aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ramips/patches-4.3/0029-phy-usb-add-ralink-phy.patch
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/ramips/patches-4.3/0029-phy-usb-add-ralink-phy.patch')
-rw-r--r--target/linux/ramips/patches-4.3/0029-phy-usb-add-ralink-phy.patch196
1 files changed, 112 insertions, 84 deletions
diff --git a/target/linux/ramips/patches-4.3/0029-phy-usb-add-ralink-phy.patch b/target/linux/ramips/patches-4.3/0029-phy-usb-add-ralink-phy.patch
index 8534da3439..f511b8838e 100644
--- a/target/linux/ramips/patches-4.3/0029-phy-usb-add-ralink-phy.patch
+++ b/target/linux/ramips/patches-4.3/0029-phy-usb-add-ralink-phy.patch
@@ -1,19 +1,44 @@
-From a10fc0cb650be725157eca50e2ceb34efc281ac2 Mon Sep 17 00:00:00 2001
+From b00b5eafa7e8d059bd0ce844e66f648916953270 Mon Sep 17 00:00:00 2001
From: John Crispin <blogic@openwrt.org>
-Date: Mon, 22 Apr 2013 23:20:03 +0200
-Subject: [PATCH 29/53] phy: usb: add ralink phy
+Date: Sun, 3 Jan 2016 19:11:22 +0100
+Subject: [PATCH 2/3] phy: ralink-usb: add driver for Mediatek/Ralink
+
+Add a driver to setup the USB phy on Mediatek/Ralink SoCs.
+The driver is trivial and only sets up power and host mode.
Signed-off-by: John Crispin <blogic@openwrt.org>
---
- drivers/phy/Kconfig | 5 ++
- drivers/phy/Makefile | 1 +
- drivers/phy/phy-ralink-usb.c | 175 ++++++++++++++++++++++++++++++++++++++++++
- 3 files changed, 181 insertions(+)
+ .../devicetree/bindings/phy/ralink-usb-phy.txt | 17 ++
+ drivers/phy/Kconfig | 8 +
+ drivers/phy/Makefile | 1 +
+ drivers/phy/phy-ralink-usb.c | 171 ++++++++++++++++++++
+ 4 files changed, 197 insertions(+)
+ create mode 100644 Documentation/devicetree/bindings/phy/ralink-usb-phy.txt
create mode 100644 drivers/phy/phy-ralink-usb.c
+--- /dev/null
++++ b/Documentation/devicetree/bindings/phy/ralink-usb-phy.txt
+@@ -0,0 +1,17 @@
++Mediatek/Ralink USB PHY
++
++Required properties:
++ - compatible: ralink,rt3352-usbphy or mediatek,mt7620-usbphy
++ - #phy-cells: should be 0
++ - resets: the two reset controllers for host and device
++ - reset-names: the names of the 2 reset controllers
++
++Example:
++
++usbphy: phy {
++ compatible = "mediatek,mt7620-usbphy";
++ #phy-cells = <0>;
++
++ resets = <&rstctrl 22 &rstctrl 25>;
++ reset-names = "host", "device";
++};
--- a/drivers/phy/Kconfig
+++ b/drivers/phy/Kconfig
-@@ -331,6 +331,11 @@ config PHY_XGENE
+@@ -331,6 +331,14 @@
help
This option enables support for APM X-Gene SoC multi-purpose PHY.
@@ -21,13 +46,16 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
+ tristate "Ralink USB PHY driver"
+ select GENERIC_PHY
+ depends on RALINK
++ help
++ This option enables support for the Ralink USB PHY found inside
++ RT3352 and MT7620.
