aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ramips/patches-4.4/0044-i2c-MIPS-adds-ralink-I2C-driver.patch
blob: 21872082dd017d9a232f651a213a6dde21d460a4 (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
497
498
499
500
501
502
503
504
505
506
507
From 723b8beaabf3c3c4b1ce69480141f1e926f3f3b2 Mon Sep 17 00:00:00 2001
From: John Crispin <blogic@openwrt.org>
Date: Sun, 27 Jul 2014 09:52:56 +0100
Subject: [PATCH 44/53] i2c: MIPS: adds ralink I2C driver

Signed-off-by: John Crispin <blogic@openwrt.org>
---
 .../devicetree/bindings/i2c/i2c-ralink.txt         |   27 ++
 drivers/i2c/busses/Kconfig                         |    4 +
 drivers/i2c/busses/Makefile                        |    1 +
 drivers/i2c/busses/i2c-ralink.c                    |  327 ++++++++++++++++++++
 4 files changed, 359 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/i2c/i2c-ralink.txt
 create mode 100644 drivers/i2c/busses/i2c-ralink.c

--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/i2c-ralink.txt
@@ -0,0 +1,27 @@
+I2C for Ralink platforms
+
+Required properties :
+- compatible : Must be "link,rt3052-i2c"
+- reg: physical base address of the controller and length of memory mapped
+     region.
+- #address-cells = <1>;
+- #size-cells = <0>;
+
+Optional properties:
+- Child nodes conforming to i2c bus binding
+
+Example :
+
+palmbus@10000000 {
+	i2c@900 {
+		compatible = "link,rt3052-i2c";
+		reg = <0x900 0x100>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		hwmon@4b {
+			compatible = "national,lm92";
+			reg = <0x4b>;
+		};
+	};
+};
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -806,6 +806,11 @@ config I2C_RK3X
 	  This driver can also be built as a module. If so, the module will
 	  be called i2c-rk3x.
 
+config I2C_RALINK
+	tristate "Ralink I2C Controller"
+	depends on RALINK && !SOC_MT7621
+	select OF_I2C
+
 config HAVE_S3C2410_I2C
 	bool
 	help
--- a/drivers/i2c/busses/Makefile
+++ b/drivers/i2c/busses/Makefile
@@ -75,6 +75,7 @@ obj-$(CONFIG_I2C_PNX)		+= i2c-pnx.o
 obj-$(CONFIG_I2C_PUV3)		+= i2c-puv3.o
 obj-$(CONFIG_I2C_PXA)		+= i2c-pxa.o
 obj-$(CONFIG_I2C_PXA_PCI)	+= i2c-pxa-pci.o
+obj-$(CONFIG_I2C_RALINK)	+= i2c-ralink.o
 obj-$(CONFIG_I2C_QUP)		+= i2c-qup.o
 obj-$(CONFIG_I2C_RIIC)		+= i2c-riic.o
 obj-$(CONFIG_I2C_RK3X)		+= i2c-rk3x.o
--- /dev/null
+++ b/drivers/i2c/busses/i2c-ralink.c
@@ -0,0 +1,435 @@
+/*
+ * drivers/i2c/busses/i2c-ralink.c
+ *
+ * Copyright (C) 2013 Steven Liu <steven_liu@mediatek.com>
+ * Copyright (C) 2016 Michael Lee <igvtee@gmail.com>
+ *
+ * Improve driver for i2cdetect from i2c-tools to detect i2c devices on the bus.
