aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* ramips: Enable RTC support for PBR-M1Felix Fietkau2015-09-111-0/+1
| | | | | | | | | | | | | | The PBR-M1 and other upcoming MT7621 boards have RTC chips on them. The PBR-M1 also selects the kmod-rtc-pcf8563 by default. But the module itself will not be build because CONFIG_RTC_CLASS is currently not enabled for its kernel. Enabling this option should fix the problem of the missing rtc device on these boards. Signed-off-by: Sven Eckelmann <sven@open-mesh.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46857 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: fix ar724x clock calculationFelix Fietkau2015-09-111-0/+22
| | | | | | | | | | | | | | | | | According to the AR7242 datasheet section 2.8, AR724X CPUs use a 40MHz input clock as the REF_CLK instead of 5MHz. The correct CPU PLL calculation procedure is as follows: CPU_PLL = (DIV * REF_CLK) / REF_DIV / 2. This patch is compatible with the current calculation procedure with default DIV and REF_DIV values. Test on both AR7240, AR7241 and AR7242. Signed-off-by: Weijie Gao <hackpascal@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46856 3c298f89-4303-0410-b956-a3cf2f4a3e73
* brcm2708-gpu-fw: update to latest versionFelix Fietkau2015-09-111-3/+3
| | | | | | Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46855 3c298f89-4303-0410-b956-a3cf2f4a3e73
* brcm2708: add kmod-sound-soc-raspidac3Felix Fietkau2015-09-111-0/+23
| | | | | | | | This adds support for RaspiDAC Rev.3x Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46854 3c298f89-4303-0410-b956-a3cf2f4a3e73
* brcm2708: update 4.1 patchesFelix Fietkau2015-09-11169-296/+2877
| | | | | | | | | As usual, this patches were taken (and rebased) from https://github.com/raspberrypi/linux/commits/rpi-4.1.y Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46853 3c298f89-4303-0410-b956-a3cf2f4a3e73
* target: ar71xx: add support for COMFAST CF-E316N v2 boardFelix Fietkau2015-09-1112-10/+195
| | | | | | | | | | | | This adds full support (sans sysupgrading from vendor firmware) for the COMFAST CF-E316N v2 (aka CF-E316V2, CF-E316N-V2 and CF-E316Nv2.0, no FCC ID) by Shenzhen Four Seas Global Link Network Technology Co., Ltd (this company is actively refusing to provide GPL'd sources for the OpenWrt version they ship with the device, damn them). Signed-off-by: Paul Fertser <fercerpav@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46852 3c298f89-4303-0410-b956-a3cf2f4a3e73
* hostapd: work around unconditional libopenssl build dependencyFelix Fietkau2015-09-111-1/+1
| | | | | | | | | | | As the OpenWrt build system only resolves build dependencies per directory, all hostapd variants were causing libopenssl to be downloaded and built, not only wpad-mesh. Fix this by applying the same workaround as in ustream-ssl. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46851 3c298f89-4303-0410-b956-a3cf2f4a3e73
* opkg: work around unconditional libopenssl build dependencyFelix Fietkau2015-09-111-1/+1
| | | | | | | | | | | As the OpenWrt build system only resolves build dependencies per directory, all opkg variants were causing libopenssl to be downloaded and built, not only opkg-smime. Fix this by applying the same workaround as in ustream-ssl. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46850 3c298f89-4303-0410-b956-a3cf2f4a3e73
* base-files: change banner to Designated Driver releaseRafał Miłecki2015-09-111-6/+5
| | | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46846 3c298f89-4303-0410-b956-a3cf2f4a3e73
* comgt-ncm: Add possibility to choose PDP context typeSteven Barth2015-09-113-14/+50
| | | | | | | | | | | | | | | | | By setting the option pdptype to IP, IPV6 or IPV4V6 the user can choose the context type between IPv4, IPv6 and dual stack, respectively. The default setting is dual stack, except if option ipv6=0 is specified, in which case IPv4 context is the default. This allows for an out-of-the-box IPv6 support with modems utilizing NCM-like protocols. While we are at it, also add commands for Sierra DirectIP modems (currently untested), which will allow us to drop the separate comgt-directip package (once tested and verified working). Signed-off-by: Matti Laakso <malaakso@elisanet.fi> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46844 3c298f89-4303-0410-b956-a3cf2f4a3e73
