aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux')
-rw-r--r--target/linux/adm5120/Makefile3
-rw-r--r--target/linux/adm5120/files/arch/mips/adm5120/Kconfig20
-rw-r--r--target/linux/adm5120/files/arch/mips/adm5120/Makefile11
-rw-r--r--target/linux/adm5120/files/arch/mips/adm5120/adm5120_info.c80
-rw-r--r--target/linux/adm5120/files/arch/mips/adm5120/board.c118
-rw-r--r--target/linux/adm5120/files/arch/mips/adm5120/boards/Makefile11
-rw-r--r--target/linux/adm5120/files/arch/mips/adm5120/boards/cellvision.c208
-rw-r--r--target/linux/adm5120/files/arch/mips/adm5120/boards/compex.c240
-rw-r--r--target/linux/adm5120/files/arch/mips/adm5120/boards/edimax.c90
-rw-r--r--target/linux/adm5120/files/arch/mips/adm5120/boards/generic.c35
-rw-r--r--target/linux/adm5120/files/arch/mips/adm5120/boards/infineon.c160
-rw-r--r--target/linux/adm5120/files/arch/mips/adm5120/boards/mikrotik.c378
-rw-r--r--target/linux/adm5120/files/arch/mips/adm5120/boards/zyxel.c115
-rw-r--r--target/linux/adm5120/files/arch/mips/adm5120/clock.c65
-rw-r--r--target/linux/adm5120/files/arch/mips/adm5120/gpio.c375
-rw-r--r--target/linux/adm5120/files/arch/mips/adm5120/irq.c181
-rw-r--r--target/linux/adm5120/files/arch/mips/adm5120/memory.c152
-rw-r--r--target/linux/adm5120/files/arch/mips/adm5120/platform.c252
-rw-r--r--target/linux/adm5120/files/arch/mips/adm5120/prom.c276
-rw-r--r--target/linux/adm5120/files/arch/mips/adm5120/prom/Makefile9
-rw-r--r--target/linux/adm5120/files/arch/mips/adm5120/prom/bootbase.c114
-rw-r--r--target/linux/adm5120/files/arch/mips/adm5120/prom/cfe.c72
-rw-r--r--target/linux/adm5120/files/arch/mips/adm5120/prom/generic.c50
-rw-r--r--target/linux/adm5120/files/arch/mips/adm5120/prom/myloader.c65
-rw-r--r--target/linux/adm5120/files/arch/mips/adm5120/prom/prom_read.h53
-rw-r--r--target/linux/adm5120/files/arch/mips/adm5120/prom/routerboot.c124
-rw-r--r--target/linux/adm5120/files/arch/mips/adm5120/reset.c56
-rw-r--r--target/linux/adm5120/files/arch/mips/adm5120/setup.c67
-rw-r--r--target/linux/adm5120/files/arch/mips/adm5120/time.c35
-rw-r--r--target/linux/adm5120/files/arch/mips/pci/pci-adm5120.c284
-rw-r--r--target/linux/adm5120/files/drivers/ata/pata_rb153_cf.c316
-rw-r--r--target/linux/adm5120/files/drivers/leds/leds-adm5120.c431
-rw-r--r--target/linux/adm5120/files/drivers/leds/ledtrig-adm5120-switch.c149
-rw-r--r--target/linux/adm5120/files/drivers/mtd/maps/adm5120-flash.c571
-rw-r--r--target/linux/adm5120/files/drivers/mtd/myloader.c167
-rw-r--r--target/linux/adm5120/files/drivers/mtd/trxsplit.c220
-rw-r--r--target/linux/adm5120/files/drivers/net/adm5120sw.c1205
-rw-r--r--target/linux/adm5120/files/drivers/net/adm5120sw.h23
-rw-r--r--target/linux/adm5120/files/drivers/usb/host/adm5120-dbg.c842
-rw-r--r--target/linux/adm5120/files/drivers/usb/host/adm5120-drv.c236
-rw-r--r--target/linux/adm5120/files/drivers/usb/host/adm5120-hcd.c845
-rw-r--r--target/linux/adm5120/files/drivers/usb/host/adm5120-hub.c441
-rw-r--r--target/linux/adm5120/files/drivers/usb/host/adm5120-mem.c202
-rw-r--r--target/linux/adm5120/files/drivers/usb/host/adm5120-pm.c445
-rw-r--r--target/linux/adm5120/files/drivers/usb/host/adm5120-q.c955
-rw-r--r--target/linux/adm5120/files/drivers/usb/host/adm5120.h762
-rw-r--r--target/linux/adm5120/files/drivers/watchdog/adm5120_wdt.c206
-rw-r--r--target/linux/adm5120/files/include/asm-mips/mach-adm5120/adm5120_board.h59
-rw-r--r--target/linux/adm5120/files/include/asm-mips/mach-adm5120/adm5120_defs.h56
-rw-r--r--target/linux/adm5120/files/include/asm-mips/mach-adm5120/adm5120_info.h85
-rw-r--r--target/linux/adm5120/files/include/asm-mips/mach-adm5120/adm5120_intc.h66
-rw-r--r--target/linux/adm5120/files/include/asm-mips/mach-adm5120/adm5120_irq.h44
-rw-r--r--target/linux/adm5120/files/include/asm-mips/mach-adm5120/adm5120_mpmc.h95
-rw-r--r--target/linux/adm5120/files/include/asm-mips/mach-adm5120/adm5120_nand.h91
-rw-r--r--target/linux/adm5120/files/include/asm-mips/mach-adm5120/adm5120_platform.h95
-rw-r--r--target/linux/adm5120/files/include/asm-mips/mach-adm5120/adm5120_switch.h303
-rw-r--r--target/linux/adm5120/files/include/asm-mips/mach-adm5120/adm5120_uart.h65
-rw-r--r--target/linux/adm5120/files/include/asm-mips/mach-adm5120/asm/sizes.h56
-rw-r--r--target/linux/adm5120/files/include/asm-mips/mach-adm5120/cpu-feature-overrides.h79
-rw-r--r--target/linux/adm5120/files/include/asm-mips/mach-adm5120/gpio.h115
-rw-r--r--target/linux/adm5120/files/include/asm-mips/mach-adm5120/prom/cfe.h21
-rw-r--r--target/linux/adm5120/files/include/asm-mips/mach-adm5120/prom/generic.h21
-rw-r--r--target/linux/adm5120/files/include/asm-mips/mach-adm5120/prom/myloader.h181
-rw-r--r--target/linux/adm5120/files/include/asm-mips/mach-adm5120/prom/routerboot.h128
-rw-r--r--target/linux/adm5120/files/include/asm-mips/mach-adm5120/prom/zynos.h89
-rw-r--r--target/linux/adm5120/files/include/asm-mips/mach-adm5120/war.h25
-rw-r--r--target/linux/adm5120/patches/001-adm5120.patch112
-rw-r--r--target/linux/adm5120/patches/002-adm5120_flash.patch22
-rw-r--r--target/linux/adm5120/patches/003-adm5120_switch.patch23
-rw-r--r--target/linux/adm5120/patches/005-adm5120_usb.patch29
-rw-r--r--target/linux/adm5120/patches/006-adm5120_leds.patch34
-rw-r--r--target/linux/adm5120/patches/007-adm5120_pci.patch19
-rw-r--r--target/linux/adm5120/patches/009-adm5120_leds_switch_trigger.patch22
-rw-r--r--target/linux/adm5120/patches/100-mtd_myloder_partition_parser.patch35
-rw-r--r--target/linux/adm5120/patches/101-cfi_fixup_macronix_bootloc.patch91
-rw-r--r--target/linux/adm5120/patches/102-jedec_pmc_39lvxxx_chips.patch68
-rw-r--r--target/linux/adm5120/patches/103-mtd_trxsplit.patch24
-rw-r--r--target/linux/adm5120/patches/120-rb153_cf_driver.patch26
-rw-r--r--target/linux/adm5120/patches/140-cmdline_hack.patch15
-rw-r--r--target/linux/adm5120/patches/200-amba_pl010_hacks.patch378
-rw-r--r--target/linux/adm5120/patches/201-amba_bus_hacks.patch13
-rw-r--r--target/linux/adm5120/patches/202-pci_disable_common_quirks.patch46
-rw-r--r--target/linux/adm5120/patches/203-gpio_leds_brightness.patch27
-rw-r--r--target/linux/adm5120/patches/310-adm5120_wdt.patch31
84 files changed, 1 insertions, 14403 deletions
diff --git a/target/linux/adm5120/Makefile b/target/linux/adm5120/Makefile
index 2947308f8e..5709a58cdb 100644
--- a/target/linux/adm5120/Makefile
+++ b/target/linux/adm5120/Makefile
@@ -1,5 +1,5 @@
#
-# Copyright (C) 2007,2008 OpenWrt.org
+# Copyright (C) 2007-2008 OpenWrt.org
#
# This is free software, licensed under the GNU General Public License v2.
# See /LICENSE for more information.
@@ -9,7 +9,6 @@ include $(TOPDIR)/rules.mk
BOARD:=adm5120
BOARDNAME:=Infineon/ADMtek ADM5120
-#LINUX_VERSION:=2.6.25.16
LINUX_VERSION:=2.6.26.3
SUBTARGETS:=router_le router_be
INITRAMFS_EXTRA_FILES:=
diff --git a/target/linux/adm5120/files/arch/mips/adm5120/Kconfig b/target/linux/adm5120/files/arch/mips/adm5120/Kconfig
deleted file mode 100644
index 7738d8175b..0000000000
--- a/target/linux/adm5120/files/arch/mips/adm5120/Kconfig
+++ /dev/null
@@ -1,20 +0,0 @@
-if MIPS_ADM5120
-
-menu "ADM5120 Implementation Options"
-
-config ADM5120_CPU_OVERRIDES
- bool "Enable CPU feature overrides"
- default y
-
-config PCI_ADM5120
- bool "Enable PCI support"
- select PCI
- default y
-
-endmenu
-
-config ARM_AMBA
- bool
- default y
-
-endif
diff --git a/target/linux/adm5120/files/arch/mips/adm5120/Makefile b/target/linux/adm5120/files/arch/mips/adm5120/Makefile
deleted file mode 100644
index 2a5f391f25..0000000000
--- a/target/linux/adm5120/files/arch/mips/adm5120/Makefile
+++ /dev/null
@@ -1,11 +0,0 @@
-#
-# Makefile for the ADMtek ADM5120 SoC specific parts of the kernel
-#
-
-obj-y := setup.o prom.o irq.o memory.o adm5120_info.o
-obj-y += board.o
-obj-y += clock.o
-obj-y += gpio.o
-obj-y += platform.o
-obj-y += reset.o
-obj-y += time.o
diff --git a/target/linux/adm5120/files/arch/mips/adm5120/adm5120_info.c b/target/linux/adm5120/files/arch/mips/adm5120/adm5120_info.c
deleted file mode 100644
index 99ec2fc375..0000000000
--- a/target/linux/adm5120/files/arch/mips/adm5120/adm5120_info.c
+++ /dev/null
@@ -1,80 +0,0 @@
-/*
- * $Id$
- *
- * Copyright (C) 2007 OpenWrt.org
- * Copyright (C) 2007 Gabor Juhos <juhosg at openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- *
- */
-
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/io.h>
-
-#include <asm/bootinfo.h>
-#include <asm/addrspace.h>
-
-#include <adm5120_info.h>
-#include <adm5120_defs.h>
-#include <adm5120_switch.h>
-
-unsigned int adm5120_product_code;
-unsigned int adm5120_revision;
-unsigned int adm5120_package;
-unsigned int adm5120_nand_boot;
-unsigned long adm5120_speed;
-
-/*
- * CPU settings detection
- */
-#define CODE_GET_PC(c) ((c) & CODE_PC_MASK)
-#define CODE_GET_REV(c) (((c) >> CODE_REV_SHIFT) & CODE_REV_MASK)
-#define CODE_GET_PK(c) (((c) >> CODE_PK_SHIFT) & CODE_PK_MASK)
-#define CODE_GET_CLKS(c) (((c) >> CODE_CLKS_SHIFT) & CODE_CLKS_MASK)
-#define CODE_GET_NAB(c) (((c) & CODE_NAB) != 0)
-
-void adm5120_ndelay(u32 ns)
-{
- u32 t;
-
- SW_WRITE_REG(SWITCH_REG_TIMER, TIMER_PERIOD_DEFAULT);
- SW_WRITE_REG(SWITCH_REG_TIMER_INT, (TIMER_INT_TOS | TIMER_INT_TOM));
-
- t = (ns+640) / 640;
- t &= TIMER_PERIOD_MASK;
- SW_WRITE_REG(SWITCH_REG_TIMER, t | TIMER_TE);
-
- /* wait until the timer expires */
- do {
- t = SW_READ_REG(SWITCH_REG_TIMER_INT);
- } while ((t & TIMER_INT_TOS) == 0);
-
- /* leave the timer disabled */
- SW_WRITE_REG(SWITCH_REG_TIMER, TIMER_PERIOD_DEFAULT);
- SW_WRITE_REG(SWITCH_REG_TIMER_INT, (TIMER_INT_TOS | TIMER_INT_TOM));
-}
-
-void __init adm5120_soc_init(void)
-{
- u32 code;
- u32 clks;
-
- code = SW_READ_REG(SWITCH_REG_CODE);
-
- adm5120_product_code = CODE_GET_PC(code);
- adm5120_revision = CODE_GET_REV(code);
- adm5120_package = (CODE_GET_PK(code) == CODE_PK_BGA) ?
- ADM5120_PACKAGE_BGA : ADM5120_PACKAGE_PQFP;
- adm5120_nand_boot = CODE_GET_NAB(code);
-
- clks = CODE_GET_CLKS(code);
- adm5120_speed = ADM5120_SPEED_175;
- if (clks & 1)
- adm5120_speed += 25000000;
- if (clks & 2)
- adm5120_speed += 50000000;
-}
diff --git a/target/linux/adm5120/files/arch/mips/adm5120/board.c b/target/linux/adm5120/files/arch/mips/adm5120/board.c
deleted file mode 100644
index 2cbc8f2cc4..0000000000
--- a/target/linux/adm5120/files/arch/mips/adm5120/board.c
+++ /dev/null
@@ -1,118 +0,0 @@
-/*
- * $Id$
- *
- * ADM5120 generic board code
- *
- * Copyright (C) 2007,2008 OpenWrt.org
- * Copyright (C) 2007,2008 Gabor Juhos <juhosg at openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- *
- */
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/list.h>
-#include <linux/device.h>
-#include <linux/platform_device.h>
-
-#include <asm/bootinfo.h>
-
-#include <adm5120_info.h>
-#include <adm5120_defs.h>
-#include <adm5120_irq.h>
-#include <adm5120_board.h>
-#include <adm5120_platform.h>
-
-#define PFX "adm5120: "
-
-static struct list_head adm5120_boards __initdata =
- LIST_HEAD_INIT(adm5120_boards);
-static char adm5120_board_name[ADM5120_BOARD_NAMELEN];
-
-const char *get_system_type(void)
-{
- return adm5120_board_name;
-}
-
-static struct adm5120_board * __init adm5120_board_find(unsigned long machtype)
-{
- struct list_head *this;
- struct adm5120_board *board;
- void *ret;
-
- ret = NULL;
- list_for_each(this, &adm5120_boards) {
- board = list_entry(this, struct adm5120_board, list);
- if (board->mach_type == machtype) {
- ret = board;
- break;
- }
- }
-
- return ret;
-}
-
-static int __init adm5120_board_setup(void)
-{
- struct adm5120_board *board;
- int err;
-
- board = adm5120_board_find(mips_machtype);
- if (board == NULL) {
- printk(KERN_ALERT PFX "no board registered for "
- "machtype %lu, trying generic\n", mips_machtype);
- board = adm5120_board_find(MACH_ADM5120_GENERIC);
- if (board == NULL)
- panic(PFX "unsupported board\n");
- }
-
- printk(KERN_INFO PFX "board is '%s'\n", board->name);
-
- memcpy(&adm5120_board_name, board->name, ADM5120_BOARD_NAMELEN);
-
- adm5120_gpio_init();
-
- adm5120_board_reset = board->board_reset;
- if (board->eth_num_ports > 0)
- adm5120_eth_num_ports = board->eth_num_ports;
-
- if (board->eth_vlans)
- memcpy(adm5120_eth_vlans, board->eth_vlans,
- sizeof(adm5120_eth_vlans));
-
- if (board->board_setup)
- board->board_setup();
-
- /* register UARTs */
- amba_device_register(&adm5120_uart0_device, &iomem_resource);
- amba_device_register(&adm5120_uart1_device, &iomem_resource);
-
- /* register built-in ethernet switch */
- platform_device_register(&adm5120_switch_device);
-
- if (adm5120_package_pqfp())
- adm5120_gpiodev_resource.start &= ~0xf0;
-
- platform_device_register(&adm5120_gpiodev_device);
-
- /* setup PCI irq map */
- adm5120_pci_set_irq_map(board->pci_nr_irqs, board->pci_irq_map);
-
- /* register board devices */
- if (board->num_devices > 0 && board->devices != NULL) {
- err = platform_add_devices(board->devices, board->num_devices);
- if (err)
- printk(KERN_ALERT PFX "adding board devices failed\n");
- }
-
- return 0;
-}
-arch_initcall(adm5120_board_setup);
-
-void __init adm5120_board_register(struct adm5120_board *board)
-{
- list_add_tail(&board->list, &adm5120_boards);
-}
diff --git a/target/linux/adm5120/files/arch/mips/adm5120/boards/Makefile b/target/linux/adm5120/files/arch/mips/adm5120/boards/Makefile
deleted file mode 100644
index a05c891565..0000000000
--- a/target/linux/adm5120/files/arch/mips/adm5120/boards/Makefile
+++ /dev/null
@@ -1,11 +0,0 @@
-#
-# Makefile for platforms based on ADM5120 SoC
-#
-
-obj-y += generic.o
-obj-y += cellvision.o
-obj-y += compex.o
-obj-y += edimax.o
-obj-y += infineon.o
-obj-y += mikrotik.o
-obj-y += zyxel.o
diff --git a/target/linux/adm5120/files/arch/mips/adm5120/boards/cellvision.c b/target/linux/adm5120/files/arch/mips/adm5120/boards/cellvision.c
deleted file mode 100644
index d3e7c7dbe4..0000000000
--- a/target/linux/adm5120/files/arch/mips/adm5120/boards/cellvision.c
+++ /dev/null
@@ -1,208 +0,0 @@
-/*
- * $Id$
- *
- * Cellvision/SparkLAN boards
- *
- * Copyright (C) 2007 OpenWrt.org
- * Copyright (C) 2007 Gabor Juhos <juhosg at openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-
-#include <asm/bootinfo.h>
-#include <asm/gpio.h>
-
-#include <adm5120_board.h>
-#include <adm5120_platform.h>
-#include <adm5120_irq.h>
-
-#define CAS6XX_GPIO_DEV_MASK (1 << ADM5120_GPIO_PIN5)
-#define CAS7XX_GPIO_DEV_MASK (1 << ADM5120_GPIO_PIN5)
-#define NFS_GPIO_DEV_MASK (1 << ADM5120_GPIO_PIN5)
-
-static void switch_bank_gpio5(unsigned bank)
-{
- switch (bank) {
- case 0:
- gpio_set_value(ADM5120_GPIO_PIN5, 0);
- break;
- case 1:
- gpio_set_value(ADM5120_GPIO_PIN5, 1);
- break;
- }
-}
-
-static struct adm5120_pci_irq cas771_pci_irqs[] __initdata = {
- PCIIRQ(2, 0, 1, ADM5120_IRQ_PCI0),
- PCIIRQ(3, 0, 1, ADM5120_IRQ_PCI1),
- PCIIRQ(3, 2, 3, ADM5120_IRQ_PCI2)
-};
-
-static struct mtd_partition cas6xx_partitions[] = {
- {
- .name = "admboot",
- .offset = 0,
- .size = 32*1024,
- .mask_flags = MTD_WRITEABLE,
- } , {
- .name = "config",
- .offset = MTDPART_OFS_APPEND,
- .size = 32*1024,
- } , {
- .name = "nvfs1",
- .offset = MTDPART_OFS_APPEND,
- .size = 64*1024,
- } , {
- .name = "nvfs2",
- .offset = MTDPART_OFS_APPEND,
- .size = 64*1024,
- } , {
- .name = "firmware",
- .offset = MTDPART_OFS_APPEND,
- .size = MTDPART_SIZ_FULL,
- }
-};
-
-static struct mtd_partition cas7xx_partitions[] = {
- {
- .name = "admboot",
- .offset = 0,
- .size = 32*1024,
- .mask_flags = MTD_WRITEABLE,
- } , {
- .name = "config",
- .offset = MTDPART_OFS_APPEND,
- .size = 32*1024,
- } , {
- .name = "nvfs",
- .offset = MTDPART_OFS_APPEND,
- .size = 128*1024,
- } , {
- .name = "firmware",
- .offset = MTDPART_OFS_APPEND,
- .size = MTDPART_SIZ_FULL,
- }
-};
-
-static struct platform_device *cas6xx_devices[] __initdata = {
- &adm5120_flash0_device,
-};
-
-static struct platform_device *cas7xx_devices[] __initdata = {
- &adm5120_flash0_device,
-};
-
-static void __init cas6xx_setup(void)
-{
- gpio_request(ADM5120_GPIO_PIN5, NULL); /* for flash A20 line */
- gpio_direction_output(ADM5120_GPIO_PIN5, 0);
-
- /* setup data for flash0 device */
- adm5120_flash0_data.switch_bank = switch_bank_gpio5;
- adm5120_flash0_data.nr_parts = ARRAY_SIZE(cas6xx_partitions);
- adm5120_flash0_data.parts = cas6xx_partitions;
-
- adm5120_gpiodev_resource.start &= ~CAS6XX_GPIO_DEV_MASK;
-
- /* TODO: setup mac address */
-}
-
-static void __init cas7xx_setup(void)
-{
- gpio_request(ADM5120_GPIO_PIN5, NULL); /* for flash A20 line */
- gpio_direction_output(ADM5120_GPIO_PIN5, 0);
-
- /* setup data for flash0 device */
- adm5120_flash0_data.switch_bank = switch_bank_gpio5;
- adm5120_flash0_data.nr_parts = ARRAY_SIZE(cas7xx_partitions);
- adm5120_flash0_data.parts = cas7xx_partitions;
-
- adm5120_gpiodev_resource.start &= ~CAS7XX_GPIO_DEV_MASK;
-
- /* TODO: setup mac address */
-}
-
-static void __init nfs_setup(void)
-{
- gpio_request(ADM5120_GPIO_PIN5, NULL); /* for flash A20 line */
- gpio_direction_output(ADM5120_GPIO_PIN5, 0);
-
- /* setup data for flash0 device */
- adm5120_flash0_data.switch_bank = switch_bank_gpio5;
- adm5120_flash0_data.nr_parts = ARRAY_SIZE(cas6xx_partitions);
- adm5120_flash0_data.parts = cas6xx_partitions;
-
- adm5120_gpiodev_resource.start &= ~NFS_GPIO_DEV_MASK;
-
- /* TODO: setup mac address */
-}
-
-unsigned char nfs_vlans[6] = { /* TODO: not tested */
- 0x41, 0x42, 0x44, 0x48, 0x50, 0x00
-};
-
-/*--------------------------------------------------------------------------*/
-
-ADM5120_BOARD_START(CAS630, "Cellvision CAS-630/630W")
- .board_setup = cas6xx_setup,
- .eth_num_ports = 1,
- .num_devices = ARRAY_SIZE(cas6xx_devices),
- .devices = cas6xx_devices,
- /* TODO: PCI IRQ map */
-ADM5120_BOARD_END
-
-ADM5120_BOARD_START(CAS670, "Cellvision CAS-670/670W")
- .board_setup = cas6xx_setup,
- .eth_num_ports = 1,
- .num_devices = ARRAY_SIZE(cas6xx_devices),
- .devices = cas6xx_devices,
- /* TODO: PCI IRQ map */
-ADM5120_BOARD_END
-
-ADM5120_BOARD_START(CAS700, "Cellvision CAS-700/700W")
- .board_setup = cas7xx_setup,
- .eth_num_ports = 1,
- .num_devices = ARRAY_SIZE(cas7xx_devices),
- .devices = cas7xx_devices,
- /* TODO: PCI IRQ map */
-ADM5120_BOARD_END
-
-ADM5120_BOARD_START(CAS771, "Cellvision CAS-771/771W")
- .board_setup = cas7xx_setup,
- .eth_num_ports = 1,
- .num_devices = ARRAY_SIZE(cas7xx_devices),
- .devices = cas7xx_devices,
- .pci_nr_irqs = ARRAY_SIZE(cas771_pci_irqs),
- .pci_irq_map = cas771_pci_irqs,
-ADM5120_BOARD_END
-
-ADM5120_BOARD_START(CAS790, "Cellvision CAS-790")
- .board_setup = cas7xx_setup,
- .eth_num_ports = 1,
- .num_devices = ARRAY_SIZE(cas7xx_devices),
- .devices = cas7xx_devices,
- /* TODO: PCI IRQ map */
-ADM5120_BOARD_END
-
-ADM5120_BOARD_START(CAS861, "Cellvision CAS-861/861W")
- .board_setup = cas7xx_setup,
- .eth_num_ports = 1,
- .num_devices = ARRAY_SIZE(cas7xx_devices),
- .devices = cas7xx_devices,
- /* TODO: PCI IRQ map */
-ADM5120_BOARD_END
-
-ADM5120_BOARD_START(NFS101U, "Cellvision NFS-101U/101WU")
- .board_setup = nfs_setup,
- .eth_num_ports = 5,
- .eth_vlans = nfs_vlans,
- .num_devices = ARRAY_SIZE(cas6xx_devices),
- .devices = cas6xx_devices,
- /* TODO: PCI IRQ map */
-ADM5120_BOARD_END
diff --git a/target/linux/adm5120/files/arch/mips/adm5120/boards/compex.c b/target/linux/adm5120/files/arch/mips/adm5120/boards/compex.c
deleted file mode 100644
index 71fa17dd04..0000000000
--- a/target/linux/adm5120/files/arch/mips/adm5120/boards/compex.c
+++ /dev/null
@@ -1,240 +0,0 @@
-/*
- * $Id$
- *
- * Compex boards
- *
- * Copyright (C) 2007-2008 OpenWrt.org
- * Copyright (C) 2007-2008 Gabor Juhos <juhosg at openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-
-#include <asm/bootinfo.h>
-#include <asm/gpio.h>
-
-#include <adm5120_board.h>
-#include <adm5120_platform.h>
-#include <adm5120_irq.h>
-
-#define NP27G_GPIO_DEV_MASK (1 << ADM5120_GPIO_PIN5)
-#define NP28G_GPIO_DEV_MASK ( 1 << ADM5120_GPIO_PIN5 \
- | 1 << ADM5120_GPIO_PIN4)
-
-#define WP54_GPIO_DEV_MASK ( 1 << ADM5120_GPIO_PIN5 \
- | 1 << ADM5120_GPIO_PIN3)
-
-static struct adm5120_pci_irq wp54_pci_irqs[] __initdata = {
- PCIIRQ(2, 0, 1, ADM5120_IRQ_PCI0),
-};
-
-static struct adm5120_pci_irq np28g_pci_irqs[] __initdata = {
- PCIIRQ(2, 0, 1, ADM5120_IRQ_PCI0),
- PCIIRQ(3, 0, 1, ADM5120_IRQ_PCI0),
- PCIIRQ(3, 1, 2, ADM5120_IRQ_PCI1),
- PCIIRQ(3, 2, 3, ADM5120_IRQ_PCI2)
-};
-
-static struct mtd_partition wp54g_wrt_partitions[] = {
- {
- .name = "cfe",
- .offset = 0,
- .size = 0x050000,
- .mask_flags = MTD_WRITEABLE,
- } , {
- .name = "trx",
- .offset = MTDPART_OFS_APPEND,
- .size = 0x3A0000,
- } , {
- .name = "nvram",
- .offset = MTDPART_OFS_APPEND,
- .size = 0x010000,
- }
-};
-
-static struct platform_device *np2xg_devices[] __initdata = {
- &adm5120_flash0_device,
- &adm5120_hcd_device,
-};
-
-static struct platform_device *wp54_devices[] __initdata = {
- &adm5120_flash0_device,
- &adm5120_buttons_device,
-};
-
-unsigned char np27g_vlans[6] __initdata = {
- /* FIXME: untested */
- 0x41, 0x42, 0x44, 0x48, 0x50, 0x00
-};
-
-unsigned char np28g_vlans[6] __initdata = {
- 0x50, 0x42, 0x44, 0x48, 0x00, 0x00
-};
-
-unsigned char wp54_vlans[6] __initdata = {
- 0x41, 0x42, 0x00, 0x00, 0x00, 0x00
-};
-
-/*--------------------------------------------------------------------------*/
-
-static void switch_bank_gpio5(unsigned bank)
-{
- switch (bank) {
- case 0:
- gpio_set_value(ADM5120_GPIO_PIN5, 0);
- break;
- case 1:
- gpio_set_value(ADM5120_GPIO_PIN5, 1);
- break;
- }
-}
-
-static void wp54_reset(void)
-{
- gpio_set_value(ADM5120_GPIO_PIN3, 0);
-}
-
-static void np28g_reset(void)
-{
- gpio_set_value(ADM5120_GPIO_PIN4, 0);
-}
-
-static void __init np27g_setup(void)
-{
- gpio_request(ADM5120_GPIO_PIN5, NULL); /* for flash A20 line */
- gpio_direction_output(ADM5120_GPIO_PIN5, 0);
-
- /* setup data for flash0 device */
- adm5120_flash0_data.switch_bank = switch_bank_gpio5;
- adm5120_gpiodev_resource.start &= ~NP27G_GPIO_DEV_MASK;
-
- /* TODO: setup mac address */
-}
-
-static void __init np28g_setup(void)
-{
- gpio_request(ADM5120_GPIO_PIN5, NULL); /* for flash A20 line */
- gpio_direction_output(ADM5120_GPIO_PIN5, 0);
-
- gpio_request(ADM5120_GPIO_PIN4, NULL); /* for system reset */
- gpio_direction_output(ADM5120_GPIO_PIN4, 1);
-
- /* setup data for flash0 device */
- adm5120_flash0_data.switch_bank = switch_bank_gpio5;
-
- adm5120_gpiodev_resource.start &= ~NP28G_GPIO_DEV_MASK;
-
- /* TODO: setup mac address */
-}
-
-static void __init wp54_setup(void)
-{
- gpio_request(ADM5120_GPIO_PIN5, NULL); /* for flash A20 line */
- gpio_direction_output(ADM5120_GPIO_PIN5, 0);
-
- gpio_request(ADM5120_GPIO_PIN3, NULL); /* for system reset */
- gpio_direction_output(ADM5120_GPIO_PIN3, 1);
-
- /* setup data for flash0 device */
- adm5120_flash0_data.switch_bank = switch_bank_gpio5;
-
- adm5120_buttons_data.nbuttons = 1;
- adm5120_buttons[0].desc = "reset button";
- adm5120_buttons[0].gpio = ADM5120_GPIO_PIN4;
-
- adm5120_gpiodev_resource.start &= ~WP54_GPIO_DEV_MASK;
-
- /* TODO: setup mac address */
-}
-
-static void __init wp54_wrt_setup(void)
-{
- wp54_setup();
-
- adm5120_flash0_data.nr_parts = ARRAY_SIZE(wp54g_wrt_partitions);
- adm5120_flash0_data.parts = wp54g_wrt_partitions;
-
- /* TODO: setup mac address */
-}
-
-/*--------------------------------------------------------------------------*/
-
-ADM5120_BOARD_START(NP27G, "Compex NetPassage 27G")
- .board_setup = np27g_setup,
- .eth_num_ports = 5,
- .eth_vlans = np27g_vlans,
- .num_devices = ARRAY_SIZE(np2xg_devices),
- .devices = np2xg_devices,
- /* TODO: add PCI IRQ map */
-ADM5120_BOARD_END
-
-ADM5120_BOARD_START(NP28G, "Compex NetPassage 28G")
- .board_setup = np28g_setup,
- .board_reset = np28g_reset,
- .eth_num_ports = 4,
- .eth_vlans = np28g_vlans,
- .num_devices = ARRAY_SIZE(np2xg_devices),
- .devices = np2xg_devices,
- .pci_nr_irqs = ARRAY_SIZE(np28g_pci_irqs),
- .pci_irq_map = np28g_pci_irqs,
-ADM5120_BOARD_END
-
-ADM5120_BOARD_START(WP54AG, "Compex WP54AG")
- .board_setup = wp54_setup,
- .board_reset = wp54_reset,
- .eth_num_ports = 2,
- .eth_vlans = wp54_vlans,
- .num_devices = ARRAY_SIZE(wp54_devices),
- .devices = wp54_devices,
- .pci_nr_irqs = ARRAY_SIZE(wp54_pci_irqs),
- .pci_irq_map = wp54_pci_irqs,
-ADM5120_BOARD_END
-
-ADM5120_BOARD_START(WP54G, "Compex WP54G")
- .board_setup = wp54_setup,
- .board_reset = wp54_reset,
- .eth_num_ports = 2,
- .eth_vlans = wp54_vlans,
- .num_devices = ARRAY_SIZE(wp54_devices),
- .devices = wp54_devices,
- .pci_nr_irqs = ARRAY_SIZE(wp54_pci_irqs),
- .pci_irq_map = wp54_pci_irqs,
-ADM5120_BOARD_END
-
-ADM5120_BOARD_START(WP54G_WRT, "Compex WP54G-WRT")
- .board_setup = wp54_wrt_setup,
- .board_reset = wp54_reset,
- .eth_num_ports = 2,
- .eth_vlans = wp54_vlans,
- .num_devices = ARRAY_SIZE(wp54_devices),
- .devices = wp54_devices,
- .pci_nr_irqs = ARRAY_SIZE(wp54_pci_irqs),
- .pci_irq_map = wp54_pci_irqs,
-ADM5120_BOARD_END
-
-ADM5120_BOARD_START(WPP54AG, "Compex WPP54AG")
- .board_setup = wp54_setup,
- .board_reset = wp54_reset,
- .eth_num_ports = 2,
- .eth_vlans = wp54_vlans,
- .num_devices = ARRAY_SIZE(wp54_devices),
- .devices = wp54_devices,
- .pci_nr_irqs = ARRAY_SIZE(wp54_pci_irqs),
- .pci_irq_map = wp54_pci_irqs,
-ADM5120_BOARD_END
-
-ADM5120_BOARD_START(WPP54G, "Compex WPP54G")
- .board_setup = wp54_setup,
- .board_reset = wp54_reset,
- .eth_num_ports = 2,
- .eth_vlans = wp54_vlans,
- .num_devices = ARRAY_SIZE(wp54_devices),
- .devices = wp54_devices,
- .pci_nr_irqs = ARRAY_SIZE(wp54_pci_irqs),
- .pci_irq_map = wp54_pci_irqs,
-ADM5120_BOARD_END
diff --git a/target/linux/adm5120/files/arch/mips/adm5120/boards/edimax.c b/target/linux/adm5120/files/arch/mips/adm5120/boards/edimax.c
deleted file mode 100644
index 65023ab662..0000000000
--- a/target/linux/adm5120/files/arch/mips/adm5120/boards/edimax.c
+++ /dev/null
@@ -1,90 +0,0 @@
-/*
- * $Id$
- *
- * Edimax boards
- *
- * Copyright (C) 2007-2008 OpenWrt.org
- * Copyright (C) 2007-2008 Gabor Juhos <juhosg at openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-
-#include <asm/bootinfo.h>
-#include <asm/gpio.h>
-
-#include <adm5120_board.h>
-#include <adm5120_irq.h>
-#include <adm5120_platform.h>
-
-static struct adm5120_pci_irq br61xx_pci_irqs[] __initdata = {
- PCIIRQ(2, 0, 1, ADM5120_IRQ_PCI0),
-};
-
-static struct mtd_partition br61xx_partitions[] = {
- {
- .name = "admboot",
- .offset = 0,
- .size = 32*1024,
- .mask_flags = MTD_WRITEABLE,
- } , {
- .name = "config",
- .offset = MTDPART_OFS_APPEND,
- .size = 32*1024,
- } , {
- .name = "firmware",
- .offset = MTDPART_OFS_APPEND,
- .size = MTDPART_SIZ_FULL,
- }
-};
-
-static struct platform_device *br6104k_devices[] __initdata = {
- &adm5120_flash0_device,
- &adm5120_hcd_device,
- &adm5120_buttons_device,
-};
-
-static struct platform_device *br61x4wg_devices[] __initdata = {
- &adm5120_flash0_device,
-};
-
-static void __init br61xx_setup(void) {
- /* setup data for flash0 device */
- adm5120_flash0_data.nr_parts = ARRAY_SIZE(br61xx_partitions);
- adm5120_flash0_data.parts = br61xx_partitions;
-
- adm5120_buttons_data.nbuttons = 1;
- adm5120_buttons[0].desc = "reset button";
- adm5120_buttons[0].gpio = ADM5120_GPIO_PIN2;
-
- /* TODO: setup mac addresses, if possible */
-}
-
-unsigned char br61xx_vlans[6] = {
- 0x41, 0x42, 0x44, 0x48, 0x50, 0x00
-};
-
-/*--------------------------------------------------------------------------*/
-
-ADM5120_BOARD_START(BR6104K, "Edimax BR-6104K/6104KP")
- .board_setup = br61xx_setup,
- .eth_num_ports = 5,
- .eth_vlans = br61xx_vlans,
- .num_devices = ARRAY_SIZE(br6104k_devices),
- .devices = br6104k_devices,
-ADM5120_BOARD_END
-
-ADM5120_BOARD_START(BR61x4WG, "Edimax BR-6104WG/6114WG")
- .board_setup = br61xx_setup,
- .eth_num_ports = 5,
- .eth_vlans = br61xx_vlans,
- .num_devices = ARRAY_SIZE(br61x4wg_devices),
- .devices = br61x4wg_devices,
- .pci_nr_irqs = ARRAY_SIZE(br61xx_pci_irqs),
- .pci_irq_map = br61xx_pci_irqs,
-ADM5120_BOARD_END
diff --git a/target/linux/adm5120/files/arch/mips/adm5120/boards/generic.c b/target/linux/adm5120/files/arch/mips/adm5120/boards/generic.c
deleted file mode 100644
index e120577695..0000000000
--- a/target/linux/adm5120/files/arch/mips/adm5120/boards/generic.c
+++ /dev/null
@@ -1,35 +0,0 @@
-/*
- * $Id$
- *
- * Generic ADM5120 based board
- *
- * Copyright (C) 2007 OpenWrt.org
- * Copyright (C) 2007 Gabor Juhos <juhosg at openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-
-#include <asm/bootinfo.h>
-#include <asm/gpio.h>
-
-#include <adm5120_board.h>
-#include <adm5120_platform.h>
-
-static struct platform_device *generic_devices[] __initdata = {
- &adm5120_flash0_device,
- &adm5120_hcd_device,
-};
-
-/*--------------------------------------------------------------------------*/
-
-ADM5120_BOARD_START(GENERIC, "Generic ADM5120 board")
- .eth_num_ports = 6,
- .num_devices = ARRAY_SIZE(generic_devices),
- .devices = generic_devices,
-ADM5120_BOARD_END
diff --git a/target/linux/adm5120/files/arch/mips/adm5120/boards/infineon.c b/target/linux/adm5120/files/arch/mips/adm5120/boards/infineon.c
deleted file mode 100644
index c8680d6c4a..0000000000
--- a/target/linux/adm5120/files/arch/mips/adm5120/boards/infineon.c
+++ /dev/null
@@ -1,160 +0,0 @@
-/*
- * $Id$
- *
- * Infineon boards
- *
- * Copyright (C) 2007 OpenWrt.org
- * Copyright (C) 2007,2008 Gabor Juhos <juhosg at openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-
-#include <asm/bootinfo.h>
-#include <asm/gpio.h>
-
-#include <adm5120_defs.h>
-#include <adm5120_irq.h>
-#include <adm5120_board.h>
-#include <adm5120_platform.h>
-#include <adm5120_info.h>
-
-#define EASY_PQFP_GPIO_DEV_MASK (1 << ADM5120_GPIO_PIN3)
-#define EASY_BGA_GPIO_DEV_MASK (1 << ADM5120_GPIO_PIN5)
-
-static void switch_bank_gpio3(unsigned bank)
-{
- switch (bank) {
- case 0:
- gpio_set_value(ADM5120_GPIO_PIN3, 0);
- break;
- case 1:
- gpio_set_value(ADM5120_GPIO_PIN3, 1);
- break;
- }
-}
-
-static void switch_bank_gpio5(unsigned bank)
-{
- switch (bank) {
- case 0:
- gpio_set_value(ADM5120_GPIO_PIN5, 0);
- break;
- case 1:
- gpio_set_value(ADM5120_GPIO_PIN5, 1);
- break;
- }
-}
-
-static struct mtd_partition easy_partitions[] = {
- {
- .name = "admboot",
- .offset = 0,
- .size = 64*1024,
- .mask_flags = MTD_WRITEABLE,
- } , {
- .name = "boardcfg",
- .offset = MTDPART_OFS_APPEND,
- .size = 64*1024,
- } , {
- .name = "firmware",
- .offset = MTDPART_OFS_APPEND,
- .size = MTDPART_SIZ_FULL,
- }
-};
-
-static struct adm5120_pci_irq easy5120rt_pci_irqs[] __initdata = {
- PCIIRQ(2, 0, 1, ADM5120_IRQ_PCI0),
-};
-
-static struct platform_device *easy5120pata_devices[] __initdata = {
- &adm5120_flash0_device,
- /* TODO: add VINETIC2 device? */
-};
-
-static struct platform_device *easy5120rt_devices[] __initdata = {
- &adm5120_flash0_device,
- &adm5120_hcd_device,
-};
-
-static struct platform_device *easy5120wvoip_devices[] __initdata = {
- &adm5120_flash0_device,
- /* TODO: add VINETIC2 device? */
-};
-
-static struct platform_device *easy83000_devices[] __initdata = {
- &adm5120_flash0_device,
- /* TODO: add VINAX device? */
-};
-
-static void __init easy_setup_pqfp(void)
-{
- gpio_request(ADM5120_GPIO_PIN3, NULL); /* for flash A20 line */
- gpio_direction_output(ADM5120_GPIO_PIN3, 0);
-
- /* setup data for flash0 device */
- adm5120_flash0_data.switch_bank = switch_bank_gpio3;
- adm5120_flash0_data.nr_parts = ARRAY_SIZE(easy_partitions);
- adm5120_flash0_data.parts = easy_partitions;
-
- adm5120_gpiodev_resource.start &= ~EASY_PQFP_GPIO_DEV_MASK;
-
- /* TODO: setup mac addresses */
-}
-
-static void __init easy_setup_bga(void)
-{
- gpio_request(ADM5120_GPIO_PIN5, NULL); /* for flash A20 line */
- gpio_direction_output(ADM5120_GPIO_PIN5, 0);
-
- /* setup data for flash0 device */
- adm5120_flash0_data.switch_bank = switch_bank_gpio5;
- adm5120_flash0_data.nr_parts = ARRAY_SIZE(easy_partitions);
- adm5120_flash0_data.parts = easy_partitions;
-
- adm5120_gpiodev_resource.start &= ~EASY_BGA_GPIO_DEV_MASK;
-
- /* TODO: setup mac addresses */
-}
-
-unsigned char easy5120rt_vlans[6] = {
- 0x41, 0x42, 0x44, 0x48, 0x50, 0x00
-};
-
-/*--------------------------------------------------------------------------*/
-
-ADM5120_BOARD_START(EASY5120PATA, "Infineon EASY 5120P-ATA Reference Board")
- .board_setup = easy_setup_pqfp,
- .eth_num_ports = 6,
- .num_devices = ARRAY_SIZE(easy5120pata_devices),
- .devices = easy5120pata_devices,
-ADM5120_BOARD_END
-
-ADM5120_BOARD_START(EASY5120RT, "Infineon EASY 5120-RT Reference Board")
- .board_setup = easy_setup_bga,
- .eth_num_ports = 5,
- .eth_vlans = easy5120rt_vlans,
- .num_devices = ARRAY_SIZE(easy5120rt_devices),
- .devices = easy5120rt_devices,
- .pci_nr_irqs = ARRAY_SIZE(easy5120rt_pci_irqs),
- .pci_irq_map = easy5120rt_pci_irqs,
-ADM5120_BOARD_END
-
-ADM5120_BOARD_START(EASY5120WVOIP, "Infineon EASY 5120-WVoIP Reference Board")
- .board_setup = easy_setup_bga,
- .eth_num_ports = 6,
- .num_devices = ARRAY_SIZE(easy5120wvoip_devices),
- .devices = easy5120wvoip_devices,
-ADM5120_BOARD_END
-
-ADM5120_BOARD_START(EASY83000, "Infineon EASY 83000 Reference Board")
- .board_setup = easy_setup_pqfp,
- .eth_num_ports = 6,
- .num_devices = ARRAY_SIZE(easy83000_devices),
- .devices = easy83000_devices,
-ADM5120_BOARD_END
diff --git a/target/linux/adm5120/files/arch/mips/adm5120/boards/mikrotik.c b/target/linux/adm5120/files/arch/mips/adm5120/boards/mikrotik.c
deleted file mode 100644
index 9595e815f7..0000000000
--- a/target/linux/adm5120/files/arch/mips/adm5120/boards/mikrotik.c
+++ /dev/null
@@ -1,378 +0,0 @@
-/*
- * $Id$
- *
- * Mikrotik RouterBOARD 1xx series
- *
- * Copyright (C) 2007-2008 OpenWrt.org
- * Copyright (C) 2007-2008 Gabor Juhos <juhosg at openwrt.org>
- *
- * NAND initialization code was based on a driver for Linux 2.6.19+ which
- * was derived from the driver for Linux 2.4.xx published by Mikrotik for
- * their RouterBoard 1xx and 5xx series boards.
- * Copyright (C) 2007 David Goodenough <david.goodenough@linkchoose.co.uk>
- * Copyright (C) 2007 Florian Fainelli <florian@openwrt.org>
- * The original Mikrotik code seems not to have a license.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-
-#include <asm/bootinfo.h>
-#include <asm/gpio.h>
-
-#include <adm5120_defs.h>
-#include <adm5120_irq.h>
-#include <adm5120_nand.h>
-#include <adm5120_board.h>
-#include <adm5120_platform.h>
-#include <adm5120_info.h>
-
-#include <prom/routerboot.h>
-
-#define RB1XX_NAND_CHIP_DELAY 25
-
-#define RB150_NAND_BASE 0x1FC80000
-#define RB150_NAND_SIZE 1
-
-#define RB150_GPIO_NAND_READY ADM5120_GPIO_PIN0
-#define RB150_GPIO_NAND_NCE ADM5120_GPIO_PIN1
-#define RB150_GPIO_NAND_CLE ADM5120_GPIO_P2L2
-#define RB150_GPIO_NAND_ALE ADM5120_GPIO_P3L2
-#define RB150_GPIO_DEV_MASK ( 1 << RB150_GPIO_NAND_READY \
- | 1 << RB150_GPIO_NAND_NCE \
- | 1 << RB150_GPIO_NAND_CLE \
- | 1 << RB150_GPIO_NAND_ALE)
-
-#define RB150_NAND_DELAY 100
-
-#define RB150_NAND_WRITE(v) \
- writeb((v), (void __iomem *)KSEG1ADDR(RB150_NAND_BASE))
-
-#define RB153_GPIO_DEV_MASK ( 1 << ADM5120_GPIO_PIN0 \
- | 1 << ADM5120_GPIO_PIN3 \
- | 1 << ADM5120_GPIO_PIN4 )
-
-/*--------------------------------------------------------------------------*/
-
-static struct adm5120_pci_irq rb1xx_pci_irqs[] __initdata = {
- PCIIRQ(1, 0, 1, ADM5120_IRQ_PCI0),
- PCIIRQ(2, 0, 1, ADM5120_IRQ_PCI1),
- PCIIRQ(3, 0, 1, ADM5120_IRQ_PCI2)
-};
-
-static struct mtd_partition rb1xx_nor_parts[] = {
- {
- .name = "booter",
- .offset = 0,
- .size = 64*1024,
- .mask_flags = MTD_WRITEABLE,
- } , {
- .name = "firmware",
- .offset = MTDPART_OFS_APPEND,
- .size = MTDPART_SIZ_FULL,
- }
-};
-
-static struct mtd_partition rb1xx_nand_parts[] = {
- {
- .name = "kernel",
- .offset = 0,
- .size = 4 * 1024 * 1024,
- } , {
- .name = "rootfs",
- .offset = MTDPART_OFS_NXTBLK,
- .size = MTDPART_SIZ_FULL
- }
-};
-
-static struct platform_device *rb1xx_devices[] __initdata = {
- &adm5120_flash0_device,
- &adm5120_nand_device,
- &adm5120_buttons_device,
-};
-
-/*
- * We need to use the OLD Yaffs-1 OOB layout, otherwise the RB bootloader
- * will not be able to find the kernel that we load. So set the oobinfo
- * when creating the partitions
- */
-static struct nand_ecclayout rb1xx_nand_ecclayout = {
- .eccbytes = 6,
- .eccpos = { 8, 9, 10, 13, 14, 15 },
- .oobavail = 9,
- .oobfree = { { 0, 4 }, { 6, 2 }, { 11, 2 }, { 4, 1 } }
-};
-
-static struct resource rb150_nand_resource[] = {
- [0] = {
- .start = RB150_NAND_BASE,
- .end = RB150_NAND_BASE + RB150_NAND_SIZE-1,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct resource rb153_cf_resources[] = {
- {
- .name = "cf_membase",
- .start = ADM5120_EXTIO1_BASE,
- .end = ADM5120_EXTIO1_BASE + ADM5120_EXTIO1_SIZE-1 ,
- .flags = IORESOURCE_MEM
- }, {
- .name = "cf_irq",
- .start = ADM5120_IRQ_GPIO4,
- .end = ADM5120_IRQ_GPIO4,
- .flags = IORESOURCE_IRQ
- }
-};
-
-static struct platform_device rb153_cf_device = {
- .name = "pata-rb153-cf",
- .id = -1,
- .resource = rb153_cf_resources,
- .num_resources = ARRAY_SIZE(rb153_cf_resources),
-};
-
-static struct platform_device *rb153_devices[] __initdata = {
- &adm5120_flash0_device,
- &adm5120_nand_device,
- &adm5120_buttons_device,
- &rb153_cf_device,
-};
-
-#if 0
-/*
- * RB1xx boards have bad network performance with the default VLAN matrixes.
- * Disable it while the ethernet driver gets fixed.
- */
-static unsigned char rb11x_vlans[6] __initdata = {
- /* FIXME: untested */
- 0x41, 0x00, 0x00, 0x00, 0x00, 0x00
-};
-
-static unsigned char rb133_vlans[6] __initdata = {
- /* FIXME: untested */
- 0x44, 0x42, 0x41, 0x00, 0x00, 0x00
-};
-
-static unsigned char rb133c_vlans[6] __initdata = {
- /* FIXME: untested */
- 0x44, 0x00, 0x00, 0x00, 0x00, 0x00
-};
-
-static unsigned char rb15x_vlans[6] __initdata = {
- /* FIXME: untested */
- 0x41, 0x42, 0x44, 0x48, 0x50, 0x00
-};
-
-static unsigned char rb192_vlans[6] __initdata = {
- /* FIXME: untested */
- 0x41, 0x50, 0x48, 0x44, 0x42, 0x00
-};
-#else
-static unsigned char rb_vlans[6] __initdata = {
- 0x7F, 0x00, 0x00, 0x00, 0x00, 0x00
-};
-#define rb11x_vlans rb_vlans
-#define rb133_vlans rb_vlans
-#define rb133c_vlans rb_vlans
-#define rb15x_vlans rb_vlans
-#define rb192_vlans rb_vlans
-#endif
-
-/*--------------------------------------------------------------------------*/
-
-static int rb150_nand_ready(struct mtd_info *mtd)
-{
- return gpio_get_value(RB150_GPIO_NAND_READY);
-}
-
-static void rb150_nand_cmd_ctrl(struct mtd_info *mtd, int cmd,
- unsigned int ctrl)
-{
- if (ctrl & NAND_CTRL_CHANGE) {
- gpio_set_value(RB150_GPIO_NAND_CLE, (ctrl & NAND_CLE) ? 1 : 0);
- gpio_set_value(RB150_GPIO_NAND_ALE, (ctrl & NAND_ALE) ? 1 : 0);
- gpio_set_value(RB150_GPIO_NAND_NCE, (ctrl & NAND_NCE) ? 0 : 1);
- }
-
- udelay(RB150_NAND_DELAY);
-
- if (cmd != NAND_CMD_NONE)
- RB150_NAND_WRITE(cmd);
-}
-
-/*--------------------------------------------------------------------------*/
-
-static void __init rb1xx_mac_setup(void)
-{
- int i, j;
-
- if (!rb_hs.mac_base)
- return;
-
- for (i = 0; i < 6; i++) {
- for (j = 0; j < 5; j++)
- adm5120_eth_macs[i][j] = rb_hs.mac_base[j];
- adm5120_eth_macs[i][5] = rb_hs.mac_base[5]+i;
- }
-}
-
-static int rb1xx_nand_fixup(struct mtd_info *mtd)
-{
- struct nand_chip *chip = mtd->priv;
-
- if (mtd->writesize == 512)
- chip->ecc.layout = &rb1xx_nand_ecclayout;
-
- return 0;
-}
-
-static void __init rb1xx_flash_setup(void)
-{
- /* setup data for flash0 device */
- adm5120_flash0_data.nr_parts = ARRAY_SIZE(rb1xx_nor_parts);
- adm5120_flash0_data.parts = rb1xx_nor_parts;
-
- /* setup data for NAND device */
- adm5120_nand_data.chip.nr_chips = 1;
- adm5120_nand_data.chip.nr_partitions = ARRAY_SIZE(rb1xx_nand_parts);
- adm5120_nand_data.chip.partitions = rb1xx_nand_parts;
- adm5120_nand_data.chip.chip_delay = RB1XX_NAND_CHIP_DELAY;
- adm5120_nand_data.chip.options = NAND_NO_AUTOINCR;
-
- adm5120_nand_data.chip.chip_fixup = &rb1xx_nand_fixup;
-}
-
-static void __init rb1xx_setup(void)
-{
- /* enable NAND flash interface */
- adm5120_nand_enable();
-
- /* initialize NAND chip */
- adm5120_nand_set_spn(1);
- adm5120_nand_set_wpn(0);
-
- adm5120_buttons_data.nbuttons = 1;
- adm5120_buttons[0].desc = "reset button";
- adm5120_buttons[0].gpio = ADM5120_GPIO_PIN7;
-
- rb1xx_flash_setup();
- rb1xx_mac_setup();
-}
-
-static void __init rb150_setup(void)
-{
- /* setup GPIO pins for NAND flash chip */
- gpio_request(RB150_GPIO_NAND_READY, "nand-ready");
- gpio_direction_input(RB150_GPIO_NAND_READY);
- gpio_request(RB150_GPIO_NAND_NCE, "nand-nce");
- gpio_direction_output(RB150_GPIO_NAND_NCE, 1);
- gpio_request(RB150_GPIO_NAND_CLE, "nand-cle");
- gpio_direction_output(RB150_GPIO_NAND_CLE, 0);
- gpio_request(RB150_GPIO_NAND_ALE, "nand-ale");
- gpio_direction_output(RB150_GPIO_NAND_ALE, 0);
-
- adm5120_nand_device.num_resources = ARRAY_SIZE(rb150_nand_resource);
- adm5120_nand_device.resource = rb150_nand_resource;
- adm5120_nand_data.ctrl.cmd_ctrl = rb150_nand_cmd_ctrl;
- adm5120_nand_data.ctrl.dev_ready = rb150_nand_ready;
-
- adm5120_buttons_data.nbuttons = 1;
- adm5120_buttons[0].desc = "reset button";
- adm5120_buttons[0].gpio = ADM5120_GPIO_PIN1; /* FIXME: valid? */
-
- adm5120_gpiodev_resource.start &= ~RB150_GPIO_DEV_MASK;
-
- adm5120_flash0_data.window_size = 512*1024;
-
- rb1xx_flash_setup();
- rb1xx_mac_setup();
-}
-
-static void __init rb153_setup(void)
-{
- /* enable CSX1:INTX1 on GPIO[3:4] for the CF slot */
- adm5120_gpio_csx1_enable();
- /* enable the wait state pin GPIO[0] for external I/O control */
- adm5120_gpio_ew_enable();
-
- rb1xx_setup();
-
- adm5120_gpiodev_resource.start &= ~RB153_GPIO_DEV_MASK;
-}
-
-/*--------------------------------------------------------------------------*/
-
-ADM5120_BOARD_START(RB_111, "Mikrotik RouterBOARD 111")
- .board_setup = rb1xx_setup,
- .eth_num_ports = 1,
- .eth_vlans = rb11x_vlans,
- .num_devices = ARRAY_SIZE(rb1xx_devices),
- .devices = rb1xx_devices,
- .pci_nr_irqs = ARRAY_SIZE(rb1xx_pci_irqs),
- .pci_irq_map = rb1xx_pci_irqs,
-ADM5120_BOARD_END
-
-ADM5120_BOARD_START(RB_112, "Mikrotik RouterBOARD 112")
- .board_setup = rb1xx_setup,
- .eth_num_ports = 1,
- .eth_vlans = rb11x_vlans,
- .num_devices = ARRAY_SIZE(rb1xx_devices),
- .devices = rb1xx_devices,
- .pci_nr_irqs = ARRAY_SIZE(rb1xx_pci_irqs),
- .pci_irq_map = rb1xx_pci_irqs,
-ADM5120_BOARD_END
-
-ADM5120_BOARD_START(RB_133, "Mikrotik RouterBOARD 133")
- .board_setup = rb1xx_setup,
- .eth_num_ports = 3,
- .eth_vlans = rb133_vlans,
- .num_devices = ARRAY_SIZE(rb1xx_devices),
- .devices = rb1xx_devices,
- .pci_nr_irqs = ARRAY_SIZE(rb1xx_pci_irqs),
- .pci_irq_map = rb1xx_pci_irqs,
-ADM5120_BOARD_END
-
-ADM5120_BOARD_START(RB_133C, "Mikrotik RouterBOARD 133C")
- .board_setup = rb1xx_setup,
- .eth_num_ports = 1,
- .eth_vlans = rb133c_vlans,
- .num_devices = ARRAY_SIZE(rb1xx_devices),
- .devices = rb1xx_devices,
- .pci_nr_irqs = ARRAY_SIZE(rb1xx_pci_irqs),
- .pci_irq_map = rb1xx_pci_irqs,
-ADM5120_BOARD_END
-
-ADM5120_BOARD_START(RB_150, "Mikrotik RouterBOARD 150")
- .board_setup = rb150_setup,
- .eth_num_ports = 5,
- .eth_vlans = rb15x_vlans,
- .num_devices = ARRAY_SIZE(rb1xx_devices),
- .devices = rb1xx_devices,
-ADM5120_BOARD_END
-
-ADM5120_BOARD_START(RB_153, "Mikrotik RouterBOARD 153")
- .board_setup = rb153_setup,
- .eth_num_ports = 5,
- .eth_vlans = rb15x_vlans,
- .num_devices = ARRAY_SIZE(rb153_devices),
- .devices = rb153_devices,
- .pci_nr_irqs = ARRAY_SIZE(rb1xx_pci_irqs),
- .pci_irq_map = rb1xx_pci_irqs,
-ADM5120_BOARD_END
-
-ADM5120_BOARD_START(RB_192, "Mikrotik RouterBOARD 192")
- .board_setup = rb1xx_setup,
- .eth_num_ports = 5,
- .eth_vlans = rb192_vlans,
- .num_devices = ARRAY_SIZE(rb1xx_devices),
- .devices = rb1xx_devices,
- .pci_nr_irqs = ARRAY_SIZE(rb1xx_pci_irqs),
- .pci_irq_map = rb1xx_pci_irqs,
-ADM5120_BOARD_END
diff --git a/target/linux/adm5120/files/arch/mips/adm5120/boards/zyxel.c b/target/linux/adm5120/files/arch/mips/adm5120/boards/zyxel.c
deleted file mode 100644
index 717c0733ab..0000000000
--- a/target/linux/adm5120/files/arch/mips/adm5120/boards/zyxel.c
+++ /dev/null
@@ -1,115 +0,0 @@
-/*
- * $Id$
- *
- * ZyXEL Prestige P-334/P-335 boards
- *
- * Copyright (C) 2007 OpenWrt.org
- * Copyright (C) 2007 Gabor Juhos <juhosg at openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-
-#include <asm/bootinfo.h>
-#include <asm/gpio.h>
-
-#include <adm5120_board.h>
-#include <adm5120_platform.h>
-#include <adm5120_irq.h>
-
-#define P33X_GPIO_DEV_MASK (1 << ADM5120_GPIO_PIN5)
-
-static void switch_bank_gpio5(unsigned bank)
-{
- switch (bank) {
- case 0:
- gpio_set_value(ADM5120_GPIO_PIN5, 0);
- break;
- case 1:
- gpio_set_value(ADM5120_GPIO_PIN5, 1);
- break;
- }
-}
-
-static struct adm5120_pci_irq p33x_pci_irqs[] __initdata = {
- PCIIRQ(2, 0, 1, ADM5120_IRQ_PCI0),
-};
-
-static struct mtd_partition p33x_partitions[] = {
- {
- .name = "bootbase",
- .offset = 0,
- .size = 16*1024,
- .mask_flags = MTD_WRITEABLE,
- } , {
- .name = "rom",
- .offset = MTDPART_OFS_APPEND,
- .size = 16*1024,
- } , {
- .name = "bootext",
- .offset = MTDPART_OFS_APPEND,
- .size = 96*1024,
- .mask_flags = MTD_WRITEABLE,
- } , {
- .name = "trx",
- .offset = MTDPART_OFS_APPEND,
- .size = MTDPART_SIZ_FULL,
- } , {
- .name = "firmware",
- .offset = 32*1024,
- .size = MTDPART_SIZ_FULL,
- }
-};
-
-static struct platform_device *p334_devices[] __initdata = {
- &adm5120_flash0_device,
-};
-
-static struct platform_device *p335_devices[] __initdata = {
- &adm5120_flash0_device,
- &adm5120_hcd_device,
-};
-
-static void __init p33x_setup(void)
-{
- gpio_request(ADM5120_GPIO_PIN5, NULL); /* for flash A20 line */
- gpio_direction_output(ADM5120_GPIO_PIN5, 0);
-
- /* setup data for flash0 device */
- adm5120_flash0_data.switch_bank = switch_bank_gpio5;
- adm5120_flash0_data.nr_parts = ARRAY_SIZE(p33x_partitions);
- adm5120_flash0_data.parts = p33x_partitions;
-
- adm5120_gpiodev_resource.start &= ~P33X_GPIO_DEV_MASK;
- /* TODO: setup mac address */
-}
-
-unsigned char p33x_vlans[6] __initdata = {
- /* FIXME: untested */
- 0x50, 0x48, 0x44, 0x42, 0x41, 0x00
-};
-
-ADM5120_BOARD_START(P334WT, "ZyXEL Prestige 334WT")
- .board_setup = p33x_setup,
- .eth_num_ports = 5,
- .eth_vlans = p33x_vlans,
- .num_devices = ARRAY_SIZE(p334_devices),
- .devices = p334_devices,
- .pci_nr_irqs = ARRAY_SIZE(p33x_pci_irqs),
- .pci_irq_map = p33x_pci_irqs,
-ADM5120_BOARD_END
-
-ADM5120_BOARD_START(P335, "ZyXEL Prestige 335/335WT")
- .board_setup = p33x_setup,
- .eth_num_ports = 5,
- .eth_vlans = p33x_vlans,
- .num_devices = ARRAY_SIZE(p335_devices),
- .devices = p335_devices,
- .pci_nr_irqs = ARRAY_SIZE(p33x_pci_irqs),
- .pci_irq_map = p33x_pci_irqs,
-ADM5120_BOARD_END
diff --git a/target/linux/adm5120/files/arch/mips/adm5120/clock.c b/target/linux/adm5120/files/arch/mips/adm5120/clock.c
deleted file mode 100644
index bc5bf37dff..0000000000
--- a/target/linux/adm5120/files/arch/mips/adm5120/clock.c
+++ /dev/null
@@ -1,65 +0,0 @@
-/*
- * $Id$
- *
- * ADM5120 minimal CLK API implementation
- *
- * Copyright (C) 2007 OpenWrt.org
- * Copyright (C) 2007 Gabor Juhos <juhosg at openwrt.org>
- *
- * This file was based on the CLK API implementation in:
- * arch/mips/tx4938/toshiba_rbtx4938/setup.c
- * Copyright (C) 2000-2001 Toshiba Corporation
- * 2003-2005 (c) MontaVista Software, Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/string.h>
-#include <linux/module.h>
-#include <linux/err.h>
-#include <linux/clk.h>
-
-#include <adm5120_defs.h>
-
-struct clk {
- unsigned long rate;
-};
-
-static struct clk uart_clk = {
- .rate = ADM5120_UART_CLOCK
-};
-
-struct clk *clk_get(struct device *dev, const char *id)
-{
- if (!strcmp(id, "UARTCLK"))
- return &uart_clk;
-
- return ERR_PTR(-ENOENT);
-}
-EXPORT_SYMBOL(clk_get);
-
-int clk_enable(struct clk *clk)
-{
- return 0;
-}
-EXPORT_SYMBOL(clk_enable);
-
-void clk_disable(struct clk *clk)
-{
-}
-EXPORT_SYMBOL(clk_disable);
-
-unsigned long clk_get_rate(struct clk *clk)
-{
- return clk->rate;
-}
-EXPORT_SYMBOL(clk_get_rate);
-
-void clk_put(struct clk *clk)
-{
-}
-EXPORT_SYMBOL(clk_put);
diff --git a/target/linux/adm5120/files/arch/mips/adm5120/gpio.c b/target/linux/adm5120/files/arch/mips/adm5120/gpio.c
deleted file mode 100644
index 0cb446e8df..0000000000
--- a/target/linux/adm5120/files/arch/mips/adm5120/gpio.c
+++ /dev/null
@@ -1,375 +0,0 @@
-/*
- * $Id$
- *
- * ADM5120 GPIO support
- *
- * Copyright (C) 2007-2008 OpenWrt.org
- * Copyright (C) 2007-2008 Gabor Juhos <juhosg at openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- *
- */
-
-#include <linux/autoconf.h>
-#include <linux/init.h>
-#include <linux/types.h>
-#include <linux/module.h>
-#include <linux/delay.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-
-#include <asm/addrspace.h>
-#include <asm/gpio.h>
-
-#include <adm5120_defs.h>
-#include <adm5120_info.h>
-#include <adm5120_switch.h>
-#include <adm5120_irq.h>
-
-#define GPIO_READ(r) __raw_readl((r))
-#define GPIO_WRITE(v, r) __raw_writel((v), (r))
-#define GPIO_REG(r) (void __iomem *)(KSEG1ADDR(ADM5120_SWITCH_BASE)+r)
-
-struct adm5120_gpio_line {
- u32 flags;
- const char *label;
- int irq;
-};
-
-#define GPIO_FLAG_VALID 0x01
-#define GPIO_FLAG_USED 0x02
-
-struct led_desc {
- void __iomem *reg; /* LED register address */
- u8 iv_shift; /* shift amount for input bit */
- u8 mode_shift; /* shift amount for mode bits */
-};
-
-#define LED_DESC(p, l) { \
- .reg = GPIO_REG(SWITCH_REG_PORT0_LED+((p) * 4)), \
- .iv_shift = LED0_IV_SHIFT + (l), \
- .mode_shift = (l) * 4 \
- }
-
-static struct led_desc led_table[15] = {
- LED_DESC(0, 0), LED_DESC(0, 1), LED_DESC(0, 2),
- LED_DESC(1, 0), LED_DESC(1, 1), LED_DESC(1, 2),
- LED_DESC(2, 0), LED_DESC(2, 1), LED_DESC(2, 2),
- LED_DESC(3, 0), LED_DESC(3, 1), LED_DESC(3, 2),
- LED_DESC(4, 0), LED_DESC(4, 1), LED_DESC(4, 2)
-};
-
-static struct adm5120_gpio_line adm5120_gpio_map[ADM5120_GPIO_COUNT];
-
-static u32 gpio_conf2;
-
-/*-------------------------------------------------------------------------*/
-
-static inline int gpio_is_invalid(unsigned gpio)
-{
- if ((gpio > ADM5120_GPIO_MAX) ||
- (adm5120_gpio_map[gpio].flags & GPIO_FLAG_VALID) == 0)
- return 1;
-
- return 0;
-}
-
-static inline int gpio_is_used(unsigned gpio)
-{
- return ((adm5120_gpio_map[gpio].flags & GPIO_FLAG_USED) != 0);
-}
-
-/*-------------------------------------------------------------------------*/
-
-/*
- * Helpers for GPIO lines in GPIO_CONF0 register
- */
-#define PIN_IM(p) ((1 << GPIO_CONF0_IM_SHIFT) << p)
-#define PIN_IV(p) ((1 << GPIO_CONF0_IV_SHIFT) << p)
-#define PIN_OE(p) ((1 << GPIO_CONF0_OE_SHIFT) << p)
-#define PIN_OV(p) ((1 << GPIO_CONF0_OV_SHIFT) << p)
-
-static inline int pins_direction_input(unsigned pin)
-{
- void __iomem **reg;
- u32 t;
-
- reg = GPIO_REG(SWITCH_REG_GPIO_CONF0);
-
- t = GPIO_READ(reg);
- t &= ~(PIN_OE(pin));
- t |= PIN_IM(pin);
- GPIO_WRITE(t, reg);
-
- return 0;
-}
-
-static inline int pins_direction_output(unsigned pin, int value)
-{
- void __iomem **reg;
- u32 t;
-
- reg = GPIO_REG(SWITCH_REG_GPIO_CONF0);
-
- t = GPIO_READ(reg);
- t &= ~(PIN_IM(pin) | PIN_OV(pin));
- t |= PIN_OE(pin);
-
- if (value)
- t |= PIN_OV(pin);
-
- GPIO_WRITE(t, reg);
-
- return 0;
-}
-
-static inline int pins_get_value(unsigned pin)
-{
- void __iomem **reg;
- u32 t;
-
- reg = GPIO_REG(SWITCH_REG_GPIO_CONF0);
-
- t = GPIO_READ(reg);
- if ((t & PIN_IM(pin)) != 0)
- t &= PIN_IV(pin);
- else
- t &= PIN_OV(pin);
-
- return (t) ? 1 : 0;
-}
-
-static inline void pins_set_value(unsigned pin, int value)
-{
- void __iomem **reg;
- u32 t;
-
- reg = GPIO_REG(SWITCH_REG_GPIO_CONF0);
-
- t = GPIO_READ(reg);
- if (value == 0)
- t &= ~(PIN_OV(pin));
- else
- t |= PIN_OV(pin);
-
- GPIO_WRITE(t, reg);
-}
-
-/*
- * Helpers for GPIO lines in PORTx_LED registers
- */
-static inline int leds_direction_input(unsigned led)
-{
- void __iomem **reg;
- u32 t;
-
- reg = led_table[led].reg;
- t = GPIO_READ(reg);
- t &= ~(LED_MODE_MASK << led_table[led].mode_shift);
- GPIO_WRITE(t, reg);
-
- return 0;
-}
-
-static inline int leds_direction_output(unsigned led, int value)
-{
- void __iomem **reg;
- u32 t, s;
-
- reg = led_table[led].reg;
- s = led_table[led].mode_shift;
-
- t = GPIO_READ(reg);
- t &= ~(LED_MODE_MASK << s);
-
- switch (value) {
- case ADM5120_GPIO_LOW:
- t |= (LED_MODE_OUT_LOW << s);
- break;
- case ADM5120_GPIO_FLASH:
- case ADM5120_GPIO_LINK:
- case ADM5120_GPIO_SPEED:
- case ADM5120_GPIO_DUPLEX:
- case ADM5120_GPIO_ACT:
- case ADM5120_GPIO_COLL:
- case ADM5120_GPIO_LINK_ACT:
- case ADM5120_GPIO_DUPLEX_COLL:
- case ADM5120_GPIO_10M_ACT:
- case ADM5120_GPIO_100M_ACT:
- t |= ((value & LED_MODE_MASK) << s);
- break;
- default:
- t |= (LED_MODE_OUT_HIGH << s);
- break;
- }
-
- GPIO_WRITE(t, reg);
-
- return 0;
-}
-
-static inline int leds_get_value(unsigned led)
-{
- void __iomem **reg;
- u32 t, m;
-
- reg = led_table[led].reg;
-
- t = GPIO_READ(reg);
- m = (t >> led_table[led].mode_shift) & LED_MODE_MASK;
- if (m == LED_MODE_INPUT)
- return (t >> led_table[led].iv_shift) & 1;
-
- if (m == LED_MODE_OUT_LOW)
- return 0;
-
- return 1;
-}
-
-/*-------------------------------------------------------------------------*/
-
-/*
- * Main GPIO support routines
- */
-int adm5120_gpio_direction_input(unsigned gpio)
-{
- if (gpio_is_invalid(gpio))
- return -EINVAL;
-
- if (gpio < ADM5120_GPIO_P0L0)
- return pins_direction_input(gpio);
-
- gpio -= ADM5120_GPIO_P0L0;
- return leds_direction_input(gpio);
-}
-EXPORT_SYMBOL(adm5120_gpio_direction_input);
-
-int adm5120_gpio_direction_output(unsigned gpio, int value)
-{
- if (gpio_is_invalid(gpio))
- return -EINVAL;
-
- if (gpio < ADM5120_GPIO_P0L0)
- return pins_direction_output(gpio, value);
-
- gpio -= ADM5120_GPIO_P0L0;
- return leds_direction_output(gpio, value);
-}
-EXPORT_SYMBOL(adm5120_gpio_direction_output);
-
-int adm5120_gpio_get_value(unsigned gpio)
-{
- if (gpio < ADM5120_GPIO_P0L0)
- return pins_get_value(gpio);
-
- gpio -= ADM5120_GPIO_P0L0;
- return leds_get_value(gpio);
-}
-EXPORT_SYMBOL(adm5120_gpio_get_value);
-
-void adm5120_gpio_set_value(unsigned gpio, int value)
-{
- if (gpio < ADM5120_GPIO_P0L0) {
- pins_set_value(gpio, value);
- return;
- }
-
- gpio -= ADM5120_GPIO_P0L0;
- leds_direction_output(gpio, value);
-}
-EXPORT_SYMBOL(adm5120_gpio_set_value);
-
-int adm5120_gpio_request(unsigned gpio, const char *label)
-{
- if (gpio_is_invalid(gpio))
- return -EINVAL;
-
- if (gpio_is_used(gpio))
- return -EBUSY;
-
- adm5120_gpio_map[gpio].flags |= GPIO_FLAG_USED;
- adm5120_gpio_map[gpio].label = label;
-
- return 0;
-}
-EXPORT_SYMBOL(adm5120_gpio_request);
-
-void adm5120_gpio_free(unsigned gpio)
-{
- if (gpio_is_invalid(gpio))
- return;
-
- adm5120_gpio_map[gpio].flags &= ~GPIO_FLAG_USED;
- adm5120_gpio_map[gpio].label = NULL;
-}
-EXPORT_SYMBOL(adm5120_gpio_free);
-
-int adm5120_gpio_to_irq(unsigned gpio)
-{
- if (gpio > ADM5120_GPIO_MAX)
- return -EINVAL;
-
- return adm5120_gpio_map[gpio].irq;
-}
-EXPORT_SYMBOL(adm5120_gpio_to_irq);
-
-int adm5120_irq_to_gpio(unsigned irq)
-{
- int i;
-
- for (i = 0; i < ADM5120_GPIO_COUNT; i++)
- if (adm5120_gpio_map[i].irq == irq)
- return i;
-
- return -EINVAL;
-}
-EXPORT_SYMBOL(adm5120_irq_to_gpio);
-
-/*-------------------------------------------------------------------------*/
-
-void __init adm5120_gpio_csx0_enable(void)
-{
- gpio_conf2 |= GPIO_CONF2_CSX0;
- SW_WRITE_REG(SWITCH_REG_GPIO_CONF2, gpio_conf2);
-
- adm5120_gpio_map[ADM5120_GPIO_PIN1].flags &= ~GPIO_FLAG_VALID;
- adm5120_gpio_map[ADM5120_GPIO_PIN2].irq = ADM5120_IRQ_GPIO2;
-}
-
-void __init adm5120_gpio_csx1_enable(void)
-{
- gpio_conf2 |= GPIO_CONF2_CSX1;
- SW_WRITE_REG(SWITCH_REG_GPIO_CONF2, gpio_conf2);
-
- adm5120_gpio_map[ADM5120_GPIO_PIN3].flags &= ~GPIO_FLAG_VALID;
- if (adm5120_package_bga())
- adm5120_gpio_map[ADM5120_GPIO_PIN4].irq = ADM5120_IRQ_GPIO4;
-}
-
-void __init adm5120_gpio_ew_enable(void)
-{
- gpio_conf2 |= GPIO_CONF2_EW;
- SW_WRITE_REG(SWITCH_REG_GPIO_CONF2, gpio_conf2);
-
- adm5120_gpio_map[ADM5120_GPIO_PIN0].flags &= ~GPIO_FLAG_VALID;
-}
-
-void __init adm5120_gpio_init(void)
-{
- int i;
-
- gpio_conf2 = 0;
- SW_WRITE_REG(SWITCH_REG_GPIO_CONF2, gpio_conf2);
-
- for (i = 0; i < ADM5120_GPIO_COUNT; i++)
- adm5120_gpio_map[i].flags = GPIO_FLAG_VALID;
-
- if (adm5120_package_pqfp()) {
- adm5120_gpio_map[ADM5120_GPIO_PIN4].flags &= ~GPIO_FLAG_VALID;
- adm5120_gpio_map[ADM5120_GPIO_PIN5].flags &= ~GPIO_FLAG_VALID;
- adm5120_gpio_map[ADM5120_GPIO_PIN6].flags &= ~GPIO_FLAG_VALID;
- adm5120_gpio_map[ADM5120_GPIO_PIN7].flags &= ~GPIO_FLAG_VALID;
- }
-}
diff --git a/target/linux/adm5120/files/arch/mips/adm5120/irq.c b/target/linux/adm5120/files/arch/mips/adm5120/irq.c
deleted file mode 100644
index ed9acb0204..0000000000
--- a/target/linux/adm5120/files/arch/mips/adm5120/irq.c
+++ /dev/null
@@ -1,181 +0,0 @@
-/*
- * ADM5120 specific interrupt handlers
- *
- * Copyright (C) 2007-2008 OpenWrt.org
- * Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- *
- */
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/version.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/io.h>
-
-#include <asm/irq.h>
-#include <asm/irq_cpu.h>
-#include <asm/mipsregs.h>
-#include <asm/bitops.h>
-
-#include <asm/mach-adm5120/adm5120_defs.h>
-#include <asm/mach-adm5120/adm5120_irq.h>
-
-static void adm5120_intc_irq_unmask(unsigned int irq);
-static void adm5120_intc_irq_mask(unsigned int irq);
-static int adm5120_intc_irq_set_type(unsigned int irq, unsigned int flow_type);
-
-static inline void intc_write_reg(unsigned int reg, u32 val)
-{
- void __iomem *base = (void __iomem *)KSEG1ADDR(ADM5120_INTC_BASE);
-
- __raw_writel(val, base + reg);
-}
-
-static inline u32 intc_read_reg(unsigned int reg)
-{
- void __iomem *base = (void __iomem *)KSEG1ADDR(ADM5120_INTC_BASE);
-
- return __raw_readl(base + reg);
-}
-
-static struct irq_chip adm5120_intc_irq_chip = {
- .name = "INTC",
- .unmask = adm5120_intc_irq_unmask,
- .mask = adm5120_intc_irq_mask,
- .mask_ack = adm5120_intc_irq_mask,
- .set_type = adm5120_intc_irq_set_type
-};
-
-static struct irqaction adm5120_intc_irq_action = {
- .handler = no_action,
- .name = "cascade [INTC]"
-};
-
-static void adm5120_intc_irq_unmask(unsigned int irq)
-{
- irq -= ADM5120_INTC_IRQ_BASE;
- intc_write_reg(INTC_REG_IRQ_ENABLE, 1 << irq);
-}
-
-static void adm5120_intc_irq_mask(unsigned int irq)
-{
- irq -= ADM5120_INTC_IRQ_BASE;
- intc_write_reg(INTC_REG_IRQ_DISABLE, 1 << irq);
-}
-
-static int adm5120_intc_irq_set_type(unsigned int irq, unsigned int flow_type)
-{
- unsigned int sense;
- unsigned long mode;
- int err = 0;
-
- sense = flow_type & (IRQ_TYPE_SENSE_MASK);
- switch (sense) {
- case IRQ_TYPE_NONE:
- case IRQ_TYPE_LEVEL_HIGH:
- break;
- case IRQ_TYPE_LEVEL_LOW:
- switch (irq) {
- case ADM5120_IRQ_GPIO2:
- case ADM5120_IRQ_GPIO4:
- break;
- default:
- err = -EINVAL;
- break;
- }
- break;
- default:
- err = -EINVAL;
- break;
- }
-
- if (err)
- return err;
-
- switch (irq) {
- case ADM5120_IRQ_GPIO2:
- case ADM5120_IRQ_GPIO4:
- mode = intc_read_reg(INTC_REG_INT_MODE);
- if (sense == IRQ_TYPE_LEVEL_LOW)
- mode |= (1 << (irq - ADM5120_INTC_IRQ_BASE));
- else
- mode &= ~(1 << (irq - ADM5120_INTC_IRQ_BASE));
-
- intc_write_reg(INTC_REG_INT_MODE, mode);
- /* fallthrough */
- default:
- irq_desc[irq].status &= ~IRQ_TYPE_SENSE_MASK;
- irq_desc[irq].status |= sense;
- break;
- }
-
- return 0;
-}
-
-static void adm5120_intc_irq_dispatch(void)
-{
- unsigned long status;
- int irq;
-
- /* dispatch only one IRQ at a time */
- status = intc_read_reg(INTC_REG_IRQ_STATUS) & INTC_INT_ALL;
-
- if (status) {
- irq = ADM5120_INTC_IRQ_BASE + fls(status) - 1;
- do_IRQ(irq);
- } else
- spurious_interrupt();
-}
-
-asmlinkage void plat_irq_dispatch(void)
-{
- unsigned long pending;
-
- pending = read_c0_status() & read_c0_cause() & ST0_IM;
-
- if (pending & STATUSF_IP7)
- do_IRQ(ADM5120_IRQ_COUNTER);
- else if (pending & STATUSF_IP2)
- adm5120_intc_irq_dispatch();
- else
- spurious_interrupt();
-}
-
-#define INTC_IRQ_STATUS (IRQ_LEVEL | IRQ_TYPE_LEVEL_HIGH | IRQ_DISABLED)
-
-static void __init adm5120_intc_irq_init(void)
-{
- int i;
-
- /* disable all interrupts */
- intc_write_reg(INTC_REG_IRQ_DISABLE, INTC_INT_ALL);
-
- /* setup all interrupts to generate IRQ instead of FIQ */
- intc_write_reg(INTC_REG_INT_MODE, 0);
-
- /* set active level for all external interrupts to HIGH */
- intc_write_reg(INTC_REG_INT_LEVEL, 0);
-
- /* disable usage of the TEST_SOURCE register */
- intc_write_reg(INTC_REG_IRQ_SOURCE_SELECT, 0);
-
- for (i = ADM5120_INTC_IRQ_BASE;
- i <= ADM5120_INTC_IRQ_BASE + INTC_IRQ_LAST;
- i++) {
- irq_desc[i].status = INTC_IRQ_STATUS;
- set_irq_chip_and_handler(i, &adm5120_intc_irq_chip,
- handle_level_irq);
- }
-
- setup_irq(ADM5120_IRQ_INTC, &adm5120_intc_irq_action);
-}
-
-void __init arch_init_irq(void) {
- mips_cpu_irq_init();
- adm5120_intc_irq_init();
-}
diff --git a/target/linux/adm5120/files/arch/mips/adm5120/memory.c b/target/linux/adm5120/files/arch/mips/adm5120/memory.c
deleted file mode 100644
index 50c87dd42f..0000000000
--- a/target/linux/adm5120/files/arch/mips/adm5120/memory.c
+++ /dev/null
@@ -1,152 +0,0 @@
-/*
- * $Id$
- *
- * Copyright (C) 2007 OpenWrt.org
- * Copyright (C) 2007 Gabor Juhos <juhosg at openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- *
- */
-
-#include <linux/init.h>
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/io.h>
-
-#include <asm/bootinfo.h>
-#include <asm/addrspace.h>
-
-#include <adm5120_info.h>
-#include <adm5120_defs.h>
-#include <adm5120_switch.h>
-#include <adm5120_mpmc.h>
-
-#ifdef DEBUG
-# define mem_dbg(f, a...) printk(KERN_INFO "mem_detect: " f, ## a)
-#else
-# define mem_dbg(f, a...)
