aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ramips/dts
Commit message (Collapse)AuthorAgeFilesLines
* ramips: fix serial baudrate for final version of ZBT-WG2626 boardJohn Crispin2016-01-191-1/+1
| | | | | | | | | | The bootloader was updated and now uses 115200 instead of 57600 baud for the serial console. Change this also in OpenWrt's DTS, so the rate is consistent for bootloader and linux kernel output. Signed-off-by: Daniel Golle <daniel@makrotopia.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48359 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: fix duplicate /dts-v1/ line for WRTNODE2Felix Fietkau2016-01-061-2/+0
| | | | | | Signed-off-by: Noble Pepper <openwrtmail@noblepepper.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48138 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ralink: update the usb phy driver to the version sent upstreamJohn Crispin2016-01-046-8/+8
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48114 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ralink: fix USB compatible stringsJohn Crispin2016-01-046-12/+12
| | | | | | | | switch to the upstream compatible strings for ehci and ohci support. Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48113 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: Remove LED GPIO definitions in MQmaker WiTi device treeJohn Crispin2016-01-011-19/+0
| | | | | | | | LED's were defined wrong in the device tree file, they are hardware driven because they are connected directly to the switch chip and wireless chips respectively, thus no GPIO addresses are assigned to them. It is safe to remove them from the device tree file to stop confusion. Signed-off-by: Sebastian Careba <nitroshift@yahoo.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48055 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ralink: add WRTnode2 platform and led supportJohn Crispin2016-01-013-0/+149
| | | | | | Signed-off-by: xzmu <xzmu@wrtnode.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48049 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: set the wifi mac address to the same as LAN on witiFelix Fietkau2016-01-011-0/+2
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48029 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: add a script to fix up the broken mac address on the witi boardFelix Fietkau2016-01-011-1/+0
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48027 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: fix inverted LEDs for RE6500Felix Fietkau2016-01-011-2/+2
| | | | | | Signed-off-by: Bjoern Dobe <bjoern@dobecom.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48022 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: add mac address assignment for eth0 on RE6500Felix Fietkau2016-01-011-0/+4
| | | | | | | Signed-off-by: Bjoern Dobe <bjoern@dobecom.de> Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48021 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: fix firmware partition sizeFelix Fietkau2016-01-011-1/+1
| | | | | | Signed-off-by: Bjoern Dobe <bjoern@dobecom.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48020 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: fix memory size for RE6500Felix Fietkau2016-01-011-1/+1
| | | | | | Signed-off-by: Bjoern Dobe <bjoern@dobecom.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48019 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: disable NAND device in mt7621.dtsi to fix boot errors on many devicesFelix Fietkau2015-12-193-12/+4
| | | | | | | | Enable it from .dts files that need it, also remove redundant properties Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47936 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: update DTS files to use jedec,spi-nor compatible string for m25p80 ↵Felix Fietkau2015-12-1894-94/+94
| | | | | | | | to fix probe issues Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47935 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ralink: fixup devicetree files to work with new ethernet driverJohn Crispin2015-12-17139-176/+190
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47900 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: add support for Ubiquiti EdgeRouter X (UBNT-ERX)John Crispin2015-12-121-0/+119
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This router is based on MT7621 SoC, no wifi, no usb, nand. Works: * Boots. * Ethernet. * Switch. * Button (reset). * Flashing OpenWrt from stock firmware. * Upgrading OpenWrt. Doesn't work: * No GPIO leds. All leds are controlled by switch, but stock firmware was able to control them. * SoC has crypto engine but no open driver. * SoC has nat acceleration, but no open driver. * This router has 2MB spi flash soldered in but MT nand/spi drivers do not support pin sharing, so it is not accessable and disabled. Stock firmware could read it and it was empty. * PoE out. Router has serial pins populated. If looking at the top of the router, then counting from Eth sockets pins go as: 'GND, RX, TX, GND'. 3.3v, 57600. U-boot bootloader supports tftpboot, controlled from serial. This router has two kernel partitions: 'live' and 'backup'. They are swapped during flashing (on both stock and OpenWrt). Active partition is controlled by a flag in a factory partition. U-boot has custom command to switch active kernel partition. Kernel partitions are 'bare flash' 3MB. Stock bootloader has no UBI support. Stock rootfs is UBIFS. Flashing procedure. Stock firmware uses custom kernel patch to mount squashfs from a file that is located on UBIFS volume. This makes wiping out this volume from within stock firmware difficult. Instead this patch builds image that is flashable by stock firmware and contains initrams image (with minimal set of packages to fit into kernel partition). Once this is flashed one can reboot into initramfs OpenWrt and use sysupgrade to flash OpenWrt including rootfs into nand. Note: factory image is only built if initramfs image is enabled. Signed-off-by: Nikolay Martynov <mar.kolya@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47881 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: move partition definitions out of mt7621.dtsi fileJohn Crispin2015-12-122-20/+22
