aboutsummaryrefslogtreecommitdiffstats
path: root/target
Commit message (Collapse)AuthorAgeFilesLines
* rampis: add support for status led on ASUS RT-N14UJohn Crispin2015-05-231-1/+1
| | | | | | | | | | The diag.sh script lacked an entry for the status led on the RT-N14U, map it to the asus:blue:power led which is also used by the boot loader to report boot status (eg. TFTP recovery mode VS normal boot) Signed-off-by: Matteo Panella <m.panella@level28.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45725 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: Adding support for AXIMCom MR-102N 3G/4G Travel Mobile RouterJohn Crispin2015-05-238-1/+144
| | | | | | | | | | MR-102N is a RT3050F based wireless router(32M RAM + 8M NOR flash) with 1 USB and 1 ethernet port. The original product information can be found at: http://www.aximcom.com/en/MR-102N Signed-off-by: Tai-hwa Liang <atliang@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45724 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: fix switch names for several boards in device treeJohn Crispin2015-05-233-4/+4
| | | | | | Signed-off-by: Roman Yeryomin <roman@advem.lv> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45723 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: add support for Comfast CF-WR800NJohn Crispin2015-05-237-0/+133
| | | | | | | | | This patch adds support for Comfast CF-WR800N, a wall-plug wireless router based on the MT7620N SoC with one Ethernet port and a 802.11n 2.4 GHz radio. Signed-off-by: Roger Pueyo Centelles <roger.pueyo@guifi.net> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45722 3c298f89-4303-0410-b956-a3cf2f4a3e73
* lantiq: Fix initialization of the PCI IRQs when PCIe is also enabledJohn Crispin2015-05-231-18/+19
| | | | | | | | | | There are already ifx_pcie_bios_{map_irq,plat_dev_init} hooks defined in ifxmips_pcie.c. Instead of defining a new hook we simply re-use the existing ones (this is basically what the lantiq BSP code does). Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45718 3c298f89-4303-0410-b956-a3cf2f4a3e73
* lantiq: Fix PCIe bus when PCI is also enabled.John Crispin2015-05-231-10/+10
| | | | | | | | | | | The PCIe bus seems to require a hack/workaround when PCI is enabled as well. Unfortunately this is guarded by an CONFIG_IFX_PCI ifdef, which is only defined in lantiq's BSP code. The config symbol for the upstream lantiq PCI driver is CONFIG_PCI_LANTIQ. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45717 3c298f89-4303-0410-b956-a3cf2f4a3e73
* bcm53xx: add OHCI (USB 1.1) supportHauke Mehrtens2015-05-231-26/+4
| | | | | | | | | | | There is also a OHCI controller, activate it for USB 1.1 support. This should close #19601. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45716 3c298f89-4303-0410-b956-a3cf2f4a3e73
* arm64: enable new errata backported to 3.18Jonas Gorski2015-05-221-7/+6
| | | | | | | | | 3.18.13 introduced a bunch of new errata, enable them to be on the safe side. Signed-off-by: Jonas Gorski <jogo@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45715 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kernel: add missing generic config symbolJonas Gorski2015-05-221-0/+1
| | | | | | Signed-off-by: Jonas Gorski <jogo@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45714 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kernel: update 3.18 to 3.18.14Jonas Gorski2015-05-21193-1458/+623
| | | | | | | | | | | | | | Changelogs: * https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.12 * https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.13 * https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.14 Build tested on brcm63xx and ipq806x, runtested on brcm63xx. Signed-off-by: Jonas Gorski <jogo@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45711 3c298f89-4303-0410-b956-a3cf2f4a3e73
* brcm63xx: fix failsafe lan and status led for DSL-274xB rev. F1Jonas Gorski2015-05-212-1/+3
| | | | | | | | | Add it to the appropriate places so the power led properly works and ethernet is properly configured for failsafe. Signed-off-by: Jonas Gorski <jogo@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45709 3c298f89-4303-0410-b956-a3cf2f4a3e73
* brcm63xx: Add Huawei HG655b supportJonas Gorski2015-05-219-0/+207
