aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/kirkwood/patches-3.18
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/kirkwood/patches-3.18')
-rw-r--r--target/linux/kirkwood/patches-3.18/100-find_active_root.patch61
-rw-r--r--target/linux/kirkwood/patches-3.18/110-ib62x0.patch20
-rw-r--r--target/linux/kirkwood/patches-3.18/120-iomega_ix2_200.patch13
-rw-r--r--target/linux/kirkwood/patches-3.18/130-iconnect.patch41
-rw-r--r--target/linux/kirkwood/patches-3.18/140-dockstar.patch32
-rw-r--r--target/linux/kirkwood/patches-3.18/150-pogoplug_e02.patch127
-rw-r--r--target/linux/kirkwood/patches-3.18/160-ea4500.patch200
-rw-r--r--target/linux/kirkwood/patches-3.18/170-ea3500.patch192
-rw-r--r--target/linux/kirkwood/patches-3.18/180-goflexhome.patch134
-rw-r--r--target/linux/kirkwood/patches-3.18/181-goflexnet.patch25
-rw-r--r--target/linux/kirkwood/patches-3.18/190-nsa310s.patch300
-rw-r--r--target/linux/kirkwood/patches-3.18/200-disable-tso.patch35
12 files changed, 0 insertions, 1180 deletions
diff --git a/target/linux/kirkwood/patches-3.18/100-find_active_root.patch b/target/linux/kirkwood/patches-3.18/100-find_active_root.patch
deleted file mode 100644
index e32b6089d1..0000000000
--- a/target/linux/kirkwood/patches-3.18/100-find_active_root.patch
+++ /dev/null
@@ -1,61 +0,0 @@
-The WRT1900AC among other Linksys routers uses a dual-firmware layout.
-Dynamically rename the active partition to "ubi".
-
-Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
-
---- a/drivers/mtd/ofpart.c
-+++ b/drivers/mtd/ofpart.c
-@@ -25,12 +25,15 @@ static bool node_has_compatible(struct d
- return of_get_property(pp, "compatible", NULL);
- }
-
-+static int mangled_rootblock;
-+
- static int parse_ofpart_partitions(struct mtd_info *master,
- struct mtd_partition **pparts,
- struct mtd_part_parser_data *data)
- {
- struct device_node *node;
- const char *partname;
-+ const char *owrtpart = "ubi";
- struct device_node *pp;
- int nr_parts, i;
-
-@@ -78,9 +81,15 @@ static int parse_ofpart_partitions(struc
- (*pparts)[i].offset = of_read_number(reg, a_cells);
- (*pparts)[i].size = of_read_number(reg + a_cells, s_cells);
-
-- partname = of_get_property(pp, "label", &len);
-- if (!partname)
-- partname = of_get_property(pp, "name", &len);
-+ if (mangled_rootblock && (i == mangled_rootblock)) {
-+ partname = owrtpart;
-+ } else {
-+ partname = of_get_property(pp, "label", &len);
-+
-+ if (!partname)
-+ partname = of_get_property(pp, "name", &len);
-+ }
-+
- (*pparts)[i].name = partname;
-
- if (of_get_property(pp, "read-only", &len))
-@@ -178,6 +187,18 @@ static int __init ofpart_parser_init(voi
- return 0;
- }
-
-+static int __init active_root(char *str)
-+{
-+ get_option(&str, &mangled_rootblock);
-+
-+ if (!mangled_rootblock)
-+ return 1;
-+
-+ return 1;
-+}
-+
-+__setup("mangled_rootblock=", active_root);
-+
- static void __exit ofpart_parser_exit(void)
- {
- deregister_mtd_parser(&ofpart_parser);
diff --git a/target/linux/kirkwood/patches-3.18/110-ib62x0.patch b/target/linux/kirkwood/patches-3.18/110-ib62x0.patch
deleted file mode 100644
index 153c41b782..0000000000
--- a/target/linux/kirkwood/patches-3.18/110-ib62x0.patch
+++ /dev/null
@@ -1,20 +0,0 @@
---- a/arch/arm/boot/dts/kirkwood-ib62x0.dts
-+++ b/arch/arm/boot/dts/kirkwood-ib62x0.dts
-@@ -117,13 +117,13 @@
- };
-
- partition@100000 {
-- label = "uImage";
-- reg = <0x0100000 0x600000>;
-+ label = "second stage u-boot";
-+ reg = <0x100000 0x200000>;
- };
-
-- partition@700000 {
-+ partition@200000 {
- label = "root";
-- reg = <0x0700000 0xf900000>;
-+ reg = <0x200000 0xfe00000>;
- };
