diff options
Diffstat (limited to 'target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/ddr2')
3 files changed, 1518 insertions, 0 deletions
diff --git a/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/ddr2/mvCompVer.txt b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/ddr2/mvCompVer.txt new file mode 100644 index 0000000000..38a9264400 --- /dev/null +++ b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/ddr2/mvCompVer.txt @@ -0,0 +1,4 @@ +Global HAL Version: FEROCEON_HAL_3_1_7
+Unit HAL Version: 3.1.4
+Description: This component includes an implementation of the unit HAL drivers
+
diff --git a/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/ddr2/mvDramIfBasicInit.S b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/ddr2/mvDramIfBasicInit.S new file mode 100644 index 0000000000..76723816d5 --- /dev/null +++ b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/ddr2/mvDramIfBasicInit.S @@ -0,0 +1,986 @@ +/******************************************************************************* +Copyright (C) Marvell International Ltd. and its affiliates + +This software file (the "File") is owned and distributed by Marvell +International Ltd. and/or its affiliates ("Marvell") under the following +alternative licensing terms. Once you have made an election to distribute the +File under one of the following license alternatives, please (i) delete this +introductory statement regarding license alternatives, (ii) delete the two +license alternatives that you have not elected to use and (iii) preserve the +Marvell copyright notice above. + +******************************************************************************** +Marvell Commercial License Option + +If you received this File from Marvell and you have entered into a commercial +license agreement (a "Commercial License") with Marvell, the File is licensed +to you under the terms of the applicable Commercial License. + +******************************************************************************** +Marvell GPL License Option + +If you received this File from Marvell, you may opt to use, redistribute and/or +modify this File in accordance with the terms and conditions of the General +Public License Version 2, June 1991 (the "GPL License"), a copy of which is +available along with the File in the license.txt file or by writing to the Free +Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or +on the worldwide web at http://www.gnu.org/licenses/gpl.txt. + +THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED +WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY +DISCLAIMED. The GPL License provides additional details about this warranty +disclaimer. +******************************************************************************** +Marvell BSD License Option + +If you received this File from Marvell, you may opt to use, redistribute and/or +modify this File under the following licensing terms. +Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + + * Redistributions of source code must retain the above copyright notice, + this list of conditions and the following disclaimer. + + * Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + + * Neither the name of Marvell nor the names of its contributors may be + used to endorse or promote products derived from this software without + specific prior written permission. + +THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND +ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR +ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES +(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; +LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON +ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS +SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +*******************************************************************************/ + +#define _ASMLANGUAGE +#define MV_ASMLANGUAGE +#include "mvSysHwConfig.h" +#include "mvOsAsm.h" +#include "boardEnv/mvBoardEnvSpec.h" +#include "ctrlEnv/sys/mvCpuIfRegs.h" +#include "mvDramIfConfig.h" +#include "mvDramIfRegs.h" +#include "pex/mvPexRegs.h" +#include "ctrlEnv/mvCtrlEnvSpec.h" +#include "ctrlEnv/mvCtrlEnvAsm.h" +#include "mvCommon.h" + +/* defines */ + +#if defined(MV_STATIC_DRAM_ON_BOARD) +.globl dramBoot1 +dramBoot1: + .word 0 + +/****************************************************************************** +* +* +* +* +*******************************************************************************/ +#if defined(DB_MV78XX0) || defined(DB_MV88F632X) +/* DDR2 boards 512MB 333MHz */ +#define STATIC_SDRAM0_BANK0_SIZE 0x1ffffff1 /* 0x1504 */ +#define STATIC_SDRAM_CONFIG 0x43048C30 /* 0x1400 */ +#define STATIC_SDRAM_MODE 0x00000652 /* 0x141c */ +#define STATIC_DUNIT_CTRL_LOW 0x38543000 /* 0x1404 */ +#define STATIC_DUNIT_CTRL_HI 0x0000FFFF /* 0x1424 */ +#define STATIC_SDRAM_ADDR_CTRL 0x00000088 /* 0x1410 */ +#define STATIC_SDRAM_TIME_CTRL_LOW 0x22125441 /* 0x1408 */ +#define STATIC_SDRAM_TIME_CTRL_HI 0x00000A29 /* 0x140c */ +#define STATIC_SDRAM_ODT_CTRL_LOW 0x84210000 /* 0x1494 */ +#define STATIC_SDRAM_ODT_CTRL_HI 0x00000000 /* 0x1498 */ +#define STATIC_SDRAM_DUNIT_ODT_CTRL 0x0000E80F /* 0x149c */ +#define STATIC_SDRAM_EXT_MODE 0x00000040 /* 0x1420 */ +#define STATIC_SDRAM_DDR2_TIMING_LO 0x00085520 /* 0x1428 */ +#define STATIC_SDRAM_DDR2_TIMING_HI 0x00008552 /* 0x147C */ + +#elif defined(RD_MV78XX0_AMC) +/* On board DDR2 512MB 400MHz CL5 */ +#define STATIC_SDRAM0_BANK0_SIZE 0x1ffffff1 /* 0x1504 */ +#define STATIC_SDRAM_CONFIG 0x43008C30 /* 0x1400 */ +#define STATIC_SDRAM_MODE 0x00000652 /* 0x141c */ +#define STATIC_DUNIT_CTRL_LOW 0x38543000 /* 0x1404 */ +#define STATIC_DUNIT_CTRL_HI 0x0000F07F /* 0x1424 */ +#define STATIC_SDRAM_ADDR_CTRL 0x000000DD /* 0x1410 */ +#define STATIC_SDRAM_TIME_CTRL_LOW 0x23135441 /* 0x1408 */ +#define STATIC_SDRAM_TIME_CTRL_HI 0x00000A32 /* 0x140c */ +#define STATIC_SDRAM_ODT_CTRL_LOW 0x84210000 /* 0x1494 */ +#define STATIC_SDRAM_ODT_CTRL_HI 0x00000000 /* 0x1498 */ +#define STATIC_SDRAM_DUNIT_ODT_CTRL 0x0000EB0F /* 0x149c */ +#define STATIC_SDRAM_EXT_MODE 0x00000040 /* 0x1420 */ +#define STATIC_SDRAM_DDR2_TIMING_LO 0x00085520 /* 0x1428 */ +#define STATIC_SDRAM_DDR2_TIMING_HI 0x00008552 /* 0x147C */ + +#elif defined(RD_MV78XX0_H3C) +/* DDR2 boards 512MB 333MHz */ +#define STATIC_SDRAM0_BANK0_SIZE 0x1ffffff1 /* 0x1504 */ +#define STATIC_SDRAM_CONFIG 0x43048a25 /* 0x1400 */ +#define STATIC_SDRAM_MODE 0x00000652 /* 0x141c */ +#define STATIC_DUNIT_CTRL_LOW 0x38543000 /* 0x1404 */ +#define STATIC_DUNIT_CTRL_HI 0x0000F07F /* 0x1424 */ +#define STATIC_SDRAM_ADDR_CTRL 0x00000088 /* 0x1410 */ +#define STATIC_SDRAM_TIME_CTRL_LOW 0x2202444e /* 0x1408 */ +#define STATIC_SDRAM_TIME_CTRL_HI 0x00000A22 /* 0x140c */ +#define STATIC_SDRAM_ODT_CTRL_LOW 0x84210000 /* 0x1494 */ +#define STATIC_SDRAM_ODT_CTRL_HI 0x00000000 /* 0x1498 */ +#define STATIC_SDRAM_DUNIT_ODT_CTRL 0x0000EB0F /* 0x149c */ +#define STATIC_SDRAM_EXT_MODE 0x00000040 /* 0x1420 */ +#define STATIC_SDRAM_DDR2_TIMING_LO 0x00085520 /* 0x1428 */ +#define STATIC_SDRAM_DDR2_TIMING_HI 0x00008552 /* 0x147C */ + +#elif defined(RD_MV78XX0_PCAC) +/* DDR2 boards 256MB 200MHz */ +#define STATIC_SDRAM0_BANK0_SIZE 0x0ffffff1 /* 0x1504 */ +#define STATIC_SDRAM_CONFIG 0x43000a25 /* 0x1400 */ +#define STATIC_SDRAM_MODE 0x00000652 /* 0x141c */ +#define STATIC_DUNIT_CTRL_LOW 0x38543000 /* 0x1404 */ +#define STATIC_DUNIT_CTRL_HI 0x0000F07F /* 0x1424 */ +#define STATIC_SDRAM_ADDR_CTRL 0x000000DD /* 0x1410 */ +#define STATIC_SDRAM_TIME_CTRL_LOW 0x2202444e /* 0x1408 */ +#define STATIC_SDRAM_TIME_CTRL_HI 0x00000822 /* 0x140c */ +#define STATIC_SDRAM_ODT_CTRL_LOW 0x84210000 /* 0x1494 */ +#define STATIC_SDRAM_ODT_CTRL_HI 0x00000000 /* 0x1498 */ +#define STATIC_SDRAM_DUNIT_ODT_CTRL 0x0000EB0F /* 0x149c */ +#define STATIC_SDRAM_EXT_MODE 0x00000040 /* 0x1420 */ +#define STATIC_SDRAM_DDR2_TIMING_LO 0x00085520 /* 0x1428 */ +#define STATIC_SDRAM_DDR2_TIMING_HI 0x00008552 /* 0x147C */ + +#else +/* DDR2 MV88F6281 boards 256MB 400MHz */ +#define STATIC_SDRAM0_BANK0_SIZE 0x0FFFFFF1 /* 0x1504 */ +#define STATIC_SDRAM_CONFIG 0x43000c30 /* 0x1400 */ +#define STATIC_SDRAM_MODE 0x00000C52 /* 0x141c */ +#define STATIC_DUNIT_CTRL_LOW 0x39543000 /* 0x1404 */ +#define STATIC_DUNIT_CTRL_HI 0x0000F1FF /* 0x1424 */ +#define STATIC_SDRAM_ADDR_CTRL 0x000000cc /* 0x1410 */ +#define STATIC_SDRAM_TIME_CTRL_LOW 0x22125451 /* 0x1408 */ +#define STATIC_SDRAM_TIME_CTRL_HI 0x00000A33 /* 0x140c */ +#define STATIC_SDRAM_ODT_CTRL_LOW 0x003C0000 /* 0x1494 */ +#define STATIC_SDRAM_ODT_CTRL_HI 0x00000000 /* 0x1498 */ +#define STATIC_SDRAM_DUNIT_ODT_CTRL 0x0000F80F /* 0x149c */ +#define STATIC_SDRAM_EXT_MODE 0x00000042 /* 0x1420 */ +#define STATIC_SDRAM_DDR2_TIMING_LO 0x00085520 /* 0x1428 */ +#define STATIC_SDRAM_DDR2_TIMING_HI 0x00008552 /* 0x147C */ +#endif /* MV78XX0 */ + + .globl _mvDramIfStaticInit +_mvDramIfStaticInit: + + mov r11, LR /* Save link register */ + mov r10, r2 + +#ifdef MV78XX0 + MV_REG_READ_ASM (r6, r5, SDRAM_DUNIT_CTRL_REG) + orr r6, r6, #BIT4 /* Enable 2T mode */ + bic r6, r6, #BIT6 /* clear ctrlPos */ + MV_REG_WRITE_ASM (r6, r5, SDRAM_DUNIT_CTRL_REG) +#endif + + /*DDR SDRAM Initialization Control */ + ldr r6, =DSICR_INIT_EN + MV_REG_WRITE_ASM (r6, r1, DDR_SDRAM_INIT_CTRL_REG) +2: MV_REG_READ_ASM (r6, r1, DDR_SDRAM_INIT_CTRL_REG) + and r6, r6, #DSICR_INIT_EN + cmp r6, #0 + bne 2b + + /* If we boot from NAND jump to DRAM address */ + mov r5, #1 + ldr r6, =dramBoot1 + str r5, [r6] /* We started executing from DRAM */ + + ldr r6, dramBoot1 + cmp r6, #0 + bne 1f + + /* set all dram windows to 0 */ + mov r6, #0 + MV_REG_WRITE_ASM(r6, r5, SDRAM_SIZE_REG(0,0)) + MV_REG_WRITE_ASM(r6, r5, SDRAM_SIZE_REG(0,1)) + MV_REG_WRITE_ASM(r6, r5, SDRAM_SIZE_REG(0,2)) + MV_REG_WRITE_ASM(r6, r5, SDRAM_SIZE_REG(0,3)) + ldr r6, = STATIC_SDRAM0_BANK0_SIZE + MV_REG_WRITE_ASM(r6, r5, SDRAM_SIZE_REG(0,0)) + + + /* set all dram configuration in temp registers */ + ldr r6, = STATIC_SDRAM0_BANK0_SIZE + MV_REG_WRITE_ASM(r6, r5, DRAM_BUF_REG0) + ldr r6, = STATIC_SDRAM_CONFIG + MV_REG_WRITE_ASM(r6, r5, DRAM_BUF_REG1) + ldr r6, = STATIC_SDRAM_MODE + MV_REG_WRITE_ASM(r6, r5, DRAM_BUF_REG2) + ldr r6, = STATIC_DUNIT_CTRL_LOW + MV_REG_WRITE_ASM(r6, r5, DRAM_BUF_REG3) + ldr r6, = STATIC_SDRAM_ADDR_CTRL + MV_REG_WRITE_ASM(r6, r5, DRAM_BUF_REG4) + ldr r6, = STATIC_SDRAM_TIME_CTRL_LOW + MV_REG_WRITE_ASM(r6, r5, DRAM_BUF_REG5) + ldr r6, = STATIC_SDRAM_TIME_CTRL_HI + MV_REG_WRITE_ASM(r6, r5, DRAM_BUF_REG6) + ldr r6, = STATIC_SDRAM_ODT_CTRL_LOW + MV_REG_WRITE_ASM(r6, r5, DRAM_BUF_REG7) + ldr r6, = STATIC_SDRAM_ODT_CTRL_HI + MV_REG_WRITE_ASM(r6, r5, DRAM_BUF_REG8) + ldr r6, = STATIC_SDRAM_DUNIT_ODT_CTRL + MV_REG_WRITE_ASM(r6, r5, DRAM_BUF_REG9) + ldr r6, = STATIC_SDRAM_EXT_MODE + MV_REG_WRITE_ASM(r6, r5, DRAM_BUF_REG10) + ldr r6, = STATIC_SDRAM_DDR2_TIMING_LO + MV_REG_WRITE_ASM(r6, r5, DRAM_BUF_REG11) + ldr r6, = STATIC_SDRAM_DDR2_TIMING_HI + MV_REG_WRITE_ASM(r6, r5, DRAM_BUF_REG12) +#ifndef MV_NAND_BOOT + ldr r6, = STATIC_DUNIT_CTRL_HI + MV_REG_WRITE_ASM(r6, r5, DRAM_BUF_REG13) +#endif + + ldr sp,=0 + bl _mvDramIfConfig + ldr r0, =0 +#ifdef MV78XX0 + bl _mvDramIfEccMemInit +#endif +1: + mov r2, r10 + mov PC, r11 /* r11 is saved link register */ + +#else /* #if defined(MV_STATIC_DRAM_ON_BOARD) */ + +.globl dramBoot1 +dramBoot1: + .word 0 + +/******************************************************************************* +* mvDramIfBasicInit - Basic initialization of DRAM interface +* +* DESCRIPTION: +* The function will initialize the DRAM for basic usage. The function +* will use the TWSI assembly API to extract DIMM parameters according +* to which DRAM interface will be initialized. +* The function referes to the following DRAM parameters: +* 1) DIMM is registered or not. +* 2) DIMM width detection. +* 3) DIMM density. +* +* INPUT: +* r3 - required size for initial