+ * (C) 2014 Sittisak <sittisaks@hotmail.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/reset.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/platform_device.h>
+#include <linux/of_platform.h>
+#include <linux/i2c.h>
+#include <linux/io.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+
+#define REG_CONFIG_REG		0x00
+#define REG_CLKDIV_REG		0x04
+#define REG_DEVADDR_REG		0x08
+#define REG_ADDR_REG		0x0C
+#define REG_DATAOUT_REG		0x10
+#define REG_DATAIN_REG		0x14
+#define REG_STATUS_REG		0x18
+#define REG_STARTXFR_REG	0x1C
+#define REG_BYTECNT_REG		0x20
+
+/* REG_CONFIG_REG */
+#define I2C_ADDRLEN_OFFSET	5
+#define I2C_DEVADLEN_OFFSET	2
+#define I2C_ADDRLEN_MASK	0x3
+#define I2C_ADDR_DIS		BIT(1)
+#define I2C_DEVADDR_DIS		BIT(0)
+#define I2C_ADDRLEN_8		(7 << I2C_ADDRLEN_OFFSET)
+#define I2C_DEVADLEN_7		(6 << I2C_DEVADLEN_OFFSET)
+#define I2C_CONF_DEFAULT	(I2C_ADDRLEN_8 | I2C_DEVADLEN_7)
+
+/* REG_CLKDIV_REG */
+#define I2C_CLKDIV_MASK		0xffff
+
+/* REG_DEVADDR_REG */
+#define I2C_DEVADDR_MASK	0x7f
+
+/* REG_ADDR_REG */
+#define I2C_ADDR_MASK		0xff
+
+/* REG_STATUS_REG */
+#define I2C_STARTERR		BIT(4)
+#define I2C_ACKERR		BIT(3)
+#define I2C_DATARDY		BIT(2)
+#define I2C_SDOEMPTY		BIT(1)
+#define I2C_BUSY		BIT(0)
+
+/* REG_STARTXFR_REG */
+#define NOSTOP_CMD		BIT(2)
+#define NODATA_CMD		BIT(1)
+#define READ_CMD		BIT(0)
+
+/* REG_BYTECNT_REG */
+#define BYTECNT_MAX		64
+#define SET_BYTECNT(x)		(x - 1)
+
+/* timeout waiting for I2C devices to respond (clock streching) */
+#define TIMEOUT_MS              1000
+#define DELAY_INTERVAL_US       100
+
+struct rt_i2c {
+	void __iomem *base;
+	struct clk *clk;
+	struct device *dev;
+	struct i2c_adapter adap;
+	u32 cur_clk;
+	u32 clk_div;
+	u32 flags;
+};
+
+static void rt_i2c_w32(struct rt_i2c *i2c, u32 val, unsigned reg)
+{
+	iowrite32(val, i2c->base + reg);
+}
+
+static u32 rt_i2c_r32(struct rt_i2c *i2c, unsigned reg)
+{
+	return ioread32(i2c->base + reg);
+}
+
+static int poll_down_timeout(void __iomem *addr, u32 mask)
+{
+	unsigned long timeout = jiffies + msecs_to_jiffies(TIMEOUT_MS);
+
+	do {
+		if (!(readl_relaxed(addr) & mask))
+			return 0;
+
+		usleep_range(DELAY_INTERVAL_US, DELAY_INTERVAL_US + 50);
+	} while (time_before(jiffies, timeout));
+
+	return (readl_relaxed(addr) & mask) ? -EAGAIN : 0;
+}
+
+static int rt_i2c_wait_idle(struct rt_i2c *i2c)
+{
+	int ret;
+
+	ret = poll_down_timeout(i2c->base + REG_STATUS_REG, I2C_BUSY);
+	if (ret < 0)
+		dev_dbg(i2c->dev, "idle err(%d)\n", ret);
+
+	return ret;
+}
+
+static int poll_up_timeout(void __iomem *addr, u32 mask)
+{
+	unsigned long timeout = jiffies + msecs_to_jiffies(TIMEOUT_MS);
+	u32 status;
+
+	do {
+		status = readl_relaxed(addr);
+
+		/* check error status */
+		if (status & I2C_STARTERR)
+			return -EAGAIN;
+		else if (status & I2C_ACKERR)
+			return -ENXIO;
+		else if (status & mask)
+			return 0;
+
+		usleep_range(DELAY_INTERVAL_US, DELAY_INTERVAL_US + 50);
+	} while (time_before(jiffies, timeout));
+
+	return -ETIMEDOUT;
+}
+
+static int rt_i2c_wait_rx_done(struct rt_i2c *i2c)
+{
+	int ret;
+
+	ret = poll_up_timeout(i2c->base + REG_STATUS_REG, I2C_DATARDY);
+	if (ret < 0)
+		dev_dbg(i2c->dev, "rx err(%d)\n", ret);
+
+	return ret;
+}
+
+static int rt_i2c_wait_tx_done(struct rt_i2c *i2c)
+{
+	int ret;