* uqmi: Add proper IPv6 supportSteven Barth2015-09-112-58/+145
| | | | | | | | | | | | | | | | | | | | | Use the new --ip-family option to start both IPv4 and IPv6 sessions by default. Autoconnect can't be used when starting two sessions, so revert back to using the client IDs and packet data handles for handling the network connection. Some modem firmwares do not implement a RA server, therefore by default use outband IP configuration and static addressing. Some other firmwares report bogus IP configuration with the WDS get current settings command. In this case inband configuration with DHCP/RA can be optionally enabled by setting option dhcp to 1. Per 3GPP standard a /64 prefix is served to all clients, which is extended to LAN as specified in RFC 7278. v2: Restrict the IPv6 gateway route source address Signed-off-by: Matti Laakso <malaakso@elisanet.fi> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46843 3c298f89-4303-0410-b956-a3cf2f4a3e73
* firewall: Remove src_port from firewall.config to receive dhcpv6 repliesSteven Barth2015-09-111-1/+0
| | | | | | | | | | Seems like my second try was again whitespace broken. Sorry for the noise. Remove src_port from firewall.config to receive dhcpv6 replies. Fixes #20295. Signed-off-by: Anselm Eberhardt <a.eberhardt@cygnusnetworks.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46842 3c298f89-4303-0410-b956-a3cf2f4a3e73
* netifd: update to the latest version, fixes a WDS STA mode regression caused ↵Felix Fietkau2015-09-101-2/+2
| | | | | | | | by multicast-to-unicast handling (#20466) Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46841 3c298f89-4303-0410-b956-a3cf2f4a3e73
* imagebuilder: run build prereq checks before building image to set up host ↵Felix Fietkau2015-09-101-1/+16
| | | | | | | | commands properly Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46840 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ipq806x: fix uninitialized variable usage in cpufreq-kraitJonas Gorski2015-09-102-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In krait_cpufreq_probe, both freq and max_cpu_freq are never initialized, so the max_cpu_freq will have a random value at the end. Fix this by properly initializing max_cpu_freq to 0 and storing the clk frequency in freq as well, to make it similar to how it's calculated in krait_set_target. Fixes the following warnings: In file included from include/linux/clk.h:16:0, from drivers/cpufreq/cpufreq-krait.c:13: drivers/cpufreq/cpufreq-krait.c: In function 'krait_cpufreq_probe': include/linux/kernel.h:714:24: warning: 'freq' may be used uninitialized in this function [-Wmaybe-uninitialized] _max1 > _max2 ? _max1 : _max2; }) ^ drivers/cpufreq/cpufreq-krait.c:217:25: note: 'freq' was declared here unsigned long freq_Hz, freq, max_cpu_freq; ^ In file included from include/linux/clk.h:16:0, from drivers/cpufreq/cpufreq-krait.c:13: include/linux/kernel.h:714:24: warning: 'max_cpu_freq' may be used uninitialized in this function [-Wmaybe-uninitialized] _max1 > _max2 ? _max1 : _max2; }) ^ drivers/cpufreq/cpufreq-krait.c:217:31: note: 'max_cpu_freq' was declared here unsigned long freq_Hz, freq, max_cpu_freq; Signed-off-by: Jonas Gorski <jogo@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46839 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ipq806x: modules: fix typo in usb-dwc3-qcom dependenciesJonas Gorski2015-09-101-1/+1
| | | | | | | | | | The phy driver has its qcom-dwc3 order switched in contrast to the usb controller driver. Signed-off-by: Kaspar Schleiser <kaspar@schleiser.de> Signed-off-by: Jonas Gorski <jogo@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46838 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ipq806x: fix R7500 kernel generationJonas Gorski2015-09-101-1/+1