-#endif
-
-unsigned long adm5120_memsize;
-
-#define MEM_READL(a) __raw_readl((void __iomem *)(a))
-#define MEM_WRITEL(a, v) __raw_writel((v), (void __iomem *)(a))
-
-static int __init mem_check_pattern(u8 *addr, unsigned long offs)
-{
- u32 *p1 = (u32 *)addr;
- u32 *p2 = (u32 *)(addr+offs);
- u32 t, u, v;
-
- /* save original value */
- t = MEM_READL(p1);
-
- u = MEM_READL(p2);
- if (t != u)
- return 0;
-
- v = 0x55555555;
- if (u == v)
- v = 0xAAAAAAAA;
-
- mem_dbg("write 0x%08X to 0x%08lX\n", v, (unsigned long)p1);
-
- MEM_WRITEL(p1, v);
- adm5120_ndelay(1000);
- u = MEM_READL(p2);
-
- mem_dbg("pattern at 0x%08lX is 0x%08X\n", (unsigned long)p2, u);
-
- /* restore original value */
- MEM_WRITEL(p1, t);
-
- return (v == u);
-}
-
-static void __init adm5120_detect_memsize(void)
-{
- u32 memctrl;
- u32 size, maxsize;
- u8 *p;
-
- memctrl = SW_READ_REG(SWITCH_REG_MEMCTRL);
- switch (memctrl & MEMCTRL_SDRS_MASK) {
- case MEMCTRL_SDRS_4M:
- maxsize = 4 << 20;
- break;
- case MEMCTRL_SDRS_8M:
- maxsize = 8 << 20;
- break;
- case MEMCTRL_SDRS_16M:
- maxsize = 16 << 20;
- break;
- default:
- maxsize = 64 << 20;
- break;
- }
-
- mem_dbg("checking for %uMB chip in 1st bank\n", maxsize >> 20);
-
- /* detect size of the 1st SDRAM bank */
- p = (u8 *)KSEG1ADDR(0);
- for (size = 2<<20; size <= (maxsize >> 1); size <<= 1) {
- if (mem_check_pattern(p, size)) {
- /* mirrored address */
- mem_dbg("mirrored data found at offset 0x%08X\n", size);
- break;
- }
- }
-
- mem_dbg("chip size in 1st bank is %uMB\n", size >> 20);
- adm5120_memsize = size;
-
- if (size != maxsize)
- /* 2nd bank is not supported */
- goto out;
-
- if ((memctrl & MEMCTRL_SDR1_ENABLE) == 0)
- /* 2nd bank is disabled */
- goto out;
-
- /*
- * some bootloaders enable 2nd bank, even if the 2nd SDRAM chip
- * are missing.
- */
- mem_dbg("check presence of 2nd bank\n");
-
- p = (u8 *)KSEG1ADDR(maxsize+size-4);
- if (mem_check_pattern(p, 0))
- adm5120_memsize += size;
-
- if (maxsize != size) {
- /* adjusting MECTRL register */
- memctrl &= ~(MEMCTRL_SDRS_MASK);
- switch (size>>20) {
- case 4:
- memctrl |= MEMCTRL_SDRS_4M;
- break;
- case 8:
- memctrl |= MEMCTRL_SDRS_8M;
- break;
- case 16:
- memctrl |= MEMCTRL_SDRS_16M;
- break;
- default:
- memctrl |= MEMCTRL_SDRS_64M;
- break;
- }
- SW_WRITE_REG(SWITCH_REG_MEMCTRL, memctrl);
- }
-
-out:
- mem_dbg("%dx%uMB memory found\n", (adm5120_memsize == size) ? 1 : 2 ,
- size>>20);
-}
-
-void __init adm5120_mem_init(void)
-{
- adm5120_detect_memsize();
- add_memory_region(0, adm5120_memsize, BOOT_MEM_RAM);
-}
diff --git a/target/linux/adm5120/files/arch/mips/adm5120/platform.c b/target/linux/adm5120/files/arch/mips/adm5120/platform.c
deleted file mode 100644
index 26de8f0c63..0000000000
--- a/target/linux/adm5120/files/arch/mips/adm5120/platform.c
+++ /dev/null
@@ -1,252 +0,0 @@
-/*
- * $Id$
- *
- * Generic ADM5120 platform devices
- *
- * Copyright (C) 2007-2008 OpenWrt.org
- * Copyright (C) 2007-2008 Gabor Juhos <juhosg at openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- *
- */
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/list.h>
-#include <linux/device.h>
-#include <linux/dma-mapping.h>
-#include <linux/platform_device.h>
-
-#include <asm/bootinfo.h>
-#include <asm/gpio.h>
-
-#include <adm5120_defs.h>
-#include <adm5120_info.h>
-#include <adm5120_irq.h>
-#include <adm5120_switch.h>
-#include <adm5120_nand.h>
-#include <adm5120_platform.h>
-
-#if 1
-/*
- * TODO:remove global adm5120_eth* variables when the switch driver will be
- * converted into a real platform driver
- */
-unsigned int adm5120_eth_num_ports = 6;
-EXPORT_SYMBOL_GPL(adm5120_eth_num_ports);
-
-unsigned char adm5120_eth_macs[6][6] = {
- {'\00', 'A', 'D', 'M', '\x51', '\x20' },
- {'\00', 'A', 'D', 'M', '\x51', '\x21' },
- {'\00', 'A', 'D', 'M', '\x51', '\x22' },
- {'\00', 'A', 'D', 'M', '\x51', '\x23' },
- {'\00', 'A', 'D', 'M', '\x51', '\x24' },
- {'\00', 'A', 'D', 'M', '\x51', '\x25' }
-};
-EXPORT_SYMBOL_GPL(adm5120_eth_macs);
-
-unsigned char adm5120_eth_vlans[6] = {
- 0x41, 0x42, 0x44, 0x48, 0x50, 0x60
-};
-EXPORT_SYMBOL_GPL(adm5120_eth_vlans);
-#endif
-
-/* Built-in ethernet switch */
-struct resource adm5120_switch_resources[] = {
- [0] = {
- .start = ADM5120_SWITCH_BASE,
- .end = ADM5120_SWITCH_BASE+ADM5120_SWITCH_SIZE-1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = ADM5120_IRQ_SWITCH,
- .end = ADM5120_IRQ_SWITCH,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-struct adm5120_switch_platform_data adm5120_switch_data;
-struct platform_device adm5120_switch_device = {
- .name = "adm5120-switch",
- .id = -1,
- .num_resources = ARRAY_SIZE(adm5120_switch_resources),
- .resource = adm5120_switch_resources,
- .dev.platform_data = &adm5120_switch_data,
-};
-
-/* USB Host Controller */
-struct resource adm5120_hcd_resources[] = {
- [0] = {
- .start = ADM5120_USBC_BASE,
- .end = ADM5120_USBC_BASE+ADM5120_USBC_SIZE-1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = ADM5120_IRQ_USBC,
- .end = ADM5120_IRQ_USBC,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static u64 adm5120_hcd_dma_mask = DMA_BIT_MASK(24);
-struct platform_device adm5120_hcd_device = {
- .name = "adm5120-hcd",
- .id = -1,
- .num_resources = ARRAY_SIZE(adm5120_hcd_resources),
- .resource = adm5120_hcd_resources,
- .dev = {
- .dma_mask = &adm5120_hcd_dma_mask,
- .coherent_dma_mask = DMA_BIT_MASK(24),
- }
-};
-
-/* NOR flash 0 */
-struct adm5120_flash_platform_data adm5120_flash0_data;
-struct platform_device adm5120_flash0_device = {
- .name = "adm5120-flash",
- .id = 0,
- .dev.platform_data = &adm5120_flash0_data,
-};
-
-/* NOR flash 1 */
-struct adm5120_flash_platform_data adm5120_flash1_data;
-struct platform_device adm5120_flash1_device = {
- .name = "adm5120-flash",
- .id = 1,
- .dev.platform_data = &adm5120_flash1_data,
-};
-
-/* NAND flash */
-struct resource adm5120_nand_resource[] = {
- [0] = {
- .start = ADM5120_NAND_BASE,
- .end = ADM5120_NAND_BASE + ADM5120_NAND_SIZE-1,
- .flags = IORESOURCE_MEM,
- },
-};
-
-struct platform_nand_data adm5120_nand_data = {
- .ctrl.dev_ready = adm5120_nand_ready,
- .ctrl.cmd_ctrl = adm5120_nand_cmd_ctrl,
-};
-
-struct platform_device adm5120_nand_device = {
- .name = "gen_nand",
- .id = -1,
- .num_resources = ARRAY_SIZE(adm5120_nand_resource),
- .resource = adm5120_nand_resource,
- .dev.platform_data = &adm5120_nand_data,
-};
-
-/* built-in UARTs */
-struct amba_pl010_data adm5120_uart0_data = {
- .set_mctrl = adm5120_uart_set_mctrl
-};
-
-struct amba_device adm5120_uart0_device = {
- .dev = {
- .bus_id = "APB:UART0",
- .platform_data = &adm5120_uart0_data,
- },
- .res = {
- .start = ADM5120_UART0_BASE,
- .end = ADM5120_UART0_BASE + ADM5120_UART_SIZE - 1,
- .flags = IORESOURCE_MEM,
- },
- .irq = { ADM5120_IRQ_UART0, -1 },
- .periphid = 0x0041010,
-};
-
-struct amba_pl010_data adm5120_uart1_data = {
- .set_mctrl = adm5120_uart_set_mctrl
-};
-
-struct amba_device adm5120_uart1_device = {
- .dev = {
- .bus_id = "APB:UART1",
- .platform_data = &adm5120_uart1_data,
- },
- .res = {
- .start = ADM5120_UART1_BASE,
- .end = ADM5120_UART1_BASE + ADM5120_UART_SIZE - 1,
- .flags = IORESOURCE_MEM,
- },
- .irq = { ADM5120_IRQ_UART1, -1 },
- .periphid = 0x0041010,
-};
-
-#define ADM5120_BUTTON_THRESHOLD 5
-#define ADM5120_BUTTON_INTERVAL 20
-
-struct gpio_button adm5120_buttons[ADM5120_NUM_BUTTONS] = {
- {
- .type = EV_KEY,
- .code = BTN_0,
- .threshold = ADM5120_BUTTON_THRESHOLD,
- }, {
- .type = EV_KEY,
- .code = BTN_1,
- .threshold = ADM5120_BUTTON_THRESHOLD,
- }, {
- .type = EV_KEY,
- .code = BTN_2,
- .threshold = ADM5120_BUTTON_THRESHOLD,
- }, {
- .type = EV_KEY,
- .code = BTN_3,
- .threshold = ADM5120_BUTTON_THRESHOLD,
- }, {
- .type = EV_KEY,
- .code = BTN_4,
- .threshold = ADM5120_BUTTON_THRESHOLD,
- }
-};
-
-struct gpio_buttons_platform_data adm5120_buttons_data = {
- .poll_interval = ADM5120_BUTTON_INTERVAL,
- .nbuttons = ARRAY_SIZE(adm5120_buttons),
- .buttons = adm5120_buttons,
-};
-
-struct platform_device adm5120_buttons_device = {
- .name = "gpio-buttons",
- .id = 0,
- .dev.platform_data = &adm5120_buttons_data,
-};
-
-/* GPIO char device */
-struct resource adm5120_gpiodev_resource = {
- .start = 0x3fffff,
-};
-
-struct platform_device adm5120_gpiodev_device = {
- .name = "GPIODEV",
- .id = -1,
- .num_resources = 1,
- .resource = &adm5120_gpiodev_resource,
-};
-
-void adm5120_uart_set_mctrl(struct amba_device *dev, void __iomem *base,
- unsigned int mctrl)
-{
-}
-
-int adm5120_nand_ready(struct mtd_info *mtd)
-{
- return ((adm5120_nand_get_status() & ADM5120_NAND_STATUS_READY) != 0);
-}
-
-void adm5120_nand_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
-{
- if (ctrl & NAND_CTRL_CHANGE) {
- adm5120_nand_set_cle(ctrl & NAND_CLE);
- adm5120_nand_set_ale(ctrl & NAND_ALE);
- adm5120_nand_set_cen(ctrl & NAND_NCE);
- }
-
- if (cmd != NAND_CMD_NONE)
- NAND_WRITE_REG(NAND_REG_DATA, cmd);
-}
-
diff --git a/target/linux/adm5120/files/arch/mips/adm5120/prom.c b/target/linux/adm5120/files/arch/mips/adm5120/prom.c
deleted file mode 100644
index 7d61490ca2..0000000000
--- a/target/linux/adm5120/files/arch/mips/adm5120/prom.c
+++ /dev/null
@@ -1,276 +0,0 @@
-/*
- * $Id$
- *
- * ADM5120 specific prom routines
- *
- * Copyright (C) 2007 OpenWrt.org
- * Copyright (C) 2007 Gabor Juhos <juhosg at openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- *
- */
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/string.h>
-#include <linux/mm.h>
-#include <linux/io.h>
-
-#include <asm/bootinfo.h>
-#include <asm/addrspace.h>
-
-#include <adm5120_info.h>
-#include <adm5120_defs.h>
-#include <adm5120_uart.h>
-
-#include <prom/cfe.h>
-#include <prom/generic.h>
-#include <prom/routerboot.h>
-#include <prom/myloader.h>
-#include <prom/zynos.h>
-
-unsigned int adm5120_prom_type = ADM5120_PROM_GENERIC;
-
-struct board_desc {
- unsigned long mach_type;
- char *name;
-};
-
-#define DEFBOARD(n, mt) { .mach_type = (mt), .name = (n)}
-static struct board_desc common_boards[] __initdata = {
- /* Cellvision/SparkLAN boards */
- DEFBOARD("CAS-630", MACH_ADM5120_CAS630),
- DEFBOARD("CAS-670", MACH_ADM5120_CAS670),
- DEFBOARD("CAS-700", MACH_ADM5120_CAS700),
- DEFBOARD("CAS-771", MACH_ADM5120_CAS771),
- DEFBOARD("CAS-790", MACH_ADM5120_CAS790),
- DEFBOARD("CAS-861", MACH_ADM5120_CAS861),
- DEFBOARD("NFS-101U", MACH_ADM5120_NFS101U),
- /* Compex boards */
- DEFBOARD("WP54G-WRT", MACH_ADM5120_WP54G_WRT),
- /* Edimax boards */
- DEFBOARD("BR-6104K", MACH_ADM5120_BR6104K),
- DEFBOARD("BR-6104KP", MACH_ADM5120_BR6104K),
- DEFBOARD("BR-6104WG", MACH_ADM5120_BR61x4WG),
- DEFBOARD("BR-6114WG", MACH_ADM5120_BR61x4WG),
- /* Infineon boards */
- DEFBOARD("EASY 5120P-ATA", MACH_ADM5120_EASY5120PATA),
- DEFBOARD("EASY 5120-RT", MACH_ADM5120_EASY5120RT),
- DEFBOARD("EASY 5120-WVoIP", MACH_ADM5120_EASY5120WVOIP),
- DEFBOARD("EASY 83000", MACH_ADM5120_EASY83000),
- /* Mikrotik RouterBOARDs */
- DEFBOARD("111", MACH_ADM5120_RB_111),
- DEFBOARD("112", MACH_ADM5120_RB_112),
- DEFBOARD("133", MACH_ADM5120_RB_133),
- DEFBOARD("133C", MACH_ADM5120_RB_133C),
- DEFBOARD("133C3", MACH_ADM5120_RB_133C),
- DEFBOARD("150", MACH_ADM5120_RB_153), /* it's intentional */
- DEFBOARD("153", MACH_ADM5120_RB_153),
- DEFBOARD("192", MACH_ADM5120_RB_192),
- DEFBOARD("miniROUTER", MACH_ADM5120_RB_150),
-};
-
-static unsigned long __init find_machtype_byname(char *name)
-{
- unsigned long ret;
- int i;
-
- ret = MACH_ADM5120_GENERIC;
- if (name == NULL)
- goto out;
-
- if (*name == '\0')
- goto out;
-
- for (i = 0; i < ARRAY_SIZE(common_boards); i++) {
- if (strcmp(common_boards[i].name, name) == 0) {
- ret = common_boards[i].mach_type;
- break;
- }
- }
-
-out:
- return ret;
-}
-
-static unsigned long __init detect_machtype_routerboot(void)
-{
- char *name;
-
- name = routerboot_get_boardname();
- return find_machtype_byname(name);
-}
-
-static unsigned long __init detect_machtype_generic(void)
-{
- char *name;
-
- name = generic_prom_getenv("board_name");
- return find_machtype_byname(name);
-}
-
-unsigned long __init detect_machtype_cfe(void)
-{
- char *name;
-
- name = cfe_getenv("BOARD_NAME");
- return find_machtype_byname(name);
-}
-
-static struct {
- unsigned long mach_type;
- u16 vendor_id;
- u16 board_id;
-} zynos_boards[] __initdata = {
-#define ZYNOS_BOARD(vi, bi, mt) \
- {.vendor_id = (vi), .board_id = (bi), .mach_type = (mt)}
-
-#define ZYXEL_BOARD(bi, mt) ZYNOS_BOARD(ZYNOS_VENDOR_ID_ZYXEL, bi, mt)
-#define DLINK_BOARD(bi, mt) ZYNOS_BOARD(ZYNOS_VENDOR_ID_DLINK, bi, mt)
-#define LUCENT_BOARD(bi, mt) ZYNOS_BOARD(ZYNOS_VENDOR_ID_LUCENT, bi, mt)
- ZYXEL_BOARD(ZYNOS_BOARD_HS100, MACH_ADM5120_HS100),
- ZYXEL_BOARD(ZYNOS_BOARD_P334, MACH_ADM5120_P334),
- ZYXEL_BOARD(ZYNOS_BOARD_P334U, MACH_ADM5120_P334U),
- ZYXEL_BOARD(ZYNOS_BOARD_P334W, MACH_ADM5120_P334W),
- ZYXEL_BOARD(ZYNOS_BOARD_P334WH, MACH_ADM5120_P334WH),
- ZYXEL_BOARD(ZYNOS_BOARD_P334WHD, MACH_ADM5120_P334WHD),
- ZYXEL_BOARD(ZYNOS_BOARD_P334WT, MACH_ADM5120_P334WT),
- ZYXEL_BOARD(ZYNOS_BOARD_P334WT_ALT, MACH_ADM5120_P334WT),
- ZYXEL_BOARD(ZYNOS_BOARD_P335, MACH_ADM5120_P335),
- ZYXEL_BOARD(ZYNOS_BOARD_P335PLUS, MACH_ADM5120_P335PLUS),
- ZYXEL_BOARD(ZYNOS_BOARD_P335U, MACH_ADM5120_P335U)
-};
-
-static unsigned long __init detect_machtype_bootbase(void)
-{
- int i;
-
- for (i = 0; i < ARRAY_SIZE(zynos_boards); i++) {
- if (zynos_boards[i].vendor_id == bootbase_info.vendor_id &&
- zynos_boards[i].board_id == bootbase_info.board_id) {
- return zynos_boards[i].mach_type;
- break;
- }
- }
-
- printk(KERN_WARNING "Unknown ZyXEL model (%u)\n",
- bootbase_info.board_id);
- return MACH_ADM5120_GENERIC;
-}
-
-static struct {
- unsigned long mach_type;
- u16 vid;
- u16 did;
- u16 svid;
- u16 sdid;
-} mylo_boards[] __initdata = {
-#define MYLO_BOARD(v, d, sv, sd, mt) \
- {.vid = (v), .did = (d), .svid = (sv), .sdid = (sd), .mach_type = (mt)}
-#define COMPEX_BOARD(d, mt) \
- MYLO_BOARD(VENID_COMPEX, (d), VENID_COMPEX, (d), (mt))
-
- COMPEX_BOARD(DEVID_COMPEX_NP27G, MACH_ADM5120_NP27G),
- COMPEX_BOARD(DEVID_COMPEX_NP28G, MACH_ADM5120_NP28G),
- COMPEX_BOARD(DEVID_COMPEX_NP28GHS, MACH_ADM5120_NP28GHS),
- COMPEX_BOARD(DEVID_COMPEX_WP54G, MACH_ADM5120_WP54G),
- COMPEX_BOARD(DEVID_COMPEX_WP54Gv1C, MACH_ADM5120_WP54Gv1C),
- COMPEX_BOARD(DEVID_COMPEX_WP54AG, MACH_ADM5120_WP54AG),
- COMPEX_BOARD(DEVID_COMPEX_WPP54G, MACH_ADM5120_WPP54G),
- COMPEX_BOARD(DEVID_COMPEX_WPP54AG, MACH_ADM5120_WPP54AG),
-};
-
-static unsigned long __init detect_machtype_myloader(void)
-{
- unsigned long ret;
- int i;
-
- ret = MACH_ADM5120_GENERIC;
- for (i = 0; i < ARRAY_SIZE(mylo_boards); i++) {
- if (mylo_boards[i].vid == myloader_info.vid &&
- mylo_boards[i].did == myloader_info.did &&
- mylo_boards[i].svid == myloader_info.svid &&
- mylo_boards[i].sdid == myloader_info.sdid) {
- ret = mylo_boards[i].mach_type;
- break;
- }
- }
-
- return ret;
-}
-
-static void __init prom_detect_machtype(void)
-{
- if (bootbase_present()) {
- adm5120_prom_type = ADM5120_PROM_BOOTBASE;
- mips_machtype = detect_machtype_bootbase();
- return;
- }
-
- if (cfe_present()) {
- adm5120_prom_type = ADM5120_PROM_CFE;
- mips_machtype = detect_machtype_cfe();
- return;
- }
-
- if (myloader_present()) {
- adm5120_prom_type = ADM5120_PROM_MYLOADER;
- mips_machtype = detect_machtype_myloader();
- return;
- }
-
- if (routerboot_present()) {
- adm5120_prom_type = ADM5120_PROM_ROUTERBOOT;
- mips_machtype = detect_machtype_routerboot();
- return;
- }
-
- if (generic_prom_present()) {
- adm5120_prom_type = ADM5120_PROM_GENERIC;
- mips_machtype = detect_machtype_generic();
- return;
- }
-
- mips_machtype = MACH_ADM5120_GENERIC;
-}
-
-/* TODO: this is an ugly hack for RouterBOARDS */
-extern char _image_cmdline;
-static void __init prom_init_cmdline(void)
-{
- char *cmd;
-
- /* init command line, register a default kernel command line */
- cmd = &_image_cmdline + 8;
- if (strlen(cmd) > 0)
- strcpy(arcs_cmdline, cmd);
- else
- strcpy(arcs_cmdline, CONFIG_CMDLINE);
-
-}
-
-#define UART_READ(r) \
- __raw_readl((void __iomem *)(KSEG1ADDR(ADM5120_UART0_BASE)+(r)))
-#define UART_WRITE(r, v) \
- __raw_writel((v), (void __iomem *)(KSEG1ADDR(ADM5120_UART0_BASE)+(r)))
-
-void __init prom_putchar(char ch)
-{
- while ((UART_READ(UART_REG_FLAG) & UART_FLAG_TXFE) == 0);
- UART_WRITE(UART_REG_DATA, ch);
- while ((UART_READ(UART_REG_FLAG) & UART_FLAG_TXFE) == 0);
-}
-
-void __init prom_init(void)
-{
- prom_detect_machtype();
-
- prom_init_cmdline();
-}
-
-void __init prom_free_prom_memory(void)
-{
- /* We do not have to prom memory to free */
-}
diff --git a/target/linux/adm5120/files/arch/mips/adm5120/prom/Makefile b/target/linux/adm5120/files/arch/mips/adm5120/prom/Makefile
deleted file mode 100644
index d844b600f3..0000000000
--- a/target/linux/adm5120/files/arch/mips/adm5120/prom/Makefile
+++ /dev/null
@@ -1,9 +0,0 @@
-#
-# Makefile for the ADMtek ADM5120 SoC specific parts of the kernel
-#
-
-lib-y += bootbase.o
-lib-y += cfe.o
-lib-y += generic.o
-lib-y += myloader.o
-lib-y += routerboot.o
diff --git a/target/linux/adm5120/files/arch/mips/adm5120/prom/bootbase.c b/target/linux/adm5120/files/arch/mips/adm5120/prom/bootbase.c
deleted file mode 100644
index cbdc598928..0000000000
--- a/target/linux/adm5120/files/arch/mips/adm5120/prom/bootbase.c
+++ /dev/null
@@ -1,114 +0,0 @@
-/*
- * $Id$
- *
- * ZyXEL's Bootbase specific prom routines
- *
- * Copyright (C) 2007 OpenWrt.org
- * Copyright (C) 2007 Gabor Juhos <juhosg at openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- *
- */
-
-#include <linux/types.h>
-#include <linux/autoconf.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/string.h>
-
-#include <asm/bootinfo.h>
-#include <asm/addrspace.h>
-#include <asm/byteorder.h>
-
-#include <adm5120_defs.h>
-#include <prom/zynos.h>
-#include "prom_read.h"
-
-#define ZYNOS_INFO_ADDR KSEG1ADDR(ADM5120_SRAM0_BASE+0x3F90)
-#define ZYNOS_HDBG_ADDR KSEG1ADDR(ADM5120_SRAM0_BASE+0x4000)
-#define BOOTEXT_ADDR_MIN KSEG1ADDR(ADM5120_SRAM0_BASE)
-#define BOOTEXT_ADDR_MAX (BOOTEXT_ADDR_MIN + (2*1024*1024))
-
-static int bootbase_found;
-static struct zynos_board_info *board_info;
-
-struct bootbase_info bootbase_info;
-
-static inline int bootbase_dbgarea_present(u8 *data)
-{
- u32 t;
-
- t = prom_read_be32(data+5);
- if (t != ZYNOS_MAGIC_DBGAREA1)
- return 0;
-
- t = prom_read_be32(data+9);
- if (t != ZYNOS_MAGIC_DBGAREA2)
- return 0;
-
- return 1;
-}
-
-static inline u32 bootbase_get_bootext_addr(void)
-{
- return prom_read_be32(&board_info->bootext_addr);
-}
-
-static inline u16 bootbase_get_vendor_id(void)
-{
-#define CHECK_VENDOR(n) (strnicmp(board_info->vendor, (n), strlen(n)) == 0)
- unsigned char vendor[ZYNOS_NAME_LEN];
- int i;
-
- for (i = 0; i < ZYNOS_NAME_LEN; i++)
- vendor[i] = board_info->vendor[i];
-
- if CHECK_VENDOR(ZYNOS_VENDOR_ZYXEL)
- return ZYNOS_VENDOR_ID_ZYXEL;
-
- if CHECK_VENDOR(ZYNOS_VENDOR_DLINK)
- return ZYNOS_VENDOR_ID_DLINK;
-
- if CHECK_VENDOR(ZYNOS_VENDOR_LUCENT)
- return ZYNOS_VENDOR_ID_LUCENT;
-
- if CHECK_VENDOR(ZYNOS_VENDOR_NETGEAR)
- return ZYNOS_VENDOR_ID_NETGEAR;
-
- return ZYNOS_VENDOR_ID_OTHER;
-}
-
-static inline u16 bootbase_get_board_id(void)
-{
- return prom_read_be16(&board_info->board_id);
-}
-
-int __init bootbase_present(void)
-{
- u32 t;
-
- if (bootbase_found)
- goto out;
-
- /* check presence of the dbgarea */
- if (bootbase_dbgarea_present((u8 *)ZYNOS_HDBG_ADDR) == 0)
- goto out;
-
- board_info = (struct zynos_board_info *)(ZYNOS_INFO_ADDR);
-
- /* check for a valid BootExt address */
- t = bootbase_get_bootext_addr();
- if ((t < BOOTEXT_ADDR_MIN) || (t > BOOTEXT_ADDR_MAX))
- goto out;
-
- bootbase_info.vendor_id = bootbase_get_vendor_id();
- bootbase_info.board_id = bootbase_get_board_id();
-
- bootbase_found = 1;
-
-out:
- return bootbase_found;
-}
-
diff --git a/target/linux/adm5120/files/arch/mips/adm5120/prom/cfe.c b/target/linux/adm5120/files/arch/mips/adm5120/prom/cfe.c
deleted file mode 100644
index 6999408053..0000000000
--- a/target/linux/adm5120/files/arch/mips/adm5120/prom/cfe.c
+++ /dev/null
@@ -1,72 +0,0 @@
-/*
- * $Id$
- *
- * Broadcom's CFE specific prom routines
- *
- * Copyright (C) 2007 OpenWrt.org
- * Copyright (C) 2007 Gabor Juhos <juhosg at openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- *
- */
-
-#include <linux/types.h>
-#include <linux/init.h>
-
-#include <asm/bootinfo.h>
-#include <asm/addrspace.h>
-
-#include <prom/cfe.h>
-#include "prom_read.h"
-
-/*
- * CFE based boards
- */
-#define CFE_EPTSEAL 0x43464531 /* CFE1 is the magic number to recognize CFE
-from other bootloaders */
-
-static int cfe_found;
-
-static u32 cfe_handle;
-static u32 cfe_entry;
-static u32 cfe_seal;
-
-int __init cfe_present(void)
-{
- /*
- * This method only works, when we are booted directly from the CFE.
- */
- u32 a1 = (u32) fw_arg1;
-
- if (cfe_found)
- return 1;
-
- cfe_handle = (u32) fw_arg0;
- cfe_entry = (u32) fw_arg2;
- cfe_seal = (u32) fw_arg3;
-
- /* Check for CFE by finding the CFE magic number */
- if (cfe_seal != CFE_EPTSEAL)
- return 0;
-
- /* cfe_a1_val must be 0, because only one CPU present in the ADM5120 */
- if (a1 != 0)
- return 0;
-
- /* The cfe_handle, and the cfe_entry must be kernel mode addresses */
- if ((cfe_handle < KSEG0) || (cfe_entry < KSEG0))
- return 0;
-
- cfe_found = 1;
- return 1;
-}
-
-char *cfe_getenv(char *envname)
-{
- if (cfe_found == 0)
- return NULL;
-
- return NULL;
-}
diff --git a/target/linux/adm5120/files/arch/mips/adm5120/prom/generic.c b/target/linux/adm5120/files/arch/mips/adm5120/prom/generic.c
deleted file mode 100644
index 58499425c7..0000000000
--- a/target/linux/adm5120/files/arch/mips/adm5120/prom/generic.c
+++ /dev/null
@@ -1,50 +0,0 @@
-/*
- * $Id$
- *
- * Generic PROM routines
- *
- * Copyright (C) 2007 OpenWrt.org
- * Copyright (C) 2007 Gabor Juhos <juhosg at openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/string.h>
-
-#include <asm/bootinfo.h>
-
-#include <prom/generic.h>
-
-static int *_prom_argc;
-static char **_prom_argv;
-static char **_prom_envp;
-
-char *generic_prom_getenv(char *envname)
-{
- char **env;
- char *ret;
-
- ret = NULL;
- for (env = _prom_envp; *env != NULL; env++) {
- if (strcmp(envname, *env++) == 0) {
- ret = *env;
- break;
- }
- }
-
- return ret;
-}
-
-int generic_prom_present(void)
-{
- _prom_argc = (int *)fw_arg0;
- _prom_argv = (char **)fw_arg1;
- _prom_envp = (char **)fw_arg2;
-
- return 1;
-}
diff --git a/target/linux/adm5120/files/arch/mips/adm5120/prom/myloader.c b/target/linux/adm5120/files/arch/mips/adm5120/prom/myloader.c
deleted file mode 100644
index e85ef7ab3e..0000000000
--- a/target/linux/adm5120/files/arch/mips/adm5120/prom/myloader.c
+++ /dev/null
@@ -1,65 +0,0 @@
-/*
- * $Id$
- *
- * Compex's MyLoader specific prom routines
- *
- * Copyright (C) 2007 OpenWrt.org
- * Copyright (C) 2007 Gabor Juhos <juhosg at openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- *
- */
-
-#include <linux/types.h>
-#include <linux/autoconf.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/string.h>
-
-#include <asm/bootinfo.h>
-#include <asm/addrspace.h>
-#include <asm/byteorder.h>
-
-#include <adm5120_defs.h>
-#include <prom/myloader.h>
-#include "prom_read.h"
-
-#define SYS_PARAMS_ADDR KSEG1ADDR(ADM5120_SRAM0_BASE+0x0F000)
-#define BOARD_PARAMS_ADDR KSEG1ADDR(ADM5120_SRAM0_BASE+0x0F800)
-#define PART_TABLE_ADDR KSEG1ADDR(ADM5120_SRAM0_BASE+0x10000)
-
-static int myloader_found;
-
-struct myloader_info myloader_info;
-
-int __init myloader_present(void)
-{
- struct mylo_system_params *sysp;
- struct mylo_board_params *boardp;
- struct mylo_partition_table *parts;
-
- if (myloader_found)
- goto out;
-
- sysp = (struct mylo_system_params *)(SYS_PARAMS_ADDR);
- boardp = (struct mylo_board_params *)(BOARD_PARAMS_ADDR);
- parts = (struct mylo_partition_table *)(PART_TABLE_ADDR);
-
- /* Check for some magic numbers */
- if ((le32_to_cpu(sysp->magic) != MYLO_MAGIC_SYS_PARAMS) ||
- (le32_to_cpu(boardp->magic) != MYLO_MAGIC_BOARD_PARAMS) ||
- (le32_to_cpu(parts->magic) != MYLO_MAGIC_PARTITIONS))
- goto out;
-
- myloader_info.vid = le32_to_cpu(sysp->vid);
- myloader_info.did = le32_to_cpu(sysp->did);
- myloader_info.svid = le32_to_cpu(sysp->svid);
- myloader_info.sdid = le32_to_cpu(sysp->sdid);
-
- myloader_found = 1;
-
-out:
- return myloader_found;
-}
diff --git a/target/linux/adm5120/files/arch/mips/adm5120/prom/prom_read.h b/target/linux/adm5120/files/arch/mips/adm5120/prom/prom_read.h
deleted file mode 100644
index d6b21c0126..0000000000
--- a/target/linux/adm5120/files/arch/mips/adm5120/prom/prom_read.h
+++ /dev/null
@@ -1,53 +0,0 @@
-/*
- * $Id$
- *
- * Generic prom definitions
- *
- * Copyright (C) 2007 OpenWrt.org
- * Copyright (C) 2007 Gabor Juhos <juhosg at openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- *
- */
-
-#ifndef _ADM5120_PROM_H_
-#define _ADM5120_PROM_H_
-
-/*
- * Helper routines
- */
-static inline u16 prom_read_le16(void *buf)
-{
- u8 *p = buf;
-
- return ((u16)p[0] + ((u16)p[1] << 8));
-}
-
-static inline u32 prom_read_le32(void *buf)
-{
- u8 *p = buf;
-
- return ((u32)p[0] + ((u32)p[1] << 8) + ((u32)p[2] << 16) +
- ((u32)p[3] << 24));
-}
-
-static inline u16 prom_read_be16(void *buf)
-{
- u8 *p = buf;
-
- return (((u16)p[0] << 8) + (u16)p[1]);
-}
-
-static inline u32 prom_read_be32(void *buf)
-{
- u8 *p = buf;
-
- return (((u32)p[0] << 24) + ((u32)p[1] << 16) + ((u32)p[2] << 8) +
- ((u32)p[3]));
-}
-
-#endif /* _ADM5120_PROM_H_ */
-
-
diff --git a/target/linux/adm5120/files/arch/mips/adm5120/prom/routerboot.c b/target/linux/adm5120/files/arch/mips/adm5120/prom/routerboot.c
deleted file mode 100644
index ce4ce23a1c..0000000000
--- a/target/linux/adm5120/files/arch/mips/adm5120/prom/routerboot.c
+++ /dev/null
@@ -1,124 +0,0 @@
-/*
- * $Id$
- *
- * Mikrotik's RouterBOOT specific prom routines
- *
- * Copyright (C) 2007 OpenWrt.org
- * Copyright (C) 2007 Gabor Juhos <juhosg at openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- *
- */
-
-#include <linux/types.h>
-#include <linux/autoconf.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/string.h>
-#include <linux/module.h>
-
-#include <asm/bootinfo.h>
-#include <asm/addrspace.h>
-
-#include <adm5120_defs.h>
-#include <prom/routerboot.h>
-#include "prom_read.h"
-
-struct rb_hard_settings rb_hs;
-static int rb_found;
-
-static int __init routerboot_load_hs(u8 *buf, u16 buflen)
-{
- u16 id, len;
-
- memset(&rb_hs, 0, sizeof(rb_hs));
-
- if (buflen < 4)
- return -1;
-
- if (prom_read_le32(buf) != RB_MAGIC_HARD)
- return -1;
-
- /* skip magic value */
- buf += 4;
- buflen -= 4;
-
- while (buflen > 2) {
- id = prom_read_le16(buf);
- buf += 2;
- buflen -= 2;
- if (id == RB_ID_TERMINATOR || buflen < 2)
- break;
-
- len = prom_read_le16(buf);
- buf += 2;
- buflen -= 2;
-
- if (buflen < len)
- break;
-
- switch (id) {
- case RB_ID_BIOS_VERSION:
- rb_hs.bios_ver = (char *)buf;
- break;
- case RB_ID_BOARD_NAME:
- rb_hs.name = (char *)buf;
- break;
- case RB_ID_MEMORY_SIZE:
- rb_hs.mem_size = prom_read_le32(buf);
- break;
- case RB_ID_MAC_ADDRESS_COUNT:
- rb_hs.mac_count = prom_read_le32(buf);
- break;
- case RB_ID_MAC_ADDRESS_PACK:
- if ((len / RB_MAC_SIZE) > 0)
- rb_hs.mac_base = buf;
- break;
- }
-
- buf += len;
- buflen -= len;
-
- }
-
- return 0;
-}
-
-#define RB_BS_OFFS 0x14
-#define RB_OFFS_MAX (128*1024)
-
-int __init routerboot_present(void)
-{
- struct rb_bios_settings *bs;
- u8 *base;
- u32 off, len;
-
- if (rb_found)
- goto out;
-
- base = (u8 *)KSEG1ADDR(ADM5120_SRAM0_BASE);
- bs = (struct rb_bios_settings *)(base + RB_BS_OFFS);
-
- off = prom_read_le32(&bs->hs_offs);
- len = prom_read_le32(&bs->hs_size);
- if (off > RB_OFFS_MAX)
- goto out;
-
- if (routerboot_load_hs(base+off, len) != 0)
- goto out;
-
- rb_found = 1;
-
-out:
- return rb_found;
-}
-
-char *routerboot_get_boardname(void)
-{
- if (rb_found == 0)
- return NULL;
-
- return rb_hs.name;
-}
diff --git a/target/linux/adm5120/files/arch/mips/adm5120/reset.c b/target/linux/adm5120/files/arch/mips/adm5120/reset.c
deleted file mode 100644
index 653d42c849..0000000000
--- a/target/linux/adm5120/files/arch/mips/adm5120/reset.c
+++ /dev/null
@@ -1,56 +0,0 @@
-/*
- * $Id$
- *
- * ADM5120 specific reset routines
- *
- * Copyright (C) 2007 OpenWrt.org
- * Copyright (C) 2007 Gabor Juhos <juhosg at openwrt.org>
- *
- * This code was based on the ADM5120 specific port of the Linux 2.6.10 kernel
- * done by Jeroen Vreeken
- * Copyright (C) 2005 Jeroen Vreeken (pe1rxq@amsat.org)
- *
- * Jeroen's code was based on the Linux 2.4.xx source codes found in various
- * tarballs released by Edimax for it's ADM5120 based devices.
- * Copyright (C) ADMtek Incorporated
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- *
- */
-
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-
-#include <linux/irq.h>
-#include <linux/io.h>
-
-#include <asm/addrspace.h>
-
-#include <adm5120_info.h>
-#include <adm5120_defs.h>
-#include <adm5120_switch.h>
-
-void (*adm5120_board_reset)(void);
-
-void adm5120_restart(char *command)
-{
- /* TODO: stop switch before reset */
-
- if (adm5120_board_reset)
- adm5120_board_reset();
-
- SW_WRITE_REG(SWITCH_REG_SOFT_RESET, 1);
-}
-
-void adm5120_halt(void)
-{
- local_irq_disable();
-
- while (1) {
- if (cpu_wait)
- cpu_wait();
- };
-}
diff --git a/target/linux/adm5120/files/arch/mips/adm5120/setup.c b/target/linux/adm5120/files/arch/mips/adm5120/setup.c
deleted file mode 100644
index 418a342e81..0000000000
--- a/target/linux/adm5120/files/arch/mips/adm5120/setup.c
+++ /dev/null
@@ -1,67 +0,0 @@
-/*
- * $Id$
- *
- * ADM5120 specific setup
- *
- * Copyright (C) 2007 OpenWrt.org
- * Copyright (C) 2007 Gabor Juhos <juhosg at openwrt.org>
- *
- * This code was based on the ADM5120 specific port of the Linux 2.6.10 kernel
- * done by Jeroen Vreeken
- * Copyright (C) 2005 Jeroen Vreeken (pe1rxq@amsat.org)
- *
- * Jeroen's code was based on the Linux 2.4.xx source codes found in various
- * tarballs released by Edimax for it's ADM5120 based devices
- * Copyright (C) ADMtek Incorporated
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- *
- */
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/io.h>
-
-#include <asm/reboot.h>
-#include <asm/time.h>
-
-#include <adm5120_info.h>
-#include <adm5120_defs.h>
-#include <adm5120_switch.h>
-#include <adm5120_board.h>
-
-static char *prom_names[ADM5120_PROM_LAST+1] __initdata = {
- [ADM5120_PROM_GENERIC] = "Generic",
- [ADM5120_PROM_CFE] = "CFE",
- [ADM5120_PROM_UBOOT] = "U-Boot",
- [ADM5120_PROM_MYLOADER] = "MyLoader",
- [ADM5120_PROM_ROUTERBOOT] = "RouterBOOT",
- [ADM5120_PROM_BOOTBASE] = "Bootbase"
-};
-
-static void __init adm5120_report(void)
-{
- printk(KERN_INFO "SoC : ADM%04X%s revision %d, running "
- "at %ldMHz\n",
- adm5120_product_code,
- adm5120_package_bga() ? "" : "P",
- adm5120_revision, (adm5120_speed / 1000000));
- printk(KERN_INFO "Bootdev : %s flash\n",
- adm5120_nand_boot ? "NAND":"NOR");
- printk(KERN_INFO "Prom : %s\n", prom_names[adm5120_prom_type]);
-}
-
-void __init plat_mem_setup(void)
-{
- adm5120_soc_init();
- adm5120_mem_init();
- adm5120_report();
-
- _machine_restart = adm5120_restart;
- _machine_halt = adm5120_halt;
- pm_power_off = adm5120_halt;
-
- set_io_port_base(KSEG1);
-}
diff --git a/target/linux/adm5120/files/arch/mips/adm5120/time.c b/target/linux/adm5120/files/arch/mips/adm5120/time.c
deleted file mode 100644
index 63191d4938..0000000000
--- a/target/linux/adm5120/files/arch/mips/adm5120/time.c
+++ /dev/null
@@ -1,35 +0,0 @@
-/*
- * $Id$
- *
- * ADM5120 specific hooks for MIPS CPU Counter/Compare timer
- *
- * Copyright (C) 2007 OpenWrt.org
- * Copyright (C) 2007 Gabor Juhos <juhosg at openwrt.org>
- *
- * This file was based on: arch/mips/gt64120/wrppmc/time.c
- * Original author: Mark.Zhan
- * Copyright (C) 1996, 1997, 2004 by Ralf Baechle
- * Copyright (C) 2006, Wind River System Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- *
- */
-
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/timex.h>
-
-#include <asm/irq.h>
-#include <asm/cpu.h>
-#include <asm/time.h>
-
-#include <adm5120_info.h>
-#include <adm5120_irq.h>
-
-void __init plat_time_init(void)
-{
- mips_hpt_frequency = adm5120_speed / 2;
-}
diff --git a/target/linux/adm5120/files/arch/mips/pci/pci-adm5120.c b/target/linux/adm5120/files/arch/mips/pci/pci-adm5120.c
deleted file mode 100644
index b0caef24fc..0000000000
--- a/target/linux/adm5120/files/arch/mips/pci/pci-adm5120.c
+++ /dev/null
@@ -1,284 +0,0 @@
-/*
- * $Id$
- *
- * ADM5120 PCI Host Controller driver
- *
- * Copyright (C) 2007 OpenWrt.org
- * Copyright (C) 2007 Gabor Juhos <juhosg at openwrt.org>
- *
- * This code was based on the ADM5120 specific port of the Linux 2.6.10 kernel
- * done by Jeroen Vreeken
- * Copyright (C) 2005 Jeroen Vreeken (pe1rxq@amsat.org)
- *
- * Jeroen's code was based on the Linux 2.4.xx source codes found in various
- * tarballs released by Edimax for it's ADM5120 based devices
- * Copyright (C) ADMtek Incorporated
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- *
- */
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/spinlock.h>
-#include <linux/io.h>
-
-#include <linux/pci.h>
-#include <linux/pci_ids.h>
-#include <linux/pci_regs.h>
-
-#include <asm/delay.h>
-#include <asm/bootinfo.h>
-
-#include <adm5120_defs.h>
-#include <adm5120_info.h>
-#include <adm5120_defs.h>
-#include <adm5120_platform.h>
-
-#undef DEBUG
-
-#ifdef DEBUG
-#define DBG(f, a...) printk(KERN_DEBUG f, ## a)
-#else
-#define DBG(f, a...) do {} while (0)
-#endif
-
-#define PCI_ENABLE 0x80000000
-
-/* -------------------------------------------------------------------------*/
-
-static unsigned int adm5120_pci_nr_irqs __initdata;
-static struct adm5120_pci_irq *adm5120_pci_irq_map __initdata;
-
-static spinlock_t pci_lock = SPIN_LOCK_UNLOCKED;
-
-/* -------------------------------------------------------------------------*/
-
-static inline void write_cfgaddr(u32 addr)
-{
- __raw_writel((addr | PCI_ENABLE),
- (void __iomem *)(KSEG1ADDR(ADM5120_PCICFG_ADDR)));
-}
-
-static inline void write_cfgdata(u32 data)
-{
- __raw_writel(data, (void __iomem *)KSEG1ADDR(ADM5120_PCICFG_DATA));
-}
-
-static inline u32 read_cfgdata(void)
-{
- return __raw_readl((void __iomem *)KSEG1ADDR(ADM5120_PCICFG_DATA));
-}
-
-static inline u32 mkaddr(struct pci_bus *bus, unsigned int devfn, int where)
-{
- return (((bus->number & 0xFF) << 16) | ((devfn & 0xFF) << 8) | \
- (where & 0xFC));
-}
-
-/* -------------------------------------------------------------------------*/
-
-static int pci_config_read(struct pci_bus *bus, unsigned int devfn, int where,
- int size, u32 *val)
-{
- unsigned long flags;
- u32 data;
-
- spin_lock_irqsave(&pci_lock, flags);
-
- write_cfgaddr(mkaddr(bus, devfn, where));
- data = read_cfgdata();
-
- DBG("PCI: cfg_read %02u.%02u.%01u/%02X:%01d, cfg:0x%08X",
- bus->number, PCI_SLOT(devfn), PCI_FUNC(devfn),
- where, size, data);
-
- switch (size) {
- case 1:
- if (where & 1)
- data >>= 8;
- if (where & 2)
- data >>= 16;
- data &= 0xFF;
- break;
- case 2:
- if (where & 2)
- data >>= 16;
- data &= 0xFFFF;
- break;
- }
-
- *val = data;
- DBG(", 0x%08X returned\n", data);
-
- spin_unlock_irqrestore(&pci_lock, flags);
-
- return PCIBIOS_SUCCESSFUL;
-}
-
-static int pci_config_write(struct pci_bus *bus, unsigned int devfn, int where,
- int size, u32 val)
-{
- unsigned long flags;
- u32 data;
- int s;
-
- spin_lock_irqsave(&pci_lock, flags);
-
- write_cfgaddr(mkaddr(bus, devfn, where));
- data = read_cfgdata();
-
- DBG("PCI: cfg_write %02u.%02u.%01u/%02X:%01d, cfg:0x%08X",
- bus->number, PCI_SLOT(devfn), PCI_FUNC(devfn),
- where, size, data);
-
- switch (size) {
- case 1:
- s = ((where & 3) << 3);
- data &= ~(0xFF << s);
- data |= ((val & 0xFF) << s);
- break;
- case 2:
- s = ((where & 2) << 4);
- data &= ~(0xFFFF << s);
- data |= ((val & 0xFFFF) << s);
- break;
- case 4:
- data = val;
- break;
- }
-
- write_cfgdata(data);
- DBG(", 0x%08X written\n", data);
-
- spin_unlock_irqrestore(&pci_lock, flags);
-
- return PCIBIOS_SUCCESSFUL;
-}
-
-struct pci_ops adm5120_pci_ops = {
- .read = pci_config_read,
- .write = pci_config_write,
-};
-
-/* -------------------------------------------------------------------------*/
-
-static void adm5120_pci_fixup(struct pci_dev *dev)
-{
- if (dev->devfn != 0)
- return;
-
- /* setup COMMAND register */
- pci_write_config_word(dev, PCI_COMMAND,
- (PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER));
-
- /* setup CACHE_LINE_SIZE register */
- pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, 4);
-
- /* setup BARS */
- pci_write_config_dword(dev, PCI_BASE_ADDRESS_0, 0);
- pci_write_config_dword(dev, PCI_BASE_ADDRESS_1, 0);
-}
-
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ADMTEK, PCI_DEVICE_ID_ADMTEK_ADM5120,
- adm5120_pci_fixup);
-
-/* -------------------------------------------------------------------------*/
-
-void __init adm5120_pci_set_irq_map(unsigned int nr_irqs,
- struct adm5120_pci_irq *map)
-{
- adm5120_pci_nr_irqs = nr_irqs;
- adm5120_pci_irq_map = map;
-}
-
-int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
- int irq = -1;
- int i;
-
- if ((!adm5120_pci_nr_irqs) || (!adm5120_pci_irq_map)) {
- printk(KERN_ALERT "PCI: pci_irq_map is not initialized\n");
- goto out;
- }
-
- if (slot < 1 || slot > 3) {
- printk(KERN_ALERT "PCI: slot number %u is not supported\n",
- slot);
- goto out;
- }
-
- for (i = 0; i < adm5120_pci_nr_irqs; i++) {
- if ((adm5120_pci_irq_map[i].slot == slot)
- && (adm5120_pci_irq_map[i].func == PCI_FUNC(dev->devfn))
- && (adm5120_pci_irq_map[i].pin == pin)) {
- irq = adm5120_pci_irq_map[i].irq;
- break;
- }
- }
-
- if (irq < 0) {
- printk(KERN_ALERT "PCI: no irq found for %s pin:%u\n",
- pci_name((struct pci_dev *)dev), pin);
- } else {
- printk(KERN_INFO "PCI: mapping irq for %s pin:%u, irq:%d\n",
- pci_name((struct pci_dev *)dev), pin, irq);
- }
-
-out:
- return irq;
-}
-
-int pcibios_plat_dev_init(struct pci_dev *dev)
-{
- return 0;
-}
-
-/* -------------------------------------------------------------------------*/
-
-static struct resource pci_io_resource = {
- .name = "ADM5120 PCI I/O",
- .start = ADM5120_PCIIO_BASE,
- .end = ADM5120_PCICFG_ADDR-1,
- .flags = IORESOURCE_IO
-};
-
-static struct resource pci_mem_resource = {
- .name = "ADM5120 PCI MEM",
- .start = ADM5120_PCIMEM_BASE,
- .end = ADM5120_PCIIO_BASE-1,
- .flags = IORESOURCE_MEM
-};
-
-static struct pci_controller adm5120_controller = {
- .pci_ops = &adm5120_pci_ops,
- .io_resource = &pci_io_resource,
- .mem_resource = &pci_mem_resource,
-};
-
-static int __init adm5120_pci_setup(void)
-{
- int pci_bios;
-
- pci_bios = adm5120_has_pci();
-
- printk(KERN_INFO "adm5120: system has %sPCI BIOS\n",
- pci_bios ? "" : "no ");
- if (pci_bios == 0)
- return -1;
-
- /* Avoid ISA compat ranges. */
- PCIBIOS_MIN_IO = 0x00000000;
- PCIBIOS_MIN_MEM = 0x00000000;
-
- /* Set I/O resource limits. */
- ioport_resource.end = 0x1fffffff;
- iomem_resource.end = 0xffffffff;
-
- register_pci_controller(&adm5120_controller);
- return 0;
-}
-
-arch_initcall(adm5120_pci_setup);
diff --git a/target/linux/adm5120/files/drivers/ata/pata_rb153_cf.c b/target/linux/adm5120/files/drivers/ata/pata_rb153_cf.c
deleted file mode 100644
index 8c0a0a36cc..0000000000
--- a/target/linux/adm5120/files/drivers/ata/pata_rb153_cf.c
+++ /dev/null
@@ -1,316 +0,0 @@
-/*
- * A low-level PATA driver to handle a Compact Flash connected on the
- * Mikrotik's RouterBoard 153 board.
