aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* ramips: move patches aroundJohn Crispin2015-08-171-0/+0
| | | | | | | | 0073 needs to applied afert 0102 Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46667 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ugps: update to latest git HEADJohn Crispin2015-08-171-2/+2
| | | | | | | | | | fixes 2 bugs * typo * use %04d rather than %d when printing the position Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46666 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: base-files: optimize etc/diag.sh and etc/board.d/01_leds scriptsJohn Crispin2015-08-172-424/+235
| | | | | | | | | | | | | | | | | | | | | | | | Instead of using board name provided explicitly as text in LED name, ex.: [...] mlwg2) status_led="mlwg2:blue:system" [...] use $board variable, which allows to combine together multiple boards with same color and LED names, ex: [...] mlw221|\ mlwg2) status_led="$board:blue:system" [...] The above approach allows to shrink size of code in base-files/etc/board.d/01_leds and base-files/etc/diag.sh scripts dramatically. One thing to keep in mind here is that we assume to use proper and consistent LED naming scheme ("device:color:led-name"). Signed-off-by: Piotr Dymacz <pepe2k@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46665 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: use consistent naming scheme for LEDsJohn Crispin2015-08-1780-612/+694
| | | | | | | | | | | | | The upstream LED naming convention is "device:color:led-name", but it seems that many of supported boards in OpenWrt don't follow this approach. The following patch fixes this inconsistency in dts{,i} files and updates base-files scripts for ramips target: * fixes wrong indentation * keeps case statements structure in same convention as in other scripts (no empty line after ";;", no indentation for case...esac body) * fixes wrong LED names for some of boards (makes them the same as in dts{,i} files) * combines boards with same configuration (ex. set_wifi_led "rt2800pci-phy0::radio" in 01_leds) Signed-off-by: Piotr Dymacz <pepe2k@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46664 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add support for TP-Link TL-WDR6500 v2John Crispin2015-08-1711-1/+258
| | | | | | | | | | | Signed-off-by: Weijie Gao <hackpascal@gmail.com> This patch adds support for TP-Link TL-WDR6500 v2. The firmware has a U-Boot header for kernel, and a TP-LINK v2 header for the whole firmware, so I have to create a new firmware creation method. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46663 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add 64kb bootloader mtd parser for tplinkpartJohn Crispin2015-08-171-6/+29
| | | | | | | | | | | Signed-off-by: Weijie Gao <hackpascal@gmail.com> This patch adds flash layout parser for TP-Link firmwares which have a 64kb bootloader. This is used for TP-Link TL-WDR6500 v2. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46662 3c298f89-4303-0410-b956-a3cf2f4a3e73
* tools/firmware-utils: add header version 2 support for mktplinkfwJohn Crispin2015-08-171-4/+21
| | | | | | | | | | | | | | | | Signed-off-by: Weijie Gao <hackpascal@gmail.com> This patch adds header version 2 option for mktplinkfw. The version 2 header is used for AR/QCA firmwares and is not the same as the header generated by mktplinkfw2. Instead, it is nearly the same as version 1 header except for the header version and the RSA signature. The header version 2 support is used for newer TP-Link routers which have only a 64kb bootloader part, e.g. TL-WDR6500 v2. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46661 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: reorder the sysupgrade scriptJohn Crispin2015-08-171-13/+13
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46660 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: reorder patchesJohn Crispin2015-08-1711-5/+3
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46659 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ipq806x: switch AP148 to using SMEM based MTD parserJohn Crispin2015-08-1713-63/+35
| | | | | | | | | | | | | | *Enable SMEM MTD parser and its dependencies (SMEM & HW spinlocks) in the kernel config *Replaces the MTD layout in DT by the dynamic layout provided by the SMEM parser for AP148 Using the OF based parser is still possible on platforms which have a fixed MTD partition layout. Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46658 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ipq806x: add QCOM SMEM based MTD parserJohn Crispin2015-08-172-0/+554
| | | | | | | | | This patch adds a new parser which uses the SMEM available on IPQ and some other QCOM platforms to map the MTD partitions. Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46657 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ipq806x: add SMEM supportJohn Crispin2015-08-176-0/+1918