| | | | | | | | | Obviously the dummy rootfs must be after the kernel (uImage), not included in it. Signed-off-by: Jonas Gorski <jogo@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46837 3c298f89-4303-0410-b956-a3cf2f4a3e73
* busybox: lock: implement -n "Fail rather than wait"Felix Fietkau2015-09-091-2/+11
| | | | | | | | | | | | | | | | | | lock -n is similiar to flock -n. If the lock was already taken, fail with exit code = 1 and write error message to stderr. example: if ! lock -n /tmp/foo ; then echo lock exits. else echo lock was free. But is locked now. fi > lock was free. But is locked now. > lock exists. Signed-off-by: Alexander Couzens <lynxis@fe80.eu> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46836 3c298f89-4303-0410-b956-a3cf2f4a3e73
* generic: Fix per interface nf_call_iptables settingFelix Fietkau2015-09-093-537/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit r30917 ("kernel: bypass all netfilter hooks if the sysctls for that functionality have been disabled - eliminates the overhead of enabling CONFIG_BRIDGE_NETFILTER in the kernel config") introduced an optimization which should reduce/eliminate the overhead for traffic send over bridges on kernels compiled with CONFIG_BRIDGE_NETFILTER=y. But this optimization breaks the nf_call_iptables per bridge setting which is more fine grained than the global sysctl net.bridge.bridge-nf-call-iptables setting. A test reflecting a real world setup was created to identify if this really eliminates the overhead and if per-bridge nf_call_iptables could be used in some setups to increase the throughput. A Qualcomm Atheros QCA9558 based system with one ethernet and an ath9k wifi 3x3 in HT40 mode was used. Cables from the AP to the wifi station were used to reduce interference problems during the tests. The wlan interface was put in one bridge interface called br-wlan. This bridge usually contains some more wlan interfaces. The eth0 was put in a second bridge called br-lan. This usually contains some other privileged wlan or mesh interfaces. Routing was added between br-lan and br-wlan. Three kernels were tested: * (default) OpenWrt kernel for this device * (brfilter-global) OpenWrt kernel with CONFIG_BRIDGE_NETFILTER=y * (brfilter-local) OpenWrt kernel with CONFIG_BRIDGE_NETFILTER=y and without 644-bridge_optimize_netfilter_hooks.patch The changes to the the netfilter settings of the bridge were done via: * (brfilter-global) /sbin/sysctl -w net.bridge.bridge-nf-call-iptables=1 * (brfilter-lobal) echo 1 > /sys/class/net/br-lan/bridge/nf_call_iptables and/or echo 1 > /sys/class/net/br-wan/bridge/nf_call_iptables A station connected to the wlan0 (AP) interface was used to send traffic to a PC connected via ethernet. iperf with 3 concurrent transmissions was used to generate the traffic. | kernel | br-nf-* global | nf-call* iface | download | upload | |-----------------|----------------|----------------|----------|----------| | default | 0 | - | 209 | 268 | | brfilter-global | 0 | - | 185 | 243 | | brfilter-local | 0 | - | 187 | 243 | | brfilter-local | 0 | br-lan | 157 | 226 | | brfilter-local | 0 | br-lan br-wlan | 139 | 161 | | brfilter-global | 1 | - | 136 | 162 | Download/upload results in Mibit/s It can be seen that the patch doesn't eliminate the overhead. It can also be seen that the throughput of brfilter-global and brfilter-local with disabled filtering is the roughly the same. Also the throughput for brfilter-global and brfilter-local for enabled filtering on all bridges is roughly the same. But also the brfilter-local throughput is higher when only br-lan requires the filtering. This setting would not be possible with 644-bridge_optimize_netfilter_hooks.patch applied and thus can only be compared with brfilter-global and filtering enabled for all interfaces. Signed-off-by: Sven Eckelmann <sven@open-mesh.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46835 3c298f89-4303-0410-b956-a3cf2f4a3e73
* linux: make IPv6 builtin if selected (saves >30KB)Steven Barth2015-09-093-13/+12