- *
- * Copyright (C) 2007,2008 Gabor Juhos <juhosg at openwrt.org>
- *
- * This file was based on: drivers/ata/pata_ixp4xx_cf.c
- * Copyright (C) 2006-07 Tower Technologies
- * Author: Alessandro Zummo <a.zummo@towertech.it>
- *
- * Also was based on the driver for Linux 2.4.xx published by Mikrotik for
- * their RouterBoard 1xx and 5xx series devices. The original Mikrotik code
- * seems not to have a license.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-
-#include <linux/io.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-
-#include <linux/libata.h>
-#include <scsi/scsi_host.h>
-
-#include <asm/gpio.h>
-
-#define DRV_NAME "pata-rb153-cf"
-#define DRV_VERSION "0.4.0"
-#define DRV_DESC "PATA driver for RouterBOARD 153 Compact Flash"
-
-#define RB153_CF_MAXPORTS 1
-#define RB153_CF_IO_DELAY 100
-
-#define RB153_CF_REG_CMD 0x0800
-#define RB153_CF_REG_CTRL 0x080E
-#define RB153_CF_REG_DATA 0x0C00
-
-struct rb153_cf_info {
- unsigned int irq;
- void __iomem *iobase;
- unsigned int gpio_line;
- int frozen;
-};
-
-/* ------------------------------------------------------------------------ */
-
-static inline void rb153_pata_finish_io(struct ata_port *ap)
-{
- struct rb153_cf_info *info = ap->host->private_data;
-
- ata_altstatus(ap);
- ndelay(RB153_CF_IO_DELAY);
-
- set_irq_type(info->irq, IRQ_TYPE_LEVEL_HIGH);
-}
-
-static void rb153_pata_exec_command(struct ata_port *ap,
- const struct ata_taskfile *tf)
-{
- writeb(tf->command, ap->ioaddr.command_addr);
- rb153_pata_finish_io(ap);
-}
-
-static unsigned int rb153_pata_data_xfer(struct ata_device *adev, unsigned char *buf,
- unsigned int buflen, int write_data)
-{
- void __iomem *ioaddr = adev->link->ap->ioaddr.data_addr;
- unsigned int t;
-
- t = buflen;
- if (write_data) {
- for (; t > 0; t--, buf++)
- writeb(*buf, ioaddr);
- } else {
- for (; t > 0; t--, buf++)
- *buf = readb(ioaddr);
- }
-
- rb153_pata_finish_io(adev->link->ap);
- return buflen;
-}
-
-static void rb153_pata_freeze(struct ata_port *ap)
-{
- struct rb153_cf_info *info = ap->host->private_data;
-
- info->frozen = 1;
-}
-
-static void rb153_pata_thaw(struct ata_port *ap)
-{
- struct rb153_cf_info *info = ap->host->private_data;
-
- info->frozen = 0;
-}
-
-static irqreturn_t rb153_pata_irq_handler(int irq, void *dev_instance)
-{
- struct ata_host *ah = dev_instance;
- struct rb153_cf_info *info = ah->private_data;
-
- if (gpio_get_value(info->gpio_line)) {
- set_irq_type(info->irq, IRQ_TYPE_LEVEL_LOW);
- if (!info->frozen)
- ata_interrupt(irq, dev_instance);
- } else {
- set_irq_type(info->irq, IRQ_TYPE_LEVEL_HIGH);
- }
-
- return IRQ_HANDLED;
-}
-
-static void rb153_pata_irq_clear(struct ata_port *ap)
-{
-}
-
-static int rb153_pata_port_start(struct ata_port *ap)
-{
- return 0;
-}
-
-static struct ata_port_operations rb153_pata_port_ops = {
- .tf_load = ata_tf_load,
- .tf_read = ata_tf_read,
-
- .exec_command = rb153_pata_exec_command,
- .check_status = ata_check_status,
- .dev_select = ata_std_dev_select,
-
- .data_xfer = rb153_pata_data_xfer,
-
- .qc_prep = ata_qc_prep,
- .qc_issue = ata_qc_issue_prot,
-
- .freeze = rb153_pata_freeze,
- .thaw = rb153_pata_thaw,
- .error_handler = ata_bmdma_error_handler,
- .cable_detect = ata_cable_40wire,
-
- .irq_handler = rb153_pata_irq_handler,
- .irq_clear = rb153_pata_irq_clear,
- .irq_on = ata_irq_on,
-
- .port_start = rb153_pata_port_start,
-};
-
-/* ------------------------------------------------------------------------ */
-
-static struct scsi_host_template rb153_pata_sht = {
- .module = THIS_MODULE,
- .name = DRV_NAME,
- .ioctl = ata_scsi_ioctl,
- .queuecommand = ata_scsi_queuecmd,
- .slave_configure = ata_scsi_slave_config,
- .slave_destroy = ata_scsi_slave_destroy,
- .bios_param = ata_std_bios_param,
- .proc_name = DRV_NAME,
-
- .can_queue = ATA_DEF_QUEUE,
- .this_id = ATA_SHT_THIS_ID,
- .sg_tablesize = LIBATA_MAX_PRD,
- .dma_boundary = ATA_DMA_BOUNDARY,
- .cmd_per_lun = ATA_SHT_CMD_PER_LUN,
- .emulated = ATA_SHT_EMULATED,
- .use_clustering = ATA_SHT_USE_CLUSTERING,
-};
-
-/* ------------------------------------------------------------------------ */
-
-static void rb153_pata_setup_port(struct ata_port *ap,
- struct rb153_cf_info *info, unsigned long raw_cmd)
-{
- ap->ioaddr.cmd_addr = info->iobase + RB153_CF_REG_CMD;
- ap->ioaddr.ctl_addr = info->iobase + RB153_CF_REG_CTRL;
- ap->ioaddr.altstatus_addr = info->iobase + RB153_CF_REG_CTRL;
-
- ata_std_ports(&ap->ioaddr);
-
- ap->ioaddr.data_addr = info->iobase + RB153_CF_REG_DATA;
-
- ata_port_desc(ap, "cmd 0x%lx ctl 0x%lx", raw_cmd,
- raw_cmd + RB153_CF_REG_CTRL);
-}
-
-static __devinit int rb153_pata_driver_probe(struct platform_device *pdev)
-{
- unsigned int irq;
- int gpio;
- struct resource *res;
- struct ata_host *ah;
- struct ata_port *ap;
- struct rb153_cf_info *info;
- int ret;
-
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (!res) {
- dev_err(&pdev->dev, "no IOMEM resource found\n");
- return -EINVAL;
- }
-
- irq = platform_get_irq(pdev, 0);
- if (irq <= 0) {
- dev_err(&pdev->dev, "no IRQ resource found\n");
- return -ENOENT;
- }
-
- gpio = irq_to_gpio(irq);
- if (gpio < 0) {
- dev_err(&pdev->dev, "no GPIO found for irq%d\n", irq);
- return -ENOENT;
- }
-
- ret = gpio_request(gpio, DRV_NAME);
- if (ret) {
- dev_err(&pdev->dev, "GPIO request failed\n");
- return ret;
- }
-
- /* allocate host */
- ah = ata_host_alloc(&pdev->dev, RB153_CF_MAXPORTS);
- if (!ah)
- return -ENOMEM;
-
- platform_set_drvdata(pdev, ah);
-
- info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL);
- if (!info)
- return -ENOMEM;
-
- ah->private_data = info;
- info->gpio_line = gpio;
- info->irq = irq;
-
- info->iobase = devm_ioremap_nocache(&pdev->dev, res->start,
- res->end - res->start + 1);
- if (!info->iobase)
- return -ENOMEM;
-
- ret = gpio_direction_input(gpio);
- if (ret) {
- dev_err(&pdev->dev, "unable to set GPIO direction, err=%d\n",
- ret);
- goto err_free_gpio;
- }
-
- ap = ah->ports[0];
-
- ap->ops = &rb153_pata_port_ops;
- ap->pio_mask = 0x1f; /* PIO4 */
- ap->flags = ATA_FLAG_NO_LEGACY | ATA_FLAG_MMIO;
-
- rb153_pata_setup_port(ap, info, res->start);
-
- ret = ata_host_activate(ah, irq, rb153_pata_irq_handler,
- IRQF_TRIGGER_LOW, &rb153_pata_sht);
- if (ret)
- goto err_free_gpio;
-
- return 0;
-
-err_free_gpio:
- gpio_free(gpio);
-
- return ret;
-}
-
-static __devexit int rb153_pata_driver_remove(struct platform_device *pdev)
-{
- struct ata_host *ah = platform_get_drvdata(pdev);
- struct rb153_cf_info *info = ah->private_data;
-
- ata_host_detach(ah);
- gpio_free(info->gpio_line);
-
- return 0;
-}
-
-static struct platform_driver rb153_pata_platform_driver = {
- .probe = rb153_pata_driver_probe,
- .remove = __devexit_p(rb153_pata_driver_remove),
- .driver = {
- .name = DRV_NAME,
- .owner = THIS_MODULE,
- },
-};
-
-/* ------------------------------------------------------------------------ */
-
-#define DRV_INFO DRV_DESC " version " DRV_VERSION
-
-static int __init rb153_pata_module_init(void)
-{
- printk(KERN_INFO DRV_INFO "\n");
-
- return platform_driver_register(&rb153_pata_platform_driver);
-}
-
-static void __exit rb153_pata_module_exit(void)
-{
- platform_driver_unregister(&rb153_pata_platform_driver);
-}
-
-MODULE_AUTHOR("Gabor Juhos <juhosg at openwrt.org>");
-MODULE_DESCRIPTION(DRV_DESC);
-MODULE_VERSION(DRV_VERSION);
-MODULE_LICENSE("GPL v2");
-
-module_init(rb153_pata_module_init);
-module_exit(rb153_pata_module_exit);
diff --git a/target/linux/adm5120/files/drivers/leds/leds-adm5120.c b/target/linux/adm5120/files/drivers/leds/leds-adm5120.c
deleted file mode 100644
index 2eb4083147..0000000000
--- a/target/linux/adm5120/files/drivers/leds/leds-adm5120.c
+++ /dev/null
@@ -1,431 +0,0 @@
-/*
- * $Id$
- *
- * ADM5120 GPIO LED devices
- *
- * Copyright (C) 2007,2008 OpenWrt.org
- * Copyright (C) 2007,2008 Gabor Juhos <juhosg at openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/leds.h>
-#include <linux/err.h>
-
-#include <linux/io.h>
-#include <linux/leds.h>
-
-#include <asm/bootinfo.h>
-#include <asm/gpio.h>
-
-#include <adm5120_info.h>
-
-#define DRV_DESC "LED driver for the ADM5120 based boards"
-#define DRV_VERSION "0.2.1"
-
-#define NUM_LEDS_MAX 23
-#define ADM5120_GPIO_xxxx 0x100 /* an unknown pin */
-
-struct mach_data {
- unsigned long machtype;
- unsigned nr_leds;
- struct gpio_led *leds;
-};
-
-struct adm5120_leddev {
- struct platform_device pdev;
- struct gpio_led led;
- struct gpio_led_platform_data pdata;
-};
-
-static int led_count;
-static struct adm5120_leddev *led_devs[NUM_LEDS_MAX];
-
-#define LED_ARRAY(n) \
-static struct gpio_led n ## _leds [] __initdata =
-
-#define LED_DATA(n, t, g, a) { \
- .name = (n), \
- .default_trigger = (t), \
- .gpio = (g), \
- .active_low = (a) \
-}
-
-#define LED_STD(g, n, t) LED_DATA((n), (t), (g), 0)
-#define LED_INV(g, n, t) LED_DATA((n), (t), (g), 1)
-
-/*
- * Cellvision boards
- */
-
-LED_ARRAY(cas771) {
- LED_STD(ADM5120_GPIO_PIN0, "cam_flash", NULL),
- /* GPIO PIN3 is the reset */
- LED_STD(ADM5120_GPIO_PIN6, "access", NULL),
- LED_STD(ADM5120_GPIO_P0L1, "status", NULL),
- LED_STD(ADM5120_GPIO_P0L2, "diag", NULL),
-};
-
-/*
- * Compex boards
- */
-#if defined(CONFIG_LEDS_ADM5120_EXPERIMENTAL)
-LED_ARRAY(np27g) { /* FIXME: untested */
- LED_STD(ADM5120_GPIO_xxxx, "lan1", NULL),
- LED_STD(ADM5120_GPIO_xxxx, "lan2", NULL),
- LED_STD(ADM5120_GPIO_xxxx, "lan3", NULL),
- LED_STD(ADM5120_GPIO_xxxx, "lan4", NULL),
- LED_STD(ADM5120_GPIO_xxxx, "wan_cond", NULL),
- LED_STD(ADM5120_GPIO_xxxx, "wlan", NULL),
- LED_STD(ADM5120_GPIO_xxxx, "wan_act", NULL),
- LED_STD(ADM5120_GPIO_xxxx, "usb1", NULL),
- LED_STD(ADM5120_GPIO_xxxx, "usb2", NULL),
- LED_INV(ADM5120_GPIO_PIN2, "power", NULL),
- LED_STD(ADM5120_GPIO_xxxx, "diag", NULL),
-};
-#endif
-
-LED_ARRAY(np28g) {
- LED_INV(ADM5120_GPIO_PIN2, "diag", NULL),
- LED_INV(ADM5120_GPIO_PIN3, "power", NULL),
- LED_INV(ADM5120_GPIO_PIN6, "wan_cond", NULL),
- LED_INV(ADM5120_GPIO_PIN7, "wifi", NULL),
- LED_INV(ADM5120_GPIO_P0L2, "usb1", NULL),
- LED_INV(ADM5120_GPIO_P1L0, "lan1", NULL),
- LED_INV(ADM5120_GPIO_P1L2, "usb2", NULL),
- LED_INV(ADM5120_GPIO_P2L0, "lan2", NULL),
- LED_INV(ADM5120_GPIO_P2L2, "usb3", NULL),
- LED_INV(ADM5120_GPIO_P3L0, "lan3", NULL),
- LED_INV(ADM5120_GPIO_P3L2, "usb4", NULL),
- LED_INV(ADM5120_GPIO_P4L0, "wan", NULL),
-};
-
-LED_ARRAY(wp54g) {
- LED_INV(ADM5120_GPIO_PIN2, "diag", NULL),
- LED_INV(ADM5120_GPIO_PIN6, "wlan", NULL),
- LED_INV(ADM5120_GPIO_PIN7, "wan", NULL),
- LED_INV(ADM5120_GPIO_P0L0, "lan1", NULL),
- LED_INV(ADM5120_GPIO_P1L0, "lan2", NULL),
-};
-
-/*
- * Edimax boards
- */
-LED_ARRAY(br6104k) {
- LED_STD(ADM5120_GPIO_PIN0, "power", NULL),
- LED_INV(ADM5120_GPIO_P0L1, "wan_speed", NULL),
- LED_INV(ADM5120_GPIO_P0L0, "wan_lnkact", NULL),
- LED_INV(ADM5120_GPIO_P1L1, "lan1_speed", NULL),
- LED_INV(ADM5120_GPIO_P1L0, "lan1_lnkact", NULL),
- LED_INV(ADM5120_GPIO_P2L1, "lan2_speed", NULL),
- LED_INV(ADM5120_GPIO_P2L0, "lan2_lnkact", NULL),
- LED_INV(ADM5120_GPIO_P3L1, "lan3_speed", NULL),
- LED_INV(ADM5120_GPIO_P3L0, "lan3_lnkact", NULL),
- LED_INV(ADM5120_GPIO_P4L1, "lan4_speed", NULL),
- LED_INV(ADM5120_GPIO_P4L0, "lan4_lnkact", NULL),
-};
-
-LED_ARRAY(br61x4wg) {
- LED_STD(ADM5120_GPIO_PIN0, "power", NULL),
- LED_STD(ADM5120_GPIO_PIN5, "wlan", NULL),
- LED_INV(ADM5120_GPIO_P0L1, "wan_speed", NULL),
- LED_INV(ADM5120_GPIO_P0L0, "wan_lnkact", NULL),
- LED_INV(ADM5120_GPIO_P1L1, "lan1_speed", NULL),
- LED_INV(ADM5120_GPIO_P1L0, "lan1_lnkact", NULL),
- LED_INV(ADM5120_GPIO_P2L1, "lan2_speed", NULL),
- LED_INV(ADM5120_GPIO_P2L0, "lan2_lnkact", NULL),
- LED_INV(ADM5120_GPIO_P3L1, "lan3_speed", NULL),
- LED_INV(ADM5120_GPIO_P3L0, "lan3_lnkact", NULL),
- LED_INV(ADM5120_GPIO_P4L1, "lan4_speed", NULL),
- LED_INV(ADM5120_GPIO_P4L0, "lan4_lnkact", NULL),
-};
-
-/*
- * Infineon boards
- */
-LED_ARRAY(easy5120rt) {
- LED_INV(ADM5120_GPIO_PIN6, "user", NULL),
- LED_INV(ADM5120_GPIO_P0L0, "lan0_led1", NULL),
- LED_INV(ADM5120_GPIO_P0L1, "lan0_led2", NULL),
- LED_INV(ADM5120_GPIO_P1L0, "lan1_led1", NULL),
- LED_INV(ADM5120_GPIO_P1L1, "lan1_led2", NULL),
- LED_INV(ADM5120_GPIO_P2L0, "lan2_led1", NULL),
- LED_INV(ADM5120_GPIO_P2L1, "lan2_led2", NULL),
- LED_INV(ADM5120_GPIO_P3L0, "lan3_led1", NULL),
- LED_INV(ADM5120_GPIO_P3L1, "lan3_led2", NULL),
- LED_INV(ADM5120_GPIO_P4L0, "wan", NULL),
-};
-
-/*
- * Mikrotik boards
- */
-LED_ARRAY(rb100) {
- LED_STD(ADM5120_GPIO_PIN3, "user", NULL),
- LED_INV(ADM5120_GPIO_P0L1, "lan_speed", NULL),
- LED_INV(ADM5120_GPIO_P0L0, "lan_lnkact", NULL),
-};
-
-LED_ARRAY(rb133) {
- LED_STD(ADM5120_GPIO_PIN6, "power", NULL),
- LED_STD(ADM5120_GPIO_PIN5, "user", NULL),
- LED_INV(ADM5120_GPIO_P2L1, "lan1_speed", NULL), /* untested */
- LED_INV(ADM5120_GPIO_P2L0, "lan1_lnkact", NULL), /* untested */
- LED_INV(ADM5120_GPIO_P1L1, "lan2_speed", NULL), /* untested */
- LED_INV(ADM5120_GPIO_P1L0, "lan2_lnkact", NULL), /* untested */
- LED_INV(ADM5120_GPIO_P0L1, "lan3_speed", NULL), /* untested */
- LED_INV(ADM5120_GPIO_P0L0, "lan3_lnkact", NULL), /* untested */
-};
-
-LED_ARRAY(rb133c) {
- LED_STD(ADM5120_GPIO_PIN6, "power", NULL),
- LED_STD(ADM5120_GPIO_PIN5, "user", NULL),
- LED_INV(ADM5120_GPIO_P2L1, "lan1_speed", NULL), /* untested */
- LED_INV(ADM5120_GPIO_P2L0, "lan1_lnkact", NULL), /* untested */
-};
-
-LED_ARRAY(rb150) {
- LED_STD(ADM5120_GPIO_P0L2, "user", NULL),
- LED_INV(ADM5120_GPIO_P0L1, "lan1_led1", NULL), /* untested */
- LED_INV(ADM5120_GPIO_P0L0, "lan1_led2", NULL), /* untested */
- LED_INV(ADM5120_GPIO_P1L1, "lan5_led1", NULL), /* untested */
- LED_INV(ADM5120_GPIO_P1L0, "lan5_led2", NULL), /* untested */
- LED_INV(ADM5120_GPIO_P2L1, "lan4_led1", NULL), /* untested */
- LED_INV(ADM5120_GPIO_P2L0, "lan4_led2", NULL), /* untested */
- LED_INV(ADM5120_GPIO_P3L1, "lan3_led1", NULL), /* untested */
- LED_INV(ADM5120_GPIO_P3L0, "lan3_led2", NULL), /* untested */
- LED_INV(ADM5120_GPIO_P4L1, "lan2_led1", NULL), /* untested */
- LED_INV(ADM5120_GPIO_P4L0, "lan2_led2", NULL), /* untested */
-};
-
-LED_ARRAY(rb153) {
- LED_STD(ADM5120_GPIO_PIN5, "user", NULL),
- LED_INV(ADM5120_GPIO_P0L1, "lan1_speed", NULL),
- LED_INV(ADM5120_GPIO_P0L0, "lan1_lnkact", NULL),
- LED_INV(ADM5120_GPIO_P1L1, "lan5_speed", NULL),
- LED_INV(ADM5120_GPIO_P1L0, "lan5_lnkact", NULL),
- LED_INV(ADM5120_GPIO_P2L1, "lan4_speed", NULL),
- LED_INV(ADM5120_GPIO_P2L0, "lan4_lnkact", NULL),
- LED_INV(ADM5120_GPIO_P3L1, "lan3_speed", NULL),
- LED_INV(ADM5120_GPIO_P3L0, "lan3_lnkact", NULL),
- LED_INV(ADM5120_GPIO_P4L1, "lan2_speed", NULL),
- LED_INV(ADM5120_GPIO_P4L0, "lan2_lnkact", NULL),
-};
-
-/*
- * ZyXEL boards
- */
-#if defined(CONFIG_LEDS_ADM5120_EXPERIMENTAL)
-LED_ARRAY(p334) { /* FIXME: untested */
- LED_INV(ADM5120_GPIO_xxxx, "power", NULL),
- LED_INV(ADM5120_GPIO_xxxx, "lan1", NULL),
- LED_INV(ADM5120_GPIO_xxxx, "lan2", NULL),
- LED_INV(ADM5120_GPIO_xxxx, "lan3", NULL),
- LED_INV(ADM5120_GPIO_xxxx, "lan4", NULL),
- LED_INV(ADM5120_GPIO_xxxx, "wan", NULL),
-};
-#endif
-
-LED_ARRAY(p334wt) {
- LED_INV(ADM5120_GPIO_PIN2, "power", NULL),
- LED_INV(ADM5120_GPIO_P3L0, "lan1", NULL),
- LED_INV(ADM5120_GPIO_P2L0, "lan2", NULL),
- LED_INV(ADM5120_GPIO_P1L0, "lan3", NULL),
- LED_INV(ADM5120_GPIO_P0L0, "lan4", NULL),
- LED_INV(ADM5120_GPIO_P4L0, "wan", NULL),
- LED_INV(ADM5120_GPIO_P4L2, "wlan", NULL),
- LED_INV(ADM5120_GPIO_P2L2, "otist", NULL),
- LED_INV(ADM5120_GPIO_P1L2, "hidden", NULL),
-};
-
-#if defined(CONFIG_LEDS_ADM5120_EXPERIMENTAL)
-LED_ARRAY(p335) { /* FIXME: untested */
- LED_INV(ADM5120_GPIO_PIN2, "power", NULL),
- LED_INV(ADM5120_GPIO_P3L0, "lan1", NULL),
- LED_INV(ADM5120_GPIO_P2L0, "lan2", NULL),
- LED_INV(ADM5120_GPIO_P1L0, "lan3", NULL),
- LED_INV(ADM5120_GPIO_P0L0, "lan4", NULL),
- LED_INV(ADM5120_GPIO_P4L0, "wan", NULL),
- LED_INV(ADM5120_GPIO_P4L2, "wlan", NULL),
- LED_INV(ADM5120_GPIO_P2L2, "otist", NULL),
- LED_INV(ADM5120_GPIO_xxxx, "usb", NULL),
-};
-#endif
-
-/*
- * Generic board
- */
-LED_ARRAY(generic) {
-#if defined(CONFIG_LEDS_ADM5120_DIAG)
- LED_STD(ADM5120_GPIO_PIN0, "gpio0", NULL),
- LED_STD(ADM5120_GPIO_PIN1, "gpio1", NULL),
- LED_STD(ADM5120_GPIO_PIN2, "gpio2", NULL),
- LED_STD(ADM5120_GPIO_PIN3, "gpio3", NULL),
- LED_STD(ADM5120_GPIO_PIN4, "gpio4", NULL),
- LED_STD(ADM5120_GPIO_PIN5, "gpio5", NULL),
- LED_STD(ADM5120_GPIO_PIN6, "gpio6", NULL),
- LED_STD(ADM5120_GPIO_PIN7, "gpio7", NULL),
- LED_STD(ADM5120_GPIO_P0L0, "port0led0", NULL),
- LED_STD(ADM5120_GPIO_P0L1, "port0led1", NULL),
- LED_STD(ADM5120_GPIO_P0L2, "port0led2", NULL),
- LED_STD(ADM5120_GPIO_P1L0, "port1led0", NULL),
- LED_STD(ADM5120_GPIO_P1L1, "port1led1", NULL),
- LED_STD(ADM5120_GPIO_P1L2, "port1led2", NULL),
- LED_STD(ADM5120_GPIO_P2L0, "port2led0", NULL),
- LED_STD(ADM5120_GPIO_P2L1, "port2led1", NULL),
- LED_STD(ADM5120_GPIO_P2L2, "port2led2", NULL),
- LED_STD(ADM5120_GPIO_P3L0, "port3led0", NULL),
- LED_STD(ADM5120_GPIO_P3L1, "port3led1", NULL),
- LED_STD(ADM5120_GPIO_P3L2, "port3led2", NULL),
- LED_STD(ADM5120_GPIO_P4L0, "port4led0", NULL),
- LED_STD(ADM5120_GPIO_P4L1, "port4led1", NULL),
- LED_STD(ADM5120_GPIO_P4L2, "port4led2", NULL),
-#endif
-};
-
-#define MACH_DATA(m, n) { \
- .machtype = (m), \
- .nr_leds = ARRAY_SIZE(n ## _leds), \
- .leds = n ## _leds \
-}
-
-static struct mach_data machines[] __initdata = {
- MACH_DATA(MACH_ADM5120_GENERIC, generic),
- /* Cellvision */
- MACH_DATA(MACH_ADM5120_CAS771, cas771),
- /* Compex */
- MACH_DATA(MACH_ADM5120_NP28G, np28g),
- MACH_DATA(MACH_ADM5120_NP28GHS, np28g),
- MACH_DATA(MACH_ADM5120_WP54AG, wp54g),
- MACH_DATA(MACH_ADM5120_WP54G, wp54g),
- MACH_DATA(MACH_ADM5120_WP54G_WRT, wp54g),
- MACH_DATA(MACH_ADM5120_WPP54AG, wp54g),
- MACH_DATA(MACH_ADM5120_WPP54G, wp54g),
- /* Edimax */
- MACH_DATA(MACH_ADM5120_BR6104K, br6104k),
- MACH_DATA(MACH_ADM5120_BR61x4WG, br61x4wg),
- /* Infineon */
- MACH_DATA(MACH_ADM5120_EASY5120RT, easy5120rt),
- /* Mikrotik */
- MACH_DATA(MACH_ADM5120_RB_111, rb100),
- MACH_DATA(MACH_ADM5120_RB_112, rb100),
- MACH_DATA(MACH_ADM5120_RB_133, rb133),
- MACH_DATA(MACH_ADM5120_RB_133C, rb133c),
- MACH_DATA(MACH_ADM5120_RB_150, rb150),
- MACH_DATA(MACH_ADM5120_RB_153, rb153),
- /* ZyXEL */
- MACH_DATA(MACH_ADM5120_P334WT, p334wt),
-#if defined(CONFIG_LEDS_ADM5120_EXPERIMENTAL)
- /* untested */
- MACH_DATA(MACH_ADM5120_P334, p334),
- MACH_DATA(MACH_ADM5120_P335, p335),
- MACH_DATA(MACH_ADM5120_NP27G, np27g),
-#endif
-};
-
-static struct adm5120_leddev * __init
-create_leddev(int id, struct gpio_led *led)
-{
- struct adm5120_leddev *p;
-
- p = kzalloc(sizeof(*p), GFP_KERNEL);
- if (p == NULL)
- return NULL;
-
- memcpy(&p->led, led, sizeof(p->led));
- p->pdev.name = "leds-gpio";
- p->pdev.id = id;
- p->pdev.dev.platform_data = &p->pdata;
- p->pdata.num_leds = 1;
- p->pdata.leds = &p->led;
-
- return p;
-}
-
-static struct mach_data * __init
-adm5120_leds_findmach(unsigned long machtype)
-{
- struct mach_data *mach;
- int i;
-
- mach = NULL;
- for (i = 0; i < ARRAY_SIZE(machines); i++) {
- if (machines[i].machtype == machtype) {
- mach = &machines[i];
- break;
- }
- };
-
-#if defined(CONFIG_LEDS_ADM5120_DIAG)
- if (mach == NULL)
- mach = machines;
-#endif
-
- return mach;
-}
-
-static int __init
-adm5120_leds_init(void)
-{
- struct mach_data *mach;
- int i, ret;
-
- mach = adm5120_leds_findmach(mips_machtype);
- if (mach == NULL) {
- printk(KERN_ERR "leds-adm5120: unsupported board\n");
- ret = -EINVAL;
- goto err;
- }
-
- for (i = 0; i < mach->nr_leds; i++) {
- led_devs[i] = create_leddev(i, &mach->leds[i]);
- if (led_devs[i] == NULL) {
- ret = -ENOMEM;
- goto err_destroy;
- }
- }
-
- for (i = 0; i < mach->nr_leds; i++) {
- ret = platform_device_register(&led_devs[i]->pdev);
- if (ret)
- goto err_unregister;
- }
-
- led_count = mach->nr_leds;
- return 0;
-
-err_unregister:
- for (i--; i >= 0; i--)
- platform_device_unregister(&led_devs[i]->pdev);
-
-err_destroy:
- for (i = 0; i < led_count; i++)
- kfree(led_devs[i]);
-err:
- return ret;
-}
-
-static void __exit
-adm5120_leds_exit(void)
-{
- int i;
-
- for (i = 0; i < led_count; i++) {
- platform_device_unregister(&led_devs[i]->pdev);
- kfree(led_devs[i]);
- }
-}
-
-module_init(adm5120_leds_init);
-module_exit(adm5120_leds_exit);
-
-MODULE_AUTHOR("Gabor Juhos <juhosg at openwrt.org>");
-MODULE_DESCRIPTION(DRV_DESC);
-MODULE_LICENSE("GPL v2");
-MODULE_VERSION(DRV_VERSION);
-
diff --git a/target/linux/adm5120/files/drivers/leds/ledtrig-adm5120-switch.c b/target/linux/adm5120/files/drivers/leds/ledtrig-adm5120-switch.c
deleted file mode 100644
index b1b9c503c9..0000000000
--- a/target/linux/adm5120/files/drivers/leds/ledtrig-adm5120-switch.c
+++ /dev/null
@@ -1,149 +0,0 @@
-/*
- * LED ADM5120 Switch Port State Trigger
- *
- * Copyright (C) 2007 Bernhard Held <bernhard at bernhardheld.de>
- * Copyright (C) 2007 Gabor Juhos <juhosg at openwrt.org>
- *
- * This file was based on: drivers/leds/ledtrig-timer.c
- * Copyright 2005-2006 Openedhand Ltd.
- * Author: Richard Purdie
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/device.h>
-
-#include <asm/gpio.h>
-
-#include "leds.h"
-
-#define DRV_NAME "port_state"
-#define DRV_DESC "LED ADM5120 Switch Port State Trigger"
-
-struct port_state {
- char *name;
- unsigned int value;
-};
-
-#define PORT_STATE(n,v) {.name = (n), .value = (v)}
-
-static struct port_state port_states[] = {
- PORT_STATE("off", LED_OFF),
- PORT_STATE("on", LED_FULL),
- PORT_STATE("flash", ADM5120_GPIO_FLASH),
- PORT_STATE("link", ADM5120_GPIO_LINK),
- PORT_STATE("speed", ADM5120_GPIO_SPEED),
- PORT_STATE("duplex", ADM5120_GPIO_DUPLEX),
- PORT_STATE("act", ADM5120_GPIO_ACT),
- PORT_STATE("coll", ADM5120_GPIO_COLL),
- PORT_STATE("link_act", ADM5120_GPIO_LINK_ACT),
- PORT_STATE("duplex_coll", ADM5120_GPIO_DUPLEX_COLL),
- PORT_STATE("10M_act", ADM5120_GPIO_10M_ACT),
- PORT_STATE("100M_act", ADM5120_GPIO_100M_ACT),
-};
-
-static ssize_t led_port_state_show(struct device *dev,
- struct device_attribute *attr, char *buf)
-{
- struct led_classdev *led_cdev = dev_get_drvdata(dev);
- struct port_state *state = led_cdev->trigger_data;
- int len = 0;
- int i;
-
- *buf = '\0';
- for (i = 0; i < ARRAY_SIZE(port_states); i++) {
- if (&port_states[i] == state)
- len += sprintf(buf+len, "[%s] ", port_states[i].name);
- else
- len += sprintf(buf+len, "%s ", port_states[i].name);
- }
- len += sprintf(buf+len, "\n");
-
- return len;
-}
-
-static ssize_t led_port_state_store(struct device *dev,
- struct device_attribute *attr, const char *buf, size_t size)
-{
- struct led_classdev *led_cdev = dev_get_drvdata(dev);
- size_t len;
- int i;
-
- for (i = 0; i < ARRAY_SIZE(port_states); i++) {
- len = strlen(port_states[i].name);
- if (strncmp(port_states[i].name, buf, len) != 0)
- continue;
-
- if (buf[len] != '\0' && buf[len] != '\n')
- continue;
-
- led_cdev->trigger_data = &port_states[i];
- led_set_brightness(led_cdev, port_states[i].value);
- return size;
- }
-
- return -EINVAL;
-}
-
-static DEVICE_ATTR(port_state, 0644, led_port_state_show,
- led_port_state_store);
-
-static void adm5120_switch_trig_activate(struct led_classdev *led_cdev)
-{
- struct port_state *state = port_states;
- int rc;
-
- led_cdev->trigger_data = state;
-
- rc = device_create_file(led_cdev->dev, &dev_attr_port_state);
- if (rc)
- goto err;
-
- led_set_brightness(led_cdev, state->value);
-
- return;
-err:
- led_cdev->trigger_data = NULL;
-}
-
-static void adm5120_switch_trig_deactivate(struct led_classdev *led_cdev)
-{
- struct port_state *state = led_cdev->trigger_data;
-
- if (!state)
- return;
-
- device_remove_file(led_cdev->dev, &dev_attr_port_state);
-
-}
-
-static struct led_trigger adm5120_switch_led_trigger = {
- .name = DRV_NAME,
- .activate = adm5120_switch_trig_activate,
- .deactivate = adm5120_switch_trig_deactivate,
-};
-
-static int __init adm5120_switch_trig_init(void)
-{
- led_trigger_register(&adm5120_switch_led_trigger);
- return 0;
-}
-
-static void __exit adm5120_switch_trig_exit(void)
-{
- led_trigger_unregister(&adm5120_switch_led_trigger);
-}
-
-module_init(adm5120_switch_trig_init);
-module_exit(adm5120_switch_trig_exit);
-
-MODULE_AUTHOR("Bernhard Held <bernhard at bernhardheld.de>, "
- "Gabor Juhos <juhosg at openwrt.org>");
-MODULE_DESCRIPTION(DRV_DESC);
-MODULE_LICENSE("GPL v2");
diff --git a/target/linux/adm5120/files/drivers/mtd/maps/adm5120-flash.c b/target/linux/adm5120/files/drivers/mtd/maps/adm5120-flash.c
deleted file mode 100644
index c637c4ff0d..0000000000
--- a/target/linux/adm5120/files/drivers/mtd/maps/adm5120-flash.c
+++ /dev/null
@@ -1,571 +0,0 @@
-/*
- * $Id$
- *
- * Platform driver for NOR flash devices on ADM5120 based boards
- *
- * Copyright (C) 2007 OpenWrt.org
- * Copyright (C) 2007 Gabor Juhos <juhosg at openwrt.org>
- *
- * This file was derived from: drivers/mtd/map/physmap.c
- * Copyright (C) 2003 MontaVista Software Inc.
- * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- *
- */
-
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/slab.h>
-#include <linux/io.h>
-#include <linux/device.h>
-#include <linux/platform_device.h>
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/map.h>
-#include <linux/mtd/partitions.h>
-
-#include <adm5120_defs.h>
-#include <adm5120_switch.h>
-#include <adm5120_mpmc.h>
-#include <adm5120_platform.h>
-
-#define DRV_NAME "adm5120-flash"
-#define DRV_DESC "ADM5120 flash MAP driver"
-#define MAX_PARSED_PARTS 8
-
-#ifdef ADM5120_FLASH_DEBUG
-#define MAP_DBG(m, f, a...) printk(KERN_INFO "%s: " f, (m->name) , ## a)
-#else
-#define MAP_DBG(m, f, a...) do {} while (0)
-#endif
-#define MAP_ERR(m, f, a...) printk(KERN_ERR "%s: " f, (m->name) , ## a)
-#define MAP_INFO(m, f, a...) printk(KERN_INFO "%s: " f, (m->name) , ## a)
-
-struct adm5120_map_info {
- struct map_info map;
- void (*switch_bank)(unsigned);
- unsigned long window_size;
-};
-
-struct adm5120_flash_info {
- struct mtd_info *mtd;
- struct resource *res;
- struct platform_device *dev;
- struct adm5120_map_info amap;
-#ifdef CONFIG_MTD_PARTITIONS
- int nr_parts;
- struct mtd_partition *parts[MAX_PARSED_PARTS];
-#endif
-};
-
-struct flash_desc {
- u32 phys;
- u32 srs_shift;
-};
-
-/*
- * Globals
- */
-static DEFINE_SPINLOCK(adm5120_flash_spin);
-#define FLASH_LOCK() spin_lock(&adm5120_flash_spin)
-#define FLASH_UNLOCK() spin_unlock(&adm5120_flash_spin)
-
-static u32 flash_bankwidths[4] = { 1, 2, 4, 0 };
-
-static u32 flash_sizes[8] = {
- 0, 512*1024, 1024*1024, 2*1024*1024,
- 4*1024*1024, 0, 0, 0
-};
-
-static struct flash_desc flash_descs[2] = {
- {
- .phys = ADM5120_SRAM0_BASE,
- .srs_shift = MEMCTRL_SRS0_SHIFT,
- }, {
- .phys = ADM5120_SRAM1_BASE,
- .srs_shift = MEMCTRL_SRS1_SHIFT,
- }
-};
-
-static const char *probe_types[] = {
- "cfi_probe",
- "jedec_probe",
- "map_rom",
- NULL
-};
-
-#ifdef CONFIG_MTD_PARTITIONS
-static const char *parse_types[] = {
- "cmdlinepart",
-#ifdef CONFIG_MTD_REDBOOT_PARTS
- "RedBoot",
-#endif
-#ifdef CONFIG_MTD_MYLOADER_PARTS
- "MyLoader",
-#endif
-};
-#endif
-
-#define BANK_SIZE (2<<20)
-#define BANK_SIZE_MAX (4<<20)
-#define BANK_OFFS_MASK (BANK_SIZE-1)
-#define BANK_START_MASK (~BANK_OFFS_MASK)
-
-static inline struct adm5120_map_info *map_to_amap(struct map_info *map)
-{
- return (struct adm5120_map_info *)map;
-}
-
-static void adm5120_flash_switchbank(struct map_info *map,
- unsigned long ofs)
-{
- struct adm5120_map_info *amap = map_to_amap(map);
- unsigned bank;
-
- if (amap->switch_bank == NULL)
- return;
-
- bank = (ofs & BANK_START_MASK) >> 21;
- if (bank > 1)
- BUG();
-
- MAP_DBG(map, "switching to bank %u, ofs=%lX\n", bank, ofs);
- amap->switch_bank(bank);
-}
-
-static map_word adm5120_flash_read(struct map_info *map, unsigned long ofs)
-{
- struct adm5120_map_info *amap = map_to_amap(map);
- map_word ret;
-
- MAP_DBG(map, "reading from ofs %lX\n", ofs);
-
- if (ofs >= amap->window_size)
- return map_word_ff(map);
-
- FLASH_LOCK();
- adm5120_flash_switchbank(map, ofs);
- ret = inline_map_read(map, (ofs & (amap->window_size-1)));
- FLASH_UNLOCK();
-
- return ret;
-}
-
-static void adm5120_flash_write(struct map_info *map, const map_word datum,
- unsigned long ofs)
-{
- struct adm5120_map_info *amap = map_to_amap(map);
-
- MAP_DBG(map, "writing to ofs %lX\n", ofs);
-
- if (ofs > amap->window_size)
- return;
-
- FLASH_LOCK();
- adm5120_flash_switchbank(map, ofs);
- inline_map_write(map, datum, (ofs & (amap->window_size-1)));
- FLASH_UNLOCK();
-}
-
-static void adm5120_flash_copy_from(struct map_info *map, void *to,
- unsigned long from, ssize_t len)
-{
- struct adm5120_map_info *amap = map_to_amap(map);
- char *p;
- ssize_t t;
-
- MAP_DBG(map, "copy_from, to=%lX, from=%lX, len=%lX\n",
- (unsigned long)to, from, (unsigned long)len);
-
- if (from > amap->window_size)
- return;
-
- p = (char *)to;
- while (len > 0) {
- t = len;
- if ((from < BANK_SIZE) && ((from+len) > BANK_SIZE))
- t = BANK_SIZE-from;
-
- FLASH_LOCK();
- MAP_DBG(map, "copying %lu byte(s) from %lX to %lX\n",
- (unsigned long)t, (from & (amap->window_size-1)),
- (unsigned long)p);
- adm5120_flash_switchbank(map, from);
- inline_map_copy_from(map, p, (from & (amap->window_size-1)), t);
- FLASH_UNLOCK();
- p += t;
- from += t;
- len -= t;
- }
-}
-
-static int adm5120_flash_initres(struct adm5120_flash_info *info)
-{
- struct map_info *map = &info->amap.map;
- int err = 0;
-
- info->res = request_mem_region(map->phys, info->amap.window_size,
- map->name);
- if (info->res == NULL) {
- MAP_ERR(map, "could not reserve memory region\n");
- err = -ENOMEM;
- goto out;
- }
-
- map->virt = ioremap_nocache(map->phys, info->amap.window_size);
- if (map->virt == NULL) {
- MAP_ERR(map, "failed to ioremap flash region\n");
- err = -ENOMEM;
- goto out;
- }
-
-out:
- return err;
-}
-
-static int adm5120_flash_initinfo(struct adm5120_flash_info *info,
- struct platform_device *dev)
-{
- struct map_info *map = &info->amap.map;
- struct adm5120_flash_platform_data *pdata = dev->dev.platform_data;
- struct flash_desc *fdesc;
- u32 t = 0;
-
- map->name = dev->dev.bus_id;
-
- if (dev->id > 1) {
- MAP_ERR(map, "invalid flash id\n");
- goto err_out;
- }
-
- fdesc = &flash_descs[dev->id];
-
- if (pdata)
- info->amap.window_size = pdata->window_size;
-
- if (info->amap.window_size == 0) {
- /* get memory window size */
- t = SW_READ_REG(SWITCH_REG_MEMCTRL) >> fdesc->srs_shift;
- t &= MEMCTRL_SRS_MASK;
- info->amap.window_size = flash_sizes[t];
- }
-
- if (info->amap.window_size == 0) {
- MAP_ERR(map, "unable to determine window size\n");
- goto err_out;
- }
-
- /* get flash bus width */
- switch (dev->id) {
- case 0:
- t = MPMC_READ_REG(SC1) & SC_MW_MASK;
- break;
- case 1:
- t = MPMC_READ_REG(SC0) & SC_MW_MASK;
- break;
- }
- map->bankwidth = flash_bankwidths[t];
- if (map->bankwidth == 0) {
- MAP_ERR(map, "invalid bus width detected\n");
- goto err_out;
- }
-
- map->phys = fdesc->phys;
- map->size = BANK_SIZE_MAX;
-
- simple_map_init(map);
- map->read = adm5120_flash_read;
- map->write = adm5120_flash_write;
- map->copy_from = adm5120_flash_copy_from;
-
- if (pdata) {
- map->set_vpp = pdata->set_vpp;
- info->amap.switch_bank = pdata->switch_bank;
- }
-
- info->dev = dev;
-
- MAP_INFO(map, "probing at 0x%lX, size:%ldKiB, width:%d bits\n",
- (unsigned long)map->phys,
- (unsigned long)info->amap.window_size >> 10,
- map->bankwidth*8);
-
- return 0;
-
-err_out:
- return -ENODEV;
-}
-
-static void adm5120_flash_initbanks(struct adm5120_flash_info *info)
-{
- struct map_info *map = &info->amap.map;
-
- if (info->mtd->size <= BANK_SIZE)
- /* no bank switching needed */
- return;
-
- if (info->amap.switch_bank) {
- info->amap.window_size = info->mtd->size;
- return;
- }
-
- MAP_ERR(map, "reduce visibility from %ldKiB to %ldKiB\n",
- (unsigned long)map->size >> 10,
- (unsigned long)info->mtd->size >> 10);
-
- info->mtd->size = info->amap.window_size;
-}
-
-#ifdef CONFIG_MTD_PARTITIONS
-static int adm5120_flash_initparts(struct adm5120_flash_info *info)
-{
- struct adm5120_flash_platform_data *pdata;
- struct map_info *map = &info->amap.map;
- int num_parsers;
- const char *parser[2];
- int err = 0;
- int nr_parts;
- int i;
-
- info->nr_parts = 0;
-
- pdata = info->dev->dev.platform_data;
- if (pdata == NULL)
- goto out;
-
- if (pdata->nr_parts) {
- MAP_INFO(map, "adding static partitions\n");
- err = add_mtd_partitions(info->mtd, pdata->parts,
- pdata->nr_parts);
- if (err == 0) {
- info->nr_parts += pdata->nr_parts;
- goto out;
- }
- }
-
- num_parsers = ARRAY_SIZE(parse_types);
- if (num_parsers > MAX_PARSED_PARTS)
- num_parsers = MAX_PARSED_PARTS;
-
- parser[1] = NULL;
- for (i = 0; i < num_parsers; i++) {
- parser[0] = parse_types[i];
-
- MAP_INFO(map, "parsing \"%s\" partitions\n",
- parser[0]);
- nr_parts = parse_mtd_partitions(info->mtd, parser,
- &info->parts[i], 0);
-
- if (nr_parts <= 0)
- continue;
-
- MAP_INFO(map, "adding \"%s\" partitions\n",
- parser[0]);
-
- err = add_mtd_partitions(info->mtd, info->parts[i], nr_parts);
- if (err)
- break;
-
- info->nr_parts += nr_parts;
- }
-out:
- return err;
-}
-#else
-static int adm5120_flash_initparts(struct adm5120_flash_info *info)
-{
- return 0;
-}
-#endif /* CONFIG_MTD_PARTITIONS */
-
-#ifdef CONFIG_MTD_PARTITIONS
-static void adm5120_flash_remove_mtd(struct adm5120_flash_info *info)
-{
- int i;
-
- if (info->nr_parts) {
- del_mtd_partitions(info->mtd);
- for (i = 0; i < MAX_PARSED_PARTS; i++)
- if (info->parts[i] != NULL)
- kfree(info->parts[i]);
- } else {
- del_mtd_device(info->mtd);
- }
-}
-#else
-static void adm5120_flash_remove_mtd(struct adm5120_flash_info *info)
-{
- del_mtd_device(info->mtd);
-}
-#endif
-
-static int adm5120_flash_remove(struct platform_device *dev)
-{
- struct adm5120_flash_info *info;
-
- info = platform_get_drvdata(dev);
- if (info == NULL)
- return 0;
-
- platform_set_drvdata(dev, NULL);
-
- if (info->mtd != NULL) {
- adm5120_flash_remove_mtd(info);
- map_destroy(info->mtd);
- }
-
- if (info->amap.map.virt != NULL)
- iounmap(info->amap.map.virt);
-
- if (info->res != NULL) {
- release_resource(info->res);
- kfree(info->res);
- }
-
- return 0;
-}
-
-static int adm5120_flash_probe(struct platform_device *dev)
-{
- struct adm5120_flash_info *info;
- struct map_info *map;
- const char **probe_type;
- int err;
-
- info = kzalloc(sizeof(*info), GFP_KERNEL);
- if (info == NULL) {
- err = -ENOMEM;
- goto err_out;
- }
-
- platform_set_drvdata(dev, info);
-
- err = adm5120_flash_initinfo(info, dev);
- if (err)
- goto err_out;
-
- err = adm5120_flash_initres(info);
- if (err)
- goto err_out;
-
- map = &info->amap.map;
- for (probe_type = probe_types; info->mtd == NULL && *probe_type != NULL;
- probe_type++)
- info->mtd = do_map_probe(*probe_type, map);
-
- if (info->mtd == NULL) {
- MAP_ERR(map, "map_probe failed\n");
- err = -ENXIO;
- goto err_out;
- }
-
- adm5120_flash_initbanks(info);
-
- if (info->mtd->size < info->amap.window_size) {
- /* readjust resources */
- iounmap(map->virt);
- release_resource(info->res);
- kfree(info->res);
-
- info->amap.window_size = info->mtd->size;
- map->size = info->mtd->size;
- MAP_INFO(map, "reducing map size to %ldKiB\n",
- (unsigned long)map->size >> 10);
- err = adm5120_flash_initres(info);
- if (err)
- goto err_out;
- }
-
- MAP_INFO(map, "found at 0x%lX, size:%ldKiB, width:%d bits\n",
- (unsigned long)map->phys, (unsigned long)info->mtd->size >> 10,
- map->bankwidth*8);
-
- info->mtd->owner = THIS_MODULE;
-
- err = adm5120_flash_initparts(info);
- if (err)
- goto err_out;
-
- if (info->nr_parts == 0) {
- MAP_INFO(map, "no partitions available, registering "
- "whole flash\n");
- add_mtd_device(info->mtd);
- }
-
- return 0;
-
-err_out:
- adm5120_flash_remove(dev);
- return err;
-}
-
-#ifdef CONFIG_PM
-static int adm5120_flash_suspend(struct platform_device *dev,
- pm_message_t state)
-{
- struct adm5120_flash_info *info = platform_get_drvdata(dev);
- int ret = 0;
-
- if (info)
- ret = info->mtd->suspend(info->mtd);
-
- return ret;
-}
-
-static int adm5120_flash_resume(struct platform_device *dev)
-{
- struct adm5120_flash_info *info = platform_get_drvdata(dev);
-
- if (info)
- info->mtd->resume(info->mtd);
-
- return 0;
-}
-
-static void adm5120_flash_shutdown(struct platform_device *dev)
-{
- struct adm5120_flash_info *info = platform_get_drvdata(dev);
-
- if (info && info->mtd->suspend(info->mtd) == 0)
- info->mtd->resume(info->mtd);
-}
-#endif
-
-static struct platform_driver adm5120_flash_driver = {
- .probe = adm5120_flash_probe,
- .remove = adm5120_flash_remove,
-#ifdef CONFIG_PM
- .suspend = adm5120_flash_suspend,
- .resume = adm5120_flash_resume,
- .shutdown = adm5120_flash_shutdown,
-#endif
- .driver = {
- .name = DRV_NAME,
- },
-};
-
-static int __init adm5120_flash_init(void)
-{
- int err;
-
- err = platform_driver_register(&adm5120_flash_driver);
-
- return err;
-}
-
-static void __exit adm5120_flash_exit(void)
-{
- platform_driver_unregister(&adm5120_flash_driver);
-}
-
-module_init(adm5120_flash_init);
-module_exit(adm5120_flash_exit);
-
-MODULE_LICENSE("GPL v2");
-MODULE_AUTHOR("Gabor Juhos <juhosg at openwrt.org>");
-MODULE_DESCRIPTION(DRV_DESC);
diff --git a/target/linux/adm5120/files/drivers/mtd/myloader.c b/target/linux/adm5120/files/drivers/mtd/myloader.c
deleted file mode 100644
index 9dab9d18da..0000000000
--- a/target/linux/adm5120/files/drivers/mtd/myloader.c
+++ /dev/null
@@ -1,167 +0,0 @@
-/*
- * $Id$
- *
- * Parse MyLoader-style flash partition tables and produce a Linux partition
- * array to match.
- *
- * Copyright (C) 2007 OpenWrt.org
- * Copyright (C) 2007 Gabor Juhos <juhosg at openwrt.org>
- *
- * This file was based on drivers/mtd/redboot.c
- * Author: Red Hat, Inc. - David Woodhouse <dwmw2@cambridge.redhat.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/slab.h>
-#include <linux/init.h>
-#include <linux/vmalloc.h>
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-
-#include <linux/byteorder/generic.h>
-
-#include <prom/myloader.h>
-
-#define NAME_LEN_MAX 20
-#define NAME_MYLOADER "MyLoader"
-#define NAME_PARTITION_TABLE "Partition Table"
-#define BLOCK_LEN_MIN 0x10000
-
-int parse_myloader_partitions(struct mtd_info *master,
- struct mtd_partition **pparts,
- unsigned long origin)
-{
- struct mylo_partition_table *tab;
- struct mylo_partition *part;
- struct mtd_partition *mtd_parts;
- struct mtd_partition *mtd_part;
- int num_parts;
- int ret, i;
- size_t retlen;
- char *names;
- unsigned long offset;
- unsigned long blocklen;
-
- tab = vmalloc(sizeof(*tab));
- if (!tab) {
- return -ENOMEM;
- goto out;
- }
-
- blocklen = master->erasesize;
- if (blocklen < BLOCK_LEN_MIN)
- blocklen = BLOCK_LEN_MIN;
-
- /* Partition Table is always located on the second erase block */
- offset = blocklen;
- printk(KERN_NOTICE "%s: searching for MyLoader partition table at "
- "offset 0x%lx\n", master->name, offset);
-
- ret = master->read(master, offset, sizeof(*tab), &retlen, (void *)tab);
- if (ret)
- goto out;
-
- if (retlen != sizeof(*tab)) {
- ret = -EIO;
- goto out_free_buf;
- }
-
- /* Check for Partition Table magic number */
- if (tab->magic != le32_to_cpu(MYLO_MAGIC_PARTITIONS)) {
- printk(KERN_NOTICE "%s: no MyLoader partition table found\n",
- master->name);
- ret = 0;
- goto out_free_buf;
- }
-
- /* The MyLoader and the Partition Table is always present */
- num_parts = 2;
-
- /* Detect number of used partitions */
- for (i = 0; i < MYLO_MAX_PARTITIONS; i++) {
- part = &tab->partitions[i];
-
- if (le16_to_cpu(part->type) == PARTITION_TYPE_FREE)
- continue;
-
- num_parts++;
- }
-
- mtd_parts = kzalloc((num_parts * sizeof(*mtd_part) +
- num_parts * NAME_LEN_MAX), GFP_KERNEL);
-
- if (!mtd_parts) {
- ret = -ENOMEM;
- goto out_free_buf;
- }
-
- mtd_part = mtd_parts;
- names = (char *)&mtd_parts[num_parts];
-
- strncpy(names, NAME_MYLOADER, NAME_LEN_MAX-1);
- mtd_part->name = names;
- mtd_part->offset = 0;
- mtd_part->size = blocklen;
- mtd_part->mask_flags = MTD_WRITEABLE;
- mtd_part++;
- names += NAME_LEN_MAX;
-
- strncpy(names, NAME_PARTITION_TABLE, NAME_LEN_MAX-1);
- mtd_part->name = names;
- mtd_part->offset = blocklen;
- mtd_part->size = blocklen;
- mtd_part->mask_flags = MTD_WRITEABLE;
- mtd_part++;
- names += NAME_LEN_MAX;
-
- for (i = 0; i < MYLO_MAX_PARTITIONS; i++) {
- part = &tab->partitions[i];
-
- if (le16_to_cpu(part->type) == PARTITION_TYPE_FREE)
- continue;
-
- sprintf(names, "partition%d", i);
- mtd_part->offset = le32_to_cpu(part->addr);
- mtd_part->size = le32_to_cpu(part->size);
- mtd_part->name = names;
- mtd_part++;
- names += NAME_LEN_MAX;
- }
-
- *pparts = mtd_parts;
- ret = num_parts;
-
-out_free_buf:
- vfree(tab);
-out:
- return ret;
-}
-
-static struct mtd_part_parser mylo_mtd_parser = {
- .owner = THIS_MODULE,
- .parse_fn = parse_myloader_partitions,
- .name = NAME_MYLOADER,
-};
-
-static int __init mylo_mtd_parser_init(void)
-{
- return register_mtd_parser(&mylo_mtd_parser);
-}
-
-static void __exit mylo_mtd_parser_exit(void)
-{
- deregister_mtd_parser(&mylo_mtd_parser);
-}
-
-module_init(mylo_mtd_parser_init);
-module_exit(mylo_mtd_parser_exit);
-
-MODULE_AUTHOR("Gabor Juhos <juhosg at openwrt.org>");
-MODULE_DESCRIPTION("Parsing code for MyLoader partition tables");
-MODULE_LICENSE("GPL v2");
diff --git a/target/linux/adm5120/files/drivers/mtd/trxsplit.c b/target/linux/adm5120/files/drivers/mtd/trxsplit.c
deleted file mode 100644
index 49eb0f979e..0000000000
--- a/target/linux/adm5120/files/drivers/mtd/trxsplit.c
+++ /dev/null
@@ -1,220 +0,0 @@
-/*
- * $Id$
- *
- * Copyright (C) 2007 OpenWrt.org
- * Copyright (C) Gabor Juhos <juhosg at openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- *
- */
-
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/slab.h>
-#include <linux/list.h>
-#include <linux/kmod.h>
-#include <linux/root_dev.h>
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-
-#include <linux/byteorder/generic.h>
-
-#define PFX "trxsplit: "
-
-#define TRX_MAGIC 0x30524448 /* "HDR0" */
-#define TRX_VERSION 1
-#define TRX_MAX_LEN 0x3A0000
-#define TRX_NO_HEADER 0x1 /* do not write TRX header */
-#define TRX_GZ_FILES 0x2 /* contains individual gzip files */
-#define TRX_MAX_OFFSET 3
-#define TRX_MIN_KERNEL_SIZE 256*1024
-
-struct trx_header {
- u32 magic; /* "HDR0" */
- u32 len; /* Length of file including header */
- u32 crc32; /* 32-bit CRC from flag_version to end of file */
- u32 flag_version; /* 0:15 flags, 16:31 version */
- u32 offsets[TRX_MAX_OFFSET]; /* Offsets of partitions */
-};
-
-#define TRX_ALIGN 0x1000
-
-static int trx_nr_parts;
-static unsigned long trx_offset;
-static struct mtd_info *trx_mtd;
-static struct mtd_partition trx_parts[TRX_MAX_OFFSET];
-static struct trx_header trx_hdr;
-
-static int trxsplit_refresh_partitions(struct mtd_info *mtd);
-
-static int trxsplit_checktrx(struct mtd_info *mtd, unsigned long offset)
-{
- size_t retlen;
- int err;
-
- err = mtd->read(mtd, offset, sizeof(trx_hdr), &retlen,
- (void *)&trx_hdr);
- if (err) {
- printk(KERN_ALERT PFX "unable to read from '%s'\n", mtd->name);
- goto err_out;
- }
-
- if (retlen != sizeof(trx_hdr)) {
- printk(KERN_ALERT PFX "reading failed on '%s'\n", mtd->name);
- goto err_out;
- }
-
- trx_hdr.magic = le32_to_cpu(trx_hdr.magic);
- trx_hdr.len = le32_to_cpu(trx_hdr.len);
- trx_hdr.crc32 = le32_to_cpu(trx_hdr.crc32);
- trx_hdr.flag_version = le32_to_cpu(trx_hdr.flag_version);
- trx_hdr.offsets[0] = le32_to_cpu(trx_hdr.offsets[0]);
- trx_hdr.offsets[1] = le32_to_cpu(trx_hdr.offsets[1]);
- trx_hdr.offsets[2] = le32_to_cpu(trx_hdr.offsets[2]);
-
- /* sanity checks */
- if (trx_hdr.magic != TRX_MAGIC)
- goto err_out;
-
- if (trx_hdr.len > mtd->size - offset)
- goto err_out;
-
- /* TODO: add crc32 checking too? */
-
- return 0;
-
-err_out:
- return -1;
-}
-
-static void trxsplit_findtrx(struct mtd_info *mtd)
-{
- unsigned long offset;
- int err;
-
- printk(KERN_INFO PFX "searching TRX header in '%s'\n", mtd->name);
-
- err = 0;
- for (offset = 0; offset < mtd->size; offset += TRX_ALIGN) {
- err = trxsplit_checktrx(mtd, offset);
- if (err == 0)
- break;
- }
-
- if (err)
- return;
-
- printk(KERN_INFO PFX "TRX header found at 0x%lX\n", offset);
-
- trx_mtd = mtd;
- trx_offset = offset;
-}
-
-static void trxsplit_create_partitions(struct mtd_info *mtd)
-{
- struct mtd_partition *part = trx_parts;
- int err;
- int i;
-
- for (i = 0; i < TRX_MAX_OFFSET; i++) {
- part = &trx_parts[i];
- if (trx_hdr.offsets[i] == 0)
- continue;
- part->offset = trx_offset + trx_hdr.offsets[i];
- trx_nr_parts++;
- }
-
- for (i = 0; i < trx_nr_parts-1; i++)
- trx_parts[i].size = trx_parts[i+1].offset - trx_parts[i].offset;
-
- trx_parts[i].size = mtd->size - trx_parts[i].offset;
-
- i = 0;
- part = &trx_parts[i];
- if (part->size < TRX_MIN_KERNEL_SIZE) {
- part->name = "loader";
- i++;
- }
-
- part = &trx_parts[i];
- part->name = "kernel";
- i++;
-
- part = &trx_parts[i];
- part->name = "rootfs";
-
- err = add_mtd_partitions(mtd, trx_parts, trx_nr_parts);
- if (err) {
- printk(KERN_ALERT PFX "adding TRX partitions failed\n");
- return;
- }
-
- mtd->refresh_device = trxsplit_refresh_partitions;
-}
-
-static int trxsplit_refresh_partitions(struct mtd_info *mtd)
-{
- printk(KERN_INFO PFX "refreshing TRX partitions in '%s' (%d,%d)\n",
- mtd->name, MTD_BLOCK_MAJOR, mtd->index);
-
- /* remove old partitions */
- del_mtd_partitions(mtd);
-
- trxsplit_findtrx(mtd);
- if (!trx_mtd)
- goto err;
-
- trxsplit_create_partitions(trx_mtd);
- return 1;
-
-err:
- return 0;
-}
-
-static void __init trxsplit_add_mtd(struct mtd_info *mtd)
-{
- if (mtd->type != MTD_NORFLASH) {
- printk(KERN_INFO PFX "'%s' is not a NOR flash, skipped\n",
- mtd->name);
- return;
- }
-
- if (!trx_mtd)
- trxsplit_findtrx(mtd);
-}
-
-static void __init trxsplit_remove_mtd(struct mtd_info *mtd)
-{
- /* nothing to do */
-}
-
-static struct mtd_notifier trxsplit_notifier __initdata = {
- .add = trxsplit_add_mtd,
- .remove = trxsplit_remove_mtd,
-};
-
-static void __init trxsplit_scan(void)
-{
- register_mtd_user(&trxsplit_notifier);
- unregister_mtd_user(&trxsplit_notifier);
-}
-
-static int __init trxsplit_init(void)
-{
- trxsplit_scan();
-
- if (trx_mtd) {
- printk(KERN_INFO PFX "creating TRX partitions in '%s' "
- "(%d,%d)\n", trx_mtd->name, MTD_BLOCK_MAJOR,
- trx_mtd->index);
- trxsplit_create_partitions(trx_mtd);
- }
-
- return 0;
-}
-
-late_initcall(trxsplit_init);
diff --git a/target/linux/adm5120/files/drivers/net/adm5120sw.c b/target/linux/adm5120/files/drivers/net/adm5120sw.c
deleted file mode 100644
index 8f3610e907..0000000000
--- a/target/linux/adm5120/files/drivers/net/adm5120sw.c
+++ /dev/null
@@ -1,1205 +0,0 @@
-/*
- * ADM5120 built-in ethernet switch driver
- *
- * Copyright (C) 2007,2008 Gabor Juhos <juhosg at openwrt.org>
- *
- * This code was based on a driver for Linux 2.6.xx by Jeroen Vreeken.
- * Copyright Jeroen Vreeken (pe1rxq@amsat.org), 2005
- * NAPI extension for the Jeroen's driver
- * Copyright Thomas Langer (Thomas.Langer@infineon.com), 2007
- * Copyright Friedrich Beckmann (Friedrich.Beckmann@infineon.com), 2007
- * Inspiration for the Jeroen's driver came from the ADMtek 2.4 driver.
