila_pata_data.cs0_cfg = IXP4XX_EXP_CS1;
++	avila_pata_data.cs1_cfg = IXP4XX_EXP_CS2;
++
++	platform_device_register(&avila_pata);
++}
++
++static void __init avila_gw2347_setup(void)
++{
++	platform_device_register(&avila_npeb_device);
++
++	avila_gpio_leds[0].gpio = AVILA_GW23X7_LED_USER_GPIO;
++	platform_device_register(&avila_gpio_leds_device);
++}
++
++static void __init avila_gw2348_setup(void)
++{
++	platform_device_register(&avila_npeb_device);
++	platform_device_register(&avila_npec_device);
++
++	platform_device_register(&avila_gpio_leds_device);
+ 
+ 	avila_pata_resources[0].start = IXP4XX_EXP_BUS_BASE(1);
+ 	avila_pata_resources[0].end = IXP4XX_EXP_BUS_END(1);
+@@ -159,8 +452,335 @@ static void __init avila_init(void)
+ 	avila_pata_data.cs1_cfg = IXP4XX_EXP_CS2;
+ 
+ 	platform_device_register(&avila_pata);
++}
++
++static void __init avila_gw2353_setup(void)
++{
++	platform_device_register(&avila_npeb_device);
++	platform_device_register(&avila_gpio_leds_device);
++}
++
++static void __init avila_gw2355_setup(void)
++{
++	avila_npeb_data.phy = IXP4XX_ETH_PHY_MAX_ADDR;
++	avila_npeb_data.phy_mask = 0x1e; /* ports 1-4 of the KS8995 switch */
++	platform_device_register(&avila_npeb_device);
++
++	avila_npec_data.phy = 16;
++	platform_device_register(&avila_npec_device);
++
++	avila_gpio_leds[0].gpio = AVILA_GW23X7_LED_USER_GPIO;
++	platform_device_register(&avila_gpio_leds_device);
++
++	*IXP4XX_EXP_CS4 |= 0xbfff3c03;
++	avila_latch_leds[0].name = "RXD";
++	avila_latch_leds[1].name = "TXD";
++	avila_latch_leds[2].name = "POL";
++	avila_latch_leds[3].name = "LNK";
++	avila_latch_leds[4].name = "ERR";
++	avila_latch_leds_data.num_leds = 5;
++	avila_latch_leds_data.mem = 0x54000000;
++	platform_device_register(&avila_latch_leds_device);
++
++	avila_pata_resources[0].start = IXP4XX_EXP_BUS_BASE(1);
++	avila_pata_resources[0].end = IXP4XX_EXP_BUS_END(1);
++
++	avila_pata_resources[1].start = IXP4XX_EXP_BUS_BASE(2);
++	avila_pata_resources[1].end = IXP4XX_EXP_BUS_END(2);
++
++	avila_pata_data.cs0_cfg = IXP4XX_EXP_CS1;
++	avila_pata_data.cs1_cfg = IXP4XX_EXP_CS2;
++
++	platform_device_register(&avila_pata);
++}
++
++static void __init avila_gw2357_setup(void)
++{
++	platform_device_register(&avila_npeb_device);
++
++	avila_gpio_leds[0].gpio = AVILA_GW23X7_LED_USER_GPIO;
++	platform_device_register(&avila_gpio_leds_device);
++
++	*IXP4XX_EXP_CS1 |= 0xbfff3c03;
++	platform_device_register(&avila_latch_leds_device);
++}
++
++static void __init avila_gw2365_setup(void)
++{
++	avila_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + SZ_32M - 1;
++
++	*IXP4XX_EXP_CS4 = 0xBFFF3C43;
++	irq_set_irq_type(IRQ_IXP4XX_GPIO0, IRQ_TYPE_EDGE_RISING);
++	avila_optional_uart_data[0].mapbase = 0x54000000;
++	avila_optional_uart_data[0].membase = (void __iomem *)ioremap(0x54000000, 0x0fff);
++	avila_optional_uart_data[0].irq   = IRQ_IXP4XX_GPIO0;
++
++	*IXP4XX_EXP_CS5 = 0xBFFF3C43;
++	irq_set_irq_type(IRQ_IXP4XX_GPIO1, IRQ_TYPE_EDGE_RISING);
++	avila_optional_uart_data[1].mapbase = 0x55000000;
++	avila_optional_uart_data[1].membase = (void __iomem *)ioremap(0x55000000, 0x0fff);
++	avila_optional_uart_data[1].irq   = IRQ_IXP4XX_GPIO1;
++
++	*IXP4XX_EXP_CS6 = 0xBFFF3C43;
++	irq_set_irq_type(IRQ_IXP4XX_GPIO2, IRQ_TYPE_EDGE_RISING);
++	avila_optional_uart_data[2].mapbase = 0x56000000;
++	avila_optional_uart_data[2].membase = (void __iomem *)ioremap(0x56000000, 0x0fff);
++	avila_optional_uart_data[2].irq   = IRQ_IXP4XX_GPIO2;
++
++	*IXP4XX_EXP_CS7 = 0xBFFF3C43;
++	irq_set_irq_type(IRQ_IXP4XX_GPIO3, IRQ_TYPE_EDGE_RISING);
++	avila_optional_uart_data[3].mapbase = 0x57000000;
++	avila_optional_uart_data[3].membase = (void __iomem *)ioremap(0x57000000, 0x0fff);
++	avila_optional_uart_data[3].irq   = IRQ_IXP4XX_GPIO3;
++
++	platform_device_register(&avila_optional_uart);
++
++	avila_npeb_data.phy = 1;
++	platform_device_register(&avila_npeb_device);
++
++	avila_npec_data.phy = 2;
++	platform_device_register(&avila_npec_device);
++
++	avila_pata_resources[0].start = IXP4XX_EXP_BUS_BASE(2);
++	avila_pata_resources[0].end = IXP4XX_EXP_BUS_END(2);
++
++	avila_pata_resources[1].start = IXP4XX_EXP_BUS_BASE(3);
++	avila_pata_resources[1].end = IXP4XX_EXP_BUS_END(3);
++
++	avila_pata_data.cs0_cfg = IXP4XX_EXP_CS2;
++	avila_pata_data.cs1_cfg = IXP4XX_EXP_CS3;
++
++	platform_device_register(&avila_pata);
++
++	avila_gpio_leds[0].gpio = 109;
++	avila_gpio_leds_data.num_leds = 5;
++	platform_device_register(&avila_gpio_leds_device);
++
++	setup_audio_devices();
++}
++
++static void __init avila_gw2369_setup(void)
++{
++	avila_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + SZ_32M - 1;
++
++	avila_npeb_data.phy = 1;
++	platform_device_register(&avila_npeb_device);
++
++	avila_npec_data.phy = 2;
++	platform_device_register(&avila_npec_device);
++
++	setup_audio_devices();
++}
++
++static void __init avila_gw2370_setup(void)
++{
++	avila_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + SZ_32M - 1;
++
++	avila_npeb_data.phy = 5;
++	platform_device_register(&avila_npeb_device);
++
++	avila_npec_data.phy = IXP4XX_ETH_PHY_MAX_ADDR;
++	avila_npec_data.phy_mask = 0x1e; /* ports 1-4 of the KS8995 switch */
++	platform_device_register(&avila_npec_device);
++
++	*IXP4XX_EXP_CS2 = 0xBFFF3C43;
++	irq_set_irq_type(IRQ_IXP4XX_GPIO2, IRQ_TYPE_EDGE_RISING);
++	avila_optional_uart_data[0].mapbase = 0x52000000;
++	avila_optional_uart_data[0].membase = (void __iomem *)ioremap(0x52000000, 0x0fff);
++	avila_optional_uart_data[0].irq   = IRQ_IXP4XX_GPIO2;
++
++	*IXP4XX_EXP_CS3 = 0xBFFF3C43;
++	irq_set_irq_type(IRQ_IXP4XX_GPIO3, IRQ_TYPE_EDGE_RISING);
++	avila_optional_uart_data[1].mapbase = 0x53000000;
++	avila_optional_uart_data[1].membase = (void __iomem *)ioremap(0x53000000, 0x0fff);
++	avila_optional_uart_data[1].irq   = IRQ_IXP4XX_GPIO3;
++
++	avila_optional_uart.num_resources = 2;
++
++	platform_device_register(&avila_optional_uart);
++
++	avila_gpio_leds[0].gpio = 101;
++	platform_device_register(&avila_gpio_leds_device);
++
++	setup_audio_devices();
++}
++
++static void __init avila_gw2375_setup(void)
++{
++	avila_npeb_data.phy = 1;
++	platform_device_register(&avila_npeb_device);
++
++	avila_npec_data.phy = 2;
++	platform_device_register(&avila_npec_device);