| | | | | | | | | | | | 2 patches are cherry-picked from the following LKML thread: *https://lkml.org/lkml/2015/4/11/208 The last patch (036-soc-qcom-add-smem-to-IPQ806x-platforms.patch) is adding the corresponding DT nodes required for IPQ806x. Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46656 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ipq806x: add hwspinlock supportJohn Crispin2015-08-1719-28/+958
| | | | | | | | | | | | | | This change cherry-picks the following 3 changes from linux-next: *fb7737 hwspinlock/core: add device tree support *19a0f6 hwspinlock: qcom: Add support for Qualcomm HW Mutex block *bd5717 hwspinlock: qcom: Correct msb in regmap_field We're also adding a patch to add the hardware spinlock device nodes on IPQ806x platforms (033-soc-qcom-Add-sfbp-device-to-IPQ806x-dts.patch). Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46655 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kernel: move linux, part-probe dt parsing in generic codeJohn Crispin2015-08-1718-53/+229
| | | | | | | | | | | | | | The "linux,part-probe" dts parsing is a pretty neat generic feature. It has been posted to kernel.org and could easily be reused by all targets. This change moves the patch to the 3.18 and 4.1 generic folders, and makes the feature available to all platforms who may want to use it. Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org> Acked-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46654 3c298f89-4303-0410-b956-a3cf2f4a3e73
* base-files: default_postinst: propagate the real postinst return codeJohn Crispin2015-08-171-3/+7
| | | | | | | | | | | Using the postinst script for sanity checks and expecting opkg to fail if the postinst didn't return 0 was possible in Barrier Breaker, propagate the real postinst return code through default_postinst to restore this behaviour. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46653 3c298f89-4303-0410-b956-a3cf2f4a3e73
* hostapd: Add vlan_file option to netifd.shJohn Crispin2015-08-171-1/+6
| | | | | | | | | | | | | Other VLAN related options are already being processed in netifd.sh but the vlan_file option is missing. This option allows the mapping of vlan IDs to network interfaces and will be used in dynamic VLAN feature for binding stations to interfaces based on VLAN assignments. The change is done similarly to the wpa_psk_file option. Signed-off-by: Gong Cheng <chengg11@yahoo.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46652 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: Add support for Black SwiftJohn Crispin2015-08-1710-0/+172
| | | | | | | | | | | | Add support for the Black Swift board: http://www.black-swift.com/ Took relevant parts and slightly adapted from: https://github.com/blackswift/openwrt/blob/master/bsb.patch Signed-off-by: Bruno Randolf <br1@einfach.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46651 3c298f89-4303-0410-b956-a3cf2f4a3e73
* base-files: rework reset button script to indicate factory resetJohn Crispin2015-08-171-14/+21
| | | | | | | | | With this change we let user know 5 seconds have passed and reset button can be released (to trigger factory reset) Signed-off-by: Rafał Miłecki <zajec5@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46650 3c298f89-4303-0410-b956-a3cf2f4a3e73
* at91: Backport determine_rate prototype fixJohn Crispin2015-08-171-0/+20
| | | | | | | | | | | | | This patch is backport of a fix to a USB prototype mismatch bug found in 3.18 kernels, originally submitted by Boris Brezillon [1]. The symptom of this bug was that devices attached to the at91 using at91_ohci on a hub never appeared and failed to initialise. [1] http://www.spinics.net/lists/linux-usb/msg125969.html Signed-off-by: Ben Whitten <ben.whitten@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46649 3c298f89-4303-0410-b956-a3cf2f4a3e73
* mcs814x: use firmware partition splitter on dLAN USB ExtenderJohn Crispin2015-08-173-9/+5
| | | | | | | | | to avoid editing the dts every time the kernel size changes. uImage is now bigger than 1MB. Pad uImage to 64k erase block size. Signed-off-by: Günther Kelleter <guenther.kelleter@devolo.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46648 3c298f89-4303-0410-b956-a3cf2f4a3e73
* mcs814x: fix interrupt handlingJohn Crispin2015-08-172-22/+27
| | | | | | | | | | Switch to generich chip irqs/irq domains. Interrupts were broken since kernel 3.14. dLAN USB extender is now booting again. Signed-off-by: Günther Kelleter <guenther.kelleter@devolo.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46647 3c298f89-4303-0410-b956-a3cf2f4a3e73
* mcs814x: fix debug UARTJohn Crispin2015-08-172-3/+48
| | | | | | | | | | Switch to new 8250 debug uart code because the old mach-mcs814x/include/mach/debug-macro.S tries to include asm/hardware/debug-8250.S which no longer exists since kernel 3.14 Signed-off-by: Günther Kelleter <guenther.kelleter@devolo.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46646 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: Fix MT7621 pinmux bits for uart3, uart2, mdioJohn Crispin2015-08-171-9/+26