+
config PHY_STIH407_USB
tristate "STMicroelectronics USB2 picoPHY driver for STiH407 family"
depends on RESET_CONTROLLER
--- a/drivers/phy/Makefile
+++ b/drivers/phy/Makefile
-@@ -46,3 +46,4 @@ obj-$(CONFIG_PHY_QCOM_UFS) += phy-qcom-
+@@ -46,3 +46,4 @@
obj-$(CONFIG_PHY_TUSB1210) += phy-tusb1210.o
obj-$(CONFIG_PHY_BRCMSTB_SATA) += phy-brcmstb-sata.o
obj-$(CONFIG_PHY_PISTACHIO_USB) += phy-pistachio-usb.o
@@ -38,7 +66,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
+/*
+ * Allwinner ralink USB phy driver
+ *
-+ * Copyright (C) 2014 John Crispin <blogic@openwrt.org>
++ * Copyright (C) 2016 John Crispin <blogic@openwrt.org>
+ *
+ * Based on code from
+ * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
@@ -83,94 +111,76 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
+#define USB_PHY_UTMI_8B60M BIT(1)
+#define UDEV_WAKEUP BIT(0)
+
-+static atomic_t usb_pwr_ref = ATOMIC_INIT(0);
-+static struct reset_control *rstdev;
-+static struct reset_control *rsthost;
-+static u32 phy_clk;
-+static struct phy *rt_phy;
++struct ralink_usb_phy {
++ struct reset_control *rstdev;
++ struct reset_control *rsthost;
++ u32 clk;
++ struct phy *phy;
++};
+
-+static void usb_phy_enable(int state)
++static int ralink_usb_phy_power_on(struct phy *_phy)
+{
-+ if (state)
-+ rt_sysc_m32(0, phy_clk, RT_SYSC_REG_CLKCFG1);
++ struct ralink_usb_phy *phy = phy_get_drvdata(_phy);
++ u32 t;
++
++ /* enable the phy */
++ rt_sysc_m32(0, phy->clk, RT_SYSC_REG_CLKCFG1);
++
++ /* setup host mode */
++ rt_sysc_m32(0, RT_SYSCFG1_USB0_HOST_MODE, RT_SYSC_REG_SYSCFG1);
++
++ /* deassert the reset lines */
++ reset_control_deassert(phy->rsthost);
++ reset_control_deassert(phy->rstdev);
++
++ /*
++ * The SDK kernel had a delay of 100ms. however on device
++ * testing showed that 10ms is enough
++ */
++ mdelay(10);
++
++ /* print some status info */
++ t = rt_sysc_r32(RT_SYSC_REG_USB_PHY_CFG);
++ dev_info(&phy->phy->dev, "remote usb device wakeup %s\n",
++ (t & UDEV_WAKEUP) ? ("enabled") : ("disabled"));
++ if (t & USB_PHY_UTMI_8B60M)
++ dev_info(&phy->phy->dev, "UTMI 8bit 60MHz\n");
+ else
-+ rt_sysc_m32(phy_clk, 0, RT_SYSC_REG_CLKCFG1);
-+ mdelay(100);
-+}
-+
-+static int ralink_usb_phy_init(struct phy *_phy)
-+{
-+ return 0;
-+}
++ dev_info(&phy->phy->dev, "UTMI 16bit 30MHz\n");
+
-+static int ralink_usb_phy_exit(struct phy *_phy)
-+{
+ return 0;
+}
+
-+static int ralink_usb_phy_power_on(struct phy *_phy)
++static int ralink_usb_phy_power_off(struct phy *_phy)
+{
-+ if (atomic_inc_return(&usb_pwr_ref) == 1) {
-+ int host = 1;
-+ u32 t;
-+
-+ usb_phy_enable(1);
-+
-+ if (host) {
-+ rt_sysc_m32(0, RT_SYSCFG1_USB0_HOST_MODE, RT_SYSC_REG_SYSCFG1);
-+ if (!IS_ERR(rsthost))
-+ reset_control_deassert(rsthost);
-+ if (!IS_ERR(rstdev))
-+ reset_control_deassert(rstdev);
-+ } else {
-+ rt_sysc_m32(RT_SYSCFG1_USB0_HOST_MODE, 0, RT_SYSC_REG_SYSCFG1);
-+ if (!IS_ERR(rstdev))
-+ reset_control_deassert(rstdev);
-+ }
-+ mdelay(100);
-+
-+ t = rt_sysc_r32(RT_SYSC_REG_USB_PHY_CFG);
-+ dev_info(&_phy->dev, "remote usb device wakeup %s\n",
-+ (t & UDEV_WAKEUP) ? ("enabbled") : ("disabled"));