DRAM. +* +* OUTPUT: +* None. +* +* RETURN: +* None. +* +* Note: +* r4 holds I2C EEPROM address +* r5 holds SDRAM register base address +* r7 holds returned values +* r8 holds SDRAM various configuration registers value. +* r11 holds return function address. +*******************************************************************************/ +/* Setting the offsets of the I2C registers */ +#define DIMM_TYPE_OFFSET 2 +#define NUM_OF_ROWS_OFFSET 3 +#define NUM_OF_COLS_OFFSET 4 +#define NUM_OF_RANKS 5 +#define DIMM_CONFIG_TYPE 11 +#define SDRAM_WIDTH_OFFSET 13 +#define NUM_OF_BANKS_OFFSET 17 +#define SUPPORTED_CL_OFFSET 18 +#define DIMM_TYPE_INFO_OFFSET 20 /* DDR2 only */ +#define SDRAM_MODULES_ATTR_OFFSET 21 +#define RANK_SIZE_OFFSET 31 + +#define DRAM_DEV_DENSITY_128M 128 +#define DRAM_DEV_DENSITY_256M 256 +#define DRAM_DEV_DENSITY_512M 512 +#define DRAM_DEV_DENSITY_1G 1024 +#define DRAM_DEV_DENSITY_2G 2048 + +#define DRAM_RANK_DENSITY_128M 0x20 +#define DRAM_RANK_DENSITY_256M 0x40 +#define DRAM_RANK_DENSITY_512M 0x80 +#define DRAM_RANK_DENSITY_1G 0x1 +#define DRAM_RANK_DENSITY_2G 0x2 + + .globl _mvDramIfBasicInit + .extern _i2cInit +_mvDramIfBasicInit: + + mov r11, LR /* Save link register */ + + /* Set Dunit high control register */ + MV_REG_READ_ASM (r6, r5, SDRAM_DUNIT_CTRL_HI_REG) + orr r6, r6, #BIT7 /* SDRAM__D2P_EN */ + orr r6, r6, #BIT8 /* SDRAM__P2D_EN */ +#ifdef MV78XX0 + orr r6, r6, #BIT9 /* SDRAM__ADD_HALF_FCC_EN */ + orr r6, r6, #BIT10 /* SDRAM__PUP_ZERO_SKEW_EN */ + orr r6, r6, #BIT11 /* SDRAM__WR_MASH_DELAY_EN */ +#endif + MV_REG_WRITE_ASM (r6, r5, SDRAM_DUNIT_CTRL_HI_REG) + +#ifdef MV78XX0 + MV_REG_READ_ASM (r6, r5, SDRAM_DUNIT_CTRL_REG) + orr r6, r6, #BIT4 /* Enable 2T mode */ + bic r6, r6, #BIT6 /* clear ctrlPos */ + MV_REG_WRITE_ASM (r6, r5, SDRAM_DUNIT_CTRL_REG) +#endif + + /*DDR SDRAM Initialization Control */ + ldr r6, =DSICR_INIT_EN + MV_REG_WRITE_ASM (r6, r1, DDR_SDRAM_INIT_CTRL_REG) +2: MV_REG_READ_ASM (r6, r1, DDR_SDRAM_INIT_CTRL_REG) + and r6, r6, #DSICR_INIT_EN + cmp r6, #0 + bne 2b + + mov r5, #1 + ldr r8, =dramBoot1 + str r5, [r8] /* We started executing from DRAM */ + + /* If we boot from NAND jump to DRAM address */ + ldr r8, dramBoot1 + cmp r8, #0 + movne pc, r11 + + bl _i2cInit /* Initialize TWSI master */ + + /* Check if we have more then 1 dimm */ + ldr r6, =0 + MV_REG_WRITE_ASM (r6, r1, DRAM_BUF_REG14) +#ifdef MV78XX0 + bl _is_Second_Dimm_Exist + beq single_dimm + ldr r6, =1 + MV_REG_WRITE_ASM (r6, r1, DRAM_BUF_REG14) +single_dimm: + bl _i2cInit /* Initialize TWSI master */ +#endif + + /* Get default SDRAM Config values */ + MV_REG_READ_ASM (r8, r5, SDRAM_CONFIG_REG) + + /* Get registered/non registered info from DIMM */ + bl _is_Registered + beq nonRegistered + +setRegistered: + orr r8, r8, #SDRAM_REGISTERED /* Set registered bit(17) */ +nonRegistered: +#ifdef MV78XX0 + /* Get ECC/non ECC info from DIMM */ + bl _is_Ecc + beq setConfigReg + +setEcc: + orr r8, r8, #SDRAM_ECC_EN /* Set ecc bit(18) */ +#endif +setConfigReg: + MV_REG_WRITE_ASM (r8, r5, DRAM_BUF_REG1) + + /* Set maximum CL supported by DIMM */ + bl _get_CAL + + /* r7 is DIMM supported CAS (e.g: 3 --> 0x1C) */ + clz r6, r7 + rsb r6, r6, #31 /* r6 = the bit number of MAX CAS supported */ + +casDdr2: + ldr r7, =0x41 /* stBurstInDel|stBurstOutDel field value */ + ldr r3, =0x53 /* stBurstInDel|stBurstOutDel registered value*/ + ldr r8, =0x32 /* Assuming MAX CL = 3 */ + cmp r6, #3 /* If CL = 3 break */ + beq casDdr2Cont + + ldr r7, =0x53 /* stBurstInDel|stBurstOutDel field value */ + ldr r3, =0x65 /* stBurstInDel|stBurstOutDel registered value*/ + ldr r8, =0x42 /* Assuming MAX CL = 4 */ + cmp r6, #4 /* If CL = 4 break */ + beq casDdr2Cont + + ldr r7, =0x65 /* stBurstInDel|stBurstOutDel field value */ + ldr r3, =0x77 /* stBurstInDel|stBurstOutDel registered value*/ + ldr r8, =0x52 /* Assuming MAX CL = 5 */ + cmp r6, #5 /* If CL = 5 break */ + beq casDdr2Cont + + ldr r7, =0x77 /* stBurstInDel|stBurstOutDel field value */ + ldr r3, =0x89 /* stBurstInDel|stBurstOutDel registered value*/ + ldr r8, =0x62 /* Assuming MAX CL = 6 */ + cmp r6, #6 /* If CL = 5 break */ + beq casDdr2Cont + + /* This is an error. return */ + b exit_ddrAutoConfig /* This is an error !! */ +casDdr2Cont: + + /* Get default SDRAM Mode values */ + MV_REG_READ_ASM (r6, r5, SDRAM_MODE_REG) + bic r6, r6, #(BIT6 | BIT5 | BIT4) /* Clear CL filed */ + orr r6, r6, r8 + MV_REG_WRITE_ASM (r6, r5, DRAM_BUF_REG2) + + /* Set Dunit control register according to max CL detected */ + MV_REG_READ_ASM (r6, r5, DRAM_BUF_REG1) + tst r6, #SDRAM_REGISTERED + beq setDunitReg + mov r7, r3 + +setDunitReg: +#ifdef MV78XX0 + /* Set SDRAM Extended Mode register for double DIMM */ + /* Check DRAM frequency for more then 267MHz set ODT Rtt to 50ohm */ + + MV_REG_READ_ASM (r4, r5, CPU_RESET_SAMPLE_L_REG) + ldr r5, =MSAR_SYSCLCK_MASK + and r4, r4, r5 + ldr r5, =MSAR_SYSCLCK_333 + cmp r4, r5 + ble Clock333 + add r7, r7, #0x10 +Clock333: +#endif + + MV_REG_READ_ASM (r6, r5, SDRAM_DUNIT_CTRL_REG) + bic r6, r6, #(0xff << 20) /* Clear SBout and SBin */ + orr r6, r6, #BIT4 /* Enable 2T mode */ + bic r6, r6, #BIT6 /* clear ctrlPos */ + orr r6, r6, r7, LSL #20 + MV_REG_WRITE_ASM (r6, r5, DRAM_BUF_REG3) + + /* Set Dunit high control register */ + MV_REG_READ_ASM (r6, r5, SDRAM_DUNIT_CTRL_HI_REG) + orr r6, r6, #BIT7 /* SDRAM__D2P_EN */ + orr r6, r6, #BIT8 /* SDRAM__P2D_EN */ +#ifdef MV78XX0 + orr r6, r6, #BIT9 /* SDRAM__ADD_HALF_FCC_EN */ + orr r6, r6, #BIT10 /* SDRAM__PUP_ZERO_SKEW_EN */ + orr r6, r6, #BIT11 /* SDRAM__WR_MASH_DELAY_EN */ +#endif + MV_REG_WRITE_ASM (r6, r5, DRAM_BUF_REG13) + + /* DIMM density configuration*/ + /* Density = (1 << (rowNum + colNum)) * dramWidth * dramBankNum */ +Density: + /* Get bank 0 and 1 density */ + ldr r6, =0 + bl _getDensity + + mov r8, r7 + mov r8, r8, LSR #20 /* Move density 20 bits to the right */ + /* For example 0x10000000 --> 0x1000 */ + + mov