-
- };
diff --git a/target/linux/kirkwood/patches-3.18/120-iomega_ix2_200.patch b/target/linux/kirkwood/patches-3.18/120-iomega_ix2_200.patch
deleted file mode 100644
index 33f7004a9d..0000000000
--- a/target/linux/kirkwood/patches-3.18/120-iomega_ix2_200.patch
+++ /dev/null
@@ -1,13 +0,0 @@
---- a/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts
-+++ b/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts
-@@ -192,8 +192,8 @@
- };
-
- partition@400000 {
-- label = "uInitrd";
-- reg = <0x540000 0x1000000>;
-+ label = "rootfs";
-+ reg = <0x400000 0x1C00000>;
- };
- };
-
diff --git a/target/linux/kirkwood/patches-3.18/130-iconnect.patch b/target/linux/kirkwood/patches-3.18/130-iconnect.patch
deleted file mode 100644
index c95579d793..0000000000
--- a/target/linux/kirkwood/patches-3.18/130-iconnect.patch
+++ /dev/null
@@ -1,41 +0,0 @@
---- a/arch/arm/boot/dts/kirkwood-iconnect.dts
-+++ b/arch/arm/boot/dts/kirkwood-iconnect.dts
-@@ -155,28 +155,23 @@
- status = "okay";
-
- partition@0 {
-- label = "uboot";
-- reg = <0x0000000 0xc0000>;
-+ label = "u-boot";
-+ reg = <0x0000000 0xe0000>;
- };
-
-- partition@a0000 {
-- label = "env";
-- reg = <0xa0000 0x20000>;
-+ partition@e0000 {
-+ label = "u-boot environment";
-+ reg = <0xe0000 0x100000>;
- };
-
- partition@100000 {
-- label = "zImage";
-- reg = <0x100000 0x300000>;
-+ label = "second stage u-boot";
-+ reg = <0x100000 0x200000>;
- };
-
-- partition@540000 {
-- label = "initrd";
-- reg = <0x540000 0x300000>;
-- };
--
-- partition@980000 {
-- label = "boot";
-- reg = <0x980000 0x1f400000>;
-+ partition@200000 {
-+ label = "root";
-+ reg = <0x200000 0x1fe00000>;
- };
- };
-
diff --git a/target/linux/kirkwood/patches-3.18/140-dockstar.patch b/target/linux/kirkwood/patches-3.18/140-dockstar.patch
deleted file mode 100644
index f66e19d27f..0000000000
--- a/target/linux/kirkwood/patches-3.18/140-dockstar.patch
+++ /dev/null
@@ -1,32 +0,0 @@
---- a/arch/arm/boot/dts/kirkwood-dockstar.dts
-+++ b/arch/arm/boot/dts/kirkwood-dockstar.dts
-@@ -77,18 +77,22 @@
-
- partition@0 {
- label = "u-boot";
-- reg = <0x0000000 0x100000>;
-- read-only;
-+ reg = <0x0000000 0xe0000>;
-+ };
-+
-+ partition@e0000 {
-+ label = "u-boot environment";
-+ reg = <0xe0000 0x100000>;
- };
-
- partition@100000 {
-- label = "uImage";
-- reg = <0x0100000 0x400000>;
-+ label = "second stage u-boot";
-+ reg = <0x100000 0x200000>;
- };
-
-- partition@500000 {
-- label = "data";
-- reg = <0x0500000 0xfb00000>;
-+ partition@200000 {
-+ label = "ubi";
-+ reg = <0x200000 0xfe00000>;
- };
- };
-
diff --git a/target/linux/kirkwood/patches-3.18/150-pogoplug_e02.patch b/target/linux/kirkwood/patches-3.18/150-pogoplug_e02.patch
deleted file mode 100644
index eb570738f4..0000000000
--- a/target/linux/kirkwood/patches-3.18/150-pogoplug_e02.patch
+++ /dev/null
@@ -1,127 +0,0 @@
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -147,6 +147,7 @@ dtb-$(CONFIG_MACH_KIRKWOOD) += kirkwood-
- kirkwood-openrd-base.dtb \
- kirkwood-openrd-client.dtb \
- kirkwood-openrd-ultimate.dtb \
-+ kirkwood-pogo_e02.dtb \
- kirkwood-rd88f6192.dtb \
- kirkwood-rd88f6281-z0.dtb \
- kirkwood-rd88f6281-a.dtb \
---- /dev/null
-+++ b/arch/arm/boot/dts/kirkwood-pogo_e02.dts
-@@ -0,0 +1,114 @@
-+/dts-v1/;
-+
-+#include "kirkwood.dtsi"
-+#include "kirkwood-6281.dtsi"
-+
-+/ {
-+ model = "Cloud Engines Pogoplug E02";
-+ compatible = "cloudengines,pogoe02", "marvell,kirkwood-88f6281", "marvell,kirkwood";
-+
-+ memory {
-+ device_type = "memory";
-+ reg = <0x00000000 0x10000000>;
-+ };
-+
-+ chosen {
-+ bootargs = "console=ttyS0,115200n8 earlyprintk";
-+ };