++
++	*IXP4XX_EXP_CS2 = 0xBFFF3C43;
++	irq_set_irq_type(IRQ_IXP4XX_GPIO10, IRQ_TYPE_EDGE_RISING);
++	avila_optional_uart_data[0].mapbase = 0x52000000;
++	avila_optional_uart_data[0].membase = (void __iomem *)ioremap(0x52000000, 0x0fff);
++	avila_optional_uart_data[0].irq   = IRQ_IXP4XX_GPIO10;
++
++	avila_optional_uart.num_resources = 1;
++
++	platform_device_register(&avila_optional_uart);
++
++	setup_audio_devices();
++}
++
++
++static struct avila_board_info avila_boards[] __initdata = {
++	{
++		.model		= "GW2342",
++		.setup		= avila_gw2342_setup,
++	}, {
++		.model		= "GW2345",
++		.setup		= avila_gw2345_setup,
++	}, {
++		.model		= "GW2347",
++		.setup		= avila_gw2347_setup,
++	}, {
++		.model		= "GW2348",
++		.setup		= avila_gw2348_setup,
++	}, {
++		.model		= "GW2353",
++		.setup		= avila_gw2353_setup,
++	}, {
++		.model		= "GW2355",
++		.setup		= avila_gw2355_setup,
++	}, {
++		.model		= "GW2357",
++		.setup		= avila_gw2357_setup,
++	}, {
++		.model		= "GW2365",
++		.setup		= avila_gw2365_setup,
++	}, {
++		.model		= "GW2369",
++		.setup		= avila_gw2369_setup,
++	}, {
++		.model		= "GW2370",
++		.setup		= avila_gw2370_setup,
++	}, {
++		.model		= "GW2373",
++		.setup		= avila_gw2369_setup,
++	}, {
++		.model		= "GW2375",
++		.setup		= avila_gw2375_setup,
++	}
++};
++
++static struct avila_board_info * __init avila_find_board_info(char *model)
++{
++	int i;
++	model[6] = '\0';
++
++	for (i = 0; i < ARRAY_SIZE(avila_boards); i++) {
++		struct avila_board_info *info = &avila_boards[i];
++		if (strcmp(info->model, model) == 0)
++			return info;
++	}
++
++	return NULL;
++}
++
++static struct memory_accessor *at24_mem_acc;
++
++static void at24_setup(struct memory_accessor *mem_acc, void *context)
++{
++	char mac_addr[ETH_ALEN];
++	char model[7];
++
++	at24_mem_acc = mem_acc;
++
++	/* Read MAC addresses */
++	if (at24_mem_acc->read(at24_mem_acc, mac_addr, 0x0, 6) == 6) {
++		memcpy(&avila_npeb_data.hwaddr, mac_addr, ETH_ALEN);
++	}
++	if (at24_mem_acc->read(at24_mem_acc, mac_addr, 0x6, 6) == 6) {
++		memcpy(&avila_npec_data.hwaddr, mac_addr, ETH_ALEN);
++	}
++
++	/* Read the first 6 bytes of the model number */
++	if (at24_mem_acc->read(at24_mem_acc, model, 0x20, 6) == 6) {
++		avila_info = avila_find_board_info(model);
++	}
++
++}
++
++static struct at24_platform_data avila_eeprom_info = {
++	.byte_len	= 1024,
++	.page_size	= 16,
++//	.flags		= AT24_FLAG_READONLY,
++	.setup		= at24_setup,
++};
++
++static struct pca953x_platform_data avila_pca_data = {
++	.gpio_base  = 100,
++};
++
++static struct i2c_board_info __initdata avila_i2c_board_info[] = {
++	{
++		I2C_BOARD_INFO("ds1672", 0x68),
++	},
++	{
++		I2C_BOARD_INFO("gsp", 0x29),
++	},
++	{
++		I2C_BOARD_INFO("pca9555", 0x23),
++		.platform_data = &avila_pca_data,
++	},
++	{
++		I2C_BOARD_INFO("ad7418", 0x28),
++	},
++	{
++		I2C_BOARD_INFO("24c08", 0x51),
++		.platform_data	= &avila_eeprom_info
++	},
++	{
++		I2C_BOARD_INFO("tlv320aic33", 0x1b),
++	},
++	{
++		I2C_BOARD_INFO("tlv320aic33", 0x1a),
++	},
++	{
++		I2C_BOARD_INFO("tlv320aic33", 0x19),
++	},
++	{
++		I2C_BOARD_INFO("tlv320aic33", 0x18),
++	},
++};
++
++static void __init avila_init(void)
++{
++	ixp4xx_sys_init();
++
++	platform_add_devices(avila_devices, ARRAY_SIZE(avila_devices));
++
++	i2c_register_board_info(0, avila_i2c_board_info,
++			ARRAY_SIZE(avila_i2c_board_info));
++}
++
++static int __init avila_model_setup(void)
++{
++	if (!machine_is_avila())
++		return 0;
++
++	/* default 16MB flash */
++	avila_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
++	avila_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + SZ_16M - 1;
++
++	if (avila_info) {
++		printk(KERN_DEBUG "Running on Gateworks Avila %s\n",
++							avila_info->model);
++		avila_info->setup();
++	} else {
++		printk(KERN_INFO "Unknown/missing Avila model number"
++						" -- defaults will be used\n");
++		avila_gw23xx_setup();
++	}
++	platform_device_register(&avila_flash);
+ 
++	return 0;
+ }
++late_initcall(avila_model_setup);
+ 
+ MACHINE_START(AVILA, "Gateworks Avila Network Platform")
+ 	/* Maintainer: Deepak Saxena <dsaxena@plexity.net> */
diff --git a/target/linux/ixp4xx/patches-4.1/304-ixp4xx_eth_jumboframe.patch b/target/linux/ixp4xx/patches-4.1/304-ixp4xx_eth_jumboframe.patch
new file mode 100644
index 0000000..b16086b
--- /dev/null
+++ b/target/linux/ixp4xx/patches-4.1/304-ixp4xx_eth_jumboframe.patch
@@ -0,0 +1,80 @@
+--- a/drivers/net/ethernet/xscale/ixp4xx_eth.c
++++ b/drivers/net/ethernet/xscale/ixp4xx_eth.c
+@@ -57,7 +57,7 @@
+ 
+ #define POOL_ALLOC_SIZE		(sizeof(struct desc) * (RX_DESCS + TX_DESCS))
+ #define REGS_SIZE		0x1000
+-#define MAX_MRU			1536 /* 0x600 */
++#define MAX_MRU			(14320 - ETH_HLEN - ETH_FCS_LEN)
+ #define RX_BUFF_SIZE		ALIGN((NET_IP_ALIGN) + MAX_MRU, 4)
+ 
+ #define NAPI_WEIGHT		16
+@@ -1315,6 +1315,32 @@ static void destroy_queues(struct port *
+ 	}
+ }
+ 
++static int eth_do_change_mtu(struct net_device *dev, int mtu)
++{
++	struct port *port;
++	struct msg msg;
++	/* adjust for ethernet headers */
++	int framesize = mtu + ETH_HLEN + ETH_FCS_LEN;
++
++	port = netdev_priv(dev);
++
++	memset(&msg, 0, sizeof(msg));
++	msg.cmd = NPE_SETMAXFRAMELENGTHS;
++	msg.eth_id = port->id;
++
++	/* max rx/tx 64 byte blocks */
++	msg.byte2 = ((framesize + 63) / 64) << 8;
++	msg.byte3 = ((framesize + 63) / 64) << 8;
++
++	msg.byte4 = msg.byte6 = framesize >> 8;
++	msg.byte5 = msg.byte7 = framesize & 0xff;
++
++	if (npe_send_recv_message(port->npe, &msg, "ETH_SET_MAX_FRAME_LENGTH"))
++		return -EIO;
++
++	return 0;
++}
++
+ static int eth_open(struct net_device *dev)
+ {
+ 	struct port *port = netdev_priv(dev);
+@@ -1366,6 +1392,8 @@ static int eth_open(struct net_device *d
+ 	if (npe_send_recv_message(port->npe, &msg, "ETH_SET_FIREWALL_MODE"))
+ 		return -EIO;
+ 
++	eth_do_change_mtu(dev, dev->mtu);
++
+ 	if ((err = request_queues(port)) != 0)
+ 		return err;
+ 
+@@ -1505,7 +1533,26 @@ static int eth_close(struct net_device *
+ 	return 0;
+ }
+ 
++static int ixp_eth_change_mtu(struct net_device *dev, int mtu)
++{
++	int ret;
++
++	if (mtu > MAX_MRU)
++		return -EINVAL;
++
++	if (dev->flags & IFF_UP) {
++		ret = eth_do_change_mtu(dev, mtu);
++		if (ret < 0)
++			return ret;
++	}
++
++	dev->mtu = mtu;
++