- * Copyright ADMtek Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/errno.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/spinlock.h>
-#include <linux/platform_device.h>
-
-#include <linux/netdevice.h>
-#include <linux/etherdevice.h>
-#include <linux/skbuff.h>
-
-#include <linux/io.h>
-#include <linux/irq.h>
-
-#include <asm/mipsregs.h>
-
-#include <adm5120_info.h>
-#include <adm5120_defs.h>
-#include <adm5120_irq.h>
-#include <adm5120_switch.h>
-
-#include "adm5120sw.h"
-
-#define DRV_NAME "adm5120-switch"
-#define DRV_DESC "ADM5120 built-in ethernet switch driver"
-#define DRV_VERSION "0.1.1"
-
-#define CONFIG_ADM5120_SWITCH_NAPI 1
-#undef CONFIG_ADM5120_SWITCH_DEBUG
-
-/* ------------------------------------------------------------------------ */
-
-#ifdef CONFIG_ADM5120_SWITCH_DEBUG
-#define SW_DBG(f, a...) printk(KERN_DBG "%s: " f, DRV_NAME , ## a)
-#else
-#define SW_DBG(f, a...) do {} while (0)
-#endif
-#define SW_ERR(f, a...) printk(KERN_ERR "%s: " f, DRV_NAME , ## a)
-#define SW_INFO(f, a...) printk(KERN_INFO "%s: " f, DRV_NAME , ## a)
-
-#define SWITCH_NUM_PORTS 6
-#define ETH_CSUM_LEN 4
-
-#define RX_MAX_PKTLEN 1550
-#define RX_RING_SIZE 64
-
-#define TX_RING_SIZE 32
-#define TX_QUEUE_LEN 28 /* Limit ring entries actually used. */
-#define TX_TIMEOUT HZ*400
-
-#define RX_DESCS_SIZE (RX_RING_SIZE * sizeof(struct dma_desc *))
-#define RX_SKBS_SIZE (RX_RING_SIZE * sizeof(struct sk_buff *))
-#define TX_DESCS_SIZE (TX_RING_SIZE * sizeof(struct dma_desc *))
-#define TX_SKBS_SIZE (TX_RING_SIZE * sizeof(struct sk_buff *))
-
-#define SKB_ALLOC_LEN (RX_MAX_PKTLEN + 32)
-#define SKB_RESERVE_LEN (NET_IP_ALIGN + NET_SKB_PAD)
-
-#define SWITCH_INTS_HIGH (SWITCH_INT_SHD | SWITCH_INT_RHD | SWITCH_INT_HDF)
-#define SWITCH_INTS_LOW (SWITCH_INT_SLD | SWITCH_INT_RLD | SWITCH_INT_LDF)
-#define SWITCH_INTS_ERR (SWITCH_INT_RDE | SWITCH_INT_SDE | SWITCH_INT_CPUH)
-#define SWITCH_INTS_Q (SWITCH_INT_P0QF | SWITCH_INT_P1QF | SWITCH_INT_P2QF | \
- SWITCH_INT_P3QF | SWITCH_INT_P4QF | SWITCH_INT_P5QF | \
- SWITCH_INT_CPQF | SWITCH_INT_GQF)
-
-#define SWITCH_INTS_ALL (SWITCH_INTS_HIGH | SWITCH_INTS_LOW | \
- SWITCH_INTS_ERR | SWITCH_INTS_Q | \
- SWITCH_INT_MD | SWITCH_INT_PSC)
-
-#define SWITCH_INTS_USED (SWITCH_INTS_LOW | SWITCH_INT_PSC)
-#define SWITCH_INTS_POLL (SWITCH_INT_RLD | SWITCH_INT_LDF | SWITCH_INT_SLD)
-
-/* ------------------------------------------------------------------------ */
-
-struct adm5120_if_priv {
- struct net_device *dev;
-
- unsigned int vlan_no;
- unsigned int port_mask;
-
-#ifdef CONFIG_ADM5120_SWITCH_NAPI
- struct napi_struct napi;
-#endif
-};
-
-struct dma_desc {
- __u32 buf1;
-#define DESC_OWN (1UL << 31) /* Owned by the switch */
-#define DESC_EOR (1UL << 28) /* End of Ring */
-#define DESC_ADDR_MASK 0x1FFFFFF
-#define DESC_ADDR(x) ((__u32)(x) & DESC_ADDR_MASK)
- __u32 buf2;
-#define DESC_BUF2_EN (1UL << 31) /* Buffer 2 enable */
- __u32 buflen;
- __u32 misc;
-/* definitions for tx/rx descriptors */
-#define DESC_PKTLEN_SHIFT 16
-#define DESC_PKTLEN_MASK 0x7FF
-/* tx descriptor specific part */
-#define DESC_CSUM (1UL << 31) /* Append checksum */
-#define DESC_DSTPORT_SHIFT 8
-#define DESC_DSTPORT_MASK 0x3F
-#define DESC_VLAN_MASK 0x3F
-/* rx descriptor specific part */
-#define DESC_SRCPORT_SHIFT 12
-#define DESC_SRCPORT_MASK 0x7
-#define DESC_DA_MASK 0x3
-#define DESC_DA_SHIFT 4
-#define DESC_IPCSUM_FAIL (1UL << 3) /* IP checksum fail */
-#define DESC_VLAN_TAG (1UL << 2) /* VLAN tag present */
-#define DESC_TYPE_MASK 0x3 /* mask for Packet type */
-#define DESC_TYPE_IP 0x0 /* IP packet */
-#define DESC_TYPE_PPPoE 0x1 /* PPPoE packet */
-} __attribute__ ((aligned(16)));
-
-/* ------------------------------------------------------------------------ */
-
-static int adm5120_nrdevs;
-
-static struct net_device *adm5120_devs[SWITCH_NUM_PORTS];
-/* Lookup table port -> device */
-static struct net_device *adm5120_port[SWITCH_NUM_PORTS];
-
-static struct dma_desc *txl_descs;
-static struct dma_desc *rxl_descs;
-
-static dma_addr_t txl_descs_dma;
-static dma_addr_t rxl_descs_dma;
-
-static struct sk_buff **txl_skbuff;
-static struct sk_buff **rxl_skbuff;
-
-static unsigned int cur_rxl, dirty_rxl; /* producer/consumer ring indices */
-static unsigned int cur_txl, dirty_txl;
-
-static unsigned int sw_used;
-
-static spinlock_t tx_lock = SPIN_LOCK_UNLOCKED;
-
-/* ------------------------------------------------------------------------ */
-
-static inline u32 sw_read_reg(u32 reg)
-{
- return __raw_readl((void __iomem *)KSEG1ADDR(ADM5120_SWITCH_BASE)+reg);
-}
-
-static inline void sw_write_reg(u32 reg, u32 val)
-{
- __raw_writel(val, (void __iomem *)KSEG1ADDR(ADM5120_SWITCH_BASE)+reg);
-}
-
-static inline void sw_int_mask(u32 mask)
-{
- u32 t;
-
- t = sw_read_reg(SWITCH_REG_INT_MASK);
- t |= mask;
- sw_write_reg(SWITCH_REG_INT_MASK, t);
-}
-
-static inline void sw_int_unmask(u32 mask)
-{
- u32 t;
-
- t = sw_read_reg(SWITCH_REG_INT_MASK);
- t &= ~mask;
- sw_write_reg(SWITCH_REG_INT_MASK, t);
-}
-
-static inline void sw_int_ack(u32 mask)
-{
- sw_write_reg(SWITCH_REG_INT_STATUS, mask);
-}
-
-static inline u32 sw_int_status(void)
-{
- u32 t;
-
- t = sw_read_reg(SWITCH_REG_INT_STATUS);
- t &= ~sw_read_reg(SWITCH_REG_INT_MASK);
- return t;
-}
-
-static inline u32 desc_get_srcport(struct dma_desc *desc)
-{
- return (desc->misc >> DESC_SRCPORT_SHIFT) & DESC_SRCPORT_MASK;
-}
-
-static inline u32 desc_get_pktlen(struct dma_desc *desc)
-{
- return (desc->misc >> DESC_PKTLEN_SHIFT) & DESC_PKTLEN_MASK;
-}
-
-static inline int desc_ipcsum_fail(struct dma_desc *desc)
-{
- return ((desc->misc & DESC_IPCSUM_FAIL) != 0);
-}
-
-/* ------------------------------------------------------------------------ */
-
-static void sw_dump_desc(char *label, struct dma_desc *desc, int tx)
-{
- u32 t;
-
- SW_DBG("%s %s desc/%p\n", label, tx ? "tx" : "rx", desc);
-
- t = desc->buf1;
- SW_DBG(" buf1 %08X addr=%08X; len=%08X %s%s\n", t,
- t & DESC_ADDR_MASK,
- desc->buflen,
- (t & DESC_OWN) ? "SWITCH" : "CPU",
- (t & DESC_EOR) ? " RE" : "");
-
- t = desc->buf2;
- SW_DBG(" buf2 %08X addr=%08X%s\n", desc->buf2,
- t & DESC_ADDR_MASK,
- (t & DESC_BUF2_EN) ? " EN" : "" );
-
- t = desc->misc;
- if (tx)
- SW_DBG(" misc %08X%s pktlen=%04X ports=%02X vlan=%02X\n", t,
- (t & DESC_CSUM) ? " CSUM" : "",
- (t >> DESC_PKTLEN_SHIFT) & DESC_PKTLEN_MASK,
- (t >> DESC_DSTPORT_SHIFT) & DESC_DSTPORT_MASK,
- t & DESC_VLAN_MASK);
- else
- SW_DBG(" misc %08X pktlen=%04X port=%d DA=%d%s%s type=%d\n",
- t,
- (t >> DESC_PKTLEN_SHIFT) & DESC_PKTLEN_MASK,
- (t >> DESC_SRCPORT_SHIFT) & DESC_SRCPORT_MASK,
- (t >> DESC_DA_SHIFT) & DESC_DA_MASK,
- (t & DESC_IPCSUM_FAIL) ? " IPCF" : "",
- (t & DESC_VLAN_TAG) ? " VLAN" : "",
- (t & DESC_TYPE_MASK));
-}
-
-static void sw_dump_intr_mask(char *label, u32 mask)
-{
- SW_DBG("%s %08X%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s\n",
- label, mask,
- (mask & SWITCH_INT_SHD) ? " SHD" : "",
- (mask & SWITCH_INT_SLD) ? " SLD" : "",
- (mask & SWITCH_INT_RHD) ? " RHD" : "",
- (mask & SWITCH_INT_RLD) ? " RLD" : "",
- (mask & SWITCH_INT_HDF) ? " HDF" : "",
- (mask & SWITCH_INT_LDF) ? " LDF" : "",
- (mask & SWITCH_INT_P0QF) ? " P0QF" : "",
- (mask & SWITCH_INT_P1QF) ? " P1QF" : "",
- (mask & SWITCH_INT_P2QF) ? " P2QF" : "",
- (mask & SWITCH_INT_P3QF) ? " P3QF" : "",
- (mask & SWITCH_INT_P4QF) ? " P4QF" : "",
- (mask & SWITCH_INT_CPQF) ? " CPQF" : "",
- (mask & SWITCH_INT_GQF) ? " GQF" : "",
- (mask & SWITCH_INT_MD) ? " MD" : "",
- (mask & SWITCH_INT_BCS) ? " BCS" : "",
- (mask & SWITCH_INT_PSC) ? " PSC" : "",
- (mask & SWITCH_INT_ID) ? " ID" : "",
- (mask & SWITCH_INT_W0TE) ? " W0TE" : "",
- (mask & SWITCH_INT_W1TE) ? " W1TE" : "",
- (mask & SWITCH_INT_RDE) ? " RDE" : "",
- (mask & SWITCH_INT_SDE) ? " SDE" : "",
- (mask & SWITCH_INT_CPUH) ? " CPUH" : "");
-}
-
-static void sw_dump_regs(void)
-{
- u32 t;
-
- t = sw_read_reg(SWITCH_REG_PHY_STATUS);
- SW_DBG("phy_status: %08X\n", t);
-
- t = sw_read_reg(SWITCH_REG_CPUP_CONF);
- SW_DBG("cpup_conf: %08X%s%s%s\n", t,
- (t & CPUP_CONF_DCPUP) ? " DCPUP" : "",
- (t & CPUP_CONF_CRCP) ? " CRCP" : "",
- (t & CPUP_CONF_BTM) ? " BTM" : "");
-
- t = sw_read_reg(SWITCH_REG_PORT_CONF0);
- SW_DBG("port_conf0: %08X\n", t);
- t = sw_read_reg(SWITCH_REG_PORT_CONF1);
- SW_DBG("port_conf1: %08X\n", t);
- t = sw_read_reg(SWITCH_REG_PORT_CONF2);
- SW_DBG("port_conf2: %08X\n", t);
-
- t = sw_read_reg(SWITCH_REG_VLAN_G1);
- SW_DBG("vlan g1: %08X\n", t);
- t = sw_read_reg(SWITCH_REG_VLAN_G2);
- SW_DBG("vlan g2: %08X\n", t);
-
- t = sw_read_reg(SWITCH_REG_BW_CNTL0);
- SW_DBG("bw_cntl0: %08X\n", t);
- t = sw_read_reg(SWITCH_REG_BW_CNTL1);
- SW_DBG("bw_cntl1: %08X\n", t);
-
- t = sw_read_reg(SWITCH_REG_PHY_CNTL0);
- SW_DBG("phy_cntl0: %08X\n", t);
- t = sw_read_reg(SWITCH_REG_PHY_CNTL1);
- SW_DBG("phy_cntl1: %08X\n", t);
- t = sw_read_reg(SWITCH_REG_PHY_CNTL2);
- SW_DBG("phy_cntl2: %08X\n", t);
- t = sw_read_reg(SWITCH_REG_PHY_CNTL3);
- SW_DBG("phy_cntl3: %08X\n", t);
- t = sw_read_reg(SWITCH_REG_PHY_CNTL4);
- SW_DBG("phy_cntl4: %08X\n", t);
-
- t = sw_read_reg(SWITCH_REG_INT_STATUS);
- sw_dump_intr_mask("int_status: ", t);
-
- t = sw_read_reg(SWITCH_REG_INT_MASK);
- sw_dump_intr_mask("int_mask: ", t);
-
- t = sw_read_reg(SWITCH_REG_SHDA);
- SW_DBG("shda: %08X\n", t);
- t = sw_read_reg(SWITCH_REG_SLDA);
- SW_DBG("slda: %08X\n", t);
- t = sw_read_reg(SWITCH_REG_RHDA);
- SW_DBG("rhda: %08X\n", t);
- t = sw_read_reg(SWITCH_REG_RLDA);
- SW_DBG("rlda: %08X\n", t);
-}
-
-/* ------------------------------------------------------------------------ */
-
-static inline void adm5120_rx_dma_update(struct dma_desc *desc,
- struct sk_buff *skb, int end)
-{
- desc->misc = 0;
- desc->buf2 = 0;
- desc->buflen = RX_MAX_PKTLEN;
- desc->buf1 = DESC_ADDR(skb->data) |
- DESC_OWN | (end ? DESC_EOR : 0);
-}
-
-static void adm5120_switch_rx_refill(void)
-{
- unsigned int entry;
-
- for (; cur_rxl - dirty_rxl > 0; dirty_rxl++) {
- struct dma_desc *desc;
- struct sk_buff *skb;
-
- entry = dirty_rxl % RX_RING_SIZE;
- desc = &rxl_descs[entry];
-
- skb = rxl_skbuff[entry];
- if (skb == NULL) {
- skb = alloc_skb(SKB_ALLOC_LEN, GFP_ATOMIC);
- if (skb) {
- skb_reserve(skb, SKB_RESERVE_LEN);
- rxl_skbuff[entry] = skb;
- } else {
- SW_ERR("no memory for skb\n");
- desc->buflen = 0;
- desc->buf2 = 0;
- desc->misc = 0;
- desc->buf1 = (desc->buf1 & DESC_EOR) | DESC_OWN;
- break;
- }
- }
-
- desc->buf2 = 0;
- desc->buflen = RX_MAX_PKTLEN;
- desc->misc = 0;
- desc->buf1 = (desc->buf1 & DESC_EOR) | DESC_OWN |
- DESC_ADDR(skb->data);
- }
-}
-
-static int adm5120_switch_rx(int limit)
-{
- unsigned int done = 0;
-
- SW_DBG("rx start, limit=%d, cur_rxl=%u, dirty_rxl=%u\n",
- limit, cur_rxl, dirty_rxl);
-
- while (done < limit) {
- int entry = cur_rxl % RX_RING_SIZE;
- struct dma_desc *desc = &rxl_descs[entry];
- struct net_device *rdev;
- unsigned int port;
-
- if (desc->buf1 & DESC_OWN)
- break;
-
- if (dirty_rxl + RX_RING_SIZE == cur_rxl)
- break;
-
- port = desc_get_srcport(desc);
- rdev = adm5120_port[port];
-
- SW_DBG("rx descriptor %u, desc=%p, skb=%p\n", entry, desc,
- rxl_skbuff[entry]);
-
- if ((rdev) && netif_running(rdev)) {
- struct sk_buff *skb = rxl_skbuff[entry];
- int pktlen;
-
- pktlen = desc_get_pktlen(desc);
- pktlen -= ETH_CSUM_LEN;
-
- if ((pktlen == 0) || desc_ipcsum_fail(desc)) {
- rdev->stats.rx_errors++;
- if (pktlen == 0)
- rdev->stats.rx_length_errors++;
- if (desc_ipcsum_fail(desc))
- rdev->stats.rx_crc_errors++;
- SW_DBG("rx error, recycling skb %u\n", entry);
- } else {
- skb_put(skb, pktlen);
-
- skb->dev = rdev;
- skb->protocol = eth_type_trans(skb, rdev);
- skb->ip_summed = CHECKSUM_UNNECESSARY;
-
- dma_cache_wback_inv((unsigned long)skb->data,
- skb->len);
-
-#ifdef CONFIG_ADM5120_SWITCH_NAPI
- netif_receive_skb(skb);
-#else
- netif_rx(skb);
-#endif
-
- rdev->last_rx = jiffies;
- rdev->stats.rx_packets++;
- rdev->stats.rx_bytes += pktlen;
-
- rxl_skbuff[entry] = NULL;
- done++;
- }
- } else {
- SW_DBG("no rx device, recycling skb %u\n", entry);
- }
-
- cur_rxl++;
- if (cur_rxl - dirty_rxl > RX_RING_SIZE / 4)
- adm5120_switch_rx_refill();
- }
-
- adm5120_switch_rx_refill();
-
- SW_DBG("rx finished, cur_rxl=%u, dirty_rxl=%u, processed %d\n",
- cur_rxl, dirty_rxl, done);
-
- return done;
-}
-
-static void adm5120_switch_tx(void)
-{
- unsigned int entry;
-
- spin_lock(&tx_lock);
- entry = dirty_txl % TX_RING_SIZE;
- while (dirty_txl != cur_txl) {
- struct dma_desc *desc = &txl_descs[entry];
- struct sk_buff *skb = txl_skbuff[entry];
-
- if (desc->buf1 & DESC_OWN)
- break;
-
- if (netif_running(skb->dev)) {
- skb->dev->stats.tx_bytes += skb->len;
- skb->dev->stats.tx_packets++;
- }
-
- dev_kfree_skb_irq(skb);
- txl_skbuff[entry] = NULL;
- entry = (++dirty_txl) % TX_RING_SIZE;
- }
-
- if ((cur_txl - dirty_txl) < TX_QUEUE_LEN - 4) {
- int i;
- for (i = 0; i < SWITCH_NUM_PORTS; i++) {
- if (!adm5120_devs[i])
- continue;
- netif_wake_queue(adm5120_devs[i]);
- }
- }
- spin_unlock(&tx_lock);
-}
-
-#ifdef CONFIG_ADM5120_SWITCH_NAPI
-static int adm5120_if_poll(struct napi_struct *napi, int limit)
-{
- struct adm5120_if_priv *priv = container_of(napi,
- struct adm5120_if_priv, napi);
- struct net_device *dev = priv->dev;
- int done;
- u32 status;
-
- sw_int_ack(SWITCH_INTS_POLL);
-
- SW_DBG("%s: processing TX ring\n", dev->name);
- adm5120_switch_tx();
-
- SW_DBG("%s: processing RX ring\n", dev->name);
- done = adm5120_switch_rx(limit);
-
- status = sw_int_status() & SWITCH_INTS_POLL;
- if ((done < limit) && (!status)) {
- SW_DBG("disable polling mode for %s\n", dev->name);
- netif_rx_complete(dev, napi);
- sw_int_unmask(SWITCH_INTS_POLL);
- return 0;
- }
-
- SW_DBG("%s still in polling mode, done=%d, status=%x\n",
- dev->name, done, status);
- return 1;
-}
-#endif /* CONFIG_ADM5120_SWITCH_NAPI */
-
-
-static irqreturn_t adm5120_switch_irq(int irq, void *dev_id)
-{
- u32 status;
-
- status = sw_int_status();
- status &= SWITCH_INTS_ALL;
- if (!status)
- return IRQ_NONE;
-
-#ifdef CONFIG_ADM5120_SWITCH_NAPI
- sw_int_ack(status & ~SWITCH_INTS_POLL);
-
- if (status & SWITCH_INTS_POLL) {
- struct net_device *dev = dev_id;
- struct adm5120_if_priv *priv = netdev_priv(dev);
-
- sw_dump_intr_mask("poll ints", status);
- SW_DBG("enable polling mode for %s\n", dev->name);
- sw_int_mask(SWITCH_INTS_POLL);
- netif_rx_schedule(dev, &priv->napi);
- }
-#else
- sw_int_ack(status);
-
- if (status & (SWITCH_INT_RLD | SWITCH_INT_LDF)) {
- adm5120_switch_rx(RX_RING_SIZE);
- }
-
- if (status & SWITCH_INT_SLD) {
- adm5120_switch_tx();
- }
-#endif
-
- return IRQ_HANDLED;
-}
-
-static void adm5120_set_bw(char *matrix)
-{
- unsigned long val;
-
- /* Port 0 to 3 are set using the bandwidth control 0 register */
- val = matrix[0] + (matrix[1]<<8) + (matrix[2]<<16) + (matrix[3]<<24);
- sw_write_reg(SWITCH_REG_BW_CNTL0, val);
-
- /* Port 4 and 5 are set using the bandwidth control 1 register */
- val = matrix[4];
- if (matrix[5] == 1)
- sw_write_reg(SWITCH_REG_BW_CNTL1, val | 0x80000000);
- else
- sw_write_reg(SWITCH_REG_BW_CNTL1, val & ~0x8000000);
-
- SW_DBG("D: ctl0 0x%ux, ctl1 0x%ux\n", sw_read_reg(SWITCH_REG_BW_CNTL0),
- sw_read_reg(SWITCH_REG_BW_CNTL1));
-}
-
-static void adm5120_switch_tx_ring_reset(struct dma_desc *desc,
- struct sk_buff **skbl, int num)
-{
- memset(desc, 0, num * sizeof(*desc));
- desc[num-1].buf1 |= DESC_EOR;
- memset(skbl, 0, sizeof(struct skb*)*num);
-
- cur_txl = 0;
- dirty_txl = 0;
-}
-
-static void adm5120_switch_rx_ring_reset(struct dma_desc *desc,
- struct sk_buff **skbl, int num)
-{
- int i;
-
- memset(desc, 0, num * sizeof(*desc));
- for (i = 0; i < num; i++) {
- skbl[i] = dev_alloc_skb(SKB_ALLOC_LEN);
- if (!skbl[i]) {
- i = num;
- break;
- }
- skb_reserve(skbl[i], SKB_RESERVE_LEN);
- adm5120_rx_dma_update(&desc[i], skbl[i], (num-1==i));
- }
-
- cur_rxl = 0;
- dirty_rxl = 0;
-}
-
-static int adm5120_switch_tx_ring_alloc(void)
-{
- int err;
-
- txl_descs = dma_alloc_coherent(NULL, TX_DESCS_SIZE, &txl_descs_dma,
- GFP_ATOMIC);
- if (!txl_descs) {
- err = -ENOMEM;
- goto err;
- }
-
- txl_skbuff = kzalloc(TX_SKBS_SIZE, GFP_KERNEL);
- if (!txl_skbuff) {
- err = -ENOMEM;
- goto err;
- }
-
- return 0;
-
-err:
- return err;
-}
-
-static void adm5120_switch_tx_ring_free(void)
-{
- int i;
-
- if (txl_skbuff) {
- for (i = 0; i < TX_RING_SIZE; i++)
- if (txl_skbuff[i])
- kfree_skb(txl_skbuff[i]);
- kfree(txl_skbuff);
- }
-
- if (txl_descs)
- dma_free_coherent(NULL, TX_DESCS_SIZE, txl_descs,
- txl_descs_dma);
-}
-
-static int adm5120_switch_rx_ring_alloc(void)
-{
- int err;
- int i;
-
- /* init RX ring */
- rxl_descs = dma_alloc_coherent(NULL, RX_DESCS_SIZE, &rxl_descs_dma,
- GFP_ATOMIC);
- if (!rxl_descs) {
- err = -ENOMEM;
- goto err;
- }
-
- rxl_skbuff = kzalloc(RX_SKBS_SIZE, GFP_KERNEL);
- if (!rxl_skbuff) {
- err = -ENOMEM;
- goto err;
- }
-
- for (i = 0; i < RX_RING_SIZE; i++) {
- struct sk_buff *skb;
- skb = alloc_skb(SKB_ALLOC_LEN, GFP_ATOMIC);
- if (!skb) {
- err = -ENOMEM;
- goto err;
- }
- rxl_skbuff[i] = skb;
- skb_reserve(skb, SKB_RESERVE_LEN);
- }
-
- return 0;
-
-err:
- return err;
-}
-
-static void adm5120_switch_rx_ring_free(void)
-{
- int i;
-
- if (rxl_skbuff) {
- for (i = 0; i < RX_RING_SIZE; i++)
- if (rxl_skbuff[i])
- kfree_skb(rxl_skbuff[i]);
- kfree(rxl_skbuff);
- }
-
- if (rxl_descs)
- dma_free_coherent(NULL, RX_DESCS_SIZE, rxl_descs,
- rxl_descs_dma);
-}
-
-static void adm5120_write_mac(struct net_device *dev)
-{
- struct adm5120_if_priv *priv = netdev_priv(dev);
- unsigned char *mac = dev->dev_addr;
- u32 t;
-
- t = mac[2] | (mac[3] << MAC_WT1_MAC3_SHIFT) |
- (mac[4] << MAC_WT1_MAC4_SHIFT) | (mac[5] << MAC_WT1_MAC5_SHIFT);
- sw_write_reg(SWITCH_REG_MAC_WT1, t);
-
- t = (mac[0] << MAC_WT0_MAC0_SHIFT) | (mac[1] << MAC_WT0_MAC1_SHIFT) |
- MAC_WT0_MAWC | MAC_WT0_WVE | (priv->vlan_no<<3);
-
- sw_write_reg(SWITCH_REG_MAC_WT0, t);
-
- while (!(sw_read_reg(SWITCH_REG_MAC_WT0) & MAC_WT0_MWD));
-}
-
-static void adm5120_set_vlan(char *matrix)
-{
- unsigned long val;
- int vlan_port, port;
-
- val = matrix[0] + (matrix[1]<<8) + (matrix[2]<<16) + (matrix[3]<<24);
- sw_write_reg(SWITCH_REG_VLAN_G1, val);
- val = matrix[4] + (matrix[5]<<8);
- sw_write_reg(SWITCH_REG_VLAN_G2, val);
-
- /* Now set/update the port vs. device lookup table */
- for (port=0; port<SWITCH_NUM_PORTS; port++) {
- for (vlan_port=0; vlan_port<SWITCH_NUM_PORTS && !(matrix[vlan_port] & (0x00000001 << port)); vlan_port++);
- if (vlan_port <SWITCH_NUM_PORTS)
- adm5120_port[port] = adm5120_devs[vlan_port];
- else
- adm5120_port[port] = NULL;
- }
-}
-
-static void adm5120_switch_set_vlan_mac(unsigned int vlan, unsigned char *mac)
-{
- u32 t;
-
- t = mac[2] | (mac[3] << MAC_WT1_MAC3_SHIFT)
- | (mac[4] << MAC_WT1_MAC4_SHIFT)
- | (mac[5] << MAC_WT1_MAC5_SHIFT);
- sw_write_reg(SWITCH_REG_MAC_WT1, t);
-
- t = (mac[0] << MAC_WT0_MAC0_SHIFT) | (mac[1] << MAC_WT0_MAC1_SHIFT) |
- MAC_WT0_MAWC | MAC_WT0_WVE | (vlan << MAC_WT0_WVN_SHIFT) |
- (MAC_WT0_WAF_STATIC << MAC_WT0_WAF_SHIFT);
- sw_write_reg(SWITCH_REG_MAC_WT0, t);
-
- do {
- t = sw_read_reg(SWITCH_REG_MAC_WT0);
- } while ((t & MAC_WT0_MWD) == 0);
-}
-
-static void adm5120_switch_set_vlan_ports(unsigned int vlan, u32 ports)
-{
- unsigned int reg;
- u32 t;
-
- if (vlan < 4)
- reg = SWITCH_REG_VLAN_G1;
- else {
- vlan -= 4;
- reg = SWITCH_REG_VLAN_G2;
- }
-
- t = sw_read_reg(reg);
- t &= ~(0xFF << (vlan*8));
- t |= (ports << (vlan*8));
- sw_write_reg(reg, t);
-}
-
-/* ------------------------------------------------------------------------ */
-
-#ifdef CONFIG_ADM5120_SWITCH_NAPI
-static inline void adm5120_if_napi_enable(struct net_device *dev)
-{
- struct adm5120_if_priv *priv = netdev_priv(dev);
- napi_enable(&priv->napi);
-}
-
-static inline void adm5120_if_napi_disable(struct net_device *dev)
-{
- struct adm5120_if_priv *priv = netdev_priv(dev);
- napi_disable(&priv->napi);
-}
-#else
-static inline void adm5120_if_napi_enable(struct net_device *dev) {}
-static inline void adm5120_if_napi_disable(struct net_device *dev) {}
-#endif /* CONFIG_ADM5120_SWITCH_NAPI */
-
-static int adm5120_if_open(struct net_device *dev)
-{
- u32 t;
- int err;
- int i;
-
- adm5120_if_napi_enable(dev);
-
- err = request_irq(dev->irq, adm5120_switch_irq,
- (IRQF_SHARED | IRQF_DISABLED), dev->name, dev);
- if (err) {
- SW_ERR("unable to get irq for %s\n", dev->name);
- goto err;
- }
-
- if (!sw_used++)
- /* enable interrupts on first open */
- sw_int_unmask(SWITCH_INTS_USED);
-
- /* enable (additional) port */
- t = sw_read_reg(SWITCH_REG_PORT_CONF0);
- for (i = 0; i < SWITCH_NUM_PORTS; i++) {
- if (dev == adm5120_devs[i])
- t &= ~adm5120_eth_vlans[i];
- }
- sw_write_reg(SWITCH_REG_PORT_CONF0, t);
-
- netif_start_queue(dev);
-
- return 0;
-
-err:
- adm5120_if_napi_disable(dev);
- return err;
-}
-
-static int adm5120_if_stop(struct net_device *dev)
-{
- u32 t;
- int i;
-
- netif_stop_queue(dev);
- adm5120_if_napi_disable(dev);
-
- /* disable port if not assigned to other devices */
- t = sw_read_reg(SWITCH_REG_PORT_CONF0);
- t |= SWITCH_PORTS_NOCPU;
- for (i = 0; i < SWITCH_NUM_PORTS; i++) {
- if ((dev != adm5120_devs[i]) && netif_running(adm5120_devs[i]))
- t &= ~adm5120_eth_vlans[i];
- }
- sw_write_reg(SWITCH_REG_PORT_CONF0, t);
-
- if (!--sw_used)
- sw_int_mask(SWITCH_INTS_USED);
-
- free_irq(dev->irq, dev);
-
- return 0;
-}
-
-static int adm5120_if_hard_start_xmit(struct sk_buff *skb,
- struct net_device *dev)
-{
- struct dma_desc *desc;
- struct adm5120_if_priv *priv = netdev_priv(dev);
- unsigned int entry;
- unsigned long data;
- int i;
-
- /* lock switch irq */
- spin_lock_irq(&tx_lock);
-
- /* calculate the next TX descriptor entry. */
- entry = cur_txl % TX_RING_SIZE;
-
- desc = &txl_descs[entry];
- if (desc->buf1 & DESC_OWN) {
- /* We want to write a packet but the TX queue is still
- * occupied by the DMA. We are faster than the DMA... */
- SW_DBG("%s unable to transmit, packet dopped\n", dev->name);
- dev_kfree_skb(skb);
- dev->stats.tx_dropped++;
- return 0;
- }
-
- txl_skbuff[entry] = skb;
- data = (desc->buf1 & DESC_EOR);
- data |= DESC_ADDR(skb->data);
-
- desc->misc =
- ((skb->len<ETH_ZLEN?ETH_ZLEN:skb->len) << DESC_PKTLEN_SHIFT) |
- (0x1 << priv->vlan_no);
-
- desc->buflen = skb->len < ETH_ZLEN ? ETH_ZLEN : skb->len;
-
- desc->buf1 = data | DESC_OWN;
- sw_write_reg(SWITCH_REG_SEND_TRIG, SEND_TRIG_STL);
-
- cur_txl++;
- if (cur_txl == dirty_txl + TX_QUEUE_LEN) {
- for (i = 0; i < SWITCH_NUM_PORTS; i++) {
- if (!adm5120_devs[i])
- continue;
- netif_stop_queue(adm5120_devs[i]);
- }
- }
-
- dev->trans_start = jiffies;
-
- spin_unlock_irq(&tx_lock);
-
- return 0;
-}
-
-static void adm5120_if_tx_timeout(struct net_device *dev)
-{
- SW_INFO("TX timeout on %s\n",dev->name);
-}
-
-static void adm5120_if_set_multicast_list(struct net_device *dev)
-{
- struct adm5120_if_priv *priv = netdev_priv(dev);
- u32 ports;
- u32 t;
-
- ports = adm5120_eth_vlans[priv->vlan_no] & SWITCH_PORTS_NOCPU;
-
- t = sw_read_reg(SWITCH_REG_CPUP_CONF);
- if (dev->flags & IFF_PROMISC)
- /* enable unknown packets */
- t &= ~(ports << CPUP_CONF_DUNP_SHIFT);
- else
- /* disable unknown packets */
- t |= (ports << CPUP_CONF_DUNP_SHIFT);
-
- if (dev->flags & IFF_PROMISC || dev->flags & IFF_ALLMULTI ||
- dev->mc_count)
- /* enable multicast packets */
- t &= ~(ports << CPUP_CONF_DMCP_SHIFT);
- else
- /* disable multicast packets */
- t |= (ports << CPUP_CONF_DMCP_SHIFT);
-
- /* If there is any port configured to be in promiscuous mode, then the */
- /* Bridge Test Mode has to be activated. This will result in */
- /* transporting also packets learned in another VLAN to be forwarded */
- /* to the CPU. */
- /* The difficult scenario is when we want to build a bridge on the CPU.*/
- /* Assume we have port0 and the CPU port in VLAN0 and port1 and the */
- /* CPU port in VLAN1. Now we build a bridge on the CPU between */
- /* VLAN0 and VLAN1. Both ports of the VLANs are set in promisc mode. */
- /* Now assume a packet with ethernet source address 99 enters port 0 */
- /* It will be forwarded to the CPU because it is unknown. Then the */
- /* bridge in the CPU will send it to VLAN1 and it goes out at port 1. */
- /* When now a packet with ethernet destination address 99 comes in at */
- /* port 1 in VLAN1, then the switch has learned that this address is */
- /* located at port 0 in VLAN0. Therefore the switch will drop */
- /* this packet. In order to avoid this and to send the packet still */
- /* to the CPU, the Bridge Test Mode has to be activated. */
-
- /* Check if there is any vlan in promisc mode. */
- if (t & (SWITCH_PORTS_NOCPU << CPUP_CONF_DUNP_SHIFT))
- t &= ~CPUP_CONF_BTM; /* Disable Bridge Testing Mode */
- else
- t |= CPUP_CONF_BTM; /* Enable Bridge Testing Mode */
-
- sw_write_reg(SWITCH_REG_CPUP_CONF, t);
-
-}
-
-static int adm5120_if_set_mac_address(struct net_device *dev, void *p)
-{
- struct sockaddr *addr = p;
-
- memcpy(dev->dev_addr, addr->sa_data, dev->addr_len);
- adm5120_write_mac(dev);
- return 0;
-}
-
-static int adm5120_if_do_ioctl(struct net_device *dev, struct ifreq *rq,
- int cmd)
-{
- int err;
- struct adm5120_sw_info info;
- struct adm5120_if_priv *priv = netdev_priv(dev);
-
- switch(cmd) {
- case SIOCGADMINFO:
- info.magic = 0x5120;
- info.ports = adm5120_nrdevs;
- info.vlan = priv->vlan_no;
- err = copy_to_user(rq->ifr_data, &info, sizeof(info));
- if (err)
- return -EFAULT;
- break;
- case SIOCSMATRIX:
- if (!capable(CAP_NET_ADMIN))
- return -EPERM;
- err = copy_from_user(adm5120_eth_vlans, rq->ifr_data,
- sizeof(adm5120_eth_vlans));
- if (err)
- return -EFAULT;
- adm5120_set_vlan(adm5120_eth_vlans);
- break;
- case SIOCGMATRIX:
- err = copy_to_user(rq->ifr_data, adm5120_eth_vlans,
- sizeof(adm5120_eth_vlans));
- if (err)
- return -EFAULT;
- break;
- default:
- return -EOPNOTSUPP;
- }
- return 0;
-}
-
-static struct net_device *adm5120_if_alloc(void)
-{
- struct net_device *dev;
- struct adm5120_if_priv *priv;
-
- dev = alloc_etherdev(sizeof(*priv));
- if (!dev)
- return NULL;
-
- priv = netdev_priv(dev);
- priv->dev = dev;
-
- dev->irq = ADM5120_IRQ_SWITCH;
- dev->open = adm5120_if_open;
- dev->hard_start_xmit = adm5120_if_hard_start_xmit;
- dev->stop = adm5120_if_stop;
- dev->set_multicast_list = adm5120_if_set_multicast_list;
- dev->do_ioctl = adm5120_if_do_ioctl;
- dev->tx_timeout = adm5120_if_tx_timeout;
- dev->watchdog_timeo = TX_TIMEOUT;
- dev->set_mac_address = adm5120_if_set_mac_address;
-
-#ifdef CONFIG_ADM5120_SWITCH_NAPI
- netif_napi_add(dev, &priv->napi, adm5120_if_poll, 64);
-#endif
-
- return dev;
-}
-
-/* ------------------------------------------------------------------------ */
-
-static void adm5120_switch_cleanup(void)
-{
- int i;
-
- /* disable interrupts */
- sw_int_mask(SWITCH_INTS_ALL);
-
- for (i = 0; i < SWITCH_NUM_PORTS; i++) {
- struct net_device *dev = adm5120_devs[i];
- if (dev) {
- unregister_netdev(dev);
- free_netdev(dev);
- }
- }
-
- adm5120_switch_tx_ring_free();
- adm5120_switch_rx_ring_free();
-}
-
-static int __init adm5120_switch_probe(struct platform_device *pdev)
-{
- u32 t;
- int i, err;
-
- adm5120_nrdevs = adm5120_eth_num_ports;
-
- t = CPUP_CONF_DCPUP | CPUP_CONF_CRCP |
- SWITCH_PORTS_NOCPU << CPUP_CONF_DUNP_SHIFT |
- SWITCH_PORTS_NOCPU << CPUP_CONF_DMCP_SHIFT ;
- sw_write_reg(SWITCH_REG_CPUP_CONF, t);
-
- t = (SWITCH_PORTS_NOCPU << PORT_CONF0_EMCP_SHIFT) |
- (SWITCH_PORTS_NOCPU << PORT_CONF0_BP_SHIFT) |
- (SWITCH_PORTS_NOCPU);
- sw_write_reg(SWITCH_REG_PORT_CONF0, t);
-
- /* setup ports to Autoneg/100M/Full duplex/Auto MDIX */
- t = SWITCH_PORTS_PHY |
- (SWITCH_PORTS_PHY << PHY_CNTL2_SC_SHIFT) |
- (SWITCH_PORTS_PHY << PHY_CNTL2_DC_SHIFT) |
- (SWITCH_PORTS_PHY << PHY_CNTL2_PHYR_SHIFT) |
- (SWITCH_PORTS_PHY << PHY_CNTL2_AMDIX_SHIFT) |
- PHY_CNTL2_RMAE;
- sw_write_reg(SWITCH_REG_PHY_CNTL2, t);
-
- t = sw_read_reg(SWITCH_REG_PHY_CNTL3);
- t |= PHY_CNTL3_RNT;
- sw_write_reg(SWITCH_REG_PHY_CNTL3, t);
-
- /* Force all the packets from all ports are low priority */
- sw_write_reg(SWITCH_REG_PRI_CNTL, 0);
-
- sw_int_mask(SWITCH_INTS_ALL);
- sw_int_ack(SWITCH_INTS_ALL);
-
- err = adm5120_switch_rx_ring_alloc();
- if (err)
- goto err;
-
- err = adm5120_switch_tx_ring_alloc();
- if (err)
- goto err;
-
- adm5120_switch_tx_ring_reset(txl_descs, txl_skbuff, TX_RING_SIZE);
- adm5120_switch_rx_ring_reset(rxl_descs, rxl_skbuff, RX_RING_SIZE);
-
- sw_write_reg(SWITCH_REG_SHDA, 0);
- sw_write_reg(SWITCH_REG_SLDA, KSEG1ADDR(txl_descs));
- sw_write_reg(SWITCH_REG_RHDA, 0);
- sw_write_reg(SWITCH_REG_RLDA, KSEG1ADDR(rxl_descs));
-
- for (i = 0; i < SWITCH_NUM_PORTS; i++) {
- struct net_device *dev;
- struct adm5120_if_priv *priv;
-
- dev = adm5120_if_alloc();
- if (!dev) {
- err = -ENOMEM;
- goto err;
- }
-
- adm5120_devs[i] = dev;
- priv = netdev_priv(dev);
-
- priv->vlan_no = i;
- priv->port_mask = adm5120_eth_vlans[i];
-
- memcpy(dev->dev_addr, adm5120_eth_macs[i], 6);
- adm5120_write_mac(dev);
-
- err = register_netdev(dev);
- if (err) {
- SW_INFO("%s register failed, error=%d\n",
- dev->name, err);
- goto err;
- }
- }
-
- /* setup vlan/port mapping after devs are filled up */
- adm5120_set_vlan(adm5120_eth_vlans);
-
- /* enable CPU port */
- t = sw_read_reg(SWITCH_REG_CPUP_CONF);
- t &= ~CPUP_CONF_DCPUP;
- sw_write_reg(SWITCH_REG_CPUP_CONF, t);
-
- return 0;
-
-err:
- adm5120_switch_cleanup();
-
- SW_ERR("init failed\n");
- return err;
-}
-
-static int adm5120_switch_remove(struct platform_device *dev)
-{
- adm5120_switch_cleanup();
- return 0;
-}
-
-static struct platform_driver adm5120_switch_driver = {
- .probe = adm5120_switch_probe,
- .remove = adm5120_switch_remove,
- .driver = {
- .name = DRV_NAME,
- },
-};
-
-/* -------------------------------------------------------------------------- */
-
-static int __init adm5120_switch_mod_init(void)
-{
- int err;
-
- pr_info(DRV_DESC " version " DRV_VERSION "\n");
- err = platform_driver_register(&adm5120_switch_driver);
-
- return err;
-}
-
-static void __exit adm5120_switch_mod_exit(void)
-{
- platform_driver_unregister(&adm5120_switch_driver);
-}
-
-module_init(adm5120_switch_mod_init);
-module_exit(adm5120_switch_mod_exit);
-
-MODULE_LICENSE("GPL v2");
-MODULE_AUTHOR("Gabor Juhos <juhosg at openwrt.org>");
-MODULE_DESCRIPTION(DRV_DESC);
-MODULE_VERSION(DRV_VERSION);
diff --git a/target/linux/adm5120/files/drivers/net/adm5120sw.h b/target/linux/adm5120/files/drivers/net/adm5120sw.h
deleted file mode 100644
index c7c5ceddc7..0000000000
--- a/target/linux/adm5120/files/drivers/net/adm5120sw.h
+++ /dev/null
@@ -1,23 +0,0 @@
-/*
- * Defines for ADM5120 built in ethernet switch driver
- *
- * Copyright Jeroen Vreeken (pe1rxq@amsat.org), 2005
- *
- * Values come from ADM5120 datasheet and original ADMtek 2.4 driver,
- * Copyright ADMtek Inc.
- */
-
-#ifndef _INCLUDE_ADM5120SW_H_
-#define _INCLUDE_ADM5120SW_H_
-
-#define SIOCSMATRIX SIOCDEVPRIVATE
-#define SIOCGMATRIX SIOCDEVPRIVATE+1
-#define SIOCGADMINFO SIOCDEVPRIVATE+2
-
-struct adm5120_sw_info {
- u16 magic;
- u16 ports;
- u16 vlan;
-};
-
-#endif /* _INCLUDE_ADM5120SW_H_ */
diff --git a/target/linux/adm5120/files/drivers/usb/host/adm5120-dbg.c b/target/linux/adm5120/files/drivers/usb/host/adm5120-dbg.c
deleted file mode 100644
index f3b55f6714..0000000000
--- a/target/linux/adm5120/files/drivers/usb/host/adm5120-dbg.c
+++ /dev/null
@@ -1,842 +0,0 @@
-/*
- * ADM5120 HCD (Host Controller Driver) for USB
- *
- * Copyright (C) 2007,2008 Gabor Juhos <juhosg at openwrt.org>
- *
- * This file was derived from: drivers/usb/host/ohci-dbg.c
- * (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
- * (C) Copyright 2000-2002 David Brownell <dbrownell@users.sourceforge.net>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- *
- */
-
-/*-------------------------------------------------------------------------*/
-
-static inline char *ed_typestring(int ed_type)
-{
- switch (ed_type) {
- case PIPE_CONTROL:
- return "ctrl";
- case PIPE_BULK:
- return "bulk";
- case PIPE_INTERRUPT:
- return "intr";
- case PIPE_ISOCHRONOUS:
- return "isoc";
- }
- return "(bad ed_type)";
-}
-
-static inline char *ed_statestring(int state)
-{
- switch (state) {
- case ED_IDLE:
- return "IDLE";
- case ED_UNLINK:
- return "UNLINK";
- case ED_OPER:
- return "OPER";
- }
- return "?STATE";
-}
-
-static inline char *pipestring(int pipe)
-{
- return ed_typestring(usb_pipetype(pipe));
-}
-
-static inline char *td_pidstring(u32 info)
-{
- switch (info & TD_DP) {
- case TD_DP_SETUP:
- return "SETUP";
- case TD_DP_IN:
- return "IN";
- case TD_DP_OUT:
- return "OUT";
- }
- return "?PID";
-}
-
-static inline char *td_togglestring(u32 info)
-{
- switch (info & TD_T) {
- case TD_T_DATA0:
- return "DATA0";
- case TD_T_DATA1:
- return "DATA1";
- case TD_T_CARRY:
- return "CARRY";
- }
- return "?TOGGLE";
-}
-
-/*-------------------------------------------------------------------------*/
-
-#ifdef DEBUG
-
-/* debug| print the main components of an URB
- * small: 0) header + data packets 1) just header
- */
-static void __attribute__((unused))
-urb_print(struct admhcd *ahcd, struct urb *urb, char *str, int small, int status)
-{
- unsigned int pipe = urb->pipe;
-
- if (!urb->dev || !urb->dev->bus) {
- admhc_dbg(ahcd, "%s URB: no dev", str);
- return;
- }
-
-#ifndef ADMHC_VERBOSE_DEBUG
- if (status != 0)
-#endif
- admhc_dbg(ahcd, "URB-%s %p dev=%d ep=%d%s-%s flags=%x len=%d/%d "
- "stat=%d\n",
- str,
- urb,
- usb_pipedevice (pipe),
- usb_pipeendpoint (pipe),
- usb_pipeout(pipe)? "out" : "in",
- pipestring(pipe),
- urb->transfer_flags,
- urb->actual_length,
- urb->transfer_buffer_length,
- status);
-
-#ifdef ADMHC_VERBOSE_DEBUG
- if (!small) {
- int i, len;
-
- if (usb_pipecontrol(pipe)) {
- admhc_dbg(ahcd, "setup(8):");
- for (i = 0; i < 8 ; i++)
- printk (" %02x", ((__u8 *) urb->setup_packet) [i]);
- printk ("\n");
- }
- if (urb->transfer_buffer_length > 0 && urb->transfer_buffer) {
- admhc_dbg(ahcd, "data(%d/%d):",
- urb->actual_length,
- urb->transfer_buffer_length);
- len = usb_pipeout(pipe)?
- urb->transfer_buffer_length: urb->actual_length;
- for (i = 0; i < 16 && i < len; i++)
- printk(" %02x", ((__u8 *)urb->transfer_buffer)[i]);
- printk("%s stat:%d\n", i < len? "...": "", status);
- }
- }
-#endif /* ADMHC_VERBOSE_DEBUG */
-}
-
-#define admhc_dbg_sw(ahcd, next, size, format, arg...) \
- do { \
- if (next) { \
- unsigned s_len; \
- s_len = scnprintf(*next, *size, format, ## arg ); \
- *size -= s_len; *next += s_len; \
- } else \
- admhc_dbg(ahcd,format, ## arg ); \
- } while (0);
-
-
-static void admhc_dump_intr_mask(struct admhcd *ahcd, char *label, u32 mask,
- char **next, unsigned *size)
-{
- admhc_dbg_sw(ahcd, next, size, "%s 0x%08x%s%s%s%s%s%s%s%s%s%s%s%s\n",
- label,
- mask,
- (mask & ADMHC_INTR_INTA) ? " INTA" : "",
- (mask & ADMHC_INTR_FATI) ? " FATI" : "",
- (mask & ADMHC_INTR_SWI) ? " SWI" : "",
- (mask & ADMHC_INTR_TDC) ? " TDC" : "",
- (mask & ADMHC_INTR_FNO) ? " FNO" : "",
- (mask & ADMHC_INTR_SO) ? " SO" : "",
- (mask & ADMHC_INTR_INSM) ? " INSM" : "",
- (mask & ADMHC_INTR_BABI) ? " BABI" : "",
- (mask & ADMHC_INTR_7) ? " !7!" : "",
- (mask & ADMHC_INTR_6) ? " !6!" : "",
- (mask & ADMHC_INTR_RESI) ? " RESI" : "",
- (mask & ADMHC_INTR_SOFI) ? " SOFI" : ""
- );
-}
-
-static void maybe_print_eds(struct admhcd *ahcd, char *label, u32 value,
- char **next, unsigned *size)
-{
- if (value)
- admhc_dbg_sw(ahcd, next, size, "%s %08x\n", label, value);
-}
-
-static char *buss2string (int state)
-{
- switch (state) {
- case ADMHC_BUSS_RESET:
- return "reset";
- case ADMHC_BUSS_RESUME:
- return "resume";
- case ADMHC_BUSS_OPER:
- return "operational";
- case ADMHC_BUSS_SUSPEND:
- return "suspend";
- }
- return "?state";
-}
-
-static void
-admhc_dump_status(struct admhcd *ahcd, char **next, unsigned *size)
-{
- struct admhcd_regs __iomem *regs = ahcd->regs;
- u32 temp;
-
- temp = admhc_readl(ahcd, &regs->gencontrol);
- admhc_dbg_sw(ahcd, next, size,
- "gencontrol 0x%08x%s%s%s%s\n",
- temp,
- (temp & ADMHC_CTRL_UHFE) ? " UHFE" : "",
- (temp & ADMHC_CTRL_SIR) ? " SIR" : "",
- (temp & ADMHC_CTRL_DMAA) ? " DMAA" : "",
- (temp & ADMHC_CTRL_SR) ? " SR" : ""
- );
-
- temp = admhc_readl(ahcd, &regs->host_control);
- admhc_dbg_sw(ahcd, next, size,
- "host_control 0x%08x BUSS=%s%s\n",
- temp,
- buss2string(temp & ADMHC_HC_BUSS),
- (temp & ADMHC_HC_DMAE) ? " DMAE" : ""
- );
-
- admhc_dump_intr_mask(ahcd, "int_status",
- admhc_readl(ahcd, &regs->int_status),
- next, size);
- admhc_dump_intr_mask(ahcd, "int_enable",
- admhc_readl(ahcd, &regs->int_enable),
- next, size);
-
- maybe_print_eds(ahcd, "hosthead",
- admhc_readl(ahcd, &regs->hosthead), next, size);
-}
-
-#define dbg_port_sw(hc,num,value,next,size) \
- admhc_dbg_sw(hc, next, size, \
- "portstatus [%d] " \
- "0x%08x%s%s%s%s%s%s%s%s%s%s%s%s\n", \
- num, temp, \
- (temp & ADMHC_PS_PRSC) ? " PRSC" : "", \
- (temp & ADMHC_PS_OCIC) ? " OCIC" : "", \
- (temp & ADMHC_PS_PSSC) ? " PSSC" : "", \
- (temp & ADMHC_PS_PESC) ? " PESC" : "", \
- (temp & ADMHC_PS_CSC) ? " CSC" : "", \
- \
- (temp & ADMHC_PS_LSDA) ? " LSDA" : "", \
- (temp & ADMHC_PS_PPS) ? " PPS" : "", \
- (temp & ADMHC_PS_PRS) ? " PRS" : "", \
- (temp & ADMHC_PS_POCI) ? " POCI" : "", \
- (temp & ADMHC_PS_PSS) ? " PSS" : "", \
- \
- (temp & ADMHC_PS_PES) ? " PES" : "", \
- (temp & ADMHC_PS_CCS) ? " CCS" : "" \
- );
-
-
-static void
-admhc_dump_roothub(
- struct admhcd *ahcd,
- int verbose,
- char **next,
- unsigned *size)
-{
- u32 temp, i;
-
- temp = admhc_read_rhdesc(ahcd);
- if (temp == ~(u32)0)
- return;
-
- if (verbose) {
- admhc_dbg_sw(ahcd, next, size,
- "rhdesc %08x%s%s%s%s%s%s PPCM=%02x%s%s%s%s NUMP=%d(%d)\n",
- temp,
- (temp & ADMHC_RH_CRWE) ? " CRWE" : "",
- (temp & ADMHC_RH_OCIC) ? " OCIC" : "",
- (temp & ADMHC_RH_LPSC) ? " LPSC" : "",
- (temp & ADMHC_RH_LPSC) ? " DRWE" : "",
- (temp & ADMHC_RH_LPSC) ? " OCI" : "",
- (temp & ADMHC_RH_LPSC) ? " LPS" : "",
- ((temp & ADMHC_RH_PPCM) >> 16),
- (temp & ADMHC_RH_NOCP) ? " NOCP" : "",
- (temp & ADMHC_RH_OCPM) ? " OCPM" : "",
- (temp & ADMHC_RH_NPS) ? " NPS" : "",
- (temp & ADMHC_RH_PSM) ? " PSM" : "",
- (temp & ADMHC_RH_NUMP), ahcd->num_ports
- );
- }
-
- for (i = 0; i < ahcd->num_ports; i++) {
- temp = admhc_read_portstatus(ahcd, i);
- dbg_port_sw(ahcd, i, temp, next, size);
- }
-}
-
-static void admhc_dump(struct admhcd *ahcd, int verbose)
-{
- admhc_dbg(ahcd, "ADMHC ahcd state\n");
-
- /* dumps some of the state we know about */
- admhc_dump_status(ahcd, NULL, NULL);
- admhc_dbg(ahcd,"current frame #%04x\n",
- admhc_frame_no(ahcd));
-
- admhc_dump_roothub(ahcd, verbose, NULL, NULL);
-}
-
-static const char data0[] = "DATA0";
-static const char data1[] = "DATA1";
-
-static void admhc_dump_td(const struct admhcd *ahcd, const char *label,
- const struct td *td)
-{
- u32 tmp;
-
- admhc_dbg(ahcd, "%s td %p; urb %p index %d; hwNextTD %08x\n",
- label, td,
- td->urb, td->index,
- hc32_to_cpup(ahcd, &td->hwNextTD));
-
- tmp = hc32_to_cpup(ahcd, &td->hwINFO);
- admhc_dbg(ahcd, " status %08x%s CC=%x EC=%d %s %s ISI=%x FN=%x\n",
- tmp,
- (tmp & TD_OWN) ? " OWN" : "",
- TD_CC_GET(tmp),
- TD_EC_GET(tmp),
- td_togglestring(tmp),
- td_pidstring(tmp),
- TD_ISI_GET(tmp),
- TD_FN_GET(tmp));
-
- tmp = hc32_to_cpup(ahcd, &td->hwCBL);
- admhc_dbg(ahcd, " dbp %08x; cbl %08x; LEN=%d%s\n",
- hc32_to_cpup(ahcd, &td->hwDBP),
- tmp,
- TD_BL_GET(tmp),
- (tmp & TD_IE) ? " IE" : "");
-}
-
-/* caller MUST own hcd spinlock if verbose is set! */
-static void __attribute__((unused))
-admhc_dump_ed(const struct admhcd *ahcd, const char *label,
- const struct ed *ed, int verbose)
-{
- u32 tmp = hc32_to_cpu(ahcd, ed->hwINFO);
-
- admhc_dbg(ahcd, "%s ed %p %s type %s; next ed %08x\n",
- label,
- ed, ed_statestring(ed->state), ed_typestring(ed->type),
- hc32_to_cpup(ahcd, &ed->hwNextED));
-
- admhc_dbg(ahcd, " info %08x MAX=%d%s%s%s%s EP=%d DEV=%d\n", tmp,
- ED_MPS_GET(tmp),
- (tmp & ED_ISO) ? " ISO" : "",
- (tmp & ED_SKIP) ? " SKIP" : "",
- (tmp & ED_SPEED_FULL) ? " FULL" : " LOW",
- (tmp & ED_INT) ? " INT" : "",
- ED_EN_GET(tmp),
- ED_FA_GET(tmp));
-
- tmp = hc32_to_cpup(ahcd, &ed->hwHeadP);
- admhc_dbg(ahcd, " tds: head %08x tail %08x %s%s%s\n",
- tmp & TD_MASK,
- hc32_to_cpup (ahcd, &ed->hwTailP),
- (tmp & ED_C) ? data1 : data0,
- (tmp & ED_H) ? " HALT" : "",
- verbose ? " td list follows" : " (not listing)");
-
- if (verbose) {
- struct list_head *tmp;
-
- /* use ed->td_list because HC concurrently modifies
- * hwNextTD as it accumulates ed_donelist.
- */
- list_for_each(tmp, &ed->td_list) {
- struct td *td;
- td = list_entry(tmp, struct td, td_list);
- admhc_dump_td (ahcd, " ->", td);
- }
- }
-}
-
-#else /* ifdef DEBUG */
-
-static inline void urb_print(struct admhcd *ahcd, struct urb * urb, char * str,
- int small) {}
-static inline void admhc_dump_ed(const struct admhcd *ahcd, const char *label,
- const struct ed *ed, int verbose) {}
-static inline void admhc_dump_td(const struct admhcd *ahcd, const char *label,
- const struct td *td) {}
-static inline void admhc_dump(struct admhcd *ahcd, int verbose) {}
-
-#undef ADMHC_VERBOSE_DEBUG
-
-#endif /* DEBUG */
-
-/*-------------------------------------------------------------------------*/
-
-#ifdef STUB_DEBUG_FILES
-
-static inline void create_debug_files(struct admhcd *bus) { }
-static inline void remove_debug_files(struct admhcd *bus) { }
-
-#else
-
-static int debug_async_open(struct inode *, struct file *);
-static int debug_periodic_open(struct inode *, struct file *);
-static int debug_registers_open(struct inode *, struct file *);
-static ssize_t debug_output(struct file*, char __user*, size_t, loff_t*);
-static int debug_close(struct inode *, struct file *);
-
-static const struct file_operations debug_async_fops = {
- .owner = THIS_MODULE,
- .open = debug_async_open,
- .read = debug_output,
- .release = debug_close,
-};
-static const struct file_operations debug_periodic_fops = {
- .owner = THIS_MODULE,
- .open = debug_periodic_open,
- .read = debug_output,
- .release = debug_close,
-};
-static const struct file_operations debug_registers_fops = {
- .owner = THIS_MODULE,
- .open = debug_registers_open,
- .read = debug_output,
- .release = debug_close,
-};
-
-static struct dentry *admhc_debug_root;
-
-struct debug_buffer {
- ssize_t (*fill_func)(struct debug_buffer *); /* fill method */
- struct device *dev;
- struct mutex mutex; /* protect filling of buffer */
- size_t count; /* number of characters filled into buffer */
- char *page;
-};
-
-static ssize_t
-show_list(struct admhcd *ahcd, char *buf, size_t count, struct ed *ed)
-{
- unsigned temp;
- unsigned size = count;
-
- if (!ed)
- return 0;
-
- /* dump a snapshot of the bulk or control schedule */
- while (ed) {
- u32 info = hc32_to_cpu(ahcd, ed->hwINFO);
- u32 headp = hc32_to_cpu(ahcd, ed->hwHeadP);
- u32 tailp = hc32_to_cpu(ahcd, ed->hwTailP);
- struct list_head *entry;
- struct td *td;
-
- temp = scnprintf(buf, size,
- "ed/%p %s %s %cs dev%d ep%d %s%smax %d %08x%s%s %s"
- " h:%08x t:%08x",
- ed,
- ed_statestring(ed->state),
- ed_typestring (ed->type),
- (info & ED_SPEED_FULL) ? 'f' : 'l',
- info & ED_FA_MASK,
- (info >> ED_EN_SHIFT) & ED_EN_MASK,
- (info & ED_INT) ? "INT " : "",
- (info & ED_ISO) ? "ISO " : "",
- (info >> ED_MPS_SHIFT) & ED_MPS_MASK ,
- info,
- (info & ED_SKIP) ? " S" : "",
- (headp & ED_H) ? " H" : "",
- (headp & ED_C) ? data1 : data0,
- headp & ED_MASK,tailp);
- size -= temp;
- buf += temp;
-
- list_for_each(entry, &ed->td_list) {
- u32 dbp, cbl;
-
- td = list_entry(entry, struct td, td_list);
- info = hc32_to_cpup (ahcd, &td->hwINFO);
- dbp = hc32_to_cpup (ahcd, &td->hwDBP);
- cbl = hc32_to_cpup (ahcd, &td->hwCBL);
-
- temp = scnprintf(buf, size,
- "\n\ttd/%p %s %d %s%scc=%x urb %p (%08x,%08x)",
- td,
- td_pidstring(info),
- TD_BL_GET(cbl),
- (info & TD_OWN) ? "" : "DONE ",
- (cbl & TD_IE) ? "IE " : "",
- TD_CC_GET (info), td->urb, info, cbl);
- size -= temp;
- buf += temp;
- }
-
- temp = scnprintf(buf, size, "\n");
- size -= temp;
- buf += temp;
-
- ed = ed->ed_next;
- }
-
- return count - size;
-}
-
-static ssize_t fill_async_buffer(struct debug_buffer *buf)
-{
- struct usb_bus *bus;
- struct usb_hcd *hcd;
- struct admhcd *ahcd;
- size_t temp;
- unsigned long flags;
-
- bus = dev_get_drvdata(buf->dev);
- hcd = bus_to_hcd(bus);
- ahcd = hcd_to_admhcd(hcd);
-
- spin_lock_irqsave(&ahcd->lock, flags);
- temp = show_list(ahcd, buf->page, PAGE_SIZE, ahcd->ed_head);
- spin_unlock_irqrestore(&ahcd->lock, flags);
-
- return temp;
-}
-
-
-#define DBG_SCHED_LIMIT 64
-
-static ssize_t fill_periodic_buffer(struct debug_buffer *buf)
-{
- struct usb_bus *bus;
- struct usb_hcd *hcd;
- struct admhcd *ahcd;
- struct ed **seen, *ed;
- unsigned long flags;
- unsigned temp, size, seen_count;
- char *next;
- unsigned i;
-
- if (!(seen = kmalloc(DBG_SCHED_LIMIT * sizeof *seen, GFP_ATOMIC)))
- return 0;
- seen_count = 0;
-
- bus = dev_get_drvdata(buf->dev);
- hcd = bus_to_hcd(bus);
- ahcd = hcd_to_admhcd(hcd);
- next = buf->page;
- size = PAGE_SIZE;
-
- temp = scnprintf(next, size, "size = %d\n", NUM_INTS);
- size -= temp;
- next += temp;
-
- /* dump a snapshot of the periodic schedule (and load) */
- spin_lock_irqsave(&ahcd->lock, flags);
- for (i = 0; i < NUM_INTS; i++) {
- if (!(ed = ahcd->periodic [i]))
- continue;
-
- temp = scnprintf(next, size, "%2d [%3d]:", i, ahcd->load [i]);
- size -= temp;
- next += temp;
-
- do {
- temp = scnprintf(next, size, " ed%d/%p",
- ed->interval, ed);
- size -= temp;
- next += temp;
- for (temp = 0; temp < seen_count; temp++) {
- if (seen [temp] == ed)
- break;
- }
-
- /* show more info the first time around */
- if (temp == seen_count) {
- u32 info = hc32_to_cpu (ahcd, ed->hwINFO);
- struct list_head *entry;
- unsigned qlen = 0;
-
- /* qlen measured here in TDs, not urbs */
- list_for_each (entry, &ed->td_list)
- qlen++;
- temp = scnprintf(next, size,
- " (%cs dev%d ep%d%s qlen %u"
- " max %d %08x%s%s)",
- (info & ED_SPEED_FULL) ? 'f' : 'l',
- ED_FA_GET(info),
- ED_EN_GET(info),
- (info & ED_ISO) ? "iso" : "int",
- qlen,
- ED_MPS_GET(info),
- info,
- (info & ED_SKIP) ? " K" : "",
- (ed->hwHeadP &
- cpu_to_hc32(ahcd, ED_H)) ?
- " H" : "");
- size -= temp;
- next += temp;
-
- if (seen_count < DBG_SCHED_LIMIT)
- seen [seen_count++] = ed;
-
- ed = ed->ed_next;
-
- } else {
- /* we've seen it and what's after */
- temp = 0;
- ed = NULL;
- }
-
- } while (ed);
-
- temp = scnprintf(next, size, "\n");
- size -= temp;
- next += temp;
- }
- spin_unlock_irqrestore(&ahcd->lock, flags);
- kfree (seen);
-
- return PAGE_SIZE - size;
-}
-
-
-#undef DBG_SCHED_LIMIT
-
-static ssize_t fill_registers_buffer(struct debug_buffer *buf)
-{
- struct usb_bus *bus;
- struct usb_hcd *hcd;
- struct admhcd *ahcd;
- struct admhcd_regs __iomem *regs;
- unsigned long flags;
- unsigned temp, size;
- char *next;
- u32 rdata;
-
- bus = dev_get_drvdata(buf->dev);
- hcd = bus_to_hcd(bus);
- ahcd = hcd_to_admhcd(hcd);
- regs = ahcd->regs;
- next = buf->page;
- size = PAGE_SIZE;
-
- spin_lock_irqsave(&ahcd->lock, flags);
-
- /* dump driver info, then registers in spec order */
-
- admhc_dbg_sw(ahcd, &next, &size,
- "bus %s, device %s\n"
- "%s\n"
- "%s version " DRIVER_VERSION "\n",
- hcd->self.controller->bus->name,
- hcd->self.controller->bus_id,
- hcd->product_desc,
- hcd_name);
-
- if (bus->controller->power.power_state.event) {
- size -= scnprintf(next, size,
- "SUSPENDED (no register access)\n");
- goto done;
- }
-
- admhc_dump_status(ahcd, &next, &size);
-
- /* other registers mostly affect frame timings */
- rdata = admhc_readl(ahcd, &regs->fminterval);
- temp = scnprintf(next, size,
- "fmintvl 0x%08x %sFSLDP=0x%04x FI=0x%04x\n",
- rdata, (rdata & ADMHC_SFI_FIT) ? "FIT " : "",
- (rdata >> ADMHC_SFI_FSLDP_SHIFT) & ADMHC_SFI_FSLDP_MASK,
- rdata & ADMHC_SFI_FI_MASK);
- size -= temp;
- next += temp;
-
- rdata = admhc_readl(ahcd, &regs->fmnumber);
- temp = scnprintf(next, size, "fmnumber 0x%08x %sFR=0x%04x FN=%04x\n",
- rdata, (rdata & ADMHC_SFN_FRT) ? "FRT " : "",
- (rdata >> ADMHC_SFN_FR_SHIFT) & ADMHC_SFN_FR_MASK,
- rdata & ADMHC_SFN_FN_MASK);
- size -= temp;
- next += temp;
-
- /* TODO: use predefined bitmask */
- rdata = admhc_readl(ahcd, &regs->lsthresh);
- temp = scnprintf(next, size, "lsthresh 0x%04x\n",
- rdata & 0x3fff);
- size -= temp;
- next += temp;
-
- temp = scnprintf(next, size, "hub poll timer: %s\n",
- admhcd_to_hcd(ahcd)->poll_rh ? "ON" : "OFF");
- size -= temp;
- next += temp;
-
- /* roothub */
- admhc_dump_roothub(ahcd, 1, &next, &size);
-
-done:
- spin_unlock_irqrestore(&ahcd->lock, flags);
- return PAGE_SIZE - size;
-}
-
-
-static struct debug_buffer *alloc_buffer(struct device *dev,
- ssize_t (*fill_func)(struct debug_buffer *))
-{
- struct debug_buffer *buf;
-
- buf = kzalloc(sizeof(struct debug_buffer), GFP_KERNEL);
-
- if (buf) {
- buf->dev = dev;
- buf->fill_func = fill_func;
- mutex_init(&buf->mutex);
- }
-
- return buf;
-}
-
-static int fill_buffer(struct debug_buffer *buf)
-{
- int ret = 0;
-
- if (!buf->page)
- buf->page = (char *)get_zeroed_page(GFP_KERNEL);
-
- if (!buf->page) {
- ret = -ENOMEM;
- goto out;
- }
-
- ret = buf->fill_func(buf);
-
- if (ret >= 0) {
- buf->count = ret;
- ret = 0;
- }
-
-out:
- return ret;
-}
-
-static ssize_t debug_output(struct file *file, char __user *user_buf,
- size_t len, loff_t *offset)
-{
- struct debug_buffer *buf = file->private_data;
- int ret = 0;
-
- mutex_lock(&buf->mutex);
- if (buf->count == 0) {
- ret = fill_buffer(buf);
- if (ret != 0) {
- mutex_unlock(&buf->mutex);
- goto out;
- }
- }
- mutex_unlock(&buf->mutex);
-
- ret = simple_read_from_buffer(user_buf, len, offset,
- buf->page, buf->count);
-
-out:
- return ret;
-}
-
-static int debug_close(struct inode *inode, struct file *file)
-{
- struct debug_buffer *buf = file->private_data;
-
- if (buf) {
- if (buf->page)
- free_page((unsigned long)buf->page);
- kfree(buf);
- }
-
- return 0;
-}
-
-static int debug_async_open(struct inode *inode, struct file *file)
-{
- file->private_data = alloc_buffer(inode->i_private, fill_async_buffer);
-
- return file->private_data ? 0 : -ENOMEM;
-}
-
-static int debug_periodic_open(struct inode *inode, struct file *file)
-{
- file->private_data = alloc_buffer(inode->i_private,
- fill_periodic_buffer);
-
- return file->private_data ? 0 : -ENOMEM;
-}
-
-static int debug_registers_open(struct inode *inode, struct file *file)
-{
- file->private_data = alloc_buffer(inode->i_private,
- fill_registers_buffer);
-
- return file->private_data ? 0 : -ENOMEM;
-}
-
-static inline void create_debug_files(struct admhcd *ahcd)
-{
- struct usb_bus *bus = &admhcd_to_hcd(ahcd)->self;
- struct device *dev = bus->dev;
-
- ahcd->debug_dir = debugfs_create_dir(bus->bus_name, admhc_debug_root);
- if (!ahcd->debug_dir)
- goto dir_error;
-
- ahcd->debug_async = debugfs_create_file("async", S_IRUGO,
- ahcd->debug_dir, dev,
- &debug_async_fops);
- if (!ahcd->debug_async)
- goto async_error;
-
- ahcd->debug_periodic = debugfs_create_file("periodic", S_IRUGO,
- ahcd->debug_dir, dev,
- &debug_periodic_fops);
- if (!ahcd->debug_periodic)
- goto periodic_error;
-
- ahcd->debug_registers = debugfs_create_file("registers", S_IRUGO,
- ahcd->debug_dir, dev,
- &debug_registers_fops);
- if (!ahcd->debug_registers)
- goto registers_error;
-
- admhc_dbg(ahcd, "created debug files\n");
- return;
-
-registers_error:
- debugfs_remove(ahcd->debug_periodic);
-periodic_error:
- debugfs_remove(ahcd->debug_async);
-async_error:
- debugfs_remove(ahcd->debug_dir);
-dir_error:
- ahcd->debug_periodic = NULL;
- ahcd->debug_async = NULL;
- ahcd->debug_dir = NULL;
-}
-
-static inline void remove_debug_files(struct admhcd *ahcd)
-{
- debugfs_remove(ahcd->debug_registers);
- debugfs_remove(ahcd->debug_periodic);
- debugfs_remove(ahcd->debug_async);
- debugfs_remove(ahcd->debug_dir);
-}
-
-#endif
-
-/*-------------------------------------------------------------------------*/
diff --git a/target/linux/adm5120/files/drivers/usb/host/adm5120-drv.c b/target/linux/adm5120/files/drivers/usb/host/adm5120-drv.c
deleted file mode 100644
index ca7f8ef64b..0000000000
--- a/target/linux/adm5120/files/drivers/usb/host/adm5120-drv.c
+++ /dev/null
@@ -1,236 +0,0 @@
-/*
- * ADM5120 HCD (Host Controller Driver) for USB
- *
- * Copyright (C) 2007,2008 Gabor Juhos <juhosg at openwrt.org>
- *
- * This file was derived from: drivers/usb/host/ohci-au1xxx.c
- * (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
- * (C) Copyright 2000-2002 David Brownell <dbrownell@users.sourceforge.net>
- * (C) Copyright 2002 Hewlett-Packard Company
- *
- * Written by Christopher Hoover <ch@hpl.hp.com>
- * Based on fragments of previous driver by Rusell King et al.
