aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux')
-rw-r--r--target/linux/kirkwood/config-3.3179
-rw-r--r--target/linux/kirkwood/patches-3.3/001-openwrt_partition_map.patch11
-rw-r--r--target/linux/kirkwood/patches-3.3/002-mvsdio_delay.patch32
-rw-r--r--target/linux/kirkwood/patches-3.3/200-iconnect.patch218
4 files changed, 440 insertions, 0 deletions
diff --git a/target/linux/kirkwood/config-3.3 b/target/linux/kirkwood/config-3.3
new file mode 100644
index 0000000000..3d29548d62
--- /dev/null
+++ b/target/linux/kirkwood/config-3.3
@@ -0,0 +1,179 @@
+CONFIG_ALIGNMENT_TRAP=y
+CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
+CONFIG_ARCH_KIRKWOOD=y
+CONFIG_ARCH_NR_GPIO=0
+# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_ARCH_USES_GETTIMEOFFSET is not set
+CONFIG_ARM=y
+# CONFIG_ARM_CPU_SUSPEND is not set
+CONFIG_ARM_L1_CACHE_SHIFT=5
+CONFIG_ARM_NR_BANKS=8
+CONFIG_ARM_PATCH_PHYS_VIRT=y
+# CONFIG_ARM_THUMB is not set
+# CONFIG_ARPD is not set
+CONFIG_BCMA_POSSIBLE=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_CACHE_FEROCEON_L2=y
+# CONFIG_CACHE_FEROCEON_L2_WRITETHROUGH is not set
+# CONFIG_CACHE_L2X0 is not set
+CONFIG_CLKSRC_MMIO=y
+CONFIG_CMDLINE="rootdelay=1 root=/dev/mmcblk0p1 noinitrd console=ttyS0,115200"
+CONFIG_CMDLINE_FROM_BOOTLOADER=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5T=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_FEROCEON=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+CONFIG_CPU_FEROCEON=y
+# CONFIG_CPU_FEROCEON_OLD_ID is not set
+# CONFIG_CPU_ICACHE_DISABLE is not set
+CONFIG_CPU_IDLE=y
+CONFIG_CPU_IDLE_GOV_LADDER=y
+CONFIG_CPU_PABRT_LEGACY=y
+CONFIG_CPU_PM=y
+CONFIG_CPU_TLB_FEROCEON=y
+CONFIG_CPU_USE_DOMAINS=y
+CONFIG_CRC16=y
+# CONFIG_DEBUG_USER is not set
+CONFIG_DECOMPRESS_LZMA=y
+# CONFIG_DLCI is not set
+CONFIG_DNOTIFY=y
+CONFIG_EXT4_FS=y
+CONFIG_FRAME_POINTER=y
+CONFIG_FS_MBCACHE=y
+CONFIG_GENERIC_ATOMIC64=y
+CONFIG_GENERIC_BUG=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+# CONFIG_GENERIC_CPU_DEVICES is not set
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_IRQ_CHIP=y
+CONFIG_GENERIC_IRQ_SHOW=y
+CONFIG_GENERIC_PCI_IOMAP=y
+CONFIG_GPIOLIB=y
+# CONFIG_HAMRADIO is not set
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_HAS_DMA=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAVE_AOUT=y
+CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_HAVE_ARCH_PFN_VALID=y
+CONFIG_HAVE_C_RECORDMCOUNT=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_HAVE_GENERIC_HARDIRQS=y
+CONFIG_HAVE_IDE=y
+CONFIG_HAVE_IRQ_WORK=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_HAVE_KERNEL_LZO=y
+CONFIG_HAVE_KERNEL_XZ=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_HAVE_MEMBLOCK=y
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_PERF_EVENTS=y
+CONFIG_HAVE_PROC_CPU=y
+CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
+CONFIG_HAVE_SCHED_CLOCK=y
+CONFIG_HAVE_SPARSE_IRQ=y
+CONFIG_HW_RANDOM=y
+CONFIG_INET_LRO=y
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_PIMSM_V1=y
+CONFIG_IP_PIMSM_V2=y
+CONFIG_JBD2=y
+CONFIG_KTIME_SCALAR=y
+CONFIG_LEDS_GPIO=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_MACH_D2NET_V2 is not set
+# CONFIG_MACH_DB88F6281_BP is not set
+CONFIG_MACH_DOCKSTAR=y
+# CONFIG_MACH_ESATA_SHEEVAPLUG is not set
+# CONFIG_MACH_GURUPLUG is not set
+CONFIG_MACH_ICONNECT=y
+# CONFIG_MACH_INETSPACE_V2 is not set
+# CONFIG_MACH_MV88F6281GTW_GE is not set
+# CONFIG_MACH_NET2BIG_V2 is not set
+# CONFIG_MACH_NET5BIG_V2 is not set
+# CONFIG_MACH_NETSPACE_MAX_V2 is not set