++	return 0;
++}
++
+ static const struct net_device_ops ixp4xx_netdev_ops = {
++	.ndo_change_mtu = ixp_eth_change_mtu,
+ 	.ndo_open = eth_open,
+ 	.ndo_stop = eth_close,
+ 	.ndo_start_xmit = eth_xmit,
diff --git a/target/linux/ixp4xx/patches-4.1/310-gtwx5717_spi_bus.patch b/target/linux/ixp4xx/patches-4.1/310-gtwx5717_spi_bus.patch
new file mode 100644
index 0000000..080b96a
--- /dev/null
+++ b/target/linux/ixp4xx/patches-4.1/310-gtwx5717_spi_bus.patch
@@ -0,0 +1,52 @@
+--- a/arch/arm/mach-ixp4xx/gtwx5715-setup.c
++++ b/arch/arm/mach-ixp4xx/gtwx5715-setup.c
+@@ -27,6 +27,7 @@
+ #include <linux/serial.h>
+ #include <linux/tty.h>
+ #include <linux/serial_8250.h>
++#include <linux/spi/spi_gpio_old.h>
+ #include <asm/types.h>
+ #include <asm/setup.h>
+ #include <asm/memory.h>
+@@ -146,9 +147,41 @@ static struct platform_device gtwx5715_f
+ 	.resource	= &gtwx5715_flash_resource,
+ };
+ 
++static int gtwx5715_spi_boardinfo_setup(struct spi_board_info *bi,
++		struct spi_master *master, void *data)
++{
++
++	strlcpy(bi->modalias, "spi-ks8995", sizeof(bi->modalias));
++
++	bi->max_speed_hz = 5000000 /* Hz */;
++	bi->bus_num = master->bus_num;
++	bi->mode = SPI_MODE_0;
++
++	return 0;
++}
++
++static struct spi_gpio_platform_data gtwx5715_spi_bus_data = {
++	.pin_cs			= GTWX5715_KSSPI_SELECT,
++	.pin_clk		= GTWX5715_KSSPI_CLOCK,
++	.pin_miso		= GTWX5715_KSSPI_RXD,
++	.pin_mosi		= GTWX5715_KSSPI_TXD,
++	.cs_activelow		= 1,
++	.no_spi_delay		= 1,
++	.boardinfo_setup	= gtwx5715_spi_boardinfo_setup,
++};
++
++static struct platform_device gtwx5715_spi_bus = {
++	.name		= "spi-gpio",
++	.id		= 0,
++	.dev		= {
++		.platform_data = &gtwx5715_spi_bus_data,
++	},
++};
++
+ static struct platform_device *gtwx5715_devices[] __initdata = {
+ 	&gtwx5715_uart_device,
+ 	&gtwx5715_flash,
++	&gtwx5715_spi_bus,
+ };
+ 
+ static void __init gtwx5715_init(void)
diff --git a/target/linux/ixp4xx/patches-4.1/311-gtwx5717_mac_plat_info.patch b/target/linux/ixp4xx/patches-4.1/311-gtwx5717_mac_plat_info.patch
new file mode 100644
index 0000000..aa7a9e0
--- /dev/null
+++ b/target/linux/ixp4xx/patches-4.1/311-gtwx5717_mac_plat_info.patch
@@ -0,0 +1,50 @@
+--- a/arch/arm/mach-ixp4xx/gtwx5715-setup.c
++++ b/arch/arm/mach-ixp4xx/gtwx5715-setup.c
+@@ -28,6 +28,7 @@
+ #include <linux/tty.h>
+ #include <linux/serial_8250.h>
+ #include <linux/spi/spi_gpio_old.h>
++#include <linux/dma-mapping.h>
+ #include <asm/types.h>
+ #include <asm/setup.h>
+ #include <asm/memory.h>
+@@ -178,10 +179,39 @@ static struct platform_device gtwx5715_s
+ 	},
+ };
+ 
++static struct eth_plat_info gtwx5715_npeb_data = {
++	.phy		= IXP4XX_ETH_PHY_MAX_ADDR,
++	.phy_mask	= 0x1e, /* ports 1-4 of the KS8995 switch */
++	.rxq		= 3,
++	.txreadyq	= 20,
++};
++
++static struct eth_plat_info gtwx5715_npec_data = {
++	.phy		= 5,	/* port 5 of the KS8995 switch */
++	.rxq		= 4,
++	.txreadyq	= 21,
++};
++
++static struct platform_device gtwx5715_npeb_device = {
++	.name			= "ixp4xx_eth",
++	.id			= IXP4XX_ETH_NPEB,
++	.dev.platform_data	= &gtwx5715_npeb_data,
++	.dev.coherent_dma_mask	= DMA_BIT_MASK(32),
++};
++
++static struct platform_device gtwx5715_npec_device = {
++	.name			= "ixp4xx_eth",
++	.id			= IXP4XX_ETH_NPEC,
++	.dev.platform_data	= &gtwx5715_npec_data,
++	.dev.coherent_dma_mask	= DMA_BIT_MASK(32),
++};
++
+ static struct platform_device *gtwx5715_devices[] __initdata = {
+ 	&gtwx5715_uart_device,
+ 	&gtwx5715_flash,
+ 	&gtwx5715_spi_bus,
++	&gtwx5715_npeb_device,
++	&gtwx5715_npec_device,
+ };
+ 
+ static void __init gtwx5715_init(void)
diff --git a/target/linux/ixp4xx/patches-4.1/312-ixp4xx_pata_optimization.patch b/target/linux/ixp4xx/patches-4.1/312-ixp4xx_pata_optimization.patch
new file mode 100644
index 0000000..59c2837
--- /dev/null
+++ b/target/linux/ixp4xx/patches-4.1/312-ixp4xx_pata_optimization.patch
@@ -0,0 +1,137 @@
+--- a/drivers/ata/pata_ixp4xx_cf.c
++++ b/drivers/ata/pata_ixp4xx_cf.c
+@@ -24,16 +24,58 @@
+ #include <scsi/scsi_host.h>
+ 
+ #define DRV_NAME	"pata_ixp4xx_cf"
+-#define DRV_VERSION	"0.2"
++#define DRV_VERSION	"0.3"
+ 
+ static int ixp4xx_set_mode(struct ata_link *link, struct ata_device **error)
+ {
++	struct ixp4xx_pata_data *data = link->ap->host->dev->platform_data;
++	unsigned int pio_mask;
+ 	struct ata_device *dev;
+ 
+ 	ata_for_each_dev(dev, link, ENABLED) {
+-		ata_dev_info(dev, "configured for PIO0\n");
+-		dev->pio_mode = XFER_PIO_0;
+-		dev->xfer_mode = XFER_PIO_0;
++		if (dev->id[ATA_ID_FIELD_VALID] & (1 << 1)) {
++			pio_mask = dev->id[ATA_ID_PIO_MODES] & 0x03;
++			if (pio_mask & (1 << 1)) {
++				pio_mask = 4;
++			} else {
++				pio_mask = 3;
++			}
++		} else {
++			pio_mask = (dev->id[ATA_ID_OLD_PIO_MODES] >> 8);
++		}
++
++		switch (pio_mask){
++			case 0:
++				ata_dev_printk(dev, KERN_INFO, "configured for PIO0\n");
++				dev->pio_mode = XFER_PIO_0;
++				dev->xfer_mode = XFER_PIO_0;
++				*data->cs0_cfg = 0x8a473c03;
++				break;
++			case 1:
++				ata_dev_printk(dev, KERN_INFO, "configured for PIO1\n");
++				dev->pio_mode = XFER_PIO_1;
++				dev->xfer_mode = XFER_PIO_1;
++				*data->cs0_cfg = 0x86433c03;
++				break;
++			case 2:
++				ata_dev_printk(dev, KERN_INFO, "configured for PIO2\n");
++				dev->pio_mode = XFER_PIO_2;
++				dev->xfer_mode = XFER_PIO_2;
++				*data->cs0_cfg = 0x82413c03;
++				break;
++			case 3:
++				ata_dev_printk(dev, KERN_INFO, "configured for PIO3\n");
++				dev->pio_mode = XFER_PIO_3;
++				dev->xfer_mode = XFER_PIO_3;
++				*data->cs0_cfg = 0x80823c03;
++				break;
++			case 4:
++				ata_dev_printk(dev, KERN_INFO, "configured for PIO4\n");
++				dev->pio_mode = XFER_PIO_4;
++				dev->xfer_mode = XFER_PIO_4;
++				*data->cs0_cfg = 0x80403c03;
++				break;
++		}
+ 		dev->xfer_shift = ATA_SHIFT_PIO;
+ 		dev->flags |= ATA_DFLAG_PIO;
+ 	}
+@@ -46,6 +88,7 @@ static unsigned int ixp4xx_mmio_data_xfe
+ 	unsigned int i;
+ 	unsigned int words = buflen >> 1;
+ 	u16 *buf16 = (u16 *) buf;
++	unsigned int pio_mask;
+ 	struct ata_port *ap = dev->link->ap;
+ 	void __iomem *mmio = ap->ioaddr.data_addr;
+ 	struct ixp4xx_pata_data *data = dev_get_platdata(ap->host->dev);
+@@ -53,8 +96,34 @@ static unsigned int ixp4xx_mmio_data_xfe
+ 	/* set the expansion bus in 16bit mode and restore
+ 	 * 8 bit mode after the transaction.
