aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/imx6/patches-3.14
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/imx6/patches-3.14')
-rw-r--r--target/linux/imx6/patches-3.14/0001-ARM-dts-disable-flexcan-by-default.patch31
-rw-r--r--target/linux/imx6/patches-3.14/0002-ARM-dts-added-several-new-imx-pinmux-groups.patch115
-rw-r--r--target/linux/imx6/patches-3.14/0003-ARM-dts-add-Gateworks-Ventana-support.patch2886
-rw-r--r--target/linux/imx6/patches-3.14/0004-ARM-dts-imx6dl-enable-cpufreq-support.patch42
-rw-r--r--target/linux/imx6/patches-3.14/0005-PCI-designware-Use-new-OF-interrupt-mapping-when-pos.patch64
-rw-r--r--target/linux/imx6/patches-3.14/0006-ARM-dts-imx6-add-PCIe-interrupt-mapping-properties.patch38
-rw-r--r--target/linux/imx6/patches-3.14/0007-ARM-dts-imx-drop-invalid-size-and-address-cells-prop.patch42
-rw-r--r--target/linux/imx6/patches-3.14/0008-ARM-imx-add-speed-grading-check-for-i.mx6-soc.patch76
-rw-r--r--target/linux/imx6/patches-3.14/0050-sky2-allow-mac-to-come-from-dt.patch69
-rw-r--r--target/linux/imx6/patches-3.14/0055-pci_imx6_fix-boot-hang-when-link-already-enabled.patch86
-rw-r--r--target/linux/imx6/patches-3.14/0060-pci_imx6_fix-link-failure.patch38
-rw-r--r--target/linux/imx6/patches-3.14/100-bootargs.patch11
-rw-r--r--target/linux/imx6/patches-3.14/200-pci_designware_add-ability-for-custom-swizzle.patch33
-rw-r--r--target/linux/imx6/patches-3.14/201-pci_imx6_ventana_fixup-for-IRQ-mismapping.patch81
-rw-r--r--target/linux/imx6/patches-3.14/202-net-igb-add-i210-i211-support-for-phy-read-write.patch129
-rw-r--r--target/linux/imx6/patches-3.14/203-net-igb-add-phy-read-write-functions-that-accept-phy.patch255
-rw-r--r--target/linux/imx6/patches-3.14/204-net-igb-register-mii_bus-for-SerDes-w-external-phy.patch303
-rw-r--r--target/linux/imx6/patches-3.14/205-phy-add-driver-for-GW16083-Ethernet-Expansion-Mezzan.patch27
-rw-r--r--target/linux/imx6/patches-3.14/206-ARM-imx-ventana-added-GW16083-to-device-tree.patch56
-rw-r--r--target/linux/imx6/patches-3.14/208-ventana-plx-allow-override-gpio-output-mask.patch58
-rw-r--r--target/linux/imx6/patches-3.14/209-ventana-gw552x.patch18
21 files changed, 0 insertions, 4458 deletions
diff --git a/target/linux/imx6/patches-3.14/0001-ARM-dts-disable-flexcan-by-default.patch b/target/linux/imx6/patches-3.14/0001-ARM-dts-disable-flexcan-by-default.patch
deleted file mode 100644
index babd544af8..0000000000
--- a/target/linux/imx6/patches-3.14/0001-ARM-dts-disable-flexcan-by-default.patch
+++ /dev/null
@@ -1,31 +0,0 @@
-From 1759b172f78263de7077a2743e11f3b718682849 Mon Sep 17 00:00:00 2001
-From: Tim Harvey <tharvey@gateworks.com>
-Date: Tue, 22 Oct 2013 21:51:27 -0700
-Subject: [PATCH 1/3] ARM: dts: disable flexcan by default
-
-Typically nodes are disabled by default and enabled when needed.
-
-Signed-off-by: Tim Harvey <tharvey@gateworks.com>
-Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
----
- arch/arm/boot/dts/imx6qdl.dtsi | 2 ++
- 1 file changed, 2 insertions(+)
-
---- a/arch/arm/boot/dts/imx6qdl.dtsi
-+++ b/arch/arm/boot/dts/imx6qdl.dtsi
-@@ -331,6 +331,7 @@
- interrupts = <0 110 0x04>;
- clocks = <&clks 108>, <&clks 109>;
- clock-names = "ipg", "per";
-+ status = "disabled";
- };
-
- can2: flexcan@02094000 {
-@@ -339,6 +340,7 @@
- interrupts = <0 111 0x04>;
- clocks = <&clks 110>, <&clks 111>;
- clock-names = "ipg", "per";
-+ status = "disabled";
- };
-
- gpt: gpt@02098000 {
diff --git a/target/linux/imx6/patches-3.14/0002-ARM-dts-added-several-new-imx-pinmux-groups.patch b/target/linux/imx6/patches-3.14/0002-ARM-dts-added-several-new-imx-pinmux-groups.patch
deleted file mode 100644
index f2d7f6ca17..0000000000
--- a/target/linux/imx6/patches-3.14/0002-ARM-dts-added-several-new-imx-pinmux-groups.patch
+++ /dev/null
@@ -1,115 +0,0 @@
-From 925467009cc6d92edb02b9e68710db022cd56f41 Mon Sep 17 00:00:00 2001
-From: Tim Harvey <tharvey@gateworks.com>
-Date: Tue, 22 Oct 2013 21:51:25 -0700
-Subject: [PATCH 2/3] ARM: dts: added several new imx-pinmux groups
-
-Signed-off-by: Tim Harvey <tharvey@gateworks.com>
-Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
----
- arch/arm/boot/dts/imx6qdl.dtsi | 60 ++++++++++++++++++++++++++++++++++++++++++
- 1 file changed, 60 insertions(+)
-
---- a/arch/arm/boot/dts/imx6qdl.dtsi
-+++ b/arch/arm/boot/dts/imx6qdl.dtsi
-@@ -639,6 +639,14 @@
- MX6QDL_PAD_DISP0_DAT19__AUD5_RXD 0x80000000
- >;
- };
-+
-+ pinctrl_audmux_4: audmux-4 {
-+ fsl,pins = <
-+ MX6QDL_PAD_EIM_D24__AUD5_RXFS 0x80000000
-+ MX6QDL_PAD_EIM_D25__AUD5_RXC 0x80000000
-+ MX6QDL_PAD_DISP0_DAT19__AUD5_RXD 0x80000000
-+ >;
-+ };
- };
-
- ecspi1 {
-@@ -811,6 +819,28 @@
- MX6QDL_PAD_SD4_DAT0__NAND_DQS 0x00b1
- >;
- };
-+
-+ /* No Strobe */
-+ pinctrl_gpmi_nand_2: gpmi-nand-2 {
-+ fsl,pins = <
-+ MX6QDL_PAD_NANDF_CLE__NAND_CLE 0xb0b1
-+ MX6QDL_PAD_NANDF_ALE__NAND_ALE 0xb0b1
-+ MX6QDL_PAD_NANDF_WP_B__NAND_WP_B 0xb0b1
-+ MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0xb000
-+ MX6QDL_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1
-+ MX6QDL_PAD_NANDF_CS1__NAND_CE1_B 0xb0b1
-+ MX6QDL_PAD_SD4_CMD__NAND_RE_B 0xb0b1
-+ MX6QDL_PAD_SD4_CLK__NAND_WE_B 0xb0b1
-+ MX6QDL_PAD_NANDF_D0__NAND_DATA00 0xb0b1
-+ MX6QDL_PAD_NANDF_D1__NAND_DATA01 0xb0b1
-+ MX6QDL_PAD_NANDF_D2__NAND_DATA02 0xb0b1
-+ MX6QDL_PAD_NANDF_D3__NAND_DATA03 0xb0b1
-+ MX6QDL_PAD_NANDF_D4__NAND_DATA04 0xb0b1
-+ MX6QDL_PAD_NANDF_D5__NAND_DATA05 0xb0b1
-+ MX6QDL_PAD_NANDF_D6__NAND_DATA06 0xb0b1
-+ MX6QDL_PAD_NANDF_D7__NAND_DATA07 0xb0b1
-+ >;
-+ };
- };
-
- hdmi_hdcp {
-@@ -1058,6 +1088,13 @@
- MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1
- >;
- };
-+
-+ pinctrl_uart1_2: uart1grp-2 {
-+ fsl,pins = <
-+ MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1
-+ MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA 0x1b0b1
-+ >;
-+ };
- };
-
- uart2 {
-@@ -1076,6 +1113,13 @@
- MX6QDL_PAD_EIM_D29__UART2_DTE_RTS_B 0x1b0b1
- >;
- };
-+
-+ pinctrl_uart2_3: uart2grp-3 {
-+ fsl,pins = <
-+ MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1
-+ MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1
-+ >;
-+ };
- };
-
- uart3 {
-@@ -1096,6 +1140,13 @@
- MX6QDL_PAD_EIM_EB3__UART3_RTS_B 0x1b0b1
- >;
- };
-+
-+ pinctrl_uart3_3: uart3grp-3 {
-+ fsl,pins = <
-+ MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1
-+ MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1
-+ >;
-+ };
- };
-
- uart4 {
-@@ -1106,6 +1157,15 @@
- >;
- };
- };
-+
-+ uart5 {
-+ pinctrl_uart5_1: uart5grp-1 {
-+ fsl,pins = <
-+ MX6QDL_PAD_KEY_COL1__UART5_TX_DATA 0x1b0b1
-+ MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA 0x1b0b1
-+ >;
-+ };
-+ };
-
- usbotg {
- pinctrl_usbotg_1: usbotggrp-1 {
diff --git a/target/linux/imx6/patches-3.14/0003-ARM-dts-add-Gateworks-Ventana-support.patch b/target/linux/imx6/patches-3.14/0003-ARM-dts-add-Gateworks-Ventana-support.patch
deleted file mode 100644
index cfc2898d2e..0000000000
--- a/target/linux/imx6/patches-3.14/0003-ARM-dts-add-Gateworks-Ventana-support.patch
+++ /dev/null
@@ -1,2886 +0,0 @@
-From e3946fe8050534ccaf8c1266cb1fa90c7f3345c3 Mon Sep 17 00:00:00 2001
-From: Tim Harvey <tharvey@gateworks.com>
-Date: Fri, 7 Feb 2014 15:24:56 +0800
-Subject: [PATCH] ARM: dts: add Gateworks Ventana support
-
-The Gateworks Ventana product family consists of several baseboard designs
-based on the Freescale i.MX6 family of processors. Each baseboard has a
-different set of possible features.
-
-Signed-off-by: Tim Harvey <tharvey@gateworks.com>
-Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
----
- arch/arm/boot/dts/Makefile | 9 +
- arch/arm/boot/dts/imx6dl-gw51xx.dts | 19 ++
- arch/arm/boot/dts/imx6dl-gw52xx.dts | 19 ++
- arch/arm/boot/dts/imx6dl-gw53xx.dts | 19 ++
- arch/arm/boot/dts/imx6dl-gw54xx.dts | 19 ++
- arch/arm/boot/dts/imx6q-gw51xx.dts | 19 ++
- arch/arm/boot/dts/imx6q-gw52xx.dts | 23 ++
- arch/arm/boot/dts/imx6q-gw53xx.dts | 23 ++
- arch/arm/boot/dts/imx6q-gw5400-a.dts | 546 ++++++++++++++++++++++++++++++++
- arch/arm/boot/dts/imx6q-gw54xx.dts | 23 ++
- arch/arm/boot/dts/imx6qdl-gw51xx.dtsi | 374 ++++++++++++++++++++++
- arch/arm/boot/dts/imx6qdl-gw52xx.dtsi | 490 ++++++++++++++++++++++++++++
- arch/arm/boot/dts/imx6qdl-gw53xx.dtsi | 553 ++++++++++++++++++++++++++++++++
- arch/arm/boot/dts/imx6qdl-gw54xx.dtsi | 580 ++++++++++++++++++++++++++++++++++
- 14 files changed, 2716 insertions(+)
- create mode 100644 arch/arm/boot/dts/imx6dl-gw51xx.dts
- create mode 100644 arch/arm/boot/dts/imx6dl-gw52xx.dts
- create mode 100644 arch/arm/boot/dts/imx6dl-gw53xx.dts
- create mode 100644 arch/arm/boot/dts/imx6dl-gw54xx.dts
- create mode 100644 arch/arm/boot/dts/imx6q-gw51xx.dts
- create mode 100644 arch/arm/boot/dts/imx6q-gw52xx.dts
- create mode 100644 arch/arm/boot/dts/imx6q-gw53xx.dts
- create mode 100644 arch/arm/boot/dts/imx6q-gw5400-a.dts
- create mode 100644 arch/arm/boot/dts/imx6q-gw54xx.dts
- create mode 100644 arch/arm/boot/dts/imx6qdl-gw51xx.dtsi
- create mode 100644 arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
- create mode 100644 arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
- create mode 100644 arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
-
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -154,12 +154,21 @@ dtb-$(CONFIG_ARCH_MXC) += \
- imx53-qsb.dtb \
- imx53-smd.dtb \
- imx6dl-cubox-i.dtb \
-+ imx6dl-gw51xx.dtb \
-+ imx6dl-gw52xx.dtb \
-+ imx6dl-gw53xx.dtb \
-+ imx6dl-gw54xx.dtb \
- imx6dl-hummingboard.dtb \
- imx6dl-sabreauto.dtb \
- imx6dl-sabresd.dtb \
- imx6dl-wandboard.dtb \
- imx6q-arm2.dtb \
- imx6q-cubox-i.dtb \
-+ imx6q-gw51xx.dtb \
-+ imx6q-gw52xx.dtb \
-+ imx6q-gw53xx.dtb \
-+ imx6q-gw5400-a.dtb \
-+ imx6q-gw54xx.dtb \
- imx6q-phytec-pbab01.dtb \
- imx6q-sabreauto.dtb \
- imx6q-sabrelite.dtb \
---- /dev/null
-+++ b/arch/arm/boot/dts/imx6dl-gw51xx.dts
-@@ -0,0 +1,19 @@
-+/*
-+ * Copyright 2013 Gateworks Corporation
-+ *
-+ * The code contained herein is licensed under the GNU General Public
-+ * License. You may obtain a copy of the GNU General Public License
-+ * Version 2 or later at the following locations:
-+ *
-+ * http://www.opensource.org/licenses/gpl-license.html
-+ * http://www.gnu.org/copyleft/gpl.html
-+ */
-+
-+/dts-v1/;
-+#include "imx6dl.dtsi"
-+#include "imx6qdl-gw51xx.dtsi"
-+
-+/ {
-+ model = "Gateworks Ventana i.MX6 DualLite/Solo GW51XX";
-+ compatible = "gw,imx6dl-gw51xx", "gw,ventana", "fsl,imx6dl";
-+};
---- /dev/null
-+++ b/arch/arm/boot/dts/imx6dl-gw52xx.dts
-@@ -0,0 +1,19 @@
-+/*
-+ * Copyright 2013 Gateworks Corporation
-+ *
-+ * The code contained herein is licensed under the GNU General Public
-+ * License. You may obtain a copy of the GNU General Public License
-+ * Version 2 or later at the following locations:
-+ *
-+ * http://www.opensource.org/licenses/gpl-license.html
-+ * http://www.gnu.org/copyleft/gpl.html
-+ */
-+
-+/dts-v1/;
-+#include "imx6dl.dtsi"
-+#include "imx6qdl-gw52xx.dtsi"
-+
-+/ {
-+ model = "Gateworks Ventana i.MX6 DualLite/Solo GW52XX";
-+ compatible = "gw,imx6dl-gw52xx", "gw,ventana", "fsl,imx6dl";
-+};
---- /dev/null
-+++ b/arch/arm/boot/dts/imx6dl-gw53xx.dts
-@@ -0,0 +1,19 @@
-+/*
-+ * Copyright 2013 Gateworks Corporation
-+ *
-+ * The code contained herein is licensed under the GNU General Public
-+ * License. You may obtain a copy of the GNU General Public License
-+ * Version 2 or later at the following locations:
-+ *
-+ * http://www.opensource.org/licenses/gpl-license.html
-+ * http://www.gnu.org/copyleft/gpl.html
-+ */
-+
-+/dts-v1/;
-+#include "imx6dl.dtsi"
-+#include "imx6qdl-gw53xx.dtsi"
-+
-+/ {
-+ model = "Gateworks Ventana i.MX6 DualLite/Solo GW53XX";
-+ compatible = "gw,imx6dl-gw53xx", "gw,ventana", "fsl,imx6dl";
-+};
---- /dev/null
-+++ b/arch/arm/boot/dts/imx6dl-gw54xx.dts
-@@ -0,0 +1,19 @@
-+/*
-+ * Copyright 2013 Gateworks Corporation
-+ *
-+ * The code contained herein is licensed under the GNU General Public
-+ * License. You may obtain a copy of the GNU General Public License
-+ * Version 2 or later at the following locations:
-+ *
-+ * http://www.opensource.org/licenses/gpl-license.html
-+ * http://www.gnu.org/copyleft/gpl.html
-+ */
-+
-+/dts-v1/;
-+#include "imx6dl.dtsi"
-+#include "imx6qdl-gw54xx.dtsi"
-+
-+/ {
-+ model = "Gateworks Ventana i.MX6 DualLite/Solo GW54XX";
-+ compatible = "gw,imx6dl-gw54xx", "gw,ventana", "fsl,imx6dl";
-+};
---- /dev/null
-+++ b/arch/arm/boot/dts/imx6q-gw51xx.dts
-@@ -0,0 +1,19 @@
-+/*
-+ * Copyright 2013 Gateworks Corporation
-+ *
-+ * The code contained herein is licensed under the GNU General Public
-+ * License. You may obtain a copy of the GNU General Public License
-+ * Version 2 or later at the following locations:
-+ *
-+ * http://www.opensource.org/licenses/gpl-license.html
-+ * http://www.gnu.org/copyleft/gpl.html
-+ */
-+
-+/dts-v1/;
-+#include "imx6q.dtsi"
-+#include "imx6qdl-gw51xx.dtsi"
-+
-+/ {
-+ model = "Gateworks Ventana i.MX6 Dual/Quad GW51XX";
-+ compatible = "gw,imx6q-gw51xx", "gw,ventana", "fsl,imx6q";
-+};
---- /dev/null
-+++ b/arch/arm/boot/dts/imx6q-gw52xx.dts
-@@ -0,0 +1,23 @@
-+/*
-+ * Copyright 2013 Gateworks Corporation
-+ *
-+ * The code contained herein is licensed under the GNU General Public
-+ * License. You may obtain a copy of the GNU General Public License
-+ * Version 2 or later at the following locations:
-+ *
-+ * http://www.opensource.org/licenses/gpl-license.html
-+ * http://www.gnu.org/copyleft/gpl.html
-+ */
-+
-+/dts-v1/;
-+#include "imx6q.dtsi"
-+#include "imx6qdl-gw52xx.dtsi"
-+
-+/ {
-+ model = "Gateworks Ventana i.MX6 Dual/Quad GW52XX";
-+ compatible = "gw,imx6q-gw52xx", "gw,ventana", "fsl,imx6q";
-+};
-+
-+&sata {
-+ status = "okay";
-+};
---- /dev/null
-+++ b/arch/arm/boot/dts/imx6q-gw53xx.dts
-@@ -0,0 +1,23 @@
-+/*
-+ * Copyright 2013 Gateworks Corporation
-+ *
-+ * The code contained herein is licensed under the GNU General Public
-+ * License. You may obtain a copy of the GNU General Public License
-+ * Version 2 or later at the following locations:
-+ *
-+ * http://www.opensource.org/licenses/gpl-license.html
-+ * http://www.gnu.org/copyleft/gpl.html
-+ */
-+
-+/dts-v1/;
-+#include "imx6q.dtsi"
-+#include "imx6qdl-gw53xx.dtsi"
-+
-+/ {
-+ model = "Gateworks Ventana i.MX6 Dual/Quad GW53XX";
-+ compatible = "gw,imx6q-gw53xx", "gw,ventana", "fsl,imx6q";
-+};
-+
-+&sata {
-+ status = "okay";
-+};
---- /dev/null
-+++ b/arch/arm/boot/dts/imx6q-gw5400-a.dts
-@@ -0,0 +1,543 @@
-+/*
-+ * Copyright 2013 Gateworks Corporation
-+ *
-+ * The code contained herein is licensed under the GNU General Public
-+ * License. You may obtain a copy of the GNU General Public License
-+ * Version 2 or later at the following locations:
-+ *
-+ * http://www.opensource.org/licenses/gpl-license.html
-+ * http://www.gnu.org/copyleft/gpl.html
-+ */
-+
-+/dts-v1/;
-+#include "imx6q.dtsi"
-+
-+/ {
-+ model = "Gateworks Ventana GW5400-A";
-+ compatible = "gw,imx6q-gw5400-a", "gw,ventana", "fsl,imx6q";
-+
-+ /* these are used by bootloader for disabling nodes */
-+ aliases {
-+ ethernet0 = &fec;
-+ ethernet1 = &eth1;
-+ i2c0 = &i2c1;
-+ i2c1 = &i2c2;
-+ i2c2 = &i2c3;
-+ led0 = &led0;
-+ led1 = &led1;
-+ led2 = &led2;
-+ sky2 = &eth1;
-+ ssi0 = &ssi1;
-+ spi0 = &ecspi1;
-+ usb0 = &usbh1;
-+ usb1 = &usbotg;
-+ usdhc2 = &usdhc3;
-+ };
-+
-+ chosen {
-+ bootargs = "console=ttymxc1,115200";
-+ };
-+
-+ leds {
-+ compatible = "gpio-leds";
-+
-+ led0: user1 {
-+ label = "user1";
-+ gpios = <&gpio4 6 0>; /* 102 -> MX6_PANLEDG */
-+ default-state = "on";
-+ linux,default-trigger = "heartbeat";
-+ };
-+
-+ led1: user2 {
-+ label = "user2";
-+ gpios = <&gpio4 10 0>; /* 106 -> MX6_PANLEDR */
-+ default-state = "off";
-+ };
-+
-+ led2: user3 {
-+ label = "user3";
-+ gpios = <&gpio4 15 1>; /* 111 -> MX6_LOCLED# */
-+ default-state = "off";
-+ };
-+ };
-+
-+ memory {
-+ reg = <0x10000000 0x40000000>;
-+ };
-+
-+ pps {
-+ compatible = "pps-gpio";
-+ gpios = <&gpio1 5 0>;
-+ status = "okay";
-+ };
-+
-+ regulators {
-+ compatible = "simple-bus";
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ reg_1p0v: regulator@0 {
-+ compatible = "regulator-fixed";
-+ reg = <0>;
-+ regulator-name = "1P0V";
-+ regulator-min-microvolt = <1000000>;
-+ regulator-max-microvolt = <1000000>;
-+ regulator-always-on;
-+ };
-+
-+ reg_3p3v: regulator@1 {
-+ compatible = "regulator-fixed";
-+ reg = <1>;
-+ regulator-name = "3P3V";
-+ regulator-min-microvolt = <3300000>;
-+ regulator-max-microvolt = <3300000>;
-+ regulator-always-on;
-+ };
-+
-+ reg_usb_h1_vbus: regulator@2 {
-+ compatible = "regulator-fixed";
-+ reg = <2>;
-+ regulator-name = "usb_h1_vbus";