- *
- * Modified for LH7A404 from ahcd-sa1111.c
- * by Durgesh Pattamatta <pattamattad@sharpsec.com>
- * Modified for AMD Alchemy Au1xxx
- * by Matt Porter <mporter@kernel.crashing.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- *
- */
-
-#include <linux/platform_device.h>
-#include <linux/signal.h>
-
-#include <asm/bootinfo.h>
-#include <adm5120_defs.h>
-
-#ifdef DEBUG
-#define HCD_DBG(f, a...) printk(KERN_DEBUG "%s: " f, hcd_name, ## a)
-#else
-#define HCD_DBG(f, a...) do {} while (0)
-#endif
-#define HCD_ERR(f, a...) printk(KERN_ERR "%s: " f, hcd_name, ## a)
-#define HCD_INFO(f, a...) printk(KERN_INFO "%s: " f, hcd_name, ## a)
-
-/*-------------------------------------------------------------------------*/
-
-static int admhc_adm5120_probe(const struct hc_driver *driver,
- struct platform_device *dev)
-{
- int retval;
- struct usb_hcd *hcd;
- int irq;
- struct resource *regs;
-
- /* sanity checks */
- regs = platform_get_resource(dev, IORESOURCE_MEM, 0);
- if (!regs) {
- HCD_DBG("no IOMEM resource found\n");
- return -ENODEV;
- }
-
- irq = platform_get_irq(dev, 0);
- if (irq < 0) {
- HCD_DBG("no IRQ resource found\n");
- return -ENODEV;
- }
-
- hcd = usb_create_hcd(driver, &dev->dev, "ADM5120");
- if (!hcd)
- return -ENOMEM;
-
- hcd->rsrc_start = regs->start;
- hcd->rsrc_len = regs->end - regs->start + 1;
-
- if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) {
- HCD_DBG("request_mem_region failed\n");
- retval = -EBUSY;
- goto err_dev;
- }
-
- hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len);
- if (!hcd->regs) {
- HCD_DBG("ioremap failed\n");
- retval = -ENOMEM;
- goto err_mem;
- }
-
- admhc_hcd_init(hcd_to_admhcd(hcd));
-
- retval = usb_add_hcd(hcd, irq, IRQF_DISABLED);
- if (retval)
- goto err_io;
-
- return 0;
-
-err_io:
- iounmap(hcd->regs);
-err_mem:
- release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
-err_dev:
- usb_put_hcd(hcd);
- return retval;
-}
-
-
-/* may be called without controller electrically present */
-/* may be called with controller, bus, and devices active */
-
-static void admhc_adm5120_remove(struct usb_hcd *hcd,
- struct platform_device *dev)
-{
- usb_remove_hcd(hcd);
- iounmap(hcd->regs);
- release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
- usb_put_hcd(hcd);
-}
-
-/*-------------------------------------------------------------------------*/
-
-static int __devinit
-admhc_adm5120_start(struct usb_hcd *hcd)
-{
- struct admhcd *ahcd = hcd_to_admhcd (hcd);
- int ret;
-
- ret = admhc_init(ahcd);
- if (ret < 0) {
- HCD_ERR("unable to init %s\n", hcd->self.bus_name);
- goto err;
- }
-
- ret = admhc_run(ahcd);
- if (ret < 0) {
- HCD_ERR("unable to run %s\n", hcd->self.bus_name);
- goto err_stop;
- }
-
- return 0;
-
-err_stop:
- admhc_stop(hcd);
-err:
- return ret;
-}
-
-/*-------------------------------------------------------------------------*/
-
-static const struct hc_driver adm5120_hc_driver = {
- .description = hcd_name,
- .product_desc = "ADM5120 built-in USB 1.1 Host Controller",
- .hcd_priv_size = sizeof(struct admhcd),
-
- /*
- * generic hardware linkage
- */
- .irq = admhc_irq,
- .flags = HCD_USB11 | HCD_MEMORY,
-
- /*
- * basic lifecycle operations
- */
- .start = admhc_adm5120_start,
- .stop = admhc_stop,
- .shutdown = admhc_shutdown,
-
- /*
- * managing i/o requests and associated device resources
- */
- .urb_enqueue = admhc_urb_enqueue,
- .urb_dequeue = admhc_urb_dequeue,
- .endpoint_disable = admhc_endpoint_disable,
-
- /*
- * scheduling support
- */
- .get_frame_number = admhc_get_frame_number,
-
- /*
- * root hub support
- */
- .hub_status_data = admhc_hub_status_data,
- .hub_control = admhc_hub_control,
- .hub_irq_enable = admhc_hub_irq_enable,
-#ifdef CONFIG_PM
- .bus_suspend = admhc_bus_suspend,
- .bus_resume = admhc_bus_resume,
-#endif
- .start_port_reset = admhc_start_port_reset,
-};
-
-/*-------------------------------------------------------------------------*/
-
-static int usb_hcd_adm5120_probe(struct platform_device *pdev)
-{
- int ret;
-
- ret = admhc_adm5120_probe(&adm5120_hc_driver, pdev);
-
- return ret;
-}
-
-static int usb_hcd_adm5120_remove(struct platform_device *pdev)
-{
- struct usb_hcd *hcd = platform_get_drvdata(pdev);
-
- admhc_adm5120_remove(hcd, pdev);
-
- return 0;
-}
-
-#ifdef CONFIG_PM
-/* TODO */
-static int usb_hcd_adm5120_suspend(struct platform_device *dev)
-{
- struct usb_hcd *hcd = platform_get_drvdata(dev);
-
- return 0;
-}
-
-static int usb_hcd_adm5120_resume(struct platform_device *dev)
-{
- struct usb_hcd *hcd = platform_get_drvdata(dev);
-
- return 0;
-}
-#else
-#define usb_hcd_adm5120_suspend NULL
-#define usb_hcd_adm5120_resume NULL
-#endif /* CONFIG_PM */
-
-static struct platform_driver usb_hcd_adm5120_driver = {
- .probe = usb_hcd_adm5120_probe,
- .remove = usb_hcd_adm5120_remove,
- .shutdown = usb_hcd_platform_shutdown,
- .suspend = usb_hcd_adm5120_suspend,
- .resume = usb_hcd_adm5120_resume,
- .driver = {
- .name = "adm5120-hcd",
- .owner = THIS_MODULE,
- },
-};
-
diff --git a/target/linux/adm5120/files/drivers/usb/host/adm5120-hcd.c b/target/linux/adm5120/files/drivers/usb/host/adm5120-hcd.c
deleted file mode 100644
index 72a2525308..0000000000
--- a/target/linux/adm5120/files/drivers/usb/host/adm5120-hcd.c
+++ /dev/null
@@ -1,845 +0,0 @@
-/*
- * ADM5120 HCD (Host Controller Driver) for USB
- *
- * Copyright (C) 2007,2008 Gabor Juhos <juhosg at openwrt.org>
- *
- * This file was derived from: drivers/usb/host/ohci-hcd.c
- * (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
- * (C) Copyright 2000-2004 David Brownell <dbrownell@users.sourceforge.net>
- *
- * [ Initialisation is based on Linus' ]
- * [ uhci code and gregs ahcd fragments ]
- * [ (C) Copyright 1999 Linus Torvalds ]
- * [ (C) Copyright 1999 Gregory P. Smith]
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- *
- */
-
-#include <linux/module.h>
-#include <linux/moduleparam.h>
-#include <linux/pci.h>
-#include <linux/kernel.h>
-#include <linux/delay.h>
-#include <linux/ioport.h>
-#include <linux/sched.h>
-#include <linux/slab.h>
-#include <linux/errno.h>
-#include <linux/init.h>
-#include <linux/timer.h>
-#include <linux/list.h>
-#include <linux/usb.h>
-#include <linux/usb/otg.h>
-#include <linux/dma-mapping.h>
-#include <linux/dmapool.h>
-#include <linux/reboot.h>
-#include <linux/debugfs.h>
-
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/system.h>
-#include <asm/unaligned.h>
-#include <asm/byteorder.h>
-
-#include "../core/hcd.h"
-#include "../core/hub.h"
-
-#define DRIVER_VERSION "0.25.0"
-#define DRIVER_AUTHOR "Gabor Juhos <juhosg at openwrt.org>"
-#define DRIVER_DESC "ADMtek USB 1.1 Host Controller Driver"
-
-/*-------------------------------------------------------------------------*/
-
-#undef ADMHC_VERBOSE_DEBUG /* not always helpful */
-
-/* For initializing controller (mask in an HCFS mode too) */
-#define OHCI_CONTROL_INIT OHCI_CTRL_CBSR
-
-#define ADMHC_INTR_INIT \
- ( ADMHC_INTR_MIE | ADMHC_INTR_INSM | ADMHC_INTR_FATI \
- | ADMHC_INTR_RESI | ADMHC_INTR_TDC | ADMHC_INTR_BABI )
-
-/*-------------------------------------------------------------------------*/
-
-static const char hcd_name [] = "admhc-hcd";
-
-#define STATECHANGE_DELAY msecs_to_jiffies(300)
-
-#include "adm5120.h"
-
-static void admhc_dump(struct admhcd *ahcd, int verbose);
-static int admhc_init(struct admhcd *ahcd);
-static void admhc_stop(struct usb_hcd *hcd);
-
-#include "adm5120-dbg.c"
-#include "adm5120-mem.c"
-#include "adm5120-pm.c"
-#include "adm5120-hub.c"
-#include "adm5120-q.c"
-
-/*-------------------------------------------------------------------------*/
-
-/*
- * queue up an urb for anything except the root hub
- */
-static int admhc_urb_enqueue(struct usb_hcd *hcd, struct urb *urb,
- gfp_t mem_flags)
-{
- struct admhcd *ahcd = hcd_to_admhcd(hcd);
- struct ed *ed;
- struct urb_priv *urb_priv;
- unsigned int pipe = urb->pipe;
- int td_cnt = 0;
- unsigned long flags;
- int ret = 0;
-
-#ifdef ADMHC_VERBOSE_DEBUG
- spin_lock_irqsave(&ahcd->lock, flags);
- urb_print(ahcd, urb, "ENQEUE", usb_pipein(pipe), -EINPROGRESS);
- spin_unlock_irqrestore(&ahcd->lock, flags);
-#endif
-
- /* every endpoint has an ed, locate and maybe (re)initialize it */
- ed = ed_get(ahcd, urb->ep, urb->dev, pipe, urb->interval);
- if (!ed)
- return -ENOMEM;
-
- /* for the private part of the URB we need the number of TDs */
- switch (ed->type) {
- case PIPE_CONTROL:
- if (urb->transfer_buffer_length > TD_DATALEN_MAX)
- /* td_submit_urb() doesn't yet handle these */
- return -EMSGSIZE;
-
- /* 1 TD for setup, 1 for ACK, plus ... */
- td_cnt = 2;
- /* FALLTHROUGH */
- case PIPE_BULK:
- /* one TD for every 4096 Bytes (can be upto 8K) */
- td_cnt += urb->transfer_buffer_length / TD_DATALEN_MAX;
- /* ... and for any remaining bytes ... */
- if ((urb->transfer_buffer_length % TD_DATALEN_MAX) != 0)
- td_cnt++;
- /* ... and maybe a zero length packet to wrap it up */
- if (td_cnt == 0)
- td_cnt++;
- else if ((urb->transfer_flags & URB_ZERO_PACKET) != 0
- && (urb->transfer_buffer_length
- % usb_maxpacket(urb->dev, pipe,
- usb_pipeout (pipe))) == 0)
- td_cnt++;
- break;
- case PIPE_INTERRUPT:
- /*
- * for Interrupt IN/OUT transactions, each ED contains
- * only 1 TD.
- * TODO: check transfer_buffer_length?
- */
- td_cnt = 1;
- break;
- case PIPE_ISOCHRONOUS:
- /* number of packets from URB */
- td_cnt = urb->number_of_packets;
- break;
- }
-
- urb_priv = urb_priv_alloc(ahcd, td_cnt, mem_flags);
- if (!urb_priv)
- return -ENOMEM;
-
- urb_priv->ed = ed;
-
- spin_lock_irqsave(&ahcd->lock, flags);
- /* don't submit to a dead HC */
- if (!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags)) {
- ret = -ENODEV;
- goto fail;
- }
- if (!HC_IS_RUNNING(hcd->state)) {
- ret = -ENODEV;
- goto fail;
- }
-
- ret = usb_hcd_link_urb_to_ep(hcd, urb);
- if (ret)
- goto fail;
-
- /* schedule the ed if needed */
- if (ed->state == ED_IDLE) {
- ret = ed_schedule(ahcd, ed);
- if (ret < 0) {
- usb_hcd_unlink_urb_from_ep(hcd, urb);
- goto fail;
- }
- if (ed->type == PIPE_ISOCHRONOUS) {
- u16 frame = admhc_frame_no(ahcd);
-
- /* delay a few frames before the first TD */
- frame += max_t (u16, 8, ed->interval);
- frame &= ~(ed->interval - 1);
- frame |= ed->branch;
- urb->start_frame = frame;
-
- /* yes, only URB_ISO_ASAP is supported, and
- * urb->start_frame is never used as input.
- */
- }
- } else if (ed->type == PIPE_ISOCHRONOUS)
- urb->start_frame = ed->last_iso + ed->interval;
-
- /* fill the TDs and link them to the ed; and
- * enable that part of the schedule, if needed
- * and update count of queued periodic urbs
- */
- urb->hcpriv = urb_priv;
- td_submit_urb(ahcd, urb);
-
-#ifdef ADMHC_VERBOSE_DEBUG
- admhc_dump_ed(ahcd, "admhc_urb_enqueue", urb_priv->ed, 1);
-#endif
-
-fail:
- if (ret)
- urb_priv_free(ahcd, urb_priv);
-
- spin_unlock_irqrestore(&ahcd->lock, flags);
- return ret;
-}
-
-/*
- * decouple the URB from the HC queues (TDs, urb_priv);
- * reporting is always done
- * asynchronously, and we might be dealing with an urb that's
- * partially transferred, or an ED with other urbs being unlinked.
- */
-static int admhc_urb_dequeue(struct usb_hcd *hcd, struct urb *urb,
- int status)
-{
- struct admhcd *ahcd = hcd_to_admhcd(hcd);
- unsigned long flags;
- int ret;
-
- spin_lock_irqsave(&ahcd->lock, flags);
-
-#ifdef ADMHC_VERBOSE_DEBUG
- urb_print(ahcd, urb, "DEQUEUE", 1, status);
-#endif
- ret = usb_hcd_check_unlink_urb(hcd, urb, status);
- if (ret) {
- /* Do nothing */
- ;
- } else if (HC_IS_RUNNING(hcd->state)) {
- struct urb_priv *urb_priv;
-
- /* Unless an IRQ completed the unlink while it was being
- * handed to us, flag it for unlink and giveback, and force
- * some upcoming INTR_SF to call finish_unlinks()
- */
- urb_priv = urb->hcpriv;
- if (urb_priv) {
- if (urb_priv->ed->state == ED_OPER)
- start_ed_unlink(ahcd, urb_priv->ed);
- }
- } else {
- /*
- * with HC dead, we won't respect hc queue pointers
- * any more ... just clean up every urb's memory.
- */
- if (urb->hcpriv)
- finish_urb(ahcd, urb, status);
- }
- spin_unlock_irqrestore(&ahcd->lock, flags);
-
- return ret;
-}
-
-/*-------------------------------------------------------------------------*/
-
-/* frees config/altsetting state for endpoints,
- * including ED memory, dummy TD, and bulk/intr data toggle
- */
-
-static void admhc_endpoint_disable(struct usb_hcd *hcd,
- struct usb_host_endpoint *ep)
-{
- struct admhcd *ahcd = hcd_to_admhcd(hcd);
- unsigned long flags;
- struct ed *ed = ep->hcpriv;
- unsigned limit = 1000;
-
- /* ASSERT: any requests/urbs are being unlinked */
- /* ASSERT: nobody can be submitting urbs for this any more */
-
- if (!ed)
- return;
-
-#ifdef ADMHC_VERBOSE_DEBUG
- spin_lock_irqsave(&ahcd->lock, flags);
- admhc_dump_ed(ahcd, "EP-DISABLE", ed, 1);
- spin_unlock_irqrestore(&ahcd->lock, flags);
-#endif
-
-rescan:
- spin_lock_irqsave(&ahcd->lock, flags);
-
- if (!HC_IS_RUNNING(hcd->state)) {
-sanitize:
- ed->state = ED_IDLE;
- finish_unlinks(ahcd, 0);
- }
-
- switch (ed->state) {
- case ED_UNLINK: /* wait for hw to finish? */
- /* major IRQ delivery trouble loses INTR_SOFI too... */
- if (limit-- == 0) {
- admhc_warn(ahcd, "IRQ INTR_SOFI lossage\n");
- goto sanitize;
- }
- spin_unlock_irqrestore(&ahcd->lock, flags);
- schedule_timeout_uninterruptible(1);
- goto rescan;
- case ED_IDLE: /* fully unlinked */
- if (list_empty(&ed->td_list)) {
- td_free (ahcd, ed->dummy);
- ed_free (ahcd, ed);
- break;
- }
- /* else FALL THROUGH */
- default:
- /* caller was supposed to have unlinked any requests;
- * that's not our job. can't recover; must leak ed.
- */
- admhc_err(ahcd, "leak ed %p (#%02x) state %d%s\n",
- ed, ep->desc.bEndpointAddress, ed->state,
- list_empty(&ed->td_list) ? "" : " (has tds)");
- td_free(ahcd, ed->dummy);
- break;
- }
-
- ep->hcpriv = NULL;
-
- spin_unlock_irqrestore(&ahcd->lock, flags);
- return;
-}
-
-static int admhc_get_frame_number(struct usb_hcd *hcd)
-{
- struct admhcd *ahcd = hcd_to_admhcd(hcd);
-
- return admhc_frame_no(ahcd);
-}
-
-static void admhc_usb_reset(struct admhcd *ahcd)
-{
-#if 0
- ahcd->hc_control = admhc_readl(ahcd, &ahcd->regs->control);
- ahcd->hc_control &= OHCI_CTRL_RWC;
- admhc_writel(ahcd, ahcd->hc_control, &ahcd->regs->control);
-#else
- /* FIXME */
- ahcd->host_control = ADMHC_BUSS_RESET;
- admhc_writel(ahcd, ahcd->host_control ,&ahcd->regs->host_control);
-#endif
-}
-
-/* admhc_shutdown forcibly disables IRQs and DMA, helping kexec and
- * other cases where the next software may expect clean state from the
- * "firmware". this is bus-neutral, unlike shutdown() methods.
- */
-static void
-admhc_shutdown(struct usb_hcd *hcd)
-{
- struct admhcd *ahcd;
-
- ahcd = hcd_to_admhcd(hcd);
- admhc_intr_disable(ahcd, ADMHC_INTR_MIE);
- admhc_dma_disable(ahcd);
- admhc_usb_reset(ahcd);
- /* flush the writes */
- admhc_writel_flush(ahcd);
-}
-
-/*-------------------------------------------------------------------------*
- * HC functions
- *-------------------------------------------------------------------------*/
-
-static void admhc_eds_cleanup(struct admhcd *ahcd)
-{
- if (ahcd->ed_tails[PIPE_INTERRUPT]) {
- ed_free(ahcd, ahcd->ed_tails[PIPE_INTERRUPT]);
- ahcd->ed_tails[PIPE_INTERRUPT] = NULL;
- }
-
- if (ahcd->ed_tails[PIPE_ISOCHRONOUS]) {
- ed_free(ahcd, ahcd->ed_tails[PIPE_ISOCHRONOUS]);
- ahcd->ed_tails[PIPE_ISOCHRONOUS] = NULL;
- }
-
- if (ahcd->ed_tails[PIPE_CONTROL]) {
- ed_free(ahcd, ahcd->ed_tails[PIPE_CONTROL]);
- ahcd->ed_tails[PIPE_CONTROL] = NULL;
- }
-
- if (ahcd->ed_tails[PIPE_BULK]) {
- ed_free(ahcd, ahcd->ed_tails[PIPE_BULK]);
- ahcd->ed_tails[PIPE_BULK] = NULL;
- }
-
- ahcd->ed_head = NULL;
-}
-
-#define ED_DUMMY_INFO (ED_SPEED_FULL | ED_SKIP)
-
-static int admhc_eds_init(struct admhcd *ahcd)
-{
- struct ed *ed;
-
- ed = ed_create(ahcd, PIPE_INTERRUPT, ED_DUMMY_INFO);
- if (!ed)
- goto err;
-
- ahcd->ed_tails[PIPE_INTERRUPT] = ed;
-
- ed = ed_create(ahcd, PIPE_ISOCHRONOUS, ED_DUMMY_INFO);
- if (!ed)
- goto err;
-
- ahcd->ed_tails[PIPE_ISOCHRONOUS] = ed;
- ed->ed_prev = ahcd->ed_tails[PIPE_INTERRUPT];
- ahcd->ed_tails[PIPE_INTERRUPT]->ed_next = ed;
- ahcd->ed_tails[PIPE_INTERRUPT]->hwNextED = cpu_to_hc32(ahcd, ed->dma);
-
- ed = ed_create(ahcd, PIPE_CONTROL, ED_DUMMY_INFO);
- if (!ed)
- goto err;
-
- ahcd->ed_tails[PIPE_CONTROL] = ed;
- ed->ed_prev = ahcd->ed_tails[PIPE_ISOCHRONOUS];
- ahcd->ed_tails[PIPE_ISOCHRONOUS]->ed_next = ed;
- ahcd->ed_tails[PIPE_ISOCHRONOUS]->hwNextED = cpu_to_hc32(ahcd, ed->dma);
-
- ed = ed_create(ahcd, PIPE_BULK, ED_DUMMY_INFO);
- if (!ed)
- goto err;
-
- ahcd->ed_tails[PIPE_BULK] = ed;
- ed->ed_prev = ahcd->ed_tails[PIPE_CONTROL];
- ahcd->ed_tails[PIPE_CONTROL]->ed_next = ed;
- ahcd->ed_tails[PIPE_CONTROL]->hwNextED = cpu_to_hc32(ahcd, ed->dma);
-
- ahcd->ed_head = ahcd->ed_tails[PIPE_INTERRUPT];
-
-#ifdef ADMHC_VERBOSE_DEBUG
- admhc_dump_ed(ahcd, "ed intr", ahcd->ed_tails[PIPE_INTERRUPT], 1);
- admhc_dump_ed(ahcd, "ed isoc", ahcd->ed_tails[PIPE_ISOCHRONOUS], 1);
- admhc_dump_ed(ahcd, "ed ctrl", ahcd->ed_tails[PIPE_CONTROL], 1);
- admhc_dump_ed(ahcd, "ed bulk", ahcd->ed_tails[PIPE_BULK], 1);
-#endif
-
- return 0;
-
-err:
- admhc_eds_cleanup(ahcd);
- return -ENOMEM;
-}
-
-/* init memory, and kick BIOS/SMM off */
-
-static int admhc_init(struct admhcd *ahcd)
-{
- struct usb_hcd *hcd = admhcd_to_hcd(ahcd);
- int ret;
-
- admhc_disable(ahcd);
- ahcd->regs = hcd->regs;
-
- /* Disable HC interrupts */
- admhc_intr_disable(ahcd, ADMHC_INTR_MIE);
-
- /* Read the number of ports unless overridden */
- if (ahcd->num_ports == 0)
- ahcd->num_ports = admhc_read_rhdesc(ahcd) & ADMHC_RH_NUMP;
-
- ret = admhc_mem_init(ahcd);
- if (ret)
- goto err;
-
- /* init dummy endpoints */
- ret = admhc_eds_init(ahcd);
- if (ret)
- goto err;
-
- create_debug_files(ahcd);
-
- return 0;
-
-err:
- admhc_stop(hcd);
- return ret;
-}
-
-/*-------------------------------------------------------------------------*/
-
-/* Start an OHCI controller, set the BUS operational
- * resets USB and controller
- * enable interrupts
- */
-static int admhc_run(struct admhcd *ahcd)
-{
- u32 temp;
- int first = ahcd->fminterval == 0;
- struct usb_hcd *hcd = admhcd_to_hcd(ahcd);
-
- admhc_disable(ahcd);
-
- /* boot firmware should have set this up (5.1.1.3.1) */
- if (first) {
- temp = admhc_readl(ahcd, &ahcd->regs->fminterval);
- ahcd->fminterval = temp & ADMHC_SFI_FI_MASK;
- if (ahcd->fminterval != FI)
- admhc_dbg(ahcd, "fminterval delta %d\n",
- ahcd->fminterval - FI);
- ahcd->fminterval |=
- (FSLDP(ahcd->fminterval) << ADMHC_SFI_FSLDP_SHIFT);
- /* also: power/overcurrent flags in rhdesc */
- }
-
-#if 0 /* TODO: not applicable */
- /* Reset USB nearly "by the book". RemoteWakeupConnected was
- * saved if boot firmware (BIOS/SMM/...) told us it's connected,
- * or if bus glue did the same (e.g. for PCI add-in cards with
- * PCI PM support).
- */
- if ((ahcd->hc_control & OHCI_CTRL_RWC) != 0
- && !device_may_wakeup(hcd->self.controller))
- device_init_wakeup(hcd->self.controller, 1);
-#endif
-
- switch (ahcd->host_control & ADMHC_HC_BUSS) {
- case ADMHC_BUSS_OPER:
- temp = 0;
- break;
- case ADMHC_BUSS_SUSPEND:
- /* FALLTHROUGH ? */
- case ADMHC_BUSS_RESUME:
- ahcd->host_control = ADMHC_BUSS_RESUME;
- temp = 10 /* msec wait */;
- break;
- /* case ADMHC_BUSS_RESET: */
- default:
- ahcd->host_control = ADMHC_BUSS_RESET;
- temp = 50 /* msec wait */;
- break;
- }
- admhc_writel(ahcd, ahcd->host_control, &ahcd->regs->host_control);
-
- /* flush the writes */
- admhc_writel_flush(ahcd);
-
- msleep(temp);
- temp = admhc_read_rhdesc(ahcd);
- if (!(temp & ADMHC_RH_NPS)) {
- /* power down each port */
- for (temp = 0; temp < ahcd->num_ports; temp++)
- admhc_write_portstatus(ahcd, temp, ADMHC_PS_CPP);
- }
- /* flush those writes */
- admhc_writel_flush(ahcd);
-
- /* 2msec timelimit here means no irqs/preempt */
- spin_lock_irq(&ahcd->lock);
-
- admhc_writel(ahcd, ADMHC_CTRL_SR, &ahcd->regs->gencontrol);
- temp = 30; /* ... allow extra time */
- while ((admhc_readl(ahcd, &ahcd->regs->gencontrol) & ADMHC_CTRL_SR) != 0) {
- if (--temp == 0) {
- spin_unlock_irq(&ahcd->lock);
- admhc_err(ahcd, "USB HC reset timed out!\n");
- return -1;
- }
- udelay(1);
- }
-
- /* enable HOST mode, before access any host specific register */
- admhc_writel(ahcd, ADMHC_CTRL_UHFE, &ahcd->regs->gencontrol);
-
- /* Tell the controller where the descriptor list is */
- admhc_writel(ahcd, (u32)ahcd->ed_head->dma, &ahcd->regs->hosthead);
-
- periodic_reinit(ahcd);
-
- /* use rhsc irqs after khubd is fully initialized */
- hcd->poll_rh = 1;
- hcd->uses_new_polling = 1;
-
-#if 0
- /* wake on ConnectStatusChange, matching external hubs */
- admhc_writel(ahcd, RH_HS_DRWE, &ahcd->regs->roothub.status);
-#else
- /* FIXME roothub_write_status (ahcd, ADMHC_RH_DRWE); */
-#endif
-
- /* Choose the interrupts we care about now, others later on demand */
- admhc_intr_ack(ahcd, ~0);
- admhc_intr_enable(ahcd, ADMHC_INTR_INIT);
-
- admhc_writel(ahcd, ADMHC_RH_NPS | ADMHC_RH_LPSC, &ahcd->regs->rhdesc);
-
- /* flush those writes */
- admhc_writel_flush(ahcd);
-
- /* start controller operations */
- ahcd->host_control = ADMHC_BUSS_OPER;
- admhc_writel(ahcd, ahcd->host_control, &ahcd->regs->host_control);
-
- temp = 20;
- while ((admhc_readl(ahcd, &ahcd->regs->host_control)
- & ADMHC_HC_BUSS) != ADMHC_BUSS_OPER) {
- if (--temp == 0) {
- spin_unlock_irq(&ahcd->lock);
- admhc_err(ahcd, "unable to setup operational mode!\n");
- return -1;
- }
- mdelay(1);
- }
-
- hcd->state = HC_STATE_RUNNING;
-
- ahcd->next_statechange = jiffies + STATECHANGE_DELAY;
-
-#if 0
- /* FIXME: enabling DMA is always failed here for an unknown reason */
- admhc_dma_enable(ahcd);
-
- temp = 200;
- while ((admhc_readl(ahcd, &ahcd->regs->host_control)
- & ADMHC_HC_DMAE) != ADMHC_HC_DMAE) {
- if (--temp == 0) {
- spin_unlock_irq(&ahcd->lock);
- admhc_err(ahcd, "unable to enable DMA!\n");
- admhc_dump(ahcd, 1);
- return -1;
- }
- mdelay(1);
- }
-
-#endif
-
- spin_unlock_irq(&ahcd->lock);
-
- mdelay(ADMHC_POTPGT);
-
- return 0;
-}
-
-/*-------------------------------------------------------------------------*/
-
-/* an interrupt happens */
-
-static irqreturn_t admhc_irq(struct usb_hcd *hcd)
-{
- struct admhcd *ahcd = hcd_to_admhcd(hcd);
- struct admhcd_regs __iomem *regs = ahcd->regs;
- u32 ints;
-
- ints = admhc_readl(ahcd, &regs->int_status);
- if ((ints & ADMHC_INTR_INTA) == 0) {
- /* no unmasked interrupt status is set */
- return IRQ_NONE;
- }
-
- ints &= admhc_readl(ahcd, &regs->int_enable);
-
- if (ints & ADMHC_INTR_FATI) {
- /* e.g. due to PCI Master/Target Abort */
- admhc_disable(ahcd);
- admhc_err(ahcd, "Fatal Error, controller disabled\n");
- admhc_dump(ahcd, 1);
- admhc_usb_reset(ahcd);
- }
-
- if (ints & ADMHC_INTR_BABI) {
- admhc_intr_disable(ahcd, ADMHC_INTR_BABI);
- admhc_intr_ack(ahcd, ADMHC_INTR_BABI);
- admhc_err(ahcd, "Babble Detected\n");
- }
-
- if (ints & ADMHC_INTR_INSM) {
- admhc_vdbg(ahcd, "Root Hub Status Change\n");
- ahcd->next_statechange = jiffies + STATECHANGE_DELAY;
- admhc_intr_ack(ahcd, ADMHC_INTR_RESI | ADMHC_INTR_INSM);
-
- /* NOTE: Vendors didn't always make the same implementation
- * choices for RHSC. Many followed the spec; RHSC triggers
- * on an edge, like setting and maybe clearing a port status
- * change bit. With others it's level-triggered, active
- * until khubd clears all the port status change bits. We'll
- * always disable it here and rely on polling until khubd
- * re-enables it.
- */
- admhc_intr_disable(ahcd, ADMHC_INTR_INSM);
- usb_hcd_poll_rh_status(hcd);
- } else if (ints & ADMHC_INTR_RESI) {
- /* For connect and disconnect events, we expect the controller
- * to turn on RHSC along with RD. But for remote wakeup events
- * this might not happen.
- */
- admhc_vdbg(ahcd, "Resume Detect\n");
- admhc_intr_ack(ahcd, ADMHC_INTR_RESI);
- hcd->poll_rh = 1;
- if (ahcd->autostop) {
- spin_lock(&ahcd->lock);
- admhc_rh_resume(ahcd);
- spin_unlock(&ahcd->lock);
- } else
- usb_hcd_resume_root_hub(hcd);
- }
-
- if (ints & ADMHC_INTR_TDC) {
- admhc_vdbg(ahcd, "Transfer Descriptor Complete\n");
- admhc_intr_ack(ahcd, ADMHC_INTR_TDC);
- if (HC_IS_RUNNING(hcd->state))
- admhc_intr_disable(ahcd, ADMHC_INTR_TDC);
- spin_lock(&ahcd->lock);
- admhc_td_complete(ahcd);
- spin_unlock(&ahcd->lock);
- if (HC_IS_RUNNING(hcd->state))
- admhc_intr_enable(ahcd, ADMHC_INTR_TDC);
- }
-
- if (ints & ADMHC_INTR_SO) {
- /* could track INTR_SO to reduce available PCI/... bandwidth */
- admhc_vdbg(ahcd, "Schedule Overrun\n");
- }
-
-#if 1
- spin_lock(&ahcd->lock);
- if (ahcd->ed_rm_list)
- finish_unlinks(ahcd, admhc_frame_no(ahcd));
-
- if ((ints & ADMHC_INTR_SOFI) != 0 && !ahcd->ed_rm_list
- && HC_IS_RUNNING(hcd->state))
- admhc_intr_disable(ahcd, ADMHC_INTR_SOFI);
- spin_unlock(&ahcd->lock);
-#else
- if (ints & ADMHC_INTR_SOFI) {
- admhc_vdbg(ahcd, "Start Of Frame\n");
- spin_lock(&ahcd->lock);
-
- /* handle any pending ED removes */
- finish_unlinks(ahcd, admhc_frameno(ahcd));
-
- /* leaving INTR_SOFI enabled when there's still unlinking
- * to be done in the (next frame).
- */
- if ((ahcd->ed_rm_list == NULL) ||
- HC_IS_RUNNING(hcd->state) == 0)
- /*
- * disable INTR_SOFI if there are no unlinking to be
- * done (in the next frame)
- */
- admhc_intr_disable(ahcd, ADMHC_INTR_SOFI);
-
- spin_unlock(&ahcd->lock);
- }
-#endif
-
- if (HC_IS_RUNNING(hcd->state)) {
- admhc_intr_ack(ahcd, ints);
- admhc_intr_enable(ahcd, ADMHC_INTR_MIE);
- admhc_writel_flush(ahcd);
- }
-
- return IRQ_HANDLED;
-}
-
-/*-------------------------------------------------------------------------*/
-
-static void admhc_stop(struct usb_hcd *hcd)
-{
- struct admhcd *ahcd = hcd_to_admhcd(hcd);
-
- admhc_dump(ahcd, 1);
-
- flush_scheduled_work();
-
- admhc_usb_reset(ahcd);
- admhc_intr_disable(ahcd, ADMHC_INTR_MIE);
-
- free_irq(hcd->irq, hcd);
- hcd->irq = -1;
-
- remove_debug_files(ahcd);
- admhc_eds_cleanup(ahcd);
- admhc_mem_cleanup(ahcd);
-}
-
-/*-------------------------------------------------------------------------*/
-
-#ifdef CONFIG_MIPS_ADM5120
-#include "adm5120-drv.c"
-#define PLATFORM_DRIVER usb_hcd_adm5120_driver
-#endif
-
-#if !defined(PLATFORM_DRIVER)
-#error "missing bus glue for admhc-hcd"
-#endif
-
-#define DRIVER_INFO DRIVER_DESC " version " DRIVER_VERSION
-
-static int __init admhc_hcd_mod_init(void)
-{
- int ret = 0;
-
- if (usb_disabled())
- return -ENODEV;
-
- pr_info("%s: " DRIVER_INFO "\n", hcd_name);
- pr_info("%s: block sizes: ed %Zd td %Zd\n", hcd_name,
- sizeof (struct ed), sizeof (struct td));
-
-#ifdef DEBUG
- admhc_debug_root = debugfs_create_dir("admhc", NULL);
- if (!admhc_debug_root) {
- ret = -ENOENT;
- goto error_debug;
- }
-#endif
-
-#ifdef PLATFORM_DRIVER
- ret = platform_driver_register(&PLATFORM_DRIVER);
- if (ret < 0)
- goto error_platform;
-#endif
-
- return ret;
-
-#ifdef PLATFORM_DRIVER
- platform_driver_unregister(&PLATFORM_DRIVER);
-error_platform:
-#endif
-
-#ifdef DEBUG
- debugfs_remove(admhc_debug_root);
- admhc_debug_root = NULL;
-error_debug:
-#endif
- return ret;
-}
-module_init(admhc_hcd_mod_init);
-
-static void __exit admhc_hcd_mod_exit(void)
-{
- platform_driver_unregister(&PLATFORM_DRIVER);
-#ifdef DEBUG
- debugfs_remove(admhc_debug_root);
-#endif
-}
-module_exit(admhc_hcd_mod_exit);
-
-MODULE_AUTHOR(DRIVER_AUTHOR);
-MODULE_DESCRIPTION(DRIVER_INFO);
-MODULE_VERSION(DRIVER_VERSION);
-MODULE_LICENSE("GPL v2");
diff --git a/target/linux/adm5120/files/drivers/usb/host/adm5120-hub.c b/target/linux/adm5120/files/drivers/usb/host/adm5120-hub.c
deleted file mode 100644
index 4fd826d55d..0000000000
--- a/target/linux/adm5120/files/drivers/usb/host/adm5120-hub.c
+++ /dev/null
@@ -1,441 +0,0 @@
-/*
- * ADM5120 HCD (Host Controller Driver) for USB
- *
- * Copyright (C) 2007,2008 Gabor Juhos <juhosg at openwrt.org>
- *
- * This file was derived from: drivers/usb/host/ohci-hub.c
- * (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
- * (C) Copyright 2000-2004 David Brownell <dbrownell@users.sourceforge.net>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- *
- */
-
-/*-------------------------------------------------------------------------*/
-
-/*
- * ADM5120 Root Hub ... the nonsharable stuff
- */
-
-#define dbg_port(hc,label,num,value) \
- admhc_dbg(hc, \
- "%s port%d " \
- "= 0x%08x%s%s%s%s%s%s%s%s%s%s%s%s\n", \
- label, num, value, \
- (value & ADMHC_PS_PRSC) ? " PRSC" : "", \
- (value & ADMHC_PS_OCIC) ? " OCIC" : "", \
- (value & ADMHC_PS_PSSC) ? " PSSC" : "", \
- (value & ADMHC_PS_PESC) ? " PESC" : "", \
- (value & ADMHC_PS_CSC) ? " CSC" : "", \
- \
- (value & ADMHC_PS_LSDA) ? " LSDA" : "", \
- (value & ADMHC_PS_PPS) ? " PPS" : "", \
- (value & ADMHC_PS_PRS) ? " PRS" : "", \
- (value & ADMHC_PS_POCI) ? " POCI" : "", \
- (value & ADMHC_PS_PSS) ? " PSS" : "", \
- \
- (value & ADMHC_PS_PES) ? " PES" : "", \
- (value & ADMHC_PS_CCS) ? " CCS" : "" \
- );
-
-#define dbg_port_write(hc,label,num,value) \
- admhc_dbg(hc, \
- "%s port%d " \
- "= 0x%08x%s%s%s%s%s%s%s%s%s%s%s%s\n", \
- label, num, value, \
- (value & ADMHC_PS_PRSC) ? " PRSC" : "", \
- (value & ADMHC_PS_OCIC) ? " OCIC" : "", \
- (value & ADMHC_PS_PSSC) ? " PSSC" : "", \
- (value & ADMHC_PS_PESC) ? " PESC" : "", \
- (value & ADMHC_PS_CSC) ? " CSC" : "", \
- \
- (value & ADMHC_PS_CPP) ? " CPP" : "", \
- (value & ADMHC_PS_SPP) ? " SPP" : "", \
- (value & ADMHC_PS_SPR) ? " SPR" : "", \
- (value & ADMHC_PS_CPS) ? " CPS" : "", \
- (value & ADMHC_PS_SPS) ? " SPS" : "", \
- \
- (value & ADMHC_PS_SPE) ? " SPE" : "", \
- (value & ADMHC_PS_CPE) ? " CPE" : "" \
- );
-
-/*-------------------------------------------------------------------------*/
-
-/* hcd->hub_irq_enable() */
-static void admhc_hub_irq_enable(struct usb_hcd *hcd)
-{
- struct admhcd *ahcd = hcd_to_admhcd(hcd);
-
- spin_lock_irq(&ahcd->lock);
- if (!ahcd->autostop)
- del_timer(&hcd->rh_timer); /* Prevent next poll */
- admhc_intr_enable(ahcd, ADMHC_INTR_INSM);
- spin_unlock_irq(&ahcd->lock);
-}
-
-/*-------------------------------------------------------------------------*/
-
-/* build "status change" packet (one or two bytes) from HC registers */
-
-static int
-admhc_hub_status_data(struct usb_hcd *hcd, char *buf)
-{
- struct admhcd *ahcd = hcd_to_admhcd(hcd);
- int i, changed = 0, length = 1;
- int any_connected = 0;
- unsigned long flags;
- u32 status;
-
- spin_lock_irqsave(&ahcd->lock, flags);
- if (!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags))
- goto done;
-
- /* init status */
- status = admhc_read_rhdesc(ahcd);
- if (status & (ADMHC_RH_LPSC | ADMHC_RH_OCIC))
- buf [0] = changed = 1;
- else
- buf [0] = 0;
- if (ahcd->num_ports > 7) {
- buf [1] = 0;
- length++;
- }
-
- /* look at each port */
- for (i = 0; i < ahcd->num_ports; i++) {
- status = admhc_read_portstatus(ahcd, i);
-
- /* can't autostop if ports are connected */
- any_connected |= (status & ADMHC_PS_CCS);
-
- if (status & (ADMHC_PS_CSC | ADMHC_PS_PESC | ADMHC_PS_PSSC
- | ADMHC_PS_OCIC | ADMHC_PS_PRSC)) {
- changed = 1;
- if (i < 7)
- buf [0] |= 1 << (i + 1);
- else
- buf [1] |= 1 << (i - 7);
- }
- }
-
- hcd->poll_rh = admhc_root_hub_state_changes(ahcd, changed,
- any_connected);
-
-done:
- spin_unlock_irqrestore(&ahcd->lock, flags);
-
- return changed ? length : 0;
-}
-
-/*-------------------------------------------------------------------------*/
-
-static int admhc_get_hub_descriptor(struct admhcd *ahcd, char *buf)
-{
- struct usb_hub_descriptor *desc = (struct usb_hub_descriptor *)buf;
- u32 rh = admhc_read_rhdesc(ahcd);
- u16 temp;
-
- desc->bDescriptorType = USB_DT_HUB; /* Hub-descriptor */
- desc->bPwrOn2PwrGood = ADMHC_POTPGT/2; /* use default value */
- desc->bHubContrCurrent = 0x00; /* 0mA */
-
- desc->bNbrPorts = ahcd->num_ports;
- temp = 1 + (ahcd->num_ports / 8);
- desc->bDescLength = USB_DT_HUB_NONVAR_SIZE + 2 * temp;
-
- /* FIXME */
- temp = 0;
- if (rh & ADMHC_RH_NPS) /* no power switching? */
- temp |= 0x0002;
- if (rh & ADMHC_RH_PSM) /* per-port power switching? */
- temp |= 0x0001;
- if (rh & ADMHC_RH_NOCP) /* no overcurrent reporting? */
- temp |= 0x0010;
- else if (rh & ADMHC_RH_OCPM) /* per-port overcurrent reporting? */
- temp |= 0x0008;
- desc->wHubCharacteristics = (__force __u16)cpu_to_hc16(ahcd, temp);
-
- /* two bitmaps: ports removable, and usb 1.0 legacy PortPwrCtrlMask */
- desc->bitmap[0] = 0;
- desc->bitmap[0] = ~0;
-
- return 0;
-}
-
-static int admhc_get_hub_status(struct admhcd *ahcd, char *buf)
-{
- struct usb_hub_status *hs = (struct usb_hub_status *)buf;
- u32 t = admhc_read_rhdesc(ahcd);
- u16 status, change;
-
- status = 0;
- status |= (t & ADMHC_RH_LPS) ? HUB_STATUS_LOCAL_POWER : 0;
- status |= (t & ADMHC_RH_OCI) ? HUB_STATUS_OVERCURRENT : 0;
-
- change = 0;
- change |= (t & ADMHC_RH_LPSC) ? HUB_CHANGE_LOCAL_POWER : 0;
- change |= (t & ADMHC_RH_OCIC) ? HUB_CHANGE_OVERCURRENT : 0;
-
- hs->wHubStatus = (__force __u16)cpu_to_hc16(ahcd, status);
- hs->wHubChange = (__force __u16)cpu_to_hc16(ahcd, change);
-
- return 0;
-}
-
-static int admhc_get_port_status(struct admhcd *ahcd, unsigned port, char *buf)
-{
- struct usb_port_status *ps = (struct usb_port_status *)buf;
- u32 t = admhc_read_portstatus(ahcd, port);
- u16 status, change;
-
- status = 0;
- status |= (t & ADMHC_PS_CCS) ? USB_PORT_STAT_CONNECTION : 0;
- status |= (t & ADMHC_PS_PES) ? USB_PORT_STAT_ENABLE : 0;
- status |= (t & ADMHC_PS_PSS) ? USB_PORT_STAT_SUSPEND : 0;
- status |= (t & ADMHC_PS_POCI) ? USB_PORT_STAT_OVERCURRENT : 0;
- status |= (t & ADMHC_PS_PRS) ? USB_PORT_STAT_RESET : 0;
- status |= (t & ADMHC_PS_PPS) ? USB_PORT_STAT_POWER : 0;
- status |= (t & ADMHC_PS_LSDA) ? USB_PORT_STAT_LOW_SPEED : 0;
-
- change = 0;
- change |= (t & ADMHC_PS_CSC) ? USB_PORT_STAT_C_CONNECTION : 0;
- change |= (t & ADMHC_PS_PESC) ? USB_PORT_STAT_C_ENABLE : 0;
- change |= (t & ADMHC_PS_PSSC) ? USB_PORT_STAT_C_SUSPEND : 0;
- change |= (t & ADMHC_PS_OCIC) ? USB_PORT_STAT_C_OVERCURRENT : 0;
- change |= (t & ADMHC_PS_PRSC) ? USB_PORT_STAT_C_RESET : 0;
-
- ps->wPortStatus = (__force __u16)cpu_to_hc16(ahcd, status);
- ps->wPortChange = (__force __u16)cpu_to_hc16(ahcd, change);
-
- return 0;
-}
-
-/*-------------------------------------------------------------------------*/
-
-#ifdef CONFIG_USB_OTG
-
-static int admhc_start_port_reset(struct usb_hcd *hcd, unsigned port)
-{
- struct admhcd *ahcd = hcd_to_admhcd(hcd);
- u32 status;
-
- if (!port)
- return -EINVAL;
- port--;
-
- /* start port reset before HNP protocol times out */
- status = admhc_read_portstatus(ahcd, port);
- if (!(status & ADMHC_PS_CCS))
- return -ENODEV;
-
- /* khubd will finish the reset later */
- admhc_write_portstatus(ahcd, port, ADMHC_PS_PRS);
- return 0;
-}
-
-static void start_hnp(struct admhcd *ahcd);
-
-#else
-
-#define admhc_start_port_reset NULL
-
-#endif
-
-/*-------------------------------------------------------------------------*/
-
-
-/* See usb 7.1.7.5: root hubs must issue at least 50 msec reset signaling,
- * not necessarily continuous ... to guard against resume signaling.
- * The short timeout is safe for non-root hubs, and is backward-compatible
- * with earlier Linux hosts.
- */
-#ifdef CONFIG_USB_SUSPEND
-#define PORT_RESET_MSEC 50
-#else
-#define PORT_RESET_MSEC 10
-#endif
-
-/* this timer value might be vendor-specific ... */
-#define PORT_RESET_HW_MSEC 10
-
-/* wrap-aware logic morphed from <linux/jiffies.h> */
-#define tick_before(t1,t2) ((s16)(((s16)(t1))-((s16)(t2))) < 0)
-
-/* called from some task, normally khubd */
-static inline int admhc_port_reset(struct admhcd *ahcd, unsigned port)
-{
- u32 t;
-
- admhc_vdbg(ahcd, "reset port%d\n", port);
- t = admhc_read_portstatus(ahcd, port);
- if (!(t & ADMHC_PS_CCS))
- return -ENODEV;
-
- admhc_write_portstatus(ahcd, port, ADMHC_PS_SPR);
- mdelay(10);
- admhc_write_portstatus(ahcd, port, (ADMHC_PS_SPE | ADMHC_PS_CSC));
- mdelay(100);
-
- return 0;
-}
-
-static inline int admhc_port_enable(struct admhcd *ahcd, unsigned port)
-{
- u32 t;
-
- admhc_vdbg(ahcd, "enable port%d\n", port);
- t = admhc_read_portstatus(ahcd, port);
- if (!(t & ADMHC_PS_CCS))
- return -ENODEV;
-
- admhc_write_portstatus(ahcd, port, ADMHC_PS_SPE);
-
- return 0;
-}
-
-static inline int admhc_port_disable(struct admhcd *ahcd, unsigned port)
-{
- u32 t;
-
- admhc_vdbg(ahcd, "disable port%d\n", port);
- t = admhc_read_portstatus(ahcd, port);
- if (!(t & ADMHC_PS_CCS))
- return -ENODEV;
-
- admhc_write_portstatus(ahcd, port, ADMHC_PS_CPE);
-
- return 0;
-}
-
-static inline int admhc_port_write(struct admhcd *ahcd, unsigned port,
- u32 val)
-{
-#ifdef ADMHC_VERBOSE_DEBUG
- dbg_port_write(ahcd, "write", port, val);
-#endif
- admhc_write_portstatus(ahcd, port, val);
-
- return 0;
-}
-
-static int admhc_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
- u16 wIndex, char *buf, u16 wLength)
-{
- struct admhcd *ahcd = hcd_to_admhcd(hcd);
- int ports = hcd_to_bus(hcd)->root_hub->maxchild;
- int ret = 0;
-
- if (unlikely(!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags)))
- return -ESHUTDOWN;
-
- switch (typeReq) {
- case ClearHubFeature:
- switch (wValue) {
- case C_HUB_OVER_CURRENT:
-#if 0 /* FIXME */
- admhc_writel(ahcd, ADMHC_RH_OCIC,
- &ahcd->regs->roothub.status);
-#endif
- case C_HUB_LOCAL_POWER:
- break;
- default:
- goto error;
- }
- break;
- case ClearPortFeature:
- if (!wIndex || wIndex > ports)
- goto error;
- wIndex--;
-
- switch (wValue) {
- case USB_PORT_FEAT_ENABLE:
- ret = admhc_port_disable(ahcd, wIndex);
- break;
- case USB_PORT_FEAT_SUSPEND:
- ret = admhc_port_write(ahcd, wIndex, ADMHC_PS_CPS);
- break;
- case USB_PORT_FEAT_POWER:
- ret = admhc_port_write(ahcd, wIndex, ADMHC_PS_CPP);
- break;
- case USB_PORT_FEAT_C_CONNECTION:
- ret = admhc_port_write(ahcd, wIndex, ADMHC_PS_CSC);
- break;
- case USB_PORT_FEAT_C_ENABLE:
- ret = admhc_port_write(ahcd, wIndex, ADMHC_PS_PESC);
- break;
- case USB_PORT_FEAT_C_SUSPEND:
- ret = admhc_port_write(ahcd, wIndex, ADMHC_PS_PSSC);
- break;
- case USB_PORT_FEAT_C_OVER_CURRENT:
- ret = admhc_port_write(ahcd, wIndex, ADMHC_PS_OCIC);
- break;
- case USB_PORT_FEAT_C_RESET:
- ret = admhc_port_write(ahcd, wIndex, ADMHC_PS_PRSC);
- break;
- default:
- goto error;
- }
- break;
- case GetHubDescriptor:
- ret = admhc_get_hub_descriptor(ahcd, buf);
- break;
- case GetHubStatus:
- ret = admhc_get_hub_status(ahcd, buf);
- break;
- case GetPortStatus:
- if (!wIndex || wIndex > ports)
- goto error;
- wIndex--;
-
- ret = admhc_get_port_status(ahcd, wIndex, buf);
- break;
- case SetHubFeature:
- switch (wValue) {
- case C_HUB_OVER_CURRENT:
- /* FIXME: this can be cleared, yes? */
- case C_HUB_LOCAL_POWER:
- break;
- default:
- goto error;
- }
- break;
- case SetPortFeature:
- if (!wIndex || wIndex > ports)
- goto error;
- wIndex--;
-
- switch (wValue) {
- case USB_PORT_FEAT_ENABLE:
- ret = admhc_port_enable(ahcd, wIndex);
- break;
- case USB_PORT_FEAT_RESET:
- ret = admhc_port_reset(ahcd, wIndex);
- break;
- case USB_PORT_FEAT_SUSPEND:
-#ifdef CONFIG_USB_OTG
- if (hcd->self.otg_port == (wIndex + 1)
- && hcd->self.b_hnp_enable)
- start_hnp(ahcd);
- else
-#endif
- ret = admhc_port_write(ahcd, wIndex, ADMHC_PS_SPS);
- break;
- case USB_PORT_FEAT_POWER:
- ret = admhc_port_write(ahcd, wIndex, ADMHC_PS_SPP);
- break;
- default:
- goto error;
- }
- break;
-
- default:
-error:
- /* "protocol stall" on error */
- ret = -EPIPE;
- }
-
- return ret;
-}
-
diff --git a/target/linux/adm5120/files/drivers/usb/host/adm5120-mem.c b/target/linux/adm5120/files/drivers/usb/host/adm5120-mem.c
deleted file mode 100644
index 3e4b2d9924..0000000000
--- a/target/linux/adm5120/files/drivers/usb/host/adm5120-mem.c
+++ /dev/null
@@ -1,202 +0,0 @@
-/*
- * ADM5120 HCD (Host Controller Driver) for USB
- *
- * Copyright (C) 2007,2008 Gabor Juhos <juhosg at openwrt.org>
- *
- * This file was derived from: drivers/usb/host/ohci-mem.c
- * (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
- * (C) Copyright 2000-2002 David Brownell <dbrownell@users.sourceforge.net>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- *
- */
-
-/*-------------------------------------------------------------------------*/
-
-/*
- * OHCI deals with three types of memory:
- * - data used only by the HCD ... kmalloc is fine
- * - async and periodic schedules, shared by HC and HCD ... these
- * need to use dma_pool or dma_alloc_coherent
- * - driver buffers, read/written by HC ... the hcd glue or the
- * device driver provides us with dma addresses
- *
- * There's also "register" data, which is memory mapped.
- * No memory seen by this driver (or any HCD) may be paged out.
- */
-
-/*-------------------------------------------------------------------------*/
-
-static void admhc_hcd_init(struct admhcd *ahcd)
-{
- ahcd->next_statechange = jiffies;
- spin_lock_init(&ahcd->lock);
- INIT_LIST_HEAD(&ahcd->pending);
-}
-
-/*-------------------------------------------------------------------------*/
-
-static int admhc_mem_init(struct admhcd *ahcd)
-{
- ahcd->td_cache = dma_pool_create("admhc_td",
- admhcd_to_hcd(ahcd)->self.controller,
- sizeof(struct td),
- TD_ALIGN, /* byte alignment */
- 0 /* no page-crossing issues */
- );
- if (!ahcd->td_cache)
- goto err;
-
- ahcd->ed_cache = dma_pool_create("admhc_ed",
- admhcd_to_hcd(ahcd)->self.controller,
- sizeof(struct ed),
- ED_ALIGN, /* byte alignment */
- 0 /* no page-crossing issues */
- );
- if (!ahcd->ed_cache)
- goto err_td_cache;
-
- return 0;
-
-err_td_cache:
- dma_pool_destroy(ahcd->td_cache);
- ahcd->td_cache = NULL;
-err:
- return -ENOMEM;
-}
-
-static void admhc_mem_cleanup(struct admhcd *ahcd)
-{
- if (ahcd->td_cache) {
- dma_pool_destroy(ahcd->td_cache);
- ahcd->td_cache = NULL;
- }
-
- if (ahcd->ed_cache) {
- dma_pool_destroy(ahcd->ed_cache);
- ahcd->ed_cache = NULL;
- }
-}
-
-/*-------------------------------------------------------------------------*/
-
-/* ahcd "done list" processing needs this mapping */
-static inline struct td *dma_to_td(struct admhcd *ahcd, dma_addr_t td_dma)
-{
- struct td *td;
-
- td_dma &= TD_MASK;
- td = ahcd->td_hash[TD_HASH_FUNC(td_dma)];
- while (td && td->td_dma != td_dma)
- td = td->td_hash;
-
- return td;
-}
-
-/* TDs ... */
-static struct td *td_alloc(struct admhcd *ahcd, gfp_t mem_flags)
-{
- dma_addr_t dma;
- struct td *td;
-
- td = dma_pool_alloc(ahcd->td_cache, mem_flags, &dma);
- if (!td)
- return NULL;
-
- /* in case ahcd fetches it, make it look dead */
- memset(td, 0, sizeof *td);
- td->hwNextTD = cpu_to_hc32(ahcd, dma);
- td->td_dma = dma;
- /* hashed in td_fill */
-
- return td;
-}
-
-static void td_free(struct admhcd *ahcd, struct td *td)
-{
- struct td **prev = &ahcd->td_hash[TD_HASH_FUNC(td->td_dma)];
-
- while (*prev && *prev != td)
- prev = &(*prev)->td_hash;
- if (*prev)
- *prev = td->td_hash;
-#if 0
- /* TODO: remove */
- else if ((td->hwINFO & cpu_to_hc32(ahcd, TD_DONE)) != 0)
- admhc_dbg (ahcd, "no hash for td %p\n", td);
-#else
- else if ((td->flags & TD_FLAG_DONE) != 0)
- admhc_dbg (ahcd, "no hash for td %p\n", td);
-#endif
- dma_pool_free(ahcd->td_cache, td, td->td_dma);
-}
-
-/*-------------------------------------------------------------------------*/
-
-/* EDs ... */
-static struct ed *ed_alloc(struct admhcd *ahcd, gfp_t mem_flags)
-{
- dma_addr_t dma;
- struct ed *ed;
-
- ed = dma_pool_alloc(ahcd->ed_cache, mem_flags, &dma);
- if (!ed)
- return NULL;
-
- memset(ed, 0, sizeof(*ed));
- ed->dma = dma;
-
- INIT_LIST_HEAD(&ed->td_list);
- INIT_LIST_HEAD(&ed->urb_list);
-
- return ed;
-}
-
-static void ed_free(struct admhcd *ahcd, struct ed *ed)
-{
- dma_pool_free(ahcd->ed_cache, ed, ed->dma);
-}
-
-/*-------------------------------------------------------------------------*/
-
-/* URB priv ... */
-static void urb_priv_free(struct admhcd *ahcd, struct urb_priv *urb_priv)
-{
- int i;
-
- for (i = 0; i < urb_priv->td_cnt; i++)
- if (urb_priv->td[i])
- td_free(ahcd, urb_priv->td[i]);
-
- list_del(&urb_priv->pending);
- kfree(urb_priv);
-}
-
-static struct urb_priv *urb_priv_alloc(struct admhcd *ahcd, int num_tds,
- gfp_t mem_flags)
-{
- struct urb_priv *priv;
-
- /* allocate the private part of the URB */
- priv = kzalloc(sizeof(*priv) + sizeof(struct td) * num_tds, mem_flags);
- if (!priv)
- goto err;
-
- /* allocate the TDs (deferring hash chain updates) */
- for (priv->td_cnt = 0; priv->td_cnt < num_tds; priv->td_cnt++) {
- priv->td[priv->td_cnt] = td_alloc(ahcd, mem_flags);
- if (priv->td[priv->td_cnt] == NULL)
- goto err_free;
- }
-
- INIT_LIST_HEAD(&priv->pending);
-
- return priv;
-
-err_free:
- urb_priv_free(ahcd, priv);
-err:
- return NULL;
-}
diff --git a/target/linux/adm5120/files/drivers/usb/host/adm5120-pm.c b/target/linux/adm5120/files/drivers/usb/host/adm5120-pm.c
deleted file mode 100644
index c88e44829f..0000000000
--- a/target/linux/adm5120/files/drivers/usb/host/adm5120-pm.c
+++ /dev/null
@@ -1,445 +0,0 @@
-/*
- * ADM5120 HCD (Host Controller Driver) for USB
- *
- * Copyright (C) 2007,2008 Gabor Juhos <juhosg at openwrt.org>
- *
- * This file was derived from fragments of the OHCI driver.
- * (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
- * (C) Copyright 2000-2004 David Brownell <dbrownell@users.sourceforge.net>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- *
- */
-
-#define OHCI_SCHED_ENABLES \
- (OHCI_CTRL_CLE|OHCI_CTRL_BLE|OHCI_CTRL_PLE|OHCI_CTRL_IE)
-
-#ifdef CONFIG_PM
-static int admhc_restart(struct admhcd *ahcd);
-
-static int admhc_rh_suspend(struct admhcd *ahcd, int autostop)
-__releases(ahcd->lock)
-__acquires(ahcd->lock)
-{
- int status = 0;
-
- ahcd->hc_control = admhc_readl(ahcd, &ahcd->regs->control);
- switch (ahcd->hc_control & OHCI_CTRL_HCFS) {
- case OHCI_USB_RESUME:
- admhc_dbg(ahcd, "resume/suspend?\n");
- ahcd->hc_control &= ~OHCI_CTRL_HCFS;
- ahcd->hc_control |= OHCI_USB_RESET;
- admhc_writel(ahcd, ahcd->hc_control, &ahcd->ahcd->regs->control);
- (void) admhc_readl(ahcd, &ahcd->regs->control);
- /* FALL THROUGH */
- case OHCI_USB_RESET:
- status = -EBUSY;
- admhc_dbg(ahcd, "needs reinit!\n");
- goto done;
- case OHCI_USB_SUSPEND:
- if (!ahcd->autostop) {
- admhc_dbg(ahcd, "already suspended\n");
- goto done;
- }
- }
- admhc_dbg(ahcd, "%s root hub\n",
- autostop ? "auto-stop" : "suspend");
-
- /* First stop any processing */
- if (!autostop && (ahcd->hc_control & OHCI_SCHED_ENABLES)) {
- ahcd->hc_control &= ~OHCI_SCHED_ENABLES;
- admhc_writel(ahcd, ahcd->hc_control, &ahcd->ahcd->regs->control);
- ahcd->hc_control = admhc_readl(ahcd, &ahcd->regs->control);
- admhc_writel(ahcd, OHCI_INTR_SF, &ahcd->regs->intrstatus);
-
- /* sched disables take effect on the next frame,
- * then the last WDH could take 6+ msec
- */
- admhc_dbg(ahcd, "stopping schedules ...\n");
- ahcd->autostop = 0;
- spin_unlock_irq (&ahcd->lock);
- msleep (8);
- spin_lock_irq(&ahcd->lock);
- }
- dl_done_list (ahcd);
- finish_unlinks (ahcd, admhc_frame_no(ahcd));
-
- /* maybe resume can wake root hub */
- if (device_may_wakeup(&admhcd_to_hcd(ahcd)->self.root_hub->dev) ||
- autostop)
- ahcd->hc_control |= OHCI_CTRL_RWE;
- else {
- admhc_writel(ahcd, OHCI_INTR_RHSC, &ahcd->regs->intrdisable);
- ahcd->hc_control &= ~OHCI_CTRL_RWE;
- }
-
- /* Suspend hub ... this is the "global (to this bus) suspend" mode,
- * which doesn't imply ports will first be individually suspended.
- */
- ahcd->hc_control &= ~OHCI_CTRL_HCFS;
- ahcd->hc_control |= OHCI_USB_SUSPEND;
- admhc_writel(ahcd, ahcd->hc_control, &ahcd->ahcd->regs->control);
- (void) admhc_readl(ahcd, &ahcd->regs->control);
-
- /* no resumes until devices finish suspending */
- if (!autostop) {
- ahcd->next_statechange = jiffies + msecs_to_jiffies (5);
- ahcd->autostop = 0;
- }
-
-done:
- return status;
-}
-
-static inline struct ed *find_head(struct ed *ed)
-{
- /* for bulk and control lists */
- while (ed->ed_prev)
- ed = ed->ed_prev;
- return ed;
-}
-
-/* caller has locked the root hub */
-static int admhc_rh_resume(struct admhcd *ahcd)
-__releases(ahcd->lock)
-__acquires(ahcd->lock)
-{
- struct usb_hcd *hcd = admhcd_to_hcd (ahcd);
- u32 temp, enables;
- int status = -EINPROGRESS;
- int autostopped = ahcd->autostop;
-
- ahcd->autostop = 0;
- ahcd->hc_control = admhc_readl(ahcd, &ahcd->regs->control);
-
- if (ahcd->hc_control & (OHCI_CTRL_IR | OHCI_SCHED_ENABLES)) {
- /* this can happen after resuming a swsusp snapshot */
- if (hcd->state == HC_STATE_RESUMING) {
- admhc_dbg(ahcd, "BIOS/SMM active, control %03x\n",
- ahcd->hc_control);
- status = -EBUSY;
- /* this happens when pmcore resumes HC then root */
- } else {
- admhc_dbg(ahcd, "duplicate resume\n");
- status = 0;
- }
- } else switch (ahcd->hc_control & OHCI_CTRL_HCFS) {
- case OHCI_USB_SUSPEND:
- ahcd->hc_control &= ~(OHCI_CTRL_HCFS|OHCI_SCHED_ENABLES);
- ahcd->hc_control |= OHCI_USB_RESUME;
- admhc_writel(ahcd, ahcd->hc_control, &ahcd->ahcd->regs->control);
- (void) admhc_readl(ahcd, &ahcd->regs->control);
- admhc_dbg(ahcd, "%s root hub\n",
- autostopped ? "auto-start" : "resume");
- break;
- case OHCI_USB_RESUME:
- /* HCFS changes sometime after INTR_RD */
- admhc_dbg(ahcd, "%swakeup root hub\n",
- autostopped ? "auto-" : "");
- break;
- case OHCI_USB_OPER:
- /* this can happen after resuming a swsusp snapshot */
- admhc_dbg(ahcd, "snapshot resume? reinit\n");
- status = -EBUSY;
- break;
- default: /* RESET, we lost power */
- admhc_dbg(ahcd, "lost power\n");
- status = -EBUSY;
- }
- if (status == -EBUSY) {
- if (!autostopped) {
- spin_unlock_irq (&ahcd->lock);
- (void) ahcd_init (ahcd);
- status = admhc_restart (ahcd);
- spin_lock_irq(&ahcd->lock);
- }
- return status;
- }
- if (status != -EINPROGRESS)
- return status;
- if (autostopped)
- goto skip_resume;
- spin_unlock_irq (&ahcd->lock);
-
- /* Some controllers (lucent erratum) need extra-long delays */
- msleep (20 /* usb 11.5.1.10 */ + 12 /* 32 msec counter */ + 1);
-
- temp = admhc_readl(ahcd, &ahcd->regs->control);
- temp &= OHCI_CTRL_HCFS;
- if (temp != OHCI_USB_RESUME) {
- admhc_err (ahcd, "controller won't resume\n");
- spin_lock_irq(&ahcd->lock);
- return -EBUSY;
- }
-
- /* disable old schedule state, reinit from scratch */
- admhc_writel(ahcd, 0, &ahcd->regs->ed_controlhead);
- admhc_writel(ahcd, 0, &ahcd->regs->ed_controlcurrent);
- admhc_writel(ahcd, 0, &ahcd->regs->ed_bulkhead);
- admhc_writel(ahcd, 0, &ahcd->regs->ed_bulkcurrent);
- admhc_writel(ahcd, 0, &ahcd->regs->ed_periodcurrent);
- admhc_writel(ahcd, (u32) ahcd->hcca_dma, &ahcd->ahcd->regs->hcca);
-
- /* Sometimes PCI D3 suspend trashes frame timings ... */
- periodic_reinit(ahcd);
-
- /* the following code is executed with ahcd->lock held and
- * irqs disabled if and only if autostopped is true
- */
-
-skip_resume:
- /* interrupts might have been disabled */
- admhc_writel(ahcd, OHCI_INTR_INIT, &ahcd->regs->int_enable);
- if (ahcd->ed_rm_list)
- admhc_writel(ahcd, OHCI_INTR_SF, &ahcd->regs->int_enable);
-
- /* Then re-enable operations */
- admhc_writel(ahcd, OHCI_USB_OPER, &ahcd->regs->control);
- (void) admhc_readl(ahcd, &ahcd->regs->control);
- if (!autostopped)
- msleep (3);
-
- temp = ahcd->hc_control;
- temp &= OHCI_CTRL_RWC;
- temp |= OHCI_CONTROL_INIT | OHCI_USB_OPER;
- ahcd->hc_control = temp;
- admhc_writel(ahcd, temp, &ahcd->regs->control);
- (void) admhc_readl(ahcd, &ahcd->regs->control);
-
- /* TRSMRCY */
- if (!autostopped) {
- msleep (10);
- spin_lock_irq(&ahcd->lock);
- }
- /* now ahcd->lock is always held and irqs are always disabled */
-
- /* keep it alive for more than ~5x suspend + resume costs */
- ahcd->next_statechange = jiffies + STATECHANGE_DELAY;
-
- /* maybe turn schedules back on */
- enables = 0;
- temp = 0;
- if (!ahcd->ed_rm_list) {
- if (ahcd->ed_controltail) {
- admhc_writel(ahcd,
- find_head (ahcd->ed_controltail)->dma,
- &ahcd->regs->ed_controlhead);
- enables |= OHCI_CTRL_CLE;
- temp |= OHCI_CLF;
- }
- if (ahcd->ed_bulktail) {
- admhc_writel(ahcd, find_head (ahcd->ed_bulktail)->dma,
- &ahcd->regs->ed_bulkhead);
- enables |= OHCI_CTRL_BLE;
- temp |= OHCI_BLF;
- }
- }
- if (hcd->self.bandwidth_isoc_reqs || hcd->self.bandwidth_int_reqs)
- enables |= OHCI_CTRL_PLE|OHCI_CTRL_IE;
- if (enables) {
- admhc_dbg(ahcd, "restarting schedules ... %08x\n", enables);
- ahcd->hc_control |= enables;
- admhc_writel(ahcd, ahcd->hc_control, &ahcd->ahcd->regs->control);
- if (temp)
- admhc_writel(ahcd, temp, &ahcd->regs->cmdstatus);
- (void) admhc_readl(ahcd, &ahcd->regs->control);
- }
-
- return 0;
-}
-
-static int admhc_bus_suspend(struct usb_hcd *hcd)
-{
- struct admhcd *ahcd = hcd_to_admhcd(hcd);
- int rc;
-
- spin_lock_irq(&ahcd->lock);
-
- if (unlikely(!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags)))
- rc = -ESHUTDOWN;
- else
- rc = admhc_rh_suspend(ahcd, 0);
- spin_unlock_irq(&ahcd->lock);
- return rc;
-}
-
-static int admhc_bus_resume(struct usb_hcd *hcd)
-{
- struct admhcd *ahcd = hcd_to_admhcd(hcd);
- int rc;
-
- if (time_before(jiffies, ahcd->next_statechange))
- msleep(5);
-
- spin_lock_irq(&ahcd->lock);
-
- if (unlikely(!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags)))
- rc = -ESHUTDOWN;
- else
- rc = admhc_rh_resume(ahcd);
- spin_unlock_irq(&ahcd->lock);
-
- /* poll until we know a device is connected or we autostop */
- if (rc == 0)
- usb_hcd_poll_rh_status(hcd);
- return rc;
-}
-
-/* Carry out polling-, autostop-, and autoresume-related state changes */
-static int admhc_root_hub_state_changes(struct admhcd *ahcd, int changed,
- int any_connected)
-{
- int poll_rh = 1;
-
- switch (ahcd->hc_control & OHCI_CTRL_HCFS) {
-
- case OHCI_USB_OPER:
- /* keep on polling until we know a device is connected
- * and RHSC is enabled */
- if (!ahcd->autostop) {
- if (any_connected ||
- !device_may_wakeup(&admhcd_to_hcd(ahcd)
- ->self.root_hub->dev)) {
- if (admhc_readl(ahcd, &ahcd->regs->int_enable) &
- OHCI_INTR_RHSC)
- poll_rh = 0;
- } else {
- ahcd->autostop = 1;
- ahcd->next_statechange = jiffies + HZ;
- }
-
- /* if no devices have been attached for one second, autostop */
- } else {
- if (changed || any_connected) {
- ahcd->autostop = 0;
- ahcd->next_statechange = jiffies +
- STATECHANGE_DELAY;
- } else if (time_after_eq(jiffies,
- ahcd->next_statechange)
- && !ahcd->ed_rm_list
- && !(ahcd->hc_control &
- OHCI_SCHED_ENABLES)) {
- ahcd_rh_suspend(ahcd, 1);
- }
- }
- break;
-
- /* if there is a port change, autostart or ask to be resumed */
- case OHCI_USB_SUSPEND:
- case OHCI_USB_RESUME:
- if (changed) {
- if (ahcd->autostop)
- admhc_rh_resume(ahcd);
- else
- usb_hcd_resume_root_hub(admhcd_to_hcd(ahcd));
- } else {
- /* everything is idle, no need for polling */
- poll_rh = 0;
- }
- break;
- }
- return poll_rh;
-}
-
-/*-------------------------------------------------------------------------*/
-
-/* must not be called from interrupt context */
-static int admhc_restart(struct admhcd *ahcd)
-{
- int temp;
- int i;
- struct urb_priv *priv;
-
- /* mark any devices gone, so they do nothing till khubd disconnects.