+ 	 */
+-	*data->cs0_cfg &= ~(0x01);
+-	udelay(100);
++	if (dev->id[ATA_ID_FIELD_VALID] & (1 << 1)){
++		pio_mask = dev->id[ATA_ID_PIO_MODES] & 0x03;
++		if (pio_mask & (1 << 1)){
++			pio_mask = 4;
++		}else{
++			pio_mask = 3;
++		}
++	}else{
++		pio_mask = (dev->id[ATA_ID_OLD_PIO_MODES] >> 8);
++	}
++	switch (pio_mask){
++		case 0:
++			*data->cs0_cfg = 0xa9643c42;
++		break;
++		case 1:
++			*data->cs0_cfg = 0x85033c42;
++		break;
++		case 2:
++			*data->cs0_cfg = 0x80b23c42;
++		break;
++		case 3:
++			*data->cs0_cfg = 0x80823c42;
++		break;
++		case 4:
++			*data->cs0_cfg = 0x80403c42;
++		break;
++	}
++	udelay(5);
+ 
+ 	/* Transfer multiple of 2 bytes */
+ 	if (rw == READ)
+@@ -79,8 +148,24 @@ static unsigned int ixp4xx_mmio_data_xfe
+ 		words++;
+ 	}
+ 
+-	udelay(100);
+-	*data->cs0_cfg |= 0x01;
++	udelay(5);
++	switch (pio_mask){
++		case 0:
++			*data->cs0_cfg = 0x8a473c03;
++		break;
++		case 1:
++			*data->cs0_cfg = 0x86433c03;
++		break;
++		case 2:
++			*data->cs0_cfg = 0x82413c03;
++		break;
++		case 3:
++			*data->cs0_cfg = 0x80823c03;
++		break;
++		case 4:
++			*data->cs0_cfg = 0x80403c03;
++		break;
++	}
+ 
+ 	return words << 1;
+ }
diff --git a/target/linux/ixp4xx/patches-4.1/500-usr8200_support.patch b/target/linux/ixp4xx/patches-4.1/500-usr8200_support.patch
new file mode 100644
index 0000000..fb7f03e
--- /dev/null
+++ b/target/linux/ixp4xx/patches-4.1/500-usr8200_support.patch
@@ -0,0 +1,347 @@
+--- a/arch/arm/mach-ixp4xx/Kconfig
++++ b/arch/arm/mach-ixp4xx/Kconfig
+@@ -93,6 +93,14 @@ config MACH_SIDEWINDER
+ 	  Engineering Sidewinder board. For more information on this
+ 	  platform, see http://www.adiengineering.com
+ 
++config MACH_USR8200
++	bool "USRobotics USR8200"
++	select PCI
++	help
++	  Say 'Y' here if you want your kernel to support the USRobotics
++	  USR8200 router board. For more information on this platform, see
++	  http://openwrt.org
++
+ config MACH_COMPEXWP18
+ 	bool "Compex WP18 / NP18A"
+ 	select PCI
+--- a/arch/arm/mach-ixp4xx/Makefile
++++ b/arch/arm/mach-ixp4xx/Makefile
+@@ -27,6 +27,7 @@ obj-pci-$(CONFIG_MACH_WRT300NV2)		+= wrt
+ obj-pci-$(CONFIG_MACH_AP1000)		+= ixdp425-pci.o
+ obj-pci-$(CONFIG_MACH_TW5334)		+= tw5334-pci.o
+ obj-pci-$(CONFIG_MACH_MI424WR)		+= mi424wr-pci.o
++obj-pci-$(CONFIG_MACH_USR8200)		+= usr8200-pci.o
+ 
+ obj-y	+= common.o
+ 
+@@ -55,6 +56,7 @@ obj-$(CONFIG_MACH_WRT300NV2)	+= wrt300nv
+ obj-$(CONFIG_MACH_AP1000)	+= ap1000-setup.o
+ obj-$(CONFIG_MACH_TW5334)	+= tw5334-setup.o
+ obj-$(CONFIG_MACH_MI424WR)	+= mi424wr-setup.o
++obj-$(CONFIG_MACH_USR8200)	+= usr8200-setup.o
+ 
+ obj-$(CONFIG_PCI)		+= $(obj-pci-$(CONFIG_PCI)) common-pci.o
+ obj-$(CONFIG_IXP4XX_QMGR)	+= ixp4xx_qmgr.o
+--- a/arch/arm/mach-ixp4xx/include/mach/uncompress.h
++++ b/arch/arm/mach-ixp4xx/include/mach/uncompress.h
+@@ -44,7 +44,8 @@ static __inline__ void __arch_decomp_set
+ 	    machine_is_gateway7001() || machine_is_wg302v2() ||
+ 	    machine_is_devixp() || machine_is_miccpt() || machine_is_mic256() ||
+ 	    machine_is_pronghorn() || machine_is_pronghorn_metro() ||
+-	    machine_is_wrt300nv2() || machine_is_tw5334())
++	    machine_is_wrt300nv2() || machine_is_tw5334() ||
++	    machine_is_usr8200())
+ 		uart_base = (volatile u32*) IXP4XX_UART2_BASE_PHYS;
+ 	else
+ 		uart_base = (volatile u32*) IXP4XX_UART1_BASE_PHYS;
+--- /dev/null
++++ b/arch/arm/mach-ixp4xx/usr8200-pci.c
+@@ -0,0 +1,77 @@
++/*
++ * arch/arch/mach-ixp4xx/usr8200-pci.c
++ *
++ * PCI setup routines for USRobotics USR8200
++ *
++ * Copyright (C) 2008 Peter Denison <openwrt@marshadder.org>
++ *
++ * based on pronghorn-pci.c
++ * 	Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
++ * based on coyote-pci.c:
++ *	Copyright (C) 2002 Jungo Software Technologies.
++ *	Copyright (C) 2003 MontaVista Softwrae, Inc.
++ *
++ * Maintainer: Peter Denison <openwrt@marshadder.org>
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ *
++ */
++
++#include <linux/kernel.h>
++#include <linux/pci.h>
++#include <linux/init.h>
++#include <linux/irq.h>
++
++#include <asm/mach-types.h>
++#include <mach/hardware.h>
++
++#include <asm/mach/pci.h>
++
++void __init usr8200_pci_preinit(void)
++{
++	irq_set_irq_type(IRQ_IXP4XX_GPIO7, IRQ_TYPE_LEVEL_LOW);
++	irq_set_irq_type(IRQ_IXP4XX_GPIO8, IRQ_TYPE_LEVEL_LOW);
++	irq_set_irq_type(IRQ_IXP4XX_GPIO9, IRQ_TYPE_LEVEL_LOW);
++	irq_set_irq_type(IRQ_IXP4XX_GPIO10, IRQ_TYPE_LEVEL_LOW);
++	irq_set_irq_type(IRQ_IXP4XX_GPIO11, IRQ_TYPE_LEVEL_LOW);
++
++	ixp4xx_pci_preinit();
++}
++
++static int __init usr8200_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
++{
++	if (slot == 14)
++		return IRQ_IXP4XX_GPIO7;
++	else if (slot == 15)
++		return IRQ_IXP4XX_GPIO8;
++	else if (slot == 16) {
++		if (pin == 1)
++			return IRQ_IXP4XX_GPIO11;
++		else if (pin == 2)
++			return IRQ_IXP4XX_GPIO10;
++		else if (pin == 3)
++			return IRQ_IXP4XX_GPIO9;
++		else
++			return -1;
++	} else
++		return -1;
++}
++
++struct hw_pci usr8200_pci __initdata = {
++	.nr_controllers	= 1,
++	.preinit	= usr8200_pci_preinit,
++	.ops		= &ixp4xx_ops,
++	.setup		= ixp4xx_setup,
++	.map_irq	= usr8200_map_irq,
++};
++
++int __init usr8200_pci_init(void)
++{
++	if (machine_is_usr8200())
++		pci_common_init(&usr8200_pci);
++	return 0;
++}
++
++subsys_initcall(usr8200_pci_init);
+--- /dev/null
++++ b/arch/arm/mach-ixp4xx/usr8200-setup.c
+@@ -0,0 +1,217 @@
++/*
++ * arch/arm/mach-ixp4xx/usr8200-setup.c
++ *
++ * Board setup for the USRobotics USR8200
++ *
++ * Copyright (C) 2008 Peter Denison <openwrt@marshadder.org>
++ *
++ * based on pronghorn-setup.c:
++ * 	Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
++ * based on coyote-setup.c:
++ *      Copyright (C) 2003-2005 MontaVista Software, Inc.
