aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ar71xx
Commit message (Collapse)AuthorAgeFilesLines
* ar71xx: rb91x: fix ethernet packet loss issuesGabor Juhos2014-04-131-0/+19
| | | | | | | | | | | | | | The RB91x boards are suffering from ethernet packet loss after a cold boot. The cause of the problem is that the AR8035 PHYs requires special register settings to work reliably on these boards. Enable the RGMII TX, RX delays and disable SmartEE functionality of the AR8035 PHYs. Also enable the RXD delay in the ETH_CFG register to fix the issue. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40509 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx/mikrotik: enable the AT803x PHY driverGabor Juhos2014-04-131-0/+1
| | | | | | | | It will be used on the RB91x boards. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40508 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: allow to configure AR803x PHYs via platform dataGabor Juhos2014-04-131-0/+134
| | | | | | | | | Add a patch for the at803x phy driver, in order to be able to configure some register settings via platform data. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40507 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add phy_mmd_{read,write} helpersGabor Juhos2014-04-131-0/+40
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40506 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: enable console on the RB91x boardsGabor Juhos2014-04-131-2/+3
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40505 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add profile and build image for the ZyXEL NBG6716 boardGabor Juhos2014-04-133-0/+88
| | | | | | | | | Signed-off-by: André Valentin <avalentin@marcant.net> Patchwork: http://patchwork.openwrt.org/patch/5101/ [juhosg: remove the non-existing zyxelnand subtarget specific stuff] Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40502 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add user-space support for the ZyXEL NBG6716 boardGabor Juhos2014-04-134-0/+21
| | | | | | | | | Signed-off-by: André Valentin <avalentin@marcant.net> Patchwork: http://patchwork.openwrt.org/patch/5101/ [juhosg: use zyxel prefix in LED names] Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40500 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add kernel support for ZyXEL NBG 6716Gabor Juhos2014-04-134-2/+325
| | | | | | | | | | | | | | | | | | | | | | With this patch OpenWRT supports the following on the ZyXEL NBG 6716: -WiFi 2G (ath9k) -WiFi 5G (ath10k) -NAND flash -2 Ethernet interfaces -USB 2.0 -LEDs including switch -reasonale defaults at first boot Signed-off-by: André Valentin <avalentin@marcant.net> Patchwork: http://patchwork.openwrt.org/patch/5101/ [juhosg: - rename and refresh kernel patch, - fix a few typos, - change button key codes, - use zyxel prefix in LED names] Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40499 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: build firmware image for the WNDR3700 v4 boardGabor Juhos2014-04-122-4/+8
| | | | | | | | | Based on the the WNDR3700v4 support patch from Ralph Perlich: http://patchwork.openwrt.org/patch/4763/ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40481 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx/image: allow to use more arguments for some macrosGabor Juhos2014-04-121-7/+7
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40480 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: wndr4300: indicate WNDR3700v4 in the kernel support filesGabor Juhos2014-04-122-4/+4
| | | | | | | | | Apart from the wireless chip, the WNDR3700 v4 and the WNDR4300 is the same device. Indicate this in the kernel files. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40479 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: wndr4300: enable 5V power for the USB portGabor Juhos2014-04-121-0/+9
| | | | | | | | | | | | | | The 5V power of the USB is controlled by a GPIO pin of the external WiFi chip. Setup the GPIO bitmasks in the platform data of the WiFi chip to ensure that the 5V power gets enabled by the ath9k driver. Based on the the WNDR3700v4 support patch from Ralph Perlich: http://patchwork.openwrt.org/patch/4763/ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40478 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: wndr4300: use KEY_RFKILL code for the Wireless buttonGabor Juhos2014-04-121-1/+1
| | | | | | | | | Based on the the WNDR3700v4 support patch from Ralph Perlich: http://patchwork.openwrt.org/patch/4763/ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40477 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add default LED config for WiFi LEDs on the WNDR4300Gabor Juhos2014-04-121-0/+2
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40476 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: wndr4300: add LED for 2.4Ghz wifi interfaceGabor Juhos2014-04-121-0/+6
| | | | | | | | | Based on the the WNDR3700v4 support patch from Ralph Perlich: http://patchwork.openwrt.org/patch/4763/ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40475 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: wndr4300: select GPIO_OUT functionality for LED GPIOsGabor Juhos2014-04-121-0/+6
| | | | | | | | | The bootloader does not initializes the output function correctly for all LEDs. DO that from the board setup code. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40474 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: wndr4300: change 'orange' to 'amber' in LED color namesGabor Juhos2014-04-122-9/+14