-+
-+ ocp@f1000000 {
-+ pinctrl: pin-controller@10000 {
-+ pmx_usb_power_enable: pmx-usb-power-enable {
-+ marvell,pins = "mpp29";
-+ marvell,function = "gpio";
-+ };
-+ pmx_led_green: pmx-led_green {
-+ marvell,pins = "mpp48";
-+ marvell,function = "gpio";
-+ };
-+ pmx_led_orange: pmx-led_orange {
-+ marvell,pins = "mpp49";
-+ marvell,function = "gpio";
-+ };
-+ };
-+ serial@12000 {
-+ status = "ok";
-+ };
-+ };
-+ gpio-leds {
-+ compatible = "gpio-leds";
-+ pinctrl-0 = < &pmx_usb_power_enable &pmx_led_orange
-+ &pmx_led_green >;
-+ pinctrl-names = "default";
-+
-+ health {
-+ label = "pogo_e02:green:health";
-+ gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
-+ default-state = "keep";
-+ };
-+ fault {
-+ label = "pogo_e02:orange:fault";
-+ gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
-+ };
-+ };
-+ regulators {
-+ compatible = "simple-bus";
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ pinctrl-0 = <&pmx_usb_power_enable>;
-+ pinctrl-names = "default";
-+
-+ usb_power: regulator@1 {
-+ compatible = "regulator-fixed";
-+ reg = <1>;
-+ regulator-name = "USB Power";
-+ regulator-min-microvolt = <5000000>;
-+ regulator-max-microvolt = <5000000>;
-+ enable-active-high;
-+ regulator-always-on;
-+ regulator-boot-on;
-+ gpio = <&gpio0 29 GPIO_ACTIVE_HIGH>;
-+ };
-+ };
-+};
-+
-+&nand {
-+ chip-delay = <40>;
-+ status = "okay";
-+
-+ partition@0 {
-+ label = "u-boot";
-+ reg = <0x0000000 0x100000>;
-+ read-only;
-+ };
-+
-+ partition@100000 {
-+ label = "uImage";
-+ reg = <0x0100000 0x400000>;
-+ };
-+
-+ partition@500000 {
-+ label = "pogoplug";
-+ reg = <0x0500000 0x2000000>;
-+ };
-+
-+ partition@2500000 {
-+ label = "root";
-+ reg = <0x02500000 0x5b00000>;
-+ };
-+};
-+
-+&mdio {
-+ status = "okay";
-+
-+ ethphy0: ethernet-phy@0 {
-+ reg = <0>;
-+ };
-+};
-+
-+&eth0 {
-+ status = "okay";
-+ ethernet0-port@0 {
-+ phy-handle = <&ethphy0>;
-+ };
-+};
diff --git a/target/linux/kirkwood/patches-3.18/160-ea4500.patch b/target/linux/kirkwood/patches-3.18/160-ea4500.patch
deleted file mode 100644
index 7a60fa58b6..0000000000
--- a/target/linux/kirkwood/patches-3.18/160-ea4500.patch
+++ /dev/null
@@ -1,200 +0,0 @@
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -128,6 +128,7 @@ dtb-$(CONFIG_MACH_KIRKWOOD) += kirkwood-
- kirkwood-is2.dtb \
- kirkwood-km_kirkwood.dtb \
- kirkwood-laplug.dtb \
-+ kirkwood-linksys-viper.dtb \
- kirkwood-lschlv2.dtb \
- kirkwood-lsxhl.dtb \
- kirkwood-mplcec4.dtb \
---- /dev/null
-+++ b/arch/arm/boot/dts/kirkwood-linksys-viper.dts
-@@ -0,0 +1,187 @@
-+/*
-+ * kirkwood-linksys-viper.dts - Device Tree file for Linksys E4200v2/EA4500
-+ *
-+ * (c) 2013 Jonas Gorski <jogo@openwrt.org>
-+ * (c) 2013 Deutsche Telekom Innovation Laboratories
-+ * (c) 2014 Luka Perkov <luka@openwrt.org>
-+ *
-+ * This file is licensed under the terms of the GNU General Public
-+ * License version 2. This program is licensed "as is" without any
-+ * warranty of any kind, whether express or implied.
-+ */
-+
-+/dts-v1/;
-+
-+#include "kirkwood.dtsi"
-+#include "kirkwood-6282.dtsi"
-+
-+/ {
-+ model = "Linksys E4200v2 / EA4500";
-+ compatible = "linksys,viper", "marvell,kirkwood-88f6282", "marvell,kirkwood";
-+
-+ memory {
-+ device_type = "memory";
-+ reg = <0x00000000 0x8000000>;
-+ };
-+
-+ chosen {
-+ bootargs = "console=ttyS0,115200n8 earlyprintk";
-+ };
-+
-+ mbus {
-+ pcie-controller {
-+ status = "okay";
-+
-+ pcie@1,0 {
-+ status = "okay";
-+ };
-+
-+ pcie@2,0 {
-+ status = "okay";
-+ };
-+ };
-+ };
-+
-+ ocp@f1000000 {
-+ pinctrl: pin-controller@10000 {
-+ pmx_led_white_health: pmx-led-white-health {