| | | | | | | | | | | The MT7621 uses a 2 bit wide configuration of the sdhci, spi, mdio, pcie, wdt, uart2 and uart3 in the GPIO_MODE register. It was correctly done for sdhci, spi, pcie and wdt, The same has to be done for uart3, uart2 and mdio. Signed-off-by: Sven Eckelmann <sven@open-mesh.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46645 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: Fix amount of MT7621 pins controlled by spi groupJohn Crispin2015-08-171-1/+1
| | | | | | | | | The PINS conntrolled by the SPI bits in the GPIO_MODE register is always 7 and not 8 for nand mode. Signed-off-by: Sven Eckelmann <sven@open-mesh.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46644 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: Fix uart2/uart3 pinmux order on MT7621John Crispin2015-08-171-4/+4
| | | | | | | | | The uart3 setting in GPIO_MODE register is before the uart2 setting. Also don't mix uart2 and uart3 function/groups. Signed-off-by: Sven Eckelmann <sven@open-mesh.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46643 3c298f89-4303-0410-b956-a3cf2f4a3e73
* brcm2708: override disabled device tree module status from config.txtJohn Crispin2015-08-171-0/+6
| | | | | | Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46642 3c298f89-4303-0410-b956-a3cf2f4a3e73
* brcm2708: fix kmod-sound-soc-iqaudio-dac and add missing symbolJohn Crispin2015-08-171-2/+6
| | | | | | Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46641 3c298f89-4303-0410-b956-a3cf2f4a3e73
* brcm2708: update 4.1 patchesJohn Crispin2015-08-17147-244/+3456
| | | | | | Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46640 3c298f89-4303-0410-b956-a3cf2f4a3e73
* brcm2708: use BuildDTB in image/MakefileJohn Crispin2015-08-171-1/+1
| | | | | | Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46639 3c298f89-4303-0410-b956-a3cf2f4a3e73
* brcm2708-gpu-fw: update to latest versionJohn Crispin2015-08-171-3/+3
| | | | | | Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46638 3c298f89-4303-0410-b956-a3cf2f4a3e73
* oxnas: switch to kernel 4.1John Crispin2015-08-171-1/+1
| | | | | | Signed-off-by: Daniel Golle <daniel@makrotopia.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46637 3c298f89-4303-0410-b956-a3cf2f4a3e73
* oxnas: prepare for kernel 4.1John Crispin2015-08-1715-1/+788
| | | | | | Signed-off-by: Daniel Golle <daniel@makrotopia.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46636 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: remove unnecessary LED declaration for WT1520 in diag.shJohn Crispin2015-08-171-3/+0
| | | | | | | | This device doesn't have defined LEDs in its dts file. Signed-off-by: Piotr Dymacz <pepe2k@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46635 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: fix indentation, case statements structure and optimize ↵John Crispin2015-08-171-220/+170
| | | | | | | | | | | | | | | | | | | base-files/etc/board.d/02_network The following patch: * fixes wrong indentation * combines together boards with same configuration * removes unnecessary spaces * removes empty lines after ";;" and uses only "|\" (for consistency) * orders boards alphabetically in base-files/etc/board.d/02_network script. One bug was left untouched: freestation5 board is listed twice in case statement, in ramips_setup_macs(). Signed-off-by: Piotr Dymacz <pepe2k@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46634 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: be consistent with case statement in base-files/lib/upgrade/platform.shJohn Crispin2015-08-171-117/+117
| | | | | | | | Always use "|\" (without spaces) and keep boards in alphabetical order. Signed-off-by: Piotr Dymacz <pepe2k@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46633 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: remove leading spaces, sort boards and optimize base-files/lib/ramips.shJohn Crispin2015-08-171-217/+217
| | | | | | | | | | | | | | | | | | This patch: * fixes various mistakes (leading spaces, wrong or missing model names) * shortens model strings (we don't need to use whole model string from dts file, make it for consistency and as optimization) * sorts boards alphabetically in base-files/lib/ramips.sh script. Case statement was tested after above changes with simple script, which: * takes model string from dts{,i} file (model = "...") * provides this value as case input ($machine) * returns output ($name) Signed-off-by: Piotr Dymacz <pepe2k@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46632 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: fix various mistakes in subtargets *.mk profilesJohn Crispin2015-08-1738-166/+141
| | | | | | | | | | | | | | | | This patch: * fixes wrong indentation * fixes wrong names and descriptions (ex. Dlink -> D-Link) * changes filenames to manufacturer names * moves oem/unknown manufacturers boards to misc.mk profiles * combines profiles for boards from the same manufacturers in one file (ex. Olimex) * fix profile files structure (keep the same convention as in other targets, ex. ar71xx) in various .mk profiles, in ramips target. Signed-off-by: Piotr Dymacz <pepe2k@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46631 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: remove old code for Edimax BR-6524NJohn Crispin2015-08-174-25/+0