r3, #(SDRAM_DSIZE_256Mb(0) | SDRAM_DSIZE_256Mb(1)) + cmp r8, #DRAM_DEV_DENSITY_256M + beq get_bank_2_density + + mov r3, #(SDRAM_DSIZE_512Mb(0) | SDRAM_DSIZE_512Mb(1)) + cmp r8, #DRAM_DEV_DENSITY_512M + beq get_bank_2_density + + mov r3, #(SDRAM_DSIZE_1Gb(0) | SDRAM_DSIZE_1Gb(1)) + cmp r8, #DRAM_DEV_DENSITY_1G + beq get_bank_2_density + + mov r3, #(SDRAM_DSIZE_2Gb(0) | SDRAM_DSIZE_2Gb(1)) + cmp r8, #DRAM_DEV_DENSITY_2G + beq get_bank_2_density + + /* This is an error. return */ + b exit_ddrAutoConfig + +get_bank_2_density: + /* Check for second dimm */ + MV_REG_READ_ASM (r6, r1, DRAM_BUF_REG14) + cmp r6, #1 + bne get_width + + /* Get bank 2 and 3 density */ + ldr r6, =2 + bl _getDensity + + mov r8, r7 + mov r8, r8, LSR #20 /* Move density 20 bits to the right */ + /* For example 0x10000000 --> 0x1000 */ + + orr r3, r3, #(SDRAM_DSIZE_256Mb(2) | SDRAM_DSIZE_256Mb(3)) + cmp r8, #DRAM_DEV_DENSITY_256M + beq get_width + + and r3, r3, #~(SDRAM_DSIZE_MASK(2) | SDRAM_DSIZE_MASK(3)) + orr r3, r3, #(SDRAM_DSIZE_512Mb(2) | SDRAM_DSIZE_512Mb(3)) + cmp r8, #DRAM_DEV_DENSITY_512M + beq get_width + + and r3, r3, #~(SDRAM_DSIZE_MASK(2) | SDRAM_DSIZE_MASK(3)) + orr r3, r3, #(SDRAM_DSIZE_1Gb(2) | SDRAM_DSIZE_1Gb(3)) + cmp r8, #DRAM_DEV_DENSITY_1G + beq get_width + + and r3, r3, #~(SDRAM_DSIZE_MASK(2) | SDRAM_DSIZE_MASK(3)) + orr r3, r3, #(SDRAM_DSIZE_2Gb(2) | SDRAM_DSIZE_2Gb(3)) + cmp r8, #DRAM_DEV_DENSITY_2G + beq get_width + + /* This is an error. return */ + b exit_ddrAutoConfig + + /* Get SDRAM width */ +get_width: + /* Get bank 0 and 1 width */ + ldr r6, =0 + bl _get_width + + cmp r7, #8 /* x8 devices */ + beq get_bank_2_width + + orr r3, r3, #(SDRAM_ADDRSEL_X16(0) | SDRAM_ADDRSEL_X16(1)) /* x16 devices */ + cmp r7, #16 + beq get_bank_2_width + + /* This is an error. return */ + b exit_ddrAutoConfig + +get_bank_2_width: + /* Check for second dimm */ + MV_REG_READ_ASM (r6, r1, DRAM_BUF_REG14) + cmp r6, #1 + bne densCont + + /* Get bank 2 and 3 width */ + ldr r6, =2 + bl _get_width + + cmp r7, #8 /* x8 devices */ + beq densCont + + orr r3, r3, #(SDRAM_ADDRSEL_X16(2) | SDRAM_ADDRSEL_X16(3)) /* x16 devices */ + cmp r7, #16 + beq densCont + + /* This is an error. return */ + b exit_ddrAutoConfig + +densCont: + MV_REG_WRITE_ASM (r3, r5, DRAM_BUF_REG4) + + /* Set SDRAM timing control low register */ + ldr r4, =SDRAM_TIMING_CTRL_LOW_REG_DEFAULT + /* MV_REG_READ_ASM (r4, r5, SDRAM_TIMING_CTRL_LOW_REG) */ + MV_REG_WRITE_ASM(r4, r5, DRAM_BUF_REG5) + + /* Set SDRAM timing control high register */ + ldr r6, =SDRAM_TIMING_CTRL_HIGH_REG_DEFAULT + + MV_REG_READ_ASM (r4, r5, CPU_RESET_SAMPLE_L_REG) + ldr r5, =MSAR_SYSCLCK_MASK + and r4, r4, r5 + ldr r5, =MSAR_SYSCLCK_333 + cmp r4, r5 + blt timingHighClock333 + orr r6, r6, #BIT9 + +timingHighClock333: + /* MV_REG_READ_ASM (r6, r5, SDRAM_TIMING_CTRL_HIGH_REG) */ + MV_REG_WRITE_ASM(r6, r5, DRAM_BUF_REG6) + + /* Check for second dimm */ + MV_REG_READ_ASM (r6, r1, DRAM_BUF_REG14) + cmp r6, #1 + bne single_dimm_odt + + /* Set SDRAM ODT control low register for double DIMM*/ + ldr r4, =DDR2_ODT_CTRL_LOW_CS0_CS1_CS2_CS3_DV + MV_REG_WRITE_ASM(r4, r5, DRAM_BUF_REG7) + + /* Set DUNIT ODT control register for double DIMM */ + ldr r4, =DDR2_DUNIT_ODT_CTRL_CS0_CS1_CS2_CS3_DV + MV_REG_WRITE_ASM(r4, r5, DRAM_BUF_REG9) + +#ifdef MV78XX0 + /* Set SDRAM Extended Mode register for double DIMM */ + /* Check DRAM frequency for more then 267MHz set ODT Rtt to 50ohm */ + + MV_REG_READ_ASM (r4, r5, CPU_RESET_SAMPLE_L_REG) + ldr r5, =MSAR_SYSCLCK_MASK + and r4, r4, r5 + ldr r5, =MSAR_SYSCLCK_267 + cmp r4, r5 + beq slow_dram_clock_rtt + ldr r5, =MSAR_SYSCLCK_300 + cmp r4, r5 + beq slow_dram_clock_rtt + ldr r5, =MSAR_SYSCLCK_333 + cmp r4, r5 + beq fast_dram_clock_rtt + ldr r5, =MSAR_SYSCLCK_400 + cmp r4, r5 + beq fast_dram_clock_rtt + + b slow_dram_clock_rtt + +fast_dram_clock_rtt: + ldr r4, =DDR_SDRAM_EXT_MODE_FAST_CS0_CS1_CS2_CS3_DV + MV_REG_WRITE_ASM(r4, r5, DRAM_BUF_REG10) + b odt_config_end +#endif +slow_dram_clock_rtt: + ldr r4, =DDR_SDRAM_EXT_MODE_CS0_CS1_CS2_CS3_DV + MV_REG_WRITE_ASM(r4, r5, DRAM_BUF_REG10) + b odt_config_end + +single_dimm_odt: + /* Set SDRAM ODT control low register */ + ldr r4, =DDR2_ODT_CTRL_LOW_CS0_CS1_DV + MV_REG_WRITE_ASM(r4, r5, DRAM_BUF_REG7) + + /* Set DUNIT ODT control register */ + ldr r4, =DDR2_DUNIT_ODT_CTRL_CS0_CS1_DV + MV_REG_WRITE_ASM(r4, r5, DRAM_BUF_REG9) + + /* Set SDRAM Extended Mode register */ + ldr r4, =DDR_SDRAM_EXT_MODE_CS0_CS1_DV + MV_REG_WRITE_ASM(r4, r5, DRAM_BUF_REG10) + +odt_config_end: + /* SDRAM ODT control high register is left as default */ + MV_REG_READ_ASM (r4, r5, DDR2_SDRAM_ODT_CTRL_HIGH_REG) + MV_REG_WRITE_ASM(r4, r5, DRAM_BUF_REG8) + + /*Read CL and set the DDR2 registers accordingly */ + MV_REG_READ_ASM (r6, r5, DRAM_BUF_REG2) + and r6, r6, #SDRAM_CL_MASK + mov r4, r6 + orr r4, r4, r6, LSL #4 + orr r4, r4, r6, LSL #8 + orr r4, r4, r6, LSL #12 + mov r5, #0x30000 + add r4, r4, r5 + sub r4, r4, #0x30 + /* Set SDRAM Ddr2 Timing Low register */ + MV_REG_WRITE_ASM(r4, r5, DRAM_BUF_REG11) + + /* Set SDRAM Ddr2 Timing High register */ + mov r4, r4, LSR #4 + MV_REG_WRITE_ASM(r4, r5, DRAM_BUF_REG12) + +timeParamDone: + /* Close all windows */ + MV_REG_READ_ASM (r6, r5, SDRAM_SIZE_REG(0,0)) + and r6, r6,#~SCSR_SIZE_MASK + and r6, r6,#~1 + MV_REG_WRITE_ASM (r6, r5, SDRAM_SIZE_REG(0,0)) + MV_REG_READ_ASM (r6, r5, SDRAM_SIZE_REG(0,1)) + and r6, r6,#~SCSR_SIZE_MASK + and r6, r6,#~1 + MV_REG_WRITE_ASM (r6, r5, SDRAM_SIZE_REG(0,1)) + MV_REG_READ_ASM (r6, r5, SDRAM_SIZE_REG(0,2)) + and r6, r6,#~SCSR_SIZE_MASK + and r6, r6,#~1 + MV_REG_WRITE_ASM (r6, r5, SDRAM_SIZE_REG(0,2)) + MV_REG_READ_ASM (r6, r5, SDRAM_SIZE_REG(0,3)) + and r6, r6,#~SCSR_SIZE_MASK + and r6, r6,#~1 + MV_REG_WRITE_ASM (r6, r5, SDRAM_SIZE_REG(0,3)) + + /* Set sdram bank 0 size and enable it */ + ldr r6, =0 + bl _mvDramIfGetDimmSizeFromSpd +#ifdef MV78XX0 + /* Check DRAM width */ + MV_REG_READ_ASM (r4, r5, SDRAM_CONFIG_REG) + ldr