aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
...
* ar8216: add link change detection for switch portsFelix Fietkau2015-01-242-0/+36
| | | | | | | | | | Check for switch port link changes and - flush ATU in case of a change - report link change via syslog Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44102 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar8216: fix ATU flushingFelix Fietkau2015-01-242-9/+5
| | | | | | | | | | | | | | | | | | The functionality to flush the address translation table contains two bugs which luckily compensate each other. 1. Just setting the operation is not sufficient to perform the flushing. The "active" bit needs to be set to actually trigger an action. For the vtu operations this is implemented correctly. 2. ar8xxx_phy_read_status is called every 2s by the phy state machine to check for link changes. This would have caused an ATU flush every 2s. Fix the chip-specific ATU flush functions and remove the ATU flush call from ar8xxx_phy_read_status. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44101 3c298f89-4303-0410-b956-a3cf2f4a3e73
* mac80211/hostapd: fix HT mode setup for RSN ad-hoc networksFelix Fietkau2015-01-242-30/+35
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44100 3c298f89-4303-0410-b956-a3cf2f4a3e73
* relayd: prevent start for disabled interfacesFelix Fietkau2015-01-241-0/+3
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44099 3c298f89-4303-0410-b956-a3cf2f4a3e73
* netifd: fix a regression with some VLAN configurations introduced in the ↵Felix Fietkau2015-01-241-2/+2
| | | | | | | | last update Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44098 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ppp: on PPPoE, always send PADT when shutting down the connectionFelix Fietkau2015-01-241-0/+11
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44097 3c298f89-4303-0410-b956-a3cf2f4a3e73
* netifd: do not stop service on shutdown, only call ifdownFelix Fietkau2015-01-241-1/+1
| | | | | | | | Also add a small delay, like on restart Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44096 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ppp: rework host-uniq support to take hex encoded stringsJo-Philipp Wich2015-01-243-49/+149
| | | | | | | | | | | The previous implementation of the "host-uniq" option used plain strings for passing the value to pppd which made it impossible to specify binary data. Switch the format to a hex encoded string to support binary data. Signed-off-by: Jo-Philipp Wich <jow@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44094 3c298f89-4303-0410-b956-a3cf2f4a3e73
* netifd: update to the latest version, fixes bridge reload (#18351) and ↵Felix Fietkau2015-01-241-2/+2
| | | | | | | | device config issues Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44093 3c298f89-4303-0410-b956-a3cf2f4a3e73
* netifd: store additional DHCP lease informationJo-Philipp Wich2015-01-231-7/+7
| | | | | | | | | Extend the DHCPv4 handler script to store additional information from the DHCP lease in the per-interface data object. Signed-off-by: Jo-Philipp Wich <jow@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44092 3c298f89-4303-0410-b956-a3cf2f4a3e73
* include, base-files: align default repository url with changed buildbot ↵Jo-Philipp Wich2015-01-232-4/+3
| | | | | | | | structure Signed-off-by: Jo-Philipp Wich <jow@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44091 3c298f89-4303-0410-b956-a3cf2f4a3e73
* Revert "version.mk: add "%s" placeholder for dotted target.subtarget notation"Jo-Philipp Wich2015-01-231-2/+1
| | | | | | This reverts commit d388882dccc1b25575939c3713b3ab394c371fd0. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44090 3c298f89-4303-0410-b956-a3cf2f4a3e73
* Revert "version.mk: explicitely filter "generic" subtarget for "%s" ↵Jo-Philipp Wich2015-01-231-1/+1
| | | | | | | | placeholder (#18710)" This reverts commit d907396dc1c2ae0268dc54835b108afef4761d4e. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44089 3c298f89-4303-0410-b956-a3cf2f4a3e73