| | | | | | | | | | | | The hardware manual says amber so change the color part of the LED names to reflect that. Also update the constant names. Based on the the WNDR3700v4 support patch from Ralph Perlich: http://patchwork.openwrt.org/patch/4763/ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40473 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: fix typos in TP-Link rssileds definitionGabor Juhos2014-04-121-2/+2
| | | | | | | | Signed-off-by: Felix Kaechele <heffer@fedoraproject.org> Patchwork: http://patchwork.openwrt.org/patch/5109/ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40472 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add rssileds for Ubiquiti XM boardsGabor Juhos2014-04-121-0/+9
| | | | | | | | | | | Adds support for the received signal strength indicator LEDs of the Bullet M, Nanostation M and Rocket M devices. Signed-off-by: Felix Kaechele <heffer@fedoraproject.org> Patchwork: http://patchwork.openwrt.org/patch/5108/ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40471 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kernel: update 3.10 to 3.10.36Gabor Juhos2014-04-121-1/+1
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40467 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: fix image generationGabor Juhos2014-04-121-5/+5
| | | | | | | | | Move the comments out from the shell script to fix build breakage introduced in r40464. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40466 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: avoid spurious restarts caused by the watchdog on AR934xGabor Juhos2014-04-122-1/+49
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40465 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add comments for image Makefile.Gabor Juhos2014-04-121-0/+50
| | | | | | | | Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com> Patchwork: http://patchwork.openwrt.org/patch/5075/ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40464 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: initial support for TP-Link Archer C7v2Gabor Juhos2014-04-122-2/+4
| | | | | | | | | | | | | | | | | | The C7v2 has 16 MB flash and QCA9880-BR4A rev 2 supported by ath10k driver. The C7v1 had 8 MB flash and the unsupported QCA9880-AR1A rev 1. Signed-off-by: Adam Serbinski <adam@serbinski.com> Patchwork: http://patchwork.openwrt.org/patch/5071/ [juhosg: - remove the v2 specific profile add the ath10k driver to the existing Archer C7 profile instead. Although on v1 devices it does not change the non-working behaviour, but the ath10k driver is useful for users whom have replaced the wifi card with a supported one in their units. - update image/Makefile to build firmware image for both boards if the Archer C7 profile is selected] Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40463 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: move some always-used led related functionality from kmod packages ↵Felix Fietkau2014-04-072-5/+2
| | | | | | | | to the kernel image Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40413 3c298f89-4303-0410-b956-a3cf2f4a3e73
* /lib/functions.sh: move rarely used mtd and macaddr related functions to ↵Felix Fietkau2014-04-071-0/+1
| | | | | | | | /lib/functions/system.sh Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40411 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add support for the TP-LINK TL-WR841N/ND v9Felix Fietkau2014-04-079-1/+196
| | | | | | | | | | Everything seems to be working fine. Potential issues: * VLAN port IDs are reversed with regard to the numbers on the case. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40400 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add support for QCA953x SoCFelix Fietkau2014-04-073-0/+447
| | | | | | | | | | | | | | | | | I don't have access to the specs, so I'm not sure about every detail, but I haven't seen any problems with my test system, a TL-WR841N v9. It looks pretty much like a QCA955x without PCI, a little twist in the clock calculation and a AR9331-compatible switch. Features not yet supported: * EHCI (my test system doesn't have USB) * ? (I have no idea if the QCA953x has any other features I don't know about that aren't used by the TL-WR841N v9) Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40399 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kernel: update 3.10 to 3.10.34Gabor Juhos2014-03-272-38/+1
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40291 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: build image for TL-WDR4300v1 (IL)Gabor Juhos2014-03-272-1/+6
| | | | | | | | | | | The version of TL-WDR4300 sold in Israel comes with a different hardware id. Patch-by: Daniel <daniel@makrotopia.org> Patchwork: http://patchwork.openwrt.org/patch/5001/ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40038 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add profile and build firmware image for the Oolite v1 boardGabor Juhos2014-03-272-0/+20
| | | | | | | | Patch-by: Lars Bøgild Thomsen <lth@cow.dk> Patchwork: http://patchwork.openwrt.org/patch/4922/ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40036 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add user space support for the Oolite v1 boardGabor Juhos2014-03-274-0/+11