-+ regulator-min-microvolt = <5000000>;
-+ regulator-max-microvolt = <5000000>;
-+ regulator-always-on;
-+ };
-+
-+ reg_usb_otg_vbus: regulator@3 {
-+ compatible = "regulator-fixed";
-+ reg = <3>;
-+ regulator-name = "usb_otg_vbus";
-+ regulator-min-microvolt = <5000000>;
-+ regulator-max-microvolt = <5000000>;
-+ gpio = <&gpio3 22 0>;
-+ enable-active-high;
-+ };
-+ };
-+
-+ sound {
-+ compatible = "fsl,imx6q-ventana-sgtl5000",
-+ "fsl,imx-audio-sgtl5000";
-+ model = "sgtl5000-audio";
-+ ssi-controller = <&ssi1>;
-+ audio-codec = <&codec>;
-+ audio-routing =
-+ "MIC_IN", "Mic Jack",
-+ "Mic Jack", "Mic Bias",
-+ "Headphone Jack", "HP_OUT";
-+ mux-int-port = <1>;
-+ mux-ext-port = <4>;
-+ };
-+};
-+
-+&audmux {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_audmux>;
-+ status = "okay";
-+};
-+
-+&ecspi1 {
-+ fsl,spi-num-chipselects = <1>;
-+ cs-gpios = <&gpio3 19 0>;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_ecspi1>;
-+ status = "okay";
-+
-+ flash: m25p80@0 {
-+ compatible = "sst,w25q256";
-+ spi-max-frequency = <30000000>;
-+ reg = <0>;
-+ };
-+};
-+
-+&fec {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_enet>;
-+ phy-mode = "rgmii";
-+ phy-reset-gpios = <&gpio1 30 0>;
-+ status = "okay";
-+};
-+
-+&i2c1 {
-+ clock-frequency = <100000>;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_i2c1>;
-+ status = "okay";
-+
-+ eeprom1: eeprom@50 {
-+ compatible = "atmel,24c02";
-+ reg = <0x50>;
-+ pagesize = <16>;
-+ };
-+
-+ eeprom2: eeprom@51 {
-+ compatible = "atmel,24c02";
-+ reg = <0x51>;
-+ pagesize = <16>;
-+ };
-+
-+ eeprom3: eeprom@52 {
-+ compatible = "atmel,24c02";
-+ reg = <0x52>;
-+ pagesize = <16>;
-+ };
-+
-+ eeprom4: eeprom@53 {
-+ compatible = "atmel,24c02";
-+ reg = <0x53>;
-+ pagesize = <16>;
-+ };
-+
-+ gpio: pca9555@23 {
-+ compatible = "nxp,pca9555";
-+ reg = <0x23>;
-+ gpio-controller;
-+ #gpio-cells = <2>;
-+ };
-+
-+ hwmon: gsc@29 {
-+ compatible = "gw,gsp";
-+ reg = <0x29>;
-+ };
-+
-+ rtc: ds1672@68 {
-+ compatible = "dallas,ds1672";
-+ reg = <0x68>;
-+ };
-+};
-+
-+&i2c2 {
-+ clock-frequency = <100000>;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_i2c2>;
-+ status = "okay";
-+
-+ pmic: pfuze100@08 {
-+ compatible = "fsl,pfuze100";
-+ reg = <0x08>;
-+
-+ regulators {
-+ sw1a_reg: sw1ab {
-+ regulator-min-microvolt = <300000>;
-+ regulator-max-microvolt = <1875000>;
-+ regulator-boot-on;
-+ regulator-always-on;
-+ regulator-ramp-delay = <6250>;
-+ };
-+
-+ sw1c_reg: sw1c {
-+ regulator-min-microvolt = <300000>;
-+ regulator-max-microvolt = <1875000>;
-+ regulator-boot-on;
-+ regulator-always-on;
-+ regulator-ramp-delay = <6250>;
-+ };
-+
-+ sw2_reg: sw2 {
-+ regulator-min-microvolt = <800000>;
-+ regulator-max-microvolt = <3950000>;
-+ regulator-boot-on;
-+ regulator-always-on;
-+ };
-+
-+ sw3a_reg: sw3a {
-+ regulator-min-microvolt = <400000>;
-+ regulator-max-microvolt = <1975000>;
-+ regulator-boot-on;
-+ regulator-always-on;
-+ };
-+
-+ sw3b_reg: sw3b {
-+ regulator-min-microvolt = <400000>;
-+ regulator-max-microvolt = <1975000>;
-+ regulator-boot-on;
-+ regulator-always-on;
-+ };
-+
-+ sw4_reg: sw4 {
-+ regulator-min-microvolt = <800000>;
-+ regulator-max-microvolt = <3300000>;
-+ };
-+
-+ swbst_reg: swbst {
-+ regulator-min-microvolt = <5000000>;
-+ regulator-max-microvolt = <5150000>;
-+ };
-+
-+ snvs_reg: vsnvs {
-+ regulator-min-microvolt = <1000000>;
-+ regulator-max-microvolt = <3000000>;
-+ regulator-boot-on;
-+ regulator-always-on;
-+ };
-+
-+ vref_reg: vrefddr {
-+ regulator-boot-on;
-+ regulator-always-on;
-+ };
-+
-+ vgen1_reg: vgen1 {
-+ regulator-min-microvolt = <800000>;
-+ regulator-max-microvolt = <1550000>;
-+ };
-+
-+ vgen2_reg: vgen2 {
-+ regulator-min-microvolt = <800000>;
-+ regulator-max-microvolt = <1550000>;
-+ };
-+
-+ vgen3_reg: vgen3 {
-+ regulator-min-microvolt = <1800000>;
-+ regulator-max-microvolt = <3300000>;
-+ };
-+
-+ vgen4_reg: vgen4 {
-+ regulator-min-microvolt = <1800000>;
-+ regulator-max-microvolt = <3300000>;
-+ regulator-always-on;
-+ };
-+
-+ vgen5_reg: vgen5 {
-+ regulator-min-microvolt = <1800000>;
-+ regulator-max-microvolt = <3300000>;
-+ regulator-always-on;
-+ };
-+
-+ vgen6_reg: vgen6 {
-+ regulator-min-microvolt = <1800000>;
-+ regulator-max-microvolt = <3300000>;
-+ regulator-always-on;
-+ };
-+ };
-+ };
-+
-+ pciswitch: pex8609@3f {
-+ compatible = "plx,pex8609";
-+ reg = <0x3f>;
-+ };
-+
-+ pciclkgen: si52147@6b {
-+ compatible = "sil,si52147";
-+ reg = <0x6b>;
-+ };
-+};
-+
-+&i2c3 {
-+ clock-frequency = <100000>;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_i2c3>;
-+ status = "okay";
-+
-+ accelerometer: mma8450@1c {
-+ compatible = "fsl,mma8450";
-+ reg = <0x1c>;
-+ };
-+
-+ codec: sgtl5000@0a {
-+ compatible = "fsl,sgtl5000";
-+ reg = <0x0a>;
-+ clocks = <&clks 201>;
-+ VDDA-supply = <&sw4_reg>;
-+ VDDIO-supply = <&reg_3p3v>;
-+ };
-+
-+ hdmiin: adv7611@4c {
-+ compatible = "adi,adv7611";
-+ reg = <0x4c>;
-+ };
-+
-+ touchscreen: egalax_ts@04 {
-+ compatible = "eeti,egalax_ts";
-+ reg = <0x04>;
-+ interrupt-parent = <&gpio7>;
-+ interrupts = <12 2>; /* gpio7_12 active low */
-+ wakeup-gpios = <&gpio7 12 0>;
-+ };
-+
-+ videoout: adv7393@2a {
-+ compatible = "adi,adv7393";
-+ reg = <0x2a>;
-+ };
-+
-+ videoin: adv7180@20 {
-+ compatible = "adi,adv7180";
-+ reg = <0x20>;
-+ };
-+};
-+
-+&iomuxc {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_hog>;
-+
-+ imx6q-gw5400-a {
-+ pinctrl_hog: hoggrp {
-+ fsl,pins = <
-+ MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x80000000 /* OTG_PWR_EN */
-+ MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x80000000 /* SPINOR_CS0# */
-+ MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x80000000 /* PCIE IRQ */
-+ MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x80000000 /* PCIE RST */
-+ MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x000130b0 /* AUD4_MCK */
-+ MX6QDL_PAD_GPIO_5__GPIO1_IO05 0x80000000 /* GPS_PPS */
-+ MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x80000000 /* TOUCH_IRQ# */
-+ MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x80000000 /* user1 led */
-+ MX6QDL_PAD_KEY_COL2__GPIO4_IO10 0x80000000 /* user2 led */
-+ MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x80000000 /* user3 led */
-+ MX6QDL_PAD_SD1_DAT0__GPIO1_IO16 0x80000000 /* USBHUB_RST# */
-+ MX6QDL_PAD_SD1_DAT3__GPIO1_IO21 0x80000000 /* MIPI_DIO */
-+ >;
-+ };
-+
-+ pinctrl_audmux: audmuxgrp {
-+ fsl,pins = <
-+ MX6QDL_PAD_SD2_DAT0__AUD4_RXD 0x130b0
-+ MX6QDL_PAD_SD2_DAT3__AUD4_TXC 0x130b0
-+ MX6QDL_PAD_SD2_DAT2__AUD4_TXD 0x110b0
-+ MX6QDL_PAD_SD2_DAT1__AUD4_TXFS 0x130b0
-+ >;
-+ };
-+
-+ pinctrl_ecspi1: ecspi1grp {
-+ fsl,pins = <
-+ MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x100b1
-+ MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x100b1
-+ MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x100b1
-+ >;
-+ };
-+
-+ pinctrl_enet: enetgrp {
-+ fsl,pins = <
-+ MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0
-+ MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0
-+ MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0
-+ MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0
-+ MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0
-+ MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0
-+ MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b0b0
-+ MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b0b0
-+ MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b0b0
-+ MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b0b0
-+ MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b0b0
-+ MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0
-+ MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0
-+ MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0
-+ MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0
-+ MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8
-+ >;
-+ };
-+
-+ pinctrl_i2c1: i2c1grp {
-+ fsl,pins = <
-+ MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
-+ MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
-+ >;
-+ };
-+
-+ pinctrl_i2c2: i2c2grp {
-+ fsl,pins = <
-+ MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
-+ MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
-+ >;
-+ };
-+
-+ pinctrl_i2c3: i2c3grp {
-+ fsl,pins = <
-+ MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1
-+ MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1
-+ >;
-+ };
-+
-+ pinctrl_uart1: uart1grp {
-+ fsl,pins = <
-+ MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1
-+ MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA 0x1b0b1
-+ >;
-+ };
-+
-+ pinctrl_uart2: uart2grp {
-+ fsl,pins = <
-+ MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1
-+ MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1
-+ >;
-+ };
-+
-+ pinctrl_uart5: uart5grp {
-+ fsl,pins = <
-+ MX6QDL_PAD_KEY_COL1__UART5_TX_DATA 0x1b0b1
-+ MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA 0x1b0b1
-+ >;
-+ };
-+
-+ pinctrl_usbotg: usbotggrp {
-+ fsl,pins = <
-+ MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059
-+ >;
-+ };
-+
-+ pinctrl_usdhc3: usdhc3grp {
-+ fsl,pins = <
-+ MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059
-+ MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059
-+ MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059
-+ MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059
-+ MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059
-+ MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
-+ >;
-+ };
-+ };
-+};
-+
-+&ldb {
-+ status = "okay";
-+};
-+
-+&pcie {
-+ reset-gpio = <&gpio1 29 0>;
-+ status = "okay";
-+
-+ eth1: sky2@8 { /* MAC/PHY on bus 8 */
-+ compatible = "marvell,sky2";
-+ };
-+};
-+
-+&ssi1 {
-+ fsl,mode = "i2s-slave";
-+ status = "okay";
-+};
-+
-+&uart1 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_uart1>;
-+ status = "okay";
-+};
-+
-+&uart2 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_uart2>;
-+ status = "okay";
-+};
-+
-+&uart5 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_uart5>;
-+ status = "okay";
-+};
-+
-+&usbotg {
-+ vbus-supply = <&reg_usb_otg_vbus>;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_usbotg>;
-+ disable-over-current;
-+ status = "okay";
-+};
-+
-+&usbh1 {
-+ vbus-supply = <&reg_usb_h1_vbus>;
-+ status = "okay";
-+};
-+
-+&usdhc3 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_usdhc3>;
-+ cd-gpios = <&gpio7 0 0>;
-+ vmmc-supply = <&reg_3p3v>;
-+ status = "okay";
-+};
---- /dev/null
-+++ b/arch/arm/boot/dts/imx6q-gw54xx.dts
-@@ -0,0 +1,23 @@
-+/*
-+ * Copyright 2013 Gateworks Corporation
-+ *
-+ * The code contained herein is licensed under the GNU General Public
-+ * License. You may obtain a copy of the GNU General Public License
-+ * Version 2 or later at the following locations:
-+ *
-+ * http://www.opensource.org/licenses/gpl-license.html
-+ * http://www.gnu.org/copyleft/gpl.html
-+ */
-+
-+/dts-v1/;
-+#include "imx6q.dtsi"
-+#include "imx6qdl-gw54xx.dtsi"
-+
-+/ {
-+ model = "Gateworks Ventana i.MX6 Dual/Quad GW54XX";
-+ compatible = "gw,imx6q-gw54xx", "gw,ventana", "fsl,imx6q";
-+};
-+
-+&sata {
-+ status = "okay";
-+};
---- /dev/null
-+++ b/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi
-@@ -0,0 +1,374 @@
-+/*
-+ * Copyright 2013 Gateworks Corporation
-+ *
-+ * The code contained herein is licensed under the GNU General Public
-+ * License. You may obtain a copy of the GNU General Public License
-+ * Version 2 or later at the following locations:
-+ *
-+ * http://www.opensource.org/licenses/gpl-license.html
-+ * http://www.gnu.org/copyleft/gpl.html
-+ */
-+
-+/ {
-+ /* these are used by bootloader for disabling nodes */
-+ aliases {
-+ can0 = &can1;
-+ ethernet0 = &fec;
-+ led0 = &led0;
-+ led1 = &led1;
-+ nand = &gpmi;
-+ usb0 = &usbh1;
-+ usb1 = &usbotg;
-+ };
-+
-+ chosen {
-+ bootargs = "console=ttymxc1,115200";
-+ };
-+
-+ leds {
-+ compatible = "gpio-leds";
-+
-+ led0: user1 {
-+ label = "user1";
-+ gpios = <&gpio4 6 0>; /* 102 -> MX6_PANLEDG */
-+ default-state = "on";
-+ linux,default-trigger = "heartbeat";
-+ };
-+
-+ led1: user2 {
-+ label = "user2";
-+ gpios = <&gpio4 7 0>; /* 103 -> MX6_PANLEDR */
-+ default-state = "off";
-+ };
-+ };
-+
-+ memory {
-+ reg = <0x10000000 0x20000000>;
-+ };
-+
-+ pps {
-+ compatible = "pps-gpio";
-+ gpios = <&gpio1 26 0>;
-+ status = "okay";
-+ };
-+
-+ regulators {
-+ compatible = "simple-bus";
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ reg_3p3v: regulator@0 {
-+ compatible = "regulator-fixed";
-+ reg = <0>;
-+ regulator-name = "3P3V";
-+ regulator-min-microvolt = <3300000>;
-+ regulator-max-microvolt = <3300000>;
-+ regulator-always-on;
-+ };
-+
-+ reg_5p0v: regulator@1 {
-+ compatible = "regulator-fixed";
-+ reg = <1>;
-+ regulator-name = "5P0V";
-+ regulator-min-microvolt = <5000000>;
-+ regulator-max-microvolt = <5000000>;
-+ regulator-always-on;
-+ };
-+
-+ reg_usb_otg_vbus: regulator@2 {
-+ compatible = "regulator-fixed";
-+ reg = <2>;
-+ regulator-name = "usb_otg_vbus";
-+ regulator-min-microvolt = <5000000>;
-+ regulator-max-microvolt = <5000000>;
-+ gpio = <&gpio3 22 0>;
-+ enable-active-high;
-+ };
-+ };
-+};
-+
-+&fec {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_enet>;
-+ phy-mode = "rgmii";
-+ phy-reset-gpios = <&gpio1 30 0>;
-+ status = "okay";
-+};
-+
-+&gpmi {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_gpmi_nand>;
-+ status = "okay";
-+};
-+
-+&i2c1 {
-+ clock-frequency = <100000>;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_i2c1>;
-+ status = "okay";
-+
-+ eeprom1: eeprom@50 {
-+ compatible = "atmel,24c02";
-+ reg = <0x50>;
-+ pagesize = <16>;
-+ };
-+
-+ eeprom2: eeprom@51 {
-+ compatible = "atmel,24c02";
-+ reg = <0x51>;
-+ pagesize = <16>;
-+ };
-+
-+ eeprom3: eeprom@52 {
-+ compatible = "atmel,24c02";
-+ reg = <0x52>;
-+ pagesize = <16>;
-+ };
-+
-+ eeprom4: eeprom@53 {
-+ compatible = "atmel,24c02";
-+ reg = <0x53>;
-+ pagesize = <16>;
-+ };
-+
-+ gpio: pca9555@23 {
-+ compatible = "nxp,pca9555";
-+ reg = <0x23>;
-+ gpio-controller;
-+ #gpio-cells = <2>;
-+ };
-+
-+ hwmon: gsc@29 {
-+ compatible = "gw,gsp";
-+ reg = <0x29>;
-+ };
-+
-+ rtc: ds1672@68 {
-+ compatible = "dallas,ds1672";
-+ reg = <0x68>;
-+ };
-+};
-+
-+&i2c2 {
-+ clock-frequency = <100000>;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_i2c2>;
-+ status = "okay";
-+
-+ pmic: ltc3676@3c {
-+ compatible = "ltc,ltc3676";
-+ reg = <0x3c>;
-+
-+ regulators {
-+ sw1_reg: ltc3676__sw1 {
-+ regulator-min-microvolt = <1175000>;
-+ regulator-max-microvolt = <1175000>;
-+ regulator-boot-on;
-+ regulator-always-on;
-+ };
-+
-+ sw2_reg: ltc3676__sw2 {
-+ regulator-min-microvolt = <1800000>;
-+ regulator-max-microvolt = <1800000>;
-+ regulator-boot-on;
-+ regulator-always-on;
-+ };
-+
-+ sw3_reg: ltc3676__sw3 {
-+ regulator-min-microvolt = <1175000>;
-+ regulator-max-microvolt = <1175000>;
-+ regulator-boot-on;
-+ regulator-always-on;
-+ };
-+
-+ sw4_reg: ltc3676__sw4 {
-+ regulator-min-microvolt = <1500000>;
-+ regulator-max-microvolt = <1500000>;
-+ regulator-boot-on;
-+ regulator-always-on;
-+ };
-+
-+ ldo2_reg: ltc3676__ldo2 {
-+ regulator-min-microvolt = <2500000>;
-+ regulator-max-microvolt = <2500000>;
-+ regulator-boot-on;
-+ regulator-always-on;
-+ };
-+
-+ ldo4_reg: ltc3676__ldo4 {
-+ regulator-min-microvolt = <3000000>;
-+ regulator-max-microvolt = <3000000>;
-+ };
-+ };
-+ };
-+};
-+
-+&i2c3 {
-+ clock-frequency = <100000>;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_i2c3>;
-+ status = "okay";
-+
-+ videoin: adv7180@20 {
-+ compatible = "adi,adv7180";
-+ reg = <0x20>;
-+ };
-+};
-+
-+&iomuxc {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_hog>;
-+
-+ imx6qdl-gw51xx {
-+ pinctrl_hog: hoggrp {
-+ fsl,pins = <
-+ MX6QDL_PAD_EIM_A19__GPIO2_IO19 0x80000000 /* MEZZ_DIO0 */
-+ MX6QDL_PAD_EIM_A20__GPIO2_IO18 0x80000000 /* MEZZ_DIO1 */
-+ MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x80000000 /* OTG_PWR_EN */
-+ MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x80000000 /* GPS_PPS */
-+ MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x80000000 /* PHY Reset */
-+ MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x80000000 /* PCIE_RST# */
-+ MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x80000000 /* user1 led */
-+ MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x80000000 /* user2 led */
-+ >;
-+ };
-+
-+ pinctrl_enet: enetgrp {
-+ fsl,pins = <
-+ MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0
-+ MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0