-+ marvell,pins = "mpp7";
-+ marvell,function = "gpo";
-+ };
-+ pmx_led_white_pulse: pmx-led-white-pulse {
-+ marvell,pins = "mpp14";
-+ marvell,function = "gpio";
-+ };
-+ pmx_btn_wps: pmx-btn-wps {
-+ marvell,pins = "mpp47";
-+ marvell,function = "gpio";
-+ };
-+ pmx_btn_reset: pmx-btn-reset {
-+ marvell,pins = "mpp48";
-+ marvell,function = "gpio";
-+ };
-+ };
-+
-+ rtc@10300 {
-+ status = "disabled";
-+ };
-+
-+ serial@12000 {
-+ status = "okay";
-+ };
-+
-+ };
-+
-+ gpio_keys {
-+ compatible = "gpio-keys";
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ pinctrl-0 = < &pmx_btn_wps &pmx_btn_reset >;
-+ pinctrl-names = "default";
-+
-+ button@15 {
-+ label = "WPS Button";
-+ linux,code = <KEY_WPS_BUTTON>;
-+ gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
-+ };
-+
-+ button@16 {
-+ label = "Reset Button";
-+ linux,code = <KEY_RESTART>;
-+ gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
-+ };
-+ };
-+
-+ gpio-leds {
-+ compatible = "gpio-leds";
-+ pinctrl-0 = < &pmx_led_white_health &pmx_led_white_pulse >;
-+ pinctrl-names = "default";
-+
-+ white-health {
-+ label = "viper:white:health";
-+ gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
-+ };
-+
-+ white-pulse {
-+ label = "viper:white:pulse";
-+ gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
-+ };
-+ };
-+
-+ mvsw61xx {
-+ compatible = "marvell,88e6171";
-+ status = "okay";
-+ reg = <0x10>;
-+
-+ mii-bus = <&mdio>;
-+ cpu-port-0 = <5>;
-+ cpu-port-1 = <6>;
-+ is-indirect;
-+ };
-+};
-+
-+&nand {
-+ status = "okay";
-+ pinctrl-0 = <&pmx_nand>;
-+ pinctrl-names = "default";
-+
-+ partition@0 {
-+ label = "u-boot";
-+ reg = <0x0 0x80000>;
-+ };
-+
-+ partition@80000 {
-+ label = "u_env";
-+ reg = <0x80000 0x20000>;
-+ };
-+
-+ partition@a0000 {
-+ label = "s_env";
-+ reg = <0xa0000 0x20000>;
-+ };
-+
-+ partition@200000 {
-+ label = "kernel1";
-+ reg = <0x200000 0x1a00000>;
-+ };
-+
-+ partition@4a0000 {
-+ label = "rootfs1";
-+ reg = <0x4a0000 0x1760000>;
-+ };
-+
-+ partition@1c00000 {
-+ label = "kernel2";
-+ reg = <0x1c00000 0x1a00000>;
-+ };
-+
-+ partition@1ea0000 {
-+ label = "rootfs2";
-+ reg = <0x1ea0000 0x1760000>;
-+ };
-+
-+ partition@3600000 {
-+ label = "syscfg";
-+ reg = <0x3600000 0x4a00000>;
-+ };
-+};
-+
-+&mdio {
-+ status = "okay";
-+};
-+
-+&eth0 {
-+ status = "okay";
-+ ethernet0-port@0 {
-+ speed = <1000>;
-+ duplex = <1>;
-+ };
-+};
-+
-+&eth1 {
-+ status = "okay";
-+ ethernet1-port@0 {
-+ speed = <1000>;
-+ duplex = <1>;
-+ };
-+};
diff --git a/target/linux/kirkwood/patches-3.18/170-ea3500.patch b/target/linux/kirkwood/patches-3.18/170-ea3500.patch
deleted file mode 100644
index 6a03c41290..0000000000
--- a/target/linux/kirkwood/patches-3.18/170-ea3500.patch
+++ /dev/null
@@ -1,192 +0,0 @@
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -128,6 +128,7 @@ dtb-$(CONFIG_MACH_KIRKWOOD) += kirkwood-
- kirkwood-is2.dtb \
- kirkwood-km_kirkwood.dtb \
- kirkwood-laplug.dtb \
-+ kirkwood-linksys-audi.dtb \
- kirkwood-linksys-viper.dtb \
- kirkwood-lschlv2.dtb \
- kirkwood-lsxhl.dtb \
---- /dev/null
-+++ b/arch/arm/boot/dts/kirkwood-linksys-audi.dts
-@@ -0,0 +1,179 @@
-+/*
-+ * kirkwood-linksys-audi.dts - Device Tree file for Linksys EA3500
-+ *
-+ * (c) 2013 Jonas Gorski <jogo@openwrt.org>
-+ * (c) 2013 Deutsche Telekom Innovation Laboratories
-+ * (c) 2014 Luka Perkov <luka@openwrt.org>
-+ * (c) 2014 Dan Walters <dan@walters.io>
-+ *
-+ * This file is licensed under the terms of the GNU General Public
-+ * License version 2. This program is licensed "as is" without any
-+ * warranty of any kind, whether express or implied.