r5, =SDRAM_DWIDTH_MASK + and r4, r4, r5 + ldr r5, =SDRAM_DWIDTH_64BIT + cmp r4, r5 + beq dram_64bit_width + /* Utilize only 32bit width */ + mov r8, r8, LSR #1 +#else + /* Utilize only 16bit width */ + mov r8, r8, LSR #2 +#endif +dram_64bit_width: + /* Update first dimm size return value R8 */ + MV_REG_READ_ASM (r5, r6, SDRAM_SIZE_REG(0,0)) + ldr r6, =~SCSR_SIZE_MASK + and r5, r5, r6 + orr r5, r5, r8 + MV_REG_WRITE_ASM(r5, r8, SDRAM_SIZE_REG(0,0)) + + /* Clear bank 2 size */ + MV_REG_READ_ASM (r6, r5, SDRAM_SIZE_REG(0,2)) + and r6, r6,#~SCSR_SIZE_MASK + MV_REG_WRITE_ASM (r6, r5, SDRAM_SIZE_REG(0,2)) + + /* Check for second dimm */ + MV_REG_READ_ASM (r6, r1, DRAM_BUF_REG14) + cmp r6, #1 + bne defualt_order + + /* Set sdram bank 2 size */ + ldr r6, =2 + bl _mvDramIfGetDimmSizeFromSpd +#ifdef MV78XX0 + /* Check DRAM width */ + MV_REG_READ_ASM (r4, r5, SDRAM_CONFIG_REG) + ldr r5, =SDRAM_DWIDTH_MASK + and r4, r4, r5 + ldr r5, =SDRAM_DWIDTH_64BIT + cmp r4, r5 + beq dram_64bit_width2 + /* Utilize only 32bit width */ + mov r8, r8, LSR #1 +#else + /* Utilize only 16bit width */ + mov r8, r8, LSR #2 +#endif +dram_64bit_width2: + /* Update first dimm size return value R8 */ + MV_REG_READ_ASM (r5, r6, SDRAM_SIZE_REG(0,2)) + ldr r6, =~SCSR_SIZE_MASK + and r5, r5, r6 + orr r5, r5, r8 + MV_REG_WRITE_ASM(r5, r8, SDRAM_SIZE_REG(0,2)) + + /* Close windows 1 and 3 */ + MV_REG_READ_ASM (r6, r5, SDRAM_SIZE_REG(0,1)) + and r6, r6,#~1 + MV_REG_WRITE_ASM (r6, r5, SDRAM_SIZE_REG(0,1)) + MV_REG_READ_ASM (r6, r5, SDRAM_SIZE_REG(0,3)) + and r6, r6,#~1 + MV_REG_WRITE_ASM (r6, r5, SDRAM_SIZE_REG(0,3)) + + /* Check dimm size for setting dram bank order */ + MV_REG_READ_ASM (r6, r5, SDRAM_SIZE_REG(0,0)) + MV_REG_READ_ASM (r4, r5, SDRAM_SIZE_REG(0,2)) + and r6, r6,#SCSR_SIZE_MASK + and r4, r4,#SCSR_SIZE_MASK + cmp r6, r4 + bge defualt_order + + /* Bank 2 is biger then bank 0 */ + ldr r6,=0 + MV_REG_WRITE_ASM (r6, r5, SDRAM_BASE_ADDR_REG(0,2)) + + /* Open win 2 */ + MV_REG_READ_ASM (r6, r5, SDRAM_SIZE_REG(0,2)) + orr r6, r6,#1 + MV_REG_WRITE_ASM (r6, r5, SDRAM_SIZE_REG(0,2)) + + ldr sp,=0 + bl _mvDramIfConfig +#ifdef MV78XX0 + /* Init ECC on CS 2 */ + ldr r0, =2 + bl _mvDramIfEccMemInit +#endif + mov PC, r11 /* r11 is saved link register */ + +defualt_order: + + /* Open win 0 */ + MV_REG_READ_ASM (r6, r5, SDRAM_SIZE_REG(0,0)) + orr r6, r6,#1 + MV_REG_WRITE_ASM (r6, r5, SDRAM_SIZE_REG(0,0)) + + ldr sp,=0 + bl _mvDramIfConfig +#ifdef MV78XX0 + /* Init ECC on CS 0 */ + ldr r0, =0 + bl _mvDramIfEccMemInit +#endif +exit_ddrAutoConfig: + mov PC, r11 /* r11 is saved link register */ + + +/***************************************************************************************/ +/* r4 holds I2C EEPROM address + * r7 holds I2C EEPROM offset parameter for i2cRead and its --> returned value + * r8 holds SDRAM various configuration registers value. + * r13 holds Link register + */ +/**************************/ +_getDensity: + mov r13, LR /* Save link register */ + + /* Read SPD rank size from DIMM0 */ + mov r4, #MV_BOARD_DIMM0_I2C_ADDR /* reading from DIMM0 */ + + cmp r6, #0 + beq 1f + + /* Read SPD rank size from DIMM1 */ + mov r4, #MV_BOARD_DIMM1_I2C_ADDR /* reading from DIMM1 */ + +1: + mov r7, #NUM_OF_ROWS_OFFSET /* offset 3 */ + bl _i2cRead + mov r8, r7 /* r8 save number of rows */ + + mov r7, #NUM_OF_COLS_OFFSET /* offset 4 */ + bl _i2cRead + add r8, r8, r7 /* r8 = number of rows + number of col */ + + mov r7, #0x1 + mov r8, r7, LSL r8 /* r8 = (1 << r8) */ + + mov r7, #SDRAM_WIDTH_OFFSET /* offset 13 */ + bl _i2cRead + mul r8, r7, r8 + + mov r7, #NUM_OF_BANKS_OFFSET /* offset 17 */ + bl _i2cRead + mul r7, r8, r7 + + mov PC, r13 + +/**************************/ +_get_width: + mov r13, LR /* Save link register */ + + /* Read SPD rank size from DIMM0 */ + mov r4, #MV_BOARD_DIMM0_I2C_ADDR /* reading from DIMM0 */ + + cmp r6, #0 + beq 1f + + /* Read SPD rank size from DIMM1 */ + mov r4, #MV_BOARD_DIMM1_I2C_ADDR /* reading from DIMM1 */ + +1: + /* Get SDRAM width (SPD offset 13) */ + mov r7, #SDRAM_WIDTH_OFFSET + bl _i2cRead /* result in r7 */ + + mov PC, r13 + +/**************************/ +_get_CAL: + mov r13, LR /* Save link register */ + + /* Set maximum CL supported by DIMM */ + mov r4, #MV_BOARD_DIMM0_I2C_ADDR /* reading from DIMM0 */ + mov r7, #SUPPORTED_CL_OFFSET /* offset 18 */ + bl _i2cRead + + mov PC, r13 + +/**************************/ +/* R8 - sdram configuration register. + * Return value in flag if no-registered then Z-flag is set + */ +_is_Registered: + mov r13, LR /* Save link register */ +#if defined(MV645xx) + /* Get registered/non registered info from DIMM */ + tst r8, #SDRAM_DTYPE_DDR2 + bne regDdr2 + +regDdr1: + mov r4, #MV_BOARD_DIMM0_I2C_ADDR /* reading from DIMM0 */ + mov r7, #SDRAM_MODULES_ATTR_OFFSET + bl _i2cRead /* result in r7 */ + + tst r7, #0x2 + b exit +#endif +regDdr2: + mov r4, #MV_BOARD_DIMM0_I2C_ADDR /* reading from DIMM0 */ + mov r7, #DIMM_TYPE_INFO_OFFSET + bl _i2cRead /* result in r7 */ + + tst r7, #0x11 /* DIMM type = regular RDIMM (0x01) */ + /* or Mini-RDIMM (0x10) */ +exit: + mov PC, r13 + + +/**************************/ +/* Return value in flag if no-Ecc then Z-flag is set */ +_is_Ecc: + mov r13, LR /* Save link register */ + + mov r4, #MV_BOARD_DIMM0_I2C_ADDR /* reading from DIMM0 */ + mov r7, #DIMM_CONFIG_TYPE + bl _i2cRead /* result in r7 */ + + tst r7, #0x2 /* bit 1 -> Data ECC */ + mov PC, r13 + +/**************************/ +/* Return value in flag if no second DIMM then Z-flag is set */ +_is_Second_Dimm_Exist: + mov r13, LR /* Save link register */ + + mov r4, #MV_BOARD_DIMM1_I2C_ADDR /* reading from DIMM0 */ + mov r7, #DIMM_TYPE_OFFSET + bl _i2cRead /* result in r7 */ + + tst r7, #0x8 /* bit3 is '1' -> DDR 2 */ + mov PC, r13 + +/******************************************************************************* +* _mvDramIfGetDimmSizeFromSpd - read bank 0 dram's size +* +* DESCRIPTION: +* The function will read