| | | | | | | | | Partitions defined in parent dtsi cannot be undefined in children. This moves partitions defined in mt7621.dtsi into board's device tree. Signed-off-by: Nikolay Martynov <mar.kolya@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47876 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: use gic timer as clocksource for mt7621John Crispin2015-12-121-0/+26
| | | | | | | | | | * Switches clocksource to gic timer. * Moves frequency definitions to dtsi since frequency was hardcoded anyway Will work on proper frequency detection later. Signed-off-by: Nikolay Martynov <mar.kolya@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47875 3c298f89-4303-0410-b956-a3cf2f4a3e73
* Revert "ramips: use gic timer as clocksource for mt7621"Felix Fietkau2015-12-111-14/+0
| | | | | | This reverts commit 270a2afcc544ca14e79198346e7e186033472ae7. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47872 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: add additional support for MQmaker WiTi boardJohn Crispin2015-12-111-0/+146
| | | | | | | | | | | | | | The board is based on mt7621AT cpu, and has 16mb nor flash, 256mb of ram, 2 sata ports, microsd card slot, 1 USB 3.0 port and at least one 2.4 and one 5 ghz antenna. This is the 6th submission that adds support for XHCI in the device tree file, along with switching the location of the 2 radio's and addition of the kmod-i2c-mt7621 in the default packages of the profile. Signed-off-by: Sebastian Careba <nitroshift@yahoo.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47845 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: Fix support for PBR-M1 boardJohn Crispin2015-12-111-14/+53
| | | | | | | | | | The PBR-M1 support in current OpenWrt is for the early demo board and it doesn't work on the final board.This patch fixes the support for it. The LED called pbr-m1:buzzer is a beeper connected to GPIO26 so I used gpio-beeper instead of gpio-leds. Signed-off-by: 郭传鈜 <gch981213@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47844 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: use gic timer as clocksource for mt7621John Crispin2015-12-111-0/+14
| | | | | | | | | | * Switches clocksource to gic timer. * Moves frequency definitions to dtsi since frequency was hardcoded anyway Will work on proper frequency detection later. Signed-off-by: Nikolay Martynov <mar.kolya@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47843 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: enable CPS for mt7621John Crispin2015-12-111-1/+1
| | | | | | | | | | | | | Enables CPS multiprocessing instead ob obsoleted CMP for mt7621. This patch fixes a few issues currently existing on 4.3 kernel with at least ubnt-erx: * iperf shows only 50Mbits on direct gigabit connection to desktop, * ping times jump to 5-6ms to dorectly connected desktop * /proc/interrupts shows spurious interrups (ERR) Signed-off-by: Nikolay Martynov <mar.kolya@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47842 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: mt7621: use symbolic names of gic interrupt settingsJohn Crispin2015-12-1111-18/+30
| | | | | | | | This also adds dts nodes for cpc and mc for documentation purposes Signed-off-by: Nikolay Martynov <mar.kolya@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47836 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ralink: bump to the target to v4.3John Crispin2015-12-101-14/+18
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47831 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: adapt VoCore to new second spi device codeJohn Crispin2015-11-283-70/+66
| | | | | | Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47667 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ralink: add support for netis WF-2881John Crispin2015-11-241-0/+133
| | | | | | | | | | | | | | | | | | | | | | | | | netis WF-2881 is an MT7621AT based router with MT7602EN, MT7612EN. It has 128MB DDR3, 128MB SLC NAND FLASH, 5-port Gbps switch and 1x USB 3.0. The following patch adds support for this device. this device only works on top of UBI. Tested and working: * ethernet * both WiFi radios * USB 3.0 * buttons (reset button) * ethernet switch and USB diag LEDs * UART * GPIOs * sysupgrade Tested and not working * failsafe Signed-off-by: YounJae Rho <luxflow@live.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47619 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: add support for Youku YK1John Crispin2015-11-241-0/+127
| | | | | | | | | Changes since V1: I resend this patch for current trunk.The former V1 patch is for CC branch. Signed-off-by: Shonn Lu <countrysideboy@qq.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47617 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: update dtsi files to support second spi deviceJohn Crispin2015-11-226-12/+143
| | | | | | Signed-off-by: Michael Lee <igvtee@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47580 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: init usb power for Lenovo Y1SJohn Crispin2015-11-211-0/+21
| | | | | | Signed-off-by: Shonn Lu <countrysideboy@qq.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47557 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: minor tweak to the lks7688 baord nameJohn Crispin2015-11-051-1/+1
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47388 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: add support for ZBT WG2626John Crispin2015-11-021-0/+127
| | | | | | Signed-off-by: Daniel Golle <daniel@makrotopia.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47351 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: add eeprom mtd partition to the Asus RP-N53 dtsJohn Crispin2015-11-021-0/+4
| | | | | | | | This patch adds the eeprom property to the dts for the Asus RP-N53. It is necessary to get the wifi in the soc working. Signed-off-by: Alberto Mattea <alberto@mattea.info> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47350 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: add support for Dovado tiny ACJohn Crispin2015-11-021-0/+166