- * recycle any "live" eds/tds (and urbs) right away.
- * later, khubd disconnect processing will recycle the other state,
- * (either as disconnect/reconnect, or maybe someday as a reset).
- */
- spin_lock_irq(&ahcd->lock);
- admhc_disable(ahcd);
- usb_root_hub_lost_power(admhcd_to_hcd(ahcd)->self.root_hub);
- if (!list_empty(&ahcd->pending))
- admhc_dbg(ahcd, "abort schedule...\n");
- list_for_each_entry(priv, &ahcd->pending, pending) {
- struct urb *urb = priv->td[0]->urb;
- struct ed *ed = priv->ed;
-
- switch (ed->state) {
- case ED_OPER:
- ed->state = ED_UNLINK;
- ed->hwINFO |= cpu_to_hc32(ahcd, ED_DEQUEUE);
- ed_deschedule (ahcd, ed);
-
- ed->ed_next = ahcd->ed_rm_list;
- ed->ed_prev = NULL;
- ahcd->ed_rm_list = ed;
- /* FALLTHROUGH */
- case ED_UNLINK:
- break;
- default:
- admhc_dbg(ahcd, "bogus ed %p state %d\n",
- ed, ed->state);
- }
-
- if (!urb->unlinked)
- urb->unlinked = -ESHUTDOWN;
- }
- finish_unlinks(ahcd, 0);
- spin_unlock_irq(&ahcd->lock);
-
- /* paranoia, in case that didn't work: */
-
- /* empty the interrupt branches */
- for (i = 0; i < NUM_INTS; i++) ahcd->load[i] = 0;
- for (i = 0; i < NUM_INTS; i++) ahcd->hcca->int_table[i] = 0;
-
- /* no EDs to remove */
- ahcd->ed_rm_list = NULL;
-
- /* empty control and bulk lists */
- ahcd->ed_controltail = NULL;
- ahcd->ed_bulktail = NULL;
-
- if ((temp = admhc_run(ahcd)) < 0) {
- admhc_err(ahcd, "can't restart, %d\n", temp);
- return temp;
- } else {
- /* here we "know" root ports should always stay powered,
- * and that if we try to turn them back on the root hub
- * will respond to CSC processing.
- */
- i = ahcd->num_ports;
- while (i--)
- admhc_writel(ahcd, RH_PS_PSS,
- &ahcd->regs->portstatus[i]);
- admhc_dbg(ahcd, "restart complete\n");
- }
- return 0;
-}
-
-#else /* CONFIG_PM */
-
-static inline int admhc_rh_resume(struct admhcd *ahcd)
-{
- return 0;
-}
-
-/* Carry out polling-related state changes.
- * autostop isn't used when CONFIG_PM is turned off.
- */
-static int admhc_root_hub_state_changes(struct admhcd *ahcd, int changed,
- int any_connected)
-{
- int poll_rh = 1;
-
- /* keep on polling until RHSC is enabled */
- if (admhc_readl(ahcd, &ahcd->regs->int_enable) & ADMHC_INTR_INSM)
- poll_rh = 0;
-
- return poll_rh;
-}
-
-#endif /* CONFIG_PM */
-
diff --git a/target/linux/adm5120/files/drivers/usb/host/adm5120-q.c b/target/linux/adm5120/files/drivers/usb/host/adm5120-q.c
deleted file mode 100644
index 632140b75e..0000000000
--- a/target/linux/adm5120/files/drivers/usb/host/adm5120-q.c
+++ /dev/null
@@ -1,955 +0,0 @@
-/*
- * ADM5120 HCD (Host Controller Driver) for USB
- *
- * Copyright (C) 2007,2008 Gabor Juhos <juhosg at openwrt.org>
- *
- * This file was derived from: drivers/usb/host/ohci-q.c
- * (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
- * (C) Copyright 2000-2002 David Brownell <dbrownell@users.sourceforge.net>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- *
- */
-
-#include <linux/irq.h>
-
-/*-------------------------------------------------------------------------*/
-
-/*
- * URB goes back to driver, and isn't reissued.
- * It's completely gone from HC data structures.
- * PRECONDITION: ahcd lock held, irqs blocked.
- */
-static void
-finish_urb(struct admhcd *ahcd, struct urb *urb, int status)
-__releases(ahcd->lock)
-__acquires(ahcd->lock)
-{
- urb_priv_free(ahcd, urb->hcpriv);
-
- if (likely(status == -EINPROGRESS))
- status = 0;
-
- switch (usb_pipetype(urb->pipe)) {
- case PIPE_ISOCHRONOUS:
- admhcd_to_hcd(ahcd)->self.bandwidth_isoc_reqs--;
- break;
- case PIPE_INTERRUPT:
- admhcd_to_hcd(ahcd)->self.bandwidth_int_reqs--;
- break;
- }
-
-#ifdef ADMHC_VERBOSE_DEBUG
- urb_print(ahcd, urb, "RET", usb_pipeout (urb->pipe), status);
-#endif
-
- /* urb->complete() can reenter this HCD */
- usb_hcd_unlink_urb_from_ep(admhcd_to_hcd(ahcd), urb);
- spin_unlock(&ahcd->lock);
- usb_hcd_giveback_urb(admhcd_to_hcd(ahcd), urb, status);
- spin_lock(&ahcd->lock);
-}
-
-
-/*-------------------------------------------------------------------------*
- * ED handling functions
- *-------------------------------------------------------------------------*/
-
-#if 0 /* FIXME */
-/* search for the right schedule branch to use for a periodic ed.
- * does some load balancing; returns the branch, or negative errno.
- */
-static int balance(struct admhcd *ahcd, int interval, int load)
-{
- int i, branch = -ENOSPC;
-
- /* iso periods can be huge; iso tds specify frame numbers */
- if (interval > NUM_INTS)
- interval = NUM_INTS;
-
- /* search for the least loaded schedule branch of that period
- * that has enough bandwidth left unreserved.
- */
- for (i = 0; i < interval ; i++) {
- if (branch < 0 || ahcd->load [branch] > ahcd->load [i]) {
- int j;
-
- /* usb 1.1 says 90% of one frame */
- for (j = i; j < NUM_INTS; j += interval) {
- if ((ahcd->load [j] + load) > 900)
- break;
- }
- if (j < NUM_INTS)
- continue;
- branch = i;
- }
- }
- return branch;
-}
-#endif
-
-/*-------------------------------------------------------------------------*/
-
-#if 0 /* FIXME */
-/* both iso and interrupt requests have periods; this routine puts them
- * into the schedule tree in the apppropriate place. most iso devices use
- * 1msec periods, but that's not required.
- */
-static void periodic_link (struct admhcd *ahcd, struct ed *ed)
-{
- unsigned i;
-
- admhc_vdbg (ahcd, "link %sed %p branch %d [%dus.], interval %d\n",
- (ed->hwINFO & cpu_to_hc32(ahcd, ED_ISO)) ? "iso " : "",
- ed, ed->branch, ed->load, ed->interval);
-
- for (i = ed->branch; i < NUM_INTS; i += ed->interval) {
- struct ed **prev = &ahcd->periodic [i];
- __hc32 *prev_p = &ahcd->hcca->int_table [i];
- struct ed *here = *prev;
-
- /* sorting each branch by period (slow before fast)
- * lets us share the faster parts of the tree.
- * (plus maybe: put interrupt eds before iso)
- */
- while (here && ed != here) {
- if (ed->interval > here->interval)
- break;
- prev = &here->ed_next;
- prev_p = &here->hwNextED;
- here = *prev;
- }
- if (ed != here) {
- ed->ed_next = here;
- if (here)
- ed->hwNextED = *prev_p;
- wmb ();
- *prev = ed;
- *prev_p = cpu_to_hc32(ahcd, ed->dma);
- wmb();
- }
- ahcd->load [i] += ed->load;
- }
- admhcd_to_hcd(ahcd)->self.bandwidth_allocated += ed->load / ed->interval;
-}
-#endif
-
-/* link an ed into the HC chain */
-
-static int ed_schedule(struct admhcd *ahcd, struct ed *ed)
-{
- struct ed *old_tail;
-
- if (admhcd_to_hcd(ahcd)->state == HC_STATE_QUIESCING)
- return -EAGAIN;
-
- ed->state = ED_OPER;
-
- old_tail = ahcd->ed_tails[ed->type];
-
- ed->ed_next = old_tail->ed_next;
- if (ed->ed_next) {
- ed->ed_next->ed_prev = ed;
- ed->hwNextED = cpu_to_hc32(ahcd, ed->ed_next->dma);
- }
- ed->ed_prev = old_tail;
-
- old_tail->ed_next = ed;
- old_tail->hwNextED = cpu_to_hc32(ahcd, ed->dma);
-
- ahcd->ed_tails[ed->type] = ed;
-
- admhc_dma_enable(ahcd);
-
- return 0;
-}
-
-/*-------------------------------------------------------------------------*/
-
-#if 0 /* FIXME */
-/* scan the periodic table to find and unlink this ED */
-static void periodic_unlink (struct admhcd *ahcd, struct ed *ed)
-{
- int i;
-
- for (i = ed->branch; i < NUM_INTS; i += ed->interval) {
- struct ed *temp;
- struct ed **prev = &ahcd->periodic [i];
- __hc32 *prev_p = &ahcd->hcca->int_table [i];
-
- while (*prev && (temp = *prev) != ed) {
- prev_p = &temp->hwNextED;
- prev = &temp->ed_next;
- }
- if (*prev) {
- *prev_p = ed->hwNextED;
- *prev = ed->ed_next;
- }
- ahcd->load [i] -= ed->load;
- }
-
- admhcd_to_hcd(ahcd)->self.bandwidth_allocated -= ed->load / ed->interval;
- admhc_vdbg (ahcd, "unlink %sed %p branch %d [%dus.], interval %d\n",
- (ed->hwINFO & cpu_to_hc32(ahcd, ED_ISO)) ? "iso " : "",
- ed, ed->branch, ed->load, ed->interval);
-}
-#endif
-
-/* unlink an ed from the HC chain.
- * just the link to the ed is unlinked.
- * the link from the ed still points to another operational ed or 0
- * so the HC can eventually finish the processing of the unlinked ed
- * (assuming it already started that, which needn't be true).
- *
- * ED_UNLINK is a transient state: the HC may still see this ED, but soon
- * it won't. ED_SKIP means the HC will finish its current transaction,
- * but won't start anything new. The TD queue may still grow; device
- * drivers don't know about this HCD-internal state.
- *
- * When the HC can't see the ED, something changes ED_UNLINK to one of:
- *
- * - ED_OPER: when there's any request queued, the ED gets rescheduled
- * immediately. HC should be working on them.
- *
- * - ED_IDLE: when there's no TD queue. there's no reason for the HC
- * to care about this ED; safe to disable the endpoint.
- *
- * When finish_unlinks() runs later, after SOF interrupt, it will often
- * complete one or more URB unlinks before making that state change.
- */
-static void ed_deschedule(struct admhcd *ahcd, struct ed *ed)
-{
-
-#ifdef ADMHC_VERBOSE_DEBUG
- admhc_dump_ed(ahcd, "ED-DESCHED", ed, 1);
-#endif
-
- ed->hwINFO |= cpu_to_hc32(ahcd, ED_SKIP);
- wmb();
- ed->state = ED_UNLINK;
-
- /* remove this ED from the HC list */
- ed->ed_prev->hwNextED = ed->hwNextED;
-
- /* and remove it from our list also */
- ed->ed_prev->ed_next = ed->ed_next;
-
- if (ed->ed_next)
- ed->ed_next->ed_prev = ed->ed_prev;
-
- if (ahcd->ed_tails[ed->type] == ed)
- ahcd->ed_tails[ed->type] = ed->ed_prev;
-}
-
-/*-------------------------------------------------------------------------*/
-
-static struct ed *ed_create(struct admhcd *ahcd, unsigned int type, u32 info)
-{
- struct ed *ed;
- struct td *td;
-
- ed = ed_alloc(ahcd, GFP_ATOMIC);
- if (!ed)
- goto err;
-
- /* dummy td; end of td list for this ed */
- td = td_alloc(ahcd, GFP_ATOMIC);
- if (!td)
- goto err_free_ed;
-
- switch (type) {
- case PIPE_INTERRUPT:
- info |= ED_INT;
- break;
- case PIPE_ISOCHRONOUS:
- info |= ED_ISO;
- break;
- }
-
- ed->dummy = td;
- ed->state = ED_IDLE;
- ed->type = type;
-
- ed->hwINFO = cpu_to_hc32(ahcd, info);
- ed->hwTailP = cpu_to_hc32(ahcd, td->td_dma);
- ed->hwHeadP = ed->hwTailP; /* ED_C, ED_H zeroed */
-
- return ed;
-
-err_free_ed:
- ed_free(ahcd, ed);
-err:
- return NULL;
-}
-
-/* get and maybe (re)init an endpoint. init _should_ be done only as part
- * of enumeration, usb_set_configuration() or usb_set_interface().
- */
-static struct ed *ed_get(struct admhcd *ahcd, struct usb_host_endpoint *ep,
- struct usb_device *udev, unsigned int pipe, int interval)
-{
- struct ed *ed;
- unsigned long flags;
-
- spin_lock_irqsave(&ahcd->lock, flags);
-
- ed = ep->hcpriv;
- if (!ed) {
- u32 info;
-
- /* FIXME: usbcore changes dev->devnum before SET_ADDRESS
- * suceeds ... otherwise we wouldn't need "pipe".
- */
- info = usb_pipedevice(pipe);
- info |= (ep->desc.bEndpointAddress & ~USB_DIR_IN) << ED_EN_SHIFT;
- info |= le16_to_cpu(ep->desc.wMaxPacketSize) << ED_MPS_SHIFT;
- if (udev->speed == USB_SPEED_FULL)
- info |= ED_SPEED_FULL;
-
- ed = ed_create(ahcd, usb_pipetype(pipe), info);
- if (ed)
- ep->hcpriv = ed;
- }
-
- spin_unlock_irqrestore(&ahcd->lock, flags);
-
- return ed;
-}
-
-/*-------------------------------------------------------------------------*/
-
-/* request unlinking of an endpoint from an operational HC.
- * put the ep on the rm_list
- * real work is done at the next start frame (SOFI) hardware interrupt
- * caller guarantees HCD is running, so hardware access is safe,
- * and that ed->state is ED_OPER
- */
-static void start_ed_unlink(struct admhcd *ahcd, struct ed *ed)
-{
-
-#ifdef ADMHC_VERBOSE_DEBUG
- admhc_dump_ed(ahcd, "ED-UNLINK", ed, 1);
-#endif
-
- ed->hwINFO |= cpu_to_hc32(ahcd, ED_DEQUEUE);
- ed_deschedule(ahcd, ed);
-
- /* add this ED into the remove list */
- ed->ed_rm_next = ahcd->ed_rm_list;
- ahcd->ed_rm_list = ed;
-
- /* enable SOF interrupt */
- admhc_intr_ack(ahcd, ADMHC_INTR_SOFI);
- admhc_intr_enable(ahcd, ADMHC_INTR_SOFI);
- /* flush those writes */
- admhc_writel_flush(ahcd);
-
- /* SOF interrupt might get delayed; record the frame counter value that
- * indicates when the HC isn't looking at it, so concurrent unlinks
- * behave. frame_no wraps every 2^16 msec, and changes right before
- * SOF is triggered.
- */
- ed->tick = admhc_frame_no(ahcd) + 1;
-}
-
-/*-------------------------------------------------------------------------*
- * TD handling functions
- *-------------------------------------------------------------------------*/
-
-/* enqueue next TD for this URB (OHCI spec 5.2.8.2) */
-
-static void
-td_fill(struct admhcd *ahcd, u32 info, dma_addr_t data, int len,
- struct urb *urb, int index)
-{
- struct td *td, *td_pt;
- struct urb_priv *urb_priv = urb->hcpriv;
- int hash;
- u32 cbl = 0;
-
-#if 1
- if (index == (urb_priv->td_cnt - 1) &&
- ((urb->transfer_flags & URB_NO_INTERRUPT) == 0))
- cbl |= TD_IE;
-#else
- if (index == (urb_priv->td_cnt - 1))
- cbl |= TD_IE;
-#endif
-
- /* use this td as the next dummy */
- td_pt = urb_priv->td[index];
-
- /* fill the old dummy TD */
- td = urb_priv->td[index] = urb_priv->ed->dummy;
- urb_priv->ed->dummy = td_pt;
-
- td->ed = urb_priv->ed;
- td->next_dl_td = NULL;
- td->index = index;
- td->urb = urb;
- td->data_dma = data;
- if (!len)
- data = 0;
-
- if (data)
- cbl |= (len & TD_BL_MASK);
-
- info |= TD_OWN;
-
- /* setup hardware specific fields */
- td->hwINFO = cpu_to_hc32(ahcd, info);
- td->hwDBP = cpu_to_hc32(ahcd, data);
- td->hwCBL = cpu_to_hc32(ahcd, cbl);
- td->hwNextTD = cpu_to_hc32(ahcd, td_pt->td_dma);
-
- /* append to queue */
- list_add_tail(&td->td_list, &td->ed->td_list);
-
- /* hash it for later reverse mapping */
- hash = TD_HASH_FUNC(td->td_dma);
- td->td_hash = ahcd->td_hash[hash];
- ahcd->td_hash[hash] = td;
-
- /* HC might read the TD (or cachelines) right away ... */
- wmb();
- td->ed->hwTailP = td->hwNextTD;
-}
-
-/*-------------------------------------------------------------------------*/
-
-/* Prepare all TDs of a transfer, and queue them onto the ED.
- * Caller guarantees HC is active.
- * Usually the ED is already on the schedule, so TDs might be
- * processed as soon as they're queued.
- */
-static void td_submit_urb(struct admhcd *ahcd, struct urb *urb)
-{
- struct urb_priv *urb_priv = urb->hcpriv;
- dma_addr_t data;
- int data_len = urb->transfer_buffer_length;
- int cnt = 0;
- u32 info = 0;
- int is_out = usb_pipeout(urb->pipe);
- u32 toggle = 0;
-
- /* OHCI handles the bulk/interrupt data toggles itself. We just
- * use the device toggle bits for resetting, and rely on the fact
- * that resetting toggle is meaningless if the endpoint is active.
- */
-
- if (usb_gettoggle(urb->dev, usb_pipeendpoint(urb->pipe), is_out)) {
- toggle = TD_T_CARRY;
- } else {
- toggle = TD_T_DATA0;
- usb_settoggle(urb->dev, usb_pipeendpoint (urb->pipe),
- is_out, 1);
- }
-
- urb_priv->td_idx = 0;
- list_add(&urb_priv->pending, &ahcd->pending);
-
- if (data_len)
- data = urb->transfer_dma;
- else
- data = 0;
-
- /* NOTE: TD_CC is set so we can tell which TDs the HC processed by
- * using TD_CC_GET, as well as by seeing them on the done list.
- * (CC = NotAccessed ... 0x0F, or 0x0E in PSWs for ISO.)
- */
- switch (urb_priv->ed->type) {
- case PIPE_INTERRUPT:
- info = is_out
- ? TD_T_CARRY | TD_SCC_NOTACCESSED | TD_DP_OUT
- : TD_T_CARRY | TD_SCC_NOTACCESSED | TD_DP_IN;
-
- /* setup service interval and starting frame number */
- info |= (urb->start_frame & TD_FN_MASK);
- info |= (urb->interval & TD_ISI_MASK) << TD_ISI_SHIFT;
-
- td_fill(ahcd, info, data, data_len, urb, cnt);
- cnt++;
-
- admhcd_to_hcd(ahcd)->self.bandwidth_int_reqs++;
- break;
-
- case PIPE_BULK:
- info = is_out
- ? TD_SCC_NOTACCESSED | TD_DP_OUT
- : TD_SCC_NOTACCESSED | TD_DP_IN;
-
- /* TDs _could_ transfer up to 8K each */
- while (data_len > TD_DATALEN_MAX) {
- td_fill(ahcd, info | ((cnt) ? TD_T_CARRY : toggle),
- data, TD_DATALEN_MAX, urb, cnt);
- data += TD_DATALEN_MAX;
- data_len -= TD_DATALEN_MAX;
- cnt++;
- }
-
- td_fill(ahcd, info | ((cnt) ? TD_T_CARRY : toggle), data,
- data_len, urb, cnt);
- cnt++;
-
- if ((urb->transfer_flags & URB_ZERO_PACKET)
- && (cnt < urb_priv->td_cnt)) {
- td_fill(ahcd, info | ((cnt) ? TD_T_CARRY : toggle),
- 0, 0, urb, cnt);
- cnt++;
- }
- break;
-
- /* control manages DATA0/DATA1 toggle per-request; SETUP resets it,
- * any DATA phase works normally, and the STATUS ack is special.
- */
- case PIPE_CONTROL:
- /* fill a TD for the setup */
- info = TD_SCC_NOTACCESSED | TD_DP_SETUP | TD_T_DATA0;
- td_fill(ahcd, info, urb->setup_dma, 8, urb, cnt++);
-
- if (data_len > 0) {
- /* fill a TD for the data */
- info = TD_SCC_NOTACCESSED | TD_T_DATA1;
- info |= is_out ? TD_DP_OUT : TD_DP_IN;
- /* NOTE: mishandles transfers >8K, some >4K */
- td_fill(ahcd, info, data, data_len, urb, cnt++);
- }
-
- /* fill a TD for the ACK */
- info = (is_out || data_len == 0)
- ? TD_SCC_NOTACCESSED | TD_DP_IN | TD_T_DATA1
- : TD_SCC_NOTACCESSED | TD_DP_OUT | TD_T_DATA1;
- td_fill(ahcd, info, data, 0, urb, cnt++);
-
- break;
-
- /* ISO has no retransmit, so no toggle;
- * Each TD could handle multiple consecutive frames (interval 1);
- * we could often reduce the number of TDs here.
- */
- case PIPE_ISOCHRONOUS:
- info = is_out
- ? TD_T_CARRY | TD_SCC_NOTACCESSED | TD_DP_OUT
- : TD_T_CARRY | TD_SCC_NOTACCESSED | TD_DP_IN;
-
- for (cnt = 0; cnt < urb->number_of_packets; cnt++) {
- int frame = urb->start_frame;
-
- frame += cnt * urb->interval;
- frame &= TD_FN_MASK;
- td_fill(ahcd, info | frame,
- data + urb->iso_frame_desc[cnt].offset,
- urb->iso_frame_desc[cnt].length, urb, cnt);
- }
- admhcd_to_hcd(ahcd)->self.bandwidth_isoc_reqs++;
- break;
- }
-
- if (urb_priv->td_cnt != cnt)
- admhc_err(ahcd, "bad number of tds created for urb %p\n", urb);
-}
-
-/*-------------------------------------------------------------------------*
- * Done List handling functions
- *-------------------------------------------------------------------------*/
-
-/* calculate transfer length/status and update the urb */
-static int td_done(struct admhcd *ahcd, struct urb *urb, struct td *td)
-{
- struct urb_priv *urb_priv = urb->hcpriv;
- u32 info;
- u32 bl;
- u32 tdDBP;
- int type = usb_pipetype(urb->pipe);
- int cc;
- int status = -EINPROGRESS;
-
- info = hc32_to_cpup(ahcd, &td->hwINFO);
- tdDBP = hc32_to_cpup(ahcd, &td->hwDBP);
- bl = TD_BL_GET(hc32_to_cpup(ahcd, &td->hwCBL));
- cc = TD_CC_GET(info);
-
- /* ISO ... drivers see per-TD length/status */
- if (type == PIPE_ISOCHRONOUS) {
- /* TODO */
- int dlen = 0;
-
- /* NOTE: assumes FC in tdINFO == 0, and that
- * only the first of 0..MAXPSW psws is used.
- */
- if (info & TD_CC) /* hc didn't touch? */
- return status;
-
- if (usb_pipeout(urb->pipe))
- dlen = urb->iso_frame_desc[td->index].length;
- else {
- /* short reads are always OK for ISO */
- if (cc == TD_CC_DATAUNDERRUN)
- cc = TD_CC_NOERROR;
- dlen = tdDBP - td->data_dma + bl;
- }
-
- urb->actual_length += dlen;
- urb->iso_frame_desc[td->index].actual_length = dlen;
- urb->iso_frame_desc[td->index].status = cc_to_error[cc];
-
- if (cc != TD_CC_NOERROR)
- admhc_vdbg (ahcd,
- "urb %p iso td %p (%d) len %d cc %d\n",
- urb, td, 1 + td->index, dlen, cc);
-
- /* BULK, INT, CONTROL ... drivers see aggregate length/status,
- * except that "setup" bytes aren't counted and "short" transfers
- * might not be reported as errors.
- */
- } else {
- /* update packet status if needed (short is normally ok) */
- if (cc == TD_CC_DATAUNDERRUN
- && !(urb->transfer_flags & URB_SHORT_NOT_OK))
- cc = TD_CC_NOERROR;
-
- if (cc != TD_CC_NOERROR && cc < TD_CC_HCD0)
- status = cc_to_error[cc];
-
-
- /* count all non-empty packets except control SETUP packet */
- if ((type != PIPE_CONTROL || td->index != 0) && tdDBP != 0) {
- urb->actual_length += tdDBP - td->data_dma + bl;
- }
-
- if (cc != TD_CC_NOERROR && cc < TD_CC_HCD0)
- admhc_vdbg(ahcd,
- "urb %p td %p (%d) cc %d, len=%d/%d\n",
- urb, td, td->index, cc,
- urb->actual_length,
- urb->transfer_buffer_length);
- }
-
- list_del(&td->td_list);
- urb_priv->td_idx++;
-
- return status;
-}
-
-/*-------------------------------------------------------------------------*/
-
-static inline void
-ed_halted(struct admhcd *ahcd, struct td *td, int cc, struct td *rev)
-{
- struct urb *urb = td->urb;
- struct urb_priv *urb_priv = urb->hcpriv;
- struct ed *ed = td->ed;
- struct list_head *tmp = td->td_list.next;
- __hc32 toggle = ed->hwHeadP & cpu_to_hc32(ahcd, ED_C);
-
- admhc_dump_ed(ahcd, "ed halted", td->ed, 1);
- /* clear ed halt; this is the td that caused it, but keep it inactive
- * until its urb->complete() has a chance to clean up.
- */
- ed->hwINFO |= cpu_to_hc32(ahcd, ED_SKIP);
- wmb();
- ed->hwHeadP &= ~cpu_to_hc32(ahcd, ED_H);
-
- /* Get rid of all later tds from this urb. We don't have
- * to be careful: no errors and nothing was transferred.
- * Also patch the ed so it looks as if those tds completed normally.
- */
- while (tmp != &ed->td_list) {
- struct td *next;
-
- next = list_entry(tmp, struct td, td_list);
- tmp = next->td_list.next;
-
- if (next->urb != urb)
- break;
-
- /* NOTE: if multi-td control DATA segments get supported,
- * this urb had one of them, this td wasn't the last td
- * in that segment (TD_R clear), this ed halted because
- * of a short read, _and_ URB_SHORT_NOT_OK is clear ...
- * then we need to leave the control STATUS packet queued
- * and clear ED_SKIP.
- */
- list_del(&next->td_list);
- urb_priv->td_cnt++;
- ed->hwHeadP = next->hwNextTD | toggle;
- }
-
- /* help for troubleshooting: report anything that
- * looks odd ... that doesn't include protocol stalls
- * (or maybe some other things)
- */
- switch (cc) {
- case TD_CC_DATAUNDERRUN:
- if ((urb->transfer_flags & URB_SHORT_NOT_OK) == 0)
- break;
- /* fallthrough */
- case TD_CC_STALL:
- if (usb_pipecontrol(urb->pipe))
- break;
- /* fallthrough */
- default:
- admhc_dbg (ahcd,
- "urb %p path %s ep%d%s %08x cc %d --> status %d\n",
- urb, urb->dev->devpath,
- usb_pipeendpoint (urb->pipe),
- usb_pipein (urb->pipe) ? "in" : "out",
- hc32_to_cpu(ahcd, td->hwINFO),
- cc, cc_to_error [cc]);
- }
-}
-
-/*-------------------------------------------------------------------------*/
-
-/* there are some urbs/eds to unlink; called in_irq(), with HCD locked */
-static void
-finish_unlinks(struct admhcd *ahcd, u16 tick)
-{
- struct ed *ed, **last;
-
-rescan_all:
- for (last = &ahcd->ed_rm_list, ed = *last; ed != NULL; ed = *last) {
- struct list_head *entry, *tmp;
- int completed, modified;
- __hc32 *prev;
-
- /* only take off EDs that the HC isn't using, accounting for
- * frame counter wraps and EDs with partially retired TDs
- */
- if (likely(HC_IS_RUNNING(admhcd_to_hcd(ahcd)->state))) {
- if (tick_before (tick, ed->tick)) {
-skip_ed:
- last = &ed->ed_rm_next;
- continue;
- }
-#if 0
- if (!list_empty(&ed->td_list)) {
- struct td *td;
- u32 head;
-
- td = list_entry(ed->td_list.next, struct td,
- td_list);
- head = hc32_to_cpu(ahcd, ed->hwHeadP) &
- TD_MASK;
-
- /* INTR_WDH may need to clean up first */
- if (td->td_dma != head)
- goto skip_ed;
- }
-#endif
- }
-
- /* reentrancy: if we drop the schedule lock, someone might
- * have modified this list. normally it's just prepending
- * entries (which we'd ignore), but paranoia won't hurt.
- */
- *last = ed->ed_rm_next;
- ed->ed_rm_next = NULL;
- modified = 0;
-
- /* unlink urbs as requested, but rescan the list after
- * we call a completion since it might have unlinked
- * another (earlier) urb
- *
- * When we get here, the HC doesn't see this ed. But it
- * must not be rescheduled until all completed URBs have
- * been given back to the driver.
- */
-rescan_this:
- completed = 0;
- prev = &ed->hwHeadP;
- list_for_each_safe(entry, tmp, &ed->td_list) {
- struct td *td;
- struct urb *urb;
- struct urb_priv *urb_priv;
- __hc32 savebits;
- int status;
-
- td = list_entry(entry, struct td, td_list);
- urb = td->urb;
- urb_priv = td->urb->hcpriv;
-
- if (!urb->unlinked) {
- prev = &td->hwNextTD;
- continue;
- }
-
- if ((urb_priv) == NULL)
- continue;
-
- /* patch pointer hc uses */
- savebits = *prev & ~cpu_to_hc32(ahcd, TD_MASK);
- *prev = td->hwNextTD | savebits;
-
- /* HC may have partly processed this TD */
-#ifdef ADMHC_VERBOSE_DEBUG
- urb_print(ahcd, urb, "PARTIAL", 0);
-#endif
- status = td_done(ahcd, urb, td);
-
- /* if URB is done, clean up */
- if (urb_priv->td_idx == urb_priv->td_cnt) {
- modified = completed = 1;
- finish_urb(ahcd, urb, status);
- }
- }
- if (completed && !list_empty(&ed->td_list))
- goto rescan_this;
-
- /* ED's now officially unlinked, hc doesn't see */
- ed->state = ED_IDLE;
- ed->hwHeadP &= ~cpu_to_hc32(ahcd, ED_H);
- ed->hwNextED = 0;
- wmb();
- ed->hwINFO &= ~cpu_to_hc32(ahcd, ED_SKIP | ED_DEQUEUE);
-
- /* but if there's work queued, reschedule */
- if (!list_empty(&ed->td_list)) {
- if (HC_IS_RUNNING(admhcd_to_hcd(ahcd)->state))
- ed_schedule(ahcd, ed);
- }
-
- if (modified)
- goto rescan_all;
- }
-}
-
-/*-------------------------------------------------------------------------*/
-
-/*
- * Process normal completions (error or success) and clean the schedules.
- *
- * This is the main path for handing urbs back to drivers. The only other
- * path is finish_unlinks(), which unlinks URBs using ed_rm_list, instead of
- * scanning the (re-reversed) donelist as this does.
- */
-
-static void ed_unhalt(struct admhcd *ahcd, struct ed *ed, struct urb *urb)
-{
- struct list_head *entry,*tmp;
- __hc32 toggle = ed->hwHeadP & cpu_to_hc32(ahcd, ED_C);
-
-#ifdef ADMHC_VERBOSE_DEBUG
- admhc_dump_ed(ahcd, "UNHALT", ed, 0);
-#endif
- /* clear ed halt; this is the td that caused it, but keep it inactive
- * until its urb->complete() has a chance to clean up.
- */
- ed->hwINFO |= cpu_to_hc32(ahcd, ED_SKIP);
- wmb();
- ed->hwHeadP &= ~cpu_to_hc32(ahcd, ED_H);
-
- list_for_each_safe(entry, tmp, &ed->td_list) {
- struct td *td = list_entry(entry, struct td, td_list);
- __hc32 info;
-
- if (td->urb != urb)
- break;
-
- info = td->hwINFO;
- info &= ~cpu_to_hc32(ahcd, TD_CC | TD_OWN);
- td->hwINFO = info;
-
- ed->hwHeadP = td->hwNextTD | toggle;
- wmb();
- }
-
-}
-
-static void ed_intr_refill(struct admhcd *ahcd, struct ed *ed)
-{
- __hc32 toggle = ed->hwHeadP & cpu_to_hc32(ahcd, ED_C);
-
- ed->hwHeadP = ed->hwTailP | toggle;
-}
-
-
-static inline int is_ed_halted(struct admhcd *ahcd, struct ed *ed)
-{
- return ((hc32_to_cpup(ahcd, &ed->hwHeadP) & ED_H) == ED_H);
-}
-
-static inline int is_td_halted(struct admhcd *ahcd, struct ed *ed,
- struct td *td)
-{
- return ((hc32_to_cpup(ahcd, &ed->hwHeadP) & TD_MASK) ==
- (hc32_to_cpup(ahcd, &td->hwNextTD) & TD_MASK));
-}
-
-static void ed_update(struct admhcd *ahcd, struct ed *ed)
-{
- struct list_head *entry,*tmp;
-
-#ifdef ADMHC_VERBOSE_DEBUG
- admhc_dump_ed(ahcd, "UPDATE", ed, 1);
-#endif
-
- list_for_each_safe(entry, tmp, &ed->td_list) {
- struct td *td = list_entry(entry, struct td, td_list);
- struct urb *urb = td->urb;
- struct urb_priv *urb_priv = urb->hcpriv;
- int status;
-
- if (hc32_to_cpup(ahcd, &td->hwINFO) & TD_OWN)
- break;
-
- /* update URB's length and status from TD */
- status = td_done(ahcd, urb, td);
- if (is_ed_halted(ahcd, ed) && is_td_halted(ahcd, ed, td))
- ed_unhalt(ahcd, ed, urb);
-
- if (ed->type == PIPE_INTERRUPT)
- ed_intr_refill(ahcd,ed);
-
- /* If all this urb's TDs are done, call complete() */
- if (urb_priv->td_idx == urb_priv->td_cnt)
- finish_urb(ahcd, urb, status);
-
- /* clean schedule: unlink EDs that are no longer busy */
- if (list_empty(&ed->td_list)) {
- if (ed->state == ED_OPER)
- start_ed_unlink(ahcd, ed);
-
- /* ... reenabling halted EDs only after fault cleanup */
- } else if ((ed->hwINFO & cpu_to_hc32(ahcd,
- ED_SKIP | ED_DEQUEUE))
- == cpu_to_hc32(ahcd, ED_SKIP)) {
- td = list_entry(ed->td_list.next, struct td, td_list);
-#if 0
- if (!(td->hwINFO & cpu_to_hc32(ahcd, TD_DONE))) {
- ed->hwINFO &= ~cpu_to_hc32(ahcd, ED_SKIP);
- /* ... hc may need waking-up */
- switch (ed->type) {
- case PIPE_CONTROL:
- admhc_writel (ahcd, OHCI_CLF,
- &ahcd->regs->cmdstatus);
- break;
- case PIPE_BULK:
- admhc_writel (ahcd, OHCI_BLF,
- &ahcd->regs->cmdstatus);
- break;
- }
- }
-#else
- if ((td->hwINFO & cpu_to_hc32(ahcd, TD_OWN)))
- ed->hwINFO &= ~cpu_to_hc32(ahcd, ED_SKIP);
-#endif
- }
-
- }
-}
-
-/* there are some tds completed; called in_irq(), with HCD locked */
-static void admhc_td_complete(struct admhcd *ahcd)
-{
- struct ed *ed;
-
- for (ed = ahcd->ed_head; ed; ed = ed->ed_next) {
- if (ed->state != ED_OPER)
- continue;
-
- ed_update(ahcd, ed);
- }
-}
diff --git a/target/linux/adm5120/files/drivers/usb/host/adm5120.h b/target/linux/adm5120/files/drivers/usb/host/adm5120.h
deleted file mode 100644
index fbb9b3a124..0000000000
--- a/target/linux/adm5120/files/drivers/usb/host/adm5120.h
+++ /dev/null
@@ -1,762 +0,0 @@
-/*
- * ADM5120 HCD (Host Controller Driver) for USB
- *
- * Copyright (C) 2007,2008 Gabor Juhos <juhosg at openwrt.org>
- *
- * This file was derived from: drivers/usb/host/ohci.h
- * (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
- * (C) Copyright 2000-2002 David Brownell <dbrownell@users.sourceforge.net>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- *
- */
-
-/*
- * __hc32 and __hc16 are "Host Controller" types, they may be equivalent to
- * __leXX (normally) or __beXX (given OHCI_BIG_ENDIAN), depending on the
- * host controller implementation.
- */
-typedef __u32 __bitwise __hc32;
-typedef __u16 __bitwise __hc16;
-
-/*
- * OHCI Endpoint Descriptor (ED) ... holds TD queue
- * See OHCI spec, section 4.2
- *
- * This is a "Queue Head" for those transfers, which is why
- * both EHCI and UHCI call similar structures a "QH".
- */
-
-#define TD_DATALEN_MAX 4096
-
-#define ED_ALIGN 16
-#define ED_MASK ((u32)~(ED_ALIGN-1)) /* strip hw status in low addr bits */
-
-struct ed {
- /* first fields are hardware-specified */
- __hc32 hwINFO; /* endpoint config bitmap */
- /* info bits defined by hcd */
-#define ED_DEQUEUE (1 << 27)
- /* info bits defined by the hardware */
-#define ED_MPS_SHIFT 16
-#define ED_MPS_MASK ((1 << 11)-1)
-#define ED_MPS_GET(x) (((x) >> ED_MPS_SHIFT) & ED_MPS_MASK)
-#define ED_ISO (1 << 15) /* isochronous endpoint */
-#define ED_SKIP (1 << 14)
-#define ED_SPEED_FULL (1 << 13) /* fullspeed device */
-#define ED_INT (1 << 11) /* interrupt endpoint */
-#define ED_EN_SHIFT 7 /* endpoint shift */
-#define ED_EN_MASK ((1 << 4)-1) /* endpoint mask */
-#define ED_EN_GET(x) (((x) >> ED_EN_SHIFT) & ED_EN_MASK)
-#define ED_FA_MASK ((1 << 7)-1) /* function address mask */
-#define ED_FA_GET(x) ((x) & ED_FA_MASK)
- __hc32 hwTailP; /* tail of TD list */
- __hc32 hwHeadP; /* head of TD list (hc r/w) */
-#define ED_C (0x02) /* toggle carry */
-#define ED_H (0x01) /* halted */
- __hc32 hwNextED; /* next ED in list */
-
- /* rest are purely for the driver's use */
- dma_addr_t dma; /* addr of ED */
- struct td *dummy; /* next TD to activate */
-
- struct list_head urb_list; /* list of our URBs */
-
- /* host's view of schedule */
- struct ed *ed_next; /* on schedule list */
- struct ed *ed_prev; /* for non-interrupt EDs */
- struct ed *ed_rm_next; /* on rm list */
- struct list_head td_list; /* "shadow list" of our TDs */
-
- /* create --> IDLE --> OPER --> ... --> IDLE --> destroy
- * usually: OPER --> UNLINK --> (IDLE | OPER) --> ...
- */
- u8 state; /* ED_{IDLE,UNLINK,OPER} */
-#define ED_IDLE 0x00 /* NOT linked to HC */
-#define ED_UNLINK 0x01 /* being unlinked from hc */
-#define ED_OPER 0x02 /* IS linked to hc */
-
- u8 type; /* PIPE_{BULK,...} */
-
- /* periodic scheduling params (for intr and iso) */
- u8 branch;
- u16 interval;
- u16 load;
- u16 last_iso; /* iso only */
-
- /* HC may see EDs on rm_list until next frame (frame_no == tick) */
- u16 tick;
-} __attribute__ ((aligned(ED_ALIGN)));
-
-/*
- * OHCI Transfer Descriptor (TD) ... one per transfer segment
- * See OHCI spec, sections 4.3.1 (general = control/bulk/interrupt)
- * and 4.3.2 (iso)
- */
-
-#define TD_ALIGN 32
-#define TD_MASK ((u32)~(TD_ALIGN-1)) /* strip hw status in low addr bits */
-
-struct td {
- /* first fields are hardware-specified */
- __hc32 hwINFO; /* transfer info bitmask */
-
- /* hwINFO bits */
-#define TD_OWN (1 << 31) /* owner of the descriptor */
-#define TD_CC_SHIFT 27 /* condition code */
-#define TD_CC_MASK 0xf
-#define TD_CC (TD_CC_MASK << TD_CC_SHIFT)
-#define TD_CC_GET(x) (((x) >> TD_CC_SHIFT) & TD_CC_MASK)
-
-#define TD_EC_SHIFT 25 /* error count */
-#define TD_EC_MASK 0x3
-#define TD_EC (TD_EC_MASK << TD_EC_SHIFT)
-#define TD_EC_GET(x) ((x >> TD_EC_SHIFT) & TD_EC_MASK)
-#define TD_T_SHIFT 23 /* data toggle state */
-#define TD_T_MASK 0x3
-#define TD_T (TD_T_MASK << TD_T_SHIFT)
-#define TD_T_DATA0 (0x2 << TD_T_SHIFT) /* DATA0 */
-#define TD_T_DATA1 (0x3 << TD_T_SHIFT) /* DATA1 */
-#define TD_T_CARRY (0x0 << TD_T_SHIFT) /* uses ED_C */
-#define TD_T_GET(x) (((x) >> TD_T_SHIFT) & TD_T_MASK)
-#define TD_DP_SHIFT 21 /* direction/pid */
-#define TD_DP_MASK 0x3
-#define TD_DP (TD_DP_MASK << TD_DP_SHIFT)
-#define TD_DP_GET (((x) >> TD_DP_SHIFT) & TD_DP_MASK)
-#define TD_DP_SETUP (0x0 << TD_DP_SHIFT) /* SETUP pid */
-#define TD_DP_OUT (0x1 << TD_DP_SHIFT) /* OUT pid */
-#define TD_DP_IN (0x2 << TD_DP_SHIFT) /* IN pid */
-#define TD_ISI_SHIFT 8 /* Interrupt Service Interval */
-#define TD_ISI_MASK 0x3f
-#define TD_ISI_GET(x) (((x) >> TD_ISI_SHIFT) & TD_ISI_MASK)
-#define TD_FN_MASK 0x3f /* frame number */
-#define TD_FN_GET(x) ((x) & TD_FN_MASK)
-
- __hc32 hwDBP; /* Data Buffer Pointer (or 0) */
- __hc32 hwCBL; /* Controller/Buffer Length */
-
- /* hwCBL bits */
-#define TD_BL_MASK 0xffff /* buffer length */
-#define TD_BL_GET(x) ((x) & TD_BL_MASK)
-#define TD_IE (1 << 16) /* interrupt enable */
- __hc32 hwNextTD; /* Next TD Pointer */
-
- /* rest are purely for the driver's use */
- __u8 index;
- struct ed *ed;
- struct td *td_hash; /* dma-->td hashtable */
- struct td *next_dl_td;
- struct urb *urb;
-
- dma_addr_t td_dma; /* addr of this TD */
- dma_addr_t data_dma; /* addr of data it points to */
-
- struct list_head td_list; /* "shadow list", TDs on same ED */
-
- u32 flags;
-#define TD_FLAG_DONE (1 << 17) /* retired to done list */
-#define TD_FLAG_ISO (1 << 16) /* copy of ED_ISO */
-} __attribute__ ((aligned(TD_ALIGN))); /* c/b/i need 16; only iso needs 32 */
-
-/*
- * Hardware transfer status codes -- CC from td->hwINFO
- */
-#define TD_CC_NOERROR 0x00
-#define TD_CC_CRC 0x01
-#define TD_CC_BITSTUFFING 0x02
-#define TD_CC_DATATOGGLEM 0x03
-#define TD_CC_STALL 0x04
-#define TD_CC_DEVNOTRESP 0x05
-#define TD_CC_PIDCHECKFAIL 0x06
-#define TD_CC_UNEXPECTEDPID 0x07
-#define TD_CC_DATAOVERRUN 0x08
-#define TD_CC_DATAUNDERRUN 0x09
- /* 0x0A, 0x0B reserved for hardware */
-#define TD_CC_BUFFEROVERRUN 0x0C
-#define TD_CC_BUFFERUNDERRUN 0x0D
- /* 0x0E, 0x0F reserved for HCD */
-#define TD_CC_HCD0 0x0E
-#define TD_CC_NOTACCESSED 0x0F
-
-/*
- * preshifted status codes
- */
-#define TD_SCC_NOTACCESSED (TD_CC_NOTACCESSED << TD_CC_SHIFT)
-
-
-/* map OHCI TD status codes (CC) to errno values */
-static const int cc_to_error [16] = {
- /* No Error */ 0,
- /* CRC Error */ -EILSEQ,
- /* Bit Stuff */ -EPROTO,
- /* Data Togg */ -EILSEQ,
- /* Stall */ -EPIPE,
- /* DevNotResp */ -ETIME,
- /* PIDCheck */ -EPROTO,
- /* UnExpPID */ -EPROTO,
- /* DataOver */ -EOVERFLOW,
- /* DataUnder */ -EREMOTEIO,
- /* (for hw) */ -EIO,
- /* (for hw) */ -EIO,
- /* BufferOver */ -ECOMM,
- /* BuffUnder */ -ENOSR,
- /* (for HCD) */ -EALREADY,
- /* (for HCD) */ -EALREADY
-};
-
-#define NUM_INTS 32
-
-/*
- * This is the structure of the OHCI controller's memory mapped I/O region.
- * You must use readl() and writel() (in <asm/io.h>) to access these fields!!
- * Layout is in section 7 (and appendix B) of the spec.
- */
-struct admhcd_regs {
- __hc32 gencontrol; /* General Control */
- __hc32 int_status; /* Interrupt Status */
- __hc32 int_enable; /* Interrupt Enable */
- __hc32 reserved00;
- __hc32 host_control; /* Host General Control */
- __hc32 reserved01;
- __hc32 fminterval; /* Frame Interval */
- __hc32 fmnumber; /* Frame Number */
- __hc32 reserved02;
- __hc32 reserved03;
- __hc32 reserved04;
- __hc32 reserved05;
- __hc32 reserved06;
- __hc32 reserved07;
- __hc32 reserved08;
- __hc32 reserved09;
- __hc32 reserved10;
- __hc32 reserved11;
- __hc32 reserved12;
- __hc32 reserved13;
- __hc32 reserved14;
- __hc32 reserved15;
- __hc32 reserved16;
- __hc32 reserved17;
- __hc32 reserved18;
- __hc32 reserved19;
- __hc32 reserved20;
- __hc32 reserved21;
- __hc32 lsthresh; /* Low Speed Threshold */
- __hc32 rhdesc; /* Root Hub Descriptor */
-#define MAX_ROOT_PORTS 2
- __hc32 portstatus[MAX_ROOT_PORTS]; /* Port Status */
- __hc32 hosthead; /* Host Descriptor Head */
-} __attribute__ ((aligned(32)));
-
-/*
- * General Control register bits
- */
-#define ADMHC_CTRL_UHFE (1 << 0) /* USB Host Function Enable */
-#define ADMHC_CTRL_SIR (1 << 1) /* Software Interrupt request */
-#define ADMHC_CTRL_DMAA (1 << 2) /* DMA Arbitration Control */
-#define ADMHC_CTRL_SR (1 << 3) /* Software Reset */
-
-/*
- * Host General Control register bits
- */
-#define ADMHC_HC_BUSS 0x3 /* USB bus state */
-#define ADMHC_BUSS_RESET 0x0
-#define ADMHC_BUSS_RESUME 0x1
-#define ADMHC_BUSS_OPER 0x2
-#define ADMHC_BUSS_SUSPEND 0x3
-#define ADMHC_HC_DMAE (1 << 2) /* DMA enable */
-
-/*
- * Interrupt Status/Enable register bits
- */
-#define ADMHC_INTR_SOFI (1 << 4) /* start of frame */
-#define ADMHC_INTR_RESI (1 << 5) /* resume detected */
-#define ADMHC_INTR_6 (1 << 6) /* unknown */
-#define ADMHC_INTR_7 (1 << 7) /* unknown */
-#define ADMHC_INTR_BABI (1 << 8) /* babble detected */
-#define ADMHC_INTR_INSM (1 << 9) /* root hub status change */
-#define ADMHC_INTR_SO (1 << 10) /* scheduling overrun */
-#define ADMHC_INTR_FNO (1 << 11) /* frame number overflow */
-#define ADMHC_INTR_TDC (1 << 20) /* transfer descriptor completed */
-#define ADMHC_INTR_SWI (1 << 29) /* software interrupt */
-#define ADMHC_INTR_FATI (1 << 30) /* fatal error */
-#define ADMHC_INTR_INTA (1 << 31) /* interrupt active */
-
-#define ADMHC_INTR_MIE (1 << 31) /* master interrupt enable */
-
-/*
- * SOF Frame Interval register bits
- */
-#define ADMHC_SFI_FI_MASK ((1 << 14)-1) /* Frame Interval value */
-#define ADMHC_SFI_FSLDP_SHIFT 16
-#define ADMHC_SFI_FSLDP_MASK ((1 << 15)-1)
-#define ADMHC_SFI_FIT (1 << 31) /* Frame Interval Toggle */
-
-/*
- * SOF Frame Number register bits
- */
-#define ADMHC_SFN_FN_MASK ((1 << 16)-1) /* Frame Number Mask */
-#define ADMHC_SFN_FR_SHIFT 16 /* Frame Remaining Shift */
-#define ADMHC_SFN_FR_MASK ((1 << 14)-1) /* Frame Remaining Mask */
-#define ADMHC_SFN_FRT (1 << 31) /* Frame Remaining Toggle */
-
-/*
- * Root Hub Descriptor register bits
- */
-#define ADMHC_RH_NUMP 0xff /* number of ports */
-#define ADMHC_RH_PSM (1 << 8) /* power switching mode */
-#define ADMHC_RH_NPS (1 << 9) /* no power switching */
-#define ADMHC_RH_OCPM (1 << 10) /* over current protection mode */
-#define ADMHC_RH_NOCP (1 << 11) /* no over current protection */
-#define ADMHC_RH_PPCM (0xff << 16) /* port power control */
-
-#define ADMHC_RH_LPS (1 << 24) /* local power switch */
-#define ADMHC_RH_OCI (1 << 25) /* over current indicator */
-
-/* status change bits */
-#define ADMHC_RH_LPSC (1 << 26) /* local power switch change */
-#define ADMHC_RH_OCIC (1 << 27) /* over current indicator change */
-
-#define ADMHC_RH_DRWE (1 << 28) /* device remote wakeup enable */
-#define ADMHC_RH_CRWE (1 << 29) /* clear remote wakeup enable */
-
-#define ADMHC_RH_CGP (1 << 24) /* clear global power */
-#define ADMHC_RH_SGP (1 << 26) /* set global power */
-
-/*
- * Port Status register bits
- */
-#define ADMHC_PS_CCS (1 << 0) /* current connect status */
-#define ADMHC_PS_PES (1 << 1) /* port enable status */
-#define ADMHC_PS_PSS (1 << 2) /* port suspend status */
-#define ADMHC_PS_POCI (1 << 3) /* port over current indicator */
-#define ADMHC_PS_PRS (1 << 4) /* port reset status */
-#define ADMHC_PS_PPS (1 << 8) /* port power status */
-#define ADMHC_PS_LSDA (1 << 9) /* low speed device attached */
-
-/* status change bits */
-#define ADMHC_PS_CSC (1 << 16) /* connect status change */
-#define ADMHC_PS_PESC (1 << 17) /* port enable status change */
-#define ADMHC_PS_PSSC (1 << 18) /* port suspend status change */
-#define ADMHC_PS_OCIC (1 << 19) /* over current indicator change */
-#define ADMHC_PS_PRSC (1 << 20) /* port reset status change */
-
-/* port feature bits */
-#define ADMHC_PS_CPE (1 << 0) /* clear port enable */
-#define ADMHC_PS_SPE (1 << 1) /* set port enable */
-#define ADMHC_PS_SPS (1 << 2) /* set port suspend */
-#define ADMHC_PS_CPS (1 << 3) /* clear suspend status */
-#define ADMHC_PS_SPR (1 << 4) /* set port reset */
-#define ADMHC_PS_SPP (1 << 8) /* set port power */
-#define ADMHC_PS_CPP (1 << 9) /* clear port power */
-
-/*
- * the POTPGT value is not defined in the ADMHC, so define a dummy value
- */
-#define ADMHC_POTPGT 2 /* in ms */
-
-/* hcd-private per-urb state */
-struct urb_priv {
- struct ed *ed;
- struct list_head pending; /* URBs on the same ED */
-
- u32 td_cnt; /* # tds in this request */
- u32 td_idx; /* index of the current td */
- struct td *td[0]; /* all TDs in this request */
-};
-
-#define TD_HASH_SIZE 64 /* power'o'two */
-/* sizeof (struct td) ~= 64 == 2^6 ... */
-#define TD_HASH_FUNC(td_dma) ((td_dma ^ (td_dma >> 6)) % TD_HASH_SIZE)
-
-/*
- * This is the full ADMHCD controller description
- *
- * Note how the "proper" USB information is just
- * a subset of what the full implementation needs. (Linus)
- */
-
-struct admhcd {
- spinlock_t lock;
-
- /*
- * I/O memory used to communicate with the HC (dma-consistent)
- */
- struct admhcd_regs __iomem *regs;
-
- /*
- * hcd adds to schedule for a live hc any time, but removals finish
- * only at the start of the next frame.
- */
-
- struct ed *ed_head;
- struct ed *ed_tails[4];
-
- struct ed *ed_rm_list; /* to be removed */
-
- struct ed *periodic[NUM_INTS]; /* shadow int_table */
-
-#if 0 /* TODO: remove? */
- /*
- * OTG controllers and transceivers need software interaction;
- * other external transceivers should be software-transparent
- */
- struct otg_transceiver *transceiver;
-#endif
-
- /*
- * memory management for queue data structures
- */
- struct dma_pool *td_cache;
- struct dma_pool *ed_cache;
- struct td *td_hash[TD_HASH_SIZE];
- struct list_head pending;
-
- /*
- * driver state
- */
- int num_ports;
- int load[NUM_INTS];
- u32 host_control; /* copy of the host_control reg */
- unsigned long next_statechange; /* suspend/resume */
- u32 fminterval; /* saved register */
- unsigned autostop:1; /* rh auto stopping/stopped */
-
- unsigned long flags; /* for HC bugs */
-#define OHCI_QUIRK_AMD756 0x01 /* erratum #4 */
-#define OHCI_QUIRK_SUPERIO 0x02 /* natsemi */
-#define OHCI_QUIRK_INITRESET 0x04 /* SiS, OPTi, ... */
-#define OHCI_QUIRK_BE_DESC 0x08 /* BE descriptors */
-#define OHCI_QUIRK_BE_MMIO 0x10 /* BE registers */
-#define OHCI_QUIRK_ZFMICRO 0x20 /* Compaq ZFMicro chipset*/
- // there are also chip quirks/bugs in init logic
-
-#ifdef DEBUG
- struct dentry *debug_dir;
- struct dentry *debug_async;
- struct dentry *debug_periodic;
- struct dentry *debug_registers;
-#endif
-};
-
-/* convert between an hcd pointer and the corresponding ahcd_hcd */
-static inline struct admhcd *hcd_to_admhcd(struct usb_hcd *hcd)
-{
- return (struct admhcd *)(hcd->hcd_priv);
-}
-static inline struct usb_hcd *admhcd_to_hcd(const struct admhcd *ahcd)
-{
- return container_of((void *)ahcd, struct usb_hcd, hcd_priv);
-}
-
-/*-------------------------------------------------------------------------*/
-
-#ifndef DEBUG
-#define STUB_DEBUG_FILES
-#endif /* DEBUG */
-
-#ifdef DEBUG
-# define admhc_dbg(ahcd, fmt, args...) \
- printk(KERN_DEBUG "adm5120-hcd: " fmt , ## args )
-#else
-# define admhc_dbg(ahcd, fmt, args...) do { } while (0)
-#endif
-
-#define admhc_err(ahcd, fmt, args...) \
- printk(KERN_ERR "adm5120-hcd: " fmt , ## args )
-#define admhc_info(ahcd, fmt, args...) \
- printk(KERN_INFO "adm5120-hcd: " fmt , ## args )
-#define admhc_warn(ahcd, fmt, args...) \
- printk(KERN_WARNING "adm5120-hcd: " fmt , ## args )
-
-#ifdef ADMHC_VERBOSE_DEBUG
-# define admhc_vdbg admhc_dbg
-#else
-# define admhc_vdbg(ahcd, fmt, args...) do { } while (0)
-#endif
-
-/*-------------------------------------------------------------------------*/
-
-/*
- * While most USB host controllers implement their registers and
- * in-memory communication descriptors in little-endian format,
- * a minority (notably the IBM STB04XXX and the Motorola MPC5200
- * processors) implement them in big endian format.
- *
- * In addition some more exotic implementations like the Toshiba
- * Spider (aka SCC) cell southbridge are "mixed" endian, that is,
- * they have a different endianness for registers vs. in-memory
- * descriptors.
- *
- * This attempts to support either format at compile time without a
- * runtime penalty, or both formats with the additional overhead
- * of checking a flag bit.
- *
- * That leads to some tricky Kconfig rules howevber. There are
- * different defaults based on some arch/ppc platforms, though
- * the basic rules are:
- *
- * Controller type Kconfig options needed
- * --------------- ----------------------
- * little endian CONFIG_USB_ADMHC_LITTLE_ENDIAN
- *
- * fully big endian CONFIG_USB_ADMHC_BIG_ENDIAN_DESC _and_
- * CONFIG_USB_ADMHC_BIG_ENDIAN_MMIO
- *
- * mixed endian CONFIG_USB_ADMHC_LITTLE_ENDIAN _and_
- * CONFIG_USB_OHCI_BIG_ENDIAN_{MMIO,DESC}
- *
- * (If you have a mixed endian controller, you -must- also define
- * CONFIG_USB_ADMHC_LITTLE_ENDIAN or things will not work when building
- * both your mixed endian and a fully big endian controller support in
- * the same kernel image).
- */
-
-#ifdef CONFIG_USB_ADMHC_BIG_ENDIAN_DESC
-#ifdef CONFIG_USB_ADMHC_LITTLE_ENDIAN
-#define big_endian_desc(ahcd) (ahcd->flags & OHCI_QUIRK_BE_DESC)
-#else
-#define big_endian_desc(ahcd) 1 /* only big endian */
-#endif
-#else
-#define big_endian_desc(ahcd) 0 /* only little endian */
-#endif
-
-#ifdef CONFIG_USB_ADMHC_BIG_ENDIAN_MMIO
-#ifdef CONFIG_USB_ADMHC_LITTLE_ENDIAN
-#define big_endian_mmio(ahcd) (ahcd->flags & OHCI_QUIRK_BE_MMIO)
-#else
-#define big_endian_mmio(ahcd) 1 /* only big endian */
-#endif
-#else
-#define big_endian_mmio(ahcd) 0 /* only little endian */
-#endif
-
-/*
- * Big-endian read/write functions are arch-specific.
- * Other arches can be added if/when they're needed.
- *
- * REVISIT: arch/powerpc now has readl/writel_be, so the
- * definition below can die once the STB04xxx support is
- * finally ported over.
- */
-#if defined(CONFIG_PPC) && !defined(CONFIG_PPC_MERGE)
-#define readl_be(addr) in_be32((__force unsigned *)addr)
-#define writel_be(val, addr) out_be32((__force unsigned *)addr, val)
-#endif
-
-static inline unsigned int admhc_readl(const struct admhcd *ahcd,
- __hc32 __iomem *regs)
-{
-#ifdef CONFIG_USB_ADMHC_BIG_ENDIAN_MMIO
- return big_endian_mmio(ahcd) ?
- readl_be(regs) :
- readl(regs);
-#else
- return readl(regs);
-#endif
-}
-
-static inline void admhc_writel(const struct admhcd *ahcd,
- const unsigned int val, __hc32 __iomem *regs)
-{
-#ifdef CONFIG_USB_ADMHC_BIG_ENDIAN_MMIO
- big_endian_mmio(ahcd) ?
- writel_be(val, regs) :
- writel(val, regs);
-#else
- writel(val, regs);
-#endif
-}
-
-static inline void admhc_writel_flush(const struct admhcd *ahcd)
-{
-#if 0
- /* TODO: remove? */
- (void) admhc_readl(ahcd, &ahcd->regs->gencontrol);
-#endif
-}
-
-
-/*-------------------------------------------------------------------------*/
-
-/* cpu to ahcd */
-static inline __hc16 cpu_to_hc16(const struct admhcd *ahcd, const u16 x)
-{
- return big_endian_desc(ahcd) ?
- (__force __hc16)cpu_to_be16(x) :
- (__force __hc16)cpu_to_le16(x);
-}
-
-static inline __hc16 cpu_to_hc16p(const struct admhcd *ahcd, const u16 *x)
-{
- return big_endian_desc(ahcd) ?
- cpu_to_be16p(x) :
- cpu_to_le16p(x);
-}
-
-static inline __hc32 cpu_to_hc32(const struct admhcd *ahcd, const u32 x)
-{
- return big_endian_desc(ahcd) ?
- (__force __hc32)cpu_to_be32(x) :
- (__force __hc32)cpu_to_le32(x);
-}
-
-static inline __hc32 cpu_to_hc32p(const struct admhcd *ahcd, const u32 *x)
-{
- return big_endian_desc(ahcd) ?
- cpu_to_be32p(x) :
- cpu_to_le32p(x);
-}
-
-/* ahcd to cpu */
-static inline u16 hc16_to_cpu(const struct admhcd *ahcd, const __hc16 x)
-{
- return big_endian_desc(ahcd) ?
- be16_to_cpu((__force __be16)x) :
- le16_to_cpu((__force __le16)x);
-}
-
-static inline u16 hc16_to_cpup(const struct admhcd *ahcd, const __hc16 *x)
-{
- return big_endian_desc(ahcd) ?
- be16_to_cpup((__force __be16 *)x) :
- le16_to_cpup((__force __le16 *)x);
-}
-
-static inline u32 hc32_to_cpu(const struct admhcd *ahcd, const __hc32 x)
-{
- return big_endian_desc(ahcd) ?
- be32_to_cpu((__force __be32)x) :
- le32_to_cpu((__force __le32)x);
-}
-
-static inline u32 hc32_to_cpup(const struct admhcd *ahcd, const __hc32 *x)
-{
- return big_endian_desc(ahcd) ?