* scripts: remote-gdb: fix target / libc matching on directory namesJo-Philipp Wich2015-01-231-2/+2
| | | | | | Signed-off-by: Jo-Philipp Wich <jow@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44088 3c298f89-4303-0410-b956-a3cf2f4a3e73
* base-files: fix led script to skip missing triggersJohn Crispin2015-01-231-1/+5
| | | | | | | | this is based on http://patchwork.ozlabs.org/patch/424451/ Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44087 3c298f89-4303-0410-b956-a3cf2f4a3e73
* uboot-lantiq: add a cgu fix for arx100John Crispin2015-01-231-0/+148
| | | | | | | | http://patchwork.ozlabs.org/patch/431024/ Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44086 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add support for TP-LINK TL-WR843ND v1John Crispin2015-01-233-0/+16
| | | | | | | | | TP-LINK TL-WR843ND v1 is the same model like wr41, but with Power over Ethernet on wan port. Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44085 3c298f89-4303-0410-b956-a3cf2f4a3e73
* modules: add 6LoWPAN over Bluetooth Low EnergyJohn Crispin2015-01-231-0/+20
| | | | | | | | | | | Adding support 6LoWPAN over Bluetooth Low Energy in kernel 3.18. Creating new bluetooth_6lowpan group with CONFIG_6LOWPAN and CONFIG_BT_6LOWPAN. Adding kernel object dependencies for 6LoWPAN over Bluetooth Low Energy. Signed-off-by: Lukasz Duda <lukasz.duda@nordicsemi.no> Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44084 3c298f89-4303-0410-b956-a3cf2f4a3e73
* lantiq: correct value for fpi clock on ar9John Crispin2015-01-231-0/+21
| | | | | | | | | | | | | | | | | | | | | This adds a patch to target/linux/lantiq/patches-3.14 fixing a bug clock code on ar9. The current version returns the wrong value for the fpi clock frequency in some cases. See discussion for further details: https://lists.openwrt.org/pipermail/openwrt-devel/2015-January/030688.html I'm not sure about the patch naming and numbering convention. Do please let me know it this is not OK. Many thanks, Ben Mulvihill Signed-off-by: Ben Mulvihill <ben.mulvihill@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44083 3c298f89-4303-0410-b956-a3cf2f4a3e73
* gmp: use http instead of ftp download (#18805)Felix Fietkau2015-01-231-1/+1
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44082 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ubus: update to the latest versionFelix Fietkau2015-01-231-2/+2
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44081 3c298f89-4303-0410-b956-a3cf2f4a3e73
* libubox: update to the latest versionFelix Fietkau2015-01-231-2/+2
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44080 3c298f89-4303-0410-b956-a3cf2f4a3e73
* build: revert r44076John Crispin2015-01-223-36/+8
| | | | | | | | the patch causes issues when installing feeds Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44078 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add support for the UniFi AP Outdoor PlusJohn Crispin2015-01-226-3/+72
| | | | | | | | the GPIO controlling the rf filter is not configured properly by this patch. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44077 3c298f89-4303-0410-b956-a3cf2f4a3e73
* build: allow openwrt.git packages to be replaced by feedsJohn Crispin2015-01-223-8/+36
| | | | | | | | | | | | | | | | | | | | | Currently, replacing a package available in openwrt.git requires modifications in openwrt.git, or requires duplicating the package in a feed but with a different name, which causes all kind of problems related to dependencies (all packages selecting it would have to be modified accordingly to select the new package). With this change, if a package with the same name is present both in feeds/ and package/ folders, the one in feeds/ can override the one in package/, both in the menuconfig and during the build, by passing the "-f" option to "./scripts/feeds install" This mechanism is particularly useful for vendor tree, or in general for application which needs to replace one particular package which exists within openwrt.git by a custom/newer version. Signed-off-by: Mathieu Olivari <mathieu@qca.qualcomm.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44076 3c298f89-4303-0410-b956-a3cf2f4a3e73