-+ */
-+
-+/dts-v1/;
-+
-+#include "kirkwood.dtsi"
-+#include "kirkwood-6282.dtsi"
-+
-+/ {
-+ model = "Linksys EA3500";
-+ compatible = "linksys,audi", "marvell,kirkwood-88f6282", "marvell,kirkwood";
-+
-+ memory {
-+ device_type = "memory";
-+ reg = <0x00000000 0x4000000>;
-+ };
-+
-+ chosen {
-+ bootargs = "console=ttyS0,115200n8 earlyprintk";
-+ };
-+
-+ mbus {
-+ pcie-controller {
-+ status = "okay";
-+
-+ pcie@1,0 {
-+ status = "okay";
-+ };
-+
-+ pcie@2,0 {
-+ status = "okay";
-+ };
-+ };
-+ };
-+
-+ ocp@f1000000 {
-+ pinctrl: pin-controller@10000 {
-+ pmx_led_green_power: pmx-led-green-power {
-+ marvell,pins = "mpp7";
-+ marvell,function = "gpo";
-+ };
-+ pmx_btn_wps: pmx-btn-wps {
-+ marvell,pins = "mpp47";
-+ marvell,function = "gpio";
-+ };
-+ pmx_btn_reset: pmx-btn-reset {
-+ marvell,pins = "mpp48";
-+ marvell,function = "gpio";
-+ };
-+ };
-+
-+ rtc@10300 {
-+ status = "disabled";
-+ };
-+
-+ serial@12000 {
-+ status = "okay";
-+ };
-+
-+ };
-+
-+ gpio_keys {
-+ compatible = "gpio-keys";
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ pinctrl-0 = < &pmx_btn_wps &pmx_btn_reset >;
-+ pinctrl-names = "default";
-+
-+ button@15 {
-+ label = "WPS Button";
-+ linux,code = <KEY_WPS_BUTTON>;
-+ gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
-+ };
-+
-+ button@16 {
-+ label = "Reset Button";
-+ linux,code = <KEY_RESTART>;
-+ gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
-+ };
-+ };
-+
-+ gpio-leds {
-+ compatible = "gpio-leds";
-+ pinctrl-0 = < &pmx_led_green_power >;
-+ pinctrl-names = "default";
-+
-+ green-power {
-+ label = "audi:green:power";
-+ gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
-+ };
-+ };
-+
-+ mvsw61xx {
-+ compatible = "marvell,88e6171";
-+ status = "okay";
-+ reg = <0x10>;
-+
-+ mii-bus = <&mdio>;
-+ cpu-port-0 = <5>;
-+ cpu-port-1 = <6>;
-+ is-indirect;
-+ };
-+};
-+
-+&nand {
-+ status = "okay";
-+ pinctrl-0 = <&pmx_nand>;
-+ pinctrl-names = "default";
-+
-+ partition@0 {
-+ label = "u-boot";
-+ reg = <0x0 0x80000>;
-+ };
-+
-+ partition@80000 {
-+ label = "u_env";
-+ reg = <0x80000 0x4000>;
-+ };
-+
-+ partition@84000 {
-+ label = "s_env";
-+ reg = <0x84000 0x4000>;
-+ };
-+
-+ partition@200000 {
-+ label = "kernel1";
-+ reg = <0x200000 0x1400000>;
-+ };
-+
-+ partition@490000 {
-+ label = "rootfs1";
-+ reg = <0x490000 0x1170000>;
-+ };
-+
-+ partition@1600000 {
-+ label = "kernel2";
-+ reg = <0x1600000 0x1400000>;
-+ };
-+
-+ partition@1890000 {
-+ label = "rootfs2";
-+ reg = <0x1890000 0x1170000>;
-+ };
-+
-+ partition@2a00000 {
-+ label = "syscfg";
-+ reg = <0x2a00000 0x1600000>;
-+ };
-+};
-+
-+&mdio {
-+ status = "okay";
-+};
-+
-+&eth0 {
-+ status = "okay";
-+ ethernet0-port@0 {
-+ speed = <1000>;
-+ duplex = <1>;
-+ };
-+};
-+
-+&eth1 {
-+ status = "okay";
-+ ethernet1-port@0 {
-+ speed = <1000>;
-+ duplex = <1>;
-+ };
-+};
diff --git a/target/linux/kirkwood/patches-3.18/180-goflexhome.patch b/target/linux/kirkwood/patches-3.18/180-goflexhome.patch
deleted file mode 100644
index 95e67b91e2..0000000000
--- a/target/linux/kirkwood/patches-3.18/180-goflexhome.patch
+++ /dev/null
@@ -1,134 +0,0 @@
-Index: linux-3.18.27/arch/arm/boot/dts/Makefile
-===================================================================
---- linux-3.18.27.orig/arch/arm/boot/dts/Makefile
-+++ linux-3.18.27/arch/arm/boot/dts/Makefile
-@@ -120,6 +120,7 @@ dtb-$(CONFIG_MACH_KIRKWOOD) += kirkwood-
- kirkwood-ds411.dtb \
- kirkwood-ds411j.dtb \
- kirkwood-ds411slim.dtb \
-+ kirkwood-goflexhome.dtb \
- kirkwood-goflexnet.dtb \
- kirkwood-guruplug-server-plus.dtb \
- kirkwood-ib62x0.dtb \
-Index: linux-3.18.27/arch/arm/boot/dts/kirkwood-goflexhome.dts
-===================================================================
---- /dev/null
-+++ linux-3.18.27/arch/arm/boot/dts/kirkwood-goflexhome.dts
-@@ -0,0 +1,117 @@
-+/dts-v1/;
-+
-+#include "kirkwood.dtsi"