| | | | | | Signed-off-by: Steven Barth <steven@midlink.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46834 3c298f89-4303-0410-b956-a3cf2f4a3e73
* busybox: fix ip applet and netlink behaviorSteven Barth2015-09-094-2/+86
| | | | | | Signed-off-by: Steven Barth <steven@midlink.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46833 3c298f89-4303-0410-b956-a3cf2f4a3e73
* package: replace ifconfig-usage with ipSteven Barth2015-09-087-15/+15
| | | | | | Signed-off-by: Steven Barth <steven@midlink.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46832 3c298f89-4303-0410-b956-a3cf2f4a3e73
* iproute2: improve ip-full coexistence, remove rt_tableSteven Barth2015-09-081-9/+4
| | | | | | Signed-off-by: Steven Barth <steven@midlink.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46831 3c298f89-4303-0410-b956-a3cf2f4a3e73
* base-files: add /etc/iproute2/rt_tables, replace ifconfig-usageSteven Barth2015-09-083-3/+17
| | | | | | Signed-off-by: Steven Barth <steven@midlink.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46830 3c298f89-4303-0410-b956-a3cf2f4a3e73
* busybox: improve applets & deprecate ifconfig, routeSteven Barth2015-09-082-10/+10
| | | | | | | | | | added: ip addr, ip route, ip link, traceroute6 removed: hostid, devmem, vconfig, arping deprecated (to be removed): ifconfig, route Signed-off-by: Steven Barth <steven@midlink.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46829 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kernel: describe bridge patch "multicast to unicast"Rafał Miłecki2015-09-083-0/+15
| | | | | | It was initially added in r41367 by nbd. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46828 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kernel: describe bridge patch "optimize netfilter hooks"Rafał Miłecki2015-09-083-0/+21
| | | | | | It was initially added in r30917 by nbd. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46827 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kernel: describe bridge patch "remove IPv6 depependency of bridge in 2.6.38+"Rafał Miłecki2015-09-083-0/+39
| | | | | | It was initially added in r27237 by jow as patch from Jonas. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46826 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kernel: describe bridge patch "port isolate"Rafał Miłecki2015-09-083-0/+15
| | | | | | It was initially added in r25762 by nbd. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46825 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kernel: describe bridge patch "always accept EAP"Rafał Miłecki2015-09-083-0/+18
| | | | | | It was initially added in r26015 by nbd. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46824 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kernel: describe bridge patch "no EAP forward"Rafał Miłecki2015-09-083-0/+24
| | | | | | It was initially added in r25095 by nbd. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46823 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kernel: restore 640-bridge_no_eap_forward.patch to its original formFelix Fietkau2015-09-083-3/+3
| | | | | | | | | | It was corrupted in r38528. The most obvious symptom is repeated messages like this: Tue Sep 8 08:25:18 2015 kern.warn kernel: [77141.972226] br-lan: received packet on wlan0 with own address as source address Signed-off-by: Dmitry Ivanov <dima@ubnt.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46821 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kernel: remove packaging of kmod-crypto-core and kmod-crypto-arc4Felix Fietkau2015-09-0811-48/+14
| | | | | | | | | Everything except for blkcipher was already built-in, so make blkcipher built-in as well. Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46820 3c298f89-4303-0410-b956-a3cf2f4a3e73
* map: be less restrictive when matching lw4over6 prefixesSteven Barth2015-09-082-6/+11
| | | | | | Signed-off-by: Steven Barth <steven@midlink.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46819 3c298f89-4303-0410-b956-a3cf2f4a3e73
* iw: reduce size even more (~12k after gzip)Felix Fietkau2015-09-081-2/+133