- be32_to_cpup((__force __be32 *)x) :
- le32_to_cpup((__force __le32 *)x);
-}
-
-/*-------------------------------------------------------------------------*/
-
-static inline u16 admhc_frame_no(const struct admhcd *ahcd)
-{
- u32 t;
-
- t = admhc_readl(ahcd, &ahcd->regs->fmnumber) & ADMHC_SFN_FN_MASK;
- return (u16)t;
-}
-
-static inline u16 admhc_frame_remain(const struct admhcd *ahcd)
-{
- u32 t;
-
- t = admhc_readl(ahcd, &ahcd->regs->fmnumber) >> ADMHC_SFN_FR_SHIFT;
- t &= ADMHC_SFN_FR_MASK;
- return (u16)t;
-}
-
-/*-------------------------------------------------------------------------*/
-
-static inline void admhc_disable(struct admhcd *ahcd)
-{
- admhcd_to_hcd(ahcd)->state = HC_STATE_HALT;
-}
-
-#define FI 0x2edf /* 12000 bits per frame (-1) */
-#define FSLDP(fi) (0x7fff & ((6 * ((fi) - 1200)) / 7))
-#define FIT ADMHC_SFI_FIT
-#define LSTHRESH 0x628 /* lowspeed bit threshold */
-
-static inline void periodic_reinit(struct admhcd *ahcd)
-{
-#if 0
- u32 fi = ahcd->fminterval & ADMHC_SFI_FI_MASK;
- u32 fit = admhc_readl(ahcd, &ahcd->regs->fminterval) & FIT;
-
- /* TODO: adjust FSLargestDataPacket value too? */
- admhc_writel(ahcd, (fit ^ FIT) | ahcd->fminterval,
- &ahcd->regs->fminterval);
-#else
- u32 fit = admhc_readl(ahcd, &ahcd->regs->fminterval) & FIT;
-
- /* TODO: adjust FSLargestDataPacket value too? */
- admhc_writel(ahcd, (fit ^ FIT) | ahcd->fminterval,
- &ahcd->regs->fminterval);
-#endif
-}
-
-static inline u32 admhc_read_rhdesc(struct admhcd *ahcd)
-{
- return admhc_readl(ahcd, &ahcd->regs->rhdesc);
-}
-
-static inline u32 admhc_read_portstatus(struct admhcd *ahcd, int port)
-{
- return admhc_readl(ahcd, &ahcd->regs->portstatus[port]);
-}
-
-static inline void admhc_write_portstatus(struct admhcd *ahcd, int port,
- u32 value)
-{
- admhc_writel(ahcd, value, &ahcd->regs->portstatus[port]);
-}
-
-static inline void roothub_write_status(struct admhcd *ahcd, u32 value)
-{
- /* FIXME: read-only bits must be masked out */
- admhc_writel(ahcd, value, &ahcd->regs->rhdesc);
-}
-
-static inline void admhc_intr_disable(struct admhcd *ahcd, u32 ints)
-{
- u32 t;
-
- t = admhc_readl(ahcd, &ahcd->regs->int_enable);
- t &= ~(ints);
- admhc_writel(ahcd, t, &ahcd->regs->int_enable);
- /* TODO: flush writes ?*/
-}
-
-static inline void admhc_intr_enable(struct admhcd *ahcd, u32 ints)
-{
- u32 t;
-
- t = admhc_readl(ahcd, &ahcd->regs->int_enable);
- t |= ints;
- admhc_writel(ahcd, t, &ahcd->regs->int_enable);
- /* TODO: flush writes ?*/
-}
-
-static inline void admhc_intr_ack(struct admhcd *ahcd, u32 ints)
-{
- admhc_writel(ahcd, ints, &ahcd->regs->int_status);
-}
-
-static inline void admhc_dma_enable(struct admhcd *ahcd)
-{
- u32 t;
-
- t = admhc_readl(ahcd, &ahcd->regs->host_control);
- if (t & ADMHC_HC_DMAE)
- return;
-
- t |= ADMHC_HC_DMAE;
- admhc_writel(ahcd, t, &ahcd->regs->host_control);
- admhc_vdbg(ahcd,"DMA enabled\n");
-}
-
-static inline void admhc_dma_disable(struct admhcd *ahcd)
-{
- u32 t;
-
- t = admhc_readl(ahcd, &ahcd->regs->host_control);
- if (!(t & ADMHC_HC_DMAE))
- return;
-
- t &= ~ADMHC_HC_DMAE;
- admhc_writel(ahcd, t, &ahcd->regs->host_control);
- admhc_vdbg(ahcd,"DMA disabled\n");
-}
diff --git a/target/linux/adm5120/files/drivers/watchdog/adm5120_wdt.c b/target/linux/adm5120/files/drivers/watchdog/adm5120_wdt.c
deleted file mode 100644
index cddb1721cf..0000000000
--- a/target/linux/adm5120/files/drivers/watchdog/adm5120_wdt.c
+++ /dev/null
@@ -1,206 +0,0 @@
-/*
- * ADM5120_WDT 0.01: Infineon ADM5120 SoC watchdog driver
- * Copyright (c) Ondrej Zajicek <santiago@crfreenet.org>, 2007
- *
- * based on
- *
- * RC32434_WDT 0.01: IDT Interprise 79RC32434 watchdog driver
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- *
- */
-
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/fs.h>
-#include <linux/miscdevice.h>
-#include <linux/watchdog.h>
-
-#include <asm/bootinfo.h>
-
-#include <adm5120_info.h>
-#include <adm5120_defs.h>
-#include <adm5120_irq.h>
-#include <adm5120_switch.h>
-
-
-#define DEFAULT_TIMEOUT 15 /* (secs) Default is 15 seconds */
-#define MAX_TIMEOUT 327
-/* Max is 327 seconds, counter is 15-bit integer, step is 10 ms */
-
-#define NAME "adm5120_wdt"
-#define VERSION "0.1"
-
-static int expect_close = 0;
-static int access = 0;
-static unsigned int timeout = DEFAULT_TIMEOUT;
-
-static int nowayout = WATCHDOG_NOWAYOUT;
-module_param(nowayout, int, 0);
-MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
-MODULE_LICENSE("GPL");
-
-
-static inline void wdt_set_timeout(void)
-{
- u32 val = (1 << 31) | (((timeout * 100) & 0x7FFF) << 16);
- SW_WRITE_REG(SWITCH_REG_WDOG0, val);
-}
-
-/*
- It looks like WDOG0-register-write don't modify counter,
- but WDOG0-register-read resets counter.
-*/
-
-static inline void wdt_reset_counter(void)
-{
- SW_READ_REG(SWITCH_REG_WDOG0);
-}
-
-static inline void wdt_disable(void)
-{
- SW_WRITE_REG(SWITCH_REG_WDOG0, 0x7FFF0000);
-}
-
-
-
-static int wdt_open(struct inode *inode, struct file *file)
-{
- /* Allow only one person to hold it open */
- if (access)
- return -EBUSY;
-
- if (nowayout) {
- __module_get(THIS_MODULE);
- }
-
- /* Activate timer */
- wdt_reset_counter();
- wdt_set_timeout();
- printk(KERN_INFO NAME ": enabling watchdog timer\n");
- access = 1;
- return 0;
-}
-
-static int wdt_release(struct inode *inode, struct file *file)
-{
- /*
- * Shut off the timer.
- * Lock it in if it's a module and we set nowayout
- */
- if (expect_close && (nowayout == 0)) {
- wdt_disable();
- printk(KERN_INFO NAME ": disabling watchdog timer\n");
- module_put(THIS_MODULE);
- } else {
- printk(KERN_CRIT NAME ": device closed unexpectedly. WDT will not stop!\n");
- }
- access = 0;
- return 0;
-}
-
-static ssize_t wdt_write(struct file *file, const char *data, size_t len, loff_t *ppos)
-{
- /* Refresh the timer. */
- if (len) {
- if (!nowayout) {
- size_t i;
-
- /* In case it was set long ago */
- expect_close = 0;
-
- for (i = 0; i != len; i++) {
- char c;
- if (get_user(c, data + i))
- return -EFAULT;
- if (c == 'V')
- expect_close = 1;
- }
- }
- wdt_reset_counter();
- return len;
- }
- return 0;
-}
-
-static int wdt_ioctl(struct inode *inode, struct file *file,
- unsigned int cmd, unsigned long arg)
-{
- int new_timeout;
- static struct watchdog_info ident = {
- .options = WDIOF_SETTIMEOUT |
- WDIOF_KEEPALIVEPING |
- WDIOF_MAGICCLOSE,
- .firmware_version = 0,
- .identity = "ADM5120_WDT Watchdog",
- };
- switch (cmd) {
- default:
- return -ENOTTY;
- case WDIOC_GETSUPPORT:
- if(copy_to_user((struct watchdog_info *)arg, &ident, sizeof(ident)))
- return -EFAULT;
- return 0;
- case WDIOC_GETSTATUS:
- case WDIOC_GETBOOTSTATUS:
- return put_user(0,(int *)arg);
- case WDIOC_KEEPALIVE:
- wdt_reset_counter();
- return 0;
- case WDIOC_SETTIMEOUT:
- if (get_user(new_timeout, (int *)arg))
- return -EFAULT;
- if (new_timeout < 1)
- return -EINVAL;
- if (new_timeout > MAX_TIMEOUT)
- return -EINVAL;
- timeout = new_timeout;
- wdt_set_timeout();
- /* Fall */
- case WDIOC_GETTIMEOUT:
- return put_user(timeout, (int *)arg);
- }
-}
-
-static struct file_operations wdt_fops = {
- owner: THIS_MODULE,
- llseek: no_llseek,
- write: wdt_write,
- ioctl: wdt_ioctl,
- open: wdt_open,
- release: wdt_release,
-};
-
-static struct miscdevice wdt_miscdev = {
- minor: WATCHDOG_MINOR,
- name: "watchdog",
- fops: &wdt_fops,
-};
-
-static char banner[] __initdata = KERN_INFO NAME ": Watchdog Timer version " VERSION "\n";
-
-static int __init watchdog_init(void)
-{
- int ret;
-
- ret = misc_register(&wdt_miscdev);
-
- if (ret)
- return ret;
-
- wdt_disable();
- printk(banner);
-
- return 0;
-}
-
-static void __exit watchdog_exit(void)
-{
- misc_deregister(&wdt_miscdev);
-}
-
-module_init(watchdog_init);
-module_exit(watchdog_exit);
diff --git a/target/linux/adm5120/files/include/asm-mips/mach-adm5120/adm5120_board.h b/target/linux/adm5120/files/include/asm-mips/mach-adm5120/adm5120_board.h
deleted file mode 100644
index ecb12d9e05..0000000000
--- a/target/linux/adm5120/files/include/asm-mips/mach-adm5120/adm5120_board.h
+++ /dev/null
@@ -1,59 +0,0 @@
-/*
- * $Id$
- *
- * ADM5120 board definitions
- *
- * Copyright (C) 2007 OpenWrt.org
- * Copyright (C) 2007 Gabor Juhos <juhosg at openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- *
- */
-
-#ifndef _ADM5120_BOARD_H_
-#define _ADM5120_BOARD_H_
-
-#include <linux/init.h>
-#include <linux/list.h>
-
-#define ADM5120_BOARD_NAMELEN 64
-
-struct adm5120_board {
- unsigned long mach_type;
- char name[ADM5120_BOARD_NAMELEN];
-
- void (*board_setup)(void);
- void (*board_reset)(void);
-
- unsigned int eth_num_ports;
- unsigned char *eth_vlans;
- unsigned int num_devices;
- struct platform_device **devices;
- unsigned int pci_nr_irqs;
- struct adm5120_pci_irq *pci_irq_map;
-
- struct list_head list;
-};
-
-extern void adm5120_board_register(struct adm5120_board *) __init;
-
-#define ADM5120_BOARD_START(_type, _name) \
-static struct adm5120_board adm5120_board_##_type __initdata; \
- \
-static __init int adm5120_board_##_type##_register(void) \
-{ \
- adm5120_board_register(&adm5120_board_##_type); \
- return 0; \
-} \
-pure_initcall(adm5120_board_##_type##_register); \
- \
-static struct adm5120_board adm5120_board_##_type __initdata = { \
- .mach_type = MACH_ADM5120_##_type, \
- .name = _name,
-
-#define ADM5120_BOARD_END \
-};
-
-#endif /* _ADM5120_BOARD_H_ */
diff --git a/target/linux/adm5120/files/include/asm-mips/mach-adm5120/adm5120_defs.h b/target/linux/adm5120/files/include/asm-mips/mach-adm5120/adm5120_defs.h
deleted file mode 100644
index bac8453479..0000000000
--- a/target/linux/adm5120/files/include/asm-mips/mach-adm5120/adm5120_defs.h
+++ /dev/null
@@ -1,56 +0,0 @@
-/*
- * $Id$
- *
- * ADM5120 SoC definitions
- *
- * This file defines some constants specific to the ADM5120 SoC
- *
- * Copyright (C) 2007 OpenWrt.org
- * Copyright (C) 2007 Gabor Juhos <juhosg at openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- *
- */
-#ifndef _ADM5120_DEFS_H
-#define _ADM5120_DEFS_H
-
-#define ADM5120_SDRAM0_BASE 0x00000000
-#define ADM5120_SDRAM1_BASE 0x01000000
-#define ADM5120_SRAM1_BASE 0x10000000
-#define ADM5120_EXTIO0_BASE 0x10C00000
-#define ADM5120_EXTIO0_SIZE 0x00200000
-#define ADM5120_EXTIO1_BASE 0x10E00000
-#define ADM5120_EXTIO1_SIZE 0x00200000
-#define ADM5120_MPMC_BASE 0x11000000
-#define ADM5120_MPMC_SIZE 0x00200000
-#define ADM5120_USBC_BASE 0x11200000
-#define ADM5120_USBC_SIZE 0x00200000
-#define ADM5120_PCIMEM_BASE 0x11400000
-#define ADM5120_PCIMEM_SIZE 0x00100000
-#define ADM5120_PCIIO_BASE 0x11500000
-#define ADM5120_PCIIO_SIZE 0x000FFFF0
-#define ADM5120_PCICFG_ADDR 0x115FFFF0
-#define ADM5120_PCICFG_DATA 0x115FFFF8
-#define ADM5120_PCICFG_SIZE 0x00000010
-#define ADM5120_SWITCH_BASE 0x12000000
-#define ADM5120_SWITCH_SIZE 0x00200000
-#define ADM5120_INTC_BASE 0x12200000
-#define ADM5120_INTC_SIZE 0x00200000
-#define ADM5120_UART0_BASE 0x12600000
-#define ADM5120_UART1_BASE 0x12800000
-#define ADM5120_UART_SIZE 0x00200000
-#define ADM5120_SRAM0_BASE 0x1FC00000
-
-#define ADM5120_NAND_BASE ADM5120_SRAM1_BASE
-#define ADM5120_NAND_SIZE 0xB
-
-#define ADM5120_CLK_175 175000000
-#define ADM5120_CLK_200 200000000
-#define ADM5120_CLK_225 225000000
-#define ADM5120_CLK_250 250000000
-
-#define ADM5120_UART_CLOCK 62500000
-
-#endif /* _ADM5120_DEFS_H */
diff --git a/target/linux/adm5120/files/include/asm-mips/mach-adm5120/adm5120_info.h b/target/linux/adm5120/files/include/asm-mips/mach-adm5120/adm5120_info.h
deleted file mode 100644
index 401000197f..0000000000
--- a/target/linux/adm5120/files/include/asm-mips/mach-adm5120/adm5120_info.h
+++ /dev/null
@@ -1,85 +0,0 @@
-/*
- * $Id$
- *
- * Copyright (C) 2007 OpenWrt.org
- * Copyright (C) 2007 Gabor Juhos <juhosg at openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- *
- */
-
-#ifndef _ADM5120_INFO_H
-#define _ADM5120_INFO_H
-
-#include <linux/types.h>
-
-extern unsigned int adm5120_prom_type;
-#define ADM5120_PROM_GENERIC 0
-#define ADM5120_PROM_CFE 1
-#define ADM5120_PROM_MYLOADER 2
-#define ADM5120_PROM_ROUTERBOOT 3
-#define ADM5120_PROM_BOOTBASE 4
-#define ADM5120_PROM_UBOOT 5
-#define ADM5120_PROM_LAST 5
-
-extern unsigned int adm5120_product_code;
-extern unsigned int adm5120_revision;
-extern unsigned int adm5120_nand_boot;
-
-extern unsigned long adm5120_speed;
-#define ADM5120_SPEED_175 175000000
-#define ADM5120_SPEED_200 200000000
-#define ADM5120_SPEED_225 225000000
-#define ADM5120_SPEED_250 250000000
-
-extern unsigned int adm5120_package;
-#define ADM5120_PACKAGE_PQFP 0
-#define ADM5120_PACKAGE_BGA 1
-
-extern unsigned long adm5120_memsize;
-
-/*
- * TODO:remove adm5120_eth* variables when the switch driver will be
- * converted into a real platform driver
- */
-extern unsigned int adm5120_eth_num_ports;
-extern unsigned char adm5120_eth_macs[6][6];
-extern unsigned char adm5120_eth_vlans[6];
-
-extern void adm5120_soc_init(void) __init;
-extern void adm5120_mem_init(void) __init;
-extern void adm5120_ndelay(u32 ns);
-
-extern void adm5120_restart(char *command);
-extern void adm5120_halt(void);
-
-extern void (*adm5120_board_reset)(void);
-
-extern void adm5120_gpio_init(void) __init;
-extern void adm5120_gpio_csx0_enable(void) __init;
-extern void adm5120_gpio_csx1_enable(void) __init;
-extern void adm5120_gpio_ew_enable(void) __init;
-
-static inline int adm5120_package_pqfp(void)
-{
- return (adm5120_package == ADM5120_PACKAGE_PQFP);
-}
-
-static inline int adm5120_package_bga(void)
-{
- return (adm5120_package == ADM5120_PACKAGE_BGA);
-}
-
-static inline int adm5120_has_pci(void)
-{
- return (adm5120_package == ADM5120_PACKAGE_BGA);
-}
-
-static inline int adm5120_has_gmii(void)
-{
- return (adm5120_package == ADM5120_PACKAGE_BGA);
-}
-
-#endif /* _ADM5120_INFO_H */
diff --git a/target/linux/adm5120/files/include/asm-mips/mach-adm5120/adm5120_intc.h b/target/linux/adm5120/files/include/asm-mips/mach-adm5120/adm5120_intc.h
deleted file mode 100644
index e8e4d99674..0000000000
--- a/target/linux/adm5120/files/include/asm-mips/mach-adm5120/adm5120_intc.h
+++ /dev/null
@@ -1,66 +0,0 @@
-/*
- * $Id$
- *
- * ADM5120 interrupt controller definitions
- *
- * This header file defines the hardware registers of the ADM5120 SoC
- * built-in interrupt controller.
- *
- * Copyright (C) 2007 OpenWrt.org
- * Copyright (C) 2007 Gabor Juhos <juhosg at openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- *
- */
-
-#ifndef _ADM5120_INTC_H_
-#define _ADM5120_INTC_H_
-
-/*
- * INTC register offsets
- */
-#define INTC_REG_IRQ_STATUS 0x00 /* Interrupt status after masking */
-#define INTC_REG_IRQ_RAW_STATUS 0x04 /* Interrupt status before masking */
-#define INTC_REG_IRQ_ENABLE 0x08 /* Used to enable the interrupt sources */
-#define INTC_REG_IRQ_ENABLE_CLEAR 0x0C /* Used to disable the interrupt sources */
-#define INTC_REG_IRQ_DISABLE INTC_REG_IRQ_ENABLE_CLEAR
-#define INTC_REG_INT_MODE 0x14 /* The interrupt mode of the sources */
-#define INTC_REG_FIQ_STATUS 0x18 /* FIQ status */
-#define INTC_REG_IRQ_TEST_SOURCE 0x1C
-#define INTC_REG_IRQ_SOURCE_SELECT 0x20
-#define INTC_REG_INT_LEVEL 0x24
-
-/*
- * INTC IRQ numbers
- */
-#define INTC_IRQ_TIMER 0 /* built in timer */
-#define INTC_IRQ_UART0 1 /* built-in UART0 */
-#define INTC_IRQ_UART1 2 /* built-in UART1 */
-#define INTC_IRQ_USBC 3 /* USB Host Controller */
-#define INTC_IRQ_GPIO2 4 /* GPIO line 2 */
-#define INTC_IRQ_GPIO4 5 /* GPIO line 4 */
-#define INTC_IRQ_PCI0 6 /* PCI slot 2 */
-#define INTC_IRQ_PCI1 7 /* PCI slot 3 */
-#define INTC_IRQ_PCI2 8 /* PCI slot 4 */
-#define INTC_IRQ_SWITCH 9 /* built-in ethernet switch */
-#define INTC_IRQ_LAST INTC_IRQ_SWITCH
-#define INTC_IRQ_COUNT 10
-
-/*
- * INTC register bits
- */
-#define INTC_INT_TIMER ( 1 << INTC_IRQ_TIMER )
-#define INTC_INT_UART0 ( 1 << INTC_IRQ_UART0 )
-#define INTC_INT_UART1 ( 1 << INTC_IRQ_UART1 )
-#define INTC_INT_USBC ( 1 << INTC_IRQ_USBC )
-#define INTC_INT_INTX0 ( 1 << INTC_IRQ_INTX0 )
-#define INTC_INT_INTX1 ( 1 << INTC_IRQ_INTX1 )
-#define INTC_INT_PCI0 ( 1 << INTC_IRQ_PCI0 )
-#define INTC_INT_PCI1 ( 1 << INTC_IRQ_PCI1 )
-#define INTC_INT_PCI2 ( 1 << INTC_IRQ_PCI2 )
-#define INTC_INT_SWITCH ( 1 << INTC_IRQ_SWITCH )
-#define INTC_INT_ALL (( 1 << INTC_IRQ_COUNT)-1)
-
-#endif /* _ADM5120_INTC_H_ */
diff --git a/target/linux/adm5120/files/include/asm-mips/mach-adm5120/adm5120_irq.h b/target/linux/adm5120/files/include/asm-mips/mach-adm5120/adm5120_irq.h
deleted file mode 100644
index 3ff69e7c5e..0000000000
--- a/target/linux/adm5120/files/include/asm-mips/mach-adm5120/adm5120_irq.h
+++ /dev/null
@@ -1,44 +0,0 @@
-/*
- * $Id$
- *
- * ADM5120 specific IRQ numbers
- *
- * Copyright (C) 2007 OpenWrt.org
- * Copyright (C) 2007 Gabor Juhos <juhosg at openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- *
- */
-#ifndef _ADM5120_IRQ_H_
-#define _ADM5120_IRQ_H_
-
-#include <asm/mach-adm5120/adm5120_intc.h>
-
-#define MIPS_IRQ_HW0 2
-#define MIPS_IRQ_COUNTER 7
-#define MIPS_IRQ_COUNT 8
-
-#define ADM5120_CPU_IRQ_BASE 0
-#define ADM5120_INTC_IRQ_BASE (ADM5120_CPU_IRQ_BASE+MIPS_IRQ_COUNT)
-#define ADM5120_SWITCH_IRQ_BASE (ADM5120_INTC_IRQ_BASE+INTC_IRQ_COUNT)
-
-#define ADM5120_CPU_IRQ(x) (ADM5120_CPU_IRQ_BASE + (x))
-#define ADM5120_INTC_IRQ(x) (ADM5120_INTC_IRQ_BASE + (x))
-
-#define ADM5120_IRQ_INTC ADM5120_CPU_IRQ(MIPS_IRQ_HW0)
-#define ADM5120_IRQ_COUNTER ADM5120_CPU_IRQ(MIPS_IRQ_COUNTER)
-
-#define ADM5120_IRQ_TIMER ADM5120_INTC_IRQ(INTC_IRQ_TIMER)
-#define ADM5120_IRQ_UART0 ADM5120_INTC_IRQ(INTC_IRQ_UART0)
-#define ADM5120_IRQ_UART1 ADM5120_INTC_IRQ(INTC_IRQ_UART1)
-#define ADM5120_IRQ_USBC ADM5120_INTC_IRQ(INTC_IRQ_USBC)
-#define ADM5120_IRQ_GPIO2 ADM5120_INTC_IRQ(INTC_IRQ_GPIO2)
-#define ADM5120_IRQ_GPIO4 ADM5120_INTC_IRQ(INTC_IRQ_GPIO4)
-#define ADM5120_IRQ_PCI0 ADM5120_INTC_IRQ(INTC_IRQ_PCI0)
-#define ADM5120_IRQ_PCI1 ADM5120_INTC_IRQ(INTC_IRQ_PCI1)
-#define ADM5120_IRQ_PCI2 ADM5120_INTC_IRQ(INTC_IRQ_PCI2)
-#define ADM5120_IRQ_SWITCH ADM5120_INTC_IRQ(INTC_IRQ_SWITCH)
-
-#endif
diff --git a/target/linux/adm5120/files/include/asm-mips/mach-adm5120/adm5120_mpmc.h b/target/linux/adm5120/files/include/asm-mips/mach-adm5120/adm5120_mpmc.h
deleted file mode 100644
index accd61ac3e..0000000000
--- a/target/linux/adm5120/files/include/asm-mips/mach-adm5120/adm5120_mpmc.h
+++ /dev/null
@@ -1,95 +0,0 @@
-/*
- * $Id$
- *
- * ADM5120 MPMC (Multiport Memory Controller) register definitions
- *
- * Copyright (C) 2007 OpenWrt.org
- * Copyright (C) 2007 Gabor Juhos <juhosg at openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- *
- */
-
-#ifndef _ADM5120_MPMC_H_
-#define _ADM5120_MPMC_H_
-
-#define MPMC_READ_REG(r) __raw_readl( \
- (void __iomem *)KSEG1ADDR(ADM5120_MPMC_BASE) + MPMC_REG_ ## r)
-#define MPMC_WRITE_REG(r, v) __raw_writel((v), \
- (void __iomem *)KSEG1ADDR(ADM5120_MPMC_BASE) + MPMC_REG_ ## r)
-
-#define MPMC_REG_CTRL 0x0000
-#define MPMC_REG_STATUS 0x0004
-#define MPMC_REG_CONF 0x0008
-#define MPMC_REG_DC 0x0020
-#define MPMC_REG_DR 0x0024
-#define MPMC_REG_DRP 0x0030
-
-#define MPMC_REG_DC0 0x0100
-#define MPMC_REG_DRC0 0x0104
-#define MPMC_REG_DC1 0x0120
-#define MPMC_REG_DRC1 0x0124
-#define MPMC_REG_DC2 0x0140
-#define MPMC_REG_DRC2 0x0144
-#define MPMC_REG_DC3 0x0160
-#define MPMC_REG_DRC3 0x0164
-#define MPMC_REG_SC0 0x0200 /* for F_CS1_N */
-#define MPMC_REG_SC1 0x0220 /* for F_CS0_N */
-#define MPMC_REG_SC2 0x0240
-#define MPMC_REG_WEN2 0x0244
-#define MPMC_REG_OEN2 0x0248
-#define MPMC_REG_RD2 0x024C
-#define MPMC_REG_PG2 0x0250
-#define MPMC_REG_WR2 0x0254
-#define MPMC_REG_TN2 0x0258
-#define MPMC_REG_SC3 0x0260
-
-/* Control register bits */
-#define MPMC_CTRL_AM ( 1 << 1 ) /* Address Mirror */
-#define MPMC_CTRL_LPM ( 1 << 2 ) /* Low Power Mode */
-#define MPMC_CTRL_DWB ( 1 << 3 ) /* Drain Write Buffers */
-
-/* Status register bits */
-#define MPMC_STATUS_BUSY ( 1 << 0 ) /* Busy */
-#define MPMC_STATUS_WBS ( 1 << 1 ) /* Write Buffer Status */
-#define MPMC_STATUS_SRA ( 1 << 2 ) /* Self-Refresh Acknowledge*/
-
-/* Dynamic Control register bits */
-#define MPMC_DC_CE ( 1 << 0 )
-#define MPMC_DC_DMC ( 1 << 1 )
-#define MPMC_DC_SRR ( 1 << 2 )
-#define MPMC_DC_SI_SHIFT 7
-#define MPMC_DC_SI_MASK ( 3 << 7 )
-#define MPMC_DC_SI_NORMAL ( 0 << 7 )
-#define MPMC_DC_SI_MODE ( 1 << 7 )
-#define MPMC_DC_SI_PALL ( 2 << 7 )
-#define MPMC_DC_SI_NOP ( 3 << 7 )
-
-#define SRAM_REG_CONF 0x00
-#define SRAM_REG_WWE 0x04
-#define SRAM_REG_WOE 0x08
-#define SRAM_REG_WRD 0x0C
-#define SRAM_REG_WPG 0x10
-#define SRAM_REG_WWR 0x14
-#define SRAM_REG_WTR 0x18
-
-/* Dynamic Configuration register bits */
-#define DC_BE (1 << 19) /* buffer enable */
-#define DC_RW_SHIFT 28 /* shift for number of rows */
-#define DC_RW_MASK 0x03
-#define DC_NB_SHIFT 26 /* shift for number of banks */
-#define DC_NB_MASK 0x01
-#define DC_CW_SHIFT 22 /* shift for number of columns */
-#define DC_CW_MASK 0x07
-#define DC_DW_SHIFT 7 /* shift for device width */
-#define DC_DW_MASK 0x03
-
-/* Static Configuration register bits */
-#define SC_MW_MASK 0x03 /* memory width mask */
-#define SC_MW_8 0x00 /* 8 bit memory width */
-#define SC_MW_16 0x01 /* 16 bit memory width */
-#define SC_MW_32 0x02 /* 32 bit memory width */
-
-#endif /* _ADM5120_MPMC_H_ */
diff --git a/target/linux/adm5120/files/include/asm-mips/mach-adm5120/adm5120_nand.h b/target/linux/adm5120/files/include/asm-mips/mach-adm5120/adm5120_nand.h
deleted file mode 100644
index 0c10629c57..0000000000
--- a/target/linux/adm5120/files/include/asm-mips/mach-adm5120/adm5120_nand.h
+++ /dev/null
@@ -1,91 +0,0 @@
-/*
- * ADM5120 NAND interface definitions
- *
- * This header file defines the hardware registers of the ADM5120 SoC
- * built-in NAND interface.
- *
- * Copyright (C) 2007 OpenWrt.org
- * Copyright (C) 2007 Gabor Juhos <juhosg at openwrt.org>
- *
- * NAND interface routines was based on a driver for Linux 2.6.19+ which
- * was derived from the driver for Linux 2.4.xx published by Mikrotik for
- * their RouterBoard 1xx and 5xx series boards.
- * Copyright (C) 2007 David Goodenough <david.goodenough@linkchoose.co.uk>
- * Copyright (C) 2007 Florian Fainelli <florian@openwrt.org>
- * The original Mikrotik code seems not to have a license.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- *
- */
-
-#ifndef _ADM5120_NAND_H_
-#define _ADM5120_NAND_H_
-
-#include <linux/types.h>
-#include <linux/io.h>
-
-#include <adm5120_defs.h>
-#include <adm5120_switch.h>
-
-/* NAND control registers */
-#define NAND_REG_DATA 0x0 /* data register */
-#define NAND_REG_SET_CEn 0x1 /* CE# low */
-#define NAND_REG_CLR_CEn 0x2 /* CE# high */
-#define NAND_REG_CLR_CLE 0x3 /* CLE low */
-#define NAND_REG_SET_CLE 0x4 /* CLE high */
-#define NAND_REG_CLR_ALE 0x5 /* ALE low */
-#define NAND_REG_SET_ALE 0x6 /* ALE high */
-#define NAND_REG_SET_SPn 0x7 /* SP# low (use spare area) */
-#define NAND_REG_CLR_SPn 0x8 /* SP# high (do not use spare area) */
-#define NAND_REG_SET_WPn 0x9 /* WP# low */
-#define NAND_REG_CLR_WPn 0xA /* WP# high */
-#define NAND_REG_STATUS 0xB /* Status register */
-
-#define ADM5120_NAND_STATUS_READY 0x80
-
-#define NAND_READ_REG(r) \
- readb((void __iomem *)KSEG1ADDR(ADM5120_NAND_BASE) + (r))
-#define NAND_WRITE_REG(r, v) \
- writeb((v),(void __iomem *)KSEG1ADDR(ADM5120_NAND_BASE) + (r))
-
-/*-------------------------------------------------------------------------*/
-
-static inline void adm5120_nand_enable(void)
-{
- SW_WRITE_REG(SWITCH_REG_BW_CNTL1, BW_CNTL1_NAND_ENABLE);
- SW_WRITE_REG(SWITCH_REG_BOOT_DONE, 1);
-}
-
-static inline void adm5120_nand_set_wpn(unsigned int set)
-{
- NAND_WRITE_REG((set) ? NAND_REG_SET_WPn : NAND_REG_CLR_WPn, 1);
-}
-
-static inline void adm5120_nand_set_spn(unsigned int set)
-{
- NAND_WRITE_REG((set) ? NAND_REG_SET_SPn : NAND_REG_CLR_SPn, 1);
-}
-
-static inline void adm5120_nand_set_cle(unsigned int set)
-{
- NAND_WRITE_REG((set) ? NAND_REG_SET_CLE : NAND_REG_CLR_CLE, 1);
-}
-
-static inline void adm5120_nand_set_ale(unsigned int set)
-{
- NAND_WRITE_REG((set) ? NAND_REG_SET_ALE : NAND_REG_CLR_ALE, 1);
-}
-
-static inline void adm5120_nand_set_cen(unsigned int set)
-{
- NAND_WRITE_REG((set) ? NAND_REG_SET_CEn : NAND_REG_CLR_CEn, 1);
-}
-
-static inline u8 adm5120_nand_get_status(void)
-{
- return NAND_READ_REG(NAND_REG_STATUS);
-}
-
-#endif /* _ADM5120_NAND_H_ */
diff --git a/target/linux/adm5120/files/include/asm-mips/mach-adm5120/adm5120_platform.h b/target/linux/adm5120/files/include/asm-mips/mach-adm5120/adm5120_platform.h
deleted file mode 100644
index d3b2213d32..0000000000
--- a/target/linux/adm5120/files/include/asm-mips/mach-adm5120/adm5120_platform.h
+++ /dev/null
@@ -1,95 +0,0 @@
-/*
- * $Id$
- *
- * ADM5120 specific platform definitions
- *
- * Copyright (C) 2007-2008 OpenWrt.org
- * Copyright (C) 2007-2008 Gabor Juhos <juhosg at openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- *
- */
-
-#ifndef _ADM5120_PLATFORM_H_
-#define _ADM5120_PLATFORM_H_
-
-#include <linux/device.h>
-#include <linux/platform_device.h>
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/map.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/nand.h>
-
-#include <linux/input.h>
-#include <linux/gpio_buttons.h>
-
-#include <linux/amba/bus.h>
-#include <linux/amba/serial.h>
-
-struct adm5120_flash_platform_data {
- void (*set_vpp)(struct map_info *, int);
- void (*switch_bank)(unsigned);
- u32 window_size;
-#ifdef CONFIG_MTD_PARTITIONS
- unsigned int nr_parts;
- struct mtd_partition *parts;
-#endif
-};
-
-struct adm5120_switch_platform_data {
- /* TODO: not yet implemented */
-};
-
-struct adm5120_pci_irq {
- u8 slot;
- u8 func;
- u8 pin;
- unsigned irq;
-};
-
-#define PCIIRQ(s,f,p,i) {.slot = (s), .func = (f), .pin = (p), .irq = (i)}
-
-#ifdef CONFIG_PCI
-extern void adm5120_pci_set_irq_map(unsigned int nr_irqs,
- struct adm5120_pci_irq *map) __init;
-#else
-static inline void adm5120_pci_set_irq_map(unsigned int nr_irqs,
- struct adm5120_pci_irq *map)
-{
-}
-#endif
-
-#define ADM5120_NUM_BUTTONS 5
-
-extern struct resource adm5120_gpiodev_resource;
-
-extern struct adm5120_flash_platform_data adm5120_flash0_data;
-extern struct adm5120_flash_platform_data adm5120_flash1_data;
-extern struct platform_nand_data adm5120_nand_data;
-extern struct adm5120_switch_platform_data adm5120_switch_data;
-extern struct gpio_button adm5120_buttons[ADM5120_NUM_BUTTONS];
-extern struct gpio_buttons_platform_data adm5120_buttons_data;
-extern struct amba_pl010_data adm5120_uart0_data;
-extern struct amba_pl010_data adm5120_uart1_data;
-
-extern struct platform_device adm5120_flash0_device;
-extern struct platform_device adm5120_flash1_device;
-extern struct platform_device adm5120_nand_device;
-extern struct platform_device adm5120_hcd_device;
-extern struct platform_device adm5120_switch_device;
-extern struct platform_device adm5120_buttons_device;
-extern struct platform_device adm5120_gpiodev_device;
-extern struct amba_device adm5120_uart0_device;
-extern struct amba_device adm5120_uart1_device;
-
-extern void adm5120_uart_set_mctrl(struct amba_device *dev, void __iomem *base,
- unsigned int mctrl);
-
-extern void adm5120_nand_cmd_ctrl(struct mtd_info *mtd, int cmd,
- unsigned int ctrl);
-extern int adm5120_nand_ready(struct mtd_info *mtd);
-
-#endif /* _ADM5120_PLATFORM_H_ */
diff --git a/target/linux/adm5120/files/include/asm-mips/mach-adm5120/adm5120_switch.h b/target/linux/adm5120/files/include/asm-mips/mach-adm5120/adm5120_switch.h
deleted file mode 100644
index 2dbb097763..0000000000
--- a/target/linux/adm5120/files/include/asm-mips/mach-adm5120/adm5120_switch.h
+++ /dev/null
@@ -1,303 +0,0 @@
-/*
- * $Id$
- *
- * ADM5120 ethernet switch definitions
- *
- * This header file defines the hardware registers of the ADM5120 SoC
- * built-in Ethernet switch.
- *
- * Copyright (C) 2007 OpenWrt.org
- * Copyright (C) 2007 Gabor Juhos <juhosg at openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- *
- */
-
-#ifndef _ADM5120_SWITCH_H_
-#define _ADM5120_SWITCH_H_
-
-#ifndef BIT
-# define BIT(at) (1 << (at))
-#endif
-#define BITMASK(len) (BIT(len)-1)
-
-#define SW_READ_REG(r) __raw_readl( \
- (void __iomem *)KSEG1ADDR(ADM5120_SWITCH_BASE) + r)
-#define SW_WRITE_REG(r, v) __raw_writel((v), \
- (void __iomem *)KSEG1ADDR(ADM5120_SWITCH_BASE) + r)
-
-/* Switch register offsets */
-#define SWITCH_REG_CODE 0x0000
-#define SWITCH_REG_SOFT_RESET 0x0004 /* Soft Reset */
-#define SWITCH_REG_BOOT_DONE 0x0008 /* Boot Done */
-#define SWITCH_REG_SW_RESET 0x000C /* Switch Reset */
-#define SWITCH_REG_PHY_STATUS 0x0014 /* PHY Status */
-#define SWITCH_REG_MEMCTRL 0x001C /* Memory Control */
-#define SWITCH_REG_CPUP_CONF 0x0024 /* CPU Port Configuration */
-#define SWITCH_REG_PORT_CONF0 0x0028 /* Port Configuration 0 */
-#define SWITCH_REG_PORT_CONF1 0x002C /* Port Configuration 1 */
-#define SWITCH_REG_PORT_CONF2 0x0030 /* Port Configuration 2 */
-#define SWITCH_REG_VLAN_G1 0x0040 /* VLAN group 1 */
-#define SWITCH_REG_VLAN_G2 0x0044 /* VLAN group 2 */
-#define SWITCH_REG_SEND_TRIG 0x0048 /* Send Trigger */
-#define SWITCH_REG_MAC_WT0 0x0058 /* MAC Write Address 0 */
-#define SWITCH_REG_MAC_WT1 0x005C /* MAC Write Address 1 */
-#define SWITCH_REG_BW_CNTL0 0x0060 /* Bandwidth Control 0 */
-#define SWITCH_REG_BW_CNTL1 0x0064 /* Bandwidth Control 1 */
-#define SWITCH_REG_PHY_CNTL0 0x0068 /* PHY Control 0 */
-#define SWITCH_REG_PHY_CNTL1 0x006C /* PHY Control 1 */
-#define SWITCH_REG_PORT_TH 0x0078 /* Port Threshold */
-#define SWITCH_REG_PHY_CNTL2 0x007C /* PHY Control 2 */
-#define SWITCH_REG_PHY_CNTL3 0x0080 /* PHY Control 3 */
-#define SWITCH_REG_PRI_CNTL 0x0084 /* Priority Control */
-#define SWITCH_REG_PHY_CNTL4 0x00A0 /* PHY Control 4 */
-#define SWITCH_REG_EMPTY_CNT 0x00A4 /* Empty Count */
-#define SWITCH_REG_PORT_CNTLS 0x00A8 /* Port Control Select */
-#define SWITCH_REG_PORT_CNTL 0x00AC /* Port Control */
-#define SWITCH_REG_INT_STATUS 0x00B0 /* Interrupt Status */
-#define SWITCH_REG_INT_MASK 0x00B4 /* Interrupt Mask */
-#define SWITCH_REG_GPIO_CONF0 0x00B8 /* GPIO Configuration 0 */
-#define SWITCH_REG_GPIO_CONF2 0x00BC /* GPIO Configuration 1 */
-#define SWITCH_REG_WDOG0 0x00C0 /* Watchdog 0 */
-#define SWITCH_REG_WDOG1 0x00C4 /* Watchdog 1 */
-
-#define SWITCH_REG_SHDA 0x00D0 /* Send High Descriptors Address */
-#define SWITCH_REG_SLDA 0x00D4 /* Send Low Descriptors Address */
-#define SWITCH_REG_RHDA 0x00D8 /* Receive High Descriptor Address */
-#define SWITCH_REG_RLDA 0x00DC /* Receive Low Descriptor Address */
-#define SWITCH_REG_SHWA 0x00E0 /* Send High Working Address */
-#define SWITCH_REG_SLWA 0x00E4 /* Send Low Working Address */
-#define SWITCH_REG_RHWA 0x00E8 /* Receive High Working Address */
-#define SWITCH_REG_RLWA 0x00EC /* Receive Low Working Address */
-
-#define SWITCH_REG_TIMER_INT 0x00F0 /* Timer */
-#define SWITCH_REG_TIMER 0x00F4 /* Timer Interrupt */
-
-#define SWITCH_REG_PORT0_LED 0x0100
-#define SWITCH_REG_PORT1_LED 0x0104
-#define SWITCH_REG_PORT2_LED 0x0108
-#define SWITCH_REG_PORT3_LED 0x010C
-#define SWITCH_REG_PORT4_LED 0x0110
-
-/* CODE register bits */
-#define CODE_PC_MASK BITMASK(16) /* Product Code */
-#define CODE_REV_SHIFT 16
-#define CODE_REV_MASK BITMASK(4) /* Product Revision */
-#define CODE_CLKS_SHIFT 20
-#define CODE_CLKS_MASK BITMASK(2) /* Clock Speed */
-#define CODE_CLKS_175 0 /* 175 MHz */
-#define CODE_CLKS_200 1 /* 200 MHz */
-#define CODE_CLKS_225 2 /* 225 MHz */
-#define CODE_CLKS_250 3 /* 250 MHz */
-#define CODE_NAB BIT(24) /* NAND boot */
-#define CODE_PK_MASK BITMASK(1) /* Package type */
-#define CODE_PK_SHIFT 29
-#define CODE_PK_BGA 0 /* BGA package */
-#define CODE_PK_PQFP 1 /* PQFP package */
-
-/* MEMCTRL register bits */
-#define MEMCTRL_SDRS_MASK BITMASK(3) /* SDRAM bank size */
-#define MEMCTRL_SDRS_4M 0x01
-#define MEMCTRL_SDRS_8M 0x02
-#define MEMCTRL_SDRS_16M 0x03
-#define MEMCTRL_SDRS_64M 0x04
-#define MEMCTRL_SDRS_128M 0x05
-#define MEMCTRL_SDR1_ENABLE BIT(5) /* enable SDRAM bank 1 */
-
-#define MEMCTRL_SRS0_SHIFT 8 /* shift for SRAM0 size */
-#define MEMCTRL_SRS1_SHIFT 16 /* shift for SRAM1 size */
-#define MEMCTRL_SRS_MASK BITMASK(3) /* SRAM size mask */
-#define MEMCTRL_SRS_DISABLED 0x00 /* Disabled */
-#define MEMCTRL_SRS_512K 0x01 /* 512KB*/
-#define MEMCTRL_SRS_1M 0x02 /* 1MB */
-#define MEMCTRL_SRS_2M 0x03 /* 2MB */
-#define MEMCTRL_SRS_4M 0x04 /* 4MB */
-
-/* Port bits used in various registers */
-#define SWITCH_PORT_PHY0 BIT(0)
-#define SWITCH_PORT_PHY1 BIT(1)
-#define SWITCH_PORT_PHY2 BIT(2)
-#define SWITCH_PORT_PHY3 BIT(3)
-#define SWITCH_PORT_PHY4 BIT(4)
-#define SWITCH_PORT_MII BIT(5)
-#define SWITCH_PORT_CPU BIT(6)
-
-/* Port bit shorthands */
-#define SWITCH_PORTS_PHY 0x1F /* phy ports */
-#define SWITCH_PORTS_NOCPU 0x3F /* physical ports */
-#define SWITCH_PORTS_ALL 0x7F /* all ports */
-
-/* CPUP_CONF register bits */
-#define CPUP_CONF_DCPUP BIT(0) /* Disable CPU port */
-#define CPUP_CONF_CRCP BIT(1) /* CRC padding from CPU */
-#define CPUP_CONF_BTM BIT(2) /* Bridge Testing Mode */
-#define CPUP_CONF_DUNP_SHIFT 9 /* Disable Unknown Packets for portX */
-#define CPUP_CONF_DMCP_SHIFT 16 /* Disable Mcast Packets form portX */
-#define CPUP_CONF_DBCP_SHIFT 24 /* Disable Bcast Packets form portX */
-
-/* PORT_CONF0 register bits */
-#define PORT_CONF0_DP_SHIFT 0 /* Disable Port */
-#define PORT_CONF0_EMCP_SHIFT 8 /* Enable All MC Packets */
-#define PORT_CONF0_BP_SHIFT 16 /* Enable Back Pressure */
-
-/* PORT_CONF1 register bits */
-#define PORT_CONF1_DISL_SHIFT 0 /* Disable Learning */
-#define PORT_CONF1_BS_SHIFT 6 /* Blocking State */
-#define PORT_CONF1_BM_SHIFT 12 /* Blocking Mode */
-
-/* SEND_TRIG register bits */
-#define SEND_TRIG_STL BIT(0) /* Send Trigger Low */
-#define SEND_TRIG_STH BIT(1) /* Send Trigger High */
-
-/* MAC_WT0 register bits */
-#define MAC_WT0_MAWC BIT(0) /* MAC address write command */
-#define MAC_WT0_MWD_SHIFT 1
-#define MAC_WT0_MWD BIT(1) /* MAC write done */
-#define MAC_WT0_WFB BIT(2) /* Write Filter Bit */
-#define MAC_WT0_WVN_SHIFT 3 /* Write Vlan Number shift */
-#define MAC_WT0_WVE BIT(6) /* Write VLAN enable */
-#define MAC_WT0_WPMN_SHIFT 7
-#define MAC_WT0_WAF_SHIFT 13 /* Write Age Field shift */
-#define MAC_WT0_WAF_EMPTY 0
-#define MAC_WT0_WAF_STATIC 7 /* age: static */
-#define MAC_WT0_MAC0_SHIFT 16
-#define MAC_WT0_MAC1_SHIFT 24
-
-/* MAC_WT1 register bits */
-#define MAC_WT1_MAC2_SHIFT 0
-#define MAC_WT1_MAC3_SHIFT 8
-#define MAC_WT1_MAC4_SHIFT 16
-#define MAC_WT1_MAC5_SHIFT 24
-
-/* BW_CNTL0/BW_CNTL1 register bits */
-#define BW_CNTL_DISABLE 0x00
-#define BW_CNTL_64K 0x01
-#define BW_CNTL_128K 0x02
-#define BW_CNTL_256K 0x03
-#define BW_CNTL_512K 0x04
-#define BW_CNTL_1M 0x05
-#define BW_CNTL_4M 0x06
-#define BW_CNTL_10M 0x07
-
-#define P4TBC_SHIFT 0
-#define P4RBC_SHIFT 4
-#define P5TBC_SHIFT 8
-#define P5RBC_SHIFT 12
-
-#define BW_CNTL1_NAND_ENABLE 0x100
-
-/* PHY_CNTL0 register bits */
-#define PHY_CNTL0_PHYA_MASK BITMASK(5)
-#define PHY_CNTL0_PHYR_MASK BITMASK(5)
-#define PHY_CNTL0_PHYR_SHIFT 8
-#define PHY_CNTL0_WC BIT(13) /* Write Command */
-#define PHY_CNTL0_RC BIT(14) /* Read Command */
-#define PHY_CNTL0_WTD_MASK BIT(16) /* Read Command */
-#define PHY_CNTL0_WTD_SHIFT 16
-
-/* PHY_CNTL1 register bits */
-#define PHY_CNTL1_WOD BIT(0) /* Write Operation Done */
-#define PHY_CNTL1_ROD BIT(1) /* Read Operation Done */
-#define PHY_CNTL1_RD_MASK BITMASK(16)
-#define PHY_CNTL1_RD_SHIFT 16
-
-/* PHY_CNTL2 register bits */
-#define PHY_CNTL2_ANE_SHIFT 0 /* Auto Negotiation Enable */
-#define PHY_CNTL2_SC_SHIFT 5 /* Speed Control */
-#define PHY_CNTL2_DC_SHIFT 10 /* Duplex Control */
-#define PHY_CNTL2_FNCV_SHIFT 15 /* Recommended FC Value */
-#define PHY_CNTL2_PHYR_SHIFT 20 /* PHY reset */
-#define PHY_CNTL2_AMDIX_SHIFT 25 /* Auto MDIX enable */
-/* PHY_CNTL2_RMAE is bad in datasheet */
-#define PHY_CNTL2_RMAE BIT(31) /* Recommended MCC Average enable */
-
-/* PHY_CNTL3 register bits */
-#define PHY_CNTL3_RNT BIT(10) /* Recommend Normal Threshold */
-
-/* PORT_TH register bits */
-#define PORT_TH_PPT_MASK BITMASK(8) /* Per Port Threshold */
-#define PORT_TH_CPUT_SHIFT 8 /* CPU Port Buffer Threshold */
-#define PORT_TH_CPUT_MASK BITMASK(8)
-#define PORT_TH_CPUHT_SHIFT 16 /* CPU Hold Threshold */
-#define PORT_TH_CPUHT_MASK BITMASK(8)
-#define PORT_TH_CPURT_SHIFT 24 /* CPU Release Threshold */
-#define PORT_TH_CPURT_MASK BITMASK(8)
-
-/* EMPTY_CNT register bits */
-#define EMPTY_CNT_EBGB_MASK BITMASK(9) /* Empty Blocks in the Global Buffer */
-
-/* GPIO_CONF0 register bits */
-#define GPIO_CONF0_MASK BITMASK(8)
-#define GPIO_CONF0_IM_SHIFT 0
-#define GPIO_CONF0_IV_SHIFT 8
-#define GPIO_CONF0_OE_SHIFT 16
-#define GPIO_CONF0_OV_SHIFT 24
-#define GPIO_CONF0_IM_MASK (0xFF << GPIO_CONF0_IM_SHIFT)
-#define GPIO_CONF0_IV_MASK (0xFF << GPIO_CONF0_IV_SHIFT)
-#define GPIO_CONF0_OE_MASK (0xFF << GPIO_CONF0_OE_SHIFT)
-#define GPIO_CONF0_OV_MASK (0xFF << GPIO_CONF0_OV_SHIFT)
-
-/* GPIO_CONF2 register bits */
-#define GPIO_CONF2_CSX0 BIT(4) /* enable CSX0:INTX0 on GPIO 1:2 */
-#define GPIO_CONF2_CSX1 BIT(5) /* enable CSX1:INTX1 on GPIO 3:4 */
-#define GPIO_CONF2_EW BIT(6) /* enable wait state pin for CSX0/1 */
-
-/* INT_STATUS/INT_MASK register bits */
-#define SWITCH_INT_SHD BIT(0) /* Send High Done */
-#define SWITCH_INT_SLD BIT(1) /* Send Low Done */
-#define SWITCH_INT_RHD BIT(2) /* Receive High Done */
-#define SWITCH_INT_RLD BIT(3) /* Receive Low Done */
-#define SWITCH_INT_HDF BIT(4) /* High Descriptor Full */
-#define SWITCH_INT_LDF BIT(5) /* Low Descriptor Full */
-#define SWITCH_INT_P0QF BIT(6) /* Port0 Queue Full */
-#define SWITCH_INT_P1QF BIT(7) /* Port1 Queue Full */
-#define SWITCH_INT_P2QF BIT(8) /* Port2 Queue Full */
-#define SWITCH_INT_P3QF BIT(9) /* Port3 Queue Full */
-#define SWITCH_INT_P4QF BIT(10) /* Port4 Queue Full */
-#define SWITCH_INT_P5QF BIT(11) /* Port5 Queue Full */
-#define SWITCH_INT_CPQF BIT(13) /* CPU Queue Full */
-#define SWITCH_INT_GQF BIT(14) /* Global Queue Full */
-#define SWITCH_INT_MD BIT(15) /* Must Drop */
-#define SWITCH_INT_BCS BIT(16) /* BC Storm */
-#define SWITCH_INT_PSC BIT(18) /* Port Status Change */
-#define SWITCH_INT_ID BIT(19) /* Intruder Detected */
-#define SWITCH_INT_W0TE BIT(20) /* Watchdog 0 Timer Expired */
-#define SWITCH_INT_W1TE BIT(21) /* Watchdog 1 Timer Expired */
-#define SWITCH_INT_RDE BIT(22) /* Receive Descriptor Error */
-#define SWITCH_INT_SDE BIT(23) /* Send Descriptor Error */
-#define SWITCH_INT_CPUH BIT(24) /* CPU Hold */
-
-/* TIMER_INT register bits */
-#define TIMER_INT_TOS BIT(0) /* time-out status */
-#define TIMER_INT_TOM BIT(16) /* mask time-out interrupt */
-
-/* TIMER register bits */
-#define TIMER_PERIOD_MASK BITMASK(16) /* mask for timer period */
-#define TIMER_PERIOD_DEFAULT 0xFFFF /* default timer period */
-#define TIMER_TE BIT(16) /* timer enable bit */
-
-/* PORTx_LED register bits */
-#define LED_MODE_MASK BITMASK(4)
-#define LED_MODE_INPUT 0
-#define LED_MODE_FLASH 1
-#define LED_MODE_OUT_HIGH 2
-#define LED_MODE_OUT_LOW 3
-#define LED_MODE_LINK 4
-#define LED_MODE_SPEED 5
-#define LED_MODE_DUPLEX 6
-#define LED_MODE_ACT 7
-#define LED_MODE_COLL 8
-#define LED_MODE_LINK_ACT 9
-#define LED_MODE_DUPLEX_COLL 10
-#define LED_MODE_10M_ACT 11
-#define LED_MODE_100M_ACT 12
-#define LED0_MODE_SHIFT 0 /* LED0 mode shift */
-#define LED1_MODE_SHIFT 4 /* LED1 mode shift */
-#define LED2_MODE_SHIFT 8 /* LED2 mode shift */
-#define LED0_IV_SHIFT 12 /* LED0 input value shift */
-#define LED1_IV_SHIFT 13 /* LED1 input value shift */
-#define LED2_IV_SHIFT 14 /* LED2 input value shift */
-
-#endif /* _ADM5120_SWITCH_H_ */
diff --git a/target/linux/adm5120/files/include/asm-mips/mach-adm5120/adm5120_uart.h b/target/linux/adm5120/files/include/asm-mips/mach-adm5120/adm5120_uart.h
deleted file mode 100644
index 09db7d8771..0000000000
--- a/target/linux/adm5120/files/include/asm-mips/mach-adm5120/adm5120_uart.h
+++ /dev/null
@@ -1,65 +0,0 @@
-/*
- * ADM5120 UART definitions
- *
- * This header file defines the hardware registers of the ADM5120 SoC
- * built-in UARTs.
- *
- * Copyright (C) 2007 OpenWrt.org
- * Copyright (C) 2007 Gabor Juhos <juhosg at openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- *
- */
-
-#ifndef _ADM5120_UART_H_
-#define _ADM5120_UART_H_
-
-#define UART_BAUDDIV(clk, baud) ((clk/(16 * (baud)))-1)
-
-#define UART_REG_DATA 0x00
-#define UART_REG_RSR 0x04
-#define UART_REG_ECR UART_REG_RSR
-#define UART_REG_LCRH 0x08
-#define UART_REG_LCRM 0x0C
-#define UART_REG_LCRL 0x10
-#define UART_REG_CTRL 0x14
-#define UART_REG_FLAG 0x18
-
-/* Receive Status Register bits */
-#define UART_RSR_FE ( 1 << 0 )
-#define UART_RSR_PE ( 1 << 1 )
-#define UART_RSR_BE ( 1 << 2 )
-#define UART_RSR_OE ( 1 << 3 )
-#define UART_RSR_ERR ( UART_RSR_FE | UART_RSR_PE | UART_RSR_BE )
-
-#define UART_ECR_ALL 0xFF
-
-/* Line Control High register bits */
-#define UART_LCRH_BRK ( 1 << 0 ) /* send break */
-#define UART_LCRH_PEN ( 1 << 1 ) /* parity enable */
-#define UART_LCRH_EPS ( 1 << 2 ) /* even parity select */
-#define UART_LCRH_STP1 ( 0 << 3 ) /* one stop bits select */
-#define UART_LCRH_STP2 ( 1 << 3 ) /* two stop bits select */
-#define UART_LCRH_FEN ( 1 << 4 ) /* FIFO enable */
-
-#define UART_LCRH_WLEN5 ( 0 << 5 )
-#define UART_LCRH_WLEN6 ( 1 << 5 )
-#define UART_LCRH_WLEN7 ( 2 << 5 )
-#define UART_LCRH_WLEN8 ( 3 << 5 )
-
-/* Control register bits */
-#define UART_CTRL_EN ( 1 << 0 )
-
-/* Flag register bits */
-#define UART_FLAG_CTS ( 1 << 0 )
-#define UART_FLAG_DSR ( 1 << 1 )
-#define UART_FLAG_DCD ( 1 << 2 )
-#define UART_FLAG_BUSY ( 1 << 3 )
-#define UART_FLAG_RXFE ( 1 << 4 )
-#define UART_FLAG_TXFF ( 1 << 5 )
-#define UART_FLAG_RXFF ( 1 << 6 )
-#define UART_FLAG_TXFE ( 1 << 7 )
-
-#endif /* _ADM5120_UART_H_ */
diff --git a/target/linux/adm5120/files/include/asm-mips/mach-adm5120/asm/sizes.h b/target/linux/adm5120/files/include/asm-mips/mach-adm5120/asm/sizes.h
deleted file mode 100644
index 503843db15..0000000000
--- a/target/linux/adm5120/files/include/asm-mips/mach-adm5120/asm/sizes.h
+++ /dev/null
@@ -1,56 +0,0 @@
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-/* DO NOT EDIT!! - this file automatically generated
- * from .s file by awk -f s2h.awk
- */
-/* Size definitions
- * Copyright (C) ARM Limited 1998. All rights reserved.
- */
-
-#ifndef __sizes_h
-#define __sizes_h 1
-
-/* handy sizes */
-#define SZ_16 0x00000010
-#define SZ_256 0x00000100
-#define SZ_512 0x00000200
-
-#define SZ_1K 0x00000400
-#define SZ_4K 0x00001000
-#define SZ_8K 0x00002000
-#define SZ_16K 0x00004000
-#define SZ_64K 0x00010000
-#define SZ_128K 0x00020000
-#define SZ_256K 0x00040000
-#define SZ_512K 0x00080000
-
-#define SZ_1M 0x00100000
-#define SZ_2M 0x00200000
-#define SZ_4M 0x00400000
-#define SZ_8M 0x00800000
-#define SZ_16M 0x01000000
-#define SZ_32M 0x02000000
-#define SZ_64M 0x04000000
-#define SZ_128M 0x08000000
-#define SZ_256M 0x10000000
-#define SZ_512M 0x20000000
-
-#define SZ_1G 0x40000000
-#define SZ_2G 0x80000000
-
-#endif
-
-/* END */
diff --git a/target/linux/adm5120/files/include/asm-mips/mach-adm5120/cpu-feature-overrides.h b/target/linux/adm5120/files/include/asm-mips/mach-adm5120/cpu-feature-overrides.h
deleted file mode 100644
index 1ca5559c2d..0000000000
--- a/target/linux/adm5120/files/include/asm-mips/mach-adm5120/cpu-feature-overrides.h
+++ /dev/null
@@ -1,79 +0,0 @@
-/*
- * $Id$
- *
- * ADM5120 specific CPU feature overrides
- *
- * Copyright (C) 2007 OpenWrt.org
- * Copyright (C) 2007 Gabor Juhos <juhosg at openwrt.org>
- *
- * This file was derived from: include/asm-mips/cpu-features.h
- * Copyright (C) 2003, 2004 Ralf Baechle
- * Copyright (C) 2004 Maciej W. Rozycki
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- *
- */
-#ifndef __ASM_MACH_ADM5120_CPU_FEATURE_OVERRIDES_H
-#define __ASM_MACH_ADM5120_CPU_FEATURE_OVERRIDES_H
-
-#ifdef CONFIG_ADM5120_CPU_OVERRIDES
-
-/*
- * The ADM5120 SOC has a built-in MIPS 4Kc core.
- */
-#define cpu_has_tlb 1
-#define cpu_has_4kex 1
-#define cpu_has_3k_cache 0
-#define cpu_has_4k_cache 1
-#define cpu_has_tx39_cache 0
-#define cpu_has_sb1_cache 0
-#define cpu_has_fpu 0
-#define cpu_has_32fpr 0
-#define cpu_has_counter 1
-#define cpu_has_watch 1
-#define cpu_has_divec 1
-/* #define cpu_has_vce ? */
-/* #define cpu_has_cache_cdex_p ? */
-/* #define cpu_has_cache_cdex_s ? */
-#define cpu_has_prefetch 1
-/* #define cpu_has_mcheck ? */
-#define cpu_has_ejtag 1
-#define cpu_has_llsc 1
-
-#define cpu_has_mips16 0
-#define cpu_has_mdmx 0
-#define cpu_has_mips3d 0
-#define cpu_has_smartmips 0
-
-/* #define cpu_has_vtag_icache ? */
-/* #define cpu_has_dc_aliases ? */
-/* #define cpu_has_ic_fills_f_dc ? */
-/* #define cpu_has_pindexed_dcache ? */
-
-/* #define cpu_icache_snoops_remote_store ? */
-
-#define cpu_has_mips32r1 1
-#define cpu_has_mips32r2 0
-#define cpu_has_mips64r1 0
-#define cpu_has_mips64r2 0
-
-#define cpu_has_dsp 0
-#define cpu_has_mipsmt 0
-
-/* #define cpu_has_nofpuex ? */
-#define cpu_has_64bits 0
-#define cpu_has_64bit_zero_reg 0
-#define cpu_has_64bit_gp_regs 0
-#define cpu_has_64bit_addresses 0
-
-/* #define cpu_has_inclusive_pcaches ? */
-
-#define cpu_dcache_line_size() 16
-#define cpu_icache_line_size() 16
-
-#endif /* CONFIG_ADM5120_CPU_OVERRIDES */
-
-
-#endif /* __ASM_MACH_ADM5120_CPU_FEATURE_OVERRIDES_H */
diff --git a/target/linux/adm5120/files/include/asm-mips/mach-adm5120/gpio.h b/target/linux/adm5120/files/include/asm-mips/mach-adm5120/gpio.h
deleted file mode 100644
index 1075d2124e..0000000000
--- a/target/linux/adm5120/files/include/asm-mips/mach-adm5120/gpio.h
+++ /dev/null
@@ -1,115 +0,0 @@
-/*
- * $Id$
- *
- * ADM5120 GPIO wrappers for arch-neutral GPIO calls
- *
- * Copyright (C) 2007 OpenWrt.org
- * Copyright (C) 2007 Gabor Juhos <juhosg at openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- *
- */
-
-#ifndef _ADM5120_GPIO_H_
-#define _ADM5120_GPIO_H_
-
-#include <asm/mach-adm5120/adm5120_switch.h>
-
-#define ADM5120_GPIO_PIN0 0
-#define ADM5120_GPIO_PIN1 1
-#define ADM5120_GPIO_PIN2 2
-#define ADM5120_GPIO_PIN3 3
-#define ADM5120_GPIO_PIN4 4
-#define ADM5120_GPIO_PIN5 5
-#define ADM5120_GPIO_PIN6 6
-#define ADM5120_GPIO_PIN7 7
-#define ADM5120_GPIO_P0L0 8
-#define ADM5120_GPIO_P0L1 9
-#define ADM5120_GPIO_P0L2 10
-#define ADM5120_GPIO_P1L0 11
-#define ADM5120_GPIO_P1L1 12
-#define ADM5120_GPIO_P1L2 13
-#define ADM5120_GPIO_P2L0 14
-#define ADM5120_GPIO_P2L1 15
-#define ADM5120_GPIO_P2L2 16
-#define ADM5120_GPIO_P3L0 17
-#define ADM5120_GPIO_P3L1 18
-#define ADM5120_GPIO_P3L2 19
-#define ADM5120_GPIO_P4L0 20
-#define ADM5120_GPIO_P4L1 21
-#define ADM5120_GPIO_P4L2 22
-#define ADM5120_GPIO_MAX 22
-#define ADM5120_GPIO_COUNT ADM5120_GPIO_MAX+1
-
-#define ADM5120_GPIO_LOW 0
-#define ADM5120_GPIO_HIGH 1
-
-#define ADM5120_GPIO_SWITCH 0x10
-#define ADM5120_GPIO_FLASH (ADM5120_GPIO_SWITCH | LED_MODE_FLASH)
-#define ADM5120_GPIO_LINK (ADM5120_GPIO_SWITCH | LED_MODE_LINK)
-#define ADM5120_GPIO_SPEED (ADM5120_GPIO_SWITCH | LED_MODE_SPEED)
-#define ADM5120_GPIO_DUPLEX (ADM5120_GPIO_SWITCH | LED_MODE_DUPLEX)
-#define ADM5120_GPIO_ACT (ADM5120_GPIO_SWITCH | LED_MODE_ACT)
-#define ADM5120_GPIO_COLL (ADM5120_GPIO_SWITCH | LED_MODE_COLL)
-#define ADM5120_GPIO_LINK_ACT (ADM5120_GPIO_SWITCH | LED_MODE_LINK_ACT)
-#define ADM5120_GPIO_DUPLEX_COLL (ADM5120_GPIO_SWITCH | LED_MODE_DUPLEX_COLL)
-#define ADM5120_GPIO_10M_ACT (ADM5120_GPIO_SWITCH | LED_MODE_10M_ACT)
-#define ADM5120_GPIO_100M_ACT (ADM5120_GPIO_SWITCH | LED_MODE_100M_ACT)
-
-extern int adm5120_gpio_direction_input(unsigned gpio);
-extern int adm5120_gpio_direction_output(unsigned gpio, int value);
-extern int adm5120_gpio_get_value(unsigned gpio);
-extern void adm5120_gpio_set_value(unsigned gpio, int value);
-extern int adm5120_gpio_request(unsigned gpio, const char *label);
-extern void adm5120_gpio_free(unsigned gpio);
-extern int adm5120_gpio_to_irq(unsigned gpio);
-extern int adm5120_irq_to_gpio(unsigned irq);
-
-/*
- * Wrappers for the generic GPIO layer
- */
-static inline int gpio_direction_input(unsigned gpio)
-{
- return adm5120_gpio_direction_input(gpio);
-}
-
-static inline int gpio_direction_output(unsigned gpio, int value)
-{
- return adm5120_gpio_direction_output(gpio,value);
-}
-
-static inline int gpio_get_value(unsigned gpio)
-{
- return adm5120_gpio_get_value(gpio);
-}
-
-static inline void gpio_set_value(unsigned gpio, int value)
-{
- adm5120_gpio_set_value(gpio, value);
-}
-
-static inline int gpio_request(unsigned gpio, const char *label)
-{
- return adm5120_gpio_request(gpio, label);
-}
-
-static inline void gpio_free(unsigned gpio)
-{
- adm5120_gpio_free(gpio);
-}
-
-static inline int gpio_to_irq(unsigned gpio)
-{
- return adm5120_gpio_to_irq(gpio);
-}
-
-static inline int irq_to_gpio(unsigned irq)
-{
- return adm5120_irq_to_gpio(irq);
-}
-
-#include <asm-generic/gpio.h> /* cansleep wrappers */
-
-#endif
diff --git a/target/linux/adm5120/files/include/asm-mips/mach-adm5120/prom/cfe.h b/target/linux/adm5120/files/include/asm-mips/mach-adm5120/prom/cfe.h
deleted file mode 100644
index 9d122bb901..0000000000
--- a/target/linux/adm5120/files/include/asm-mips/mach-adm5120/prom/cfe.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- * $Id$
- *
- * Broadcom's CFE definitions
- *
- * Copyright (C) 2006,2007 Gabor Juhos <juhosg at openwrt.org>
- * Copyright (C) 2007 OpenWrt.org
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- *
- */
-
-#ifndef _PROM_CFE_H_
-#define _PROM_CFE_H_
-
-extern int cfe_present(void) __init;
-extern char *cfe_getenv(char *);
-
-#endif /*_PROM_CFE_H_*/
diff --git a/target/linux/adm5120/files/include/asm-mips/mach-adm5120/prom/generic.h b/target/linux/adm5120/files/include/asm-mips/mach-adm5120/prom/generic.h
deleted file mode 100644
index 3cebd57b2a..0000000000
--- a/target/linux/adm5120/files/include/asm-mips/mach-adm5120/prom/generic.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- * $Id$
- *
- * Generic prom definitions
- *
- * Copyright (C) 2006,2007 Gabor Juhos <juhosg at openwrt.org>
- * Copyright (C) 2007 OpenWrt.org
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- *
- */
-
-#ifndef _PROM_GENERIC_H_
-#define _PROM_GENERIC_H_
-
-extern int generic_prom_present(void) __init;
-extern char *generic_prom_getenv(char *);
-
-#endif /*_PROM_GENERIC_H_*/
diff --git a/target/linux/adm5120/files/include/asm-mips/mach-adm5120/prom/myloader.h b/target/linux/adm5120/files/include/asm-mips/mach-adm5120/prom/myloader.h
deleted file mode 100644
index 5736a44e1b..0000000000
--- a/target/linux/adm5120/files/include/asm-mips/mach-adm5120/prom/myloader.h
+++ /dev/null
@@ -1,181 +0,0 @@
-/*
- * $Id$
- *
- * Compex's MyLoader specific definitions
- *
- * Copyright (C) 2006,2007 Gabor Juhos <juhosg at openwrt.org>
- * Copyright (C) 2007 OpenWrt.org
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- *
- */
-
-#ifndef _MYLOADER_H_
-#define _MYLOADER_H_
-
-/*
- * Firmware file format:
- *
- * <header>
- * [<block descriptor 0>]
- * ...