| | | | | | | | | Patch-by: Lars Bøgild Thomsen <lth@cow.dk> Patchwork: http://patchwork.openwrt.org/patch/4922/ [juhosg: use correct board name in uci-defaults/02_network] Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40033 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add kernel support for the Oolite v1 boardGabor Juhos2014-03-273-0/+143
| | | | | | | | | | | | | | Patch-by: Lars Bøgild Thomsen <lth@cow.dk> Patchwork: http://patchwork.openwrt.org/patch/4922/ [juhosg: - use a separate patch for kernel changes, - reorder Kconfig and Makefile entries, - change function and variable names to be lowercase only and fix misaligned tabs in mach-gs-oolite.c, ... ] Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40032 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: rename RB951Ui specific kernel patchGabor Juhos2014-03-271-0/+0
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40031 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: rb95x: use correct SPI flash addressGabor Juhos2014-03-121-1/+1
| | | | | | | | | | | The flash address passed to rb_init_info() is bogus, use the predefined AR71XX_SPI_BASE macro instead. Compile tested only. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39891 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: ar934x_nfc: fix memory initialization bugGabor Juhos2014-03-121-1/+1
| | | | | | | | | | | sizeof(array_from_function_definition) gives back the size of the pointer. sizeof(type) * array_size should be used in memset. Signed-off-by: David Völgyes <david.volgyes@gmail.com> Patchwork: http://patchwork.openwrt.org/patch/4950/ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39890 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: Add 16MB Flash version for Embedded Wireless Dorin PlatformFelix Fietkau2014-02-281-1/+3
| | | | | | Signed-off-by: Embedded Wireless GmbH <info at embeddedwireless.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39764 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: adjust ew-dorin platform for LAN+WAN setupFelix Fietkau2014-02-281-2/+3
| | | | | | Signed-off-by: Embedded Wireless GmbH <info at embeddedwireless.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39763 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: fix failsafe acces on several devicesGabor Juhos2014-02-251-1/+35
| | | | | | | | | | | | | | The ar71xx platform always uses the eth0 interface to provide access to the device in failsafe mode. Due to this, failsafe access is broken on devices where the LAN ports are connected to the 'eth1' interface. Update the relevant script to correctly set the ifname variable for these devices. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39752 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kernel: update 3.10 to 3.10.32Gabor Juhos2014-02-233-4/+4
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39707 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: define status LED for the RB91x boardsGabor Juhos2014-02-232-0/+18
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39705 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: rb91x: register GPIO LEDsGabor Juhos2014-02-231-0/+51
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39704 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: rb91x: add SPI device for the serial shift registerGabor Juhos2014-02-232-3/+63
| | | | | | | | | | | | | The RB91x boards are using a serial shift register connected to the SPI bus to drive some of the LEDs. Rework the board setup code to register a SPI device for that. This makes it possible to use the 'spi-74x164' driver to control the device. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39703 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx/mikrotik: enable the 74x164 GPIO driverGabor Juhos2014-02-231-0/+1
| | | | | | | | | That will be used to drive the 74HC595 serial-in/parallel-out 8-bits shift register which can be found on some RouterBOARDs. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39702 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: improve platform device support in the gpio-74x164 driverGabor Juhos2014-02-231-0/+74
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39701 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: rb91x-nand: rewrite to use GPIO APIGabor Juhos2014-02-233-115/+174
| | | | | | | | | Rewrite tha rb91x-nand driver to use GPIO API to modify the NAND control lines. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39700 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: rb91x: register a gpio-latch platform deviceGabor Juhos2014-02-221-0/+21
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39699 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx/mikrotik: enable the GPIO latch driverGabor Juhos2014-02-221-1/+1
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39698 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add a generic GPIO latch driverGabor Juhos2014-02-224-0/+256
| | | | | | | | It will be used for the Mikrotik boards. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39697 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx/mikrotik: enable small sector erase in the m25p80 driverGabor Juhos2014-02-221-0/+1
| | | | | | | | | | | The serial flash devices used on the ROuterBOARDs are supporting 4KiB erase blocks. Enable the small sector erase option in the m25p80 driver to avoid superfluous erase/write of adjacent blocks. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39696 3c298f89-4303-0410-b956-a3cf2f4a3e73
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-25 01:17:49 +0000