-+ MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0
-+ MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0
-+ MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0
-+ MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0
-+ MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b0b0
-+ MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b0b0
-+ MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b0b0
-+ MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b0b0
-+ MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b0b0
-+ MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0
-+ MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0
-+ MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0
-+ MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0
-+ MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8
-+ >;
-+ };
-+
-+ pinctrl_gpmi_nand: gpminandgrp {
-+ fsl,pins = <
-+ MX6QDL_PAD_NANDF_CLE__NAND_CLE 0xb0b1
-+ MX6QDL_PAD_NANDF_ALE__NAND_ALE 0xb0b1
-+ MX6QDL_PAD_NANDF_WP_B__NAND_WP_B 0xb0b1
-+ MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0xb000
-+ MX6QDL_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1
-+ MX6QDL_PAD_NANDF_CS1__NAND_CE1_B 0xb0b1
-+ MX6QDL_PAD_SD4_CMD__NAND_RE_B 0xb0b1
-+ MX6QDL_PAD_SD4_CLK__NAND_WE_B 0xb0b1
-+ MX6QDL_PAD_NANDF_D0__NAND_DATA00 0xb0b1
-+ MX6QDL_PAD_NANDF_D1__NAND_DATA01 0xb0b1
-+ MX6QDL_PAD_NANDF_D2__NAND_DATA02 0xb0b1
-+ MX6QDL_PAD_NANDF_D3__NAND_DATA03 0xb0b1
-+ MX6QDL_PAD_NANDF_D4__NAND_DATA04 0xb0b1
-+ MX6QDL_PAD_NANDF_D5__NAND_DATA05 0xb0b1
-+ MX6QDL_PAD_NANDF_D6__NAND_DATA06 0xb0b1
-+ MX6QDL_PAD_NANDF_D7__NAND_DATA07 0xb0b1
-+ >;
-+ };
-+
-+ pinctrl_i2c1: i2c1grp {
-+ fsl,pins = <
-+ MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
-+ MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
-+ >;
-+ };
-+
-+ pinctrl_i2c2: i2c2grp {
-+ fsl,pins = <
-+ MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
-+ MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
-+ >;
-+ };
-+
-+ pinctrl_i2c3: i2c3grp {
-+ fsl,pins = <
-+ MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1
-+ MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1
-+ >;
-+ };
-+
-+ pinctrl_uart1: uart1grp {
-+ fsl,pins = <
-+ MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1
-+ MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA 0x1b0b1
-+ >;
-+ };
-+
-+ pinctrl_uart2: uart2grp {
-+ fsl,pins = <
-+ MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1
-+ MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1
-+ >;
-+ };
-+
-+ pinctrl_uart3: uart3grp {
-+ fsl,pins = <
-+ MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1
-+ MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1
-+ >;
-+ };
-+
-+ pinctrl_uart5: uart5grp {
-+ fsl,pins = <
-+ MX6QDL_PAD_KEY_COL1__UART5_TX_DATA 0x1b0b1
-+ MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA 0x1b0b1
-+ >;
-+ };
-+
-+ pinctrl_usbotg: usbotggrp {
-+ fsl,pins = <
-+ MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059
-+ >;
-+ };
-+ };
-+};
-+
-+&pcie {
-+ reset-gpio = <&gpio1 0 0>;
-+ status = "okay";
-+};
-+
-+&uart1 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_uart1>;
-+ status = "okay";
-+};
-+
-+&uart2 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_uart2>;
-+ status = "okay";
-+};
-+
-+&uart3 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_uart3>;
-+ status = "okay";
-+};
-+
-+&uart5 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_uart5>;
-+ status = "okay";
-+};
-+
-+&usbotg {
-+ vbus-supply = <&reg_usb_otg_vbus>;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_usbotg>;
-+ disable-over-current;
-+ status = "okay";
-+};
-+
-+&usbh1 {
-+ status = "okay";
-+};
---- /dev/null
-+++ b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
-@@ -0,0 +1,528 @@
-+/*
-+ * Copyright 2013 Gateworks Corporation
-+ *
-+ * The code contained herein is licensed under the GNU General Public
-+ * License. You may obtain a copy of the GNU General Public License
-+ * Version 2 or later at the following locations:
-+ *
-+ * http://www.opensource.org/licenses/gpl-license.html
-+ * http://www.gnu.org/copyleft/gpl.html
-+ */
-+
-+/ {
-+ /* these are used by bootloader for disabling nodes */
-+ aliases {
-+ ethernet0 = &fec;
-+ led0 = &led0;
-+ led1 = &led1;
-+ led2 = &led2;
-+ nand = &gpmi;
-+ ssi0 = &ssi1;
-+ usb0 = &usbh1;
-+ usb1 = &usbotg;
-+ usdhc2 = &usdhc3;
-+ };
-+
-+ chosen {
-+ bootargs = "console=ttymxc1,115200";
-+ };
-+
-+ backlight {
-+ compatible = "pwm-backlight";
-+ pwms = <&pwm4 0 5000000>;
-+ brightness-levels = <0 4 8 16 32 64 128 255>;
-+ default-brightness-level = <7>;
-+ status = "okay";
-+ };
-+
-+ leds {
-+ compatible = "gpio-leds";
-+
-+ led0: user1 {
-+ label = "user1";
-+ gpios = <&gpio4 6 0>; /* 102 -> MX6_PANLEDG */
-+ default-state = "on";
-+ linux,default-trigger = "heartbeat";
-+ };
-+
-+ led1: user2 {
-+ label = "user2";
-+ gpios = <&gpio4 7 0>; /* 103 -> MX6_PANLEDR */
-+ default-state = "off";
-+ };
-+
-+ led2: user3 {
-+ label = "user3";
-+ gpios = <&gpio4 15 1>; /* 111 - MX6_LOCLED# */
-+ default-state = "off";
-+ };
-+ };
-+
-+ memory {
-+ reg = <0x10000000 0x20000000>;
-+ };
-+
-+ pps {
-+ compatible = "pps-gpio";
-+ gpios = <&gpio1 26 0>;
-+ status = "okay";
-+ };
-+
-+ regulators {
-+ compatible = "simple-bus";
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ reg_1p0v: regulator@0 {
-+ compatible = "regulator-fixed";
-+ reg = <0>;
-+ regulator-name = "1P0V";
-+ regulator-min-microvolt = <1000000>;
-+ regulator-max-microvolt = <1000000>;
-+ regulator-always-on;
-+ };
-+
-+ /* remove this fixed regulator once ltc3676__sw2 driver available */
-+ reg_1p8v: regulator@1 {
-+ compatible = "regulator-fixed";
-+ reg = <1>;
-+ regulator-name = "1P8V";
-+ regulator-min-microvolt = <1800000>;
-+ regulator-max-microvolt = <1800000>;
-+ regulator-always-on;
-+ };
-+
-+ reg_3p3v: regulator@2 {
-+ compatible = "regulator-fixed";
-+ reg = <2>;
-+ regulator-name = "3P3V";
-+ regulator-min-microvolt = <3300000>;
-+ regulator-max-microvolt = <3300000>;
-+ regulator-always-on;
-+ };
-+
-+ reg_5p0v: regulator@3 {
-+ compatible = "regulator-fixed";
-+ reg = <3>;
-+ regulator-name = "5P0V";
-+ regulator-min-microvolt = <5000000>;
-+ regulator-max-microvolt = <5000000>;
-+ regulator-always-on;
-+ };
-+
-+ reg_usb_otg_vbus: regulator@4 {
-+ compatible = "regulator-fixed";
-+ reg = <4>;
-+ regulator-name = "usb_otg_vbus";
-+ regulator-min-microvolt = <5000000>;
-+ regulator-max-microvolt = <5000000>;
-+ gpio = <&gpio3 22 0>;
-+ enable-active-high;
-+ };
-+ };
-+
-+ sound {
-+ compatible = "fsl,imx6q-ventana-sgtl5000",
-+ "fsl,imx-audio-sgtl5000";
-+ model = "sgtl5000-audio";
-+ ssi-controller = <&ssi1>;
-+ audio-codec = <&codec>;
-+ audio-routing =
-+ "MIC_IN", "Mic Jack",
-+ "Mic Jack", "Mic Bias",
-+ "Headphone Jack", "HP_OUT";
-+ mux-int-port = <1>;
-+ mux-ext-port = <4>;
-+ };
-+};
-+
-+&audmux {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_audmux>;
-+ status = "okay";
-+};
-+
-+&fec {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_enet>;
-+ phy-mode = "rgmii";
-+ phy-reset-gpios = <&gpio1 30 0>;
-+ status = "okay";
-+};
-+
-+&gpmi {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_gpmi_nand>;
-+ status = "okay";
-+};
-+
-+&i2c1 {
-+ clock-frequency = <100000>;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_i2c1>;
-+ status = "okay";
-+
-+ eeprom1: eeprom@50 {
-+ compatible = "atmel,24c02";
-+ reg = <0x50>;
-+ pagesize = <16>;
-+ };
-+
-+ eeprom2: eeprom@51 {
-+ compatible = "atmel,24c02";
-+ reg = <0x51>;
-+ pagesize = <16>;
-+ };
-+
-+ eeprom3: eeprom@52 {
-+ compatible = "atmel,24c02";
-+ reg = <0x52>;
-+ pagesize = <16>;
-+ };
-+
-+ eeprom4: eeprom@53 {
-+ compatible = "atmel,24c02";
-+ reg = <0x53>;
-+ pagesize = <16>;
-+ };
-+
-+ gpio: pca9555@23 {
-+ compatible = "nxp,pca9555";
-+ reg = <0x23>;
-+ gpio-controller;
-+ #gpio-cells = <2>;
-+ };
-+
-+ hwmon: gsc@29 {
-+ compatible = "gw,gsp";
-+ reg = <0x29>;
-+ };
-+
-+ rtc: ds1672@68 {
-+ compatible = "dallas,ds1672";
-+ reg = <0x68>;
-+ };
-+};
-+
-+&i2c2 {
-+ clock-frequency = <100000>;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_i2c2>;
-+ status = "okay";
-+
-+ pciswitch: pex8609@3f {
-+ compatible = "plx,pex8609";
-+ reg = <0x3f>;
-+ };
-+
-+ pmic: ltc3676@3c {
-+ compatible = "ltc,ltc3676";
-+ reg = <0x3c>;
-+
-+ regulators {
-+ sw1_reg: ltc3676__sw1 {
-+ regulator-min-microvolt = <1175000>;
-+ regulator-max-microvolt = <1175000>;
-+ regulator-boot-on;
-+ regulator-always-on;
-+ };
-+
-+ sw2_reg: ltc3676__sw2 {
-+ regulator-min-microvolt = <1800000>;
-+ regulator-max-microvolt = <1800000>;
-+ regulator-boot-on;
-+ regulator-always-on;
-+ };
-+
-+ sw3_reg: ltc3676__sw3 {
-+ regulator-min-microvolt = <1175000>;
-+ regulator-max-microvolt = <1175000>;
-+ regulator-boot-on;
-+ regulator-always-on;
-+ };
-+
-+ sw4_reg: ltc3676__sw4 {
-+ regulator-min-microvolt = <1500000>;
-+ regulator-max-microvolt = <1500000>;
-+ regulator-boot-on;
-+ regulator-always-on;
-+ };
-+
-+ ldo2_reg: ltc3676__ldo2 {
-+ regulator-min-microvolt = <2500000>;
-+ regulator-max-microvolt = <2500000>;
-+ regulator-boot-on;
-+ regulator-always-on;
-+ };
-+
-+ ldo3_reg: ltc3676__ldo3 {
-+ regulator-min-microvolt = <1800000>;
-+ regulator-max-microvolt = <1800000>;
-+ regulator-boot-on;
-+ regulator-always-on;
-+ };
-+
-+ ldo4_reg: ltc3676__ldo4 {
-+ regulator-min-microvolt = <3000000>;
-+ regulator-max-microvolt = <3000000>;
-+ };
-+ };
-+ };
-+};
-+
-+&i2c3 {
-+ clock-frequency = <100000>;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_i2c3>;
-+ status = "okay";
-+
-+ accelerometer: fxos8700@1e {
-+ compatible = "fsl,fxos8700";
-+ reg = <0x13>;
-+ };
-+
-+ codec: sgtl5000@0a {
-+ compatible = "fsl,sgtl5000";
-+ reg = <0x0a>;
-+ clocks = <&clks 201>;
-+ VDDA-supply = <&reg_1p8v>;
-+ VDDIO-supply = <&reg_3p3v>;
-+ };
-+
-+ touchscreen: egalax_ts@04 {
-+ compatible = "eeti,egalax_ts";
-+ reg = <0x04>;
-+ interrupt-parent = <&gpio7>;
-+ interrupts = <12 2>; /* gpio7_12 active low */
-+ wakeup-gpios = <&gpio7 12 0>;
-+ };
-+
-+ videoin: adv7180@20 {
-+ compatible = "adi,adv7180";
-+ reg = <0x20>;
-+ };
-+};
-+
-+&iomuxc {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_hog>;
-+
-+ imx6qdl-gw52xx {
-+ pinctrl_hog: hoggrp {
-+ fsl,pins = <
-+ MX6QDL_PAD_EIM_A19__GPIO2_IO19 0x80000000 /* MEZZ_DIO0 */
-+ MX6QDL_PAD_EIM_A20__GPIO2_IO18 0x80000000 /* MEZZ_DIO1 */
-+ MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x80000000 /* OTG_PWR_EN */
-+ MX6QDL_PAD_EIM_D31__GPIO3_IO31 0x80000000 /* VIDDEC_PDN# */
-+ MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x80000000 /* PHY Reset */
-+ MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x80000000 /* PCIE_RST# */
-+ MX6QDL_PAD_ENET_RXD0__GPIO1_IO27 0x80000000 /* GPS_PWDN */
-+ MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x80000000 /* GPS_PPS */
-+ MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x000130b0 /* AUD4_MCK */
-+ MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x80000000 /* USB_SEL_PCI */
-+ MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x80000000 /* TOUCH_IRQ# */
-+ MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x80000000 /* user1 led */
-+ MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x80000000 /* user2 led */
-+ MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x80000000 /* user3 led */
-+ MX6QDL_PAD_SD2_CMD__GPIO1_IO11 0x80000000 /* LVDS_TCH# */
-+ MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x80000000 /* SD3_CD# */
-+ MX6QDL_PAD_SD4_DAT3__GPIO2_IO11 0x80000000 /* UART2_EN# */
-+ >;
-+ };
-+
-+ pinctrl_audmux: audmuxgrp {
-+ fsl,pins = <
-+ MX6QDL_PAD_SD2_DAT0__AUD4_RXD 0x130b0
-+ MX6QDL_PAD_SD2_DAT3__AUD4_TXC 0x130b0
-+ MX6QDL_PAD_SD2_DAT2__AUD4_TXD 0x110b0
-+ MX6QDL_PAD_SD2_DAT1__AUD4_TXFS 0x130b0
-+ >;
-+ };
-+
-+ pinctrl_enet: enetgrp {
-+ fsl,pins = <
-+ MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0
-+ MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0
-+ MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0
-+ MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0
-+ MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0
-+ MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0
-+ MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b0b0
-+ MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b0b0
-+ MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b0b0
-+ MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b0b0
-+ MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b0b0
-+ MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0
-+ MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0
-+ MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0
-+ MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0
-+ MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8
-+ >;
-+ };
-+
-+ pinctrl_gpmi_nand: gpminandgrp {
-+ fsl,pins = <
-+ MX6QDL_PAD_NANDF_CLE__NAND_CLE 0xb0b1
-+ MX6QDL_PAD_NANDF_ALE__NAND_ALE 0xb0b1
-+ MX6QDL_PAD_NANDF_WP_B__NAND_WP_B 0xb0b1
-+ MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0xb000
-+ MX6QDL_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1
-+ MX6QDL_PAD_NANDF_CS1__NAND_CE1_B 0xb0b1
-+ MX6QDL_PAD_SD4_CMD__NAND_RE_B 0xb0b1
-+ MX6QDL_PAD_SD4_CLK__NAND_WE_B 0xb0b1
-+ MX6QDL_PAD_NANDF_D0__NAND_DATA00 0xb0b1
-+ MX6QDL_PAD_NANDF_D1__NAND_DATA01 0xb0b1
-+ MX6QDL_PAD_NANDF_D2__NAND_DATA02 0xb0b1
-+ MX6QDL_PAD_NANDF_D3__NAND_DATA03 0xb0b1
-+ MX6QDL_PAD_NANDF_D4__NAND_DATA04 0xb0b1
-+ MX6QDL_PAD_NANDF_D5__NAND_DATA05 0xb0b1
-+ MX6QDL_PAD_NANDF_D6__NAND_DATA06 0xb0b1
-+ MX6QDL_PAD_NANDF_D7__NAND_DATA07 0xb0b1
-+ >;
-+ };
-+
-+ pinctrl_i2c1: i2c1grp {
-+ fsl,pins = <
-+ MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
-+ MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
-+ >;
-+ };
-+
-+ pinctrl_i2c2: i2c2grp {
-+ fsl,pins = <
-+ MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
-+ MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
-+ >;
-+ };
-+
-+ pinctrl_i2c3: i2c3grp {
-+ fsl,pins = <
-+ MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1
-+ MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1
-+ >;
-+ };
-+
-+ pinctrl_pwm4: pwm4grp {
-+ fsl,pins = <
-+ MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x1b0b1
-+ >;
-+ };
-+
-+ pinctrl_uart1: uart1grp {
-+ fsl,pins = <
-+ MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1
-+ MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA 0x1b0b1
-+ >;
-+ };
-+
-+ pinctrl_uart2: uart2grp {
-+ fsl,pins = <
-+ MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1
-+ MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1
-+ >;
-+ };
-+
-+ pinctrl_uart5: uart5grp {
-+ fsl,pins = <
-+ MX6QDL_PAD_KEY_COL1__UART5_TX_DATA 0x1b0b1
-+ MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA 0x1b0b1
-+ >;
-+ };
-+
-+ pinctrl_usbotg: usbotggrp {
-+ fsl,pins = <
-+ MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059
-+ >;
-+ };
-+
-+ pinctrl_usdhc3: usdhc3grp {
-+ fsl,pins = <
-+ MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059
-+ MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059
-+ MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059
-+ MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059
-+ MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059
-+ MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
-+ >;
-+ };
-+ };
-+};
-+
-+&ldb {
-+ status = "okay";
-+
-+ lvds-channel@0 {
-+ fsl,data-mapping = "spwg";
-+ fsl,data-width = <18>;
-+ status = "okay";
-+
-+ display-timings {
-+ native-mode = <&timing0>;
-+ timing0: hsd100pxn1 {
-+ clock-frequency = <65000000>;
-+ hactive = <1024>;
-+ vactive = <768>;
-+ hback-porch = <220>;
-+ hfront-porch = <40>;
-+ vback-porch = <21>;
-+ vfront-porch = <7>;
-+ hsync-len = <60>;
-+ vsync-len = <10>;
-+ };
-+ };
-+ };
-+};
-+
-+&pcie {
-+ reset-gpio = <&gpio1 29 0>;
-+ status = "okay";
-+};
-+
-+&pwm4 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_pwm4>;
-+ status = "okay";
-+};
-+
-+&ssi1 {
-+ fsl,mode = "i2s-slave";
-+ status = "okay";
-+};
-+
-+&uart1 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_uart1>;
-+ status = "okay";
-+};
-+
-+&uart2 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_uart2>;
-+ status = "okay";
-+};
-+
-+&uart5 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_uart5>;
-+ status = "okay";
-+};
-+
-+&usbotg {
-+ vbus-supply = <&reg_usb_otg_vbus>;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_usbotg>;
-+ disable-over-current;
-+ status = "okay";
-+};
-+
-+&usbh1 {
-+ status = "okay";
-+};
-+