- * [<block descriptor n>]
- * <null block descriptor>
- * [<block data 0>]
- * ...
- * [<block data n>]
- *
- *
- */
-
-/* Myloader specific magic numbers */
-#define MYLO_MAGIC_FIRMWARE 0x4C594D00
-#define MYLO_MAGIC_20021103 0x20021103
-#define MYLO_MAGIC_20021107 0x20021107
-
-#define MYLO_MAGIC_SYS_PARAMS MYLO_MAGIC_20021107
-#define MYLO_MAGIC_PARTITIONS MYLO_MAGIC_20021103
-#define MYLO_MAGIC_BOARD_PARAMS MYLO_MAGIC_20021103
-
-/*
- * Addresses of the data structures provided by MyLoader
- */
-#define MYLO_MIPS_SYS_PARAMS 0x80000800 /* System Parameters */
-#define MYLO_MIPS_BOARD_PARAMS 0x80000A00 /* Board Parameters */
-#define MYLO_MIPS_PARTITIONS 0x80000C00 /* Partition Table */
-#define MYLO_MIPS_BOOT_PARAMS 0x80000E00 /* Boot Parameters */
-
-/* Vendor ID's (seems to be same as the PCI vendor ID's) */
-#define VENID_COMPEX 0x11F6
-
-/* Devices based on the ADM5120 */
-#define DEVID_COMPEX_NP27G 0x0078
-#define DEVID_COMPEX_NP28G 0x044C
-#define DEVID_COMPEX_NP28GHS 0x044E
-#define DEVID_COMPEX_WP54Gv1C 0x0514
-#define DEVID_COMPEX_WP54G 0x0515
-#define DEVID_COMPEX_WP54AG 0x0546
-#define DEVID_COMPEX_WPP54AG 0x0550
-#define DEVID_COMPEX_WPP54G 0x0555
-
-/* Devices based on the IXP422 */
-#define DEVID_COMPEX_WP18 0x047E
-#define DEVID_COMPEX_NP18A 0x0489
-
-/* Other devices */
-#define DEVID_COMPEX_NP26G8M 0x03E8
-#define DEVID_COMPEX_NP26G16M 0x03E9
-
-struct mylo_fw_header {
- uint32_t magic; /* must be MYLO_MAGIC_FIRMWARE */
- uint32_t crc; /* CRC of the whole firmware */
- uint32_t res0; /* unknown/unused */
- uint32_t res1; /* unknown/unused */
- uint16_t vid; /* vendor ID */
- uint16_t did; /* device ID */
- uint16_t svid; /* sub vendor ID */
- uint16_t sdid; /* sub device ID */
- uint32_t rev; /* device revision */
- uint32_t fwhi; /* FIXME: firmware version high? */
- uint32_t fwlo; /* FIXME: firmware version low? */
- uint32_t flags; /* firmware flags */
-};
-
-#define FW_FLAG_BOARD_PARAMS_WP 0x01 /* board parameters are write protected */
-#define FW_FLAG_BOOT_SECTOR_WE 0x02 /* enable of write boot sectors (below 64K) */
-
-struct mylo_fw_blockdesc {
- uint32_t type; /* block type */
- uint32_t addr; /* relative address to flash start */
- uint32_t dlen; /* size of block data in bytes */
- uint32_t blen; /* total size of block in bytes */
-};
-
-#define FW_DESC_TYPE_UNUSED 0
-#define FW_DESC_TYPE_USED 1
-
-struct mylo_partition {
- uint16_t flags; /* partition flags */
- uint16_t type; /* type of the partition */
- uint32_t addr; /* relative address of the partition from the
- flash start */
- uint32_t size; /* size of the partition in bytes */
- uint32_t param; /* if this is the active partition, the
- MyLoader load code to this address */
-};
-
-#define PARTITION_FLAG_ACTIVE 0x8000 /* this is the active partition,
- * MyLoader loads firmware from here */
-#define PARTITION_FLAG_ISRAM 0x2000 /* FIXME: this is a RAM partition? */
-#define PARTIIION_FLAG_RAMLOAD 0x1000 /* FIXME: load this partition into the RAM? */
-#define PARTITION_FLAG_PRELOAD 0x0800 /* the partition data preloaded to RAM
- * before decompression */
-#define PARTITION_FLAG_HAVEHDR 0x0002 /* the partition data have a header */
-
-#define PARTITION_TYPE_FREE 0
-#define PARTITION_TYPE_USED 1
-
-#define MYLO_MAX_PARTITIONS 8 /* maximum number of partitions in the
- partition table */
-
-struct mylo_partition_table {
- uint32_t magic; /* must be MYLO_MAGIC_PARTITIONS */
- uint32_t res0; /* unknown/unused */
- uint32_t res1; /* unknown/unused */
- uint32_t res2; /* unknown/unused */
- struct mylo_partition partitions[MYLO_MAX_PARTITIONS];
-};
-
-struct mylo_partition_header {
- uint32_t len; /* length of the partition data */
- uint32_t crc; /* CRC value of the partition data */
-};
-
-struct mylo_system_params {
- uint32_t magic; /* must be MYLO_MAGIC_SYS_PARAMS */
- uint32_t res0;
- uint32_t res1;
- uint32_t mylo_ver;
- uint16_t vid; /* Vendor ID */
- uint16_t did; /* Device ID */
- uint16_t svid; /* Sub Vendor ID */
- uint16_t sdid; /* Sub Device ID */
- uint32_t rev; /* device revision */
- uint32_t fwhi;
- uint32_t fwlo;
- uint32_t tftp_addr;
- uint32_t prog_start;
- uint32_t flash_size; /* Size of boot FLASH in bytes */
- uint32_t dram_size; /* Size of onboard RAM in bytes */
-};
-
-
-struct mylo_eth_addr {
- uint8_t mac[6];
- uint8_t csum[2];
-};
-
-#define MYLO_ETHADDR_COUNT 8 /* maximum number of ethernet address
- in the board parameters */
-
-struct mylo_board_params {
- uint32_t magic; /* must be MYLO_MAGIC_BOARD_PARAMS */
- uint32_t res0;
- uint32_t res1;
- uint32_t res2;
- struct mylo_eth_addr addr[MYLO_ETHADDR_COUNT];
-};
-
-struct myloader_info {
- u32 vid;
- u32 did;
- u32 svid;
- u32 sdid;
-};
-
-extern struct myloader_info myloader_info;
-extern int myloader_present(void) __init;
-
-#endif /* _MYLOADER_H_*/
diff --git a/target/linux/adm5120/files/include/asm-mips/mach-adm5120/prom/routerboot.h b/target/linux/adm5120/files/include/asm-mips/mach-adm5120/prom/routerboot.h
deleted file mode 100644
index 77d14295bc..0000000000
--- a/target/linux/adm5120/files/include/asm-mips/mach-adm5120/prom/routerboot.h
+++ /dev/null
@@ -1,128 +0,0 @@
-/*
- * $Id$
- *
- * Mikrotik's RouterBOOT definitions
- *
- * Copyright (C) 2007 OpenWrt.org
- * Copyright (C) 2007 Gabor Juhos <juhosg at openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- *
- */
-
-#ifndef _ROUTERBOOT_H
-#define _ROUTERBOOT_H
-
-#define RB_MAC_SIZE 6
-
-struct rb_bios_settings {
- u32 hs_offs; /* hard settings offset */
- u32 hs_size; /* hard settings size */
- u32 fw_offs; /* firmware offset */
- u32 ss_offs; /* soft settings offset */
- u32 ss_size; /* soft settings size */
-};
-
-struct rb_hard_settings {
- char *name; /* board name */
- char *bios_ver; /* BIOS version */
- u32 mem_size; /* memory size in bytes */
- u32 mac_count; /* number of mac addresses */
- u8 *mac_base; /* mac address base */
-};
-
-/*
- * Magic numbers
- */
-#define RB_MAGIC_HARD 0x64726148 /* "Hard" */
-#define RB_MAGIC_SOFT 0x74666F53 /* "Soft" */
-#define RB_MAGIC_DAWN 0x6E776144 /* "Dawn" */
-
-#define RB_ID_TERMINATOR 0
-
-/*
- * ID values for Hardware settings
- */
-#define RB_ID_HARD_01 1
-#define RB_ID_HARD_02 2
-#define RB_ID_FLASH_INFO 3
-#define RB_ID_MAC_ADDRESS_PACK 4
-#define RB_ID_BOARD_NAME 5
-#define RB_ID_BIOS_VERSION 6
-#define RB_ID_HARD_07 7
-#define RB_ID_SDRAM_TIMINGS 8
-#define RB_ID_DEVICE_TIMINGS 9
-#define RB_ID_SOFTWARE_ID 10
-#define RB_ID_SERIAL_NUMBER 11
-#define RB_ID_HARD_12 12
-#define RB_ID_MEMORY_SIZE 13
-#define RB_ID_MAC_ADDRESS_COUNT 14
-
-/*
- * ID values for Software settings
- */
-#define RB_ID_UART_SPEED 1
-#define RB_ID_BOOT_DELAY 2
-#define RB_ID_BOOT_DEVICE 3
-#define RB_ID_BOOT_KEY 4
-#define RB_ID_CPU_MODE 5
-#define RB_ID_FW_VERSION 6
-#define RB_ID_SOFT_07 7
-#define RB_ID_SOFT_08 8
-#define RB_ID_BOOT_PROTOCOL 9
-#define RB_ID_SOFT_10 10
-#define RB_ID_SOFT_11 11
-
-/*
- * UART_SPEED values
- */
-#define RB_UART_SPEED_115200 0
-#define RB_UART_SPEED_57600 1
-#define RB_UART_SPEED_38400 2
-#define RB_UART_SPEED_19200 3
-#define RB_UART_SPEED_9600 4
-#define RB_UART_SPEED_4800 5
-#define RB_UART_SPEED_2400 6
-#define RB_UART_SPEED_1200 7
-
-/*
- * BOOT_DELAY values
- */
-#define RB_BOOT_DELAY_0SEC 0
-#define RB_BOOT_DELAY_1SEC 1
-#define RB_BOOT_DELAY_2SEC 2
-
-/*
- * BOOT_DEVICE values
- */
-#define RB_BOOT_DEVICE_ETHER 0
-#define RB_BOOT_DEVICE_NANDETH 1
-#define RB_BOOT_DEVICE_ETHONCE 2
-#define RB_BOOT_DEVICE_NANDONLY 3
-
-/*
- * BOOT_KEY values
- */
-#define RB_BOOT_KEY_ANY 0
-#define RB_BOOT_KEY_DEL 1
-
-/*
- * CPU_MODE values
- */
-#define RB_CPU_MODE_POWERSAVE 0
-#define RB_CPU_MODE_REGULAR 1
-
-/*
- * BOOT_PROTOCOL values
- */
-#define RB_BOOT_PROTOCOL_BOOTP 0
-#define RB_BOOT_PROTOCOL_DHCP 1
-
-extern int routerboot_present(void) __init;
-extern char *routerboot_get_boardname(void);
-
-extern struct rb_hard_settings rb_hs;
-
-#endif /* _ROUTERBOOT_H */
diff --git a/target/linux/adm5120/files/include/asm-mips/mach-adm5120/prom/zynos.h b/target/linux/adm5120/files/include/asm-mips/mach-adm5120/prom/zynos.h
deleted file mode 100644
index 9ebf332b45..0000000000
--- a/target/linux/adm5120/files/include/asm-mips/mach-adm5120/prom/zynos.h
+++ /dev/null
@@ -1,89 +0,0 @@
-/*
- * $Id$
- *
- * ZyNOS (ZyXEL's Networking OS) definitions
- *
- * Copyright (C) 2007 OpenWrt.org
- * Copyright (C) 2007 Gabor Juhos <juhosg at openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- *
- */
-
-#ifndef _ZYNOS_H
-#define _ZYNOS_H
-
-#define ZYNOS_NAME_LEN 32
-#define ZYNOS_FEAT_BYTES 22
-#define ZYNOS_MAC_LEN 6
-
-struct zynos_board_info {
- unsigned char vendor[ZYNOS_NAME_LEN];
- unsigned char product[ZYNOS_NAME_LEN];
- u32 bootext_addr;
- u32 res0;
- u16 board_id;
- u8 res1[6];
- u8 feat_other[ZYNOS_FEAT_BYTES];
- u8 feat_main;
- u8 res2;
- u8 mac[ZYNOS_MAC_LEN];
- u8 country;
- u8 dbgflag;
-} __attribute__ ((packed));
-
-/*
- * Vendor IDs
- */
-#define ZYNOS_VENDOR_ID_ZYXEL 0
-#define ZYNOS_VENDOR_ID_NETGEAR 1
-#define ZYNOS_VENDOR_ID_DLINK 2
-#define ZYNOS_VENDOR_ID_OTHER 3
-#define ZYNOS_VENDOR_ID_LUCENT 4
-
-/*
- * Vendor names
- */
-#define ZYNOS_VENDOR_DLINK "D-Link"
-#define ZYNOS_VENDOR_LUCENT "LUCENT"
-#define ZYNOS_VENDOR_NETGEAR "NetGear"
-#define ZYNOS_VENDOR_ZYXEL "ZyXEL"
-
-/*
- * Board IDs (big-endian)
- */
-#define ZYNOS_BOARD_ES2108 0x00F2 /* Ethernet Switch 2108 */
-#define ZYNOS_BOARD_ES2108F 0x01AF /* Ethernet Switch 2108-F */
-#define ZYNOS_BOARD_ES2108G 0x00F3 /* Ethernet Switch 2108-G */
-#define ZYNOS_BOARD_ES2108LC 0x00FC /* Ethernet Switch 2108-LC */
-#define ZYNOS_BOARD_ES2108PWR 0x00F4 /* Ethernet Switch 2108PWR */
-#define ZYNOS_BOARD_HS100 0x9FF1 /* HomeSafe 100/100W */
-#define ZYNOS_BOARD_P334 0x9FF5 /* Prestige 334 */
-#define ZYNOS_BOARD_P334U 0x9FDD /* Prestige 334U */
-#define ZYNOS_BOARD_P334W 0x9FF3 /* Prestige 334W */
-#define ZYNOS_BOARD_P334WH 0x00E0 /* Prestige 334WH */
-#define ZYNOS_BOARD_P334WHD 0x00E1 /* Prestige 334WHD */
-#define ZYNOS_BOARD_P334WT 0x9FEF /* Prestige 334WT */
-#define ZYNOS_BOARD_P334WT_ALT 0x9F02 /* Prestige 334WT alternative */
-#define ZYNOS_BOARD_P335 0x9FED /* Prestige 335/335WT */
-#define ZYNOS_BOARD_P335PLUS 0x0025 /* Prestige 335Plus */
-#define ZYNOS_BOARD_P335U 0x9FDC /* Prestige 335U */
-
-/*
- * Some magic numbers (big-endian)
- */
-#define ZYNOS_MAGIC_DBGAREA1 0x48646267 /* "Hdbg" */
-#define ZYNOS_MAGIC_DBGAREA2 0x61726561 /* "area" */
-
-struct bootbase_info {
- u16 vendor_id;
- u16 board_id;
- u8 mac[6];
-};
-
-extern struct bootbase_info bootbase_info;
-extern int bootbase_present(void) __init;
-
-#endif /* _ZYNOS_H */
diff --git a/target/linux/adm5120/files/include/asm-mips/mach-adm5120/war.h b/target/linux/adm5120/files/include/asm-mips/mach-adm5120/war.h
deleted file mode 100644
index 87c35f375b..0000000000
--- a/target/linux/adm5120/files/include/asm-mips/mach-adm5120/war.h
+++ /dev/null
@@ -1,25 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2002, 2004, 2007 by Ralf Baechle <ralf@linux-mips.org>
- */
-#ifndef __ASM_MIPS_MACH_ADM5120_WAR_H
-#define __ASM_MIPS_MACH_ADM5120_WAR_H
-
-#define R4600_V1_INDEX_ICACHEOP_WAR 0
-#define R4600_V1_HIT_CACHEOP_WAR 0
-#define R4600_V2_HIT_CACHEOP_WAR 0
-#define R5432_CP0_INTERRUPT_WAR 0
-#define BCM1250_M3_WAR 0
-#define SIBYTE_1956_WAR 0
-#define MIPS4K_ICACHE_REFILL_WAR 0
-#define MIPS_CACHE_SYNC_WAR 0
-#define TX49XX_ICACHE_INDEX_INV_WAR 0
-#define RM9000_CDEX_SMP_WAR 0
-#define ICACHE_REFILLS_WORKAROUND_WAR 0
-#define R10000_LLSC_WAR 0
-#define MIPS34K_MISSED_ITLB_WAR 0
-
-#endif /* __ASM_MIPS_MACH_ADM5120_WAR_H */
diff --git a/target/linux/adm5120/patches/001-adm5120.patch b/target/linux/adm5120/patches/001-adm5120.patch
deleted file mode 100644
index 290dbd6843..0000000000
--- a/target/linux/adm5120/patches/001-adm5120.patch
+++ /dev/null
@@ -1,112 +0,0 @@
---- a/arch/mips/Kconfig
-+++ b/arch/mips/Kconfig
-@@ -18,6 +18,21 @@
- prompt "System type"
- default SGI_IP22
-
-+config MIPS_ADM5120
-+ bool "ADM5120 SoC based machines"
-+ select CEVT_R4K
-+ select CSRC_R4K
-+ select SYS_HAS_CPU_MIPS32_R1
-+ select SYS_HAS_EARLY_PRINTK
-+ select DMA_NONCOHERENT
-+ select HW_HAS_PCI
-+ select IRQ_CPU
-+ select SYS_SUPPORTS_LITTLE_ENDIAN
-+ select SYS_SUPPORTS_BIG_ENDIAN
-+ select SYS_SUPPORTS_32BIT_KERNEL
-+ select GENERIC_GPIO
-+ select SWAP_IO_SPACE if CPU_BIG_ENDIAN
-+
- config MACH_ALCHEMY
- bool "Alchemy processor based machines"
-
-@@ -683,6 +698,7 @@
-
- endchoice
-
-+source "arch/mips/adm5120/Kconfig"
- source "arch/mips/au1000/Kconfig"
- source "arch/mips/basler/excite/Kconfig"
- source "arch/mips/jazz/Kconfig"
---- a/arch/mips/Makefile
-+++ b/arch/mips/Makefile
-@@ -174,6 +174,16 @@
- load-$(CONFIG_MACH_JAZZ) += 0xffffffff80080000
-
- #
-+# ADMtek 5120
-+#
-+
-+libs-$(CONFIG_MIPS_ADM5120) += arch/mips/adm5120/prom/
-+core-$(CONFIG_MIPS_ADM5120) += arch/mips/adm5120/
-+core-$(CONFIG_MIPS_ADM5120) += arch/mips/adm5120/boards/
-+cflags-$(CONFIG_MIPS_ADM5120) += -Iinclude/asm-mips/mach-adm5120
-+load-$(CONFIG_MIPS_ADM5120) += 0xffffffff80001000
-+
-+#
- # Common Alchemy Au1x00 stuff
- #
- core-$(CONFIG_SOC_AU1X00) += arch/mips/au1000/common/
---- a/include/asm-mips/bootinfo.h
-+++ b/include/asm-mips/bootinfo.h
-@@ -94,6 +94,58 @@
- #define MACH_MSP7120_FPGA 5 /* PMC-Sierra MSP7120 Emulation */
- #define MACH_MSP_OTHER 255 /* PMC-Sierra unknown board type */
-
-+/*
-+ * Valid machtype for group ADMtek ADM5120
-+ */
-+#define MACH_ADM5120_GENERIC 0 /* Generic board */
-+#define MACH_ADM5120_WP54G_WRT 1 /* Compex WP54G-WRT */
-+#define MACH_ADM5120_WP54G 2 /* Compex WP54G */
-+#define MACH_ADM5120_WP54AG 3 /* Compex WP54AG */
-+#define MACH_ADM5120_WPP54G 4 /* Compex WPP54G */
-+#define MACH_ADM5120_WPP54AG 5 /* Compex WPP54AG */
-+#define MACH_ADM5120_NP28G 6 /* Compex NP28G */
-+#define MACH_ADM5120_NP28GHS 7 /* Compex NP28G HotSpot */
-+#define MACH_ADM5120_NP27G 8 /* Compex NP27G */
-+#define MACH_ADM5120_WP54Gv1C 9 /* Compex WP54G version 1C */
-+#define MACH_ADM5120_RB_111 10 /* Mikrotik RouterBOARD 111 */
-+#define MACH_ADM5120_RB_112 11 /* Mikrotik RouterBOARD 112 */
-+#define MACH_ADM5120_RB_133 12 /* Mikrotik RouterBOARD 133 */
-+#define MACH_ADM5120_RB_133C 13 /* Mikrotik RouterBOARD 133c */
-+#define MACH_ADM5120_RB_150 14 /* Mikrotik RouterBOARD 150 */
-+#define MACH_ADM5120_RB_153 15 /* Mikrotik RouterBOARD 153 */
-+#define MACH_ADM5120_HS100 16 /* ZyXEL HomeSafe 100/100W */
-+#define MACH_ADM5120_P334 17 /* ZyXEL Prestige 334 */
-+#define MACH_ADM5120_P334U 18 /* ZyXEL Prestige 334U */
-+#define MACH_ADM5120_P334W 19 /* ZyXEL Prestige 334W */
-+#define MACH_ADM5120_P334WH 20 /* ZyXEL Prestige 334WH */
-+#define MACH_ADM5120_P334WHD 21 /* ZyXEL Prestige 334WHD */
-+#define MACH_ADM5120_P334WT 22 /* ZyXEL Prestige 334WT */
-+#define MACH_ADM5120_P335 23 /* ZyXEL Prestige 335/335WT */
-+#define MACH_ADM5120_P335PLUS 24 /* ZyXEL Prestige 335Plus */
-+#define MACH_ADM5120_P335U 25 /* ZyXEL Prestige 335U */
-+#define MACH_ADM5120_ES2108 26 /* ZyXEL Ethernet Switch 2108 */
-+#define MACH_ADM5120_ES2108F 27 /* ZyXEL Ethernet Switch 2108-F */
-+#define MACH_ADM5120_ES2108G 28 /* ZyXEL Ethernet Switch 2108-G */
-+#define MACH_ADM5120_ES2108LC 29 /* ZyXEL Ethernet Switch 2108-LC */
-+#define MACH_ADM5120_ES2108PWR 30 /* ZyXEL Ethernet Switch 2108-PWR */
-+#define MACH_ADM5120_ES2024A 31 /* ZyXEL Ethernet Switch 2024A */
-+#define MACH_ADM5120_ES2024PWR 32 /* ZyXEL Ethernet Switch 2024PWR */
-+#define MACH_ADM5120_CAS630 33 /* Cellvision CAS-630/630W */
-+#define MACH_ADM5120_CAS670 34 /* Cellvision CAS-670/670W */
-+#define MACH_ADM5120_CAS700 36 /* Cellvision CAS-700/700W */
-+#define MACH_ADM5120_CAS771 37 /* Cellvision CAS-771/771W */
-+#define MACH_ADM5120_CAS790 38 /* Cellvision CAS-790 */
-+#define MACH_ADM5120_CAS861 39 /* Cellvision CAS-861/861W */
-+#define MACH_ADM5120_NFS101U 40 /* Cellvision NFS-101U/101WU */
-+#define MACH_ADM5120_NFS202U 41 /* Cellvision NFS-202U/202WU */
-+#define MACH_ADM5120_EASY5120PATA 42 /* Infineon EASY 5120P-ATA */
-+#define MACH_ADM5120_EASY5120RT 43 /* Infineon EASY 5120-RT */
-+#define MACH_ADM5120_EASY5120WVOIP 44 /* Infineon EASY 5120-WVoIP */
-+#define MACH_ADM5120_EASY83000 45 /* Infineon EASY-83000 */
-+#define MACH_ADM5120_BR6104K 46 /* Edimax BR-6104K/BR-6104KP */
-+#define MACH_ADM5120_RB_192 47 /* Mikrotik RouterBOARD 192 */
-+#define MACH_ADM5120_BR61x4WG 48 /* Edimax BR-6104Wg/BR-6114WG */
-+
- #define CL_SIZE COMMAND_LINE_SIZE
-
- extern char *system_type;
diff --git a/target/linux/adm5120/patches/002-adm5120_flash.patch b/target/linux/adm5120/patches/002-adm5120_flash.patch
deleted file mode 100644
index 143952321a..0000000000
--- a/target/linux/adm5120/patches/002-adm5120_flash.patch
+++ /dev/null
@@ -1,22 +0,0 @@
---- a/drivers/mtd/maps/Kconfig
-+++ b/drivers/mtd/maps/Kconfig
-@@ -590,5 +590,9 @@
-
- This selection automatically selects the map_ram driver.
-
-+config MTD_ADM5120
-+ tristate "Map driver for ADM5120 based boards"
-+ depends on MIPS_ADM5120
-+
- endmenu
-
---- a/drivers/mtd/maps/Makefile
-+++ b/drivers/mtd/maps/Makefile
-@@ -44,6 +44,7 @@
- obj-$(CONFIG_MTD_SOLUTIONENGINE)+= solutionengine.o
- obj-$(CONFIG_MTD_PCI) += pci.o
- obj-$(CONFIG_MTD_ALCHEMY) += alchemy-flash.o
-+obj-$(CONFIG_MTD_ADM5120) += adm5120-flash.o
- obj-$(CONFIG_MTD_AUTCPU12) += autcpu12-nvram.o
- obj-$(CONFIG_MTD_EDB7312) += edb7312.o
- obj-$(CONFIG_MTD_IMPA7) += impa7.o
diff --git a/target/linux/adm5120/patches/003-adm5120_switch.patch b/target/linux/adm5120/patches/003-adm5120_switch.patch
deleted file mode 100644
index 20718119fa..0000000000
--- a/target/linux/adm5120/patches/003-adm5120_switch.patch
+++ /dev/null
@@ -1,23 +0,0 @@
---- a/drivers/net/Kconfig
-+++ b/drivers/net/Kconfig
-@@ -606,6 +606,10 @@
- If you have an Alchemy Semi AU1X00 based system
- say Y. Otherwise, say N.
-
-+config MIPS_ADM5120_ENET
-+ tristate "MIPS ADM5120 Ethernet switch support"
-+ depends on MIPS_ADM5120
-+
- config SGI_IOC3_ETH
- bool "SGI IOC3 Ethernet"
- depends on PCI && SGI_IP27
---- a/drivers/net/Makefile
-+++ b/drivers/net/Makefile
-@@ -187,6 +187,7 @@
- # This is also a 82596 and should probably be merged
- obj-$(CONFIG_LP486E) += lp486e.o
-
-+obj-$(CONFIG_MIPS_ADM5120_ENET) += adm5120sw.o
- obj-$(CONFIG_ETH16I) += eth16i.o
- obj-$(CONFIG_ZORRO8390) += zorro8390.o
- obj-$(CONFIG_HPLANCE) += hplance.o 7990.o
diff --git a/target/linux/adm5120/patches/005-adm5120_usb.patch b/target/linux/adm5120/patches/005-adm5120_usb.patch
deleted file mode 100644
index 4ab31dd980..0000000000
--- a/target/linux/adm5120/patches/005-adm5120_usb.patch
+++ /dev/null
@@ -1,29 +0,0 @@
---- a/drivers/usb/host/Kconfig
-+++ b/drivers/usb/host/Kconfig
-@@ -260,3 +260,6 @@
- To compile this driver as a module, choose M here: the
- module will be called r8a66597-hcd.
-
-+config USB_ADM5120_HCD
-+ tristate "ADM5120 HCD support (EXPERIMENTAL)"
-+ depends on USB && MIPS_ADM5120 && EXPERIMENTAL
---- a/drivers/usb/host/Makefile
-+++ b/drivers/usb/host/Makefile
-@@ -8,6 +8,7 @@
-
- obj-$(CONFIG_PCI) += pci-quirks.o
-
-+obj-$(CONFIG_USB_ADM5120_HCD) += adm5120-hcd.o
- obj-$(CONFIG_USB_EHCI_HCD) += ehci-hcd.o
- obj-$(CONFIG_USB_ISP116X_HCD) += isp116x-hcd.o
- obj-$(CONFIG_USB_OHCI_HCD) += ohci-hcd.o
---- a/drivers/usb/Makefile
-+++ b/drivers/usb/Makefile
-@@ -16,6 +16,7 @@
- obj-$(CONFIG_USB_SL811_HCD) += host/
- obj-$(CONFIG_USB_U132_HCD) += host/
- obj-$(CONFIG_USB_R8A66597_HCD) += host/
-+obj-$(CONFIG_USB_ADM5120_HCD) += host/
-
- obj-$(CONFIG_USB_ACM) += class/
- obj-$(CONFIG_USB_PRINTER) += class/
diff --git a/target/linux/adm5120/patches/006-adm5120_leds.patch b/target/linux/adm5120/patches/006-adm5120_leds.patch
deleted file mode 100644
index ac108e512f..0000000000
--- a/target/linux/adm5120/patches/006-adm5120_leds.patch
+++ /dev/null
@@ -1,34 +0,0 @@
---- a/drivers/leds/Kconfig
-+++ b/drivers/leds/Kconfig
-@@ -25,6 +25,21 @@
- This option enables support for LEDs driven using outputs
- of the dedicated PWM controller found on newer Atmel SOCs.
-
-+config LEDS_ADM5120
-+ tristate "LED Support for ADM5120 GPIO LEDs"
-+ depends on LEDS_GPIO && MIPS_ADM5120
-+ help
-+ This option enables support for LEDs connected to GPIO lines
-+ on ADM5120 SoC based platforms.
-+
-+config LEDS_ADM5120_EXPERIMENTAL
-+ bool "Enable ADM5120 LEDs experimental code"
-+ depends on LEDS_ADM5120
-+
-+config LEDS_ADM5120_DIAG
-+ bool "Enable ADM5120 LEDs diagnostic mode"
-+ depends on LEDS_ADM5120
-+
- config LEDS_CORGI
- tristate "LED Support for the Sharp SL-C7x0 series"
- depends on LEDS_CLASS && PXA_SHARP_C7xx
---- a/drivers/leds/Makefile
-+++ b/drivers/leds/Makefile
-@@ -5,6 +5,7 @@
- obj-$(CONFIG_LEDS_TRIGGERS) += led-triggers.o
-
- # LED Platform Drivers
-+obj-$(CONFIG_LEDS_ADM5120) += leds-adm5120.o
- obj-$(CONFIG_LEDS_ATMEL_PWM) += leds-atmel-pwm.o
- obj-$(CONFIG_LEDS_CORGI) += leds-corgi.o
- obj-$(CONFIG_LEDS_LOCOMO) += leds-locomo.o
diff --git a/target/linux/adm5120/patches/007-adm5120_pci.patch b/target/linux/adm5120/patches/007-adm5120_pci.patch
deleted file mode 100644
index 75d3be65c4..0000000000
--- a/target/linux/adm5120/patches/007-adm5120_pci.patch
+++ /dev/null
@@ -1,19 +0,0 @@
---- a/arch/mips/pci/Makefile
-+++ b/arch/mips/pci/Makefile
-@@ -48,3 +48,4 @@
- obj-$(CONFIG_VICTOR_MPC30X) += fixup-mpc30x.o
- obj-$(CONFIG_ZAO_CAPCELLA) += fixup-capcella.o
- obj-$(CONFIG_WR_PPMC) += fixup-wrppmc.o
-+obj-$(CONFIG_PCI_ADM5120) += pci-adm5120.o
---- a/include/linux/pci_ids.h
-+++ b/include/linux/pci_ids.h
-@@ -1705,6 +1705,9 @@
- #define PCI_VENDOR_ID_ESDGMBH 0x12fe
- #define PCI_DEVICE_ID_ESDGMBH_CPCIASIO4 0x0111
-
-+#define PCI_VENDOR_ID_ADMTEK 0x1317
-+#define PCI_DEVICE_ID_ADMTEK_ADM5120 0x5120
-+
- #define PCI_VENDOR_ID_SIIG 0x131f
- #define PCI_SUBVENDOR_ID_SIIG 0x131f
- #define PCI_DEVICE_ID_SIIG_1S_10x_550 0x1000
diff --git a/target/linux/adm5120/patches/009-adm5120_leds_switch_trigger.patch b/target/linux/adm5120/patches/009-adm5120_leds_switch_trigger.patch
deleted file mode 100644
index 18280ed85e..0000000000
--- a/target/linux/adm5120/patches/009-adm5120_leds_switch_trigger.patch
+++ /dev/null
@@ -1,22 +0,0 @@
---- a/drivers/leds/Kconfig
-+++ b/drivers/leds/Kconfig
-@@ -213,4 +213,12 @@
- This allows LEDs to be initialised in the ON state.
- If unsure, say Y.
-
-+config LEDS_TRIGGER_ADM5120_SWITCH
-+ tristate "LED ADM5120 Switch Port Status Trigger"
-+ depends on LEDS_TRIGGERS && LEDS_ADM5120
-+ help
-+ This allows LEDs to be controlled by the port states of
-+ the ADM5120 built-in Ethernet Switch
-+ If unsure, say N.
-+
- endif # NEW_LEDS
---- a/drivers/leds/Makefile
-+++ b/drivers/leds/Makefile
-@@ -30,3 +30,4 @@
- obj-$(CONFIG_LEDS_TRIGGER_HEARTBEAT) += ledtrig-heartbeat.o
- obj-$(CONFIG_LEDS_TRIGGER_MORSE) += ledtrig-morse.o
- obj-$(CONFIG_LEDS_TRIGGER_DEFAULT_ON) += ledtrig-default-on.o
-+obj-$(CONFIG_LEDS_TRIGGER_ADM5120_SWITCH) += ledtrig-adm5120-switch.o
diff --git a/target/linux/adm5120/patches/100-mtd_myloder_partition_parser.patch b/target/linux/adm5120/patches/100-mtd_myloder_partition_parser.patch
deleted file mode 100644
index f5188936da..0000000000
--- a/target/linux/adm5120/patches/100-mtd_myloder_partition_parser.patch
+++ /dev/null
@@ -1,35 +0,0 @@
---- a/drivers/mtd/Kconfig
-+++ b/drivers/mtd/Kconfig
-@@ -168,6 +168,22 @@
- the partition map from the children of the flash node,
- as described in Documentation/powerpc/booting-without-of.txt.
-
-+config MTD_MYLOADER_PARTS
-+ tristate "MyLoader partition parsing"
-+ depends on MIPS_ADM5120 && MTD_PARTITIONS
-+ ---help---
-+ MyLoader is a bootloader which allows the user to define partitions
-+ in flash devices, by putting a table in the second erase block
-+ on the device, similar to a partition table. This table gives the
-+ offsets and lengths of the user defined partitions.
-+
-+ If you need code which can detect and parse these tables, and
-+ register MTD 'partitions' corresponding to each image detected,
-+ enable this option.
-+
-+ You will still need the parsing functions to be called by the driver
-+ for your particular device. It won't happen automatically.
-+
- comment "User Modules And Translation Layers"
-
- config MTD_CHAR
---- a/drivers/mtd/Makefile
-+++ b/drivers/mtd/Makefile
-@@ -12,6 +12,7 @@
- obj-$(CONFIG_MTD_CMDLINE_PARTS) += cmdlinepart.o
- obj-$(CONFIG_MTD_AFS_PARTS) += afs.o
- obj-$(CONFIG_MTD_OF_PARTS) += ofpart.o
-+obj-$(CONFIG_MTD_MYLOADER_PARTS) += myloader.o
-
- # 'Users' - code which presents functionality to userspace.
- obj-$(CONFIG_MTD_CHAR) += mtdchar.o
diff --git a/target/linux/adm5120/patches/101-cfi_fixup_macronix_bootloc.patch b/target/linux/adm5120/patches/101-cfi_fixup_macronix_bootloc.patch
deleted file mode 100644
index 9179088934..0000000000
--- a/target/linux/adm5120/patches/101-cfi_fixup_macronix_bootloc.patch
+++ /dev/null
@@ -1,91 +0,0 @@
---- a/drivers/mtd/chips/cfi_cmdset_0002.c
-+++ b/drivers/mtd/chips/cfi_cmdset_0002.c
-@@ -47,12 +47,19 @@
- #define MANUFACTURER_AMD 0x0001
- #define MANUFACTURER_ATMEL 0x001F
- #define MANUFACTURER_SST 0x00BF
-+#define MANUFACTURER_MACRONIX 0x00C2
- #define SST49LF004B 0x0060
- #define SST49LF040B 0x0050
- #define SST49LF008A 0x005a
- #define AT49BV6416 0x00d6
- #define MANUFACTURER_SAMSUNG 0x00ec
-
-+/* Macronix */
-+#define MX29LV160B 0x2249 /* MX29LV160 Bottom-boot chip */
-+#define MX29LV160T 0x22C4 /* MX29LV160 Top-boot chip */
-+#define MX29LV320B 0x22A8 /* MX29LV320 Bottom-boot chip */
-+#define MX29LV320T 0x22A7 /* MX29LV320 Top-boot chip */
-+
- static int cfi_amdstd_read (struct mtd_info *, loff_t, size_t, size_t *, u_char *);
- static int cfi_amdstd_write_words(struct mtd_info *, loff_t, size_t, size_t *, const u_char *);
- static int cfi_amdstd_write_buffers(struct mtd_info *, loff_t, size_t, size_t *, const u_char *);
-@@ -221,6 +228,41 @@
- mtd->flags |= MTD_POWERUP_LOCK;
- }
-
-+#ifdef CONFIG_MTD_CFI_FIXUP_MACRONIX_BOOTLOC
-+/*
-+ * Some Macronix chips has no/bad bootblock information in the CFI table
-+ */
-+static void fixup_macronix_bootloc(struct mtd_info *mtd, void* param)
-+{
-+ struct map_info *map = mtd->priv;
-+ struct cfi_private *cfi = map->fldrv_priv;
-+ struct cfi_pri_amdstd *extp = cfi->cmdset_priv;
-+ __u8 t;
-+
-+ switch (cfi->id) {
-+ /* TODO: put affected chip ids here */
-+ case MX29LV160B:
-+ case MX29LV320B:
-+ t = 2; /* Bottom boot */
-+ break;
-+ case MX29LV160T:
-+ case MX29LV320T:
-+ t = 3; /* Top boot */
-+ break;
-+ default:
-+ return;
-+ }
-+
-+ if (extp->TopBottom == t)
-+ /* boot location detected by the CFI layer is correct */
-+ return;
-+
-+ extp->TopBottom = t;
-+ printk("%s: Macronix chip detected, id:0x%04X, boot location forced "
-+ "to %s\n", map->name, cfi->id, (t == 2) ? "bottom" : "top");
-+}
-+#endif /* CONFIG_MTD_CFI_FIXUP_MACRONIX_BOOTLOC */
-+
- static struct cfi_fixup cfi_fixup_table[] = {
- { CFI_MFR_ATMEL, CFI_ID_ANY, fixup_convert_atmel_pri, NULL },
- #ifdef AMD_BOOTLOC_BUG
-@@ -252,6 +294,9 @@
- */
- { CFI_MFR_ANY, CFI_ID_ANY, fixup_use_erase_chip, NULL },
- { CFI_MFR_ATMEL, AT49BV6416, fixup_use_atmel_lock, NULL },
-+#ifdef CONFIG_MTD_CFI_FIXUP_MACRONIX_BOOTLOC
-+ { MANUFACTURER_MACRONIX, CFI_ID_ANY, fixup_macronix_bootloc, NULL, },
-+#endif
- { 0, 0, NULL, NULL }
- };
-
---- a/drivers/mtd/chips/Kconfig
-+++ b/drivers/mtd/chips/Kconfig
-@@ -196,6 +196,14 @@
- provides support for one of those command sets, used on chips
- including the AMD Am29LV320.
-
-+config MTD_CFI_FIXUP_MACRONIX_BOOTLOC
-+ bool "Fix boot-block location for Macronix flash chips"
-+ depends on MTD_CFI_AMDSTD
-+ help
-+ Some Macronix flash chips have no/wrong boot-block location in the
-+ CFI table, and the driver may detect the type incorrectly. Select
-+ this if your board has such chip.
-+
- config MTD_CFI_STAA
- tristate "Support for ST (Advanced Architecture) flash chips"
- depends on MTD_GEN_PROBE
diff --git a/target/linux/adm5120/patches/102-jedec_pmc_39lvxxx_chips.patch b/target/linux/adm5120/patches/102-jedec_pmc_39lvxxx_chips.patch
deleted file mode 100644
index 7f352f67ec..0000000000
--- a/target/linux/adm5120/patches/102-jedec_pmc_39lvxxx_chips.patch
+++ /dev/null
@@ -1,68 +0,0 @@
---- a/drivers/mtd/chips/jedec_probe.c
-+++ b/drivers/mtd/chips/jedec_probe.c
-@@ -121,6 +121,10 @@
- #define UPD29F064115 0x221C
-
- /* PMC */
-+#define PM39LV512 0x001B
-+#define PM39LV010 0x001C
-+#define PM39LV020 0x003D
-+#define PM39LV040 0x003E
- #define PM49FL002 0x006D
- #define PM49FL004 0x006E
- #define PM49FL008 0x006A
-@@ -1170,6 +1174,54 @@
- ERASEINFO(0x02000,2),
- ERASEINFO(0x04000,1),
- }
-+ }, {
-+ .mfr_id = MANUFACTURER_PMC,
-+ .dev_id = PM39LV512,
-+ .name = "PMC Pm39LV512",
-+ .devtypes = CFI_DEVICETYPE_X8,
-+ .uaddr = MTD_UADDR_0x0555_0x02AA,
-+ .dev_size = SIZE_64KiB,
-+ .cmd_set = P_ID_AMD_STD,
-+ .nr_regions = 1,
-+ .regions = {
-+ ERASEINFO(0x01000,16),
-+ }
-+ }, {
-+ .mfr_id = MANUFACTURER_PMC,
-+ .dev_id = PM39LV010,
-+ .name = "PMC Pm39LV010",
-+ .devtypes = CFI_DEVICETYPE_X8,
-+ .uaddr = MTD_UADDR_0x0555_0x02AA,
-+ .dev_size = SIZE_128KiB,
-+ .cmd_set = P_ID_AMD_STD,
-+ .nr_regions = 1,
-+ .regions = {
-+ ERASEINFO(0x01000,32),
-+ }
-+ }, {
-+ .mfr_id = MANUFACTURER_PMC,
-+ .dev_id = PM39LV020,
-+ .name = "PMC Pm39LV020",
-+ .devtypes = CFI_DEVICETYPE_X8,
-+ .uaddr = MTD_UADDR_0x0555_0x02AA,
-+ .dev_size = SIZE_256KiB,
-+ .cmd_set = P_ID_AMD_STD,
-+ .nr_regions = 1,
-+ .regions = {
-+ ERASEINFO(0x01000,64),
-+ }
-+ }, {
-+ .mfr_id = MANUFACTURER_PMC,
-+ .dev_id = PM39LV040,
-+ .name = "PMC Pm39LV040",
-+ .devtypes = CFI_DEVICETYPE_X8,
-+ .uaddr = MTD_UADDR_0x0555_0x02AA,
-+ .dev_size = SIZE_512KiB,
-+ .cmd_set = P_ID_AMD_STD,
-+ .nr_regions = 1,
-+ .regions = {
-+ ERASEINFO(0x01000,128),
-+ }
- }, {
- .mfr_id = MANUFACTURER_PMC,
- .dev_id = PM49FL002,
diff --git a/target/linux/adm5120/patches/103-mtd_trxsplit.patch b/target/linux/adm5120/patches/103-mtd_trxsplit.patch
deleted file mode 100644
index 267293aa56..0000000000
--- a/target/linux/adm5120/patches/103-mtd_trxsplit.patch
+++ /dev/null
@@ -1,24 +0,0 @@
---- a/drivers/mtd/Kconfig
-+++ b/drivers/mtd/Kconfig
-@@ -57,6 +57,11 @@
- depends on MTD_PARTITIONS
- default y
-
-+config MTD_TRXSPLIT
-+ bool "Automatically find and split TRX partitions"
-+ depends on MTD_PARTITIONS
-+ default n
-+
- config MTD_REDBOOT_PARTS
- tristate "RedBoot partition table parsing"
- depends on MTD_PARTITIONS
---- a/drivers/mtd/Makefile
-+++ b/drivers/mtd/Makefile
-@@ -8,6 +8,7 @@
- mtd-$(CONFIG_MTD_PARTITIONS) += mtdpart.o
-
- obj-$(CONFIG_MTD_CONCAT) += mtdconcat.o
-+obj-$(CONFIG_MTD_TRXSPLIT) += trxsplit.o
- obj-$(CONFIG_MTD_REDBOOT_PARTS) += redboot.o
- obj-$(CONFIG_MTD_CMDLINE_PARTS) += cmdlinepart.o
- obj-$(CONFIG_MTD_AFS_PARTS) += afs.o
diff --git a/target/linux/adm5120/patches/120-rb153_cf_driver.patch b/target/linux/adm5120/patches/120-rb153_cf_driver.patch
deleted file mode 100644
index 6f371e340b..0000000000
--- a/target/linux/adm5120/patches/120-rb153_cf_driver.patch
+++ /dev/null
@@ -1,26 +0,0 @@
---- a/drivers/ata/Makefile
-+++ b/drivers/ata/Makefile
-@@ -71,6 +71,7 @@
- obj-$(CONFIG_PATA_PLATFORM) += pata_platform.o
- obj-$(CONFIG_PATA_OF_PLATFORM) += pata_of_platform.o
- obj-$(CONFIG_PATA_ICSIDE) += pata_icside.o
-+obj-$(CONFIG_PATA_RB153_CF) += pata_rb153_cf.o
- # Should be last but two libata driver
- obj-$(CONFIG_PATA_ACPI) += pata_acpi.o
- # Should be last but one libata driver
---- a/drivers/ata/Kconfig
-+++ b/drivers/ata/Kconfig
-@@ -679,4 +679,13 @@
-
- If unsure, say N.
-
-+config PATA_RB153_CF
-+ tristate "RouterBOARD 153 Compact Flash support"
-+ depends on MIPS_ADM5120
-+ help
-+ This option enables support for a Compact Flash connected on
-+ the RouterBOARD 153.
-+
-+ If unsure, say N.
-+
- endif # ATA
diff --git a/target/linux/adm5120/patches/140-cmdline_hack.patch b/target/linux/adm5120/patches/140-cmdline_hack.patch
deleted file mode 100644
index 1ced3f62dd..0000000000
--- a/target/linux/adm5120/patches/140-cmdline_hack.patch
+++ /dev/null
@@ -1,15 +0,0 @@
---- a/arch/mips/kernel/head.S
-+++ b/arch/mips/kernel/head.S
-@@ -126,7 +126,12 @@
- /*
- * Reserved space for exception handlers.
- * Necessary for machines which link their kernels at KSEG0.
-+ * Use as temporary storage for the kernel command line, so that it
-+ * can be updated easily without having to relink the kernel.
- */
-+
-+EXPORT(_image_cmdline)
-+ .ascii "CMDLINE:"
- .fill 0x400
- #endif
-
diff --git a/target/linux/adm5120/patches/200-amba_pl010_hacks.patch b/target/linux/adm5120/patches/200-amba_pl010_hacks.patch
deleted file mode 100644
index 39c1dea24c..0000000000
--- a/target/linux/adm5120/patches/200-amba_pl010_hacks.patch
+++ /dev/null
@@ -1,378 +0,0 @@
---- a/drivers/serial/amba-pl010.c
-+++ b/drivers/serial/amba-pl010.c
-@@ -52,11 +52,10 @@
-
- #include <asm/io.h>
-
--#define UART_NR 8
--
- #define SERIAL_AMBA_MAJOR 204
- #define SERIAL_AMBA_MINOR 16
--#define SERIAL_AMBA_NR UART_NR
-+#define SERIAL_AMBA_NR CONFIG_SERIAL_AMBA_PL010_NUMPORTS
-+#define SERIAL_AMBA_NAME CONFIG_SERIAL_AMBA_PL010_PORTNAME
-
- #define AMBA_ISR_PASS_LIMIT 256
-
-@@ -82,9 +81,9 @@
- struct uart_amba_port *uap = (struct uart_amba_port *)port;
- unsigned int cr;
-
-- cr = readb(uap->port.membase + UART010_CR);
-+ cr = __raw_readl(uap->port.membase + UART010_CR);
- cr &= ~UART010_CR_TIE;
-- writel(cr, uap->port.membase + UART010_CR);
-+ __raw_writel(cr, uap->port.membase + UART010_CR);
- }
-
- static void pl010_start_tx(struct uart_port *port)
-@@ -92,9 +91,9 @@
- struct uart_amba_port *uap = (struct uart_amba_port *)port;
- unsigned int cr;
-
-- cr = readb(uap->port.membase + UART010_CR);
-+ cr = __raw_readl(uap->port.membase + UART010_CR);
- cr |= UART010_CR_TIE;
-- writel(cr, uap->port.membase + UART010_CR);
-+ __raw_writel(cr, uap->port.membase + UART010_CR);
- }
-
- static void pl010_stop_rx(struct uart_port *port)
-@@ -102,9 +101,9 @@
- struct uart_amba_port *uap = (struct uart_amba_port *)port;
- unsigned int cr;
-
-- cr = readb(uap->port.membase + UART010_CR);
-+ cr = __raw_readl(uap->port.membase + UART010_CR);
- cr &= ~(UART010_CR_RIE | UART010_CR_RTIE);
-- writel(cr, uap->port.membase + UART010_CR);
-+ __raw_writel(cr, uap->port.membase + UART010_CR);
- }
-
- static void pl010_enable_ms(struct uart_port *port)
-@@ -112,9 +111,9 @@
- struct uart_amba_port *uap = (struct uart_amba_port *)port;
- unsigned int cr;
-
-- cr = readb(uap->port.membase + UART010_CR);
-+ cr = __raw_readl(uap->port.membase + UART010_CR);
- cr |= UART010_CR_MSIE;
-- writel(cr, uap->port.membase + UART010_CR);
-+ __raw_writel(cr, uap->port.membase + UART010_CR);
- }
-
- static void pl010_rx_chars(struct uart_amba_port *uap)
-@@ -122,9 +121,9 @@
- struct tty_struct *tty = uap->port.info->tty;
- unsigned int status, ch, flag, rsr, max_count = 256;
-
-- status = readb(uap->port.membase + UART01x_FR);
-+ status = __raw_readl(uap->port.membase + UART01x_FR);
- while (UART_RX_DATA(status) && max_count--) {
-- ch = readb(uap->port.membase + UART01x_DR);
-+ ch = __raw_readl(uap->port.membase + UART01x_DR);
- flag = TTY_NORMAL;
-
- uap->port.icount.rx++;
-@@ -133,9 +132,9 @@
- * Note that the error handling code is
- * out of the main execution path
- */
-- rsr = readb(uap->port.membase + UART01x_RSR) | UART_DUMMY_RSR_RX;
-+ rsr = __raw_readl(uap->port.membase + UART01x_RSR) | UART_DUMMY_RSR_RX;
- if (unlikely(rsr & UART01x_RSR_ANY)) {
-- writel(0, uap->port.membase + UART01x_ECR);
-+ __raw_writel(0, uap->port.membase + UART01x_ECR);
-
- if (rsr & UART01x_RSR_BE) {
- rsr &= ~(UART01x_RSR_FE | UART01x_RSR_PE);
-@@ -165,7 +164,7 @@
- uart_insert_char(&uap->port, rsr, UART01x_RSR_OE, ch, flag);
-
- ignore_char:
-- status = readb(uap->port.membase + UART01x_FR);
-+ status = __raw_readl(uap->port.membase + UART01x_FR);
- }
- spin_unlock(&uap->port.lock);
- tty_flip_buffer_push(tty);
-@@ -178,7 +177,7 @@
- int count;
-
- if (uap->port.x_char) {
-- writel(uap->port.x_char, uap->port.membase + UART01x_DR);
-+ __raw_writel(uap->port.x_char, uap->port.membase + UART01x_DR);
- uap->port.icount.tx++;
- uap->port.x_char = 0;
- return;
-@@ -190,7 +189,7 @@
-
- count = uap->port.fifosize >> 1;
- do {
-- writel(xmit->buf[xmit->tail], uap->port.membase + UART01x_DR);
-+ __raw_writel(xmit->buf[xmit->tail], uap->port.membase + UART01x_DR);
- xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
- uap->port.icount.tx++;
- if (uart_circ_empty(xmit))
-@@ -208,9 +207,9 @@
- {
- unsigned int status, delta;
-
-- writel(0, uap->port.membase + UART010_ICR);
-+ __raw_writel(0, uap->port.membase + UART010_ICR);
-
-- status = readb(uap->port.membase + UART01x_FR) & UART01x_FR_MODEM_ANY;
-+ status = __raw_readl(uap->port.membase + UART01x_FR) & UART01x_FR_MODEM_ANY;
-
- delta = status ^ uap->old_status;
- uap->old_status = status;
-@@ -238,7 +237,7 @@
-
- spin_lock(&uap->port.lock);
-
-- status = readb(uap->port.membase + UART010_IIR);
-+ status = __raw_readl(uap->port.membase + UART010_IIR);
- if (status) {
- do {
- if (status & (UART010_IIR_RTIS | UART010_IIR_RIS))
-@@ -251,7 +250,7 @@
- if (pass_counter-- == 0)
- break;
-
-- status = readb(uap->port.membase + UART010_IIR);
-+ status = __raw_readl(uap->port.membase + UART010_IIR);
- } while (status & (UART010_IIR_RTIS | UART010_IIR_RIS |
- UART010_IIR_TIS));
- handled = 1;
-@@ -265,7 +264,7 @@
- static unsigned int pl010_tx_empty(struct uart_port *port)
- {
- struct uart_amba_port *uap = (struct uart_amba_port *)port;
-- unsigned int status = readb(uap->port.membase + UART01x_FR);
-+ unsigned int status = __raw_readl(uap->port.membase + UART01x_FR);
- return status & UART01x_FR_BUSY ? 0 : TIOCSER_TEMT;
- }
-
-@@ -275,7 +274,7 @@
- unsigned int result = 0;
- unsigned int status;
-
-- status = readb(uap->port.membase + UART01x_FR);
-+ status = __raw_readl(uap->port.membase + UART01x_FR);
- if (status & UART01x_FR_DCD)
- result |= TIOCM_CAR;
- if (status & UART01x_FR_DSR)
-@@ -301,12 +300,12 @@
- unsigned int lcr_h;
-
- spin_lock_irqsave(&uap->port.lock, flags);
-- lcr_h = readb(uap->port.membase + UART010_LCRH);
-+ lcr_h = __raw_readl(uap->port.membase + UART010_LCRH);
- if (break_state == -1)
- lcr_h |= UART01x_LCRH_BRK;
- else
- lcr_h &= ~UART01x_LCRH_BRK;
-- writel(lcr_h, uap->port.membase + UART010_LCRH);
-+ __raw_writel(lcr_h, uap->port.membase + UART010_LCRH);
- spin_unlock_irqrestore(&uap->port.lock, flags);
- }
-
-@@ -334,12 +333,12 @@
- /*
- * initialise the old status of the modem signals
- */
-- uap->old_status = readb(uap->port.membase + UART01x_FR) & UART01x_FR_MODEM_ANY;
-+ uap->old_status = __raw_readl(uap->port.membase + UART01x_FR) & UART01x_FR_MODEM_ANY;
-
- /*
- * Finally, enable interrupts
- */
-- writel(UART01x_CR_UARTEN | UART010_CR_RIE | UART010_CR_RTIE,
-+ __raw_writel(UART01x_CR_UARTEN | UART010_CR_RIE | UART010_CR_RTIE,
- uap->port.membase + UART010_CR);
-
- return 0;
-@@ -362,10 +361,10 @@
- /*
- * disable all interrupts, disable the port
- */
-- writel(0, uap->port.membase + UART010_CR);
-+ __raw_writel(0, uap->port.membase + UART010_CR);
-
- /* disable break condition and fifos */
-- writel(readb(uap->port.membase + UART010_LCRH) &
-+ __raw_writel(__raw_readl(uap->port.membase + UART010_LCRH) &
- ~(UART01x_LCRH_BRK | UART01x_LCRH_FEN),
- uap->port.membase + UART010_LCRH);
-
-@@ -387,7 +386,7 @@
- /*
- * Ask the core to calculate the divisor for us.
- */
-- baud = uart_get_baud_rate(port, termios, old, 0, uap->port.uartclk/16);
-+ baud = uart_get_baud_rate(port, termios, old, 0, uap->port.uartclk/16);
- quot = uart_get_divisor(port, baud);
-
- switch (termios->c_cflag & CSIZE) {
-@@ -450,25 +449,25 @@
- uap->port.ignore_status_mask |= UART_DUMMY_RSR_RX;
-
- /* first, disable everything */
-- old_cr = readb(uap->port.membase + UART010_CR) & ~UART010_CR_MSIE;
-+ old_cr = __raw_readl(uap->port.membase + UART010_CR) & ~UART010_CR_MSIE;
-
- if (UART_ENABLE_MS(port, termios->c_cflag))
- old_cr |= UART010_CR_MSIE;
-
-- writel(0, uap->port.membase + UART010_CR);
-+ __raw_writel(0, uap->port.membase + UART010_CR);
-
- /* Set baud rate */
- quot -= 1;
-- writel((quot & 0xf00) >> 8, uap->port.membase + UART010_LCRM);
-- writel(quot & 0xff, uap->port.membase + UART010_LCRL);
-+ __raw_writel((quot & 0xf00) >> 8, uap->port.membase + UART010_LCRM);
-+ __raw_writel(quot & 0xff, uap->port.membase + UART010_LCRL);
-
- /*
- * ----------v----------v----------v----------v-----
- * NOTE: MUST BE WRITTEN AFTER UARTLCR_M & UARTLCR_L
- * ----------^----------^----------^----------^-----
- */
-- writel(lcr_h, uap->port.membase + UART010_LCRH);
-- writel(old_cr, uap->port.membase + UART010_CR);
-+ __raw_writel(lcr_h, uap->port.membase + UART010_LCRH);
-+ __raw_writel(old_cr, uap->port.membase + UART010_CR);
-
- spin_unlock_irqrestore(&uap->port.lock, flags);
- }
-@@ -540,7 +539,7 @@
- .verify_port = pl010_verify_port,
- };
-
--static struct uart_amba_port *amba_ports[UART_NR];
-+static struct uart_amba_port *amba_ports[SERIAL_AMBA_NR];
-
- #ifdef CONFIG_SERIAL_AMBA_PL010_CONSOLE
-
-@@ -550,10 +549,10 @@
- unsigned int status;
-
- do {
-- status = readb(uap->port.membase + UART01x_FR);
-+ status = __raw_readl(uap->port.membase + UART01x_FR);
- barrier();
- } while (!UART_TX_READY(status));
-- writel(ch, uap->port.membase + UART01x_DR);
-+ __raw_writel(ch, uap->port.membase + UART01x_DR);
- }
-
- static void
-@@ -567,8 +566,8 @@
- /*
- * First save the CR then disable the interrupts
- */
-- old_cr = readb(uap->port.membase + UART010_CR);
-- writel(UART01x_CR_UARTEN, uap->port.membase + UART010_CR);
-+ old_cr = __raw_readl(uap->port.membase + UART010_CR);
-+ __raw_writel(UART01x_CR_UARTEN, uap->port.membase + UART010_CR);
-
- uart_console_write(&uap->port, s, count, pl010_console_putchar);
-
-@@ -577,10 +576,10 @@
- * and restore the TCR
- */
- do {
-- status = readb(uap->port.membase + UART01x_FR);
-+ status = __raw_readl(uap->port.membase + UART01x_FR);
- barrier();
- } while (status & UART01x_FR_BUSY);
-- writel(old_cr, uap->port.membase + UART010_CR);
-+ __raw_writel(old_cr, uap->port.membase + UART010_CR);
-
- clk_disable(uap->clk);
- }
-@@ -589,9 +588,9 @@
- pl010_console_get_options(struct uart_amba_port *uap, int *baud,
- int *parity, int *bits)
- {
-- if (readb(uap->port.membase + UART010_CR) & UART01x_CR_UARTEN) {
-+ if (__raw_readl(uap->port.membase + UART010_CR) & UART01x_CR_UARTEN) {
- unsigned int lcr_h, quot;
-- lcr_h = readb(uap->port.membase + UART010_LCRH);
-+ lcr_h = __raw_readl(uap->port.membase + UART010_LCRH);
-
- *parity = 'n';
- if (lcr_h & UART01x_LCRH_PEN) {
-@@ -606,8 +605,8 @@
- else
- *bits = 8;
-
-- quot = readb(uap->port.membase + UART010_LCRL) |
-- readb(uap->port.membase + UART010_LCRM) << 8;
-+ quot = __raw_readl(uap->port.membase + UART010_LCRL) |
-+ __raw_readl(uap->port.membase + UART010_LCRM) << 8;
- *baud = uap->port.uartclk / (16 * (quot + 1));
- }
- }
-@@ -625,7 +624,7 @@
- * if so, search for the first available port that does have
- * console support.
- */
-- if (co->index >= UART_NR)
-+ if (co->index >= SERIAL_AMBA_NR)
- co->index = 0;
- uap = amba_ports[co->index];
- if (!uap)
-@@ -643,7 +642,7 @@
-
- static struct uart_driver amba_reg;
- static struct console amba_console = {
-- .name = "ttyAM",
-+ .name = SERIAL_AMBA_NAME,
- .write = pl010_console_write,
- .device = uart_console_device,
- .setup = pl010_console_setup,
-@@ -659,11 +658,11 @@
-
- static struct uart_driver amba_reg = {
- .owner = THIS_MODULE,
-- .driver_name = "ttyAM",
-- .dev_name = "ttyAM",
-+ .driver_name = SERIAL_AMBA_NAME,
-+ .dev_name = SERIAL_AMBA_NAME,
- .major = SERIAL_AMBA_MAJOR,
- .minor = SERIAL_AMBA_MINOR,
-- .nr = UART_NR,
-+ .nr = SERIAL_AMBA_NR,
- .cons = AMBA_CONSOLE,
- };
-
---- a/drivers/serial/Kconfig
-+++ b/drivers/serial/Kconfig
-@@ -287,10 +287,25 @@
- help
- This selects the ARM(R) AMBA(R) PrimeCell PL010 UART. If you have
- an Integrator/AP or Integrator/PP2 platform, or if you have a
-- Cirrus Logic EP93xx CPU, say Y or M here.
-+ Cirrus Logic EP93xx CPU or an Infineon ADM5120 SOC, say Y or M here.
-
- If unsure, say N.
-
-+config SERIAL_AMBA_PL010_NUMPORTS
-+ int "Maximum number of AMBA PL010 serial ports"
-+ depends on SERIAL_AMBA_PL010
-+ default "8"
-+ ---help---
-+ Set this to the number of serial ports you want the AMBA PL010 driver
-+ to support.
-+
-+config SERIAL_AMBA_PL010_PORTNAME
-+ string "Name of the AMBA PL010 serial ports"
-+ depends on SERIAL_AMBA_PL010
-+ default "ttyAM"
-+ ---help---
-+ ::: To be written :::
-+
- config SERIAL_AMBA_PL010_CONSOLE
- bool "Support for console on AMBA serial port"
- depends on SERIAL_AMBA_PL010=y
diff --git a/target/linux/adm5120/patches/201-amba_bus_hacks.patch b/target/linux/adm5120/patches/201-amba_bus_hacks.patch
deleted file mode 100644
index 299f216523..0000000000
--- a/target/linux/adm5120/patches/201-amba_bus_hacks.patch
+++ /dev/null
@@ -1,13 +0,0 @@
---- a/drivers/amba/bus.c
-+++ b/drivers/amba/bus.c
-@@ -17,6 +17,10 @@
- #include <asm/io.h>
- #include <asm/sizes.h>
-
-+#ifndef NO_IRQ
-+#define NO_IRQ (-1)
-+#endif
-+
- #define to_amba_device(d) container_of(d, struct amba_device, dev)
- #define to_amba_driver(d) container_of(d, struct amba_driver, drv)
-
diff --git a/target/linux/adm5120/patches/202-pci_disable_common_quirks.patch b/target/linux/adm5120/patches/202-pci_disable_common_quirks.patch
deleted file mode 100644
index 25149885a5..0000000000
--- a/target/linux/adm5120/patches/202-pci_disable_common_quirks.patch
+++ /dev/null
@@ -1,46 +0,0 @@
---- a/drivers/pci/Kconfig
-+++ b/drivers/pci/Kconfig
-@@ -42,6 +42,12 @@
-
- When in doubt, say N.
-
-+config PCI_DISABLE_COMMON_QUIRKS
-+ bool "PCI disable common quirks"
-+ depends on PCI
-+ help
-+ If you don't know what to do here, say N.
-+
- config HT_IRQ
- bool "Interrupts on hypertransport devices"
- default y
---- a/drivers/pci/quirks.c
-+++ b/drivers/pci/quirks.c
-@@ -24,6 +24,7 @@
- #include <linux/kallsyms.h>
- #include "pci.h"
-
-+#ifndef CONFIG_PCI_DISABLE_COMMON_QUIRKS
- /* The Mellanox Tavor device gives false positive parity errors
- * Mark this device with a broken_parity_status, to allow
- * PCI scanning code to "skip" this now blacklisted device.
-@@ -1495,6 +1496,7 @@
- }
- }
- DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NCR, PCI_DEVICE_ID_NCR_53C810, fixup_rev1_53c810);
-+#endif /* !CONFIG_PCI_DISABLE_COMMON_QUIRKS */
-
- static void pci_do_fixups(struct pci_dev *dev, struct pci_fixup *f, struct pci_fixup *end)
- {
-@@ -1562,6 +1564,7 @@
- }
- EXPORT_SYMBOL(pci_fixup_device);
-
-+#ifndef CONFIG_PCI_DISABLE_COMMON_QUIRKS
- /* Enable 1k I/O space granularity on the Intel P64H2 */
- static void __devinit quirk_p64h2_1k_io(struct pci_dev *dev)
- {
-@@ -1875,3 +1878,4 @@
- quirk_msi_intx_disable_bug);
-
- #endif /* CONFIG_PCI_MSI */
-+#endif /* !CONFIG_PCI_DISABLE_COMMON_QUIRKS */
diff --git a/target/linux/adm5120/patches/203-gpio_leds_brightness.patch b/target/linux/adm5120/patches/203-gpio_leds_brightness.patch
deleted file mode 100644
index 06394da295..0000000000
--- a/target/linux/adm5120/patches/203-gpio_leds_brightness.patch
+++ /dev/null
@@ -1,27 +0,0 @@
---- a/drivers/leds/leds-gpio.c
-+++ b/drivers/leds/leds-gpio.c
-@@ -41,13 +41,17 @@
- container_of(led_cdev, struct gpio_led_data, cdev);
- int level;
-
-- if (value == LED_OFF)
-- level = 0;
-- else
-- level = 1;
--
-- if (led_dat->active_low)
-- level = !level;
-+ switch (value) {
-+ case LED_OFF:
-+ level = led_dat->active_low ? 1 : 0;
-+ break;
-+ case LED_FULL:
-+ level = led_dat->active_low ? 0 : 1;
-+ break;
-+ default:
-+ level = value;
-+ break;
-+ }
-
- /* Setting GPIOs with I2C/etc requires a task context, and we don't
- * seem to have a reliable way to know if we're already in one; so
diff --git a/target/linux/adm5120/patches/310-adm5120_wdt.patch b/target/linux/adm5120/patches/310-adm5120_wdt.patch
deleted file mode 100644
index 78eb62862d..0000000000
--- a/target/linux/adm5120/patches/310-adm5120_wdt.patch
+++ /dev/null
@@ -1,31 +0,0 @@
---- a/drivers/watchdog/Kconfig
-+++ b/drivers/watchdog/Kconfig
-@@ -619,6 +619,18 @@
-
- # MIPS Architecture
-
-+config ADM5120_WDT
-+ tristate "Infineon ADM5120 SoC hardware watchdog"
-+ depends on WATCHDOG && MIPS_ADM5120
-+ help
-+ This is a driver for hardware watchdog integrated in Infineon
-+ ADM5120 SoC. This watchdog simply watches your kernel to make sure
-+ it doesn't freeze, and if it does, it reboots your computer after a
-+ certain amount of time.
-+
-+ To compile this driver as a module, choose M here: the module will be
-+ called adm5120_wdt.
-+
- config INDYDOG
- tristate "Indy/I2 Hardware Watchdog"
- depends on SGI_HAS_INDYDOG
---- a/drivers/watchdog/Makefile
-+++ b/drivers/watchdog/Makefile
-@@ -90,6 +90,7 @@
- # M68KNOMMU Architecture
-
- # MIPS Architecture
-+obj-$(CONFIG_ADM5120_WDT) += adm5120_wdt.o
- obj-$(CONFIG_INDYDOG) += indydog.o
- obj-$(CONFIG_WDT_MTX1) += mtx-1_wdt.o
- obj-$(CONFIG_WDT_RM9K_GPI) += rm9k_wdt.o