| | | | | | | | | It seems that support for Edimax BR-6524N was dropped long time ago (dts file for this device is missing). This patch removes remaining code. Signed-off-by: Piotr Dymacz <pepe2k@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46630 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: fix 7Links PX-4885 dts{, i}, board, image and profile namesJohn Crispin2015-08-179-19/+17
| | | | | | | | The following patch changes 7Links PX-4885 dts{,i} filenames, board, image and profile names from "PX4885" to "PX-4885" (for consistency). Signed-off-by: Piotr Dymacz <pepe2k@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46629 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: fix Buffalo WMR-300 dts, board, image and profile namesJohn Crispin2015-08-176-10/+10
| | | | | | | | The following patch changes Buffalo WMR-300 dts filename, board, image and profile names from "WMR300" to "WMR-300" (for consistency). Signed-off-by: Piotr Dymacz <pepe2k@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46628 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: fix Omnima models, images and profiles namesJohn Crispin2015-08-1710-47/+49
| | | | | | | | | | | | | | | | | | | | Official names for supported Omnima products are (as on website): * Omnima HPM * Omnima MiniEMBWiFi * Omnima MiniEMBPlug This patch changes: * board names * dts filenames * profile names * image filenames * LED names for Omnima devices, for consistency. Signed-off-by: Piotr Dymacz <pepe2k@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46627 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: fix Edimax BR-6425 board nameJohn Crispin2015-08-173-3/+3
| | | | | | Signed-off-by: Piotr Dymacz <pepe2k@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46626 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: fix Tenda W150M model nameJohn Crispin2015-08-171-2/+2
| | | | | | Signed-off-by: Piotr Dymacz <pepe2k@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46625 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: fix Aigale Ai-BR100 dts and profile namesJohn Crispin2015-08-173-6/+6
| | | | | | | | The following patch changes dts filename and profile name for Aigale Ai-BR100 (for consistency). Signed-off-by: Piotr Dymacz <pepe2k@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46624 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: fix Olimex models, images and profiles namesJohn Crispin2015-08-177-25/+25
| | | | | | | | | | | | | | Official names for RT5350F based OLinuXino products are "RT5350F-OLinuXino{,-EVB}" as on official manufacturer website. The following patch: * changes board names from "olinuxino-rt5350f{,-evb}" to "rt5350f-olinuxino{,-evb}" * changes filenames of dts and profile files * changes image filenames for Olimex RT5350F-OLinuXino{,-EVB} devices. Signed-off-by: Piotr Dymacz <pepe2k@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46623 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: fix Sitecom WL-341v3 board and image namesJohn Crispin2015-08-174-15/+15
| | | | | | | | | | | | | The following patch changes: * board name from "wl341v3" to "wl-341v3" * dts filename * LED names in dts file for Sitecom WL-341v3 device. Signed-off-by: Piotr Dymacz <pepe2k@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46622 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: fix Argus ATP-52B board and image namesJohn Crispin2015-08-175-9/+9
| | | | | | | | | | | | | | The following patch: * changes board name from "argus-atp52b" to "atp-52b" * changes dts filename * fixes LED names in dts file and base-files scripts * removes manufacturer name from image filename for Argus ATP-52B device. Signed-off-by: Piotr Dymacz <pepe2k@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46621 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: fix Belkin F7C027 image nameJohn Crispin2015-08-171-1/+1
| | | | | | | | This patch removes manufacturer from Belkin F7C027 image name ("belkinf7c027" -> "f7c027"). Signed-off-by: Piotr Dymacz <pepe2k@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46620 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: fix Asus RT-N56U dts filenameJohn Crispin2015-08-172-2/+2
| | | | | | | | Other Asus RT-N dts files are named "RT-N..." (not "RTN..."), so use the same for RT-N56U. Signed-off-by: Piotr Dymacz <pepe2k@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46619 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: fix UPVEL model namesJohn Crispin2015-08-173-4/+4
| | | | | | Signed-off-by: Piotr Dymacz <pepe2k@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46618 3c298f89-4303-0410-b956-a3cf2f4a3e73
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-04 14:10:23 +0000