aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ramips/files/drivers/net/ethernet/ralink/soc_mt7620.c
Commit message (Collapse)AuthorAgeFilesLines
* ralink: fix hw status almost full not work on mt7620 and mt7621John Crispin2015-02-091-0/+13
| | | | | | | | | | | | | | the old FE_INT_STATUS register becomes two registers. FE_INT_STATUS and INT_STATUS. so the hw status almost full must change to read from FE_INT_STATUS register. tx/rx done read from INT_STATUS register. mt7620 datasheet define CNT_GDM1_AF at BIT(29). but after test it should be BIT(13). why? Signed-off-by: michael lee <igvtee@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44371 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ralink: fix ethernet feature TSO not workFelix Fietkau2015-01-241-7/+6
| | | | | | | | | | | | | | | | * fix TSO features verify on mt7621 firewrt board * improve tx clean up. no need to access uncached memory. also use TX_DTX register instead of read tx ring DONE bit * mt7621 need napi weight 64 to get more performance * remove netif_receive_skb, after kernel version 3.7 tcp4_gro_receive can handle tcp checksum. on rt2880 use iperf tcp LAN to WAN throughput test. with gro 135 Mbits/sec. without gro 80.4Mbits/sec. Signed-off-by: michael lee <igvtee@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44118 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ralink: init tx/rx vlan offload register for mt7621Felix Fietkau2015-01-241-3/+15
| | | | | | | | | | on mt7621 don't have tx vlan vid registers. so set FE_REG_FE_DMA_VID_BASE to 0. set rx vlan offload register to disable. Signed-off-by: michael lee <igvtee@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44117 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ralink: improve check rx sg function. use check frags instead of function callFelix Fietkau2015-01-181-9/+4
| | | | | | Signed-off-by: michael lee <igvtee@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44046 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ralink: correct handle hardware rx 2bytes offsetFelix Fietkau2015-01-181-5/+4
| | | | | | Signed-off-by: michael lee <igvtee@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44045 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ralink: use fe_reset to control all resetFelix Fietkau2015-01-181-10/+2
| | | | | | Signed-off-by: michael lee <igvtee@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44044 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ralink: improve tx_timeout functionFelix Fietkau2015-01-181-0/+4
| | | | | | | | | | * use default timeout value * print more debug ring info * move timeout reset function to workqueue Signed-off-by: michael lee <igvtee@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44043 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ralink: reduce access to uncached tx/rx dma ring bufferFelix Fietkau2015-01-181-6/+6
| | | | | | Signed-off-by: michael lee <igvtee@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44041 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: remove interrupt coalescing, it is unnecessary with napi polling and ↵Felix Fietkau2015-01-131-4/+4
| | | | | | | | could reduce throughput Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43952 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: disable ethernet checksum offloads for mt7621, they are brokenFelix Fietkau2015-01-021-1/+10
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43811 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ralink: fix tx vlan offload and hardware statusJohn Crispin2014-11-191-1/+6
| | | | | | | | | | | | | hardware status and tx vlan offload support on all targets except rt5350. so i modify the IS_ENABLE condition only for mt7621. support mt7621 hardware status reference by SDK. but i don't have mt7621. if not work just set mt7621 FE_REG_FE_COUNTER_BASE to 0 to let software count. Signed-off-by: michael lee <igvtee@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43303 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ralink: mt7621 has a different base addr for PVIDJohn Crispin2014-11-141-1/+19
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43243 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ralink: add support for mt7621 ethernetJohn Crispin2014-11-121-3/+73
| | | | | | | | somehow all switch ports still come up as 10mbit. Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43237 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ralink: move ethernet driver to files/John Crispin2014-11-061-0/+164
Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43194 3c298f89-4303-0410-b956-a3cf2f4a3e73
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-31 01:11:43 +0000