-+#include "kirkwood-6281.dtsi"
-+
-+/ {
-+ model = "Seagate GoFlex Home";
-+ compatible = "seagate,goflexhome", "marvell,kirkwood-88f6281", "marvell,kirkwood";
-+
-+ memory {
-+ device_type = "memory";
-+ reg = <0x00000000 0x8000000>;
-+ };
-+
-+ chosen {
-+ bootargs = "console=ttyS0,115200n8 earlyprintk root=/dev/sda1 rootdelay=10";
-+ stdout-path = &uart0;
-+ };
-+
-+ ocp@f1000000 {
-+ pinctrl: pin-controller@10000 {
-+ pmx_usb_power_enable: pmx-usb-power-enable {
-+ marvell,pins = "mpp29";
-+ marvell,function = "gpio";
-+ };
-+ pmx_led_white: pmx-led-white {
-+ marvell,pins = "mpp40";
-+ marvell,function = "gpio";
-+ };
-+ pmx_led_green: pmx-led_green {
-+ marvell,pins = "mpp46";
-+ marvell,function = "gpio";
-+ };
-+ pmx_led_orange: pmx-led-orange {
-+ marvell,pins = "mpp47";
-+ marvell,function = "gpio";
-+ };
-+ };
-+ serial@12000 {
-+ status = "ok";
-+ };
-+
-+ sata@80000 {
-+ status = "okay";
-+ nr-ports = <2>;
-+ };
-+
-+ };
-+ gpio-leds {
-+ compatible = "gpio-leds";
-+
-+ health {
-+ label = "status:green:health";
-+ gpios = <&gpio1 14 1>;
-+ linux,default-trigger = "default-on";
-+ };
-+ fault {
-+ label = "status:orange:fault";
-+ gpios = <&gpio1 15 1>;
-+ };
-+ misc {
-+ label = "status:white:misc";
-+ gpios = <&gpio1 8 1>;
-+ linux,default-trigger = "ide-disk";
-+ };
-+ };
-+ regulators {
-+ compatible = "simple-bus";
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ pinctrl-0 = <&pmx_usb_power_enable>;
-+ pinctrl-names = "default";
-+
-+ usb_power: regulator@1 {
-+ compatible = "regulator-fixed";
-+ reg = <1>;
-+ regulator-name = "USB Power";
-+ regulator-min-microvolt = <5000000>;
-+ regulator-max-microvolt = <5000000>;
-+ enable-active-high;
-+ regulator-always-on;
-+ regulator-boot-on;
-+ gpio = <&gpio0 29 GPIO_ACTIVE_HIGH>;
-+ };
-+ };
-+};
-+
-+&nand {
-+ chip-delay = <40>;
-+ status = "okay";
-+
-+ partition@0 {
-+ label = "u-boot";
-+ reg = <0x0000000 0x100000>;
-+ read-only;
-+ };
-+
-+ partition@100000 {
-+ label = "ubi";
-+ reg = <0x100000 0x0ff00000>;
-+ };
-+};
-+
-+&mdio {
-+ status = "okay";
-+
-+ ethphy0: ethernet-phy@0 {
-+ reg = <0>;
-+ };
-+};
-+
-+&eth0 {
-+ status = "okay";
-+ ethernet0-port@0 {
-+ phy-handle = <&ethphy0>;
-+ };
-+};
diff --git a/target/linux/kirkwood/patches-3.18/181-goflexnet.patch b/target/linux/kirkwood/patches-3.18/181-goflexnet.patch
deleted file mode 100644
index fc19e396d5..0000000000
--- a/target/linux/kirkwood/patches-3.18/181-goflexnet.patch
+++ /dev/null
@@ -1,25 +0,0 @@
-Index: linux-4.4.4/arch/arm/boot/dts/kirkwood-goflexnet.dts
-===================================================================
---- linux-4.4.4.orig/arch/arm/boot/dts/kirkwood-goflexnet.dts
-+++ linux-4.4.4/arch/arm/boot/dts/kirkwood-goflexnet.dts
-@@ -158,18 +158,8 @@
- };
-
- partition@100000 {
-- label = "uImage";
-- reg = <0x0100000 0x400000>;
-- };
--
-- partition@500000 {
-- label = "pogoplug";
-- reg = <0x0500000 0x2000000>;
-- };
--
-- partition@2500000 {
-- label = "root";
-- reg = <0x02500000 0xd800000>;
-+ label = "ubi";
-+ reg = <0x0100000 0x0ff00000>;
- };
- };
-
diff --git a/target/linux/kirkwood/patches-3.18/190-nsa310s.patch b/target/linux/kirkwood/patches-3.18/190-nsa310s.patch
deleted file mode 100644
index fbbb0e6df9..0000000000
--- a/target/linux/kirkwood/patches-3.18/190-nsa310s.patch
+++ /dev/null
@@ -1,300 +0,0 @@
---- /dev/null
-+++ b/arch/arm/boot/dts/kirkwood-nsa310s.dts
-@@ -0,0 +1,287 @@
-+/dts-v1/;
-+
-+#include "kirkwood.dtsi"
-+#include "kirkwood-6281.dtsi"
-+
-+/ {
-+ model = "ZyXEL NSA310S";
-+ compatible = "zyxel,nsa320s", "marvell,kirkwood-88f6702", "marvell,kirkwood";
-+
-+ memory {
-+ device_type = "memory";
-+ reg = <0x00000000 0x10000000>;
-+ };
-+
-+ chosen {
-+ bootargs = "console=ttyS0,115200n8 earlyprintk";
-+ stdout-path = &uart0;
-+ };
-+
-+ mbus {
-+ pcie-controller {
-+ status = "okay";
-+
-+ pcie@1,0 {
-+ status = "okay";
-+ };