| | | | | | | | | | | | | | | This patch adds support for the Huawei HG655b. Nothing much special in this router, it's just another BCM6368 with a Ralink RT3062 wifi chip and the calibration data embedded in the main flash chip at offset 0x7c0000. There is also configuration data used by the OEM firmware before the cal_data partition, this area is protected by the board_data partition in this patch. Signed-off-by: Daniel Gonzalez <dgcbueu@gmail.com> Signed-off-by: Jonas Gorski <jogo@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45708 3c298f89-4303-0410-b956-a3cf2f4a3e73
* generic/4.0: fix error during kernel patch applicationSteven Barth2015-05-201-10/+3
| | | | | | | | | | | | | | | | | | | | Commit 5168c9a5702648eb690d32ec821647aca80aeba9 introduced a regression during patch application on the 4.0 kernel. Some of the patched content doesn't match the actual code, therefore leading to the following error: Applying patch generic/667-ipv6-Fixed-source-specific-default-route-handling.patch patching file net/ipv6/ip6_output.c Hunk #1 FAILED at 886. 1 out of 1 hunk FAILED -- rejects in file net/ipv6/ip6_output.c patching file net/ipv6/route.c Hunk #1 succeeded at 2247 (offset 2 lines). Patch generic/667-ipv6-Fixed-source-specific-default-route-handling.patch does not apply (enforce with -f) This change just adapts the actual patch to fix what is in kernel 4.0 and make it apply cleanly. Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45705 3c298f89-4303-0410-b956-a3cf2f4a3e73
* mvebu: supress useless in-cpu rtc init on the MambaImre Kaloz2015-05-191-0/+14
| | | | | | | Signed-off-by: Imre Kaloz <kaloz@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45704 3c298f89-4303-0410-b956-a3cf2f4a3e73
* linux: backport IPv6 SAS fixes for source-specific routesSteven Barth2015-05-192-0/+202
| | | | | | Signed-off-by: Steven Barth <steven@midlink.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45699 3c298f89-4303-0410-b956-a3cf2f4a3e73
* bcm53xx: add Asus RT-AC87U partitioning hacky workaroundRafał Miłecki2015-05-171-0/+47
| | | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45694 3c298f89-4303-0410-b956-a3cf2f4a3e73
* bcm53xx: try to fix network on Asus RT-AC87URafał Miłecki2015-05-162-7/+16
| | | | | | | | | | | | | | | | | | | This device seems to have switch port 7 connected to the CPU: vlan1ports=1 2 3 5 7* vlan2ports=0 7u it should be handled by eth1 and NVRAM seems to confirm that (no et0macaddr entry, existing et1macaddr & et1phyaddr entries). One of the remaining ports (4/8?) may be connected to the Quantenna SoC. Original firmware boot log contains following messages: (0x00,0x5d)Port 5 States Override: 0xfb (0x00,0x5f)Port 7 States Override: 0xfb (0x00,0x0e)Port 8 States Override: 0x0a (why does it force port 5 state?!) Signed-off-by: Rafał Miłecki <zajec5@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45692 3c298f89-4303-0410-b956-a3cf2f4a3e73
* bcm53xx: use backported Asus RT-AC87U DT patchRafał Miłecki2015-05-164-12/+65
| | | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45691 3c298f89-4303-0410-b956-a3cf2f4a3e73
* bcm53xx: enable RT-AC87U UART consoleRafał Miłecki2015-05-161-0/+21
| | | | | | Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45690 3c298f89-4303-0410-b956-a3cf2f4a3e73
* bcm53xx: add support for SmartRG SR400acRafał Miłecki2015-05-134-2/+50
| | | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45686 3c298f89-4303-0410-b956-a3cf2f4a3e73
* bcm53xx: replace DT patches with backports from stblinuxRafał Miłecki2015-05-1310-72/+329
| | | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45685 3c298f89-4303-0410-b956-a3cf2f4a3e73
* bcm53xx: use of_machine_is_compatible helper in b53 fixRafał Miłecki2015-05-131-8/+11
| | | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45684 3c298f89-4303-0410-b956-a3cf2f4a3e73
* bcm53xx: fix "typo" in b53 patch fixing R8000 CPU portRafał Miłecki2015-05-131-2/+2
| | | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45683 3c298f89-4303-0410-b956-a3cf2f4a3e73
* bcm53xx: add b53 hacky workaround for Netgear R8000 CPU portRafał Miłecki2015-05-131-0/+35
| | | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45682 3c298f89-4303-0410-b956-a3cf2f4a3e73
* bcm53xx: fix default network interface on Netgear R8000Rafał Miłecki2015-05-131-2/+11
| | | | | | | | | | It has 3 Ethernet interfaces, each of them connected to separated switch port. Default NVRAM uses switch port 8 as CPU which is connected to the 3rd interface (eth2). Signed-off-by: Rafał Miłecki <zajec5@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45681 3c298f89-4303-0410-b956-a3cf2f4a3e73