+
+	ret = poll_up_timeout(i2c->base + REG_STATUS_REG, I2C_SDOEMPTY);
+	if (ret < 0)
+		dev_dbg(i2c->dev, "tx err(%d)\n", ret);
+
+	return ret;
+}
+
+static void rt_i2c_reset(struct rt_i2c *i2c)
+{
+	device_reset(i2c->adap.dev.parent);
+	barrier();
+	rt_i2c_w32(i2c, i2c->clk_div, REG_CLKDIV_REG);
+}
+
+static void rt_i2c_dump_reg(struct rt_i2c *i2c)
+{
+	dev_dbg(i2c->dev, "conf %08x, clkdiv %08x, devaddr %08x, " \
+			"addr %08x, dataout %08x, datain %08x, " \
+			"status %08x, startxfr %08x, bytecnt %08x\n",
+			rt_i2c_r32(i2c, REG_CONFIG_REG),
+			rt_i2c_r32(i2c, REG_CLKDIV_REG),
+			rt_i2c_r32(i2c, REG_DEVADDR_REG),
+			rt_i2c_r32(i2c, REG_ADDR_REG),
+			rt_i2c_r32(i2c, REG_DATAOUT_REG),
+			rt_i2c_r32(i2c, REG_DATAIN_REG),
+			rt_i2c_r32(i2c, REG_STATUS_REG),
+			rt_i2c_r32(i2c, REG_STARTXFR_REG),
+			rt_i2c_r32(i2c, REG_BYTECNT_REG));
+}
+
+static int rt_i2c_master_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs,
+		int num)
+{
+	struct rt_i2c *i2c;
+	struct i2c_msg *pmsg;
+	unsigned char addr;
+	int i, j, ret;
+	u32 cmd;
+
+	i2c = i2c_get_adapdata(adap);
+
+	for (i = 0; i < num; i++) {
+		pmsg = &msgs[i];
+		if (i == (num - 1))
+			cmd = 0;
+		else
+			cmd = NOSTOP_CMD;
+
+		dev_dbg(i2c->dev, "addr: 0x%x, len: %d, flags: 0x%x, stop: %d\n",
+				pmsg->addr, pmsg->len, pmsg->flags,
+				(cmd == 0)? 1 : 0);
+
+		/* wait hardware idle */
+		if ((ret = rt_i2c_wait_idle(i2c)))
+			goto err_timeout;
+
+		if (pmsg->flags & I2C_M_TEN) {
+			rt_i2c_w32(i2c, I2C_CONF_DEFAULT, REG_CONFIG_REG);
+			/* 10 bits address */
+			addr = 0x78 | ((pmsg->addr >> 8) & 0x03);
+			rt_i2c_w32(i2c, addr & I2C_DEVADDR_MASK,
+					REG_DEVADDR_REG);
+			rt_i2c_w32(i2c, pmsg->addr & I2C_ADDR_MASK,
+					REG_ADDR_REG);
+		} else {
+			rt_i2c_w32(i2c, I2C_CONF_DEFAULT | I2C_ADDR_DIS,
+					REG_CONFIG_REG);
+			/* 7 bits address */
+			rt_i2c_w32(i2c, pmsg->addr & I2C_DEVADDR_MASK,
+					REG_DEVADDR_REG);
+		}
+
+		/* buffer length */
+		if (pmsg->len == 0)
+			cmd |= NODATA_CMD;
+		else
+			rt_i2c_w32(i2c, SET_BYTECNT(pmsg->len),
+					REG_BYTECNT_REG);
+
+		j = 0;
+		if (pmsg->flags & I2C_M_RD) {
+			cmd |= READ_CMD;
+			/* start transfer */
+			barrier();
+			rt_i2c_w32(i2c, cmd, REG_STARTXFR_REG);
+			do {
+				/* wait */
+				if ((ret = rt_i2c_wait_rx_done(i2c)))
+					goto err_timeout;
+				/* read data */
+				if (pmsg->len)
+					pmsg->buf[j] = rt_i2c_r32(i2c,
+							REG_DATAIN_REG);
+				j++;
+			} while (j < pmsg->len);
+		} else {
+			do {
+				/* write data */
+				if (pmsg->len)
+					rt_i2c_w32(i2c, pmsg->buf[j],
+							REG_DATAOUT_REG);
+				/* start transfer */
+				if (j == 0) {
+					barrier();
+					rt_i2c_w32(i2c, cmd, REG_STARTXFR_REG);
+				}
+				/* wait */
+				if ((ret = rt_i2c_wait_tx_done(i2c)))
+					goto err_timeout;
+				j++;
+			} while (j < pmsg->len);
+		}
+	}
+	/* the return value is number of executed messages */
+	ret = i;
+
+	return ret;
+
+err_timeout:
+	rt_i2c_dump_reg(i2c);
+	rt_i2c_reset(i2c);
+	return ret;
+}
+
+static u32 rt_i2c_func(struct i2c_adapter *a)
+{
+	return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
+}
+
+static const struct i2c_algorithm rt_i2c_algo = {
+	.master_xfer	= rt_i2c_master_xfer,
+	.functionality	= rt_i2c_func,
+};
+
+static const struct of_device_id i2c_rt_dt_ids[] = {