the bank 0 dram size(SPD version 1.0 and above ) +* +* INPUT: +* r6 - dram bank number. +* +* OUTPUT: +* none +*/ +_mvDramIfGetDimmSizeFromSpd: + + mov r13, LR /* Save link register */ + + /* Read SPD rank size from DIMM0 */ + mov r4, #MV_BOARD_DIMM0_I2C_ADDR /* reading from DIMM0 */ + + cmp r6, #0 + beq 1f + + /* Read SPD rank size from DIMM1 */ + mov r4, #MV_BOARD_DIMM1_I2C_ADDR /* reading from DIMM1 */ + +1: + mov r7, #RANK_SIZE_OFFSET /* offset 31 */ + bl _i2cRead + +pass_read: + ldr r8, =(0x7 << SCSR_SIZE_OFFS) + cmp r7, #DRAM_RANK_DENSITY_128M + beq endDimmSize + + ldr r8, =(0xf << SCSR_SIZE_OFFS) + cmp r7, #DRAM_RANK_DENSITY_256M + beq endDimmSize + + ldr r8, =(0x1f << SCSR_SIZE_OFFS) + cmp r7, #DRAM_RANK_DENSITY_512M + beq endDimmSize + + ldr r8, =(0x3f << SCSR_SIZE_OFFS) + cmp r7, #DRAM_RANK_DENSITY_1G + beq endDimmSize + + ldr r8, =(0x7f << SCSR_SIZE_OFFS) /* DRAM_RANK_DENSITY_2G */ +endDimmSize: + mov PC, r13 +#endif diff --git a/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/ddr2/mvDramIfConfig.S b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/ddr2/mvDramIfConfig.S new file mode 100644 index 0000000000..88527e58cc --- /dev/null +++ b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/ddr2/mvDramIfConfig.S @@ -0,0 +1,528 @@ +/******************************************************************************* +Copyright (C) Marvell International Ltd. and its affiliates + +This software file (the "File") is owned and distributed by Marvell +International Ltd. and/or its affiliates ("Marvell") under the following +alternative licensing terms. Once you have made an election to distribute the +File under one of the following license alternatives, please (i) delete this +introductory statement regarding license alternatives, (ii) delete the two +license alternatives that you have not elected to use and (iii) preserve the +Marvell copyright notice above. + +******************************************************************************** +Marvell Commercial License Option + +If you received this File from Marvell and you have entered into a commercial +license agreement (a "Commercial License") with Marvell, the File is licensed +to you under the terms of the applicable Commercial License. + +******************************************************************************** +Marvell GPL License Option + +If you received this File from Marvell, you may opt to use, redistribute and/or +modify this File in accordance with the terms and conditions of the General +Public License Version 2, June 1991 (the "GPL License"), a copy of which is +available along with the File in the license.txt file or by writing to the Free +Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or +on the worldwide web at http://www.gnu.org/licenses/gpl.txt. + +THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED +WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY +DISCLAIMED. The GPL License provides additional details about this warranty +disclaimer. +******************************************************************************** +Marvell BSD License Option + +If you received this File from Marvell, you may opt to use, redistribute and/or +modify this File under the following licensing terms. +Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + + * Redistributions of source code must retain the above copyright notice, + this list of conditions and the following disclaimer. + + * Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + + * Neither the name of Marvell nor the names of its contributors may be + used to endorse or promote products derived from this software without + specific prior written permission. + +THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND +ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR +ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES +(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; +LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON +ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS +SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +*******************************************************************************/ + +/******************************************************************************* +* mvDramIfBasicAsm.s +* +* DESCRIPTION: +* Memory full detection and best timing configuration is done in +* C code. C runtime environment requires a stack. This module API +* initialize DRAM interface chip select 0 for basic functionality for +* the use of stack. +* The module API assumes DRAM information is stored in I2C EEPROM reside +* in a given I2C address MV_BOARD_DIMM0_I2C_ADDR. The I2C EEPROM +* internal data structure is assumed to be orgenzied in common DRAM +* vendor SPD structure. +* NOTE: DFCDL values are assumed to be already initialized prior to +* this module API activity. +* +* +* DEPENDENCIES: +* None. +* +*******************************************************************************/ + +/* includes */ +#define _ASMLANGUAGE +#define MV_ASMLANGUAGE +#include "mvOsAsm.h" +#include "mvSysHwConfig.h" +#include "mvDramIfRegs.h" +#include "mvDramIfConfig.h" +#include "ctrlEnv/sys/mvCpuIfRegs.h" +#include "pex/mvPexRegs.h" +#include "ctrlEnv/mvCtrlEnvSpec.h" +#include "mvCommon.h" + +/* defines */ + +/* locals */ +.data +.globl _mvDramIfConfig +.text +.globl _mvDramIfMemInit + +/******************************************************************************* +* _mvDramIfConfig - Basic DRAM interface initialization. +* +* DESCRIPTION: +* The function will initialize the following DRAM parameters using the +* values prepared by mvDramIfDetect routine. Values are located +* in predefined registers. +* +* INPUT: +* None. +* +* OUTPUT: +* None. +* +* RETURN: +* None. +* +*******************************************************************************/ + +_mvDramIfConfig: + + /* Save register on stack */ + cmp sp, #0 + beq no_stack_s +save_on_stack: + stmdb sp!, {r1, r2, r3, r4} +no_stack_s: + + /* Dunit FTDLL Configuration Register */ + /* 0) Write to SDRAM FTDLL coniguration register */ + ldr r4, = SDRAM_FTDLL_REG_DEFAULT_LEFT; + ldr r1, =(INTER_REGS_BASE + SDRAM_FTDLL_CONFIG_LEFT_REG) + str r4, [r1] + ldr r4, = SDRAM_FTDLL_REG_DEFAULT_RIGHT; + ldr r1, =(INTER_REGS_BASE + SDRAM_FTDLL_CONFIG_RIGHT_REG) + str r4, [r1] + ldr r4, = SDRAM_FTDLL_REG_DEFAULT_UP; + ldr r1, =(INTER_REGS_BASE + SDRAM_FTDLL_CONFIG_UP_REG) + str r4, [r1] + + /* 1) Write to SDRAM coniguration register */ + ldr r1, =(INTER_REGS_BASE + DRAM_BUF_REG1) + ldr r4, [r1] + ldr r1, =(INTER_REGS_BASE + SDRAM_CONFIG_REG) + str r4, [r1] + + /* 2) Write Dunit control low register */ + ldr r1, =(INTER_REGS_BASE + DRAM_BUF_REG3) + ldr r4, [r1] + ldr r1, =(INTER_REGS_BASE + SDRAM_DUNIT_CTRL_REG) + str r4, [r1] + + /* 2) Write Dunit control high register */ + ldr r1, =(INTER_REGS_BASE + DRAM_BUF_REG13) + ldr r4, [r1] + ldr r1, =(INTER_REGS_BASE + SDRAM_DUNIT_CTRL_HI_REG) + str r4, [r1] + + /* 3) Write SDRAM address control register */ + ldr r1, =(INTER_REGS_BASE + DRAM_BUF_REG4) + ldr r4, [r1] + ldr r1, =(INTER_REGS_BASE + SDRAM_ADDR_CTRL_REG) + str r4, [r1] +#if defined(MV_STATIC_DRAM_ON_BOARD) + /* 4) Write SDRAM bank 0 size register */ + ldr r1, =(INTER_REGS_BASE + DRAM_BUF_REG0) + ldr r4, [r1] + ldr r1, =(INTER_REGS_BASE + SDRAM_SIZE_REG(0,0)) + str r4, [r1] +#endif + + /* 5) Write SDRAM open pages control register */ + ldr r1, =(INTER_REGS_BASE + SDRAM_OPEN_PAGE_CTRL_REG) + ldr r4, =SDRAM_OPEN_PAGES_CTRL_REG_DV + str r4, [r1] + + /* 6) Write SDRAM timing Low register */ + ldr r1, =(INTER_REGS_BASE + DRAM_BUF_REG5) + ldr r4, [r1] + ldr r1, =(INTER_REGS_BASE + SDRAM_TIMING_CTRL_LOW_REG) + str r4, [r1] + + /* 7) Write SDRAM timing High register */ + ldr r1, =(INTER_REGS_BASE + DRAM_BUF_REG6) + ldr r4, [r1] + ldr r1, =(INTER_REGS_BASE + SDRAM_TIMING_CTRL_HIGH_REG) + str r4, [r1] + + /* Config DDR2 On Die Termination (ODT) registers */ + /* Write SDRAM DDR2 ODT control low register */ + ldr r1, =(INTER_REGS_BASE + DRAM_BUF_REG7) + ldr r4, [r1] + ldr r1, =(INTER_REGS_BASE + DDR2_SDRAM_ODT_CTRL_LOW_REG) + str r4, [r1] + + /* Write SDRAM DDR2 ODT control high register */ + ldr r1, =(INTER_REGS_BASE + DRAM_BUF_REG8) + ldr r4, [r1] + ldr r1, =(INTER_REGS_BASE + DDR2_SDRAM_ODT_CTRL_HIGH_REG) + str r4, [r1] + + /* Write SDRAM DDR2 Dunit ODT control register */ + ldr r1, =(INTER_REGS_BASE + DRAM_BUF_REG9) + ldr r4, [r1] + ldr r1, =(INTER_REGS_BASE + DDR2_DUNIT_ODT_CONTROL_REG) + str r4, [r1] + + /* Write DDR2 SDRAM timing Low register */ + ldr r1, =(INTER_REGS_BASE + DRAM_BUF_REG11) + ldr r4, [r1] + ldr r1, =(INTER_REGS_BASE + SDRAM_DDR2_TIMING_LO_REG) + str r4, [r1] + + /* Write DDR2 SDRAM timing High register */ + ldr r1, =(INTER_REGS_BASE + DRAM_BUF_REG12) + ldr r4, [r1] + ldr r1, =(INTER_REGS_BASE + SDRAM_DDR2_TIMING_HI_REG) + str r4, [r1] + + /* 8) Write SDRAM mode register */ + /* The CPU must not attempt to change the SDRAM Mode register setting */ + /* prior to DRAM controller completion of the DRAM initialization */ + /* sequence. To guarantee this restriction, it is recommended that */ + /* the CPU sets the SDRAM Operation register to NOP command, performs */ + /* read polling until the register is back in Normal operation value, */ + /* and then sets SDRAM Mode register to its new value. */ + + /* 8.1 write 'nop' to SDRAM operation */ + mov r4, #0x5 /* 'NOP' command */ + MV_REG_WRITE_ASM(r4, r1, SDRAM_OPERATION_REG) + + /* 8.2 poll SDRAM operation. Make sure its back to normal operation */ +_sdramOpPoll1: + ldr r4, [r1] + cmp r4, #0 /* '0' = Normal SDRAM Mode */ + bne _sdramOpPoll1 + + /* 8.3 Now its safe to write new value to SDRAM Mode register */ + ldr r1, =(INTER_REGS_BASE + DRAM_BUF_REG2) + ldr r4, [r1] + ldr r1, =(INTER_REGS_BASE + SDRAM_MODE_REG) + str r4, [r1] + + /* 8.4 Make the Dunit write the DRAM its new mode */ + mov r4, #0x3 /* Mode Register Set command */ + MV_REG_WRITE_ASM (r4, r1, SDRAM_OPERATION_REG) + + /* 8.5 poll SDRAM operation. Make sure its back to normal operation */ +_sdramOpPoll2: + ldr r4, [r1] + cmp r4, #0 /* '0' = Normal SDRAM Mode */ + bne _sdramOpPoll2 + + /* Now its safe to write new value to SDRAM Extended Mode regist */ + ldr r1, =(INTER_REGS_BASE + DRAM_BUF_REG10) + ldr r4, [r1] + ldr r1, =(INTER_REGS_BASE + SDRAM_EXTENDED_MODE_REG) + str r4, [r1] + + /* 9) Write SDRAM Extended mode register This operation should be */ + /* done for each memory bank */ + /* write 'nop' to SDRAM operation */ + mov r4, #0x5 /* 'NOP' command */ + MV_REG_WRITE_ASM (r4, r1, SDRAM_OPERATION_REG) + + /* poll SDRAM operation. Make sure its back to normal operation */ +_sdramOpPoll3: + ldr r4, [r1] + cmp r4, #0 /* '0' = Normal SDRAM Mode */ + bne _sdramOpPoll3 + /* Go over each of the Banks */ + ldr r3, =0 /* r3 = DRAM bank Num */ + +extModeLoop: + /* Set the SDRAM Operation Control to each of the DRAM banks */ + mov r4, r3 /* Do not swap the bank counter value */ + MV_REG_WRITE_ASM (r4, r1, SDRAM_OPERATION_CTRL_REG) + + /* Make the Dunit write the DRAM its new mode */ + mov r4, #0x4 /* Extended Mode Register Set command */ + MV_REG_WRITE_ASM (r4, r1, SDRAM_OPERATION_REG) + + /* poll SDRAM operation. Make sure its back to normal operation */ +_sdramOpPoll4: + ldr r4, [r1] + cmp r4, #0 /* '0' = Normal SDRAM Mode */ + bne _sdramOpPoll4 + + add r3, r3, #1 + cmp r3, #4 /* 4 = Number of banks */ + bne extModeLoop + +extModeEnd: +cmp sp, #0 + beq no_stack_l + mov r1, LR /* Save link register */ +#if defined(MV78XX0) + bl _mvDramIfMemInit +#endif + mov LR,r1 /* restore link register */ +load_from_stack: + /* Restore registers */ + ldmia sp!, {r1, r2, r3, r4} +no_stack_l: + + mov pc, lr + + +/******************************************************************************* +* _mvDramIfEccMemInit - Basic DRAM ECC initialization. +* +* DESCRIPTION: +* +* INPUT: +* None. +* +* OUTPUT: +* None. +* +* RETURN: +* None. +* +*******************************************************************************/ +#define XOR_CHAN0 0 /* XOR channel 0 used for memory initialization */ +#define XOR_UNIT0 0 /* XOR unit 0 used for memory initialization */ +#define XOR_ADDR_DEC_WIN0 0 /* Enable DRAM access using XOR decode window 0 */ +/* XOR engine register offsets macros */ +#define XOR_CONFIG_REG(chan) (XOR_UNIT_BASE(0) + 0x10 + ((chan) * 4)) +#define XOR_ACTIVATION_REG(chan) (XOR_UNIT_BASE(0) + 0x20 + ((chan) * 4)) +#define XOR_CAUSE_REG (XOR_UNIT_BASE(0) + 0x30) +#define XOR_ERROR_CAUSE_REG (XOR_UNIT_BASE(0) + 0x50) +#define XOR_ERROR_ADDR_REG (XOR_UNIT_BASE(0) + 0x60) +#define XOR_INIT_VAL_LOW_REG (XOR_UNIT_BASE(0) + 0x2E0) +#define XOR_INIT_VAL_HIGH_REG (XOR_UNIT_BASE(0) + 0x2E4) +#define XOR_DST_PTR_REG(chan) (XOR_UNIT_BASE(0) + 0x2B0 + ((chan) * 4)) +#define XOR_BLOCK_SIZE_REG(chan) (XOR_UNIT_BASE(0) + 0x2C0 + ((chan) * 4)) + +/* XOR Engine Address Decoding Register Map */ +#define XOR_WINDOW_CTRL_REG(unit,chan) (XOR_UNIT_BASE(unit)+(0x240 + ((chan) * 4))) +#define XOR_BASE_ADDR_REG(unit,winNum) (XOR_UNIT_BASE(unit)+(0x250 + ((winNum) * 4))) +#define XOR_SIZE_MASK_REG(unit,winNum) (XOR_UNIT_BASE(unit)+(0x270 + ((winNum) * 4))) + +.globl _mvDramIfEccMemInit +/******************************************************************************* +* _mvDramIfEccMemInit - mem init for dram cs +* +* DESCRIPTION: +* This function will clean the cs by ussing the XOR mem init. +* +* INPUT: +* r0 - dram bank number. +* +* OUTPUT: +* none +*/ +_mvDramIfEccMemInit: + + /* Save register on stack */ + cmp sp, #0 + beq no_stack_s1 +save_on_stack1: + stmdb sp!, {r0,r1, r2, r3, r4, r5, r6} +no_stack_s1: + + ldr r1, = 0 + + /* Disable all XOR address decode windows to avoid possible overlap */ + MV_REG_WRITE_ASM (r1, r5, (XOR_WINDOW_CTRL_REG(XOR_UNIT0,XOR_CHAN0))) + + /* Init r5 to first XOR_SIZE_MASK_REG */ + mov r5, r0, LSL #3 + add r5, r5,#0x1500 + add r5, r5,#0x04 + add r5, r5,#(INTER_REGS_BASE) + ldr r6, [r5] + HTOLL(r6,r5) + MV_REG_WRITE_ASM (r6, r5, XOR_SIZE_MASK_REG(XOR_UNIT0,XOR_ADDR_DEC_WIN0)) + + mov r5, r0, LSL #3 + add r5, r5,#0x1500 + add r5, r5,#(INTER_REGS_BASE) + ldr r6, [r5] + /* Update destination & size */ + MV_REG_WRITE_ASM(r6, r5, XOR_DST_PTR_REG(XOR_CHAN0)) + HTOLL(r6,r5) + /* Init r6 to first XOR_BASE_ADDR_REG */ + ldr r4, = 0xf + ldr r5, = 0x1 + mov r5, r5, LSL r0 + bic r4, r4, r5 + mov r4, r4, LSL #8 + + orr r6, r6, r4 + MV_REG_WRITE_ASM (r6, r5, XOR_BASE_ADDR_REG(XOR_UNIT0,XOR_ADDR_DEC_WIN0)) + + ldr r6, = 0xff0001 + MV_REG_WRITE_ASM (r6, r5, XOR_WINDOW_CTRL_REG(XOR_UNIT0,XOR_CHAN0)) + + /* Configure XOR engine for memory init function. */ + MV_REG_READ_ASM (r6, r5, XOR_CONFIG_REG(XOR_CHAN0)) + and r6, r6, #~0x7 /* Clear operation mode field */ + orr r6, r6, #0x4 /* Set operation to memory init */ + MV_REG_WRITE_ASM(r6, r5, XOR_CONFIG_REG(XOR_CHAN0)) + + /* Set initVal in the XOR Engine Initial Value Registers */ + ldr r6, = 0xfeedfeed + MV_REG_WRITE_ASM(r6, r5, XOR_INIT_VAL_LOW_REG) + ldr r6, = 0xfeedfeed + MV_REG_WRITE_ASM(r6, r5, XOR_INIT_VAL_HIGH_REG) + + /* Set block size using DRAM bank size */ + + mov r5, r0, LSL #3 + add r5, r5,#0x1500 + add r5, r5,#0x04 + add r5, r5,#(INTER_REGS_BASE) + + ldr r6, [r5] + HTOLL(r6,r5) + and r6, r6, #SCSR_SIZE_MASK + mov r5, r6, LSR #SCSR_SIZE_OFFS + add r5, r5, #1 + mov r6, r5, LSL #SCSR_SIZE_OFFS + MV_REG_WRITE_ASM(r6, r5, XOR_BLOCK_SIZE_REG(XOR_CHAN0)) + + /* Clean interrupt cause*/ + MV_REG_WRITE_ASM(r1, r5, XOR_CAUSE_REG) + + /* Clean error interrupt cause*/ + MV_REG_READ_ASM(r6, r5, XOR_ERROR_CAUSE_REG) + MV_REG_READ_ASM(r6, r5, XOR_ERROR_ADDR_REG) + + /* Start transfer */ + MV_REG_READ_ASM (r6, r5, XOR_ACTIVATION_REG(XOR_CHAN0)) + orr r6, r6, #0x1 /* Preform start command */ + MV_REG_WRITE_ASM(r6, r5, XOR_ACTIVATION_REG(XOR_CHAN0)) + + /* Wait for engine to finish */ +waitForComplete: + MV_REG_READ_ASM(r6, r5, XOR_CAUSE_REG) + and r6, r6, #2 + cmp r6, #0 + beq waitForComplete + + /* Clear all error report registers */ + MV_REG_WRITE_ASM(r1, r5, SDRAM_SINGLE_BIT_ERR_CNTR_REG) + MV_REG_WRITE_ASM(r1, r5, SDRAM_DOUBLE_BIT_ERR_CNTR_REG) + + MV_REG_WRITE_ASM(r1, r5, SDRAM_ERROR_CAUSE_REG) + + cmp sp, #0 + beq no_stack_l1 +load_from_stack1: + ldmia sp!, {r0, r1, r2, r3, r4, r5, r6} +no_stack_l1: + mov pc, lr + + +/******************************************************************************* +* mvDramIfMemInit - Use XOR to clear all memory. +* +* DESCRIPTION: +* Use assembler function _mvDramIfEccMemInit to fill all memory with FEADFEAD pattern. +* INPUT: +* None. +* +* OUTPUT: +* None. +* +* RETURN: +* None. +* +*******************************************************************************/ +#if defined(MV78XX0) + +_mvDramIfMemInit: + stmdb sp!, {r0,r1, r2, r3, r4, r5, r6} + mov r6, LR /* Save link register */ + /* Check if dram bank 0 has to be init for ECC */ + MV_REG_READ_ASM (r0, r5, SDRAM_SIZE_REG(0,0)) + and r3, r0, #SCSR_WIN_EN + cmp r3, #0 + beq no_bank_0 + MV_REG_READ_ASM(r0, r5, SDRAM_BASE_ADDR_REG(0,0)) + cmp r0, #0 + beq no_bank_0 + mov r0,#0 + bl _mvDramIfEccMemInit + +no_bank_0: + /* Check if dram bank 1 has to be init for ECC */ + MV_REG_READ_ASM (r0, r5, SDRAM_SIZE_REG(0,1)) + and r0, r0, #SCSR_WIN_EN + cmp r0, #0 + beq no_bank_1 + mov r0,#1 + bl _mvDramIfEccMemInit +no_bank_1: + /* Check if dram bank 2 has to be init for ECC */ + MV_REG_READ_ASM (r0, r5, SDRAM_SIZE_REG(0,2)) + and r0, r0, #SCSR_WIN_EN + cmp r0, #0 + beq no_bank_2 + MV_REG_READ_ASM(r0, r5, SDRAM_BASE_ADDR_REG(0,2)) + cmp r0, #0 + beq no_bank_2 + mov r0,#2 + bl _mvDramIfEccMemInit + +no_bank_2: + /* Check if dram bank 3 has to be init for ECC */ + MV_REG_READ_ASM (r0, r5, SDRAM_SIZE_REG(0,3)) + and r0, r0, #SCSR_WIN_EN + cmp r0, #0 + beq no_bank_3 + mov r0,#3 + bl _mvDramIfEccMemInit +no_bank_3: + mov LR ,r6 /* restore link register */ + ldmia sp!, {r0, r1, r2, r3, r4, r5, r6} + mov pc, lr +#endif + |