++ *
++ * Author: Peter Denison <openwrt@marshadder.org>
++ */
++
++#include <linux/kernel.h>
++#include <linux/init.h>
++#include <linux/device.h>
++#include <linux/serial.h>
++#include <linux/tty.h>
++#include <linux/serial_8250.h>
++#include <linux/slab.h>
++#include <linux/types.h>
++#include <linux/memory.h>
++#include <linux/i2c-gpio.h>
++#include <linux/leds.h>
++#include <linux/dma-mapping.h>
++
++#include <asm/setup.h>
++#include <mach/hardware.h>
++#include <asm/irq.h>
++#include <asm/mach-types.h>
++#include <asm/mach/arch.h>
++#include <asm/mach/flash.h>
++
++static struct flash_platform_data usr8200_flash_data = {
++	.map_name	= "cfi_probe",
++	.width		= 2,
++};
++
++static struct resource usr8200_flash_resource = {
++	.flags		= IORESOURCE_MEM,
++};
++
++static struct platform_device usr8200_flash = {
++	.name		= "IXP4XX-Flash",
++	.id		= 0,
++	.dev		= {
++		.platform_data	= &usr8200_flash_data,
++	},
++	.num_resources	= 1,
++	.resource	= &usr8200_flash_resource,
++};
++
++static struct resource usr8200_uart_resources [] = {
++	{
++		.start		= IXP4XX_UART2_BASE_PHYS,
++		.end		= IXP4XX_UART2_BASE_PHYS + 0x0fff,
++		.flags		= IORESOURCE_MEM
++	},
++	{
++		.start		= IXP4XX_UART1_BASE_PHYS,
++		.end		= IXP4XX_UART1_BASE_PHYS + 0x0fff,
++		.flags		= IORESOURCE_MEM
++	}
++};
++
++static struct plat_serial8250_port usr8200_uart_data[] = {
++	{
++		.mapbase	= IXP4XX_UART2_BASE_PHYS,
++		.membase	= (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
++		.irq		= IRQ_IXP4XX_UART2,
++		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
++		.iotype		= UPIO_MEM,
++		.regshift	= 2,
++		.uartclk	= IXP4XX_UART_XTAL,
++	},
++	{
++		.mapbase	= IXP4XX_UART1_BASE_PHYS,
++		.membase	= (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET,
++		.irq		= IRQ_IXP4XX_UART1,
++		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
++		.iotype		= UPIO_MEM,
++		.regshift	= 2,
++		.uartclk	= IXP4XX_UART_XTAL,
++	},
++	{ },
++};
++
++static struct platform_device usr8200_uart = {
++	.name		= "serial8250",
++	.id		= PLAT8250_DEV_PLATFORM,
++	.dev		= {
++		.platform_data	= usr8200_uart_data,
++	},
++	.num_resources	= 2,
++	.resource	= usr8200_uart_resources,
++};
++
++static struct gpio_led usr8200_led_pin[] = {
++	{
++		.name		= "usr8200:usb1",
++		.gpio		= 0,
++		.active_low	= 1,
++	},
++	{
++		.name		= "usr8200:usb2",
++		.gpio		= 1,
++		.active_low	= 1,
++	},
++	{
++		.name		= "usr8200:ieee1394",
++		.gpio		= 2,
++		.active_low	= 1,
++	},
++	{
++		.name		= "usr8200:internal",
++		.gpio		= 3,
++		.active_low	= 1,
++	},
++	{
++		.name		= "usr8200:power",
++		.gpio		= 14,
++	}
++};
++
++static struct gpio_led_platform_data usr8200_led_data = {
++	.num_leds		= ARRAY_SIZE(usr8200_led_pin),
++	.leds			= usr8200_led_pin,
++};
++
++static struct platform_device usr8200_led = {
++	.name			= "leds-gpio",
++	.id			= -1,
++	.dev.platform_data	= &usr8200_led_data,
++};
++
++static struct eth_plat_info usr8200_plat_eth[] = {
++	{ /* NPEC - LAN with Marvell 88E6060 switch */
++		.phy		= IXP4XX_ETH_PHY_MAX_ADDR,
++		.phy_mask	= 0x0F0000,
++		.rxq		= 4,
++		.txreadyq	= 21,
++	}, { /* NPEB - WAN */
++		.phy		= 9,
++		.rxq		= 3,
++		.txreadyq	= 20,
++	}
++};
++
++static struct platform_device usr8200_eth[] = {
++	{
++		.name			= "ixp4xx_eth",
++		.id			= IXP4XX_ETH_NPEC,
++		.dev.platform_data	= usr8200_plat_eth,
++		.dev.coherent_dma_mask	= DMA_BIT_MASK(32),
++	}, {
++		.name			= "ixp4xx_eth",
++		.id			= IXP4XX_ETH_NPEB,
++		.dev.platform_data	= usr8200_plat_eth + 1,
++		.dev.coherent_dma_mask	= DMA_BIT_MASK(32),
++	}
++};
++
++static struct resource usr8200_rtc_resources = {
++	.flags		= IORESOURCE_MEM
++};
++
++static struct platform_device usr8200_rtc = {
++	.name		= "rtc7301",
++	.id		= 0,
++	.num_resources	= 1,
++	.resource	= &usr8200_rtc_resources,
++};
++
++static struct platform_device *usr8200_devices[] __initdata = {
++	&usr8200_flash,
++	&usr8200_uart,
++	&usr8200_led,
++	&usr8200_eth[0],
++	&usr8200_eth[1],
++	&usr8200_rtc,
++};
++
++static void __init usr8200_init(void)
++{
++	ixp4xx_sys_init();
++
++	usr8200_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
++	usr8200_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + SZ_16M - 1;
++
++	usr8200_rtc_resources.start = IXP4XX_EXP_BUS_BASE(2);
++	usr8200_rtc_resources.end = IXP4XX_EXP_BUS_BASE(2) + 0x01ff;
++
++	*IXP4XX_EXP_CS0 |= IXP4XX_FLASH_WRITABLE;
++	*IXP4XX_EXP_CS2 = 0x3fff000 | IXP4XX_EXP_BUS_SIZE(0) | IXP4XX_EXP_BUS_WR_EN |
++	                  IXP4XX_EXP_BUS_CS_EN | IXP4XX_EXP_BUS_BYTE_EN;
++	*IXP4XX_GPIO_GPCLKR = 0x01100000;
++
++	/* configure button as input */
++	gpio_line_config(12, IXP4XX_GPIO_IN);
++
++	platform_add_devices(usr8200_devices, ARRAY_SIZE(usr8200_devices));
++}
++
++MACHINE_START(USR8200, "USRobotics USR8200")
++	/* Maintainer: Peter Denison <openwrt@marshadder.org> */
++	.map_io		= ixp4xx_map_io,
++	.init_irq	= ixp4xx_init_irq,
++	.init_time	= ixp4xx_timer_init,
++	.atag_offset	= 0x0100,
++	.init_machine	= usr8200_init,
++#if defined(CONFIG_PCI)
++	.dma_zone_size	= SZ_64M,
++#endif
++	.restart	= ixp4xx_restart,
++MACHINE_END
diff --git a/target/linux/ixp4xx/patches-4.1/520-tw2662_support.patch b/target/linux/ixp4xx/patches-4.1/520-tw2662_support.patch
new file mode 100644
index 0000000..7cea61f
--- /dev/null
+++ b/target/linux/ixp4xx/patches-4.1/520-tw2662_support.patch
@@ -0,0 +1,317 @@
+--- a/arch/arm/mach-ixp4xx/Kconfig
++++ b/arch/arm/mach-ixp4xx/Kconfig
+@@ -176,6 +176,15 @@ config ARCH_PRPMC1100
+ 	  PrPCM1100 Processor Mezanine Module. For more information on
+ 	  this platform, see <file:Documentation/arm/IXP4xx>.