| | | | | | | | | | | | | | | | Add support for Dovado tiny AC wifi router. Soc: mt7620a ram: 64MB flash: 8MB 1x usb 2.0 two gigabit lan ports 5ghz wlan is not supported on this board since there is no gpl driverfor mt7610e wifi chip. Signed-off-by: Andrej Vlasic <andrej.vlasic0@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47348 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: add alsa supportJohn Crispin2015-10-191-0/+111
| | | | | | | | | add the SDK alsa driver. this has only been tested on mt7628/88 and wm8960. mt7620 is only compile tested. Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47205 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: add LinkIt Smart7688 supportJohn Crispin2015-10-191-0/+173
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47203 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: fix /target/linux/ramips/dts/HC5XXX.dtsiJohn Crispin2015-10-071-2/+0
| | | | | | | | dtb complained about those lines Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47151 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: add support for 16MB VoCoreJohn Crispin2015-10-053-34/+82
| | | | | | Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47120 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: fix size-cells for spi nodesJohn Crispin2015-10-056-6/+6
| | | | | | Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47119 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: Add DTS files for HiWiFi HC5x61 modelsJohn Crispin2015-10-054-0/+299
| | | | | | | | | | | | | | HiWiFi HC5661/5761/5861 models are manufactured by http://www.hiwifi.com. These models have similar hardware specs(MT7620A + 128M DDR2 + 16M flash). This patch adds support for them. The original author is Justin Liu (rssnsj@gmail.com). I ported the patch to trunk and submitted it here with his approval. v3 fix 1: Merged most stuff into dtsi file 2: Remove unnecessary empty lines. Signed-off-by: Xiaoning Kang <kangxn@163.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47112 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ralink: add irq to mt7628 gpio nodeJohn Crispin2015-10-011-0/+3
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47076 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: Fix pinmux functions for MT7621John Crispin2015-09-161-7/+7
| | | | | | | | | The pinctrl-rt2880 code doesn't support multiple functions with the same name. This will result in a incorrect pinmux configuration. Signed-off-by: Sven Eckelmann <sven@open-mesh.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46963 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: Added WIZnet WizFi630A Platform based on Ralink RT5350John Crispin2015-09-141-0/+180
| | | | | | | | This patch is to add the WIZnet WizFi630A board as a new platform. The board is in mini pci express form factor. Signed-off-by: Tobias Welz <tw@wiznet.eu> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46921 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: add support for Planex DB-WRT01John Crispin2015-09-141-0/+100
| | | | | | | | | | This patch add support for Planex DB-WRT01. DANBOARD route on the MT7620A SoC with two Ethernet port and a 802.11n 2.4 GHz radio. DANBOARD is Cartoon character. Signed-off-by: YuheiOKAWA <tochiro.srchack@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46918 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: enable external amplifier for Xiaomi MiWiFi MiniFelix Fietkau2015-09-121-0/+5
| | | | | | | | Attempt to boost the 2.4 GHz signal, currently very low. Signed-off-by: D. Andrei Măceș <dmaces@nd.edu> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46891 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: use consistent naming scheme for LEDsJohn Crispin2015-08-1778-267/+267
| | | | | | | | | | | | | The upstream LED naming convention is "device:color:led-name", but it seems that many of supported boards in OpenWrt don't follow this approach. The following patch fixes this inconsistency in dts{,i} files and updates base-files scripts for ramips target: * fixes wrong indentation * keeps case statements structure in same convention as in other scripts (no empty line after ";;", no indentation for case...esac body) * fixes wrong LED names for some of boards (makes them the same as in dts{,i} files) * combines boards with same configuration (ex. set_wifi_led "rt2800pci-phy0::radio" in 01_leds) Signed-off-by: Piotr Dymacz <pepe2k@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46664 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: fix 7Links PX-4885 dts{, i}, board, image and profile namesJohn Crispin2015-08-173-5/+5
| | | | | | | | The following patch changes 7Links PX-4885 dts{,i} filenames, board, image and profile names from "PX4885" to "PX-4885" (for consistency). Signed-off-by: Piotr Dymacz <pepe2k@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46629 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: fix Buffalo WMR-300 dts, board, image and profile namesJohn Crispin2015-08-171-3/+3
| | | | | | | | The following patch changes Buffalo WMR-300 dts filename, board, image and profile names from "WMR300" to "WMR-300" (for consistency). Signed-off-by: Piotr Dymacz <pepe2k@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46628 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: fix Omnima models, images and profiles namesJohn Crispin2015-08-173-15/+15
| | | | | | | | | | | | | | | | | | | | Official names for supported Omnima products are (as on website): * Omnima HPM * Omnima MiniEMBWiFi * Omnima MiniEMBPlug This patch changes: * board names * dts filenames * profile names * image filenames * LED names for Omnima devices, for consistency. Signed-off-by: Piotr Dymacz <pepe2k@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46627 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: fix Tenda W150M model nameJohn Crispin2015-08-171-2/+2
| | | | | | Signed-off-by: Piotr Dymacz <pepe2k@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46625 3c298f89-4303-0410-b956-a3cf2f4a3e73
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-20 23:34:35 +0000