-+ };
-+ };
-+
-+ ocp@f1000000 {
-+ pinctrl: pin-controller@10000 {
-+ pinctrl-names = "default";
-+
-+ pmx_sata0: pmx-sata0 {
-+ marvell,pins;
-+ marvell,function = "sata0";
-+ };
-+ pmx_sata1: pmx-sata1 {
-+ marvell,pins;
-+ marvell,function = "sata1";
-+ };
-+ pmx_usb_power: pmx-usb-power {
-+ marvell,pins = "mpp21";
-+ marvell,function = "gpio";
-+ };
-+ pmx_pwr_off: pmx-pwr-off {
-+ marvell,pins = "mpp27";
-+ marvell,function = "gpio";
-+ };
-+ pmx_btn_reset: pmx-btn-reset {
-+ marvell,pins = "mpp24";
-+ marvell,function = "gpio";
-+ };
-+ pmx_btn_copy: pmx-btn-copy {
-+ marvell,pins = "mpp25";
-+ marvell,function = "gpio";
-+ };
-+ pmx_btn_power: pmx-btn-power {
-+ marvell,pins = "mpp26";
-+ marvell,function = "gpio";
-+ };
-+ pmx_led_hdd2_green: pmx-led-hdd2-green {
-+ marvell,pins = "mpp34";
-+ marvell,function = "gpio";
-+ };
-+ pmx_led_hdd2_red: pmx-led-hdd2-red {
-+ marvell,pins = "mpp12";
-+ marvell,function = "gpio";
-+ };
-+ pmx_led_usb_green: pmx-led-usb-green {
-+ marvell,pins = "mpp15";
-+ marvell,function = "gpio";
-+ };
-+ pmx_led_copy_green: pmx-led-copy-green {
-+ marvell,pins = "mpp22";
-+ marvell,function = "gpio";
-+ };
-+ pmx_led_copy_red: pmx-led-copy-red {
-+ marvell,pins = "mpp23";
-+ marvell,function = "gpio";
-+ };
-+ pmx_led_sys_green: pmx-led-sys-green {
-+ marvell,pins = "mpp28";
-+ marvell,function = "gpio";
-+ };
-+ pmx_led_sys_orange: pmx-led-sys-orange {
-+ marvell,pins = "mpp29";
-+ marvell,function = "gpio";
-+ };
-+ pmx_led_hdd1_green: pmx-led-hdd1-green {
-+ marvell,pins = "mpp16";
-+ marvell,function = "gpio";
-+ };
-+ pmx_led_hdd1_red: pmx-led-hdd1-red {
-+ marvell,pins = "mpp13";
-+ marvell,function = "gpio";
-+ };
-+ pmx_pwr_sata1: pmx-pwr-sata1 {
-+ marvell,pins = "mpp33";
-+ marvell,function = "gpio";
-+ };
-+ };
-+
-+ serial@12000 {
-+ status = "okay";
-+ };
-+
-+ sata@80000 {
-+ status = "okay";
-+ nr-ports = <2>;
-+ };
-+
-+ rtc@10300 {
-+ status = "disabled";
-+ };
-+
-+ i2c@11000 {
-+ status = "okay";
-+ ht1382: rtc@68 {
-+ compatible = "htk,ht1382";
-+ reg = <0x68>;
-+ };
-+ };
-+ };
-+
-+ regulators {
-+ compatible = "simple-bus";
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pmx_usb_power &pmx_pwr_sata1>;
-+
-+ usb0_power: regulator@1 {
-+ compatible = "regulator-fixed";
-+ reg = <1>;
-+ regulator-name = "USB Power";
-+ regulator-min-microvolt = <5000000>;
-+ regulator-max-microvolt = <5000000>;
-+ regulator-always-on;
-+ regulator-boot-on;
-+ enable-active-high;
-+ gpio = <&gpio0 21 GPIO_ACTIVE_HIGH>;
-+ };
-+
-+ sata1_power: regulator@2 {
-+ compatible = "regulator-fixed";
-+ reg = <2>;
-+ regulator-name = "SATA1 Power";
-+ regulator-min-microvolt = <5000000>;
-+ regulator-max-microvolt = <5000000>;
-+ regulator-always-on;
-+ regulator-boot-on;
-+ enable-active-high;
-+ gpio = <&gpio1 1 GPIO_ACTIVE_HIGH>;
-+ };
-+ };
-+
-+
-+ gpio_keys {
-+ compatible = "gpio-keys";
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ pinctrl-0 = <&pmx_btn_reset &pmx_btn_copy &pmx_btn_power>;
-+ pinctrl-names = "default";
-+
-+ button@1 {
-+ label = "Power Button";
-+ linux,code = <KEY_POWER>;
-+ gpios = <&gpio0 26 GPIO_ACTIVE_HIGH>;
-+ };
-+ button@2 {
-+ label = "Copy Button";
-+ linux,code = <KEY_COPY>;
-+ gpios = <&gpio0 25 GPIO_ACTIVE_LOW>;
-+ };
-+ button@3 {
-+ label = "Reset Button";
-+ linux,code = <KEY_RESTART>;
-+ gpios = <&gpio0 24 GPIO_ACTIVE_LOW>;
-+ };
-+ };
-+
-+ gpio-leds {
-+ compatible = "gpio-leds";
-+ pinctrl-0 = <&pmx_led_hdd2_green &pmx_led_hdd2_red
-+ &pmx_led_usb_green
-+ &pmx_led_sys_green &pmx_led_sys_orange
-+ &pmx_led_copy_green &pmx_led_copy_red
-+ &pmx_led_hdd1_green &pmx_led_hdd1_red>;
-+ pinctrl-names = "default";
-+
-+ green-sys {
-+ label = "nsa310s:green:sys";
-+ gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>;
-+ linux,default-trigger = "timer";
-+ };
-+ orange-sys {
-+ label = "nsa310s:orange:sys";