+ 
++config MACH_TW2662
++        bool "Titan Wireless TW-266-2"
++        select PCI
++        help
++          Say 'Y' here if you want your kernel to support the Titan
++          Wireless TW266-2. For more information on this platform,
++          see http://openwrt.org
++
++
+ config MACH_TW5334
+ 	bool "Titan Wireless TW-533-4"
+ 	select PCI
+--- a/arch/arm/mach-ixp4xx/Makefile
++++ b/arch/arm/mach-ixp4xx/Makefile
+@@ -25,6 +25,7 @@ obj-pci-$(CONFIG_MACH_SIDEWINDER)	+= sid
+ obj-pci-$(CONFIG_MACH_COMPEXWP18)	+= ixdp425-pci.o
+ obj-pci-$(CONFIG_MACH_WRT300NV2)		+= wrt300nv2-pci.o
+ obj-pci-$(CONFIG_MACH_AP1000)		+= ixdp425-pci.o
++obj-pci-$(CONFIG_MACH_TW2662)		+= tw2662-pci.o
+ obj-pci-$(CONFIG_MACH_TW5334)		+= tw5334-pci.o
+ obj-pci-$(CONFIG_MACH_MI424WR)		+= mi424wr-pci.o
+ obj-pci-$(CONFIG_MACH_USR8200)		+= usr8200-pci.o
+@@ -54,6 +55,7 @@ obj-$(CONFIG_MACH_SIDEWINDER)	+= sidewin
+ obj-$(CONFIG_MACH_COMPEXWP18)	+= compex42x-setup.o
+ obj-$(CONFIG_MACH_WRT300NV2)	+= wrt300nv2-setup.o
+ obj-$(CONFIG_MACH_AP1000)	+= ap1000-setup.o
++obj-$(CONFIG_MACH_TW2662)	+= tw2662-setup.o
+ obj-$(CONFIG_MACH_TW5334)	+= tw5334-setup.o
+ obj-$(CONFIG_MACH_MI424WR)	+= mi424wr-setup.o
+ obj-$(CONFIG_MACH_USR8200)	+= usr8200-setup.o
+--- a/arch/arm/mach-ixp4xx/include/mach/uncompress.h
++++ b/arch/arm/mach-ixp4xx/include/mach/uncompress.h
+@@ -45,7 +45,7 @@ static __inline__ void __arch_decomp_set
+ 	    machine_is_devixp() || machine_is_miccpt() || machine_is_mic256() ||
+ 	    machine_is_pronghorn() || machine_is_pronghorn_metro() ||
+ 	    machine_is_wrt300nv2() || machine_is_tw5334() ||
+-	    machine_is_usr8200())
++	    machine_is_usr8200() || machine_is_tw2662())
+ 		uart_base = (volatile u32*) IXP4XX_UART2_BASE_PHYS;
+ 	else
+ 		uart_base = (volatile u32*) IXP4XX_UART1_BASE_PHYS;
+--- /dev/null
++++ b/arch/arm/mach-ixp4xx/tw2662-pci.c
+@@ -0,0 +1,67 @@
++/*
++ * arch/arm/mach-ixp4xx/tw2662-pci.c
++ *
++ * PCI setup routines for Tiran Wireless TW-266-2 platform
++ *
++ * Copyright (C) 2002 Jungo Software Technologies.
++ * Copyright (C) 2003 MontaVista Softwrae, Inc.
++ * Copyright (C) 2010 Alexandros C. Couloumbis <alex@ozo.com>
++ * Copyright (C) 2010 Gabor Juhos <juhosg@openwrt.org>
++ *
++ * Maintainer: Deepak Saxena <dsaxena@mvista.com>
++ * Maintainer: Alexandros C. Couloumbis <alex@ozo.com>
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ *
++ */
++
++#include <linux/kernel.h>
++#include <linux/pci.h>
++#include <linux/init.h>
++#include <linux/irq.h>
++#include <asm/mach-types.h>
++#include <mach/hardware.h>
++#include <asm/irq.h>
++#include <asm/mach/pci.h>
++
++#define SLOT0_DEVID	1
++#define SLOT1_DEVID	3
++
++/* PCI controller GPIO to IRQ pin mappings */
++#define SLOT0_INTA	11
++#define SLOT1_INTA	9
++
++void __init tw2662_pci_preinit(void)
++{
++	irq_set_irq_type(IXP4XX_GPIO_IRQ(SLOT0_INTA), IRQ_TYPE_LEVEL_LOW);
++	irq_set_irq_type(IXP4XX_GPIO_IRQ(SLOT1_INTA), IRQ_TYPE_LEVEL_LOW);
++	ixp4xx_pci_preinit();
++}
++
++static int __init tw2662_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
++{
++	if (slot == SLOT0_DEVID)
++		return IXP4XX_GPIO_IRQ(SLOT0_INTA);
++	else if (slot == SLOT1_DEVID)
++		return IXP4XX_GPIO_IRQ(SLOT1_INTA);
++	else return -1;
++}
++
++struct hw_pci tw2662_pci __initdata = {
++	.nr_controllers = 1,
++	.preinit =        tw2662_pci_preinit,
++	.ops =            &ixp4xx_ops,
++	.setup =          ixp4xx_setup,
++	.map_irq =        tw2662_map_irq,
++};
++
++int __init tw2662_pci_init(void)
++{
++        if (machine_is_tw2662())
++		pci_common_init(&tw2662_pci);
++        return 0;
++}
++
++subsys_initcall(tw2662_pci_init);
+--- /dev/null
++++ b/arch/arm/mach-ixp4xx/tw2662-setup.c
+@@ -0,0 +1,197 @@
++/*
++ * arch/arm/mach-ixp4xx/tw2662-setup.c
++ *
++ * Titan Wireless TW-266-2
++ *
++ * Copyright (C) 2010 Gabor Juhos <juhosg@openwrt.org>
++ * Copyright (C) 2010 Alexandros C. Couloumbis <alex@ozo.com>
++ *
++ * based on ap1000-setup.c:
++ * 	Author: Imre Kaloz <Kaloz@openwrt.org>
++ */
++
++#include <linux/if_ether.h>
++#include <linux/kernel.h>
++#include <linux/init.h>
++#include <linux/device.h>
++#include <linux/serial.h>
++#include <linux/tty.h>
++#include <linux/serial_8250.h>
++#include <linux/slab.h>
++#include <linux/netdevice.h>
++#include <linux/etherdevice.h>
++#include <linux/platform_device.h>
++
++#include <asm/io.h>
++#include <asm/types.h>
++#include <asm/setup.h>
++#include <asm/memory.h>
++#include <mach/hardware.h>
++#include <asm/mach-types.h>
++#include <asm/irq.h>
++#include <asm/mach/arch.h>
++#include <asm/mach/flash.h>
++
++/* gpio mask used by platform device */
++#define TW2662_GPIO_MASK        (1 << 1) | (1 << 3) | (1 << 5) | (1 << 7)
++
++static struct flash_platform_data tw2662_flash_data = {
++	.map_name	= "cfi_probe",
++	.width		= 2,
++};
++
++static struct resource tw2662_flash_resource = {
++	.flags		= IORESOURCE_MEM,
++};
++
++static struct platform_device tw2662_flash = {
++	.name		= "IXP4XX-Flash",
++	.id		= 0,
++	.dev		= {
++		.platform_data = &tw2662_flash_data,
++	},
++	.num_resources	= 1,
++	.resource	= &tw2662_flash_resource,
++};
++
++static struct resource tw2662_uart_resources[] = {
++	{
++		.start		= IXP4XX_UART1_BASE_PHYS,
++		.end		= IXP4XX_UART1_BASE_PHYS + 0x0fff,
++		.flags		= IORESOURCE_MEM
++	},
++	{
++		.start		= IXP4XX_UART2_BASE_PHYS,
++		.end		= IXP4XX_UART2_BASE_PHYS + 0x0fff,
++		.flags		= IORESOURCE_MEM
++	}
++};
++
++static struct plat_serial8250_port tw2662_uart_data[] = {
++	{
++		.mapbase	= IXP4XX_UART1_BASE_PHYS,
++		.membase	= (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET,
++		.irq		= IRQ_IXP4XX_UART1,
++		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
++		.iotype		= UPIO_MEM,
++		.regshift	= 2,
++		.uartclk	= IXP4XX_UART_XTAL,
++	},
++	{
++		.mapbase	= IXP4XX_UART2_BASE_PHYS,
++		.membase	= (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
++		.irq		= IRQ_IXP4XX_UART2,
++		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
++		.iotype		= UPIO_MEM,
++		.regshift	= 2,
++		.uartclk	= IXP4XX_UART_XTAL,
++	},
++	{ },
++};
++
++static struct platform_device tw2662_uart = {