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46818 3c298f89-4303-0410-b956-a3cf2f4a3e73
* musl: add a hack to remove unused crypt() algorithms, saves ~14k after lzmaFelix Fietkau2015-09-081-0/+110
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46816 3c298f89-4303-0410-b956-a3cf2f4a3e73
* dropbear: remove generation and configuration of DSS keysSteven Barth2015-09-082-9/+4
| | | | | | Signed-off-by: Steven Barth <steven@midlink.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46815 3c298f89-4303-0410-b956-a3cf2f4a3e73
* dropbear: disable 3des, cbc mode, dss support, saves about 5k gzippedFelix Fietkau2015-09-081-1/+20
| | | | | | | | | While technically required by the RFC, they are usually completely unused (DSA), or have security issues (3DES, CBC) Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46814 3c298f89-4303-0410-b956-a3cf2f4a3e73
* argp-standalone: fix build error with gcc 5.2 (#20460)Felix Fietkau2015-09-081-0/+11
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46813 3c298f89-4303-0410-b956-a3cf2f4a3e73
* brcm47xx: apply serial flash size trick to Netgear WNR1000 V3Rafał Miłecki2015-09-082-4/+6
| | | | | | | | It also uses different block size just like WGR614 V10. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46810 3c298f89-4303-0410-b956-a3cf2f4a3e73
* Disable telnet in favor of passwordless SSHSteven Barth2015-09-079-48/+49
| | | | | | | | | | This enables passworldless login for root via SSH whenever no root password is set (e.g. after reset, flashing without keeping config or in failsafe) and removes telnet support alltogether. Signed-off-by: Steven Barth <steven@midlink.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46809 3c298f89-4303-0410-b956-a3cf2f4a3e73
* uhttpd: update to the latest version, fixes deferred cgi script processing ↵Felix Fietkau2015-09-071-2/+2
| | | | | | | | (#20458) Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46807 3c298f89-4303-0410-b956-a3cf2f4a3e73
* brcm47xx: fix reading WGT634U CFE variables with 4.1Rafał Miłecki2015-09-071-6/+6
| | | | | | | | This ports fix from r46584 to the 4.1. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46806 3c298f89-4303-0410-b956-a3cf2f4a3e73
* brcm47xx: add Netgear WNR1000 V3 support in the Linux arch codeRafał Miłecki2015-09-072-4/+80
| | | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46805 3c298f89-4303-0410-b956-a3cf2f4a3e73
* map: ignore insignificant PSID bitsSteven Barth2015-09-072-2/+4
| | | | | | Signed-off-by: Steven Barth <steven@midlink.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46804 3c298f89-4303-0410-b956-a3cf2f4a3e73
* odhcpd: fix parsing of host entries without duidSteven Barth2015-09-071-2/+2
| | | | | | Signed-off-by: Steven Barth <steven@midlink.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46803 3c298f89-4303-0410-b956-a3cf2f4a3e73
* odhcpd: various bugfixesSteven Barth2015-09-071-2/+2
| | | | | | | | | | * ra: don't announce as default router if we aren't (regression) * ra: reduce maximum announced dns lifetimes due to buggy clients * dhcpv6: fix mac-based lease-matching Signed-off-by: Steven Barth <steven@midlink.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46802 3c298f89-4303-0410-b956-a3cf2f4a3e73
* nls.mk: add -rpath-link when needed for NLS supportSteven Barth2015-09-071-2/+2
| | | | | | | | | | When a package links to a shared library that depends on libiconv or libintl shared libraries, specifying directory pathes to them via -L switches is not enough, see "man 1 ld" -rpath-link description. Signed-off-by: Paul Fertser <fercerpav@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46801 3c298f89-4303-0410-b956-a3cf2f4a3e73
* gcc: add missing powerpc patch for 5.2.0Felix Fietkau2015-09-071-0/+65
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46800 3c298f89-4303-0410-b956-a3cf2f4a3e73
* gcc: remove 4.6.3 leftoversFelix Fietkau2015-09-062-4/+0
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46799 3c298f89-4303-0410-b956-a3cf2f4a3e73
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-09 05:34:11 +0000