+# CONFIG_MACH_NETSPACE_V2 is not set
+CONFIG_MACH_OPENRD=y
+CONFIG_MACH_OPENRD_BASE=y
+CONFIG_MACH_OPENRD_CLIENT=y
+# CONFIG_MACH_OPENRD_ULTIMATE is not set
+# CONFIG_MACH_RD88F6192_NAS is not set
+# CONFIG_MACH_RD88F6281 is not set
+CONFIG_MACH_SHEEVAPLUG=y
+# CONFIG_MACH_T5325 is not set
+# CONFIG_MACH_TS219 is not set
+# CONFIG_MACH_TS41X is not set
+CONFIG_MDIO_BOARDINFO=y
+# CONFIG_MLX4_CORE is not set
+CONFIG_MMC=y
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_MVSDIO=y
+# CONFIG_MMC_TIFM_SD is not set
+# CONFIG_MTD_CFI is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_ECC=y
+CONFIG_MTD_NAND_ORION=y
+# CONFIG_MTD_ROOTFS_ROOT_DEV is not set
+# CONFIG_MTD_ROOTFS_SPLIT is not set
+# CONFIG_MTD_SM_COMMON is not set
+CONFIG_MV643XX_ETH=y
+CONFIG_NEED_DMA_MAP_STATE=y
+CONFIG_NEED_PER_CPU_KM=y
+CONFIG_NET_DSA=y
+# CONFIG_NET_DSA_MV88E6060 is not set
+CONFIG_NET_DSA_MV88E6131=y
+CONFIG_NET_DSA_MV88E6XXX=y
+CONFIG_NET_DSA_MV88E6XXX_NEED_PPU=y
+CONFIG_NET_DSA_TAG_DSA=y
+# CONFIG_NET_DSA_TAG_TRAILER is not set
+CONFIG_NLS=y
+CONFIG_OUTER_CACHE=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PCI=y
+CONFIG_PERF_USE_VMALLOC=y
+CONFIG_PHYLIB=y
+CONFIG_PLAT_ORION=y
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_QUOTACTL is not set
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_MV=y
+CONFIG_SCSI=y
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SDIO_UART is not set
+CONFIG_SPLIT_PTLOCK_CPUS=999999
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_UID16=y
+CONFIG_USB=y
+CONFIG_USB_ARCH_HAS_XHCI=y
+CONFIG_USB_COMMON=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_STORAGE=y
+CONFIG_USB_SUPPORT=y
+# CONFIG_USB_UHCI_HCD is not set
+CONFIG_VECTORS_BASE=0xffff0000
+# CONFIG_VFP is not set
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_WAN=y
+CONFIG_XZ_DEC=y
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZONE_DMA_FLAG=0
diff --git a/target/linux/kirkwood/patches-3.3/001-openwrt_partition_map.patch b/target/linux/kirkwood/patches-3.3/001-openwrt_partition_map.patch
new file mode 100644
index 0000000000..0f94adc343
--- /dev/null
+++ b/target/linux/kirkwood/patches-3.3/001-openwrt_partition_map.patch
@@ -0,0 +1,11 @@
+--- a/arch/arm/mach-kirkwood/sheevaplug-setup.c
++++ b/arch/arm/mach-kirkwood/sheevaplug-setup.c
+@@ -33,7 +33,7 @@ static struct mtd_partition sheevaplug_n
+ .offset = MTDPART_OFS_NXTBLK,
+ .size = SZ_4M
+ }, {
+- .name = "root",
++ .name = "rootfs",
+ .offset = MTDPART_OFS_NXTBLK,
+ .size = MTDPART_SIZ_FULL
+ },
diff --git a/target/linux/kirkwood/patches-3.3/002-mvsdio_delay.patch b/target/linux/kirkwood/patches-3.3/002-mvsdio_delay.patch
new file mode 100644
index 0000000000..46e2a5646c
--- /dev/null
+++ b/target/linux/kirkwood/patches-3.3/002-mvsdio_delay.patch
@@ -0,0 +1,32 @@
+--- a/drivers/mmc/core/sd.c
++++ b/drivers/mmc/core/sd.c
+@@ -389,6 +389,15 @@ int mmc_sd_switch_hs(struct mmc_card *ca
+ return -ENOMEM;
+ }
+
++ /*
++ * Some SDHC cards, notably those with a Sandisk SD controller
++ * (also found in Kingston products) need a bit of slack
++ * before successfully handling the SWITCH command. So far,
++ * cards identifying themselves as "SD04G" and "SD08G" are
++ * affected
++ */
++ udelay(1000);
++
+ err = mmc_sd_switch(card, 1, 0, 1, status);
+ if (err)
+ goto out;
+--- a/drivers/mmc/core/core.c
++++ b/drivers/mmc/core/core.c
+@@ -529,9 +529,9 @@ void mmc_set_data_timeout(struct mmc_dat
+ * The limit is really 250 ms, but that is
+ * insufficient for some crappy cards.