-+&usdhc3 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_usdhc3>;
-+ cd-gpios = <&gpio7 0 0>;
-+ vmmc-supply = <&reg_3p3v>;
-+ status = "okay";
-+};
---- /dev/null
-+++ b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
-@@ -0,0 +1,573 @@
-+/*
-+ * Copyright 2013 Gateworks Corporation
-+ *
-+ * The code contained herein is licensed under the GNU General Public
-+ * License. You may obtain a copy of the GNU General Public License
-+ * Version 2 or later at the following locations:
-+ *
-+ * http://www.opensource.org/licenses/gpl-license.html
-+ * http://www.gnu.org/copyleft/gpl.html
-+ */
-+
-+/ {
-+ /* these are used by bootloader for disabling nodes */
-+ aliases {
-+ can0 = &can1;
-+ ethernet0 = &fec;
-+ ethernet1 = &eth1;
-+ led0 = &led0;
-+ led1 = &led1;
-+ led2 = &led2;
-+ nand = &gpmi;
-+ sky2 = &eth1;
-+ ssi0 = &ssi1;
-+ usb0 = &usbh1;
-+ usb1 = &usbotg;
-+ usdhc2 = &usdhc3;
-+ };
-+
-+ chosen {
-+ bootargs = "console=ttymxc1,115200";
-+ };
-+
-+ backlight {
-+ compatible = "pwm-backlight";
-+ pwms = <&pwm4 0 5000000>;
-+ brightness-levels = <0 4 8 16 32 64 128 255>;
-+ default-brightness-level = <7>;
-+ status = "okay";
-+ };
-+
-+ leds {
-+ compatible = "gpio-leds";
-+
-+ led0: user1 {
-+ label = "user1";
-+ gpios = <&gpio4 6 0>; /* 102 -> MX6_PANLEDG */
-+ default-state = "on";
-+ linux,default-trigger = "heartbeat";
-+ };
-+
-+ led1: user2 {
-+ label = "user2";
-+ gpios = <&gpio4 7 0>; /* 103 -> MX6_PANLEDR */
-+ default-state = "off";
-+ };
-+
-+ led2: user3 {
-+ label = "user3";
-+ gpios = <&gpio4 15 1>; /* 111 -> MX6_LOCLED# */
-+ default-state = "off";
-+ };
-+ };
-+
-+ memory {
-+ reg = <0x10000000 0x40000000>;
-+ };
-+
-+ pps {
-+ compatible = "pps-gpio";
-+ gpios = <&gpio1 26 0>;
-+ status = "okay";
-+ };
-+
-+ regulators {
-+ compatible = "simple-bus";
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ reg_1p0v: regulator@0 {
-+ compatible = "regulator-fixed";
-+ reg = <0>;
-+ regulator-name = "1P0V";
-+ regulator-min-microvolt = <1000000>;
-+ regulator-max-microvolt = <1000000>;
-+ regulator-always-on;
-+ };
-+
-+ /* remove when pmic 1p8 regulator available */
-+ reg_1p8v: regulator@1 {
-+ compatible = "regulator-fixed";
-+ reg = <1>;
-+ regulator-name = "1P8V";
-+ regulator-min-microvolt = <1800000>;
-+ regulator-max-microvolt = <1800000>;
-+ regulator-always-on;
-+ };
-+
-+ reg_3p3v: regulator@2 {
-+ compatible = "regulator-fixed";
-+ reg = <2>;
-+ regulator-name = "3P3V";
-+ regulator-min-microvolt = <3300000>;
-+ regulator-max-microvolt = <3300000>;
-+ regulator-always-on;
-+ };
-+
-+ reg_usb_h1_vbus: regulator@3 {
-+ compatible = "regulator-fixed";
-+ reg = <3>;
-+ regulator-name = "usb_h1_vbus";
-+ regulator-min-microvolt = <5000000>;
-+ regulator-max-microvolt = <5000000>;
-+ regulator-always-on;
-+ };
-+
-+ reg_usb_otg_vbus: regulator@4 {
-+ compatible = "regulator-fixed";
-+ reg = <4>;
-+ regulator-name = "usb_otg_vbus";
-+ regulator-min-microvolt = <5000000>;
-+ regulator-max-microvolt = <5000000>;
-+ gpio = <&gpio3 22 0>;
-+ enable-active-high;
-+ };
-+ };
-+
-+ sound {
-+ compatible = "fsl,imx6q-ventana-sgtl5000",
-+ "fsl,imx-audio-sgtl5000";
-+ model = "sgtl5000-audio";
-+ ssi-controller = <&ssi1>;
-+ audio-codec = <&codec>;
-+ audio-routing =
-+ "MIC_IN", "Mic Jack",
-+ "Mic Jack", "Mic Bias",
-+ "Headphone Jack", "HP_OUT";
-+ mux-int-port = <1>;
-+ mux-ext-port = <4>;
-+ };
-+};
-+
-+&audmux {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_audmux>;
-+ status = "okay";
-+};
-+
-+&can1 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_flexcan1>;
-+ status = "okay";
-+};
-+
-+&fec {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_enet>;
-+ phy-mode = "rgmii";
-+ phy-reset-gpios = <&gpio1 30 0>;
-+ status = "okay";
-+};
-+
-+&gpmi {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_gpmi_nand>;
-+ status = "okay";
-+};
-+
-+&i2c1 {
-+ clock-frequency = <100000>;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_i2c1>;
-+ status = "okay";
-+
-+ eeprom1: eeprom@50 {
-+ compatible = "atmel,24c02";
-+ reg = <0x50>;
-+ pagesize = <16>;
-+ };
-+
-+ eeprom2: eeprom@51 {
-+ compatible = "atmel,24c02";
-+ reg = <0x51>;
-+ pagesize = <16>;
-+ };
-+
-+ eeprom3: eeprom@52 {
-+ compatible = "atmel,24c02";
-+ reg = <0x52>;
-+ pagesize = <16>;
-+ };
-+
-+ eeprom4: eeprom@53 {
-+ compatible = "atmel,24c02";
-+ reg = <0x53>;
-+ pagesize = <16>;
-+ };
-+
-+ gpio: pca9555@23 {
-+ compatible = "nxp,pca9555";
-+ reg = <0x23>;
-+ gpio-controller;
-+ #gpio-cells = <2>;
-+ };
-+
-+ hwmon: gsc@29 {
-+ compatible = "gw,gsp";
-+ reg = <0x29>;
-+ };
-+
-+ rtc: ds1672@68 {
-+ compatible = "dallas,ds1672";
-+ reg = <0x68>;
-+ };
-+};
-+
-+&i2c2 {
-+ clock-frequency = <100000>;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_i2c2>;
-+ status = "okay";
-+
-+ pciclkgen: si53156@6b {
-+ compatible = "sil,si53156";
-+ reg = <0x6b>;
-+ };
-+
-+ pciswitch: pex8606@3f {
-+ compatible = "plx,pex8606";
-+ reg = <0x3f>;
-+ };
-+
-+ pmic: ltc3676@3c {
-+ compatible = "ltc,ltc3676";
-+ reg = <0x3c>;
-+
-+ regulators {
-+ /* VDD_SOC */
-+ sw1_reg: ltc3676__sw1 {
-+ regulator-min-microvolt = <1175000>;
-+ regulator-max-microvolt = <1175000>;
-+ regulator-boot-on;
-+ regulator-always-on;
-+ };
-+
-+ /* VDD_1P8 */
-+ sw2_reg: ltc3676__sw2 {
-+ regulator-min-microvolt = <1800000>;
-+ regulator-max-microvolt = <1800000>;
-+ regulator-boot-on;
-+ regulator-always-on;
-+ };
-+
-+ /* VDD_ARM */
-+ sw3_reg: ltc3676__sw3 {
-+ regulator-min-microvolt = <1175000>;
-+ regulator-max-microvolt = <1175000>;
-+ regulator-boot-on;
-+ regulator-always-on;
-+ };
-+
-+ /* VDD_DDR */
-+ sw4_reg: ltc3676__sw4 {
-+ regulator-min-microvolt = <1500000>;
-+ regulator-max-microvolt = <1500000>;
-+ regulator-boot-on;
-+ regulator-always-on;
-+ };
-+
-+ /* VDD_2P5 */
-+ ldo2_reg: ltc3676__ldo2 {
-+ regulator-min-microvolt = <2500000>;
-+ regulator-max-microvolt = <2500000>;
-+ regulator-boot-on;
-+ regulator-always-on;
-+ };
-+
-+ /* VDD_1P8 */
-+ ldo3_reg: ltc3676__ldo3 {
-+ regulator-min-microvolt = <1800000>;
-+ regulator-max-microvolt = <1800000>;
-+ regulator-boot-on;
-+ regulator-always-on;
-+ };
-+
-+ /* VDD_HIGH */
-+ ldo4_reg: ltc3676__ldo4 {
-+ regulator-min-microvolt = <3000000>;
-+ regulator-max-microvolt = <3000000>;
-+ };
-+ };
-+ };
-+};
-+
-+&i2c3 {
-+ clock-frequency = <100000>;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_i2c3>;
-+ status = "okay";
-+
-+ accelerometer: fxos8700@1e {
-+ compatible = "fsl,fxos8700";
-+ reg = <0x1e>;
-+ };
-+
-+ codec: sgtl5000@0a {
-+ compatible = "fsl,sgtl5000";
-+ reg = <0x0a>;
-+ clocks = <&clks 201>;
-+ VDDA-supply = <&reg_1p8v>;
-+ VDDIO-supply = <&reg_3p3v>;
-+ };
-+
-+ hdmiin: adv7611@4c {
-+ compatible = "adi,adv7611";
-+ reg = <0x4c>;
-+ };
-+
-+ touchscreen: egalax_ts@04 {
-+ compatible = "eeti,egalax_ts";
-+ reg = <0x04>;
-+ interrupt-parent = <&gpio1>;
-+ interrupts = <11 2>; /* gpio1_11 active low */
-+ wakeup-gpios = <&gpio1 11 0>;
-+ };
-+
-+ videoout: adv7393@2a {
-+ compatible = "adi,adv7393";
-+ reg = <0x2a>;
-+ };
-+
-+ videoin: adv7180@20 {
-+ compatible = "adi,adv7180";
-+ reg = <0x20>;
-+ };
-+};
-+
-+&iomuxc {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_hog>;
-+
-+ imx6qdl-gw53xx {
-+ pinctrl_hog: hoggrp {
-+ fsl,pins = <
-+ MX6QDL_PAD_EIM_A19__GPIO2_IO19 0x80000000 /* PCIE6EXP_DIO0 */
-+ MX6QDL_PAD_EIM_A20__GPIO2_IO18 0x80000000 /* PCIE6EXP_DIO1 */
-+ MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x80000000 /* OTG_PWR_EN */
-+ MX6QDL_PAD_ENET_RXD0__GPIO1_IO27 0x80000000 /* GPS_SHDN */
-+ MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x80000000 /* GPS_PPS */
-+ MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x80000000 /* PCIE IRQ */
-+ MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x80000000 /* PCIE RST */
-+ MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x000130b0 /* AUD4_MCK */
-+ MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x80000000 /* CAN_STBY */
-+ MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x80000000 /* PMIC_IRQ# */
-+ MX6QDL_PAD_GPIO_9__GPIO1_IO09 0x80000000 /* HUB_RST# */
-+ MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x80000000 /* PCIE_WDIS# */
-+ MX6QDL_PAD_GPIO_19__GPIO4_IO05 0x80000000 /* ACCEL_IRQ# */
-+ MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x80000000 /* user1 led */
-+ MX6QDL_PAD_KEY_COL4__GPIO4_IO14 0x80000000 /* USBOTG_OC# */
-+ MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x80000000 /* user2 led */
-+ MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x80000000 /* user3 led */
-+ MX6QDL_PAD_SD2_CMD__GPIO1_IO11 0x80000000 /* TOUCH_IRQ# */
-+ MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x80000000 /* SD3_DET# */
-+ >;
-+ };
-+
-+ pinctrl_audmux: audmuxgrp {
-+ fsl,pins = <
-+ MX6QDL_PAD_SD2_DAT0__AUD4_RXD 0x130b0
-+ MX6QDL_PAD_SD2_DAT3__AUD4_TXC 0x130b0
-+ MX6QDL_PAD_SD2_DAT2__AUD4_TXD 0x110b0
-+ MX6QDL_PAD_SD2_DAT1__AUD4_TXFS 0x130b0
-+ >;
-+ };
-+
-+ pinctrl_enet: enetgrp {
-+ fsl,pins = <
-+ MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0
-+ MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0
-+ MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0
-+ MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0
-+ MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0
-+ MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0
-+ MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b0b0
-+ MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b0b0
-+ MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b0b0
-+ MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b0b0
-+ MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b0b0
-+ MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0
-+ MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0
-+ MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0
-+ MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0
-+ MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8
-+ >;
-+ };
-+
-+ pinctrl_flexcan1: flexcan1grp {
-+ fsl,pins = <
-+ MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x80000000
-+ MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x80000000
-+ >;
-+ };
-+
-+ pinctrl_gpmi_nand: gpminandgrp {
-+ fsl,pins = <
-+ MX6QDL_PAD_NANDF_CLE__NAND_CLE 0xb0b1
-+ MX6QDL_PAD_NANDF_ALE__NAND_ALE 0xb0b1
-+ MX6QDL_PAD_NANDF_WP_B__NAND_WP_B 0xb0b1
-+ MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0xb000
-+ MX6QDL_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1
-+ MX6QDL_PAD_NANDF_CS1__NAND_CE1_B 0xb0b1
-+ MX6QDL_PAD_SD4_CMD__NAND_RE_B 0xb0b1
-+ MX6QDL_PAD_SD4_CLK__NAND_WE_B 0xb0b1
-+ MX6QDL_PAD_NANDF_D0__NAND_DATA00 0xb0b1
-+ MX6QDL_PAD_NANDF_D1__NAND_DATA01 0xb0b1
-+ MX6QDL_PAD_NANDF_D2__NAND_DATA02 0xb0b1
-+ MX6QDL_PAD_NANDF_D3__NAND_DATA03 0xb0b1
-+ MX6QDL_PAD_NANDF_D4__NAND_DATA04 0xb0b1
-+ MX6QDL_PAD_NANDF_D5__NAND_DATA05 0xb0b1
-+ MX6QDL_PAD_NANDF_D6__NAND_DATA06 0xb0b1
-+ MX6QDL_PAD_NANDF_D7__NAND_DATA07 0xb0b1
-+ >;
-+ };
-+
-+ pinctrl_i2c1: i2c1grp {
-+ fsl,pins = <
-+ MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
-+ MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
-+ >;
-+ };
-+
-+ pinctrl_i2c2: i2c2grp {
-+ fsl,pins = <
-+ MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
-+ MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
-+ >;
-+ };
-+
-+ pinctrl_i2c3: i2c3grp {
-+ fsl,pins = <
-+ MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1
-+ MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1
-+ >;
-+ };
-+
-+ pinctrl_pwm4: pwm4grp {
-+ fsl,pins = <
-+ MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x1b0b1
-+ >;
-+ };
-+
-+ pinctrl_uart1: uart1grp {
-+ fsl,pins = <
-+ MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1
-+ MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA 0x1b0b1
-+ >;
-+ };
-+
-+ pinctrl_uart2: uart2grp {
-+ fsl,pins = <
-+ MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1
-+ MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1
-+ >;
-+ };
-+
-+ pinctrl_uart5: uart5grp {
-+ fsl,pins = <
-+ MX6QDL_PAD_KEY_COL1__UART5_TX_DATA 0x1b0b1
-+ MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA 0x1b0b1
-+ >;
-+ };
-+
-+ pinctrl_usbotg: usbotggrp {
-+ fsl,pins = <
-+ MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059
-+ >;
-+ };
-+
-+ pinctrl_usdhc3: usdhc3grp {
-+ fsl,pins = <
-+ MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059
-+ MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059
-+ MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059
-+ MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059
-+ MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059
-+ MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
-+ >;
-+ };
-+ };
-+};
-+
-+&ldb {
-+ status = "okay";
-+
-+ lvds-channel@0 {
-+ fsl,data-mapping = "spwg";
-+ fsl,data-width = <18>;
-+ status = "okay";
-+
-+ display-timings {
-+ native-mode = <&timing0>;
-+ timing0: hsd100pxn1 {
-+ clock-frequency = <65000000>;
-+ hactive = <1024>;
-+ vactive = <768>;
-+ hback-porch = <220>;
-+ hfront-porch = <40>;
-+ vback-porch = <21>;
-+ vfront-porch = <7>;
-+ hsync-len = <60>;
-+ vsync-len = <10>;
-+ };
-+ };
-+ };
-+};
-+
-+&pcie {
-+ reset-gpio = <&gpio1 29 0>;
-+ status = "okay";
-+
-+ eth1: sky2@8 { /* MAC/PHY on bus 8 */
-+ compatible = "marvell,sky2";
-+ };
-+};
-+
-+&pwm4 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_pwm4>;
-+ status = "okay";
-+};
-+
-+&ssi1 {
-+ fsl,mode = "i2s-slave";
-+ status = "okay";
-+};
-+
-+&uart1 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_uart1>;
-+ status = "okay";
-+};
-+
-+&uart2 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_uart2>;
-+ status = "okay";
-+};
-+
-+&uart5 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_uart5>;
-+ status = "okay";
-+};
-+
-+&usbotg {
-+ vbus-supply = <&reg_usb_otg_vbus>;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_usbotg>;
-+ disable-over-current;
-+ status = "okay";
-+};
-+
-+&usbh1 {
-+ vbus-supply = <&reg_usb_h1_vbus>;
-+ status = "okay";
-+};
-+
-+&usdhc3 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_usdhc3>;
-+ cd-gpios = <&gpio7 0 0>;
-+ vmmc-supply = <&reg_3p3v>;
-+ status = "okay";
-+};
---- /dev/null
-+++ b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
-@@ -0,0 +1,600 @@
-+/*
-+ * Copyright 2013 Gateworks Corporation
-+ *
-+ * The code contained herein is licensed under the GNU General Public
-+ * License. You may obtain a copy of the GNU General Public License
-+ * Version 2 or later at the following locations:
-+ *
-+ * http://www.opensource.org/licenses/gpl-license.html
-+ * http://www.gnu.org/copyleft/gpl.html
-+ */
-+
-+/ {
-+ /* these are used by bootloader for disabling nodes */
-+ aliases {
-+ can0 = &can1;
-+ ethernet0 = &fec;
-+ ethernet1 = &eth1;
-+ led0 = &led0;
-+ led1 = &led1;
-+ led2 = &led2;
-+ nand = &gpmi;
-+ sky2 = &eth1;
-+ ssi0 = &ssi1;
-+ usb0 = &usbh1;
-+ usb1 = &usbotg;
-+ usdhc2 = &usdhc3;
-+ };
-+
-+ chosen {
-+ bootargs = "console=ttymxc1,115200";
-+ };
-+
-+ backlight {
-+ compatible = "pwm-backlight";
-+ pwms = <&pwm4 0 5000000>;
-+ brightness-levels = <0 4 8 16 32 64 128 255>;
-+ default-brightness-level = <7>;
-+ status = "okay";
-+ };
-+
-+ leds {
-+ compatible = "gpio-leds";
-+
-+ led0: user1 {
-+ label = "user1";
-+ gpios = <&gpio4 6 0>; /* 102 -> MX6_PANLEDG */
-+ default-state = "on";
-+ linux,default-trigger = "heartbeat";
-+ };
-+
-+ led1: user2 {
-+ label = "user2";
-+ gpios = <&gpio4 7 0>; /* 103 -> MX6_PANLEDR */
-+ default-state = "off";
-+ };
-+
-+ led2: user3 {
-+ label = "user3";
-+ gpios = <&gpio4 15 1>; /* 111 -> MX6_LOCLED# */
-+ default-state = "off";
-+ };
-+ };
-+
-+ memory {
-+ reg = <0x10000000 0x40000000>;
-+ };
-+
-+ pps {
-+ compatible = "pps-gpio";
-+ gpios = <&gpio1 26 0>;
-+ status = "okay";
-+ };
-+
-+ regulators {
-+ compatible = "simple-bus";
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ reg_1p0v: regulator@0 {
-+ compatible = "regulator-fixed";
-+ reg = <0>;
-+ regulator-name = "1P0V";
-+ regulator-min-microvolt = <1000000>;
-+ regulator-max-microvolt = <1000000>;
-+ regulator-always-on;
-+ };
-+
-+ reg_3p3v: regulator@1 {
-+ compatible = "regulator-fixed";
-+ reg = <1>;
-+ regulator-name = "3P3V";
-+ regulator-min-microvolt = <3300000>;
-+ regulator-max-microvolt = <3300000>;
-+ regulator-always-on;
-+ };
-+
-+ reg_usb_h1_vbus: regulator@2 {
-+ compatible = "regulator-fixed";
-+ reg = <2>;
-+ regulator-name = "usb_h1_vbus";
-+ regulator-min-microvolt = <5000000>;
-+ regulator-max-microvolt = <5000000>;
-+ regulator-always-on;
-+ };
-+