-+ gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>;
-+ };
-+ green-hdd1 {
-+ label = "nsa310s:green:hdd1";
-+ gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
-+ };
-+ red-hdd1 {
-+ label = "nsa310s:red:hdd1";
-+ gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
-+ };
-+ green-hdd2 {
-+ label = "nsa310s:green:hdd2";
-+ gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
-+ };
-+ red-hdd2 {
-+ label = "nsa310s:red:hdd2";
-+ gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
-+ };
-+ green-usb {
-+ label = "nsa310s:green:usb";
-+ gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
-+ };
-+ green-copy {
-+ label = "nsa310s:green:copy";
-+ gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>;
-+ linux,default-trigger = "ide-disk";
-+ };
-+ red-copy {
-+ label = "nsa310s:red:copy";
-+ gpios = <&gpio0 23 GPIO_ACTIVE_HIGH>;
-+ };
-+ };
-+
-+ gpio_poweroff {
-+ compatible = "gpio-poweroff";
-+ pinctrl-0 = <&pmx_pwr_off>;
-+ pinctrl-names = "default";
-+ gpios = <&gpio0 27 GPIO_ACTIVE_HIGH>;
-+ };
-+};
-+
-+&nand {
-+ status = "okay";
-+ chip-delay = <35>;
-+
-+ partition@0 {
-+ label = "u-boot";
-+ reg = <0x0000000 0xe0000>;
-+ };
-+
-+ partition@e0000 {
-+ label = "u-boot environment";
-+ reg = <0xe0000 0x100000>;
-+ };
-+
-+ partition@100000 {
-+ label = "second stage u-boot";
-+ reg = <0x100000 0x200000>;
-+ };
-+
-+ partition@200000 {
-+ label = "root";
-+ reg = <0x200000 0x7e00000>;
-+ };
-+};
-+
-+&mdio {
-+ status = "okay";
-+ ethphy0: ethernet-phy@1 {
-+ compatible = "marvell,88e1318s";
-+ reg = <1>;
-+ marvell,reg-init = <0x1 0x16 0x0 0x3>,
-+ <0x1 0x10 0x0 0x1017>,
-+ <0x1 0x11 0x0 0x4408>,
-+ <0x1 0x16 0x0 0x0>,
-+ <0x1 0x4 0x0 0x1e1>,
-+ <0x1 0x9 0x0 0x300>,
-+ <0x1 0x10 0x0 0x3860>,
-+ <0x1 0x0 0x0 0x9140>;
-+ };
-+};
-+
-+&eth0 {
-+ status = "okay";
-+
-+ ethernet0-port@0 {
-+ phy-handle = <&ethphy0>;
-+ };
-+};
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -145,6 +145,7 @@ dtb-$(CONFIG_MACH_KIRKWOOD) += kirkwood-
- kirkwood-ns2mini.dtb \
- kirkwood-nsa310.dtb \
- kirkwood-nsa310a.dtb \
-+ kirkwood-nsa310s.dtb \
- kirkwood-openblocks_a6.dtb \
- kirkwood-openblocks_a7.dtb \
- kirkwood-openrd-base.dtb \
diff --git a/target/linux/kirkwood/patches-3.18/200-disable-tso.patch b/target/linux/kirkwood/patches-3.18/200-disable-tso.patch
deleted file mode 100644
index 4e8126e8c2..0000000000
--- a/target/linux/kirkwood/patches-3.18/200-disable-tso.patch
+++ /dev/null
@@ -1,35 +0,0 @@
-From: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
-Subject: [PATCH] net: mv643xx_eth: Make TSO disabled by default
-
-Data corruption has been observed to be produced by TSO. For instance,
-accessing files on a NFS-server with TSO enabled results in different data
-transferred each time.
-
-This has been observed only on Kirkwood platforms, i.e. with the mv643xx_eth
-driver. Same tests on platforms using the mvneta ethernet driver have
-passed without errors.
-
-Make TSO disabled by default for now, until we can found a proper fix
-for the regression.
-
-Fixes: 3ae8f4e0b98 ('net: mv643xx_eth: Implement software TSO')
-Reported-by: Slawomir Gajzner <slawomir.gajzner <at> gmail.com>
-Reported-by: Julien D'Ascenzio <jdascenzio <at> yahoo.fr>
-Signed-off-by: Ezequiel Garcia <ezequiel.garcia <at> free-electrons.com>
----
---- a/drivers/net/ethernet/marvell/mv643xx_eth.c
-+++ b/drivers/net/ethernet/marvell/mv643xx_eth.c
-@@ -3112,11 +3112,11 @@ static int mv643xx_eth_probe(struct plat
- dev->watchdog_timeo = 2 * HZ;
- dev->base_addr = 0;
-
-- dev->features = NETIF_F_SG | NETIF_F_IP_CSUM | NETIF_F_TSO;
-+ dev->features = NETIF_F_SG | NETIF_F_IP_CSUM;
- dev->vlan_features = dev->features;
-
- dev->features |= NETIF_F_RXCSUM;
-- dev->hw_features = dev->features;
-+ dev->hw_features = dev->features | NETIF_F_TSO;
-
- dev->priv_flags |= IFF_UNICAST_FLT;
- dev->gso_max_segs = MV643XX_MAX_TSO_SEGS;