+ */
+- limit_us = 300000;
++ limit_us = 500000;
+ else
+- limit_us = 100000;
++ limit_us = 200000;
+
+ /*
+ * SDHC cards always use these fixed values.
diff --git a/target/linux/kirkwood/patches-3.3/200-iconnect.patch b/target/linux/kirkwood/patches-3.3/200-iconnect.patch
new file mode 100644
index 0000000000..5a46ee780f
--- /dev/null
+++ b/target/linux/kirkwood/patches-3.3/200-iconnect.patch
@@ -0,0 +1,218 @@
+--- a/arch/arm/mach-kirkwood/Makefile
++++ b/arch/arm/mach-kirkwood/Makefile
+@@ -8,6 +8,7 @@ obj-$(CONFIG_MACH_SHEEVAPLUG) += sheeva
+ obj-$(CONFIG_MACH_ESATA_SHEEVAPLUG) += sheevaplug-setup.o
+ obj-$(CONFIG_MACH_GURUPLUG) += guruplug-setup.o
+ obj-$(CONFIG_MACH_DOCKSTAR) += dockstar-setup.o
++obj-$(CONFIG_MACH_ICONNECT) += iconnect-setup.o
+ obj-$(CONFIG_MACH_TS219) += ts219-setup.o tsx1x-common.o
+ obj-$(CONFIG_MACH_TS41X) += ts41x-setup.o tsx1x-common.o
+ obj-$(CONFIG_MACH_OPENRD) += openrd-setup.o
+--- a/arch/arm/mach-kirkwood/Kconfig
++++ b/arch/arm/mach-kirkwood/Kconfig
+@@ -130,6 +130,12 @@ config MACH_T5325
+ Say 'Y' here if you want your kernel to support the
+ HP t5325 Thin Client.
+
++config MACH_ICONNECT
++ bool "Iomega iConnect Wireless"
++ help
++ Say 'Y' here if you want your kernel to support the
++ Iomega iConnect Wireless.
++
+ endmenu
+
+ endif
+--- /dev/null
++++ b/arch/arm/mach-kirkwood/iconnect-setup.c
+@@ -0,0 +1,190 @@
++/*
++ * arch/arm/mach-kirkwood/iconnect-setup.c
++ *
++ * Iomega iConnect Wireless
++ *
++ * This file is licensed under the terms of the GNU General Public
++ * License version 2. This program is licensed "as is" without any
++ * warranty of any kind, whether express or implied.