-+ reg_usb_otg_vbus: regulator@3 {
-+ compatible = "regulator-fixed";
-+ reg = <3>;
-+ regulator-name = "usb_otg_vbus";
-+ regulator-min-microvolt = <5000000>;
-+ regulator-max-microvolt = <5000000>;
-+ gpio = <&gpio3 22 0>;
-+ enable-active-high;
-+ };
-+ };
-+
-+ sound {
-+ compatible = "fsl,imx6q-ventana-sgtl5000",
-+ "fsl,imx-audio-sgtl5000";
-+ model = "sgtl5000-audio";
-+ ssi-controller = <&ssi1>;
-+ audio-codec = <&codec>;
-+ audio-routing =
-+ "MIC_IN", "Mic Jack",
-+ "Mic Jack", "Mic Bias",
-+ "Headphone Jack", "HP_OUT";
-+ mux-int-port = <1>;
-+ mux-ext-port = <4>;
-+ };
-+};
-+
-+&audmux {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_audmux>; /* AUD4<->sgtl5000 */
-+ status = "okay";
-+};
-+
-+&can1 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_flexcan1>;
-+ status = "okay";
-+};
-+
-+&fec {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_enet>;
-+ phy-mode = "rgmii";
-+ phy-reset-gpios = <&gpio1 30 0>;
-+ status = "okay";
-+};
-+
-+&gpmi {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_gpmi_nand>;
-+ status = "okay";
-+};
-+
-+&i2c1 {
-+ clock-frequency = <100000>;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_i2c1>;
-+ status = "okay";
-+
-+ eeprom1: eeprom@50 {
-+ compatible = "atmel,24c02";
-+ reg = <0x50>;
-+ pagesize = <16>;
-+ };
-+
-+ eeprom2: eeprom@51 {
-+ compatible = "atmel,24c02";
-+ reg = <0x51>;
-+ pagesize = <16>;
-+ };
-+
-+ eeprom3: eeprom@52 {
-+ compatible = "atmel,24c02";
-+ reg = <0x52>;
-+ pagesize = <16>;
-+ };
-+
-+ eeprom4: eeprom@53 {
-+ compatible = "atmel,24c02";
-+ reg = <0x53>;
-+ pagesize = <16>;
-+ };
-+
-+ gpio: pca9555@23 {
-+ compatible = "nxp,pca9555";
-+ reg = <0x23>;
-+ gpio-controller;
-+ #gpio-cells = <2>;
-+ };
-+
-+ hwmon: gsc@29 {
-+ compatible = "gw,gsp";
-+ reg = <0x29>;
-+ };
-+
-+ rtc: ds1672@68 {
-+ compatible = "dallas,ds1672";
-+ reg = <0x68>;
-+ };
-+};
-+
-+&i2c2 {
-+ clock-frequency = <100000>;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_i2c2>;
-+ status = "okay";
-+
-+ pmic: pfuze100@08 {
-+ compatible = "fsl,pfuze100";
-+ reg = <0x08>;
-+
-+ regulators {
-+ sw1a_reg: sw1ab {
-+ regulator-min-microvolt = <300000>;
-+ regulator-max-microvolt = <1875000>;
-+ regulator-boot-on;
-+ regulator-always-on;
-+ regulator-ramp-delay = <6250>;
-+ };
-+
-+ sw1c_reg: sw1c {
-+ regulator-min-microvolt = <300000>;
-+ regulator-max-microvolt = <1875000>;
-+ regulator-boot-on;
-+ regulator-always-on;
-+ regulator-ramp-delay = <6250>;
-+ };
-+
-+ sw2_reg: sw2 {
-+ regulator-min-microvolt = <800000>;
-+ regulator-max-microvolt = <3950000>;
-+ regulator-boot-on;
-+ regulator-always-on;
-+ };
-+
-+ sw3a_reg: sw3a {
-+ regulator-min-microvolt = <400000>;
-+ regulator-max-microvolt = <1975000>;
-+ regulator-boot-on;
-+ regulator-always-on;
-+ };
-+
-+ sw3b_reg: sw3b {
-+ regulator-min-microvolt = <400000>;
-+ regulator-max-microvolt = <1975000>;
-+ regulator-boot-on;
-+ regulator-always-on;
-+ };
-+
-+ sw4_reg: sw4 {
-+ regulator-min-microvolt = <800000>;
-+ regulator-max-microvolt = <3300000>;
-+ };
-+
-+ swbst_reg: swbst {
-+ regulator-min-microvolt = <5000000>;
-+ regulator-max-microvolt = <5150000>;
-+ };
-+
-+ snvs_reg: vsnvs {
-+ regulator-min-microvolt = <1000000>;
-+ regulator-max-microvolt = <3000000>;
-+ regulator-boot-on;
-+ regulator-always-on;
-+ };
-+
-+ vref_reg: vrefddr {
-+ regulator-boot-on;
-+ regulator-always-on;
-+ };
-+
-+ vgen1_reg: vgen1 {
-+ regulator-min-microvolt = <800000>;
-+ regulator-max-microvolt = <1550000>;
-+ };
-+
-+ vgen2_reg: vgen2 {
-+ regulator-min-microvolt = <800000>;
-+ regulator-max-microvolt = <1550000>;
-+ };
-+
-+ vgen3_reg: vgen3 {
-+ regulator-min-microvolt = <1800000>;
-+ regulator-max-microvolt = <3300000>;
-+ };
-+
-+ vgen4_reg: vgen4 {
-+ regulator-min-microvolt = <1800000>;
-+ regulator-max-microvolt = <3300000>;
-+ regulator-always-on;
-+ };
-+
-+ vgen5_reg: vgen5 {
-+ regulator-min-microvolt = <1800000>;
-+ regulator-max-microvolt = <3300000>;
-+ regulator-always-on;
-+ };
-+
-+ vgen6_reg: vgen6 {
-+ regulator-min-microvolt = <1800000>;
-+ regulator-max-microvolt = <3300000>;
-+ regulator-always-on;
-+ };
-+ };
-+ };
-+
-+ pciswitch: pex8609@3f {
-+ compatible = "plx,pex8609";
-+ reg = <0x3f>;
-+ };
-+
-+ pciclkgen: si52147@6b {
-+ compatible = "sil,si52147";
-+ reg = <0x6b>;
-+ };
-+};
-+
-+&i2c3 {
-+ clock-frequency = <100000>;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_i2c3>;
-+ status = "okay";
-+
-+ accelerometer: fxos8700@1e {
-+ compatible = "fsl,fxos8700";
-+ reg = <0x1e>;
-+ };
-+
-+ codec: sgtl5000@0a {
-+ compatible = "fsl,sgtl5000";
-+ reg = <0x0a>;
-+ clocks = <&clks 201>;
-+ VDDA-supply = <&sw4_reg>;
-+ VDDIO-supply = <&reg_3p3v>;
-+ };
-+
-+ hdmiin: adv7611@4c {
-+ compatible = "adi,adv7611";
-+ reg = <0x4c>;
-+ };
-+
-+ touchscreen: egalax_ts@04 {
-+ compatible = "eeti,egalax_ts";
-+ reg = <0x04>;
-+ interrupt-parent = <&gpio7>;
-+ interrupts = <12 2>; /* gpio7_12 active low */
-+ wakeup-gpios = <&gpio7 12 0>;
-+ };
-+
-+ videoout: adv7393@2a {
-+ compatible = "adi,adv7393";
-+ reg = <0x2a>;
-+ };
-+
-+ videoin: adv7180@20 {
-+ compatible = "adi,adv7180";
-+ reg = <0x20>;
-+ };
-+};
-+
-+&iomuxc {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_hog>;
-+
-+ imx6qdl-gw54xx {
-+ pinctrl_hog: hoggrp {
-+ fsl,pins = <
-+ MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x80000000 /* OTG_PWR_EN */
-+ MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x80000000 /* SPINOR_CS0# */
-+ MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x80000000 /* GPS_PPS */
-+ MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x80000000 /* PCIE IRQ */
-+ MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x80000000 /* PCIE RST */
-+ MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x000130b0 /* AUD4_MCK */
-+ MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x80000000 /* CAN_STBY */
-+ MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x80000000 /* TOUCH_IRQ# */
-+ MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x80000000 /* user1 led */
-+ MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x80000000 /* user2 led */
-+ MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x80000000 /* user3 led */
-+ MX6QDL_PAD_SD1_DAT0__GPIO1_IO16 0x80000000 /* USBHUB_RST# */
-+ MX6QDL_PAD_SD1_DAT3__GPIO1_IO21 0x80000000 /* MIPI_DIO */
-+ >;
-+ };
-+
-+ pinctrl_audmux: audmuxgrp {
-+ fsl,pins = <
-+ MX6QDL_PAD_SD2_DAT0__AUD4_RXD 0x130b0
-+ MX6QDL_PAD_SD2_DAT3__AUD4_TXC 0x130b0
-+ MX6QDL_PAD_SD2_DAT2__AUD4_TXD 0x110b0
-+ MX6QDL_PAD_SD2_DAT1__AUD4_TXFS 0x130b0
-+ >;
-+ };
-+
-+ pinctrl_enet: enetgrp {
-+ fsl,pins = <
-+ MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0
-+ MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0
-+ MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0
-+ MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0
-+ MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0
-+ MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0
-+ MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b0b0
-+ MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b0b0
-+ MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b0b0
-+ MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b0b0
-+ MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b0b0
-+ MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0
-+ MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0
-+ MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0
-+ MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0
-+ MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8
-+ >;
-+ };
-+
-+ pinctrl_flexcan1: flexcan1grp {
-+ fsl,pins = <
-+ MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x80000000
-+ MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x80000000
-+ >;
-+ };
-+
-+ pinctrl_gpmi_nand: gpminandgrp {
-+ fsl,pins = <
-+ MX6QDL_PAD_NANDF_CLE__NAND_CLE 0xb0b1
-+ MX6QDL_PAD_NANDF_ALE__NAND_ALE 0xb0b1
-+ MX6QDL_PAD_NANDF_WP_B__NAND_WP_B 0xb0b1
-+ MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0xb000
-+ MX6QDL_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1
-+ MX6QDL_PAD_NANDF_CS1__NAND_CE1_B 0xb0b1
-+ MX6QDL_PAD_SD4_CMD__NAND_RE_B 0xb0b1
-+ MX6QDL_PAD_SD4_CLK__NAND_WE_B 0xb0b1
-+ MX6QDL_PAD_NANDF_D0__NAND_DATA00 0xb0b1
-+ MX6QDL_PAD_NANDF_D1__NAND_DATA01 0xb0b1
-+ MX6QDL_PAD_NANDF_D2__NAND_DATA02 0xb0b1
-+ MX6QDL_PAD_NANDF_D3__NAND_DATA03 0xb0b1
-+ MX6QDL_PAD_NANDF_D4__NAND_DATA04 0xb0b1
-+ MX6QDL_PAD_NANDF_D5__NAND_DATA05 0xb0b1
-+ MX6QDL_PAD_NANDF_D6__NAND_DATA06 0xb0b1
-+ MX6QDL_PAD_NANDF_D7__NAND_DATA07 0xb0b1
-+ >;
-+ };
-+
-+ pinctrl_i2c1: i2c1grp {
-+ fsl,pins = <
-+ MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
-+ MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
-+ >;
-+ };
-+
-+ pinctrl_i2c2: i2c2grp {
-+ fsl,pins = <
-+ MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
-+ MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
-+ >;
-+ };
-+
-+ pinctrl_i2c3: i2c3grp {
-+ fsl,pins = <
-+ MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1
-+ MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1
-+ >;
-+ };
-+
-+ pinctrl_pwm4: pwm4grp {
-+ fsl,pins = <
-+ MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x1b0b1
-+ >;
-+ };
-+
-+ pinctrl_uart1: uart1grp {
-+ fsl,pins = <
-+ MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1
-+ MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA 0x1b0b1
-+ >;
-+ };
-+
-+ pinctrl_uart2: uart2grp {
-+ fsl,pins = <
-+ MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1
-+ MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1
-+ >;
-+ };
-+
-+ pinctrl_uart5: uart5grp {
-+ fsl,pins = <
-+ MX6QDL_PAD_KEY_COL1__UART5_TX_DATA 0x1b0b1
-+ MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA 0x1b0b1
-+ >;
-+ };
-+
-+ pinctrl_usbotg: usbotggrp {
-+ fsl,pins = <
-+ MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059
-+ >;
-+ };
-+
-+ pinctrl_usdhc3: usdhc3grp {
-+ fsl,pins = <
-+ MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059
-+ MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059
-+ MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059
-+ MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059
-+ MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059
-+ MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
-+ >;
-+ };
-+ };
-+};
-+
-+&ldb {
-+ status = "okay";
-+
-+ lvds-channel@0 {
-+ fsl,data-mapping = "spwg";
-+ fsl,data-width = <18>;
-+ status = "okay";
-+
-+ display-timings {
-+ native-mode = <&timing0>;
-+ timing0: hsd100pxn1 {
-+ clock-frequency = <65000000>;
-+ hactive = <1024>;
-+ vactive = <768>;
-+ hback-porch = <220>;
-+ hfront-porch = <40>;
-+ vback-porch = <21>;
-+ vfront-porch = <7>;
-+ hsync-len = <60>;
-+ vsync-len = <10>;
-+ };
-+ };
-+ };
-+};
-+
-+&pcie {
-+ reset-gpio = <&gpio1 29 0>;
-+ status = "okay";
-+
-+ eth1: sky2@8 { /* MAC/PHY on bus 8 */
-+ compatible = "marvell,sky2";
-+ };
-+};
-+
-+&pwm4 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_pwm4>;
-+ status = "okay";
-+};
-+
-+&ssi1 {
-+ fsl,mode = "i2s-slave";
-+ status = "okay";
-+};
-+
-+&ssi2 {
-+ fsl,mode = "i2s-slave";
-+ status = "okay";
-+};
-+
-+&uart1 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_uart1>;
-+ status = "okay";
-+};
-+
-+&uart2 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_uart2>;
-+ status = "okay";
-+};
-+
-+&uart5 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_uart5>;
-+ status = "okay";
-+};
-+
-+&usbotg {
-+ vbus-supply = <&reg_usb_otg_vbus>;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_usbotg>;
-+ disable-over-current;
-+ status = "okay";
-+};
-+
-+&usbh1 {
-+ vbus-supply = <&reg_usb_h1_vbus>;
-+ status = "okay";
-+};
-+
-+&usdhc3 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_usdhc3>;
-+ cd-gpios = <&gpio7 0 0>;
-+ vmmc-supply = <&reg_3p3v>;
-+ status = "okay";
-+};
diff --git a/target/linux/imx6/patches-3.14/0004-ARM-dts-imx6dl-enable-cpufreq-support.patch b/target/linux/imx6/patches-3.14/0004-ARM-dts-imx6dl-enable-cpufreq-support.patch
deleted file mode 100644
index 6f07cdd277..0000000000
--- a/target/linux/imx6/patches-3.14/0004-ARM-dts-imx6dl-enable-cpufreq-support.patch
+++ /dev/null
@@ -1,42 +0,0 @@
-From 978ed904c17cd39700a5e1f95ee29ef4fee08ce9 Mon Sep 17 00:00:00 2001
-From: Anson Huang <b20788@freescale.com>
-Date: Thu, 19 Dec 2013 10:02:10 -0500
-Subject: [PATCH] ARM: dts: imx6dl: enable cpufreq support
-
-This patch adds cpufreq dts for i.mx6dl to support cpufreq driver.
-
-Signed-off-by: Anson Huang <b20788@freescale.com>
-Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
----
- arch/arm/boot/dts/imx6dl.dtsi | 20 ++++++++++++++++++++
- 1 file changed, 20 insertions(+)
-
---- a/arch/arm/boot/dts/imx6dl.dtsi
-+++ b/arch/arm/boot/dts/imx6dl.dtsi
-@@ -21,6 +21,26 @@
- device_type = "cpu";
- reg = <0>;
- next-level-cache = <&L2>;
-+ operating-points = <
-+ /* kHz uV */
-+ 996000 1275000
-+ 792000 1175000
-+ 396000 1075000
-+ >;
-+ fsl,soc-operating-points = <
-+ /* ARM kHz SOC-PU uV */
-+ 996000 1175000
-+ 792000 1175000
-+ 396000 1175000
-+ >;
-+ clock-latency = <61036>; /* two CLK32 periods */
-+ clocks = <&clks 104>, <&clks 6>, <&clks 16>,
-+ <&clks 17>, <&clks 170>;
-+ clock-names = "arm", "pll2_pfd2_396m", "step",
-+ "pll1_sw", "pll1_sys";
-+ arm-supply = <&reg_arm>;
-+ pu-supply = <&reg_pu>;
-+ soc-supply = <&reg_soc>;
- };
-
- cpu@1 {
diff --git a/target/linux/imx6/patches-3.14/0005-PCI-designware-Use-new-OF-interrupt-mapping-when-pos.patch b/target/linux/imx6/patches-3.14/0005-PCI-designware-Use-new-OF-interrupt-mapping-when-pos.patch
deleted file mode 100644
index 19db40451d..0000000000
--- a/target/linux/imx6/patches-3.14/0005-PCI-designware-Use-new-OF-interrupt-mapping-when-pos.patch
+++ /dev/null
@@ -1,64 +0,0 @@
-From 804f57b1a63c7435fe43b36942581cc6c79ebb5c Mon Sep 17 00:00:00 2001
-From: Lucas Stach <l.stach@pengutronix.de>
-Date: Wed, 5 Mar 2014 14:25:51 +0100
-Subject: [PATCH] PCI: designware: Use new OF interrupt mapping when possible
-
-Use new OF interrupt mapping (of_irq_parse_and_map_pci()) when possible.
-This is the recommended method of doing the IRQ mapping. For old
-devicetrees we fall back to the previous practice.
-
-This makes INTB, INTC, and INTD work on i.MX.
-
-Tested-by: Tim Harvey <tharvey@gateworks.com>
-Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
-Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
-Reviewed-by: Marek Vasut <marex@denx.de>
-Acked-by: Arnd Bergmann <arnd@arndb.de>
-Acked-by: Jingoo Han <jg1.han@samsung.com>
----
- drivers/pci/host/pcie-designware.c | 12 +++++++++---
- 1 file changed, 9 insertions(+), 3 deletions(-)
-
---- a/drivers/pci/host/pcie-designware.c
-+++ b/drivers/pci/host/pcie-designware.c
-@@ -17,6 +17,7 @@
- #include <linux/module.h>
- #include <linux/msi.h>
- #include <linux/of_address.h>
-+#include <linux/of_pci.h>
- #include <linux/pci.h>
- #include <linux/pci_regs.h>
- #include <linux/types.h>
-@@ -492,7 +493,7 @@ int __init dw_pcie_host_init(struct pcie
- dw_pci.nr_controllers = 1;
- dw_pci.private_data = (void **)&pp;
-
-- pci_common_init(&dw_pci);
-+ pci_common_init_dev(pp->dev, &dw_pci);
- pci_assign_unassigned_resources();
- #ifdef CONFIG_PCI_DOMAINS
- dw_pci.domain++;
-@@ -725,7 +726,7 @@ static struct pci_bus *dw_pcie_scan_bus(
-
- if (pp) {
- pp->root_bus_nr = sys->busnr;
-- bus = pci_scan_root_bus(NULL, sys->busnr, &dw_pcie_ops,
-+ bus = pci_scan_root_bus(pp->dev, sys->busnr, &dw_pcie_ops,
- sys, &sys->resources);
- } else {
- bus = NULL;
-@@ -738,8 +739,13 @@ static struct pci_bus *dw_pcie_scan_bus(
- static int dw_pcie_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
- {
- struct pcie_port *pp = sys_to_pcie(dev->bus->sysdata);
-+ int irq;
-
-- return pp->irq;
-+ irq = of_irq_parse_and_map_pci(dev, slot, pin);
-+ if (!irq)
-+ irq = pp->irq;
-+
-+ return irq;
- }
-
- static void dw_pcie_add_bus(struct pci_bus *bus)
diff --git a/target/linux/imx6/patches-3.14/0006-ARM-dts-imx6-add-PCIe-interrupt-mapping-properties.patch b/target/linux/imx6/patches-3.14/0006-ARM-dts-imx6-add-PCIe-interrupt-mapping-properties.patch
deleted file mode 100644
index ade85fc290..0000000000
--- a/target/linux/imx6/patches-3.14/0006-ARM-dts-imx6-add-PCIe-interrupt-mapping-properties.patch
+++ /dev/null
@@ -1,38 +0,0 @@
-From 07134a365f1c4be6e840a00ae452d1593f15c5fc Mon Sep 17 00:00:00 2001
-From: Lucas Stach <l.stach@pengutronix.de>
-Date: Wed, 5 Mar 2014 14:25:50 +0100
-Subject: [PATCH] ARM: dts: imx6: add PCIe interrupt mapping properties
-
-As defined by the common PCI bindings.