++	.name			= "serial8250",
++	.id			= PLAT8250_DEV_PLATFORM,
++	.dev.platform_data	= tw2662_uart_data,
++	.num_resources		= 2,
++	.resource		= tw2662_uart_resources
++};
++
++/* Built-in 10/100 Ethernet MAC interfaces */
++static struct eth_plat_info tw2662_plat_eth[] = {
++        {
++                .phy            = 3,
++                .rxq            = 3,
++                .txreadyq       = 20,
++        }, {
++                .phy            = 1,
++                .rxq            = 4,
++                .txreadyq       = 21,
++        }
++};
++
++static struct platform_device tw2662_eth[] = {
++	{
++		.name			= "ixp4xx_eth",
++		.id			= IXP4XX_ETH_NPEB,
++		.dev.platform_data	= tw2662_plat_eth,
++		.dev.coherent_dma_mask	= DMA_BIT_MASK(32),
++	}, {
++		.name			= "ixp4xx_eth",
++		.id			= IXP4XX_ETH_NPEC,
++		.dev.platform_data	= tw2662_plat_eth + 1,
++		.dev.coherent_dma_mask	= DMA_BIT_MASK(32),
++	}
++};
++
++
++static struct platform_device *tw2662_devices[] __initdata = {
++	&tw2662_flash,
++	&tw2662_uart,
++	&tw2662_eth[0],
++	&tw2662_eth[1],
++};
++
++static char tw2662_mem_fixup[] __initdata = "mem=64M ";
++
++static void __init tw2662_fixup(struct tag *tags, char **cmdline,
++				struct meminfo *mi)
++{
++	struct tag *t = tags;
++	char *p = *cmdline;
++
++	/* Find the end of the tags table, taking note of any cmdline tag. */
++	for (; t->hdr.size; t = tag_next(t)) {
++		if (t->hdr.tag == ATAG_CMDLINE) {
++			p = t->u.cmdline.cmdline;
++		}
++	}
++
++	/* Overwrite the end of the table with a new cmdline tag. */
++	t->hdr.tag = ATAG_CMDLINE;
++	t->hdr.size = (sizeof (struct tag_header) +
++		strlen(tw2662_mem_fixup) + strlen(p) + 1 + 4) >> 2;
++	strlcpy(t->u.cmdline.cmdline, tw2662_mem_fixup, COMMAND_LINE_SIZE);
++	strlcpy(t->u.cmdline.cmdline + strlen(tw2662_mem_fixup), p,
++		COMMAND_LINE_SIZE - strlen(tw2662_mem_fixup));
++
++	/* Terminate the table. */
++	t = tag_next(t);
++	t->hdr.tag = ATAG_NONE;
++	t->hdr.size = 0;
++}
++
++static void __init tw2662_init(void)
++{
++	ixp4xx_sys_init();
++
++	tw2662_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
++	tw2662_flash_resource.end =
++		IXP4XX_EXP_BUS_BASE(0) + ixp4xx_exp_bus_size - 1;
++
++	platform_add_devices(tw2662_devices, ARRAY_SIZE(tw2662_devices));
++
++	if (!(is_valid_ether_addr(tw2662_plat_eth[0].hwaddr)))
++		random_ether_addr(tw2662_plat_eth[0].hwaddr);
++	if (!(is_valid_ether_addr(tw2662_plat_eth[1].hwaddr))) {
++		memcpy(tw2662_plat_eth[1].hwaddr, tw2662_plat_eth[0].hwaddr, ETH_ALEN);
++		tw2662_plat_eth[1].hwaddr[5] = (tw2662_plat_eth[0].hwaddr[5] + 1);
++	}
++
++}
++
++#ifdef CONFIG_MACH_TW2662
++MACHINE_START(TW2662, "Titan Wireless TW-266-2")
++	/* Maintainer: Alexandros C. Couloumbis <alex@ozo.com> */
++	.fixup		= tw2662_fixup,
++	.map_io		= ixp4xx_map_io,
++	.init_irq	= ixp4xx_init_irq,
++	.init_time	= ixp4xx_timer_init,
++	.atag_offset	= 0x0100,
++	.init_machine	= tw2662_init,
++#if defined(CONFIG_PCI)
++	.dma_zone_size	= SZ_64M,
++#endif
++	.restart	= ixp4xx_restart,
++MACHINE_END
++#endif
diff --git a/target/linux/ixp4xx/patches-4.1/530-ap42x_support.patch b/target/linux/ixp4xx/patches-4.1/530-ap42x_support.patch
new file mode 100644
index 0000000..1afbe3d
--- /dev/null
+++ b/target/linux/ixp4xx/patches-4.1/530-ap42x_support.patch
@@ -0,0 +1,282 @@
+--- a/arch/arm/mach-ixp4xx/Kconfig
++++ b/arch/arm/mach-ixp4xx/Kconfig
+@@ -4,6 +4,14 @@ menu "Intel IXP4xx Implementation Option
+ 
+ comment "IXP4xx Platforms"
+ 
++config MACH_AP42X
++	bool "Tonze AP-422/425"
++	select PCI
++	help
++	  Say 'Y' here if you want your kernel to support Tonze's
++	  AP-422/425 boards. For more information on this platform,
++	  see http://tonze.com.tw
++
+ config MACH_NSLU2
+ 	bool
+ 	prompt "Linksys NSLU2"
+--- a/arch/arm/mach-ixp4xx/Makefile
++++ b/arch/arm/mach-ixp4xx/Makefile
+@@ -5,6 +5,7 @@
+ obj-pci-y	:=
+ obj-pci-n	:=
+ 
++obj-pci-$(CONFIG_MACH_AP42X)		+= ap42x-pci.o
+ obj-pci-$(CONFIG_ARCH_IXDP4XX)		+= ixdp425-pci.o
+ obj-pci-$(CONFIG_MACH_AVILA)		+= avila-pci.o
+ obj-pci-$(CONFIG_MACH_CAMBRIA)		+= cambria-pci.o
+@@ -32,6 +33,7 @@ obj-pci-$(CONFIG_MACH_USR8200)		+= usr82
+ 
+ obj-y	+= common.o
+ 
++obj-$(CONFIG_MACH_AP42X)	+= ap42x-setup.o
+ obj-$(CONFIG_ARCH_IXDP4XX)	+= ixdp425-setup.o
+ obj-$(CONFIG_MACH_AVILA)	+= avila-setup.o
+ obj-$(CONFIG_MACH_CAMBRIA)	+= cambria-setup.o
+--- /dev/null
++++ b/arch/arm/mach-ixp4xx/ap42x-pci.c
+@@ -0,0 +1,63 @@
++/*
++ * arch/arch/mach-ixp4xx/ap42x-pci.c
++ *
++ * PCI setup routines for Tonze AP-422/425
++ *
++ * Copyright (C) 2012 Imre Kaloz <kaloz@openwrt.org>
++ *
++ * based on coyote-pci.c:
++ *	Copyright (C) 2002 Jungo Software Technologies.
++ *	Copyright (C) 2003 MontaVista Softwrae, Inc.
++ *
++ * Maintainer: Imre Kaloz <kaloz@openwrt.org>
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ *
++ */
++
++#include <linux/kernel.h>
++#include <linux/pci.h>
++#include <linux/init.h>
++#include <linux/irq.h>
++
++#include <asm/mach-types.h>
++#include <mach/hardware.h>
++
++#include <asm/mach/pci.h>
++
++void __init ap42x_pci_preinit(void)
++{
++	irq_set_irq_type(IRQ_IXP4XX_GPIO10, IRQ_TYPE_LEVEL_LOW);
++	irq_set_irq_type(IRQ_IXP4XX_GPIO11, IRQ_TYPE_LEVEL_LOW);
++
++	ixp4xx_pci_preinit();
++}
++
++static int __init ap42x_map_irq(const struct pci_dev *dev, u8 slot,
++	u8 pin)
++{
++	if (slot == 1)
++		return IRQ_IXP4XX_GPIO11;
++	else if (slot == 2)
++		return IRQ_IXP4XX_GPIO10;
++	else return -1;
++}
++
++struct hw_pci ap42x_pci __initdata = {
++	.nr_controllers = 1,
++	.preinit	= ap42x_pci_preinit,
++	.ops		= &ixp4xx_ops,
++	.setup		= ixp4xx_setup,
++	.map_irq	= ap42x_map_irq,
++};
++
++int __init ap42x_pci_init(void)
++{
++	if (machine_is_ap42x())
++		pci_common_init(&ap42x_pci);
++	return 0;
++}
++
++subsys_initcall(ap42x_pci_init);
+--- /dev/null
++++ b/arch/arm/mach-ixp4xx/ap42x-setup.c
+@@ -0,0 +1,166 @@
++/*
++ * arch/arm/mach-ixp4xx/ap42x-setup.c
++ *
++ * Board setup for the Tonze AP-42x boards
++ *
++ * Copyright (C) 2012 Imre Kaloz <kaloz@openwrt.org>
++ *
++ * based on coyote-setup.c:
++ *      Copyright (C) 2003-2005 MontaVista Software, Inc.