+	{ .compatible = "ralink,rt2880-i2c" },
+	{ /* sentinel */ }
+};
+
+MODULE_DEVICE_TABLE(of, i2c_rt_dt_ids);
+
+static struct i2c_adapter_quirks rt_i2c_quirks = {
+        .max_write_len = BYTECNT_MAX,
+        .max_read_len = BYTECNT_MAX,
+};
+
+static int rt_i2c_init(struct rt_i2c *i2c)
+{
+	u32 reg;
+
+	/* i2c_sclk = periph_clk / ((2 * clk_div) + 5) */
+	i2c->clk_div = (clk_get_rate(i2c->clk) - (5 * i2c->cur_clk)) /
+		(2 * i2c->cur_clk);
+	if (i2c->clk_div < 8)
+		i2c->clk_div = 8;
+	if (i2c->clk_div > I2C_CLKDIV_MASK)
+		i2c->clk_div = I2C_CLKDIV_MASK;
+
+	/* check support combinde/repeated start message */
+	rt_i2c_w32(i2c, NOSTOP_CMD, REG_STARTXFR_REG);
+	reg = rt_i2c_r32(i2c, REG_STARTXFR_REG) & NOSTOP_CMD;
+
+	rt_i2c_reset(i2c);
+
+	return reg;
+}
+
+static int rt_i2c_probe(struct platform_device *pdev)
+{
+	struct resource *res;
+	struct rt_i2c *i2c;
+	struct i2c_adapter *adap;
+	const struct of_device_id *match;
+	int ret, restart;
+
+	match = of_match_device(i2c_rt_dt_ids, &pdev->dev);
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		dev_err(&pdev->dev, "no memory resource found\n");
+		return -ENODEV;
+	}
+
+	i2c = devm_kzalloc(&pdev->dev, sizeof(struct rt_i2c), GFP_KERNEL);
+	if (!i2c) {
+		dev_err(&pdev->dev, "failed to allocate i2c_adapter\n");
+		return -ENOMEM;
+	}
+
+	i2c->base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(i2c->base))
+		return PTR_ERR(i2c->base);
+
+	i2c->clk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(i2c->clk)) {
+		dev_err(&pdev->dev, "no clock defined\n");
+		return -ENODEV;
+	}
+	clk_prepare_enable(i2c->clk);
+	i2c->dev = &pdev->dev;
+
+	if (of_property_read_u32(pdev->dev.of_node,
+				"clock-frequency", &i2c->cur_clk))
+		i2c->cur_clk = 100000;
+
+	adap = &i2c->adap;
+	adap->owner = THIS_MODULE;
+	adap->class = I2C_CLASS_HWMON | I2C_CLASS_SPD;
+	adap->algo = &rt_i2c_algo;
+	adap->retries = 3;
+	adap->dev.parent = &pdev->dev;
+	i2c_set_adapdata(adap, i2c);
+	adap->dev.of_node = pdev->dev.of_node;
+	strlcpy(adap->name, dev_name(&pdev->dev), sizeof(adap->name));
+	adap->quirks = &rt_i2c_quirks;
+
+	platform_set_drvdata(pdev, i2c);
+
+	restart = rt_i2c_init(i2c);
+
+	ret = i2c_add_adapter(adap);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "failed to add adapter\n");
+		clk_disable_unprepare(i2c->clk);
+		return ret;
+	}
+
+	dev_info(&pdev->dev, "clock %uKHz, re-start %ssupport\n",
+			i2c->cur_clk/1000, restart ? "" : "not ");
+
+	return ret;
+}
+
+static int rt_i2c_remove(struct platform_device *pdev)
+{
+	struct rt_i2c *i2c = platform_get_drvdata(pdev);
+
+	i2c_del_adapter(&i2c->adap);
+	clk_disable_unprepare(i2c->clk);
+
+	return 0;
+}
+
+static struct platform_driver rt_i2c_driver = {
+	.probe		= rt_i2c_probe,
+	.remove		= rt_i2c_remove,
+	.driver		= {
+		.owner	= THIS_MODULE,
+		.name	= "i2c-ralink",
+		.of_match_table = i2c_rt_dt_ids,
+	},
+};
+
+static int __init i2c_rt_init (void)
+{
+	return platform_driver_register(&rt_i2c_driver);
+}
+subsys_initcall(i2c_rt_init);
+
+static void __exit i2c_rt_exit (void)
+{
+	platform_driver_unregister(&rt_i2c_driver);
+}
+module_exit(i2c_rt_exit);
+
+MODULE_AUTHOR("Steven Liu <steven_liu@mediatek.com>");
+MODULE_DESCRIPTION("Ralink I2c host driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:Ralink-I2C");