-
-Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
-Acked-by: Arnd Bergmann <arnd@arndb.de>
-Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
----
- arch/arm/boot/dts/imx6qdl.dtsi | 8 ++++++++
- 1 file changed, 8 insertions(+)
-
---- a/arch/arm/boot/dts/imx6qdl.dtsi
-+++ b/arch/arm/boot/dts/imx6qdl.dtsi
-@@ -10,6 +10,8 @@
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-+#include <dt-bindings/interrupt-controller/arm-gic.h>
-+
- #include "skeleton.dtsi"
-
- / {
-@@ -127,6 +129,12 @@
- 0x82000000 0 0x01000000 0x01000000 0 0x00f00000>; /* non-prefetchable memory */
- num-lanes = <1>;
- interrupts = <0 123 0x04>;
-+ #interrupt-cells = <1>;
-+ interrupt-map-mask = <0 0 0 0x7>;
-+ interrupt-map = <0 0 0 1 &intc GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
-+ <0 0 0 2 &intc GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
-+ <0 0 0 3 &intc GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
-+ <0 0 0 4 &intc GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks 189>, <&clks 187>, <&clks 206>, <&clks 144>;
- clock-names = "pcie_ref_125m", "sata_ref_100m", "lvds_gate", "pcie_axi";
- status = "disabled";
diff --git a/target/linux/imx6/patches-3.14/0007-ARM-dts-imx-drop-invalid-size-and-address-cells-prop.patch b/target/linux/imx6/patches-3.14/0007-ARM-dts-imx-drop-invalid-size-and-address-cells-prop.patch
deleted file mode 100644
index 075e4a9670..0000000000
--- a/target/linux/imx6/patches-3.14/0007-ARM-dts-imx-drop-invalid-size-and-address-cells-prop.patch
+++ /dev/null
@@ -1,42 +0,0 @@
-From 54e8eaeec1227a024373e37315770cc79d69917b Mon Sep 17 00:00:00 2001
-From: Lucas Stach <l.stach@pengutronix.de>
-Date: Fri, 28 Mar 2014 17:25:51 +0100
-Subject: [PATCH] ARM: dts: imx: drop invalid size and address cells properties
-
-Those two properties should have been set to zero, which
-is the same as not specifying them.
-
-Having address-cells set to 1 causes OF interrupt
-mapping routines to add 1 to the interrupt-cells
-property and as result fail because all calculations
-are off by one.
-
-Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
-Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
----
- arch/arm/boot/dts/imx6qdl.dtsi | 2 --
- arch/arm/boot/dts/imx6sl.dtsi | 2 --
- 2 files changed, 4 deletions(-)
-
---- a/arch/arm/boot/dts/imx6qdl.dtsi
-+++ b/arch/arm/boot/dts/imx6qdl.dtsi
-@@ -40,8 +40,6 @@
- intc: interrupt-controller@00a01000 {
- compatible = "arm,cortex-a9-gic";
- #interrupt-cells = <3>;
-- #address-cells = <1>;
-- #size-cells = <1>;
- interrupt-controller;
- reg = <0x00a01000 0x1000>,
- <0x00a00100 0x100>;
---- a/arch/arm/boot/dts/imx6sl.dtsi
-+++ b/arch/arm/boot/dts/imx6sl.dtsi
-@@ -44,8 +44,6 @@
- intc: interrupt-controller@00a01000 {
- compatible = "arm,cortex-a9-gic";
- #interrupt-cells = <3>;
-- #address-cells = <1>;
-- #size-cells = <1>;
- interrupt-controller;
- reg = <0x00a01000 0x1000>,
- <0x00a00100 0x100>;
diff --git a/target/linux/imx6/patches-3.14/0008-ARM-imx-add-speed-grading-check-for-i.mx6-soc.patch b/target/linux/imx6/patches-3.14/0008-ARM-imx-add-speed-grading-check-for-i.mx6-soc.patch
deleted file mode 100644
index 70b7014314..0000000000
--- a/target/linux/imx6/patches-3.14/0008-ARM-imx-add-speed-grading-check-for-i.mx6-soc.patch
+++ /dev/null
@@ -1,76 +0,0 @@
-From c962a0996335fae7f79e64677f47d4784b86f692 Mon Sep 17 00:00:00 2001
-From: Anson Huang <b20788@freescale.com>
-Date: Wed, 12 Feb 2014 17:57:03 +0800
-Subject: [PATCH] ARM: imx: add speed grading check for i.mx6 soc
-
-The fuse map of speed_grading[1:0] defines the max speed
-of ARM, see below the definition:
-
-2b'11: 1200000000Hz;
-2b'10: 996000000Hz;
-2b'01: 852000000Hz; -- i.MX6Q Only, exclusive with 996MHz.
-2b'00: 792000000Hz;
-
-Need to remove all illegal setpoints according to fuse
-map.
-
-Signed-off-by: Anson Huang <b20788@freescale.com>
-Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
----
- arch/arm/mach-imx/mach-imx6q.c | 26 +++++++++++++++++++++++---
- 1 file changed, 23 insertions(+), 3 deletions(-)
-
---- a/arch/arm/mach-imx/mach-imx6q.c
-+++ b/arch/arm/mach-imx/mach-imx6q.c
-@@ -219,8 +219,10 @@ static void __init imx6q_init_machine(vo
- #define OCOTP_CFG3 0x440
- #define OCOTP_CFG3_SPEED_SHIFT 16
- #define OCOTP_CFG3_SPEED_1P2GHZ 0x3
-+#define OCOTP_CFG3_SPEED_996MHZ 0x2
-+#define OCOTP_CFG3_SPEED_852MHZ 0x1
-
--static void __init imx6q_opp_check_1p2ghz(struct device *cpu_dev)
-+static void __init imx6q_opp_check_speed_grading(struct device *cpu_dev)
- {
- struct device_node *np;
- void __iomem *base;
-@@ -238,11 +240,29 @@ static void __init imx6q_opp_check_1p2gh
- goto put_node;
- }
-
-+ /*
-+ * SPEED_GRADING[1:0] defines the max speed of ARM:
-+ * 2b'11: 1200000000Hz;
-+ * 2b'10: 996000000Hz;
-+ * 2b'01: 852000000Hz; -- i.MX6Q Only, exclusive with 996MHz.
-+ * 2b'00: 792000000Hz;
-+ * We need to set the max speed of ARM according to fuse map.
-+ */
- val = readl_relaxed(base + OCOTP_CFG3);
- val >>= OCOTP_CFG3_SPEED_SHIFT;
-- if ((val & 0x3) != OCOTP_CFG3_SPEED_1P2GHZ)
-+ val &= 0x3;
-+
-+ if (val != OCOTP_CFG3_SPEED_1P2GHZ)
- if (dev_pm_opp_disable(cpu_dev, 1200000000))
- pr_warn("failed to disable 1.2 GHz OPP\n");
-+ if (val < OCOTP_CFG3_SPEED_996MHZ)
-+ if (dev_pm_opp_disable(cpu_dev, 996000000))
-+ pr_warn("failed to disable 996 MHz OPP\n");
-+ if (cpu_is_imx6q()) {
-+ if (val != OCOTP_CFG3_SPEED_852MHZ)
-+ if (dev_pm_opp_disable(cpu_dev, 852000000))
-+ pr_warn("failed to disable 852 MHz OPP\n");
-+ }
-
- put_node:
- of_node_put(np);
-@@ -268,7 +288,7 @@ static void __init imx6q_opp_init(void)
- goto put_node;
- }
-
-- imx6q_opp_check_1p2ghz(cpu_dev);
-+ imx6q_opp_check_speed_grading(cpu_dev);
-
- put_node:
- of_node_put(np);
diff --git a/target/linux/imx6/patches-3.14/0050-sky2-allow-mac-to-come-from-dt.patch b/target/linux/imx6/patches-3.14/0050-sky2-allow-mac-to-come-from-dt.patch
deleted file mode 100644
index bab418bf26..0000000000
--- a/target/linux/imx6/patches-3.14/0050-sky2-allow-mac-to-come-from-dt.patch
+++ /dev/null
@@ -1,69 +0,0 @@
-From: Tim Harvey <tharvey@gateworks.com>
-Subject: [PATCH] sky2: allow mac to come from dt
-
-The driver reads the mac address from the device registers which would
-need to have been programmed by the bootloader. This patch adds
-the ability to pull the mac from devicetree via the aliases/sky2 node.
-
-Signed-off-by: Tim Harvey <tharvey@gateworks.com>
----
- drivers/net/ethernet/marvell/sky2.c | 33 ++++++++++++++++++++++++++++++++-
- 1 file changed, 32 insertions(+), 1 deletion(-)
-
---- a/drivers/net/ethernet/marvell/sky2.c
-+++ b/drivers/net/ethernet/marvell/sky2.c
-@@ -44,6 +44,8 @@
- #include <linux/prefetch.h>
- #include <linux/debugfs.h>
- #include <linux/mii.h>
-+#include <linux/of_device.h>
-+#include <linux/of_net.h>
-
- #include <asm/irq.h>
-
-@@ -4748,6 +4750,7 @@ static struct net_device *sky2_init_netd
- {
- struct sky2_port *sky2;
- struct net_device *dev = alloc_etherdev(sizeof(*sky2));
-+ unsigned char *iap, tmpaddr[ETH_ALEN];
-
- if (!dev)
- return NULL;
-@@ -4805,8 +4808,36 @@ static struct net_device *sky2_init_netd
-
- dev->features |= dev->hw_features;
-
-+ /*
-+ * try to get mac address in the following order:
-+ * 1) from device tree data
-+ * 2) from internal registers set by bootloader
-+ */
-+ iap = NULL;
-+ if (IS_ENABLED(CONFIG_OF)) {
-+ struct device_node *np;
-+ np = of_find_node_by_path("/aliases");
-+ if (np) {
-+ const char *path = of_get_property(np, "sky2", NULL);
-+ if (path)
-+ np = of_find_node_by_path(path);
-+ if (np)
-+ path = of_get_mac_address(np);
-+ if (path)
-+ iap = (unsigned char *) path;
-+ }
-+ }
-+
-+ /*
-+ * 2) mac registers set by bootloader
-+ */
-+ if (!iap || !is_valid_ether_addr(iap)) {
-+ memcpy_fromio(&tmpaddr, hw->regs + B2_MAC_1 + port * 8, ETH_ALEN);
-+ iap = &tmpaddr[0];
-+ }
-+
- /* read the mac address */
-- memcpy_fromio(dev->dev_addr, hw->regs + B2_MAC_1 + port * 8, ETH_ALEN);
-+ memcpy(dev->dev_addr, iap, ETH_ALEN);
-
- return dev;
- }
diff --git a/target/linux/imx6/patches-3.14/0055-pci_imx6_fix-boot-hang-when-link-already-enabled.patch b/target/linux/imx6/patches-3.14/0055-pci_imx6_fix-boot-hang-when-link-already-enabled.patch
deleted file mode 100644
index bae5a1fdf8..0000000000
--- a/target/linux/imx6/patches-3.14/0055-pci_imx6_fix-boot-hang-when-link-already-enabled.patch
+++ /dev/null
@@ -1,86 +0,0 @@
-This fixes a boot hang observed when the bootloader
-already enabled the PCIe link for it's own use. The
-fundamental problem is that Freescale forgot to wire
-up the core reset, so software doesn't have a sane way
-to get the core into a defined state.
-
-According to the DW PCIe core reference manual configuration
-of the core may only happen when the LTSSM is disabled, so
-this is one of the first things we need to do. Apparently
-this isn't safe to do when the LTSSM is in any other state
-than "detect" as we observe an instant machine hang when
-trying to do so while the link is already up.
-
-As a workaround force LTSSM into detect state right before
-hitting the disable switch.
-
-Reported-by: Fabio Estevam <fabio.estevam <at> freescale.com>
-Signed-off-by: Lucas Stach <l.stach <at> pengutronix.de>
-Acked-by: Tim Harvey <tharvey <at> gateworks.com>
---- a/drivers/pci/host/pci-imx6.c
-+++ b/drivers/pci/host/pci-imx6.c
-@@ -52,6 +52,9 @@ struct imx6_pcie {
-
- /* PCIe Port Logic registers (memory-mapped) */
- #define PL_OFFSET 0x700
-+#define PCIE_PL_PFLR (PL_OFFSET + 0x08)
-+#define PCIE_PL_PFLR_LINK_STATE_MASK (0x3f << 16)
-+#define PCIE_PL_PFLR_FORCE_LINK (1 << 15)
- #define PCIE_PHY_DEBUG_R0 (PL_OFFSET + 0x28)
- #define PCIE_PHY_DEBUG_R1 (PL_OFFSET + 0x2c)
- #define PCIE_PHY_DEBUG_R1_XMLH_LINK_IN_TRAINING (1 << 29)
-@@ -217,6 +220,31 @@ static int imx6q_pcie_abort_handler(unsi
- static int imx6_pcie_assert_core_reset(struct pcie_port *pp)
- {
- struct imx6_pcie *imx6_pcie = to_imx6_pcie(pp);
-+ u32 val, gpr1, gpr12;
-+
-+ /*
-+ * If the bootloader already enabled the link we need some special
-+ * handling to get the core back into a state where it is safe to
-+ * touch it for configuration. As there is no dedicated reset signal
-+ * wired up for MX6QDL, we need to manually force LTSSM into "detect"
-+ * state before completely disabling LTSSM, which is a prerequisite
-+ * for core configuration.
-+ * If both LTSSM_ENABLE and REF_SSP_ENABLE are active we have a strong
-+ * indication that the bootloader activated the link.
-+ */
-+ regmap_read(imx6_pcie->iomuxc_gpr, IOMUXC_GPR1, &gpr1);
-+ regmap_read(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12, &gpr12);
-+
-+ if ((gpr1 & IMX6Q_GPR1_PCIE_REF_CLK_EN) &&
-+ (gpr12 & IMX6Q_GPR12_PCIE_CTL_2)) {
-+ val = readl(pp->dbi_base + PCIE_PL_PFLR);
-+ val &= ~PCIE_PL_PFLR_LINK_STATE_MASK;
-+ val |= PCIE_PL_PFLR_FORCE_LINK;
-+ writel(val, pp->dbi_base + PCIE_PL_PFLR);
-+
-+ regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,
-+ IMX6Q_GPR12_PCIE_CTL_2, 0 << 10);
-+ }
-
- regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR1,
- IMX6Q_GPR1_PCIE_TEST_PD, 1 << 18);
-@@ -627,6 +655,14 @@ static int __init imx6_pcie_probe(struct
- return 0;
- }
-
-+static void imx6_pcie_shutdown(struct platform_device *pdev)
-+{
-+ struct imx6_pcie *imx6_pcie = platform_get_drvdata(pdev);
-+
-+ /* bring down link, so bootloader gets clean state in case of reboot */
-+ imx6_pcie_assert_core_reset(&imx6_pcie->pp);
-+}
-+
- static const struct of_device_id imx6_pcie_of_match[] = {
- { .compatible = "fsl,imx6q-pcie", },
- {},
-@@ -639,6 +675,7 @@ static struct platform_driver imx6_pcie_
- .owner = THIS_MODULE,
- .of_match_table = imx6_pcie_of_match,
- },
-+ .shutdown = imx6_pcie_shutdown,
- };
-
- /* Freescale PCIe driver does not allow module unload */
diff --git a/target/linux/imx6/patches-3.14/0060-pci_imx6_fix-link-failure.patch b/target/linux/imx6/patches-3.14/0060-pci_imx6_fix-link-failure.patch
deleted file mode 100644
index e416d8332d..0000000000
--- a/target/linux/imx6/patches-3.14/0060-pci_imx6_fix-link-failure.patch
+++ /dev/null
@@ -1,38 +0,0 @@
-PCI: imx6: fix occasional link failure
-
-According to the IMX6 reference manuals, REF_SSP_EN (Reference clock enable
-for SS function) must remain deasserted until the reference clock is running
-at the appropriate frequency.
-
-Without this patch we find a high link failure rate (>5%) on certain
-IMX6 boards at various temperatures.
-
-Signed-off-by: Tim Harvey <tharvey@gateworks.com>
-
---- a/drivers/pci/host/pci-imx6.c
-+++ b/drivers/pci/host/pci-imx6.c
-@@ -262,11 +262,6 @@ static int imx6_pcie_deassert_core_reset
- if (gpio_is_valid(imx6_pcie->power_on_gpio))
- gpio_set_value(imx6_pcie->power_on_gpio, 1);
-
-- regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR1,
-- IMX6Q_GPR1_PCIE_TEST_PD, 0 << 18);
-- regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR1,
-- IMX6Q_GPR1_PCIE_REF_CLK_EN, 1 << 16);
--
- ret = clk_prepare_enable(imx6_pcie->sata_ref_100m);
- if (ret) {
- dev_err(pp->dev, "unable to enable sata_ref_100m\n");
-@@ -294,6 +289,12 @@ static int imx6_pcie_deassert_core_reset
- /* allow the clocks to stabilize */
- usleep_range(200, 500);
-
-+ /* power up core phy and enable ref clock */
-+ regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR1,
-+ IMX6Q_GPR1_PCIE_TEST_PD, 0 << 18);
-+ regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR1,
-+ IMX6Q_GPR1_PCIE_REF_CLK_EN, 1 << 16);
-+
- /* Some boards don't have PCIe reset GPIO. */
- if (gpio_is_valid(imx6_pcie->reset_gpio)) {
- gpio_set_value(imx6_pcie->reset_gpio, 0);
diff --git a/target/linux/imx6/patches-3.14/100-bootargs.patch b/target/linux/imx6/patches-3.14/100-bootargs.patch
deleted file mode 100644
index 0954391203..0000000000
--- a/target/linux/imx6/patches-3.14/100-bootargs.patch
+++ /dev/null
@@ -1,11 +0,0 @@
---- a/arch/arm/boot/dts/imx6dl-wandboard.dts
-+++ b/arch/arm/boot/dts/imx6dl-wandboard.dts
-@@ -19,4 +19,8 @@
- memory {
- reg = <0x10000000 0x40000000>;
- };
-+
-+ chosen {
-+ bootargs = "console=ttymxc0,115200";
-+ };
- };
diff --git a/target/linux/imx6/patches-3.14/200-pci_designware_add-ability-for-custom-swizzle.patch b/target/linux/imx6/patches-3.14/200-pci_designware_add-ability-for-custom-swizzle.patch
deleted file mode 100644
index b174376860..0000000000
--- a/target/linux/imx6/patches-3.14/200-pci_designware_add-ability-for-custom-swizzle.patch
+++ /dev/null
@@ -1,33 +0,0 @@
-commit e84634dc6c7f3f6af9b8ef1fb36f0d85c476ab95
-Author: Tim Harvey <tharvey@gateworks.com>
-Date: Thu Feb 27 01:02:23 2014 -0800
-
- PCI: designware: add ability for custom swizzle
-
- Add the ability for a platform driver to provide a platform-specific
- swizzle function.
-
- Signed-off-by: Tim Harvey <tharvey@gateworks.com>
-
---- a/drivers/pci/host/pcie-designware.c
-+++ b/drivers/pci/host/pcie-designware.c
-@@ -481,6 +481,9 @@ int __init dw_pcie_host_init(struct pcie
- if (pp->ops->host_init)
- pp->ops->host_init(pp);
-
-+ if (pp->swizzle)
-+ dw_pci.swizzle = pp->swizzle;
-+
- dw_pcie_wr_own_conf(pp, PCI_BASE_ADDRESS_0, 4, 0);
-
- /* program correct class for RC */
---- a/drivers/pci/host/pcie-designware.h
-+++ b/drivers/pci/host/pcie-designware.h
-@@ -53,6 +53,7 @@ struct pcie_port {
- struct irq_domain *irq_domain;
- unsigned long msi_data;
- DECLARE_BITMAP(msi_irq_in_use, MAX_MSI_IRQS);
-+ u8 (*swizzle)(struct pci_dev *, u8 *);
- };
-
- struct pcie_host_ops {
diff --git a/target/linux/imx6/patches-3.14/201-pci_imx6_ventana_fixup-for-IRQ-mismapping.patch b/target/linux/imx6/patches-3.14/201-pci_imx6_ventana_fixup-for-IRQ-mismapping.patch
deleted file mode 100644
index c8e2a0e0e3..0000000000
--- a/target/linux/imx6/patches-3.14/201-pci_imx6_ventana_fixup-for-IRQ-mismapping.patch
+++ /dev/null
@@ -1,81 +0,0 @@
-commit 2c0d0491438433a1f327f2e754c7b6b55fec51c4
-Author: Tim Harvey <tharvey@gateworks.com>
-Date: Thu Feb 27 00:59:53 2014 -0800
-
- PCI: imx6: ventana: fixup for IRQ mismapping
-
- The TI XIO2001 PCIe-to-PCI bridge used on several Ventana expansion boards
- has its slot-to-bridge IRQ mapping reversed from the PCI specification:
-
- INTA->INTD
- INTB->INTC
- INTC->INTB
- INTD->INTA
-
- Implement a custom swizzle function that does a fixup on the interrupt for
- devices on a TI XIO2001 bridge.