* modules: f2fs: enable support for xattrJohn Crispin2015-01-221-1/+1
| | | | | | | | To use overlayfs on f2fs, xattr needs to be supported. Signed-off-by: Daniel Golle <daniel@makrotopia.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44075 3c298f89-4303-0410-b956-a3cf2f4a3e73
* modules: f2fs: add missing symbols for 3.18John Crispin2015-01-221-0/+2
| | | | | | Signed-off-by: Daniel Golle <daniel@makrotopia.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44074 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: add support for Tenda 3G150BJohn Crispin2015-01-228-1/+137
| | | | | | | | | | | | | | | Add suport for Tenda 3G150B: - cpu: Ralink RT5350F - flash: 4MB - ram: 32MB - 1x USB 2.0 - 1x RJ45 - one reset button - battery powered (BP-4L, 3.7V 1450mAh) Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44073 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: improve and fix Memory 2 Move supportJohn Crispin2015-01-223-19/+13
| | | | | | | | | | | | | | | | | This patch is a follow up for my previous patch: "ramips: add support for Intenso Memory 2 Move USB 3.0". It fixes a couple of errors in the DTS (one of which broke the gpio-buttons). The kmod-leds-gpio dependency has been dropped as it is already part of the ramips target. Furthermore the ramdisk/uImage image is generated by default for the rt3050 subtarget. This image is needed to flash OpenWrt for the first time onto the device via TFTP. Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44072 3c298f89-4303-0410-b956-a3cf2f4a3e73
* mcs814x: document how to include 3rd party binary packagesFlorian Fainelli2015-01-211-2/+9
| | | | | | | | | | The dLAN USB Extender profile was referecing binary packages which are not to be included in any of the source-only feeds. Instead remove these references and document how to use the 3rd party feed. Signed-off-by: Florian Fainelli <florian@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44071 3c298f89-4303-0410-b956-a3cf2f4a3e73
* bcm53xx: backport official Buffalo WZR-900DHP patchRafał Miłecki2015-01-2117-45/+174
| | | | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44070 3c298f89-4303-0410-b956-a3cf2f4a3e73
* bcm53xx: backport spi-nor changes to add gd25q128 supportRafał Miłecki2015-01-212-0/+232
| | | | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44069 3c298f89-4303-0410-b956-a3cf2f4a3e73
* modules: install the newly introduced grace.ko in nfs-common in 3.18Zoltan HERPAI2015-01-201-0/+8
| | | | | | | | Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44068 3c298f89-4303-0410-b956-a3cf2f4a3e73
* packages: uboot-sunxi: add support for Lamobo R1Zoltan HERPAI2015-01-202-0/+29
| | | | | | | | Signed-off-by: Daniel Golle <daniel@makrotopia.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44067 3c298f89-4303-0410-b956-a3cf2f4a3e73
* packages: uboot-sunxi: fix GMAC TX delay for BananapiZoltan HERPAI2015-01-201-0/+24
| | | | | | | | Signed-off-by: Daniel Golle <daniel@makrotopia.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44066 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add support for TL-WA701ND v2John Crispin2015-01-2010-1/+182
| | | | | | Signed-off-by: Luigi Tarenga <luigi.tarenga@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44063 3c298f89-4303-0410-b956-a3cf2f4a3e73
* nftables: bump for minor fixesSteven Barth2015-01-201-3/+3
| | | | | | Signed-off-by: Steven Barth <steven@midlink.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44062 3c298f89-4303-0410-b956-a3cf2f4a3e73
* polarssl: patch CVE-2015-1182Jo-Philipp Wich2015-01-202-2/+13
| | | | | | Signed-off-by: Jo-Philipp Wich <jow@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44060 3c298f89-4303-0410-b956-a3cf2f4a3e73
* bcm53xx: use final (backported) patch fixing serial consoleRafał Miłecki2015-01-206-13/+25
| | | | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44059 3c298f89-4303-0410-b956-a3cf2f4a3e73
* bcm53xx: backport 3 BCM5301X patches from Hauke repoRafał Miłecki2015-01-2016-71/+537
| | | | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44058 3c298f89-4303-0410-b956-a3cf2f4a3e73