++ */
++
++#include <linux/kernel.h>
++#include <linux/init.h>
++#include <linux/platform_device.h>
++#include <linux/irq.h>
++#include <linux/mtd/partitions.h>
++#include <linux/mv643xx_eth.h>
++#include <linux/ethtool.h>
++#include <linux/gpio.h>
++#include <linux/gpio_keys.h>
++#include <linux/input.h>
++#include <linux/leds.h>
++#include <asm/mach-types.h>
++#include <asm/mach/arch.h>
++#include <mach/kirkwood.h>
++#include "common.h"
++#include "mpp.h"
++
++static struct mtd_partition iconnect_nand_parts[] = {
++ {
++ .name = "u-boot",
++ .offset = 0,
++ .size = SZ_1M
++ }, {
++ .name = "uImage",
++ .offset = MTDPART_OFS_NXTBLK,
++ .size = SZ_1M + SZ_2M
++ }, {
++ .name = "rootfs",
++ .offset = MTDPART_OFS_NXTBLK,
++ .size = SZ_32M,
++ }, {
++ .name = "data",
++ .offset = MTDPART_OFS_NXTBLK,
++ .size = MTDPART_SIZ_FULL
++ },
++};
++
++static struct mv643xx_eth_platform_data iconnect_ge00_data = {
++ .phy_addr = MV643XX_ETH_PHY_ADDR(11),
++};
++
++static struct gpio_led iconnect_led_pins[] = {
++ {
++ .name = "iconnect:blue:power",
++ .default_trigger = "default-on",
++ .gpio = 42,
++ },
++ {
++ .name = "iconnect:red:power",
++ .gpio = 43,
++ },
++ {
++ .name = "iconnect:blue:usb1",
++ .gpio = 44,
++ },
++ {
++ .name = "iconnect:blue:usb2",
++ .gpio = 45,
++ },
++ {
++ .name = "iconnect:blue:usb3",
++ .gpio = 46,
++ },
++ {
++ .name = "iconnect:blue:usb4",
++ .gpio = 47,
++ },
++ {
++ .name = "iconnect:blue:otb",
++ .gpio = 48,
++ },
++};
++
++static struct gpio_led_platform_data iconnect_led_data = {
++ .leds = iconnect_led_pins,
++ .num_leds = ARRAY_SIZE(iconnect_led_pins),
++};
++
++static struct platform_device iconnect_leds = {
++ .name = "leds-gpio",
++ .id = -1,
++ .dev = {
++ .platform_data = &iconnect_led_data,
++ }
++};
++
++#define ICONNECT_GPIO_KEY_RESET 12
++#define ICONNECT_GPIO_KEY_OTB 35
++
++#define ICONNECT_SW_RESET 0x00
++#define ICONNECT_SW_OTB 0x01
++
++static struct gpio_keys_button iconnect_buttons[] = {
++ {
++ .type = EV_SW,
++ .code = ICONNECT_SW_RESET,
++ .gpio = ICONNECT_GPIO_KEY_RESET,
++ .desc = "Reset Button",
++ .active_low = 1,
++ .debounce_interval = 100,
++ },
++ {
++ .type = EV_SW,
++ .code = ICONNECT_SW_OTB,
++ .gpio = ICONNECT_GPIO_KEY_OTB,
++ .desc = "OTB Button",
++ .active_low = 1,
++ .debounce_interval = 100,
++ },
++};
++
++static struct gpio_keys_platform_data iconnect_button_data = {
++ .buttons = iconnect_buttons,
++ .nbuttons = ARRAY_SIZE(iconnect_buttons),
++};
++
++static struct platform_device iconnect_button_device = {
++ .name = "gpio-keys",
++ .id = -1,
++ .num_resources = 0,
++ .dev = {
++ .platform_data = &iconnect_button_data,
++ },
++};
++
++static unsigned int iconnect_mpp_config[] __initdata = {
++ MPP12_GPIO, /*Input for reset button*/
++ MPP35_GPIO, /*Input for OTB button*/
++ MPP42_GPIO,
++ MPP43_GPIO,
++ MPP44_GPIO,
++ MPP45_GPIO,
++ MPP46_GPIO,
++ MPP47_GPIO,
++ MPP48_GPIO,
++ 0
++};
++
++static void __init iconnect_init(void)
++{
++ u32 dev, rev;
++
++ /*
++ * Basic setup. Needs to be called early.
++ */
++ kirkwood_init();
++ kirkwood_mpp_conf(iconnect_mpp_config);
++
++ kirkwood_nand_init(ARRAY_AND_SIZE(iconnect_nand_parts), 25);
++ kirkwood_ehci_init();
++
++ kirkwood_ge00_init(&iconnect_ge00_data);
++ kirkwood_pcie_id(&dev, &rev);
++
++ kirkwood_uart0_init();
++ kirkwood_i2c_init();
++
++ platform_device_register(&iconnect_leds);
++ platform_device_register(&iconnect_button_device);
++}
++
++static int __init iconnect_pci_init(void)
++{
++ if (machine_is_iconnect())
++ kirkwood_pcie_init(KW_PCIE0);
++
++ return 0;
++}
++subsys_initcall(iconnect_pci_init);
++
++
++MACHINE_START(ICONNECT, "Iomega iConnect Wireless")
++ .atag_offset = 0x100,
++ .init_machine = iconnect_init,
++ .map_io = kirkwood_map_io,
++ .init_early = kirkwood_init_early,
++ .init_irq = kirkwood_init_irq,
++ .timer = &kirkwood_timer,
++ .restart = kirkwood_restart,
++MACHINE_END