* bcm53xx: bgmac: add support for the 3rd coreRafał Miłecki2015-05-131-0/+68
| | | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45680 3c298f89-4303-0410-b956-a3cf2f4a3e73
* bcm53xx: sync NVRAM and SPROM drivers with upstream versionRafał Miłecki2015-05-132-15/+27
| | | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45678 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kernel: backport struct ssb_sprom changes submitted by MIPS treeRafał Miłecki2015-05-132-0/+64
| | | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45677 3c298f89-4303-0410-b956-a3cf2f4a3e73
* b53: Allow using all ports on BCM53012Rafał Miłecki2015-05-121-1/+1
| | | | | | | | | | | | | This chipset has at least 8 usable ports, e.g. Netgear R8000 has ports 5, 7 and 8 connected to Ethernet interfaces: vlan1ports=0 1 2 3 5 7 8* vlan2ports=4 8u Port 6 seems to be always disabled. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Acked-by: Jonas Gorski <jogo@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45676 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: convert tl-wr741nd v1/v2 to new image building code, add ↵Felix Fietkau2015-05-111-4/+68
| | | | | | | | infrastructure for building the loader Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45672 3c298f89-4303-0410-b956-a3cf2f4a3e73
* mtd: remove the warning about read-only caused by size vs. block boundary ↵Felix Fietkau2015-05-102-8/+2
| | | | | | | | | | | | | | | | | | | | | | | | mismatch Since the kernel/rootfs split handling was modified 2 years ago by r37283 ( https://dev.openwrt.org/changeset/37283 ) and by the subsequent checkins, users have seen rather scary mtd errors in the log at every boot. The message ends "-- forcing read-only", which looks a bit error-like. That error has been mentioned in some forum threads, when users have noticed this message instead of some actual error. [ 2.940000] 0x000000070000-0x000000ff0000 : "firmware" [ 2.970000] 2 netgear-fw partitions found on MTD device firmware [ 2.970000] 0x000000070000-0x000000188440 : "kernel" [ 2.980000] mtd: partition "kernel" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only [ 2.990000] 0x000000188440-0x000000ff0000 : "rootfs" The patch removes the rather useless warning message. signed-off-by: Hannu Nyman <hannu.nyman@iki.fi> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45669 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add platform_pre_upgrade for sysupgradeFelix Fietkau2015-05-101-0/+13
| | | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45667 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kernel: fix regression in backtrace module info change (#19631)Felix Fietkau2015-05-102-26/+22
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45665 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ipq806x: add pcie support to ipq806x based platformsFelix Fietkau2015-05-1012-23/+2662
| | | | | | | | | | | | | | This change adds PCIe support to IPQ806x based platforms. The driver is actually cherry-picked from the following LKML thread: *https://lwn.net/Articles/643086/ (patches 110-111) We also add here an additional fix to support multiple PCI controllers on the same platform (patch 112), and to patch the ap148 & dbs149 DTS files (patch 113). Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45663 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ipq806x: add support for zImage kernelFelix Fietkau2015-05-103-3/+5
| | | | | | | | | | | | | | | This change enable zImage+appended dtb support in ipq806x kernel options. The zImage will now be generated as part of the kernel binaries. Platforms which do not have DT support enabled in U-boot can now make use of it by generating zImage files and appending dtb to it. It is not used yet but it is done as a stepping stone for early IPQ806x platforms, which did not include DT support in U-boot. Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45662 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ipq806x: fix boot freeze on zImage kernelFelix Fietkau2015-05-102-0/+144