++ *
++ * Author: Imre Kaloz <Kaloz@openwrt.org>
++ */
++
++#include <linux/kernel.h>
++#include <linux/init.h>
++#include <linux/device.h>
++#include <linux/serial.h>
++#include <linux/tty.h>
++#include <linux/serial_8250.h>
++#include <linux/mtd/physmap.h>
++#include <linux/dma-mapping.h>
++
++#include <asm/types.h>
++#include <asm/setup.h>
++#include <asm/memory.h>
++#include <mach/hardware.h>
++#include <asm/irq.h>
++#include <asm/mach-types.h>
++#include <asm/mach/arch.h>
++#include <asm/mach/flash.h>
++
++static struct mtd_partition ap42x_flash_partitions[] = {
++	{
++		.name		= "RedBoot",
++		.offset		= 0x00000000,
++		.size		= 0x00080000,
++	}, {
++		.name		= "linux",
++		.offset		= 0x00080000,
++		.size		= 0x00100000,
++	}, {
++		.name		= "rootfs",
++		.offset		= 0x00180000,
++		.size		= 0x00660000,
++	}, {
++		.name		= "FIS directory",
++		.offset		= 0x007f8000,
++		.size		= 0x00007000,
++	}, {
++		.name		= "RedBoot config",
++		.offset		= 0x007ff000,
++		.size		= 0x00001000,
++	},
++};
++
++static struct physmap_flash_data ap42x_flash_data = {
++	.width		= 2,
++	.parts		= ap42x_flash_partitions,
++	.nr_parts	= ARRAY_SIZE(ap42x_flash_partitions),
++};
++
++static struct resource ap42x_flash_resource = {
++	.flags		= IORESOURCE_MEM,
++	.start		= IXP4XX_EXP_BUS_BASE_PHYS,
++	.end		= IXP4XX_EXP_BUS_BASE_PHYS + SZ_8M - 1,
++};
++
++static struct platform_device ap42x_flash = {
++	.name			= "physmap-flash",
++	.id			= 0,
++	.dev		= {
++		.platform_data	= &ap42x_flash_data,
++	},
++	.num_resources		= 1,
++	.resource		= &ap42x_flash_resource,
++};
++
++static struct resource ap42x_uart_resource = {
++	.start	= IXP4XX_UART2_BASE_PHYS,
++	.end	= IXP4XX_UART2_BASE_PHYS + 0x0fff,
++	.flags	= IORESOURCE_MEM,
++};
++
++static struct plat_serial8250_port ap42x_uart_data[] = {
++	{
++		.mapbase	= IXP4XX_UART2_BASE_PHYS,
++		.membase	= (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
++		.irq		= IRQ_IXP4XX_UART2,
++		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
++		.iotype		= UPIO_MEM,
++		.regshift	= 2,
++		.uartclk	= IXP4XX_UART_XTAL,
++	},
++	{ },
++};
++
++static struct platform_device ap42x_uart = {
++	.name		= "serial8250",
++	.id		= PLAT8250_DEV_PLATFORM,
++	.dev			= {
++		.platform_data	= ap42x_uart_data,
++	},
++	.num_resources	= 1,
++	.resource	= &ap42x_uart_resource,
++};
++
++static struct eth_plat_info ap42x_plat_eth[] = {
++	{
++		.phy		= 2,
++		.rxq		= 3,
++		.txreadyq	= 20,
++	}, {
++		.phy		= 1,
++		.rxq		= 4,
++		.txreadyq	= 21,
++	}
++};
++
++static struct platform_device ap42x_eth[] = {
++	{
++		.name			= "ixp4xx_eth",
++		.id			= IXP4XX_ETH_NPEB,
++		.dev.platform_data	= ap42x_plat_eth,
++		.dev.coherent_dma_mask	= DMA_BIT_MASK(32),
++	}, {
++		.name			= "ixp4xx_eth",
++		.id			= IXP4XX_ETH_NPEC,
++		.dev.platform_data	= ap42x_plat_eth + 1,
++		.dev.coherent_dma_mask	= DMA_BIT_MASK(32),
++	}
++};
++
++static struct platform_device *ap42x_devices[] __initdata = {
++	&ap42x_flash,
++	&ap42x_uart,
++	&ap42x_eth[0],
++	&ap42x_eth[1],
++};
++
++static void __init ap42x_init(void)
++{
++	ixp4xx_sys_init();
++
++	ap42x_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
++	ap42x_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + SZ_32M - 1;
++
++	*IXP4XX_EXP_CS0 |= IXP4XX_FLASH_WRITABLE;
++	*IXP4XX_EXP_CS1 = *IXP4XX_EXP_CS0;
++
++	platform_add_devices(ap42x_devices, ARRAY_SIZE(ap42x_devices));
++}
++
++#ifdef CONFIG_MACH_AP42X
++MACHINE_START(AP42X, "Tonze AP-422/425")
++	/* Maintainer: Imre Kaloz <kaloz@openwrt.org> */
++	.map_io		= ixp4xx_map_io,
++	.init_irq	= ixp4xx_init_irq,
++	.init_time	= ixp4xx_timer_init,
++	.atag_offset	= 0x100,
++	.init_machine	= ap42x_init,
++#if defined(CONFIG_PCI)
++	.dma_zone_size	= SZ_64M,
++#endif
++	.restart	= ixp4xx_restart,
++MACHINE_END
++#endif
+--- a/arch/arm/mach-ixp4xx/include/mach/uncompress.h
++++ b/arch/arm/mach-ixp4xx/include/mach/uncompress.h
+@@ -45,7 +45,8 @@ static __inline__ void __arch_decomp_set
+ 	    machine_is_devixp() || machine_is_miccpt() || machine_is_mic256() ||
+ 	    machine_is_pronghorn() || machine_is_pronghorn_metro() ||
+ 	    machine_is_wrt300nv2() || machine_is_tw5334() ||
+-	    machine_is_usr8200() || machine_is_tw2662())
++	    machine_is_usr8200() || machine_is_tw2662() ||
++	    machine_is_ap42x())
+ 		uart_base = (volatile u32*) IXP4XX_UART2_BASE_PHYS;
+ 	else
+ 		uart_base = (volatile u32*) IXP4XX_UART1_BASE_PHYS;
diff --git a/target/linux/ixp4xx/patches-4.1/600-skb_avoid_dmabounce.patch b/target/linux/ixp4xx/patches-4.1/600-skb_avoid_dmabounce.patch
new file mode 100644
index 0000000..5d6809d
--- /dev/null
+++ b/target/linux/ixp4xx/patches-4.1/600-skb_avoid_dmabounce.patch
@@ -0,0 +1,23 @@
+--- a/net/core/skbuff.c
++++ b/net/core/skbuff.c
+@@ -212,6 +212,9 @@ struct sk_buff *__alloc_skb(unsigned int
+ 
+ 	if (sk_memalloc_socks() && (flags & SKB_ALLOC_RX))
+ 		gfp_mask |= __GFP_MEMALLOC;
++#ifdef CONFIG_ARCH_IXP4XX
++	gfp_mask |= GFP_DMA;
++#endif
+ 
+ 	/* Get the HEAD */
+ 	skb = kmem_cache_alloc_node(cache, gfp_mask & ~__GFP_DMA, node);
+@@ -1192,6 +1195,10 @@ int pskb_expand_head(struct sk_buff *skb
+ 	if (skb_shared(skb))
+ 		BUG();
+ 
++#ifdef CONFIG_ARCH_IXP4XX
++	gfp_mask |= GFP_DMA;
++#endif
++
+ 	size = SKB_DATA_ALIGN(size);
+ 
+ 	if (skb_pfmemalloc(skb))
diff --git a/target/linux/ixp4xx/patches-4.1/900-ixp4xx-crypto-include-module.h.patch b/target/linux/ixp4xx/patches-4.1/900-ixp4xx-crypto-include-module.h.patch
new file mode 100644
index 0000000..24c93dc
--- /dev/null
+++ b/target/linux/ixp4xx/patches-4.1/900-ixp4xx-crypto-include-module.h.patch
@@ -0,0 +1,10 @@
+--- a/drivers/crypto/ixp4xx_crypto.c
++++ b/drivers/crypto/ixp4xx_crypto.c
+@@ -14,6 +14,7 @@
+ #include <linux/dmapool.h>
+ #include <linux/crypto.h>
+ #include <linux/kernel.h>
++#include <linux/module.h>
+ #include <linux/rtnetlink.h>
+ #include <linux/interrupt.h>
+ #include <linux/spinlock.h>
diff --git a/target/linux/ixp4xx/patches-4.1/910-ixp4xx-nr_irq_lines.patch b/target/linux/ixp4xx/patches-4.1/910-ixp4xx-nr_irq_lines.patch
new file mode 100644
index 0000000..06e09f4
--- /dev/null
+++ b/target/linux/ixp4xx/patches-4.1/910-ixp4xx-nr_irq_lines.patch
@@ -0,0 +1,22 @@
+--- a/arch/arm/mach-ixp4xx/ixdp425-pci.c
++++ b/arch/arm/mach-ixp4xx/ixdp425-pci.c
+@@ -53,7 +53,7 @@ static int __init ixdp425_map_irq(const
+ 	};
+ 
+ 	if (slot >= 1 && slot <= MAX_DEV && pin >= 1 && pin <= IRQ_LINES)
+-		return pci_irq_table[(slot + pin - 2) % 4];
++		return pci_irq_table[(slot + pin - 2) % IRQ_LINES];
+ 
+ 	return -1;
+ }
+--- a/arch/arm/mach-ixp4xx/miccpt-pci.c
++++ b/arch/arm/mach-ixp4xx/miccpt-pci.c
+@@ -54,7 +54,7 @@ static int __init miccpt_map_irq(const s
+ 	};
+ 
+ 	if (slot >= 1 && slot <= MAX_DEV && pin >= 1 && pin <= IRQ_LINES)
+-		return pci_irq_table[(slot + pin - 2) % 4];
++		return pci_irq_table[(slot + pin - 2) % IRQ_LINES];
+ 
+ 	return -1;
+ }