* bcm53xx: rename patches modifying DTS filesRafał Miłecki2015-01-206-60/+34
| | | | | | | | | | Ths will allow us to use early 3xx numbers for patches designed for sending mainline. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44057 3c298f89-4303-0410-b956-a3cf2f4a3e73
* base-files: Use 200ms LED timing as before for the new phase preinit_regular.John Crispin2015-01-201-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | This restores normal pre-r43715 200ms blink-period for the System LED we're all accustomed to see while our OpenWrt routers are booting. Failsafe possibility will now be signalled with a new 100ms blinking, which is easily recognizable from the normal 200ms booting. So no existing user will be scared by a new 500ms LED pattern, since such a slow pattern could easily be mistaken for something wrong... I was like "ok why my router is collapsing now, is this a bad flash, a kernel panic, or what else" when I've seen it for the first time ;) Sorry for not having explained myself better in v1 of this patch. Original: Preinit, failsafe is possible: 200ms Preinit, failsafe not possible anymore, booting normally: 200ms Failsafe entered: 50ms Now (after preinit_regular has been introduced): Preinit, failsafe is possible: 200ms Preinit, failsafe not possible anymore, booting normally: 500ms *here is the "offending" change* Failsafe entered: 50ms With my proposed patch: Preinit, failsafe is possible: 100ms *indicate this condition with a new timing, that prompts the user to press the key if they want to start failsafe* Preinit, failsafe not possible anymore, booting normally: 200ms *keep this as before* Failsafe entered: 50ms Signed-off-by: Vittorio Gambaletta <openwrt@vittgam.net> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44056 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ralink: add support for firewrtJohn Crispin2015-01-206-1/+116
| | | | | | | | this is a mt7621 based board Signed-off-by: wengbj <linux.c@foxmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44055 3c298f89-4303-0410-b956-a3cf2f4a3e73
* comgt: Allow using non-TTY devicesJohn Crispin2015-01-201-0/+68
| | | | | | | | | | | | | Some Huawei mobile broadband sticks utilizing the NCM protocol expose the control channel as a cdc-wdm device node instead of a virtual TTY. This device node does not support the terminal ioctls. This patch adds a check whether the provided device is a TTY or not and does not attempt to use the terminal ioctls if they are not supported. v2: reduce diffstat by simplifying code a little Signed-off-by: Matti Laakso <malaakso@elisanet.fi> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44054 3c298f89-4303-0410-b956-a3cf2f4a3e73
* uclient: update to the latest version with timeout supportRafał Miłecki2015-01-191-2/+2
| | | | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44053 3c298f89-4303-0410-b956-a3cf2f4a3e73
* libubox: update to the latest commit with JSON and usock fixesRafał Miłecki2015-01-191-2/+2
| | | | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44052 3c298f89-4303-0410-b956-a3cf2f4a3e73
* bcm53xx: add support/firmware for Asus RT-AC87URafał Miłecki2015-01-193-0/+157
| | | | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44051 3c298f89-4303-0410-b956-a3cf2f4a3e73
* netifd: add option to customize IPv6 interface identifiers (thx Hans Dedecker)Steven Barth2015-01-191-2/+2
| | | | | | Signed-off-by: Steven Barth <steven@midlink.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44050 3c298f89-4303-0410-b956-a3cf2f4a3e73
* packages: uboot-sunxi: uEnv is used as a script rather than default envZoltan HERPAI2015-01-191-5/+6
| | | | | | | | Signed-off-by: Daniel Golle <daniel@makrotopia.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44048 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ralink: fix ethernet rx buffer size breakageFelix Fietkau2015-01-181-2/+2
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44047 3c298f89-4303-0410-b956-a3cf2f4a3e73
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-09 10:28:35 +0000