-+ if (t & USB_PHY_UTMI_8B60M)
-+ dev_info(&_phy->dev, "UTMI 8bit 60MHz\n");
-+ else
-+ dev_info(&_phy->dev, "UTMI 16bit 30MHz\n");
-+ }
++ struct ralink_usb_phy *phy = phy_get_drvdata(_phy);
+
-+ return 0;
-+}
++ /* disable the phy */
++ rt_sysc_m32(phy->clk, 0, RT_SYSC_REG_CLKCFG1);
+
-+static int ralink_usb_phy_power_off(struct phy *_phy)
-+{
-+ if (atomic_dec_return(&usb_pwr_ref) == 0) {
-+ usb_phy_enable(0);
-+ if (!IS_ERR(rstdev))
-+ reset_control_assert(rstdev);
-+ if (!IS_ERR(rsthost))
-+ reset_control_assert(rsthost);
-+ }
++ /* assert the reset lines */
++ reset_control_assert(phy->rstdev);
++ reset_control_assert(phy->rsthost);
+
+ return 0;
+}
+
+static struct phy_ops ralink_usb_phy_ops = {
-+ .init = ralink_usb_phy_init,
-+ .exit = ralink_usb_phy_exit,
+ .power_on = ralink_usb_phy_power_on,
+ .power_off = ralink_usb_phy_power_off,
+ .owner = THIS_MODULE,
+};
+
-+static struct phy *ralink_usb_phy_xlate(struct device *dev,
-+ struct of_phandle_args *args)
-+{
-+ return rt_phy;
-+}
-+
+static const struct of_device_id ralink_usb_phy_of_match[] = {
-+ { .compatible = "ralink,rt3xxx-usbphy", .data = (void *) (RT_CLKCFG1_UPHY1_CLK_EN | RT_CLKCFG1_UPHY0_CLK_EN) },
-+ { .compatible = "ralink,mt7620a-usbphy", .data = (void *) (MT7620_CLKCFG1_UPHY1_CLK_EN | MT7620_CLKCFG1_UPHY0_CLK_EN) },
++ {
++ .compatible = "ralink,rt3352-usbphy",
++ .data = (void *) (RT_CLKCFG1_UPHY1_CLK_EN |
++ RT_CLKCFG1_UPHY0_CLK_EN)
++ },
++ {
++ .compatible = "mediatek,mt7620-usbphy",
++ .data = (void *) (MT7620_CLKCFG1_UPHY1_CLK_EN |
++ MT7620_CLKCFG1_UPHY0_CLK_EN) },
+ { },
+};
+MODULE_DEVICE_TABLE(of, ralink_usb_phy_of_match);
@@ -180,20 +190,38 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
+ struct device *dev = &pdev->dev;
+ struct phy_provider *phy_provider;
+ const struct of_device_id *match;
++ struct ralink_usb_phy *phy;
++
++ phy = devm_kzalloc(dev, sizeof(*phy), GFP_KERNEL);
++ if (!phy)
++ return -ENOMEM;
+
+ match = of_match_device(ralink_usb_phy_of_match, &pdev->dev);
-+ phy_clk = (int) match->data;
++ if (!match)
++ return -ENODEV;
++
++ phy->clk = (int) match->data;
+
-+ rsthost = devm_reset_control_get(&pdev->dev, "host");
-+ rstdev = devm_reset_control_get(&pdev->dev, "device");
++ phy->rsthost = devm_reset_control_get(&pdev->dev, "host");
++ if (IS_ERR(phy->rsthost)) {
++ dev_err(dev, "host reset is missing\n");
++ return PTR_ERR(phy->rsthost);
++ }
++
++ phy->rstdev = devm_reset_control_get(&pdev->dev, "device");
++ if (IS_ERR(phy->rstdev)) {
++ dev_err(dev, "device reset is missing\n");
++ return PTR_ERR(phy->rstdev);
++ }
+
-+ rt_phy = devm_phy_create(dev, NULL, &ralink_usb_phy_ops);
-+ if (IS_ERR(rt_phy)) {
++ phy->phy = devm_phy_create(dev, NULL, &ralink_usb_phy_ops);
++ if (IS_ERR(phy->phy)) {
+ dev_err(dev, "failed to create PHY\n");
-+ return PTR_ERR(rt_phy);
++ return PTR_ERR(phy->phy);
+ }
++ phy_set_drvdata(phy->phy, phy);
+
-+ phy_provider = devm_of_phy_provider_register(dev, ralink_usb_phy_xlate);
++ phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
+
+ return PTR_ERR_OR_ZERO(phy_provider);
+}