-
- Signed-off-by: Tim Harvey <tharvey@gateworks.com>
-
---- a/drivers/pci/host/pci-imx6.c
-+++ b/drivers/pci/host/pci-imx6.c
-@@ -540,6 +540,39 @@ static int imx6_add_pcie_port(struct pci
- return 0;
- }
-
-+/* TI XIO2001 PCIe-to-PCI bridge on GW16082 exp card has IRQs reversed */
-+u8 ventana_swizzle(struct pci_dev *dev, u8 *pin)
-+{
-+ u8 i = 0;
-+ struct pci_dev *pdev = dev;
-+
-+ /* count number of TI XIO2001 bridges on bus */
-+ while (!pci_is_root_bus(pdev->bus)) {
-+ if (pdev->bus && pdev->bus->self &&
-+ (pdev->bus->self->vendor == PCI_VENDOR_ID_TI) &&
-+ (pdev->bus->self->device == PCI_DEVICE_ID_TI_XIO2001)) {
-+ i++;
-+ }
-+ pdev = pdev->bus->self;
-+ }
-+ while (!pci_is_root_bus(dev->bus)) {
-+ /* if we are directly downstream from 1st TI XIO2001 bridge */
-+ if (dev->bus && dev->bus->self &&
-+ (dev->bus->self->vendor == PCI_VENDOR_ID_TI) &&
-+ (dev->bus->self->device == PCI_DEVICE_ID_TI_XIO2001)) {
-+ if (--i == 0) {
-+ /* swap IRQs and swizzle backwards */
-+ *pin = (15 - PCI_SLOT(dev->devfn)) + 1;
-+ dev = dev->bus->self;
-+ continue;
-+ }
-+ }
-+ *pin = pci_swizzle_interrupt_pin(dev, *pin);
-+ dev = dev->bus->self;
-+ }
-+ return PCI_SLOT(dev->devfn);
-+}
-+
- static int __init imx6_pcie_probe(struct platform_device *pdev)
- {
- struct imx6_pcie *imx6_pcie;
-@@ -648,6 +681,9 @@ static int __init imx6_pcie_probe(struct
- return PTR_ERR(imx6_pcie->iomuxc_gpr);
- }
-
-+ if (of_machine_is_compatible("gw,ventana"))
-+ pp->swizzle = ventana_swizzle;
-+
- ret = imx6_add_pcie_port(pp, pdev);
- if (ret < 0)
- return ret;
---- a/include/linux/pci_ids.h
-+++ b/include/linux/pci_ids.h
-@@ -822,6 +822,7 @@
- #define PCI_DEVICE_ID_TI_XX12 0x8039
- #define PCI_DEVICE_ID_TI_XX12_FM 0x803b
- #define PCI_DEVICE_ID_TI_XIO2000A 0x8231
-+#define PCI_DEVICE_ID_TI_XIO2001 0x8240
- #define PCI_DEVICE_ID_TI_1130 0xac12
- #define PCI_DEVICE_ID_TI_1031 0xac13
- #define PCI_DEVICE_ID_TI_1131 0xac15
diff --git a/target/linux/imx6/patches-3.14/202-net-igb-add-i210-i211-support-for-phy-read-write.patch b/target/linux/imx6/patches-3.14/202-net-igb-add-i210-i211-support-for-phy-read-write.patch
deleted file mode 100644
index 9de5dfe44a..0000000000
--- a/target/linux/imx6/patches-3.14/202-net-igb-add-i210-i211-support-for-phy-read-write.patch
+++ /dev/null
@@ -1,129 +0,0 @@
-Author: Tim Harvey <tharvey@gateworks.com>
-Date: Thu May 15 00:12:26 2014 -0700
-
- net: igb: add i210/i211 support for phy read/write
-
- The i210/i211 uses the MDICNFG register for the phy address instead of the
- MDIC register.
-
- Signed-off-by: Tim Harvey <tharvey@gateworks.com>
-
---- a/drivers/net/ethernet/intel/igb/e1000_phy.c
-+++ b/drivers/net/ethernet/intel/igb/e1000_phy.c
-@@ -139,7 +139,7 @@ out:
- s32 igb_read_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 *data)
- {
- struct e1000_phy_info *phy = &hw->phy;
-- u32 i, mdic = 0;
-+ u32 i, mdicnfg, mdic = 0;
- s32 ret_val = 0;
-
- if (offset > MAX_PHY_REG_ADDRESS) {
-@@ -152,11 +152,25 @@ s32 igb_read_phy_reg_mdic(struct e1000_h
- * Control register. The MAC will take care of interfacing with the
- * PHY to retrieve the desired data.
- */
-- mdic = ((offset << E1000_MDIC_REG_SHIFT) |
-- (phy->addr << E1000_MDIC_PHY_SHIFT) |
-- (E1000_MDIC_OP_READ));
-+ switch (hw->mac.type) {
-+ case e1000_i210:
-+ case e1000_i211:
-+ mdicnfg = rd32(E1000_MDICNFG);
-+ mdicnfg &= ~(E1000_MDICNFG_PHY_MASK);
-+ mdicnfg |= (phy->addr << E1000_MDICNFG_PHY_SHIFT);
-+ wr32(E1000_MDICNFG, mdicnfg);
-+ mdic = ((offset << E1000_MDIC_REG_SHIFT) |
-+ (E1000_MDIC_OP_READ));
-+ break;
-+ default:
-+ mdic = ((offset << E1000_MDIC_REG_SHIFT) |
-+ (phy->addr << E1000_MDIC_PHY_SHIFT) |
-+ (E1000_MDIC_OP_READ));
-+ break;
-+ }
-
- wr32(E1000_MDIC, mdic);
-+ wrfl();
-
- /* Poll the ready bit to see if the MDI read completed
- * Increasing the time out as testing showed failures with
-@@ -181,6 +195,18 @@ s32 igb_read_phy_reg_mdic(struct e1000_h
- *data = (u16) mdic;
-
- out:
-+ switch (hw->mac.type) {
-+ /* restore MDICNFG to have phy's addr */
-+ case e1000_i210:
-+ case e1000_i211:
-+ mdicnfg = rd32(E1000_MDICNFG);
-+ mdicnfg &= ~(E1000_MDICNFG_PHY_MASK);
-+ mdicnfg |= (hw->phy.addr << E1000_MDICNFG_PHY_SHIFT);
-+ wr32(E1000_MDICNFG, mdicnfg);
-+ break;
-+ default:
-+ break;
-+ }
- return ret_val;
- }
-
-@@ -195,7 +221,7 @@ out:
- s32 igb_write_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 data)
- {
- struct e1000_phy_info *phy = &hw->phy;
-- u32 i, mdic = 0;
-+ u32 i, mdicnfg, mdic = 0;
- s32 ret_val = 0;
-
- if (offset > MAX_PHY_REG_ADDRESS) {
-@@ -208,12 +234,27 @@ s32 igb_write_phy_reg_mdic(struct e1000_
- * Control register. The MAC will take care of interfacing with the
- * PHY to retrieve the desired data.
- */
-- mdic = (((u32)data) |
-- (offset << E1000_MDIC_REG_SHIFT) |
-- (phy->addr << E1000_MDIC_PHY_SHIFT) |
-- (E1000_MDIC_OP_WRITE));
-+ switch (hw->mac.type) {
-+ case e1000_i210:
-+ case e1000_i211:
-+ mdicnfg = rd32(E1000_MDICNFG);
-+ mdicnfg &= ~(E1000_MDICNFG_PHY_MASK);
-+ mdicnfg |= (phy->addr << E1000_MDICNFG_PHY_SHIFT);
-+ wr32(E1000_MDICNFG, mdicnfg);
-+ mdic = (((u32)data) |
-+ (offset << E1000_MDIC_REG_SHIFT) |
-+ (E1000_MDIC_OP_WRITE));
-+ break;
-+ default:
-+ mdic = (((u32)data) |
-+ (offset << E1000_MDIC_REG_SHIFT) |
-+ (phy->addr << E1000_MDIC_PHY_SHIFT) |
-+ (E1000_MDIC_OP_WRITE));
-+ break;
-+ }
-
- wr32(E1000_MDIC, mdic);
-+ wrfl();
-
- /* Poll the ready bit to see if the MDI read completed
- * Increasing the time out as testing showed failures with
-@@ -237,6 +278,18 @@ s32 igb_write_phy_reg_mdic(struct e1000_
- }
-
- out:
-+ switch (hw->mac.type) {
-+ /* restore MDICNFG to have phy's addr */
-+ case e1000_i210:
-+ case e1000_i211:
-+ mdicnfg = rd32(E1000_MDICNFG);
-+ mdicnfg &= ~(E1000_MDICNFG_PHY_MASK);
-+ mdicnfg |= (hw->phy.addr << E1000_MDICNFG_PHY_SHIFT);
-+ wr32(E1000_MDICNFG, mdicnfg);
-+ break;
-+ default:
-+ break;
-+ }
- return ret_val;
- }
-
diff --git a/target/linux/imx6/patches-3.14/203-net-igb-add-phy-read-write-functions-that-accept-phy.patch b/target/linux/imx6/patches-3.14/203-net-igb-add-phy-read-write-functions-that-accept-phy.patch
deleted file mode 100644
index b6688db9ac..0000000000
--- a/target/linux/imx6/patches-3.14/203-net-igb-add-phy-read-write-functions-that-accept-phy.patch
+++ /dev/null
@@ -1,255 +0,0 @@
-Author: Tim Harvey <tharvey@gateworks.com>
-Date: Thu May 15 00:29:18 2014 -0700
-
- net: igb: add phy read/write functions that accept phy addr
-
- Add igb_write_reg_gs40g/igb_read_reg_gs40g that can be passed a phy address.
- The existing igb_write_phy_reg_gs40g/igb_read_phy_reg_gs40g become wrappers
- to this function.
-
- Signed-off-by: Tim Harvey <tharvey@gateworks.com>
-
---- a/drivers/net/ethernet/intel/igb/e1000_82575.c
-+++ b/drivers/net/ethernet/intel/igb/e1000_82575.c
-@@ -2142,7 +2142,7 @@ static s32 igb_read_phy_reg_82580(struct
- if (ret_val)
- goto out;
-
-- ret_val = igb_read_phy_reg_mdic(hw, offset, data);
-+ ret_val = igb_read_phy_reg_mdic(hw, hw->phy.addr, offset, data);
-
- hw->phy.ops.release(hw);
-
-@@ -2167,7 +2167,7 @@ static s32 igb_write_phy_reg_82580(struc
- if (ret_val)
- goto out;
-
-- ret_val = igb_write_phy_reg_mdic(hw, offset, data);
-+ ret_val = igb_write_phy_reg_mdic(hw, hw->phy.addr, offset, data);
-
- hw->phy.ops.release(hw);
-
---- a/drivers/net/ethernet/intel/igb/e1000_phy.c
-+++ b/drivers/net/ethernet/intel/igb/e1000_phy.c
-@@ -136,9 +136,8 @@ out:
- * Reads the MDI control regsiter in the PHY at offset and stores the
- * information read to data.
- **/
--s32 igb_read_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 *data)
-+s32 igb_read_phy_reg_mdic(struct e1000_hw *hw, u8 addr, u32 offset, u16 *data)
- {
-- struct e1000_phy_info *phy = &hw->phy;
- u32 i, mdicnfg, mdic = 0;
- s32 ret_val = 0;
-
-@@ -157,14 +156,14 @@ s32 igb_read_phy_reg_mdic(struct e1000_h
- case e1000_i211:
- mdicnfg = rd32(E1000_MDICNFG);
- mdicnfg &= ~(E1000_MDICNFG_PHY_MASK);
-- mdicnfg |= (phy->addr << E1000_MDICNFG_PHY_SHIFT);
-+ mdicnfg |= (addr << E1000_MDICNFG_PHY_SHIFT);
- wr32(E1000_MDICNFG, mdicnfg);
- mdic = ((offset << E1000_MDIC_REG_SHIFT) |
- (E1000_MDIC_OP_READ));
- break;
- default:
- mdic = ((offset << E1000_MDIC_REG_SHIFT) |
-- (phy->addr << E1000_MDIC_PHY_SHIFT) |
-+ (addr << E1000_MDIC_PHY_SHIFT) |
- (E1000_MDIC_OP_READ));
- break;
- }
-@@ -218,9 +217,8 @@ out:
- *
- * Writes data to MDI control register in the PHY at offset.
- **/
--s32 igb_write_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 data)
-+s32 igb_write_phy_reg_mdic(struct e1000_hw *hw, u8 addr, u32 offset, u16 data)
- {
-- struct e1000_phy_info *phy = &hw->phy;
- u32 i, mdicnfg, mdic = 0;
- s32 ret_val = 0;
-
-@@ -239,7 +237,7 @@ s32 igb_write_phy_reg_mdic(struct e1000_
- case e1000_i211:
- mdicnfg = rd32(E1000_MDICNFG);
- mdicnfg &= ~(E1000_MDICNFG_PHY_MASK);
-- mdicnfg |= (phy->addr << E1000_MDICNFG_PHY_SHIFT);
-+ mdicnfg |= (addr << E1000_MDICNFG_PHY_SHIFT);
- wr32(E1000_MDICNFG, mdicnfg);
- mdic = (((u32)data) |
- (offset << E1000_MDIC_REG_SHIFT) |
-@@ -248,7 +246,7 @@ s32 igb_write_phy_reg_mdic(struct e1000_
- default:
- mdic = (((u32)data) |
- (offset << E1000_MDIC_REG_SHIFT) |
-- (phy->addr << E1000_MDIC_PHY_SHIFT) |
-+ (addr << E1000_MDIC_PHY_SHIFT) |
- (E1000_MDIC_OP_WRITE));
- break;
- }
-@@ -539,7 +537,7 @@ s32 igb_read_phy_reg_igp(struct e1000_hw
- goto out;
-
- if (offset > MAX_PHY_MULTI_PAGE_REG) {
-- ret_val = igb_write_phy_reg_mdic(hw,
-+ ret_val = igb_write_phy_reg_mdic(hw, hw->phy.addr,
- IGP01E1000_PHY_PAGE_SELECT,
- (u16)offset);
- if (ret_val) {
-@@ -548,8 +546,8 @@ s32 igb_read_phy_reg_igp(struct e1000_hw
- }
- }
-
-- ret_val = igb_read_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & offset,
-- data);
-+ ret_val = igb_read_phy_reg_mdic(hw, hw->phy.addr,
-+ MAX_PHY_REG_ADDRESS & offset, data);
-
- hw->phy.ops.release(hw);
-
-@@ -578,7 +576,7 @@ s32 igb_write_phy_reg_igp(struct e1000_h
- goto out;
-
- if (offset > MAX_PHY_MULTI_PAGE_REG) {
-- ret_val = igb_write_phy_reg_mdic(hw,
-+ ret_val = igb_write_phy_reg_mdic(hw, hw->phy.addr,
- IGP01E1000_PHY_PAGE_SELECT,
- (u16)offset);
- if (ret_val) {
-@@ -587,8 +585,8 @@ s32 igb_write_phy_reg_igp(struct e1000_h
- }
- }
-
-- ret_val = igb_write_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & offset,
-- data);
-+ ret_val = igb_write_phy_reg_mdic(hw, hw->phy.addr,
-+ MAX_PHY_REG_ADDRESS & offset, data);
-
- hw->phy.ops.release(hw);
-
-@@ -2554,8 +2552,9 @@ out:
- }
-
- /**
-- * igb_write_phy_reg_gs40g - Write GS40G PHY register
-+ * igb_write_reg_gs40g - Write GS40G PHY register
- * @hw: pointer to the HW structure
-+ * @addr: phy address to write to
- * @offset: lower half is register offset to write to
- * upper half is page to use.
- * @data: data to write at register offset
-@@ -2563,7 +2562,7 @@ out:
- * Acquires semaphore, if necessary, then writes the data to PHY register
- * at the offset. Release any acquired semaphores before exiting.
- **/
--s32 igb_write_phy_reg_gs40g(struct e1000_hw *hw, u32 offset, u16 data)
-+s32 igb_write_reg_gs40g(struct e1000_hw *hw, u8 addr, u32 offset, u16 data)
- {
- s32 ret_val;
- u16 page = offset >> GS40G_PAGE_SHIFT;
-@@ -2573,10 +2572,10 @@ s32 igb_write_phy_reg_gs40g(struct e1000
- if (ret_val)
- return ret_val;
-
-- ret_val = igb_write_phy_reg_mdic(hw, GS40G_PAGE_SELECT, page);
-+ ret_val = igb_write_phy_reg_mdic(hw, addr, GS40G_PAGE_SELECT, page);
- if (ret_val)
- goto release;
-- ret_val = igb_write_phy_reg_mdic(hw, offset, data);
-+ ret_val = igb_write_phy_reg_mdic(hw, addr, offset, data);
-
- release:
- hw->phy.ops.release(hw);
-@@ -2584,8 +2583,24 @@ release:
- }
-
- /**
-- * igb_read_phy_reg_gs40g - Read GS40G PHY register
-+ * igb_write_phy_reg_gs40g - Write GS40G PHY register
-+ * @hw: pointer to the HW structure
-+ * @offset: lower half is register offset to write to
-+ * upper half is page to use.
-+ * @data: data to write at register offset
-+ *
-+ * Acquires semaphore, if necessary, then writes the data to PHY register
-+ * at the offset. Release any acquired semaphores before exiting.
-+ **/
-+s32 igb_write_phy_reg_gs40g(struct e1000_hw *hw, u32 offset, u16 data)
-+{
-+ return igb_write_reg_gs40g(hw, hw->phy.addr, offset, data);
-+}
-+
-+/**
-+ * igb_read_reg_gs40g - Read GS40G PHY register
- * @hw: pointer to the HW structure
-+ * @addr: phy address to read from
- * @offset: lower half is register offset to read to
- * upper half is page to use.
- * @data: data to read at register offset
-@@ -2593,7 +2608,7 @@ release:
- * Acquires semaphore, if necessary, then reads the data in the PHY register
- * at the offset. Release any acquired semaphores before exiting.
- **/
--s32 igb_read_phy_reg_gs40g(struct e1000_hw *hw, u32 offset, u16 *data)
-+s32 igb_read_reg_gs40g(struct e1000_hw *hw, u8 addr, u32 offset, u16 *data)
- {
- s32 ret_val;
- u16 page = offset >> GS40G_PAGE_SHIFT;
-@@ -2603,10 +2618,10 @@ s32 igb_read_phy_reg_gs40g(struct e1000_
- if (ret_val)
- return ret_val;
-
-- ret_val = igb_write_phy_reg_mdic(hw, GS40G_PAGE_SELECT, page);
-+ ret_val = igb_write_phy_reg_mdic(hw, addr, GS40G_PAGE_SELECT, page);
- if (ret_val)
- goto release;
-- ret_val = igb_read_phy_reg_mdic(hw, offset, data);
-+ ret_val = igb_read_phy_reg_mdic(hw, addr, offset, data);
-
- release:
- hw->phy.ops.release(hw);
-@@ -2614,6 +2629,21 @@ release:
- }
-
- /**
-+ * igb_read_phy_reg_gs40g - Read GS40G PHY register
-+ * @hw: pointer to the HW structure
-+ * @offset: lower half is register offset to read to
-+ * upper half is page to use.
-+ * @data: data to read at register offset
-+ *
-+ * Acquires semaphore, if necessary, then reads the data in the PHY register
-+ * at the offset. Release any acquired semaphores before exiting.