| | | | | | | | | | | | | | | | | | | | | | | ARCH_QCOM is using the ARCH_MULTIPLATFORM option, as now recommended on most ARM architectures. This automatically calculate ZRELADDR by masking PHYS_OFFSET with 0xf8000000. On IPQ806x though, the first ~20MB of RAM is reserved for the hardware. In newer bootloader, when DT is used, this is not a problem, we just reserve this memory in the device tree. But if the bootloader doesn't have DT support, then ATAGS have to be used. In this case, the ARM decompressor will position the kernel in this low mem, which will not be in the RAM section mapped by the bootloader, which means the kernel will freeze in the middle of the boot process trying to map the memory. As a work around, this patch allows disabling AUTO_ZRELADDR when ARCH_QCOM is selected. It makes the zImage usage possible on bootloaders which don't support device-tree, which is the case on certain early IPQ806x based designs. Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45661 3c298f89-4303-0410-b956-a3cf2f4a3e73
* generic: add CRYPTO_DEV_QCE option to default configFelix Fietkau2015-05-102-0/+2
| | | | | | | | | | This option has been added in kernel 3.17. It shows-up only when both ARCH_QCOM and CRYPTO are enabled. So we'll disable these two by default to avoid stalling the build when these conditions are met. Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45658 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add status led found on ew-dorin boardsLuka Perkov2015-05-102-1/+10
| | | | | | Signed-off-by: Catrinel Catrinescu <cc@80211.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45656 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kernel: when KALLSYMS is disabled, print module address + size for matching ↵Felix Fietkau2015-05-102-0/+76
| | | | | | | | backtrace entries Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45655 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kernel: fix pppoe disconnect issuesFelix Fietkau2015-05-093-0/+143
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45653 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kernel: backport first bcma patches from 4.2Rafał Miłecki2015-05-094-34/+74
| | | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45652 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kernel: add accidentally left out fib trie backport patchFelix Fietkau2015-05-081-0/+52
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45650 3c298f89-4303-0410-b956-a3cf2f4a3e73
* generic: refresh patchesLuka Perkov2015-05-081-2/+2
| | | | | | Signed-off-by: Luka Perkov <luka@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45648 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kirkwood: add support for the Seagate GoflexHomeLuka Perkov2015-05-087-0/+167
| | | | | | | | Add Support for the Seagate GoflexHome <http://wiki.openwrt.org/toh/seagate/goflexhome> Signed-off-by: L. D. Pinney <ldpinney@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45647 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: allow mktplinkfw calls from the new image code to fail (because of ↵Felix Fietkau2015-05-081-3/+2
| | | | | | | | oversized images) Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45646 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: allow tp-link initramfs images to exceed size limitsFelix Fietkau2015-05-081-1/+1
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45645 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx/image: move TPLINK-LZMA image to new build codeFelix Fietkau2015-05-081-66/+361
| | | | | | | | | | | There are 2 images missing: TLWR2543 TLWR1043V2 which have special properties. v2: set correct DEVICE_PROFILES for all images. v2: migrate TP-LINK TL-WR710N v2 which was committed after v1. v2: split very very long line `TARGET_DEVICES +=` into smaller parts Signed-off-by: Alexander Couzens <lynxis@fe80.eu> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45643 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: do general formatting on wnr2000-v4Felix Fietkau2015-05-081-43/+52
| | | | | | Signed-off-by: Michael J. Bazzinotti <mbazzinotti@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45640 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: fix spelling, add copyright on wnr2000-v4Felix Fietkau2015-05-081-2/+3
| | | | | | Signed-off-by: Michael J. Bazzinotti <mbazzinotti@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45639 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add support for Green WAN LED on wnr2000-v4Felix Fietkau2015-05-081-0/+4
| | | | | | Signed-off-by: Michael J. Bazzinotti <mbazzinotti@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45638 3c298f89-4303-0410-b956-a3cf2f4a3e73