-+ **/
-+s32 igb_read_phy_reg_gs40g(struct e1000_hw *hw, u32 offset, u16 *data)
-+{
-+ return igb_read_reg_gs40g(hw, hw->phy.addr, offset, data);
-+}
-+
-+/**
- * igb_set_master_slave_mode - Setup PHY for Master/slave mode
- * @hw: pointer to the HW structure
- *
---- a/drivers/net/ethernet/intel/igb/e1000_phy.h
-+++ b/drivers/net/ethernet/intel/igb/e1000_phy.h
-@@ -65,8 +65,8 @@ s32 igb_phy_has_link(struct e1000_hw *h
- void igb_power_up_phy_copper(struct e1000_hw *hw);
- void igb_power_down_phy_copper(struct e1000_hw *hw);
- s32 igb_phy_init_script_igp3(struct e1000_hw *hw);
--s32 igb_read_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 *data);
--s32 igb_write_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 data);
-+s32 igb_read_phy_reg_mdic(struct e1000_hw *hw, u8 addr, u32 offset, u16 *data);
-+s32 igb_write_phy_reg_mdic(struct e1000_hw *hw, u8 addr, u32 offset, u16 data);
- s32 igb_read_phy_reg_i2c(struct e1000_hw *hw, u32 offset, u16 *data);
- s32 igb_write_phy_reg_i2c(struct e1000_hw *hw, u32 offset, u16 data);
- s32 igb_read_sfp_data_byte(struct e1000_hw *hw, u16 offset, u8 *data);
-@@ -77,6 +77,8 @@ s32 igb_phy_force_speed_duplex_82580(st
- s32 igb_get_cable_length_82580(struct e1000_hw *hw);
- s32 igb_read_phy_reg_gs40g(struct e1000_hw *hw, u32 offset, u16 *data);
- s32 igb_write_phy_reg_gs40g(struct e1000_hw *hw, u32 offset, u16 data);
-+s32 igb_read_reg_gs40g(struct e1000_hw *hw, u8 addr, u32 offset, u16 *data);
-+s32 igb_write_reg_gs40g(struct e1000_hw *hw, u8 addr, u32 offset, u16 data);
- s32 igb_check_polarity_m88(struct e1000_hw *hw);
-
- /* IGP01E1000 Specific Registers */
diff --git a/target/linux/imx6/patches-3.14/204-net-igb-register-mii_bus-for-SerDes-w-external-phy.patch b/target/linux/imx6/patches-3.14/204-net-igb-register-mii_bus-for-SerDes-w-external-phy.patch
deleted file mode 100644
index 0bcbbd7bc3..0000000000
--- a/target/linux/imx6/patches-3.14/204-net-igb-register-mii_bus-for-SerDes-w-external-phy.patch
+++ /dev/null
@@ -1,303 +0,0 @@
-Author: Tim Harvey <tharvey@gateworks.com>
-Date: Thu May 15 12:36:23 2014 -0700
-
- net: igb: register mii_bus for SerDes w/ external phy
-
- If an i210 is configured for 1000BASE-BX link_mode and has an external phy
- specified, then register an mii bus using the external phy address as
- a mask.
-
- An i210 hooked to an external standard phy will be configured with a link_mo
- of SGMII in which case phy ops will be configured and used internall in the
- igb driver for link status. However, in certain cases one might be using a
- backplane SerDes connection to something that talks on the mdio bus but is
- not a standard phy, such as a switch. In this case by registering an mdio
- bus a phy driver can manage the device.
-
- Signed-off-by: Tim Harvey <tharvey@gateworks.com>
-
---- a/drivers/net/ethernet/intel/igb/e1000_82575.c
-+++ b/drivers/net/ethernet/intel/igb/e1000_82575.c
-@@ -606,13 +606,25 @@ static s32 igb_get_invariants_82575(stru
- switch (link_mode) {
- case E1000_CTRL_EXT_LINK_MODE_1000BASE_KX:
- hw->phy.media_type = e1000_media_type_internal_serdes;
-+ if (igb_sgmii_uses_mdio_82575(hw)) {
-+ u32 mdicnfg = rd32(E1000_MDICNFG);
-+ mdicnfg &= E1000_MDICNFG_PHY_MASK;
-+ hw->phy.addr = mdicnfg >> E1000_MDICNFG_PHY_SHIFT;
-+ hw_dbg("1000BASE_KX w/ external MDIO device at 0x%x\n",
-+ hw->phy.addr);
-+ } else {
-+ hw_dbg("1000BASE_KX");
-+ }
- break;
- case E1000_CTRL_EXT_LINK_MODE_SGMII:
- /* Get phy control interface type set (MDIO vs. I2C)*/
- if (igb_sgmii_uses_mdio_82575(hw)) {
- hw->phy.media_type = e1000_media_type_copper;
- dev_spec->sgmii_active = true;
-+ hw_dbg("SGMII with external MDIO PHY");
- break;
-+ } else {
-+ hw_dbg("SGMII with external I2C PHY");
- }
- /* fall through for I2C based SGMII */
- case E1000_CTRL_EXT_LINK_MODE_PCIE_SERDES:
-@@ -629,8 +641,11 @@ static s32 igb_get_invariants_82575(stru
- hw->phy.media_type = e1000_media_type_copper;
- dev_spec->sgmii_active = true;
- }
-+ hw_dbg("SERDES with external SFP");
-
- break;
-+ } else {
-+ hw_dbg("SERDES");
- }
-
- /* do not change link mode for 100BaseFX */
---- a/drivers/net/ethernet/intel/igb/e1000_hw.h
-+++ b/drivers/net/ethernet/intel/igb/e1000_hw.h
-@@ -32,6 +32,7 @@
- #include <linux/delay.h>
- #include <linux/io.h>
- #include <linux/netdevice.h>
-+#include <linux/phy.h>
-
- #include "e1000_regs.h"
- #include "e1000_defines.h"
-@@ -553,6 +554,12 @@ struct e1000_hw {
- struct e1000_mbx_info mbx;
- struct e1000_host_mng_dhcp_cookie mng_cookie;
-
-+#ifdef CONFIG_PHYLIB
-+ /* Phylib and MDIO interface */
-+ struct mii_bus *mii_bus;
-+ struct phy_device *phy_dev;
-+ phy_interface_t phy_interface;
-+#endif
- union {
- struct e1000_dev_spec_82575 _82575;
- } dev_spec;
---- a/drivers/net/ethernet/intel/igb/igb_main.c
-+++ b/drivers/net/ethernet/intel/igb/igb_main.c
-@@ -45,6 +45,7 @@
- #include <linux/if_vlan.h>
- #include <linux/pci.h>
- #include <linux/pci-aspm.h>
-+#include <linux/phy.h>
- #include <linux/delay.h>
- #include <linux/interrupt.h>
- #include <linux/ip.h>
-@@ -2191,6 +2192,126 @@ static s32 igb_init_i2c(struct igb_adapt
- return status;
- }
-
-+
-+#ifdef CONFIG_PHYLIB
-+/*
-+ * MMIO/PHYdev support
-+ */
-+
-+static int igb_enet_mdio_read(struct mii_bus *bus, int mii_id, int regnum)
-+{
-+ struct e1000_hw *hw = bus->priv;
-+ u16 out;
-+ int err;
-+
-+ err = igb_read_reg_gs40g(hw, mii_id, regnum, &out);
-+ if (err)
-+ return err;
-+ return out;
-+}
-+
-+static int igb_enet_mdio_write(struct mii_bus *bus, int mii_id, int regnum,
-+ u16 val)
-+{
-+ struct e1000_hw *hw = bus->priv;
-+
-+ return igb_write_reg_gs40g(hw, mii_id, regnum, val);
-+}
-+
-+static int igb_enet_mdio_reset(struct mii_bus *bus)
-+{
-+ udelay(300);
-+ return 0;
-+}
-+
-+static void igb_enet_mii_link(struct net_device *netdev)
-+{
-+}
-+
-+/* Probe the mdio bus for phys and connect them */
-+static int igb_enet_mii_probe(struct net_device *netdev)
-+{
-+ struct igb_adapter *adapter = netdev_priv(netdev);
-+ struct e1000_hw *hw = &adapter->hw;
-+ struct phy_device *phy_dev = NULL;
-+ int phy_id;
-+
-+ /* check for attached phy */
-+ for (phy_id = 0; (phy_id < PHY_MAX_ADDR); phy_id++) {
-+ if (hw->mii_bus->phy_map[phy_id]) {
-+ phy_dev = hw->mii_bus->phy_map[phy_id];
-+ break;
-+ }
-+ }
-+ if (!phy_dev) {
-+ netdev_err(netdev, "no PHY found\n");
-+ return -ENODEV;
-+ }
-+
-+ hw->phy_interface = PHY_INTERFACE_MODE_RGMII;
-+ phy_dev = phy_connect(netdev, dev_name(&phy_dev->dev),
-+ igb_enet_mii_link, hw->phy_interface);
-+ if (IS_ERR(phy_dev)) {
-+ netdev_err(netdev, "could not attach to PHY\n");
-+ return PTR_ERR(phy_dev);
-+ }
-+
-+ hw->phy_dev = phy_dev;
-+ netdev_info(netdev, "igb PHY driver [%s] (mii_bus:phy_addr=%s)\n",
-+ hw->phy_dev->drv->name, dev_name(&hw->phy_dev->dev));
-+
-+ return 0;
-+}
-+
-+/* Create and register mdio bus */
-+static int igb_enet_mii_init(struct pci_dev *pdev)
-+{
-+ struct mii_bus *mii_bus;
-+ struct net_device *netdev = pci_get_drvdata(pdev);
-+ struct igb_adapter *adapter = netdev_priv(netdev);
-+ struct e1000_hw *hw = &adapter->hw;
-+ int err;
-+
-+ mii_bus = mdiobus_alloc();
-+ if (mii_bus == NULL) {
-+ err = -ENOMEM;
-+ goto err_out;
-+ }
-+
-+ mii_bus->name = "igb_enet_mii_bus";
-+ mii_bus->read = igb_enet_mdio_read;
-+ mii_bus->write = igb_enet_mdio_write;
-+ mii_bus->reset = igb_enet_mdio_reset;
-+ snprintf(mii_bus->id, MII_BUS_ID_SIZE, "%s-%x",
-+ pci_name(pdev), hw->device_id + 1);
-+ mii_bus->priv = hw;
-+ mii_bus->parent = &pdev->dev;
-+ mii_bus->phy_mask = ~(1 << hw->phy.addr);
-+
-+ err = mdiobus_register(mii_bus);
-+ if (err) {
-+ printk(KERN_ERR "failed to register mii_bus: %d\n", err);
-+ goto err_out_free_mdiobus;
-+ }
-+ hw->mii_bus = mii_bus;
-+
-+ return 0;
-+
-+err_out_free_mdiobus:
-+ mdiobus_free(mii_bus);
-+err_out:
-+ return err;
-+}
-+
-+static void igb_enet_mii_remove(struct e1000_hw *hw)
-+{
-+ if (hw->mii_bus) {
-+ mdiobus_unregister(hw->mii_bus);
-+ mdiobus_free(hw->mii_bus);
-+ }
-+}
-+#endif /* CONFIG_PHYLIB */
-+
- /**
- * igb_probe - Device Initialization Routine
- * @pdev: PCI device information struct
-@@ -2593,6 +2714,13 @@ static int igb_probe(struct pci_dev *pde
- }
-
- pm_runtime_put_noidle(&pdev->dev);
-+
-+#ifdef CONFIG_PHYLIB
-+ /* create and register the mdio bus if using ext phy */
-+ if (rd32(E1000_MDICNFG) & E1000_MDICNFG_EXT_MDIO)
-+ igb_enet_mii_init(pdev);
-+#endif
-+
- return 0;
-
- err_register:
-@@ -2736,6 +2864,10 @@ static void igb_remove(struct pci_dev *p
- struct e1000_hw *hw = &adapter->hw;
-
- pm_runtime_get_noresume(&pdev->dev);
-+#ifdef CONFIG_PHYLIB
-+ if (rd32(E1000_MDICNFG) & E1000_MDICNFG_EXT_MDIO)
-+ igb_enet_mii_remove(hw);
-+#endif
- #ifdef CONFIG_IGB_HWMON
- igb_sysfs_exit(adapter);
- #endif
-@@ -3040,6 +3172,12 @@ static int __igb_open(struct net_device
- if (!resuming)
- pm_runtime_put(&pdev->dev);
-
-+#ifdef CONFIG_PHYLIB
-+ /* Probe and connect to PHY if using ext phy */
-+ if (rd32(E1000_MDICNFG) & E1000_MDICNFG_EXT_MDIO)
-+ igb_enet_mii_probe(netdev);
-+#endif
-+
- /* start the watchdog. */
- hw->mac.get_link_status = 1;
- schedule_work(&adapter->watchdog_task);
-@@ -7095,21 +7233,41 @@ void igb_alloc_rx_buffers(struct igb_rin
- static int igb_mii_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd)
- {
- struct igb_adapter *adapter = netdev_priv(netdev);
-+ struct e1000_hw *hw = &adapter->hw;
- struct mii_ioctl_data *data = if_mii(ifr);
-
-- if (adapter->hw.phy.media_type != e1000_media_type_copper)
-+ if (adapter->hw.phy.media_type != e1000_media_type_copper &&
-+ !(rd32(E1000_MDICNFG) & E1000_MDICNFG_EXT_MDIO))
- return -EOPNOTSUPP;
-
- switch (cmd) {
- case SIOCGMIIPHY:
-- data->phy_id = adapter->hw.phy.addr;
-+ data->phy_id = hw->phy.addr;
- break;
- case SIOCGMIIREG:
-- if (igb_read_phy_reg(&adapter->hw, data->reg_num & 0x1F,
-- &data->val_out))
-- return -EIO;
-+ if (hw->mac.type == e1000_i210 || hw->mac.type == e1000_i211) {
-+ if (igb_read_reg_gs40g(hw, data->phy_id,
-+ data->reg_num & 0x1F,
-+ &data->val_out))
-+ return -EIO;
-+ } else {
-+ if (igb_read_phy_reg(hw, data->reg_num & 0x1F,
-+ &data->val_out))
-+ return -EIO;
-+ }
- break;
- case SIOCSMIIREG:
-+ if (hw->mac.type == e1000_i210 || hw->mac.type == e1000_i211) {
-+ if (igb_write_reg_gs40g(hw, data->phy_id,
-+ data->reg_num & 0x1F,
-+ data->val_in))
-+ return -EIO;
-+ } else {
-+ if (igb_write_phy_reg(hw, data->reg_num & 0x1F,
-+ data->val_in))
-+ return -EIO;
-+ }
-+ break;
- default:
- return -EOPNOTSUPP;
- }
diff --git a/target/linux/imx6/patches-3.14/205-phy-add-driver-for-GW16083-Ethernet-Expansion-Mezzan.patch b/target/linux/imx6/patches-3.14/205-phy-add-driver-for-GW16083-Ethernet-Expansion-Mezzan.patch
deleted file mode 100644
index 1350d5a0bb..0000000000
--- a/target/linux/imx6/patches-3.14/205-phy-add-driver-for-GW16083-Ethernet-Expansion-Mezzan.patch
+++ /dev/null
@@ -1,27 +0,0 @@
---- a/drivers/net/phy/Kconfig
-+++ b/drivers/net/phy/Kconfig
-@@ -273,6 +273,14 @@ endif # RTL8366_SMI
-
- source "drivers/net/phy/b53/Kconfig"
-
-+config GATEWORKS_GW16083
-+ tristate "Gateworks GW16083 Ethernet Expansion Mezzanine"
-+ ---help---
-+ The Gateworks GW16083 Ethernet Expansion Mezzanine connects to a
-+ Gateworks Ventana baseboard and provides a 7-port GbE managed
-+ Ethernet switch with 4 dedicated GbE RJ45 ports, and 2 Gbe/SFP
-+ ports"
-+
- endif # PHYLIB
-
- config MICREL_KS8995MA
---- a/drivers/net/phy/Makefile
-+++ b/drivers/net/phy/Makefile
-@@ -39,6 +39,7 @@ obj-$(CONFIG_NATIONAL_PHY) += national.o
- obj-$(CONFIG_DP83640_PHY) += dp83640.o
- obj-$(CONFIG_STE10XP) += ste10Xp.o
- obj-$(CONFIG_MICREL_PHY) += micrel.o
-+obj-$(CONFIG_GATEWORKS_GW16083) += gw16083.o
- obj-$(CONFIG_MDIO_OCTEON) += mdio-octeon.o
- obj-$(CONFIG_MICREL_KS8995MA) += spi_ks8995.o
- obj-$(CONFIG_AT803X_PHY) += at803x.o
diff --git a/target/linux/imx6/patches-3.14/206-ARM-imx-ventana-added-GW16083-to-device-tree.patch b/target/linux/imx6/patches-3.14/206-ARM-imx-ventana-added-GW16083-to-device-tree.patch
deleted file mode 100644
index cc5f920267..0000000000
--- a/target/linux/imx6/patches-3.14/206-ARM-imx-ventana-added-GW16083-to-device-tree.patch
+++ /dev/null
@@ -1,56 +0,0 @@
---- a/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi
-+++ b/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi
-@@ -201,6 +201,11 @@
- };
- };
- };
-+
-+ gw16083: gw16083@52 {
-+ compatible = "gateworks,gw16083";
-+ reg = <0x52>;
-+ };
- };
-
- &i2c3 {
---- a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
-+++ b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
-@@ -268,6 +268,11 @@
- };
- };
- };
-+
-+ gw16083: gw16083@52 {
-+ compatible = "gateworks,gw16083";
-+ reg = <0x52>;
-+ };
- };
-
- &i2c3 {
---- a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
-+++ b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
-@@ -289,6 +289,11 @@
- };
- };
- };
-+
-+ gw16083: gw16083@52 {
-+ compatible = "gateworks,gw16083";
-+ reg = <0x52>;
-+ };
- };
-
- &i2c3 {
---- a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
-+++ b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
-@@ -317,6 +317,11 @@
- compatible = "sil,si52147";
- reg = <0x6b>;
- };
-+
-+ gw16083: gw16083@52 {
-+ compatible = "gateworks,gw16083";
-+ reg = <0x52>;
-+ };
- };
-
- &i2c3 {
diff --git a/target/linux/imx6/patches-3.14/208-ventana-plx-allow-override-gpio-output-mask.patch b/target/linux/imx6/patches-3.14/208-ventana-plx-allow-override-gpio-output-mask.patch
deleted file mode 100644
index 97298fd694..0000000000
--- a/target/linux/imx6/patches-3.14/208-ventana-plx-allow-override-gpio-output-mask.patch
+++ /dev/null
@@ -1,58 +0,0 @@
-This patch allows passing in the gpio output mask used for GPIO0-7 on the
-PLX PCIe bridge. These GPIO's are used for PERST# on the downstream ports.
-
-Allowing the kernel to override the default configuration allows for keeping
-specific devices held in reset. One important use of this is to allow
-temporarily disabling devices that may request too many resources such as
-an unprogrammed i210 device.
-
---- a/arch/arm/mach-imx/mach-imx6q.c
-+++ b/arch/arm/mach-imx/mach-imx6q.c
-@@ -84,6 +84,7 @@ static int ksz9031rn_phy_fixup(struct ph
- * fixup for PLX PEX8909 bridge to configure GPIO1-7 as output High
- * as they are used for slots1-7 PERST#
- */
-+unsigned int ventana_plx_gpio = 0xfe;
- static void ventana_pciesw_early_fixup(struct pci_dev *dev)
- {
- u32 dw;
-@@ -95,19 +96,25 @@ static void ventana_pciesw_early_fixup(s
- return;
-
- pci_read_config_dword(dev, 0x62c, &dw);
-+ dev_info(&dev->dev, "de-asserting downstream PERST# 0x%04x\n",
-+ ventana_plx_gpio);
- dw |= 0xaaa8; // GPIO1-7 outputs
- pci_write_config_dword(dev, 0x62c, dw);
--
-- pci_read_config_dword(dev, 0x644, &dw);
-- dw |= 0xfe; // GPIO1-7 output high
-- pci_write_config_dword(dev, 0x644, dw);
--
-+ pci_write_config_dword(dev, 0x644, ventana_plx_gpio);
- msleep(100);
- }
- DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_PLX, 0x8609, ventana_pciesw_early_fixup);
- DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_PLX, 0x8606, ventana_pciesw_early_fixup);
- DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_PLX, 0x8604, ventana_pciesw_early_fixup);
-
-+static int __init setup_ventana_plx_gpio(char *str)
-+{
-+ get_option(&str, &ventana_plx_gpio);
-+
-+ return 0;
-+}
-+early_param("plx_gpio", setup_ventana_plx_gpio);
-+
- static int ar8031_phy_fixup(struct phy_device *dev)
- {
- u16 val;
-@@ -328,7 +335,7 @@ static void __init imx6q_init_irq(void)
- irqchip_init();
- }
-
--static const char *imx6q_dt_compat[] __initconst = {
-+static const char *imx6q_dt_compat[] __initdata = {
- "fsl,imx6dl",
- "fsl,imx6q",
- NULL,
diff --git a/target/linux/imx6/patches-3.14/209-ventana-gw552x.patch b/target/linux/imx6/patches-3.14/209-ventana-gw552x.patch
deleted file mode 100644
index 7c7a295cf5..0000000000
--- a/target/linux/imx6/patches-3.14/209-ventana-gw552x.patch
+++ /dev/null
@@ -1,18 +0,0 @@
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -158,6 +158,7 @@ dtb-$(CONFIG_ARCH_MXC) += \
- imx6dl-gw52xx.dtb \
- imx6dl-gw53xx.dtb \
- imx6dl-gw54xx.dtb \
-+ imx6dl-gw552x.dtb \
- imx6dl-hummingboard.dtb \
- imx6dl-sabreauto.dtb \
- imx6dl-sabresd.dtb \
-@@ -169,6 +170,7 @@ dtb-$(CONFIG_ARCH_MXC) += \
- imx6q-gw53xx.dtb \
- imx6q-gw5400-a.dtb \
- imx6q-gw54xx.dtb \
-+ imx6q-gw552x.dtb \
- imx6q-phytec-pbab01.dtb \
- imx6q-sabreauto.dtb \
- imx6q-sabrelite.dtb \